From e5ae81300c1022c3873ad3067761107f2566f7a0 Mon Sep 17 00:00:00 2001 From: Federica Di Lauro Date: Tue, 25 Feb 2020 10:13:38 +0100 Subject: [PATCH] change uart baud rate to 9600 --- otto_controller/.mxproject | 2 + otto_controller/Core/Src/usart.c | 2 +- test_dma/.cproject | 177 - test_dma/.mxproject | 23 - test_dma/.project | 33 - test_dma/.settings/language.settings.xml | 27 - test_dma/Core/Inc/main.h | 71 - test_dma/Core/Inc/stm32f7xx_hal_conf.h | 442 - test_dma/Core/Inc/stm32f7xx_it.h | 73 - test_dma/Core/Src/main.c | 289 - test_dma/Core/Src/stm32f7xx_hal_msp.c | 198 - test_dma/Core/Src/stm32f7xx_it.c | 261 - test_dma/Core/Src/syscalls.c | 184 - test_dma/Core/Src/sysmem.c | 83 - test_dma/Core/Src/system_stm32f7xx.c | 278 - test_dma/Core/Startup/startup_stm32f767zitx.s | 634 - .../Device/ST/STM32F7xx/Include/stm32f767xx.h | 18631 ---------------- .../Device/ST/STM32F7xx/Include/stm32f7xx.h | 236 - .../ST/STM32F7xx/Include/system_stm32f7xx.h | 123 - test_dma/Drivers/CMSIS/Include/cmsis_armcc.h | 865 - .../Drivers/CMSIS/Include/cmsis_armclang.h | 1869 -- .../Drivers/CMSIS/Include/cmsis_compiler.h | 266 - test_dma/Drivers/CMSIS/Include/cmsis_gcc.h | 2085 -- test_dma/Drivers/CMSIS/Include/cmsis_iccarm.h | 935 - .../Drivers/CMSIS/Include/cmsis_version.h | 39 - .../Drivers/CMSIS/Include/core_armv8mbl.h | 1918 -- .../Drivers/CMSIS/Include/core_armv8mml.h | 2927 --- test_dma/Drivers/CMSIS/Include/core_cm0.h | 949 - test_dma/Drivers/CMSIS/Include/core_cm0plus.h | 1083 - test_dma/Drivers/CMSIS/Include/core_cm1.h | 976 - test_dma/Drivers/CMSIS/Include/core_cm23.h | 1993 -- test_dma/Drivers/CMSIS/Include/core_cm3.h | 1941 -- test_dma/Drivers/CMSIS/Include/core_cm33.h | 3002 --- test_dma/Drivers/CMSIS/Include/core_cm4.h | 2129 -- test_dma/Drivers/CMSIS/Include/core_cm7.h | 2671 --- test_dma/Drivers/CMSIS/Include/core_sc000.h | 1022 - test_dma/Drivers/CMSIS/Include/core_sc300.h | 1915 -- test_dma/Drivers/CMSIS/Include/mpu_armv7.h | 270 - test_dma/Drivers/CMSIS/Include/mpu_armv8.h | 333 - test_dma/Drivers/CMSIS/Include/tz_context.h | 70 - .../Inc/Legacy/stm32_hal_legacy.h | 3451 --- .../STM32F7xx_HAL_Driver/Inc/stm32f7xx_hal.h | 276 - .../Inc/stm32f7xx_hal_cortex.h | 406 - .../Inc/stm32f7xx_hal_def.h | 205 - .../Inc/stm32f7xx_hal_dma.h | 749 - .../Inc/stm32f7xx_hal_dma_ex.h | 185 - .../Inc/stm32f7xx_hal_exti.h | 260 - .../Inc/stm32f7xx_hal_flash.h | 418 - .../Inc/stm32f7xx_hal_flash_ex.h | 700 - .../Inc/stm32f7xx_hal_gpio.h | 309 - .../Inc/stm32f7xx_hal_gpio_ex.h | 658 - .../Inc/stm32f7xx_hal_i2c.h | 782 - .../Inc/stm32f7xx_hal_i2c_ex.h | 205 - .../Inc/stm32f7xx_hal_pwr.h | 404 - .../Inc/stm32f7xx_hal_pwr_ex.h | 262 - .../Inc/stm32f7xx_hal_rcc.h | 1310 -- .../Inc/stm32f7xx_hal_rcc_ex.h | 3524 --- .../Inc/stm32f7xx_hal_tim.h | 2166 -- .../Inc/stm32f7xx_hal_tim_ex.h | 355 - .../Inc/stm32f7xx_hal_uart.h | 1429 -- .../Inc/stm32f7xx_hal_uart_ex.h | 393 - .../STM32F7xx_HAL_Driver/Src/stm32f7xx_hal.c | 608 - .../Src/stm32f7xx_hal_cortex.c | 505 - .../Src/stm32f7xx_hal_dma.c | 1307 -- .../Src/stm32f7xx_hal_dma_ex.c | 310 - .../Src/stm32f7xx_hal_exti.c | 451 - .../Src/stm32f7xx_hal_flash.c | 817 - .../Src/stm32f7xx_hal_flash_ex.c | 1122 - .../Src/stm32f7xx_hal_gpio.c | 531 - .../Src/stm32f7xx_hal_i2c.c | 6523 ------ .../Src/stm32f7xx_hal_i2c_ex.c | 258 - .../Src/stm32f7xx_hal_pwr.c | 599 - .../Src/stm32f7xx_hal_pwr_ex.c | 554 - .../Src/stm32f7xx_hal_rcc.c | 1221 - .../Src/stm32f7xx_hal_rcc_ex.c | 1776 -- .../Src/stm32f7xx_hal_tim.c | 6880 ------ .../Src/stm32f7xx_hal_tim_ex.c | 2137 -- .../Src/stm32f7xx_hal_uart.c | 3471 --- .../Src/stm32f7xx_hal_uart_ex.c | 330 - test_dma/STM32F767ZITX_FLASH.ld | 200 - test_dma/STM32F767ZITX_RAM.ld | 200 - test_dma/test_dma.ioc | 141 - 82 files changed, 3 insertions(+), 99410 deletions(-) delete mode 100644 test_dma/.cproject delete mode 100644 test_dma/.mxproject delete mode 100644 test_dma/.project delete mode 100644 test_dma/.settings/language.settings.xml delete mode 100644 test_dma/Core/Inc/main.h delete mode 100644 test_dma/Core/Inc/stm32f7xx_hal_conf.h delete mode 100644 test_dma/Core/Inc/stm32f7xx_it.h delete mode 100644 test_dma/Core/Src/main.c delete mode 100644 test_dma/Core/Src/stm32f7xx_hal_msp.c delete mode 100644 test_dma/Core/Src/stm32f7xx_it.c delete mode 100644 test_dma/Core/Src/syscalls.c delete mode 100644 test_dma/Core/Src/sysmem.c delete mode 100644 test_dma/Core/Src/system_stm32f7xx.c delete mode 100644 test_dma/Core/Startup/startup_stm32f767zitx.s delete mode 100644 test_dma/Drivers/CMSIS/Device/ST/STM32F7xx/Include/stm32f767xx.h delete mode 100644 test_dma/Drivers/CMSIS/Device/ST/STM32F7xx/Include/stm32f7xx.h delete mode 100644 test_dma/Drivers/CMSIS/Device/ST/STM32F7xx/Include/system_stm32f7xx.h delete mode 100644 test_dma/Drivers/CMSIS/Include/cmsis_armcc.h delete mode 100644 test_dma/Drivers/CMSIS/Include/cmsis_armclang.h delete mode 100644 test_dma/Drivers/CMSIS/Include/cmsis_compiler.h delete mode 100644 test_dma/Drivers/CMSIS/Include/cmsis_gcc.h delete mode 100644 test_dma/Drivers/CMSIS/Include/cmsis_iccarm.h delete mode 100644 test_dma/Drivers/CMSIS/Include/cmsis_version.h delete mode 100644 test_dma/Drivers/CMSIS/Include/core_armv8mbl.h delete mode 100644 test_dma/Drivers/CMSIS/Include/core_armv8mml.h delete mode 100644 test_dma/Drivers/CMSIS/Include/core_cm0.h delete mode 100644 test_dma/Drivers/CMSIS/Include/core_cm0plus.h delete mode 100644 test_dma/Drivers/CMSIS/Include/core_cm1.h delete mode 100644 test_dma/Drivers/CMSIS/Include/core_cm23.h delete mode 100644 test_dma/Drivers/CMSIS/Include/core_cm3.h delete mode 100644 test_dma/Drivers/CMSIS/Include/core_cm33.h delete mode 100644 test_dma/Drivers/CMSIS/Include/core_cm4.h delete mode 100644 test_dma/Drivers/CMSIS/Include/core_cm7.h delete mode 100644 test_dma/Drivers/CMSIS/Include/core_sc000.h delete mode 100644 test_dma/Drivers/CMSIS/Include/core_sc300.h delete mode 100644 test_dma/Drivers/CMSIS/Include/mpu_armv7.h delete mode 100644 test_dma/Drivers/CMSIS/Include/mpu_armv8.h delete mode 100644 test_dma/Drivers/CMSIS/Include/tz_context.h delete mode 100644 test_dma/Drivers/STM32F7xx_HAL_Driver/Inc/Legacy/stm32_hal_legacy.h delete mode 100644 test_dma/Drivers/STM32F7xx_HAL_Driver/Inc/stm32f7xx_hal.h delete mode 100644 test_dma/Drivers/STM32F7xx_HAL_Driver/Inc/stm32f7xx_hal_cortex.h delete mode 100644 test_dma/Drivers/STM32F7xx_HAL_Driver/Inc/stm32f7xx_hal_def.h delete mode 100644 test_dma/Drivers/STM32F7xx_HAL_Driver/Inc/stm32f7xx_hal_dma.h delete mode 100644 test_dma/Drivers/STM32F7xx_HAL_Driver/Inc/stm32f7xx_hal_dma_ex.h delete mode 100644 test_dma/Drivers/STM32F7xx_HAL_Driver/Inc/stm32f7xx_hal_exti.h delete mode 100644 test_dma/Drivers/STM32F7xx_HAL_Driver/Inc/stm32f7xx_hal_flash.h delete mode 100644 test_dma/Drivers/STM32F7xx_HAL_Driver/Inc/stm32f7xx_hal_flash_ex.h delete mode 100644 test_dma/Drivers/STM32F7xx_HAL_Driver/Inc/stm32f7xx_hal_gpio.h delete mode 100644 test_dma/Drivers/STM32F7xx_HAL_Driver/Inc/stm32f7xx_hal_gpio_ex.h delete mode 100644 test_dma/Drivers/STM32F7xx_HAL_Driver/Inc/stm32f7xx_hal_i2c.h delete mode 100644 test_dma/Drivers/STM32F7xx_HAL_Driver/Inc/stm32f7xx_hal_i2c_ex.h delete mode 100644 test_dma/Drivers/STM32F7xx_HAL_Driver/Inc/stm32f7xx_hal_pwr.h delete mode 100644 test_dma/Drivers/STM32F7xx_HAL_Driver/Inc/stm32f7xx_hal_pwr_ex.h delete mode 100644 test_dma/Drivers/STM32F7xx_HAL_Driver/Inc/stm32f7xx_hal_rcc.h delete mode 100644 test_dma/Drivers/STM32F7xx_HAL_Driver/Inc/stm32f7xx_hal_rcc_ex.h delete mode 100644 test_dma/Drivers/STM32F7xx_HAL_Driver/Inc/stm32f7xx_hal_tim.h delete mode 100644 test_dma/Drivers/STM32F7xx_HAL_Driver/Inc/stm32f7xx_hal_tim_ex.h delete mode 100644 test_dma/Drivers/STM32F7xx_HAL_Driver/Inc/stm32f7xx_hal_uart.h delete mode 100644 test_dma/Drivers/STM32F7xx_HAL_Driver/Inc/stm32f7xx_hal_uart_ex.h delete mode 100644 test_dma/Drivers/STM32F7xx_HAL_Driver/Src/stm32f7xx_hal.c delete mode 100644 test_dma/Drivers/STM32F7xx_HAL_Driver/Src/stm32f7xx_hal_cortex.c delete mode 100644 test_dma/Drivers/STM32F7xx_HAL_Driver/Src/stm32f7xx_hal_dma.c delete mode 100644 test_dma/Drivers/STM32F7xx_HAL_Driver/Src/stm32f7xx_hal_dma_ex.c delete mode 100644 test_dma/Drivers/STM32F7xx_HAL_Driver/Src/stm32f7xx_hal_exti.c delete mode 100644 test_dma/Drivers/STM32F7xx_HAL_Driver/Src/stm32f7xx_hal_flash.c delete mode 100644 test_dma/Drivers/STM32F7xx_HAL_Driver/Src/stm32f7xx_hal_flash_ex.c delete mode 100644 test_dma/Drivers/STM32F7xx_HAL_Driver/Src/stm32f7xx_hal_gpio.c delete mode 100644 test_dma/Drivers/STM32F7xx_HAL_Driver/Src/stm32f7xx_hal_i2c.c delete mode 100644 test_dma/Drivers/STM32F7xx_HAL_Driver/Src/stm32f7xx_hal_i2c_ex.c delete mode 100644 test_dma/Drivers/STM32F7xx_HAL_Driver/Src/stm32f7xx_hal_pwr.c delete mode 100644 test_dma/Drivers/STM32F7xx_HAL_Driver/Src/stm32f7xx_hal_pwr_ex.c delete mode 100644 test_dma/Drivers/STM32F7xx_HAL_Driver/Src/stm32f7xx_hal_rcc.c delete mode 100644 test_dma/Drivers/STM32F7xx_HAL_Driver/Src/stm32f7xx_hal_rcc_ex.c delete mode 100644 test_dma/Drivers/STM32F7xx_HAL_Driver/Src/stm32f7xx_hal_tim.c delete mode 100644 test_dma/Drivers/STM32F7xx_HAL_Driver/Src/stm32f7xx_hal_tim_ex.c delete mode 100644 test_dma/Drivers/STM32F7xx_HAL_Driver/Src/stm32f7xx_hal_uart.c delete mode 100644 test_dma/Drivers/STM32F7xx_HAL_Driver/Src/stm32f7xx_hal_uart_ex.c delete mode 100644 test_dma/STM32F767ZITX_FLASH.ld delete mode 100644 test_dma/STM32F767ZITX_RAM.ld delete mode 100644 test_dma/test_dma.ioc diff --git a/otto_controller/.mxproject b/otto_controller/.mxproject index 68ed7a1..b4aeebb 100644 --- a/otto_controller/.mxproject +++ b/otto_controller/.mxproject @@ -20,6 +20,8 @@ SourceFiles#4=/home/fdila/Projects/otto/otto_controller/Core/Src/stm32f7xx_it.c SourceFiles#5=/home/fdila/Projects/otto/otto_controller/Core/Src/stm32f7xx_hal_msp.c HeaderFiles#6=/home/fdila/Projects/otto/otto_controller/Core/Inc/main.h SourceFiles#6=/home/fdila/Projects/otto/otto_controller/Core/Src/main.c +HeaderFiles=; +SourceFiles=; [PreviousLibFiles] LibFiles=Drivers/STM32F7xx_HAL_Driver/Inc/stm32f7xx_hal_cortex.h;Drivers/STM32F7xx_HAL_Driver/Inc/stm32f7xx_hal_tim.h;Drivers/STM32F7xx_HAL_Driver/Inc/stm32f7xx_hal_tim_ex.h;Drivers/STM32F7xx_HAL_Driver/Inc/stm32f7xx_hal_rcc.h;Drivers/STM32F7xx_HAL_Driver/Inc/stm32f7xx_hal_rcc_ex.h;Drivers/STM32F7xx_HAL_Driver/Inc/stm32f7xx_hal_flash.h;Drivers/STM32F7xx_HAL_Driver/Inc/stm32f7xx_hal_flash_ex.h;Drivers/STM32F7xx_HAL_Driver/Inc/stm32f7xx_hal_gpio.h;Drivers/STM32F7xx_HAL_Driver/Inc/stm32f7xx_hal_gpio_ex.h;Drivers/STM32F7xx_HAL_Driver/Inc/stm32f7xx_hal_dma.h;Drivers/STM32F7xx_HAL_Driver/Inc/stm32f7xx_hal_dma_ex.h;Drivers/STM32F7xx_HAL_Driver/Inc/stm32f7xx_hal_pwr.h;Drivers/STM32F7xx_HAL_Driver/Inc/stm32f7xx_hal_pwr_ex.h;Drivers/STM32F7xx_HAL_Driver/Inc/stm32f7xx_hal.h;Drivers/STM32F7xx_HAL_Driver/Inc/stm32f7xx_hal_def.h;Drivers/STM32F7xx_HAL_Driver/Inc/Legacy/stm32_hal_legacy.h;Drivers/STM32F7xx_HAL_Driver/Inc/stm32f7xx_hal_i2c.h;Drivers/STM32F7xx_HAL_Driver/Inc/stm32f7xx_hal_i2c_ex.h;Drivers/STM32F7xx_HAL_Driver/Inc/stm32f7xx_hal_exti.h;Drivers/STM32F7xx_HAL_Driver/Inc/stm32f7xx_hal_uart.h;Drivers/STM32F7xx_HAL_Driver/Inc/stm32f7xx_hal_uart_ex.h;Drivers/STM32F7xx_HAL_Driver/Src/stm32f7xx_hal_cortex.c;Drivers/STM32F7xx_HAL_Driver/Src/stm32f7xx_hal_tim.c;Drivers/STM32F7xx_HAL_Driver/Src/stm32f7xx_hal_tim_ex.c;Drivers/STM32F7xx_HAL_Driver/Src/stm32f7xx_hal_rcc.c;Drivers/STM32F7xx_HAL_Driver/Src/stm32f7xx_hal_rcc_ex.c;Drivers/STM32F7xx_HAL_Driver/Src/stm32f7xx_hal_flash.c;Drivers/STM32F7xx_HAL_Driver/Src/stm32f7xx_hal_flash_ex.c;Drivers/STM32F7xx_HAL_Driver/Src/stm32f7xx_hal_gpio.c;Drivers/STM32F7xx_HAL_Driver/Src/stm32f7xx_hal_dma.c;Drivers/STM32F7xx_HAL_Driver/Src/stm32f7xx_hal_dma_ex.c;Drivers/STM32F7xx_HAL_Driver/Src/stm32f7xx_hal_pwr.c;Drivers/STM32F7xx_HAL_Driver/Src/stm32f7xx_hal_pwr_ex.c;Drivers/STM32F7xx_HAL_Driver/Src/stm32f7xx_hal.c;Drivers/STM32F7xx_HAL_Driver/Src/stm32f7xx_hal_i2c.c;Drivers/STM32F7xx_HAL_Driver/Src/stm32f7xx_hal_i2c_ex.c;Drivers/STM32F7xx_HAL_Driver/Src/stm32f7xx_hal_exti.c;Drivers/STM32F7xx_HAL_Driver/Src/stm32f7xx_hal_uart.c;Drivers/STM32F7xx_HAL_Driver/Src/stm32f7xx_hal_uart_ex.c;Drivers/STM32F7xx_HAL_Driver/Inc/stm32f7xx_hal_cortex.h;Drivers/STM32F7xx_HAL_Driver/Inc/stm32f7xx_hal_tim.h;Drivers/STM32F7xx_HAL_Driver/Inc/stm32f7xx_hal_tim_ex.h;Drivers/STM32F7xx_HAL_Driver/Inc/stm32f7xx_hal_rcc.h;Drivers/STM32F7xx_HAL_Driver/Inc/stm32f7xx_hal_rcc_ex.h;Drivers/STM32F7xx_HAL_Driver/Inc/stm32f7xx_hal_flash.h;Drivers/STM32F7xx_HAL_Driver/Inc/stm32f7xx_hal_flash_ex.h;Drivers/STM32F7xx_HAL_Driver/Inc/stm32f7xx_hal_gpio.h;Drivers/STM32F7xx_HAL_Driver/Inc/stm32f7xx_hal_gpio_ex.h;Drivers/STM32F7xx_HAL_Driver/Inc/stm32f7xx_hal_dma.h;Drivers/STM32F7xx_HAL_Driver/Inc/stm32f7xx_hal_dma_ex.h;Drivers/STM32F7xx_HAL_Driver/Inc/stm32f7xx_hal_pwr.h;Drivers/STM32F7xx_HAL_Driver/Inc/stm32f7xx_hal_pwr_ex.h;Drivers/STM32F7xx_HAL_Driver/Inc/stm32f7xx_hal.h;Drivers/STM32F7xx_HAL_Driver/Inc/stm32f7xx_hal_def.h;Drivers/STM32F7xx_HAL_Driver/Inc/Legacy/stm32_hal_legacy.h;Drivers/STM32F7xx_HAL_Driver/Inc/stm32f7xx_hal_i2c.h;Drivers/STM32F7xx_HAL_Driver/Inc/stm32f7xx_hal_i2c_ex.h;Drivers/STM32F7xx_HAL_Driver/Inc/stm32f7xx_hal_exti.h;Drivers/STM32F7xx_HAL_Driver/Inc/stm32f7xx_hal_uart.h;Drivers/STM32F7xx_HAL_Driver/Inc/stm32f7xx_hal_uart_ex.h;Drivers/CMSIS/Device/ST/STM32F7xx/Include/stm32f767xx.h;Drivers/CMSIS/Device/ST/STM32F7xx/Include/stm32f7xx.h;Drivers/CMSIS/Device/ST/STM32F7xx/Include/system_stm32f7xx.h;Drivers/CMSIS/Device/ST/STM32F7xx/Source/Templates/system_stm32f7xx.c;Drivers/CMSIS/Include/cmsis_gcc.h;Drivers/CMSIS/Include/core_cm3.h;Drivers/CMSIS/Include/core_armv8mml.h;Drivers/CMSIS/Include/cmsis_armcc.h;Drivers/CMSIS/Include/core_sc300.h;Drivers/CMSIS/Include/core_cm33.h;Drivers/CMSIS/Include/core_cm0.h;Drivers/CMSIS/Include/core_cm1.h;Drivers/CMSIS/Include/tz_context.h;Drivers/CMSIS/Include/cmsis_armclang.h;Drivers/CMSIS/Include/core_cm7.h;Drivers/CMSIS/Include/cmsis_compiler.h;Drivers/CMSIS/Include/cmsis_iccarm.h;Drivers/CMSIS/Include/core_cm23.h;Drivers/CMSIS/Include/core_armv8mbl.h;Drivers/CMSIS/Include/core_cm0plus.h;Drivers/CMSIS/Include/mpu_armv7.h;Drivers/CMSIS/Include/mpu_armv8.h;Drivers/CMSIS/Include/cmsis_version.h;Drivers/CMSIS/Include/core_sc000.h;Drivers/CMSIS/Include/core_cm4.h; diff --git a/otto_controller/Core/Src/usart.c b/otto_controller/Core/Src/usart.c index 6f25222..351f86b 100644 --- a/otto_controller/Core/Src/usart.c +++ b/otto_controller/Core/Src/usart.c @@ -34,7 +34,7 @@ void MX_USART6_UART_Init(void) { huart6.Instance = USART6; - huart6.Init.BaudRate = 115200; + huart6.Init.BaudRate = 9600; huart6.Init.WordLength = UART_WORDLENGTH_8B; huart6.Init.StopBits = UART_STOPBITS_1; huart6.Init.Parity = UART_PARITY_NONE; diff --git a/test_dma/.cproject b/test_dma/.cproject deleted file mode 100644 index 4ce8617..0000000 --- a/test_dma/.cproject +++ /dev/null @@ -1,177 +0,0 @@ - - - - - - - - - - - - - - - - - - - - - - - - - - - - - - - - - - - - - - - - - - - - - - - - - - - - - - - - - - - - - - - - - - - - - - diff --git a/test_dma/.mxproject b/test_dma/.mxproject deleted file mode 100644 index 6aebfd2..0000000 --- a/test_dma/.mxproject +++ /dev/null @@ -1,23 +0,0 @@ -[PreviousGenFiles] -AdvancedFolderStructure=true -HeaderFileListSize=3 -HeaderFiles#0=/home/fdila/Projects/otto/test_dma/Core/Inc/stm32f7xx_it.h -HeaderFiles#1=/home/fdila/Projects/otto/test_dma/Core/Inc/stm32f7xx_hal_conf.h -HeaderFiles#2=/home/fdila/Projects/otto/test_dma/Core/Inc/main.h -HeaderFolderListSize=1 -HeaderPath#0=/home/fdila/Projects/otto/test_dma/Core/Inc -SourceFileListSize=3 -SourceFiles#0=/home/fdila/Projects/otto/test_dma/Core/Src/stm32f7xx_it.c -SourceFiles#1=/home/fdila/Projects/otto/test_dma/Core/Src/stm32f7xx_hal_msp.c -SourceFiles#2=/home/fdila/Projects/otto/test_dma/Core/Src/main.c -SourceFolderListSize=1 -SourcePath#0=/home/fdila/Projects/otto/test_dma/Core/Src - -[PreviousLibFiles] -LibFiles=Drivers/STM32F7xx_HAL_Driver/Inc/stm32f7xx_hal_cortex.h;Drivers/STM32F7xx_HAL_Driver/Inc/stm32f7xx_hal_tim.h;Drivers/STM32F7xx_HAL_Driver/Inc/stm32f7xx_hal_tim_ex.h;Drivers/STM32F7xx_HAL_Driver/Inc/stm32f7xx_hal_uart.h;Drivers/STM32F7xx_HAL_Driver/Inc/stm32f7xx_hal_uart_ex.h;Drivers/STM32F7xx_HAL_Driver/Inc/stm32f7xx_hal_rcc.h;Drivers/STM32F7xx_HAL_Driver/Inc/stm32f7xx_hal_rcc_ex.h;Drivers/STM32F7xx_HAL_Driver/Inc/stm32f7xx_hal_flash.h;Drivers/STM32F7xx_HAL_Driver/Inc/stm32f7xx_hal_flash_ex.h;Drivers/STM32F7xx_HAL_Driver/Inc/stm32f7xx_hal_gpio.h;Drivers/STM32F7xx_HAL_Driver/Inc/stm32f7xx_hal_gpio_ex.h;Drivers/STM32F7xx_HAL_Driver/Inc/stm32f7xx_hal_dma.h;Drivers/STM32F7xx_HAL_Driver/Inc/stm32f7xx_hal_dma_ex.h;Drivers/STM32F7xx_HAL_Driver/Inc/stm32f7xx_hal_pwr.h;Drivers/STM32F7xx_HAL_Driver/Inc/stm32f7xx_hal_pwr_ex.h;Drivers/STM32F7xx_HAL_Driver/Inc/stm32f7xx_hal.h;Drivers/STM32F7xx_HAL_Driver/Inc/stm32f7xx_hal_def.h;Drivers/STM32F7xx_HAL_Driver/Inc/Legacy/stm32_hal_legacy.h;Drivers/STM32F7xx_HAL_Driver/Inc/stm32f7xx_hal_i2c.h;Drivers/STM32F7xx_HAL_Driver/Inc/stm32f7xx_hal_i2c_ex.h;Drivers/STM32F7xx_HAL_Driver/Inc/stm32f7xx_hal_exti.h;Drivers/STM32F7xx_HAL_Driver/Src/stm32f7xx_hal_cortex.c;Drivers/STM32F7xx_HAL_Driver/Src/stm32f7xx_hal_tim.c;Drivers/STM32F7xx_HAL_Driver/Src/stm32f7xx_hal_tim_ex.c;Drivers/STM32F7xx_HAL_Driver/Src/stm32f7xx_hal_uart.c;Drivers/STM32F7xx_HAL_Driver/Src/stm32f7xx_hal_uart_ex.c;Drivers/STM32F7xx_HAL_Driver/Src/stm32f7xx_hal_rcc.c;Drivers/STM32F7xx_HAL_Driver/Src/stm32f7xx_hal_rcc_ex.c;Drivers/STM32F7xx_HAL_Driver/Src/stm32f7xx_hal_flash.c;Drivers/STM32F7xx_HAL_Driver/Src/stm32f7xx_hal_flash_ex.c;Drivers/STM32F7xx_HAL_Driver/Src/stm32f7xx_hal_gpio.c;Drivers/STM32F7xx_HAL_Driver/Src/stm32f7xx_hal_dma.c;Drivers/STM32F7xx_HAL_Driver/Src/stm32f7xx_hal_dma_ex.c;Drivers/STM32F7xx_HAL_Driver/Src/stm32f7xx_hal_pwr.c;Drivers/STM32F7xx_HAL_Driver/Src/stm32f7xx_hal_pwr_ex.c;Drivers/STM32F7xx_HAL_Driver/Src/stm32f7xx_hal.c;Drivers/STM32F7xx_HAL_Driver/Src/stm32f7xx_hal_i2c.c;Drivers/STM32F7xx_HAL_Driver/Src/stm32f7xx_hal_i2c_ex.c;Drivers/STM32F7xx_HAL_Driver/Src/stm32f7xx_hal_exti.c;Drivers/STM32F7xx_HAL_Driver/Inc/stm32f7xx_hal_cortex.h;Drivers/STM32F7xx_HAL_Driver/Inc/stm32f7xx_hal_tim.h;Drivers/STM32F7xx_HAL_Driver/Inc/stm32f7xx_hal_tim_ex.h;Drivers/STM32F7xx_HAL_Driver/Inc/stm32f7xx_hal_uart.h;Drivers/STM32F7xx_HAL_Driver/Inc/stm32f7xx_hal_uart_ex.h;Drivers/STM32F7xx_HAL_Driver/Inc/stm32f7xx_hal_rcc.h;Drivers/STM32F7xx_HAL_Driver/Inc/stm32f7xx_hal_rcc_ex.h;Drivers/STM32F7xx_HAL_Driver/Inc/stm32f7xx_hal_flash.h;Drivers/STM32F7xx_HAL_Driver/Inc/stm32f7xx_hal_flash_ex.h;Drivers/STM32F7xx_HAL_Driver/Inc/stm32f7xx_hal_gpio.h;Drivers/STM32F7xx_HAL_Driver/Inc/stm32f7xx_hal_gpio_ex.h;Drivers/STM32F7xx_HAL_Driver/Inc/stm32f7xx_hal_dma.h;Drivers/STM32F7xx_HAL_Driver/Inc/stm32f7xx_hal_dma_ex.h;Drivers/STM32F7xx_HAL_Driver/Inc/stm32f7xx_hal_pwr.h;Drivers/STM32F7xx_HAL_Driver/Inc/stm32f7xx_hal_pwr_ex.h;Drivers/STM32F7xx_HAL_Driver/Inc/stm32f7xx_hal.h;Drivers/STM32F7xx_HAL_Driver/Inc/stm32f7xx_hal_def.h;Drivers/STM32F7xx_HAL_Driver/Inc/Legacy/stm32_hal_legacy.h;Drivers/STM32F7xx_HAL_Driver/Inc/stm32f7xx_hal_i2c.h;Drivers/STM32F7xx_HAL_Driver/Inc/stm32f7xx_hal_i2c_ex.h;Drivers/STM32F7xx_HAL_Driver/Inc/stm32f7xx_hal_exti.h;Drivers/CMSIS/Device/ST/STM32F7xx/Include/stm32f767xx.h;Drivers/CMSIS/Device/ST/STM32F7xx/Include/stm32f7xx.h;Drivers/CMSIS/Device/ST/STM32F7xx/Include/system_stm32f7xx.h;Drivers/CMSIS/Device/ST/STM32F7xx/Source/Templates/system_stm32f7xx.c;Drivers/CMSIS/Include/cmsis_gcc.h;Drivers/CMSIS/Include/core_cm3.h;Drivers/CMSIS/Include/core_armv8mml.h;Drivers/CMSIS/Include/cmsis_armcc.h;Drivers/CMSIS/Include/core_sc300.h;Drivers/CMSIS/Include/core_cm33.h;Drivers/CMSIS/Include/core_cm0.h;Drivers/CMSIS/Include/core_cm1.h;Drivers/CMSIS/Include/tz_context.h;Drivers/CMSIS/Include/cmsis_armclang.h;Drivers/CMSIS/Include/core_cm7.h;Drivers/CMSIS/Include/cmsis_compiler.h;Drivers/CMSIS/Include/cmsis_iccarm.h;Drivers/CMSIS/Include/core_cm23.h;Drivers/CMSIS/Include/core_armv8mbl.h;Drivers/CMSIS/Include/core_cm0plus.h;Drivers/CMSIS/Include/mpu_armv7.h;Drivers/CMSIS/Include/mpu_armv8.h;Drivers/CMSIS/Include/cmsis_version.h;Drivers/CMSIS/Include/core_sc000.h;Drivers/CMSIS/Include/core_cm4.h; - -[PreviousUsedCubeIDEFiles] -SourceFiles=Core/Src/main.c;Core/Src/stm32f7xx_it.c;Core/Src/stm32f7xx_hal_msp.c;Drivers/STM32F7xx_HAL_Driver/Src/stm32f7xx_hal_cortex.c;Drivers/STM32F7xx_HAL_Driver/Src/stm32f7xx_hal_tim.c;Drivers/STM32F7xx_HAL_Driver/Src/stm32f7xx_hal_tim_ex.c;Drivers/STM32F7xx_HAL_Driver/Src/stm32f7xx_hal_uart.c;Drivers/STM32F7xx_HAL_Driver/Src/stm32f7xx_hal_uart_ex.c;Drivers/STM32F7xx_HAL_Driver/Src/stm32f7xx_hal_rcc.c;Drivers/STM32F7xx_HAL_Driver/Src/stm32f7xx_hal_rcc_ex.c;Drivers/STM32F7xx_HAL_Driver/Src/stm32f7xx_hal_flash.c;Drivers/STM32F7xx_HAL_Driver/Src/stm32f7xx_hal_flash_ex.c;Drivers/STM32F7xx_HAL_Driver/Src/stm32f7xx_hal_gpio.c;Drivers/STM32F7xx_HAL_Driver/Src/stm32f7xx_hal_dma.c;Drivers/STM32F7xx_HAL_Driver/Src/stm32f7xx_hal_dma_ex.c;Drivers/STM32F7xx_HAL_Driver/Src/stm32f7xx_hal_pwr.c;Drivers/STM32F7xx_HAL_Driver/Src/stm32f7xx_hal_pwr_ex.c;Drivers/STM32F7xx_HAL_Driver/Src/stm32f7xx_hal.c;Drivers/STM32F7xx_HAL_Driver/Src/stm32f7xx_hal_i2c.c;Drivers/STM32F7xx_HAL_Driver/Src/stm32f7xx_hal_i2c_ex.c;Drivers/STM32F7xx_HAL_Driver/Src/stm32f7xx_hal_exti.c;Core/Src/system_stm32f7xx.c;Drivers/STM32F7xx_HAL_Driver/Src/stm32f7xx_hal_cortex.c;Drivers/STM32F7xx_HAL_Driver/Src/stm32f7xx_hal_tim.c;Drivers/STM32F7xx_HAL_Driver/Src/stm32f7xx_hal_tim_ex.c;Drivers/STM32F7xx_HAL_Driver/Src/stm32f7xx_hal_uart.c;Drivers/STM32F7xx_HAL_Driver/Src/stm32f7xx_hal_uart_ex.c;Drivers/STM32F7xx_HAL_Driver/Src/stm32f7xx_hal_rcc.c;Drivers/STM32F7xx_HAL_Driver/Src/stm32f7xx_hal_rcc_ex.c;Drivers/STM32F7xx_HAL_Driver/Src/stm32f7xx_hal_flash.c;Drivers/STM32F7xx_HAL_Driver/Src/stm32f7xx_hal_flash_ex.c;Drivers/STM32F7xx_HAL_Driver/Src/stm32f7xx_hal_gpio.c;Drivers/STM32F7xx_HAL_Driver/Src/stm32f7xx_hal_dma.c;Drivers/STM32F7xx_HAL_Driver/Src/stm32f7xx_hal_dma_ex.c;Drivers/STM32F7xx_HAL_Driver/Src/stm32f7xx_hal_pwr.c;Drivers/STM32F7xx_HAL_Driver/Src/stm32f7xx_hal_pwr_ex.c;Drivers/STM32F7xx_HAL_Driver/Src/stm32f7xx_hal.c;Drivers/STM32F7xx_HAL_Driver/Src/stm32f7xx_hal_i2c.c;Drivers/STM32F7xx_HAL_Driver/Src/stm32f7xx_hal_i2c_ex.c;Drivers/STM32F7xx_HAL_Driver/Src/stm32f7xx_hal_exti.c;Core/Src/system_stm32f7xx.c;Drivers/CMSIS/Device/ST/STM32F7xx/Source/Templates/system_stm32f7xx.c;; -HeaderPath=Drivers/STM32F7xx_HAL_Driver/Inc;Drivers/STM32F7xx_HAL_Driver/Inc/Legacy;Drivers/CMSIS/Device/ST/STM32F7xx/Include;Drivers/CMSIS/Include;Core/Inc; -CDefines=USE_HAL_DRIVER;STM32F767xx;USE_HAL_DRIVER;USE_HAL_DRIVER; - diff --git a/test_dma/.project b/test_dma/.project deleted file mode 100644 index ad2d9ea..0000000 --- a/test_dma/.project +++ /dev/null @@ -1,33 +0,0 @@ - - - test_dma - - - - - - org.eclipse.cdt.managedbuilder.core.genmakebuilder - clean,full,incremental, - - - - - org.eclipse.cdt.managedbuilder.core.ScannerConfigBuilder - full,incremental, - - - - - - com.st.stm32cube.ide.mcu.MCUProjectNature - com.st.stm32cube.ide.mcu.MCUCubeProjectNature - org.eclipse.cdt.core.cnature - com.st.stm32cube.ide.mcu.MCUCubeIdeServicesRevAProjectNature - com.st.stm32cube.ide.mcu.MCUAdvancedStructureProjectNature - com.st.stm32cube.ide.mcu.MCUEndUserDisabledTrustZoneProjectNature - com.st.stm32cube.ide.mcu.MCUSingleCpuProjectNature - com.st.stm32cube.ide.mcu.MCURootProjectNature - org.eclipse.cdt.managedbuilder.core.managedBuildNature - org.eclipse.cdt.managedbuilder.core.ScannerConfigNature - - diff --git a/test_dma/.settings/language.settings.xml b/test_dma/.settings/language.settings.xml deleted file mode 100644 index 64ba81e..0000000 --- a/test_dma/.settings/language.settings.xml +++ /dev/null @@ -1,27 +0,0 @@ - - - - - - - - - - - - - - - - - - - - - - - - - - - diff --git a/test_dma/Core/Inc/main.h b/test_dma/Core/Inc/main.h deleted file mode 100644 index 17ee002..0000000 --- a/test_dma/Core/Inc/main.h +++ /dev/null @@ -1,71 +0,0 @@ -/* USER CODE BEGIN Header */ -/** - ****************************************************************************** - * @file : main.h - * @brief : Header for main.c file. - * This file contains the common defines of the application. - ****************************************************************************** - * @attention - * - *

© Copyright (c) 2020 STMicroelectronics. - * All rights reserved.

- * - * This software component is licensed by ST under BSD 3-Clause license, - * the "License"; You may not use this file except in compliance with the - * License. You may obtain a copy of the License at: - * opensource.org/licenses/BSD-3-Clause - * - ****************************************************************************** - */ -/* USER CODE END Header */ - -/* Define to prevent recursive inclusion -------------------------------------*/ -#ifndef __MAIN_H -#define __MAIN_H - -#ifdef __cplusplus -extern "C" { -#endif - -/* Includes ------------------------------------------------------------------*/ -#include "stm32f7xx_hal.h" - -/* Private includes ----------------------------------------------------------*/ -/* USER CODE BEGIN Includes */ - -/* USER CODE END Includes */ - -/* Exported types ------------------------------------------------------------*/ -/* USER CODE BEGIN ET */ - -/* USER CODE END ET */ - -/* Exported constants --------------------------------------------------------*/ -/* USER CODE BEGIN EC */ - -/* USER CODE END EC */ - -/* Exported macro ------------------------------------------------------------*/ -/* USER CODE BEGIN EM */ - -/* USER CODE END EM */ - -/* Exported functions prototypes ---------------------------------------------*/ -void Error_Handler(void); - -/* USER CODE BEGIN EFP */ - -/* USER CODE END EFP */ - -/* Private defines -----------------------------------------------------------*/ -/* USER CODE BEGIN Private defines */ - -/* USER CODE END Private defines */ - -#ifdef __cplusplus -} -#endif - -#endif /* __MAIN_H */ - -/************************ (C) COPYRIGHT STMicroelectronics *****END OF FILE****/ diff --git a/test_dma/Core/Inc/stm32f7xx_hal_conf.h b/test_dma/Core/Inc/stm32f7xx_hal_conf.h deleted file mode 100644 index 0da8dc5..0000000 --- a/test_dma/Core/Inc/stm32f7xx_hal_conf.h +++ /dev/null @@ -1,442 +0,0 @@ -/** - ****************************************************************************** - * @file stm32f7xx_hal_conf_template.h - * @author MCD Application Team - * @brief HAL configuration template file. - * This file should be copied to the application folder and renamed - * to stm32f7xx_hal_conf.h. - ****************************************************************************** - * @attention - * - *

© Copyright (c) 2017 STMicroelectronics. - * All rights reserved.

- * - * This software component is licensed by ST under BSD 3-Clause license, - * the "License"; You may not use this file except in compliance with the - * License. You may obtain a copy of the License at: - * opensource.org/licenses/BSD-3-Clause - * - ****************************************************************************** - */ - -/* Define to prevent recursive inclusion -------------------------------------*/ -#ifndef __STM32F7xx_HAL_CONF_H -#define __STM32F7xx_HAL_CONF_H - -#ifdef __cplusplus - extern "C" { -#endif - -/* Exported types ------------------------------------------------------------*/ -/* Exported constants --------------------------------------------------------*/ - -/* ########################## Module Selection ############################## */ -/** - * @brief This is the list of modules to be used in the HAL driver - */ -#define HAL_MODULE_ENABLED - - /* #define HAL_ADC_MODULE_ENABLED */ -/* #define HAL_CRYP_MODULE_ENABLED */ -/* #define HAL_CAN_MODULE_ENABLED */ -/* #define HAL_CEC_MODULE_ENABLED */ -/* #define HAL_CRC_MODULE_ENABLED */ -/* #define HAL_CRYP_MODULE_ENABLED */ -/* #define HAL_DAC_MODULE_ENABLED */ -/* #define HAL_DCMI_MODULE_ENABLED */ -/* #define HAL_DMA2D_MODULE_ENABLED */ -/* #define HAL_ETH_MODULE_ENABLED */ -/* #define HAL_NAND_MODULE_ENABLED */ -/* #define HAL_NOR_MODULE_ENABLED */ -/* #define HAL_SRAM_MODULE_ENABLED */ -/* #define HAL_SDRAM_MODULE_ENABLED */ -/* #define HAL_HASH_MODULE_ENABLED */ -/* #define HAL_I2S_MODULE_ENABLED */ -/* #define HAL_IWDG_MODULE_ENABLED */ -/* #define HAL_LPTIM_MODULE_ENABLED */ -/* #define HAL_LTDC_MODULE_ENABLED */ -/* #define HAL_QSPI_MODULE_ENABLED */ -/* #define HAL_RNG_MODULE_ENABLED */ -/* #define HAL_RTC_MODULE_ENABLED */ -/* #define HAL_SAI_MODULE_ENABLED */ -/* #define HAL_SD_MODULE_ENABLED */ -/* #define HAL_MMC_MODULE_ENABLED */ -/* #define HAL_SPDIFRX_MODULE_ENABLED */ -/* #define HAL_SPI_MODULE_ENABLED */ -/* #define HAL_TIM_MODULE_ENABLED */ -#define HAL_UART_MODULE_ENABLED -/* #define HAL_USART_MODULE_ENABLED */ -/* #define HAL_IRDA_MODULE_ENABLED */ -/* #define HAL_SMARTCARD_MODULE_ENABLED */ -/* #define HAL_WWDG_MODULE_ENABLED */ -/* #define HAL_PCD_MODULE_ENABLED */ -/* #define HAL_HCD_MODULE_ENABLED */ -/* #define HAL_DFSDM_MODULE_ENABLED */ -/* #define HAL_DSI_MODULE_ENABLED */ -/* #define HAL_JPEG_MODULE_ENABLED */ -/* #define HAL_MDIOS_MODULE_ENABLED */ -/* #define HAL_SMBUS_MODULE_ENABLED */ -/* #define HAL_EXTI_MODULE_ENABLED */ -#define HAL_GPIO_MODULE_ENABLED -#define HAL_EXTI_MODULE_ENABLED -#define HAL_DMA_MODULE_ENABLED -#define HAL_RCC_MODULE_ENABLED -#define HAL_FLASH_MODULE_ENABLED -#define HAL_PWR_MODULE_ENABLED -#define HAL_I2C_MODULE_ENABLED -#define HAL_CORTEX_MODULE_ENABLED - -/* ########################## HSE/HSI Values adaptation ##################### */ -/** - * @brief Adjust the value of External High Speed oscillator (HSE) used in your application. - * This value is used by the RCC HAL module to compute the system frequency - * (when HSE is used as system clock source, directly or through the PLL). - */ -#if !defined (HSE_VALUE) - #define HSE_VALUE ((uint32_t)25000000U) /*!< Value of the External oscillator in Hz */ -#endif /* HSE_VALUE */ - -#if !defined (HSE_STARTUP_TIMEOUT) - #define HSE_STARTUP_TIMEOUT ((uint32_t)100U) /*!< Time out for HSE start up, in ms */ -#endif /* HSE_STARTUP_TIMEOUT */ - -/** - * @brief Internal High Speed oscillator (HSI) value. - * This value is used by the RCC HAL module to compute the system frequency - * (when HSI is used as system clock source, directly or through the PLL). - */ -#if !defined (HSI_VALUE) - #define HSI_VALUE ((uint32_t)16000000U) /*!< Value of the Internal oscillator in Hz*/ -#endif /* HSI_VALUE */ - -/** - * @brief Internal Low Speed oscillator (LSI) value. - */ -#if !defined (LSI_VALUE) - #define LSI_VALUE ((uint32_t)32000U) /*!< LSI Typical Value in Hz*/ -#endif /* LSI_VALUE */ /*!< Value of the Internal Low Speed oscillator in Hz - The real value may vary depending on the variations - in voltage and temperature. */ -/** - * @brief External Low Speed oscillator (LSE) value. - */ -#if !defined (LSE_VALUE) - #define LSE_VALUE ((uint32_t)32768U) /*!< Value of the External Low Speed oscillator in Hz */ -#endif /* LSE_VALUE */ - -#if !defined (LSE_STARTUP_TIMEOUT) - #define LSE_STARTUP_TIMEOUT ((uint32_t)5000U) /*!< Time out for LSE start up, in ms */ -#endif /* LSE_STARTUP_TIMEOUT */ - -/** - * @brief External clock source for I2S peripheral - * This value is used by the I2S HAL module to compute the I2S clock source - * frequency, this source is inserted directly through I2S_CKIN pad. - */ -#if !defined (EXTERNAL_CLOCK_VALUE) - #define EXTERNAL_CLOCK_VALUE ((uint32_t)12288000U) /*!< Value of the Internal oscillator in Hz*/ -#endif /* EXTERNAL_CLOCK_VALUE */ - -/* Tip: To avoid modifying this file each time you need to use different HSE, - === you can define the HSE value in your toolchain compiler preprocessor. */ - -/* ########################### System Configuration ######################### */ -/** - * @brief This is the HAL system configuration section - */ -#define VDD_VALUE ((uint32_t)3300U) /*!< Value of VDD in mv */ -#define TICK_INT_PRIORITY ((uint32_t)0U) /*!< tick interrupt priority */ -#define USE_RTOS 0U -#define PREFETCH_ENABLE 0U -#define ART_ACCLERATOR_ENABLE 0U /* To enable instruction cache and prefetch */ - -/* ########################## Assert Selection ############################## */ -/** - * @brief Uncomment the line below to expanse the "assert_param" macro in the - * HAL drivers code - */ -/* #define USE_FULL_ASSERT 1U */ - -/* ################## Ethernet peripheral configuration ##################### */ - -/* Section 1 : Ethernet peripheral configuration */ - -/* MAC ADDRESS: MAC_ADDR0:MAC_ADDR1:MAC_ADDR2:MAC_ADDR3:MAC_ADDR4:MAC_ADDR5 */ -#define MAC_ADDR0 2U -#define MAC_ADDR1 0U -#define MAC_ADDR2 0U -#define MAC_ADDR3 0U -#define MAC_ADDR4 0U -#define MAC_ADDR5 0U - -/* Definition of the Ethernet driver buffers size and count */ -#define ETH_RX_BUF_SIZE ETH_MAX_PACKET_SIZE /* buffer size for receive */ -#define ETH_TX_BUF_SIZE ETH_MAX_PACKET_SIZE /* buffer size for transmit */ -#define ETH_RXBUFNB ((uint32_t)4U) /* 4 Rx buffers of size ETH_RX_BUF_SIZE */ -#define ETH_TXBUFNB ((uint32_t)4U) /* 4 Tx buffers of size ETH_TX_BUF_SIZE */ - -/* Section 2: PHY configuration section */ - -/* DP83848_PHY_ADDRESS Address*/ -#define DP83848_PHY_ADDRESS 0x01U -/* PHY Reset delay these values are based on a 1 ms Systick interrupt*/ -#define PHY_RESET_DELAY ((uint32_t)0x000000FFU) -/* PHY Configuration delay */ -#define PHY_CONFIG_DELAY ((uint32_t)0x00000FFFU) - -#define PHY_READ_TO ((uint32_t)0x0000FFFFU) -#define PHY_WRITE_TO ((uint32_t)0x0000FFFFU) - -/* Section 3: Common PHY Registers */ - -#define PHY_BCR ((uint16_t)0x0000U) /*!< Transceiver Basic Control Register */ -#define PHY_BSR ((uint16_t)0x0001U) /*!< Transceiver Basic Status Register */ - -#define PHY_RESET ((uint16_t)0x8000U) /*!< PHY Reset */ -#define PHY_LOOPBACK ((uint16_t)0x4000U) /*!< Select loop-back mode */ -#define PHY_FULLDUPLEX_100M ((uint16_t)0x2100U) /*!< Set the full-duplex mode at 100 Mb/s */ -#define PHY_HALFDUPLEX_100M ((uint16_t)0x2000U) /*!< Set the half-duplex mode at 100 Mb/s */ -#define PHY_FULLDUPLEX_10M ((uint16_t)0x0100U) /*!< Set the full-duplex mode at 10 Mb/s */ -#define PHY_HALFDUPLEX_10M ((uint16_t)0x0000U) /*!< Set the half-duplex mode at 10 Mb/s */ -#define PHY_AUTONEGOTIATION ((uint16_t)0x1000U) /*!< Enable auto-negotiation function */ -#define PHY_RESTART_AUTONEGOTIATION ((uint16_t)0x0200U) /*!< Restart auto-negotiation function */ -#define PHY_POWERDOWN ((uint16_t)0x0800U) /*!< Select the power down mode */ -#define PHY_ISOLATE ((uint16_t)0x0400U) /*!< Isolate PHY from MII */ - -#define PHY_AUTONEGO_COMPLETE ((uint16_t)0x0020U) /*!< Auto-Negotiation process completed */ -#define PHY_LINKED_STATUS ((uint16_t)0x0004U) /*!< Valid link established */ -#define PHY_JABBER_DETECTION ((uint16_t)0x0002U) /*!< Jabber condition detected */ - -/* Section 4: Extended PHY Registers */ -#define PHY_SR ((uint16_t)0x10U) /*!< PHY status register Offset */ - -#define PHY_SPEED_STATUS ((uint16_t)0x0002U) /*!< PHY Speed mask */ -#define PHY_DUPLEX_STATUS ((uint16_t)0x0004U) /*!< PHY Duplex mask */ - -/* ################## SPI peripheral configuration ########################## */ - -/* CRC FEATURE: Use to activate CRC feature inside HAL SPI Driver -* Activated: CRC code is present inside driver -* Deactivated: CRC code cleaned from driver -*/ - -#define USE_SPI_CRC 0U - -/* Includes ------------------------------------------------------------------*/ -/** - * @brief Include module's header file - */ - -#ifdef HAL_RCC_MODULE_ENABLED - #include "stm32f7xx_hal_rcc.h" -#endif /* HAL_RCC_MODULE_ENABLED */ - -#ifdef HAL_EXTI_MODULE_ENABLED - #include "stm32f7xx_hal_exti.h" -#endif /* HAL_EXTI_MODULE_ENABLED */ - -#ifdef HAL_GPIO_MODULE_ENABLED - #include "stm32f7xx_hal_gpio.h" -#endif /* HAL_GPIO_MODULE_ENABLED */ - -#ifdef HAL_DMA_MODULE_ENABLED - #include "stm32f7xx_hal_dma.h" -#endif /* HAL_DMA_MODULE_ENABLED */ - -#ifdef HAL_CORTEX_MODULE_ENABLED - #include "stm32f7xx_hal_cortex.h" -#endif /* HAL_CORTEX_MODULE_ENABLED */ - -#ifdef HAL_ADC_MODULE_ENABLED - #include "stm32f7xx_hal_adc.h" -#endif /* HAL_ADC_MODULE_ENABLED */ - -#ifdef HAL_CAN_MODULE_ENABLED - #include "stm32f7xx_hal_can.h" -#endif /* HAL_CAN_MODULE_ENABLED */ - -#ifdef HAL_CEC_MODULE_ENABLED - #include "stm32f7xx_hal_cec.h" -#endif /* HAL_CEC_MODULE_ENABLED */ - -#ifdef HAL_CRC_MODULE_ENABLED - #include "stm32f7xx_hal_crc.h" -#endif /* HAL_CRC_MODULE_ENABLED */ - -#ifdef HAL_CRYP_MODULE_ENABLED - #include "stm32f7xx_hal_cryp.h" -#endif /* HAL_CRYP_MODULE_ENABLED */ - -#ifdef HAL_DMA2D_MODULE_ENABLED - #include "stm32f7xx_hal_dma2d.h" -#endif /* HAL_DMA2D_MODULE_ENABLED */ - -#ifdef HAL_DAC_MODULE_ENABLED - #include "stm32f7xx_hal_dac.h" -#endif /* HAL_DAC_MODULE_ENABLED */ - -#ifdef HAL_DCMI_MODULE_ENABLED - #include "stm32f7xx_hal_dcmi.h" -#endif /* HAL_DCMI_MODULE_ENABLED */ - -#ifdef HAL_ETH_MODULE_ENABLED - #include "stm32f7xx_hal_eth.h" -#endif /* HAL_ETH_MODULE_ENABLED */ - -#ifdef HAL_FLASH_MODULE_ENABLED - #include "stm32f7xx_hal_flash.h" -#endif /* HAL_FLASH_MODULE_ENABLED */ - -#ifdef HAL_SRAM_MODULE_ENABLED - #include "stm32f7xx_hal_sram.h" -#endif /* HAL_SRAM_MODULE_ENABLED */ - -#ifdef HAL_NOR_MODULE_ENABLED - #include "stm32f7xx_hal_nor.h" -#endif /* HAL_NOR_MODULE_ENABLED */ - -#ifdef HAL_NAND_MODULE_ENABLED - #include "stm32f7xx_hal_nand.h" -#endif /* HAL_NAND_MODULE_ENABLED */ - -#ifdef HAL_SDRAM_MODULE_ENABLED - #include "stm32f7xx_hal_sdram.h" -#endif /* HAL_SDRAM_MODULE_ENABLED */ - -#ifdef HAL_HASH_MODULE_ENABLED - #include "stm32f7xx_hal_hash.h" -#endif /* HAL_HASH_MODULE_ENABLED */ - -#ifdef HAL_I2C_MODULE_ENABLED - #include "stm32f7xx_hal_i2c.h" -#endif /* HAL_I2C_MODULE_ENABLED */ - -#ifdef HAL_I2S_MODULE_ENABLED - #include "stm32f7xx_hal_i2s.h" -#endif /* HAL_I2S_MODULE_ENABLED */ - -#ifdef HAL_IWDG_MODULE_ENABLED - #include "stm32f7xx_hal_iwdg.h" -#endif /* HAL_IWDG_MODULE_ENABLED */ - -#ifdef HAL_LPTIM_MODULE_ENABLED - #include "stm32f7xx_hal_lptim.h" -#endif /* HAL_LPTIM_MODULE_ENABLED */ - -#ifdef HAL_LTDC_MODULE_ENABLED - #include "stm32f7xx_hal_ltdc.h" -#endif /* HAL_LTDC_MODULE_ENABLED */ - -#ifdef HAL_PWR_MODULE_ENABLED - #include "stm32f7xx_hal_pwr.h" -#endif /* HAL_PWR_MODULE_ENABLED */ - -#ifdef HAL_QSPI_MODULE_ENABLED - #include "stm32f7xx_hal_qspi.h" -#endif /* HAL_QSPI_MODULE_ENABLED */ - -#ifdef HAL_RNG_MODULE_ENABLED - #include "stm32f7xx_hal_rng.h" -#endif /* HAL_RNG_MODULE_ENABLED */ - -#ifdef HAL_RTC_MODULE_ENABLED - #include "stm32f7xx_hal_rtc.h" -#endif /* HAL_RTC_MODULE_ENABLED */ - -#ifdef HAL_SAI_MODULE_ENABLED - #include "stm32f7xx_hal_sai.h" -#endif /* HAL_SAI_MODULE_ENABLED */ - -#ifdef HAL_SD_MODULE_ENABLED - #include "stm32f7xx_hal_sd.h" -#endif /* HAL_SD_MODULE_ENABLED */ - -#ifdef HAL_MMC_MODULE_ENABLED - #include "stm32f7xx_hal_mmc.h" -#endif /* HAL_MMC_MODULE_ENABLED */ - -#ifdef HAL_SPDIFRX_MODULE_ENABLED - #include "stm32f7xx_hal_spdifrx.h" -#endif /* HAL_SPDIFRX_MODULE_ENABLED */ - -#ifdef HAL_SPI_MODULE_ENABLED - #include "stm32f7xx_hal_spi.h" -#endif /* HAL_SPI_MODULE_ENABLED */ - -#ifdef HAL_TIM_MODULE_ENABLED - #include "stm32f7xx_hal_tim.h" -#endif /* HAL_TIM_MODULE_ENABLED */ - -#ifdef HAL_UART_MODULE_ENABLED - #include "stm32f7xx_hal_uart.h" -#endif /* HAL_UART_MODULE_ENABLED */ - -#ifdef HAL_USART_MODULE_ENABLED - #include "stm32f7xx_hal_usart.h" -#endif /* HAL_USART_MODULE_ENABLED */ - -#ifdef HAL_IRDA_MODULE_ENABLED - #include "stm32f7xx_hal_irda.h" -#endif /* HAL_IRDA_MODULE_ENABLED */ - -#ifdef HAL_SMARTCARD_MODULE_ENABLED - #include "stm32f7xx_hal_smartcard.h" -#endif /* HAL_SMARTCARD_MODULE_ENABLED */ - -#ifdef HAL_WWDG_MODULE_ENABLED - #include "stm32f7xx_hal_wwdg.h" -#endif /* HAL_WWDG_MODULE_ENABLED */ - -#ifdef HAL_PCD_MODULE_ENABLED - #include "stm32f7xx_hal_pcd.h" -#endif /* HAL_PCD_MODULE_ENABLED */ - -#ifdef HAL_HCD_MODULE_ENABLED - #include "stm32f7xx_hal_hcd.h" -#endif /* HAL_HCD_MODULE_ENABLED */ - -#ifdef HAL_DFSDM_MODULE_ENABLED - #include "stm32f7xx_hal_dfsdm.h" -#endif /* HAL_DFSDM_MODULE_ENABLED */ - -#ifdef HAL_DSI_MODULE_ENABLED - #include "stm32f7xx_hal_dsi.h" -#endif /* HAL_DSI_MODULE_ENABLED */ - -#ifdef HAL_JPEG_MODULE_ENABLED - #include "stm32f7xx_hal_jpeg.h" -#endif /* HAL_JPEG_MODULE_ENABLED */ - -#ifdef HAL_MDIOS_MODULE_ENABLED - #include "stm32f7xx_hal_mdios.h" -#endif /* HAL_MDIOS_MODULE_ENABLED */ - -#ifdef HAL_SMBUS_MODULE_ENABLED - #include "stm32f7xx_hal_smbus.h" -#endif /* HAL_SMBUS_MODULE_ENABLED */ - -/* Exported macro ------------------------------------------------------------*/ -#ifdef USE_FULL_ASSERT -/** - * @brief The assert_param macro is used for function's parameters check. - * @param expr: If expr is false, it calls assert_failed function - * which reports the name of the source file and the source - * line number of the call that failed. - * If expr is true, it returns no value. - * @retval None - */ - #define assert_param(expr) ((expr) ? (void)0U : assert_failed((uint8_t *)__FILE__, __LINE__)) -/* Exported functions ------------------------------------------------------- */ - void assert_failed(uint8_t* file, uint32_t line); -#else - #define assert_param(expr) ((void)0U) -#endif /* USE_FULL_ASSERT */ - -#ifdef __cplusplus -} -#endif - -#endif /* __STM32F7xx_HAL_CONF_H */ - - -/************************ (C) COPYRIGHT STMicroelectronics *****END OF FILE****/ diff --git a/test_dma/Core/Inc/stm32f7xx_it.h b/test_dma/Core/Inc/stm32f7xx_it.h deleted file mode 100644 index 5a6ed7b..0000000 --- a/test_dma/Core/Inc/stm32f7xx_it.h +++ /dev/null @@ -1,73 +0,0 @@ -/* USER CODE BEGIN Header */ -/** - ****************************************************************************** - * @file stm32f7xx_it.h - * @brief This file contains the headers of the interrupt handlers. - ****************************************************************************** - * @attention - * - *

© Copyright (c) 2020 STMicroelectronics. - * All rights reserved.

- * - * This software component is licensed by ST under BSD 3-Clause license, - * the "License"; You may not use this file except in compliance with the - * License. You may obtain a copy of the License at: - * opensource.org/licenses/BSD-3-Clause - * - ****************************************************************************** - */ -/* USER CODE END Header */ - -/* Define to prevent recursive inclusion -------------------------------------*/ -#ifndef __STM32F7xx_IT_H -#define __STM32F7xx_IT_H - -#ifdef __cplusplus - extern "C" { -#endif - -/* Private includes ----------------------------------------------------------*/ -/* USER CODE BEGIN Includes */ - -/* USER CODE END Includes */ - -/* Exported types ------------------------------------------------------------*/ -/* USER CODE BEGIN ET */ - -/* USER CODE END ET */ - -/* Exported constants --------------------------------------------------------*/ -/* USER CODE BEGIN EC */ - -/* USER CODE END EC */ - -/* Exported macro ------------------------------------------------------------*/ -/* USER CODE BEGIN EM */ - -/* USER CODE END EM */ - -/* Exported functions prototypes ---------------------------------------------*/ -void NMI_Handler(void); -void HardFault_Handler(void); -void MemManage_Handler(void); -void BusFault_Handler(void); -void UsageFault_Handler(void); -void SVC_Handler(void); -void DebugMon_Handler(void); -void PendSV_Handler(void); -void SysTick_Handler(void); -void EXTI15_10_IRQHandler(void); -void DMA2_Stream1_IRQHandler(void); -void DMA2_Stream6_IRQHandler(void); -void USART6_IRQHandler(void); -/* USER CODE BEGIN EFP */ - -/* USER CODE END EFP */ - -#ifdef __cplusplus -} -#endif - -#endif /* __STM32F7xx_IT_H */ - -/************************ (C) COPYRIGHT STMicroelectronics *****END OF FILE****/ diff --git a/test_dma/Core/Src/main.c b/test_dma/Core/Src/main.c deleted file mode 100644 index 7b20a1b..0000000 --- a/test_dma/Core/Src/main.c +++ /dev/null @@ -1,289 +0,0 @@ -/* USER CODE BEGIN Header */ -/** - ****************************************************************************** - * @file : main.c - * @brief : Main program body - ****************************************************************************** - * @attention - * - *

© Copyright (c) 2020 STMicroelectronics. - * All rights reserved.

- * - * This software component is licensed by ST under BSD 3-Clause license, - * the "License"; You may not use this file except in compliance with the - * License. You may obtain a copy of the License at: - * opensource.org/licenses/BSD-3-Clause - * - ****************************************************************************** - */ -/* USER CODE END Header */ - -/* Includes ------------------------------------------------------------------*/ -#include "main.h" - -/* Private includes ----------------------------------------------------------*/ -/* USER CODE BEGIN Includes */ - -/* USER CODE END Includes */ - -/* Private typedef -----------------------------------------------------------*/ -/* USER CODE BEGIN PTD */ - -/* USER CODE END PTD */ - -/* Private define ------------------------------------------------------------*/ -/* USER CODE BEGIN PD */ -/* USER CODE END PD */ - -/* Private macro -------------------------------------------------------------*/ -/* USER CODE BEGIN PM */ - -/* USER CODE END PM */ - -/* Private variables ---------------------------------------------------------*/ - -UART_HandleTypeDef huart6; -DMA_HandleTypeDef hdma_usart6_rx; -DMA_HandleTypeDef hdma_usart6_tx; - -/* USER CODE BEGIN PV */ -int mode = 0; -uint8_t *rx_buffer; -float test[2]; - -/* USER CODE END PV */ - -/* Private function prototypes -----------------------------------------------*/ -void SystemClock_Config(void); -static void MX_GPIO_Init(void); -static void MX_DMA_Init(void); -static void MX_USART6_UART_Init(void); -/* USER CODE BEGIN PFP */ - -/* USER CODE END PFP */ - -/* Private user code ---------------------------------------------------------*/ -/* USER CODE BEGIN 0 */ - -/* USER CODE END 0 */ - -/** - * @brief The application entry point. - * @retval int - */ -int main(void) -{ - /* USER CODE BEGIN 1 */ - - /* USER CODE END 1 */ - - - /* MCU Configuration--------------------------------------------------------*/ - - /* Reset of all peripherals, Initializes the Flash interface and the Systick. */ - HAL_Init(); - - /* USER CODE BEGIN Init */ - - /* USER CODE END Init */ - - /* Configure the system clock */ - SystemClock_Config(); - - /* USER CODE BEGIN SysInit */ - - /* USER CODE END SysInit */ - - /* Initialize all configured peripherals */ - MX_GPIO_Init(); - MX_DMA_Init(); - MX_USART6_UART_Init(); - /* USER CODE BEGIN 2 */ - rx_buffer = (uint8_t*) &test; - test[0] = 1.2; - test[1] = 3.4; - HAL_UART_Receive_DMA(&huart6, rx_buffer, 8); - - /* USER CODE END 2 */ - - - - /* Infinite loop */ - /* USER CODE BEGIN WHILE */ - while (1) - { - /* USER CODE END WHILE */ - - /* USER CODE BEGIN 3 */ - } - /* USER CODE END 3 */ -} - -/** - * @brief System Clock Configuration - * @retval None - */ -void SystemClock_Config(void) -{ - RCC_OscInitTypeDef RCC_OscInitStruct = {0}; - RCC_ClkInitTypeDef RCC_ClkInitStruct = {0}; - RCC_PeriphCLKInitTypeDef PeriphClkInitStruct = {0}; - - /** Configure the main internal regulator output voltage - */ - __HAL_RCC_PWR_CLK_ENABLE(); - __HAL_PWR_VOLTAGESCALING_CONFIG(PWR_REGULATOR_VOLTAGE_SCALE3); - /** Initializes the CPU, AHB and APB busses clocks - */ - RCC_OscInitStruct.OscillatorType = RCC_OSCILLATORTYPE_HSI; - RCC_OscInitStruct.HSIState = RCC_HSI_ON; - RCC_OscInitStruct.HSICalibrationValue = RCC_HSICALIBRATION_DEFAULT; - RCC_OscInitStruct.PLL.PLLState = RCC_PLL_NONE; - if (HAL_RCC_OscConfig(&RCC_OscInitStruct) != HAL_OK) - { - Error_Handler(); - } - /** Initializes the CPU, AHB and APB busses clocks - */ - RCC_ClkInitStruct.ClockType = RCC_CLOCKTYPE_HCLK|RCC_CLOCKTYPE_SYSCLK - |RCC_CLOCKTYPE_PCLK1|RCC_CLOCKTYPE_PCLK2; - RCC_ClkInitStruct.SYSCLKSource = RCC_SYSCLKSOURCE_HSI; - RCC_ClkInitStruct.AHBCLKDivider = RCC_SYSCLK_DIV1; - RCC_ClkInitStruct.APB1CLKDivider = RCC_HCLK_DIV1; - RCC_ClkInitStruct.APB2CLKDivider = RCC_HCLK_DIV1; - - if (HAL_RCC_ClockConfig(&RCC_ClkInitStruct, FLASH_LATENCY_0) != HAL_OK) - { - Error_Handler(); - } - PeriphClkInitStruct.PeriphClockSelection = RCC_PERIPHCLK_USART6; - PeriphClkInitStruct.Usart6ClockSelection = RCC_USART6CLKSOURCE_PCLK2; - if (HAL_RCCEx_PeriphCLKConfig(&PeriphClkInitStruct) != HAL_OK) - { - Error_Handler(); - } -} - -/** - * @brief USART6 Initialization Function - * @param None - * @retval None - */ -static void MX_USART6_UART_Init(void) -{ - - /* USER CODE BEGIN USART6_Init 0 */ - - /* USER CODE END USART6_Init 0 */ - - /* USER CODE BEGIN USART6_Init 1 */ - - /* USER CODE END USART6_Init 1 */ - huart6.Instance = USART6; - huart6.Init.BaudRate = 115200; - huart6.Init.WordLength = UART_WORDLENGTH_8B; - huart6.Init.StopBits = UART_STOPBITS_1; - huart6.Init.Parity = UART_PARITY_NONE; - huart6.Init.Mode = UART_MODE_TX_RX; - huart6.Init.HwFlowCtl = UART_HWCONTROL_NONE; - huart6.Init.OverSampling = UART_OVERSAMPLING_16; - huart6.Init.OneBitSampling = UART_ONE_BIT_SAMPLE_DISABLE; - huart6.AdvancedInit.AdvFeatureInit = UART_ADVFEATURE_NO_INIT; - if (HAL_UART_Init(&huart6) != HAL_OK) - { - Error_Handler(); - } - /* USER CODE BEGIN USART6_Init 2 */ - - /* USER CODE END USART6_Init 2 */ - -} - -/** - * Enable DMA controller clock - */ -static void MX_DMA_Init(void) -{ - - /* DMA controller clock enable */ - __HAL_RCC_DMA2_CLK_ENABLE(); - - /* DMA interrupt init */ - /* DMA2_Stream1_IRQn interrupt configuration */ - HAL_NVIC_SetPriority(DMA2_Stream1_IRQn, 0, 0); - HAL_NVIC_EnableIRQ(DMA2_Stream1_IRQn); - /* DMA2_Stream6_IRQn interrupt configuration */ - HAL_NVIC_SetPriority(DMA2_Stream6_IRQn, 0, 0); - HAL_NVIC_EnableIRQ(DMA2_Stream6_IRQn); - -} - -/** - * @brief GPIO Initialization Function - * @param None - * @retval None - */ -static void MX_GPIO_Init(void) -{ - GPIO_InitTypeDef GPIO_InitStruct = {0}; - - /* GPIO Ports Clock Enable */ - __HAL_RCC_GPIOC_CLK_ENABLE(); - - /*Configure GPIO pin : PC13 */ - GPIO_InitStruct.Pin = GPIO_PIN_13; - GPIO_InitStruct.Mode = GPIO_MODE_IT_RISING; - GPIO_InitStruct.Pull = GPIO_NOPULL; - HAL_GPIO_Init(GPIOC, &GPIO_InitStruct); - - /* EXTI interrupt init*/ - HAL_NVIC_SetPriority(EXTI15_10_IRQn, 0, 0); - HAL_NVIC_EnableIRQ(EXTI15_10_IRQn); - -} - -/* USER CODE BEGIN 4 */ -void HAL_GPIO_EXTI_Callback(uint16_t GPIO_Pin) { - //Blue user button on the NUCLEO board - if (GPIO_Pin == GPIO_PIN_13) { - mode++; - - } -} -void HAL_UART_RxCpltCallback(UART_HandleTypeDef *UartHandle) { - HAL_UART_Receive_DMA(&huart6, rx_buffer, 8); - mode++; -} - -/* USER CODE END 4 */ - -/** - * @brief This function is executed in case of error occurrence. - * @retval None - */ -void Error_Handler(void) -{ - /* USER CODE BEGIN Error_Handler_Debug */ - /* User can add his own implementation to report the HAL error return state */ - - /* USER CODE END Error_Handler_Debug */ -} - -#ifdef USE_FULL_ASSERT -/** - * @brief Reports the name of the source file and the source line number - * where the assert_param error has occurred. - * @param file: pointer to the source file name - * @param line: assert_param error line source number - * @retval None - */ -void assert_failed(uint8_t *file, uint32_t line) -{ - /* USER CODE BEGIN 6 */ - /* User can add his own implementation to report the file name and line number, - tex: printf("Wrong parameters value: file %s on line %d\r\n", file, line) */ - /* USER CODE END 6 */ -} -#endif /* USE_FULL_ASSERT */ - -/************************ (C) COPYRIGHT STMicroelectronics *****END OF FILE****/ diff --git a/test_dma/Core/Src/stm32f7xx_hal_msp.c b/test_dma/Core/Src/stm32f7xx_hal_msp.c deleted file mode 100644 index c243ab5..0000000 --- a/test_dma/Core/Src/stm32f7xx_hal_msp.c +++ /dev/null @@ -1,198 +0,0 @@ -/* USER CODE BEGIN Header */ -/** - ****************************************************************************** - * File Name : stm32f7xx_hal_msp.c - * Description : This file provides code for the MSP Initialization - * and de-Initialization codes. - ****************************************************************************** - * @attention - * - *

© Copyright (c) 2020 STMicroelectronics. - * All rights reserved.

- * - * This software component is licensed by ST under BSD 3-Clause license, - * the "License"; You may not use this file except in compliance with the - * License. You may obtain a copy of the License at: - * opensource.org/licenses/BSD-3-Clause - * - ****************************************************************************** - */ -/* USER CODE END Header */ - -/* Includes ------------------------------------------------------------------*/ -#include "main.h" -/* USER CODE BEGIN Includes */ - -/* USER CODE END Includes */ -extern DMA_HandleTypeDef hdma_usart6_rx; - -extern DMA_HandleTypeDef hdma_usart6_tx; - -/* Private typedef -----------------------------------------------------------*/ -/* USER CODE BEGIN TD */ - -/* USER CODE END TD */ - -/* Private define ------------------------------------------------------------*/ -/* USER CODE BEGIN Define */ - -/* USER CODE END Define */ - -/* Private macro -------------------------------------------------------------*/ -/* USER CODE BEGIN Macro */ - -/* USER CODE END Macro */ - -/* Private variables ---------------------------------------------------------*/ -/* USER CODE BEGIN PV */ - -/* USER CODE END PV */ - -/* Private function prototypes -----------------------------------------------*/ -/* USER CODE BEGIN PFP */ - -/* USER CODE END PFP */ - -/* External functions --------------------------------------------------------*/ -/* USER CODE BEGIN ExternalFunctions */ - -/* USER CODE END ExternalFunctions */ - -/* USER CODE BEGIN 0 */ - -/* USER CODE END 0 */ -/** - * Initializes the Global MSP. - */ -void HAL_MspInit(void) -{ - /* USER CODE BEGIN MspInit 0 */ - - /* USER CODE END MspInit 0 */ - - __HAL_RCC_PWR_CLK_ENABLE(); - __HAL_RCC_SYSCFG_CLK_ENABLE(); - - /* System interrupt init*/ - - /* USER CODE BEGIN MspInit 1 */ - - /* USER CODE END MspInit 1 */ -} - -/** -* @brief UART MSP Initialization -* This function configures the hardware resources used in this example -* @param huart: UART handle pointer -* @retval None -*/ -void HAL_UART_MspInit(UART_HandleTypeDef* huart) -{ - GPIO_InitTypeDef GPIO_InitStruct = {0}; - if(huart->Instance==USART6) - { - /* USER CODE BEGIN USART6_MspInit 0 */ - - /* USER CODE END USART6_MspInit 0 */ - /* Peripheral clock enable */ - __HAL_RCC_USART6_CLK_ENABLE(); - - __HAL_RCC_GPIOC_CLK_ENABLE(); - /**USART6 GPIO Configuration - PC6 ------> USART6_TX - PC7 ------> USART6_RX - */ - GPIO_InitStruct.Pin = GPIO_PIN_6|GPIO_PIN_7; - GPIO_InitStruct.Mode = GPIO_MODE_AF_PP; - GPIO_InitStruct.Pull = GPIO_NOPULL; - GPIO_InitStruct.Speed = GPIO_SPEED_FREQ_VERY_HIGH; - GPIO_InitStruct.Alternate = GPIO_AF8_USART6; - HAL_GPIO_Init(GPIOC, &GPIO_InitStruct); - - /* USART6 DMA Init */ - /* USART6_RX Init */ - hdma_usart6_rx.Instance = DMA2_Stream1; - hdma_usart6_rx.Init.Channel = DMA_CHANNEL_5; - hdma_usart6_rx.Init.Direction = DMA_PERIPH_TO_MEMORY; - hdma_usart6_rx.Init.PeriphInc = DMA_PINC_DISABLE; - hdma_usart6_rx.Init.MemInc = DMA_MINC_ENABLE; - hdma_usart6_rx.Init.PeriphDataAlignment = DMA_PDATAALIGN_BYTE; - hdma_usart6_rx.Init.MemDataAlignment = DMA_MDATAALIGN_BYTE; - hdma_usart6_rx.Init.Mode = DMA_NORMAL; - hdma_usart6_rx.Init.Priority = DMA_PRIORITY_VERY_HIGH; - hdma_usart6_rx.Init.FIFOMode = DMA_FIFOMODE_DISABLE; - if (HAL_DMA_Init(&hdma_usart6_rx) != HAL_OK) - { - Error_Handler(); - } - - __HAL_LINKDMA(huart,hdmarx,hdma_usart6_rx); - - /* USART6_TX Init */ - hdma_usart6_tx.Instance = DMA2_Stream6; - hdma_usart6_tx.Init.Channel = DMA_CHANNEL_5; - hdma_usart6_tx.Init.Direction = DMA_MEMORY_TO_PERIPH; - hdma_usart6_tx.Init.PeriphInc = DMA_PINC_DISABLE; - hdma_usart6_tx.Init.MemInc = DMA_MINC_ENABLE; - hdma_usart6_tx.Init.PeriphDataAlignment = DMA_PDATAALIGN_BYTE; - hdma_usart6_tx.Init.MemDataAlignment = DMA_MDATAALIGN_BYTE; - hdma_usart6_tx.Init.Mode = DMA_NORMAL; - hdma_usart6_tx.Init.Priority = DMA_PRIORITY_VERY_HIGH; - hdma_usart6_tx.Init.FIFOMode = DMA_FIFOMODE_DISABLE; - if (HAL_DMA_Init(&hdma_usart6_tx) != HAL_OK) - { - Error_Handler(); - } - - __HAL_LINKDMA(huart,hdmatx,hdma_usart6_tx); - - /* USART6 interrupt Init */ - HAL_NVIC_SetPriority(USART6_IRQn, 0, 0); - HAL_NVIC_EnableIRQ(USART6_IRQn); - /* USER CODE BEGIN USART6_MspInit 1 */ - - /* USER CODE END USART6_MspInit 1 */ - } - -} - -/** -* @brief UART MSP De-Initialization -* This function freeze the hardware resources used in this example -* @param huart: UART handle pointer -* @retval None -*/ -void HAL_UART_MspDeInit(UART_HandleTypeDef* huart) -{ - if(huart->Instance==USART6) - { - /* USER CODE BEGIN USART6_MspDeInit 0 */ - - /* USER CODE END USART6_MspDeInit 0 */ - /* Peripheral clock disable */ - __HAL_RCC_USART6_CLK_DISABLE(); - - /**USART6 GPIO Configuration - PC6 ------> USART6_TX - PC7 ------> USART6_RX - */ - HAL_GPIO_DeInit(GPIOC, GPIO_PIN_6|GPIO_PIN_7); - - /* USART6 DMA DeInit */ - HAL_DMA_DeInit(huart->hdmarx); - HAL_DMA_DeInit(huart->hdmatx); - - /* USART6 interrupt DeInit */ - HAL_NVIC_DisableIRQ(USART6_IRQn); - /* USER CODE BEGIN USART6_MspDeInit 1 */ - - /* USER CODE END USART6_MspDeInit 1 */ - } - -} - -/* USER CODE BEGIN 1 */ - -/* USER CODE END 1 */ - -/************************ (C) COPYRIGHT STMicroelectronics *****END OF FILE****/ diff --git a/test_dma/Core/Src/stm32f7xx_it.c b/test_dma/Core/Src/stm32f7xx_it.c deleted file mode 100644 index 5cbe5f9..0000000 --- a/test_dma/Core/Src/stm32f7xx_it.c +++ /dev/null @@ -1,261 +0,0 @@ -/* USER CODE BEGIN Header */ -/** - ****************************************************************************** - * @file stm32f7xx_it.c - * @brief Interrupt Service Routines. - ****************************************************************************** - * @attention - * - *

© Copyright (c) 2020 STMicroelectronics. - * All rights reserved.

- * - * This software component is licensed by ST under BSD 3-Clause license, - * the "License"; You may not use this file except in compliance with the - * License. You may obtain a copy of the License at: - * opensource.org/licenses/BSD-3-Clause - * - ****************************************************************************** - */ -/* USER CODE END Header */ - -/* Includes ------------------------------------------------------------------*/ -#include "main.h" -#include "stm32f7xx_it.h" -/* Private includes ----------------------------------------------------------*/ -/* USER CODE BEGIN Includes */ -/* USER CODE END Includes */ - -/* Private typedef -----------------------------------------------------------*/ -/* USER CODE BEGIN TD */ - -/* USER CODE END TD */ - -/* Private define ------------------------------------------------------------*/ -/* USER CODE BEGIN PD */ - -/* USER CODE END PD */ - -/* Private macro -------------------------------------------------------------*/ -/* USER CODE BEGIN PM */ - -/* USER CODE END PM */ - -/* Private variables ---------------------------------------------------------*/ -/* USER CODE BEGIN PV */ - -/* USER CODE END PV */ - -/* Private function prototypes -----------------------------------------------*/ -/* USER CODE BEGIN PFP */ - -/* USER CODE END PFP */ - -/* Private user code ---------------------------------------------------------*/ -/* USER CODE BEGIN 0 */ - -/* USER CODE END 0 */ - -/* External variables --------------------------------------------------------*/ -extern DMA_HandleTypeDef hdma_usart6_rx; -extern DMA_HandleTypeDef hdma_usart6_tx; -extern UART_HandleTypeDef huart6; -/* USER CODE BEGIN EV */ - -/* USER CODE END EV */ - -/******************************************************************************/ -/* Cortex-M7 Processor Interruption and Exception Handlers */ -/******************************************************************************/ -/** - * @brief This function handles Non maskable interrupt. - */ -void NMI_Handler(void) -{ - /* USER CODE BEGIN NonMaskableInt_IRQn 0 */ - - /* USER CODE END NonMaskableInt_IRQn 0 */ - /* USER CODE BEGIN NonMaskableInt_IRQn 1 */ - - /* USER CODE END NonMaskableInt_IRQn 1 */ -} - -/** - * @brief This function handles Hard fault interrupt. - */ -void HardFault_Handler(void) -{ - /* USER CODE BEGIN HardFault_IRQn 0 */ - - /* USER CODE END HardFault_IRQn 0 */ - while (1) - { - /* USER CODE BEGIN W1_HardFault_IRQn 0 */ - /* USER CODE END W1_HardFault_IRQn 0 */ - } -} - -/** - * @brief This function handles Memory management fault. - */ -void MemManage_Handler(void) -{ - /* USER CODE BEGIN MemoryManagement_IRQn 0 */ - - /* USER CODE END MemoryManagement_IRQn 0 */ - while (1) - { - /* USER CODE BEGIN W1_MemoryManagement_IRQn 0 */ - /* USER CODE END W1_MemoryManagement_IRQn 0 */ - } -} - -/** - * @brief This function handles Pre-fetch fault, memory access fault. - */ -void BusFault_Handler(void) -{ - /* USER CODE BEGIN BusFault_IRQn 0 */ - - /* USER CODE END BusFault_IRQn 0 */ - while (1) - { - /* USER CODE BEGIN W1_BusFault_IRQn 0 */ - /* USER CODE END W1_BusFault_IRQn 0 */ - } -} - -/** - * @brief This function handles Undefined instruction or illegal state. - */ -void UsageFault_Handler(void) -{ - /* USER CODE BEGIN UsageFault_IRQn 0 */ - - /* USER CODE END UsageFault_IRQn 0 */ - while (1) - { - /* USER CODE BEGIN W1_UsageFault_IRQn 0 */ - /* USER CODE END W1_UsageFault_IRQn 0 */ - } -} - -/** - * @brief This function handles System service call via SWI instruction. - */ -void SVC_Handler(void) -{ - /* USER CODE BEGIN SVCall_IRQn 0 */ - - /* USER CODE END SVCall_IRQn 0 */ - /* USER CODE BEGIN SVCall_IRQn 1 */ - - /* USER CODE END SVCall_IRQn 1 */ -} - -/** - * @brief This function handles Debug monitor. - */ -void DebugMon_Handler(void) -{ - /* USER CODE BEGIN DebugMonitor_IRQn 0 */ - - /* USER CODE END DebugMonitor_IRQn 0 */ - /* USER CODE BEGIN DebugMonitor_IRQn 1 */ - - /* USER CODE END DebugMonitor_IRQn 1 */ -} - -/** - * @brief This function handles Pendable request for system service. - */ -void PendSV_Handler(void) -{ - /* USER CODE BEGIN PendSV_IRQn 0 */ - - /* USER CODE END PendSV_IRQn 0 */ - /* USER CODE BEGIN PendSV_IRQn 1 */ - - /* USER CODE END PendSV_IRQn 1 */ -} - -/** - * @brief This function handles System tick timer. - */ -void SysTick_Handler(void) -{ - /* USER CODE BEGIN SysTick_IRQn 0 */ - - /* USER CODE END SysTick_IRQn 0 */ - HAL_IncTick(); - /* USER CODE BEGIN SysTick_IRQn 1 */ - - /* USER CODE END SysTick_IRQn 1 */ -} - -/******************************************************************************/ -/* STM32F7xx Peripheral Interrupt Handlers */ -/* Add here the Interrupt Handlers for the used peripherals. */ -/* For the available peripheral interrupt handler names, */ -/* please refer to the startup file (startup_stm32f7xx.s). */ -/******************************************************************************/ - -/** - * @brief This function handles EXTI line[15:10] interrupts. - */ -void EXTI15_10_IRQHandler(void) -{ - /* USER CODE BEGIN EXTI15_10_IRQn 0 */ - - /* USER CODE END EXTI15_10_IRQn 0 */ - HAL_GPIO_EXTI_IRQHandler(GPIO_PIN_13); - /* USER CODE BEGIN EXTI15_10_IRQn 1 */ - - /* USER CODE END EXTI15_10_IRQn 1 */ -} - -/** - * @brief This function handles DMA2 stream1 global interrupt. - */ -void DMA2_Stream1_IRQHandler(void) -{ - /* USER CODE BEGIN DMA2_Stream1_IRQn 0 */ - - /* USER CODE END DMA2_Stream1_IRQn 0 */ - HAL_DMA_IRQHandler(&hdma_usart6_rx); - /* USER CODE BEGIN DMA2_Stream1_IRQn 1 */ - - /* USER CODE END DMA2_Stream1_IRQn 1 */ -} - -/** - * @brief This function handles DMA2 stream6 global interrupt. - */ -void DMA2_Stream6_IRQHandler(void) -{ - /* USER CODE BEGIN DMA2_Stream6_IRQn 0 */ - - /* USER CODE END DMA2_Stream6_IRQn 0 */ - HAL_DMA_IRQHandler(&hdma_usart6_tx); - /* USER CODE BEGIN DMA2_Stream6_IRQn 1 */ - - /* USER CODE END DMA2_Stream6_IRQn 1 */ -} - -/** - * @brief This function handles USART6 global interrupt. - */ -void USART6_IRQHandler(void) -{ - /* USER CODE BEGIN USART6_IRQn 0 */ - - /* USER CODE END USART6_IRQn 0 */ - HAL_UART_IRQHandler(&huart6); - /* USER CODE BEGIN USART6_IRQn 1 */ - - /* USER CODE END USART6_IRQn 1 */ -} - -/* USER CODE BEGIN 1 */ - -/* USER CODE END 1 */ -/************************ (C) COPYRIGHT STMicroelectronics *****END OF FILE****/ diff --git a/test_dma/Core/Src/syscalls.c b/test_dma/Core/Src/syscalls.c deleted file mode 100644 index 9f32dad..0000000 --- a/test_dma/Core/Src/syscalls.c +++ /dev/null @@ -1,184 +0,0 @@ -/** -***************************************************************************** -** -** File : syscalls.c -** -** Author : Auto-generated by STM32CubeIDE -** -** Abstract : STM32CubeIDE Minimal System calls file -** -** For more information about which c-functions -** need which of these lowlevel functions -** please consult the Newlib libc-manual -** -** Environment : STM32CubeIDE MCU -** -** Distribution: The file is distributed as is, without any warranty -** of any kind. -** -***************************************************************************** -** -**

© COPYRIGHT(c) 2018 STMicroelectronics

-** -** Redistribution and use in source and binary forms, with or without modification, -** are permitted provided that the following conditions are met: -** 1. Redistributions of source code must retain the above copyright notice, -** this list of conditions and the following disclaimer. -** 2. Redistributions in binary form must reproduce the above copyright notice, -** this list of conditions and the following disclaimer in the documentation -** and/or other materials provided with the distribution. -** 3. Neither the name of STMicroelectronics nor the names of its contributors -** may be used to endorse or promote products derived from this software -** without specific prior written permission. -** -** THIS SOFTWARE IS PROVIDED BY THE COPYRIGHT HOLDERS AND CONTRIBUTORS "AS IS" -** AND ANY EXPRESS OR IMPLIED WARRANTIES, INCLUDING, BUT NOT LIMITED TO, THE -** IMPLIED WARRANTIES OF MERCHANTABILITY AND FITNESS FOR A PARTICULAR PURPOSE ARE -** DISCLAIMED. IN NO EVENT SHALL THE COPYRIGHT HOLDER OR CONTRIBUTORS BE LIABLE -** FOR ANY DIRECT, INDIRECT, INCIDENTAL, SPECIAL, EXEMPLARY, OR CONSEQUENTIAL -** DAMAGES (INCLUDING, BUT NOT LIMITED TO, PROCUREMENT OF SUBSTITUTE GOODS OR -** SERVICES; LOSS OF USE, DATA, OR PROFITS; OR BUSINESS INTERRUPTION) HOWEVER -** CAUSED AND ON ANY THEORY OF LIABILITY, WHETHER IN CONTRACT, STRICT LIABILITY, -** OR TORT (INCLUDING NEGLIGENCE OR OTHERWISE) ARISING IN ANY WAY OUT OF THE USE -** OF THIS SOFTWARE, EVEN IF ADVISED OF THE POSSIBILITY OF SUCH DAMAGE. -** -** -***************************************************************************** -*/ - -/* Includes */ -#include -#include -#include -#include -#include -#include -#include -#include - - -/* Variables */ -//#undef errno -extern int errno; -extern int __io_putchar(int ch) __attribute__((weak)); -extern int __io_getchar(void) __attribute__((weak)); - -register char * stack_ptr asm("sp"); - -char *__env[1] = { 0 }; -char **environ = __env; - - -/* Functions */ -void initialise_monitor_handles() -{ -} - -int _getpid(void) -{ - return 1; -} - -int _kill(int pid, int sig) -{ - errno = EINVAL; - return -1; -} - -void _exit (int status) -{ - _kill(status, -1); - while (1) {} /* Make sure we hang here */ -} - -__attribute__((weak)) int _read(int file, char *ptr, int len) -{ - int DataIdx; - - for (DataIdx = 0; DataIdx < len; DataIdx++) - { - *ptr++ = __io_getchar(); - } - -return len; -} - -__attribute__((weak)) int _write(int file, char *ptr, int len) -{ - int DataIdx; - - for (DataIdx = 0; DataIdx < len; DataIdx++) - { - __io_putchar(*ptr++); - } - return len; -} - -int _close(int file) -{ - return -1; -} - - -int _fstat(int file, struct stat *st) -{ - st->st_mode = S_IFCHR; - return 0; -} - -int _isatty(int file) -{ - return 1; -} - -int _lseek(int file, int ptr, int dir) -{ - return 0; -} - -int _open(char *path, int flags, ...) -{ - /* Pretend like we always fail */ - return -1; -} - -int _wait(int *status) -{ - errno = ECHILD; - return -1; -} - -int _unlink(char *name) -{ - errno = ENOENT; - return -1; -} - -int _times(struct tms *buf) -{ - return -1; -} - -int _stat(char *file, struct stat *st) -{ - st->st_mode = S_IFCHR; - return 0; -} - -int _link(char *old, char *new) -{ - errno = EMLINK; - return -1; -} - -int _fork(void) -{ - errno = EAGAIN; - return -1; -} - -int _execve(char *name, char **argv, char **env) -{ - errno = ENOMEM; - return -1; -} diff --git a/test_dma/Core/Src/sysmem.c b/test_dma/Core/Src/sysmem.c deleted file mode 100644 index e5e1bc2..0000000 --- a/test_dma/Core/Src/sysmem.c +++ /dev/null @@ -1,83 +0,0 @@ -/** -***************************************************************************** -** -** File : sysmem.c -** -** Author : Auto-generated by STM32CubeIDE -** -** Abstract : STM32CubeIDE Minimal System Memory calls file -** -** For more information about which c-functions -** need which of these lowlevel functions -** please consult the Newlib libc-manual -** -** Environment : STM32CubeIDE MCU -** -** Distribution: The file is distributed as is, without any warranty -** of any kind. -** -***************************************************************************** -** -**

© COPYRIGHT(c) 2018 STMicroelectronics

-** -** Redistribution and use in source and binary forms, with or without modification, -** are permitted provided that the following conditions are met: -** 1. Redistributions of source code must retain the above copyright notice, -** this list of conditions and the following disclaimer. -** 2. Redistributions in binary form must reproduce the above copyright notice, -** this list of conditions and the following disclaimer in the documentation -** and/or other materials provided with the distribution. -** 3. Neither the name of STMicroelectronics nor the names of its contributors -** may be used to endorse or promote products derived from this software -** without specific prior written permission. -** -** THIS SOFTWARE IS PROVIDED BY THE COPYRIGHT HOLDERS AND CONTRIBUTORS "AS IS" -** AND ANY EXPRESS OR IMPLIED WARRANTIES, INCLUDING, BUT NOT LIMITED TO, THE -** IMPLIED WARRANTIES OF MERCHANTABILITY AND FITNESS FOR A PARTICULAR PURPOSE ARE -** DISCLAIMED. IN NO EVENT SHALL THE COPYRIGHT HOLDER OR CONTRIBUTORS BE LIABLE -** FOR ANY DIRECT, INDIRECT, INCIDENTAL, SPECIAL, EXEMPLARY, OR CONSEQUENTIAL -** DAMAGES (INCLUDING, BUT NOT LIMITED TO, PROCUREMENT OF SUBSTITUTE GOODS OR -** SERVICES; LOSS OF USE, DATA, OR PROFITS; OR BUSINESS INTERRUPTION) HOWEVER -** CAUSED AND ON ANY THEORY OF LIABILITY, WHETHER IN CONTRACT, STRICT LIABILITY, -** OR TORT (INCLUDING NEGLIGENCE OR OTHERWISE) ARISING IN ANY WAY OUT OF THE USE -** OF THIS SOFTWARE, EVEN IF ADVISED OF THE POSSIBILITY OF SUCH DAMAGE. -** -** -***************************************************************************** -*/ - -/* Includes */ -#include -#include - -/* Variables */ -extern int errno; -register char * stack_ptr asm("sp"); - -/* Functions */ - -/** - _sbrk - Increase program data space. Malloc and related functions depend on this -**/ -caddr_t _sbrk(int incr) -{ - extern char end asm("end"); - static char *heap_end; - char *prev_heap_end; - - if (heap_end == 0) - heap_end = &end; - - prev_heap_end = heap_end; - if (heap_end + incr > stack_ptr) - { - errno = ENOMEM; - return (caddr_t) -1; - } - - heap_end += incr; - - return (caddr_t) prev_heap_end; -} - diff --git a/test_dma/Core/Src/system_stm32f7xx.c b/test_dma/Core/Src/system_stm32f7xx.c deleted file mode 100644 index 1a362bd..0000000 --- a/test_dma/Core/Src/system_stm32f7xx.c +++ /dev/null @@ -1,278 +0,0 @@ -/** - ****************************************************************************** - * @file system_stm32f7xx.c - * @author MCD Application Team - * @brief CMSIS Cortex-M7 Device Peripheral Access Layer System Source File. - * - * This file provides two functions and one global variable to be called from - * user application: - * - SystemInit(): This function is called at startup just after reset and - * before branch to main program. This call is made inside - * the "startup_stm32f7xx.s" file. - * - * - SystemCoreClock variable: Contains the core clock (HCLK), it can be used - * by the user application to setup the SysTick - * timer or configure other parameters. - * - * - SystemCoreClockUpdate(): Updates the variable SystemCoreClock and must - * be called whenever the core clock is changed - * during program execution. - * - * - ****************************************************************************** - * @attention - * - *

© COPYRIGHT 2016 STMicroelectronics

- * - * Redistribution and use in source and binary forms, with or without modification, - * are permitted provided that the following conditions are met: - * 1. Redistributions of source code must retain the above copyright notice, - * this list of conditions and the following disclaimer. - * 2. Redistributions in binary form must reproduce the above copyright notice, - * this list of conditions and the following disclaimer in the documentation - * and/or other materials provided with the distribution. - * 3. Neither the name of STMicroelectronics nor the names of its contributors - * may be used to endorse or promote products derived from this software - * without specific prior written permission. - * - * THIS SOFTWARE IS PROVIDED BY THE COPYRIGHT HOLDERS AND CONTRIBUTORS "AS IS" - * AND ANY EXPRESS OR IMPLIED WARRANTIES, INCLUDING, BUT NOT LIMITED TO, THE - * IMPLIED WARRANTIES OF MERCHANTABILITY AND FITNESS FOR A PARTICULAR PURPOSE ARE - * DISCLAIMED. IN NO EVENT SHALL THE COPYRIGHT HOLDER OR CONTRIBUTORS BE LIABLE - * FOR ANY DIRECT, INDIRECT, INCIDENTAL, SPECIAL, EXEMPLARY, OR CONSEQUENTIAL - * DAMAGES (INCLUDING, BUT NOT LIMITED TO, PROCUREMENT OF SUBSTITUTE GOODS OR - * SERVICES; LOSS OF USE, DATA, OR PROFITS; OR BUSINESS INTERRUPTION) HOWEVER - * CAUSED AND ON ANY THEORY OF LIABILITY, WHETHER IN CONTRACT, STRICT LIABILITY, - * OR TORT (INCLUDING NEGLIGENCE OR OTHERWISE) ARISING IN ANY WAY OUT OF THE USE - * OF THIS SOFTWARE, EVEN IF ADVISED OF THE POSSIBILITY OF SUCH DAMAGE. - * - ****************************************************************************** - */ - -/** @addtogroup CMSIS - * @{ - */ - -/** @addtogroup stm32f7xx_system - * @{ - */ - -/** @addtogroup STM32F7xx_System_Private_Includes - * @{ - */ - -#include "stm32f7xx.h" - -#if !defined (HSE_VALUE) - #define HSE_VALUE ((uint32_t)25000000) /*!< Default value of the External oscillator in Hz */ -#endif /* HSE_VALUE */ - -#if !defined (HSI_VALUE) - #define HSI_VALUE ((uint32_t)16000000) /*!< Value of the Internal oscillator in Hz*/ -#endif /* HSI_VALUE */ - -/** - * @} - */ - -/** @addtogroup STM32F7xx_System_Private_TypesDefinitions - * @{ - */ - -/** - * @} - */ - -/** @addtogroup STM32F7xx_System_Private_Defines - * @{ - */ - -/************************* Miscellaneous Configuration ************************/ - -/*!< Uncomment the following line if you need to relocate your vector Table in - Internal SRAM. */ -/* #define VECT_TAB_SRAM */ -#define VECT_TAB_OFFSET 0x00 /*!< Vector Table base offset field. - This value must be a multiple of 0x200. */ -/******************************************************************************/ - -/** - * @} - */ - -/** @addtogroup STM32F7xx_System_Private_Macros - * @{ - */ - -/** - * @} - */ - -/** @addtogroup STM32F7xx_System_Private_Variables - * @{ - */ - - /* This variable is updated in three ways: - 1) by calling CMSIS function SystemCoreClockUpdate() - 2) by calling HAL API function HAL_RCC_GetHCLKFreq() - 3) each time HAL_RCC_ClockConfig() is called to configure the system clock frequency - Note: If you use this function to configure the system clock; then there - is no need to call the 2 first functions listed above, since SystemCoreClock - variable is updated automatically. - */ - uint32_t SystemCoreClock = 16000000; - const uint8_t AHBPrescTable[16] = {0, 0, 0, 0, 0, 0, 0, 0, 1, 2, 3, 4, 6, 7, 8, 9}; - const uint8_t APBPrescTable[8] = {0, 0, 0, 0, 1, 2, 3, 4}; - -/** - * @} - */ - -/** @addtogroup STM32F7xx_System_Private_FunctionPrototypes - * @{ - */ - -/** - * @} - */ - -/** @addtogroup STM32F7xx_System_Private_Functions - * @{ - */ - -/** - * @brief Setup the microcontroller system - * Initialize the Embedded Flash Interface, the PLL and update the - * SystemFrequency variable. - * @param None - * @retval None - */ -void SystemInit(void) -{ - /* FPU settings ------------------------------------------------------------*/ - #if (__FPU_PRESENT == 1) && (__FPU_USED == 1) - SCB->CPACR |= ((3UL << 10*2)|(3UL << 11*2)); /* set CP10 and CP11 Full Access */ - #endif - /* Reset the RCC clock configuration to the default reset state ------------*/ - /* Set HSION bit */ - RCC->CR |= (uint32_t)0x00000001; - - /* Reset CFGR register */ - RCC->CFGR = 0x00000000; - - /* Reset HSEON, CSSON and PLLON bits */ - RCC->CR &= (uint32_t)0xFEF6FFFF; - - /* Reset PLLCFGR register */ - RCC->PLLCFGR = 0x24003010; - - /* Reset HSEBYP bit */ - RCC->CR &= (uint32_t)0xFFFBFFFF; - - /* Disable all interrupts */ - RCC->CIR = 0x00000000; - - /* Configure the Vector Table location add offset address ------------------*/ -#ifdef VECT_TAB_SRAM - SCB->VTOR = RAMDTCM_BASE | VECT_TAB_OFFSET; /* Vector Table Relocation in Internal SRAM */ -#else - SCB->VTOR = FLASH_BASE | VECT_TAB_OFFSET; /* Vector Table Relocation in Internal FLASH */ -#endif -} - -/** - * @brief Update SystemCoreClock variable according to Clock Register Values. - * The SystemCoreClock variable contains the core clock (HCLK), it can - * be used by the user application to setup the SysTick timer or configure - * other parameters. - * - * @note Each time the core clock (HCLK) changes, this function must be called - * to update SystemCoreClock variable value. Otherwise, any configuration - * based on this variable will be incorrect. - * - * @note - The system frequency computed by this function is not the real - * frequency in the chip. It is calculated based on the predefined - * constant and the selected clock source: - * - * - If SYSCLK source is HSI, SystemCoreClock will contain the HSI_VALUE(*) - * - * - If SYSCLK source is HSE, SystemCoreClock will contain the HSE_VALUE(**) - * - * - If SYSCLK source is PLL, SystemCoreClock will contain the HSE_VALUE(**) - * or HSI_VALUE(*) multiplied/divided by the PLL factors. - * - * (*) HSI_VALUE is a constant defined in stm32f7xx_hal_conf.h file (default value - * 16 MHz) but the real value may vary depending on the variations - * in voltage and temperature. - * - * (**) HSE_VALUE is a constant defined in stm32f7xx_hal_conf.h file (default value - * 25 MHz), user has to ensure that HSE_VALUE is same as the real - * frequency of the crystal used. Otherwise, this function may - * have wrong result. - * - * - The result of this function could be not correct when using fractional - * value for HSE crystal. - * - * @param None - * @retval None - */ -void SystemCoreClockUpdate(void) -{ - uint32_t tmp = 0, pllvco = 0, pllp = 2, pllsource = 0, pllm = 2; - - /* Get SYSCLK source -------------------------------------------------------*/ - tmp = RCC->CFGR & RCC_CFGR_SWS; - - switch (tmp) - { - case 0x00: /* HSI used as system clock source */ - SystemCoreClock = HSI_VALUE; - break; - case 0x04: /* HSE used as system clock source */ - SystemCoreClock = HSE_VALUE; - break; - case 0x08: /* PLL used as system clock source */ - - /* PLL_VCO = (HSE_VALUE or HSI_VALUE / PLL_M) * PLL_N - SYSCLK = PLL_VCO / PLL_P - */ - pllsource = (RCC->PLLCFGR & RCC_PLLCFGR_PLLSRC) >> 22; - pllm = RCC->PLLCFGR & RCC_PLLCFGR_PLLM; - - if (pllsource != 0) - { - /* HSE used as PLL clock source */ - pllvco = (HSE_VALUE / pllm) * ((RCC->PLLCFGR & RCC_PLLCFGR_PLLN) >> 6); - } - else - { - /* HSI used as PLL clock source */ - pllvco = (HSI_VALUE / pllm) * ((RCC->PLLCFGR & RCC_PLLCFGR_PLLN) >> 6); - } - - pllp = (((RCC->PLLCFGR & RCC_PLLCFGR_PLLP) >>16) + 1 ) *2; - SystemCoreClock = pllvco/pllp; - break; - default: - SystemCoreClock = HSI_VALUE; - break; - } - /* Compute HCLK frequency --------------------------------------------------*/ - /* Get HCLK prescaler */ - tmp = AHBPrescTable[((RCC->CFGR & RCC_CFGR_HPRE) >> 4)]; - /* HCLK frequency */ - SystemCoreClock >>= tmp; -} - -/** - * @} - */ - -/** - * @} - */ - -/** - * @} - */ -/************************ (C) COPYRIGHT STMicroelectronics *****END OF FILE****/ diff --git a/test_dma/Core/Startup/startup_stm32f767zitx.s b/test_dma/Core/Startup/startup_stm32f767zitx.s deleted file mode 100644 index c33cf89..0000000 --- a/test_dma/Core/Startup/startup_stm32f767zitx.s +++ /dev/null @@ -1,634 +0,0 @@ -/** - ****************************************************************************** - * @file startup_stm32f767xx.s - * @author MCD Application Team - * @brief STM32F767xx Devices vector table for GCC based toolchain. - * This module performs: - * - Set the initial SP - * - Set the initial PC == Reset_Handler, - * - Set the vector table entries with the exceptions ISR address - * - Branches to main in the C library (which eventually - * calls main()). - * After Reset the Cortex-M7 processor is in Thread mode, - * priority is Privileged, and the Stack is set to Main. - ****************************************************************************** - * @attention - * - *

© COPYRIGHT 2016 STMicroelectronics

- * - * Redistribution and use in source and binary forms, with or without modification, - * are permitted provided that the following conditions are met: - * 1. Redistributions of source code must retain the above copyright notice, - * this list of conditions and the following disclaimer. - * 2. Redistributions in binary form must reproduce the above copyright notice, - * this list of conditions and the following disclaimer in the documentation - * and/or other materials provided with the distribution. - * 3. Neither the name of STMicroelectronics nor the names of its contributors - * may be used to endorse or promote products derived from this software - * without specific prior written permission. - * - * THIS SOFTWARE IS PROVIDED BY THE COPYRIGHT HOLDERS AND CONTRIBUTORS "AS IS" - * AND ANY EXPRESS OR IMPLIED WARRANTIES, INCLUDING, BUT NOT LIMITED TO, THE - * IMPLIED WARRANTIES OF MERCHANTABILITY AND FITNESS FOR A PARTICULAR PURPOSE ARE - * DISCLAIMED. IN NO EVENT SHALL THE COPYRIGHT HOLDER OR CONTRIBUTORS BE LIABLE - * FOR ANY DIRECT, INDIRECT, INCIDENTAL, SPECIAL, EXEMPLARY, OR CONSEQUENTIAL - * DAMAGES (INCLUDING, BUT NOT LIMITED TO, PROCUREMENT OF SUBSTITUTE GOODS OR - * SERVICES; LOSS OF USE, DATA, OR PROFITS; OR BUSINESS INTERRUPTION) HOWEVER - * CAUSED AND ON ANY THEORY OF LIABILITY, WHETHER IN CONTRACT, STRICT LIABILITY, - * OR TORT (INCLUDING NEGLIGENCE OR OTHERWISE) ARISING IN ANY WAY OUT OF THE USE - * OF THIS SOFTWARE, EVEN IF ADVISED OF THE POSSIBILITY OF SUCH DAMAGE. - * - ****************************************************************************** - */ - - .syntax unified - .cpu cortex-m7 - .fpu softvfp - .thumb - -.global g_pfnVectors -.global Default_Handler - -/* start address for the initialization values of the .data section. -defined in linker script */ -.word _sidata -/* start address for the .data section. defined in linker script */ -.word _sdata -/* end address for the .data section. defined in linker script */ -.word _edata -/* start address for the .bss section. defined in linker script */ -.word _sbss -/* end address for the .bss section. defined in linker script */ -.word _ebss -/* stack used for SystemInit_ExtMemCtl; always internal RAM used */ - -/** - * @brief This is the code that gets called when the processor first - * starts execution following a reset event. Only the absolutely - * necessary set is performed, after which the application - * supplied main() routine is called. - * @param None - * @retval : None -*/ - - .section .text.Reset_Handler - .weak Reset_Handler - .type Reset_Handler, %function -Reset_Handler: - ldr sp, =_estack /* set stack pointer */ - -/* Copy the data segment initializers from flash to SRAM */ - movs r1, #0 - b LoopCopyDataInit - -CopyDataInit: - ldr r3, =_sidata - ldr r3, [r3, r1] - str r3, [r0, r1] - adds r1, r1, #4 - -LoopCopyDataInit: - ldr r0, =_sdata - ldr r3, =_edata - adds r2, r0, r1 - cmp r2, r3 - bcc CopyDataInit - ldr r2, =_sbss - b LoopFillZerobss -/* Zero fill the bss segment. */ -FillZerobss: - movs r3, #0 - str r3, [r2], #4 - -LoopFillZerobss: - ldr r3, = _ebss - cmp r2, r3 - bcc FillZerobss - -/* Call the clock system initialization function.*/ - bl SystemInit -/* Call static constructors */ - bl __libc_init_array -/* Call the application's entry point.*/ - bl main - bx lr -.size Reset_Handler, .-Reset_Handler - -/** - * @brief This is the code that gets called when the processor receives an - * unexpected interrupt. This simply enters an infinite loop, preserving - * the system state for examination by a debugger. - * @param None - * @retval None -*/ - .section .text.Default_Handler,"ax",%progbits -Default_Handler: -Infinite_Loop: - b Infinite_Loop - .size Default_Handler, .-Default_Handler -/****************************************************************************** -* -* The minimal vector table for a Cortex M7. Note that the proper constructs -* must be placed on this to ensure that it ends up at physical address -* 0x0000.0000. -* -*******************************************************************************/ - .section .isr_vector,"a",%progbits - .type g_pfnVectors, %object - .size g_pfnVectors, .-g_pfnVectors - - -g_pfnVectors: - .word _estack - .word Reset_Handler - - .word NMI_Handler - .word HardFault_Handler - .word MemManage_Handler - .word BusFault_Handler - .word UsageFault_Handler - .word 0 - .word 0 - .word 0 - .word 0 - .word SVC_Handler - .word DebugMon_Handler - .word 0 - .word PendSV_Handler - .word SysTick_Handler - - /* External Interrupts */ - .word WWDG_IRQHandler /* Window WatchDog */ - .word PVD_IRQHandler /* PVD through EXTI Line detection */ - .word TAMP_STAMP_IRQHandler /* Tamper and TimeStamps through the EXTI line */ - .word RTC_WKUP_IRQHandler /* RTC Wakeup through the EXTI line */ - .word FLASH_IRQHandler /* FLASH */ - .word RCC_IRQHandler /* RCC */ - .word EXTI0_IRQHandler /* EXTI Line0 */ - .word EXTI1_IRQHandler /* EXTI Line1 */ - .word EXTI2_IRQHandler /* EXTI Line2 */ - .word EXTI3_IRQHandler /* EXTI Line3 */ - .word EXTI4_IRQHandler /* EXTI Line4 */ - .word DMA1_Stream0_IRQHandler /* DMA1 Stream 0 */ - .word DMA1_Stream1_IRQHandler /* DMA1 Stream 1 */ - .word DMA1_Stream2_IRQHandler /* DMA1 Stream 2 */ - .word DMA1_Stream3_IRQHandler /* DMA1 Stream 3 */ - .word DMA1_Stream4_IRQHandler /* DMA1 Stream 4 */ - .word DMA1_Stream5_IRQHandler /* DMA1 Stream 5 */ - .word DMA1_Stream6_IRQHandler /* DMA1 Stream 6 */ - .word ADC_IRQHandler /* ADC1, ADC2 and ADC3s */ - .word CAN1_TX_IRQHandler /* CAN1 TX */ - .word CAN1_RX0_IRQHandler /* CAN1 RX0 */ - .word CAN1_RX1_IRQHandler /* CAN1 RX1 */ - .word CAN1_SCE_IRQHandler /* CAN1 SCE */ - .word EXTI9_5_IRQHandler /* External Line[9:5]s */ - .word TIM1_BRK_TIM9_IRQHandler /* TIM1 Break and TIM9 */ - .word TIM1_UP_TIM10_IRQHandler /* TIM1 Update and TIM10 */ - .word TIM1_TRG_COM_TIM11_IRQHandler /* TIM1 Trigger and Commutation and TIM11 */ - .word TIM1_CC_IRQHandler /* TIM1 Capture Compare */ - .word TIM2_IRQHandler /* TIM2 */ - .word TIM3_IRQHandler /* TIM3 */ - .word TIM4_IRQHandler /* TIM4 */ - .word I2C1_EV_IRQHandler /* I2C1 Event */ - .word I2C1_ER_IRQHandler /* I2C1 Error */ - .word I2C2_EV_IRQHandler /* I2C2 Event */ - .word I2C2_ER_IRQHandler /* I2C2 Error */ - .word SPI1_IRQHandler /* SPI1 */ - .word SPI2_IRQHandler /* SPI2 */ - .word USART1_IRQHandler /* USART1 */ - .word USART2_IRQHandler /* USART2 */ - .word USART3_IRQHandler /* USART3 */ - .word EXTI15_10_IRQHandler /* External Line[15:10]s */ - .word RTC_Alarm_IRQHandler /* RTC Alarm (A and B) through EXTI Line */ - .word OTG_FS_WKUP_IRQHandler /* USB OTG FS Wakeup through EXTI line */ - .word TIM8_BRK_TIM12_IRQHandler /* TIM8 Break and TIM12 */ - .word TIM8_UP_TIM13_IRQHandler /* TIM8 Update and TIM13 */ - .word TIM8_TRG_COM_TIM14_IRQHandler /* TIM8 Trigger and Commutation and TIM14 */ - .word TIM8_CC_IRQHandler /* TIM8 Capture Compare */ - .word DMA1_Stream7_IRQHandler /* DMA1 Stream7 */ - .word FMC_IRQHandler /* FMC */ - .word SDMMC1_IRQHandler /* SDMMC1 */ - .word TIM5_IRQHandler /* TIM5 */ - .word SPI3_IRQHandler /* SPI3 */ - .word UART4_IRQHandler /* UART4 */ - .word UART5_IRQHandler /* UART5 */ - .word TIM6_DAC_IRQHandler /* TIM6 and DAC1&2 underrun errors */ - .word TIM7_IRQHandler /* TIM7 */ - .word DMA2_Stream0_IRQHandler /* DMA2 Stream 0 */ - .word DMA2_Stream1_IRQHandler /* DMA2 Stream 1 */ - .word DMA2_Stream2_IRQHandler /* DMA2 Stream 2 */ - .word DMA2_Stream3_IRQHandler /* DMA2 Stream 3 */ - .word DMA2_Stream4_IRQHandler /* DMA2 Stream 4 */ - .word ETH_IRQHandler /* Ethernet */ - .word ETH_WKUP_IRQHandler /* Ethernet Wakeup through EXTI line */ - .word CAN2_TX_IRQHandler /* CAN2 TX */ - .word CAN2_RX0_IRQHandler /* CAN2 RX0 */ - .word CAN2_RX1_IRQHandler /* CAN2 RX1 */ - .word CAN2_SCE_IRQHandler /* CAN2 SCE */ - .word OTG_FS_IRQHandler /* USB OTG FS */ - .word DMA2_Stream5_IRQHandler /* DMA2 Stream 5 */ - .word DMA2_Stream6_IRQHandler /* DMA2 Stream 6 */ - .word DMA2_Stream7_IRQHandler /* DMA2 Stream 7 */ - .word USART6_IRQHandler /* USART6 */ - .word I2C3_EV_IRQHandler /* I2C3 event */ - .word I2C3_ER_IRQHandler /* I2C3 error */ - .word OTG_HS_EP1_OUT_IRQHandler /* USB OTG HS End Point 1 Out */ - .word OTG_HS_EP1_IN_IRQHandler /* USB OTG HS End Point 1 In */ - .word OTG_HS_WKUP_IRQHandler /* USB OTG HS Wakeup through EXTI */ - .word OTG_HS_IRQHandler /* USB OTG HS */ - .word DCMI_IRQHandler /* DCMI */ - .word 0 /* Reserved */ - .word RNG_IRQHandler /* RNG */ - .word FPU_IRQHandler /* FPU */ - .word UART7_IRQHandler /* UART7 */ - .word UART8_IRQHandler /* UART8 */ - .word SPI4_IRQHandler /* SPI4 */ - .word SPI5_IRQHandler /* SPI5 */ - .word SPI6_IRQHandler /* SPI6 */ - .word SAI1_IRQHandler /* SAI1 */ - .word LTDC_IRQHandler /* LTDC */ - .word LTDC_ER_IRQHandler /* LTDC error */ - .word DMA2D_IRQHandler /* DMA2D */ - .word SAI2_IRQHandler /* SAI2 */ - .word QUADSPI_IRQHandler /* QUADSPI */ - .word LPTIM1_IRQHandler /* LPTIM1 */ - .word CEC_IRQHandler /* HDMI_CEC */ - .word I2C4_EV_IRQHandler /* I2C4 Event */ - .word I2C4_ER_IRQHandler /* I2C4 Error */ - .word SPDIF_RX_IRQHandler /* SPDIF_RX */ - .word 0 /* Reserved */ - .word DFSDM1_FLT0_IRQHandler /* DFSDM1 Filter 0 global Interrupt */ - .word DFSDM1_FLT1_IRQHandler /* DFSDM1 Filter 1 global Interrupt */ - .word DFSDM1_FLT2_IRQHandler /* DFSDM1 Filter 2 global Interrupt */ - .word DFSDM1_FLT3_IRQHandler /* DFSDM1 Filter 3 global Interrupt */ - .word SDMMC2_IRQHandler /* SDMMC2 */ - .word CAN3_TX_IRQHandler /* CAN3 TX */ - .word CAN3_RX0_IRQHandler /* CAN3 RX0 */ - .word CAN3_RX1_IRQHandler /* CAN3 RX1 */ - .word CAN3_SCE_IRQHandler /* CAN3 SCE */ - .word JPEG_IRQHandler /* JPEG */ - .word MDIOS_IRQHandler /* MDIOS */ - -/******************************************************************************* -* -* Provide weak aliases for each Exception handler to the Default_Handler. -* As they are weak aliases, any function with the same name will override -* this definition. -* -*******************************************************************************/ - .weak NMI_Handler - .thumb_set NMI_Handler,Default_Handler - - .weak HardFault_Handler - .thumb_set HardFault_Handler,Default_Handler - - .weak MemManage_Handler - .thumb_set MemManage_Handler,Default_Handler - - .weak BusFault_Handler - .thumb_set BusFault_Handler,Default_Handler - - .weak UsageFault_Handler - .thumb_set UsageFault_Handler,Default_Handler - - .weak SVC_Handler - .thumb_set SVC_Handler,Default_Handler - - .weak DebugMon_Handler - .thumb_set DebugMon_Handler,Default_Handler - - .weak PendSV_Handler - .thumb_set PendSV_Handler,Default_Handler - - .weak SysTick_Handler - .thumb_set SysTick_Handler,Default_Handler - - .weak WWDG_IRQHandler - .thumb_set WWDG_IRQHandler,Default_Handler - - .weak PVD_IRQHandler - .thumb_set PVD_IRQHandler,Default_Handler - - .weak TAMP_STAMP_IRQHandler - .thumb_set TAMP_STAMP_IRQHandler,Default_Handler - - .weak RTC_WKUP_IRQHandler - .thumb_set RTC_WKUP_IRQHandler,Default_Handler - - .weak FLASH_IRQHandler - .thumb_set FLASH_IRQHandler,Default_Handler - - .weak RCC_IRQHandler - .thumb_set RCC_IRQHandler,Default_Handler - - .weak EXTI0_IRQHandler - .thumb_set EXTI0_IRQHandler,Default_Handler - - .weak EXTI1_IRQHandler - .thumb_set EXTI1_IRQHandler,Default_Handler - - .weak EXTI2_IRQHandler - .thumb_set EXTI2_IRQHandler,Default_Handler - - .weak EXTI3_IRQHandler - .thumb_set EXTI3_IRQHandler,Default_Handler - - .weak EXTI4_IRQHandler - .thumb_set EXTI4_IRQHandler,Default_Handler - - .weak DMA1_Stream0_IRQHandler - .thumb_set DMA1_Stream0_IRQHandler,Default_Handler - - .weak DMA1_Stream1_IRQHandler - .thumb_set DMA1_Stream1_IRQHandler,Default_Handler - - .weak DMA1_Stream2_IRQHandler - .thumb_set DMA1_Stream2_IRQHandler,Default_Handler - - .weak DMA1_Stream3_IRQHandler - .thumb_set DMA1_Stream3_IRQHandler,Default_Handler - - .weak DMA1_Stream4_IRQHandler - .thumb_set DMA1_Stream4_IRQHandler,Default_Handler - - .weak DMA1_Stream5_IRQHandler - .thumb_set DMA1_Stream5_IRQHandler,Default_Handler - - .weak DMA1_Stream6_IRQHandler - .thumb_set DMA1_Stream6_IRQHandler,Default_Handler - - .weak ADC_IRQHandler - .thumb_set ADC_IRQHandler,Default_Handler - - .weak CAN1_TX_IRQHandler - .thumb_set CAN1_TX_IRQHandler,Default_Handler - - .weak CAN1_RX0_IRQHandler - .thumb_set CAN1_RX0_IRQHandler,Default_Handler - - .weak CAN1_RX1_IRQHandler - .thumb_set CAN1_RX1_IRQHandler,Default_Handler - - .weak CAN1_SCE_IRQHandler - .thumb_set CAN1_SCE_IRQHandler,Default_Handler - - .weak EXTI9_5_IRQHandler - .thumb_set EXTI9_5_IRQHandler,Default_Handler - - .weak TIM1_BRK_TIM9_IRQHandler - .thumb_set TIM1_BRK_TIM9_IRQHandler,Default_Handler - - .weak TIM1_UP_TIM10_IRQHandler - .thumb_set TIM1_UP_TIM10_IRQHandler,Default_Handler - - .weak TIM1_TRG_COM_TIM11_IRQHandler - .thumb_set TIM1_TRG_COM_TIM11_IRQHandler,Default_Handler - - .weak TIM1_CC_IRQHandler - .thumb_set TIM1_CC_IRQHandler,Default_Handler - - .weak TIM2_IRQHandler - .thumb_set TIM2_IRQHandler,Default_Handler - - .weak TIM3_IRQHandler - .thumb_set TIM3_IRQHandler,Default_Handler - - .weak TIM4_IRQHandler - .thumb_set TIM4_IRQHandler,Default_Handler - - .weak I2C1_EV_IRQHandler - .thumb_set I2C1_EV_IRQHandler,Default_Handler - - .weak I2C1_ER_IRQHandler - .thumb_set I2C1_ER_IRQHandler,Default_Handler - - .weak I2C2_EV_IRQHandler - .thumb_set I2C2_EV_IRQHandler,Default_Handler - - .weak I2C2_ER_IRQHandler - .thumb_set I2C2_ER_IRQHandler,Default_Handler - - .weak SPI1_IRQHandler - .thumb_set SPI1_IRQHandler,Default_Handler - - .weak SPI2_IRQHandler - .thumb_set SPI2_IRQHandler,Default_Handler - - .weak USART1_IRQHandler - .thumb_set USART1_IRQHandler,Default_Handler - - .weak USART2_IRQHandler - .thumb_set USART2_IRQHandler,Default_Handler - - .weak USART3_IRQHandler - .thumb_set USART3_IRQHandler,Default_Handler - - .weak EXTI15_10_IRQHandler - .thumb_set EXTI15_10_IRQHandler,Default_Handler - - .weak RTC_Alarm_IRQHandler - .thumb_set RTC_Alarm_IRQHandler,Default_Handler - - .weak OTG_FS_WKUP_IRQHandler - .thumb_set OTG_FS_WKUP_IRQHandler,Default_Handler - - .weak TIM8_BRK_TIM12_IRQHandler - .thumb_set TIM8_BRK_TIM12_IRQHandler,Default_Handler - - .weak TIM8_UP_TIM13_IRQHandler - .thumb_set TIM8_UP_TIM13_IRQHandler,Default_Handler - - .weak TIM8_TRG_COM_TIM14_IRQHandler - .thumb_set TIM8_TRG_COM_TIM14_IRQHandler,Default_Handler - - .weak TIM8_CC_IRQHandler - .thumb_set TIM8_CC_IRQHandler,Default_Handler - - .weak DMA1_Stream7_IRQHandler - .thumb_set DMA1_Stream7_IRQHandler,Default_Handler - - .weak FMC_IRQHandler - .thumb_set FMC_IRQHandler,Default_Handler - - .weak SDMMC1_IRQHandler - .thumb_set SDMMC1_IRQHandler,Default_Handler - - .weak TIM5_IRQHandler - .thumb_set TIM5_IRQHandler,Default_Handler - - .weak SPI3_IRQHandler - .thumb_set SPI3_IRQHandler,Default_Handler - - .weak UART4_IRQHandler - .thumb_set UART4_IRQHandler,Default_Handler - - .weak UART5_IRQHandler - .thumb_set UART5_IRQHandler,Default_Handler - - .weak TIM6_DAC_IRQHandler - .thumb_set TIM6_DAC_IRQHandler,Default_Handler - - .weak TIM7_IRQHandler - .thumb_set TIM7_IRQHandler,Default_Handler - - .weak DMA2_Stream0_IRQHandler - .thumb_set DMA2_Stream0_IRQHandler,Default_Handler - - .weak DMA2_Stream1_IRQHandler - .thumb_set DMA2_Stream1_IRQHandler,Default_Handler - - .weak DMA2_Stream2_IRQHandler - .thumb_set DMA2_Stream2_IRQHandler,Default_Handler - - .weak DMA2_Stream3_IRQHandler - .thumb_set DMA2_Stream3_IRQHandler,Default_Handler - - .weak DMA2_Stream4_IRQHandler - .thumb_set DMA2_Stream4_IRQHandler,Default_Handler - - .weak DMA2_Stream4_IRQHandler - .thumb_set DMA2_Stream4_IRQHandler,Default_Handler - - .weak ETH_IRQHandler - .thumb_set ETH_IRQHandler,Default_Handler - - .weak ETH_WKUP_IRQHandler - .thumb_set ETH_WKUP_IRQHandler,Default_Handler - - .weak CAN2_TX_IRQHandler - .thumb_set CAN2_TX_IRQHandler,Default_Handler - - .weak CAN2_RX0_IRQHandler - .thumb_set CAN2_RX0_IRQHandler,Default_Handler - - .weak CAN2_RX1_IRQHandler - .thumb_set CAN2_RX1_IRQHandler,Default_Handler - - .weak CAN2_SCE_IRQHandler - .thumb_set CAN2_SCE_IRQHandler,Default_Handler - - .weak OTG_FS_IRQHandler - .thumb_set OTG_FS_IRQHandler,Default_Handler - - .weak DMA2_Stream5_IRQHandler - .thumb_set DMA2_Stream5_IRQHandler,Default_Handler - - .weak DMA2_Stream6_IRQHandler - .thumb_set DMA2_Stream6_IRQHandler,Default_Handler - - .weak DMA2_Stream7_IRQHandler - .thumb_set DMA2_Stream7_IRQHandler,Default_Handler - - .weak USART6_IRQHandler - .thumb_set USART6_IRQHandler,Default_Handler - - .weak I2C3_EV_IRQHandler - .thumb_set I2C3_EV_IRQHandler,Default_Handler - - .weak I2C3_ER_IRQHandler - .thumb_set I2C3_ER_IRQHandler,Default_Handler - - .weak OTG_HS_EP1_OUT_IRQHandler - .thumb_set OTG_HS_EP1_OUT_IRQHandler,Default_Handler - - .weak OTG_HS_EP1_IN_IRQHandler - .thumb_set OTG_HS_EP1_IN_IRQHandler,Default_Handler - - .weak OTG_HS_WKUP_IRQHandler - .thumb_set OTG_HS_WKUP_IRQHandler,Default_Handler - - .weak OTG_HS_IRQHandler - .thumb_set OTG_HS_IRQHandler,Default_Handler - - .weak DCMI_IRQHandler - .thumb_set DCMI_IRQHandler,Default_Handler - - .weak RNG_IRQHandler - .thumb_set RNG_IRQHandler,Default_Handler - - .weak FPU_IRQHandler - .thumb_set FPU_IRQHandler,Default_Handler - - .weak UART7_IRQHandler - .thumb_set UART7_IRQHandler,Default_Handler - - .weak UART8_IRQHandler - .thumb_set UART8_IRQHandler,Default_Handler - - .weak SPI4_IRQHandler - .thumb_set SPI4_IRQHandler,Default_Handler - - .weak SPI5_IRQHandler - .thumb_set SPI5_IRQHandler,Default_Handler - - .weak SPI6_IRQHandler - .thumb_set SPI6_IRQHandler,Default_Handler - - .weak SAI1_IRQHandler - .thumb_set SAI1_IRQHandler,Default_Handler - - .weak LTDC_IRQHandler - .thumb_set LTDC_IRQHandler,Default_Handler - - .weak LTDC_ER_IRQHandler - .thumb_set LTDC_ER_IRQHandler,Default_Handler - - .weak DMA2D_IRQHandler - .thumb_set DMA2D_IRQHandler,Default_Handler - - .weak SAI2_IRQHandler - .thumb_set SAI2_IRQHandler,Default_Handler - - .weak QUADSPI_IRQHandler - .thumb_set QUADSPI_IRQHandler,Default_Handler - - .weak LPTIM1_IRQHandler - .thumb_set LPTIM1_IRQHandler,Default_Handler - - .weak CEC_IRQHandler - .thumb_set CEC_IRQHandler,Default_Handler - - .weak I2C4_EV_IRQHandler - .thumb_set I2C4_EV_IRQHandler,Default_Handler - - .weak I2C4_ER_IRQHandler - .thumb_set I2C4_ER_IRQHandler,Default_Handler - - .weak SPDIF_RX_IRQHandler - .thumb_set SPDIF_RX_IRQHandler,Default_Handler - - .weak DFSDM1_FLT0_IRQHandler - .thumb_set DFSDM1_FLT0_IRQHandler,Default_Handler - - .weak DFSDM1_FLT1_IRQHandler - .thumb_set DFSDM1_FLT1_IRQHandler,Default_Handler - - .weak DFSDM1_FLT2_IRQHandler - .thumb_set DFSDM1_FLT2_IRQHandler,Default_Handler - - .weak DFSDM1_FLT3_IRQHandler - .thumb_set DFSDM1_FLT3_IRQHandler,Default_Handler - - .weak SDMMC2_IRQHandler - .thumb_set SDMMC2_IRQHandler,Default_Handler - - .weak CAN3_TX_IRQHandler - .thumb_set CAN3_TX_IRQHandler,Default_Handler - - .weak CAN3_RX0_IRQHandler - .thumb_set CAN3_RX0_IRQHandler,Default_Handler - - .weak CAN3_RX1_IRQHandler - .thumb_set CAN3_RX1_IRQHandler,Default_Handler - - .weak CAN3_SCE_IRQHandler - .thumb_set CAN3_SCE_IRQHandler,Default_Handler - - .weak JPEG_IRQHandler - .thumb_set JPEG_IRQHandler,Default_Handler - - .weak MDIOS_IRQHandler - .thumb_set MDIOS_IRQHandler,Default_Handler - -/************************ (C) COPYRIGHT STMicroelectronics *****END OF FILE****/ - diff --git a/test_dma/Drivers/CMSIS/Device/ST/STM32F7xx/Include/stm32f767xx.h b/test_dma/Drivers/CMSIS/Device/ST/STM32F7xx/Include/stm32f767xx.h deleted file mode 100644 index 7b979c3..0000000 --- a/test_dma/Drivers/CMSIS/Device/ST/STM32F7xx/Include/stm32f767xx.h +++ /dev/null @@ -1,18631 +0,0 @@ -/** - ****************************************************************************** - * @file stm32f767xx.h - * @author MCD Application Team - * @brief CMSIS Cortex-M7 Device Peripheral Access Layer Header File. - * - * This file contains: - * - Data structures and the address mapping for all peripherals - * - Peripheral's registers declarations and bits definition - * - Macros to access peripheralÂ’s registers hardware - * - ****************************************************************************** - * @attention - * - *

© COPYRIGHT(c) 2016 STMicroelectronics

- * - * Redistribution and use in source and binary forms, with or without modification, - * are permitted provided that the following conditions are met: - * 1. Redistributions of source code must retain the above copyright notice, - * this list of conditions and the following disclaimer. - * 2. Redistributions in binary form must reproduce the above copyright notice, - * this list of conditions and the following disclaimer in the documentation - * and/or other materials provided with the distribution. - * 3. Neither the name of STMicroelectronics nor the names of its contributors - * may be used to endorse or promote products derived from this software - * without specific prior written permission. - * - * THIS SOFTWARE IS PROVIDED BY THE COPYRIGHT HOLDERS AND CONTRIBUTORS "AS IS" - * AND ANY EXPRESS OR IMPLIED WARRANTIES, INCLUDING, BUT NOT LIMITED TO, THE - * IMPLIED WARRANTIES OF MERCHANTABILITY AND FITNESS FOR A PARTICULAR PURPOSE ARE - * DISCLAIMED. IN NO EVENT SHALL THE COPYRIGHT HOLDER OR CONTRIBUTORS BE LIABLE - * FOR ANY DIRECT, INDIRECT, INCIDENTAL, SPECIAL, EXEMPLARY, OR CONSEQUENTIAL - * DAMAGES (INCLUDING, BUT NOT LIMITED TO, PROCUREMENT OF SUBSTITUTE GOODS OR - * SERVICES; LOSS OF USE, DATA, OR PROFITS; OR BUSINESS INTERRUPTION) HOWEVER - * CAUSED AND ON ANY THEORY OF LIABILITY, WHETHER IN CONTRACT, STRICT LIABILITY, - * OR TORT (INCLUDING NEGLIGENCE OR OTHERWISE) ARISING IN ANY WAY OUT OF THE USE - * OF THIS SOFTWARE, EVEN IF ADVISED OF THE POSSIBILITY OF SUCH DAMAGE. - * - ****************************************************************************** - */ - -/** @addtogroup CMSIS_Device - * @{ - */ - -/** @addtogroup stm32f767xx - * @{ - */ - -#ifndef __STM32F767xx_H -#define __STM32F767xx_H - -#ifdef __cplusplus - extern "C" { -#endif /* __cplusplus */ - -/** @addtogroup Configuration_section_for_CMSIS - * @{ - */ - -/** - * @brief STM32F7xx Interrupt Number Definition, according to the selected device - * in @ref Library_configuration_section - */ -typedef enum -{ -/****** Cortex-M7 Processor Exceptions Numbers ****************************************************************/ - NonMaskableInt_IRQn = -14, /*!< 2 Non Maskable Interrupt */ - MemoryManagement_IRQn = -12, /*!< 4 Cortex-M7 Memory Management Interrupt */ - BusFault_IRQn = -11, /*!< 5 Cortex-M7 Bus Fault Interrupt */ - UsageFault_IRQn = -10, /*!< 6 Cortex-M7 Usage Fault Interrupt */ - SVCall_IRQn = -5, /*!< 11 Cortex-M7 SV Call Interrupt */ - DebugMonitor_IRQn = -4, /*!< 12 Cortex-M7 Debug Monitor Interrupt */ - PendSV_IRQn = -2, /*!< 14 Cortex-M7 Pend SV Interrupt */ - SysTick_IRQn = -1, /*!< 15 Cortex-M7 System Tick Interrupt */ -/****** STM32 specific Interrupt Numbers **********************************************************************/ - WWDG_IRQn = 0, /*!< Window WatchDog Interrupt */ - PVD_IRQn = 1, /*!< PVD through EXTI Line detection Interrupt */ - TAMP_STAMP_IRQn = 2, /*!< Tamper and TimeStamp interrupts through the EXTI line */ - RTC_WKUP_IRQn = 3, /*!< RTC Wakeup interrupt through the EXTI line */ - FLASH_IRQn = 4, /*!< FLASH global Interrupt */ - RCC_IRQn = 5, /*!< RCC global Interrupt */ - EXTI0_IRQn = 6, /*!< EXTI Line0 Interrupt */ - EXTI1_IRQn = 7, /*!< EXTI Line1 Interrupt */ - EXTI2_IRQn = 8, /*!< EXTI Line2 Interrupt */ - EXTI3_IRQn = 9, /*!< EXTI Line3 Interrupt */ - EXTI4_IRQn = 10, /*!< EXTI Line4 Interrupt */ - DMA1_Stream0_IRQn = 11, /*!< DMA1 Stream 0 global Interrupt */ - DMA1_Stream1_IRQn = 12, /*!< DMA1 Stream 1 global Interrupt */ - DMA1_Stream2_IRQn = 13, /*!< DMA1 Stream 2 global Interrupt */ - DMA1_Stream3_IRQn = 14, /*!< DMA1 Stream 3 global Interrupt */ - DMA1_Stream4_IRQn = 15, /*!< DMA1 Stream 4 global Interrupt */ - DMA1_Stream5_IRQn = 16, /*!< DMA1 Stream 5 global Interrupt */ - DMA1_Stream6_IRQn = 17, /*!< DMA1 Stream 6 global Interrupt */ - ADC_IRQn = 18, /*!< ADC1, ADC2 and ADC3 global Interrupts */ - CAN1_TX_IRQn = 19, /*!< CAN1 TX Interrupt */ - CAN1_RX0_IRQn = 20, /*!< CAN1 RX0 Interrupt */ - CAN1_RX1_IRQn = 21, /*!< CAN1 RX1 Interrupt */ - CAN1_SCE_IRQn = 22, /*!< CAN1 SCE Interrupt */ - EXTI9_5_IRQn = 23, /*!< External Line[9:5] Interrupts */ - TIM1_BRK_TIM9_IRQn = 24, /*!< TIM1 Break interrupt and TIM9 global interrupt */ - TIM1_UP_TIM10_IRQn = 25, /*!< TIM1 Update Interrupt and TIM10 global interrupt */ - TIM1_TRG_COM_TIM11_IRQn = 26, /*!< TIM1 Trigger and Commutation Interrupt and TIM11 global interrupt */ - TIM1_CC_IRQn = 27, /*!< TIM1 Capture Compare Interrupt */ - TIM2_IRQn = 28, /*!< TIM2 global Interrupt */ - TIM3_IRQn = 29, /*!< TIM3 global Interrupt */ - TIM4_IRQn = 30, /*!< TIM4 global Interrupt */ - I2C1_EV_IRQn = 31, /*!< I2C1 Event Interrupt */ - I2C1_ER_IRQn = 32, /*!< I2C1 Error Interrupt */ - I2C2_EV_IRQn = 33, /*!< I2C2 Event Interrupt */ - I2C2_ER_IRQn = 34, /*!< I2C2 Error Interrupt */ - SPI1_IRQn = 35, /*!< SPI1 global Interrupt */ - SPI2_IRQn = 36, /*!< SPI2 global Interrupt */ - USART1_IRQn = 37, /*!< USART1 global Interrupt */ - USART2_IRQn = 38, /*!< USART2 global Interrupt */ - USART3_IRQn = 39, /*!< USART3 global Interrupt */ - EXTI15_10_IRQn = 40, /*!< External Line[15:10] Interrupts */ - RTC_Alarm_IRQn = 41, /*!< RTC Alarm (A and B) through EXTI Line Interrupt */ - OTG_FS_WKUP_IRQn = 42, /*!< USB OTG FS Wakeup through EXTI line interrupt */ - TIM8_BRK_TIM12_IRQn = 43, /*!< TIM8 Break Interrupt and TIM12 global interrupt */ - TIM8_UP_TIM13_IRQn = 44, /*!< TIM8 Update Interrupt and TIM13 global interrupt */ - TIM8_TRG_COM_TIM14_IRQn = 45, /*!< TIM8 Trigger and Commutation Interrupt and TIM14 global interrupt */ - TIM8_CC_IRQn = 46, /*!< TIM8 Capture Compare Interrupt */ - DMA1_Stream7_IRQn = 47, /*!< DMA1 Stream7 Interrupt */ - FMC_IRQn = 48, /*!< FMC global Interrupt */ - SDMMC1_IRQn = 49, /*!< SDMMC1 global Interrupt */ - TIM5_IRQn = 50, /*!< TIM5 global Interrupt */ - SPI3_IRQn = 51, /*!< SPI3 global Interrupt */ - UART4_IRQn = 52, /*!< UART4 global Interrupt */ - UART5_IRQn = 53, /*!< UART5 global Interrupt */ - TIM6_DAC_IRQn = 54, /*!< TIM6 global and DAC1&2 underrun error interrupts */ - TIM7_IRQn = 55, /*!< TIM7 global interrupt */ - DMA2_Stream0_IRQn = 56, /*!< DMA2 Stream 0 global Interrupt */ - DMA2_Stream1_IRQn = 57, /*!< DMA2 Stream 1 global Interrupt */ - DMA2_Stream2_IRQn = 58, /*!< DMA2 Stream 2 global Interrupt */ - DMA2_Stream3_IRQn = 59, /*!< DMA2 Stream 3 global Interrupt */ - DMA2_Stream4_IRQn = 60, /*!< DMA2 Stream 4 global Interrupt */ - ETH_IRQn = 61, /*!< Ethernet global Interrupt */ - ETH_WKUP_IRQn = 62, /*!< Ethernet Wakeup through EXTI line Interrupt */ - CAN2_TX_IRQn = 63, /*!< CAN2 TX Interrupt */ - CAN2_RX0_IRQn = 64, /*!< CAN2 RX0 Interrupt */ - CAN2_RX1_IRQn = 65, /*!< CAN2 RX1 Interrupt */ - CAN2_SCE_IRQn = 66, /*!< CAN2 SCE Interrupt */ - OTG_FS_IRQn = 67, /*!< USB OTG FS global Interrupt */ - DMA2_Stream5_IRQn = 68, /*!< DMA2 Stream 5 global interrupt */ - DMA2_Stream6_IRQn = 69, /*!< DMA2 Stream 6 global interrupt */ - DMA2_Stream7_IRQn = 70, /*!< DMA2 Stream 7 global interrupt */ - USART6_IRQn = 71, /*!< USART6 global interrupt */ - I2C3_EV_IRQn = 72, /*!< I2C3 event interrupt */ - I2C3_ER_IRQn = 73, /*!< I2C3 error interrupt */ - OTG_HS_EP1_OUT_IRQn = 74, /*!< USB OTG HS End Point 1 Out global interrupt */ - OTG_HS_EP1_IN_IRQn = 75, /*!< USB OTG HS End Point 1 In global interrupt */ - OTG_HS_WKUP_IRQn = 76, /*!< USB OTG HS Wakeup through EXTI interrupt */ - OTG_HS_IRQn = 77, /*!< USB OTG HS global interrupt */ - DCMI_IRQn = 78, /*!< DCMI global interrupt */ - RNG_IRQn = 80, /*!< RNG global interrupt */ - FPU_IRQn = 81, /*!< FPU global interrupt */ - UART7_IRQn = 82, /*!< UART7 global interrupt */ - UART8_IRQn = 83, /*!< UART8 global interrupt */ - SPI4_IRQn = 84, /*!< SPI4 global Interrupt */ - SPI5_IRQn = 85, /*!< SPI5 global Interrupt */ - SPI6_IRQn = 86, /*!< SPI6 global Interrupt */ - SAI1_IRQn = 87, /*!< SAI1 global Interrupt */ - LTDC_IRQn = 88, /*!< LTDC global Interrupt */ - LTDC_ER_IRQn = 89, /*!< LTDC Error global Interrupt */ - DMA2D_IRQn = 90, /*!< DMA2D global Interrupt */ - SAI2_IRQn = 91, /*!< SAI2 global Interrupt */ - QUADSPI_IRQn = 92, /*!< Quad SPI global interrupt */ - LPTIM1_IRQn = 93, /*!< LP TIM1 interrupt */ - CEC_IRQn = 94, /*!< HDMI-CEC global Interrupt */ - I2C4_EV_IRQn = 95, /*!< I2C4 Event Interrupt */ - I2C4_ER_IRQn = 96, /*!< I2C4 Error Interrupt */ - SPDIF_RX_IRQn = 97, /*!< SPDIF-RX global Interrupt */ - DFSDM1_FLT0_IRQn = 99, /*!< DFSDM1 Filter 0 global Interrupt */ - DFSDM1_FLT1_IRQn = 100, /*!< DFSDM1 Filter 1 global Interrupt */ - DFSDM1_FLT2_IRQn = 101, /*!< DFSDM1 Filter 2 global Interrupt */ - DFSDM1_FLT3_IRQn = 102, /*!< DFSDM1 Filter 3 global Interrupt */ - SDMMC2_IRQn = 103, /*!< SDMMC2 global Interrupt */ - CAN3_TX_IRQn = 104, /*!< CAN3 TX Interrupt */ - CAN3_RX0_IRQn = 105, /*!< CAN3 RX0 Interrupt */ - CAN3_RX1_IRQn = 106, /*!< CAN3 RX1 Interrupt */ - CAN3_SCE_IRQn = 107, /*!< CAN3 SCE Interrupt */ - JPEG_IRQn = 108, /*!< JPEG global Interrupt */ - MDIOS_IRQn = 109 /*!< MDIO Slave global Interrupt */ -} IRQn_Type; - -/** - * @} - */ - -/** - * @brief Configuration of the Cortex-M7 Processor and Core Peripherals - */ -#define __CM7_REV 0x0100U /*!< Cortex-M7 revision r1p0 */ -#define __MPU_PRESENT 1 /*!< CM7 provides an MPU */ -#define __NVIC_PRIO_BITS 4 /*!< CM7 uses 4 Bits for the Priority Levels */ -#define __Vendor_SysTickConfig 0 /*!< Set to 1 if different SysTick Config is used */ -#define __FPU_PRESENT 1 /*!< FPU present */ -#define __ICACHE_PRESENT 1 /*!< CM7 instruction cache present */ -#define __DCACHE_PRESENT 1 /*!< CM7 data cache present */ -#include "core_cm7.h" /*!< Cortex-M7 processor and core peripherals */ - - -#include "system_stm32f7xx.h" -#include - -/** @addtogroup Peripheral_registers_structures - * @{ - */ - -/** - * @brief Analog to Digital Converter - */ - -typedef struct -{ - __IO uint32_t SR; /*!< ADC status register, Address offset: 0x00 */ - __IO uint32_t CR1; /*!< ADC control register 1, Address offset: 0x04 */ - __IO uint32_t CR2; /*!< ADC control register 2, Address offset: 0x08 */ - __IO uint32_t SMPR1; /*!< ADC sample time register 1, Address offset: 0x0C */ - __IO uint32_t SMPR2; /*!< ADC sample time register 2, Address offset: 0x10 */ - __IO uint32_t JOFR1; /*!< ADC injected channel data offset register 1, Address offset: 0x14 */ - __IO uint32_t JOFR2; /*!< ADC injected channel data offset register 2, Address offset: 0x18 */ - __IO uint32_t JOFR3; /*!< ADC injected channel data offset register 3, Address offset: 0x1C */ - __IO uint32_t JOFR4; /*!< ADC injected channel data offset register 4, Address offset: 0x20 */ - __IO uint32_t HTR; /*!< ADC watchdog higher threshold register, Address offset: 0x24 */ - __IO uint32_t LTR; /*!< ADC watchdog lower threshold register, Address offset: 0x28 */ - __IO uint32_t SQR1; /*!< ADC regular sequence register 1, Address offset: 0x2C */ - __IO uint32_t SQR2; /*!< ADC regular sequence register 2, Address offset: 0x30 */ - __IO uint32_t SQR3; /*!< ADC regular sequence register 3, Address offset: 0x34 */ - __IO uint32_t JSQR; /*!< ADC injected sequence register, Address offset: 0x38*/ - __IO uint32_t JDR1; /*!< ADC injected data register 1, Address offset: 0x3C */ - __IO uint32_t JDR2; /*!< ADC injected data register 2, Address offset: 0x40 */ - __IO uint32_t JDR3; /*!< ADC injected data register 3, Address offset: 0x44 */ - __IO uint32_t JDR4; /*!< ADC injected data register 4, Address offset: 0x48 */ - __IO uint32_t DR; /*!< ADC regular data register, Address offset: 0x4C */ -} ADC_TypeDef; - -typedef struct -{ - __IO uint32_t CSR; /*!< ADC Common status register, Address offset: ADC1 base address + 0x300 */ - __IO uint32_t CCR; /*!< ADC common control register, Address offset: ADC1 base address + 0x304 */ - __IO uint32_t CDR; /*!< ADC common regular data register for dual - AND triple modes, Address offset: ADC1 base address + 0x308 */ -} ADC_Common_TypeDef; - - -/** - * @brief Controller Area Network TxMailBox - */ - -typedef struct -{ - __IO uint32_t TIR; /*!< CAN TX mailbox identifier register */ - __IO uint32_t TDTR; /*!< CAN mailbox data length control and time stamp register */ - __IO uint32_t TDLR; /*!< CAN mailbox data low register */ - __IO uint32_t TDHR; /*!< CAN mailbox data high register */ -} CAN_TxMailBox_TypeDef; - -/** - * @brief Controller Area Network FIFOMailBox - */ - -typedef struct -{ - __IO uint32_t RIR; /*!< CAN receive FIFO mailbox identifier register */ - __IO uint32_t RDTR; /*!< CAN receive FIFO mailbox data length control and time stamp register */ - __IO uint32_t RDLR; /*!< CAN receive FIFO mailbox data low register */ - __IO uint32_t RDHR; /*!< CAN receive FIFO mailbox data high register */ -} CAN_FIFOMailBox_TypeDef; - -/** - * @brief Controller Area Network FilterRegister - */ - -typedef struct -{ - __IO uint32_t FR1; /*!< CAN Filter bank register 1 */ - __IO uint32_t FR2; /*!< CAN Filter bank register 1 */ -} CAN_FilterRegister_TypeDef; - -/** - * @brief Controller Area Network - */ - -typedef struct -{ - __IO uint32_t MCR; /*!< CAN master control register, Address offset: 0x00 */ - __IO uint32_t MSR; /*!< CAN master status register, Address offset: 0x04 */ - __IO uint32_t TSR; /*!< CAN transmit status register, Address offset: 0x08 */ - __IO uint32_t RF0R; /*!< CAN receive FIFO 0 register, Address offset: 0x0C */ - __IO uint32_t RF1R; /*!< CAN receive FIFO 1 register, Address offset: 0x10 */ - __IO uint32_t IER; /*!< CAN interrupt enable register, Address offset: 0x14 */ - __IO uint32_t ESR; /*!< CAN error status register, Address offset: 0x18 */ - __IO uint32_t BTR; /*!< CAN bit timing register, Address offset: 0x1C */ - uint32_t RESERVED0[88]; /*!< Reserved, 0x020 - 0x17F */ - CAN_TxMailBox_TypeDef sTxMailBox[3]; /*!< CAN Tx MailBox, Address offset: 0x180 - 0x1AC */ - CAN_FIFOMailBox_TypeDef sFIFOMailBox[2]; /*!< CAN FIFO MailBox, Address offset: 0x1B0 - 0x1CC */ - uint32_t RESERVED1[12]; /*!< Reserved, 0x1D0 - 0x1FF */ - __IO uint32_t FMR; /*!< CAN filter master register, Address offset: 0x200 */ - __IO uint32_t FM1R; /*!< CAN filter mode register, Address offset: 0x204 */ - uint32_t RESERVED2; /*!< Reserved, 0x208 */ - __IO uint32_t FS1R; /*!< CAN filter scale register, Address offset: 0x20C */ - uint32_t RESERVED3; /*!< Reserved, 0x210 */ - __IO uint32_t FFA1R; /*!< CAN filter FIFO assignment register, Address offset: 0x214 */ - uint32_t RESERVED4; /*!< Reserved, 0x218 */ - __IO uint32_t FA1R; /*!< CAN filter activation register, Address offset: 0x21C */ - uint32_t RESERVED5[8]; /*!< Reserved, 0x220-0x23F */ - CAN_FilterRegister_TypeDef sFilterRegister[28]; /*!< CAN Filter Register, Address offset: 0x240-0x31C */ -} CAN_TypeDef; - -/** - * @brief HDMI-CEC - */ - -typedef struct -{ - __IO uint32_t CR; /*!< CEC control register, Address offset:0x00 */ - __IO uint32_t CFGR; /*!< CEC configuration register, Address offset:0x04 */ - __IO uint32_t TXDR; /*!< CEC Tx data register , Address offset:0x08 */ - __IO uint32_t RXDR; /*!< CEC Rx Data Register, Address offset:0x0C */ - __IO uint32_t ISR; /*!< CEC Interrupt and Status Register, Address offset:0x10 */ - __IO uint32_t IER; /*!< CEC interrupt enable register, Address offset:0x14 */ -}CEC_TypeDef; - -/** - * @brief CRC calculation unit - */ - -typedef struct -{ - __IO uint32_t DR; /*!< CRC Data register, Address offset: 0x00 */ - __IO uint8_t IDR; /*!< CRC Independent data register, Address offset: 0x04 */ - uint8_t RESERVED0; /*!< Reserved, 0x05 */ - uint16_t RESERVED1; /*!< Reserved, 0x06 */ - __IO uint32_t CR; /*!< CRC Control register, Address offset: 0x08 */ - uint32_t RESERVED2; /*!< Reserved, 0x0C */ - __IO uint32_t INIT; /*!< Initial CRC value register, Address offset: 0x10 */ - __IO uint32_t POL; /*!< CRC polynomial register, Address offset: 0x14 */ -} CRC_TypeDef; - -/** - * @brief Digital to Analog Converter - */ - -typedef struct -{ - __IO uint32_t CR; /*!< DAC control register, Address offset: 0x00 */ - __IO uint32_t SWTRIGR; /*!< DAC software trigger register, Address offset: 0x04 */ - __IO uint32_t DHR12R1; /*!< DAC channel1 12-bit right-aligned data holding register, Address offset: 0x08 */ - __IO uint32_t DHR12L1; /*!< DAC channel1 12-bit left aligned data holding register, Address offset: 0x0C */ - __IO uint32_t DHR8R1; /*!< DAC channel1 8-bit right aligned data holding register, Address offset: 0x10 */ - __IO uint32_t DHR12R2; /*!< DAC channel2 12-bit right aligned data holding register, Address offset: 0x14 */ - __IO uint32_t DHR12L2; /*!< DAC channel2 12-bit left aligned data holding register, Address offset: 0x18 */ - __IO uint32_t DHR8R2; /*!< DAC channel2 8-bit right-aligned data holding register, Address offset: 0x1C */ - __IO uint32_t DHR12RD; /*!< Dual DAC 12-bit right-aligned data holding register, Address offset: 0x20 */ - __IO uint32_t DHR12LD; /*!< DUAL DAC 12-bit left aligned data holding register, Address offset: 0x24 */ - __IO uint32_t DHR8RD; /*!< DUAL DAC 8-bit right aligned data holding register, Address offset: 0x28 */ - __IO uint32_t DOR1; /*!< DAC channel1 data output register, Address offset: 0x2C */ - __IO uint32_t DOR2; /*!< DAC channel2 data output register, Address offset: 0x30 */ - __IO uint32_t SR; /*!< DAC status register, Address offset: 0x34 */ -} DAC_TypeDef; - -/** - * @brief DFSDM module registers - */ -typedef struct -{ - __IO uint32_t FLTCR1; /*!< DFSDM control register1, Address offset: 0x100 */ - __IO uint32_t FLTCR2; /*!< DFSDM control register2, Address offset: 0x104 */ - __IO uint32_t FLTISR; /*!< DFSDM interrupt and status register, Address offset: 0x108 */ - __IO uint32_t FLTICR; /*!< DFSDM interrupt flag clear register, Address offset: 0x10C */ - __IO uint32_t FLTJCHGR; /*!< DFSDM injected channel group selection register, Address offset: 0x110 */ - __IO uint32_t FLTFCR; /*!< DFSDM filter control register, Address offset: 0x114 */ - __IO uint32_t FLTJDATAR; /*!< DFSDM data register for injected group, Address offset: 0x118 */ - __IO uint32_t FLTRDATAR; /*!< DFSDM data register for regular group, Address offset: 0x11C */ - __IO uint32_t FLTAWHTR; /*!< DFSDM analog watchdog high threshold register, Address offset: 0x120 */ - __IO uint32_t FLTAWLTR; /*!< DFSDM analog watchdog low threshold register, Address offset: 0x124 */ - __IO uint32_t FLTAWSR; /*!< DFSDM analog watchdog status register Address offset: 0x128 */ - __IO uint32_t FLTAWCFR; /*!< DFSDM analog watchdog clear flag register Address offset: 0x12C */ - __IO uint32_t FLTEXMAX; /*!< DFSDM extreme detector maximum register, Address offset: 0x130 */ - __IO uint32_t FLTEXMIN; /*!< DFSDM extreme detector minimum register Address offset: 0x134 */ - __IO uint32_t FLTCNVTIMR; /*!< DFSDM conversion timer, Address offset: 0x138 */ -} DFSDM_Filter_TypeDef; - -/** - * @brief DFSDM channel configuration registers - */ -typedef struct -{ - __IO uint32_t CHCFGR1; /*!< DFSDM channel configuration register1, Address offset: 0x00 */ - __IO uint32_t CHCFGR2; /*!< DFSDM channel configuration register2, Address offset: 0x04 */ - __IO uint32_t CHAWSCDR; /*!< DFSDM channel analog watchdog and - short circuit detector register, Address offset: 0x08 */ - __IO uint32_t CHWDATAR; /*!< DFSDM channel watchdog filter data register, Address offset: 0x0C */ - __IO uint32_t CHDATINR; /*!< DFSDM channel data input register, Address offset: 0x10 */ -} DFSDM_Channel_TypeDef; - -/** - * @brief Debug MCU - */ - -typedef struct -{ - __IO uint32_t IDCODE; /*!< MCU device ID code, Address offset: 0x00 */ - __IO uint32_t CR; /*!< Debug MCU configuration register, Address offset: 0x04 */ - __IO uint32_t APB1FZ; /*!< Debug MCU APB1 freeze register, Address offset: 0x08 */ - __IO uint32_t APB2FZ; /*!< Debug MCU APB2 freeze register, Address offset: 0x0C */ -}DBGMCU_TypeDef; - -/** - * @brief DCMI - */ - -typedef struct -{ - __IO uint32_t CR; /*!< DCMI control register 1, Address offset: 0x00 */ - __IO uint32_t SR; /*!< DCMI status register, Address offset: 0x04 */ - __IO uint32_t RISR; /*!< DCMI raw interrupt status register, Address offset: 0x08 */ - __IO uint32_t IER; /*!< DCMI interrupt enable register, Address offset: 0x0C */ - __IO uint32_t MISR; /*!< DCMI masked interrupt status register, Address offset: 0x10 */ - __IO uint32_t ICR; /*!< DCMI interrupt clear register, Address offset: 0x14 */ - __IO uint32_t ESCR; /*!< DCMI embedded synchronization code register, Address offset: 0x18 */ - __IO uint32_t ESUR; /*!< DCMI embedded synchronization unmask register, Address offset: 0x1C */ - __IO uint32_t CWSTRTR; /*!< DCMI crop window start, Address offset: 0x20 */ - __IO uint32_t CWSIZER; /*!< DCMI crop window size, Address offset: 0x24 */ - __IO uint32_t DR; /*!< DCMI data register, Address offset: 0x28 */ -} DCMI_TypeDef; - -/** - * @brief DMA Controller - */ - -typedef struct -{ - __IO uint32_t CR; /*!< DMA stream x configuration register */ - __IO uint32_t NDTR; /*!< DMA stream x number of data register */ - __IO uint32_t PAR; /*!< DMA stream x peripheral address register */ - __IO uint32_t M0AR; /*!< DMA stream x memory 0 address register */ - __IO uint32_t M1AR; /*!< DMA stream x memory 1 address register */ - __IO uint32_t FCR; /*!< DMA stream x FIFO control register */ -} DMA_Stream_TypeDef; - -typedef struct -{ - __IO uint32_t LISR; /*!< DMA low interrupt status register, Address offset: 0x00 */ - __IO uint32_t HISR; /*!< DMA high interrupt status register, Address offset: 0x04 */ - __IO uint32_t LIFCR; /*!< DMA low interrupt flag clear register, Address offset: 0x08 */ - __IO uint32_t HIFCR; /*!< DMA high interrupt flag clear register, Address offset: 0x0C */ -} DMA_TypeDef; - -/** - * @brief DMA2D Controller - */ - -typedef struct -{ - __IO uint32_t CR; /*!< DMA2D Control Register, Address offset: 0x00 */ - __IO uint32_t ISR; /*!< DMA2D Interrupt Status Register, Address offset: 0x04 */ - __IO uint32_t IFCR; /*!< DMA2D Interrupt Flag Clear Register, Address offset: 0x08 */ - __IO uint32_t FGMAR; /*!< DMA2D Foreground Memory Address Register, Address offset: 0x0C */ - __IO uint32_t FGOR; /*!< DMA2D Foreground Offset Register, Address offset: 0x10 */ - __IO uint32_t BGMAR; /*!< DMA2D Background Memory Address Register, Address offset: 0x14 */ - __IO uint32_t BGOR; /*!< DMA2D Background Offset Register, Address offset: 0x18 */ - __IO uint32_t FGPFCCR; /*!< DMA2D Foreground PFC Control Register, Address offset: 0x1C */ - __IO uint32_t FGCOLR; /*!< DMA2D Foreground Color Register, Address offset: 0x20 */ - __IO uint32_t BGPFCCR; /*!< DMA2D Background PFC Control Register, Address offset: 0x24 */ - __IO uint32_t BGCOLR; /*!< DMA2D Background Color Register, Address offset: 0x28 */ - __IO uint32_t FGCMAR; /*!< DMA2D Foreground CLUT Memory Address Register, Address offset: 0x2C */ - __IO uint32_t BGCMAR; /*!< DMA2D Background CLUT Memory Address Register, Address offset: 0x30 */ - __IO uint32_t OPFCCR; /*!< DMA2D Output PFC Control Register, Address offset: 0x34 */ - __IO uint32_t OCOLR; /*!< DMA2D Output Color Register, Address offset: 0x38 */ - __IO uint32_t OMAR; /*!< DMA2D Output Memory Address Register, Address offset: 0x3C */ - __IO uint32_t OOR; /*!< DMA2D Output Offset Register, Address offset: 0x40 */ - __IO uint32_t NLR; /*!< DMA2D Number of Line Register, Address offset: 0x44 */ - __IO uint32_t LWR; /*!< DMA2D Line Watermark Register, Address offset: 0x48 */ - __IO uint32_t AMTCR; /*!< DMA2D AHB Master Timer Configuration Register, Address offset: 0x4C */ - uint32_t RESERVED[236]; /*!< Reserved, 0x50-0x3FF */ - __IO uint32_t FGCLUT[256]; /*!< DMA2D Foreground CLUT, Address offset:400-7FF */ - __IO uint32_t BGCLUT[256]; /*!< DMA2D Background CLUT, Address offset:800-BFF */ -} DMA2D_TypeDef; - - -/** - * @brief Ethernet MAC - */ - -typedef struct -{ - __IO uint32_t MACCR; - __IO uint32_t MACFFR; - __IO uint32_t MACHTHR; - __IO uint32_t MACHTLR; - __IO uint32_t MACMIIAR; - __IO uint32_t MACMIIDR; - __IO uint32_t MACFCR; - __IO uint32_t MACVLANTR; /* 8 */ - uint32_t RESERVED0[2]; - __IO uint32_t MACRWUFFR; /* 11 */ - __IO uint32_t MACPMTCSR; - uint32_t RESERVED1; - __IO uint32_t MACDBGR; - __IO uint32_t MACSR; /* 15 */ - __IO uint32_t MACIMR; - __IO uint32_t MACA0HR; - __IO uint32_t MACA0LR; - __IO uint32_t MACA1HR; - __IO uint32_t MACA1LR; - __IO uint32_t MACA2HR; - __IO uint32_t MACA2LR; - __IO uint32_t MACA3HR; - __IO uint32_t MACA3LR; /* 24 */ - uint32_t RESERVED2[40]; - __IO uint32_t MMCCR; /* 65 */ - __IO uint32_t MMCRIR; - __IO uint32_t MMCTIR; - __IO uint32_t MMCRIMR; - __IO uint32_t MMCTIMR; /* 69 */ - uint32_t RESERVED3[14]; - __IO uint32_t MMCTGFSCCR; /* 84 */ - __IO uint32_t MMCTGFMSCCR; - uint32_t RESERVED4[5]; - __IO uint32_t MMCTGFCR; - uint32_t RESERVED5[10]; - __IO uint32_t MMCRFCECR; - __IO uint32_t MMCRFAECR; - uint32_t RESERVED6[10]; - __IO uint32_t MMCRGUFCR; - uint32_t RESERVED7[334]; - __IO uint32_t PTPTSCR; - __IO uint32_t PTPSSIR; - __IO uint32_t PTPTSHR; - __IO uint32_t PTPTSLR; - __IO uint32_t PTPTSHUR; - __IO uint32_t PTPTSLUR; - __IO uint32_t PTPTSAR; - __IO uint32_t PTPTTHR; - __IO uint32_t PTPTTLR; - __IO uint32_t RESERVED8; - __IO uint32_t PTPTSSR; - uint32_t RESERVED9[565]; - __IO uint32_t DMABMR; - __IO uint32_t DMATPDR; - __IO uint32_t DMARPDR; - __IO uint32_t DMARDLAR; - __IO uint32_t DMATDLAR; - __IO uint32_t DMASR; - __IO uint32_t DMAOMR; - __IO uint32_t DMAIER; - __IO uint32_t DMAMFBOCR; - __IO uint32_t DMARSWTR; - uint32_t RESERVED10[8]; - __IO uint32_t DMACHTDR; - __IO uint32_t DMACHRDR; - __IO uint32_t DMACHTBAR; - __IO uint32_t DMACHRBAR; -} ETH_TypeDef; - -/** - * @brief External Interrupt/Event Controller - */ - -typedef struct -{ - __IO uint32_t IMR; /*!< EXTI Interrupt mask register, Address offset: 0x00 */ - __IO uint32_t EMR; /*!< EXTI Event mask register, Address offset: 0x04 */ - __IO uint32_t RTSR; /*!< EXTI Rising trigger selection register, Address offset: 0x08 */ - __IO uint32_t FTSR; /*!< EXTI Falling trigger selection register, Address offset: 0x0C */ - __IO uint32_t SWIER; /*!< EXTI Software interrupt event register, Address offset: 0x10 */ - __IO uint32_t PR; /*!< EXTI Pending register, Address offset: 0x14 */ -} EXTI_TypeDef; - -/** - * @brief FLASH Registers - */ - -typedef struct -{ - __IO uint32_t ACR; /*!< FLASH access control register, Address offset: 0x00 */ - __IO uint32_t KEYR; /*!< FLASH key register, Address offset: 0x04 */ - __IO uint32_t OPTKEYR; /*!< FLASH option key register, Address offset: 0x08 */ - __IO uint32_t SR; /*!< FLASH status register, Address offset: 0x0C */ - __IO uint32_t CR; /*!< FLASH control register, Address offset: 0x10 */ - __IO uint32_t OPTCR; /*!< FLASH option control register , Address offset: 0x14 */ - __IO uint32_t OPTCR1; /*!< FLASH option control register 1 , Address offset: 0x18 */ -} FLASH_TypeDef; - - - -/** - * @brief Flexible Memory Controller - */ - -typedef struct -{ - __IO uint32_t BTCR[8]; /*!< NOR/PSRAM chip-select control register(BCR) and chip-select timing register(BTR), Address offset: 0x00-1C */ -} FMC_Bank1_TypeDef; - -/** - * @brief Flexible Memory Controller Bank1E - */ - -typedef struct -{ - __IO uint32_t BWTR[7]; /*!< NOR/PSRAM write timing registers, Address offset: 0x104-0x11C */ -} FMC_Bank1E_TypeDef; - -/** - * @brief Flexible Memory Controller Bank3 - */ - -typedef struct -{ - __IO uint32_t PCR; /*!< NAND Flash control register, Address offset: 0x80 */ - __IO uint32_t SR; /*!< NAND Flash FIFO status and interrupt register, Address offset: 0x84 */ - __IO uint32_t PMEM; /*!< NAND Flash Common memory space timing register, Address offset: 0x88 */ - __IO uint32_t PATT; /*!< NAND Flash Attribute memory space timing register, Address offset: 0x8C */ - uint32_t RESERVED0; /*!< Reserved, 0x90 */ - __IO uint32_t ECCR; /*!< NAND Flash ECC result registers, Address offset: 0x94 */ -} FMC_Bank3_TypeDef; - -/** - * @brief Flexible Memory Controller Bank5_6 - */ - -typedef struct -{ - __IO uint32_t SDCR[2]; /*!< SDRAM Control registers , Address offset: 0x140-0x144 */ - __IO uint32_t SDTR[2]; /*!< SDRAM Timing registers , Address offset: 0x148-0x14C */ - __IO uint32_t SDCMR; /*!< SDRAM Command Mode register, Address offset: 0x150 */ - __IO uint32_t SDRTR; /*!< SDRAM Refresh Timer register, Address offset: 0x154 */ - __IO uint32_t SDSR; /*!< SDRAM Status register, Address offset: 0x158 */ -} FMC_Bank5_6_TypeDef; - - -/** - * @brief General Purpose I/O - */ - -typedef struct -{ - __IO uint32_t MODER; /*!< GPIO port mode register, Address offset: 0x00 */ - __IO uint32_t OTYPER; /*!< GPIO port output type register, Address offset: 0x04 */ - __IO uint32_t OSPEEDR; /*!< GPIO port output speed register, Address offset: 0x08 */ - __IO uint32_t PUPDR; /*!< GPIO port pull-up/pull-down register, Address offset: 0x0C */ - __IO uint32_t IDR; /*!< GPIO port input data register, Address offset: 0x10 */ - __IO uint32_t ODR; /*!< GPIO port output data register, Address offset: 0x14 */ - __IO uint32_t BSRR; /*!< GPIO port bit set/reset register, Address offset: 0x18 */ - __IO uint32_t LCKR; /*!< GPIO port configuration lock register, Address offset: 0x1C */ - __IO uint32_t AFR[2]; /*!< GPIO alternate function registers, Address offset: 0x20-0x24 */ -} GPIO_TypeDef; - -/** - * @brief System configuration controller - */ - -typedef struct -{ - __IO uint32_t MEMRMP; /*!< SYSCFG memory remap register, Address offset: 0x00 */ - __IO uint32_t PMC; /*!< SYSCFG peripheral mode configuration register, Address offset: 0x04 */ - __IO uint32_t EXTICR[4]; /*!< SYSCFG external interrupt configuration registers, Address offset: 0x08-0x14 */ - uint32_t RESERVED; /*!< Reserved, 0x18 */ - __IO uint32_t CBR; /*!< SYSCFG Class B register, Address offset: 0x1C */ - __IO uint32_t CMPCR; /*!< SYSCFG Compensation cell control register, Address offset: 0x20 */ -} SYSCFG_TypeDef; - -/** - * @brief Inter-integrated Circuit Interface - */ - -typedef struct -{ - __IO uint32_t CR1; /*!< I2C Control register 1, Address offset: 0x00 */ - __IO uint32_t CR2; /*!< I2C Control register 2, Address offset: 0x04 */ - __IO uint32_t OAR1; /*!< I2C Own address 1 register, Address offset: 0x08 */ - __IO uint32_t OAR2; /*!< I2C Own address 2 register, Address offset: 0x0C */ - __IO uint32_t TIMINGR; /*!< I2C Timing register, Address offset: 0x10 */ - __IO uint32_t TIMEOUTR; /*!< I2C Timeout register, Address offset: 0x14 */ - __IO uint32_t ISR; /*!< I2C Interrupt and status register, Address offset: 0x18 */ - __IO uint32_t ICR; /*!< I2C Interrupt clear register, Address offset: 0x1C */ - __IO uint32_t PECR; /*!< I2C PEC register, Address offset: 0x20 */ - __IO uint32_t RXDR; /*!< I2C Receive data register, Address offset: 0x24 */ - __IO uint32_t TXDR; /*!< I2C Transmit data register, Address offset: 0x28 */ -} I2C_TypeDef; - -/** - * @brief Independent WATCHDOG - */ - -typedef struct -{ - __IO uint32_t KR; /*!< IWDG Key register, Address offset: 0x00 */ - __IO uint32_t PR; /*!< IWDG Prescaler register, Address offset: 0x04 */ - __IO uint32_t RLR; /*!< IWDG Reload register, Address offset: 0x08 */ - __IO uint32_t SR; /*!< IWDG Status register, Address offset: 0x0C */ - __IO uint32_t WINR; /*!< IWDG Window register, Address offset: 0x10 */ -} IWDG_TypeDef; - - -/** - * @brief LCD-TFT Display Controller - */ - -typedef struct -{ - uint32_t RESERVED0[2]; /*!< Reserved, 0x00-0x04 */ - __IO uint32_t SSCR; /*!< LTDC Synchronization Size Configuration Register, Address offset: 0x08 */ - __IO uint32_t BPCR; /*!< LTDC Back Porch Configuration Register, Address offset: 0x0C */ - __IO uint32_t AWCR; /*!< LTDC Active Width Configuration Register, Address offset: 0x10 */ - __IO uint32_t TWCR; /*!< LTDC Total Width Configuration Register, Address offset: 0x14 */ - __IO uint32_t GCR; /*!< LTDC Global Control Register, Address offset: 0x18 */ - uint32_t RESERVED1[2]; /*!< Reserved, 0x1C-0x20 */ - __IO uint32_t SRCR; /*!< LTDC Shadow Reload Configuration Register, Address offset: 0x24 */ - uint32_t RESERVED2[1]; /*!< Reserved, 0x28 */ - __IO uint32_t BCCR; /*!< LTDC Background Color Configuration Register, Address offset: 0x2C */ - uint32_t RESERVED3[1]; /*!< Reserved, 0x30 */ - __IO uint32_t IER; /*!< LTDC Interrupt Enable Register, Address offset: 0x34 */ - __IO uint32_t ISR; /*!< LTDC Interrupt Status Register, Address offset: 0x38 */ - __IO uint32_t ICR; /*!< LTDC Interrupt Clear Register, Address offset: 0x3C */ - __IO uint32_t LIPCR; /*!< LTDC Line Interrupt Position Configuration Register, Address offset: 0x40 */ - __IO uint32_t CPSR; /*!< LTDC Current Position Status Register, Address offset: 0x44 */ - __IO uint32_t CDSR; /*!< LTDC Current Display Status Register, Address offset: 0x48 */ -} LTDC_TypeDef; - -/** - * @brief LCD-TFT Display layer x Controller - */ - -typedef struct -{ - __IO uint32_t CR; /*!< LTDC Layerx Control Register Address offset: 0x84 */ - __IO uint32_t WHPCR; /*!< LTDC Layerx Window Horizontal Position Configuration Register Address offset: 0x88 */ - __IO uint32_t WVPCR; /*!< LTDC Layerx Window Vertical Position Configuration Register Address offset: 0x8C */ - __IO uint32_t CKCR; /*!< LTDC Layerx Color Keying Configuration Register Address offset: 0x90 */ - __IO uint32_t PFCR; /*!< LTDC Layerx Pixel Format Configuration Register Address offset: 0x94 */ - __IO uint32_t CACR; /*!< LTDC Layerx Constant Alpha Configuration Register Address offset: 0x98 */ - __IO uint32_t DCCR; /*!< LTDC Layerx Default Color Configuration Register Address offset: 0x9C */ - __IO uint32_t BFCR; /*!< LTDC Layerx Blending Factors Configuration Register Address offset: 0xA0 */ - uint32_t RESERVED0[2]; /*!< Reserved */ - __IO uint32_t CFBAR; /*!< LTDC Layerx Color Frame Buffer Address Register Address offset: 0xAC */ - __IO uint32_t CFBLR; /*!< LTDC Layerx Color Frame Buffer Length Register Address offset: 0xB0 */ - __IO uint32_t CFBLNR; /*!< LTDC Layerx ColorFrame Buffer Line Number Register Address offset: 0xB4 */ - uint32_t RESERVED1[3]; /*!< Reserved */ - __IO uint32_t CLUTWR; /*!< LTDC Layerx CLUT Write Register Address offset: 0x144 */ - -} LTDC_Layer_TypeDef; - -/** - * @brief Power Control - */ - -typedef struct -{ - __IO uint32_t CR1; /*!< PWR power control register 1, Address offset: 0x00 */ - __IO uint32_t CSR1; /*!< PWR power control/status register 2, Address offset: 0x04 */ - __IO uint32_t CR2; /*!< PWR power control register 2, Address offset: 0x08 */ - __IO uint32_t CSR2; /*!< PWR power control/status register 2, Address offset: 0x0C */ -} PWR_TypeDef; - - -/** - * @brief Reset and Clock Control - */ - -typedef struct -{ - __IO uint32_t CR; /*!< RCC clock control register, Address offset: 0x00 */ - __IO uint32_t PLLCFGR; /*!< RCC PLL configuration register, Address offset: 0x04 */ - __IO uint32_t CFGR; /*!< RCC clock configuration register, Address offset: 0x08 */ - __IO uint32_t CIR; /*!< RCC clock interrupt register, Address offset: 0x0C */ - __IO uint32_t AHB1RSTR; /*!< RCC AHB1 peripheral reset register, Address offset: 0x10 */ - __IO uint32_t AHB2RSTR; /*!< RCC AHB2 peripheral reset register, Address offset: 0x14 */ - __IO uint32_t AHB3RSTR; /*!< RCC AHB3 peripheral reset register, Address offset: 0x18 */ - uint32_t RESERVED0; /*!< Reserved, 0x1C */ - __IO uint32_t APB1RSTR; /*!< RCC APB1 peripheral reset register, Address offset: 0x20 */ - __IO uint32_t APB2RSTR; /*!< RCC APB2 peripheral reset register, Address offset: 0x24 */ - uint32_t RESERVED1[2]; /*!< Reserved, 0x28-0x2C */ - __IO uint32_t AHB1ENR; /*!< RCC AHB1 peripheral clock register, Address offset: 0x30 */ - __IO uint32_t AHB2ENR; /*!< RCC AHB2 peripheral clock register, Address offset: 0x34 */ - __IO uint32_t AHB3ENR; /*!< RCC AHB3 peripheral clock register, Address offset: 0x38 */ - uint32_t RESERVED2; /*!< Reserved, 0x3C */ - __IO uint32_t APB1ENR; /*!< RCC APB1 peripheral clock enable register, Address offset: 0x40 */ - __IO uint32_t APB2ENR; /*!< RCC APB2 peripheral clock enable register, Address offset: 0x44 */ - uint32_t RESERVED3[2]; /*!< Reserved, 0x48-0x4C */ - __IO uint32_t AHB1LPENR; /*!< RCC AHB1 peripheral clock enable in low power mode register, Address offset: 0x50 */ - __IO uint32_t AHB2LPENR; /*!< RCC AHB2 peripheral clock enable in low power mode register, Address offset: 0x54 */ - __IO uint32_t AHB3LPENR; /*!< RCC AHB3 peripheral clock enable in low power mode register, Address offset: 0x58 */ - uint32_t RESERVED4; /*!< Reserved, 0x5C */ - __IO uint32_t APB1LPENR; /*!< RCC APB1 peripheral clock enable in low power mode register, Address offset: 0x60 */ - __IO uint32_t APB2LPENR; /*!< RCC APB2 peripheral clock enable in low power mode register, Address offset: 0x64 */ - uint32_t RESERVED5[2]; /*!< Reserved, 0x68-0x6C */ - __IO uint32_t BDCR; /*!< RCC Backup domain control register, Address offset: 0x70 */ - __IO uint32_t CSR; /*!< RCC clock control & status register, Address offset: 0x74 */ - uint32_t RESERVED6[2]; /*!< Reserved, 0x78-0x7C */ - __IO uint32_t SSCGR; /*!< RCC spread spectrum clock generation register, Address offset: 0x80 */ - __IO uint32_t PLLI2SCFGR; /*!< RCC PLLI2S configuration register, Address offset: 0x84 */ - __IO uint32_t PLLSAICFGR; /*!< RCC PLLSAI configuration register, Address offset: 0x88 */ - __IO uint32_t DCKCFGR1; /*!< RCC Dedicated Clocks configuration register1, Address offset: 0x8C */ - __IO uint32_t DCKCFGR2; /*!< RCC Dedicated Clocks configuration register 2, Address offset: 0x90 */ - -} RCC_TypeDef; - -/** - * @brief Real-Time Clock - */ - -typedef struct -{ - __IO uint32_t TR; /*!< RTC time register, Address offset: 0x00 */ - __IO uint32_t DR; /*!< RTC date register, Address offset: 0x04 */ - __IO uint32_t CR; /*!< RTC control register, Address offset: 0x08 */ - __IO uint32_t ISR; /*!< RTC initialization and status register, Address offset: 0x0C */ - __IO uint32_t PRER; /*!< RTC prescaler register, Address offset: 0x10 */ - __IO uint32_t WUTR; /*!< RTC wakeup timer register, Address offset: 0x14 */ - uint32_t reserved; /*!< Reserved */ - __IO uint32_t ALRMAR; /*!< RTC alarm A register, Address offset: 0x1C */ - __IO uint32_t ALRMBR; /*!< RTC alarm B register, Address offset: 0x20 */ - __IO uint32_t WPR; /*!< RTC write protection register, Address offset: 0x24 */ - __IO uint32_t SSR; /*!< RTC sub second register, Address offset: 0x28 */ - __IO uint32_t SHIFTR; /*!< RTC shift control register, Address offset: 0x2C */ - __IO uint32_t TSTR; /*!< RTC time stamp time register, Address offset: 0x30 */ - __IO uint32_t TSDR; /*!< RTC time stamp date register, Address offset: 0x34 */ - __IO uint32_t TSSSR; /*!< RTC time-stamp sub second register, Address offset: 0x38 */ - __IO uint32_t CALR; /*!< RTC calibration register, Address offset: 0x3C */ - __IO uint32_t TAMPCR; /*!< RTC tamper configuration register, Address offset: 0x40 */ - __IO uint32_t ALRMASSR; /*!< RTC alarm A sub second register, Address offset: 0x44 */ - __IO uint32_t ALRMBSSR; /*!< RTC alarm B sub second register, Address offset: 0x48 */ - __IO uint32_t OR; /*!< RTC option register, Address offset: 0x4C */ - __IO uint32_t BKP0R; /*!< RTC backup register 0, Address offset: 0x50 */ - __IO uint32_t BKP1R; /*!< RTC backup register 1, Address offset: 0x54 */ - __IO uint32_t BKP2R; /*!< RTC backup register 2, Address offset: 0x58 */ - __IO uint32_t BKP3R; /*!< RTC backup register 3, Address offset: 0x5C */ - __IO uint32_t BKP4R; /*!< RTC backup register 4, Address offset: 0x60 */ - __IO uint32_t BKP5R; /*!< RTC backup register 5, Address offset: 0x64 */ - __IO uint32_t BKP6R; /*!< RTC backup register 6, Address offset: 0x68 */ - __IO uint32_t BKP7R; /*!< RTC backup register 7, Address offset: 0x6C */ - __IO uint32_t BKP8R; /*!< RTC backup register 8, Address offset: 0x70 */ - __IO uint32_t BKP9R; /*!< RTC backup register 9, Address offset: 0x74 */ - __IO uint32_t BKP10R; /*!< RTC backup register 10, Address offset: 0x78 */ - __IO uint32_t BKP11R; /*!< RTC backup register 11, Address offset: 0x7C */ - __IO uint32_t BKP12R; /*!< RTC backup register 12, Address offset: 0x80 */ - __IO uint32_t BKP13R; /*!< RTC backup register 13, Address offset: 0x84 */ - __IO uint32_t BKP14R; /*!< RTC backup register 14, Address offset: 0x88 */ - __IO uint32_t BKP15R; /*!< RTC backup register 15, Address offset: 0x8C */ - __IO uint32_t BKP16R; /*!< RTC backup register 16, Address offset: 0x90 */ - __IO uint32_t BKP17R; /*!< RTC backup register 17, Address offset: 0x94 */ - __IO uint32_t BKP18R; /*!< RTC backup register 18, Address offset: 0x98 */ - __IO uint32_t BKP19R; /*!< RTC backup register 19, Address offset: 0x9C */ - __IO uint32_t BKP20R; /*!< RTC backup register 20, Address offset: 0xA0 */ - __IO uint32_t BKP21R; /*!< RTC backup register 21, Address offset: 0xA4 */ - __IO uint32_t BKP22R; /*!< RTC backup register 22, Address offset: 0xA8 */ - __IO uint32_t BKP23R; /*!< RTC backup register 23, Address offset: 0xAC */ - __IO uint32_t BKP24R; /*!< RTC backup register 24, Address offset: 0xB0 */ - __IO uint32_t BKP25R; /*!< RTC backup register 25, Address offset: 0xB4 */ - __IO uint32_t BKP26R; /*!< RTC backup register 26, Address offset: 0xB8 */ - __IO uint32_t BKP27R; /*!< RTC backup register 27, Address offset: 0xBC */ - __IO uint32_t BKP28R; /*!< RTC backup register 28, Address offset: 0xC0 */ - __IO uint32_t BKP29R; /*!< RTC backup register 29, Address offset: 0xC4 */ - __IO uint32_t BKP30R; /*!< RTC backup register 30, Address offset: 0xC8 */ - __IO uint32_t BKP31R; /*!< RTC backup register 31, Address offset: 0xCC */ -} RTC_TypeDef; - - -/** - * @brief Serial Audio Interface - */ - -typedef struct -{ - __IO uint32_t GCR; /*!< SAI global configuration register, Address offset: 0x00 */ -} SAI_TypeDef; - -typedef struct -{ - __IO uint32_t CR1; /*!< SAI block x configuration register 1, Address offset: 0x04 */ - __IO uint32_t CR2; /*!< SAI block x configuration register 2, Address offset: 0x08 */ - __IO uint32_t FRCR; /*!< SAI block x frame configuration register, Address offset: 0x0C */ - __IO uint32_t SLOTR; /*!< SAI block x slot register, Address offset: 0x10 */ - __IO uint32_t IMR; /*!< SAI block x interrupt mask register, Address offset: 0x14 */ - __IO uint32_t SR; /*!< SAI block x status register, Address offset: 0x18 */ - __IO uint32_t CLRFR; /*!< SAI block x clear flag register, Address offset: 0x1C */ - __IO uint32_t DR; /*!< SAI block x data register, Address offset: 0x20 */ -} SAI_Block_TypeDef; - -/** - * @brief SPDIF-RX Interface - */ - -typedef struct -{ - __IO uint32_t CR; /*!< Control register, Address offset: 0x00 */ - __IO uint32_t IMR; /*!< Interrupt mask register, Address offset: 0x04 */ - __IO uint32_t SR; /*!< Status register, Address offset: 0x08 */ - __IO uint32_t IFCR; /*!< Interrupt Flag Clear register, Address offset: 0x0C */ - __IO uint32_t DR; /*!< Data input register, Address offset: 0x10 */ - __IO uint32_t CSR; /*!< Channel Status register, Address offset: 0x14 */ - __IO uint32_t DIR; /*!< Debug Information register, Address offset: 0x18 */ -} SPDIFRX_TypeDef; - -/** - * @brief SD host Interface - */ - -typedef struct -{ - __IO uint32_t POWER; /*!< SDMMC power control register, Address offset: 0x00 */ - __IO uint32_t CLKCR; /*!< SDMMClock control register, Address offset: 0x04 */ - __IO uint32_t ARG; /*!< SDMMC argument register, Address offset: 0x08 */ - __IO uint32_t CMD; /*!< SDMMC command register, Address offset: 0x0C */ - __I uint32_t RESPCMD; /*!< SDMMC command response register, Address offset: 0x10 */ - __I uint32_t RESP1; /*!< SDMMC response 1 register, Address offset: 0x14 */ - __I uint32_t RESP2; /*!< SDMMC response 2 register, Address offset: 0x18 */ - __I uint32_t RESP3; /*!< SDMMC response 3 register, Address offset: 0x1C */ - __I uint32_t RESP4; /*!< SDMMC response 4 register, Address offset: 0x20 */ - __IO uint32_t DTIMER; /*!< SDMMC data timer register, Address offset: 0x24 */ - __IO uint32_t DLEN; /*!< SDMMC data length register, Address offset: 0x28 */ - __IO uint32_t DCTRL; /*!< SDMMC data control register, Address offset: 0x2C */ - __I uint32_t DCOUNT; /*!< SDMMC data counter register, Address offset: 0x30 */ - __I uint32_t STA; /*!< SDMMC status register, Address offset: 0x34 */ - __IO uint32_t ICR; /*!< SDMMC interrupt clear register, Address offset: 0x38 */ - __IO uint32_t MASK; /*!< SDMMC mask register, Address offset: 0x3C */ - uint32_t RESERVED0[2]; /*!< Reserved, 0x40-0x44 */ - __I uint32_t FIFOCNT; /*!< SDMMC FIFO counter register, Address offset: 0x48 */ - uint32_t RESERVED1[13]; /*!< Reserved, 0x4C-0x7C */ - __IO uint32_t FIFO; /*!< SDMMC data FIFO register, Address offset: 0x80 */ -} SDMMC_TypeDef; - -/** - * @brief Serial Peripheral Interface - */ - -typedef struct -{ - __IO uint32_t CR1; /*!< SPI control register 1 (not used in I2S mode), Address offset: 0x00 */ - __IO uint32_t CR2; /*!< SPI control register 2, Address offset: 0x04 */ - __IO uint32_t SR; /*!< SPI status register, Address offset: 0x08 */ - __IO uint32_t DR; /*!< SPI data register, Address offset: 0x0C */ - __IO uint32_t CRCPR; /*!< SPI CRC polynomial register (not used in I2S mode), Address offset: 0x10 */ - __IO uint32_t RXCRCR; /*!< SPI RX CRC register (not used in I2S mode), Address offset: 0x14 */ - __IO uint32_t TXCRCR; /*!< SPI TX CRC register (not used in I2S mode), Address offset: 0x18 */ - __IO uint32_t I2SCFGR; /*!< SPI_I2S configuration register, Address offset: 0x1C */ - __IO uint32_t I2SPR; /*!< SPI_I2S prescaler register, Address offset: 0x20 */ -} SPI_TypeDef; - -/** - * @brief QUAD Serial Peripheral Interface - */ - -typedef struct -{ - __IO uint32_t CR; /*!< QUADSPI Control register, Address offset: 0x00 */ - __IO uint32_t DCR; /*!< QUADSPI Device Configuration register, Address offset: 0x04 */ - __IO uint32_t SR; /*!< QUADSPI Status register, Address offset: 0x08 */ - __IO uint32_t FCR; /*!< QUADSPI Flag Clear register, Address offset: 0x0C */ - __IO uint32_t DLR; /*!< QUADSPI Data Length register, Address offset: 0x10 */ - __IO uint32_t CCR; /*!< QUADSPI Communication Configuration register, Address offset: 0x14 */ - __IO uint32_t AR; /*!< QUADSPI Address register, Address offset: 0x18 */ - __IO uint32_t ABR; /*!< QUADSPI Alternate Bytes register, Address offset: 0x1C */ - __IO uint32_t DR; /*!< QUADSPI Data register, Address offset: 0x20 */ - __IO uint32_t PSMKR; /*!< QUADSPI Polling Status Mask register, Address offset: 0x24 */ - __IO uint32_t PSMAR; /*!< QUADSPI Polling Status Match register, Address offset: 0x28 */ - __IO uint32_t PIR; /*!< QUADSPI Polling Interval register, Address offset: 0x2C */ - __IO uint32_t LPTR; /*!< QUADSPI Low Power Timeout register, Address offset: 0x30 */ -} QUADSPI_TypeDef; - -/** - * @brief TIM - */ - -typedef struct -{ - __IO uint32_t CR1; /*!< TIM control register 1, Address offset: 0x00 */ - __IO uint32_t CR2; /*!< TIM control register 2, Address offset: 0x04 */ - __IO uint32_t SMCR; /*!< TIM slave mode control register, Address offset: 0x08 */ - __IO uint32_t DIER; /*!< TIM DMA/interrupt enable register, Address offset: 0x0C */ - __IO uint32_t SR; /*!< TIM status register, Address offset: 0x10 */ - __IO uint32_t EGR; /*!< TIM event generation register, Address offset: 0x14 */ - __IO uint32_t CCMR1; /*!< TIM capture/compare mode register 1, Address offset: 0x18 */ - __IO uint32_t CCMR2; /*!< TIM capture/compare mode register 2, Address offset: 0x1C */ - __IO uint32_t CCER; /*!< TIM capture/compare enable register, Address offset: 0x20 */ - __IO uint32_t CNT; /*!< TIM counter register, Address offset: 0x24 */ - __IO uint32_t PSC; /*!< TIM prescaler, Address offset: 0x28 */ - __IO uint32_t ARR; /*!< TIM auto-reload register, Address offset: 0x2C */ - __IO uint32_t RCR; /*!< TIM repetition counter register, Address offset: 0x30 */ - __IO uint32_t CCR1; /*!< TIM capture/compare register 1, Address offset: 0x34 */ - __IO uint32_t CCR2; /*!< TIM capture/compare register 2, Address offset: 0x38 */ - __IO uint32_t CCR3; /*!< TIM capture/compare register 3, Address offset: 0x3C */ - __IO uint32_t CCR4; /*!< TIM capture/compare register 4, Address offset: 0x40 */ - __IO uint32_t BDTR; /*!< TIM break and dead-time register, Address offset: 0x44 */ - __IO uint32_t DCR; /*!< TIM DMA control register, Address offset: 0x48 */ - __IO uint32_t DMAR; /*!< TIM DMA address for full transfer, Address offset: 0x4C */ - __IO uint32_t OR; /*!< TIM option register, Address offset: 0x50 */ - __IO uint32_t CCMR3; /*!< TIM capture/compare mode register 3, Address offset: 0x54 */ - __IO uint32_t CCR5; /*!< TIM capture/compare mode register5, Address offset: 0x58 */ - __IO uint32_t CCR6; /*!< TIM capture/compare mode register6, Address offset: 0x5C */ - __IO uint32_t AF1; /*!< TIM Alternate function option register 1, Address offset: 0x60 */ - __IO uint32_t AF2; /*!< TIM Alternate function option register 2, Address offset: 0x64 */ - -} TIM_TypeDef; - -/** - * @brief LPTIMIMER - */ -typedef struct -{ - __IO uint32_t ISR; /*!< LPTIM Interrupt and Status register, Address offset: 0x00 */ - __IO uint32_t ICR; /*!< LPTIM Interrupt Clear register, Address offset: 0x04 */ - __IO uint32_t IER; /*!< LPTIM Interrupt Enable register, Address offset: 0x08 */ - __IO uint32_t CFGR; /*!< LPTIM Configuration register, Address offset: 0x0C */ - __IO uint32_t CR; /*!< LPTIM Control register, Address offset: 0x10 */ - __IO uint32_t CMP; /*!< LPTIM Compare register, Address offset: 0x14 */ - __IO uint32_t ARR; /*!< LPTIM Autoreload register, Address offset: 0x18 */ - __IO uint32_t CNT; /*!< LPTIM Counter register, Address offset: 0x1C */ -} LPTIM_TypeDef; - - -/** - * @brief Universal Synchronous Asynchronous Receiver Transmitter - */ - -typedef struct -{ - __IO uint32_t CR1; /*!< USART Control register 1, Address offset: 0x00 */ - __IO uint32_t CR2; /*!< USART Control register 2, Address offset: 0x04 */ - __IO uint32_t CR3; /*!< USART Control register 3, Address offset: 0x08 */ - __IO uint32_t BRR; /*!< USART Baud rate register, Address offset: 0x0C */ - __IO uint32_t GTPR; /*!< USART Guard time and prescaler register, Address offset: 0x10 */ - __IO uint32_t RTOR; /*!< USART Receiver Time Out register, Address offset: 0x14 */ - __IO uint32_t RQR; /*!< USART Request register, Address offset: 0x18 */ - __IO uint32_t ISR; /*!< USART Interrupt and status register, Address offset: 0x1C */ - __IO uint32_t ICR; /*!< USART Interrupt flag Clear register, Address offset: 0x20 */ - __IO uint32_t RDR; /*!< USART Receive Data register, Address offset: 0x24 */ - __IO uint32_t TDR; /*!< USART Transmit Data register, Address offset: 0x28 */ -} USART_TypeDef; - - -/** - * @brief Window WATCHDOG - */ - -typedef struct -{ - __IO uint32_t CR; /*!< WWDG Control register, Address offset: 0x00 */ - __IO uint32_t CFR; /*!< WWDG Configuration register, Address offset: 0x04 */ - __IO uint32_t SR; /*!< WWDG Status register, Address offset: 0x08 */ -} WWDG_TypeDef; - - -/** - * @brief RNG - */ - -typedef struct -{ - __IO uint32_t CR; /*!< RNG control register, Address offset: 0x00 */ - __IO uint32_t SR; /*!< RNG status register, Address offset: 0x04 */ - __IO uint32_t DR; /*!< RNG data register, Address offset: 0x08 */ -} RNG_TypeDef; - -/** - * @} - */ - -/** - * @brief USB_OTG_Core_Registers - */ -typedef struct -{ - __IO uint32_t GOTGCTL; /*!< USB_OTG Control and Status Register 000h */ - __IO uint32_t GOTGINT; /*!< USB_OTG Interrupt Register 004h */ - __IO uint32_t GAHBCFG; /*!< Core AHB Configuration Register 008h */ - __IO uint32_t GUSBCFG; /*!< Core USB Configuration Register 00Ch */ - __IO uint32_t GRSTCTL; /*!< Core Reset Register 010h */ - __IO uint32_t GINTSTS; /*!< Core Interrupt Register 014h */ - __IO uint32_t GINTMSK; /*!< Core Interrupt Mask Register 018h */ - __IO uint32_t GRXSTSR; /*!< Receive Sts Q Read Register 01Ch */ - __IO uint32_t GRXSTSP; /*!< Receive Sts Q Read & POP Register 020h */ - __IO uint32_t GRXFSIZ; /*!< Receive FIFO Size Register 024h */ - __IO uint32_t DIEPTXF0_HNPTXFSIZ; /*!< EP0 / Non Periodic Tx FIFO Size Register 028h */ - __IO uint32_t HNPTXSTS; /*!< Non Periodic Tx FIFO/Queue Sts reg 02Ch */ - uint32_t Reserved30[2]; /*!< Reserved 030h */ - __IO uint32_t GCCFG; /*!< General Purpose IO Register 038h */ - __IO uint32_t CID; /*!< User ID Register 03Ch */ - uint32_t Reserved5[3]; /*!< Reserved 040h-048h */ - __IO uint32_t GHWCFG3; /*!< User HW config3 04Ch */ - uint32_t Reserved6; /*!< Reserved 050h */ - __IO uint32_t GLPMCFG; /*!< LPM Register 054h */ - uint32_t Reserved7; /*!< Reserved 058h */ - __IO uint32_t GDFIFOCFG; /*!< DFIFO Software Config Register 05Ch */ - uint32_t Reserved43[40]; /*!< Reserved 60h-0FFh */ - __IO uint32_t HPTXFSIZ; /*!< Host Periodic Tx FIFO Size Reg 100h */ - __IO uint32_t DIEPTXF[0x0F]; /*!< dev Periodic Transmit FIFO 104h-13Ch */ -} USB_OTG_GlobalTypeDef; - - -/** - * @brief USB_OTG_device_Registers - */ -typedef struct -{ - __IO uint32_t DCFG; /*!< dev Configuration Register 800h */ - __IO uint32_t DCTL; /*!< dev Control Register 804h */ - __IO uint32_t DSTS; /*!< dev Status Register (RO) 808h */ - uint32_t Reserved0C; /*!< Reserved 80Ch */ - __IO uint32_t DIEPMSK; /*!< dev IN Endpoint Mask 810h */ - __IO uint32_t DOEPMSK; /*!< dev OUT Endpoint Mask 814h */ - __IO uint32_t DAINT; /*!< dev All Endpoints Itr Reg 818h */ - __IO uint32_t DAINTMSK; /*!< dev All Endpoints Itr Mask 81Ch */ - uint32_t Reserved20; /*!< Reserved 820h */ - uint32_t Reserved9; /*!< Reserved 824h */ - __IO uint32_t DVBUSDIS; /*!< dev VBUS discharge Register 828h */ - __IO uint32_t DVBUSPULSE; /*!< dev VBUS Pulse Register 82Ch */ - __IO uint32_t DTHRCTL; /*!< dev threshold 830h */ - __IO uint32_t DIEPEMPMSK; /*!< dev empty msk 834h */ - __IO uint32_t DEACHINT; /*!< dedicated EP interrupt 838h */ - __IO uint32_t DEACHMSK; /*!< dedicated EP msk 83Ch */ - uint32_t Reserved40; /*!< dedicated EP mask 840h */ - __IO uint32_t DINEP1MSK; /*!< dedicated EP mask 844h */ - uint32_t Reserved44[15]; /*!< Reserved 844-87Ch */ - __IO uint32_t DOUTEP1MSK; /*!< dedicated EP msk 884h */ -} USB_OTG_DeviceTypeDef; - - -/** - * @brief USB_OTG_IN_Endpoint-Specific_Register - */ -typedef struct -{ - __IO uint32_t DIEPCTL; /*!< dev IN Endpoint Control Reg 900h + (ep_num * 20h) + 00h */ - uint32_t Reserved04; /*!< Reserved 900h + (ep_num * 20h) + 04h */ - __IO uint32_t DIEPINT; /*!< dev IN Endpoint Itr Reg 900h + (ep_num * 20h) + 08h */ - uint32_t Reserved0C; /*!< Reserved 900h + (ep_num * 20h) + 0Ch */ - __IO uint32_t DIEPTSIZ; /*!< IN Endpoint Txfer Size 900h + (ep_num * 20h) + 10h */ - __IO uint32_t DIEPDMA; /*!< IN Endpoint DMA Address Reg 900h + (ep_num * 20h) + 14h */ - __IO uint32_t DTXFSTS; /*!< IN Endpoint Tx FIFO Status Reg 900h + (ep_num * 20h) + 18h */ - uint32_t Reserved18; /*!< Reserved 900h+(ep_num*20h)+1Ch-900h+ (ep_num * 20h) + 1Ch */ -} USB_OTG_INEndpointTypeDef; - - -/** - * @brief USB_OTG_OUT_Endpoint-Specific_Registers - */ -typedef struct -{ - __IO uint32_t DOEPCTL; /*!< dev OUT Endpoint Control Reg B00h + (ep_num * 20h) + 00h */ - uint32_t Reserved04; /*!< Reserved B00h + (ep_num * 20h) + 04h */ - __IO uint32_t DOEPINT; /*!< dev OUT Endpoint Itr Reg B00h + (ep_num * 20h) + 08h */ - uint32_t Reserved0C; /*!< Reserved B00h + (ep_num * 20h) + 0Ch */ - __IO uint32_t DOEPTSIZ; /*!< dev OUT Endpoint Txfer Size B00h + (ep_num * 20h) + 10h */ - __IO uint32_t DOEPDMA; /*!< dev OUT Endpoint DMA Address B00h + (ep_num * 20h) + 14h */ - uint32_t Reserved18[2]; /*!< Reserved B00h + (ep_num * 20h) + 18h - B00h + (ep_num * 20h) + 1Ch */ -} USB_OTG_OUTEndpointTypeDef; - - -/** - * @brief USB_OTG_Host_Mode_Register_Structures - */ -typedef struct -{ - __IO uint32_t HCFG; /*!< Host Configuration Register 400h */ - __IO uint32_t HFIR; /*!< Host Frame Interval Register 404h */ - __IO uint32_t HFNUM; /*!< Host Frame Nbr/Frame Remaining 408h */ - uint32_t Reserved40C; /*!< Reserved 40Ch */ - __IO uint32_t HPTXSTS; /*!< Host Periodic Tx FIFO/ Queue Status 410h */ - __IO uint32_t HAINT; /*!< Host All Channels Interrupt Register 414h */ - __IO uint32_t HAINTMSK; /*!< Host All Channels Interrupt Mask 418h */ -} USB_OTG_HostTypeDef; - -/** - * @brief USB_OTG_Host_Channel_Specific_Registers - */ -typedef struct -{ - __IO uint32_t HCCHAR; /*!< Host Channel Characteristics Register 500h */ - __IO uint32_t HCSPLT; /*!< Host Channel Split Control Register 504h */ - __IO uint32_t HCINT; /*!< Host Channel Interrupt Register 508h */ - __IO uint32_t HCINTMSK; /*!< Host Channel Interrupt Mask Register 50Ch */ - __IO uint32_t HCTSIZ; /*!< Host Channel Transfer Size Register 510h */ - __IO uint32_t HCDMA; /*!< Host Channel DMA Address Register 514h */ - uint32_t Reserved[2]; /*!< Reserved */ -} USB_OTG_HostChannelTypeDef; -/** - * @} - */ - -/** - * @brief JPEG Codec - */ -typedef struct -{ - __IO uint32_t CONFR0; /*!< JPEG Codec Control Register (JPEG_CONFR0), Address offset: 00h */ - __IO uint32_t CONFR1; /*!< JPEG Codec Control Register (JPEG_CONFR1), Address offset: 04h */ - __IO uint32_t CONFR2; /*!< JPEG Codec Control Register (JPEG_CONFR2), Address offset: 08h */ - __IO uint32_t CONFR3; /*!< JPEG Codec Control Register (JPEG_CONFR3), Address offset: 0Ch */ - __IO uint32_t CONFR4; /*!< JPEG Codec Control Register (JPEG_CONFR4), Address offset: 10h */ - __IO uint32_t CONFR5; /*!< JPEG Codec Control Register (JPEG_CONFR5), Address offset: 14h */ - __IO uint32_t CONFR6; /*!< JPEG Codec Control Register (JPEG_CONFR6), Address offset: 18h */ - __IO uint32_t CONFR7; /*!< JPEG Codec Control Register (JPEG_CONFR7), Address offset: 1Ch */ - uint32_t Reserved20[4]; /* Reserved Address offset: 20h-2Ch */ - __IO uint32_t CR; /*!< JPEG Control Register (JPEG_CR), Address offset: 30h */ - __IO uint32_t SR; /*!< JPEG Status Register (JPEG_SR), Address offset: 34h */ - __IO uint32_t CFR; /*!< JPEG Clear Flag Register (JPEG_CFR), Address offset: 38h */ - uint32_t Reserved3c; /* Reserved Address offset: 3Ch */ - __IO uint32_t DIR; /*!< JPEG Data Input Register (JPEG_DIR), Address offset: 40h */ - __IO uint32_t DOR; /*!< JPEG Data Output Register (JPEG_DOR), Address offset: 44h */ - uint32_t Reserved48[2]; /* Reserved Address offset: 48h-4Ch */ - __IO uint32_t QMEM0[16]; /*!< JPEG quantization tables 0, Address offset: 50h-8Ch */ - __IO uint32_t QMEM1[16]; /*!< JPEG quantization tables 1, Address offset: 90h-CCh */ - __IO uint32_t QMEM2[16]; /*!< JPEG quantization tables 2, Address offset: D0h-10Ch */ - __IO uint32_t QMEM3[16]; /*!< JPEG quantization tables 3, Address offset: 110h-14Ch */ - __IO uint32_t HUFFMIN[16]; /*!< JPEG HuffMin tables, Address offset: 150h-18Ch */ - __IO uint32_t HUFFBASE[32]; /*!< JPEG HuffSymb tables, Address offset: 190h-20Ch */ - __IO uint32_t HUFFSYMB[84]; /*!< JPEG HUFFSYMB tables, Address offset: 210h-35Ch */ - __IO uint32_t DHTMEM[103]; /*!< JPEG DHTMem tables, Address offset: 360h-4F8h */ - uint32_t Reserved4FC; /* Reserved Address offset: 4FCh */ - __IO uint32_t HUFFENC_AC0[88]; /*!< JPEG encoder, AC Huffman table 0, Address offset: 500h-65Ch */ - __IO uint32_t HUFFENC_AC1[88]; /*!< JPEG encoder, AC Huffman table 1, Address offset: 660h-7BCh */ - __IO uint32_t HUFFENC_DC0[8]; /*!< JPEG encoder, DC Huffman table 0, Address offset: 7C0h-7DCh */ - __IO uint32_t HUFFENC_DC1[8]; /*!< JPEG encoder, DC Huffman table 1, Address offset: 7E0h-7FCh */ - -} JPEG_TypeDef; - -/** - * @brief MDIOS - */ - -typedef struct -{ - __IO uint32_t CR; /*!< MDIOS Configuration Register (MDIOS_CR), Address offset: 00h */ - __IO uint32_t WRFR; /*!< MDIOS Configuration Register (MDIOS_CR), Address offset: 04h */ - __IO uint32_t CWRFR; /*!< MDIOS Configuration Register (MDIOS_CR), Address offset: 08h */ - __IO uint32_t RDFR; /*!< MDIOS Configuration Register (MDIOS_CR), Address offset: 0Ch */ - __IO uint32_t CRDFR; /*!< MDIOS Configuration Register (MDIOS_CR), Address offset: 10h */ - __IO uint32_t SR; /*!< MDIOS Configuration Register (MDIOS_CR), Address offset: 14h */ - __IO uint32_t CLRFR; /*!< MDIOS Configuration Register (MDIOS_CR), Address offset: 18h */ - uint32_t RESERVED0[57]; /* Reserved Address offset: 1Ch */ - __IO uint32_t DINR0; /*!< MDIOS Input Data Register (MDIOS_DINR0), Address offset: 100h */ - __IO uint32_t DINR1; /*!< MDIOS Input Data Register (MDIOS_DINR1), Address offset: 104h */ - __IO uint32_t DINR2; /*!< MDIOS Input Data Register (MDIOS_DINR2), Address offset: 108h */ - __IO uint32_t DINR3; /*!< MDIOS Input Data Register (MDIOS_DINR3), Address offset: 10Ch */ - __IO uint32_t DINR4; /*!< MDIOS Input Data Register (MDIOS_DINR4), Address offset: 110h */ - __IO uint32_t DINR5; /*!< MDIOS Input Data Register (MDIOS_DINR5), Address offset: 114h */ - __IO uint32_t DINR6; /*!< MDIOS Input Data Register (MDIOS_DINR6), Address offset: 118h */ - __IO uint32_t DINR7; /*!< MDIOS Input Data Register (MDIOS_DINR7), Address offset: 11Ch */ - __IO uint32_t DINR8; /*!< MDIOS Input Data Register (MDIOS_DINR8), Address offset: 120h */ - __IO uint32_t DINR9; /*!< MDIOS Input Data Register (MDIOS_DINR9), Address offset: 124h */ - __IO uint32_t DINR10; /*!< MDIOS Input Data Register (MDIOS_DINR10), Address offset: 128h */ - __IO uint32_t DINR11; /*!< MDIOS Input Data Register (MDIOS_DINR11), Address offset: 12Ch */ - __IO uint32_t DINR12; /*!< MDIOS Input Data Register (MDIOS_DINR12), Address offset: 130h */ - __IO uint32_t DINR13; /*!< MDIOS Input Data Register (MDIOS_DINR13), Address offset: 134h */ - __IO uint32_t DINR14; /*!< MDIOS Input Data Register (MDIOS_DINR14), Address offset: 138h */ - __IO uint32_t DINR15; /*!< MDIOS Input Data Register (MDIOS_DINR15), Address offset: 13Ch */ - __IO uint32_t DINR16; /*!< MDIOS Input Data Register (MDIOS_DINR16), Address offset: 140h */ - __IO uint32_t DINR17; /*!< MDIOS Input Data Register (MDIOS_DINR17), Address offset: 144h */ - __IO uint32_t DINR18; /*!< MDIOS Input Data Register (MDIOS_DINR18), Address offset: 148h */ - __IO uint32_t DINR19; /*!< MDIOS Input Data Register (MDIOS_DINR19), Address offset: 14Ch */ - __IO uint32_t DINR20; /*!< MDIOS Input Data Register (MDIOS_DINR20), Address offset: 150h */ - __IO uint32_t DINR21; /*!< MDIOS Input Data Register (MDIOS_DINR21), Address offset: 154h */ - __IO uint32_t DINR22; /*!< MDIOS Input Data Register (MDIOS_DINR22), Address offset: 158h */ - __IO uint32_t DINR23; /*!< MDIOS Input Data Register (MDIOS_DINR23), Address offset: 15Ch */ - __IO uint32_t DINR24; /*!< MDIOS Input Data Register (MDIOS_DINR24), Address offset: 160h */ - __IO uint32_t DINR25; /*!< MDIOS Input Data Register (MDIOS_DINR25), Address offset: 164h */ - __IO uint32_t DINR26; /*!< MDIOS Input Data Register (MDIOS_DINR26), Address offset: 168h */ - __IO uint32_t DINR27; /*!< MDIOS Input Data Register (MDIOS_DINR27), Address offset: 16Ch */ - __IO uint32_t DINR28; /*!< MDIOS Input Data Register (MDIOS_DINR28), Address offset: 170h */ - __IO uint32_t DINR29; /*!< MDIOS Input Data Register (MDIOS_DINR29), Address offset: 174h */ - __IO uint32_t DINR30; /*!< MDIOS Input Data Register (MDIOS_DINR30), Address offset: 178h */ - __IO uint32_t DINR31; /*!< MDIOS Input Data Register (MDIOS_DINR31), Address offset: 17Ch */ - __IO uint32_t DOUTR0; /*!< MDIOS Output Data Register (MDIOS_DOUTR0), Address offset: 180h */ - __IO uint32_t DOUTR1; /*!< MDIOS Output Data Register (MDIOS_DOUTR1), Address offset: 184h */ - __IO uint32_t DOUTR2; /*!< MDIOS Output Data Register (MDIOS_DOUTR2), Address offset: 188h */ - __IO uint32_t DOUTR3; /*!< MDIOS Output Data Register (MDIOS_DOUTR3), Address offset: 18Ch */ - __IO uint32_t DOUTR4; /*!< MDIOS Output Data Register (MDIOS_DOUTR4), Address offset: 190h */ - __IO uint32_t DOUTR5; /*!< MDIOS Output Data Register (MDIOS_DOUTR5), Address offset: 194h */ - __IO uint32_t DOUTR6; /*!< MDIOS Output Data Register (MDIOS_DOUTR6), Address offset: 198h */ - __IO uint32_t DOUTR7; /*!< MDIOS Output Data Register (MDIOS_DOUTR7), Address offset: 19Ch */ - __IO uint32_t DOUTR8; /*!< MDIOS Output Data Register (MDIOS_DOUTR8), Address offset: 1A0h */ - __IO uint32_t DOUTR9; /*!< MDIOS Output Data Register (MDIOS_DOUTR9), Address offset: 1A4h */ - __IO uint32_t DOUTR10; /*!< MDIOS Output Data Register (MDIOS_DOUTR10), Address offset: 1A8h */ - __IO uint32_t DOUTR11; /*!< MDIOS Output Data Register (MDIOS_DOUTR11), Address offset: 1ACh */ - __IO uint32_t DOUTR12; /*!< MDIOS Output Data Register (MDIOS_DOUTR12), Address offset: 1B0h */ - __IO uint32_t DOUTR13; /*!< MDIOS Output Data Register (MDIOS_DOUTR13), Address offset: 1B4h */ - __IO uint32_t DOUTR14; /*!< MDIOS Output Data Register (MDIOS_DOUTR14), Address offset: 1B8h */ - __IO uint32_t DOUTR15; /*!< MDIOS Output Data Register (MDIOS_DOUTR15), Address offset: 1BCh */ - __IO uint32_t DOUTR16; /*!< MDIOS Output Data Register (MDIOS_DOUTR16), Address offset: 1C0h */ - __IO uint32_t DOUTR17; /*!< MDIOS Output Data Register (MDIOS_DOUTR17), Address offset: 1C4h */ - __IO uint32_t DOUTR18; /*!< MDIOS Output Data Register (MDIOS_DOUTR18), Address offset: 1C8h */ - __IO uint32_t DOUTR19; /*!< MDIOS Output Data Register (MDIOS_DOUTR19), Address offset: 1CCh */ - __IO uint32_t DOUTR20; /*!< MDIOS Output Data Register (MDIOS_DOUTR20), Address offset: 1D0h */ - __IO uint32_t DOUTR21; /*!< MDIOS Output Data Register (MDIOS_DOUTR21), Address offset: 1D4h */ - __IO uint32_t DOUTR22; /*!< MDIOS Output Data Register (MDIOS_DOUTR22), Address offset: 1D8h */ - __IO uint32_t DOUTR23; /*!< MDIOS Output Data Register (MDIOS_DOUTR23), Address offset: 1DCh */ - __IO uint32_t DOUTR24; /*!< MDIOS Output Data Register (MDIOS_DOUTR24), Address offset: 1E0h */ - __IO uint32_t DOUTR25; /*!< MDIOS Output Data Register (MDIOS_DOUTR25), Address offset: 1E4h */ - __IO uint32_t DOUTR26; /*!< MDIOS Output Data Register (MDIOS_DOUTR26), Address offset: 1E8h */ - __IO uint32_t DOUTR27; /*!< MDIOS Output Data Register (MDIOS_DOUTR27), Address offset: 1ECh */ - __IO uint32_t DOUTR28; /*!< MDIOS Output Data Register (MDIOS_DOUTR28), Address offset: 1F0h */ - __IO uint32_t DOUTR29; /*!< MDIOS Output Data Register (MDIOS_DOUTR29), Address offset: 1F4h */ - __IO uint32_t DOUTR30; /*!< MDIOS Output Data Register (MDIOS_DOUTR30), Address offset: 1F8h */ - __IO uint32_t DOUTR31; /*!< MDIOS Output Data Register (MDIOS_DOUTR31), Address offset: 1FCh */ -} MDIOS_TypeDef; - - -/** @addtogroup Peripheral_memory_map - * @{ - */ -#define RAMITCM_BASE 0x00000000UL /*!< Base address of : 16KB RAM reserved for CPU execution/instruction accessible over ITCM */ -#define FLASHITCM_BASE 0x00200000UL /*!< Base address of : (up to 2 MB) embedded FLASH memory accessible over ITCM */ -#define FLASHAXI_BASE 0x08000000UL /*!< Base address of : (up to 2 MB) embedded FLASH memory accessible over AXI */ -#define RAMDTCM_BASE 0x20000000UL /*!< Base address of : 128KB system data RAM accessible over DTCM */ -#define PERIPH_BASE 0x40000000UL /*!< Base address of : AHB/ABP Peripherals */ -#define BKPSRAM_BASE 0x40024000UL /*!< Base address of : Backup SRAM(4 KB) */ -#define QSPI_BASE 0x90000000UL /*!< Base address of : QSPI memories accessible over AXI */ -#define FMC_R_BASE 0xA0000000UL /*!< Base address of : FMC Control registers */ -#define QSPI_R_BASE 0xA0001000UL /*!< Base address of : QSPI Control registers */ -#define SRAM1_BASE 0x20020000UL /*!< Base address of : 368KB RAM1 accessible over AXI/AHB */ -#define SRAM2_BASE 0x2007C000UL /*!< Base address of : 16KB RAM2 accessible over AXI/AHB */ -#define FLASH_END 0x081FFFFFUL /*!< FLASH end address */ -#define FLASH_OTP_BASE 0x1FF0F000UL /*!< Base address of : (up to 1024 Bytes) embedded FLASH OTP Area */ -#define FLASH_OTP_END 0x1FF0F41FUL /*!< End address of : (up to 1024 Bytes) embedded FLASH OTP Area */ - -/* Legacy define */ -#define FLASH_BASE FLASHAXI_BASE - -/*!< Peripheral memory map */ -#define APB1PERIPH_BASE PERIPH_BASE -#define APB2PERIPH_BASE (PERIPH_BASE + 0x00010000UL) -#define AHB1PERIPH_BASE (PERIPH_BASE + 0x00020000UL) -#define AHB2PERIPH_BASE (PERIPH_BASE + 0x10000000UL) - -/*!< APB1 peripherals */ -#define TIM2_BASE (APB1PERIPH_BASE + 0x0000UL) -#define TIM3_BASE (APB1PERIPH_BASE + 0x0400UL) -#define TIM4_BASE (APB1PERIPH_BASE + 0x0800UL) -#define TIM5_BASE (APB1PERIPH_BASE + 0x0C00UL) -#define TIM6_BASE (APB1PERIPH_BASE + 0x1000UL) -#define TIM7_BASE (APB1PERIPH_BASE + 0x1400UL) -#define TIM12_BASE (APB1PERIPH_BASE + 0x1800UL) -#define TIM13_BASE (APB1PERIPH_BASE + 0x1C00UL) -#define TIM14_BASE (APB1PERIPH_BASE + 0x2000UL) -#define LPTIM1_BASE (APB1PERIPH_BASE + 0x2400UL) -#define RTC_BASE (APB1PERIPH_BASE + 0x2800UL) -#define WWDG_BASE (APB1PERIPH_BASE + 0x2C00UL) -#define IWDG_BASE (APB1PERIPH_BASE + 0x3000UL) -#define CAN3_BASE (APB1PERIPH_BASE + 0x3400UL) -#define SPI2_BASE (APB1PERIPH_BASE + 0x3800UL) -#define SPI3_BASE (APB1PERIPH_BASE + 0x3C00UL) -#define SPDIFRX_BASE (APB1PERIPH_BASE + 0x4000UL) -#define USART2_BASE (APB1PERIPH_BASE + 0x4400UL) -#define USART3_BASE (APB1PERIPH_BASE + 0x4800UL) -#define UART4_BASE (APB1PERIPH_BASE + 0x4C00UL) -#define UART5_BASE (APB1PERIPH_BASE + 0x5000UL) -#define I2C1_BASE (APB1PERIPH_BASE + 0x5400UL) -#define I2C2_BASE (APB1PERIPH_BASE + 0x5800UL) -#define I2C3_BASE (APB1PERIPH_BASE + 0x5C00UL) -#define I2C4_BASE (APB1PERIPH_BASE + 0x6000UL) -#define CAN1_BASE (APB1PERIPH_BASE + 0x6400UL) -#define CAN2_BASE (APB1PERIPH_BASE + 0x6800UL) -#define CEC_BASE (APB1PERIPH_BASE + 0x6C00UL) -#define PWR_BASE (APB1PERIPH_BASE + 0x7000UL) -#define DAC_BASE (APB1PERIPH_BASE + 0x7400UL) -#define UART7_BASE (APB1PERIPH_BASE + 0x7800UL) -#define UART8_BASE (APB1PERIPH_BASE + 0x7C00UL) - -/*!< APB2 peripherals */ -#define TIM1_BASE (APB2PERIPH_BASE + 0x0000UL) -#define TIM8_BASE (APB2PERIPH_BASE + 0x0400UL) -#define USART1_BASE (APB2PERIPH_BASE + 0x1000UL) -#define USART6_BASE (APB2PERIPH_BASE + 0x1400UL) -#define SDMMC2_BASE (APB2PERIPH_BASE + 0x1C00UL) -#define ADC1_BASE (APB2PERIPH_BASE + 0x2000UL) -#define ADC2_BASE (APB2PERIPH_BASE + 0x2100UL) -#define ADC3_BASE (APB2PERIPH_BASE + 0x2200UL) -#define ADC_BASE (APB2PERIPH_BASE + 0x2300UL) -#define SDMMC1_BASE (APB2PERIPH_BASE + 0x2C00UL) -#define SPI1_BASE (APB2PERIPH_BASE + 0x3000UL) -#define SPI4_BASE (APB2PERIPH_BASE + 0x3400UL) -#define SYSCFG_BASE (APB2PERIPH_BASE + 0x3800UL) -#define EXTI_BASE (APB2PERIPH_BASE + 0x3C00UL) -#define TIM9_BASE (APB2PERIPH_BASE + 0x4000UL) -#define TIM10_BASE (APB2PERIPH_BASE + 0x4400UL) -#define TIM11_BASE (APB2PERIPH_BASE + 0x4800UL) -#define SPI5_BASE (APB2PERIPH_BASE + 0x5000UL) -#define SPI6_BASE (APB2PERIPH_BASE + 0x5400UL) -#define SAI1_BASE (APB2PERIPH_BASE + 0x5800UL) -#define SAI2_BASE (APB2PERIPH_BASE + 0x5C00UL) -#define SAI1_Block_A_BASE (SAI1_BASE + 0x004UL) -#define SAI1_Block_B_BASE (SAI1_BASE + 0x024UL) -#define SAI2_Block_A_BASE (SAI2_BASE + 0x004UL) -#define SAI2_Block_B_BASE (SAI2_BASE + 0x024UL) -#define LTDC_BASE (APB2PERIPH_BASE + 0x6800UL) -#define LTDC_Layer1_BASE (LTDC_BASE + 0x0084UL) -#define LTDC_Layer2_BASE (LTDC_BASE + 0x0104UL) -#define DFSDM1_BASE (APB2PERIPH_BASE + 0x7400UL) -#define DFSDM1_Channel0_BASE (DFSDM1_BASE + 0x00UL) -#define DFSDM1_Channel1_BASE (DFSDM1_BASE + 0x20UL) -#define DFSDM1_Channel2_BASE (DFSDM1_BASE + 0x40UL) -#define DFSDM1_Channel3_BASE (DFSDM1_BASE + 0x60UL) -#define DFSDM1_Channel4_BASE (DFSDM1_BASE + 0x80UL) -#define DFSDM1_Channel5_BASE (DFSDM1_BASE + 0xA0UL) -#define DFSDM1_Channel6_BASE (DFSDM1_BASE + 0xC0UL) -#define DFSDM1_Channel7_BASE (DFSDM1_BASE + 0xE0UL) -#define DFSDM1_Filter0_BASE (DFSDM1_BASE + 0x100UL) -#define DFSDM1_Filter1_BASE (DFSDM1_BASE + 0x180UL) -#define DFSDM1_Filter2_BASE (DFSDM1_BASE + 0x200UL) -#define DFSDM1_Filter3_BASE (DFSDM1_BASE + 0x280UL) -#define MDIOS_BASE (APB2PERIPH_BASE + 0x7800UL) -/*!< AHB1 peripherals */ -#define GPIOA_BASE (AHB1PERIPH_BASE + 0x0000UL) -#define GPIOB_BASE (AHB1PERIPH_BASE + 0x0400UL) -#define GPIOC_BASE (AHB1PERIPH_BASE + 0x0800UL) -#define GPIOD_BASE (AHB1PERIPH_BASE + 0x0C00UL) -#define GPIOE_BASE (AHB1PERIPH_BASE + 0x1000UL) -#define GPIOF_BASE (AHB1PERIPH_BASE + 0x1400UL) -#define GPIOG_BASE (AHB1PERIPH_BASE + 0x1800UL) -#define GPIOH_BASE (AHB1PERIPH_BASE + 0x1C00UL) -#define GPIOI_BASE (AHB1PERIPH_BASE + 0x2000UL) -#define GPIOJ_BASE (AHB1PERIPH_BASE + 0x2400UL) -#define GPIOK_BASE (AHB1PERIPH_BASE + 0x2800UL) -#define CRC_BASE (AHB1PERIPH_BASE + 0x3000UL) -#define RCC_BASE (AHB1PERIPH_BASE + 0x3800UL) -#define FLASH_R_BASE (AHB1PERIPH_BASE + 0x3C00UL) -#define UID_BASE 0x1FF0F420UL /*!< Unique device ID register base address */ -#define FLASHSIZE_BASE 0x1FF0F442UL /*!< FLASH Size register base address */ -#define PACKAGE_BASE 0x1FF0F7E0UL /*!< Package size register base address */ -/* Legacy define */ -#define PACKAGESIZE_BASE PACKAGE_BASE - -#define DMA1_BASE (AHB1PERIPH_BASE + 0x6000UL) -#define DMA1_Stream0_BASE (DMA1_BASE + 0x010UL) -#define DMA1_Stream1_BASE (DMA1_BASE + 0x028UL) -#define DMA1_Stream2_BASE (DMA1_BASE + 0x040UL) -#define DMA1_Stream3_BASE (DMA1_BASE + 0x058UL) -#define DMA1_Stream4_BASE (DMA1_BASE + 0x070UL) -#define DMA1_Stream5_BASE (DMA1_BASE + 0x088UL) -#define DMA1_Stream6_BASE (DMA1_BASE + 0x0A0UL) -#define DMA1_Stream7_BASE (DMA1_BASE + 0x0B8UL) -#define DMA2_BASE (AHB1PERIPH_BASE + 0x6400UL) -#define DMA2_Stream0_BASE (DMA2_BASE + 0x010UL) -#define DMA2_Stream1_BASE (DMA2_BASE + 0x028UL) -#define DMA2_Stream2_BASE (DMA2_BASE + 0x040UL) -#define DMA2_Stream3_BASE (DMA2_BASE + 0x058UL) -#define DMA2_Stream4_BASE (DMA2_BASE + 0x070UL) -#define DMA2_Stream5_BASE (DMA2_BASE + 0x088UL) -#define DMA2_Stream6_BASE (DMA2_BASE + 0x0A0UL) -#define DMA2_Stream7_BASE (DMA2_BASE + 0x0B8UL) -#define ETH_BASE (AHB1PERIPH_BASE + 0x8000UL) -#define ETH_MAC_BASE (ETH_BASE) -#define ETH_MMC_BASE (ETH_BASE + 0x0100UL) -#define ETH_PTP_BASE (ETH_BASE + 0x0700UL) -#define ETH_DMA_BASE (ETH_BASE + 0x1000UL) -#define DMA2D_BASE (AHB1PERIPH_BASE + 0xB000UL) -/*!< AHB2 peripherals */ -#define DCMI_BASE (AHB2PERIPH_BASE + 0x50000UL) -#define JPEG_BASE (AHB2PERIPH_BASE + 0x51000UL) -#define RNG_BASE (AHB2PERIPH_BASE + 0x60800UL) -/*!< FMC Bankx registers base address */ -#define FMC_Bank1_R_BASE (FMC_R_BASE + 0x0000UL) -#define FMC_Bank1E_R_BASE (FMC_R_BASE + 0x0104UL) -#define FMC_Bank3_R_BASE (FMC_R_BASE + 0x0080UL) -#define FMC_Bank5_6_R_BASE (FMC_R_BASE + 0x0140UL) - -/* Debug MCU registers base address */ -#define DBGMCU_BASE 0xE0042000UL - -/*!< USB registers base address */ -#define USB_OTG_HS_PERIPH_BASE 0x40040000UL -#define USB_OTG_FS_PERIPH_BASE 0x50000000UL - -#define USB_OTG_GLOBAL_BASE 0x0000UL -#define USB_OTG_DEVICE_BASE 0x0800UL -#define USB_OTG_IN_ENDPOINT_BASE 0x0900UL -#define USB_OTG_OUT_ENDPOINT_BASE 0x0B00UL -#define USB_OTG_EP_REG_SIZE 0x0020UL -#define USB_OTG_HOST_BASE 0x0400UL -#define USB_OTG_HOST_PORT_BASE 0x0440UL -#define USB_OTG_HOST_CHANNEL_BASE 0x0500UL -#define USB_OTG_HOST_CHANNEL_SIZE 0x0020UL -#define USB_OTG_PCGCCTL_BASE 0x0E00UL -#define USB_OTG_FIFO_BASE 0x1000UL -#define USB_OTG_FIFO_SIZE 0x1000UL - -/** - * @} - */ - -/** @addtogroup Peripheral_declaration - * @{ - */ -#define TIM2 ((TIM_TypeDef *) TIM2_BASE) -#define TIM3 ((TIM_TypeDef *) TIM3_BASE) -#define TIM4 ((TIM_TypeDef *) TIM4_BASE) -#define TIM5 ((TIM_TypeDef *) TIM5_BASE) -#define TIM6 ((TIM_TypeDef *) TIM6_BASE) -#define TIM7 ((TIM_TypeDef *) TIM7_BASE) -#define TIM12 ((TIM_TypeDef *) TIM12_BASE) -#define TIM13 ((TIM_TypeDef *) TIM13_BASE) -#define TIM14 ((TIM_TypeDef *) TIM14_BASE) -#define LPTIM1 ((LPTIM_TypeDef *) LPTIM1_BASE) -#define RTC ((RTC_TypeDef *) RTC_BASE) -#define WWDG ((WWDG_TypeDef *) WWDG_BASE) -#define IWDG ((IWDG_TypeDef *) IWDG_BASE) -#define SPI2 ((SPI_TypeDef *) SPI2_BASE) -#define SPI3 ((SPI_TypeDef *) SPI3_BASE) -#define SPDIFRX ((SPDIFRX_TypeDef *) SPDIFRX_BASE) -#define USART2 ((USART_TypeDef *) USART2_BASE) -#define USART3 ((USART_TypeDef *) USART3_BASE) -#define UART4 ((USART_TypeDef *) UART4_BASE) -#define UART5 ((USART_TypeDef *) UART5_BASE) -#define I2C1 ((I2C_TypeDef *) I2C1_BASE) -#define I2C2 ((I2C_TypeDef *) I2C2_BASE) -#define I2C3 ((I2C_TypeDef *) I2C3_BASE) -#define I2C4 ((I2C_TypeDef *) I2C4_BASE) -#define CAN1 ((CAN_TypeDef *) CAN1_BASE) -#define CAN2 ((CAN_TypeDef *) CAN2_BASE) -#define CEC ((CEC_TypeDef *) CEC_BASE) -#define PWR ((PWR_TypeDef *) PWR_BASE) -#define DAC1 ((DAC_TypeDef *) DAC_BASE) -#define DAC ((DAC_TypeDef *) DAC_BASE) /* Kept for legacy purpose */ -#define UART7 ((USART_TypeDef *) UART7_BASE) -#define UART8 ((USART_TypeDef *) UART8_BASE) -#define TIM1 ((TIM_TypeDef *) TIM1_BASE) -#define TIM8 ((TIM_TypeDef *) TIM8_BASE) -#define USART1 ((USART_TypeDef *) USART1_BASE) -#define USART6 ((USART_TypeDef *) USART6_BASE) -#define ADC ((ADC_Common_TypeDef *) ADC_BASE) -#define ADC1 ((ADC_TypeDef *) ADC1_BASE) -#define ADC2 ((ADC_TypeDef *) ADC2_BASE) -#define ADC3 ((ADC_TypeDef *) ADC3_BASE) -#define ADC123_COMMON ((ADC_Common_TypeDef *) ADC_BASE) -#define SDMMC1 ((SDMMC_TypeDef *) SDMMC1_BASE) -#define SPI1 ((SPI_TypeDef *) SPI1_BASE) -#define SPI4 ((SPI_TypeDef *) SPI4_BASE) -#define SYSCFG ((SYSCFG_TypeDef *) SYSCFG_BASE) -#define EXTI ((EXTI_TypeDef *) EXTI_BASE) -#define TIM9 ((TIM_TypeDef *) TIM9_BASE) -#define TIM10 ((TIM_TypeDef *) TIM10_BASE) -#define TIM11 ((TIM_TypeDef *) TIM11_BASE) -#define SPI5 ((SPI_TypeDef *) SPI5_BASE) -#define SPI6 ((SPI_TypeDef *) SPI6_BASE) -#define SAI1 ((SAI_TypeDef *) SAI1_BASE) -#define SAI2 ((SAI_TypeDef *) SAI2_BASE) -#define SAI1_Block_A ((SAI_Block_TypeDef *)SAI1_Block_A_BASE) -#define SAI1_Block_B ((SAI_Block_TypeDef *)SAI1_Block_B_BASE) -#define SAI2_Block_A ((SAI_Block_TypeDef *)SAI2_Block_A_BASE) -#define SAI2_Block_B ((SAI_Block_TypeDef *)SAI2_Block_B_BASE) -#define LTDC ((LTDC_TypeDef *)LTDC_BASE) -#define LTDC_Layer1 ((LTDC_Layer_TypeDef *)LTDC_Layer1_BASE) -#define LTDC_Layer2 ((LTDC_Layer_TypeDef *)LTDC_Layer2_BASE) -#define GPIOA ((GPIO_TypeDef *) GPIOA_BASE) -#define GPIOB ((GPIO_TypeDef *) GPIOB_BASE) -#define GPIOC ((GPIO_TypeDef *) GPIOC_BASE) -#define GPIOD ((GPIO_TypeDef *) GPIOD_BASE) -#define GPIOE ((GPIO_TypeDef *) GPIOE_BASE) -#define GPIOF ((GPIO_TypeDef *) GPIOF_BASE) -#define GPIOG ((GPIO_TypeDef *) GPIOG_BASE) -#define GPIOH ((GPIO_TypeDef *) GPIOH_BASE) -#define GPIOI ((GPIO_TypeDef *) GPIOI_BASE) -#define GPIOJ ((GPIO_TypeDef *) GPIOJ_BASE) -#define GPIOK ((GPIO_TypeDef *) GPIOK_BASE) -#define CRC ((CRC_TypeDef *) CRC_BASE) -#define RCC ((RCC_TypeDef *) RCC_BASE) -#define FLASH ((FLASH_TypeDef *) FLASH_R_BASE) -#define DMA1 ((DMA_TypeDef *) DMA1_BASE) -#define DMA1_Stream0 ((DMA_Stream_TypeDef *) DMA1_Stream0_BASE) -#define DMA1_Stream1 ((DMA_Stream_TypeDef *) DMA1_Stream1_BASE) -#define DMA1_Stream2 ((DMA_Stream_TypeDef *) DMA1_Stream2_BASE) -#define DMA1_Stream3 ((DMA_Stream_TypeDef *) DMA1_Stream3_BASE) -#define DMA1_Stream4 ((DMA_Stream_TypeDef *) DMA1_Stream4_BASE) -#define DMA1_Stream5 ((DMA_Stream_TypeDef *) DMA1_Stream5_BASE) -#define DMA1_Stream6 ((DMA_Stream_TypeDef *) DMA1_Stream6_BASE) -#define DMA1_Stream7 ((DMA_Stream_TypeDef *) DMA1_Stream7_BASE) -#define DMA2 ((DMA_TypeDef *) DMA2_BASE) -#define DMA2_Stream0 ((DMA_Stream_TypeDef *) DMA2_Stream0_BASE) -#define DMA2_Stream1 ((DMA_Stream_TypeDef *) DMA2_Stream1_BASE) -#define DMA2_Stream2 ((DMA_Stream_TypeDef *) DMA2_Stream2_BASE) -#define DMA2_Stream3 ((DMA_Stream_TypeDef *) DMA2_Stream3_BASE) -#define DMA2_Stream4 ((DMA_Stream_TypeDef *) DMA2_Stream4_BASE) -#define DMA2_Stream5 ((DMA_Stream_TypeDef *) DMA2_Stream5_BASE) -#define DMA2_Stream6 ((DMA_Stream_TypeDef *) DMA2_Stream6_BASE) -#define DMA2_Stream7 ((DMA_Stream_TypeDef *) DMA2_Stream7_BASE) -#define ETH ((ETH_TypeDef *) ETH_BASE) -#define DMA2D ((DMA2D_TypeDef *)DMA2D_BASE) -#define DCMI ((DCMI_TypeDef *) DCMI_BASE) -#define RNG ((RNG_TypeDef *) RNG_BASE) -#define FMC_Bank1 ((FMC_Bank1_TypeDef *) FMC_Bank1_R_BASE) -#define FMC_Bank1E ((FMC_Bank1E_TypeDef *) FMC_Bank1E_R_BASE) -#define FMC_Bank3 ((FMC_Bank3_TypeDef *) FMC_Bank3_R_BASE) -#define FMC_Bank5_6 ((FMC_Bank5_6_TypeDef *) FMC_Bank5_6_R_BASE) -#define QUADSPI ((QUADSPI_TypeDef *) QSPI_R_BASE) -#define DBGMCU ((DBGMCU_TypeDef *) DBGMCU_BASE) -#define USB_OTG_FS ((USB_OTG_GlobalTypeDef *) USB_OTG_FS_PERIPH_BASE) -#define USB_OTG_HS ((USB_OTG_GlobalTypeDef *) USB_OTG_HS_PERIPH_BASE) -#define CAN3 ((CAN_TypeDef *) CAN3_BASE) -#define SDMMC2 ((SDMMC_TypeDef *) SDMMC2_BASE) -#define MDIOS ((MDIOS_TypeDef *) MDIOS_BASE) -#define DFSDM1_Channel0 ((DFSDM_Channel_TypeDef *) DFSDM1_Channel0_BASE) -#define DFSDM1_Channel1 ((DFSDM_Channel_TypeDef *) DFSDM1_Channel1_BASE) -#define DFSDM1_Channel2 ((DFSDM_Channel_TypeDef *) DFSDM1_Channel2_BASE) -#define DFSDM1_Channel3 ((DFSDM_Channel_TypeDef *) DFSDM1_Channel3_BASE) -#define DFSDM1_Channel4 ((DFSDM_Channel_TypeDef *) DFSDM1_Channel4_BASE) -#define DFSDM1_Channel5 ((DFSDM_Channel_TypeDef *) DFSDM1_Channel5_BASE) -#define DFSDM1_Channel6 ((DFSDM_Channel_TypeDef *) DFSDM1_Channel6_BASE) -#define DFSDM1_Channel7 ((DFSDM_Channel_TypeDef *) DFSDM1_Channel7_BASE) -#define DFSDM1_Filter0 ((DFSDM_Filter_TypeDef *) DFSDM1_Filter0_BASE) -#define DFSDM1_Filter1 ((DFSDM_Filter_TypeDef *) DFSDM1_Filter1_BASE) -#define DFSDM1_Filter2 ((DFSDM_Filter_TypeDef *) DFSDM1_Filter2_BASE) -#define DFSDM1_Filter3 ((DFSDM_Filter_TypeDef *) DFSDM1_Filter3_BASE) -#define JPEG ((JPEG_TypeDef *) JPEG_BASE) - -/** - * @} - */ - -/** @addtogroup Exported_constants - * @{ - */ - - /** @addtogroup Peripheral_Registers_Bits_Definition - * @{ - */ - -/******************************************************************************/ -/* Peripheral Registers_Bits_Definition */ -/******************************************************************************/ - -/******************************************************************************/ -/* */ -/* Analog to Digital Converter */ -/* */ -/******************************************************************************/ -/******************** Bit definition for ADC_SR register ********************/ -#define ADC_SR_AWD_Pos (0U) -#define ADC_SR_AWD_Msk (0x1UL << ADC_SR_AWD_Pos) /*!< 0x00000001 */ -#define ADC_SR_AWD ADC_SR_AWD_Msk /*!
© COPYRIGHT(c) 2016 STMicroelectronics
- * - * Redistribution and use in source and binary forms, with or without modification, - * are permitted provided that the following conditions are met: - * 1. Redistributions of source code must retain the above copyright notice, - * this list of conditions and the following disclaimer. - * 2. Redistributions in binary form must reproduce the above copyright notice, - * this list of conditions and the following disclaimer in the documentation - * and/or other materials provided with the distribution. - * 3. Neither the name of STMicroelectronics nor the names of its contributors - * may be used to endorse or promote products derived from this software - * without specific prior written permission. - * - * THIS SOFTWARE IS PROVIDED BY THE COPYRIGHT HOLDERS AND CONTRIBUTORS "AS IS" - * AND ANY EXPRESS OR IMPLIED WARRANTIES, INCLUDING, BUT NOT LIMITED TO, THE - * IMPLIED WARRANTIES OF MERCHANTABILITY AND FITNESS FOR A PARTICULAR PURPOSE ARE - * DISCLAIMED. IN NO EVENT SHALL THE COPYRIGHT HOLDER OR CONTRIBUTORS BE LIABLE - * FOR ANY DIRECT, INDIRECT, INCIDENTAL, SPECIAL, EXEMPLARY, OR CONSEQUENTIAL - * DAMAGES (INCLUDING, BUT NOT LIMITED TO, PROCUREMENT OF SUBSTITUTE GOODS OR - * SERVICES; LOSS OF USE, DATA, OR PROFITS; OR BUSINESS INTERRUPTION) HOWEVER - * CAUSED AND ON ANY THEORY OF LIABILITY, WHETHER IN CONTRACT, STRICT LIABILITY, - * OR TORT (INCLUDING NEGLIGENCE OR OTHERWISE) ARISING IN ANY WAY OUT OF THE USE - * OF THIS SOFTWARE, EVEN IF ADVISED OF THE POSSIBILITY OF SUCH DAMAGE. - * - ****************************************************************************** - */ - -/** @addtogroup CMSIS - * @{ - */ - -/** @addtogroup stm32f7xx - * @{ - */ - -#ifndef __STM32F7xx_H -#define __STM32F7xx_H - -#ifdef __cplusplus - extern "C" { -#endif /* __cplusplus */ - -/** @addtogroup Library_configuration_section - * @{ - */ - -/** - * @brief STM32 Family - */ -#if !defined (STM32F7) -#define STM32F7 -#endif /* STM32F7 */ - -/* Uncomment the line below according to the target STM32 device used in your - application - */ -#if !defined (STM32F756xx) && !defined (STM32F746xx) && !defined (STM32F745xx) && !defined (STM32F767xx) && \ - !defined (STM32F769xx) && !defined (STM32F777xx) && !defined (STM32F779xx) && !defined (STM32F722xx) && \ - !defined (STM32F723xx) && !defined (STM32F732xx) && !defined (STM32F733xx) && !defined (STM32F730xx) && \ - !defined (STM32F750xx) - - /* #define STM32F756xx */ /*!< STM32F756VG, STM32F756ZG, STM32F756ZG, STM32F756IG, STM32F756BG, - STM32F756NG Devices */ - /* #define STM32F746xx */ /*!< STM32F746VE, STM32F746VG, STM32F746ZE, STM32F746ZG, STM32F746IE, STM32F746IG, - STM32F746BE, STM32F746BG, STM32F746NE, STM32F746NG Devices */ - /* #define STM32F745xx */ /*!< STM32F745VE, STM32F745VG, STM32F745ZG, STM32F745ZE, STM32F745IE, STM32F745IG Devices */ - /* #define STM32F765xx */ /*!< STM32F765BI, STM32F765BG, STM32F765NI, STM32F765NG, STM32F765II, STM32F765IG, - STM32F765ZI, STM32F765ZG, STM32F765VI, STM32F765VG Devices */ - /* #define STM32F767xx */ /*!< STM32F767BG, STM32F767BI, STM32F767IG, STM32F767II, STM32F767NG, STM32F767NI, - STM32F767VG, STM32F767VI, STM32F767ZG, STM32F767ZI Devices */ - /* #define STM32F769xx */ /*!< STM32F769AG, STM32F769AI, STM32F769BG, STM32F769BI, STM32F769IG, STM32F769II, - STM32F769NG, STM32F769NI, STM32F768AI Devices */ - /* #define STM32F777xx */ /*!< STM32F777VI, STM32F777ZI, STM32F777II, STM32F777BI, STM32F777NI Devices */ - /* #define STM32F779xx */ /*!< STM32F779II, STM32F779BI, STM32F779NI, STM32F779AI, STM32F778AI Devices */ - /* #define STM32F722xx */ /*!< STM32F722IE, STM32F722ZE, STM32F722VE, STM32F722RE, STM32F722IC, STM32F722ZC, - STM32F722VC, STM32F722RC Devices */ - /* #define STM32F723xx */ /*!< STM32F723IE, STM32F723ZE, STM32F723VE, STM32F723IC, STM32F723ZC, STM32F723VC Devices */ - /* #define STM32F732xx */ /*!< STM32F732IE, STM32F732ZE, STM32F732VE, STM32F732RE Devices */ - /* #define STM32F733xx */ /*!< STM32F733IE, STM32F733ZE, STM32F733VE Devices */ - /* #define STM32F730xx */ /*!< STM32F730R, STM32F730V, STM32F730Z, STM32F730I Devices */ - /* #define STM32F750xx */ /*!< STM32F750V, STM32F750Z, STM32F750N Devices */ -#endif - -/* Tip: To avoid modifying this file each time you need to switch between these - devices, you can define the device in your toolchain compiler preprocessor. - */ - -#if !defined (USE_HAL_DRIVER) -/** - * @brief Comment the line below if you will not use the peripherals drivers. - In this case, these drivers will not be included and the application code will - be based on direct access to peripherals registers - */ - /*#define USE_HAL_DRIVER */ -#endif /* USE_HAL_DRIVER */ - -/** - * @brief CMSIS Device version number V1.2.4 - */ -#define __STM32F7_CMSIS_VERSION_MAIN (0x01) /*!< [31:24] main version */ -#define __STM32F7_CMSIS_VERSION_SUB1 (0x02) /*!< [23:16] sub1 version */ -#define __STM32F7_CMSIS_VERSION_SUB2 (0x04) /*!< [15:8] sub2 version */ -#define __STM32F7_CMSIS_VERSION_RC (0x00) /*!< [7:0] release candidate */ -#define __STM32F7_CMSIS_VERSION ((__STM32F7_CMSIS_VERSION_MAIN << 24)\ - |(__STM32F7_CMSIS_VERSION_SUB1 << 16)\ - |(__STM32F7_CMSIS_VERSION_SUB2 << 8 )\ - |(__STM32F7_CMSIS_VERSION_RC)) -/** - * @} - */ - -/** @addtogroup Device_Included - * @{ - */ -#if defined(STM32F722xx) - #include "stm32f722xx.h" -#elif defined(STM32F723xx) - #include "stm32f723xx.h" -#elif defined(STM32F732xx) - #include "stm32f732xx.h" -#elif defined(STM32F733xx) - #include "stm32f733xx.h" -#elif defined(STM32F756xx) - #include "stm32f756xx.h" -#elif defined(STM32F746xx) - #include "stm32f746xx.h" -#elif defined(STM32F745xx) - #include "stm32f745xx.h" -#elif defined(STM32F765xx) - #include "stm32f765xx.h" -#elif defined(STM32F767xx) - #include "stm32f767xx.h" -#elif defined(STM32F769xx) - #include "stm32f769xx.h" -#elif defined(STM32F777xx) - #include "stm32f777xx.h" -#elif defined(STM32F779xx) - #include "stm32f779xx.h" -#elif defined(STM32F730xx) - #include "stm32f730xx.h" -#elif defined(STM32F750xx) - #include "stm32f750xx.h" -#else - #error "Please select first the target STM32F7xx device used in your application (in stm32f7xx.h file)" -#endif - -/** - * @} - */ - -/** @addtogroup Exported_types - * @{ - */ -typedef enum -{ - RESET = 0U, - SET = !RESET -} FlagStatus, ITStatus; - -typedef enum -{ - DISABLE = 0U, - ENABLE = !DISABLE -} FunctionalState; -#define IS_FUNCTIONAL_STATE(STATE) (((STATE) == DISABLE) || ((STATE) == ENABLE)) - -typedef enum -{ - SUCCESS = 0U, - ERROR = !SUCCESS -} ErrorStatus; - -/** - * @} - */ - -/** @addtogroup Exported_macro - * @{ - */ -#define SET_BIT(REG, BIT) ((REG) |= (BIT)) - -#define CLEAR_BIT(REG, BIT) ((REG) &= ~(BIT)) - -#define READ_BIT(REG, BIT) ((REG) & (BIT)) - -#define CLEAR_REG(REG) ((REG) = (0x0)) - -#define WRITE_REG(REG, VAL) ((REG) = (VAL)) - -#define READ_REG(REG) ((REG)) - -#define MODIFY_REG(REG, CLEARMASK, SETMASK) WRITE_REG((REG), (((READ_REG(REG)) & (~(CLEARMASK))) | (SETMASK))) - -#define POSITION_VAL(VAL) (__CLZ(__RBIT(VAL))) - -/** - * @} - */ - -#ifdef USE_HAL_DRIVER - #include "stm32f7xx_hal.h" -#endif /* USE_HAL_DRIVER */ - -#ifdef __cplusplus -} -#endif /* __cplusplus */ - -#endif /* __STM32F7xx_H */ - -/** - * @} - */ - -/** - * @} - */ - -/************************ (C) COPYRIGHT STMicroelectronics *****END OF FILE****/ diff --git a/test_dma/Drivers/CMSIS/Device/ST/STM32F7xx/Include/system_stm32f7xx.h b/test_dma/Drivers/CMSIS/Device/ST/STM32F7xx/Include/system_stm32f7xx.h deleted file mode 100644 index 126ac71..0000000 --- a/test_dma/Drivers/CMSIS/Device/ST/STM32F7xx/Include/system_stm32f7xx.h +++ /dev/null @@ -1,123 +0,0 @@ -/** - ****************************************************************************** - * @file system_stm32f7xx.h - * @author MCD Application Team - * @brief CMSIS Cortex-M7 Device System Source File for STM32F7xx devices. - ****************************************************************************** - * @attention - * - *

© COPYRIGHT(c) 2016 STMicroelectronics

- * - * Redistribution and use in source and binary forms, with or without modification, - * are permitted provided that the following conditions are met: - * 1. Redistributions of source code must retain the above copyright notice, - * this list of conditions and the following disclaimer. - * 2. Redistributions in binary form must reproduce the above copyright notice, - * this list of conditions and the following disclaimer in the documentation - * and/or other materials provided with the distribution. - * 3. Neither the name of STMicroelectronics nor the names of its contributors - * may be used to endorse or promote products derived from this software - * without specific prior written permission. - * - * THIS SOFTWARE IS PROVIDED BY THE COPYRIGHT HOLDERS AND CONTRIBUTORS "AS IS" - * AND ANY EXPRESS OR IMPLIED WARRANTIES, INCLUDING, BUT NOT LIMITED TO, THE - * IMPLIED WARRANTIES OF MERCHANTABILITY AND FITNESS FOR A PARTICULAR PURPOSE ARE - * DISCLAIMED. IN NO EVENT SHALL THE COPYRIGHT HOLDER OR CONTRIBUTORS BE LIABLE - * FOR ANY DIRECT, INDIRECT, INCIDENTAL, SPECIAL, EXEMPLARY, OR CONSEQUENTIAL - * DAMAGES (INCLUDING, BUT NOT LIMITED TO, PROCUREMENT OF SUBSTITUTE GOODS OR - * SERVICES; LOSS OF USE, DATA, OR PROFITS; OR BUSINESS INTERRUPTION) HOWEVER - * CAUSED AND ON ANY THEORY OF LIABILITY, WHETHER IN CONTRACT, STRICT LIABILITY, - * OR TORT (INCLUDING NEGLIGENCE OR OTHERWISE) ARISING IN ANY WAY OUT OF THE USE - * OF THIS SOFTWARE, EVEN IF ADVISED OF THE POSSIBILITY OF SUCH DAMAGE. - * - ****************************************************************************** - */ - -/** @addtogroup CMSIS - * @{ - */ - -/** @addtogroup stm32f7xx_system - * @{ - */ - -/** - * @brief Define to prevent recursive inclusion - */ -#ifndef __SYSTEM_STM32F7XX_H -#define __SYSTEM_STM32F7XX_H - -#ifdef __cplusplus - extern "C" { -#endif - -/** @addtogroup STM32F7xx_System_Includes - * @{ - */ - -/** - * @} - */ - - -/** @addtogroup STM32F7xx_System_Exported_Variables - * @{ - */ - /* The SystemCoreClock variable is updated in three ways: - 1) by calling CMSIS function SystemCoreClockUpdate() - 2) by calling HAL API function HAL_RCC_GetSysClockFreq() - 3) each time HAL_RCC_ClockConfig() is called to configure the system clock frequency - Note: If you use this function to configure the system clock; then there - is no need to call the 2 first functions listed above, since SystemCoreClock - variable is updated automatically. - */ -extern uint32_t SystemCoreClock; /*!< System Clock Frequency (Core Clock) */ - -extern const uint8_t AHBPrescTable[16]; /*!< AHB prescalers table values */ -extern const uint8_t APBPrescTable[8]; /*!< APB prescalers table values */ - - -/** - * @} - */ - -/** @addtogroup STM32F7xx_System_Exported_Constants - * @{ - */ - -/** - * @} - */ - -/** @addtogroup STM32F7xx_System_Exported_Macros - * @{ - */ - -/** - * @} - */ - -/** @addtogroup STM32F7xx_System_Exported_Functions - * @{ - */ - -extern void SystemInit(void); -extern void SystemCoreClockUpdate(void); -/** - * @} - */ - -#ifdef __cplusplus -} -#endif - -#endif /*__SYSTEM_STM32F7XX_H */ - -/** - * @} - */ - -/** - * @} - */ -/************************ (C) COPYRIGHT STMicroelectronics *****END OF FILE****/ diff --git a/test_dma/Drivers/CMSIS/Include/cmsis_armcc.h b/test_dma/Drivers/CMSIS/Include/cmsis_armcc.h deleted file mode 100644 index 7d751fb..0000000 --- a/test_dma/Drivers/CMSIS/Include/cmsis_armcc.h +++ /dev/null @@ -1,865 +0,0 @@ -/**************************************************************************//** - * @file cmsis_armcc.h - * @brief CMSIS compiler ARMCC (Arm Compiler 5) header file - * @version V5.0.4 - * @date 10. January 2018 - ******************************************************************************/ -/* - * Copyright (c) 2009-2018 Arm Limited. All rights reserved. - * - * SPDX-License-Identifier: Apache-2.0 - * - * Licensed under the Apache License, Version 2.0 (the License); you may - * not use this file except in compliance with the License. - * You may obtain a copy of the License at - * - * www.apache.org/licenses/LICENSE-2.0 - * - * Unless required by applicable law or agreed to in writing, software - * distributed under the License is distributed on an AS IS BASIS, WITHOUT - * WARRANTIES OR CONDITIONS OF ANY KIND, either express or implied. - * See the License for the specific language governing permissions and - * limitations under the License. - */ - -#ifndef __CMSIS_ARMCC_H -#define __CMSIS_ARMCC_H - - -#if defined(__ARMCC_VERSION) && (__ARMCC_VERSION < 400677) - #error "Please use Arm Compiler Toolchain V4.0.677 or later!" -#endif - -/* CMSIS compiler control architecture macros */ -#if ((defined (__TARGET_ARCH_6_M ) && (__TARGET_ARCH_6_M == 1)) || \ - (defined (__TARGET_ARCH_6S_M ) && (__TARGET_ARCH_6S_M == 1)) ) - #define __ARM_ARCH_6M__ 1 -#endif - -#if (defined (__TARGET_ARCH_7_M ) && (__TARGET_ARCH_7_M == 1)) - #define __ARM_ARCH_7M__ 1 -#endif - -#if (defined (__TARGET_ARCH_7E_M) && (__TARGET_ARCH_7E_M == 1)) - #define __ARM_ARCH_7EM__ 1 -#endif - - /* __ARM_ARCH_8M_BASE__ not applicable */ - /* __ARM_ARCH_8M_MAIN__ not applicable */ - - -/* CMSIS compiler specific defines */ -#ifndef __ASM - #define __ASM __asm -#endif -#ifndef __INLINE - #define __INLINE __inline -#endif -#ifndef __STATIC_INLINE - #define __STATIC_INLINE static __inline -#endif -#ifndef __STATIC_FORCEINLINE - #define __STATIC_FORCEINLINE static __forceinline -#endif -#ifndef __NO_RETURN - #define __NO_RETURN __declspec(noreturn) -#endif -#ifndef __USED - #define __USED __attribute__((used)) -#endif -#ifndef __WEAK - #define __WEAK __attribute__((weak)) -#endif -#ifndef __PACKED - #define __PACKED __attribute__((packed)) -#endif -#ifndef __PACKED_STRUCT - #define __PACKED_STRUCT __packed struct -#endif -#ifndef __PACKED_UNION - #define __PACKED_UNION __packed union -#endif -#ifndef __UNALIGNED_UINT32 /* deprecated */ - #define __UNALIGNED_UINT32(x) (*((__packed uint32_t *)(x))) -#endif -#ifndef __UNALIGNED_UINT16_WRITE - #define __UNALIGNED_UINT16_WRITE(addr, val) ((*((__packed uint16_t *)(addr))) = (val)) -#endif -#ifndef __UNALIGNED_UINT16_READ - #define __UNALIGNED_UINT16_READ(addr) (*((const __packed uint16_t *)(addr))) -#endif -#ifndef __UNALIGNED_UINT32_WRITE - #define __UNALIGNED_UINT32_WRITE(addr, val) ((*((__packed uint32_t *)(addr))) = (val)) -#endif -#ifndef __UNALIGNED_UINT32_READ - #define __UNALIGNED_UINT32_READ(addr) (*((const __packed uint32_t *)(addr))) -#endif -#ifndef __ALIGNED - #define __ALIGNED(x) __attribute__((aligned(x))) -#endif -#ifndef __RESTRICT - #define __RESTRICT __restrict -#endif - -/* ########################### Core Function Access ########################### */ -/** \ingroup CMSIS_Core_FunctionInterface - \defgroup CMSIS_Core_RegAccFunctions CMSIS Core Register Access Functions - @{ - */ - -/** - \brief Enable IRQ Interrupts - \details Enables IRQ interrupts by clearing the I-bit in the CPSR. - Can only be executed in Privileged modes. - */ -/* intrinsic void __enable_irq(); */ - - -/** - \brief Disable IRQ Interrupts - \details Disables IRQ interrupts by setting the I-bit in the CPSR. - Can only be executed in Privileged modes. - */ -/* intrinsic void __disable_irq(); */ - -/** - \brief Get Control Register - \details Returns the content of the Control Register. - \return Control Register value - */ -__STATIC_INLINE uint32_t __get_CONTROL(void) -{ - register uint32_t __regControl __ASM("control"); - return(__regControl); -} - - -/** - \brief Set Control Register - \details Writes the given value to the Control Register. - \param [in] control Control Register value to set - */ -__STATIC_INLINE void __set_CONTROL(uint32_t control) -{ - register uint32_t __regControl __ASM("control"); - __regControl = control; -} - - -/** - \brief Get IPSR Register - \details Returns the content of the IPSR Register. - \return IPSR Register value - */ -__STATIC_INLINE uint32_t __get_IPSR(void) -{ - register uint32_t __regIPSR __ASM("ipsr"); - return(__regIPSR); -} - - -/** - \brief Get APSR Register - \details Returns the content of the APSR Register. - \return APSR Register value - */ -__STATIC_INLINE uint32_t __get_APSR(void) -{ - register uint32_t __regAPSR __ASM("apsr"); - return(__regAPSR); -} - - -/** - \brief Get xPSR Register - \details Returns the content of the xPSR Register. - \return xPSR Register value - */ -__STATIC_INLINE uint32_t __get_xPSR(void) -{ - register uint32_t __regXPSR __ASM("xpsr"); - return(__regXPSR); -} - - -/** - \brief Get Process Stack Pointer - \details Returns the current value of the Process Stack Pointer (PSP). - \return PSP Register value - */ -__STATIC_INLINE uint32_t __get_PSP(void) -{ - register uint32_t __regProcessStackPointer __ASM("psp"); - return(__regProcessStackPointer); -} - - -/** - \brief Set Process Stack Pointer - \details Assigns the given value to the Process Stack Pointer (PSP). - \param [in] topOfProcStack Process Stack Pointer value to set - */ -__STATIC_INLINE void __set_PSP(uint32_t topOfProcStack) -{ - register uint32_t __regProcessStackPointer __ASM("psp"); - __regProcessStackPointer = topOfProcStack; -} - - -/** - \brief Get Main Stack Pointer - \details Returns the current value of the Main Stack Pointer (MSP). - \return MSP Register value - */ -__STATIC_INLINE uint32_t __get_MSP(void) -{ - register uint32_t __regMainStackPointer __ASM("msp"); - return(__regMainStackPointer); -} - - -/** - \brief Set Main Stack Pointer - \details Assigns the given value to the Main Stack Pointer (MSP). - \param [in] topOfMainStack Main Stack Pointer value to set - */ -__STATIC_INLINE void __set_MSP(uint32_t topOfMainStack) -{ - register uint32_t __regMainStackPointer __ASM("msp"); - __regMainStackPointer = topOfMainStack; -} - - -/** - \brief Get Priority Mask - \details Returns the current state of the priority mask bit from the Priority Mask Register. - \return Priority Mask value - */ -__STATIC_INLINE uint32_t __get_PRIMASK(void) -{ - register uint32_t __regPriMask __ASM("primask"); - return(__regPriMask); -} - - -/** - \brief Set Priority Mask - \details Assigns the given value to the Priority Mask Register. - \param [in] priMask Priority Mask - */ -__STATIC_INLINE void __set_PRIMASK(uint32_t priMask) -{ - register uint32_t __regPriMask __ASM("primask"); - __regPriMask = (priMask); -} - - -#if ((defined (__ARM_ARCH_7M__ ) && (__ARM_ARCH_7M__ == 1)) || \ - (defined (__ARM_ARCH_7EM__) && (__ARM_ARCH_7EM__ == 1)) ) - -/** - \brief Enable FIQ - \details Enables FIQ interrupts by clearing the F-bit in the CPSR. - Can only be executed in Privileged modes. - */ -#define __enable_fault_irq __enable_fiq - - -/** - \brief Disable FIQ - \details Disables FIQ interrupts by setting the F-bit in the CPSR. - Can only be executed in Privileged modes. - */ -#define __disable_fault_irq __disable_fiq - - -/** - \brief Get Base Priority - \details Returns the current value of the Base Priority register. - \return Base Priority register value - */ -__STATIC_INLINE uint32_t __get_BASEPRI(void) -{ - register uint32_t __regBasePri __ASM("basepri"); - return(__regBasePri); -} - - -/** - \brief Set Base Priority - \details Assigns the given value to the Base Priority register. - \param [in] basePri Base Priority value to set - */ -__STATIC_INLINE void __set_BASEPRI(uint32_t basePri) -{ - register uint32_t __regBasePri __ASM("basepri"); - __regBasePri = (basePri & 0xFFU); -} - - -/** - \brief Set Base Priority with condition - \details Assigns the given value to the Base Priority register only if BASEPRI masking is disabled, - or the new value increases the BASEPRI priority level. - \param [in] basePri Base Priority value to set - */ -__STATIC_INLINE void __set_BASEPRI_MAX(uint32_t basePri) -{ - register uint32_t __regBasePriMax __ASM("basepri_max"); - __regBasePriMax = (basePri & 0xFFU); -} - - -/** - \brief Get Fault Mask - \details Returns the current value of the Fault Mask register. - \return Fault Mask register value - */ -__STATIC_INLINE uint32_t __get_FAULTMASK(void) -{ - register uint32_t __regFaultMask __ASM("faultmask"); - return(__regFaultMask); -} - - -/** - \brief Set Fault Mask - \details Assigns the given value to the Fault Mask register. - \param [in] faultMask Fault Mask value to set - */ -__STATIC_INLINE void __set_FAULTMASK(uint32_t faultMask) -{ - register uint32_t __regFaultMask __ASM("faultmask"); - __regFaultMask = (faultMask & (uint32_t)1U); -} - -#endif /* ((defined (__ARM_ARCH_7M__ ) && (__ARM_ARCH_7M__ == 1)) || \ - (defined (__ARM_ARCH_7EM__) && (__ARM_ARCH_7EM__ == 1)) ) */ - - -/** - \brief Get FPSCR - \details Returns the current value of the Floating Point Status/Control register. - \return Floating Point Status/Control register value - */ -__STATIC_INLINE uint32_t __get_FPSCR(void) -{ -#if ((defined (__FPU_PRESENT) && (__FPU_PRESENT == 1U)) && \ - (defined (__FPU_USED ) && (__FPU_USED == 1U)) ) - register uint32_t __regfpscr __ASM("fpscr"); - return(__regfpscr); -#else - return(0U); -#endif -} - - -/** - \brief Set FPSCR - \details Assigns the given value to the Floating Point Status/Control register. - \param [in] fpscr Floating Point Status/Control value to set - */ -__STATIC_INLINE void __set_FPSCR(uint32_t fpscr) -{ -#if ((defined (__FPU_PRESENT) && (__FPU_PRESENT == 1U)) && \ - (defined (__FPU_USED ) && (__FPU_USED == 1U)) ) - register uint32_t __regfpscr __ASM("fpscr"); - __regfpscr = (fpscr); -#else - (void)fpscr; -#endif -} - - -/*@} end of CMSIS_Core_RegAccFunctions */ - - -/* ########################## Core Instruction Access ######################### */ -/** \defgroup CMSIS_Core_InstructionInterface CMSIS Core Instruction Interface - Access to dedicated instructions - @{ -*/ - -/** - \brief No Operation - \details No Operation does nothing. This instruction can be used for code alignment purposes. - */ -#define __NOP __nop - - -/** - \brief Wait For Interrupt - \details Wait For Interrupt is a hint instruction that suspends execution until one of a number of events occurs. - */ -#define __WFI __wfi - - -/** - \brief Wait For Event - \details Wait For Event is a hint instruction that permits the processor to enter - a low-power state until one of a number of events occurs. - */ -#define __WFE __wfe - - -/** - \brief Send Event - \details Send Event is a hint instruction. It causes an event to be signaled to the CPU. - */ -#define __SEV __sev - - -/** - \brief Instruction Synchronization Barrier - \details Instruction Synchronization Barrier flushes the pipeline in the processor, - so that all instructions following the ISB are fetched from cache or memory, - after the instruction has been completed. - */ -#define __ISB() do {\ - __schedule_barrier();\ - __isb(0xF);\ - __schedule_barrier();\ - } while (0U) - -/** - \brief Data Synchronization Barrier - \details Acts as a special kind of Data Memory Barrier. - It completes when all explicit memory accesses before this instruction complete. - */ -#define __DSB() do {\ - __schedule_barrier();\ - __dsb(0xF);\ - __schedule_barrier();\ - } while (0U) - -/** - \brief Data Memory Barrier - \details Ensures the apparent order of the explicit memory operations before - and after the instruction, without ensuring their completion. - */ -#define __DMB() do {\ - __schedule_barrier();\ - __dmb(0xF);\ - __schedule_barrier();\ - } while (0U) - - -/** - \brief Reverse byte order (32 bit) - \details Reverses the byte order in unsigned integer value. For example, 0x12345678 becomes 0x78563412. - \param [in] value Value to reverse - \return Reversed value - */ -#define __REV __rev - - -/** - \brief Reverse byte order (16 bit) - \details Reverses the byte order within each halfword of a word. For example, 0x12345678 becomes 0x34127856. - \param [in] value Value to reverse - \return Reversed value - */ -#ifndef __NO_EMBEDDED_ASM -__attribute__((section(".rev16_text"))) __STATIC_INLINE __ASM uint32_t __REV16(uint32_t value) -{ - rev16 r0, r0 - bx lr -} -#endif - - -/** - \brief Reverse byte order (16 bit) - \details Reverses the byte order in a 16-bit value and returns the signed 16-bit result. For example, 0x0080 becomes 0x8000. - \param [in] value Value to reverse - \return Reversed value - */ -#ifndef __NO_EMBEDDED_ASM -__attribute__((section(".revsh_text"))) __STATIC_INLINE __ASM int16_t __REVSH(int16_t value) -{ - revsh r0, r0 - bx lr -} -#endif - - -/** - \brief Rotate Right in unsigned value (32 bit) - \details Rotate Right (immediate) provides the value of the contents of a register rotated by a variable number of bits. - \param [in] op1 Value to rotate - \param [in] op2 Number of Bits to rotate - \return Rotated value - */ -#define __ROR __ror - - -/** - \brief Breakpoint - \details Causes the processor to enter Debug state. - Debug tools can use this to investigate system state when the instruction at a particular address is reached. - \param [in] value is ignored by the processor. - If required, a debugger can use it to store additional information about the breakpoint. - */ -#define __BKPT(value) __breakpoint(value) - - -/** - \brief Reverse bit order of value - \details Reverses the bit order of the given value. - \param [in] value Value to reverse - \return Reversed value - */ -#if ((defined (__ARM_ARCH_7M__ ) && (__ARM_ARCH_7M__ == 1)) || \ - (defined (__ARM_ARCH_7EM__) && (__ARM_ARCH_7EM__ == 1)) ) - #define __RBIT __rbit -#else -__attribute__((always_inline)) __STATIC_INLINE uint32_t __RBIT(uint32_t value) -{ - uint32_t result; - uint32_t s = (4U /*sizeof(v)*/ * 8U) - 1U; /* extra shift needed at end */ - - result = value; /* r will be reversed bits of v; first get LSB of v */ - for (value >>= 1U; value != 0U; value >>= 1U) - { - result <<= 1U; - result |= value & 1U; - s--; - } - result <<= s; /* shift when v's highest bits are zero */ - return result; -} -#endif - - -/** - \brief Count leading zeros - \details Counts the number of leading zeros of a data value. - \param [in] value Value to count the leading zeros - \return number of leading zeros in value - */ -#define __CLZ __clz - - -#if ((defined (__ARM_ARCH_7M__ ) && (__ARM_ARCH_7M__ == 1)) || \ - (defined (__ARM_ARCH_7EM__) && (__ARM_ARCH_7EM__ == 1)) ) - -/** - \brief LDR Exclusive (8 bit) - \details Executes a exclusive LDR instruction for 8 bit value. - \param [in] ptr Pointer to data - \return value of type uint8_t at (*ptr) - */ -#if defined(__ARMCC_VERSION) && (__ARMCC_VERSION < 5060020) - #define __LDREXB(ptr) ((uint8_t ) __ldrex(ptr)) -#else - #define __LDREXB(ptr) _Pragma("push") _Pragma("diag_suppress 3731") ((uint8_t ) __ldrex(ptr)) _Pragma("pop") -#endif - - -/** - \brief LDR Exclusive (16 bit) - \details Executes a exclusive LDR instruction for 16 bit values. - \param [in] ptr Pointer to data - \return value of type uint16_t at (*ptr) - */ -#if defined(__ARMCC_VERSION) && (__ARMCC_VERSION < 5060020) - #define __LDREXH(ptr) ((uint16_t) __ldrex(ptr)) -#else - #define __LDREXH(ptr) _Pragma("push") _Pragma("diag_suppress 3731") ((uint16_t) __ldrex(ptr)) _Pragma("pop") -#endif - - -/** - \brief LDR Exclusive (32 bit) - \details Executes a exclusive LDR instruction for 32 bit values. - \param [in] ptr Pointer to data - \return value of type uint32_t at (*ptr) - */ -#if defined(__ARMCC_VERSION) && (__ARMCC_VERSION < 5060020) - #define __LDREXW(ptr) ((uint32_t ) __ldrex(ptr)) -#else - #define __LDREXW(ptr) _Pragma("push") _Pragma("diag_suppress 3731") ((uint32_t ) __ldrex(ptr)) _Pragma("pop") -#endif - - -/** - \brief STR Exclusive (8 bit) - \details Executes a exclusive STR instruction for 8 bit values. - \param [in] value Value to store - \param [in] ptr Pointer to location - \return 0 Function succeeded - \return 1 Function failed - */ -#if defined(__ARMCC_VERSION) && (__ARMCC_VERSION < 5060020) - #define __STREXB(value, ptr) __strex(value, ptr) -#else - #define __STREXB(value, ptr) _Pragma("push") _Pragma("diag_suppress 3731") __strex(value, ptr) _Pragma("pop") -#endif - - -/** - \brief STR Exclusive (16 bit) - \details Executes a exclusive STR instruction for 16 bit values. - \param [in] value Value to store - \param [in] ptr Pointer to location - \return 0 Function succeeded - \return 1 Function failed - */ -#if defined(__ARMCC_VERSION) && (__ARMCC_VERSION < 5060020) - #define __STREXH(value, ptr) __strex(value, ptr) -#else - #define __STREXH(value, ptr) _Pragma("push") _Pragma("diag_suppress 3731") __strex(value, ptr) _Pragma("pop") -#endif - - -/** - \brief STR Exclusive (32 bit) - \details Executes a exclusive STR instruction for 32 bit values. - \param [in] value Value to store - \param [in] ptr Pointer to location - \return 0 Function succeeded - \return 1 Function failed - */ -#if defined(__ARMCC_VERSION) && (__ARMCC_VERSION < 5060020) - #define __STREXW(value, ptr) __strex(value, ptr) -#else - #define __STREXW(value, ptr) _Pragma("push") _Pragma("diag_suppress 3731") __strex(value, ptr) _Pragma("pop") -#endif - - -/** - \brief Remove the exclusive lock - \details Removes the exclusive lock which is created by LDREX. - */ -#define __CLREX __clrex - - -/** - \brief Signed Saturate - \details Saturates a signed value. - \param [in] value Value to be saturated - \param [in] sat Bit position to saturate to (1..32) - \return Saturated value - */ -#define __SSAT __ssat - - -/** - \brief Unsigned Saturate - \details Saturates an unsigned value. - \param [in] value Value to be saturated - \param [in] sat Bit position to saturate to (0..31) - \return Saturated value - */ -#define __USAT __usat - - -/** - \brief Rotate Right with Extend (32 bit) - \details Moves each bit of a bitstring right by one bit. - The carry input is shifted in at the left end of the bitstring. - \param [in] value Value to rotate - \return Rotated value - */ -#ifndef __NO_EMBEDDED_ASM -__attribute__((section(".rrx_text"))) __STATIC_INLINE __ASM uint32_t __RRX(uint32_t value) -{ - rrx r0, r0 - bx lr -} -#endif - - -/** - \brief LDRT Unprivileged (8 bit) - \details Executes a Unprivileged LDRT instruction for 8 bit value. - \param [in] ptr Pointer to data - \return value of type uint8_t at (*ptr) - */ -#define __LDRBT(ptr) ((uint8_t ) __ldrt(ptr)) - - -/** - \brief LDRT Unprivileged (16 bit) - \details Executes a Unprivileged LDRT instruction for 16 bit values. - \param [in] ptr Pointer to data - \return value of type uint16_t at (*ptr) - */ -#define __LDRHT(ptr) ((uint16_t) __ldrt(ptr)) - - -/** - \brief LDRT Unprivileged (32 bit) - \details Executes a Unprivileged LDRT instruction for 32 bit values. - \param [in] ptr Pointer to data - \return value of type uint32_t at (*ptr) - */ -#define __LDRT(ptr) ((uint32_t ) __ldrt(ptr)) - - -/** - \brief STRT Unprivileged (8 bit) - \details Executes a Unprivileged STRT instruction for 8 bit values. - \param [in] value Value to store - \param [in] ptr Pointer to location - */ -#define __STRBT(value, ptr) __strt(value, ptr) - - -/** - \brief STRT Unprivileged (16 bit) - \details Executes a Unprivileged STRT instruction for 16 bit values. - \param [in] value Value to store - \param [in] ptr Pointer to location - */ -#define __STRHT(value, ptr) __strt(value, ptr) - - -/** - \brief STRT Unprivileged (32 bit) - \details Executes a Unprivileged STRT instruction for 32 bit values. - \param [in] value Value to store - \param [in] ptr Pointer to location - */ -#define __STRT(value, ptr) __strt(value, ptr) - -#else /* ((defined (__ARM_ARCH_7M__ ) && (__ARM_ARCH_7M__ == 1)) || \ - (defined (__ARM_ARCH_7EM__) && (__ARM_ARCH_7EM__ == 1)) ) */ - -/** - \brief Signed Saturate - \details Saturates a signed value. - \param [in] value Value to be saturated - \param [in] sat Bit position to saturate to (1..32) - \return Saturated value - */ -__attribute__((always_inline)) __STATIC_INLINE int32_t __SSAT(int32_t val, uint32_t sat) -{ - if ((sat >= 1U) && (sat <= 32U)) - { - const int32_t max = (int32_t)((1U << (sat - 1U)) - 1U); - const int32_t min = -1 - max ; - if (val > max) - { - return max; - } - else if (val < min) - { - return min; - } - } - return val; -} - -/** - \brief Unsigned Saturate - \details Saturates an unsigned value. - \param [in] value Value to be saturated - \param [in] sat Bit position to saturate to (0..31) - \return Saturated value - */ -__attribute__((always_inline)) __STATIC_INLINE uint32_t __USAT(int32_t val, uint32_t sat) -{ - if (sat <= 31U) - { - const uint32_t max = ((1U << sat) - 1U); - if (val > (int32_t)max) - { - return max; - } - else if (val < 0) - { - return 0U; - } - } - return (uint32_t)val; -} - -#endif /* ((defined (__ARM_ARCH_7M__ ) && (__ARM_ARCH_7M__ == 1)) || \ - (defined (__ARM_ARCH_7EM__) && (__ARM_ARCH_7EM__ == 1)) ) */ - -/*@}*/ /* end of group CMSIS_Core_InstructionInterface */ - - -/* ################### Compiler specific Intrinsics ########################### */ -/** \defgroup CMSIS_SIMD_intrinsics CMSIS SIMD Intrinsics - Access to dedicated SIMD instructions - @{ -*/ - -#if ((defined (__ARM_ARCH_7EM__) && (__ARM_ARCH_7EM__ == 1)) ) - -#define __SADD8 __sadd8 -#define __QADD8 __qadd8 -#define __SHADD8 __shadd8 -#define __UADD8 __uadd8 -#define __UQADD8 __uqadd8 -#define __UHADD8 __uhadd8 -#define __SSUB8 __ssub8 -#define __QSUB8 __qsub8 -#define __SHSUB8 __shsub8 -#define __USUB8 __usub8 -#define __UQSUB8 __uqsub8 -#define __UHSUB8 __uhsub8 -#define __SADD16 __sadd16 -#define __QADD16 __qadd16 -#define __SHADD16 __shadd16 -#define __UADD16 __uadd16 -#define __UQADD16 __uqadd16 -#define __UHADD16 __uhadd16 -#define __SSUB16 __ssub16 -#define __QSUB16 __qsub16 -#define __SHSUB16 __shsub16 -#define __USUB16 __usub16 -#define __UQSUB16 __uqsub16 -#define __UHSUB16 __uhsub16 -#define __SASX __sasx -#define __QASX __qasx -#define __SHASX __shasx -#define __UASX __uasx -#define __UQASX __uqasx -#define __UHASX __uhasx -#define __SSAX __ssax -#define __QSAX __qsax -#define __SHSAX __shsax -#define __USAX __usax -#define __UQSAX __uqsax -#define __UHSAX __uhsax -#define __USAD8 __usad8 -#define __USADA8 __usada8 -#define __SSAT16 __ssat16 -#define __USAT16 __usat16 -#define __UXTB16 __uxtb16 -#define __UXTAB16 __uxtab16 -#define __SXTB16 __sxtb16 -#define __SXTAB16 __sxtab16 -#define __SMUAD __smuad -#define __SMUADX __smuadx -#define __SMLAD __smlad -#define __SMLADX __smladx -#define __SMLALD __smlald -#define __SMLALDX __smlaldx -#define __SMUSD __smusd -#define __SMUSDX __smusdx -#define __SMLSD __smlsd -#define __SMLSDX __smlsdx -#define __SMLSLD __smlsld -#define __SMLSLDX __smlsldx -#define __SEL __sel -#define __QADD __qadd -#define __QSUB __qsub - -#define __PKHBT(ARG1,ARG2,ARG3) ( ((((uint32_t)(ARG1)) ) & 0x0000FFFFUL) | \ - ((((uint32_t)(ARG2)) << (ARG3)) & 0xFFFF0000UL) ) - -#define __PKHTB(ARG1,ARG2,ARG3) ( ((((uint32_t)(ARG1)) ) & 0xFFFF0000UL) | \ - ((((uint32_t)(ARG2)) >> (ARG3)) & 0x0000FFFFUL) ) - -#define __SMMLA(ARG1,ARG2,ARG3) ( (int32_t)((((int64_t)(ARG1) * (ARG2)) + \ - ((int64_t)(ARG3) << 32U) ) >> 32U)) - -#endif /* ((defined (__ARM_ARCH_7EM__) && (__ARM_ARCH_7EM__ == 1)) ) */ -/*@} end of group CMSIS_SIMD_intrinsics */ - - -#endif /* __CMSIS_ARMCC_H */ diff --git a/test_dma/Drivers/CMSIS/Include/cmsis_armclang.h b/test_dma/Drivers/CMSIS/Include/cmsis_armclang.h deleted file mode 100644 index d8031b0..0000000 --- a/test_dma/Drivers/CMSIS/Include/cmsis_armclang.h +++ /dev/null @@ -1,1869 +0,0 @@ -/**************************************************************************//** - * @file cmsis_armclang.h - * @brief CMSIS compiler armclang (Arm Compiler 6) header file - * @version V5.0.4 - * @date 10. January 2018 - ******************************************************************************/ -/* - * Copyright (c) 2009-2018 Arm Limited. All rights reserved. - * - * SPDX-License-Identifier: Apache-2.0 - * - * Licensed under the Apache License, Version 2.0 (the License); you may - * not use this file except in compliance with the License. - * You may obtain a copy of the License at - * - * www.apache.org/licenses/LICENSE-2.0 - * - * Unless required by applicable law or agreed to in writing, software - * distributed under the License is distributed on an AS IS BASIS, WITHOUT - * WARRANTIES OR CONDITIONS OF ANY KIND, either express or implied. - * See the License for the specific language governing permissions and - * limitations under the License. - */ - -/*lint -esym(9058, IRQn)*/ /* disable MISRA 2012 Rule 2.4 for IRQn */ - -#ifndef __CMSIS_ARMCLANG_H -#define __CMSIS_ARMCLANG_H - -#pragma clang system_header /* treat file as system include file */ - -#ifndef __ARM_COMPAT_H -#include /* Compatibility header for Arm Compiler 5 intrinsics */ -#endif - -/* CMSIS compiler specific defines */ -#ifndef __ASM - #define __ASM __asm -#endif -#ifndef __INLINE - #define __INLINE __inline -#endif -#ifndef __STATIC_INLINE - #define __STATIC_INLINE static __inline -#endif -#ifndef __STATIC_FORCEINLINE - #define __STATIC_FORCEINLINE __attribute__((always_inline)) static __inline -#endif -#ifndef __NO_RETURN - #define __NO_RETURN __attribute__((__noreturn__)) -#endif -#ifndef __USED - #define __USED __attribute__((used)) -#endif -#ifndef __WEAK - #define __WEAK __attribute__((weak)) -#endif -#ifndef __PACKED - #define __PACKED __attribute__((packed, aligned(1))) -#endif -#ifndef __PACKED_STRUCT - #define __PACKED_STRUCT struct __attribute__((packed, aligned(1))) -#endif -#ifndef __PACKED_UNION - #define __PACKED_UNION union __attribute__((packed, aligned(1))) -#endif -#ifndef __UNALIGNED_UINT32 /* deprecated */ - #pragma clang diagnostic push - #pragma clang diagnostic ignored "-Wpacked" -/*lint -esym(9058, T_UINT32)*/ /* disable MISRA 2012 Rule 2.4 for T_UINT32 */ - struct __attribute__((packed)) T_UINT32 { uint32_t v; }; - #pragma clang diagnostic pop - #define __UNALIGNED_UINT32(x) (((struct T_UINT32 *)(x))->v) -#endif -#ifndef __UNALIGNED_UINT16_WRITE - #pragma clang diagnostic push - #pragma clang diagnostic ignored "-Wpacked" -/*lint -esym(9058, T_UINT16_WRITE)*/ /* disable MISRA 2012 Rule 2.4 for T_UINT16_WRITE */ - __PACKED_STRUCT T_UINT16_WRITE { uint16_t v; }; - #pragma clang diagnostic pop - #define __UNALIGNED_UINT16_WRITE(addr, val) (void)((((struct T_UINT16_WRITE *)(void *)(addr))->v) = (val)) -#endif -#ifndef __UNALIGNED_UINT16_READ - #pragma clang diagnostic push - #pragma clang diagnostic ignored "-Wpacked" -/*lint -esym(9058, T_UINT16_READ)*/ /* disable MISRA 2012 Rule 2.4 for T_UINT16_READ */ - __PACKED_STRUCT T_UINT16_READ { uint16_t v; }; - #pragma clang diagnostic pop - #define __UNALIGNED_UINT16_READ(addr) (((const struct T_UINT16_READ *)(const void *)(addr))->v) -#endif -#ifndef __UNALIGNED_UINT32_WRITE - #pragma clang diagnostic push - #pragma clang diagnostic ignored "-Wpacked" -/*lint -esym(9058, T_UINT32_WRITE)*/ /* disable MISRA 2012 Rule 2.4 for T_UINT32_WRITE */ - __PACKED_STRUCT T_UINT32_WRITE { uint32_t v; }; - #pragma clang diagnostic pop - #define __UNALIGNED_UINT32_WRITE(addr, val) (void)((((struct T_UINT32_WRITE *)(void *)(addr))->v) = (val)) -#endif -#ifndef __UNALIGNED_UINT32_READ - #pragma clang diagnostic push - #pragma clang diagnostic ignored "-Wpacked" -/*lint -esym(9058, T_UINT32_READ)*/ /* disable MISRA 2012 Rule 2.4 for T_UINT32_READ */ - __PACKED_STRUCT T_UINT32_READ { uint32_t v; }; - #pragma clang diagnostic pop - #define __UNALIGNED_UINT32_READ(addr) (((const struct T_UINT32_READ *)(const void *)(addr))->v) -#endif -#ifndef __ALIGNED - #define __ALIGNED(x) __attribute__((aligned(x))) -#endif -#ifndef __RESTRICT - #define __RESTRICT __restrict -#endif - - -/* ########################### Core Function Access ########################### */ -/** \ingroup CMSIS_Core_FunctionInterface - \defgroup CMSIS_Core_RegAccFunctions CMSIS Core Register Access Functions - @{ - */ - -/** - \brief Enable IRQ Interrupts - \details Enables IRQ interrupts by clearing the I-bit in the CPSR. - Can only be executed in Privileged modes. - */ -/* intrinsic void __enable_irq(); see arm_compat.h */ - - -/** - \brief Disable IRQ Interrupts - \details Disables IRQ interrupts by setting the I-bit in the CPSR. - Can only be executed in Privileged modes. - */ -/* intrinsic void __disable_irq(); see arm_compat.h */ - - -/** - \brief Get Control Register - \details Returns the content of the Control Register. - \return Control Register value - */ -__STATIC_FORCEINLINE uint32_t __get_CONTROL(void) -{ - uint32_t result; - - __ASM volatile ("MRS %0, control" : "=r" (result) ); - return(result); -} - - -#if (defined (__ARM_FEATURE_CMSE ) && (__ARM_FEATURE_CMSE == 3)) -/** - \brief Get Control Register (non-secure) - \details Returns the content of the non-secure Control Register when in secure mode. - \return non-secure Control Register value - */ -__STATIC_FORCEINLINE uint32_t __TZ_get_CONTROL_NS(void) -{ - uint32_t result; - - __ASM volatile ("MRS %0, control_ns" : "=r" (result) ); - return(result); -} -#endif - - -/** - \brief Set Control Register - \details Writes the given value to the Control Register. - \param [in] control Control Register value to set - */ -__STATIC_FORCEINLINE void __set_CONTROL(uint32_t control) -{ - __ASM volatile ("MSR control, %0" : : "r" (control) : "memory"); -} - - -#if (defined (__ARM_FEATURE_CMSE ) && (__ARM_FEATURE_CMSE == 3)) -/** - \brief Set Control Register (non-secure) - \details Writes the given value to the non-secure Control Register when in secure state. - \param [in] control Control Register value to set - */ -__STATIC_FORCEINLINE void __TZ_set_CONTROL_NS(uint32_t control) -{ - __ASM volatile ("MSR control_ns, %0" : : "r" (control) : "memory"); -} -#endif - - -/** - \brief Get IPSR Register - \details Returns the content of the IPSR Register. - \return IPSR Register value - */ -__STATIC_FORCEINLINE uint32_t __get_IPSR(void) -{ - uint32_t result; - - __ASM volatile ("MRS %0, ipsr" : "=r" (result) ); - return(result); -} - - -/** - \brief Get APSR Register - \details Returns the content of the APSR Register. - \return APSR Register value - */ -__STATIC_FORCEINLINE uint32_t __get_APSR(void) -{ - uint32_t result; - - __ASM volatile ("MRS %0, apsr" : "=r" (result) ); - return(result); -} - - -/** - \brief Get xPSR Register - \details Returns the content of the xPSR Register. - \return xPSR Register value - */ -__STATIC_FORCEINLINE uint32_t __get_xPSR(void) -{ - uint32_t result; - - __ASM volatile ("MRS %0, xpsr" : "=r" (result) ); - return(result); -} - - -/** - \brief Get Process Stack Pointer - \details Returns the current value of the Process Stack Pointer (PSP). - \return PSP Register value - */ -__STATIC_FORCEINLINE uint32_t __get_PSP(void) -{ - uint32_t result; - - __ASM volatile ("MRS %0, psp" : "=r" (result) ); - return(result); -} - - -#if (defined (__ARM_FEATURE_CMSE ) && (__ARM_FEATURE_CMSE == 3)) -/** - \brief Get Process Stack Pointer (non-secure) - \details Returns the current value of the non-secure Process Stack Pointer (PSP) when in secure state. - \return PSP Register value - */ -__STATIC_FORCEINLINE uint32_t __TZ_get_PSP_NS(void) -{ - uint32_t result; - - __ASM volatile ("MRS %0, psp_ns" : "=r" (result) ); - return(result); -} -#endif - - -/** - \brief Set Process Stack Pointer - \details Assigns the given value to the Process Stack Pointer (PSP). - \param [in] topOfProcStack Process Stack Pointer value to set - */ -__STATIC_FORCEINLINE void __set_PSP(uint32_t topOfProcStack) -{ - __ASM volatile ("MSR psp, %0" : : "r" (topOfProcStack) : ); -} - - -#if (defined (__ARM_FEATURE_CMSE ) && (__ARM_FEATURE_CMSE == 3)) -/** - \brief Set Process Stack Pointer (non-secure) - \details Assigns the given value to the non-secure Process Stack Pointer (PSP) when in secure state. - \param [in] topOfProcStack Process Stack Pointer value to set - */ -__STATIC_FORCEINLINE void __TZ_set_PSP_NS(uint32_t topOfProcStack) -{ - __ASM volatile ("MSR psp_ns, %0" : : "r" (topOfProcStack) : ); -} -#endif - - -/** - \brief Get Main Stack Pointer - \details Returns the current value of the Main Stack Pointer (MSP). - \return MSP Register value - */ -__STATIC_FORCEINLINE uint32_t __get_MSP(void) -{ - uint32_t result; - - __ASM volatile ("MRS %0, msp" : "=r" (result) ); - return(result); -} - - -#if (defined (__ARM_FEATURE_CMSE ) && (__ARM_FEATURE_CMSE == 3)) -/** - \brief Get Main Stack Pointer (non-secure) - \details Returns the current value of the non-secure Main Stack Pointer (MSP) when in secure state. - \return MSP Register value - */ -__STATIC_FORCEINLINE uint32_t __TZ_get_MSP_NS(void) -{ - uint32_t result; - - __ASM volatile ("MRS %0, msp_ns" : "=r" (result) ); - return(result); -} -#endif - - -/** - \brief Set Main Stack Pointer - \details Assigns the given value to the Main Stack Pointer (MSP). - \param [in] topOfMainStack Main Stack Pointer value to set - */ -__STATIC_FORCEINLINE void __set_MSP(uint32_t topOfMainStack) -{ - __ASM volatile ("MSR msp, %0" : : "r" (topOfMainStack) : ); -} - - -#if (defined (__ARM_FEATURE_CMSE ) && (__ARM_FEATURE_CMSE == 3)) -/** - \brief Set Main Stack Pointer (non-secure) - \details Assigns the given value to the non-secure Main Stack Pointer (MSP) when in secure state. - \param [in] topOfMainStack Main Stack Pointer value to set - */ -__STATIC_FORCEINLINE void __TZ_set_MSP_NS(uint32_t topOfMainStack) -{ - __ASM volatile ("MSR msp_ns, %0" : : "r" (topOfMainStack) : ); -} -#endif - - -#if (defined (__ARM_FEATURE_CMSE ) && (__ARM_FEATURE_CMSE == 3)) -/** - \brief Get Stack Pointer (non-secure) - \details Returns the current value of the non-secure Stack Pointer (SP) when in secure state. - \return SP Register value - */ -__STATIC_FORCEINLINE uint32_t __TZ_get_SP_NS(void) -{ - uint32_t result; - - __ASM volatile ("MRS %0, sp_ns" : "=r" (result) ); - return(result); -} - - -/** - \brief Set Stack Pointer (non-secure) - \details Assigns the given value to the non-secure Stack Pointer (SP) when in secure state. - \param [in] topOfStack Stack Pointer value to set - */ -__STATIC_FORCEINLINE void __TZ_set_SP_NS(uint32_t topOfStack) -{ - __ASM volatile ("MSR sp_ns, %0" : : "r" (topOfStack) : ); -} -#endif - - -/** - \brief Get Priority Mask - \details Returns the current state of the priority mask bit from the Priority Mask Register. - \return Priority Mask value - */ -__STATIC_FORCEINLINE uint32_t __get_PRIMASK(void) -{ - uint32_t result; - - __ASM volatile ("MRS %0, primask" : "=r" (result) ); - return(result); -} - - -#if (defined (__ARM_FEATURE_CMSE ) && (__ARM_FEATURE_CMSE == 3)) -/** - \brief Get Priority Mask (non-secure) - \details Returns the current state of the non-secure priority mask bit from the Priority Mask Register when in secure state. - \return Priority Mask value - */ -__STATIC_FORCEINLINE uint32_t __TZ_get_PRIMASK_NS(void) -{ - uint32_t result; - - __ASM volatile ("MRS %0, primask_ns" : "=r" (result) ); - return(result); -} -#endif - - -/** - \brief Set Priority Mask - \details Assigns the given value to the Priority Mask Register. - \param [in] priMask Priority Mask - */ -__STATIC_FORCEINLINE void __set_PRIMASK(uint32_t priMask) -{ - __ASM volatile ("MSR primask, %0" : : "r" (priMask) : "memory"); -} - - -#if (defined (__ARM_FEATURE_CMSE ) && (__ARM_FEATURE_CMSE == 3)) -/** - \brief Set Priority Mask (non-secure) - \details Assigns the given value to the non-secure Priority Mask Register when in secure state. - \param [in] priMask Priority Mask - */ -__STATIC_FORCEINLINE void __TZ_set_PRIMASK_NS(uint32_t priMask) -{ - __ASM volatile ("MSR primask_ns, %0" : : "r" (priMask) : "memory"); -} -#endif - - -#if ((defined (__ARM_ARCH_7M__ ) && (__ARM_ARCH_7M__ == 1)) || \ - (defined (__ARM_ARCH_7EM__ ) && (__ARM_ARCH_7EM__ == 1)) || \ - (defined (__ARM_ARCH_8M_MAIN__ ) && (__ARM_ARCH_8M_MAIN__ == 1)) ) -/** - \brief Enable FIQ - \details Enables FIQ interrupts by clearing the F-bit in the CPSR. - Can only be executed in Privileged modes. - */ -#define __enable_fault_irq __enable_fiq /* see arm_compat.h */ - - -/** - \brief Disable FIQ - \details Disables FIQ interrupts by setting the F-bit in the CPSR. - Can only be executed in Privileged modes. - */ -#define __disable_fault_irq __disable_fiq /* see arm_compat.h */ - - -/** - \brief Get Base Priority - \details Returns the current value of the Base Priority register. - \return Base Priority register value - */ -__STATIC_FORCEINLINE uint32_t __get_BASEPRI(void) -{ - uint32_t result; - - __ASM volatile ("MRS %0, basepri" : "=r" (result) ); - return(result); -} - - -#if (defined (__ARM_FEATURE_CMSE ) && (__ARM_FEATURE_CMSE == 3)) -/** - \brief Get Base Priority (non-secure) - \details Returns the current value of the non-secure Base Priority register when in secure state. - \return Base Priority register value - */ -__STATIC_FORCEINLINE uint32_t __TZ_get_BASEPRI_NS(void) -{ - uint32_t result; - - __ASM volatile ("MRS %0, basepri_ns" : "=r" (result) ); - return(result); -} -#endif - - -/** - \brief Set Base Priority - \details Assigns the given value to the Base Priority register. - \param [in] basePri Base Priority value to set - */ -__STATIC_FORCEINLINE void __set_BASEPRI(uint32_t basePri) -{ - __ASM volatile ("MSR basepri, %0" : : "r" (basePri) : "memory"); -} - - -#if (defined (__ARM_FEATURE_CMSE ) && (__ARM_FEATURE_CMSE == 3)) -/** - \brief Set Base Priority (non-secure) - \details Assigns the given value to the non-secure Base Priority register when in secure state. - \param [in] basePri Base Priority value to set - */ -__STATIC_FORCEINLINE void __TZ_set_BASEPRI_NS(uint32_t basePri) -{ - __ASM volatile ("MSR basepri_ns, %0" : : "r" (basePri) : "memory"); -} -#endif - - -/** - \brief Set Base Priority with condition - \details Assigns the given value to the Base Priority register only if BASEPRI masking is disabled, - or the new value increases the BASEPRI priority level. - \param [in] basePri Base Priority value to set - */ -__STATIC_FORCEINLINE void __set_BASEPRI_MAX(uint32_t basePri) -{ - __ASM volatile ("MSR basepri_max, %0" : : "r" (basePri) : "memory"); -} - - -/** - \brief Get Fault Mask - \details Returns the current value of the Fault Mask register. - \return Fault Mask register value - */ -__STATIC_FORCEINLINE uint32_t __get_FAULTMASK(void) -{ - uint32_t result; - - __ASM volatile ("MRS %0, faultmask" : "=r" (result) ); - return(result); -} - - -#if (defined (__ARM_FEATURE_CMSE ) && (__ARM_FEATURE_CMSE == 3)) -/** - \brief Get Fault Mask (non-secure) - \details Returns the current value of the non-secure Fault Mask register when in secure state. - \return Fault Mask register value - */ -__STATIC_FORCEINLINE uint32_t __TZ_get_FAULTMASK_NS(void) -{ - uint32_t result; - - __ASM volatile ("MRS %0, faultmask_ns" : "=r" (result) ); - return(result); -} -#endif - - -/** - \brief Set Fault Mask - \details Assigns the given value to the Fault Mask register. - \param [in] faultMask Fault Mask value to set - */ -__STATIC_FORCEINLINE void __set_FAULTMASK(uint32_t faultMask) -{ - __ASM volatile ("MSR faultmask, %0" : : "r" (faultMask) : "memory"); -} - - -#if (defined (__ARM_FEATURE_CMSE ) && (__ARM_FEATURE_CMSE == 3)) -/** - \brief Set Fault Mask (non-secure) - \details Assigns the given value to the non-secure Fault Mask register when in secure state. - \param [in] faultMask Fault Mask value to set - */ -__STATIC_FORCEINLINE void __TZ_set_FAULTMASK_NS(uint32_t faultMask) -{ - __ASM volatile ("MSR faultmask_ns, %0" : : "r" (faultMask) : "memory"); -} -#endif - -#endif /* ((defined (__ARM_ARCH_7M__ ) && (__ARM_ARCH_7M__ == 1)) || \ - (defined (__ARM_ARCH_7EM__ ) && (__ARM_ARCH_7EM__ == 1)) || \ - (defined (__ARM_ARCH_8M_MAIN__ ) && (__ARM_ARCH_8M_MAIN__ == 1)) ) */ - - -#if ((defined (__ARM_ARCH_8M_MAIN__ ) && (__ARM_ARCH_8M_MAIN__ == 1)) || \ - (defined (__ARM_ARCH_8M_BASE__ ) && (__ARM_ARCH_8M_BASE__ == 1)) ) - -/** - \brief Get Process Stack Pointer Limit - Devices without ARMv8-M Main Extensions (i.e. Cortex-M23) lack the non-secure - Stack Pointer Limit register hence zero is returned always in non-secure - mode. - - \details Returns the current value of the Process Stack Pointer Limit (PSPLIM). - \return PSPLIM Register value - */ -__STATIC_FORCEINLINE uint32_t __get_PSPLIM(void) -{ -#if (!(defined (__ARM_ARCH_8M_MAIN__ ) && (__ARM_ARCH_8M_MAIN__ == 1)) && \ - (!defined (__ARM_FEATURE_CMSE) || (__ARM_FEATURE_CMSE < 3))) - // without main extensions, the non-secure PSPLIM is RAZ/WI - return 0U; -#else - uint32_t result; - __ASM volatile ("MRS %0, psplim" : "=r" (result) ); - return result; -#endif -} - -#if (defined (__ARM_FEATURE_CMSE) && (__ARM_FEATURE_CMSE == 3)) -/** - \brief Get Process Stack Pointer Limit (non-secure) - Devices without ARMv8-M Main Extensions (i.e. Cortex-M23) lack the non-secure - Stack Pointer Limit register hence zero is returned always in non-secure - mode. - - \details Returns the current value of the non-secure Process Stack Pointer Limit (PSPLIM) when in secure state. - \return PSPLIM Register value - */ -__STATIC_FORCEINLINE uint32_t __TZ_get_PSPLIM_NS(void) -{ -#if (!(defined (__ARM_ARCH_8M_MAIN__ ) && (__ARM_ARCH_8M_MAIN__ == 1))) - // without main extensions, the non-secure PSPLIM is RAZ/WI - return 0U; -#else - uint32_t result; - __ASM volatile ("MRS %0, psplim_ns" : "=r" (result) ); - return result; -#endif -} -#endif - - -/** - \brief Set Process Stack Pointer Limit - Devices without ARMv8-M Main Extensions (i.e. Cortex-M23) lack the non-secure - Stack Pointer Limit register hence the write is silently ignored in non-secure - mode. - - \details Assigns the given value to the Process Stack Pointer Limit (PSPLIM). - \param [in] ProcStackPtrLimit Process Stack Pointer Limit value to set - */ -__STATIC_FORCEINLINE void __set_PSPLIM(uint32_t ProcStackPtrLimit) -{ -#if (!(defined (__ARM_ARCH_8M_MAIN__ ) && (__ARM_ARCH_8M_MAIN__ == 1)) && \ - (!defined (__ARM_FEATURE_CMSE) || (__ARM_FEATURE_CMSE < 3))) - // without main extensions, the non-secure PSPLIM is RAZ/WI - (void)ProcStackPtrLimit; -#else - __ASM volatile ("MSR psplim, %0" : : "r" (ProcStackPtrLimit)); -#endif -} - - -#if (defined (__ARM_FEATURE_CMSE ) && (__ARM_FEATURE_CMSE == 3)) -/** - \brief Set Process Stack Pointer (non-secure) - Devices without ARMv8-M Main Extensions (i.e. Cortex-M23) lack the non-secure - Stack Pointer Limit register hence the write is silently ignored in non-secure - mode. - - \details Assigns the given value to the non-secure Process Stack Pointer Limit (PSPLIM) when in secure state. - \param [in] ProcStackPtrLimit Process Stack Pointer Limit value to set - */ -__STATIC_FORCEINLINE void __TZ_set_PSPLIM_NS(uint32_t ProcStackPtrLimit) -{ -#if (!(defined (__ARM_ARCH_8M_MAIN__ ) && (__ARM_ARCH_8M_MAIN__ == 1))) - // without main extensions, the non-secure PSPLIM is RAZ/WI - (void)ProcStackPtrLimit; -#else - __ASM volatile ("MSR psplim_ns, %0\n" : : "r" (ProcStackPtrLimit)); -#endif -} -#endif - - -/** - \brief Get Main Stack Pointer Limit - Devices without ARMv8-M Main Extensions (i.e. Cortex-M23) lack the non-secure - Stack Pointer Limit register hence zero is returned always. - - \details Returns the current value of the Main Stack Pointer Limit (MSPLIM). - \return MSPLIM Register value - */ -__STATIC_FORCEINLINE uint32_t __get_MSPLIM(void) -{ -#if (!(defined (__ARM_ARCH_8M_MAIN__ ) && (__ARM_ARCH_8M_MAIN__ == 1)) && \ - (!defined (__ARM_FEATURE_CMSE) || (__ARM_FEATURE_CMSE < 3))) - // without main extensions, the non-secure MSPLIM is RAZ/WI - return 0U; -#else - uint32_t result; - __ASM volatile ("MRS %0, msplim" : "=r" (result) ); - return result; -#endif -} - - -#if (defined (__ARM_FEATURE_CMSE ) && (__ARM_FEATURE_CMSE == 3)) -/** - \brief Get Main Stack Pointer Limit (non-secure) - Devices without ARMv8-M Main Extensions (i.e. Cortex-M23) lack the non-secure - Stack Pointer Limit register hence zero is returned always. - - \details Returns the current value of the non-secure Main Stack Pointer Limit(MSPLIM) when in secure state. - \return MSPLIM Register value - */ -__STATIC_FORCEINLINE uint32_t __TZ_get_MSPLIM_NS(void) -{ -#if (!(defined (__ARM_ARCH_8M_MAIN__ ) && (__ARM_ARCH_8M_MAIN__ == 1))) - // without main extensions, the non-secure MSPLIM is RAZ/WI - return 0U; -#else - uint32_t result; - __ASM volatile ("MRS %0, msplim_ns" : "=r" (result) ); - return result; -#endif -} -#endif - - -/** - \brief Set Main Stack Pointer Limit - Devices without ARMv8-M Main Extensions (i.e. Cortex-M23) lack the non-secure - Stack Pointer Limit register hence the write is silently ignored. - - \details Assigns the given value to the Main Stack Pointer Limit (MSPLIM). - \param [in] MainStackPtrLimit Main Stack Pointer Limit value to set - */ -__STATIC_FORCEINLINE void __set_MSPLIM(uint32_t MainStackPtrLimit) -{ -#if (!(defined (__ARM_ARCH_8M_MAIN__ ) && (__ARM_ARCH_8M_MAIN__ == 1)) && \ - (!defined (__ARM_FEATURE_CMSE) || (__ARM_FEATURE_CMSE < 3))) - // without main extensions, the non-secure MSPLIM is RAZ/WI - (void)MainStackPtrLimit; -#else - __ASM volatile ("MSR msplim, %0" : : "r" (MainStackPtrLimit)); -#endif -} - - -#if (defined (__ARM_FEATURE_CMSE ) && (__ARM_FEATURE_CMSE == 3)) -/** - \brief Set Main Stack Pointer Limit (non-secure) - Devices without ARMv8-M Main Extensions (i.e. Cortex-M23) lack the non-secure - Stack Pointer Limit register hence the write is silently ignored. - - \details Assigns the given value to the non-secure Main Stack Pointer Limit (MSPLIM) when in secure state. - \param [in] MainStackPtrLimit Main Stack Pointer value to set - */ -__STATIC_FORCEINLINE void __TZ_set_MSPLIM_NS(uint32_t MainStackPtrLimit) -{ -#if (!(defined (__ARM_ARCH_8M_MAIN__ ) && (__ARM_ARCH_8M_MAIN__ == 1))) - // without main extensions, the non-secure MSPLIM is RAZ/WI - (void)MainStackPtrLimit; -#else - __ASM volatile ("MSR msplim_ns, %0" : : "r" (MainStackPtrLimit)); -#endif -} -#endif - -#endif /* ((defined (__ARM_ARCH_8M_MAIN__ ) && (__ARM_ARCH_8M_MAIN__ == 1)) || \ - (defined (__ARM_ARCH_8M_BASE__ ) && (__ARM_ARCH_8M_BASE__ == 1)) ) */ - -/** - \brief Get FPSCR - \details Returns the current value of the Floating Point Status/Control register. - \return Floating Point Status/Control register value - */ -#if ((defined (__FPU_PRESENT) && (__FPU_PRESENT == 1U)) && \ - (defined (__FPU_USED ) && (__FPU_USED == 1U)) ) -#define __get_FPSCR (uint32_t)__builtin_arm_get_fpscr -#else -#define __get_FPSCR() ((uint32_t)0U) -#endif - -/** - \brief Set FPSCR - \details Assigns the given value to the Floating Point Status/Control register. - \param [in] fpscr Floating Point Status/Control value to set - */ -#if ((defined (__FPU_PRESENT) && (__FPU_PRESENT == 1U)) && \ - (defined (__FPU_USED ) && (__FPU_USED == 1U)) ) -#define __set_FPSCR __builtin_arm_set_fpscr -#else -#define __set_FPSCR(x) ((void)(x)) -#endif - - -/*@} end of CMSIS_Core_RegAccFunctions */ - - -/* ########################## Core Instruction Access ######################### */ -/** \defgroup CMSIS_Core_InstructionInterface CMSIS Core Instruction Interface - Access to dedicated instructions - @{ -*/ - -/* Define macros for porting to both thumb1 and thumb2. - * For thumb1, use low register (r0-r7), specified by constraint "l" - * Otherwise, use general registers, specified by constraint "r" */ -#if defined (__thumb__) && !defined (__thumb2__) -#define __CMSIS_GCC_OUT_REG(r) "=l" (r) -#define __CMSIS_GCC_USE_REG(r) "l" (r) -#else -#define __CMSIS_GCC_OUT_REG(r) "=r" (r) -#define __CMSIS_GCC_USE_REG(r) "r" (r) -#endif - -/** - \brief No Operation - \details No Operation does nothing. This instruction can be used for code alignment purposes. - */ -#define __NOP __builtin_arm_nop - -/** - \brief Wait For Interrupt - \details Wait For Interrupt is a hint instruction that suspends execution until one of a number of events occurs. - */ -#define __WFI __builtin_arm_wfi - - -/** - \brief Wait For Event - \details Wait For Event is a hint instruction that permits the processor to enter - a low-power state until one of a number of events occurs. - */ -#define __WFE __builtin_arm_wfe - - -/** - \brief Send Event - \details Send Event is a hint instruction. It causes an event to be signaled to the CPU. - */ -#define __SEV __builtin_arm_sev - - -/** - \brief Instruction Synchronization Barrier - \details Instruction Synchronization Barrier flushes the pipeline in the processor, - so that all instructions following the ISB are fetched from cache or memory, - after the instruction has been completed. - */ -#define __ISB() __builtin_arm_isb(0xF); - -/** - \brief Data Synchronization Barrier - \details Acts as a special kind of Data Memory Barrier. - It completes when all explicit memory accesses before this instruction complete. - */ -#define __DSB() __builtin_arm_dsb(0xF); - - -/** - \brief Data Memory Barrier - \details Ensures the apparent order of the explicit memory operations before - and after the instruction, without ensuring their completion. - */ -#define __DMB() __builtin_arm_dmb(0xF); - - -/** - \brief Reverse byte order (32 bit) - \details Reverses the byte order in unsigned integer value. For example, 0x12345678 becomes 0x78563412. - \param [in] value Value to reverse - \return Reversed value - */ -#define __REV(value) __builtin_bswap32(value) - - -/** - \brief Reverse byte order (16 bit) - \details Reverses the byte order within each halfword of a word. For example, 0x12345678 becomes 0x34127856. - \param [in] value Value to reverse - \return Reversed value - */ -#define __REV16(value) __ROR(__REV(value), 16) - - -/** - \brief Reverse byte order (16 bit) - \details Reverses the byte order in a 16-bit value and returns the signed 16-bit result. For example, 0x0080 becomes 0x8000. - \param [in] value Value to reverse - \return Reversed value - */ -#define __REVSH(value) (int16_t)__builtin_bswap16(value) - - -/** - \brief Rotate Right in unsigned value (32 bit) - \details Rotate Right (immediate) provides the value of the contents of a register rotated by a variable number of bits. - \param [in] op1 Value to rotate - \param [in] op2 Number of Bits to rotate - \return Rotated value - */ -__STATIC_FORCEINLINE uint32_t __ROR(uint32_t op1, uint32_t op2) -{ - op2 %= 32U; - if (op2 == 0U) - { - return op1; - } - return (op1 >> op2) | (op1 << (32U - op2)); -} - - -/** - \brief Breakpoint - \details Causes the processor to enter Debug state. - Debug tools can use this to investigate system state when the instruction at a particular address is reached. - \param [in] value is ignored by the processor. - If required, a debugger can use it to store additional information about the breakpoint. - */ -#define __BKPT(value) __ASM volatile ("bkpt "#value) - - -/** - \brief Reverse bit order of value - \details Reverses the bit order of the given value. - \param [in] value Value to reverse - \return Reversed value - */ -#define __RBIT __builtin_arm_rbit - -/** - \brief Count leading zeros - \details Counts the number of leading zeros of a data value. - \param [in] value Value to count the leading zeros - \return number of leading zeros in value - */ -#define __CLZ (uint8_t)__builtin_clz - - -#if ((defined (__ARM_ARCH_7M__ ) && (__ARM_ARCH_7M__ == 1)) || \ - (defined (__ARM_ARCH_7EM__ ) && (__ARM_ARCH_7EM__ == 1)) || \ - (defined (__ARM_ARCH_8M_MAIN__ ) && (__ARM_ARCH_8M_MAIN__ == 1)) || \ - (defined (__ARM_ARCH_8M_BASE__ ) && (__ARM_ARCH_8M_BASE__ == 1)) ) -/** - \brief LDR Exclusive (8 bit) - \details Executes a exclusive LDR instruction for 8 bit value. - \param [in] ptr Pointer to data - \return value of type uint8_t at (*ptr) - */ -#define __LDREXB (uint8_t)__builtin_arm_ldrex - - -/** - \brief LDR Exclusive (16 bit) - \details Executes a exclusive LDR instruction for 16 bit values. - \param [in] ptr Pointer to data - \return value of type uint16_t at (*ptr) - */ -#define __LDREXH (uint16_t)__builtin_arm_ldrex - - -/** - \brief LDR Exclusive (32 bit) - \details Executes a exclusive LDR instruction for 32 bit values. - \param [in] ptr Pointer to data - \return value of type uint32_t at (*ptr) - */ -#define __LDREXW (uint32_t)__builtin_arm_ldrex - - -/** - \brief STR Exclusive (8 bit) - \details Executes a exclusive STR instruction for 8 bit values. - \param [in] value Value to store - \param [in] ptr Pointer to location - \return 0 Function succeeded - \return 1 Function failed - */ -#define __STREXB (uint32_t)__builtin_arm_strex - - -/** - \brief STR Exclusive (16 bit) - \details Executes a exclusive STR instruction for 16 bit values. - \param [in] value Value to store - \param [in] ptr Pointer to location - \return 0 Function succeeded - \return 1 Function failed - */ -#define __STREXH (uint32_t)__builtin_arm_strex - - -/** - \brief STR Exclusive (32 bit) - \details Executes a exclusive STR instruction for 32 bit values. - \param [in] value Value to store - \param [in] ptr Pointer to location - \return 0 Function succeeded - \return 1 Function failed - */ -#define __STREXW (uint32_t)__builtin_arm_strex - - -/** - \brief Remove the exclusive lock - \details Removes the exclusive lock which is created by LDREX. - */ -#define __CLREX __builtin_arm_clrex - -#endif /* ((defined (__ARM_ARCH_7M__ ) && (__ARM_ARCH_7M__ == 1)) || \ - (defined (__ARM_ARCH_7EM__ ) && (__ARM_ARCH_7EM__ == 1)) || \ - (defined (__ARM_ARCH_8M_MAIN__ ) && (__ARM_ARCH_8M_MAIN__ == 1)) || \ - (defined (__ARM_ARCH_8M_BASE__ ) && (__ARM_ARCH_8M_BASE__ == 1)) ) */ - - -#if ((defined (__ARM_ARCH_7M__ ) && (__ARM_ARCH_7M__ == 1)) || \ - (defined (__ARM_ARCH_7EM__ ) && (__ARM_ARCH_7EM__ == 1)) || \ - (defined (__ARM_ARCH_8M_MAIN__ ) && (__ARM_ARCH_8M_MAIN__ == 1)) ) - -/** - \brief Signed Saturate - \details Saturates a signed value. - \param [in] value Value to be saturated - \param [in] sat Bit position to saturate to (1..32) - \return Saturated value - */ -#define __SSAT __builtin_arm_ssat - - -/** - \brief Unsigned Saturate - \details Saturates an unsigned value. - \param [in] value Value to be saturated - \param [in] sat Bit position to saturate to (0..31) - \return Saturated value - */ -#define __USAT __builtin_arm_usat - - -/** - \brief Rotate Right with Extend (32 bit) - \details Moves each bit of a bitstring right by one bit. - The carry input is shifted in at the left end of the bitstring. - \param [in] value Value to rotate - \return Rotated value - */ -__STATIC_FORCEINLINE uint32_t __RRX(uint32_t value) -{ - uint32_t result; - - __ASM volatile ("rrx %0, %1" : __CMSIS_GCC_OUT_REG (result) : __CMSIS_GCC_USE_REG (value) ); - return(result); -} - - -/** - \brief LDRT Unprivileged (8 bit) - \details Executes a Unprivileged LDRT instruction for 8 bit value. - \param [in] ptr Pointer to data - \return value of type uint8_t at (*ptr) - */ -__STATIC_FORCEINLINE uint8_t __LDRBT(volatile uint8_t *ptr) -{ - uint32_t result; - - __ASM volatile ("ldrbt %0, %1" : "=r" (result) : "Q" (*ptr) ); - return ((uint8_t) result); /* Add explicit type cast here */ -} - - -/** - \brief LDRT Unprivileged (16 bit) - \details Executes a Unprivileged LDRT instruction for 16 bit values. - \param [in] ptr Pointer to data - \return value of type uint16_t at (*ptr) - */ -__STATIC_FORCEINLINE uint16_t __LDRHT(volatile uint16_t *ptr) -{ - uint32_t result; - - __ASM volatile ("ldrht %0, %1" : "=r" (result) : "Q" (*ptr) ); - return ((uint16_t) result); /* Add explicit type cast here */ -} - - -/** - \brief LDRT Unprivileged (32 bit) - \details Executes a Unprivileged LDRT instruction for 32 bit values. - \param [in] ptr Pointer to data - \return value of type uint32_t at (*ptr) - */ -__STATIC_FORCEINLINE uint32_t __LDRT(volatile uint32_t *ptr) -{ - uint32_t result; - - __ASM volatile ("ldrt %0, %1" : "=r" (result) : "Q" (*ptr) ); - return(result); -} - - -/** - \brief STRT Unprivileged (8 bit) - \details Executes a Unprivileged STRT instruction for 8 bit values. - \param [in] value Value to store - \param [in] ptr Pointer to location - */ -__STATIC_FORCEINLINE void __STRBT(uint8_t value, volatile uint8_t *ptr) -{ - __ASM volatile ("strbt %1, %0" : "=Q" (*ptr) : "r" ((uint32_t)value) ); -} - - -/** - \brief STRT Unprivileged (16 bit) - \details Executes a Unprivileged STRT instruction for 16 bit values. - \param [in] value Value to store - \param [in] ptr Pointer to location - */ -__STATIC_FORCEINLINE void __STRHT(uint16_t value, volatile uint16_t *ptr) -{ - __ASM volatile ("strht %1, %0" : "=Q" (*ptr) : "r" ((uint32_t)value) ); -} - - -/** - \brief STRT Unprivileged (32 bit) - \details Executes a Unprivileged STRT instruction for 32 bit values. - \param [in] value Value to store - \param [in] ptr Pointer to location - */ -__STATIC_FORCEINLINE void __STRT(uint32_t value, volatile uint32_t *ptr) -{ - __ASM volatile ("strt %1, %0" : "=Q" (*ptr) : "r" (value) ); -} - -#else /* ((defined (__ARM_ARCH_7M__ ) && (__ARM_ARCH_7M__ == 1)) || \ - (defined (__ARM_ARCH_7EM__ ) && (__ARM_ARCH_7EM__ == 1)) || \ - (defined (__ARM_ARCH_8M_MAIN__ ) && (__ARM_ARCH_8M_MAIN__ == 1)) ) */ - -/** - \brief Signed Saturate - \details Saturates a signed value. - \param [in] value Value to be saturated - \param [in] sat Bit position to saturate to (1..32) - \return Saturated value - */ -__STATIC_FORCEINLINE int32_t __SSAT(int32_t val, uint32_t sat) -{ - if ((sat >= 1U) && (sat <= 32U)) - { - const int32_t max = (int32_t)((1U << (sat - 1U)) - 1U); - const int32_t min = -1 - max ; - if (val > max) - { - return max; - } - else if (val < min) - { - return min; - } - } - return val; -} - -/** - \brief Unsigned Saturate - \details Saturates an unsigned value. - \param [in] value Value to be saturated - \param [in] sat Bit position to saturate to (0..31) - \return Saturated value - */ -__STATIC_FORCEINLINE uint32_t __USAT(int32_t val, uint32_t sat) -{ - if (sat <= 31U) - { - const uint32_t max = ((1U << sat) - 1U); - if (val > (int32_t)max) - { - return max; - } - else if (val < 0) - { - return 0U; - } - } - return (uint32_t)val; -} - -#endif /* ((defined (__ARM_ARCH_7M__ ) && (__ARM_ARCH_7M__ == 1)) || \ - (defined (__ARM_ARCH_7EM__ ) && (__ARM_ARCH_7EM__ == 1)) || \ - (defined (__ARM_ARCH_8M_MAIN__ ) && (__ARM_ARCH_8M_MAIN__ == 1)) ) */ - - -#if ((defined (__ARM_ARCH_8M_MAIN__ ) && (__ARM_ARCH_8M_MAIN__ == 1)) || \ - (defined (__ARM_ARCH_8M_BASE__ ) && (__ARM_ARCH_8M_BASE__ == 1)) ) -/** - \brief Load-Acquire (8 bit) - \details Executes a LDAB instruction for 8 bit value. - \param [in] ptr Pointer to data - \return value of type uint8_t at (*ptr) - */ -__STATIC_FORCEINLINE uint8_t __LDAB(volatile uint8_t *ptr) -{ - uint32_t result; - - __ASM volatile ("ldab %0, %1" : "=r" (result) : "Q" (*ptr) ); - return ((uint8_t) result); -} - - -/** - \brief Load-Acquire (16 bit) - \details Executes a LDAH instruction for 16 bit values. - \param [in] ptr Pointer to data - \return value of type uint16_t at (*ptr) - */ -__STATIC_FORCEINLINE uint16_t __LDAH(volatile uint16_t *ptr) -{ - uint32_t result; - - __ASM volatile ("ldah %0, %1" : "=r" (result) : "Q" (*ptr) ); - return ((uint16_t) result); -} - - -/** - \brief Load-Acquire (32 bit) - \details Executes a LDA instruction for 32 bit values. - \param [in] ptr Pointer to data - \return value of type uint32_t at (*ptr) - */ -__STATIC_FORCEINLINE uint32_t __LDA(volatile uint32_t *ptr) -{ - uint32_t result; - - __ASM volatile ("lda %0, %1" : "=r" (result) : "Q" (*ptr) ); - return(result); -} - - -/** - \brief Store-Release (8 bit) - \details Executes a STLB instruction for 8 bit values. - \param [in] value Value to store - \param [in] ptr Pointer to location - */ -__STATIC_FORCEINLINE void __STLB(uint8_t value, volatile uint8_t *ptr) -{ - __ASM volatile ("stlb %1, %0" : "=Q" (*ptr) : "r" ((uint32_t)value) ); -} - - -/** - \brief Store-Release (16 bit) - \details Executes a STLH instruction for 16 bit values. - \param [in] value Value to store - \param [in] ptr Pointer to location - */ -__STATIC_FORCEINLINE void __STLH(uint16_t value, volatile uint16_t *ptr) -{ - __ASM volatile ("stlh %1, %0" : "=Q" (*ptr) : "r" ((uint32_t)value) ); -} - - -/** - \brief Store-Release (32 bit) - \details Executes a STL instruction for 32 bit values. - \param [in] value Value to store - \param [in] ptr Pointer to location - */ -__STATIC_FORCEINLINE void __STL(uint32_t value, volatile uint32_t *ptr) -{ - __ASM volatile ("stl %1, %0" : "=Q" (*ptr) : "r" ((uint32_t)value) ); -} - - -/** - \brief Load-Acquire Exclusive (8 bit) - \details Executes a LDAB exclusive instruction for 8 bit value. - \param [in] ptr Pointer to data - \return value of type uint8_t at (*ptr) - */ -#define __LDAEXB (uint8_t)__builtin_arm_ldaex - - -/** - \brief Load-Acquire Exclusive (16 bit) - \details Executes a LDAH exclusive instruction for 16 bit values. - \param [in] ptr Pointer to data - \return value of type uint16_t at (*ptr) - */ -#define __LDAEXH (uint16_t)__builtin_arm_ldaex - - -/** - \brief Load-Acquire Exclusive (32 bit) - \details Executes a LDA exclusive instruction for 32 bit values. - \param [in] ptr Pointer to data - \return value of type uint32_t at (*ptr) - */ -#define __LDAEX (uint32_t)__builtin_arm_ldaex - - -/** - \brief Store-Release Exclusive (8 bit) - \details Executes a STLB exclusive instruction for 8 bit values. - \param [in] value Value to store - \param [in] ptr Pointer to location - \return 0 Function succeeded - \return 1 Function failed - */ -#define __STLEXB (uint32_t)__builtin_arm_stlex - - -/** - \brief Store-Release Exclusive (16 bit) - \details Executes a STLH exclusive instruction for 16 bit values. - \param [in] value Value to store - \param [in] ptr Pointer to location - \return 0 Function succeeded - \return 1 Function failed - */ -#define __STLEXH (uint32_t)__builtin_arm_stlex - - -/** - \brief Store-Release Exclusive (32 bit) - \details Executes a STL exclusive instruction for 32 bit values. - \param [in] value Value to store - \param [in] ptr Pointer to location - \return 0 Function succeeded - \return 1 Function failed - */ -#define __STLEX (uint32_t)__builtin_arm_stlex - -#endif /* ((defined (__ARM_ARCH_8M_MAIN__ ) && (__ARM_ARCH_8M_MAIN__ == 1)) || \ - (defined (__ARM_ARCH_8M_BASE__ ) && (__ARM_ARCH_8M_BASE__ == 1)) ) */ - -/*@}*/ /* end of group CMSIS_Core_InstructionInterface */ - - -/* ################### Compiler specific Intrinsics ########################### */ -/** \defgroup CMSIS_SIMD_intrinsics CMSIS SIMD Intrinsics - Access to dedicated SIMD instructions - @{ -*/ - -#if (defined (__ARM_FEATURE_DSP) && (__ARM_FEATURE_DSP == 1)) - -__STATIC_FORCEINLINE uint32_t __SADD8(uint32_t op1, uint32_t op2) -{ - uint32_t result; - - __ASM volatile ("sadd8 %0, %1, %2" : "=r" (result) : "r" (op1), "r" (op2) ); - return(result); -} - -__STATIC_FORCEINLINE uint32_t __QADD8(uint32_t op1, uint32_t op2) -{ - uint32_t result; - - __ASM volatile ("qadd8 %0, %1, %2" : "=r" (result) : "r" (op1), "r" (op2) ); - return(result); -} - -__STATIC_FORCEINLINE uint32_t __SHADD8(uint32_t op1, uint32_t op2) -{ - uint32_t result; - - __ASM volatile ("shadd8 %0, %1, %2" : "=r" (result) : "r" (op1), "r" (op2) ); - return(result); -} - -__STATIC_FORCEINLINE uint32_t __UADD8(uint32_t op1, uint32_t op2) -{ - uint32_t result; - - __ASM volatile ("uadd8 %0, %1, %2" : "=r" (result) : "r" (op1), "r" (op2) ); - return(result); -} - -__STATIC_FORCEINLINE uint32_t __UQADD8(uint32_t op1, uint32_t op2) -{ - uint32_t result; - - __ASM volatile ("uqadd8 %0, %1, %2" : "=r" (result) : "r" (op1), "r" (op2) ); - return(result); -} - -__STATIC_FORCEINLINE uint32_t __UHADD8(uint32_t op1, uint32_t op2) -{ - uint32_t result; - - __ASM volatile ("uhadd8 %0, %1, %2" : "=r" (result) : "r" (op1), "r" (op2) ); - return(result); -} - - -__STATIC_FORCEINLINE uint32_t __SSUB8(uint32_t op1, uint32_t op2) -{ - uint32_t result; - - __ASM volatile ("ssub8 %0, %1, %2" : "=r" (result) : "r" (op1), "r" (op2) ); - return(result); -} - -__STATIC_FORCEINLINE uint32_t __QSUB8(uint32_t op1, uint32_t op2) -{ - uint32_t result; - - __ASM volatile ("qsub8 %0, %1, %2" : "=r" (result) : "r" (op1), "r" (op2) ); - return(result); -} - -__STATIC_FORCEINLINE uint32_t __SHSUB8(uint32_t op1, uint32_t op2) -{ - uint32_t result; - - __ASM volatile ("shsub8 %0, %1, %2" : "=r" (result) : "r" (op1), "r" (op2) ); - return(result); -} - -__STATIC_FORCEINLINE uint32_t __USUB8(uint32_t op1, uint32_t op2) -{ - uint32_t result; - - __ASM volatile ("usub8 %0, %1, %2" : "=r" (result) : "r" (op1), "r" (op2) ); - return(result); -} - -__STATIC_FORCEINLINE uint32_t __UQSUB8(uint32_t op1, uint32_t op2) -{ - uint32_t result; - - __ASM volatile ("uqsub8 %0, %1, %2" : "=r" (result) : "r" (op1), "r" (op2) ); - return(result); -} - -__STATIC_FORCEINLINE uint32_t __UHSUB8(uint32_t op1, uint32_t op2) -{ - uint32_t result; - - __ASM volatile ("uhsub8 %0, %1, %2" : "=r" (result) : "r" (op1), "r" (op2) ); - return(result); -} - - -__STATIC_FORCEINLINE uint32_t __SADD16(uint32_t op1, uint32_t op2) -{ - uint32_t result; - - __ASM volatile ("sadd16 %0, %1, %2" : "=r" (result) : "r" (op1), "r" (op2) ); - return(result); -} - -__STATIC_FORCEINLINE uint32_t __QADD16(uint32_t op1, uint32_t op2) -{ - uint32_t result; - - __ASM volatile ("qadd16 %0, %1, %2" : "=r" (result) : "r" (op1), "r" (op2) ); - return(result); -} - -__STATIC_FORCEINLINE uint32_t __SHADD16(uint32_t op1, uint32_t op2) -{ - uint32_t result; - - __ASM volatile ("shadd16 %0, %1, %2" : "=r" (result) : "r" (op1), "r" (op2) ); - return(result); -} - -__STATIC_FORCEINLINE uint32_t __UADD16(uint32_t op1, uint32_t op2) -{ - uint32_t result; - - __ASM volatile ("uadd16 %0, %1, %2" : "=r" (result) : "r" (op1), "r" (op2) ); - return(result); -} - -__STATIC_FORCEINLINE uint32_t __UQADD16(uint32_t op1, uint32_t op2) -{ - uint32_t result; - - __ASM volatile ("uqadd16 %0, %1, %2" : "=r" (result) : "r" (op1), "r" (op2) ); - return(result); -} - -__STATIC_FORCEINLINE uint32_t __UHADD16(uint32_t op1, uint32_t op2) -{ - uint32_t result; - - __ASM volatile ("uhadd16 %0, %1, %2" : "=r" (result) : "r" (op1), "r" (op2) ); - return(result); -} - -__STATIC_FORCEINLINE uint32_t __SSUB16(uint32_t op1, uint32_t op2) -{ - uint32_t result; - - __ASM volatile ("ssub16 %0, %1, %2" : "=r" (result) : "r" (op1), "r" (op2) ); - return(result); -} - -__STATIC_FORCEINLINE uint32_t __QSUB16(uint32_t op1, uint32_t op2) -{ - uint32_t result; - - __ASM volatile ("qsub16 %0, %1, %2" : "=r" (result) : "r" (op1), "r" (op2) ); - return(result); -} - -__STATIC_FORCEINLINE uint32_t __SHSUB16(uint32_t op1, uint32_t op2) -{ - uint32_t result; - - __ASM volatile ("shsub16 %0, %1, %2" : "=r" (result) : "r" (op1), "r" (op2) ); - return(result); -} - -__STATIC_FORCEINLINE uint32_t __USUB16(uint32_t op1, uint32_t op2) -{ - uint32_t result; - - __ASM volatile ("usub16 %0, %1, %2" : "=r" (result) : "r" (op1), "r" (op2) ); - return(result); -} - -__STATIC_FORCEINLINE uint32_t __UQSUB16(uint32_t op1, uint32_t op2) -{ - uint32_t result; - - __ASM volatile ("uqsub16 %0, %1, %2" : "=r" (result) : "r" (op1), "r" (op2) ); - return(result); -} - -__STATIC_FORCEINLINE uint32_t __UHSUB16(uint32_t op1, uint32_t op2) -{ - uint32_t result; - - __ASM volatile ("uhsub16 %0, %1, %2" : "=r" (result) : "r" (op1), "r" (op2) ); - return(result); -} - -__STATIC_FORCEINLINE uint32_t __SASX(uint32_t op1, uint32_t op2) -{ - uint32_t result; - - __ASM volatile ("sasx %0, %1, %2" : "=r" (result) : "r" (op1), "r" (op2) ); - return(result); -} - -__STATIC_FORCEINLINE uint32_t __QASX(uint32_t op1, uint32_t op2) -{ - uint32_t result; - - __ASM volatile ("qasx %0, %1, %2" : "=r" (result) : "r" (op1), "r" (op2) ); - return(result); -} - -__STATIC_FORCEINLINE uint32_t __SHASX(uint32_t op1, uint32_t op2) -{ - uint32_t result; - - __ASM volatile ("shasx %0, %1, %2" : "=r" (result) : "r" (op1), "r" (op2) ); - return(result); -} - -__STATIC_FORCEINLINE uint32_t __UASX(uint32_t op1, uint32_t op2) -{ - uint32_t result; - - __ASM volatile ("uasx %0, %1, %2" : "=r" (result) : "r" (op1), "r" (op2) ); - return(result); -} - -__STATIC_FORCEINLINE uint32_t __UQASX(uint32_t op1, uint32_t op2) -{ - uint32_t result; - - __ASM volatile ("uqasx %0, %1, %2" : "=r" (result) : "r" (op1), "r" (op2) ); - return(result); -} - -__STATIC_FORCEINLINE uint32_t __UHASX(uint32_t op1, uint32_t op2) -{ - uint32_t result; - - __ASM volatile ("uhasx %0, %1, %2" : "=r" (result) : "r" (op1), "r" (op2) ); - return(result); -} - -__STATIC_FORCEINLINE uint32_t __SSAX(uint32_t op1, uint32_t op2) -{ - uint32_t result; - - __ASM volatile ("ssax %0, %1, %2" : "=r" (result) : "r" (op1), "r" (op2) ); - return(result); -} - -__STATIC_FORCEINLINE uint32_t __QSAX(uint32_t op1, uint32_t op2) -{ - uint32_t result; - - __ASM volatile ("qsax %0, %1, %2" : "=r" (result) : "r" (op1), "r" (op2) ); - return(result); -} - -__STATIC_FORCEINLINE uint32_t __SHSAX(uint32_t op1, uint32_t op2) -{ - uint32_t result; - - __ASM volatile ("shsax %0, %1, %2" : "=r" (result) : "r" (op1), "r" (op2) ); - return(result); -} - -__STATIC_FORCEINLINE uint32_t __USAX(uint32_t op1, uint32_t op2) -{ - uint32_t result; - - __ASM volatile ("usax %0, %1, %2" : "=r" (result) : "r" (op1), "r" (op2) ); - return(result); -} - -__STATIC_FORCEINLINE uint32_t __UQSAX(uint32_t op1, uint32_t op2) -{ - uint32_t result; - - __ASM volatile ("uqsax %0, %1, %2" : "=r" (result) : "r" (op1), "r" (op2) ); - return(result); -} - -__STATIC_FORCEINLINE uint32_t __UHSAX(uint32_t op1, uint32_t op2) -{ - uint32_t result; - - __ASM volatile ("uhsax %0, %1, %2" : "=r" (result) : "r" (op1), "r" (op2) ); - return(result); -} - -__STATIC_FORCEINLINE uint32_t __USAD8(uint32_t op1, uint32_t op2) -{ - uint32_t result; - - __ASM volatile ("usad8 %0, %1, %2" : "=r" (result) : "r" (op1), "r" (op2) ); - return(result); -} - -__STATIC_FORCEINLINE uint32_t __USADA8(uint32_t op1, uint32_t op2, uint32_t op3) -{ - uint32_t result; - - __ASM volatile ("usada8 %0, %1, %2, %3" : "=r" (result) : "r" (op1), "r" (op2), "r" (op3) ); - return(result); -} - -#define __SSAT16(ARG1,ARG2) \ -({ \ - int32_t __RES, __ARG1 = (ARG1); \ - __ASM ("ssat16 %0, %1, %2" : "=r" (__RES) : "I" (ARG2), "r" (__ARG1) ); \ - __RES; \ - }) - -#define __USAT16(ARG1,ARG2) \ -({ \ - uint32_t __RES, __ARG1 = (ARG1); \ - __ASM ("usat16 %0, %1, %2" : "=r" (__RES) : "I" (ARG2), "r" (__ARG1) ); \ - __RES; \ - }) - -__STATIC_FORCEINLINE uint32_t __UXTB16(uint32_t op1) -{ - uint32_t result; - - __ASM volatile ("uxtb16 %0, %1" : "=r" (result) : "r" (op1)); - return(result); -} - -__STATIC_FORCEINLINE uint32_t __UXTAB16(uint32_t op1, uint32_t op2) -{ - uint32_t result; - - __ASM volatile ("uxtab16 %0, %1, %2" : "=r" (result) : "r" (op1), "r" (op2) ); - return(result); -} - -__STATIC_FORCEINLINE uint32_t __SXTB16(uint32_t op1) -{ - uint32_t result; - - __ASM volatile ("sxtb16 %0, %1" : "=r" (result) : "r" (op1)); - return(result); -} - -__STATIC_FORCEINLINE uint32_t __SXTAB16(uint32_t op1, uint32_t op2) -{ - uint32_t result; - - __ASM volatile ("sxtab16 %0, %1, %2" : "=r" (result) : "r" (op1), "r" (op2) ); - return(result); -} - -__STATIC_FORCEINLINE uint32_t __SMUAD (uint32_t op1, uint32_t op2) -{ - uint32_t result; - - __ASM volatile ("smuad %0, %1, %2" : "=r" (result) : "r" (op1), "r" (op2) ); - return(result); -} - -__STATIC_FORCEINLINE uint32_t __SMUADX (uint32_t op1, uint32_t op2) -{ - uint32_t result; - - __ASM volatile ("smuadx %0, %1, %2" : "=r" (result) : "r" (op1), "r" (op2) ); - return(result); -} - -__STATIC_FORCEINLINE uint32_t __SMLAD (uint32_t op1, uint32_t op2, uint32_t op3) -{ - uint32_t result; - - __ASM volatile ("smlad %0, %1, %2, %3" : "=r" (result) : "r" (op1), "r" (op2), "r" (op3) ); - return(result); -} - -__STATIC_FORCEINLINE uint32_t __SMLADX (uint32_t op1, uint32_t op2, uint32_t op3) -{ - uint32_t result; - - __ASM volatile ("smladx %0, %1, %2, %3" : "=r" (result) : "r" (op1), "r" (op2), "r" (op3) ); - return(result); -} - -__STATIC_FORCEINLINE uint64_t __SMLALD (uint32_t op1, uint32_t op2, uint64_t acc) -{ - union llreg_u{ - uint32_t w32[2]; - uint64_t w64; - } llr; - llr.w64 = acc; - -#ifndef __ARMEB__ /* Little endian */ - __ASM volatile ("smlald %0, %1, %2, %3" : "=r" (llr.w32[0]), "=r" (llr.w32[1]): "r" (op1), "r" (op2) , "0" (llr.w32[0]), "1" (llr.w32[1]) ); -#else /* Big endian */ - __ASM volatile ("smlald %0, %1, %2, %3" : "=r" (llr.w32[1]), "=r" (llr.w32[0]): "r" (op1), "r" (op2) , "0" (llr.w32[1]), "1" (llr.w32[0]) ); -#endif - - return(llr.w64); -} - -__STATIC_FORCEINLINE uint64_t __SMLALDX (uint32_t op1, uint32_t op2, uint64_t acc) -{ - union llreg_u{ - uint32_t w32[2]; - uint64_t w64; - } llr; - llr.w64 = acc; - -#ifndef __ARMEB__ /* Little endian */ - __ASM volatile ("smlaldx %0, %1, %2, %3" : "=r" (llr.w32[0]), "=r" (llr.w32[1]): "r" (op1), "r" (op2) , "0" (llr.w32[0]), "1" (llr.w32[1]) ); -#else /* Big endian */ - __ASM volatile ("smlaldx %0, %1, %2, %3" : "=r" (llr.w32[1]), "=r" (llr.w32[0]): "r" (op1), "r" (op2) , "0" (llr.w32[1]), "1" (llr.w32[0]) ); -#endif - - return(llr.w64); -} - -__STATIC_FORCEINLINE uint32_t __SMUSD (uint32_t op1, uint32_t op2) -{ - uint32_t result; - - __ASM volatile ("smusd %0, %1, %2" : "=r" (result) : "r" (op1), "r" (op2) ); - return(result); -} - -__STATIC_FORCEINLINE uint32_t __SMUSDX (uint32_t op1, uint32_t op2) -{ - uint32_t result; - - __ASM volatile ("smusdx %0, %1, %2" : "=r" (result) : "r" (op1), "r" (op2) ); - return(result); -} - -__STATIC_FORCEINLINE uint32_t __SMLSD (uint32_t op1, uint32_t op2, uint32_t op3) -{ - uint32_t result; - - __ASM volatile ("smlsd %0, %1, %2, %3" : "=r" (result) : "r" (op1), "r" (op2), "r" (op3) ); - return(result); -} - -__STATIC_FORCEINLINE uint32_t __SMLSDX (uint32_t op1, uint32_t op2, uint32_t op3) -{ - uint32_t result; - - __ASM volatile ("smlsdx %0, %1, %2, %3" : "=r" (result) : "r" (op1), "r" (op2), "r" (op3) ); - return(result); -} - -__STATIC_FORCEINLINE uint64_t __SMLSLD (uint32_t op1, uint32_t op2, uint64_t acc) -{ - union llreg_u{ - uint32_t w32[2]; - uint64_t w64; - } llr; - llr.w64 = acc; - -#ifndef __ARMEB__ /* Little endian */ - __ASM volatile ("smlsld %0, %1, %2, %3" : "=r" (llr.w32[0]), "=r" (llr.w32[1]): "r" (op1), "r" (op2) , "0" (llr.w32[0]), "1" (llr.w32[1]) ); -#else /* Big endian */ - __ASM volatile ("smlsld %0, %1, %2, %3" : "=r" (llr.w32[1]), "=r" (llr.w32[0]): "r" (op1), "r" (op2) , "0" (llr.w32[1]), "1" (llr.w32[0]) ); -#endif - - return(llr.w64); -} - -__STATIC_FORCEINLINE uint64_t __SMLSLDX (uint32_t op1, uint32_t op2, uint64_t acc) -{ - union llreg_u{ - uint32_t w32[2]; - uint64_t w64; - } llr; - llr.w64 = acc; - -#ifndef __ARMEB__ /* Little endian */ - __ASM volatile ("smlsldx %0, %1, %2, %3" : "=r" (llr.w32[0]), "=r" (llr.w32[1]): "r" (op1), "r" (op2) , "0" (llr.w32[0]), "1" (llr.w32[1]) ); -#else /* Big endian */ - __ASM volatile ("smlsldx %0, %1, %2, %3" : "=r" (llr.w32[1]), "=r" (llr.w32[0]): "r" (op1), "r" (op2) , "0" (llr.w32[1]), "1" (llr.w32[0]) ); -#endif - - return(llr.w64); -} - -__STATIC_FORCEINLINE uint32_t __SEL (uint32_t op1, uint32_t op2) -{ - uint32_t result; - - __ASM volatile ("sel %0, %1, %2" : "=r" (result) : "r" (op1), "r" (op2) ); - return(result); -} - -__STATIC_FORCEINLINE int32_t __QADD( int32_t op1, int32_t op2) -{ - int32_t result; - - __ASM volatile ("qadd %0, %1, %2" : "=r" (result) : "r" (op1), "r" (op2) ); - return(result); -} - -__STATIC_FORCEINLINE int32_t __QSUB( int32_t op1, int32_t op2) -{ - int32_t result; - - __ASM volatile ("qsub %0, %1, %2" : "=r" (result) : "r" (op1), "r" (op2) ); - return(result); -} - -#if 0 -#define __PKHBT(ARG1,ARG2,ARG3) \ -({ \ - uint32_t __RES, __ARG1 = (ARG1), __ARG2 = (ARG2); \ - __ASM ("pkhbt %0, %1, %2, lsl %3" : "=r" (__RES) : "r" (__ARG1), "r" (__ARG2), "I" (ARG3) ); \ - __RES; \ - }) - -#define __PKHTB(ARG1,ARG2,ARG3) \ -({ \ - uint32_t __RES, __ARG1 = (ARG1), __ARG2 = (ARG2); \ - if (ARG3 == 0) \ - __ASM ("pkhtb %0, %1, %2" : "=r" (__RES) : "r" (__ARG1), "r" (__ARG2) ); \ - else \ - __ASM ("pkhtb %0, %1, %2, asr %3" : "=r" (__RES) : "r" (__ARG1), "r" (__ARG2), "I" (ARG3) ); \ - __RES; \ - }) -#endif - -#define __PKHBT(ARG1,ARG2,ARG3) ( ((((uint32_t)(ARG1)) ) & 0x0000FFFFUL) | \ - ((((uint32_t)(ARG2)) << (ARG3)) & 0xFFFF0000UL) ) - -#define __PKHTB(ARG1,ARG2,ARG3) ( ((((uint32_t)(ARG1)) ) & 0xFFFF0000UL) | \ - ((((uint32_t)(ARG2)) >> (ARG3)) & 0x0000FFFFUL) ) - -__STATIC_FORCEINLINE int32_t __SMMLA (int32_t op1, int32_t op2, int32_t op3) -{ - int32_t result; - - __ASM volatile ("smmla %0, %1, %2, %3" : "=r" (result): "r" (op1), "r" (op2), "r" (op3) ); - return(result); -} - -#endif /* (__ARM_FEATURE_DSP == 1) */ -/*@} end of group CMSIS_SIMD_intrinsics */ - - -#endif /* __CMSIS_ARMCLANG_H */ diff --git a/test_dma/Drivers/CMSIS/Include/cmsis_compiler.h b/test_dma/Drivers/CMSIS/Include/cmsis_compiler.h deleted file mode 100644 index 79a2cac..0000000 --- a/test_dma/Drivers/CMSIS/Include/cmsis_compiler.h +++ /dev/null @@ -1,266 +0,0 @@ -/**************************************************************************//** - * @file cmsis_compiler.h - * @brief CMSIS compiler generic header file - * @version V5.0.4 - * @date 10. January 2018 - ******************************************************************************/ -/* - * Copyright (c) 2009-2018 Arm Limited. All rights reserved. - * - * SPDX-License-Identifier: Apache-2.0 - * - * Licensed under the Apache License, Version 2.0 (the License); you may - * not use this file except in compliance with the License. - * You may obtain a copy of the License at - * - * www.apache.org/licenses/LICENSE-2.0 - * - * Unless required by applicable law or agreed to in writing, software - * distributed under the License is distributed on an AS IS BASIS, WITHOUT - * WARRANTIES OR CONDITIONS OF ANY KIND, either express or implied. - * See the License for the specific language governing permissions and - * limitations under the License. - */ - -#ifndef __CMSIS_COMPILER_H -#define __CMSIS_COMPILER_H - -#include - -/* - * Arm Compiler 4/5 - */ -#if defined ( __CC_ARM ) - #include "cmsis_armcc.h" - - -/* - * Arm Compiler 6 (armclang) - */ -#elif defined (__ARMCC_VERSION) && (__ARMCC_VERSION >= 6010050) - #include "cmsis_armclang.h" - - -/* - * GNU Compiler - */ -#elif defined ( __GNUC__ ) - #include "cmsis_gcc.h" - - -/* - * IAR Compiler - */ -#elif defined ( __ICCARM__ ) - #include - - -/* - * TI Arm Compiler - */ -#elif defined ( __TI_ARM__ ) - #include - - #ifndef __ASM - #define __ASM __asm - #endif - #ifndef __INLINE - #define __INLINE inline - #endif - #ifndef __STATIC_INLINE - #define __STATIC_INLINE static inline - #endif - #ifndef __STATIC_FORCEINLINE - #define __STATIC_FORCEINLINE __STATIC_INLINE - #endif - #ifndef __NO_RETURN - #define __NO_RETURN __attribute__((noreturn)) - #endif - #ifndef __USED - #define __USED __attribute__((used)) - #endif - #ifndef __WEAK - #define __WEAK __attribute__((weak)) - #endif - #ifndef __PACKED - #define __PACKED __attribute__((packed)) - #endif - #ifndef __PACKED_STRUCT - #define __PACKED_STRUCT struct __attribute__((packed)) - #endif - #ifndef __PACKED_UNION - #define __PACKED_UNION union __attribute__((packed)) - #endif - #ifndef __UNALIGNED_UINT32 /* deprecated */ - struct __attribute__((packed)) T_UINT32 { uint32_t v; }; - #define __UNALIGNED_UINT32(x) (((struct T_UINT32 *)(x))->v) - #endif - #ifndef __UNALIGNED_UINT16_WRITE - __PACKED_STRUCT T_UINT16_WRITE { uint16_t v; }; - #define __UNALIGNED_UINT16_WRITE(addr, val) (void)((((struct T_UINT16_WRITE *)(void*)(addr))->v) = (val)) - #endif - #ifndef __UNALIGNED_UINT16_READ - __PACKED_STRUCT T_UINT16_READ { uint16_t v; }; - #define __UNALIGNED_UINT16_READ(addr) (((const struct T_UINT16_READ *)(const void *)(addr))->v) - #endif - #ifndef __UNALIGNED_UINT32_WRITE - __PACKED_STRUCT T_UINT32_WRITE { uint32_t v; }; - #define __UNALIGNED_UINT32_WRITE(addr, val) (void)((((struct T_UINT32_WRITE *)(void *)(addr))->v) = (val)) - #endif - #ifndef __UNALIGNED_UINT32_READ - __PACKED_STRUCT T_UINT32_READ { uint32_t v; }; - #define __UNALIGNED_UINT32_READ(addr) (((const struct T_UINT32_READ *)(const void *)(addr))->v) - #endif - #ifndef __ALIGNED - #define __ALIGNED(x) __attribute__((aligned(x))) - #endif - #ifndef __RESTRICT - #warning No compiler specific solution for __RESTRICT. __RESTRICT is ignored. - #define __RESTRICT - #endif - - -/* - * TASKING Compiler - */ -#elif defined ( __TASKING__ ) - /* - * The CMSIS functions have been implemented as intrinsics in the compiler. - * Please use "carm -?i" to get an up to date list of all intrinsics, - * Including the CMSIS ones. - */ - - #ifndef __ASM - #define __ASM __asm - #endif - #ifndef __INLINE - #define __INLINE inline - #endif - #ifndef __STATIC_INLINE - #define __STATIC_INLINE static inline - #endif - #ifndef __STATIC_FORCEINLINE - #define __STATIC_FORCEINLINE __STATIC_INLINE - #endif - #ifndef __NO_RETURN - #define __NO_RETURN __attribute__((noreturn)) - #endif - #ifndef __USED - #define __USED __attribute__((used)) - #endif - #ifndef __WEAK - #define __WEAK __attribute__((weak)) - #endif - #ifndef __PACKED - #define __PACKED __packed__ - #endif - #ifndef __PACKED_STRUCT - #define __PACKED_STRUCT struct __packed__ - #endif - #ifndef __PACKED_UNION - #define __PACKED_UNION union __packed__ - #endif - #ifndef __UNALIGNED_UINT32 /* deprecated */ - struct __packed__ T_UINT32 { uint32_t v; }; - #define __UNALIGNED_UINT32(x) (((struct T_UINT32 *)(x))->v) - #endif - #ifndef __UNALIGNED_UINT16_WRITE - __PACKED_STRUCT T_UINT16_WRITE { uint16_t v; }; - #define __UNALIGNED_UINT16_WRITE(addr, val) (void)((((struct T_UINT16_WRITE *)(void *)(addr))->v) = (val)) - #endif - #ifndef __UNALIGNED_UINT16_READ - __PACKED_STRUCT T_UINT16_READ { uint16_t v; }; - #define __UNALIGNED_UINT16_READ(addr) (((const struct T_UINT16_READ *)(const void *)(addr))->v) - #endif - #ifndef __UNALIGNED_UINT32_WRITE - __PACKED_STRUCT T_UINT32_WRITE { uint32_t v; }; - #define __UNALIGNED_UINT32_WRITE(addr, val) (void)((((struct T_UINT32_WRITE *)(void *)(addr))->v) = (val)) - #endif - #ifndef __UNALIGNED_UINT32_READ - __PACKED_STRUCT T_UINT32_READ { uint32_t v; }; - #define __UNALIGNED_UINT32_READ(addr) (((const struct T_UINT32_READ *)(const void *)(addr))->v) - #endif - #ifndef __ALIGNED - #define __ALIGNED(x) __align(x) - #endif - #ifndef __RESTRICT - #warning No compiler specific solution for __RESTRICT. __RESTRICT is ignored. - #define __RESTRICT - #endif - - -/* - * COSMIC Compiler - */ -#elif defined ( __CSMC__ ) - #include - - #ifndef __ASM - #define __ASM _asm - #endif - #ifndef __INLINE - #define __INLINE inline - #endif - #ifndef __STATIC_INLINE - #define __STATIC_INLINE static inline - #endif - #ifndef __STATIC_FORCEINLINE - #define __STATIC_FORCEINLINE __STATIC_INLINE - #endif - #ifndef __NO_RETURN - // NO RETURN is automatically detected hence no warning here - #define __NO_RETURN - #endif - #ifndef __USED - #warning No compiler specific solution for __USED. __USED is ignored. - #define __USED - #endif - #ifndef __WEAK - #define __WEAK __weak - #endif - #ifndef __PACKED - #define __PACKED @packed - #endif - #ifndef __PACKED_STRUCT - #define __PACKED_STRUCT @packed struct - #endif - #ifndef __PACKED_UNION - #define __PACKED_UNION @packed union - #endif - #ifndef __UNALIGNED_UINT32 /* deprecated */ - @packed struct T_UINT32 { uint32_t v; }; - #define __UNALIGNED_UINT32(x) (((struct T_UINT32 *)(x))->v) - #endif - #ifndef __UNALIGNED_UINT16_WRITE - __PACKED_STRUCT T_UINT16_WRITE { uint16_t v; }; - #define __UNALIGNED_UINT16_WRITE(addr, val) (void)((((struct T_UINT16_WRITE *)(void *)(addr))->v) = (val)) - #endif - #ifndef __UNALIGNED_UINT16_READ - __PACKED_STRUCT T_UINT16_READ { uint16_t v; }; - #define __UNALIGNED_UINT16_READ(addr) (((const struct T_UINT16_READ *)(const void *)(addr))->v) - #endif - #ifndef __UNALIGNED_UINT32_WRITE - __PACKED_STRUCT T_UINT32_WRITE { uint32_t v; }; - #define __UNALIGNED_UINT32_WRITE(addr, val) (void)((((struct T_UINT32_WRITE *)(void *)(addr))->v) = (val)) - #endif - #ifndef __UNALIGNED_UINT32_READ - __PACKED_STRUCT T_UINT32_READ { uint32_t v; }; - #define __UNALIGNED_UINT32_READ(addr) (((const struct T_UINT32_READ *)(const void *)(addr))->v) - #endif - #ifndef __ALIGNED - #warning No compiler specific solution for __ALIGNED. __ALIGNED is ignored. - #define __ALIGNED(x) - #endif - #ifndef __RESTRICT - #warning No compiler specific solution for __RESTRICT. __RESTRICT is ignored. - #define __RESTRICT - #endif - - -#else - #error Unknown compiler. -#endif - - -#endif /* __CMSIS_COMPILER_H */ - diff --git a/test_dma/Drivers/CMSIS/Include/cmsis_gcc.h b/test_dma/Drivers/CMSIS/Include/cmsis_gcc.h deleted file mode 100644 index 1bd41a4..0000000 --- a/test_dma/Drivers/CMSIS/Include/cmsis_gcc.h +++ /dev/null @@ -1,2085 +0,0 @@ -/**************************************************************************//** - * @file cmsis_gcc.h - * @brief CMSIS compiler GCC header file - * @version V5.0.4 - * @date 09. April 2018 - ******************************************************************************/ -/* - * Copyright (c) 2009-2018 Arm Limited. All rights reserved. - * - * SPDX-License-Identifier: Apache-2.0 - * - * Licensed under the Apache License, Version 2.0 (the License); you may - * not use this file except in compliance with the License. - * You may obtain a copy of the License at - * - * www.apache.org/licenses/LICENSE-2.0 - * - * Unless required by applicable law or agreed to in writing, software - * distributed under the License is distributed on an AS IS BASIS, WITHOUT - * WARRANTIES OR CONDITIONS OF ANY KIND, either express or implied. - * See the License for the specific language governing permissions and - * limitations under the License. - */ - -#ifndef __CMSIS_GCC_H -#define __CMSIS_GCC_H - -/* ignore some GCC warnings */ -#pragma GCC diagnostic push -#pragma GCC diagnostic ignored "-Wsign-conversion" -#pragma GCC diagnostic ignored "-Wconversion" -#pragma GCC diagnostic ignored "-Wunused-parameter" - -/* Fallback for __has_builtin */ -#ifndef __has_builtin - #define __has_builtin(x) (0) -#endif - -/* CMSIS compiler specific defines */ -#ifndef __ASM - #define __ASM __asm -#endif -#ifndef __INLINE - #define __INLINE inline -#endif -#ifndef __STATIC_INLINE - #define __STATIC_INLINE static inline -#endif -#ifndef __STATIC_FORCEINLINE - #define __STATIC_FORCEINLINE __attribute__((always_inline)) static inline -#endif -#ifndef __NO_RETURN - #define __NO_RETURN __attribute__((__noreturn__)) -#endif -#ifndef __USED - #define __USED __attribute__((used)) -#endif -#ifndef __WEAK - #define __WEAK __attribute__((weak)) -#endif -#ifndef __PACKED - #define __PACKED __attribute__((packed, aligned(1))) -#endif -#ifndef __PACKED_STRUCT - #define __PACKED_STRUCT struct __attribute__((packed, aligned(1))) -#endif -#ifndef __PACKED_UNION - #define __PACKED_UNION union __attribute__((packed, aligned(1))) -#endif -#ifndef __UNALIGNED_UINT32 /* deprecated */ - #pragma GCC diagnostic push - #pragma GCC diagnostic ignored "-Wpacked" - #pragma GCC diagnostic ignored "-Wattributes" - struct __attribute__((packed)) T_UINT32 { uint32_t v; }; - #pragma GCC diagnostic pop - #define __UNALIGNED_UINT32(x) (((struct T_UINT32 *)(x))->v) -#endif -#ifndef __UNALIGNED_UINT16_WRITE - #pragma GCC diagnostic push - #pragma GCC diagnostic ignored "-Wpacked" - #pragma GCC diagnostic ignored "-Wattributes" - __PACKED_STRUCT T_UINT16_WRITE { uint16_t v; }; - #pragma GCC diagnostic pop - #define __UNALIGNED_UINT16_WRITE(addr, val) (void)((((struct T_UINT16_WRITE *)(void *)(addr))->v) = (val)) -#endif -#ifndef __UNALIGNED_UINT16_READ - #pragma GCC diagnostic push - #pragma GCC diagnostic ignored "-Wpacked" - #pragma GCC diagnostic ignored "-Wattributes" - __PACKED_STRUCT T_UINT16_READ { uint16_t v; }; - #pragma GCC diagnostic pop - #define __UNALIGNED_UINT16_READ(addr) (((const struct T_UINT16_READ *)(const void *)(addr))->v) -#endif -#ifndef __UNALIGNED_UINT32_WRITE - #pragma GCC diagnostic push - #pragma GCC diagnostic ignored "-Wpacked" - #pragma GCC diagnostic ignored "-Wattributes" - __PACKED_STRUCT T_UINT32_WRITE { uint32_t v; }; - #pragma GCC diagnostic pop - #define __UNALIGNED_UINT32_WRITE(addr, val) (void)((((struct T_UINT32_WRITE *)(void *)(addr))->v) = (val)) -#endif -#ifndef __UNALIGNED_UINT32_READ - #pragma GCC diagnostic push - #pragma GCC diagnostic ignored "-Wpacked" - #pragma GCC diagnostic ignored "-Wattributes" - __PACKED_STRUCT T_UINT32_READ { uint32_t v; }; - #pragma GCC diagnostic pop - #define __UNALIGNED_UINT32_READ(addr) (((const struct T_UINT32_READ *)(const void *)(addr))->v) -#endif -#ifndef __ALIGNED - #define __ALIGNED(x) __attribute__((aligned(x))) -#endif -#ifndef __RESTRICT - #define __RESTRICT __restrict -#endif - - -/* ########################### Core Function Access ########################### */ -/** \ingroup CMSIS_Core_FunctionInterface - \defgroup CMSIS_Core_RegAccFunctions CMSIS Core Register Access Functions - @{ - */ - -/** - \brief Enable IRQ Interrupts - \details Enables IRQ interrupts by clearing the I-bit in the CPSR. - Can only be executed in Privileged modes. - */ -__STATIC_FORCEINLINE void __enable_irq(void) -{ - __ASM volatile ("cpsie i" : : : "memory"); -} - - -/** - \brief Disable IRQ Interrupts - \details Disables IRQ interrupts by setting the I-bit in the CPSR. - Can only be executed in Privileged modes. - */ -__STATIC_FORCEINLINE void __disable_irq(void) -{ - __ASM volatile ("cpsid i" : : : "memory"); -} - - -/** - \brief Get Control Register - \details Returns the content of the Control Register. - \return Control Register value - */ -__STATIC_FORCEINLINE uint32_t __get_CONTROL(void) -{ - uint32_t result; - - __ASM volatile ("MRS %0, control" : "=r" (result) ); - return(result); -} - - -#if (defined (__ARM_FEATURE_CMSE ) && (__ARM_FEATURE_CMSE == 3)) -/** - \brief Get Control Register (non-secure) - \details Returns the content of the non-secure Control Register when in secure mode. - \return non-secure Control Register value - */ -__STATIC_FORCEINLINE uint32_t __TZ_get_CONTROL_NS(void) -{ - uint32_t result; - - __ASM volatile ("MRS %0, control_ns" : "=r" (result) ); - return(result); -} -#endif - - -/** - \brief Set Control Register - \details Writes the given value to the Control Register. - \param [in] control Control Register value to set - */ -__STATIC_FORCEINLINE void __set_CONTROL(uint32_t control) -{ - __ASM volatile ("MSR control, %0" : : "r" (control) : "memory"); -} - - -#if (defined (__ARM_FEATURE_CMSE ) && (__ARM_FEATURE_CMSE == 3)) -/** - \brief Set Control Register (non-secure) - \details Writes the given value to the non-secure Control Register when in secure state. - \param [in] control Control Register value to set - */ -__STATIC_FORCEINLINE void __TZ_set_CONTROL_NS(uint32_t control) -{ - __ASM volatile ("MSR control_ns, %0" : : "r" (control) : "memory"); -} -#endif - - -/** - \brief Get IPSR Register - \details Returns the content of the IPSR Register. - \return IPSR Register value - */ -__STATIC_FORCEINLINE uint32_t __get_IPSR(void) -{ - uint32_t result; - - __ASM volatile ("MRS %0, ipsr" : "=r" (result) ); - return(result); -} - - -/** - \brief Get APSR Register - \details Returns the content of the APSR Register. - \return APSR Register value - */ -__STATIC_FORCEINLINE uint32_t __get_APSR(void) -{ - uint32_t result; - - __ASM volatile ("MRS %0, apsr" : "=r" (result) ); - return(result); -} - - -/** - \brief Get xPSR Register - \details Returns the content of the xPSR Register. - \return xPSR Register value - */ -__STATIC_FORCEINLINE uint32_t __get_xPSR(void) -{ - uint32_t result; - - __ASM volatile ("MRS %0, xpsr" : "=r" (result) ); - return(result); -} - - -/** - \brief Get Process Stack Pointer - \details Returns the current value of the Process Stack Pointer (PSP). - \return PSP Register value - */ -__STATIC_FORCEINLINE uint32_t __get_PSP(void) -{ - uint32_t result; - - __ASM volatile ("MRS %0, psp" : "=r" (result) ); - return(result); -} - - -#if (defined (__ARM_FEATURE_CMSE ) && (__ARM_FEATURE_CMSE == 3)) -/** - \brief Get Process Stack Pointer (non-secure) - \details Returns the current value of the non-secure Process Stack Pointer (PSP) when in secure state. - \return PSP Register value - */ -__STATIC_FORCEINLINE uint32_t __TZ_get_PSP_NS(void) -{ - uint32_t result; - - __ASM volatile ("MRS %0, psp_ns" : "=r" (result) ); - return(result); -} -#endif - - -/** - \brief Set Process Stack Pointer - \details Assigns the given value to the Process Stack Pointer (PSP). - \param [in] topOfProcStack Process Stack Pointer value to set - */ -__STATIC_FORCEINLINE void __set_PSP(uint32_t topOfProcStack) -{ - __ASM volatile ("MSR psp, %0" : : "r" (topOfProcStack) : ); -} - - -#if (defined (__ARM_FEATURE_CMSE ) && (__ARM_FEATURE_CMSE == 3)) -/** - \brief Set Process Stack Pointer (non-secure) - \details Assigns the given value to the non-secure Process Stack Pointer (PSP) when in secure state. - \param [in] topOfProcStack Process Stack Pointer value to set - */ -__STATIC_FORCEINLINE void __TZ_set_PSP_NS(uint32_t topOfProcStack) -{ - __ASM volatile ("MSR psp_ns, %0" : : "r" (topOfProcStack) : ); -} -#endif - - -/** - \brief Get Main Stack Pointer - \details Returns the current value of the Main Stack Pointer (MSP). - \return MSP Register value - */ -__STATIC_FORCEINLINE uint32_t __get_MSP(void) -{ - uint32_t result; - - __ASM volatile ("MRS %0, msp" : "=r" (result) ); - return(result); -} - - -#if (defined (__ARM_FEATURE_CMSE ) && (__ARM_FEATURE_CMSE == 3)) -/** - \brief Get Main Stack Pointer (non-secure) - \details Returns the current value of the non-secure Main Stack Pointer (MSP) when in secure state. - \return MSP Register value - */ -__STATIC_FORCEINLINE uint32_t __TZ_get_MSP_NS(void) -{ - uint32_t result; - - __ASM volatile ("MRS %0, msp_ns" : "=r" (result) ); - return(result); -} -#endif - - -/** - \brief Set Main Stack Pointer - \details Assigns the given value to the Main Stack Pointer (MSP). - \param [in] topOfMainStack Main Stack Pointer value to set - */ -__STATIC_FORCEINLINE void __set_MSP(uint32_t topOfMainStack) -{ - __ASM volatile ("MSR msp, %0" : : "r" (topOfMainStack) : ); -} - - -#if (defined (__ARM_FEATURE_CMSE ) && (__ARM_FEATURE_CMSE == 3)) -/** - \brief Set Main Stack Pointer (non-secure) - \details Assigns the given value to the non-secure Main Stack Pointer (MSP) when in secure state. - \param [in] topOfMainStack Main Stack Pointer value to set - */ -__STATIC_FORCEINLINE void __TZ_set_MSP_NS(uint32_t topOfMainStack) -{ - __ASM volatile ("MSR msp_ns, %0" : : "r" (topOfMainStack) : ); -} -#endif - - -#if (defined (__ARM_FEATURE_CMSE ) && (__ARM_FEATURE_CMSE == 3)) -/** - \brief Get Stack Pointer (non-secure) - \details Returns the current value of the non-secure Stack Pointer (SP) when in secure state. - \return SP Register value - */ -__STATIC_FORCEINLINE uint32_t __TZ_get_SP_NS(void) -{ - uint32_t result; - - __ASM volatile ("MRS %0, sp_ns" : "=r" (result) ); - return(result); -} - - -/** - \brief Set Stack Pointer (non-secure) - \details Assigns the given value to the non-secure Stack Pointer (SP) when in secure state. - \param [in] topOfStack Stack Pointer value to set - */ -__STATIC_FORCEINLINE void __TZ_set_SP_NS(uint32_t topOfStack) -{ - __ASM volatile ("MSR sp_ns, %0" : : "r" (topOfStack) : ); -} -#endif - - -/** - \brief Get Priority Mask - \details Returns the current state of the priority mask bit from the Priority Mask Register. - \return Priority Mask value - */ -__STATIC_FORCEINLINE uint32_t __get_PRIMASK(void) -{ - uint32_t result; - - __ASM volatile ("MRS %0, primask" : "=r" (result) :: "memory"); - return(result); -} - - -#if (defined (__ARM_FEATURE_CMSE ) && (__ARM_FEATURE_CMSE == 3)) -/** - \brief Get Priority Mask (non-secure) - \details Returns the current state of the non-secure priority mask bit from the Priority Mask Register when in secure state. - \return Priority Mask value - */ -__STATIC_FORCEINLINE uint32_t __TZ_get_PRIMASK_NS(void) -{ - uint32_t result; - - __ASM volatile ("MRS %0, primask_ns" : "=r" (result) :: "memory"); - return(result); -} -#endif - - -/** - \brief Set Priority Mask - \details Assigns the given value to the Priority Mask Register. - \param [in] priMask Priority Mask - */ -__STATIC_FORCEINLINE void __set_PRIMASK(uint32_t priMask) -{ - __ASM volatile ("MSR primask, %0" : : "r" (priMask) : "memory"); -} - - -#if (defined (__ARM_FEATURE_CMSE ) && (__ARM_FEATURE_CMSE == 3)) -/** - \brief Set Priority Mask (non-secure) - \details Assigns the given value to the non-secure Priority Mask Register when in secure state. - \param [in] priMask Priority Mask - */ -__STATIC_FORCEINLINE void __TZ_set_PRIMASK_NS(uint32_t priMask) -{ - __ASM volatile ("MSR primask_ns, %0" : : "r" (priMask) : "memory"); -} -#endif - - -#if ((defined (__ARM_ARCH_7M__ ) && (__ARM_ARCH_7M__ == 1)) || \ - (defined (__ARM_ARCH_7EM__ ) && (__ARM_ARCH_7EM__ == 1)) || \ - (defined (__ARM_ARCH_8M_MAIN__ ) && (__ARM_ARCH_8M_MAIN__ == 1)) ) -/** - \brief Enable FIQ - \details Enables FIQ interrupts by clearing the F-bit in the CPSR. - Can only be executed in Privileged modes. - */ -__STATIC_FORCEINLINE void __enable_fault_irq(void) -{ - __ASM volatile ("cpsie f" : : : "memory"); -} - - -/** - \brief Disable FIQ - \details Disables FIQ interrupts by setting the F-bit in the CPSR. - Can only be executed in Privileged modes. - */ -__STATIC_FORCEINLINE void __disable_fault_irq(void) -{ - __ASM volatile ("cpsid f" : : : "memory"); -} - - -/** - \brief Get Base Priority - \details Returns the current value of the Base Priority register. - \return Base Priority register value - */ -__STATIC_FORCEINLINE uint32_t __get_BASEPRI(void) -{ - uint32_t result; - - __ASM volatile ("MRS %0, basepri" : "=r" (result) ); - return(result); -} - - -#if (defined (__ARM_FEATURE_CMSE ) && (__ARM_FEATURE_CMSE == 3)) -/** - \brief Get Base Priority (non-secure) - \details Returns the current value of the non-secure Base Priority register when in secure state. - \return Base Priority register value - */ -__STATIC_FORCEINLINE uint32_t __TZ_get_BASEPRI_NS(void) -{ - uint32_t result; - - __ASM volatile ("MRS %0, basepri_ns" : "=r" (result) ); - return(result); -} -#endif - - -/** - \brief Set Base Priority - \details Assigns the given value to the Base Priority register. - \param [in] basePri Base Priority value to set - */ -__STATIC_FORCEINLINE void __set_BASEPRI(uint32_t basePri) -{ - __ASM volatile ("MSR basepri, %0" : : "r" (basePri) : "memory"); -} - - -#if (defined (__ARM_FEATURE_CMSE ) && (__ARM_FEATURE_CMSE == 3)) -/** - \brief Set Base Priority (non-secure) - \details Assigns the given value to the non-secure Base Priority register when in secure state. - \param [in] basePri Base Priority value to set - */ -__STATIC_FORCEINLINE void __TZ_set_BASEPRI_NS(uint32_t basePri) -{ - __ASM volatile ("MSR basepri_ns, %0" : : "r" (basePri) : "memory"); -} -#endif - - -/** - \brief Set Base Priority with condition - \details Assigns the given value to the Base Priority register only if BASEPRI masking is disabled, - or the new value increases the BASEPRI priority level. - \param [in] basePri Base Priority value to set - */ -__STATIC_FORCEINLINE void __set_BASEPRI_MAX(uint32_t basePri) -{ - __ASM volatile ("MSR basepri_max, %0" : : "r" (basePri) : "memory"); -} - - -/** - \brief Get Fault Mask - \details Returns the current value of the Fault Mask register. - \return Fault Mask register value - */ -__STATIC_FORCEINLINE uint32_t __get_FAULTMASK(void) -{ - uint32_t result; - - __ASM volatile ("MRS %0, faultmask" : "=r" (result) ); - return(result); -} - - -#if (defined (__ARM_FEATURE_CMSE ) && (__ARM_FEATURE_CMSE == 3)) -/** - \brief Get Fault Mask (non-secure) - \details Returns the current value of the non-secure Fault Mask register when in secure state. - \return Fault Mask register value - */ -__STATIC_FORCEINLINE uint32_t __TZ_get_FAULTMASK_NS(void) -{ - uint32_t result; - - __ASM volatile ("MRS %0, faultmask_ns" : "=r" (result) ); - return(result); -} -#endif - - -/** - \brief Set Fault Mask - \details Assigns the given value to the Fault Mask register. - \param [in] faultMask Fault Mask value to set - */ -__STATIC_FORCEINLINE void __set_FAULTMASK(uint32_t faultMask) -{ - __ASM volatile ("MSR faultmask, %0" : : "r" (faultMask) : "memory"); -} - - -#if (defined (__ARM_FEATURE_CMSE ) && (__ARM_FEATURE_CMSE == 3)) -/** - \brief Set Fault Mask (non-secure) - \details Assigns the given value to the non-secure Fault Mask register when in secure state. - \param [in] faultMask Fault Mask value to set - */ -__STATIC_FORCEINLINE void __TZ_set_FAULTMASK_NS(uint32_t faultMask) -{ - __ASM volatile ("MSR faultmask_ns, %0" : : "r" (faultMask) : "memory"); -} -#endif - -#endif /* ((defined (__ARM_ARCH_7M__ ) && (__ARM_ARCH_7M__ == 1)) || \ - (defined (__ARM_ARCH_7EM__ ) && (__ARM_ARCH_7EM__ == 1)) || \ - (defined (__ARM_ARCH_8M_MAIN__ ) && (__ARM_ARCH_8M_MAIN__ == 1)) ) */ - - -#if ((defined (__ARM_ARCH_8M_MAIN__ ) && (__ARM_ARCH_8M_MAIN__ == 1)) || \ - (defined (__ARM_ARCH_8M_BASE__ ) && (__ARM_ARCH_8M_BASE__ == 1)) ) - -/** - \brief Get Process Stack Pointer Limit - Devices without ARMv8-M Main Extensions (i.e. Cortex-M23) lack the non-secure - Stack Pointer Limit register hence zero is returned always in non-secure - mode. - - \details Returns the current value of the Process Stack Pointer Limit (PSPLIM). - \return PSPLIM Register value - */ -__STATIC_FORCEINLINE uint32_t __get_PSPLIM(void) -{ -#if (!(defined (__ARM_ARCH_8M_MAIN__ ) && (__ARM_ARCH_8M_MAIN__ == 1)) && \ - (!defined (__ARM_FEATURE_CMSE) || (__ARM_FEATURE_CMSE < 3))) - // without main extensions, the non-secure PSPLIM is RAZ/WI - return 0U; -#else - uint32_t result; - __ASM volatile ("MRS %0, psplim" : "=r" (result) ); - return result; -#endif -} - -#if (defined (__ARM_FEATURE_CMSE) && (__ARM_FEATURE_CMSE == 3)) -/** - \brief Get Process Stack Pointer Limit (non-secure) - Devices without ARMv8-M Main Extensions (i.e. Cortex-M23) lack the non-secure - Stack Pointer Limit register hence zero is returned always. - - \details Returns the current value of the non-secure Process Stack Pointer Limit (PSPLIM) when in secure state. - \return PSPLIM Register value - */ -__STATIC_FORCEINLINE uint32_t __TZ_get_PSPLIM_NS(void) -{ -#if (!(defined (__ARM_ARCH_8M_MAIN__ ) && (__ARM_ARCH_8M_MAIN__ == 1))) - // without main extensions, the non-secure PSPLIM is RAZ/WI - return 0U; -#else - uint32_t result; - __ASM volatile ("MRS %0, psplim_ns" : "=r" (result) ); - return result; -#endif -} -#endif - - -/** - \brief Set Process Stack Pointer Limit - Devices without ARMv8-M Main Extensions (i.e. Cortex-M23) lack the non-secure - Stack Pointer Limit register hence the write is silently ignored in non-secure - mode. - - \details Assigns the given value to the Process Stack Pointer Limit (PSPLIM). - \param [in] ProcStackPtrLimit Process Stack Pointer Limit value to set - */ -__STATIC_FORCEINLINE void __set_PSPLIM(uint32_t ProcStackPtrLimit) -{ -#if (!(defined (__ARM_ARCH_8M_MAIN__ ) && (__ARM_ARCH_8M_MAIN__ == 1)) && \ - (!defined (__ARM_FEATURE_CMSE) || (__ARM_FEATURE_CMSE < 3))) - // without main extensions, the non-secure PSPLIM is RAZ/WI - (void)ProcStackPtrLimit; -#else - __ASM volatile ("MSR psplim, %0" : : "r" (ProcStackPtrLimit)); -#endif -} - - -#if (defined (__ARM_FEATURE_CMSE ) && (__ARM_FEATURE_CMSE == 3)) -/** - \brief Set Process Stack Pointer (non-secure) - Devices without ARMv8-M Main Extensions (i.e. Cortex-M23) lack the non-secure - Stack Pointer Limit register hence the write is silently ignored. - - \details Assigns the given value to the non-secure Process Stack Pointer Limit (PSPLIM) when in secure state. - \param [in] ProcStackPtrLimit Process Stack Pointer Limit value to set - */ -__STATIC_FORCEINLINE void __TZ_set_PSPLIM_NS(uint32_t ProcStackPtrLimit) -{ -#if (!(defined (__ARM_ARCH_8M_MAIN__ ) && (__ARM_ARCH_8M_MAIN__ == 1))) - // without main extensions, the non-secure PSPLIM is RAZ/WI - (void)ProcStackPtrLimit; -#else - __ASM volatile ("MSR psplim_ns, %0\n" : : "r" (ProcStackPtrLimit)); -#endif -} -#endif - - -/** - \brief Get Main Stack Pointer Limit - Devices without ARMv8-M Main Extensions (i.e. Cortex-M23) lack the non-secure - Stack Pointer Limit register hence zero is returned always in non-secure - mode. - - \details Returns the current value of the Main Stack Pointer Limit (MSPLIM). - \return MSPLIM Register value - */ -__STATIC_FORCEINLINE uint32_t __get_MSPLIM(void) -{ -#if (!(defined (__ARM_ARCH_8M_MAIN__ ) && (__ARM_ARCH_8M_MAIN__ == 1)) && \ - (!defined (__ARM_FEATURE_CMSE) || (__ARM_FEATURE_CMSE < 3))) - // without main extensions, the non-secure MSPLIM is RAZ/WI - return 0U; -#else - uint32_t result; - __ASM volatile ("MRS %0, msplim" : "=r" (result) ); - return result; -#endif -} - - -#if (defined (__ARM_FEATURE_CMSE ) && (__ARM_FEATURE_CMSE == 3)) -/** - \brief Get Main Stack Pointer Limit (non-secure) - Devices without ARMv8-M Main Extensions (i.e. Cortex-M23) lack the non-secure - Stack Pointer Limit register hence zero is returned always. - - \details Returns the current value of the non-secure Main Stack Pointer Limit(MSPLIM) when in secure state. - \return MSPLIM Register value - */ -__STATIC_FORCEINLINE uint32_t __TZ_get_MSPLIM_NS(void) -{ -#if (!(defined (__ARM_ARCH_8M_MAIN__ ) && (__ARM_ARCH_8M_MAIN__ == 1))) - // without main extensions, the non-secure MSPLIM is RAZ/WI - return 0U; -#else - uint32_t result; - __ASM volatile ("MRS %0, msplim_ns" : "=r" (result) ); - return result; -#endif -} -#endif - - -/** - \brief Set Main Stack Pointer Limit - Devices without ARMv8-M Main Extensions (i.e. Cortex-M23) lack the non-secure - Stack Pointer Limit register hence the write is silently ignored in non-secure - mode. - - \details Assigns the given value to the Main Stack Pointer Limit (MSPLIM). - \param [in] MainStackPtrLimit Main Stack Pointer Limit value to set - */ -__STATIC_FORCEINLINE void __set_MSPLIM(uint32_t MainStackPtrLimit) -{ -#if (!(defined (__ARM_ARCH_8M_MAIN__ ) && (__ARM_ARCH_8M_MAIN__ == 1)) && \ - (!defined (__ARM_FEATURE_CMSE) || (__ARM_FEATURE_CMSE < 3))) - // without main extensions, the non-secure MSPLIM is RAZ/WI - (void)MainStackPtrLimit; -#else - __ASM volatile ("MSR msplim, %0" : : "r" (MainStackPtrLimit)); -#endif -} - - -#if (defined (__ARM_FEATURE_CMSE ) && (__ARM_FEATURE_CMSE == 3)) -/** - \brief Set Main Stack Pointer Limit (non-secure) - Devices without ARMv8-M Main Extensions (i.e. Cortex-M23) lack the non-secure - Stack Pointer Limit register hence the write is silently ignored. - - \details Assigns the given value to the non-secure Main Stack Pointer Limit (MSPLIM) when in secure state. - \param [in] MainStackPtrLimit Main Stack Pointer value to set - */ -__STATIC_FORCEINLINE void __TZ_set_MSPLIM_NS(uint32_t MainStackPtrLimit) -{ -#if (!(defined (__ARM_ARCH_8M_MAIN__ ) && (__ARM_ARCH_8M_MAIN__ == 1))) - // without main extensions, the non-secure MSPLIM is RAZ/WI - (void)MainStackPtrLimit; -#else - __ASM volatile ("MSR msplim_ns, %0" : : "r" (MainStackPtrLimit)); -#endif -} -#endif - -#endif /* ((defined (__ARM_ARCH_8M_MAIN__ ) && (__ARM_ARCH_8M_MAIN__ == 1)) || \ - (defined (__ARM_ARCH_8M_BASE__ ) && (__ARM_ARCH_8M_BASE__ == 1)) ) */ - - -/** - \brief Get FPSCR - \details Returns the current value of the Floating Point Status/Control register. - \return Floating Point Status/Control register value - */ -__STATIC_FORCEINLINE uint32_t __get_FPSCR(void) -{ -#if ((defined (__FPU_PRESENT) && (__FPU_PRESENT == 1U)) && \ - (defined (__FPU_USED ) && (__FPU_USED == 1U)) ) -#if __has_builtin(__builtin_arm_get_fpscr) -// Re-enable using built-in when GCC has been fixed -// || (__GNUC__ > 7) || (__GNUC__ == 7 && __GNUC_MINOR__ >= 2) - /* see https://gcc.gnu.org/ml/gcc-patches/2017-04/msg00443.html */ - return __builtin_arm_get_fpscr(); -#else - uint32_t result; - - __ASM volatile ("VMRS %0, fpscr" : "=r" (result) ); - return(result); -#endif -#else - return(0U); -#endif -} - - -/** - \brief Set FPSCR - \details Assigns the given value to the Floating Point Status/Control register. - \param [in] fpscr Floating Point Status/Control value to set - */ -__STATIC_FORCEINLINE void __set_FPSCR(uint32_t fpscr) -{ -#if ((defined (__FPU_PRESENT) && (__FPU_PRESENT == 1U)) && \ - (defined (__FPU_USED ) && (__FPU_USED == 1U)) ) -#if __has_builtin(__builtin_arm_set_fpscr) -// Re-enable using built-in when GCC has been fixed -// || (__GNUC__ > 7) || (__GNUC__ == 7 && __GNUC_MINOR__ >= 2) - /* see https://gcc.gnu.org/ml/gcc-patches/2017-04/msg00443.html */ - __builtin_arm_set_fpscr(fpscr); -#else - __ASM volatile ("VMSR fpscr, %0" : : "r" (fpscr) : "vfpcc", "memory"); -#endif -#else - (void)fpscr; -#endif -} - - -/*@} end of CMSIS_Core_RegAccFunctions */ - - -/* ########################## Core Instruction Access ######################### */ -/** \defgroup CMSIS_Core_InstructionInterface CMSIS Core Instruction Interface - Access to dedicated instructions - @{ -*/ - -/* Define macros for porting to both thumb1 and thumb2. - * For thumb1, use low register (r0-r7), specified by constraint "l" - * Otherwise, use general registers, specified by constraint "r" */ -#if defined (__thumb__) && !defined (__thumb2__) -#define __CMSIS_GCC_OUT_REG(r) "=l" (r) -#define __CMSIS_GCC_RW_REG(r) "+l" (r) -#define __CMSIS_GCC_USE_REG(r) "l" (r) -#else -#define __CMSIS_GCC_OUT_REG(r) "=r" (r) -#define __CMSIS_GCC_RW_REG(r) "+r" (r) -#define __CMSIS_GCC_USE_REG(r) "r" (r) -#endif - -/** - \brief No Operation - \details No Operation does nothing. This instruction can be used for code alignment purposes. - */ -#define __NOP() __ASM volatile ("nop") - -/** - \brief Wait For Interrupt - \details Wait For Interrupt is a hint instruction that suspends execution until one of a number of events occurs. - */ -#define __WFI() __ASM volatile ("wfi") - - -/** - \brief Wait For Event - \details Wait For Event is a hint instruction that permits the processor to enter - a low-power state until one of a number of events occurs. - */ -#define __WFE() __ASM volatile ("wfe") - - -/** - \brief Send Event - \details Send Event is a hint instruction. It causes an event to be signaled to the CPU. - */ -#define __SEV() __ASM volatile ("sev") - - -/** - \brief Instruction Synchronization Barrier - \details Instruction Synchronization Barrier flushes the pipeline in the processor, - so that all instructions following the ISB are fetched from cache or memory, - after the instruction has been completed. - */ -__STATIC_FORCEINLINE void __ISB(void) -{ - __ASM volatile ("isb 0xF":::"memory"); -} - - -/** - \brief Data Synchronization Barrier - \details Acts as a special kind of Data Memory Barrier. - It completes when all explicit memory accesses before this instruction complete. - */ -__STATIC_FORCEINLINE void __DSB(void) -{ - __ASM volatile ("dsb 0xF":::"memory"); -} - - -/** - \brief Data Memory Barrier - \details Ensures the apparent order of the explicit memory operations before - and after the instruction, without ensuring their completion. - */ -__STATIC_FORCEINLINE void __DMB(void) -{ - __ASM volatile ("dmb 0xF":::"memory"); -} - - -/** - \brief Reverse byte order (32 bit) - \details Reverses the byte order in unsigned integer value. For example, 0x12345678 becomes 0x78563412. - \param [in] value Value to reverse - \return Reversed value - */ -__STATIC_FORCEINLINE uint32_t __REV(uint32_t value) -{ -#if (__GNUC__ > 4) || (__GNUC__ == 4 && __GNUC_MINOR__ >= 5) - return __builtin_bswap32(value); -#else - uint32_t result; - - __ASM volatile ("rev %0, %1" : __CMSIS_GCC_OUT_REG (result) : __CMSIS_GCC_USE_REG (value) ); - return result; -#endif -} - - -/** - \brief Reverse byte order (16 bit) - \details Reverses the byte order within each halfword of a word. For example, 0x12345678 becomes 0x34127856. - \param [in] value Value to reverse - \return Reversed value - */ -__STATIC_FORCEINLINE uint32_t __REV16(uint32_t value) -{ - uint32_t result; - - __ASM volatile ("rev16 %0, %1" : __CMSIS_GCC_OUT_REG (result) : __CMSIS_GCC_USE_REG (value) ); - return result; -} - - -/** - \brief Reverse byte order (16 bit) - \details Reverses the byte order in a 16-bit value and returns the signed 16-bit result. For example, 0x0080 becomes 0x8000. - \param [in] value Value to reverse - \return Reversed value - */ -__STATIC_FORCEINLINE int16_t __REVSH(int16_t value) -{ -#if (__GNUC__ > 4) || (__GNUC__ == 4 && __GNUC_MINOR__ >= 8) - return (int16_t)__builtin_bswap16(value); -#else - int16_t result; - - __ASM volatile ("revsh %0, %1" : __CMSIS_GCC_OUT_REG (result) : __CMSIS_GCC_USE_REG (value) ); - return result; -#endif -} - - -/** - \brief Rotate Right in unsigned value (32 bit) - \details Rotate Right (immediate) provides the value of the contents of a register rotated by a variable number of bits. - \param [in] op1 Value to rotate - \param [in] op2 Number of Bits to rotate - \return Rotated value - */ -__STATIC_FORCEINLINE uint32_t __ROR(uint32_t op1, uint32_t op2) -{ - op2 %= 32U; - if (op2 == 0U) - { - return op1; - } - return (op1 >> op2) | (op1 << (32U - op2)); -} - - -/** - \brief Breakpoint - \details Causes the processor to enter Debug state. - Debug tools can use this to investigate system state when the instruction at a particular address is reached. - \param [in] value is ignored by the processor. - If required, a debugger can use it to store additional information about the breakpoint. - */ -#define __BKPT(value) __ASM volatile ("bkpt "#value) - - -/** - \brief Reverse bit order of value - \details Reverses the bit order of the given value. - \param [in] value Value to reverse - \return Reversed value - */ -__STATIC_FORCEINLINE uint32_t __RBIT(uint32_t value) -{ - uint32_t result; - -#if ((defined (__ARM_ARCH_7M__ ) && (__ARM_ARCH_7M__ == 1)) || \ - (defined (__ARM_ARCH_7EM__ ) && (__ARM_ARCH_7EM__ == 1)) || \ - (defined (__ARM_ARCH_8M_MAIN__ ) && (__ARM_ARCH_8M_MAIN__ == 1)) ) - __ASM volatile ("rbit %0, %1" : "=r" (result) : "r" (value) ); -#else - uint32_t s = (4U /*sizeof(v)*/ * 8U) - 1U; /* extra shift needed at end */ - - result = value; /* r will be reversed bits of v; first get LSB of v */ - for (value >>= 1U; value != 0U; value >>= 1U) - { - result <<= 1U; - result |= value & 1U; - s--; - } - result <<= s; /* shift when v's highest bits are zero */ -#endif - return result; -} - - -/** - \brief Count leading zeros - \details Counts the number of leading zeros of a data value. - \param [in] value Value to count the leading zeros - \return number of leading zeros in value - */ -#define __CLZ (uint8_t)__builtin_clz - - -#if ((defined (__ARM_ARCH_7M__ ) && (__ARM_ARCH_7M__ == 1)) || \ - (defined (__ARM_ARCH_7EM__ ) && (__ARM_ARCH_7EM__ == 1)) || \ - (defined (__ARM_ARCH_8M_MAIN__ ) && (__ARM_ARCH_8M_MAIN__ == 1)) || \ - (defined (__ARM_ARCH_8M_BASE__ ) && (__ARM_ARCH_8M_BASE__ == 1)) ) -/** - \brief LDR Exclusive (8 bit) - \details Executes a exclusive LDR instruction for 8 bit value. - \param [in] ptr Pointer to data - \return value of type uint8_t at (*ptr) - */ -__STATIC_FORCEINLINE uint8_t __LDREXB(volatile uint8_t *addr) -{ - uint32_t result; - -#if (__GNUC__ > 4) || (__GNUC__ == 4 && __GNUC_MINOR__ >= 8) - __ASM volatile ("ldrexb %0, %1" : "=r" (result) : "Q" (*addr) ); -#else - /* Prior to GCC 4.8, "Q" will be expanded to [rx, #0] which is not - accepted by assembler. So has to use following less efficient pattern. - */ - __ASM volatile ("ldrexb %0, [%1]" : "=r" (result) : "r" (addr) : "memory" ); -#endif - return ((uint8_t) result); /* Add explicit type cast here */ -} - - -/** - \brief LDR Exclusive (16 bit) - \details Executes a exclusive LDR instruction for 16 bit values. - \param [in] ptr Pointer to data - \return value of type uint16_t at (*ptr) - */ -__STATIC_FORCEINLINE uint16_t __LDREXH(volatile uint16_t *addr) -{ - uint32_t result; - -#if (__GNUC__ > 4) || (__GNUC__ == 4 && __GNUC_MINOR__ >= 8) - __ASM volatile ("ldrexh %0, %1" : "=r" (result) : "Q" (*addr) ); -#else - /* Prior to GCC 4.8, "Q" will be expanded to [rx, #0] which is not - accepted by assembler. So has to use following less efficient pattern. - */ - __ASM volatile ("ldrexh %0, [%1]" : "=r" (result) : "r" (addr) : "memory" ); -#endif - return ((uint16_t) result); /* Add explicit type cast here */ -} - - -/** - \brief LDR Exclusive (32 bit) - \details Executes a exclusive LDR instruction for 32 bit values. - \param [in] ptr Pointer to data - \return value of type uint32_t at (*ptr) - */ -__STATIC_FORCEINLINE uint32_t __LDREXW(volatile uint32_t *addr) -{ - uint32_t result; - - __ASM volatile ("ldrex %0, %1" : "=r" (result) : "Q" (*addr) ); - return(result); -} - - -/** - \brief STR Exclusive (8 bit) - \details Executes a exclusive STR instruction for 8 bit values. - \param [in] value Value to store - \param [in] ptr Pointer to location - \return 0 Function succeeded - \return 1 Function failed - */ -__STATIC_FORCEINLINE uint32_t __STREXB(uint8_t value, volatile uint8_t *addr) -{ - uint32_t result; - - __ASM volatile ("strexb %0, %2, %1" : "=&r" (result), "=Q" (*addr) : "r" ((uint32_t)value) ); - return(result); -} - - -/** - \brief STR Exclusive (16 bit) - \details Executes a exclusive STR instruction for 16 bit values. - \param [in] value Value to store - \param [in] ptr Pointer to location - \return 0 Function succeeded - \return 1 Function failed - */ -__STATIC_FORCEINLINE uint32_t __STREXH(uint16_t value, volatile uint16_t *addr) -{ - uint32_t result; - - __ASM volatile ("strexh %0, %2, %1" : "=&r" (result), "=Q" (*addr) : "r" ((uint32_t)value) ); - return(result); -} - - -/** - \brief STR Exclusive (32 bit) - \details Executes a exclusive STR instruction for 32 bit values. - \param [in] value Value to store - \param [in] ptr Pointer to location - \return 0 Function succeeded - \return 1 Function failed - */ -__STATIC_FORCEINLINE uint32_t __STREXW(uint32_t value, volatile uint32_t *addr) -{ - uint32_t result; - - __ASM volatile ("strex %0, %2, %1" : "=&r" (result), "=Q" (*addr) : "r" (value) ); - return(result); -} - - -/** - \brief Remove the exclusive lock - \details Removes the exclusive lock which is created by LDREX. - */ -__STATIC_FORCEINLINE void __CLREX(void) -{ - __ASM volatile ("clrex" ::: "memory"); -} - -#endif /* ((defined (__ARM_ARCH_7M__ ) && (__ARM_ARCH_7M__ == 1)) || \ - (defined (__ARM_ARCH_7EM__ ) && (__ARM_ARCH_7EM__ == 1)) || \ - (defined (__ARM_ARCH_8M_MAIN__ ) && (__ARM_ARCH_8M_MAIN__ == 1)) || \ - (defined (__ARM_ARCH_8M_BASE__ ) && (__ARM_ARCH_8M_BASE__ == 1)) ) */ - - -#if ((defined (__ARM_ARCH_7M__ ) && (__ARM_ARCH_7M__ == 1)) || \ - (defined (__ARM_ARCH_7EM__ ) && (__ARM_ARCH_7EM__ == 1)) || \ - (defined (__ARM_ARCH_8M_MAIN__ ) && (__ARM_ARCH_8M_MAIN__ == 1)) ) -/** - \brief Signed Saturate - \details Saturates a signed value. - \param [in] ARG1 Value to be saturated - \param [in] ARG2 Bit position to saturate to (1..32) - \return Saturated value - */ -#define __SSAT(ARG1,ARG2) \ -__extension__ \ -({ \ - int32_t __RES, __ARG1 = (ARG1); \ - __ASM ("ssat %0, %1, %2" : "=r" (__RES) : "I" (ARG2), "r" (__ARG1) ); \ - __RES; \ - }) - - -/** - \brief Unsigned Saturate - \details Saturates an unsigned value. - \param [in] ARG1 Value to be saturated - \param [in] ARG2 Bit position to saturate to (0..31) - \return Saturated value - */ -#define __USAT(ARG1,ARG2) \ - __extension__ \ -({ \ - uint32_t __RES, __ARG1 = (ARG1); \ - __ASM ("usat %0, %1, %2" : "=r" (__RES) : "I" (ARG2), "r" (__ARG1) ); \ - __RES; \ - }) - - -/** - \brief Rotate Right with Extend (32 bit) - \details Moves each bit of a bitstring right by one bit. - The carry input is shifted in at the left end of the bitstring. - \param [in] value Value to rotate - \return Rotated value - */ -__STATIC_FORCEINLINE uint32_t __RRX(uint32_t value) -{ - uint32_t result; - - __ASM volatile ("rrx %0, %1" : __CMSIS_GCC_OUT_REG (result) : __CMSIS_GCC_USE_REG (value) ); - return(result); -} - - -/** - \brief LDRT Unprivileged (8 bit) - \details Executes a Unprivileged LDRT instruction for 8 bit value. - \param [in] ptr Pointer to data - \return value of type uint8_t at (*ptr) - */ -__STATIC_FORCEINLINE uint8_t __LDRBT(volatile uint8_t *ptr) -{ - uint32_t result; - -#if (__GNUC__ > 4) || (__GNUC__ == 4 && __GNUC_MINOR__ >= 8) - __ASM volatile ("ldrbt %0, %1" : "=r" (result) : "Q" (*ptr) ); -#else - /* Prior to GCC 4.8, "Q" will be expanded to [rx, #0] which is not - accepted by assembler. So has to use following less efficient pattern. - */ - __ASM volatile ("ldrbt %0, [%1]" : "=r" (result) : "r" (ptr) : "memory" ); -#endif - return ((uint8_t) result); /* Add explicit type cast here */ -} - - -/** - \brief LDRT Unprivileged (16 bit) - \details Executes a Unprivileged LDRT instruction for 16 bit values. - \param [in] ptr Pointer to data - \return value of type uint16_t at (*ptr) - */ -__STATIC_FORCEINLINE uint16_t __LDRHT(volatile uint16_t *ptr) -{ - uint32_t result; - -#if (__GNUC__ > 4) || (__GNUC__ == 4 && __GNUC_MINOR__ >= 8) - __ASM volatile ("ldrht %0, %1" : "=r" (result) : "Q" (*ptr) ); -#else - /* Prior to GCC 4.8, "Q" will be expanded to [rx, #0] which is not - accepted by assembler. So has to use following less efficient pattern. - */ - __ASM volatile ("ldrht %0, [%1]" : "=r" (result) : "r" (ptr) : "memory" ); -#endif - return ((uint16_t) result); /* Add explicit type cast here */ -} - - -/** - \brief LDRT Unprivileged (32 bit) - \details Executes a Unprivileged LDRT instruction for 32 bit values. - \param [in] ptr Pointer to data - \return value of type uint32_t at (*ptr) - */ -__STATIC_FORCEINLINE uint32_t __LDRT(volatile uint32_t *ptr) -{ - uint32_t result; - - __ASM volatile ("ldrt %0, %1" : "=r" (result) : "Q" (*ptr) ); - return(result); -} - - -/** - \brief STRT Unprivileged (8 bit) - \details Executes a Unprivileged STRT instruction for 8 bit values. - \param [in] value Value to store - \param [in] ptr Pointer to location - */ -__STATIC_FORCEINLINE void __STRBT(uint8_t value, volatile uint8_t *ptr) -{ - __ASM volatile ("strbt %1, %0" : "=Q" (*ptr) : "r" ((uint32_t)value) ); -} - - -/** - \brief STRT Unprivileged (16 bit) - \details Executes a Unprivileged STRT instruction for 16 bit values. - \param [in] value Value to store - \param [in] ptr Pointer to location - */ -__STATIC_FORCEINLINE void __STRHT(uint16_t value, volatile uint16_t *ptr) -{ - __ASM volatile ("strht %1, %0" : "=Q" (*ptr) : "r" ((uint32_t)value) ); -} - - -/** - \brief STRT Unprivileged (32 bit) - \details Executes a Unprivileged STRT instruction for 32 bit values. - \param [in] value Value to store - \param [in] ptr Pointer to location - */ -__STATIC_FORCEINLINE void __STRT(uint32_t value, volatile uint32_t *ptr) -{ - __ASM volatile ("strt %1, %0" : "=Q" (*ptr) : "r" (value) ); -} - -#else /* ((defined (__ARM_ARCH_7M__ ) && (__ARM_ARCH_7M__ == 1)) || \ - (defined (__ARM_ARCH_7EM__ ) && (__ARM_ARCH_7EM__ == 1)) || \ - (defined (__ARM_ARCH_8M_MAIN__ ) && (__ARM_ARCH_8M_MAIN__ == 1)) ) */ - -/** - \brief Signed Saturate - \details Saturates a signed value. - \param [in] value Value to be saturated - \param [in] sat Bit position to saturate to (1..32) - \return Saturated value - */ -__STATIC_FORCEINLINE int32_t __SSAT(int32_t val, uint32_t sat) -{ - if ((sat >= 1U) && (sat <= 32U)) - { - const int32_t max = (int32_t)((1U << (sat - 1U)) - 1U); - const int32_t min = -1 - max ; - if (val > max) - { - return max; - } - else if (val < min) - { - return min; - } - } - return val; -} - -/** - \brief Unsigned Saturate - \details Saturates an unsigned value. - \param [in] value Value to be saturated - \param [in] sat Bit position to saturate to (0..31) - \return Saturated value - */ -__STATIC_FORCEINLINE uint32_t __USAT(int32_t val, uint32_t sat) -{ - if (sat <= 31U) - { - const uint32_t max = ((1U << sat) - 1U); - if (val > (int32_t)max) - { - return max; - } - else if (val < 0) - { - return 0U; - } - } - return (uint32_t)val; -} - -#endif /* ((defined (__ARM_ARCH_7M__ ) && (__ARM_ARCH_7M__ == 1)) || \ - (defined (__ARM_ARCH_7EM__ ) && (__ARM_ARCH_7EM__ == 1)) || \ - (defined (__ARM_ARCH_8M_MAIN__ ) && (__ARM_ARCH_8M_MAIN__ == 1)) ) */ - - -#if ((defined (__ARM_ARCH_8M_MAIN__ ) && (__ARM_ARCH_8M_MAIN__ == 1)) || \ - (defined (__ARM_ARCH_8M_BASE__ ) && (__ARM_ARCH_8M_BASE__ == 1)) ) -/** - \brief Load-Acquire (8 bit) - \details Executes a LDAB instruction for 8 bit value. - \param [in] ptr Pointer to data - \return value of type uint8_t at (*ptr) - */ -__STATIC_FORCEINLINE uint8_t __LDAB(volatile uint8_t *ptr) -{ - uint32_t result; - - __ASM volatile ("ldab %0, %1" : "=r" (result) : "Q" (*ptr) ); - return ((uint8_t) result); -} - - -/** - \brief Load-Acquire (16 bit) - \details Executes a LDAH instruction for 16 bit values. - \param [in] ptr Pointer to data - \return value of type uint16_t at (*ptr) - */ -__STATIC_FORCEINLINE uint16_t __LDAH(volatile uint16_t *ptr) -{ - uint32_t result; - - __ASM volatile ("ldah %0, %1" : "=r" (result) : "Q" (*ptr) ); - return ((uint16_t) result); -} - - -/** - \brief Load-Acquire (32 bit) - \details Executes a LDA instruction for 32 bit values. - \param [in] ptr Pointer to data - \return value of type uint32_t at (*ptr) - */ -__STATIC_FORCEINLINE uint32_t __LDA(volatile uint32_t *ptr) -{ - uint32_t result; - - __ASM volatile ("lda %0, %1" : "=r" (result) : "Q" (*ptr) ); - return(result); -} - - -/** - \brief Store-Release (8 bit) - \details Executes a STLB instruction for 8 bit values. - \param [in] value Value to store - \param [in] ptr Pointer to location - */ -__STATIC_FORCEINLINE void __STLB(uint8_t value, volatile uint8_t *ptr) -{ - __ASM volatile ("stlb %1, %0" : "=Q" (*ptr) : "r" ((uint32_t)value) ); -} - - -/** - \brief Store-Release (16 bit) - \details Executes a STLH instruction for 16 bit values. - \param [in] value Value to store - \param [in] ptr Pointer to location - */ -__STATIC_FORCEINLINE void __STLH(uint16_t value, volatile uint16_t *ptr) -{ - __ASM volatile ("stlh %1, %0" : "=Q" (*ptr) : "r" ((uint32_t)value) ); -} - - -/** - \brief Store-Release (32 bit) - \details Executes a STL instruction for 32 bit values. - \param [in] value Value to store - \param [in] ptr Pointer to location - */ -__STATIC_FORCEINLINE void __STL(uint32_t value, volatile uint32_t *ptr) -{ - __ASM volatile ("stl %1, %0" : "=Q" (*ptr) : "r" ((uint32_t)value) ); -} - - -/** - \brief Load-Acquire Exclusive (8 bit) - \details Executes a LDAB exclusive instruction for 8 bit value. - \param [in] ptr Pointer to data - \return value of type uint8_t at (*ptr) - */ -__STATIC_FORCEINLINE uint8_t __LDAEXB(volatile uint8_t *ptr) -{ - uint32_t result; - - __ASM volatile ("ldaexb %0, %1" : "=r" (result) : "Q" (*ptr) ); - return ((uint8_t) result); -} - - -/** - \brief Load-Acquire Exclusive (16 bit) - \details Executes a LDAH exclusive instruction for 16 bit values. - \param [in] ptr Pointer to data - \return value of type uint16_t at (*ptr) - */ -__STATIC_FORCEINLINE uint16_t __LDAEXH(volatile uint16_t *ptr) -{ - uint32_t result; - - __ASM volatile ("ldaexh %0, %1" : "=r" (result) : "Q" (*ptr) ); - return ((uint16_t) result); -} - - -/** - \brief Load-Acquire Exclusive (32 bit) - \details Executes a LDA exclusive instruction for 32 bit values. - \param [in] ptr Pointer to data - \return value of type uint32_t at (*ptr) - */ -__STATIC_FORCEINLINE uint32_t __LDAEX(volatile uint32_t *ptr) -{ - uint32_t result; - - __ASM volatile ("ldaex %0, %1" : "=r" (result) : "Q" (*ptr) ); - return(result); -} - - -/** - \brief Store-Release Exclusive (8 bit) - \details Executes a STLB exclusive instruction for 8 bit values. - \param [in] value Value to store - \param [in] ptr Pointer to location - \return 0 Function succeeded - \return 1 Function failed - */ -__STATIC_FORCEINLINE uint32_t __STLEXB(uint8_t value, volatile uint8_t *ptr) -{ - uint32_t result; - - __ASM volatile ("stlexb %0, %2, %1" : "=&r" (result), "=Q" (*ptr) : "r" ((uint32_t)value) ); - return(result); -} - - -/** - \brief Store-Release Exclusive (16 bit) - \details Executes a STLH exclusive instruction for 16 bit values. - \param [in] value Value to store - \param [in] ptr Pointer to location - \return 0 Function succeeded - \return 1 Function failed - */ -__STATIC_FORCEINLINE uint32_t __STLEXH(uint16_t value, volatile uint16_t *ptr) -{ - uint32_t result; - - __ASM volatile ("stlexh %0, %2, %1" : "=&r" (result), "=Q" (*ptr) : "r" ((uint32_t)value) ); - return(result); -} - - -/** - \brief Store-Release Exclusive (32 bit) - \details Executes a STL exclusive instruction for 32 bit values. - \param [in] value Value to store - \param [in] ptr Pointer to location - \return 0 Function succeeded - \return 1 Function failed - */ -__STATIC_FORCEINLINE uint32_t __STLEX(uint32_t value, volatile uint32_t *ptr) -{ - uint32_t result; - - __ASM volatile ("stlex %0, %2, %1" : "=&r" (result), "=Q" (*ptr) : "r" ((uint32_t)value) ); - return(result); -} - -#endif /* ((defined (__ARM_ARCH_8M_MAIN__ ) && (__ARM_ARCH_8M_MAIN__ == 1)) || \ - (defined (__ARM_ARCH_8M_BASE__ ) && (__ARM_ARCH_8M_BASE__ == 1)) ) */ - -/*@}*/ /* end of group CMSIS_Core_InstructionInterface */ - - -/* ################### Compiler specific Intrinsics ########################### */ -/** \defgroup CMSIS_SIMD_intrinsics CMSIS SIMD Intrinsics - Access to dedicated SIMD instructions - @{ -*/ - -#if (defined (__ARM_FEATURE_DSP) && (__ARM_FEATURE_DSP == 1)) - -__STATIC_FORCEINLINE uint32_t __SADD8(uint32_t op1, uint32_t op2) -{ - uint32_t result; - - __ASM volatile ("sadd8 %0, %1, %2" : "=r" (result) : "r" (op1), "r" (op2) ); - return(result); -} - -__STATIC_FORCEINLINE uint32_t __QADD8(uint32_t op1, uint32_t op2) -{ - uint32_t result; - - __ASM volatile ("qadd8 %0, %1, %2" : "=r" (result) : "r" (op1), "r" (op2) ); - return(result); -} - -__STATIC_FORCEINLINE uint32_t __SHADD8(uint32_t op1, uint32_t op2) -{ - uint32_t result; - - __ASM volatile ("shadd8 %0, %1, %2" : "=r" (result) : "r" (op1), "r" (op2) ); - return(result); -} - -__STATIC_FORCEINLINE uint32_t __UADD8(uint32_t op1, uint32_t op2) -{ - uint32_t result; - - __ASM volatile ("uadd8 %0, %1, %2" : "=r" (result) : "r" (op1), "r" (op2) ); - return(result); -} - -__STATIC_FORCEINLINE uint32_t __UQADD8(uint32_t op1, uint32_t op2) -{ - uint32_t result; - - __ASM volatile ("uqadd8 %0, %1, %2" : "=r" (result) : "r" (op1), "r" (op2) ); - return(result); -} - -__STATIC_FORCEINLINE uint32_t __UHADD8(uint32_t op1, uint32_t op2) -{ - uint32_t result; - - __ASM volatile ("uhadd8 %0, %1, %2" : "=r" (result) : "r" (op1), "r" (op2) ); - return(result); -} - - -__STATIC_FORCEINLINE uint32_t __SSUB8(uint32_t op1, uint32_t op2) -{ - uint32_t result; - - __ASM volatile ("ssub8 %0, %1, %2" : "=r" (result) : "r" (op1), "r" (op2) ); - return(result); -} - -__STATIC_FORCEINLINE uint32_t __QSUB8(uint32_t op1, uint32_t op2) -{ - uint32_t result; - - __ASM volatile ("qsub8 %0, %1, %2" : "=r" (result) : "r" (op1), "r" (op2) ); - return(result); -} - -__STATIC_FORCEINLINE uint32_t __SHSUB8(uint32_t op1, uint32_t op2) -{ - uint32_t result; - - __ASM volatile ("shsub8 %0, %1, %2" : "=r" (result) : "r" (op1), "r" (op2) ); - return(result); -} - -__STATIC_FORCEINLINE uint32_t __USUB8(uint32_t op1, uint32_t op2) -{ - uint32_t result; - - __ASM volatile ("usub8 %0, %1, %2" : "=r" (result) : "r" (op1), "r" (op2) ); - return(result); -} - -__STATIC_FORCEINLINE uint32_t __UQSUB8(uint32_t op1, uint32_t op2) -{ - uint32_t result; - - __ASM volatile ("uqsub8 %0, %1, %2" : "=r" (result) : "r" (op1), "r" (op2) ); - return(result); -} - -__STATIC_FORCEINLINE uint32_t __UHSUB8(uint32_t op1, uint32_t op2) -{ - uint32_t result; - - __ASM volatile ("uhsub8 %0, %1, %2" : "=r" (result) : "r" (op1), "r" (op2) ); - return(result); -} - - -__STATIC_FORCEINLINE uint32_t __SADD16(uint32_t op1, uint32_t op2) -{ - uint32_t result; - - __ASM volatile ("sadd16 %0, %1, %2" : "=r" (result) : "r" (op1), "r" (op2) ); - return(result); -} - -__STATIC_FORCEINLINE uint32_t __QADD16(uint32_t op1, uint32_t op2) -{ - uint32_t result; - - __ASM volatile ("qadd16 %0, %1, %2" : "=r" (result) : "r" (op1), "r" (op2) ); - return(result); -} - -__STATIC_FORCEINLINE uint32_t __SHADD16(uint32_t op1, uint32_t op2) -{ - uint32_t result; - - __ASM volatile ("shadd16 %0, %1, %2" : "=r" (result) : "r" (op1), "r" (op2) ); - return(result); -} - -__STATIC_FORCEINLINE uint32_t __UADD16(uint32_t op1, uint32_t op2) -{ - uint32_t result; - - __ASM volatile ("uadd16 %0, %1, %2" : "=r" (result) : "r" (op1), "r" (op2) ); - return(result); -} - -__STATIC_FORCEINLINE uint32_t __UQADD16(uint32_t op1, uint32_t op2) -{ - uint32_t result; - - __ASM volatile ("uqadd16 %0, %1, %2" : "=r" (result) : "r" (op1), "r" (op2) ); - return(result); -} - -__STATIC_FORCEINLINE uint32_t __UHADD16(uint32_t op1, uint32_t op2) -{ - uint32_t result; - - __ASM volatile ("uhadd16 %0, %1, %2" : "=r" (result) : "r" (op1), "r" (op2) ); - return(result); -} - -__STATIC_FORCEINLINE uint32_t __SSUB16(uint32_t op1, uint32_t op2) -{ - uint32_t result; - - __ASM volatile ("ssub16 %0, %1, %2" : "=r" (result) : "r" (op1), "r" (op2) ); - return(result); -} - -__STATIC_FORCEINLINE uint32_t __QSUB16(uint32_t op1, uint32_t op2) -{ - uint32_t result; - - __ASM volatile ("qsub16 %0, %1, %2" : "=r" (result) : "r" (op1), "r" (op2) ); - return(result); -} - -__STATIC_FORCEINLINE uint32_t __SHSUB16(uint32_t op1, uint32_t op2) -{ - uint32_t result; - - __ASM volatile ("shsub16 %0, %1, %2" : "=r" (result) : "r" (op1), "r" (op2) ); - return(result); -} - -__STATIC_FORCEINLINE uint32_t __USUB16(uint32_t op1, uint32_t op2) -{ - uint32_t result; - - __ASM volatile ("usub16 %0, %1, %2" : "=r" (result) : "r" (op1), "r" (op2) ); - return(result); -} - -__STATIC_FORCEINLINE uint32_t __UQSUB16(uint32_t op1, uint32_t op2) -{ - uint32_t result; - - __ASM volatile ("uqsub16 %0, %1, %2" : "=r" (result) : "r" (op1), "r" (op2) ); - return(result); -} - -__STATIC_FORCEINLINE uint32_t __UHSUB16(uint32_t op1, uint32_t op2) -{ - uint32_t result; - - __ASM volatile ("uhsub16 %0, %1, %2" : "=r" (result) : "r" (op1), "r" (op2) ); - return(result); -} - -__STATIC_FORCEINLINE uint32_t __SASX(uint32_t op1, uint32_t op2) -{ - uint32_t result; - - __ASM volatile ("sasx %0, %1, %2" : "=r" (result) : "r" (op1), "r" (op2) ); - return(result); -} - -__STATIC_FORCEINLINE uint32_t __QASX(uint32_t op1, uint32_t op2) -{ - uint32_t result; - - __ASM volatile ("qasx %0, %1, %2" : "=r" (result) : "r" (op1), "r" (op2) ); - return(result); -} - -__STATIC_FORCEINLINE uint32_t __SHASX(uint32_t op1, uint32_t op2) -{ - uint32_t result; - - __ASM volatile ("shasx %0, %1, %2" : "=r" (result) : "r" (op1), "r" (op2) ); - return(result); -} - -__STATIC_FORCEINLINE uint32_t __UASX(uint32_t op1, uint32_t op2) -{ - uint32_t result; - - __ASM volatile ("uasx %0, %1, %2" : "=r" (result) : "r" (op1), "r" (op2) ); - return(result); -} - -__STATIC_FORCEINLINE uint32_t __UQASX(uint32_t op1, uint32_t op2) -{ - uint32_t result; - - __ASM volatile ("uqasx %0, %1, %2" : "=r" (result) : "r" (op1), "r" (op2) ); - return(result); -} - -__STATIC_FORCEINLINE uint32_t __UHASX(uint32_t op1, uint32_t op2) -{ - uint32_t result; - - __ASM volatile ("uhasx %0, %1, %2" : "=r" (result) : "r" (op1), "r" (op2) ); - return(result); -} - -__STATIC_FORCEINLINE uint32_t __SSAX(uint32_t op1, uint32_t op2) -{ - uint32_t result; - - __ASM volatile ("ssax %0, %1, %2" : "=r" (result) : "r" (op1), "r" (op2) ); - return(result); -} - -__STATIC_FORCEINLINE uint32_t __QSAX(uint32_t op1, uint32_t op2) -{ - uint32_t result; - - __ASM volatile ("qsax %0, %1, %2" : "=r" (result) : "r" (op1), "r" (op2) ); - return(result); -} - -__STATIC_FORCEINLINE uint32_t __SHSAX(uint32_t op1, uint32_t op2) -{ - uint32_t result; - - __ASM volatile ("shsax %0, %1, %2" : "=r" (result) : "r" (op1), "r" (op2) ); - return(result); -} - -__STATIC_FORCEINLINE uint32_t __USAX(uint32_t op1, uint32_t op2) -{ - uint32_t result; - - __ASM volatile ("usax %0, %1, %2" : "=r" (result) : "r" (op1), "r" (op2) ); - return(result); -} - -__STATIC_FORCEINLINE uint32_t __UQSAX(uint32_t op1, uint32_t op2) -{ - uint32_t result; - - __ASM volatile ("uqsax %0, %1, %2" : "=r" (result) : "r" (op1), "r" (op2) ); - return(result); -} - -__STATIC_FORCEINLINE uint32_t __UHSAX(uint32_t op1, uint32_t op2) -{ - uint32_t result; - - __ASM volatile ("uhsax %0, %1, %2" : "=r" (result) : "r" (op1), "r" (op2) ); - return(result); -} - -__STATIC_FORCEINLINE uint32_t __USAD8(uint32_t op1, uint32_t op2) -{ - uint32_t result; - - __ASM volatile ("usad8 %0, %1, %2" : "=r" (result) : "r" (op1), "r" (op2) ); - return(result); -} - -__STATIC_FORCEINLINE uint32_t __USADA8(uint32_t op1, uint32_t op2, uint32_t op3) -{ - uint32_t result; - - __ASM volatile ("usada8 %0, %1, %2, %3" : "=r" (result) : "r" (op1), "r" (op2), "r" (op3) ); - return(result); -} - -#define __SSAT16(ARG1,ARG2) \ -({ \ - int32_t __RES, __ARG1 = (ARG1); \ - __ASM ("ssat16 %0, %1, %2" : "=r" (__RES) : "I" (ARG2), "r" (__ARG1) ); \ - __RES; \ - }) - -#define __USAT16(ARG1,ARG2) \ -({ \ - uint32_t __RES, __ARG1 = (ARG1); \ - __ASM ("usat16 %0, %1, %2" : "=r" (__RES) : "I" (ARG2), "r" (__ARG1) ); \ - __RES; \ - }) - -__STATIC_FORCEINLINE uint32_t __UXTB16(uint32_t op1) -{ - uint32_t result; - - __ASM volatile ("uxtb16 %0, %1" : "=r" (result) : "r" (op1)); - return(result); -} - -__STATIC_FORCEINLINE uint32_t __UXTAB16(uint32_t op1, uint32_t op2) -{ - uint32_t result; - - __ASM volatile ("uxtab16 %0, %1, %2" : "=r" (result) : "r" (op1), "r" (op2) ); - return(result); -} - -__STATIC_FORCEINLINE uint32_t __SXTB16(uint32_t op1) -{ - uint32_t result; - - __ASM volatile ("sxtb16 %0, %1" : "=r" (result) : "r" (op1)); - return(result); -} - -__STATIC_FORCEINLINE uint32_t __SXTAB16(uint32_t op1, uint32_t op2) -{ - uint32_t result; - - __ASM volatile ("sxtab16 %0, %1, %2" : "=r" (result) : "r" (op1), "r" (op2) ); - return(result); -} - -__STATIC_FORCEINLINE uint32_t __SMUAD (uint32_t op1, uint32_t op2) -{ - uint32_t result; - - __ASM volatile ("smuad %0, %1, %2" : "=r" (result) : "r" (op1), "r" (op2) ); - return(result); -} - -__STATIC_FORCEINLINE uint32_t __SMUADX (uint32_t op1, uint32_t op2) -{ - uint32_t result; - - __ASM volatile ("smuadx %0, %1, %2" : "=r" (result) : "r" (op1), "r" (op2) ); - return(result); -} - -__STATIC_FORCEINLINE uint32_t __SMLAD (uint32_t op1, uint32_t op2, uint32_t op3) -{ - uint32_t result; - - __ASM volatile ("smlad %0, %1, %2, %3" : "=r" (result) : "r" (op1), "r" (op2), "r" (op3) ); - return(result); -} - -__STATIC_FORCEINLINE uint32_t __SMLADX (uint32_t op1, uint32_t op2, uint32_t op3) -{ - uint32_t result; - - __ASM volatile ("smladx %0, %1, %2, %3" : "=r" (result) : "r" (op1), "r" (op2), "r" (op3) ); - return(result); -} - -__STATIC_FORCEINLINE uint64_t __SMLALD (uint32_t op1, uint32_t op2, uint64_t acc) -{ - union llreg_u{ - uint32_t w32[2]; - uint64_t w64; - } llr; - llr.w64 = acc; - -#ifndef __ARMEB__ /* Little endian */ - __ASM volatile ("smlald %0, %1, %2, %3" : "=r" (llr.w32[0]), "=r" (llr.w32[1]): "r" (op1), "r" (op2) , "0" (llr.w32[0]), "1" (llr.w32[1]) ); -#else /* Big endian */ - __ASM volatile ("smlald %0, %1, %2, %3" : "=r" (llr.w32[1]), "=r" (llr.w32[0]): "r" (op1), "r" (op2) , "0" (llr.w32[1]), "1" (llr.w32[0]) ); -#endif - - return(llr.w64); -} - -__STATIC_FORCEINLINE uint64_t __SMLALDX (uint32_t op1, uint32_t op2, uint64_t acc) -{ - union llreg_u{ - uint32_t w32[2]; - uint64_t w64; - } llr; - llr.w64 = acc; - -#ifndef __ARMEB__ /* Little endian */ - __ASM volatile ("smlaldx %0, %1, %2, %3" : "=r" (llr.w32[0]), "=r" (llr.w32[1]): "r" (op1), "r" (op2) , "0" (llr.w32[0]), "1" (llr.w32[1]) ); -#else /* Big endian */ - __ASM volatile ("smlaldx %0, %1, %2, %3" : "=r" (llr.w32[1]), "=r" (llr.w32[0]): "r" (op1), "r" (op2) , "0" (llr.w32[1]), "1" (llr.w32[0]) ); -#endif - - return(llr.w64); -} - -__STATIC_FORCEINLINE uint32_t __SMUSD (uint32_t op1, uint32_t op2) -{ - uint32_t result; - - __ASM volatile ("smusd %0, %1, %2" : "=r" (result) : "r" (op1), "r" (op2) ); - return(result); -} - -__STATIC_FORCEINLINE uint32_t __SMUSDX (uint32_t op1, uint32_t op2) -{ - uint32_t result; - - __ASM volatile ("smusdx %0, %1, %2" : "=r" (result) : "r" (op1), "r" (op2) ); - return(result); -} - -__STATIC_FORCEINLINE uint32_t __SMLSD (uint32_t op1, uint32_t op2, uint32_t op3) -{ - uint32_t result; - - __ASM volatile ("smlsd %0, %1, %2, %3" : "=r" (result) : "r" (op1), "r" (op2), "r" (op3) ); - return(result); -} - -__STATIC_FORCEINLINE uint32_t __SMLSDX (uint32_t op1, uint32_t op2, uint32_t op3) -{ - uint32_t result; - - __ASM volatile ("smlsdx %0, %1, %2, %3" : "=r" (result) : "r" (op1), "r" (op2), "r" (op3) ); - return(result); -} - -__STATIC_FORCEINLINE uint64_t __SMLSLD (uint32_t op1, uint32_t op2, uint64_t acc) -{ - union llreg_u{ - uint32_t w32[2]; - uint64_t w64; - } llr; - llr.w64 = acc; - -#ifndef __ARMEB__ /* Little endian */ - __ASM volatile ("smlsld %0, %1, %2, %3" : "=r" (llr.w32[0]), "=r" (llr.w32[1]): "r" (op1), "r" (op2) , "0" (llr.w32[0]), "1" (llr.w32[1]) ); -#else /* Big endian */ - __ASM volatile ("smlsld %0, %1, %2, %3" : "=r" (llr.w32[1]), "=r" (llr.w32[0]): "r" (op1), "r" (op2) , "0" (llr.w32[1]), "1" (llr.w32[0]) ); -#endif - - return(llr.w64); -} - -__STATIC_FORCEINLINE uint64_t __SMLSLDX (uint32_t op1, uint32_t op2, uint64_t acc) -{ - union llreg_u{ - uint32_t w32[2]; - uint64_t w64; - } llr; - llr.w64 = acc; - -#ifndef __ARMEB__ /* Little endian */ - __ASM volatile ("smlsldx %0, %1, %2, %3" : "=r" (llr.w32[0]), "=r" (llr.w32[1]): "r" (op1), "r" (op2) , "0" (llr.w32[0]), "1" (llr.w32[1]) ); -#else /* Big endian */ - __ASM volatile ("smlsldx %0, %1, %2, %3" : "=r" (llr.w32[1]), "=r" (llr.w32[0]): "r" (op1), "r" (op2) , "0" (llr.w32[1]), "1" (llr.w32[0]) ); -#endif - - return(llr.w64); -} - -__STATIC_FORCEINLINE uint32_t __SEL (uint32_t op1, uint32_t op2) -{ - uint32_t result; - - __ASM volatile ("sel %0, %1, %2" : "=r" (result) : "r" (op1), "r" (op2) ); - return(result); -} - -__STATIC_FORCEINLINE int32_t __QADD( int32_t op1, int32_t op2) -{ - int32_t result; - - __ASM volatile ("qadd %0, %1, %2" : "=r" (result) : "r" (op1), "r" (op2) ); - return(result); -} - -__STATIC_FORCEINLINE int32_t __QSUB( int32_t op1, int32_t op2) -{ - int32_t result; - - __ASM volatile ("qsub %0, %1, %2" : "=r" (result) : "r" (op1), "r" (op2) ); - return(result); -} - -#if 0 -#define __PKHBT(ARG1,ARG2,ARG3) \ -({ \ - uint32_t __RES, __ARG1 = (ARG1), __ARG2 = (ARG2); \ - __ASM ("pkhbt %0, %1, %2, lsl %3" : "=r" (__RES) : "r" (__ARG1), "r" (__ARG2), "I" (ARG3) ); \ - __RES; \ - }) - -#define __PKHTB(ARG1,ARG2,ARG3) \ -({ \ - uint32_t __RES, __ARG1 = (ARG1), __ARG2 = (ARG2); \ - if (ARG3 == 0) \ - __ASM ("pkhtb %0, %1, %2" : "=r" (__RES) : "r" (__ARG1), "r" (__ARG2) ); \ - else \ - __ASM ("pkhtb %0, %1, %2, asr %3" : "=r" (__RES) : "r" (__ARG1), "r" (__ARG2), "I" (ARG3) ); \ - __RES; \ - }) -#endif - -#define __PKHBT(ARG1,ARG2,ARG3) ( ((((uint32_t)(ARG1)) ) & 0x0000FFFFUL) | \ - ((((uint32_t)(ARG2)) << (ARG3)) & 0xFFFF0000UL) ) - -#define __PKHTB(ARG1,ARG2,ARG3) ( ((((uint32_t)(ARG1)) ) & 0xFFFF0000UL) | \ - ((((uint32_t)(ARG2)) >> (ARG3)) & 0x0000FFFFUL) ) - -__STATIC_FORCEINLINE int32_t __SMMLA (int32_t op1, int32_t op2, int32_t op3) -{ - int32_t result; - - __ASM volatile ("smmla %0, %1, %2, %3" : "=r" (result): "r" (op1), "r" (op2), "r" (op3) ); - return(result); -} - -#endif /* (__ARM_FEATURE_DSP == 1) */ -/*@} end of group CMSIS_SIMD_intrinsics */ - - -#pragma GCC diagnostic pop - -#endif /* __CMSIS_GCC_H */ diff --git a/test_dma/Drivers/CMSIS/Include/cmsis_iccarm.h b/test_dma/Drivers/CMSIS/Include/cmsis_iccarm.h deleted file mode 100644 index 3c90a2c..0000000 --- a/test_dma/Drivers/CMSIS/Include/cmsis_iccarm.h +++ /dev/null @@ -1,935 +0,0 @@ -/**************************************************************************//** - * @file cmsis_iccarm.h - * @brief CMSIS compiler ICCARM (IAR Compiler for Arm) header file - * @version V5.0.7 - * @date 19. June 2018 - ******************************************************************************/ - -//------------------------------------------------------------------------------ -// -// Copyright (c) 2017-2018 IAR Systems -// -// Licensed under the Apache License, Version 2.0 (the "License") -// you may not use this file except in compliance with the License. -// You may obtain a copy of the License at -// http://www.apache.org/licenses/LICENSE-2.0 -// -// Unless required by applicable law or agreed to in writing, software -// distributed under the License is distributed on an "AS IS" BASIS, -// WITHOUT WARRANTIES OR CONDITIONS OF ANY KIND, either express or implied. -// See the License for the specific language governing permissions and -// limitations under the License. -// -//------------------------------------------------------------------------------ - - -#ifndef __CMSIS_ICCARM_H__ -#define __CMSIS_ICCARM_H__ - -#ifndef __ICCARM__ - #error This file should only be compiled by ICCARM -#endif - -#pragma system_include - -#define __IAR_FT _Pragma("inline=forced") __intrinsic - -#if (__VER__ >= 8000000) - #define __ICCARM_V8 1 -#else - #define __ICCARM_V8 0 -#endif - -#ifndef __ALIGNED - #if __ICCARM_V8 - #define __ALIGNED(x) __attribute__((aligned(x))) - #elif (__VER__ >= 7080000) - /* Needs IAR language extensions */ - #define __ALIGNED(x) __attribute__((aligned(x))) - #else - #warning No compiler specific solution for __ALIGNED.__ALIGNED is ignored. - #define __ALIGNED(x) - #endif -#endif - - -/* Define compiler macros for CPU architecture, used in CMSIS 5. - */ -#if __ARM_ARCH_6M__ || __ARM_ARCH_7M__ || __ARM_ARCH_7EM__ || __ARM_ARCH_8M_BASE__ || __ARM_ARCH_8M_MAIN__ -/* Macros already defined */ -#else - #if defined(__ARM8M_MAINLINE__) || defined(__ARM8EM_MAINLINE__) - #define __ARM_ARCH_8M_MAIN__ 1 - #elif defined(__ARM8M_BASELINE__) - #define __ARM_ARCH_8M_BASE__ 1 - #elif defined(__ARM_ARCH_PROFILE) && __ARM_ARCH_PROFILE == 'M' - #if __ARM_ARCH == 6 - #define __ARM_ARCH_6M__ 1 - #elif __ARM_ARCH == 7 - #if __ARM_FEATURE_DSP - #define __ARM_ARCH_7EM__ 1 - #else - #define __ARM_ARCH_7M__ 1 - #endif - #endif /* __ARM_ARCH */ - #endif /* __ARM_ARCH_PROFILE == 'M' */ -#endif - -/* Alternativ core deduction for older ICCARM's */ -#if !defined(__ARM_ARCH_6M__) && !defined(__ARM_ARCH_7M__) && !defined(__ARM_ARCH_7EM__) && \ - !defined(__ARM_ARCH_8M_BASE__) && !defined(__ARM_ARCH_8M_MAIN__) - #if defined(__ARM6M__) && (__CORE__ == __ARM6M__) - #define __ARM_ARCH_6M__ 1 - #elif defined(__ARM7M__) && (__CORE__ == __ARM7M__) - #define __ARM_ARCH_7M__ 1 - #elif defined(__ARM7EM__) && (__CORE__ == __ARM7EM__) - #define __ARM_ARCH_7EM__ 1 - #elif defined(__ARM8M_BASELINE__) && (__CORE == __ARM8M_BASELINE__) - #define __ARM_ARCH_8M_BASE__ 1 - #elif defined(__ARM8M_MAINLINE__) && (__CORE == __ARM8M_MAINLINE__) - #define __ARM_ARCH_8M_MAIN__ 1 - #elif defined(__ARM8EM_MAINLINE__) && (__CORE == __ARM8EM_MAINLINE__) - #define __ARM_ARCH_8M_MAIN__ 1 - #else - #error "Unknown target." - #endif -#endif - - - -#if defined(__ARM_ARCH_6M__) && __ARM_ARCH_6M__==1 - #define __IAR_M0_FAMILY 1 -#elif defined(__ARM_ARCH_8M_BASE__) && __ARM_ARCH_8M_BASE__==1 - #define __IAR_M0_FAMILY 1 -#else - #define __IAR_M0_FAMILY 0 -#endif - - -#ifndef __ASM - #define __ASM __asm -#endif - -#ifndef __INLINE - #define __INLINE inline -#endif - -#ifndef __NO_RETURN - #if __ICCARM_V8 - #define __NO_RETURN __attribute__((__noreturn__)) - #else - #define __NO_RETURN _Pragma("object_attribute=__noreturn") - #endif -#endif - -#ifndef __PACKED - #if __ICCARM_V8 - #define __PACKED __attribute__((packed, aligned(1))) - #else - /* Needs IAR language extensions */ - #define __PACKED __packed - #endif -#endif - -#ifndef __PACKED_STRUCT - #if __ICCARM_V8 - #define __PACKED_STRUCT struct __attribute__((packed, aligned(1))) - #else - /* Needs IAR language extensions */ - #define __PACKED_STRUCT __packed struct - #endif -#endif - -#ifndef __PACKED_UNION - #if __ICCARM_V8 - #define __PACKED_UNION union __attribute__((packed, aligned(1))) - #else - /* Needs IAR language extensions */ - #define __PACKED_UNION __packed union - #endif -#endif - -#ifndef __RESTRICT - #define __RESTRICT __restrict -#endif - -#ifndef __STATIC_INLINE - #define __STATIC_INLINE static inline -#endif - -#ifndef __FORCEINLINE - #define __FORCEINLINE _Pragma("inline=forced") -#endif - -#ifndef __STATIC_FORCEINLINE - #define __STATIC_FORCEINLINE __FORCEINLINE __STATIC_INLINE -#endif - -#ifndef __UNALIGNED_UINT16_READ -#pragma language=save -#pragma language=extended -__IAR_FT uint16_t __iar_uint16_read(void const *ptr) -{ - return *(__packed uint16_t*)(ptr); -} -#pragma language=restore -#define __UNALIGNED_UINT16_READ(PTR) __iar_uint16_read(PTR) -#endif - - -#ifndef __UNALIGNED_UINT16_WRITE -#pragma language=save -#pragma language=extended -__IAR_FT void __iar_uint16_write(void const *ptr, uint16_t val) -{ - *(__packed uint16_t*)(ptr) = val;; -} -#pragma language=restore -#define __UNALIGNED_UINT16_WRITE(PTR,VAL) __iar_uint16_write(PTR,VAL) -#endif - -#ifndef __UNALIGNED_UINT32_READ -#pragma language=save -#pragma language=extended -__IAR_FT uint32_t __iar_uint32_read(void const *ptr) -{ - return *(__packed uint32_t*)(ptr); -} -#pragma language=restore -#define __UNALIGNED_UINT32_READ(PTR) __iar_uint32_read(PTR) -#endif - -#ifndef __UNALIGNED_UINT32_WRITE -#pragma language=save -#pragma language=extended -__IAR_FT void __iar_uint32_write(void const *ptr, uint32_t val) -{ - *(__packed uint32_t*)(ptr) = val;; -} -#pragma language=restore -#define __UNALIGNED_UINT32_WRITE(PTR,VAL) __iar_uint32_write(PTR,VAL) -#endif - -#ifndef __UNALIGNED_UINT32 /* deprecated */ -#pragma language=save -#pragma language=extended -__packed struct __iar_u32 { uint32_t v; }; -#pragma language=restore -#define __UNALIGNED_UINT32(PTR) (((struct __iar_u32 *)(PTR))->v) -#endif - -#ifndef __USED - #if __ICCARM_V8 - #define __USED __attribute__((used)) - #else - #define __USED _Pragma("__root") - #endif -#endif - -#ifndef __WEAK - #if __ICCARM_V8 - #define __WEAK __attribute__((weak)) - #else - #define __WEAK _Pragma("__weak") - #endif -#endif - - -#ifndef __ICCARM_INTRINSICS_VERSION__ - #define __ICCARM_INTRINSICS_VERSION__ 0 -#endif - -#if __ICCARM_INTRINSICS_VERSION__ == 2 - - #if defined(__CLZ) - #undef __CLZ - #endif - #if defined(__REVSH) - #undef __REVSH - #endif - #if defined(__RBIT) - #undef __RBIT - #endif - #if defined(__SSAT) - #undef __SSAT - #endif - #if defined(__USAT) - #undef __USAT - #endif - - #include "iccarm_builtin.h" - - #define __disable_fault_irq __iar_builtin_disable_fiq - #define __disable_irq __iar_builtin_disable_interrupt - #define __enable_fault_irq __iar_builtin_enable_fiq - #define __enable_irq __iar_builtin_enable_interrupt - #define __arm_rsr __iar_builtin_rsr - #define __arm_wsr __iar_builtin_wsr - - - #define __get_APSR() (__arm_rsr("APSR")) - #define __get_BASEPRI() (__arm_rsr("BASEPRI")) - #define __get_CONTROL() (__arm_rsr("CONTROL")) - #define __get_FAULTMASK() (__arm_rsr("FAULTMASK")) - - #if ((defined (__FPU_PRESENT) && (__FPU_PRESENT == 1U)) && \ - (defined (__FPU_USED ) && (__FPU_USED == 1U)) ) - #define __get_FPSCR() (__arm_rsr("FPSCR")) - #define __set_FPSCR(VALUE) (__arm_wsr("FPSCR", (VALUE))) - #else - #define __get_FPSCR() ( 0 ) - #define __set_FPSCR(VALUE) ((void)VALUE) - #endif - - #define __get_IPSR() (__arm_rsr("IPSR")) - #define __get_MSP() (__arm_rsr("MSP")) - #if (!(defined (__ARM_ARCH_8M_MAIN__ ) && (__ARM_ARCH_8M_MAIN__ == 1)) && \ - (!defined (__ARM_FEATURE_CMSE) || (__ARM_FEATURE_CMSE < 3))) - // without main extensions, the non-secure MSPLIM is RAZ/WI - #define __get_MSPLIM() (0U) - #else - #define __get_MSPLIM() (__arm_rsr("MSPLIM")) - #endif - #define __get_PRIMASK() (__arm_rsr("PRIMASK")) - #define __get_PSP() (__arm_rsr("PSP")) - - #if (!(defined (__ARM_ARCH_8M_MAIN__ ) && (__ARM_ARCH_8M_MAIN__ == 1)) && \ - (!defined (__ARM_FEATURE_CMSE) || (__ARM_FEATURE_CMSE < 3))) - // without main extensions, the non-secure PSPLIM is RAZ/WI - #define __get_PSPLIM() (0U) - #else - #define __get_PSPLIM() (__arm_rsr("PSPLIM")) - #endif - - #define __get_xPSR() (__arm_rsr("xPSR")) - - #define __set_BASEPRI(VALUE) (__arm_wsr("BASEPRI", (VALUE))) - #define __set_BASEPRI_MAX(VALUE) (__arm_wsr("BASEPRI_MAX", (VALUE))) - #define __set_CONTROL(VALUE) (__arm_wsr("CONTROL", (VALUE))) - #define __set_FAULTMASK(VALUE) (__arm_wsr("FAULTMASK", (VALUE))) - #define __set_MSP(VALUE) (__arm_wsr("MSP", (VALUE))) - - #if (!(defined (__ARM_ARCH_8M_MAIN__ ) && (__ARM_ARCH_8M_MAIN__ == 1)) && \ - (!defined (__ARM_FEATURE_CMSE) || (__ARM_FEATURE_CMSE < 3))) - // without main extensions, the non-secure MSPLIM is RAZ/WI - #define __set_MSPLIM(VALUE) ((void)(VALUE)) - #else - #define __set_MSPLIM(VALUE) (__arm_wsr("MSPLIM", (VALUE))) - #endif - #define __set_PRIMASK(VALUE) (__arm_wsr("PRIMASK", (VALUE))) - #define __set_PSP(VALUE) (__arm_wsr("PSP", (VALUE))) - #if (!(defined (__ARM_ARCH_8M_MAIN__ ) && (__ARM_ARCH_8M_MAIN__ == 1)) && \ - (!defined (__ARM_FEATURE_CMSE) || (__ARM_FEATURE_CMSE < 3))) - // without main extensions, the non-secure PSPLIM is RAZ/WI - #define __set_PSPLIM(VALUE) ((void)(VALUE)) - #else - #define __set_PSPLIM(VALUE) (__arm_wsr("PSPLIM", (VALUE))) - #endif - - #define __TZ_get_CONTROL_NS() (__arm_rsr("CONTROL_NS")) - #define __TZ_set_CONTROL_NS(VALUE) (__arm_wsr("CONTROL_NS", (VALUE))) - #define __TZ_get_PSP_NS() (__arm_rsr("PSP_NS")) - #define __TZ_set_PSP_NS(VALUE) (__arm_wsr("PSP_NS", (VALUE))) - #define __TZ_get_MSP_NS() (__arm_rsr("MSP_NS")) - #define __TZ_set_MSP_NS(VALUE) (__arm_wsr("MSP_NS", (VALUE))) - #define __TZ_get_SP_NS() (__arm_rsr("SP_NS")) - #define __TZ_set_SP_NS(VALUE) (__arm_wsr("SP_NS", (VALUE))) - #define __TZ_get_PRIMASK_NS() (__arm_rsr("PRIMASK_NS")) - #define __TZ_set_PRIMASK_NS(VALUE) (__arm_wsr("PRIMASK_NS", (VALUE))) - #define __TZ_get_BASEPRI_NS() (__arm_rsr("BASEPRI_NS")) - #define __TZ_set_BASEPRI_NS(VALUE) (__arm_wsr("BASEPRI_NS", (VALUE))) - #define __TZ_get_FAULTMASK_NS() (__arm_rsr("FAULTMASK_NS")) - #define __TZ_set_FAULTMASK_NS(VALUE)(__arm_wsr("FAULTMASK_NS", (VALUE))) - - #if (!(defined (__ARM_ARCH_8M_MAIN__ ) && (__ARM_ARCH_8M_MAIN__ == 1)) && \ - (!defined (__ARM_FEATURE_CMSE) || (__ARM_FEATURE_CMSE < 3))) - // without main extensions, the non-secure PSPLIM is RAZ/WI - #define __TZ_get_PSPLIM_NS() (0U) - #define __TZ_set_PSPLIM_NS(VALUE) ((void)(VALUE)) - #else - #define __TZ_get_PSPLIM_NS() (__arm_rsr("PSPLIM_NS")) - #define __TZ_set_PSPLIM_NS(VALUE) (__arm_wsr("PSPLIM_NS", (VALUE))) - #endif - - #define __TZ_get_MSPLIM_NS() (__arm_rsr("MSPLIM_NS")) - #define __TZ_set_MSPLIM_NS(VALUE) (__arm_wsr("MSPLIM_NS", (VALUE))) - - #define __NOP __iar_builtin_no_operation - - #define __CLZ __iar_builtin_CLZ - #define __CLREX __iar_builtin_CLREX - - #define __DMB __iar_builtin_DMB - #define __DSB __iar_builtin_DSB - #define __ISB __iar_builtin_ISB - - #define __LDREXB __iar_builtin_LDREXB - #define __LDREXH __iar_builtin_LDREXH - #define __LDREXW __iar_builtin_LDREX - - #define __RBIT __iar_builtin_RBIT - #define __REV __iar_builtin_REV - #define __REV16 __iar_builtin_REV16 - - __IAR_FT int16_t __REVSH(int16_t val) - { - return (int16_t) __iar_builtin_REVSH(val); - } - - #define __ROR __iar_builtin_ROR - #define __RRX __iar_builtin_RRX - - #define __SEV __iar_builtin_SEV - - #if !__IAR_M0_FAMILY - #define __SSAT __iar_builtin_SSAT - #endif - - #define __STREXB __iar_builtin_STREXB - #define __STREXH __iar_builtin_STREXH - #define __STREXW __iar_builtin_STREX - - #if !__IAR_M0_FAMILY - #define __USAT __iar_builtin_USAT - #endif - - #define __WFE __iar_builtin_WFE - #define __WFI __iar_builtin_WFI - - #if __ARM_MEDIA__ - #define __SADD8 __iar_builtin_SADD8 - #define __QADD8 __iar_builtin_QADD8 - #define __SHADD8 __iar_builtin_SHADD8 - #define __UADD8 __iar_builtin_UADD8 - #define __UQADD8 __iar_builtin_UQADD8 - #define __UHADD8 __iar_builtin_UHADD8 - #define __SSUB8 __iar_builtin_SSUB8 - #define __QSUB8 __iar_builtin_QSUB8 - #define __SHSUB8 __iar_builtin_SHSUB8 - #define __USUB8 __iar_builtin_USUB8 - #define __UQSUB8 __iar_builtin_UQSUB8 - #define __UHSUB8 __iar_builtin_UHSUB8 - #define __SADD16 __iar_builtin_SADD16 - #define __QADD16 __iar_builtin_QADD16 - #define __SHADD16 __iar_builtin_SHADD16 - #define __UADD16 __iar_builtin_UADD16 - #define __UQADD16 __iar_builtin_UQADD16 - #define __UHADD16 __iar_builtin_UHADD16 - #define __SSUB16 __iar_builtin_SSUB16 - #define __QSUB16 __iar_builtin_QSUB16 - #define __SHSUB16 __iar_builtin_SHSUB16 - #define __USUB16 __iar_builtin_USUB16 - #define __UQSUB16 __iar_builtin_UQSUB16 - #define __UHSUB16 __iar_builtin_UHSUB16 - #define __SASX __iar_builtin_SASX - #define __QASX __iar_builtin_QASX - #define __SHASX __iar_builtin_SHASX - #define __UASX __iar_builtin_UASX - #define __UQASX __iar_builtin_UQASX - #define __UHASX __iar_builtin_UHASX - #define __SSAX __iar_builtin_SSAX - #define __QSAX __iar_builtin_QSAX - #define __SHSAX __iar_builtin_SHSAX - #define __USAX __iar_builtin_USAX - #define __UQSAX __iar_builtin_UQSAX - #define __UHSAX __iar_builtin_UHSAX - #define __USAD8 __iar_builtin_USAD8 - #define __USADA8 __iar_builtin_USADA8 - #define __SSAT16 __iar_builtin_SSAT16 - #define __USAT16 __iar_builtin_USAT16 - #define __UXTB16 __iar_builtin_UXTB16 - #define __UXTAB16 __iar_builtin_UXTAB16 - #define __SXTB16 __iar_builtin_SXTB16 - #define __SXTAB16 __iar_builtin_SXTAB16 - #define __SMUAD __iar_builtin_SMUAD - #define __SMUADX __iar_builtin_SMUADX - #define __SMMLA __iar_builtin_SMMLA - #define __SMLAD __iar_builtin_SMLAD - #define __SMLADX __iar_builtin_SMLADX - #define __SMLALD __iar_builtin_SMLALD - #define __SMLALDX __iar_builtin_SMLALDX - #define __SMUSD __iar_builtin_SMUSD - #define __SMUSDX __iar_builtin_SMUSDX - #define __SMLSD __iar_builtin_SMLSD - #define __SMLSDX __iar_builtin_SMLSDX - #define __SMLSLD __iar_builtin_SMLSLD - #define __SMLSLDX __iar_builtin_SMLSLDX - #define __SEL __iar_builtin_SEL - #define __QADD __iar_builtin_QADD - #define __QSUB __iar_builtin_QSUB - #define __PKHBT __iar_builtin_PKHBT - #define __PKHTB __iar_builtin_PKHTB - #endif - -#else /* __ICCARM_INTRINSICS_VERSION__ == 2 */ - - #if __IAR_M0_FAMILY - /* Avoid clash between intrinsics.h and arm_math.h when compiling for Cortex-M0. */ - #define __CLZ __cmsis_iar_clz_not_active - #define __SSAT __cmsis_iar_ssat_not_active - #define __USAT __cmsis_iar_usat_not_active - #define __RBIT __cmsis_iar_rbit_not_active - #define __get_APSR __cmsis_iar_get_APSR_not_active - #endif - - - #if (!((defined (__FPU_PRESENT) && (__FPU_PRESENT == 1U)) && \ - (defined (__FPU_USED ) && (__FPU_USED == 1U)) )) - #define __get_FPSCR __cmsis_iar_get_FPSR_not_active - #define __set_FPSCR __cmsis_iar_set_FPSR_not_active - #endif - - #ifdef __INTRINSICS_INCLUDED - #error intrinsics.h is already included previously! - #endif - - #include - - #if __IAR_M0_FAMILY - /* Avoid clash between intrinsics.h and arm_math.h when compiling for Cortex-M0. */ - #undef __CLZ - #undef __SSAT - #undef __USAT - #undef __RBIT - #undef __get_APSR - - __STATIC_INLINE uint8_t __CLZ(uint32_t data) - { - if (data == 0U) { return 32U; } - - uint32_t count = 0U; - uint32_t mask = 0x80000000U; - - while ((data & mask) == 0U) - { - count += 1U; - mask = mask >> 1U; - } - return count; - } - - __STATIC_INLINE uint32_t __RBIT(uint32_t v) - { - uint8_t sc = 31U; - uint32_t r = v; - for (v >>= 1U; v; v >>= 1U) - { - r <<= 1U; - r |= v & 1U; - sc--; - } - return (r << sc); - } - - __STATIC_INLINE uint32_t __get_APSR(void) - { - uint32_t res; - __asm("MRS %0,APSR" : "=r" (res)); - return res; - } - - #endif - - #if (!((defined (__FPU_PRESENT) && (__FPU_PRESENT == 1U)) && \ - (defined (__FPU_USED ) && (__FPU_USED == 1U)) )) - #undef __get_FPSCR - #undef __set_FPSCR - #define __get_FPSCR() (0) - #define __set_FPSCR(VALUE) ((void)VALUE) - #endif - - #pragma diag_suppress=Pe940 - #pragma diag_suppress=Pe177 - - #define __enable_irq __enable_interrupt - #define __disable_irq __disable_interrupt - #define __NOP __no_operation - - #define __get_xPSR __get_PSR - - #if (!defined(__ARM_ARCH_6M__) || __ARM_ARCH_6M__==0) - - __IAR_FT uint32_t __LDREXW(uint32_t volatile *ptr) - { - return __LDREX((unsigned long *)ptr); - } - - __IAR_FT uint32_t __STREXW(uint32_t value, uint32_t volatile *ptr) - { - return __STREX(value, (unsigned long *)ptr); - } - #endif - - - /* __CORTEX_M is defined in core_cm0.h, core_cm3.h and core_cm4.h. */ - #if (__CORTEX_M >= 0x03) - - __IAR_FT uint32_t __RRX(uint32_t value) - { - uint32_t result; - __ASM("RRX %0, %1" : "=r"(result) : "r" (value) : "cc"); - return(result); - } - - __IAR_FT void __set_BASEPRI_MAX(uint32_t value) - { - __asm volatile("MSR BASEPRI_MAX,%0"::"r" (value)); - } - - - #define __enable_fault_irq __enable_fiq - #define __disable_fault_irq __disable_fiq - - - #endif /* (__CORTEX_M >= 0x03) */ - - __IAR_FT uint32_t __ROR(uint32_t op1, uint32_t op2) - { - return (op1 >> op2) | (op1 << ((sizeof(op1)*8)-op2)); - } - - #if ((defined (__ARM_ARCH_8M_MAIN__ ) && (__ARM_ARCH_8M_MAIN__ == 1)) || \ - (defined (__ARM_ARCH_8M_BASE__ ) && (__ARM_ARCH_8M_BASE__ == 1)) ) - - __IAR_FT uint32_t __get_MSPLIM(void) - { - uint32_t res; - #if (!(defined (__ARM_ARCH_8M_MAIN__ ) && (__ARM_ARCH_8M_MAIN__ == 1)) && \ - (!defined (__ARM_FEATURE_CMSE ) || (__ARM_FEATURE_CMSE < 3))) - // without main extensions, the non-secure MSPLIM is RAZ/WI - res = 0U; - #else - __asm volatile("MRS %0,MSPLIM" : "=r" (res)); - #endif - return res; - } - - __IAR_FT void __set_MSPLIM(uint32_t value) - { - #if (!(defined (__ARM_ARCH_8M_MAIN__ ) && (__ARM_ARCH_8M_MAIN__ == 1)) && \ - (!defined (__ARM_FEATURE_CMSE ) || (__ARM_FEATURE_CMSE < 3))) - // without main extensions, the non-secure MSPLIM is RAZ/WI - (void)value; - #else - __asm volatile("MSR MSPLIM,%0" :: "r" (value)); - #endif - } - - __IAR_FT uint32_t __get_PSPLIM(void) - { - uint32_t res; - #if (!(defined (__ARM_ARCH_8M_MAIN__ ) && (__ARM_ARCH_8M_MAIN__ == 1)) && \ - (!defined (__ARM_FEATURE_CMSE ) || (__ARM_FEATURE_CMSE < 3))) - // without main extensions, the non-secure PSPLIM is RAZ/WI - res = 0U; - #else - __asm volatile("MRS %0,PSPLIM" : "=r" (res)); - #endif - return res; - } - - __IAR_FT void __set_PSPLIM(uint32_t value) - { - #if (!(defined (__ARM_ARCH_8M_MAIN__ ) && (__ARM_ARCH_8M_MAIN__ == 1)) && \ - (!defined (__ARM_FEATURE_CMSE ) || (__ARM_FEATURE_CMSE < 3))) - // without main extensions, the non-secure PSPLIM is RAZ/WI - (void)value; - #else - __asm volatile("MSR PSPLIM,%0" :: "r" (value)); - #endif - } - - __IAR_FT uint32_t __TZ_get_CONTROL_NS(void) - { - uint32_t res; - __asm volatile("MRS %0,CONTROL_NS" : "=r" (res)); - return res; - } - - __IAR_FT void __TZ_set_CONTROL_NS(uint32_t value) - { - __asm volatile("MSR CONTROL_NS,%0" :: "r" (value)); - } - - __IAR_FT uint32_t __TZ_get_PSP_NS(void) - { - uint32_t res; - __asm volatile("MRS %0,PSP_NS" : "=r" (res)); - return res; - } - - __IAR_FT void __TZ_set_PSP_NS(uint32_t value) - { - __asm volatile("MSR PSP_NS,%0" :: "r" (value)); - } - - __IAR_FT uint32_t __TZ_get_MSP_NS(void) - { - uint32_t res; - __asm volatile("MRS %0,MSP_NS" : "=r" (res)); - return res; - } - - __IAR_FT void __TZ_set_MSP_NS(uint32_t value) - { - __asm volatile("MSR MSP_NS,%0" :: "r" (value)); - } - - __IAR_FT uint32_t __TZ_get_SP_NS(void) - { - uint32_t res; - __asm volatile("MRS %0,SP_NS" : "=r" (res)); - return res; - } - __IAR_FT void __TZ_set_SP_NS(uint32_t value) - { - __asm volatile("MSR SP_NS,%0" :: "r" (value)); - } - - __IAR_FT uint32_t __TZ_get_PRIMASK_NS(void) - { - uint32_t res; - __asm volatile("MRS %0,PRIMASK_NS" : "=r" (res)); - return res; - } - - __IAR_FT void __TZ_set_PRIMASK_NS(uint32_t value) - { - __asm volatile("MSR PRIMASK_NS,%0" :: "r" (value)); - } - - __IAR_FT uint32_t __TZ_get_BASEPRI_NS(void) - { - uint32_t res; - __asm volatile("MRS %0,BASEPRI_NS" : "=r" (res)); - return res; - } - - __IAR_FT void __TZ_set_BASEPRI_NS(uint32_t value) - { - __asm volatile("MSR BASEPRI_NS,%0" :: "r" (value)); - } - - __IAR_FT uint32_t __TZ_get_FAULTMASK_NS(void) - { - uint32_t res; - __asm volatile("MRS %0,FAULTMASK_NS" : "=r" (res)); - return res; - } - - __IAR_FT void __TZ_set_FAULTMASK_NS(uint32_t value) - { - __asm volatile("MSR FAULTMASK_NS,%0" :: "r" (value)); - } - - __IAR_FT uint32_t __TZ_get_PSPLIM_NS(void) - { - uint32_t res; - #if (!(defined (__ARM_ARCH_8M_MAIN__ ) && (__ARM_ARCH_8M_MAIN__ == 1)) && \ - (!defined (__ARM_FEATURE_CMSE ) || (__ARM_FEATURE_CMSE < 3))) - // without main extensions, the non-secure PSPLIM is RAZ/WI - res = 0U; - #else - __asm volatile("MRS %0,PSPLIM_NS" : "=r" (res)); - #endif - return res; - } - - __IAR_FT void __TZ_set_PSPLIM_NS(uint32_t value) - { - #if (!(defined (__ARM_ARCH_8M_MAIN__ ) && (__ARM_ARCH_8M_MAIN__ == 1)) && \ - (!defined (__ARM_FEATURE_CMSE ) || (__ARM_FEATURE_CMSE < 3))) - // without main extensions, the non-secure PSPLIM is RAZ/WI - (void)value; - #else - __asm volatile("MSR PSPLIM_NS,%0" :: "r" (value)); - #endif - } - - __IAR_FT uint32_t __TZ_get_MSPLIM_NS(void) - { - uint32_t res; - __asm volatile("MRS %0,MSPLIM_NS" : "=r" (res)); - return res; - } - - __IAR_FT void __TZ_set_MSPLIM_NS(uint32_t value) - { - __asm volatile("MSR MSPLIM_NS,%0" :: "r" (value)); - } - - #endif /* __ARM_ARCH_8M_MAIN__ or __ARM_ARCH_8M_BASE__ */ - -#endif /* __ICCARM_INTRINSICS_VERSION__ == 2 */ - -#define __BKPT(value) __asm volatile ("BKPT %0" : : "i"(value)) - -#if __IAR_M0_FAMILY - __STATIC_INLINE int32_t __SSAT(int32_t val, uint32_t sat) - { - if ((sat >= 1U) && (sat <= 32U)) - { - const int32_t max = (int32_t)((1U << (sat - 1U)) - 1U); - const int32_t min = -1 - max ; - if (val > max) - { - return max; - } - else if (val < min) - { - return min; - } - } - return val; - } - - __STATIC_INLINE uint32_t __USAT(int32_t val, uint32_t sat) - { - if (sat <= 31U) - { - const uint32_t max = ((1U << sat) - 1U); - if (val > (int32_t)max) - { - return max; - } - else if (val < 0) - { - return 0U; - } - } - return (uint32_t)val; - } -#endif - -#if (__CORTEX_M >= 0x03) /* __CORTEX_M is defined in core_cm0.h, core_cm3.h and core_cm4.h. */ - - __IAR_FT uint8_t __LDRBT(volatile uint8_t *addr) - { - uint32_t res; - __ASM("LDRBT %0, [%1]" : "=r" (res) : "r" (addr) : "memory"); - return ((uint8_t)res); - } - - __IAR_FT uint16_t __LDRHT(volatile uint16_t *addr) - { - uint32_t res; - __ASM("LDRHT %0, [%1]" : "=r" (res) : "r" (addr) : "memory"); - return ((uint16_t)res); - } - - __IAR_FT uint32_t __LDRT(volatile uint32_t *addr) - { - uint32_t res; - __ASM("LDRT %0, [%1]" : "=r" (res) : "r" (addr) : "memory"); - return res; - } - - __IAR_FT void __STRBT(uint8_t value, volatile uint8_t *addr) - { - __ASM("STRBT %1, [%0]" : : "r" (addr), "r" ((uint32_t)value) : "memory"); - } - - __IAR_FT void __STRHT(uint16_t value, volatile uint16_t *addr) - { - __ASM("STRHT %1, [%0]" : : "r" (addr), "r" ((uint32_t)value) : "memory"); - } - - __IAR_FT void __STRT(uint32_t value, volatile uint32_t *addr) - { - __ASM("STRT %1, [%0]" : : "r" (addr), "r" (value) : "memory"); - } - -#endif /* (__CORTEX_M >= 0x03) */ - -#if ((defined (__ARM_ARCH_8M_MAIN__ ) && (__ARM_ARCH_8M_MAIN__ == 1)) || \ - (defined (__ARM_ARCH_8M_BASE__ ) && (__ARM_ARCH_8M_BASE__ == 1)) ) - - - __IAR_FT uint8_t __LDAB(volatile uint8_t *ptr) - { - uint32_t res; - __ASM volatile ("LDAB %0, [%1]" : "=r" (res) : "r" (ptr) : "memory"); - return ((uint8_t)res); - } - - __IAR_FT uint16_t __LDAH(volatile uint16_t *ptr) - { - uint32_t res; - __ASM volatile ("LDAH %0, [%1]" : "=r" (res) : "r" (ptr) : "memory"); - return ((uint16_t)res); - } - - __IAR_FT uint32_t __LDA(volatile uint32_t *ptr) - { - uint32_t res; - __ASM volatile ("LDA %0, [%1]" : "=r" (res) : "r" (ptr) : "memory"); - return res; - } - - __IAR_FT void __STLB(uint8_t value, volatile uint8_t *ptr) - { - __ASM volatile ("STLB %1, [%0]" :: "r" (ptr), "r" (value) : "memory"); - } - - __IAR_FT void __STLH(uint16_t value, volatile uint16_t *ptr) - { - __ASM volatile ("STLH %1, [%0]" :: "r" (ptr), "r" (value) : "memory"); - } - - __IAR_FT void __STL(uint32_t value, volatile uint32_t *ptr) - { - __ASM volatile ("STL %1, [%0]" :: "r" (ptr), "r" (value) : "memory"); - } - - __IAR_FT uint8_t __LDAEXB(volatile uint8_t *ptr) - { - uint32_t res; - __ASM volatile ("LDAEXB %0, [%1]" : "=r" (res) : "r" (ptr) : "memory"); - return ((uint8_t)res); - } - - __IAR_FT uint16_t __LDAEXH(volatile uint16_t *ptr) - { - uint32_t res; - __ASM volatile ("LDAEXH %0, [%1]" : "=r" (res) : "r" (ptr) : "memory"); - return ((uint16_t)res); - } - - __IAR_FT uint32_t __LDAEX(volatile uint32_t *ptr) - { - uint32_t res; - __ASM volatile ("LDAEX %0, [%1]" : "=r" (res) : "r" (ptr) : "memory"); - return res; - } - - __IAR_FT uint32_t __STLEXB(uint8_t value, volatile uint8_t *ptr) - { - uint32_t res; - __ASM volatile ("STLEXB %0, %2, [%1]" : "=r" (res) : "r" (ptr), "r" (value) : "memory"); - return res; - } - - __IAR_FT uint32_t __STLEXH(uint16_t value, volatile uint16_t *ptr) - { - uint32_t res; - __ASM volatile ("STLEXH %0, %2, [%1]" : "=r" (res) : "r" (ptr), "r" (value) : "memory"); - return res; - } - - __IAR_FT uint32_t __STLEX(uint32_t value, volatile uint32_t *ptr) - { - uint32_t res; - __ASM volatile ("STLEX %0, %2, [%1]" : "=r" (res) : "r" (ptr), "r" (value) : "memory"); - return res; - } - -#endif /* __ARM_ARCH_8M_MAIN__ or __ARM_ARCH_8M_BASE__ */ - -#undef __IAR_FT -#undef __IAR_M0_FAMILY -#undef __ICCARM_V8 - -#pragma diag_default=Pe940 -#pragma diag_default=Pe177 - -#endif /* __CMSIS_ICCARM_H__ */ diff --git a/test_dma/Drivers/CMSIS/Include/cmsis_version.h b/test_dma/Drivers/CMSIS/Include/cmsis_version.h deleted file mode 100644 index ae3f2e3..0000000 --- a/test_dma/Drivers/CMSIS/Include/cmsis_version.h +++ /dev/null @@ -1,39 +0,0 @@ -/**************************************************************************//** - * @file cmsis_version.h - * @brief CMSIS Core(M) Version definitions - * @version V5.0.2 - * @date 19. April 2017 - ******************************************************************************/ -/* - * Copyright (c) 2009-2017 ARM Limited. All rights reserved. - * - * SPDX-License-Identifier: Apache-2.0 - * - * Licensed under the Apache License, Version 2.0 (the License); you may - * not use this file except in compliance with the License. - * You may obtain a copy of the License at - * - * www.apache.org/licenses/LICENSE-2.0 - * - * Unless required by applicable law or agreed to in writing, software - * distributed under the License is distributed on an AS IS BASIS, WITHOUT - * WARRANTIES OR CONDITIONS OF ANY KIND, either express or implied. - * See the License for the specific language governing permissions and - * limitations under the License. - */ - -#if defined ( __ICCARM__ ) - #pragma system_include /* treat file as system include file for MISRA check */ -#elif defined (__clang__) - #pragma clang system_header /* treat file as system include file */ -#endif - -#ifndef __CMSIS_VERSION_H -#define __CMSIS_VERSION_H - -/* CMSIS Version definitions */ -#define __CM_CMSIS_VERSION_MAIN ( 5U) /*!< [31:16] CMSIS Core(M) main version */ -#define __CM_CMSIS_VERSION_SUB ( 1U) /*!< [15:0] CMSIS Core(M) sub version */ -#define __CM_CMSIS_VERSION ((__CM_CMSIS_VERSION_MAIN << 16U) | \ - __CM_CMSIS_VERSION_SUB ) /*!< CMSIS Core(M) version number */ -#endif diff --git a/test_dma/Drivers/CMSIS/Include/core_armv8mbl.h b/test_dma/Drivers/CMSIS/Include/core_armv8mbl.h deleted file mode 100644 index ec76ab2..0000000 --- a/test_dma/Drivers/CMSIS/Include/core_armv8mbl.h +++ /dev/null @@ -1,1918 +0,0 @@ -/**************************************************************************//** - * @file core_armv8mbl.h - * @brief CMSIS Armv8-M Baseline Core Peripheral Access Layer Header File - * @version V5.0.7 - * @date 22. June 2018 - ******************************************************************************/ -/* - * Copyright (c) 2009-2018 Arm Limited. All rights reserved. - * - * SPDX-License-Identifier: Apache-2.0 - * - * Licensed under the Apache License, Version 2.0 (the License); you may - * not use this file except in compliance with the License. - * You may obtain a copy of the License at - * - * www.apache.org/licenses/LICENSE-2.0 - * - * Unless required by applicable law or agreed to in writing, software - * distributed under the License is distributed on an AS IS BASIS, WITHOUT - * WARRANTIES OR CONDITIONS OF ANY KIND, either express or implied. - * See the License for the specific language governing permissions and - * limitations under the License. - */ - -#if defined ( __ICCARM__ ) - #pragma system_include /* treat file as system include file for MISRA check */ -#elif defined (__clang__) - #pragma clang system_header /* treat file as system include file */ -#endif - -#ifndef __CORE_ARMV8MBL_H_GENERIC -#define __CORE_ARMV8MBL_H_GENERIC - -#include - -#ifdef __cplusplus - extern "C" { -#endif - -/** - \page CMSIS_MISRA_Exceptions MISRA-C:2004 Compliance Exceptions - CMSIS violates the following MISRA-C:2004 rules: - - \li Required Rule 8.5, object/function definition in header file.
- Function definitions in header files are used to allow 'inlining'. - - \li Required Rule 18.4, declaration of union type or object of union type: '{...}'.
- Unions are used for effective representation of core registers. - - \li Advisory Rule 19.7, Function-like macro defined.
- Function-like macros are used to allow more efficient code. - */ - - -/******************************************************************************* - * CMSIS definitions - ******************************************************************************/ -/** - \ingroup Cortex_ARMv8MBL - @{ - */ - -#include "cmsis_version.h" - -/* CMSIS definitions */ -#define __ARMv8MBL_CMSIS_VERSION_MAIN (__CM_CMSIS_VERSION_MAIN) /*!< \deprecated [31:16] CMSIS HAL main version */ -#define __ARMv8MBL_CMSIS_VERSION_SUB (__CM_CMSIS_VERSION_SUB) /*!< \deprecated [15:0] CMSIS HAL sub version */ -#define __ARMv8MBL_CMSIS_VERSION ((__ARMv8MBL_CMSIS_VERSION_MAIN << 16U) | \ - __ARMv8MBL_CMSIS_VERSION_SUB ) /*!< \deprecated CMSIS HAL version number */ - -#define __CORTEX_M ( 2U) /*!< Cortex-M Core */ - -/** __FPU_USED indicates whether an FPU is used or not. - This core does not support an FPU at all -*/ -#define __FPU_USED 0U - -#if defined ( __CC_ARM ) - #if defined __TARGET_FPU_VFP - #error "Compiler generates FPU instructions for a device without an FPU (check __FPU_PRESENT)" - #endif - -#elif defined (__ARMCC_VERSION) && (__ARMCC_VERSION >= 6010050) - #if defined __ARM_PCS_VFP - #error "Compiler generates FPU instructions for a device without an FPU (check __FPU_PRESENT)" - #endif - -#elif defined ( __GNUC__ ) - #if defined (__VFP_FP__) && !defined(__SOFTFP__) - #error "Compiler generates FPU instructions for a device without an FPU (check __FPU_PRESENT)" - #endif - -#elif defined ( __ICCARM__ ) - #if defined __ARMVFP__ - #error "Compiler generates FPU instructions for a device without an FPU (check __FPU_PRESENT)" - #endif - -#elif defined ( __TI_ARM__ ) - #if defined __TI_VFP_SUPPORT__ - #error "Compiler generates FPU instructions for a device without an FPU (check __FPU_PRESENT)" - #endif - -#elif defined ( __TASKING__ ) - #if defined __FPU_VFP__ - #error "Compiler generates FPU instructions for a device without an FPU (check __FPU_PRESENT)" - #endif - -#elif defined ( __CSMC__ ) - #if ( __CSMC__ & 0x400U) - #error "Compiler generates FPU instructions for a device without an FPU (check __FPU_PRESENT)" - #endif - -#endif - -#include "cmsis_compiler.h" /* CMSIS compiler specific defines */ - - -#ifdef __cplusplus -} -#endif - -#endif /* __CORE_ARMV8MBL_H_GENERIC */ - -#ifndef __CMSIS_GENERIC - -#ifndef __CORE_ARMV8MBL_H_DEPENDANT -#define __CORE_ARMV8MBL_H_DEPENDANT - -#ifdef __cplusplus - extern "C" { -#endif - -/* check device defines and use defaults */ -#if defined __CHECK_DEVICE_DEFINES - #ifndef __ARMv8MBL_REV - #define __ARMv8MBL_REV 0x0000U - #warning "__ARMv8MBL_REV not defined in device header file; using default!" - #endif - - #ifndef __FPU_PRESENT - #define __FPU_PRESENT 0U - #warning "__FPU_PRESENT not defined in device header file; using default!" - #endif - - #ifndef __MPU_PRESENT - #define __MPU_PRESENT 0U - #warning "__MPU_PRESENT not defined in device header file; using default!" - #endif - - #ifndef __SAUREGION_PRESENT - #define __SAUREGION_PRESENT 0U - #warning "__SAUREGION_PRESENT not defined in device header file; using default!" - #endif - - #ifndef __VTOR_PRESENT - #define __VTOR_PRESENT 0U - #warning "__VTOR_PRESENT not defined in device header file; using default!" - #endif - - #ifndef __NVIC_PRIO_BITS - #define __NVIC_PRIO_BITS 2U - #warning "__NVIC_PRIO_BITS not defined in device header file; using default!" - #endif - - #ifndef __Vendor_SysTickConfig - #define __Vendor_SysTickConfig 0U - #warning "__Vendor_SysTickConfig not defined in device header file; using default!" - #endif - - #ifndef __ETM_PRESENT - #define __ETM_PRESENT 0U - #warning "__ETM_PRESENT not defined in device header file; using default!" - #endif - - #ifndef __MTB_PRESENT - #define __MTB_PRESENT 0U - #warning "__MTB_PRESENT not defined in device header file; using default!" - #endif - -#endif - -/* IO definitions (access restrictions to peripheral registers) */ -/** - \defgroup CMSIS_glob_defs CMSIS Global Defines - - IO Type Qualifiers are used - \li to specify the access to peripheral variables. - \li for automatic generation of peripheral register debug information. -*/ -#ifdef __cplusplus - #define __I volatile /*!< Defines 'read only' permissions */ -#else - #define __I volatile const /*!< Defines 'read only' permissions */ -#endif -#define __O volatile /*!< Defines 'write only' permissions */ -#define __IO volatile /*!< Defines 'read / write' permissions */ - -/* following defines should be used for structure members */ -#define __IM volatile const /*! Defines 'read only' structure member permissions */ -#define __OM volatile /*! Defines 'write only' structure member permissions */ -#define __IOM volatile /*! Defines 'read / write' structure member permissions */ - -/*@} end of group ARMv8MBL */ - - - -/******************************************************************************* - * Register Abstraction - Core Register contain: - - Core Register - - Core NVIC Register - - Core SCB Register - - Core SysTick Register - - Core Debug Register - - Core MPU Register - - Core SAU Register - ******************************************************************************/ -/** - \defgroup CMSIS_core_register Defines and Type Definitions - \brief Type definitions and defines for Cortex-M processor based devices. -*/ - -/** - \ingroup CMSIS_core_register - \defgroup CMSIS_CORE Status and Control Registers - \brief Core Register type definitions. - @{ - */ - -/** - \brief Union type to access the Application Program Status Register (APSR). - */ -typedef union -{ - struct - { - uint32_t _reserved0:28; /*!< bit: 0..27 Reserved */ - uint32_t V:1; /*!< bit: 28 Overflow condition code flag */ - uint32_t C:1; /*!< bit: 29 Carry condition code flag */ - uint32_t Z:1; /*!< bit: 30 Zero condition code flag */ - uint32_t N:1; /*!< bit: 31 Negative condition code flag */ - } b; /*!< Structure used for bit access */ - uint32_t w; /*!< Type used for word access */ -} APSR_Type; - -/* APSR Register Definitions */ -#define APSR_N_Pos 31U /*!< APSR: N Position */ -#define APSR_N_Msk (1UL << APSR_N_Pos) /*!< APSR: N Mask */ - -#define APSR_Z_Pos 30U /*!< APSR: Z Position */ -#define APSR_Z_Msk (1UL << APSR_Z_Pos) /*!< APSR: Z Mask */ - -#define APSR_C_Pos 29U /*!< APSR: C Position */ -#define APSR_C_Msk (1UL << APSR_C_Pos) /*!< APSR: C Mask */ - -#define APSR_V_Pos 28U /*!< APSR: V Position */ -#define APSR_V_Msk (1UL << APSR_V_Pos) /*!< APSR: V Mask */ - - -/** - \brief Union type to access the Interrupt Program Status Register (IPSR). - */ -typedef union -{ - struct - { - uint32_t ISR:9; /*!< bit: 0.. 8 Exception number */ - uint32_t _reserved0:23; /*!< bit: 9..31 Reserved */ - } b; /*!< Structure used for bit access */ - uint32_t w; /*!< Type used for word access */ -} IPSR_Type; - -/* IPSR Register Definitions */ -#define IPSR_ISR_Pos 0U /*!< IPSR: ISR Position */ -#define IPSR_ISR_Msk (0x1FFUL /*<< IPSR_ISR_Pos*/) /*!< IPSR: ISR Mask */ - - -/** - \brief Union type to access the Special-Purpose Program Status Registers (xPSR). - */ -typedef union -{ - struct - { - uint32_t ISR:9; /*!< bit: 0.. 8 Exception number */ - uint32_t _reserved0:15; /*!< bit: 9..23 Reserved */ - uint32_t T:1; /*!< bit: 24 Thumb bit (read 0) */ - uint32_t _reserved1:3; /*!< bit: 25..27 Reserved */ - uint32_t V:1; /*!< bit: 28 Overflow condition code flag */ - uint32_t C:1; /*!< bit: 29 Carry condition code flag */ - uint32_t Z:1; /*!< bit: 30 Zero condition code flag */ - uint32_t N:1; /*!< bit: 31 Negative condition code flag */ - } b; /*!< Structure used for bit access */ - uint32_t w; /*!< Type used for word access */ -} xPSR_Type; - -/* xPSR Register Definitions */ -#define xPSR_N_Pos 31U /*!< xPSR: N Position */ -#define xPSR_N_Msk (1UL << xPSR_N_Pos) /*!< xPSR: N Mask */ - -#define xPSR_Z_Pos 30U /*!< xPSR: Z Position */ -#define xPSR_Z_Msk (1UL << xPSR_Z_Pos) /*!< xPSR: Z Mask */ - -#define xPSR_C_Pos 29U /*!< xPSR: C Position */ -#define xPSR_C_Msk (1UL << xPSR_C_Pos) /*!< xPSR: C Mask */ - -#define xPSR_V_Pos 28U /*!< xPSR: V Position */ -#define xPSR_V_Msk (1UL << xPSR_V_Pos) /*!< xPSR: V Mask */ - -#define xPSR_T_Pos 24U /*!< xPSR: T Position */ -#define xPSR_T_Msk (1UL << xPSR_T_Pos) /*!< xPSR: T Mask */ - -#define xPSR_ISR_Pos 0U /*!< xPSR: ISR Position */ -#define xPSR_ISR_Msk (0x1FFUL /*<< xPSR_ISR_Pos*/) /*!< xPSR: ISR Mask */ - - -/** - \brief Union type to access the Control Registers (CONTROL). - */ -typedef union -{ - struct - { - uint32_t nPRIV:1; /*!< bit: 0 Execution privilege in Thread mode */ - uint32_t SPSEL:1; /*!< bit: 1 Stack-pointer select */ - uint32_t _reserved1:30; /*!< bit: 2..31 Reserved */ - } b; /*!< Structure used for bit access */ - uint32_t w; /*!< Type used for word access */ -} CONTROL_Type; - -/* CONTROL Register Definitions */ -#define CONTROL_SPSEL_Pos 1U /*!< CONTROL: SPSEL Position */ -#define CONTROL_SPSEL_Msk (1UL << CONTROL_SPSEL_Pos) /*!< CONTROL: SPSEL Mask */ - -#define CONTROL_nPRIV_Pos 0U /*!< CONTROL: nPRIV Position */ -#define CONTROL_nPRIV_Msk (1UL /*<< CONTROL_nPRIV_Pos*/) /*!< CONTROL: nPRIV Mask */ - -/*@} end of group CMSIS_CORE */ - - -/** - \ingroup CMSIS_core_register - \defgroup CMSIS_NVIC Nested Vectored Interrupt Controller (NVIC) - \brief Type definitions for the NVIC Registers - @{ - */ - -/** - \brief Structure type to access the Nested Vectored Interrupt Controller (NVIC). - */ -typedef struct -{ - __IOM uint32_t ISER[16U]; /*!< Offset: 0x000 (R/W) Interrupt Set Enable Register */ - uint32_t RESERVED0[16U]; - __IOM uint32_t ICER[16U]; /*!< Offset: 0x080 (R/W) Interrupt Clear Enable Register */ - uint32_t RSERVED1[16U]; - __IOM uint32_t ISPR[16U]; /*!< Offset: 0x100 (R/W) Interrupt Set Pending Register */ - uint32_t RESERVED2[16U]; - __IOM uint32_t ICPR[16U]; /*!< Offset: 0x180 (R/W) Interrupt Clear Pending Register */ - uint32_t RESERVED3[16U]; - __IOM uint32_t IABR[16U]; /*!< Offset: 0x200 (R/W) Interrupt Active bit Register */ - uint32_t RESERVED4[16U]; - __IOM uint32_t ITNS[16U]; /*!< Offset: 0x280 (R/W) Interrupt Non-Secure State Register */ - uint32_t RESERVED5[16U]; - __IOM uint32_t IPR[124U]; /*!< Offset: 0x300 (R/W) Interrupt Priority Register */ -} NVIC_Type; - -/*@} end of group CMSIS_NVIC */ - - -/** - \ingroup CMSIS_core_register - \defgroup CMSIS_SCB System Control Block (SCB) - \brief Type definitions for the System Control Block Registers - @{ - */ - -/** - \brief Structure type to access the System Control Block (SCB). - */ -typedef struct -{ - __IM uint32_t CPUID; /*!< Offset: 0x000 (R/ ) CPUID Base Register */ - __IOM uint32_t ICSR; /*!< Offset: 0x004 (R/W) Interrupt Control and State Register */ -#if defined (__VTOR_PRESENT) && (__VTOR_PRESENT == 1U) - __IOM uint32_t VTOR; /*!< Offset: 0x008 (R/W) Vector Table Offset Register */ -#else - uint32_t RESERVED0; -#endif - __IOM uint32_t AIRCR; /*!< Offset: 0x00C (R/W) Application Interrupt and Reset Control Register */ - __IOM uint32_t SCR; /*!< Offset: 0x010 (R/W) System Control Register */ - __IOM uint32_t CCR; /*!< Offset: 0x014 (R/W) Configuration Control Register */ - uint32_t RESERVED1; - __IOM uint32_t SHPR[2U]; /*!< Offset: 0x01C (R/W) System Handlers Priority Registers. [0] is RESERVED */ - __IOM uint32_t SHCSR; /*!< Offset: 0x024 (R/W) System Handler Control and State Register */ -} SCB_Type; - -/* SCB CPUID Register Definitions */ -#define SCB_CPUID_IMPLEMENTER_Pos 24U /*!< SCB CPUID: IMPLEMENTER Position */ -#define SCB_CPUID_IMPLEMENTER_Msk (0xFFUL << SCB_CPUID_IMPLEMENTER_Pos) /*!< SCB CPUID: IMPLEMENTER Mask */ - -#define SCB_CPUID_VARIANT_Pos 20U /*!< SCB CPUID: VARIANT Position */ -#define SCB_CPUID_VARIANT_Msk (0xFUL << SCB_CPUID_VARIANT_Pos) /*!< SCB CPUID: VARIANT Mask */ - -#define SCB_CPUID_ARCHITECTURE_Pos 16U /*!< SCB CPUID: ARCHITECTURE Position */ -#define SCB_CPUID_ARCHITECTURE_Msk (0xFUL << SCB_CPUID_ARCHITECTURE_Pos) /*!< SCB CPUID: ARCHITECTURE Mask */ - -#define SCB_CPUID_PARTNO_Pos 4U /*!< SCB CPUID: PARTNO Position */ -#define SCB_CPUID_PARTNO_Msk (0xFFFUL << SCB_CPUID_PARTNO_Pos) /*!< SCB CPUID: PARTNO Mask */ - -#define SCB_CPUID_REVISION_Pos 0U /*!< SCB CPUID: REVISION Position */ -#define SCB_CPUID_REVISION_Msk (0xFUL /*<< SCB_CPUID_REVISION_Pos*/) /*!< SCB CPUID: REVISION Mask */ - -/* SCB Interrupt Control State Register Definitions */ -#define SCB_ICSR_PENDNMISET_Pos 31U /*!< SCB ICSR: PENDNMISET Position */ -#define SCB_ICSR_PENDNMISET_Msk (1UL << SCB_ICSR_PENDNMISET_Pos) /*!< SCB ICSR: PENDNMISET Mask */ - -#define SCB_ICSR_NMIPENDSET_Pos SCB_ICSR_PENDNMISET_Pos /*!< SCB ICSR: NMIPENDSET Position, backward compatibility */ -#define SCB_ICSR_NMIPENDSET_Msk SCB_ICSR_PENDNMISET_Msk /*!< SCB ICSR: NMIPENDSET Mask, backward compatibility */ - -#define SCB_ICSR_PENDNMICLR_Pos 30U /*!< SCB ICSR: PENDNMICLR Position */ -#define SCB_ICSR_PENDNMICLR_Msk (1UL << SCB_ICSR_PENDNMICLR_Pos) /*!< SCB ICSR: PENDNMICLR Mask */ - -#define SCB_ICSR_PENDSVSET_Pos 28U /*!< SCB ICSR: PENDSVSET Position */ -#define SCB_ICSR_PENDSVSET_Msk (1UL << SCB_ICSR_PENDSVSET_Pos) /*!< SCB ICSR: PENDSVSET Mask */ - -#define SCB_ICSR_PENDSVCLR_Pos 27U /*!< SCB ICSR: PENDSVCLR Position */ -#define SCB_ICSR_PENDSVCLR_Msk (1UL << SCB_ICSR_PENDSVCLR_Pos) /*!< SCB ICSR: PENDSVCLR Mask */ - -#define SCB_ICSR_PENDSTSET_Pos 26U /*!< SCB ICSR: PENDSTSET Position */ -#define SCB_ICSR_PENDSTSET_Msk (1UL << SCB_ICSR_PENDSTSET_Pos) /*!< SCB ICSR: PENDSTSET Mask */ - -#define SCB_ICSR_PENDSTCLR_Pos 25U /*!< SCB ICSR: PENDSTCLR Position */ -#define SCB_ICSR_PENDSTCLR_Msk (1UL << SCB_ICSR_PENDSTCLR_Pos) /*!< SCB ICSR: PENDSTCLR Mask */ - -#define SCB_ICSR_STTNS_Pos 24U /*!< SCB ICSR: STTNS Position (Security Extension) */ -#define SCB_ICSR_STTNS_Msk (1UL << SCB_ICSR_STTNS_Pos) /*!< SCB ICSR: STTNS Mask (Security Extension) */ - -#define SCB_ICSR_ISRPREEMPT_Pos 23U /*!< SCB ICSR: ISRPREEMPT Position */ -#define SCB_ICSR_ISRPREEMPT_Msk (1UL << SCB_ICSR_ISRPREEMPT_Pos) /*!< SCB ICSR: ISRPREEMPT Mask */ - -#define SCB_ICSR_ISRPENDING_Pos 22U /*!< SCB ICSR: ISRPENDING Position */ -#define SCB_ICSR_ISRPENDING_Msk (1UL << SCB_ICSR_ISRPENDING_Pos) /*!< SCB ICSR: ISRPENDING Mask */ - -#define SCB_ICSR_VECTPENDING_Pos 12U /*!< SCB ICSR: VECTPENDING Position */ -#define SCB_ICSR_VECTPENDING_Msk (0x1FFUL << SCB_ICSR_VECTPENDING_Pos) /*!< SCB ICSR: VECTPENDING Mask */ - -#define SCB_ICSR_RETTOBASE_Pos 11U /*!< SCB ICSR: RETTOBASE Position */ -#define SCB_ICSR_RETTOBASE_Msk (1UL << SCB_ICSR_RETTOBASE_Pos) /*!< SCB ICSR: RETTOBASE Mask */ - -#define SCB_ICSR_VECTACTIVE_Pos 0U /*!< SCB ICSR: VECTACTIVE Position */ -#define SCB_ICSR_VECTACTIVE_Msk (0x1FFUL /*<< SCB_ICSR_VECTACTIVE_Pos*/) /*!< SCB ICSR: VECTACTIVE Mask */ - -#if defined (__VTOR_PRESENT) && (__VTOR_PRESENT == 1U) -/* SCB Vector Table Offset Register Definitions */ -#define SCB_VTOR_TBLOFF_Pos 7U /*!< SCB VTOR: TBLOFF Position */ -#define SCB_VTOR_TBLOFF_Msk (0x1FFFFFFUL << SCB_VTOR_TBLOFF_Pos) /*!< SCB VTOR: TBLOFF Mask */ -#endif - -/* SCB Application Interrupt and Reset Control Register Definitions */ -#define SCB_AIRCR_VECTKEY_Pos 16U /*!< SCB AIRCR: VECTKEY Position */ -#define SCB_AIRCR_VECTKEY_Msk (0xFFFFUL << SCB_AIRCR_VECTKEY_Pos) /*!< SCB AIRCR: VECTKEY Mask */ - -#define SCB_AIRCR_VECTKEYSTAT_Pos 16U /*!< SCB AIRCR: VECTKEYSTAT Position */ -#define SCB_AIRCR_VECTKEYSTAT_Msk (0xFFFFUL << SCB_AIRCR_VECTKEYSTAT_Pos) /*!< SCB AIRCR: VECTKEYSTAT Mask */ - -#define SCB_AIRCR_ENDIANESS_Pos 15U /*!< SCB AIRCR: ENDIANESS Position */ -#define SCB_AIRCR_ENDIANESS_Msk (1UL << SCB_AIRCR_ENDIANESS_Pos) /*!< SCB AIRCR: ENDIANESS Mask */ - -#define SCB_AIRCR_PRIS_Pos 14U /*!< SCB AIRCR: PRIS Position */ -#define SCB_AIRCR_PRIS_Msk (1UL << SCB_AIRCR_PRIS_Pos) /*!< SCB AIRCR: PRIS Mask */ - -#define SCB_AIRCR_BFHFNMINS_Pos 13U /*!< SCB AIRCR: BFHFNMINS Position */ -#define SCB_AIRCR_BFHFNMINS_Msk (1UL << SCB_AIRCR_BFHFNMINS_Pos) /*!< SCB AIRCR: BFHFNMINS Mask */ - -#define SCB_AIRCR_SYSRESETREQS_Pos 3U /*!< SCB AIRCR: SYSRESETREQS Position */ -#define SCB_AIRCR_SYSRESETREQS_Msk (1UL << SCB_AIRCR_SYSRESETREQS_Pos) /*!< SCB AIRCR: SYSRESETREQS Mask */ - -#define SCB_AIRCR_SYSRESETREQ_Pos 2U /*!< SCB AIRCR: SYSRESETREQ Position */ -#define SCB_AIRCR_SYSRESETREQ_Msk (1UL << SCB_AIRCR_SYSRESETREQ_Pos) /*!< SCB AIRCR: SYSRESETREQ Mask */ - -#define SCB_AIRCR_VECTCLRACTIVE_Pos 1U /*!< SCB AIRCR: VECTCLRACTIVE Position */ -#define SCB_AIRCR_VECTCLRACTIVE_Msk (1UL << SCB_AIRCR_VECTCLRACTIVE_Pos) /*!< SCB AIRCR: VECTCLRACTIVE Mask */ - -/* SCB System Control Register Definitions */ -#define SCB_SCR_SEVONPEND_Pos 4U /*!< SCB SCR: SEVONPEND Position */ -#define SCB_SCR_SEVONPEND_Msk (1UL << SCB_SCR_SEVONPEND_Pos) /*!< SCB SCR: SEVONPEND Mask */ - -#define SCB_SCR_SLEEPDEEPS_Pos 3U /*!< SCB SCR: SLEEPDEEPS Position */ -#define SCB_SCR_SLEEPDEEPS_Msk (1UL << SCB_SCR_SLEEPDEEPS_Pos) /*!< SCB SCR: SLEEPDEEPS Mask */ - -#define SCB_SCR_SLEEPDEEP_Pos 2U /*!< SCB SCR: SLEEPDEEP Position */ -#define SCB_SCR_SLEEPDEEP_Msk (1UL << SCB_SCR_SLEEPDEEP_Pos) /*!< SCB SCR: SLEEPDEEP Mask */ - -#define SCB_SCR_SLEEPONEXIT_Pos 1U /*!< SCB SCR: SLEEPONEXIT Position */ -#define SCB_SCR_SLEEPONEXIT_Msk (1UL << SCB_SCR_SLEEPONEXIT_Pos) /*!< SCB SCR: SLEEPONEXIT Mask */ - -/* SCB Configuration Control Register Definitions */ -#define SCB_CCR_BP_Pos 18U /*!< SCB CCR: BP Position */ -#define SCB_CCR_BP_Msk (1UL << SCB_CCR_BP_Pos) /*!< SCB CCR: BP Mask */ - -#define SCB_CCR_IC_Pos 17U /*!< SCB CCR: IC Position */ -#define SCB_CCR_IC_Msk (1UL << SCB_CCR_IC_Pos) /*!< SCB CCR: IC Mask */ - -#define SCB_CCR_DC_Pos 16U /*!< SCB CCR: DC Position */ -#define SCB_CCR_DC_Msk (1UL << SCB_CCR_DC_Pos) /*!< SCB CCR: DC Mask */ - -#define SCB_CCR_STKOFHFNMIGN_Pos 10U /*!< SCB CCR: STKOFHFNMIGN Position */ -#define SCB_CCR_STKOFHFNMIGN_Msk (1UL << SCB_CCR_STKOFHFNMIGN_Pos) /*!< SCB CCR: STKOFHFNMIGN Mask */ - -#define SCB_CCR_BFHFNMIGN_Pos 8U /*!< SCB CCR: BFHFNMIGN Position */ -#define SCB_CCR_BFHFNMIGN_Msk (1UL << SCB_CCR_BFHFNMIGN_Pos) /*!< SCB CCR: BFHFNMIGN Mask */ - -#define SCB_CCR_DIV_0_TRP_Pos 4U /*!< SCB CCR: DIV_0_TRP Position */ -#define SCB_CCR_DIV_0_TRP_Msk (1UL << SCB_CCR_DIV_0_TRP_Pos) /*!< SCB CCR: DIV_0_TRP Mask */ - -#define SCB_CCR_UNALIGN_TRP_Pos 3U /*!< SCB CCR: UNALIGN_TRP Position */ -#define SCB_CCR_UNALIGN_TRP_Msk (1UL << SCB_CCR_UNALIGN_TRP_Pos) /*!< SCB CCR: UNALIGN_TRP Mask */ - -#define SCB_CCR_USERSETMPEND_Pos 1U /*!< SCB CCR: USERSETMPEND Position */ -#define SCB_CCR_USERSETMPEND_Msk (1UL << SCB_CCR_USERSETMPEND_Pos) /*!< SCB CCR: USERSETMPEND Mask */ - -/* SCB System Handler Control and State Register Definitions */ -#define SCB_SHCSR_HARDFAULTPENDED_Pos 21U /*!< SCB SHCSR: HARDFAULTPENDED Position */ -#define SCB_SHCSR_HARDFAULTPENDED_Msk (1UL << SCB_SHCSR_HARDFAULTPENDED_Pos) /*!< SCB SHCSR: HARDFAULTPENDED Mask */ - -#define SCB_SHCSR_SVCALLPENDED_Pos 15U /*!< SCB SHCSR: SVCALLPENDED Position */ -#define SCB_SHCSR_SVCALLPENDED_Msk (1UL << SCB_SHCSR_SVCALLPENDED_Pos) /*!< SCB SHCSR: SVCALLPENDED Mask */ - -#define SCB_SHCSR_SYSTICKACT_Pos 11U /*!< SCB SHCSR: SYSTICKACT Position */ -#define SCB_SHCSR_SYSTICKACT_Msk (1UL << SCB_SHCSR_SYSTICKACT_Pos) /*!< SCB SHCSR: SYSTICKACT Mask */ - -#define SCB_SHCSR_PENDSVACT_Pos 10U /*!< SCB SHCSR: PENDSVACT Position */ -#define SCB_SHCSR_PENDSVACT_Msk (1UL << SCB_SHCSR_PENDSVACT_Pos) /*!< SCB SHCSR: PENDSVACT Mask */ - -#define SCB_SHCSR_SVCALLACT_Pos 7U /*!< SCB SHCSR: SVCALLACT Position */ -#define SCB_SHCSR_SVCALLACT_Msk (1UL << SCB_SHCSR_SVCALLACT_Pos) /*!< SCB SHCSR: SVCALLACT Mask */ - -#define SCB_SHCSR_NMIACT_Pos 5U /*!< SCB SHCSR: NMIACT Position */ -#define SCB_SHCSR_NMIACT_Msk (1UL << SCB_SHCSR_NMIACT_Pos) /*!< SCB SHCSR: NMIACT Mask */ - -#define SCB_SHCSR_HARDFAULTACT_Pos 2U /*!< SCB SHCSR: HARDFAULTACT Position */ -#define SCB_SHCSR_HARDFAULTACT_Msk (1UL << SCB_SHCSR_HARDFAULTACT_Pos) /*!< SCB SHCSR: HARDFAULTACT Mask */ - -/*@} end of group CMSIS_SCB */ - - -/** - \ingroup CMSIS_core_register - \defgroup CMSIS_SysTick System Tick Timer (SysTick) - \brief Type definitions for the System Timer Registers. - @{ - */ - -/** - \brief Structure type to access the System Timer (SysTick). - */ -typedef struct -{ - __IOM uint32_t CTRL; /*!< Offset: 0x000 (R/W) SysTick Control and Status Register */ - __IOM uint32_t LOAD; /*!< Offset: 0x004 (R/W) SysTick Reload Value Register */ - __IOM uint32_t VAL; /*!< Offset: 0x008 (R/W) SysTick Current Value Register */ - __IM uint32_t CALIB; /*!< Offset: 0x00C (R/ ) SysTick Calibration Register */ -} SysTick_Type; - -/* SysTick Control / Status Register Definitions */ -#define SysTick_CTRL_COUNTFLAG_Pos 16U /*!< SysTick CTRL: COUNTFLAG Position */ -#define SysTick_CTRL_COUNTFLAG_Msk (1UL << SysTick_CTRL_COUNTFLAG_Pos) /*!< SysTick CTRL: COUNTFLAG Mask */ - -#define SysTick_CTRL_CLKSOURCE_Pos 2U /*!< SysTick CTRL: CLKSOURCE Position */ -#define SysTick_CTRL_CLKSOURCE_Msk (1UL << SysTick_CTRL_CLKSOURCE_Pos) /*!< SysTick CTRL: CLKSOURCE Mask */ - -#define SysTick_CTRL_TICKINT_Pos 1U /*!< SysTick CTRL: TICKINT Position */ -#define SysTick_CTRL_TICKINT_Msk (1UL << SysTick_CTRL_TICKINT_Pos) /*!< SysTick CTRL: TICKINT Mask */ - -#define SysTick_CTRL_ENABLE_Pos 0U /*!< SysTick CTRL: ENABLE Position */ -#define SysTick_CTRL_ENABLE_Msk (1UL /*<< SysTick_CTRL_ENABLE_Pos*/) /*!< SysTick CTRL: ENABLE Mask */ - -/* SysTick Reload Register Definitions */ -#define SysTick_LOAD_RELOAD_Pos 0U /*!< SysTick LOAD: RELOAD Position */ -#define SysTick_LOAD_RELOAD_Msk (0xFFFFFFUL /*<< SysTick_LOAD_RELOAD_Pos*/) /*!< SysTick LOAD: RELOAD Mask */ - -/* SysTick Current Register Definitions */ -#define SysTick_VAL_CURRENT_Pos 0U /*!< SysTick VAL: CURRENT Position */ -#define SysTick_VAL_CURRENT_Msk (0xFFFFFFUL /*<< SysTick_VAL_CURRENT_Pos*/) /*!< SysTick VAL: CURRENT Mask */ - -/* SysTick Calibration Register Definitions */ -#define SysTick_CALIB_NOREF_Pos 31U /*!< SysTick CALIB: NOREF Position */ -#define SysTick_CALIB_NOREF_Msk (1UL << SysTick_CALIB_NOREF_Pos) /*!< SysTick CALIB: NOREF Mask */ - -#define SysTick_CALIB_SKEW_Pos 30U /*!< SysTick CALIB: SKEW Position */ -#define SysTick_CALIB_SKEW_Msk (1UL << SysTick_CALIB_SKEW_Pos) /*!< SysTick CALIB: SKEW Mask */ - -#define SysTick_CALIB_TENMS_Pos 0U /*!< SysTick CALIB: TENMS Position */ -#define SysTick_CALIB_TENMS_Msk (0xFFFFFFUL /*<< SysTick_CALIB_TENMS_Pos*/) /*!< SysTick CALIB: TENMS Mask */ - -/*@} end of group CMSIS_SysTick */ - - -/** - \ingroup CMSIS_core_register - \defgroup CMSIS_DWT Data Watchpoint and Trace (DWT) - \brief Type definitions for the Data Watchpoint and Trace (DWT) - @{ - */ - -/** - \brief Structure type to access the Data Watchpoint and Trace Register (DWT). - */ -typedef struct -{ - __IOM uint32_t CTRL; /*!< Offset: 0x000 (R/W) Control Register */ - uint32_t RESERVED0[6U]; - __IM uint32_t PCSR; /*!< Offset: 0x01C (R/ ) Program Counter Sample Register */ - __IOM uint32_t COMP0; /*!< Offset: 0x020 (R/W) Comparator Register 0 */ - uint32_t RESERVED1[1U]; - __IOM uint32_t FUNCTION0; /*!< Offset: 0x028 (R/W) Function Register 0 */ - uint32_t RESERVED2[1U]; - __IOM uint32_t COMP1; /*!< Offset: 0x030 (R/W) Comparator Register 1 */ - uint32_t RESERVED3[1U]; - __IOM uint32_t FUNCTION1; /*!< Offset: 0x038 (R/W) Function Register 1 */ - uint32_t RESERVED4[1U]; - __IOM uint32_t COMP2; /*!< Offset: 0x040 (R/W) Comparator Register 2 */ - uint32_t RESERVED5[1U]; - __IOM uint32_t FUNCTION2; /*!< Offset: 0x048 (R/W) Function Register 2 */ - uint32_t RESERVED6[1U]; - __IOM uint32_t COMP3; /*!< Offset: 0x050 (R/W) Comparator Register 3 */ - uint32_t RESERVED7[1U]; - __IOM uint32_t FUNCTION3; /*!< Offset: 0x058 (R/W) Function Register 3 */ - uint32_t RESERVED8[1U]; - __IOM uint32_t COMP4; /*!< Offset: 0x060 (R/W) Comparator Register 4 */ - uint32_t RESERVED9[1U]; - __IOM uint32_t FUNCTION4; /*!< Offset: 0x068 (R/W) Function Register 4 */ - uint32_t RESERVED10[1U]; - __IOM uint32_t COMP5; /*!< Offset: 0x070 (R/W) Comparator Register 5 */ - uint32_t RESERVED11[1U]; - __IOM uint32_t FUNCTION5; /*!< Offset: 0x078 (R/W) Function Register 5 */ - uint32_t RESERVED12[1U]; - __IOM uint32_t COMP6; /*!< Offset: 0x080 (R/W) Comparator Register 6 */ - uint32_t RESERVED13[1U]; - __IOM uint32_t FUNCTION6; /*!< Offset: 0x088 (R/W) Function Register 6 */ - uint32_t RESERVED14[1U]; - __IOM uint32_t COMP7; /*!< Offset: 0x090 (R/W) Comparator Register 7 */ - uint32_t RESERVED15[1U]; - __IOM uint32_t FUNCTION7; /*!< Offset: 0x098 (R/W) Function Register 7 */ - uint32_t RESERVED16[1U]; - __IOM uint32_t COMP8; /*!< Offset: 0x0A0 (R/W) Comparator Register 8 */ - uint32_t RESERVED17[1U]; - __IOM uint32_t FUNCTION8; /*!< Offset: 0x0A8 (R/W) Function Register 8 */ - uint32_t RESERVED18[1U]; - __IOM uint32_t COMP9; /*!< Offset: 0x0B0 (R/W) Comparator Register 9 */ - uint32_t RESERVED19[1U]; - __IOM uint32_t FUNCTION9; /*!< Offset: 0x0B8 (R/W) Function Register 9 */ - uint32_t RESERVED20[1U]; - __IOM uint32_t COMP10; /*!< Offset: 0x0C0 (R/W) Comparator Register 10 */ - uint32_t RESERVED21[1U]; - __IOM uint32_t FUNCTION10; /*!< Offset: 0x0C8 (R/W) Function Register 10 */ - uint32_t RESERVED22[1U]; - __IOM uint32_t COMP11; /*!< Offset: 0x0D0 (R/W) Comparator Register 11 */ - uint32_t RESERVED23[1U]; - __IOM uint32_t FUNCTION11; /*!< Offset: 0x0D8 (R/W) Function Register 11 */ - uint32_t RESERVED24[1U]; - __IOM uint32_t COMP12; /*!< Offset: 0x0E0 (R/W) Comparator Register 12 */ - uint32_t RESERVED25[1U]; - __IOM uint32_t FUNCTION12; /*!< Offset: 0x0E8 (R/W) Function Register 12 */ - uint32_t RESERVED26[1U]; - __IOM uint32_t COMP13; /*!< Offset: 0x0F0 (R/W) Comparator Register 13 */ - uint32_t RESERVED27[1U]; - __IOM uint32_t FUNCTION13; /*!< Offset: 0x0F8 (R/W) Function Register 13 */ - uint32_t RESERVED28[1U]; - __IOM uint32_t COMP14; /*!< Offset: 0x100 (R/W) Comparator Register 14 */ - uint32_t RESERVED29[1U]; - __IOM uint32_t FUNCTION14; /*!< Offset: 0x108 (R/W) Function Register 14 */ - uint32_t RESERVED30[1U]; - __IOM uint32_t COMP15; /*!< Offset: 0x110 (R/W) Comparator Register 15 */ - uint32_t RESERVED31[1U]; - __IOM uint32_t FUNCTION15; /*!< Offset: 0x118 (R/W) Function Register 15 */ -} DWT_Type; - -/* DWT Control Register Definitions */ -#define DWT_CTRL_NUMCOMP_Pos 28U /*!< DWT CTRL: NUMCOMP Position */ -#define DWT_CTRL_NUMCOMP_Msk (0xFUL << DWT_CTRL_NUMCOMP_Pos) /*!< DWT CTRL: NUMCOMP Mask */ - -#define DWT_CTRL_NOTRCPKT_Pos 27U /*!< DWT CTRL: NOTRCPKT Position */ -#define DWT_CTRL_NOTRCPKT_Msk (0x1UL << DWT_CTRL_NOTRCPKT_Pos) /*!< DWT CTRL: NOTRCPKT Mask */ - -#define DWT_CTRL_NOEXTTRIG_Pos 26U /*!< DWT CTRL: NOEXTTRIG Position */ -#define DWT_CTRL_NOEXTTRIG_Msk (0x1UL << DWT_CTRL_NOEXTTRIG_Pos) /*!< DWT CTRL: NOEXTTRIG Mask */ - -#define DWT_CTRL_NOCYCCNT_Pos 25U /*!< DWT CTRL: NOCYCCNT Position */ -#define DWT_CTRL_NOCYCCNT_Msk (0x1UL << DWT_CTRL_NOCYCCNT_Pos) /*!< DWT CTRL: NOCYCCNT Mask */ - -#define DWT_CTRL_NOPRFCNT_Pos 24U /*!< DWT CTRL: NOPRFCNT Position */ -#define DWT_CTRL_NOPRFCNT_Msk (0x1UL << DWT_CTRL_NOPRFCNT_Pos) /*!< DWT CTRL: NOPRFCNT Mask */ - -/* DWT Comparator Function Register Definitions */ -#define DWT_FUNCTION_ID_Pos 27U /*!< DWT FUNCTION: ID Position */ -#define DWT_FUNCTION_ID_Msk (0x1FUL << DWT_FUNCTION_ID_Pos) /*!< DWT FUNCTION: ID Mask */ - -#define DWT_FUNCTION_MATCHED_Pos 24U /*!< DWT FUNCTION: MATCHED Position */ -#define DWT_FUNCTION_MATCHED_Msk (0x1UL << DWT_FUNCTION_MATCHED_Pos) /*!< DWT FUNCTION: MATCHED Mask */ - -#define DWT_FUNCTION_DATAVSIZE_Pos 10U /*!< DWT FUNCTION: DATAVSIZE Position */ -#define DWT_FUNCTION_DATAVSIZE_Msk (0x3UL << DWT_FUNCTION_DATAVSIZE_Pos) /*!< DWT FUNCTION: DATAVSIZE Mask */ - -#define DWT_FUNCTION_ACTION_Pos 4U /*!< DWT FUNCTION: ACTION Position */ -#define DWT_FUNCTION_ACTION_Msk (0x3UL << DWT_FUNCTION_ACTION_Pos) /*!< DWT FUNCTION: ACTION Mask */ - -#define DWT_FUNCTION_MATCH_Pos 0U /*!< DWT FUNCTION: MATCH Position */ -#define DWT_FUNCTION_MATCH_Msk (0xFUL /*<< DWT_FUNCTION_MATCH_Pos*/) /*!< DWT FUNCTION: MATCH Mask */ - -/*@}*/ /* end of group CMSIS_DWT */ - - -/** - \ingroup CMSIS_core_register - \defgroup CMSIS_TPI Trace Port Interface (TPI) - \brief Type definitions for the Trace Port Interface (TPI) - @{ - */ - -/** - \brief Structure type to access the Trace Port Interface Register (TPI). - */ -typedef struct -{ - __IM uint32_t SSPSR; /*!< Offset: 0x000 (R/ ) Supported Parallel Port Sizes Register */ - __IOM uint32_t CSPSR; /*!< Offset: 0x004 (R/W) Current Parallel Port Sizes Register */ - uint32_t RESERVED0[2U]; - __IOM uint32_t ACPR; /*!< Offset: 0x010 (R/W) Asynchronous Clock Prescaler Register */ - uint32_t RESERVED1[55U]; - __IOM uint32_t SPPR; /*!< Offset: 0x0F0 (R/W) Selected Pin Protocol Register */ - uint32_t RESERVED2[131U]; - __IM uint32_t FFSR; /*!< Offset: 0x300 (R/ ) Formatter and Flush Status Register */ - __IOM uint32_t FFCR; /*!< Offset: 0x304 (R/W) Formatter and Flush Control Register */ - __IOM uint32_t PSCR; /*!< Offset: 0x308 (R/W) Periodic Synchronization Control Register */ - uint32_t RESERVED3[809U]; - __OM uint32_t LAR; /*!< Offset: 0xFB0 ( /W) Software Lock Access Register */ - __IM uint32_t LSR; /*!< Offset: 0xFB4 (R/ ) Software Lock Status Register */ - uint32_t RESERVED4[4U]; - __IM uint32_t TYPE; /*!< Offset: 0xFC8 (R/ ) Device Identifier Register */ - __IM uint32_t DEVTYPE; /*!< Offset: 0xFCC (R/ ) Device Type Register */ -} TPI_Type; - -/* TPI Asynchronous Clock Prescaler Register Definitions */ -#define TPI_ACPR_SWOSCALER_Pos 0U /*!< TPI ACPR: SWOSCALER Position */ -#define TPI_ACPR_SWOSCALER_Msk (0xFFFFUL /*<< TPI_ACPR_SWOSCALER_Pos*/) /*!< TPI ACPR: SWOSCALER Mask */ - -/* TPI Selected Pin Protocol Register Definitions */ -#define TPI_SPPR_TXMODE_Pos 0U /*!< TPI SPPR: TXMODE Position */ -#define TPI_SPPR_TXMODE_Msk (0x3UL /*<< TPI_SPPR_TXMODE_Pos*/) /*!< TPI SPPR: TXMODE Mask */ - -/* TPI Formatter and Flush Status Register Definitions */ -#define TPI_FFSR_FtNonStop_Pos 3U /*!< TPI FFSR: FtNonStop Position */ -#define TPI_FFSR_FtNonStop_Msk (0x1UL << TPI_FFSR_FtNonStop_Pos) /*!< TPI FFSR: FtNonStop Mask */ - -#define TPI_FFSR_TCPresent_Pos 2U /*!< TPI FFSR: TCPresent Position */ -#define TPI_FFSR_TCPresent_Msk (0x1UL << TPI_FFSR_TCPresent_Pos) /*!< TPI FFSR: TCPresent Mask */ - -#define TPI_FFSR_FtStopped_Pos 1U /*!< TPI FFSR: FtStopped Position */ -#define TPI_FFSR_FtStopped_Msk (0x1UL << TPI_FFSR_FtStopped_Pos) /*!< TPI FFSR: FtStopped Mask */ - -#define TPI_FFSR_FlInProg_Pos 0U /*!< TPI FFSR: FlInProg Position */ -#define TPI_FFSR_FlInProg_Msk (0x1UL /*<< TPI_FFSR_FlInProg_Pos*/) /*!< TPI FFSR: FlInProg Mask */ - -/* TPI Formatter and Flush Control Register Definitions */ -#define TPI_FFCR_TrigIn_Pos 8U /*!< TPI FFCR: TrigIn Position */ -#define TPI_FFCR_TrigIn_Msk (0x1UL << TPI_FFCR_TrigIn_Pos) /*!< TPI FFCR: TrigIn Mask */ - -#define TPI_FFCR_FOnMan_Pos 6U /*!< TPI FFCR: FOnMan Position */ -#define TPI_FFCR_FOnMan_Msk (0x1UL << TPI_FFCR_FOnMan_Pos) /*!< TPI FFCR: FOnMan Mask */ - -#define TPI_FFCR_EnFCont_Pos 1U /*!< TPI FFCR: EnFCont Position */ -#define TPI_FFCR_EnFCont_Msk (0x1UL << TPI_FFCR_EnFCont_Pos) /*!< TPI FFCR: EnFCont Mask */ - -/* TPI Periodic Synchronization Control Register Definitions */ -#define TPI_PSCR_PSCount_Pos 0U /*!< TPI PSCR: PSCount Position */ -#define TPI_PSCR_PSCount_Msk (0x1FUL /*<< TPI_PSCR_PSCount_Pos*/) /*!< TPI PSCR: TPSCount Mask */ - -/* TPI Software Lock Status Register Definitions */ -#define TPI_LSR_nTT_Pos 1U /*!< TPI LSR: Not thirty-two bit. Position */ -#define TPI_LSR_nTT_Msk (0x1UL << TPI_LSR_nTT_Pos) /*!< TPI LSR: Not thirty-two bit. Mask */ - -#define TPI_LSR_SLK_Pos 1U /*!< TPI LSR: Software Lock status Position */ -#define TPI_LSR_SLK_Msk (0x1UL << TPI_LSR_SLK_Pos) /*!< TPI LSR: Software Lock status Mask */ - -#define TPI_LSR_SLI_Pos 0U /*!< TPI LSR: Software Lock implemented Position */ -#define TPI_LSR_SLI_Msk (0x1UL /*<< TPI_LSR_SLI_Pos*/) /*!< TPI LSR: Software Lock implemented Mask */ - -/* TPI DEVID Register Definitions */ -#define TPI_DEVID_NRZVALID_Pos 11U /*!< TPI DEVID: NRZVALID Position */ -#define TPI_DEVID_NRZVALID_Msk (0x1UL << TPI_DEVID_NRZVALID_Pos) /*!< TPI DEVID: NRZVALID Mask */ - -#define TPI_DEVID_MANCVALID_Pos 10U /*!< TPI DEVID: MANCVALID Position */ -#define TPI_DEVID_MANCVALID_Msk (0x1UL << TPI_DEVID_MANCVALID_Pos) /*!< TPI DEVID: MANCVALID Mask */ - -#define TPI_DEVID_PTINVALID_Pos 9U /*!< TPI DEVID: PTINVALID Position */ -#define TPI_DEVID_PTINVALID_Msk (0x1UL << TPI_DEVID_PTINVALID_Pos) /*!< TPI DEVID: PTINVALID Mask */ - -#define TPI_DEVID_FIFOSZ_Pos 6U /*!< TPI DEVID: FIFO depth Position */ -#define TPI_DEVID_FIFOSZ_Msk (0x7UL << TPI_DEVID_FIFOSZ_Pos) /*!< TPI DEVID: FIFO depth Mask */ - -/* TPI DEVTYPE Register Definitions */ -#define TPI_DEVTYPE_SubType_Pos 4U /*!< TPI DEVTYPE: SubType Position */ -#define TPI_DEVTYPE_SubType_Msk (0xFUL /*<< TPI_DEVTYPE_SubType_Pos*/) /*!< TPI DEVTYPE: SubType Mask */ - -#define TPI_DEVTYPE_MajorType_Pos 0U /*!< TPI DEVTYPE: MajorType Position */ -#define TPI_DEVTYPE_MajorType_Msk (0xFUL << TPI_DEVTYPE_MajorType_Pos) /*!< TPI DEVTYPE: MajorType Mask */ - -/*@}*/ /* end of group CMSIS_TPI */ - - -#if defined (__MPU_PRESENT) && (__MPU_PRESENT == 1U) -/** - \ingroup CMSIS_core_register - \defgroup CMSIS_MPU Memory Protection Unit (MPU) - \brief Type definitions for the Memory Protection Unit (MPU) - @{ - */ - -/** - \brief Structure type to access the Memory Protection Unit (MPU). - */ -typedef struct -{ - __IM uint32_t TYPE; /*!< Offset: 0x000 (R/ ) MPU Type Register */ - __IOM uint32_t CTRL; /*!< Offset: 0x004 (R/W) MPU Control Register */ - __IOM uint32_t RNR; /*!< Offset: 0x008 (R/W) MPU Region Number Register */ - __IOM uint32_t RBAR; /*!< Offset: 0x00C (R/W) MPU Region Base Address Register */ - __IOM uint32_t RLAR; /*!< Offset: 0x010 (R/W) MPU Region Limit Address Register */ - uint32_t RESERVED0[7U]; - union { - __IOM uint32_t MAIR[2]; - struct { - __IOM uint32_t MAIR0; /*!< Offset: 0x030 (R/W) MPU Memory Attribute Indirection Register 0 */ - __IOM uint32_t MAIR1; /*!< Offset: 0x034 (R/W) MPU Memory Attribute Indirection Register 1 */ - }; - }; -} MPU_Type; - -#define MPU_TYPE_RALIASES 1U - -/* MPU Type Register Definitions */ -#define MPU_TYPE_IREGION_Pos 16U /*!< MPU TYPE: IREGION Position */ -#define MPU_TYPE_IREGION_Msk (0xFFUL << MPU_TYPE_IREGION_Pos) /*!< MPU TYPE: IREGION Mask */ - -#define MPU_TYPE_DREGION_Pos 8U /*!< MPU TYPE: DREGION Position */ -#define MPU_TYPE_DREGION_Msk (0xFFUL << MPU_TYPE_DREGION_Pos) /*!< MPU TYPE: DREGION Mask */ - -#define MPU_TYPE_SEPARATE_Pos 0U /*!< MPU TYPE: SEPARATE Position */ -#define MPU_TYPE_SEPARATE_Msk (1UL /*<< MPU_TYPE_SEPARATE_Pos*/) /*!< MPU TYPE: SEPARATE Mask */ - -/* MPU Control Register Definitions */ -#define MPU_CTRL_PRIVDEFENA_Pos 2U /*!< MPU CTRL: PRIVDEFENA Position */ -#define MPU_CTRL_PRIVDEFENA_Msk (1UL << MPU_CTRL_PRIVDEFENA_Pos) /*!< MPU CTRL: PRIVDEFENA Mask */ - -#define MPU_CTRL_HFNMIENA_Pos 1U /*!< MPU CTRL: HFNMIENA Position */ -#define MPU_CTRL_HFNMIENA_Msk (1UL << MPU_CTRL_HFNMIENA_Pos) /*!< MPU CTRL: HFNMIENA Mask */ - -#define MPU_CTRL_ENABLE_Pos 0U /*!< MPU CTRL: ENABLE Position */ -#define MPU_CTRL_ENABLE_Msk (1UL /*<< MPU_CTRL_ENABLE_Pos*/) /*!< MPU CTRL: ENABLE Mask */ - -/* MPU Region Number Register Definitions */ -#define MPU_RNR_REGION_Pos 0U /*!< MPU RNR: REGION Position */ -#define MPU_RNR_REGION_Msk (0xFFUL /*<< MPU_RNR_REGION_Pos*/) /*!< MPU RNR: REGION Mask */ - -/* MPU Region Base Address Register Definitions */ -#define MPU_RBAR_BASE_Pos 5U /*!< MPU RBAR: BASE Position */ -#define MPU_RBAR_BASE_Msk (0x7FFFFFFUL << MPU_RBAR_BASE_Pos) /*!< MPU RBAR: BASE Mask */ - -#define MPU_RBAR_SH_Pos 3U /*!< MPU RBAR: SH Position */ -#define MPU_RBAR_SH_Msk (0x3UL << MPU_RBAR_SH_Pos) /*!< MPU RBAR: SH Mask */ - -#define MPU_RBAR_AP_Pos 1U /*!< MPU RBAR: AP Position */ -#define MPU_RBAR_AP_Msk (0x3UL << MPU_RBAR_AP_Pos) /*!< MPU RBAR: AP Mask */ - -#define MPU_RBAR_XN_Pos 0U /*!< MPU RBAR: XN Position */ -#define MPU_RBAR_XN_Msk (01UL /*<< MPU_RBAR_XN_Pos*/) /*!< MPU RBAR: XN Mask */ - -/* MPU Region Limit Address Register Definitions */ -#define MPU_RLAR_LIMIT_Pos 5U /*!< MPU RLAR: LIMIT Position */ -#define MPU_RLAR_LIMIT_Msk (0x7FFFFFFUL << MPU_RLAR_LIMIT_Pos) /*!< MPU RLAR: LIMIT Mask */ - -#define MPU_RLAR_AttrIndx_Pos 1U /*!< MPU RLAR: AttrIndx Position */ -#define MPU_RLAR_AttrIndx_Msk (0x7UL << MPU_RLAR_AttrIndx_Pos) /*!< MPU RLAR: AttrIndx Mask */ - -#define MPU_RLAR_EN_Pos 0U /*!< MPU RLAR: EN Position */ -#define MPU_RLAR_EN_Msk (1UL /*<< MPU_RLAR_EN_Pos*/) /*!< MPU RLAR: EN Mask */ - -/* MPU Memory Attribute Indirection Register 0 Definitions */ -#define MPU_MAIR0_Attr3_Pos 24U /*!< MPU MAIR0: Attr3 Position */ -#define MPU_MAIR0_Attr3_Msk (0xFFUL << MPU_MAIR0_Attr3_Pos) /*!< MPU MAIR0: Attr3 Mask */ - -#define MPU_MAIR0_Attr2_Pos 16U /*!< MPU MAIR0: Attr2 Position */ -#define MPU_MAIR0_Attr2_Msk (0xFFUL << MPU_MAIR0_Attr2_Pos) /*!< MPU MAIR0: Attr2 Mask */ - -#define MPU_MAIR0_Attr1_Pos 8U /*!< MPU MAIR0: Attr1 Position */ -#define MPU_MAIR0_Attr1_Msk (0xFFUL << MPU_MAIR0_Attr1_Pos) /*!< MPU MAIR0: Attr1 Mask */ - -#define MPU_MAIR0_Attr0_Pos 0U /*!< MPU MAIR0: Attr0 Position */ -#define MPU_MAIR0_Attr0_Msk (0xFFUL /*<< MPU_MAIR0_Attr0_Pos*/) /*!< MPU MAIR0: Attr0 Mask */ - -/* MPU Memory Attribute Indirection Register 1 Definitions */ -#define MPU_MAIR1_Attr7_Pos 24U /*!< MPU MAIR1: Attr7 Position */ -#define MPU_MAIR1_Attr7_Msk (0xFFUL << MPU_MAIR1_Attr7_Pos) /*!< MPU MAIR1: Attr7 Mask */ - -#define MPU_MAIR1_Attr6_Pos 16U /*!< MPU MAIR1: Attr6 Position */ -#define MPU_MAIR1_Attr6_Msk (0xFFUL << MPU_MAIR1_Attr6_Pos) /*!< MPU MAIR1: Attr6 Mask */ - -#define MPU_MAIR1_Attr5_Pos 8U /*!< MPU MAIR1: Attr5 Position */ -#define MPU_MAIR1_Attr5_Msk (0xFFUL << MPU_MAIR1_Attr5_Pos) /*!< MPU MAIR1: Attr5 Mask */ - -#define MPU_MAIR1_Attr4_Pos 0U /*!< MPU MAIR1: Attr4 Position */ -#define MPU_MAIR1_Attr4_Msk (0xFFUL /*<< MPU_MAIR1_Attr4_Pos*/) /*!< MPU MAIR1: Attr4 Mask */ - -/*@} end of group CMSIS_MPU */ -#endif - - -#if defined (__ARM_FEATURE_CMSE) && (__ARM_FEATURE_CMSE == 3U) -/** - \ingroup CMSIS_core_register - \defgroup CMSIS_SAU Security Attribution Unit (SAU) - \brief Type definitions for the Security Attribution Unit (SAU) - @{ - */ - -/** - \brief Structure type to access the Security Attribution Unit (SAU). - */ -typedef struct -{ - __IOM uint32_t CTRL; /*!< Offset: 0x000 (R/W) SAU Control Register */ - __IM uint32_t TYPE; /*!< Offset: 0x004 (R/ ) SAU Type Register */ -#if defined (__SAUREGION_PRESENT) && (__SAUREGION_PRESENT == 1U) - __IOM uint32_t RNR; /*!< Offset: 0x008 (R/W) SAU Region Number Register */ - __IOM uint32_t RBAR; /*!< Offset: 0x00C (R/W) SAU Region Base Address Register */ - __IOM uint32_t RLAR; /*!< Offset: 0x010 (R/W) SAU Region Limit Address Register */ -#endif -} SAU_Type; - -/* SAU Control Register Definitions */ -#define SAU_CTRL_ALLNS_Pos 1U /*!< SAU CTRL: ALLNS Position */ -#define SAU_CTRL_ALLNS_Msk (1UL << SAU_CTRL_ALLNS_Pos) /*!< SAU CTRL: ALLNS Mask */ - -#define SAU_CTRL_ENABLE_Pos 0U /*!< SAU CTRL: ENABLE Position */ -#define SAU_CTRL_ENABLE_Msk (1UL /*<< SAU_CTRL_ENABLE_Pos*/) /*!< SAU CTRL: ENABLE Mask */ - -/* SAU Type Register Definitions */ -#define SAU_TYPE_SREGION_Pos 0U /*!< SAU TYPE: SREGION Position */ -#define SAU_TYPE_SREGION_Msk (0xFFUL /*<< SAU_TYPE_SREGION_Pos*/) /*!< SAU TYPE: SREGION Mask */ - -#if defined (__SAUREGION_PRESENT) && (__SAUREGION_PRESENT == 1U) -/* SAU Region Number Register Definitions */ -#define SAU_RNR_REGION_Pos 0U /*!< SAU RNR: REGION Position */ -#define SAU_RNR_REGION_Msk (0xFFUL /*<< SAU_RNR_REGION_Pos*/) /*!< SAU RNR: REGION Mask */ - -/* SAU Region Base Address Register Definitions */ -#define SAU_RBAR_BADDR_Pos 5U /*!< SAU RBAR: BADDR Position */ -#define SAU_RBAR_BADDR_Msk (0x7FFFFFFUL << SAU_RBAR_BADDR_Pos) /*!< SAU RBAR: BADDR Mask */ - -/* SAU Region Limit Address Register Definitions */ -#define SAU_RLAR_LADDR_Pos 5U /*!< SAU RLAR: LADDR Position */ -#define SAU_RLAR_LADDR_Msk (0x7FFFFFFUL << SAU_RLAR_LADDR_Pos) /*!< SAU RLAR: LADDR Mask */ - -#define SAU_RLAR_NSC_Pos 1U /*!< SAU RLAR: NSC Position */ -#define SAU_RLAR_NSC_Msk (1UL << SAU_RLAR_NSC_Pos) /*!< SAU RLAR: NSC Mask */ - -#define SAU_RLAR_ENABLE_Pos 0U /*!< SAU RLAR: ENABLE Position */ -#define SAU_RLAR_ENABLE_Msk (1UL /*<< SAU_RLAR_ENABLE_Pos*/) /*!< SAU RLAR: ENABLE Mask */ - -#endif /* defined (__SAUREGION_PRESENT) && (__SAUREGION_PRESENT == 1U) */ - -/*@} end of group CMSIS_SAU */ -#endif /* defined (__ARM_FEATURE_CMSE) && (__ARM_FEATURE_CMSE == 3U) */ - - -/** - \ingroup CMSIS_core_register - \defgroup CMSIS_CoreDebug Core Debug Registers (CoreDebug) - \brief Type definitions for the Core Debug Registers - @{ - */ - -/** - \brief Structure type to access the Core Debug Register (CoreDebug). - */ -typedef struct -{ - __IOM uint32_t DHCSR; /*!< Offset: 0x000 (R/W) Debug Halting Control and Status Register */ - __OM uint32_t DCRSR; /*!< Offset: 0x004 ( /W) Debug Core Register Selector Register */ - __IOM uint32_t DCRDR; /*!< Offset: 0x008 (R/W) Debug Core Register Data Register */ - __IOM uint32_t DEMCR; /*!< Offset: 0x00C (R/W) Debug Exception and Monitor Control Register */ - uint32_t RESERVED4[1U]; - __IOM uint32_t DAUTHCTRL; /*!< Offset: 0x014 (R/W) Debug Authentication Control Register */ - __IOM uint32_t DSCSR; /*!< Offset: 0x018 (R/W) Debug Security Control and Status Register */ -} CoreDebug_Type; - -/* Debug Halting Control and Status Register Definitions */ -#define CoreDebug_DHCSR_DBGKEY_Pos 16U /*!< CoreDebug DHCSR: DBGKEY Position */ -#define CoreDebug_DHCSR_DBGKEY_Msk (0xFFFFUL << CoreDebug_DHCSR_DBGKEY_Pos) /*!< CoreDebug DHCSR: DBGKEY Mask */ - -#define CoreDebug_DHCSR_S_RESTART_ST_Pos 26U /*!< CoreDebug DHCSR: S_RESTART_ST Position */ -#define CoreDebug_DHCSR_S_RESTART_ST_Msk (1UL << CoreDebug_DHCSR_S_RESTART_ST_Pos) /*!< CoreDebug DHCSR: S_RESTART_ST Mask */ - -#define CoreDebug_DHCSR_S_RESET_ST_Pos 25U /*!< CoreDebug DHCSR: S_RESET_ST Position */ -#define CoreDebug_DHCSR_S_RESET_ST_Msk (1UL << CoreDebug_DHCSR_S_RESET_ST_Pos) /*!< CoreDebug DHCSR: S_RESET_ST Mask */ - -#define CoreDebug_DHCSR_S_RETIRE_ST_Pos 24U /*!< CoreDebug DHCSR: S_RETIRE_ST Position */ -#define CoreDebug_DHCSR_S_RETIRE_ST_Msk (1UL << CoreDebug_DHCSR_S_RETIRE_ST_Pos) /*!< CoreDebug DHCSR: S_RETIRE_ST Mask */ - -#define CoreDebug_DHCSR_S_LOCKUP_Pos 19U /*!< CoreDebug DHCSR: S_LOCKUP Position */ -#define CoreDebug_DHCSR_S_LOCKUP_Msk (1UL << CoreDebug_DHCSR_S_LOCKUP_Pos) /*!< CoreDebug DHCSR: S_LOCKUP Mask */ - -#define CoreDebug_DHCSR_S_SLEEP_Pos 18U /*!< CoreDebug DHCSR: S_SLEEP Position */ -#define CoreDebug_DHCSR_S_SLEEP_Msk (1UL << CoreDebug_DHCSR_S_SLEEP_Pos) /*!< CoreDebug DHCSR: S_SLEEP Mask */ - -#define CoreDebug_DHCSR_S_HALT_Pos 17U /*!< CoreDebug DHCSR: S_HALT Position */ -#define CoreDebug_DHCSR_S_HALT_Msk (1UL << CoreDebug_DHCSR_S_HALT_Pos) /*!< CoreDebug DHCSR: S_HALT Mask */ - -#define CoreDebug_DHCSR_S_REGRDY_Pos 16U /*!< CoreDebug DHCSR: S_REGRDY Position */ -#define CoreDebug_DHCSR_S_REGRDY_Msk (1UL << CoreDebug_DHCSR_S_REGRDY_Pos) /*!< CoreDebug DHCSR: S_REGRDY Mask */ - -#define CoreDebug_DHCSR_C_MASKINTS_Pos 3U /*!< CoreDebug DHCSR: C_MASKINTS Position */ -#define CoreDebug_DHCSR_C_MASKINTS_Msk (1UL << CoreDebug_DHCSR_C_MASKINTS_Pos) /*!< CoreDebug DHCSR: C_MASKINTS Mask */ - -#define CoreDebug_DHCSR_C_STEP_Pos 2U /*!< CoreDebug DHCSR: C_STEP Position */ -#define CoreDebug_DHCSR_C_STEP_Msk (1UL << CoreDebug_DHCSR_C_STEP_Pos) /*!< CoreDebug DHCSR: C_STEP Mask */ - -#define CoreDebug_DHCSR_C_HALT_Pos 1U /*!< CoreDebug DHCSR: C_HALT Position */ -#define CoreDebug_DHCSR_C_HALT_Msk (1UL << CoreDebug_DHCSR_C_HALT_Pos) /*!< CoreDebug DHCSR: C_HALT Mask */ - -#define CoreDebug_DHCSR_C_DEBUGEN_Pos 0U /*!< CoreDebug DHCSR: C_DEBUGEN Position */ -#define CoreDebug_DHCSR_C_DEBUGEN_Msk (1UL /*<< CoreDebug_DHCSR_C_DEBUGEN_Pos*/) /*!< CoreDebug DHCSR: C_DEBUGEN Mask */ - -/* Debug Core Register Selector Register Definitions */ -#define CoreDebug_DCRSR_REGWnR_Pos 16U /*!< CoreDebug DCRSR: REGWnR Position */ -#define CoreDebug_DCRSR_REGWnR_Msk (1UL << CoreDebug_DCRSR_REGWnR_Pos) /*!< CoreDebug DCRSR: REGWnR Mask */ - -#define CoreDebug_DCRSR_REGSEL_Pos 0U /*!< CoreDebug DCRSR: REGSEL Position */ -#define CoreDebug_DCRSR_REGSEL_Msk (0x1FUL /*<< CoreDebug_DCRSR_REGSEL_Pos*/) /*!< CoreDebug DCRSR: REGSEL Mask */ - -/* Debug Exception and Monitor Control Register */ -#define CoreDebug_DEMCR_DWTENA_Pos 24U /*!< CoreDebug DEMCR: DWTENA Position */ -#define CoreDebug_DEMCR_DWTENA_Msk (1UL << CoreDebug_DEMCR_DWTENA_Pos) /*!< CoreDebug DEMCR: DWTENA Mask */ - -#define CoreDebug_DEMCR_VC_HARDERR_Pos 10U /*!< CoreDebug DEMCR: VC_HARDERR Position */ -#define CoreDebug_DEMCR_VC_HARDERR_Msk (1UL << CoreDebug_DEMCR_VC_HARDERR_Pos) /*!< CoreDebug DEMCR: VC_HARDERR Mask */ - -#define CoreDebug_DEMCR_VC_CORERESET_Pos 0U /*!< CoreDebug DEMCR: VC_CORERESET Position */ -#define CoreDebug_DEMCR_VC_CORERESET_Msk (1UL /*<< CoreDebug_DEMCR_VC_CORERESET_Pos*/) /*!< CoreDebug DEMCR: VC_CORERESET Mask */ - -/* Debug Authentication Control Register Definitions */ -#define CoreDebug_DAUTHCTRL_INTSPNIDEN_Pos 3U /*!< CoreDebug DAUTHCTRL: INTSPNIDEN, Position */ -#define CoreDebug_DAUTHCTRL_INTSPNIDEN_Msk (1UL << CoreDebug_DAUTHCTRL_INTSPNIDEN_Pos) /*!< CoreDebug DAUTHCTRL: INTSPNIDEN, Mask */ - -#define CoreDebug_DAUTHCTRL_SPNIDENSEL_Pos 2U /*!< CoreDebug DAUTHCTRL: SPNIDENSEL Position */ -#define CoreDebug_DAUTHCTRL_SPNIDENSEL_Msk (1UL << CoreDebug_DAUTHCTRL_SPNIDENSEL_Pos) /*!< CoreDebug DAUTHCTRL: SPNIDENSEL Mask */ - -#define CoreDebug_DAUTHCTRL_INTSPIDEN_Pos 1U /*!< CoreDebug DAUTHCTRL: INTSPIDEN Position */ -#define CoreDebug_DAUTHCTRL_INTSPIDEN_Msk (1UL << CoreDebug_DAUTHCTRL_INTSPIDEN_Pos) /*!< CoreDebug DAUTHCTRL: INTSPIDEN Mask */ - -#define CoreDebug_DAUTHCTRL_SPIDENSEL_Pos 0U /*!< CoreDebug DAUTHCTRL: SPIDENSEL Position */ -#define CoreDebug_DAUTHCTRL_SPIDENSEL_Msk (1UL /*<< CoreDebug_DAUTHCTRL_SPIDENSEL_Pos*/) /*!< CoreDebug DAUTHCTRL: SPIDENSEL Mask */ - -/* Debug Security Control and Status Register Definitions */ -#define CoreDebug_DSCSR_CDS_Pos 16U /*!< CoreDebug DSCSR: CDS Position */ -#define CoreDebug_DSCSR_CDS_Msk (1UL << CoreDebug_DSCSR_CDS_Pos) /*!< CoreDebug DSCSR: CDS Mask */ - -#define CoreDebug_DSCSR_SBRSEL_Pos 1U /*!< CoreDebug DSCSR: SBRSEL Position */ -#define CoreDebug_DSCSR_SBRSEL_Msk (1UL << CoreDebug_DSCSR_SBRSEL_Pos) /*!< CoreDebug DSCSR: SBRSEL Mask */ - -#define CoreDebug_DSCSR_SBRSELEN_Pos 0U /*!< CoreDebug DSCSR: SBRSELEN Position */ -#define CoreDebug_DSCSR_SBRSELEN_Msk (1UL /*<< CoreDebug_DSCSR_SBRSELEN_Pos*/) /*!< CoreDebug DSCSR: SBRSELEN Mask */ - -/*@} end of group CMSIS_CoreDebug */ - - -/** - \ingroup CMSIS_core_register - \defgroup CMSIS_core_bitfield Core register bit field macros - \brief Macros for use with bit field definitions (xxx_Pos, xxx_Msk). - @{ - */ - -/** - \brief Mask and shift a bit field value for use in a register bit range. - \param[in] field Name of the register bit field. - \param[in] value Value of the bit field. This parameter is interpreted as an uint32_t type. - \return Masked and shifted value. -*/ -#define _VAL2FLD(field, value) (((uint32_t)(value) << field ## _Pos) & field ## _Msk) - -/** - \brief Mask and shift a register value to extract a bit filed value. - \param[in] field Name of the register bit field. - \param[in] value Value of register. This parameter is interpreted as an uint32_t type. - \return Masked and shifted bit field value. -*/ -#define _FLD2VAL(field, value) (((uint32_t)(value) & field ## _Msk) >> field ## _Pos) - -/*@} end of group CMSIS_core_bitfield */ - - -/** - \ingroup CMSIS_core_register - \defgroup CMSIS_core_base Core Definitions - \brief Definitions for base addresses, unions, and structures. - @{ - */ - -/* Memory mapping of Core Hardware */ - #define SCS_BASE (0xE000E000UL) /*!< System Control Space Base Address */ - #define DWT_BASE (0xE0001000UL) /*!< DWT Base Address */ - #define TPI_BASE (0xE0040000UL) /*!< TPI Base Address */ - #define CoreDebug_BASE (0xE000EDF0UL) /*!< Core Debug Base Address */ - #define SysTick_BASE (SCS_BASE + 0x0010UL) /*!< SysTick Base Address */ - #define NVIC_BASE (SCS_BASE + 0x0100UL) /*!< NVIC Base Address */ - #define SCB_BASE (SCS_BASE + 0x0D00UL) /*!< System Control Block Base Address */ - - - #define SCB ((SCB_Type *) SCB_BASE ) /*!< SCB configuration struct */ - #define SysTick ((SysTick_Type *) SysTick_BASE ) /*!< SysTick configuration struct */ - #define NVIC ((NVIC_Type *) NVIC_BASE ) /*!< NVIC configuration struct */ - #define DWT ((DWT_Type *) DWT_BASE ) /*!< DWT configuration struct */ - #define TPI ((TPI_Type *) TPI_BASE ) /*!< TPI configuration struct */ - #define CoreDebug ((CoreDebug_Type *) CoreDebug_BASE ) /*!< Core Debug configuration struct */ - - #if defined (__MPU_PRESENT) && (__MPU_PRESENT == 1U) - #define MPU_BASE (SCS_BASE + 0x0D90UL) /*!< Memory Protection Unit */ - #define MPU ((MPU_Type *) MPU_BASE ) /*!< Memory Protection Unit */ - #endif - - #if defined (__ARM_FEATURE_CMSE) && (__ARM_FEATURE_CMSE == 3U) - #define SAU_BASE (SCS_BASE + 0x0DD0UL) /*!< Security Attribution Unit */ - #define SAU ((SAU_Type *) SAU_BASE ) /*!< Security Attribution Unit */ - #endif - -#if defined (__ARM_FEATURE_CMSE) && (__ARM_FEATURE_CMSE == 3U) - #define SCS_BASE_NS (0xE002E000UL) /*!< System Control Space Base Address (non-secure address space) */ - #define CoreDebug_BASE_NS (0xE002EDF0UL) /*!< Core Debug Base Address (non-secure address space) */ - #define SysTick_BASE_NS (SCS_BASE_NS + 0x0010UL) /*!< SysTick Base Address (non-secure address space) */ - #define NVIC_BASE_NS (SCS_BASE_NS + 0x0100UL) /*!< NVIC Base Address (non-secure address space) */ - #define SCB_BASE_NS (SCS_BASE_NS + 0x0D00UL) /*!< System Control Block Base Address (non-secure address space) */ - - #define SCB_NS ((SCB_Type *) SCB_BASE_NS ) /*!< SCB configuration struct (non-secure address space) */ - #define SysTick_NS ((SysTick_Type *) SysTick_BASE_NS ) /*!< SysTick configuration struct (non-secure address space) */ - #define NVIC_NS ((NVIC_Type *) NVIC_BASE_NS ) /*!< NVIC configuration struct (non-secure address space) */ - #define CoreDebug_NS ((CoreDebug_Type *) CoreDebug_BASE_NS) /*!< Core Debug configuration struct (non-secure address space) */ - - #if defined (__MPU_PRESENT) && (__MPU_PRESENT == 1U) - #define MPU_BASE_NS (SCS_BASE_NS + 0x0D90UL) /*!< Memory Protection Unit (non-secure address space) */ - #define MPU_NS ((MPU_Type *) MPU_BASE_NS ) /*!< Memory Protection Unit (non-secure address space) */ - #endif - -#endif /* defined (__ARM_FEATURE_CMSE) && (__ARM_FEATURE_CMSE == 3U) */ -/*@} */ - - - -/******************************************************************************* - * Hardware Abstraction Layer - Core Function Interface contains: - - Core NVIC Functions - - Core SysTick Functions - - Core Register Access Functions - ******************************************************************************/ -/** - \defgroup CMSIS_Core_FunctionInterface Functions and Instructions Reference -*/ - - - -/* ########################## NVIC functions #################################### */ -/** - \ingroup CMSIS_Core_FunctionInterface - \defgroup CMSIS_Core_NVICFunctions NVIC Functions - \brief Functions that manage interrupts and exceptions via the NVIC. - @{ - */ - -#ifdef CMSIS_NVIC_VIRTUAL - #ifndef CMSIS_NVIC_VIRTUAL_HEADER_FILE - #define CMSIS_NVIC_VIRTUAL_HEADER_FILE "cmsis_nvic_virtual.h" - #endif - #include CMSIS_NVIC_VIRTUAL_HEADER_FILE -#else - #define NVIC_SetPriorityGrouping __NVIC_SetPriorityGrouping - #define NVIC_GetPriorityGrouping __NVIC_GetPriorityGrouping - #define NVIC_EnableIRQ __NVIC_EnableIRQ - #define NVIC_GetEnableIRQ __NVIC_GetEnableIRQ - #define NVIC_DisableIRQ __NVIC_DisableIRQ - #define NVIC_GetPendingIRQ __NVIC_GetPendingIRQ - #define NVIC_SetPendingIRQ __NVIC_SetPendingIRQ - #define NVIC_ClearPendingIRQ __NVIC_ClearPendingIRQ - #define NVIC_GetActive __NVIC_GetActive - #define NVIC_SetPriority __NVIC_SetPriority - #define NVIC_GetPriority __NVIC_GetPriority - #define NVIC_SystemReset __NVIC_SystemReset -#endif /* CMSIS_NVIC_VIRTUAL */ - -#ifdef CMSIS_VECTAB_VIRTUAL - #ifndef CMSIS_VECTAB_VIRTUAL_HEADER_FILE - #define CMSIS_VECTAB_VIRTUAL_HEADER_FILE "cmsis_vectab_virtual.h" - #endif - #include CMSIS_VECTAB_VIRTUAL_HEADER_FILE -#else - #define NVIC_SetVector __NVIC_SetVector - #define NVIC_GetVector __NVIC_GetVector -#endif /* (CMSIS_VECTAB_VIRTUAL) */ - -#define NVIC_USER_IRQ_OFFSET 16 - - -/* Special LR values for Secure/Non-Secure call handling and exception handling */ - -/* Function Return Payload (from ARMv8-M Architecture Reference Manual) LR value on entry from Secure BLXNS */ -#define FNC_RETURN (0xFEFFFFFFUL) /* bit [0] ignored when processing a branch */ - -/* The following EXC_RETURN mask values are used to evaluate the LR on exception entry */ -#define EXC_RETURN_PREFIX (0xFF000000UL) /* bits [31:24] set to indicate an EXC_RETURN value */ -#define EXC_RETURN_S (0x00000040UL) /* bit [6] stack used to push registers: 0=Non-secure 1=Secure */ -#define EXC_RETURN_DCRS (0x00000020UL) /* bit [5] stacking rules for called registers: 0=skipped 1=saved */ -#define EXC_RETURN_FTYPE (0x00000010UL) /* bit [4] allocate stack for floating-point context: 0=done 1=skipped */ -#define EXC_RETURN_MODE (0x00000008UL) /* bit [3] processor mode for return: 0=Handler mode 1=Thread mode */ -#define EXC_RETURN_SPSEL (0x00000002UL) /* bit [1] stack pointer used to restore context: 0=MSP 1=PSP */ -#define EXC_RETURN_ES (0x00000001UL) /* bit [0] security state exception was taken to: 0=Non-secure 1=Secure */ - -/* Integrity Signature (from ARMv8-M Architecture Reference Manual) for exception context stacking */ -#if defined (__FPU_PRESENT) && (__FPU_PRESENT == 1U) /* Value for processors with floating-point extension: */ -#define EXC_INTEGRITY_SIGNATURE (0xFEFA125AUL) /* bit [0] SFTC must match LR bit[4] EXC_RETURN_FTYPE */ -#else -#define EXC_INTEGRITY_SIGNATURE (0xFEFA125BUL) /* Value for processors without floating-point extension */ -#endif - - -/* Interrupt Priorities are WORD accessible only under Armv6-M */ -/* The following MACROS handle generation of the register offset and byte masks */ -#define _BIT_SHIFT(IRQn) ( ((((uint32_t)(int32_t)(IRQn)) ) & 0x03UL) * 8UL) -#define _SHP_IDX(IRQn) ( (((((uint32_t)(int32_t)(IRQn)) & 0x0FUL)-8UL) >> 2UL) ) -#define _IP_IDX(IRQn) ( (((uint32_t)(int32_t)(IRQn)) >> 2UL) ) - -#define __NVIC_SetPriorityGrouping(X) (void)(X) -#define __NVIC_GetPriorityGrouping() (0U) - -/** - \brief Enable Interrupt - \details Enables a device specific interrupt in the NVIC interrupt controller. - \param [in] IRQn Device specific interrupt number. - \note IRQn must not be negative. - */ -__STATIC_INLINE void __NVIC_EnableIRQ(IRQn_Type IRQn) -{ - if ((int32_t)(IRQn) >= 0) - { - NVIC->ISER[(((uint32_t)IRQn) >> 5UL)] = (uint32_t)(1UL << (((uint32_t)IRQn) & 0x1FUL)); - } -} - - -/** - \brief Get Interrupt Enable status - \details Returns a device specific interrupt enable status from the NVIC interrupt controller. - \param [in] IRQn Device specific interrupt number. - \return 0 Interrupt is not enabled. - \return 1 Interrupt is enabled. - \note IRQn must not be negative. - */ -__STATIC_INLINE uint32_t __NVIC_GetEnableIRQ(IRQn_Type IRQn) -{ - if ((int32_t)(IRQn) >= 0) - { - return((uint32_t)(((NVIC->ISER[(((uint32_t)IRQn) >> 5UL)] & (1UL << (((uint32_t)IRQn) & 0x1FUL))) != 0UL) ? 1UL : 0UL)); - } - else - { - return(0U); - } -} - - -/** - \brief Disable Interrupt - \details Disables a device specific interrupt in the NVIC interrupt controller. - \param [in] IRQn Device specific interrupt number. - \note IRQn must not be negative. - */ -__STATIC_INLINE void __NVIC_DisableIRQ(IRQn_Type IRQn) -{ - if ((int32_t)(IRQn) >= 0) - { - NVIC->ICER[(((uint32_t)IRQn) >> 5UL)] = (uint32_t)(1UL << (((uint32_t)IRQn) & 0x1FUL)); - __DSB(); - __ISB(); - } -} - - -/** - \brief Get Pending Interrupt - \details Reads the NVIC pending register and returns the pending bit for the specified device specific interrupt. - \param [in] IRQn Device specific interrupt number. - \return 0 Interrupt status is not pending. - \return 1 Interrupt status is pending. - \note IRQn must not be negative. - */ -__STATIC_INLINE uint32_t __NVIC_GetPendingIRQ(IRQn_Type IRQn) -{ - if ((int32_t)(IRQn) >= 0) - { - return((uint32_t)(((NVIC->ISPR[(((uint32_t)IRQn) >> 5UL)] & (1UL << (((uint32_t)IRQn) & 0x1FUL))) != 0UL) ? 1UL : 0UL)); - } - else - { - return(0U); - } -} - - -/** - \brief Set Pending Interrupt - \details Sets the pending bit of a device specific interrupt in the NVIC pending register. - \param [in] IRQn Device specific interrupt number. - \note IRQn must not be negative. - */ -__STATIC_INLINE void __NVIC_SetPendingIRQ(IRQn_Type IRQn) -{ - if ((int32_t)(IRQn) >= 0) - { - NVIC->ISPR[(((uint32_t)IRQn) >> 5UL)] = (uint32_t)(1UL << (((uint32_t)IRQn) & 0x1FUL)); - } -} - - -/** - \brief Clear Pending Interrupt - \details Clears the pending bit of a device specific interrupt in the NVIC pending register. - \param [in] IRQn Device specific interrupt number. - \note IRQn must not be negative. - */ -__STATIC_INLINE void __NVIC_ClearPendingIRQ(IRQn_Type IRQn) -{ - if ((int32_t)(IRQn) >= 0) - { - NVIC->ICPR[(((uint32_t)IRQn) >> 5UL)] = (uint32_t)(1UL << (((uint32_t)IRQn) & 0x1FUL)); - } -} - - -/** - \brief Get Active Interrupt - \details Reads the active register in the NVIC and returns the active bit for the device specific interrupt. - \param [in] IRQn Device specific interrupt number. - \return 0 Interrupt status is not active. - \return 1 Interrupt status is active. - \note IRQn must not be negative. - */ -__STATIC_INLINE uint32_t __NVIC_GetActive(IRQn_Type IRQn) -{ - if ((int32_t)(IRQn) >= 0) - { - return((uint32_t)(((NVIC->IABR[(((uint32_t)IRQn) >> 5UL)] & (1UL << (((uint32_t)IRQn) & 0x1FUL))) != 0UL) ? 1UL : 0UL)); - } - else - { - return(0U); - } -} - - -#if defined (__ARM_FEATURE_CMSE) && (__ARM_FEATURE_CMSE == 3U) -/** - \brief Get Interrupt Target State - \details Reads the interrupt target field in the NVIC and returns the interrupt target bit for the device specific interrupt. - \param [in] IRQn Device specific interrupt number. - \return 0 if interrupt is assigned to Secure - \return 1 if interrupt is assigned to Non Secure - \note IRQn must not be negative. - */ -__STATIC_INLINE uint32_t NVIC_GetTargetState(IRQn_Type IRQn) -{ - if ((int32_t)(IRQn) >= 0) - { - return((uint32_t)(((NVIC->ITNS[(((uint32_t)IRQn) >> 5UL)] & (1UL << (((uint32_t)IRQn) & 0x1FUL))) != 0UL) ? 1UL : 0UL)); - } - else - { - return(0U); - } -} - - -/** - \brief Set Interrupt Target State - \details Sets the interrupt target field in the NVIC and returns the interrupt target bit for the device specific interrupt. - \param [in] IRQn Device specific interrupt number. - \return 0 if interrupt is assigned to Secure - 1 if interrupt is assigned to Non Secure - \note IRQn must not be negative. - */ -__STATIC_INLINE uint32_t NVIC_SetTargetState(IRQn_Type IRQn) -{ - if ((int32_t)(IRQn) >= 0) - { - NVIC->ITNS[(((uint32_t)IRQn) >> 5UL)] |= ((uint32_t)(1UL << (((uint32_t)IRQn) & 0x1FUL))); - return((uint32_t)(((NVIC->ITNS[(((uint32_t)IRQn) >> 5UL)] & (1UL << (((uint32_t)IRQn) & 0x1FUL))) != 0UL) ? 1UL : 0UL)); - } - else - { - return(0U); - } -} - - -/** - \brief Clear Interrupt Target State - \details Clears the interrupt target field in the NVIC and returns the interrupt target bit for the device specific interrupt. - \param [in] IRQn Device specific interrupt number. - \return 0 if interrupt is assigned to Secure - 1 if interrupt is assigned to Non Secure - \note IRQn must not be negative. - */ -__STATIC_INLINE uint32_t NVIC_ClearTargetState(IRQn_Type IRQn) -{ - if ((int32_t)(IRQn) >= 0) - { - NVIC->ITNS[(((uint32_t)IRQn) >> 5UL)] &= ~((uint32_t)(1UL << (((uint32_t)IRQn) & 0x1FUL))); - return((uint32_t)(((NVIC->ITNS[(((uint32_t)IRQn) >> 5UL)] & (1UL << (((uint32_t)IRQn) & 0x1FUL))) != 0UL) ? 1UL : 0UL)); - } - else - { - return(0U); - } -} -#endif /* defined (__ARM_FEATURE_CMSE) && (__ARM_FEATURE_CMSE == 3U) */ - - -/** - \brief Set Interrupt Priority - \details Sets the priority of a device specific interrupt or a processor exception. - The interrupt number can be positive to specify a device specific interrupt, - or negative to specify a processor exception. - \param [in] IRQn Interrupt number. - \param [in] priority Priority to set. - \note The priority cannot be set for every processor exception. - */ -__STATIC_INLINE void __NVIC_SetPriority(IRQn_Type IRQn, uint32_t priority) -{ - if ((int32_t)(IRQn) >= 0) - { - NVIC->IPR[_IP_IDX(IRQn)] = ((uint32_t)(NVIC->IPR[_IP_IDX(IRQn)] & ~(0xFFUL << _BIT_SHIFT(IRQn))) | - (((priority << (8U - __NVIC_PRIO_BITS)) & (uint32_t)0xFFUL) << _BIT_SHIFT(IRQn))); - } - else - { - SCB->SHPR[_SHP_IDX(IRQn)] = ((uint32_t)(SCB->SHPR[_SHP_IDX(IRQn)] & ~(0xFFUL << _BIT_SHIFT(IRQn))) | - (((priority << (8U - __NVIC_PRIO_BITS)) & (uint32_t)0xFFUL) << _BIT_SHIFT(IRQn))); - } -} - - -/** - \brief Get Interrupt Priority - \details Reads the priority of a device specific interrupt or a processor exception. - The interrupt number can be positive to specify a device specific interrupt, - or negative to specify a processor exception. - \param [in] IRQn Interrupt number. - \return Interrupt Priority. - Value is aligned automatically to the implemented priority bits of the microcontroller. - */ -__STATIC_INLINE uint32_t __NVIC_GetPriority(IRQn_Type IRQn) -{ - - if ((int32_t)(IRQn) >= 0) - { - return((uint32_t)(((NVIC->IPR[ _IP_IDX(IRQn)] >> _BIT_SHIFT(IRQn) ) & (uint32_t)0xFFUL) >> (8U - __NVIC_PRIO_BITS))); - } - else - { - return((uint32_t)(((SCB->SHPR[_SHP_IDX(IRQn)] >> _BIT_SHIFT(IRQn) ) & (uint32_t)0xFFUL) >> (8U - __NVIC_PRIO_BITS))); - } -} - - -/** - \brief Encode Priority - \details Encodes the priority for an interrupt with the given priority group, - preemptive priority value, and subpriority value. - In case of a conflict between priority grouping and available - priority bits (__NVIC_PRIO_BITS), the smallest possible priority group is set. - \param [in] PriorityGroup Used priority group. - \param [in] PreemptPriority Preemptive priority value (starting from 0). - \param [in] SubPriority Subpriority value (starting from 0). - \return Encoded priority. Value can be used in the function \ref NVIC_SetPriority(). - */ -__STATIC_INLINE uint32_t NVIC_EncodePriority (uint32_t PriorityGroup, uint32_t PreemptPriority, uint32_t SubPriority) -{ - uint32_t PriorityGroupTmp = (PriorityGroup & (uint32_t)0x07UL); /* only values 0..7 are used */ - uint32_t PreemptPriorityBits; - uint32_t SubPriorityBits; - - PreemptPriorityBits = ((7UL - PriorityGroupTmp) > (uint32_t)(__NVIC_PRIO_BITS)) ? (uint32_t)(__NVIC_PRIO_BITS) : (uint32_t)(7UL - PriorityGroupTmp); - SubPriorityBits = ((PriorityGroupTmp + (uint32_t)(__NVIC_PRIO_BITS)) < (uint32_t)7UL) ? (uint32_t)0UL : (uint32_t)((PriorityGroupTmp - 7UL) + (uint32_t)(__NVIC_PRIO_BITS)); - - return ( - ((PreemptPriority & (uint32_t)((1UL << (PreemptPriorityBits)) - 1UL)) << SubPriorityBits) | - ((SubPriority & (uint32_t)((1UL << (SubPriorityBits )) - 1UL))) - ); -} - - -/** - \brief Decode Priority - \details Decodes an interrupt priority value with a given priority group to - preemptive priority value and subpriority value. - In case of a conflict between priority grouping and available - priority bits (__NVIC_PRIO_BITS) the smallest possible priority group is set. - \param [in] Priority Priority value, which can be retrieved with the function \ref NVIC_GetPriority(). - \param [in] PriorityGroup Used priority group. - \param [out] pPreemptPriority Preemptive priority value (starting from 0). - \param [out] pSubPriority Subpriority value (starting from 0). - */ -__STATIC_INLINE void NVIC_DecodePriority (uint32_t Priority, uint32_t PriorityGroup, uint32_t* const pPreemptPriority, uint32_t* const pSubPriority) -{ - uint32_t PriorityGroupTmp = (PriorityGroup & (uint32_t)0x07UL); /* only values 0..7 are used */ - uint32_t PreemptPriorityBits; - uint32_t SubPriorityBits; - - PreemptPriorityBits = ((7UL - PriorityGroupTmp) > (uint32_t)(__NVIC_PRIO_BITS)) ? (uint32_t)(__NVIC_PRIO_BITS) : (uint32_t)(7UL - PriorityGroupTmp); - SubPriorityBits = ((PriorityGroupTmp + (uint32_t)(__NVIC_PRIO_BITS)) < (uint32_t)7UL) ? (uint32_t)0UL : (uint32_t)((PriorityGroupTmp - 7UL) + (uint32_t)(__NVIC_PRIO_BITS)); - - *pPreemptPriority = (Priority >> SubPriorityBits) & (uint32_t)((1UL << (PreemptPriorityBits)) - 1UL); - *pSubPriority = (Priority ) & (uint32_t)((1UL << (SubPriorityBits )) - 1UL); -} - - -/** - \brief Set Interrupt Vector - \details Sets an interrupt vector in SRAM based interrupt vector table. - The interrupt number can be positive to specify a device specific interrupt, - or negative to specify a processor exception. - VTOR must been relocated to SRAM before. - If VTOR is not present address 0 must be mapped to SRAM. - \param [in] IRQn Interrupt number - \param [in] vector Address of interrupt handler function - */ -__STATIC_INLINE void __NVIC_SetVector(IRQn_Type IRQn, uint32_t vector) -{ -#if defined (__VTOR_PRESENT) && (__VTOR_PRESENT == 1U) - uint32_t *vectors = (uint32_t *)SCB->VTOR; -#else - uint32_t *vectors = (uint32_t *)0x0U; -#endif - vectors[(int32_t)IRQn + NVIC_USER_IRQ_OFFSET] = vector; -} - - -/** - \brief Get Interrupt Vector - \details Reads an interrupt vector from interrupt vector table. - The interrupt number can be positive to specify a device specific interrupt, - or negative to specify a processor exception. - \param [in] IRQn Interrupt number. - \return Address of interrupt handler function - */ -__STATIC_INLINE uint32_t __NVIC_GetVector(IRQn_Type IRQn) -{ -#if defined (__VTOR_PRESENT) && (__VTOR_PRESENT == 1U) - uint32_t *vectors = (uint32_t *)SCB->VTOR; -#else - uint32_t *vectors = (uint32_t *)0x0U; -#endif - return vectors[(int32_t)IRQn + NVIC_USER_IRQ_OFFSET]; -} - - -/** - \brief System Reset - \details Initiates a system reset request to reset the MCU. - */ -__NO_RETURN __STATIC_INLINE void __NVIC_SystemReset(void) -{ - __DSB(); /* Ensure all outstanding memory accesses included - buffered write are completed before reset */ - SCB->AIRCR = ((0x5FAUL << SCB_AIRCR_VECTKEY_Pos) | - SCB_AIRCR_SYSRESETREQ_Msk); - __DSB(); /* Ensure completion of memory access */ - - for(;;) /* wait until reset */ - { - __NOP(); - } -} - -#if defined (__ARM_FEATURE_CMSE) && (__ARM_FEATURE_CMSE == 3U) -/** - \brief Enable Interrupt (non-secure) - \details Enables a device specific interrupt in the non-secure NVIC interrupt controller when in secure state. - \param [in] IRQn Device specific interrupt number. - \note IRQn must not be negative. - */ -__STATIC_INLINE void TZ_NVIC_EnableIRQ_NS(IRQn_Type IRQn) -{ - if ((int32_t)(IRQn) >= 0) - { - NVIC_NS->ISER[(((uint32_t)IRQn) >> 5UL)] = (uint32_t)(1UL << (((uint32_t)IRQn) & 0x1FUL)); - } -} - - -/** - \brief Get Interrupt Enable status (non-secure) - \details Returns a device specific interrupt enable status from the non-secure NVIC interrupt controller when in secure state. - \param [in] IRQn Device specific interrupt number. - \return 0 Interrupt is not enabled. - \return 1 Interrupt is enabled. - \note IRQn must not be negative. - */ -__STATIC_INLINE uint32_t TZ_NVIC_GetEnableIRQ_NS(IRQn_Type IRQn) -{ - if ((int32_t)(IRQn) >= 0) - { - return((uint32_t)(((NVIC_NS->ISER[(((uint32_t)IRQn) >> 5UL)] & (1UL << (((uint32_t)IRQn) & 0x1FUL))) != 0UL) ? 1UL : 0UL)); - } - else - { - return(0U); - } -} - - -/** - \brief Disable Interrupt (non-secure) - \details Disables a device specific interrupt in the non-secure NVIC interrupt controller when in secure state. - \param [in] IRQn Device specific interrupt number. - \note IRQn must not be negative. - */ -__STATIC_INLINE void TZ_NVIC_DisableIRQ_NS(IRQn_Type IRQn) -{ - if ((int32_t)(IRQn) >= 0) - { - NVIC_NS->ICER[(((uint32_t)IRQn) >> 5UL)] = (uint32_t)(1UL << (((uint32_t)IRQn) & 0x1FUL)); - } -} - - -/** - \brief Get Pending Interrupt (non-secure) - \details Reads the NVIC pending register in the non-secure NVIC when in secure state and returns the pending bit for the specified device specific interrupt. - \param [in] IRQn Device specific interrupt number. - \return 0 Interrupt status is not pending. - \return 1 Interrupt status is pending. - \note IRQn must not be negative. - */ -__STATIC_INLINE uint32_t TZ_NVIC_GetPendingIRQ_NS(IRQn_Type IRQn) -{ - if ((int32_t)(IRQn) >= 0) - { - return((uint32_t)(((NVIC_NS->ISPR[(((uint32_t)IRQn) >> 5UL)] & (1UL << (((uint32_t)IRQn) & 0x1FUL))) != 0UL) ? 1UL : 0UL)); - } - else - { - return(0U); - } -} - - -/** - \brief Set Pending Interrupt (non-secure) - \details Sets the pending bit of a device specific interrupt in the non-secure NVIC pending register when in secure state. - \param [in] IRQn Device specific interrupt number. - \note IRQn must not be negative. - */ -__STATIC_INLINE void TZ_NVIC_SetPendingIRQ_NS(IRQn_Type IRQn) -{ - if ((int32_t)(IRQn) >= 0) - { - NVIC_NS->ISPR[(((uint32_t)IRQn) >> 5UL)] = (uint32_t)(1UL << (((uint32_t)IRQn) & 0x1FUL)); - } -} - - -/** - \brief Clear Pending Interrupt (non-secure) - \details Clears the pending bit of a device specific interrupt in the non-secure NVIC pending register when in secure state. - \param [in] IRQn Device specific interrupt number. - \note IRQn must not be negative. - */ -__STATIC_INLINE void TZ_NVIC_ClearPendingIRQ_NS(IRQn_Type IRQn) -{ - if ((int32_t)(IRQn) >= 0) - { - NVIC_NS->ICPR[(((uint32_t)IRQn) >> 5UL)] = (uint32_t)(1UL << (((uint32_t)IRQn) & 0x1FUL)); - } -} - - -/** - \brief Get Active Interrupt (non-secure) - \details Reads the active register in non-secure NVIC when in secure state and returns the active bit for the device specific interrupt. - \param [in] IRQn Device specific interrupt number. - \return 0 Interrupt status is not active. - \return 1 Interrupt status is active. - \note IRQn must not be negative. - */ -__STATIC_INLINE uint32_t TZ_NVIC_GetActive_NS(IRQn_Type IRQn) -{ - if ((int32_t)(IRQn) >= 0) - { - return((uint32_t)(((NVIC_NS->IABR[(((uint32_t)IRQn) >> 5UL)] & (1UL << (((uint32_t)IRQn) & 0x1FUL))) != 0UL) ? 1UL : 0UL)); - } - else - { - return(0U); - } -} - - -/** - \brief Set Interrupt Priority (non-secure) - \details Sets the priority of a non-secure device specific interrupt or a non-secure processor exception when in secure state. - The interrupt number can be positive to specify a device specific interrupt, - or negative to specify a processor exception. - \param [in] IRQn Interrupt number. - \param [in] priority Priority to set. - \note The priority cannot be set for every non-secure processor exception. - */ -__STATIC_INLINE void TZ_NVIC_SetPriority_NS(IRQn_Type IRQn, uint32_t priority) -{ - if ((int32_t)(IRQn) >= 0) - { - NVIC_NS->IPR[_IP_IDX(IRQn)] = ((uint32_t)(NVIC_NS->IPR[_IP_IDX(IRQn)] & ~(0xFFUL << _BIT_SHIFT(IRQn))) | - (((priority << (8U - __NVIC_PRIO_BITS)) & (uint32_t)0xFFUL) << _BIT_SHIFT(IRQn))); - } - else - { - SCB_NS->SHPR[_SHP_IDX(IRQn)] = ((uint32_t)(SCB_NS->SHPR[_SHP_IDX(IRQn)] & ~(0xFFUL << _BIT_SHIFT(IRQn))) | - (((priority << (8U - __NVIC_PRIO_BITS)) & (uint32_t)0xFFUL) << _BIT_SHIFT(IRQn))); - } -} - - -/** - \brief Get Interrupt Priority (non-secure) - \details Reads the priority of a non-secure device specific interrupt or a non-secure processor exception when in secure state. - The interrupt number can be positive to specify a device specific interrupt, - or negative to specify a processor exception. - \param [in] IRQn Interrupt number. - \return Interrupt Priority. Value is aligned automatically to the implemented priority bits of the microcontroller. - */ -__STATIC_INLINE uint32_t TZ_NVIC_GetPriority_NS(IRQn_Type IRQn) -{ - - if ((int32_t)(IRQn) >= 0) - { - return((uint32_t)(((NVIC_NS->IPR[ _IP_IDX(IRQn)] >> _BIT_SHIFT(IRQn) ) & (uint32_t)0xFFUL) >> (8U - __NVIC_PRIO_BITS))); - } - else - { - return((uint32_t)(((SCB_NS->SHPR[_SHP_IDX(IRQn)] >> _BIT_SHIFT(IRQn) ) & (uint32_t)0xFFUL) >> (8U - __NVIC_PRIO_BITS))); - } -} -#endif /* defined (__ARM_FEATURE_CMSE) &&(__ARM_FEATURE_CMSE == 3U) */ - -/*@} end of CMSIS_Core_NVICFunctions */ - -/* ########################## MPU functions #################################### */ - -#if defined (__MPU_PRESENT) && (__MPU_PRESENT == 1U) - -#include "mpu_armv8.h" - -#endif - -/* ########################## FPU functions #################################### */ -/** - \ingroup CMSIS_Core_FunctionInterface - \defgroup CMSIS_Core_FpuFunctions FPU Functions - \brief Function that provides FPU type. - @{ - */ - -/** - \brief get FPU type - \details returns the FPU type - \returns - - \b 0: No FPU - - \b 1: Single precision FPU - - \b 2: Double + Single precision FPU - */ -__STATIC_INLINE uint32_t SCB_GetFPUType(void) -{ - return 0U; /* No FPU */ -} - - -/*@} end of CMSIS_Core_FpuFunctions */ - - - -/* ########################## SAU functions #################################### */ -/** - \ingroup CMSIS_Core_FunctionInterface - \defgroup CMSIS_Core_SAUFunctions SAU Functions - \brief Functions that configure the SAU. - @{ - */ - -#if defined (__ARM_FEATURE_CMSE) && (__ARM_FEATURE_CMSE == 3U) - -/** - \brief Enable SAU - \details Enables the Security Attribution Unit (SAU). - */ -__STATIC_INLINE void TZ_SAU_Enable(void) -{ - SAU->CTRL |= (SAU_CTRL_ENABLE_Msk); -} - - - -/** - \brief Disable SAU - \details Disables the Security Attribution Unit (SAU). - */ -__STATIC_INLINE void TZ_SAU_Disable(void) -{ - SAU->CTRL &= ~(SAU_CTRL_ENABLE_Msk); -} - -#endif /* defined (__ARM_FEATURE_CMSE) && (__ARM_FEATURE_CMSE == 3U) */ - -/*@} end of CMSIS_Core_SAUFunctions */ - - - - -/* ################################## SysTick function ############################################ */ -/** - \ingroup CMSIS_Core_FunctionInterface - \defgroup CMSIS_Core_SysTickFunctions SysTick Functions - \brief Functions that configure the System. - @{ - */ - -#if defined (__Vendor_SysTickConfig) && (__Vendor_SysTickConfig == 0U) - -/** - \brief System Tick Configuration - \details Initializes the System Timer and its interrupt, and starts the System Tick Timer. - Counter is in free running mode to generate periodic interrupts. - \param [in] ticks Number of ticks between two interrupts. - \return 0 Function succeeded. - \return 1 Function failed. - \note When the variable __Vendor_SysTickConfig is set to 1, then the - function SysTick_Config is not included. In this case, the file device.h - must contain a vendor-specific implementation of this function. - */ -__STATIC_INLINE uint32_t SysTick_Config(uint32_t ticks) -{ - if ((ticks - 1UL) > SysTick_LOAD_RELOAD_Msk) - { - return (1UL); /* Reload value impossible */ - } - - SysTick->LOAD = (uint32_t)(ticks - 1UL); /* set reload register */ - NVIC_SetPriority (SysTick_IRQn, (1UL << __NVIC_PRIO_BITS) - 1UL); /* set Priority for Systick Interrupt */ - SysTick->VAL = 0UL; /* Load the SysTick Counter Value */ - SysTick->CTRL = SysTick_CTRL_CLKSOURCE_Msk | - SysTick_CTRL_TICKINT_Msk | - SysTick_CTRL_ENABLE_Msk; /* Enable SysTick IRQ and SysTick Timer */ - return (0UL); /* Function successful */ -} - -#if defined (__ARM_FEATURE_CMSE) && (__ARM_FEATURE_CMSE == 3U) -/** - \brief System Tick Configuration (non-secure) - \details Initializes the non-secure System Timer and its interrupt when in secure state, and starts the System Tick Timer. - Counter is in free running mode to generate periodic interrupts. - \param [in] ticks Number of ticks between two interrupts. - \return 0 Function succeeded. - \return 1 Function failed. - \note When the variable __Vendor_SysTickConfig is set to 1, then the - function TZ_SysTick_Config_NS is not included. In this case, the file device.h - must contain a vendor-specific implementation of this function. - - */ -__STATIC_INLINE uint32_t TZ_SysTick_Config_NS(uint32_t ticks) -{ - if ((ticks - 1UL) > SysTick_LOAD_RELOAD_Msk) - { - return (1UL); /* Reload value impossible */ - } - - SysTick_NS->LOAD = (uint32_t)(ticks - 1UL); /* set reload register */ - TZ_NVIC_SetPriority_NS (SysTick_IRQn, (1UL << __NVIC_PRIO_BITS) - 1UL); /* set Priority for Systick Interrupt */ - SysTick_NS->VAL = 0UL; /* Load the SysTick Counter Value */ - SysTick_NS->CTRL = SysTick_CTRL_CLKSOURCE_Msk | - SysTick_CTRL_TICKINT_Msk | - SysTick_CTRL_ENABLE_Msk; /* Enable SysTick IRQ and SysTick Timer */ - return (0UL); /* Function successful */ -} -#endif /* defined (__ARM_FEATURE_CMSE) && (__ARM_FEATURE_CMSE == 3U) */ - -#endif - -/*@} end of CMSIS_Core_SysTickFunctions */ - - - - -#ifdef __cplusplus -} -#endif - -#endif /* __CORE_ARMV8MBL_H_DEPENDANT */ - -#endif /* __CMSIS_GENERIC */ diff --git a/test_dma/Drivers/CMSIS/Include/core_armv8mml.h b/test_dma/Drivers/CMSIS/Include/core_armv8mml.h deleted file mode 100644 index 2d0f106..0000000 --- a/test_dma/Drivers/CMSIS/Include/core_armv8mml.h +++ /dev/null @@ -1,2927 +0,0 @@ -/**************************************************************************//** - * @file core_armv8mml.h - * @brief CMSIS Armv8-M Mainline Core Peripheral Access Layer Header File - * @version V5.0.7 - * @date 06. July 2018 - ******************************************************************************/ -/* - * Copyright (c) 2009-2018 Arm Limited. All rights reserved. - * - * SPDX-License-Identifier: Apache-2.0 - * - * Licensed under the Apache License, Version 2.0 (the License); you may - * not use this file except in compliance with the License. - * You may obtain a copy of the License at - * - * www.apache.org/licenses/LICENSE-2.0 - * - * Unless required by applicable law or agreed to in writing, software - * distributed under the License is distributed on an AS IS BASIS, WITHOUT - * WARRANTIES OR CONDITIONS OF ANY KIND, either express or implied. - * See the License for the specific language governing permissions and - * limitations under the License. - */ - -#if defined ( __ICCARM__ ) - #pragma system_include /* treat file as system include file for MISRA check */ -#elif defined (__clang__) - #pragma clang system_header /* treat file as system include file */ -#endif - -#ifndef __CORE_ARMV8MML_H_GENERIC -#define __CORE_ARMV8MML_H_GENERIC - -#include - -#ifdef __cplusplus - extern "C" { -#endif - -/** - \page CMSIS_MISRA_Exceptions MISRA-C:2004 Compliance Exceptions - CMSIS violates the following MISRA-C:2004 rules: - - \li Required Rule 8.5, object/function definition in header file.
- Function definitions in header files are used to allow 'inlining'. - - \li Required Rule 18.4, declaration of union type or object of union type: '{...}'.
- Unions are used for effective representation of core registers. - - \li Advisory Rule 19.7, Function-like macro defined.
- Function-like macros are used to allow more efficient code. - */ - - -/******************************************************************************* - * CMSIS definitions - ******************************************************************************/ -/** - \ingroup Cortex_ARMv8MML - @{ - */ - -#include "cmsis_version.h" - -/* CMSIS Armv8MML definitions */ -#define __ARMv8MML_CMSIS_VERSION_MAIN (__CM_CMSIS_VERSION_MAIN) /*!< \deprecated [31:16] CMSIS HAL main version */ -#define __ARMv8MML_CMSIS_VERSION_SUB (__CM_CMSIS_VERSION_SUB) /*!< \deprecated [15:0] CMSIS HAL sub version */ -#define __ARMv8MML_CMSIS_VERSION ((__ARMv8MML_CMSIS_VERSION_MAIN << 16U) | \ - __ARMv8MML_CMSIS_VERSION_SUB ) /*!< \deprecated CMSIS HAL version number */ - -#define __CORTEX_M (81U) /*!< Cortex-M Core */ - -/** __FPU_USED indicates whether an FPU is used or not. - For this, __FPU_PRESENT has to be checked prior to making use of FPU specific registers and functions. -*/ -#if defined ( __CC_ARM ) - #if defined __TARGET_FPU_VFP - #if defined (__FPU_PRESENT) && (__FPU_PRESENT == 1U) - #define __FPU_USED 1U - #else - #error "Compiler generates FPU instructions for a device without an FPU (check __FPU_PRESENT)" - #define __FPU_USED 0U - #endif - #else - #define __FPU_USED 0U - #endif - - #if defined(__ARM_FEATURE_DSP) - #if defined(__DSP_PRESENT) && (__DSP_PRESENT == 1U) - #define __DSP_USED 1U - #else - #error "Compiler generates DSP (SIMD) instructions for a devices without DSP extensions (check __DSP_PRESENT)" - #define __DSP_USED 0U - #endif - #else - #define __DSP_USED 0U - #endif - -#elif defined (__ARMCC_VERSION) && (__ARMCC_VERSION >= 6010050) - #if defined __ARM_PCS_VFP - #if defined (__FPU_PRESENT) && (__FPU_PRESENT == 1U) - #define __FPU_USED 1U - #else - #warning "Compiler generates FPU instructions for a device without an FPU (check __FPU_PRESENT)" - #define __FPU_USED 0U - #endif - #else - #define __FPU_USED 0U - #endif - - #if defined(__ARM_FEATURE_DSP) - #if defined(__DSP_PRESENT) && (__DSP_PRESENT == 1U) - #define __DSP_USED 1U - #else - #error "Compiler generates DSP (SIMD) instructions for a devices without DSP extensions (check __DSP_PRESENT)" - #define __DSP_USED 0U - #endif - #else - #define __DSP_USED 0U - #endif - -#elif defined ( __GNUC__ ) - #if defined (__VFP_FP__) && !defined(__SOFTFP__) - #if defined (__FPU_PRESENT) && (__FPU_PRESENT == 1U) - #define __FPU_USED 1U - #else - #error "Compiler generates FPU instructions for a device without an FPU (check __FPU_PRESENT)" - #define __FPU_USED 0U - #endif - #else - #define __FPU_USED 0U - #endif - - #if defined(__ARM_FEATURE_DSP) - #if defined(__DSP_PRESENT) && (__DSP_PRESENT == 1U) - #define __DSP_USED 1U - #else - #error "Compiler generates DSP (SIMD) instructions for a devices without DSP extensions (check __DSP_PRESENT)" - #define __DSP_USED 0U - #endif - #else - #define __DSP_USED 0U - #endif - -#elif defined ( __ICCARM__ ) - #if defined __ARMVFP__ - #if defined (__FPU_PRESENT) && (__FPU_PRESENT == 1U) - #define __FPU_USED 1U - #else - #error "Compiler generates FPU instructions for a device without an FPU (check __FPU_PRESENT)" - #define __FPU_USED 0U - #endif - #else - #define __FPU_USED 0U - #endif - - #if defined(__ARM_FEATURE_DSP) - #if defined(__DSP_PRESENT) && (__DSP_PRESENT == 1U) - #define __DSP_USED 1U - #else - #error "Compiler generates DSP (SIMD) instructions for a devices without DSP extensions (check __DSP_PRESENT)" - #define __DSP_USED 0U - #endif - #else - #define __DSP_USED 0U - #endif - -#elif defined ( __TI_ARM__ ) - #if defined __TI_VFP_SUPPORT__ - #if defined (__FPU_PRESENT) && (__FPU_PRESENT == 1U) - #define __FPU_USED 1U - #else - #error "Compiler generates FPU instructions for a device without an FPU (check __FPU_PRESENT)" - #define __FPU_USED 0U - #endif - #else - #define __FPU_USED 0U - #endif - -#elif defined ( __TASKING__ ) - #if defined __FPU_VFP__ - #if defined (__FPU_PRESENT) && (__FPU_PRESENT == 1U) - #define __FPU_USED 1U - #else - #error "Compiler generates FPU instructions for a device without an FPU (check __FPU_PRESENT)" - #define __FPU_USED 0U - #endif - #else - #define __FPU_USED 0U - #endif - -#elif defined ( __CSMC__ ) - #if ( __CSMC__ & 0x400U) - #if defined (__FPU_PRESENT) && (__FPU_PRESENT == 1U) - #define __FPU_USED 1U - #else - #error "Compiler generates FPU instructions for a device without an FPU (check __FPU_PRESENT)" - #define __FPU_USED 0U - #endif - #else - #define __FPU_USED 0U - #endif - -#endif - -#include "cmsis_compiler.h" /* CMSIS compiler specific defines */ - - -#ifdef __cplusplus -} -#endif - -#endif /* __CORE_ARMV8MML_H_GENERIC */ - -#ifndef __CMSIS_GENERIC - -#ifndef __CORE_ARMV8MML_H_DEPENDANT -#define __CORE_ARMV8MML_H_DEPENDANT - -#ifdef __cplusplus - extern "C" { -#endif - -/* check device defines and use defaults */ -#if defined __CHECK_DEVICE_DEFINES - #ifndef __ARMv8MML_REV - #define __ARMv8MML_REV 0x0000U - #warning "__ARMv8MML_REV not defined in device header file; using default!" - #endif - - #ifndef __FPU_PRESENT - #define __FPU_PRESENT 0U - #warning "__FPU_PRESENT not defined in device header file; using default!" - #endif - - #ifndef __MPU_PRESENT - #define __MPU_PRESENT 0U - #warning "__MPU_PRESENT not defined in device header file; using default!" - #endif - - #ifndef __SAUREGION_PRESENT - #define __SAUREGION_PRESENT 0U - #warning "__SAUREGION_PRESENT not defined in device header file; using default!" - #endif - - #ifndef __DSP_PRESENT - #define __DSP_PRESENT 0U - #warning "__DSP_PRESENT not defined in device header file; using default!" - #endif - - #ifndef __NVIC_PRIO_BITS - #define __NVIC_PRIO_BITS 3U - #warning "__NVIC_PRIO_BITS not defined in device header file; using default!" - #endif - - #ifndef __Vendor_SysTickConfig - #define __Vendor_SysTickConfig 0U - #warning "__Vendor_SysTickConfig not defined in device header file; using default!" - #endif -#endif - -/* IO definitions (access restrictions to peripheral registers) */ -/** - \defgroup CMSIS_glob_defs CMSIS Global Defines - - IO Type Qualifiers are used - \li to specify the access to peripheral variables. - \li for automatic generation of peripheral register debug information. -*/ -#ifdef __cplusplus - #define __I volatile /*!< Defines 'read only' permissions */ -#else - #define __I volatile const /*!< Defines 'read only' permissions */ -#endif -#define __O volatile /*!< Defines 'write only' permissions */ -#define __IO volatile /*!< Defines 'read / write' permissions */ - -/* following defines should be used for structure members */ -#define __IM volatile const /*! Defines 'read only' structure member permissions */ -#define __OM volatile /*! Defines 'write only' structure member permissions */ -#define __IOM volatile /*! Defines 'read / write' structure member permissions */ - -/*@} end of group ARMv8MML */ - - - -/******************************************************************************* - * Register Abstraction - Core Register contain: - - Core Register - - Core NVIC Register - - Core SCB Register - - Core SysTick Register - - Core Debug Register - - Core MPU Register - - Core SAU Register - - Core FPU Register - ******************************************************************************/ -/** - \defgroup CMSIS_core_register Defines and Type Definitions - \brief Type definitions and defines for Cortex-M processor based devices. -*/ - -/** - \ingroup CMSIS_core_register - \defgroup CMSIS_CORE Status and Control Registers - \brief Core Register type definitions. - @{ - */ - -/** - \brief Union type to access the Application Program Status Register (APSR). - */ -typedef union -{ - struct - { - uint32_t _reserved0:16; /*!< bit: 0..15 Reserved */ - uint32_t GE:4; /*!< bit: 16..19 Greater than or Equal flags */ - uint32_t _reserved1:7; /*!< bit: 20..26 Reserved */ - uint32_t Q:1; /*!< bit: 27 Saturation condition flag */ - uint32_t V:1; /*!< bit: 28 Overflow condition code flag */ - uint32_t C:1; /*!< bit: 29 Carry condition code flag */ - uint32_t Z:1; /*!< bit: 30 Zero condition code flag */ - uint32_t N:1; /*!< bit: 31 Negative condition code flag */ - } b; /*!< Structure used for bit access */ - uint32_t w; /*!< Type used for word access */ -} APSR_Type; - -/* APSR Register Definitions */ -#define APSR_N_Pos 31U /*!< APSR: N Position */ -#define APSR_N_Msk (1UL << APSR_N_Pos) /*!< APSR: N Mask */ - -#define APSR_Z_Pos 30U /*!< APSR: Z Position */ -#define APSR_Z_Msk (1UL << APSR_Z_Pos) /*!< APSR: Z Mask */ - -#define APSR_C_Pos 29U /*!< APSR: C Position */ -#define APSR_C_Msk (1UL << APSR_C_Pos) /*!< APSR: C Mask */ - -#define APSR_V_Pos 28U /*!< APSR: V Position */ -#define APSR_V_Msk (1UL << APSR_V_Pos) /*!< APSR: V Mask */ - -#define APSR_Q_Pos 27U /*!< APSR: Q Position */ -#define APSR_Q_Msk (1UL << APSR_Q_Pos) /*!< APSR: Q Mask */ - -#define APSR_GE_Pos 16U /*!< APSR: GE Position */ -#define APSR_GE_Msk (0xFUL << APSR_GE_Pos) /*!< APSR: GE Mask */ - - -/** - \brief Union type to access the Interrupt Program Status Register (IPSR). - */ -typedef union -{ - struct - { - uint32_t ISR:9; /*!< bit: 0.. 8 Exception number */ - uint32_t _reserved0:23; /*!< bit: 9..31 Reserved */ - } b; /*!< Structure used for bit access */ - uint32_t w; /*!< Type used for word access */ -} IPSR_Type; - -/* IPSR Register Definitions */ -#define IPSR_ISR_Pos 0U /*!< IPSR: ISR Position */ -#define IPSR_ISR_Msk (0x1FFUL /*<< IPSR_ISR_Pos*/) /*!< IPSR: ISR Mask */ - - -/** - \brief Union type to access the Special-Purpose Program Status Registers (xPSR). - */ -typedef union -{ - struct - { - uint32_t ISR:9; /*!< bit: 0.. 8 Exception number */ - uint32_t _reserved0:7; /*!< bit: 9..15 Reserved */ - uint32_t GE:4; /*!< bit: 16..19 Greater than or Equal flags */ - uint32_t _reserved1:4; /*!< bit: 20..23 Reserved */ - uint32_t T:1; /*!< bit: 24 Thumb bit (read 0) */ - uint32_t IT:2; /*!< bit: 25..26 saved IT state (read 0) */ - uint32_t Q:1; /*!< bit: 27 Saturation condition flag */ - uint32_t V:1; /*!< bit: 28 Overflow condition code flag */ - uint32_t C:1; /*!< bit: 29 Carry condition code flag */ - uint32_t Z:1; /*!< bit: 30 Zero condition code flag */ - uint32_t N:1; /*!< bit: 31 Negative condition code flag */ - } b; /*!< Structure used for bit access */ - uint32_t w; /*!< Type used for word access */ -} xPSR_Type; - -/* xPSR Register Definitions */ -#define xPSR_N_Pos 31U /*!< xPSR: N Position */ -#define xPSR_N_Msk (1UL << xPSR_N_Pos) /*!< xPSR: N Mask */ - -#define xPSR_Z_Pos 30U /*!< xPSR: Z Position */ -#define xPSR_Z_Msk (1UL << xPSR_Z_Pos) /*!< xPSR: Z Mask */ - -#define xPSR_C_Pos 29U /*!< xPSR: C Position */ -#define xPSR_C_Msk (1UL << xPSR_C_Pos) /*!< xPSR: C Mask */ - -#define xPSR_V_Pos 28U /*!< xPSR: V Position */ -#define xPSR_V_Msk (1UL << xPSR_V_Pos) /*!< xPSR: V Mask */ - -#define xPSR_Q_Pos 27U /*!< xPSR: Q Position */ -#define xPSR_Q_Msk (1UL << xPSR_Q_Pos) /*!< xPSR: Q Mask */ - -#define xPSR_IT_Pos 25U /*!< xPSR: IT Position */ -#define xPSR_IT_Msk (3UL << xPSR_IT_Pos) /*!< xPSR: IT Mask */ - -#define xPSR_T_Pos 24U /*!< xPSR: T Position */ -#define xPSR_T_Msk (1UL << xPSR_T_Pos) /*!< xPSR: T Mask */ - -#define xPSR_GE_Pos 16U /*!< xPSR: GE Position */ -#define xPSR_GE_Msk (0xFUL << xPSR_GE_Pos) /*!< xPSR: GE Mask */ - -#define xPSR_ISR_Pos 0U /*!< xPSR: ISR Position */ -#define xPSR_ISR_Msk (0x1FFUL /*<< xPSR_ISR_Pos*/) /*!< xPSR: ISR Mask */ - - -/** - \brief Union type to access the Control Registers (CONTROL). - */ -typedef union -{ - struct - { - uint32_t nPRIV:1; /*!< bit: 0 Execution privilege in Thread mode */ - uint32_t SPSEL:1; /*!< bit: 1 Stack-pointer select */ - uint32_t FPCA:1; /*!< bit: 2 Floating-point context active */ - uint32_t SFPA:1; /*!< bit: 3 Secure floating-point active */ - uint32_t _reserved1:28; /*!< bit: 4..31 Reserved */ - } b; /*!< Structure used for bit access */ - uint32_t w; /*!< Type used for word access */ -} CONTROL_Type; - -/* CONTROL Register Definitions */ -#define CONTROL_SFPA_Pos 3U /*!< CONTROL: SFPA Position */ -#define CONTROL_SFPA_Msk (1UL << CONTROL_SFPA_Pos) /*!< CONTROL: SFPA Mask */ - -#define CONTROL_FPCA_Pos 2U /*!< CONTROL: FPCA Position */ -#define CONTROL_FPCA_Msk (1UL << CONTROL_FPCA_Pos) /*!< CONTROL: FPCA Mask */ - -#define CONTROL_SPSEL_Pos 1U /*!< CONTROL: SPSEL Position */ -#define CONTROL_SPSEL_Msk (1UL << CONTROL_SPSEL_Pos) /*!< CONTROL: SPSEL Mask */ - -#define CONTROL_nPRIV_Pos 0U /*!< CONTROL: nPRIV Position */ -#define CONTROL_nPRIV_Msk (1UL /*<< CONTROL_nPRIV_Pos*/) /*!< CONTROL: nPRIV Mask */ - -/*@} end of group CMSIS_CORE */ - - -/** - \ingroup CMSIS_core_register - \defgroup CMSIS_NVIC Nested Vectored Interrupt Controller (NVIC) - \brief Type definitions for the NVIC Registers - @{ - */ - -/** - \brief Structure type to access the Nested Vectored Interrupt Controller (NVIC). - */ -typedef struct -{ - __IOM uint32_t ISER[16U]; /*!< Offset: 0x000 (R/W) Interrupt Set Enable Register */ - uint32_t RESERVED0[16U]; - __IOM uint32_t ICER[16U]; /*!< Offset: 0x080 (R/W) Interrupt Clear Enable Register */ - uint32_t RSERVED1[16U]; - __IOM uint32_t ISPR[16U]; /*!< Offset: 0x100 (R/W) Interrupt Set Pending Register */ - uint32_t RESERVED2[16U]; - __IOM uint32_t ICPR[16U]; /*!< Offset: 0x180 (R/W) Interrupt Clear Pending Register */ - uint32_t RESERVED3[16U]; - __IOM uint32_t IABR[16U]; /*!< Offset: 0x200 (R/W) Interrupt Active bit Register */ - uint32_t RESERVED4[16U]; - __IOM uint32_t ITNS[16U]; /*!< Offset: 0x280 (R/W) Interrupt Non-Secure State Register */ - uint32_t RESERVED5[16U]; - __IOM uint8_t IPR[496U]; /*!< Offset: 0x300 (R/W) Interrupt Priority Register (8Bit wide) */ - uint32_t RESERVED6[580U]; - __OM uint32_t STIR; /*!< Offset: 0xE00 ( /W) Software Trigger Interrupt Register */ -} NVIC_Type; - -/* Software Triggered Interrupt Register Definitions */ -#define NVIC_STIR_INTID_Pos 0U /*!< STIR: INTLINESNUM Position */ -#define NVIC_STIR_INTID_Msk (0x1FFUL /*<< NVIC_STIR_INTID_Pos*/) /*!< STIR: INTLINESNUM Mask */ - -/*@} end of group CMSIS_NVIC */ - - -/** - \ingroup CMSIS_core_register - \defgroup CMSIS_SCB System Control Block (SCB) - \brief Type definitions for the System Control Block Registers - @{ - */ - -/** - \brief Structure type to access the System Control Block (SCB). - */ -typedef struct -{ - __IM uint32_t CPUID; /*!< Offset: 0x000 (R/ ) CPUID Base Register */ - __IOM uint32_t ICSR; /*!< Offset: 0x004 (R/W) Interrupt Control and State Register */ - __IOM uint32_t VTOR; /*!< Offset: 0x008 (R/W) Vector Table Offset Register */ - __IOM uint32_t AIRCR; /*!< Offset: 0x00C (R/W) Application Interrupt and Reset Control Register */ - __IOM uint32_t SCR; /*!< Offset: 0x010 (R/W) System Control Register */ - __IOM uint32_t CCR; /*!< Offset: 0x014 (R/W) Configuration Control Register */ - __IOM uint8_t SHPR[12U]; /*!< Offset: 0x018 (R/W) System Handlers Priority Registers (4-7, 8-11, 12-15) */ - __IOM uint32_t SHCSR; /*!< Offset: 0x024 (R/W) System Handler Control and State Register */ - __IOM uint32_t CFSR; /*!< Offset: 0x028 (R/W) Configurable Fault Status Register */ - __IOM uint32_t HFSR; /*!< Offset: 0x02C (R/W) HardFault Status Register */ - __IOM uint32_t DFSR; /*!< Offset: 0x030 (R/W) Debug Fault Status Register */ - __IOM uint32_t MMFAR; /*!< Offset: 0x034 (R/W) MemManage Fault Address Register */ - __IOM uint32_t BFAR; /*!< Offset: 0x038 (R/W) BusFault Address Register */ - __IOM uint32_t AFSR; /*!< Offset: 0x03C (R/W) Auxiliary Fault Status Register */ - __IM uint32_t ID_PFR[2U]; /*!< Offset: 0x040 (R/ ) Processor Feature Register */ - __IM uint32_t ID_DFR; /*!< Offset: 0x048 (R/ ) Debug Feature Register */ - __IM uint32_t ID_ADR; /*!< Offset: 0x04C (R/ ) Auxiliary Feature Register */ - __IM uint32_t ID_MMFR[4U]; /*!< Offset: 0x050 (R/ ) Memory Model Feature Register */ - __IM uint32_t ID_ISAR[6U]; /*!< Offset: 0x060 (R/ ) Instruction Set Attributes Register */ - __IM uint32_t CLIDR; /*!< Offset: 0x078 (R/ ) Cache Level ID register */ - __IM uint32_t CTR; /*!< Offset: 0x07C (R/ ) Cache Type register */ - __IM uint32_t CCSIDR; /*!< Offset: 0x080 (R/ ) Cache Size ID Register */ - __IOM uint32_t CSSELR; /*!< Offset: 0x084 (R/W) Cache Size Selection Register */ - __IOM uint32_t CPACR; /*!< Offset: 0x088 (R/W) Coprocessor Access Control Register */ - __IOM uint32_t NSACR; /*!< Offset: 0x08C (R/W) Non-Secure Access Control Register */ - uint32_t RESERVED3[92U]; - __OM uint32_t STIR; /*!< Offset: 0x200 ( /W) Software Triggered Interrupt Register */ - uint32_t RESERVED4[15U]; - __IM uint32_t MVFR0; /*!< Offset: 0x240 (R/ ) Media and VFP Feature Register 0 */ - __IM uint32_t MVFR1; /*!< Offset: 0x244 (R/ ) Media and VFP Feature Register 1 */ - __IM uint32_t MVFR2; /*!< Offset: 0x248 (R/ ) Media and VFP Feature Register 2 */ - uint32_t RESERVED5[1U]; - __OM uint32_t ICIALLU; /*!< Offset: 0x250 ( /W) I-Cache Invalidate All to PoU */ - uint32_t RESERVED6[1U]; - __OM uint32_t ICIMVAU; /*!< Offset: 0x258 ( /W) I-Cache Invalidate by MVA to PoU */ - __OM uint32_t DCIMVAC; /*!< Offset: 0x25C ( /W) D-Cache Invalidate by MVA to PoC */ - __OM uint32_t DCISW; /*!< Offset: 0x260 ( /W) D-Cache Invalidate by Set-way */ - __OM uint32_t DCCMVAU; /*!< Offset: 0x264 ( /W) D-Cache Clean by MVA to PoU */ - __OM uint32_t DCCMVAC; /*!< Offset: 0x268 ( /W) D-Cache Clean by MVA to PoC */ - __OM uint32_t DCCSW; /*!< Offset: 0x26C ( /W) D-Cache Clean by Set-way */ - __OM uint32_t DCCIMVAC; /*!< Offset: 0x270 ( /W) D-Cache Clean and Invalidate by MVA to PoC */ - __OM uint32_t DCCISW; /*!< Offset: 0x274 ( /W) D-Cache Clean and Invalidate by Set-way */ - uint32_t RESERVED7[6U]; - __IOM uint32_t ITCMCR; /*!< Offset: 0x290 (R/W) Instruction Tightly-Coupled Memory Control Register */ - __IOM uint32_t DTCMCR; /*!< Offset: 0x294 (R/W) Data Tightly-Coupled Memory Control Registers */ - __IOM uint32_t AHBPCR; /*!< Offset: 0x298 (R/W) AHBP Control Register */ - __IOM uint32_t CACR; /*!< Offset: 0x29C (R/W) L1 Cache Control Register */ - __IOM uint32_t AHBSCR; /*!< Offset: 0x2A0 (R/W) AHB Slave Control Register */ - uint32_t RESERVED8[1U]; - __IOM uint32_t ABFSR; /*!< Offset: 0x2A8 (R/W) Auxiliary Bus Fault Status Register */ -} SCB_Type; - -/* SCB CPUID Register Definitions */ -#define SCB_CPUID_IMPLEMENTER_Pos 24U /*!< SCB CPUID: IMPLEMENTER Position */ -#define SCB_CPUID_IMPLEMENTER_Msk (0xFFUL << SCB_CPUID_IMPLEMENTER_Pos) /*!< SCB CPUID: IMPLEMENTER Mask */ - -#define SCB_CPUID_VARIANT_Pos 20U /*!< SCB CPUID: VARIANT Position */ -#define SCB_CPUID_VARIANT_Msk (0xFUL << SCB_CPUID_VARIANT_Pos) /*!< SCB CPUID: VARIANT Mask */ - -#define SCB_CPUID_ARCHITECTURE_Pos 16U /*!< SCB CPUID: ARCHITECTURE Position */ -#define SCB_CPUID_ARCHITECTURE_Msk (0xFUL << SCB_CPUID_ARCHITECTURE_Pos) /*!< SCB CPUID: ARCHITECTURE Mask */ - -#define SCB_CPUID_PARTNO_Pos 4U /*!< SCB CPUID: PARTNO Position */ -#define SCB_CPUID_PARTNO_Msk (0xFFFUL << SCB_CPUID_PARTNO_Pos) /*!< SCB CPUID: PARTNO Mask */ - -#define SCB_CPUID_REVISION_Pos 0U /*!< SCB CPUID: REVISION Position */ -#define SCB_CPUID_REVISION_Msk (0xFUL /*<< SCB_CPUID_REVISION_Pos*/) /*!< SCB CPUID: REVISION Mask */ - -/* SCB Interrupt Control State Register Definitions */ -#define SCB_ICSR_PENDNMISET_Pos 31U /*!< SCB ICSR: PENDNMISET Position */ -#define SCB_ICSR_PENDNMISET_Msk (1UL << SCB_ICSR_PENDNMISET_Pos) /*!< SCB ICSR: PENDNMISET Mask */ - -#define SCB_ICSR_NMIPENDSET_Pos SCB_ICSR_PENDNMISET_Pos /*!< SCB ICSR: NMIPENDSET Position, backward compatibility */ -#define SCB_ICSR_NMIPENDSET_Msk SCB_ICSR_PENDNMISET_Msk /*!< SCB ICSR: NMIPENDSET Mask, backward compatibility */ - -#define SCB_ICSR_PENDNMICLR_Pos 30U /*!< SCB ICSR: PENDNMICLR Position */ -#define SCB_ICSR_PENDNMICLR_Msk (1UL << SCB_ICSR_PENDNMICLR_Pos) /*!< SCB ICSR: PENDNMICLR Mask */ - -#define SCB_ICSR_PENDSVSET_Pos 28U /*!< SCB ICSR: PENDSVSET Position */ -#define SCB_ICSR_PENDSVSET_Msk (1UL << SCB_ICSR_PENDSVSET_Pos) /*!< SCB ICSR: PENDSVSET Mask */ - -#define SCB_ICSR_PENDSVCLR_Pos 27U /*!< SCB ICSR: PENDSVCLR Position */ -#define SCB_ICSR_PENDSVCLR_Msk (1UL << SCB_ICSR_PENDSVCLR_Pos) /*!< SCB ICSR: PENDSVCLR Mask */ - -#define SCB_ICSR_PENDSTSET_Pos 26U /*!< SCB ICSR: PENDSTSET Position */ -#define SCB_ICSR_PENDSTSET_Msk (1UL << SCB_ICSR_PENDSTSET_Pos) /*!< SCB ICSR: PENDSTSET Mask */ - -#define SCB_ICSR_PENDSTCLR_Pos 25U /*!< SCB ICSR: PENDSTCLR Position */ -#define SCB_ICSR_PENDSTCLR_Msk (1UL << SCB_ICSR_PENDSTCLR_Pos) /*!< SCB ICSR: PENDSTCLR Mask */ - -#define SCB_ICSR_STTNS_Pos 24U /*!< SCB ICSR: STTNS Position (Security Extension) */ -#define SCB_ICSR_STTNS_Msk (1UL << SCB_ICSR_STTNS_Pos) /*!< SCB ICSR: STTNS Mask (Security Extension) */ - -#define SCB_ICSR_ISRPREEMPT_Pos 23U /*!< SCB ICSR: ISRPREEMPT Position */ -#define SCB_ICSR_ISRPREEMPT_Msk (1UL << SCB_ICSR_ISRPREEMPT_Pos) /*!< SCB ICSR: ISRPREEMPT Mask */ - -#define SCB_ICSR_ISRPENDING_Pos 22U /*!< SCB ICSR: ISRPENDING Position */ -#define SCB_ICSR_ISRPENDING_Msk (1UL << SCB_ICSR_ISRPENDING_Pos) /*!< SCB ICSR: ISRPENDING Mask */ - -#define SCB_ICSR_VECTPENDING_Pos 12U /*!< SCB ICSR: VECTPENDING Position */ -#define SCB_ICSR_VECTPENDING_Msk (0x1FFUL << SCB_ICSR_VECTPENDING_Pos) /*!< SCB ICSR: VECTPENDING Mask */ - -#define SCB_ICSR_RETTOBASE_Pos 11U /*!< SCB ICSR: RETTOBASE Position */ -#define SCB_ICSR_RETTOBASE_Msk (1UL << SCB_ICSR_RETTOBASE_Pos) /*!< SCB ICSR: RETTOBASE Mask */ - -#define SCB_ICSR_VECTACTIVE_Pos 0U /*!< SCB ICSR: VECTACTIVE Position */ -#define SCB_ICSR_VECTACTIVE_Msk (0x1FFUL /*<< SCB_ICSR_VECTACTIVE_Pos*/) /*!< SCB ICSR: VECTACTIVE Mask */ - -/* SCB Vector Table Offset Register Definitions */ -#define SCB_VTOR_TBLOFF_Pos 7U /*!< SCB VTOR: TBLOFF Position */ -#define SCB_VTOR_TBLOFF_Msk (0x1FFFFFFUL << SCB_VTOR_TBLOFF_Pos) /*!< SCB VTOR: TBLOFF Mask */ - -/* SCB Application Interrupt and Reset Control Register Definitions */ -#define SCB_AIRCR_VECTKEY_Pos 16U /*!< SCB AIRCR: VECTKEY Position */ -#define SCB_AIRCR_VECTKEY_Msk (0xFFFFUL << SCB_AIRCR_VECTKEY_Pos) /*!< SCB AIRCR: VECTKEY Mask */ - -#define SCB_AIRCR_VECTKEYSTAT_Pos 16U /*!< SCB AIRCR: VECTKEYSTAT Position */ -#define SCB_AIRCR_VECTKEYSTAT_Msk (0xFFFFUL << SCB_AIRCR_VECTKEYSTAT_Pos) /*!< SCB AIRCR: VECTKEYSTAT Mask */ - -#define SCB_AIRCR_ENDIANESS_Pos 15U /*!< SCB AIRCR: ENDIANESS Position */ -#define SCB_AIRCR_ENDIANESS_Msk (1UL << SCB_AIRCR_ENDIANESS_Pos) /*!< SCB AIRCR: ENDIANESS Mask */ - -#define SCB_AIRCR_PRIS_Pos 14U /*!< SCB AIRCR: PRIS Position */ -#define SCB_AIRCR_PRIS_Msk (1UL << SCB_AIRCR_PRIS_Pos) /*!< SCB AIRCR: PRIS Mask */ - -#define SCB_AIRCR_BFHFNMINS_Pos 13U /*!< SCB AIRCR: BFHFNMINS Position */ -#define SCB_AIRCR_BFHFNMINS_Msk (1UL << SCB_AIRCR_BFHFNMINS_Pos) /*!< SCB AIRCR: BFHFNMINS Mask */ - -#define SCB_AIRCR_PRIGROUP_Pos 8U /*!< SCB AIRCR: PRIGROUP Position */ -#define SCB_AIRCR_PRIGROUP_Msk (7UL << SCB_AIRCR_PRIGROUP_Pos) /*!< SCB AIRCR: PRIGROUP Mask */ - -#define SCB_AIRCR_SYSRESETREQS_Pos 3U /*!< SCB AIRCR: SYSRESETREQS Position */ -#define SCB_AIRCR_SYSRESETREQS_Msk (1UL << SCB_AIRCR_SYSRESETREQS_Pos) /*!< SCB AIRCR: SYSRESETREQS Mask */ - -#define SCB_AIRCR_SYSRESETREQ_Pos 2U /*!< SCB AIRCR: SYSRESETREQ Position */ -#define SCB_AIRCR_SYSRESETREQ_Msk (1UL << SCB_AIRCR_SYSRESETREQ_Pos) /*!< SCB AIRCR: SYSRESETREQ Mask */ - -#define SCB_AIRCR_VECTCLRACTIVE_Pos 1U /*!< SCB AIRCR: VECTCLRACTIVE Position */ -#define SCB_AIRCR_VECTCLRACTIVE_Msk (1UL << SCB_AIRCR_VECTCLRACTIVE_Pos) /*!< SCB AIRCR: VECTCLRACTIVE Mask */ - -/* SCB System Control Register Definitions */ -#define SCB_SCR_SEVONPEND_Pos 4U /*!< SCB SCR: SEVONPEND Position */ -#define SCB_SCR_SEVONPEND_Msk (1UL << SCB_SCR_SEVONPEND_Pos) /*!< SCB SCR: SEVONPEND Mask */ - -#define SCB_SCR_SLEEPDEEPS_Pos 3U /*!< SCB SCR: SLEEPDEEPS Position */ -#define SCB_SCR_SLEEPDEEPS_Msk (1UL << SCB_SCR_SLEEPDEEPS_Pos) /*!< SCB SCR: SLEEPDEEPS Mask */ - -#define SCB_SCR_SLEEPDEEP_Pos 2U /*!< SCB SCR: SLEEPDEEP Position */ -#define SCB_SCR_SLEEPDEEP_Msk (1UL << SCB_SCR_SLEEPDEEP_Pos) /*!< SCB SCR: SLEEPDEEP Mask */ - -#define SCB_SCR_SLEEPONEXIT_Pos 1U /*!< SCB SCR: SLEEPONEXIT Position */ -#define SCB_SCR_SLEEPONEXIT_Msk (1UL << SCB_SCR_SLEEPONEXIT_Pos) /*!< SCB SCR: SLEEPONEXIT Mask */ - -/* SCB Configuration Control Register Definitions */ -#define SCB_CCR_BP_Pos 18U /*!< SCB CCR: BP Position */ -#define SCB_CCR_BP_Msk (1UL << SCB_CCR_BP_Pos) /*!< SCB CCR: BP Mask */ - -#define SCB_CCR_IC_Pos 17U /*!< SCB CCR: IC Position */ -#define SCB_CCR_IC_Msk (1UL << SCB_CCR_IC_Pos) /*!< SCB CCR: IC Mask */ - -#define SCB_CCR_DC_Pos 16U /*!< SCB CCR: DC Position */ -#define SCB_CCR_DC_Msk (1UL << SCB_CCR_DC_Pos) /*!< SCB CCR: DC Mask */ - -#define SCB_CCR_STKOFHFNMIGN_Pos 10U /*!< SCB CCR: STKOFHFNMIGN Position */ -#define SCB_CCR_STKOFHFNMIGN_Msk (1UL << SCB_CCR_STKOFHFNMIGN_Pos) /*!< SCB CCR: STKOFHFNMIGN Mask */ - -#define SCB_CCR_BFHFNMIGN_Pos 8U /*!< SCB CCR: BFHFNMIGN Position */ -#define SCB_CCR_BFHFNMIGN_Msk (1UL << SCB_CCR_BFHFNMIGN_Pos) /*!< SCB CCR: BFHFNMIGN Mask */ - -#define SCB_CCR_DIV_0_TRP_Pos 4U /*!< SCB CCR: DIV_0_TRP Position */ -#define SCB_CCR_DIV_0_TRP_Msk (1UL << SCB_CCR_DIV_0_TRP_Pos) /*!< SCB CCR: DIV_0_TRP Mask */ - -#define SCB_CCR_UNALIGN_TRP_Pos 3U /*!< SCB CCR: UNALIGN_TRP Position */ -#define SCB_CCR_UNALIGN_TRP_Msk (1UL << SCB_CCR_UNALIGN_TRP_Pos) /*!< SCB CCR: UNALIGN_TRP Mask */ - -#define SCB_CCR_USERSETMPEND_Pos 1U /*!< SCB CCR: USERSETMPEND Position */ -#define SCB_CCR_USERSETMPEND_Msk (1UL << SCB_CCR_USERSETMPEND_Pos) /*!< SCB CCR: USERSETMPEND Mask */ - -/* SCB System Handler Control and State Register Definitions */ -#define SCB_SHCSR_HARDFAULTPENDED_Pos 21U /*!< SCB SHCSR: HARDFAULTPENDED Position */ -#define SCB_SHCSR_HARDFAULTPENDED_Msk (1UL << SCB_SHCSR_HARDFAULTPENDED_Pos) /*!< SCB SHCSR: HARDFAULTPENDED Mask */ - -#define SCB_SHCSR_SECUREFAULTPENDED_Pos 20U /*!< SCB SHCSR: SECUREFAULTPENDED Position */ -#define SCB_SHCSR_SECUREFAULTPENDED_Msk (1UL << SCB_SHCSR_SECUREFAULTPENDED_Pos) /*!< SCB SHCSR: SECUREFAULTPENDED Mask */ - -#define SCB_SHCSR_SECUREFAULTENA_Pos 19U /*!< SCB SHCSR: SECUREFAULTENA Position */ -#define SCB_SHCSR_SECUREFAULTENA_Msk (1UL << SCB_SHCSR_SECUREFAULTENA_Pos) /*!< SCB SHCSR: SECUREFAULTENA Mask */ - -#define SCB_SHCSR_USGFAULTENA_Pos 18U /*!< SCB SHCSR: USGFAULTENA Position */ -#define SCB_SHCSR_USGFAULTENA_Msk (1UL << SCB_SHCSR_USGFAULTENA_Pos) /*!< SCB SHCSR: USGFAULTENA Mask */ - -#define SCB_SHCSR_BUSFAULTENA_Pos 17U /*!< SCB SHCSR: BUSFAULTENA Position */ -#define SCB_SHCSR_BUSFAULTENA_Msk (1UL << SCB_SHCSR_BUSFAULTENA_Pos) /*!< SCB SHCSR: BUSFAULTENA Mask */ - -#define SCB_SHCSR_MEMFAULTENA_Pos 16U /*!< SCB SHCSR: MEMFAULTENA Position */ -#define SCB_SHCSR_MEMFAULTENA_Msk (1UL << SCB_SHCSR_MEMFAULTENA_Pos) /*!< SCB SHCSR: MEMFAULTENA Mask */ - -#define SCB_SHCSR_SVCALLPENDED_Pos 15U /*!< SCB SHCSR: SVCALLPENDED Position */ -#define SCB_SHCSR_SVCALLPENDED_Msk (1UL << SCB_SHCSR_SVCALLPENDED_Pos) /*!< SCB SHCSR: SVCALLPENDED Mask */ - -#define SCB_SHCSR_BUSFAULTPENDED_Pos 14U /*!< SCB SHCSR: BUSFAULTPENDED Position */ -#define SCB_SHCSR_BUSFAULTPENDED_Msk (1UL << SCB_SHCSR_BUSFAULTPENDED_Pos) /*!< SCB SHCSR: BUSFAULTPENDED Mask */ - -#define SCB_SHCSR_MEMFAULTPENDED_Pos 13U /*!< SCB SHCSR: MEMFAULTPENDED Position */ -#define SCB_SHCSR_MEMFAULTPENDED_Msk (1UL << SCB_SHCSR_MEMFAULTPENDED_Pos) /*!< SCB SHCSR: MEMFAULTPENDED Mask */ - -#define SCB_SHCSR_USGFAULTPENDED_Pos 12U /*!< SCB SHCSR: USGFAULTPENDED Position */ -#define SCB_SHCSR_USGFAULTPENDED_Msk (1UL << SCB_SHCSR_USGFAULTPENDED_Pos) /*!< SCB SHCSR: USGFAULTPENDED Mask */ - -#define SCB_SHCSR_SYSTICKACT_Pos 11U /*!< SCB SHCSR: SYSTICKACT Position */ -#define SCB_SHCSR_SYSTICKACT_Msk (1UL << SCB_SHCSR_SYSTICKACT_Pos) /*!< SCB SHCSR: SYSTICKACT Mask */ - -#define SCB_SHCSR_PENDSVACT_Pos 10U /*!< SCB SHCSR: PENDSVACT Position */ -#define SCB_SHCSR_PENDSVACT_Msk (1UL << SCB_SHCSR_PENDSVACT_Pos) /*!< SCB SHCSR: PENDSVACT Mask */ - -#define SCB_SHCSR_MONITORACT_Pos 8U /*!< SCB SHCSR: MONITORACT Position */ -#define SCB_SHCSR_MONITORACT_Msk (1UL << SCB_SHCSR_MONITORACT_Pos) /*!< SCB SHCSR: MONITORACT Mask */ - -#define SCB_SHCSR_SVCALLACT_Pos 7U /*!< SCB SHCSR: SVCALLACT Position */ -#define SCB_SHCSR_SVCALLACT_Msk (1UL << SCB_SHCSR_SVCALLACT_Pos) /*!< SCB SHCSR: SVCALLACT Mask */ - -#define SCB_SHCSR_NMIACT_Pos 5U /*!< SCB SHCSR: NMIACT Position */ -#define SCB_SHCSR_NMIACT_Msk (1UL << SCB_SHCSR_NMIACT_Pos) /*!< SCB SHCSR: NMIACT Mask */ - -#define SCB_SHCSR_SECUREFAULTACT_Pos 4U /*!< SCB SHCSR: SECUREFAULTACT Position */ -#define SCB_SHCSR_SECUREFAULTACT_Msk (1UL << SCB_SHCSR_SECUREFAULTACT_Pos) /*!< SCB SHCSR: SECUREFAULTACT Mask */ - -#define SCB_SHCSR_USGFAULTACT_Pos 3U /*!< SCB SHCSR: USGFAULTACT Position */ -#define SCB_SHCSR_USGFAULTACT_Msk (1UL << SCB_SHCSR_USGFAULTACT_Pos) /*!< SCB SHCSR: USGFAULTACT Mask */ - -#define SCB_SHCSR_HARDFAULTACT_Pos 2U /*!< SCB SHCSR: HARDFAULTACT Position */ -#define SCB_SHCSR_HARDFAULTACT_Msk (1UL << SCB_SHCSR_HARDFAULTACT_Pos) /*!< SCB SHCSR: HARDFAULTACT Mask */ - -#define SCB_SHCSR_BUSFAULTACT_Pos 1U /*!< SCB SHCSR: BUSFAULTACT Position */ -#define SCB_SHCSR_BUSFAULTACT_Msk (1UL << SCB_SHCSR_BUSFAULTACT_Pos) /*!< SCB SHCSR: BUSFAULTACT Mask */ - -#define SCB_SHCSR_MEMFAULTACT_Pos 0U /*!< SCB SHCSR: MEMFAULTACT Position */ -#define SCB_SHCSR_MEMFAULTACT_Msk (1UL /*<< SCB_SHCSR_MEMFAULTACT_Pos*/) /*!< SCB SHCSR: MEMFAULTACT Mask */ - -/* SCB Configurable Fault Status Register Definitions */ -#define SCB_CFSR_USGFAULTSR_Pos 16U /*!< SCB CFSR: Usage Fault Status Register Position */ -#define SCB_CFSR_USGFAULTSR_Msk (0xFFFFUL << SCB_CFSR_USGFAULTSR_Pos) /*!< SCB CFSR: Usage Fault Status Register Mask */ - -#define SCB_CFSR_BUSFAULTSR_Pos 8U /*!< SCB CFSR: Bus Fault Status Register Position */ -#define SCB_CFSR_BUSFAULTSR_Msk (0xFFUL << SCB_CFSR_BUSFAULTSR_Pos) /*!< SCB CFSR: Bus Fault Status Register Mask */ - -#define SCB_CFSR_MEMFAULTSR_Pos 0U /*!< SCB CFSR: Memory Manage Fault Status Register Position */ -#define SCB_CFSR_MEMFAULTSR_Msk (0xFFUL /*<< SCB_CFSR_MEMFAULTSR_Pos*/) /*!< SCB CFSR: Memory Manage Fault Status Register Mask */ - -/* MemManage Fault Status Register (part of SCB Configurable Fault Status Register) */ -#define SCB_CFSR_MMARVALID_Pos (SCB_SHCSR_MEMFAULTACT_Pos + 7U) /*!< SCB CFSR (MMFSR): MMARVALID Position */ -#define SCB_CFSR_MMARVALID_Msk (1UL << SCB_CFSR_MMARVALID_Pos) /*!< SCB CFSR (MMFSR): MMARVALID Mask */ - -#define SCB_CFSR_MLSPERR_Pos (SCB_SHCSR_MEMFAULTACT_Pos + 5U) /*!< SCB CFSR (MMFSR): MLSPERR Position */ -#define SCB_CFSR_MLSPERR_Msk (1UL << SCB_CFSR_MLSPERR_Pos) /*!< SCB CFSR (MMFSR): MLSPERR Mask */ - -#define SCB_CFSR_MSTKERR_Pos (SCB_SHCSR_MEMFAULTACT_Pos + 4U) /*!< SCB CFSR (MMFSR): MSTKERR Position */ -#define SCB_CFSR_MSTKERR_Msk (1UL << SCB_CFSR_MSTKERR_Pos) /*!< SCB CFSR (MMFSR): MSTKERR Mask */ - -#define SCB_CFSR_MUNSTKERR_Pos (SCB_SHCSR_MEMFAULTACT_Pos + 3U) /*!< SCB CFSR (MMFSR): MUNSTKERR Position */ -#define SCB_CFSR_MUNSTKERR_Msk (1UL << SCB_CFSR_MUNSTKERR_Pos) /*!< SCB CFSR (MMFSR): MUNSTKERR Mask */ - -#define SCB_CFSR_DACCVIOL_Pos (SCB_SHCSR_MEMFAULTACT_Pos + 1U) /*!< SCB CFSR (MMFSR): DACCVIOL Position */ -#define SCB_CFSR_DACCVIOL_Msk (1UL << SCB_CFSR_DACCVIOL_Pos) /*!< SCB CFSR (MMFSR): DACCVIOL Mask */ - -#define SCB_CFSR_IACCVIOL_Pos (SCB_SHCSR_MEMFAULTACT_Pos + 0U) /*!< SCB CFSR (MMFSR): IACCVIOL Position */ -#define SCB_CFSR_IACCVIOL_Msk (1UL /*<< SCB_CFSR_IACCVIOL_Pos*/) /*!< SCB CFSR (MMFSR): IACCVIOL Mask */ - -/* BusFault Status Register (part of SCB Configurable Fault Status Register) */ -#define SCB_CFSR_BFARVALID_Pos (SCB_CFSR_BUSFAULTSR_Pos + 7U) /*!< SCB CFSR (BFSR): BFARVALID Position */ -#define SCB_CFSR_BFARVALID_Msk (1UL << SCB_CFSR_BFARVALID_Pos) /*!< SCB CFSR (BFSR): BFARVALID Mask */ - -#define SCB_CFSR_LSPERR_Pos (SCB_CFSR_BUSFAULTSR_Pos + 5U) /*!< SCB CFSR (BFSR): LSPERR Position */ -#define SCB_CFSR_LSPERR_Msk (1UL << SCB_CFSR_LSPERR_Pos) /*!< SCB CFSR (BFSR): LSPERR Mask */ - -#define SCB_CFSR_STKERR_Pos (SCB_CFSR_BUSFAULTSR_Pos + 4U) /*!< SCB CFSR (BFSR): STKERR Position */ -#define SCB_CFSR_STKERR_Msk (1UL << SCB_CFSR_STKERR_Pos) /*!< SCB CFSR (BFSR): STKERR Mask */ - -#define SCB_CFSR_UNSTKERR_Pos (SCB_CFSR_BUSFAULTSR_Pos + 3U) /*!< SCB CFSR (BFSR): UNSTKERR Position */ -#define SCB_CFSR_UNSTKERR_Msk (1UL << SCB_CFSR_UNSTKERR_Pos) /*!< SCB CFSR (BFSR): UNSTKERR Mask */ - -#define SCB_CFSR_IMPRECISERR_Pos (SCB_CFSR_BUSFAULTSR_Pos + 2U) /*!< SCB CFSR (BFSR): IMPRECISERR Position */ -#define SCB_CFSR_IMPRECISERR_Msk (1UL << SCB_CFSR_IMPRECISERR_Pos) /*!< SCB CFSR (BFSR): IMPRECISERR Mask */ - -#define SCB_CFSR_PRECISERR_Pos (SCB_CFSR_BUSFAULTSR_Pos + 1U) /*!< SCB CFSR (BFSR): PRECISERR Position */ -#define SCB_CFSR_PRECISERR_Msk (1UL << SCB_CFSR_PRECISERR_Pos) /*!< SCB CFSR (BFSR): PRECISERR Mask */ - -#define SCB_CFSR_IBUSERR_Pos (SCB_CFSR_BUSFAULTSR_Pos + 0U) /*!< SCB CFSR (BFSR): IBUSERR Position */ -#define SCB_CFSR_IBUSERR_Msk (1UL << SCB_CFSR_IBUSERR_Pos) /*!< SCB CFSR (BFSR): IBUSERR Mask */ - -/* UsageFault Status Register (part of SCB Configurable Fault Status Register) */ -#define SCB_CFSR_DIVBYZERO_Pos (SCB_CFSR_USGFAULTSR_Pos + 9U) /*!< SCB CFSR (UFSR): DIVBYZERO Position */ -#define SCB_CFSR_DIVBYZERO_Msk (1UL << SCB_CFSR_DIVBYZERO_Pos) /*!< SCB CFSR (UFSR): DIVBYZERO Mask */ - -#define SCB_CFSR_UNALIGNED_Pos (SCB_CFSR_USGFAULTSR_Pos + 8U) /*!< SCB CFSR (UFSR): UNALIGNED Position */ -#define SCB_CFSR_UNALIGNED_Msk (1UL << SCB_CFSR_UNALIGNED_Pos) /*!< SCB CFSR (UFSR): UNALIGNED Mask */ - -#define SCB_CFSR_STKOF_Pos (SCB_CFSR_USGFAULTSR_Pos + 4U) /*!< SCB CFSR (UFSR): STKOF Position */ -#define SCB_CFSR_STKOF_Msk (1UL << SCB_CFSR_STKOF_Pos) /*!< SCB CFSR (UFSR): STKOF Mask */ - -#define SCB_CFSR_NOCP_Pos (SCB_CFSR_USGFAULTSR_Pos + 3U) /*!< SCB CFSR (UFSR): NOCP Position */ -#define SCB_CFSR_NOCP_Msk (1UL << SCB_CFSR_NOCP_Pos) /*!< SCB CFSR (UFSR): NOCP Mask */ - -#define SCB_CFSR_INVPC_Pos (SCB_CFSR_USGFAULTSR_Pos + 2U) /*!< SCB CFSR (UFSR): INVPC Position */ -#define SCB_CFSR_INVPC_Msk (1UL << SCB_CFSR_INVPC_Pos) /*!< SCB CFSR (UFSR): INVPC Mask */ - -#define SCB_CFSR_INVSTATE_Pos (SCB_CFSR_USGFAULTSR_Pos + 1U) /*!< SCB CFSR (UFSR): INVSTATE Position */ -#define SCB_CFSR_INVSTATE_Msk (1UL << SCB_CFSR_INVSTATE_Pos) /*!< SCB CFSR (UFSR): INVSTATE Mask */ - -#define SCB_CFSR_UNDEFINSTR_Pos (SCB_CFSR_USGFAULTSR_Pos + 0U) /*!< SCB CFSR (UFSR): UNDEFINSTR Position */ -#define SCB_CFSR_UNDEFINSTR_Msk (1UL << SCB_CFSR_UNDEFINSTR_Pos) /*!< SCB CFSR (UFSR): UNDEFINSTR Mask */ - -/* SCB Hard Fault Status Register Definitions */ -#define SCB_HFSR_DEBUGEVT_Pos 31U /*!< SCB HFSR: DEBUGEVT Position */ -#define SCB_HFSR_DEBUGEVT_Msk (1UL << SCB_HFSR_DEBUGEVT_Pos) /*!< SCB HFSR: DEBUGEVT Mask */ - -#define SCB_HFSR_FORCED_Pos 30U /*!< SCB HFSR: FORCED Position */ -#define SCB_HFSR_FORCED_Msk (1UL << SCB_HFSR_FORCED_Pos) /*!< SCB HFSR: FORCED Mask */ - -#define SCB_HFSR_VECTTBL_Pos 1U /*!< SCB HFSR: VECTTBL Position */ -#define SCB_HFSR_VECTTBL_Msk (1UL << SCB_HFSR_VECTTBL_Pos) /*!< SCB HFSR: VECTTBL Mask */ - -/* SCB Debug Fault Status Register Definitions */ -#define SCB_DFSR_EXTERNAL_Pos 4U /*!< SCB DFSR: EXTERNAL Position */ -#define SCB_DFSR_EXTERNAL_Msk (1UL << SCB_DFSR_EXTERNAL_Pos) /*!< SCB DFSR: EXTERNAL Mask */ - -#define SCB_DFSR_VCATCH_Pos 3U /*!< SCB DFSR: VCATCH Position */ -#define SCB_DFSR_VCATCH_Msk (1UL << SCB_DFSR_VCATCH_Pos) /*!< SCB DFSR: VCATCH Mask */ - -#define SCB_DFSR_DWTTRAP_Pos 2U /*!< SCB DFSR: DWTTRAP Position */ -#define SCB_DFSR_DWTTRAP_Msk (1UL << SCB_DFSR_DWTTRAP_Pos) /*!< SCB DFSR: DWTTRAP Mask */ - -#define SCB_DFSR_BKPT_Pos 1U /*!< SCB DFSR: BKPT Position */ -#define SCB_DFSR_BKPT_Msk (1UL << SCB_DFSR_BKPT_Pos) /*!< SCB DFSR: BKPT Mask */ - -#define SCB_DFSR_HALTED_Pos 0U /*!< SCB DFSR: HALTED Position */ -#define SCB_DFSR_HALTED_Msk (1UL /*<< SCB_DFSR_HALTED_Pos*/) /*!< SCB DFSR: HALTED Mask */ - -/* SCB Non-Secure Access Control Register Definitions */ -#define SCB_NSACR_CP11_Pos 11U /*!< SCB NSACR: CP11 Position */ -#define SCB_NSACR_CP11_Msk (1UL << SCB_NSACR_CP11_Pos) /*!< SCB NSACR: CP11 Mask */ - -#define SCB_NSACR_CP10_Pos 10U /*!< SCB NSACR: CP10 Position */ -#define SCB_NSACR_CP10_Msk (1UL << SCB_NSACR_CP10_Pos) /*!< SCB NSACR: CP10 Mask */ - -#define SCB_NSACR_CPn_Pos 0U /*!< SCB NSACR: CPn Position */ -#define SCB_NSACR_CPn_Msk (1UL /*<< SCB_NSACR_CPn_Pos*/) /*!< SCB NSACR: CPn Mask */ - -/* SCB Cache Level ID Register Definitions */ -#define SCB_CLIDR_LOUU_Pos 27U /*!< SCB CLIDR: LoUU Position */ -#define SCB_CLIDR_LOUU_Msk (7UL << SCB_CLIDR_LOUU_Pos) /*!< SCB CLIDR: LoUU Mask */ - -#define SCB_CLIDR_LOC_Pos 24U /*!< SCB CLIDR: LoC Position */ -#define SCB_CLIDR_LOC_Msk (7UL << SCB_CLIDR_LOC_Pos) /*!< SCB CLIDR: LoC Mask */ - -/* SCB Cache Type Register Definitions */ -#define SCB_CTR_FORMAT_Pos 29U /*!< SCB CTR: Format Position */ -#define SCB_CTR_FORMAT_Msk (7UL << SCB_CTR_FORMAT_Pos) /*!< SCB CTR: Format Mask */ - -#define SCB_CTR_CWG_Pos 24U /*!< SCB CTR: CWG Position */ -#define SCB_CTR_CWG_Msk (0xFUL << SCB_CTR_CWG_Pos) /*!< SCB CTR: CWG Mask */ - -#define SCB_CTR_ERG_Pos 20U /*!< SCB CTR: ERG Position */ -#define SCB_CTR_ERG_Msk (0xFUL << SCB_CTR_ERG_Pos) /*!< SCB CTR: ERG Mask */ - -#define SCB_CTR_DMINLINE_Pos 16U /*!< SCB CTR: DminLine Position */ -#define SCB_CTR_DMINLINE_Msk (0xFUL << SCB_CTR_DMINLINE_Pos) /*!< SCB CTR: DminLine Mask */ - -#define SCB_CTR_IMINLINE_Pos 0U /*!< SCB CTR: ImInLine Position */ -#define SCB_CTR_IMINLINE_Msk (0xFUL /*<< SCB_CTR_IMINLINE_Pos*/) /*!< SCB CTR: ImInLine Mask */ - -/* SCB Cache Size ID Register Definitions */ -#define SCB_CCSIDR_WT_Pos 31U /*!< SCB CCSIDR: WT Position */ -#define SCB_CCSIDR_WT_Msk (1UL << SCB_CCSIDR_WT_Pos) /*!< SCB CCSIDR: WT Mask */ - -#define SCB_CCSIDR_WB_Pos 30U /*!< SCB CCSIDR: WB Position */ -#define SCB_CCSIDR_WB_Msk (1UL << SCB_CCSIDR_WB_Pos) /*!< SCB CCSIDR: WB Mask */ - -#define SCB_CCSIDR_RA_Pos 29U /*!< SCB CCSIDR: RA Position */ -#define SCB_CCSIDR_RA_Msk (1UL << SCB_CCSIDR_RA_Pos) /*!< SCB CCSIDR: RA Mask */ - -#define SCB_CCSIDR_WA_Pos 28U /*!< SCB CCSIDR: WA Position */ -#define SCB_CCSIDR_WA_Msk (1UL << SCB_CCSIDR_WA_Pos) /*!< SCB CCSIDR: WA Mask */ - -#define SCB_CCSIDR_NUMSETS_Pos 13U /*!< SCB CCSIDR: NumSets Position */ -#define SCB_CCSIDR_NUMSETS_Msk (0x7FFFUL << SCB_CCSIDR_NUMSETS_Pos) /*!< SCB CCSIDR: NumSets Mask */ - -#define SCB_CCSIDR_ASSOCIATIVITY_Pos 3U /*!< SCB CCSIDR: Associativity Position */ -#define SCB_CCSIDR_ASSOCIATIVITY_Msk (0x3FFUL << SCB_CCSIDR_ASSOCIATIVITY_Pos) /*!< SCB CCSIDR: Associativity Mask */ - -#define SCB_CCSIDR_LINESIZE_Pos 0U /*!< SCB CCSIDR: LineSize Position */ -#define SCB_CCSIDR_LINESIZE_Msk (7UL /*<< SCB_CCSIDR_LINESIZE_Pos*/) /*!< SCB CCSIDR: LineSize Mask */ - -/* SCB Cache Size Selection Register Definitions */ -#define SCB_CSSELR_LEVEL_Pos 1U /*!< SCB CSSELR: Level Position */ -#define SCB_CSSELR_LEVEL_Msk (7UL << SCB_CSSELR_LEVEL_Pos) /*!< SCB CSSELR: Level Mask */ - -#define SCB_CSSELR_IND_Pos 0U /*!< SCB CSSELR: InD Position */ -#define SCB_CSSELR_IND_Msk (1UL /*<< SCB_CSSELR_IND_Pos*/) /*!< SCB CSSELR: InD Mask */ - -/* SCB Software Triggered Interrupt Register Definitions */ -#define SCB_STIR_INTID_Pos 0U /*!< SCB STIR: INTID Position */ -#define SCB_STIR_INTID_Msk (0x1FFUL /*<< SCB_STIR_INTID_Pos*/) /*!< SCB STIR: INTID Mask */ - -/* SCB D-Cache Invalidate by Set-way Register Definitions */ -#define SCB_DCISW_WAY_Pos 30U /*!< SCB DCISW: Way Position */ -#define SCB_DCISW_WAY_Msk (3UL << SCB_DCISW_WAY_Pos) /*!< SCB DCISW: Way Mask */ - -#define SCB_DCISW_SET_Pos 5U /*!< SCB DCISW: Set Position */ -#define SCB_DCISW_SET_Msk (0x1FFUL << SCB_DCISW_SET_Pos) /*!< SCB DCISW: Set Mask */ - -/* SCB D-Cache Clean by Set-way Register Definitions */ -#define SCB_DCCSW_WAY_Pos 30U /*!< SCB DCCSW: Way Position */ -#define SCB_DCCSW_WAY_Msk (3UL << SCB_DCCSW_WAY_Pos) /*!< SCB DCCSW: Way Mask */ - -#define SCB_DCCSW_SET_Pos 5U /*!< SCB DCCSW: Set Position */ -#define SCB_DCCSW_SET_Msk (0x1FFUL << SCB_DCCSW_SET_Pos) /*!< SCB DCCSW: Set Mask */ - -/* SCB D-Cache Clean and Invalidate by Set-way Register Definitions */ -#define SCB_DCCISW_WAY_Pos 30U /*!< SCB DCCISW: Way Position */ -#define SCB_DCCISW_WAY_Msk (3UL << SCB_DCCISW_WAY_Pos) /*!< SCB DCCISW: Way Mask */ - -#define SCB_DCCISW_SET_Pos 5U /*!< SCB DCCISW: Set Position */ -#define SCB_DCCISW_SET_Msk (0x1FFUL << SCB_DCCISW_SET_Pos) /*!< SCB DCCISW: Set Mask */ - -/* Instruction Tightly-Coupled Memory Control Register Definitions */ -#define SCB_ITCMCR_SZ_Pos 3U /*!< SCB ITCMCR: SZ Position */ -#define SCB_ITCMCR_SZ_Msk (0xFUL << SCB_ITCMCR_SZ_Pos) /*!< SCB ITCMCR: SZ Mask */ - -#define SCB_ITCMCR_RETEN_Pos 2U /*!< SCB ITCMCR: RETEN Position */ -#define SCB_ITCMCR_RETEN_Msk (1UL << SCB_ITCMCR_RETEN_Pos) /*!< SCB ITCMCR: RETEN Mask */ - -#define SCB_ITCMCR_RMW_Pos 1U /*!< SCB ITCMCR: RMW Position */ -#define SCB_ITCMCR_RMW_Msk (1UL << SCB_ITCMCR_RMW_Pos) /*!< SCB ITCMCR: RMW Mask */ - -#define SCB_ITCMCR_EN_Pos 0U /*!< SCB ITCMCR: EN Position */ -#define SCB_ITCMCR_EN_Msk (1UL /*<< SCB_ITCMCR_EN_Pos*/) /*!< SCB ITCMCR: EN Mask */ - -/* Data Tightly-Coupled Memory Control Register Definitions */ -#define SCB_DTCMCR_SZ_Pos 3U /*!< SCB DTCMCR: SZ Position */ -#define SCB_DTCMCR_SZ_Msk (0xFUL << SCB_DTCMCR_SZ_Pos) /*!< SCB DTCMCR: SZ Mask */ - -#define SCB_DTCMCR_RETEN_Pos 2U /*!< SCB DTCMCR: RETEN Position */ -#define SCB_DTCMCR_RETEN_Msk (1UL << SCB_DTCMCR_RETEN_Pos) /*!< SCB DTCMCR: RETEN Mask */ - -#define SCB_DTCMCR_RMW_Pos 1U /*!< SCB DTCMCR: RMW Position */ -#define SCB_DTCMCR_RMW_Msk (1UL << SCB_DTCMCR_RMW_Pos) /*!< SCB DTCMCR: RMW Mask */ - -#define SCB_DTCMCR_EN_Pos 0U /*!< SCB DTCMCR: EN Position */ -#define SCB_DTCMCR_EN_Msk (1UL /*<< SCB_DTCMCR_EN_Pos*/) /*!< SCB DTCMCR: EN Mask */ - -/* AHBP Control Register Definitions */ -#define SCB_AHBPCR_SZ_Pos 1U /*!< SCB AHBPCR: SZ Position */ -#define SCB_AHBPCR_SZ_Msk (7UL << SCB_AHBPCR_SZ_Pos) /*!< SCB AHBPCR: SZ Mask */ - -#define SCB_AHBPCR_EN_Pos 0U /*!< SCB AHBPCR: EN Position */ -#define SCB_AHBPCR_EN_Msk (1UL /*<< SCB_AHBPCR_EN_Pos*/) /*!< SCB AHBPCR: EN Mask */ - -/* L1 Cache Control Register Definitions */ -#define SCB_CACR_FORCEWT_Pos 2U /*!< SCB CACR: FORCEWT Position */ -#define SCB_CACR_FORCEWT_Msk (1UL << SCB_CACR_FORCEWT_Pos) /*!< SCB CACR: FORCEWT Mask */ - -#define SCB_CACR_ECCEN_Pos 1U /*!< SCB CACR: ECCEN Position */ -#define SCB_CACR_ECCEN_Msk (1UL << SCB_CACR_ECCEN_Pos) /*!< SCB CACR: ECCEN Mask */ - -#define SCB_CACR_SIWT_Pos 0U /*!< SCB CACR: SIWT Position */ -#define SCB_CACR_SIWT_Msk (1UL /*<< SCB_CACR_SIWT_Pos*/) /*!< SCB CACR: SIWT Mask */ - -/* AHBS Control Register Definitions */ -#define SCB_AHBSCR_INITCOUNT_Pos 11U /*!< SCB AHBSCR: INITCOUNT Position */ -#define SCB_AHBSCR_INITCOUNT_Msk (0x1FUL << SCB_AHBPCR_INITCOUNT_Pos) /*!< SCB AHBSCR: INITCOUNT Mask */ - -#define SCB_AHBSCR_TPRI_Pos 2U /*!< SCB AHBSCR: TPRI Position */ -#define SCB_AHBSCR_TPRI_Msk (0x1FFUL << SCB_AHBPCR_TPRI_Pos) /*!< SCB AHBSCR: TPRI Mask */ - -#define SCB_AHBSCR_CTL_Pos 0U /*!< SCB AHBSCR: CTL Position*/ -#define SCB_AHBSCR_CTL_Msk (3UL /*<< SCB_AHBPCR_CTL_Pos*/) /*!< SCB AHBSCR: CTL Mask */ - -/* Auxiliary Bus Fault Status Register Definitions */ -#define SCB_ABFSR_AXIMTYPE_Pos 8U /*!< SCB ABFSR: AXIMTYPE Position*/ -#define SCB_ABFSR_AXIMTYPE_Msk (3UL << SCB_ABFSR_AXIMTYPE_Pos) /*!< SCB ABFSR: AXIMTYPE Mask */ - -#define SCB_ABFSR_EPPB_Pos 4U /*!< SCB ABFSR: EPPB Position*/ -#define SCB_ABFSR_EPPB_Msk (1UL << SCB_ABFSR_EPPB_Pos) /*!< SCB ABFSR: EPPB Mask */ - -#define SCB_ABFSR_AXIM_Pos 3U /*!< SCB ABFSR: AXIM Position*/ -#define SCB_ABFSR_AXIM_Msk (1UL << SCB_ABFSR_AXIM_Pos) /*!< SCB ABFSR: AXIM Mask */ - -#define SCB_ABFSR_AHBP_Pos 2U /*!< SCB ABFSR: AHBP Position*/ -#define SCB_ABFSR_AHBP_Msk (1UL << SCB_ABFSR_AHBP_Pos) /*!< SCB ABFSR: AHBP Mask */ - -#define SCB_ABFSR_DTCM_Pos 1U /*!< SCB ABFSR: DTCM Position*/ -#define SCB_ABFSR_DTCM_Msk (1UL << SCB_ABFSR_DTCM_Pos) /*!< SCB ABFSR: DTCM Mask */ - -#define SCB_ABFSR_ITCM_Pos 0U /*!< SCB ABFSR: ITCM Position*/ -#define SCB_ABFSR_ITCM_Msk (1UL /*<< SCB_ABFSR_ITCM_Pos*/) /*!< SCB ABFSR: ITCM Mask */ - -/*@} end of group CMSIS_SCB */ - - -/** - \ingroup CMSIS_core_register - \defgroup CMSIS_SCnSCB System Controls not in SCB (SCnSCB) - \brief Type definitions for the System Control and ID Register not in the SCB - @{ - */ - -/** - \brief Structure type to access the System Control and ID Register not in the SCB. - */ -typedef struct -{ - uint32_t RESERVED0[1U]; - __IM uint32_t ICTR; /*!< Offset: 0x004 (R/ ) Interrupt Controller Type Register */ - __IOM uint32_t ACTLR; /*!< Offset: 0x008 (R/W) Auxiliary Control Register */ - __IOM uint32_t CPPWR; /*!< Offset: 0x00C (R/W) Coprocessor Power Control Register */ -} SCnSCB_Type; - -/* Interrupt Controller Type Register Definitions */ -#define SCnSCB_ICTR_INTLINESNUM_Pos 0U /*!< ICTR: INTLINESNUM Position */ -#define SCnSCB_ICTR_INTLINESNUM_Msk (0xFUL /*<< SCnSCB_ICTR_INTLINESNUM_Pos*/) /*!< ICTR: INTLINESNUM Mask */ - -/*@} end of group CMSIS_SCnotSCB */ - - -/** - \ingroup CMSIS_core_register - \defgroup CMSIS_SysTick System Tick Timer (SysTick) - \brief Type definitions for the System Timer Registers. - @{ - */ - -/** - \brief Structure type to access the System Timer (SysTick). - */ -typedef struct -{ - __IOM uint32_t CTRL; /*!< Offset: 0x000 (R/W) SysTick Control and Status Register */ - __IOM uint32_t LOAD; /*!< Offset: 0x004 (R/W) SysTick Reload Value Register */ - __IOM uint32_t VAL; /*!< Offset: 0x008 (R/W) SysTick Current Value Register */ - __IM uint32_t CALIB; /*!< Offset: 0x00C (R/ ) SysTick Calibration Register */ -} SysTick_Type; - -/* SysTick Control / Status Register Definitions */ -#define SysTick_CTRL_COUNTFLAG_Pos 16U /*!< SysTick CTRL: COUNTFLAG Position */ -#define SysTick_CTRL_COUNTFLAG_Msk (1UL << SysTick_CTRL_COUNTFLAG_Pos) /*!< SysTick CTRL: COUNTFLAG Mask */ - -#define SysTick_CTRL_CLKSOURCE_Pos 2U /*!< SysTick CTRL: CLKSOURCE Position */ -#define SysTick_CTRL_CLKSOURCE_Msk (1UL << SysTick_CTRL_CLKSOURCE_Pos) /*!< SysTick CTRL: CLKSOURCE Mask */ - -#define SysTick_CTRL_TICKINT_Pos 1U /*!< SysTick CTRL: TICKINT Position */ -#define SysTick_CTRL_TICKINT_Msk (1UL << SysTick_CTRL_TICKINT_Pos) /*!< SysTick CTRL: TICKINT Mask */ - -#define SysTick_CTRL_ENABLE_Pos 0U /*!< SysTick CTRL: ENABLE Position */ -#define SysTick_CTRL_ENABLE_Msk (1UL /*<< SysTick_CTRL_ENABLE_Pos*/) /*!< SysTick CTRL: ENABLE Mask */ - -/* SysTick Reload Register Definitions */ -#define SysTick_LOAD_RELOAD_Pos 0U /*!< SysTick LOAD: RELOAD Position */ -#define SysTick_LOAD_RELOAD_Msk (0xFFFFFFUL /*<< SysTick_LOAD_RELOAD_Pos*/) /*!< SysTick LOAD: RELOAD Mask */ - -/* SysTick Current Register Definitions */ -#define SysTick_VAL_CURRENT_Pos 0U /*!< SysTick VAL: CURRENT Position */ -#define SysTick_VAL_CURRENT_Msk (0xFFFFFFUL /*<< SysTick_VAL_CURRENT_Pos*/) /*!< SysTick VAL: CURRENT Mask */ - -/* SysTick Calibration Register Definitions */ -#define SysTick_CALIB_NOREF_Pos 31U /*!< SysTick CALIB: NOREF Position */ -#define SysTick_CALIB_NOREF_Msk (1UL << SysTick_CALIB_NOREF_Pos) /*!< SysTick CALIB: NOREF Mask */ - -#define SysTick_CALIB_SKEW_Pos 30U /*!< SysTick CALIB: SKEW Position */ -#define SysTick_CALIB_SKEW_Msk (1UL << SysTick_CALIB_SKEW_Pos) /*!< SysTick CALIB: SKEW Mask */ - -#define SysTick_CALIB_TENMS_Pos 0U /*!< SysTick CALIB: TENMS Position */ -#define SysTick_CALIB_TENMS_Msk (0xFFFFFFUL /*<< SysTick_CALIB_TENMS_Pos*/) /*!< SysTick CALIB: TENMS Mask */ - -/*@} end of group CMSIS_SysTick */ - - -/** - \ingroup CMSIS_core_register - \defgroup CMSIS_ITM Instrumentation Trace Macrocell (ITM) - \brief Type definitions for the Instrumentation Trace Macrocell (ITM) - @{ - */ - -/** - \brief Structure type to access the Instrumentation Trace Macrocell Register (ITM). - */ -typedef struct -{ - __OM union - { - __OM uint8_t u8; /*!< Offset: 0x000 ( /W) ITM Stimulus Port 8-bit */ - __OM uint16_t u16; /*!< Offset: 0x000 ( /W) ITM Stimulus Port 16-bit */ - __OM uint32_t u32; /*!< Offset: 0x000 ( /W) ITM Stimulus Port 32-bit */ - } PORT [32U]; /*!< Offset: 0x000 ( /W) ITM Stimulus Port Registers */ - uint32_t RESERVED0[864U]; - __IOM uint32_t TER; /*!< Offset: 0xE00 (R/W) ITM Trace Enable Register */ - uint32_t RESERVED1[15U]; - __IOM uint32_t TPR; /*!< Offset: 0xE40 (R/W) ITM Trace Privilege Register */ - uint32_t RESERVED2[15U]; - __IOM uint32_t TCR; /*!< Offset: 0xE80 (R/W) ITM Trace Control Register */ - uint32_t RESERVED3[29U]; - __OM uint32_t IWR; /*!< Offset: 0xEF8 ( /W) ITM Integration Write Register */ - __IM uint32_t IRR; /*!< Offset: 0xEFC (R/ ) ITM Integration Read Register */ - __IOM uint32_t IMCR; /*!< Offset: 0xF00 (R/W) ITM Integration Mode Control Register */ - uint32_t RESERVED4[43U]; - __OM uint32_t LAR; /*!< Offset: 0xFB0 ( /W) ITM Lock Access Register */ - __IM uint32_t LSR; /*!< Offset: 0xFB4 (R/ ) ITM Lock Status Register */ - uint32_t RESERVED5[1U]; - __IM uint32_t DEVARCH; /*!< Offset: 0xFBC (R/ ) ITM Device Architecture Register */ - uint32_t RESERVED6[4U]; - __IM uint32_t PID4; /*!< Offset: 0xFD0 (R/ ) ITM Peripheral Identification Register #4 */ - __IM uint32_t PID5; /*!< Offset: 0xFD4 (R/ ) ITM Peripheral Identification Register #5 */ - __IM uint32_t PID6; /*!< Offset: 0xFD8 (R/ ) ITM Peripheral Identification Register #6 */ - __IM uint32_t PID7; /*!< Offset: 0xFDC (R/ ) ITM Peripheral Identification Register #7 */ - __IM uint32_t PID0; /*!< Offset: 0xFE0 (R/ ) ITM Peripheral Identification Register #0 */ - __IM uint32_t PID1; /*!< Offset: 0xFE4 (R/ ) ITM Peripheral Identification Register #1 */ - __IM uint32_t PID2; /*!< Offset: 0xFE8 (R/ ) ITM Peripheral Identification Register #2 */ - __IM uint32_t PID3; /*!< Offset: 0xFEC (R/ ) ITM Peripheral Identification Register #3 */ - __IM uint32_t CID0; /*!< Offset: 0xFF0 (R/ ) ITM Component Identification Register #0 */ - __IM uint32_t CID1; /*!< Offset: 0xFF4 (R/ ) ITM Component Identification Register #1 */ - __IM uint32_t CID2; /*!< Offset: 0xFF8 (R/ ) ITM Component Identification Register #2 */ - __IM uint32_t CID3; /*!< Offset: 0xFFC (R/ ) ITM Component Identification Register #3 */ -} ITM_Type; - -/* ITM Stimulus Port Register Definitions */ -#define ITM_STIM_DISABLED_Pos 1U /*!< ITM STIM: DISABLED Position */ -#define ITM_STIM_DISABLED_Msk (0x1UL << ITM_STIM_DISABLED_Pos) /*!< ITM STIM: DISABLED Mask */ - -#define ITM_STIM_FIFOREADY_Pos 0U /*!< ITM STIM: FIFOREADY Position */ -#define ITM_STIM_FIFOREADY_Msk (0x1UL /*<< ITM_STIM_FIFOREADY_Pos*/) /*!< ITM STIM: FIFOREADY Mask */ - -/* ITM Trace Privilege Register Definitions */ -#define ITM_TPR_PRIVMASK_Pos 0U /*!< ITM TPR: PRIVMASK Position */ -#define ITM_TPR_PRIVMASK_Msk (0xFUL /*<< ITM_TPR_PRIVMASK_Pos*/) /*!< ITM TPR: PRIVMASK Mask */ - -/* ITM Trace Control Register Definitions */ -#define ITM_TCR_BUSY_Pos 23U /*!< ITM TCR: BUSY Position */ -#define ITM_TCR_BUSY_Msk (1UL << ITM_TCR_BUSY_Pos) /*!< ITM TCR: BUSY Mask */ - -#define ITM_TCR_TRACEBUSID_Pos 16U /*!< ITM TCR: ATBID Position */ -#define ITM_TCR_TRACEBUSID_Msk (0x7FUL << ITM_TCR_TRACEBUSID_Pos) /*!< ITM TCR: ATBID Mask */ - -#define ITM_TCR_GTSFREQ_Pos 10U /*!< ITM TCR: Global timestamp frequency Position */ -#define ITM_TCR_GTSFREQ_Msk (3UL << ITM_TCR_GTSFREQ_Pos) /*!< ITM TCR: Global timestamp frequency Mask */ - -#define ITM_TCR_TSPRESCALE_Pos 8U /*!< ITM TCR: TSPRESCALE Position */ -#define ITM_TCR_TSPRESCALE_Msk (3UL << ITM_TCR_TSPRESCALE_Pos) /*!< ITM TCR: TSPRESCALE Mask */ - -#define ITM_TCR_STALLENA_Pos 5U /*!< ITM TCR: STALLENA Position */ -#define ITM_TCR_STALLENA_Msk (1UL << ITM_TCR_STALLENA_Pos) /*!< ITM TCR: STALLENA Mask */ - -#define ITM_TCR_SWOENA_Pos 4U /*!< ITM TCR: SWOENA Position */ -#define ITM_TCR_SWOENA_Msk (1UL << ITM_TCR_SWOENA_Pos) /*!< ITM TCR: SWOENA Mask */ - -#define ITM_TCR_DWTENA_Pos 3U /*!< ITM TCR: DWTENA Position */ -#define ITM_TCR_DWTENA_Msk (1UL << ITM_TCR_DWTENA_Pos) /*!< ITM TCR: DWTENA Mask */ - -#define ITM_TCR_SYNCENA_Pos 2U /*!< ITM TCR: SYNCENA Position */ -#define ITM_TCR_SYNCENA_Msk (1UL << ITM_TCR_SYNCENA_Pos) /*!< ITM TCR: SYNCENA Mask */ - -#define ITM_TCR_TSENA_Pos 1U /*!< ITM TCR: TSENA Position */ -#define ITM_TCR_TSENA_Msk (1UL << ITM_TCR_TSENA_Pos) /*!< ITM TCR: TSENA Mask */ - -#define ITM_TCR_ITMENA_Pos 0U /*!< ITM TCR: ITM Enable bit Position */ -#define ITM_TCR_ITMENA_Msk (1UL /*<< ITM_TCR_ITMENA_Pos*/) /*!< ITM TCR: ITM Enable bit Mask */ - -/* ITM Integration Write Register Definitions */ -#define ITM_IWR_ATVALIDM_Pos 0U /*!< ITM IWR: ATVALIDM Position */ -#define ITM_IWR_ATVALIDM_Msk (1UL /*<< ITM_IWR_ATVALIDM_Pos*/) /*!< ITM IWR: ATVALIDM Mask */ - -/* ITM Integration Read Register Definitions */ -#define ITM_IRR_ATREADYM_Pos 0U /*!< ITM IRR: ATREADYM Position */ -#define ITM_IRR_ATREADYM_Msk (1UL /*<< ITM_IRR_ATREADYM_Pos*/) /*!< ITM IRR: ATREADYM Mask */ - -/* ITM Integration Mode Control Register Definitions */ -#define ITM_IMCR_INTEGRATION_Pos 0U /*!< ITM IMCR: INTEGRATION Position */ -#define ITM_IMCR_INTEGRATION_Msk (1UL /*<< ITM_IMCR_INTEGRATION_Pos*/) /*!< ITM IMCR: INTEGRATION Mask */ - -/* ITM Lock Status Register Definitions */ -#define ITM_LSR_ByteAcc_Pos 2U /*!< ITM LSR: ByteAcc Position */ -#define ITM_LSR_ByteAcc_Msk (1UL << ITM_LSR_ByteAcc_Pos) /*!< ITM LSR: ByteAcc Mask */ - -#define ITM_LSR_Access_Pos 1U /*!< ITM LSR: Access Position */ -#define ITM_LSR_Access_Msk (1UL << ITM_LSR_Access_Pos) /*!< ITM LSR: Access Mask */ - -#define ITM_LSR_Present_Pos 0U /*!< ITM LSR: Present Position */ -#define ITM_LSR_Present_Msk (1UL /*<< ITM_LSR_Present_Pos*/) /*!< ITM LSR: Present Mask */ - -/*@}*/ /* end of group CMSIS_ITM */ - - -/** - \ingroup CMSIS_core_register - \defgroup CMSIS_DWT Data Watchpoint and Trace (DWT) - \brief Type definitions for the Data Watchpoint and Trace (DWT) - @{ - */ - -/** - \brief Structure type to access the Data Watchpoint and Trace Register (DWT). - */ -typedef struct -{ - __IOM uint32_t CTRL; /*!< Offset: 0x000 (R/W) Control Register */ - __IOM uint32_t CYCCNT; /*!< Offset: 0x004 (R/W) Cycle Count Register */ - __IOM uint32_t CPICNT; /*!< Offset: 0x008 (R/W) CPI Count Register */ - __IOM uint32_t EXCCNT; /*!< Offset: 0x00C (R/W) Exception Overhead Count Register */ - __IOM uint32_t SLEEPCNT; /*!< Offset: 0x010 (R/W) Sleep Count Register */ - __IOM uint32_t LSUCNT; /*!< Offset: 0x014 (R/W) LSU Count Register */ - __IOM uint32_t FOLDCNT; /*!< Offset: 0x018 (R/W) Folded-instruction Count Register */ - __IM uint32_t PCSR; /*!< Offset: 0x01C (R/ ) Program Counter Sample Register */ - __IOM uint32_t COMP0; /*!< Offset: 0x020 (R/W) Comparator Register 0 */ - uint32_t RESERVED1[1U]; - __IOM uint32_t FUNCTION0; /*!< Offset: 0x028 (R/W) Function Register 0 */ - uint32_t RESERVED2[1U]; - __IOM uint32_t COMP1; /*!< Offset: 0x030 (R/W) Comparator Register 1 */ - uint32_t RESERVED3[1U]; - __IOM uint32_t FUNCTION1; /*!< Offset: 0x038 (R/W) Function Register 1 */ - uint32_t RESERVED4[1U]; - __IOM uint32_t COMP2; /*!< Offset: 0x040 (R/W) Comparator Register 2 */ - uint32_t RESERVED5[1U]; - __IOM uint32_t FUNCTION2; /*!< Offset: 0x048 (R/W) Function Register 2 */ - uint32_t RESERVED6[1U]; - __IOM uint32_t COMP3; /*!< Offset: 0x050 (R/W) Comparator Register 3 */ - uint32_t RESERVED7[1U]; - __IOM uint32_t FUNCTION3; /*!< Offset: 0x058 (R/W) Function Register 3 */ - uint32_t RESERVED8[1U]; - __IOM uint32_t COMP4; /*!< Offset: 0x060 (R/W) Comparator Register 4 */ - uint32_t RESERVED9[1U]; - __IOM uint32_t FUNCTION4; /*!< Offset: 0x068 (R/W) Function Register 4 */ - uint32_t RESERVED10[1U]; - __IOM uint32_t COMP5; /*!< Offset: 0x070 (R/W) Comparator Register 5 */ - uint32_t RESERVED11[1U]; - __IOM uint32_t FUNCTION5; /*!< Offset: 0x078 (R/W) Function Register 5 */ - uint32_t RESERVED12[1U]; - __IOM uint32_t COMP6; /*!< Offset: 0x080 (R/W) Comparator Register 6 */ - uint32_t RESERVED13[1U]; - __IOM uint32_t FUNCTION6; /*!< Offset: 0x088 (R/W) Function Register 6 */ - uint32_t RESERVED14[1U]; - __IOM uint32_t COMP7; /*!< Offset: 0x090 (R/W) Comparator Register 7 */ - uint32_t RESERVED15[1U]; - __IOM uint32_t FUNCTION7; /*!< Offset: 0x098 (R/W) Function Register 7 */ - uint32_t RESERVED16[1U]; - __IOM uint32_t COMP8; /*!< Offset: 0x0A0 (R/W) Comparator Register 8 */ - uint32_t RESERVED17[1U]; - __IOM uint32_t FUNCTION8; /*!< Offset: 0x0A8 (R/W) Function Register 8 */ - uint32_t RESERVED18[1U]; - __IOM uint32_t COMP9; /*!< Offset: 0x0B0 (R/W) Comparator Register 9 */ - uint32_t RESERVED19[1U]; - __IOM uint32_t FUNCTION9; /*!< Offset: 0x0B8 (R/W) Function Register 9 */ - uint32_t RESERVED20[1U]; - __IOM uint32_t COMP10; /*!< Offset: 0x0C0 (R/W) Comparator Register 10 */ - uint32_t RESERVED21[1U]; - __IOM uint32_t FUNCTION10; /*!< Offset: 0x0C8 (R/W) Function Register 10 */ - uint32_t RESERVED22[1U]; - __IOM uint32_t COMP11; /*!< Offset: 0x0D0 (R/W) Comparator Register 11 */ - uint32_t RESERVED23[1U]; - __IOM uint32_t FUNCTION11; /*!< Offset: 0x0D8 (R/W) Function Register 11 */ - uint32_t RESERVED24[1U]; - __IOM uint32_t COMP12; /*!< Offset: 0x0E0 (R/W) Comparator Register 12 */ - uint32_t RESERVED25[1U]; - __IOM uint32_t FUNCTION12; /*!< Offset: 0x0E8 (R/W) Function Register 12 */ - uint32_t RESERVED26[1U]; - __IOM uint32_t COMP13; /*!< Offset: 0x0F0 (R/W) Comparator Register 13 */ - uint32_t RESERVED27[1U]; - __IOM uint32_t FUNCTION13; /*!< Offset: 0x0F8 (R/W) Function Register 13 */ - uint32_t RESERVED28[1U]; - __IOM uint32_t COMP14; /*!< Offset: 0x100 (R/W) Comparator Register 14 */ - uint32_t RESERVED29[1U]; - __IOM uint32_t FUNCTION14; /*!< Offset: 0x108 (R/W) Function Register 14 */ - uint32_t RESERVED30[1U]; - __IOM uint32_t COMP15; /*!< Offset: 0x110 (R/W) Comparator Register 15 */ - uint32_t RESERVED31[1U]; - __IOM uint32_t FUNCTION15; /*!< Offset: 0x118 (R/W) Function Register 15 */ - uint32_t RESERVED32[934U]; - __IM uint32_t LSR; /*!< Offset: 0xFB4 (R ) Lock Status Register */ - uint32_t RESERVED33[1U]; - __IM uint32_t DEVARCH; /*!< Offset: 0xFBC (R/ ) Device Architecture Register */ -} DWT_Type; - -/* DWT Control Register Definitions */ -#define DWT_CTRL_NUMCOMP_Pos 28U /*!< DWT CTRL: NUMCOMP Position */ -#define DWT_CTRL_NUMCOMP_Msk (0xFUL << DWT_CTRL_NUMCOMP_Pos) /*!< DWT CTRL: NUMCOMP Mask */ - -#define DWT_CTRL_NOTRCPKT_Pos 27U /*!< DWT CTRL: NOTRCPKT Position */ -#define DWT_CTRL_NOTRCPKT_Msk (0x1UL << DWT_CTRL_NOTRCPKT_Pos) /*!< DWT CTRL: NOTRCPKT Mask */ - -#define DWT_CTRL_NOEXTTRIG_Pos 26U /*!< DWT CTRL: NOEXTTRIG Position */ -#define DWT_CTRL_NOEXTTRIG_Msk (0x1UL << DWT_CTRL_NOEXTTRIG_Pos) /*!< DWT CTRL: NOEXTTRIG Mask */ - -#define DWT_CTRL_NOCYCCNT_Pos 25U /*!< DWT CTRL: NOCYCCNT Position */ -#define DWT_CTRL_NOCYCCNT_Msk (0x1UL << DWT_CTRL_NOCYCCNT_Pos) /*!< DWT CTRL: NOCYCCNT Mask */ - -#define DWT_CTRL_NOPRFCNT_Pos 24U /*!< DWT CTRL: NOPRFCNT Position */ -#define DWT_CTRL_NOPRFCNT_Msk (0x1UL << DWT_CTRL_NOPRFCNT_Pos) /*!< DWT CTRL: NOPRFCNT Mask */ - -#define DWT_CTRL_CYCDISS_Pos 23U /*!< DWT CTRL: CYCDISS Position */ -#define DWT_CTRL_CYCDISS_Msk (0x1UL << DWT_CTRL_CYCDISS_Pos) /*!< DWT CTRL: CYCDISS Mask */ - -#define DWT_CTRL_CYCEVTENA_Pos 22U /*!< DWT CTRL: CYCEVTENA Position */ -#define DWT_CTRL_CYCEVTENA_Msk (0x1UL << DWT_CTRL_CYCEVTENA_Pos) /*!< DWT CTRL: CYCEVTENA Mask */ - -#define DWT_CTRL_FOLDEVTENA_Pos 21U /*!< DWT CTRL: FOLDEVTENA Position */ -#define DWT_CTRL_FOLDEVTENA_Msk (0x1UL << DWT_CTRL_FOLDEVTENA_Pos) /*!< DWT CTRL: FOLDEVTENA Mask */ - -#define DWT_CTRL_LSUEVTENA_Pos 20U /*!< DWT CTRL: LSUEVTENA Position */ -#define DWT_CTRL_LSUEVTENA_Msk (0x1UL << DWT_CTRL_LSUEVTENA_Pos) /*!< DWT CTRL: LSUEVTENA Mask */ - -#define DWT_CTRL_SLEEPEVTENA_Pos 19U /*!< DWT CTRL: SLEEPEVTENA Position */ -#define DWT_CTRL_SLEEPEVTENA_Msk (0x1UL << DWT_CTRL_SLEEPEVTENA_Pos) /*!< DWT CTRL: SLEEPEVTENA Mask */ - -#define DWT_CTRL_EXCEVTENA_Pos 18U /*!< DWT CTRL: EXCEVTENA Position */ -#define DWT_CTRL_EXCEVTENA_Msk (0x1UL << DWT_CTRL_EXCEVTENA_Pos) /*!< DWT CTRL: EXCEVTENA Mask */ - -#define DWT_CTRL_CPIEVTENA_Pos 17U /*!< DWT CTRL: CPIEVTENA Position */ -#define DWT_CTRL_CPIEVTENA_Msk (0x1UL << DWT_CTRL_CPIEVTENA_Pos) /*!< DWT CTRL: CPIEVTENA Mask */ - -#define DWT_CTRL_EXCTRCENA_Pos 16U /*!< DWT CTRL: EXCTRCENA Position */ -#define DWT_CTRL_EXCTRCENA_Msk (0x1UL << DWT_CTRL_EXCTRCENA_Pos) /*!< DWT CTRL: EXCTRCENA Mask */ - -#define DWT_CTRL_PCSAMPLENA_Pos 12U /*!< DWT CTRL: PCSAMPLENA Position */ -#define DWT_CTRL_PCSAMPLENA_Msk (0x1UL << DWT_CTRL_PCSAMPLENA_Pos) /*!< DWT CTRL: PCSAMPLENA Mask */ - -#define DWT_CTRL_SYNCTAP_Pos 10U /*!< DWT CTRL: SYNCTAP Position */ -#define DWT_CTRL_SYNCTAP_Msk (0x3UL << DWT_CTRL_SYNCTAP_Pos) /*!< DWT CTRL: SYNCTAP Mask */ - -#define DWT_CTRL_CYCTAP_Pos 9U /*!< DWT CTRL: CYCTAP Position */ -#define DWT_CTRL_CYCTAP_Msk (0x1UL << DWT_CTRL_CYCTAP_Pos) /*!< DWT CTRL: CYCTAP Mask */ - -#define DWT_CTRL_POSTINIT_Pos 5U /*!< DWT CTRL: POSTINIT Position */ -#define DWT_CTRL_POSTINIT_Msk (0xFUL << DWT_CTRL_POSTINIT_Pos) /*!< DWT CTRL: POSTINIT Mask */ - -#define DWT_CTRL_POSTPRESET_Pos 1U /*!< DWT CTRL: POSTPRESET Position */ -#define DWT_CTRL_POSTPRESET_Msk (0xFUL << DWT_CTRL_POSTPRESET_Pos) /*!< DWT CTRL: POSTPRESET Mask */ - -#define DWT_CTRL_CYCCNTENA_Pos 0U /*!< DWT CTRL: CYCCNTENA Position */ -#define DWT_CTRL_CYCCNTENA_Msk (0x1UL /*<< DWT_CTRL_CYCCNTENA_Pos*/) /*!< DWT CTRL: CYCCNTENA Mask */ - -/* DWT CPI Count Register Definitions */ -#define DWT_CPICNT_CPICNT_Pos 0U /*!< DWT CPICNT: CPICNT Position */ -#define DWT_CPICNT_CPICNT_Msk (0xFFUL /*<< DWT_CPICNT_CPICNT_Pos*/) /*!< DWT CPICNT: CPICNT Mask */ - -/* DWT Exception Overhead Count Register Definitions */ -#define DWT_EXCCNT_EXCCNT_Pos 0U /*!< DWT EXCCNT: EXCCNT Position */ -#define DWT_EXCCNT_EXCCNT_Msk (0xFFUL /*<< DWT_EXCCNT_EXCCNT_Pos*/) /*!< DWT EXCCNT: EXCCNT Mask */ - -/* DWT Sleep Count Register Definitions */ -#define DWT_SLEEPCNT_SLEEPCNT_Pos 0U /*!< DWT SLEEPCNT: SLEEPCNT Position */ -#define DWT_SLEEPCNT_SLEEPCNT_Msk (0xFFUL /*<< DWT_SLEEPCNT_SLEEPCNT_Pos*/) /*!< DWT SLEEPCNT: SLEEPCNT Mask */ - -/* DWT LSU Count Register Definitions */ -#define DWT_LSUCNT_LSUCNT_Pos 0U /*!< DWT LSUCNT: LSUCNT Position */ -#define DWT_LSUCNT_LSUCNT_Msk (0xFFUL /*<< DWT_LSUCNT_LSUCNT_Pos*/) /*!< DWT LSUCNT: LSUCNT Mask */ - -/* DWT Folded-instruction Count Register Definitions */ -#define DWT_FOLDCNT_FOLDCNT_Pos 0U /*!< DWT FOLDCNT: FOLDCNT Position */ -#define DWT_FOLDCNT_FOLDCNT_Msk (0xFFUL /*<< DWT_FOLDCNT_FOLDCNT_Pos*/) /*!< DWT FOLDCNT: FOLDCNT Mask */ - -/* DWT Comparator Function Register Definitions */ -#define DWT_FUNCTION_ID_Pos 27U /*!< DWT FUNCTION: ID Position */ -#define DWT_FUNCTION_ID_Msk (0x1FUL << DWT_FUNCTION_ID_Pos) /*!< DWT FUNCTION: ID Mask */ - -#define DWT_FUNCTION_MATCHED_Pos 24U /*!< DWT FUNCTION: MATCHED Position */ -#define DWT_FUNCTION_MATCHED_Msk (0x1UL << DWT_FUNCTION_MATCHED_Pos) /*!< DWT FUNCTION: MATCHED Mask */ - -#define DWT_FUNCTION_DATAVSIZE_Pos 10U /*!< DWT FUNCTION: DATAVSIZE Position */ -#define DWT_FUNCTION_DATAVSIZE_Msk (0x3UL << DWT_FUNCTION_DATAVSIZE_Pos) /*!< DWT FUNCTION: DATAVSIZE Mask */ - -#define DWT_FUNCTION_ACTION_Pos 4U /*!< DWT FUNCTION: ACTION Position */ -#define DWT_FUNCTION_ACTION_Msk (0x1UL << DWT_FUNCTION_ACTION_Pos) /*!< DWT FUNCTION: ACTION Mask */ - -#define DWT_FUNCTION_MATCH_Pos 0U /*!< DWT FUNCTION: MATCH Position */ -#define DWT_FUNCTION_MATCH_Msk (0xFUL /*<< DWT_FUNCTION_MATCH_Pos*/) /*!< DWT FUNCTION: MATCH Mask */ - -/*@}*/ /* end of group CMSIS_DWT */ - - -/** - \ingroup CMSIS_core_register - \defgroup CMSIS_TPI Trace Port Interface (TPI) - \brief Type definitions for the Trace Port Interface (TPI) - @{ - */ - -/** - \brief Structure type to access the Trace Port Interface Register (TPI). - */ -typedef struct -{ - __IM uint32_t SSPSR; /*!< Offset: 0x000 (R/ ) Supported Parallel Port Sizes Register */ - __IOM uint32_t CSPSR; /*!< Offset: 0x004 (R/W) Current Parallel Port Sizes Register */ - uint32_t RESERVED0[2U]; - __IOM uint32_t ACPR; /*!< Offset: 0x010 (R/W) Asynchronous Clock Prescaler Register */ - uint32_t RESERVED1[55U]; - __IOM uint32_t SPPR; /*!< Offset: 0x0F0 (R/W) Selected Pin Protocol Register */ - uint32_t RESERVED2[131U]; - __IM uint32_t FFSR; /*!< Offset: 0x300 (R/ ) Formatter and Flush Status Register */ - __IOM uint32_t FFCR; /*!< Offset: 0x304 (R/W) Formatter and Flush Control Register */ - __IOM uint32_t PSCR; /*!< Offset: 0x308 (R/W) Periodic Synchronization Control Register */ - uint32_t RESERVED3[809U]; - __OM uint32_t LAR; /*!< Offset: 0xFB0 ( /W) Software Lock Access Register */ - __IM uint32_t LSR; /*!< Offset: 0xFB4 (R/ ) Software Lock Status Register */ - uint32_t RESERVED4[4U]; - __IM uint32_t TYPE; /*!< Offset: 0xFC8 (R/ ) Device Identifier Register */ - __IM uint32_t DEVTYPE; /*!< Offset: 0xFCC (R/ ) Device Type Register */ -} TPI_Type; - -/* TPI Asynchronous Clock Prescaler Register Definitions */ -#define TPI_ACPR_SWOSCALER_Pos 0U /*!< TPI ACPR: SWOSCALER Position */ -#define TPI_ACPR_SWOSCALER_Msk (0xFFFFUL /*<< TPI_ACPR_SWOSCALER_Pos*/) /*!< TPI ACPR: SWOSCALER Mask */ - -/* TPI Selected Pin Protocol Register Definitions */ -#define TPI_SPPR_TXMODE_Pos 0U /*!< TPI SPPR: TXMODE Position */ -#define TPI_SPPR_TXMODE_Msk (0x3UL /*<< TPI_SPPR_TXMODE_Pos*/) /*!< TPI SPPR: TXMODE Mask */ - -/* TPI Formatter and Flush Status Register Definitions */ -#define TPI_FFSR_FtNonStop_Pos 3U /*!< TPI FFSR: FtNonStop Position */ -#define TPI_FFSR_FtNonStop_Msk (0x1UL << TPI_FFSR_FtNonStop_Pos) /*!< TPI FFSR: FtNonStop Mask */ - -#define TPI_FFSR_TCPresent_Pos 2U /*!< TPI FFSR: TCPresent Position */ -#define TPI_FFSR_TCPresent_Msk (0x1UL << TPI_FFSR_TCPresent_Pos) /*!< TPI FFSR: TCPresent Mask */ - -#define TPI_FFSR_FtStopped_Pos 1U /*!< TPI FFSR: FtStopped Position */ -#define TPI_FFSR_FtStopped_Msk (0x1UL << TPI_FFSR_FtStopped_Pos) /*!< TPI FFSR: FtStopped Mask */ - -#define TPI_FFSR_FlInProg_Pos 0U /*!< TPI FFSR: FlInProg Position */ -#define TPI_FFSR_FlInProg_Msk (0x1UL /*<< TPI_FFSR_FlInProg_Pos*/) /*!< TPI FFSR: FlInProg Mask */ - -/* TPI Formatter and Flush Control Register Definitions */ -#define TPI_FFCR_TrigIn_Pos 8U /*!< TPI FFCR: TrigIn Position */ -#define TPI_FFCR_TrigIn_Msk (0x1UL << TPI_FFCR_TrigIn_Pos) /*!< TPI FFCR: TrigIn Mask */ - -#define TPI_FFCR_FOnMan_Pos 6U /*!< TPI FFCR: FOnMan Position */ -#define TPI_FFCR_FOnMan_Msk (0x1UL << TPI_FFCR_FOnMan_Pos) /*!< TPI FFCR: FOnMan Mask */ - -#define TPI_FFCR_EnFCont_Pos 1U /*!< TPI FFCR: EnFCont Position */ -#define TPI_FFCR_EnFCont_Msk (0x1UL << TPI_FFCR_EnFCont_Pos) /*!< TPI FFCR: EnFCont Mask */ - -/* TPI Periodic Synchronization Control Register Definitions */ -#define TPI_PSCR_PSCount_Pos 0U /*!< TPI PSCR: PSCount Position */ -#define TPI_PSCR_PSCount_Msk (0x1FUL /*<< TPI_PSCR_PSCount_Pos*/) /*!< TPI PSCR: TPSCount Mask */ - -/* TPI Software Lock Status Register Definitions */ -#define TPI_LSR_nTT_Pos 1U /*!< TPI LSR: Not thirty-two bit. Position */ -#define TPI_LSR_nTT_Msk (0x1UL << TPI_LSR_nTT_Pos) /*!< TPI LSR: Not thirty-two bit. Mask */ - -#define TPI_LSR_SLK_Pos 1U /*!< TPI LSR: Software Lock status Position */ -#define TPI_LSR_SLK_Msk (0x1UL << TPI_LSR_SLK_Pos) /*!< TPI LSR: Software Lock status Mask */ - -#define TPI_LSR_SLI_Pos 0U /*!< TPI LSR: Software Lock implemented Position */ -#define TPI_LSR_SLI_Msk (0x1UL /*<< TPI_LSR_SLI_Pos*/) /*!< TPI LSR: Software Lock implemented Mask */ - -/* TPI DEVID Register Definitions */ -#define TPI_DEVID_NRZVALID_Pos 11U /*!< TPI DEVID: NRZVALID Position */ -#define TPI_DEVID_NRZVALID_Msk (0x1UL << TPI_DEVID_NRZVALID_Pos) /*!< TPI DEVID: NRZVALID Mask */ - -#define TPI_DEVID_MANCVALID_Pos 10U /*!< TPI DEVID: MANCVALID Position */ -#define TPI_DEVID_MANCVALID_Msk (0x1UL << TPI_DEVID_MANCVALID_Pos) /*!< TPI DEVID: MANCVALID Mask */ - -#define TPI_DEVID_PTINVALID_Pos 9U /*!< TPI DEVID: PTINVALID Position */ -#define TPI_DEVID_PTINVALID_Msk (0x1UL << TPI_DEVID_PTINVALID_Pos) /*!< TPI DEVID: PTINVALID Mask */ - -#define TPI_DEVID_FIFOSZ_Pos 6U /*!< TPI DEVID: FIFO depth Position */ -#define TPI_DEVID_FIFOSZ_Msk (0x7UL << TPI_DEVID_FIFOSZ_Pos) /*!< TPI DEVID: FIFO depth Mask */ - -/* TPI DEVTYPE Register Definitions */ -#define TPI_DEVTYPE_SubType_Pos 4U /*!< TPI DEVTYPE: SubType Position */ -#define TPI_DEVTYPE_SubType_Msk (0xFUL /*<< TPI_DEVTYPE_SubType_Pos*/) /*!< TPI DEVTYPE: SubType Mask */ - -#define TPI_DEVTYPE_MajorType_Pos 0U /*!< TPI DEVTYPE: MajorType Position */ -#define TPI_DEVTYPE_MajorType_Msk (0xFUL << TPI_DEVTYPE_MajorType_Pos) /*!< TPI DEVTYPE: MajorType Mask */ - -/*@}*/ /* end of group CMSIS_TPI */ - - -#if defined (__MPU_PRESENT) && (__MPU_PRESENT == 1U) -/** - \ingroup CMSIS_core_register - \defgroup CMSIS_MPU Memory Protection Unit (MPU) - \brief Type definitions for the Memory Protection Unit (MPU) - @{ - */ - -/** - \brief Structure type to access the Memory Protection Unit (MPU). - */ -typedef struct -{ - __IM uint32_t TYPE; /*!< Offset: 0x000 (R/ ) MPU Type Register */ - __IOM uint32_t CTRL; /*!< Offset: 0x004 (R/W) MPU Control Register */ - __IOM uint32_t RNR; /*!< Offset: 0x008 (R/W) MPU Region Number Register */ - __IOM uint32_t RBAR; /*!< Offset: 0x00C (R/W) MPU Region Base Address Register */ - __IOM uint32_t RLAR; /*!< Offset: 0x010 (R/W) MPU Region Limit Address Register */ - __IOM uint32_t RBAR_A1; /*!< Offset: 0x014 (R/W) MPU Region Base Address Register Alias 1 */ - __IOM uint32_t RLAR_A1; /*!< Offset: 0x018 (R/W) MPU Region Limit Address Register Alias 1 */ - __IOM uint32_t RBAR_A2; /*!< Offset: 0x01C (R/W) MPU Region Base Address Register Alias 2 */ - __IOM uint32_t RLAR_A2; /*!< Offset: 0x020 (R/W) MPU Region Limit Address Register Alias 2 */ - __IOM uint32_t RBAR_A3; /*!< Offset: 0x024 (R/W) MPU Region Base Address Register Alias 3 */ - __IOM uint32_t RLAR_A3; /*!< Offset: 0x028 (R/W) MPU Region Limit Address Register Alias 3 */ - uint32_t RESERVED0[1]; - union { - __IOM uint32_t MAIR[2]; - struct { - __IOM uint32_t MAIR0; /*!< Offset: 0x030 (R/W) MPU Memory Attribute Indirection Register 0 */ - __IOM uint32_t MAIR1; /*!< Offset: 0x034 (R/W) MPU Memory Attribute Indirection Register 1 */ - }; - }; -} MPU_Type; - -#define MPU_TYPE_RALIASES 4U - -/* MPU Type Register Definitions */ -#define MPU_TYPE_IREGION_Pos 16U /*!< MPU TYPE: IREGION Position */ -#define MPU_TYPE_IREGION_Msk (0xFFUL << MPU_TYPE_IREGION_Pos) /*!< MPU TYPE: IREGION Mask */ - -#define MPU_TYPE_DREGION_Pos 8U /*!< MPU TYPE: DREGION Position */ -#define MPU_TYPE_DREGION_Msk (0xFFUL << MPU_TYPE_DREGION_Pos) /*!< MPU TYPE: DREGION Mask */ - -#define MPU_TYPE_SEPARATE_Pos 0U /*!< MPU TYPE: SEPARATE Position */ -#define MPU_TYPE_SEPARATE_Msk (1UL /*<< MPU_TYPE_SEPARATE_Pos*/) /*!< MPU TYPE: SEPARATE Mask */ - -/* MPU Control Register Definitions */ -#define MPU_CTRL_PRIVDEFENA_Pos 2U /*!< MPU CTRL: PRIVDEFENA Position */ -#define MPU_CTRL_PRIVDEFENA_Msk (1UL << MPU_CTRL_PRIVDEFENA_Pos) /*!< MPU CTRL: PRIVDEFENA Mask */ - -#define MPU_CTRL_HFNMIENA_Pos 1U /*!< MPU CTRL: HFNMIENA Position */ -#define MPU_CTRL_HFNMIENA_Msk (1UL << MPU_CTRL_HFNMIENA_Pos) /*!< MPU CTRL: HFNMIENA Mask */ - -#define MPU_CTRL_ENABLE_Pos 0U /*!< MPU CTRL: ENABLE Position */ -#define MPU_CTRL_ENABLE_Msk (1UL /*<< MPU_CTRL_ENABLE_Pos*/) /*!< MPU CTRL: ENABLE Mask */ - -/* MPU Region Number Register Definitions */ -#define MPU_RNR_REGION_Pos 0U /*!< MPU RNR: REGION Position */ -#define MPU_RNR_REGION_Msk (0xFFUL /*<< MPU_RNR_REGION_Pos*/) /*!< MPU RNR: REGION Mask */ - -/* MPU Region Base Address Register Definitions */ -#define MPU_RBAR_BASE_Pos 5U /*!< MPU RBAR: BASE Position */ -#define MPU_RBAR_BASE_Msk (0x7FFFFFFUL << MPU_RBAR_BASE_Pos) /*!< MPU RBAR: BASE Mask */ - -#define MPU_RBAR_SH_Pos 3U /*!< MPU RBAR: SH Position */ -#define MPU_RBAR_SH_Msk (0x3UL << MPU_RBAR_SH_Pos) /*!< MPU RBAR: SH Mask */ - -#define MPU_RBAR_AP_Pos 1U /*!< MPU RBAR: AP Position */ -#define MPU_RBAR_AP_Msk (0x3UL << MPU_RBAR_AP_Pos) /*!< MPU RBAR: AP Mask */ - -#define MPU_RBAR_XN_Pos 0U /*!< MPU RBAR: XN Position */ -#define MPU_RBAR_XN_Msk (01UL /*<< MPU_RBAR_XN_Pos*/) /*!< MPU RBAR: XN Mask */ - -/* MPU Region Limit Address Register Definitions */ -#define MPU_RLAR_LIMIT_Pos 5U /*!< MPU RLAR: LIMIT Position */ -#define MPU_RLAR_LIMIT_Msk (0x7FFFFFFUL << MPU_RLAR_LIMIT_Pos) /*!< MPU RLAR: LIMIT Mask */ - -#define MPU_RLAR_AttrIndx_Pos 1U /*!< MPU RLAR: AttrIndx Position */ -#define MPU_RLAR_AttrIndx_Msk (0x7UL << MPU_RLAR_AttrIndx_Pos) /*!< MPU RLAR: AttrIndx Mask */ - -#define MPU_RLAR_EN_Pos 0U /*!< MPU RLAR: Region enable bit Position */ -#define MPU_RLAR_EN_Msk (1UL /*<< MPU_RLAR_EN_Pos*/) /*!< MPU RLAR: Region enable bit Disable Mask */ - -/* MPU Memory Attribute Indirection Register 0 Definitions */ -#define MPU_MAIR0_Attr3_Pos 24U /*!< MPU MAIR0: Attr3 Position */ -#define MPU_MAIR0_Attr3_Msk (0xFFUL << MPU_MAIR0_Attr3_Pos) /*!< MPU MAIR0: Attr3 Mask */ - -#define MPU_MAIR0_Attr2_Pos 16U /*!< MPU MAIR0: Attr2 Position */ -#define MPU_MAIR0_Attr2_Msk (0xFFUL << MPU_MAIR0_Attr2_Pos) /*!< MPU MAIR0: Attr2 Mask */ - -#define MPU_MAIR0_Attr1_Pos 8U /*!< MPU MAIR0: Attr1 Position */ -#define MPU_MAIR0_Attr1_Msk (0xFFUL << MPU_MAIR0_Attr1_Pos) /*!< MPU MAIR0: Attr1 Mask */ - -#define MPU_MAIR0_Attr0_Pos 0U /*!< MPU MAIR0: Attr0 Position */ -#define MPU_MAIR0_Attr0_Msk (0xFFUL /*<< MPU_MAIR0_Attr0_Pos*/) /*!< MPU MAIR0: Attr0 Mask */ - -/* MPU Memory Attribute Indirection Register 1 Definitions */ -#define MPU_MAIR1_Attr7_Pos 24U /*!< MPU MAIR1: Attr7 Position */ -#define MPU_MAIR1_Attr7_Msk (0xFFUL << MPU_MAIR1_Attr7_Pos) /*!< MPU MAIR1: Attr7 Mask */ - -#define MPU_MAIR1_Attr6_Pos 16U /*!< MPU MAIR1: Attr6 Position */ -#define MPU_MAIR1_Attr6_Msk (0xFFUL << MPU_MAIR1_Attr6_Pos) /*!< MPU MAIR1: Attr6 Mask */ - -#define MPU_MAIR1_Attr5_Pos 8U /*!< MPU MAIR1: Attr5 Position */ -#define MPU_MAIR1_Attr5_Msk (0xFFUL << MPU_MAIR1_Attr5_Pos) /*!< MPU MAIR1: Attr5 Mask */ - -#define MPU_MAIR1_Attr4_Pos 0U /*!< MPU MAIR1: Attr4 Position */ -#define MPU_MAIR1_Attr4_Msk (0xFFUL /*<< MPU_MAIR1_Attr4_Pos*/) /*!< MPU MAIR1: Attr4 Mask */ - -/*@} end of group CMSIS_MPU */ -#endif - - -#if defined (__ARM_FEATURE_CMSE) && (__ARM_FEATURE_CMSE == 3U) -/** - \ingroup CMSIS_core_register - \defgroup CMSIS_SAU Security Attribution Unit (SAU) - \brief Type definitions for the Security Attribution Unit (SAU) - @{ - */ - -/** - \brief Structure type to access the Security Attribution Unit (SAU). - */ -typedef struct -{ - __IOM uint32_t CTRL; /*!< Offset: 0x000 (R/W) SAU Control Register */ - __IM uint32_t TYPE; /*!< Offset: 0x004 (R/ ) SAU Type Register */ -#if defined (__SAUREGION_PRESENT) && (__SAUREGION_PRESENT == 1U) - __IOM uint32_t RNR; /*!< Offset: 0x008 (R/W) SAU Region Number Register */ - __IOM uint32_t RBAR; /*!< Offset: 0x00C (R/W) SAU Region Base Address Register */ - __IOM uint32_t RLAR; /*!< Offset: 0x010 (R/W) SAU Region Limit Address Register */ -#else - uint32_t RESERVED0[3]; -#endif - __IOM uint32_t SFSR; /*!< Offset: 0x014 (R/W) Secure Fault Status Register */ - __IOM uint32_t SFAR; /*!< Offset: 0x018 (R/W) Secure Fault Address Register */ -} SAU_Type; - -/* SAU Control Register Definitions */ -#define SAU_CTRL_ALLNS_Pos 1U /*!< SAU CTRL: ALLNS Position */ -#define SAU_CTRL_ALLNS_Msk (1UL << SAU_CTRL_ALLNS_Pos) /*!< SAU CTRL: ALLNS Mask */ - -#define SAU_CTRL_ENABLE_Pos 0U /*!< SAU CTRL: ENABLE Position */ -#define SAU_CTRL_ENABLE_Msk (1UL /*<< SAU_CTRL_ENABLE_Pos*/) /*!< SAU CTRL: ENABLE Mask */ - -/* SAU Type Register Definitions */ -#define SAU_TYPE_SREGION_Pos 0U /*!< SAU TYPE: SREGION Position */ -#define SAU_TYPE_SREGION_Msk (0xFFUL /*<< SAU_TYPE_SREGION_Pos*/) /*!< SAU TYPE: SREGION Mask */ - -#if defined (__SAUREGION_PRESENT) && (__SAUREGION_PRESENT == 1U) -/* SAU Region Number Register Definitions */ -#define SAU_RNR_REGION_Pos 0U /*!< SAU RNR: REGION Position */ -#define SAU_RNR_REGION_Msk (0xFFUL /*<< SAU_RNR_REGION_Pos*/) /*!< SAU RNR: REGION Mask */ - -/* SAU Region Base Address Register Definitions */ -#define SAU_RBAR_BADDR_Pos 5U /*!< SAU RBAR: BADDR Position */ -#define SAU_RBAR_BADDR_Msk (0x7FFFFFFUL << SAU_RBAR_BADDR_Pos) /*!< SAU RBAR: BADDR Mask */ - -/* SAU Region Limit Address Register Definitions */ -#define SAU_RLAR_LADDR_Pos 5U /*!< SAU RLAR: LADDR Position */ -#define SAU_RLAR_LADDR_Msk (0x7FFFFFFUL << SAU_RLAR_LADDR_Pos) /*!< SAU RLAR: LADDR Mask */ - -#define SAU_RLAR_NSC_Pos 1U /*!< SAU RLAR: NSC Position */ -#define SAU_RLAR_NSC_Msk (1UL << SAU_RLAR_NSC_Pos) /*!< SAU RLAR: NSC Mask */ - -#define SAU_RLAR_ENABLE_Pos 0U /*!< SAU RLAR: ENABLE Position */ -#define SAU_RLAR_ENABLE_Msk (1UL /*<< SAU_RLAR_ENABLE_Pos*/) /*!< SAU RLAR: ENABLE Mask */ - -#endif /* defined (__SAUREGION_PRESENT) && (__SAUREGION_PRESENT == 1U) */ - -/* Secure Fault Status Register Definitions */ -#define SAU_SFSR_LSERR_Pos 7U /*!< SAU SFSR: LSERR Position */ -#define SAU_SFSR_LSERR_Msk (1UL << SAU_SFSR_LSERR_Pos) /*!< SAU SFSR: LSERR Mask */ - -#define SAU_SFSR_SFARVALID_Pos 6U /*!< SAU SFSR: SFARVALID Position */ -#define SAU_SFSR_SFARVALID_Msk (1UL << SAU_SFSR_SFARVALID_Pos) /*!< SAU SFSR: SFARVALID Mask */ - -#define SAU_SFSR_LSPERR_Pos 5U /*!< SAU SFSR: LSPERR Position */ -#define SAU_SFSR_LSPERR_Msk (1UL << SAU_SFSR_LSPERR_Pos) /*!< SAU SFSR: LSPERR Mask */ - -#define SAU_SFSR_INVTRAN_Pos 4U /*!< SAU SFSR: INVTRAN Position */ -#define SAU_SFSR_INVTRAN_Msk (1UL << SAU_SFSR_INVTRAN_Pos) /*!< SAU SFSR: INVTRAN Mask */ - -#define SAU_SFSR_AUVIOL_Pos 3U /*!< SAU SFSR: AUVIOL Position */ -#define SAU_SFSR_AUVIOL_Msk (1UL << SAU_SFSR_AUVIOL_Pos) /*!< SAU SFSR: AUVIOL Mask */ - -#define SAU_SFSR_INVER_Pos 2U /*!< SAU SFSR: INVER Position */ -#define SAU_SFSR_INVER_Msk (1UL << SAU_SFSR_INVER_Pos) /*!< SAU SFSR: INVER Mask */ - -#define SAU_SFSR_INVIS_Pos 1U /*!< SAU SFSR: INVIS Position */ -#define SAU_SFSR_INVIS_Msk (1UL << SAU_SFSR_INVIS_Pos) /*!< SAU SFSR: INVIS Mask */ - -#define SAU_SFSR_INVEP_Pos 0U /*!< SAU SFSR: INVEP Position */ -#define SAU_SFSR_INVEP_Msk (1UL /*<< SAU_SFSR_INVEP_Pos*/) /*!< SAU SFSR: INVEP Mask */ - -/*@} end of group CMSIS_SAU */ -#endif /* defined (__ARM_FEATURE_CMSE) && (__ARM_FEATURE_CMSE == 3U) */ - - -/** - \ingroup CMSIS_core_register - \defgroup CMSIS_FPU Floating Point Unit (FPU) - \brief Type definitions for the Floating Point Unit (FPU) - @{ - */ - -/** - \brief Structure type to access the Floating Point Unit (FPU). - */ -typedef struct -{ - uint32_t RESERVED0[1U]; - __IOM uint32_t FPCCR; /*!< Offset: 0x004 (R/W) Floating-Point Context Control Register */ - __IOM uint32_t FPCAR; /*!< Offset: 0x008 (R/W) Floating-Point Context Address Register */ - __IOM uint32_t FPDSCR; /*!< Offset: 0x00C (R/W) Floating-Point Default Status Control Register */ - __IM uint32_t MVFR0; /*!< Offset: 0x010 (R/ ) Media and FP Feature Register 0 */ - __IM uint32_t MVFR1; /*!< Offset: 0x014 (R/ ) Media and FP Feature Register 1 */ -} FPU_Type; - -/* Floating-Point Context Control Register Definitions */ -#define FPU_FPCCR_ASPEN_Pos 31U /*!< FPCCR: ASPEN bit Position */ -#define FPU_FPCCR_ASPEN_Msk (1UL << FPU_FPCCR_ASPEN_Pos) /*!< FPCCR: ASPEN bit Mask */ - -#define FPU_FPCCR_LSPEN_Pos 30U /*!< FPCCR: LSPEN Position */ -#define FPU_FPCCR_LSPEN_Msk (1UL << FPU_FPCCR_LSPEN_Pos) /*!< FPCCR: LSPEN bit Mask */ - -#define FPU_FPCCR_LSPENS_Pos 29U /*!< FPCCR: LSPENS Position */ -#define FPU_FPCCR_LSPENS_Msk (1UL << FPU_FPCCR_LSPENS_Pos) /*!< FPCCR: LSPENS bit Mask */ - -#define FPU_FPCCR_CLRONRET_Pos 28U /*!< FPCCR: CLRONRET Position */ -#define FPU_FPCCR_CLRONRET_Msk (1UL << FPU_FPCCR_CLRONRET_Pos) /*!< FPCCR: CLRONRET bit Mask */ - -#define FPU_FPCCR_CLRONRETS_Pos 27U /*!< FPCCR: CLRONRETS Position */ -#define FPU_FPCCR_CLRONRETS_Msk (1UL << FPU_FPCCR_CLRONRETS_Pos) /*!< FPCCR: CLRONRETS bit Mask */ - -#define FPU_FPCCR_TS_Pos 26U /*!< FPCCR: TS Position */ -#define FPU_FPCCR_TS_Msk (1UL << FPU_FPCCR_TS_Pos) /*!< FPCCR: TS bit Mask */ - -#define FPU_FPCCR_UFRDY_Pos 10U /*!< FPCCR: UFRDY Position */ -#define FPU_FPCCR_UFRDY_Msk (1UL << FPU_FPCCR_UFRDY_Pos) /*!< FPCCR: UFRDY bit Mask */ - -#define FPU_FPCCR_SPLIMVIOL_Pos 9U /*!< FPCCR: SPLIMVIOL Position */ -#define FPU_FPCCR_SPLIMVIOL_Msk (1UL << FPU_FPCCR_SPLIMVIOL_Pos) /*!< FPCCR: SPLIMVIOL bit Mask */ - -#define FPU_FPCCR_MONRDY_Pos 8U /*!< FPCCR: MONRDY Position */ -#define FPU_FPCCR_MONRDY_Msk (1UL << FPU_FPCCR_MONRDY_Pos) /*!< FPCCR: MONRDY bit Mask */ - -#define FPU_FPCCR_SFRDY_Pos 7U /*!< FPCCR: SFRDY Position */ -#define FPU_FPCCR_SFRDY_Msk (1UL << FPU_FPCCR_SFRDY_Pos) /*!< FPCCR: SFRDY bit Mask */ - -#define FPU_FPCCR_BFRDY_Pos 6U /*!< FPCCR: BFRDY Position */ -#define FPU_FPCCR_BFRDY_Msk (1UL << FPU_FPCCR_BFRDY_Pos) /*!< FPCCR: BFRDY bit Mask */ - -#define FPU_FPCCR_MMRDY_Pos 5U /*!< FPCCR: MMRDY Position */ -#define FPU_FPCCR_MMRDY_Msk (1UL << FPU_FPCCR_MMRDY_Pos) /*!< FPCCR: MMRDY bit Mask */ - -#define FPU_FPCCR_HFRDY_Pos 4U /*!< FPCCR: HFRDY Position */ -#define FPU_FPCCR_HFRDY_Msk (1UL << FPU_FPCCR_HFRDY_Pos) /*!< FPCCR: HFRDY bit Mask */ - -#define FPU_FPCCR_THREAD_Pos 3U /*!< FPCCR: processor mode bit Position */ -#define FPU_FPCCR_THREAD_Msk (1UL << FPU_FPCCR_THREAD_Pos) /*!< FPCCR: processor mode active bit Mask */ - -#define FPU_FPCCR_S_Pos 2U /*!< FPCCR: Security status of the FP context bit Position */ -#define FPU_FPCCR_S_Msk (1UL << FPU_FPCCR_S_Pos) /*!< FPCCR: Security status of the FP context bit Mask */ - -#define FPU_FPCCR_USER_Pos 1U /*!< FPCCR: privilege level bit Position */ -#define FPU_FPCCR_USER_Msk (1UL << FPU_FPCCR_USER_Pos) /*!< FPCCR: privilege level bit Mask */ - -#define FPU_FPCCR_LSPACT_Pos 0U /*!< FPCCR: Lazy state preservation active bit Position */ -#define FPU_FPCCR_LSPACT_Msk (1UL /*<< FPU_FPCCR_LSPACT_Pos*/) /*!< FPCCR: Lazy state preservation active bit Mask */ - -/* Floating-Point Context Address Register Definitions */ -#define FPU_FPCAR_ADDRESS_Pos 3U /*!< FPCAR: ADDRESS bit Position */ -#define FPU_FPCAR_ADDRESS_Msk (0x1FFFFFFFUL << FPU_FPCAR_ADDRESS_Pos) /*!< FPCAR: ADDRESS bit Mask */ - -/* Floating-Point Default Status Control Register Definitions */ -#define FPU_FPDSCR_AHP_Pos 26U /*!< FPDSCR: AHP bit Position */ -#define FPU_FPDSCR_AHP_Msk (1UL << FPU_FPDSCR_AHP_Pos) /*!< FPDSCR: AHP bit Mask */ - -#define FPU_FPDSCR_DN_Pos 25U /*!< FPDSCR: DN bit Position */ -#define FPU_FPDSCR_DN_Msk (1UL << FPU_FPDSCR_DN_Pos) /*!< FPDSCR: DN bit Mask */ - -#define FPU_FPDSCR_FZ_Pos 24U /*!< FPDSCR: FZ bit Position */ -#define FPU_FPDSCR_FZ_Msk (1UL << FPU_FPDSCR_FZ_Pos) /*!< FPDSCR: FZ bit Mask */ - -#define FPU_FPDSCR_RMode_Pos 22U /*!< FPDSCR: RMode bit Position */ -#define FPU_FPDSCR_RMode_Msk (3UL << FPU_FPDSCR_RMode_Pos) /*!< FPDSCR: RMode bit Mask */ - -/* Media and FP Feature Register 0 Definitions */ -#define FPU_MVFR0_FP_rounding_modes_Pos 28U /*!< MVFR0: FP rounding modes bits Position */ -#define FPU_MVFR0_FP_rounding_modes_Msk (0xFUL << FPU_MVFR0_FP_rounding_modes_Pos) /*!< MVFR0: FP rounding modes bits Mask */ - -#define FPU_MVFR0_Short_vectors_Pos 24U /*!< MVFR0: Short vectors bits Position */ -#define FPU_MVFR0_Short_vectors_Msk (0xFUL << FPU_MVFR0_Short_vectors_Pos) /*!< MVFR0: Short vectors bits Mask */ - -#define FPU_MVFR0_Square_root_Pos 20U /*!< MVFR0: Square root bits Position */ -#define FPU_MVFR0_Square_root_Msk (0xFUL << FPU_MVFR0_Square_root_Pos) /*!< MVFR0: Square root bits Mask */ - -#define FPU_MVFR0_Divide_Pos 16U /*!< MVFR0: Divide bits Position */ -#define FPU_MVFR0_Divide_Msk (0xFUL << FPU_MVFR0_Divide_Pos) /*!< MVFR0: Divide bits Mask */ - -#define FPU_MVFR0_FP_excep_trapping_Pos 12U /*!< MVFR0: FP exception trapping bits Position */ -#define FPU_MVFR0_FP_excep_trapping_Msk (0xFUL << FPU_MVFR0_FP_excep_trapping_Pos) /*!< MVFR0: FP exception trapping bits Mask */ - -#define FPU_MVFR0_Double_precision_Pos 8U /*!< MVFR0: Double-precision bits Position */ -#define FPU_MVFR0_Double_precision_Msk (0xFUL << FPU_MVFR0_Double_precision_Pos) /*!< MVFR0: Double-precision bits Mask */ - -#define FPU_MVFR0_Single_precision_Pos 4U /*!< MVFR0: Single-precision bits Position */ -#define FPU_MVFR0_Single_precision_Msk (0xFUL << FPU_MVFR0_Single_precision_Pos) /*!< MVFR0: Single-precision bits Mask */ - -#define FPU_MVFR0_A_SIMD_registers_Pos 0U /*!< MVFR0: A_SIMD registers bits Position */ -#define FPU_MVFR0_A_SIMD_registers_Msk (0xFUL /*<< FPU_MVFR0_A_SIMD_registers_Pos*/) /*!< MVFR0: A_SIMD registers bits Mask */ - -/* Media and FP Feature Register 1 Definitions */ -#define FPU_MVFR1_FP_fused_MAC_Pos 28U /*!< MVFR1: FP fused MAC bits Position */ -#define FPU_MVFR1_FP_fused_MAC_Msk (0xFUL << FPU_MVFR1_FP_fused_MAC_Pos) /*!< MVFR1: FP fused MAC bits Mask */ - -#define FPU_MVFR1_FP_HPFP_Pos 24U /*!< MVFR1: FP HPFP bits Position */ -#define FPU_MVFR1_FP_HPFP_Msk (0xFUL << FPU_MVFR1_FP_HPFP_Pos) /*!< MVFR1: FP HPFP bits Mask */ - -#define FPU_MVFR1_D_NaN_mode_Pos 4U /*!< MVFR1: D_NaN mode bits Position */ -#define FPU_MVFR1_D_NaN_mode_Msk (0xFUL << FPU_MVFR1_D_NaN_mode_Pos) /*!< MVFR1: D_NaN mode bits Mask */ - -#define FPU_MVFR1_FtZ_mode_Pos 0U /*!< MVFR1: FtZ mode bits Position */ -#define FPU_MVFR1_FtZ_mode_Msk (0xFUL /*<< FPU_MVFR1_FtZ_mode_Pos*/) /*!< MVFR1: FtZ mode bits Mask */ - -/*@} end of group CMSIS_FPU */ - - -/** - \ingroup CMSIS_core_register - \defgroup CMSIS_CoreDebug Core Debug Registers (CoreDebug) - \brief Type definitions for the Core Debug Registers - @{ - */ - -/** - \brief Structure type to access the Core Debug Register (CoreDebug). - */ -typedef struct -{ - __IOM uint32_t DHCSR; /*!< Offset: 0x000 (R/W) Debug Halting Control and Status Register */ - __OM uint32_t DCRSR; /*!< Offset: 0x004 ( /W) Debug Core Register Selector Register */ - __IOM uint32_t DCRDR; /*!< Offset: 0x008 (R/W) Debug Core Register Data Register */ - __IOM uint32_t DEMCR; /*!< Offset: 0x00C (R/W) Debug Exception and Monitor Control Register */ - uint32_t RESERVED4[1U]; - __IOM uint32_t DAUTHCTRL; /*!< Offset: 0x014 (R/W) Debug Authentication Control Register */ - __IOM uint32_t DSCSR; /*!< Offset: 0x018 (R/W) Debug Security Control and Status Register */ -} CoreDebug_Type; - -/* Debug Halting Control and Status Register Definitions */ -#define CoreDebug_DHCSR_DBGKEY_Pos 16U /*!< CoreDebug DHCSR: DBGKEY Position */ -#define CoreDebug_DHCSR_DBGKEY_Msk (0xFFFFUL << CoreDebug_DHCSR_DBGKEY_Pos) /*!< CoreDebug DHCSR: DBGKEY Mask */ - -#define CoreDebug_DHCSR_S_RESTART_ST_Pos 26U /*!< CoreDebug DHCSR: S_RESTART_ST Position */ -#define CoreDebug_DHCSR_S_RESTART_ST_Msk (1UL << CoreDebug_DHCSR_S_RESTART_ST_Pos) /*!< CoreDebug DHCSR: S_RESTART_ST Mask */ - -#define CoreDebug_DHCSR_S_RESET_ST_Pos 25U /*!< CoreDebug DHCSR: S_RESET_ST Position */ -#define CoreDebug_DHCSR_S_RESET_ST_Msk (1UL << CoreDebug_DHCSR_S_RESET_ST_Pos) /*!< CoreDebug DHCSR: S_RESET_ST Mask */ - -#define CoreDebug_DHCSR_S_RETIRE_ST_Pos 24U /*!< CoreDebug DHCSR: S_RETIRE_ST Position */ -#define CoreDebug_DHCSR_S_RETIRE_ST_Msk (1UL << CoreDebug_DHCSR_S_RETIRE_ST_Pos) /*!< CoreDebug DHCSR: S_RETIRE_ST Mask */ - -#define CoreDebug_DHCSR_S_LOCKUP_Pos 19U /*!< CoreDebug DHCSR: S_LOCKUP Position */ -#define CoreDebug_DHCSR_S_LOCKUP_Msk (1UL << CoreDebug_DHCSR_S_LOCKUP_Pos) /*!< CoreDebug DHCSR: S_LOCKUP Mask */ - -#define CoreDebug_DHCSR_S_SLEEP_Pos 18U /*!< CoreDebug DHCSR: S_SLEEP Position */ -#define CoreDebug_DHCSR_S_SLEEP_Msk (1UL << CoreDebug_DHCSR_S_SLEEP_Pos) /*!< CoreDebug DHCSR: S_SLEEP Mask */ - -#define CoreDebug_DHCSR_S_HALT_Pos 17U /*!< CoreDebug DHCSR: S_HALT Position */ -#define CoreDebug_DHCSR_S_HALT_Msk (1UL << CoreDebug_DHCSR_S_HALT_Pos) /*!< CoreDebug DHCSR: S_HALT Mask */ - -#define CoreDebug_DHCSR_S_REGRDY_Pos 16U /*!< CoreDebug DHCSR: S_REGRDY Position */ -#define CoreDebug_DHCSR_S_REGRDY_Msk (1UL << CoreDebug_DHCSR_S_REGRDY_Pos) /*!< CoreDebug DHCSR: S_REGRDY Mask */ - -#define CoreDebug_DHCSR_C_SNAPSTALL_Pos 5U /*!< CoreDebug DHCSR: C_SNAPSTALL Position */ -#define CoreDebug_DHCSR_C_SNAPSTALL_Msk (1UL << CoreDebug_DHCSR_C_SNAPSTALL_Pos) /*!< CoreDebug DHCSR: C_SNAPSTALL Mask */ - -#define CoreDebug_DHCSR_C_MASKINTS_Pos 3U /*!< CoreDebug DHCSR: C_MASKINTS Position */ -#define CoreDebug_DHCSR_C_MASKINTS_Msk (1UL << CoreDebug_DHCSR_C_MASKINTS_Pos) /*!< CoreDebug DHCSR: C_MASKINTS Mask */ - -#define CoreDebug_DHCSR_C_STEP_Pos 2U /*!< CoreDebug DHCSR: C_STEP Position */ -#define CoreDebug_DHCSR_C_STEP_Msk (1UL << CoreDebug_DHCSR_C_STEP_Pos) /*!< CoreDebug DHCSR: C_STEP Mask */ - -#define CoreDebug_DHCSR_C_HALT_Pos 1U /*!< CoreDebug DHCSR: C_HALT Position */ -#define CoreDebug_DHCSR_C_HALT_Msk (1UL << CoreDebug_DHCSR_C_HALT_Pos) /*!< CoreDebug DHCSR: C_HALT Mask */ - -#define CoreDebug_DHCSR_C_DEBUGEN_Pos 0U /*!< CoreDebug DHCSR: C_DEBUGEN Position */ -#define CoreDebug_DHCSR_C_DEBUGEN_Msk (1UL /*<< CoreDebug_DHCSR_C_DEBUGEN_Pos*/) /*!< CoreDebug DHCSR: C_DEBUGEN Mask */ - -/* Debug Core Register Selector Register Definitions */ -#define CoreDebug_DCRSR_REGWnR_Pos 16U /*!< CoreDebug DCRSR: REGWnR Position */ -#define CoreDebug_DCRSR_REGWnR_Msk (1UL << CoreDebug_DCRSR_REGWnR_Pos) /*!< CoreDebug DCRSR: REGWnR Mask */ - -#define CoreDebug_DCRSR_REGSEL_Pos 0U /*!< CoreDebug DCRSR: REGSEL Position */ -#define CoreDebug_DCRSR_REGSEL_Msk (0x1FUL /*<< CoreDebug_DCRSR_REGSEL_Pos*/) /*!< CoreDebug DCRSR: REGSEL Mask */ - -/* Debug Exception and Monitor Control Register Definitions */ -#define CoreDebug_DEMCR_TRCENA_Pos 24U /*!< CoreDebug DEMCR: TRCENA Position */ -#define CoreDebug_DEMCR_TRCENA_Msk (1UL << CoreDebug_DEMCR_TRCENA_Pos) /*!< CoreDebug DEMCR: TRCENA Mask */ - -#define CoreDebug_DEMCR_MON_REQ_Pos 19U /*!< CoreDebug DEMCR: MON_REQ Position */ -#define CoreDebug_DEMCR_MON_REQ_Msk (1UL << CoreDebug_DEMCR_MON_REQ_Pos) /*!< CoreDebug DEMCR: MON_REQ Mask */ - -#define CoreDebug_DEMCR_MON_STEP_Pos 18U /*!< CoreDebug DEMCR: MON_STEP Position */ -#define CoreDebug_DEMCR_MON_STEP_Msk (1UL << CoreDebug_DEMCR_MON_STEP_Pos) /*!< CoreDebug DEMCR: MON_STEP Mask */ - -#define CoreDebug_DEMCR_MON_PEND_Pos 17U /*!< CoreDebug DEMCR: MON_PEND Position */ -#define CoreDebug_DEMCR_MON_PEND_Msk (1UL << CoreDebug_DEMCR_MON_PEND_Pos) /*!< CoreDebug DEMCR: MON_PEND Mask */ - -#define CoreDebug_DEMCR_MON_EN_Pos 16U /*!< CoreDebug DEMCR: MON_EN Position */ -#define CoreDebug_DEMCR_MON_EN_Msk (1UL << CoreDebug_DEMCR_MON_EN_Pos) /*!< CoreDebug DEMCR: MON_EN Mask */ - -#define CoreDebug_DEMCR_VC_HARDERR_Pos 10U /*!< CoreDebug DEMCR: VC_HARDERR Position */ -#define CoreDebug_DEMCR_VC_HARDERR_Msk (1UL << CoreDebug_DEMCR_VC_HARDERR_Pos) /*!< CoreDebug DEMCR: VC_HARDERR Mask */ - -#define CoreDebug_DEMCR_VC_INTERR_Pos 9U /*!< CoreDebug DEMCR: VC_INTERR Position */ -#define CoreDebug_DEMCR_VC_INTERR_Msk (1UL << CoreDebug_DEMCR_VC_INTERR_Pos) /*!< CoreDebug DEMCR: VC_INTERR Mask */ - -#define CoreDebug_DEMCR_VC_BUSERR_Pos 8U /*!< CoreDebug DEMCR: VC_BUSERR Position */ -#define CoreDebug_DEMCR_VC_BUSERR_Msk (1UL << CoreDebug_DEMCR_VC_BUSERR_Pos) /*!< CoreDebug DEMCR: VC_BUSERR Mask */ - -#define CoreDebug_DEMCR_VC_STATERR_Pos 7U /*!< CoreDebug DEMCR: VC_STATERR Position */ -#define CoreDebug_DEMCR_VC_STATERR_Msk (1UL << CoreDebug_DEMCR_VC_STATERR_Pos) /*!< CoreDebug DEMCR: VC_STATERR Mask */ - -#define CoreDebug_DEMCR_VC_CHKERR_Pos 6U /*!< CoreDebug DEMCR: VC_CHKERR Position */ -#define CoreDebug_DEMCR_VC_CHKERR_Msk (1UL << CoreDebug_DEMCR_VC_CHKERR_Pos) /*!< CoreDebug DEMCR: VC_CHKERR Mask */ - -#define CoreDebug_DEMCR_VC_NOCPERR_Pos 5U /*!< CoreDebug DEMCR: VC_NOCPERR Position */ -#define CoreDebug_DEMCR_VC_NOCPERR_Msk (1UL << CoreDebug_DEMCR_VC_NOCPERR_Pos) /*!< CoreDebug DEMCR: VC_NOCPERR Mask */ - -#define CoreDebug_DEMCR_VC_MMERR_Pos 4U /*!< CoreDebug DEMCR: VC_MMERR Position */ -#define CoreDebug_DEMCR_VC_MMERR_Msk (1UL << CoreDebug_DEMCR_VC_MMERR_Pos) /*!< CoreDebug DEMCR: VC_MMERR Mask */ - -#define CoreDebug_DEMCR_VC_CORERESET_Pos 0U /*!< CoreDebug DEMCR: VC_CORERESET Position */ -#define CoreDebug_DEMCR_VC_CORERESET_Msk (1UL /*<< CoreDebug_DEMCR_VC_CORERESET_Pos*/) /*!< CoreDebug DEMCR: VC_CORERESET Mask */ - -/* Debug Authentication Control Register Definitions */ -#define CoreDebug_DAUTHCTRL_INTSPNIDEN_Pos 3U /*!< CoreDebug DAUTHCTRL: INTSPNIDEN, Position */ -#define CoreDebug_DAUTHCTRL_INTSPNIDEN_Msk (1UL << CoreDebug_DAUTHCTRL_INTSPNIDEN_Pos) /*!< CoreDebug DAUTHCTRL: INTSPNIDEN, Mask */ - -#define CoreDebug_DAUTHCTRL_SPNIDENSEL_Pos 2U /*!< CoreDebug DAUTHCTRL: SPNIDENSEL Position */ -#define CoreDebug_DAUTHCTRL_SPNIDENSEL_Msk (1UL << CoreDebug_DAUTHCTRL_SPNIDENSEL_Pos) /*!< CoreDebug DAUTHCTRL: SPNIDENSEL Mask */ - -#define CoreDebug_DAUTHCTRL_INTSPIDEN_Pos 1U /*!< CoreDebug DAUTHCTRL: INTSPIDEN Position */ -#define CoreDebug_DAUTHCTRL_INTSPIDEN_Msk (1UL << CoreDebug_DAUTHCTRL_INTSPIDEN_Pos) /*!< CoreDebug DAUTHCTRL: INTSPIDEN Mask */ - -#define CoreDebug_DAUTHCTRL_SPIDENSEL_Pos 0U /*!< CoreDebug DAUTHCTRL: SPIDENSEL Position */ -#define CoreDebug_DAUTHCTRL_SPIDENSEL_Msk (1UL /*<< CoreDebug_DAUTHCTRL_SPIDENSEL_Pos*/) /*!< CoreDebug DAUTHCTRL: SPIDENSEL Mask */ - -/* Debug Security Control and Status Register Definitions */ -#define CoreDebug_DSCSR_CDS_Pos 16U /*!< CoreDebug DSCSR: CDS Position */ -#define CoreDebug_DSCSR_CDS_Msk (1UL << CoreDebug_DSCSR_CDS_Pos) /*!< CoreDebug DSCSR: CDS Mask */ - -#define CoreDebug_DSCSR_SBRSEL_Pos 1U /*!< CoreDebug DSCSR: SBRSEL Position */ -#define CoreDebug_DSCSR_SBRSEL_Msk (1UL << CoreDebug_DSCSR_SBRSEL_Pos) /*!< CoreDebug DSCSR: SBRSEL Mask */ - -#define CoreDebug_DSCSR_SBRSELEN_Pos 0U /*!< CoreDebug DSCSR: SBRSELEN Position */ -#define CoreDebug_DSCSR_SBRSELEN_Msk (1UL /*<< CoreDebug_DSCSR_SBRSELEN_Pos*/) /*!< CoreDebug DSCSR: SBRSELEN Mask */ - -/*@} end of group CMSIS_CoreDebug */ - - -/** - \ingroup CMSIS_core_register - \defgroup CMSIS_core_bitfield Core register bit field macros - \brief Macros for use with bit field definitions (xxx_Pos, xxx_Msk). - @{ - */ - -/** - \brief Mask and shift a bit field value for use in a register bit range. - \param[in] field Name of the register bit field. - \param[in] value Value of the bit field. This parameter is interpreted as an uint32_t type. - \return Masked and shifted value. -*/ -#define _VAL2FLD(field, value) (((uint32_t)(value) << field ## _Pos) & field ## _Msk) - -/** - \brief Mask and shift a register value to extract a bit filed value. - \param[in] field Name of the register bit field. - \param[in] value Value of register. This parameter is interpreted as an uint32_t type. - \return Masked and shifted bit field value. -*/ -#define _FLD2VAL(field, value) (((uint32_t)(value) & field ## _Msk) >> field ## _Pos) - -/*@} end of group CMSIS_core_bitfield */ - - -/** - \ingroup CMSIS_core_register - \defgroup CMSIS_core_base Core Definitions - \brief Definitions for base addresses, unions, and structures. - @{ - */ - -/* Memory mapping of Core Hardware */ - #define SCS_BASE (0xE000E000UL) /*!< System Control Space Base Address */ - #define ITM_BASE (0xE0000000UL) /*!< ITM Base Address */ - #define DWT_BASE (0xE0001000UL) /*!< DWT Base Address */ - #define TPI_BASE (0xE0040000UL) /*!< TPI Base Address */ - #define CoreDebug_BASE (0xE000EDF0UL) /*!< Core Debug Base Address */ - #define SysTick_BASE (SCS_BASE + 0x0010UL) /*!< SysTick Base Address */ - #define NVIC_BASE (SCS_BASE + 0x0100UL) /*!< NVIC Base Address */ - #define SCB_BASE (SCS_BASE + 0x0D00UL) /*!< System Control Block Base Address */ - - #define SCnSCB ((SCnSCB_Type *) SCS_BASE ) /*!< System control Register not in SCB */ - #define SCB ((SCB_Type *) SCB_BASE ) /*!< SCB configuration struct */ - #define SysTick ((SysTick_Type *) SysTick_BASE ) /*!< SysTick configuration struct */ - #define NVIC ((NVIC_Type *) NVIC_BASE ) /*!< NVIC configuration struct */ - #define ITM ((ITM_Type *) ITM_BASE ) /*!< ITM configuration struct */ - #define DWT ((DWT_Type *) DWT_BASE ) /*!< DWT configuration struct */ - #define TPI ((TPI_Type *) TPI_BASE ) /*!< TPI configuration struct */ - #define CoreDebug ((CoreDebug_Type *) CoreDebug_BASE ) /*!< Core Debug configuration struct */ - - #if defined (__MPU_PRESENT) && (__MPU_PRESENT == 1U) - #define MPU_BASE (SCS_BASE + 0x0D90UL) /*!< Memory Protection Unit */ - #define MPU ((MPU_Type *) MPU_BASE ) /*!< Memory Protection Unit */ - #endif - - #if defined (__ARM_FEATURE_CMSE) && (__ARM_FEATURE_CMSE == 3U) - #define SAU_BASE (SCS_BASE + 0x0DD0UL) /*!< Security Attribution Unit */ - #define SAU ((SAU_Type *) SAU_BASE ) /*!< Security Attribution Unit */ - #endif - - #define FPU_BASE (SCS_BASE + 0x0F30UL) /*!< Floating Point Unit */ - #define FPU ((FPU_Type *) FPU_BASE ) /*!< Floating Point Unit */ - -#if defined (__ARM_FEATURE_CMSE) && (__ARM_FEATURE_CMSE == 3U) - #define SCS_BASE_NS (0xE002E000UL) /*!< System Control Space Base Address (non-secure address space) */ - #define CoreDebug_BASE_NS (0xE002EDF0UL) /*!< Core Debug Base Address (non-secure address space) */ - #define SysTick_BASE_NS (SCS_BASE_NS + 0x0010UL) /*!< SysTick Base Address (non-secure address space) */ - #define NVIC_BASE_NS (SCS_BASE_NS + 0x0100UL) /*!< NVIC Base Address (non-secure address space) */ - #define SCB_BASE_NS (SCS_BASE_NS + 0x0D00UL) /*!< System Control Block Base Address (non-secure address space) */ - - #define SCnSCB_NS ((SCnSCB_Type *) SCS_BASE_NS ) /*!< System control Register not in SCB(non-secure address space) */ - #define SCB_NS ((SCB_Type *) SCB_BASE_NS ) /*!< SCB configuration struct (non-secure address space) */ - #define SysTick_NS ((SysTick_Type *) SysTick_BASE_NS ) /*!< SysTick configuration struct (non-secure address space) */ - #define NVIC_NS ((NVIC_Type *) NVIC_BASE_NS ) /*!< NVIC configuration struct (non-secure address space) */ - #define CoreDebug_NS ((CoreDebug_Type *) CoreDebug_BASE_NS) /*!< Core Debug configuration struct (non-secure address space) */ - - #if defined (__MPU_PRESENT) && (__MPU_PRESENT == 1U) - #define MPU_BASE_NS (SCS_BASE_NS + 0x0D90UL) /*!< Memory Protection Unit (non-secure address space) */ - #define MPU_NS ((MPU_Type *) MPU_BASE_NS ) /*!< Memory Protection Unit (non-secure address space) */ - #endif - - #define FPU_BASE_NS (SCS_BASE_NS + 0x0F30UL) /*!< Floating Point Unit (non-secure address space) */ - #define FPU_NS ((FPU_Type *) FPU_BASE_NS ) /*!< Floating Point Unit (non-secure address space) */ - -#endif /* defined (__ARM_FEATURE_CMSE) && (__ARM_FEATURE_CMSE == 3U) */ -/*@} */ - - - -/******************************************************************************* - * Hardware Abstraction Layer - Core Function Interface contains: - - Core NVIC Functions - - Core SysTick Functions - - Core Debug Functions - - Core Register Access Functions - ******************************************************************************/ -/** - \defgroup CMSIS_Core_FunctionInterface Functions and Instructions Reference -*/ - - - -/* ########################## NVIC functions #################################### */ -/** - \ingroup CMSIS_Core_FunctionInterface - \defgroup CMSIS_Core_NVICFunctions NVIC Functions - \brief Functions that manage interrupts and exceptions via the NVIC. - @{ - */ - -#ifdef CMSIS_NVIC_VIRTUAL - #ifndef CMSIS_NVIC_VIRTUAL_HEADER_FILE - #define CMSIS_NVIC_VIRTUAL_HEADER_FILE "cmsis_nvic_virtual.h" - #endif - #include CMSIS_NVIC_VIRTUAL_HEADER_FILE -#else - #define NVIC_SetPriorityGrouping __NVIC_SetPriorityGrouping - #define NVIC_GetPriorityGrouping __NVIC_GetPriorityGrouping - #define NVIC_EnableIRQ __NVIC_EnableIRQ - #define NVIC_GetEnableIRQ __NVIC_GetEnableIRQ - #define NVIC_DisableIRQ __NVIC_DisableIRQ - #define NVIC_GetPendingIRQ __NVIC_GetPendingIRQ - #define NVIC_SetPendingIRQ __NVIC_SetPendingIRQ - #define NVIC_ClearPendingIRQ __NVIC_ClearPendingIRQ - #define NVIC_GetActive __NVIC_GetActive - #define NVIC_SetPriority __NVIC_SetPriority - #define NVIC_GetPriority __NVIC_GetPriority - #define NVIC_SystemReset __NVIC_SystemReset -#endif /* CMSIS_NVIC_VIRTUAL */ - -#ifdef CMSIS_VECTAB_VIRTUAL - #ifndef CMSIS_VECTAB_VIRTUAL_HEADER_FILE - #define CMSIS_VECTAB_VIRTUAL_HEADER_FILE "cmsis_vectab_virtual.h" - #endif - #include CMSIS_VECTAB_VIRTUAL_HEADER_FILE -#else - #define NVIC_SetVector __NVIC_SetVector - #define NVIC_GetVector __NVIC_GetVector -#endif /* (CMSIS_VECTAB_VIRTUAL) */ - -#define NVIC_USER_IRQ_OFFSET 16 - - -/* Special LR values for Secure/Non-Secure call handling and exception handling */ - -/* Function Return Payload (from ARMv8-M Architecture Reference Manual) LR value on entry from Secure BLXNS */ -#define FNC_RETURN (0xFEFFFFFFUL) /* bit [0] ignored when processing a branch */ - -/* The following EXC_RETURN mask values are used to evaluate the LR on exception entry */ -#define EXC_RETURN_PREFIX (0xFF000000UL) /* bits [31:24] set to indicate an EXC_RETURN value */ -#define EXC_RETURN_S (0x00000040UL) /* bit [6] stack used to push registers: 0=Non-secure 1=Secure */ -#define EXC_RETURN_DCRS (0x00000020UL) /* bit [5] stacking rules for called registers: 0=skipped 1=saved */ -#define EXC_RETURN_FTYPE (0x00000010UL) /* bit [4] allocate stack for floating-point context: 0=done 1=skipped */ -#define EXC_RETURN_MODE (0x00000008UL) /* bit [3] processor mode for return: 0=Handler mode 1=Thread mode */ -#define EXC_RETURN_SPSEL (0x00000002UL) /* bit [1] stack pointer used to restore context: 0=MSP 1=PSP */ -#define EXC_RETURN_ES (0x00000001UL) /* bit [0] security state exception was taken to: 0=Non-secure 1=Secure */ - -/* Integrity Signature (from ARMv8-M Architecture Reference Manual) for exception context stacking */ -#if defined (__FPU_PRESENT) && (__FPU_PRESENT == 1U) /* Value for processors with floating-point extension: */ -#define EXC_INTEGRITY_SIGNATURE (0xFEFA125AUL) /* bit [0] SFTC must match LR bit[4] EXC_RETURN_FTYPE */ -#else -#define EXC_INTEGRITY_SIGNATURE (0xFEFA125BUL) /* Value for processors without floating-point extension */ -#endif - - -/** - \brief Set Priority Grouping - \details Sets the priority grouping field using the required unlock sequence. - The parameter PriorityGroup is assigned to the field SCB->AIRCR [10:8] PRIGROUP field. - Only values from 0..7 are used. - In case of a conflict between priority grouping and available - priority bits (__NVIC_PRIO_BITS), the smallest possible priority group is set. - \param [in] PriorityGroup Priority grouping field. - */ -__STATIC_INLINE void __NVIC_SetPriorityGrouping(uint32_t PriorityGroup) -{ - uint32_t reg_value; - uint32_t PriorityGroupTmp = (PriorityGroup & (uint32_t)0x07UL); /* only values 0..7 are used */ - - reg_value = SCB->AIRCR; /* read old register configuration */ - reg_value &= ~((uint32_t)(SCB_AIRCR_VECTKEY_Msk | SCB_AIRCR_PRIGROUP_Msk)); /* clear bits to change */ - reg_value = (reg_value | - ((uint32_t)0x5FAUL << SCB_AIRCR_VECTKEY_Pos) | - (PriorityGroupTmp << 8U) ); /* Insert write key and priorty group */ - SCB->AIRCR = reg_value; -} - - -/** - \brief Get Priority Grouping - \details Reads the priority grouping field from the NVIC Interrupt Controller. - \return Priority grouping field (SCB->AIRCR [10:8] PRIGROUP field). - */ -__STATIC_INLINE uint32_t __NVIC_GetPriorityGrouping(void) -{ - return ((uint32_t)((SCB->AIRCR & SCB_AIRCR_PRIGROUP_Msk) >> SCB_AIRCR_PRIGROUP_Pos)); -} - - -/** - \brief Enable Interrupt - \details Enables a device specific interrupt in the NVIC interrupt controller. - \param [in] IRQn Device specific interrupt number. - \note IRQn must not be negative. - */ -__STATIC_INLINE void __NVIC_EnableIRQ(IRQn_Type IRQn) -{ - if ((int32_t)(IRQn) >= 0) - { - NVIC->ISER[(((uint32_t)IRQn) >> 5UL)] = (uint32_t)(1UL << (((uint32_t)IRQn) & 0x1FUL)); - } -} - - -/** - \brief Get Interrupt Enable status - \details Returns a device specific interrupt enable status from the NVIC interrupt controller. - \param [in] IRQn Device specific interrupt number. - \return 0 Interrupt is not enabled. - \return 1 Interrupt is enabled. - \note IRQn must not be negative. - */ -__STATIC_INLINE uint32_t __NVIC_GetEnableIRQ(IRQn_Type IRQn) -{ - if ((int32_t)(IRQn) >= 0) - { - return((uint32_t)(((NVIC->ISER[(((uint32_t)IRQn) >> 5UL)] & (1UL << (((uint32_t)IRQn) & 0x1FUL))) != 0UL) ? 1UL : 0UL)); - } - else - { - return(0U); - } -} - - -/** - \brief Disable Interrupt - \details Disables a device specific interrupt in the NVIC interrupt controller. - \param [in] IRQn Device specific interrupt number. - \note IRQn must not be negative. - */ -__STATIC_INLINE void __NVIC_DisableIRQ(IRQn_Type IRQn) -{ - if ((int32_t)(IRQn) >= 0) - { - NVIC->ICER[(((uint32_t)IRQn) >> 5UL)] = (uint32_t)(1UL << (((uint32_t)IRQn) & 0x1FUL)); - __DSB(); - __ISB(); - } -} - - -/** - \brief Get Pending Interrupt - \details Reads the NVIC pending register and returns the pending bit for the specified device specific interrupt. - \param [in] IRQn Device specific interrupt number. - \return 0 Interrupt status is not pending. - \return 1 Interrupt status is pending. - \note IRQn must not be negative. - */ -__STATIC_INLINE uint32_t __NVIC_GetPendingIRQ(IRQn_Type IRQn) -{ - if ((int32_t)(IRQn) >= 0) - { - return((uint32_t)(((NVIC->ISPR[(((uint32_t)IRQn) >> 5UL)] & (1UL << (((uint32_t)IRQn) & 0x1FUL))) != 0UL) ? 1UL : 0UL)); - } - else - { - return(0U); - } -} - - -/** - \brief Set Pending Interrupt - \details Sets the pending bit of a device specific interrupt in the NVIC pending register. - \param [in] IRQn Device specific interrupt number. - \note IRQn must not be negative. - */ -__STATIC_INLINE void __NVIC_SetPendingIRQ(IRQn_Type IRQn) -{ - if ((int32_t)(IRQn) >= 0) - { - NVIC->ISPR[(((uint32_t)IRQn) >> 5UL)] = (uint32_t)(1UL << (((uint32_t)IRQn) & 0x1FUL)); - } -} - - -/** - \brief Clear Pending Interrupt - \details Clears the pending bit of a device specific interrupt in the NVIC pending register. - \param [in] IRQn Device specific interrupt number. - \note IRQn must not be negative. - */ -__STATIC_INLINE void __NVIC_ClearPendingIRQ(IRQn_Type IRQn) -{ - if ((int32_t)(IRQn) >= 0) - { - NVIC->ICPR[(((uint32_t)IRQn) >> 5UL)] = (uint32_t)(1UL << (((uint32_t)IRQn) & 0x1FUL)); - } -} - - -/** - \brief Get Active Interrupt - \details Reads the active register in the NVIC and returns the active bit for the device specific interrupt. - \param [in] IRQn Device specific interrupt number. - \return 0 Interrupt status is not active. - \return 1 Interrupt status is active. - \note IRQn must not be negative. - */ -__STATIC_INLINE uint32_t __NVIC_GetActive(IRQn_Type IRQn) -{ - if ((int32_t)(IRQn) >= 0) - { - return((uint32_t)(((NVIC->IABR[(((uint32_t)IRQn) >> 5UL)] & (1UL << (((uint32_t)IRQn) & 0x1FUL))) != 0UL) ? 1UL : 0UL)); - } - else - { - return(0U); - } -} - - -#if defined (__ARM_FEATURE_CMSE) && (__ARM_FEATURE_CMSE == 3U) -/** - \brief Get Interrupt Target State - \details Reads the interrupt target field in the NVIC and returns the interrupt target bit for the device specific interrupt. - \param [in] IRQn Device specific interrupt number. - \return 0 if interrupt is assigned to Secure - \return 1 if interrupt is assigned to Non Secure - \note IRQn must not be negative. - */ -__STATIC_INLINE uint32_t NVIC_GetTargetState(IRQn_Type IRQn) -{ - if ((int32_t)(IRQn) >= 0) - { - return((uint32_t)(((NVIC->ITNS[(((uint32_t)IRQn) >> 5UL)] & (1UL << (((uint32_t)IRQn) & 0x1FUL))) != 0UL) ? 1UL : 0UL)); - } - else - { - return(0U); - } -} - - -/** - \brief Set Interrupt Target State - \details Sets the interrupt target field in the NVIC and returns the interrupt target bit for the device specific interrupt. - \param [in] IRQn Device specific interrupt number. - \return 0 if interrupt is assigned to Secure - 1 if interrupt is assigned to Non Secure - \note IRQn must not be negative. - */ -__STATIC_INLINE uint32_t NVIC_SetTargetState(IRQn_Type IRQn) -{ - if ((int32_t)(IRQn) >= 0) - { - NVIC->ITNS[(((uint32_t)IRQn) >> 5UL)] |= ((uint32_t)(1UL << (((uint32_t)IRQn) & 0x1FUL))); - return((uint32_t)(((NVIC->ITNS[(((uint32_t)IRQn) >> 5UL)] & (1UL << (((uint32_t)IRQn) & 0x1FUL))) != 0UL) ? 1UL : 0UL)); - } - else - { - return(0U); - } -} - - -/** - \brief Clear Interrupt Target State - \details Clears the interrupt target field in the NVIC and returns the interrupt target bit for the device specific interrupt. - \param [in] IRQn Device specific interrupt number. - \return 0 if interrupt is assigned to Secure - 1 if interrupt is assigned to Non Secure - \note IRQn must not be negative. - */ -__STATIC_INLINE uint32_t NVIC_ClearTargetState(IRQn_Type IRQn) -{ - if ((int32_t)(IRQn) >= 0) - { - NVIC->ITNS[(((uint32_t)IRQn) >> 5UL)] &= ~((uint32_t)(1UL << (((uint32_t)IRQn) & 0x1FUL))); - return((uint32_t)(((NVIC->ITNS[(((uint32_t)IRQn) >> 5UL)] & (1UL << (((uint32_t)IRQn) & 0x1FUL))) != 0UL) ? 1UL : 0UL)); - } - else - { - return(0U); - } -} -#endif /* defined (__ARM_FEATURE_CMSE) && (__ARM_FEATURE_CMSE == 3U) */ - - -/** - \brief Set Interrupt Priority - \details Sets the priority of a device specific interrupt or a processor exception. - The interrupt number can be positive to specify a device specific interrupt, - or negative to specify a processor exception. - \param [in] IRQn Interrupt number. - \param [in] priority Priority to set. - \note The priority cannot be set for every processor exception. - */ -__STATIC_INLINE void __NVIC_SetPriority(IRQn_Type IRQn, uint32_t priority) -{ - if ((int32_t)(IRQn) >= 0) - { - NVIC->IPR[((uint32_t)IRQn)] = (uint8_t)((priority << (8U - __NVIC_PRIO_BITS)) & (uint32_t)0xFFUL); - } - else - { - SCB->SHPR[(((uint32_t)IRQn) & 0xFUL)-4UL] = (uint8_t)((priority << (8U - __NVIC_PRIO_BITS)) & (uint32_t)0xFFUL); - } -} - - -/** - \brief Get Interrupt Priority - \details Reads the priority of a device specific interrupt or a processor exception. - The interrupt number can be positive to specify a device specific interrupt, - or negative to specify a processor exception. - \param [in] IRQn Interrupt number. - \return Interrupt Priority. - Value is aligned automatically to the implemented priority bits of the microcontroller. - */ -__STATIC_INLINE uint32_t __NVIC_GetPriority(IRQn_Type IRQn) -{ - - if ((int32_t)(IRQn) >= 0) - { - return(((uint32_t)NVIC->IPR[((uint32_t)IRQn)] >> (8U - __NVIC_PRIO_BITS))); - } - else - { - return(((uint32_t)SCB->SHPR[(((uint32_t)IRQn) & 0xFUL)-4UL] >> (8U - __NVIC_PRIO_BITS))); - } -} - - -/** - \brief Encode Priority - \details Encodes the priority for an interrupt with the given priority group, - preemptive priority value, and subpriority value. - In case of a conflict between priority grouping and available - priority bits (__NVIC_PRIO_BITS), the smallest possible priority group is set. - \param [in] PriorityGroup Used priority group. - \param [in] PreemptPriority Preemptive priority value (starting from 0). - \param [in] SubPriority Subpriority value (starting from 0). - \return Encoded priority. Value can be used in the function \ref NVIC_SetPriority(). - */ -__STATIC_INLINE uint32_t NVIC_EncodePriority (uint32_t PriorityGroup, uint32_t PreemptPriority, uint32_t SubPriority) -{ - uint32_t PriorityGroupTmp = (PriorityGroup & (uint32_t)0x07UL); /* only values 0..7 are used */ - uint32_t PreemptPriorityBits; - uint32_t SubPriorityBits; - - PreemptPriorityBits = ((7UL - PriorityGroupTmp) > (uint32_t)(__NVIC_PRIO_BITS)) ? (uint32_t)(__NVIC_PRIO_BITS) : (uint32_t)(7UL - PriorityGroupTmp); - SubPriorityBits = ((PriorityGroupTmp + (uint32_t)(__NVIC_PRIO_BITS)) < (uint32_t)7UL) ? (uint32_t)0UL : (uint32_t)((PriorityGroupTmp - 7UL) + (uint32_t)(__NVIC_PRIO_BITS)); - - return ( - ((PreemptPriority & (uint32_t)((1UL << (PreemptPriorityBits)) - 1UL)) << SubPriorityBits) | - ((SubPriority & (uint32_t)((1UL << (SubPriorityBits )) - 1UL))) - ); -} - - -/** - \brief Decode Priority - \details Decodes an interrupt priority value with a given priority group to - preemptive priority value and subpriority value. - In case of a conflict between priority grouping and available - priority bits (__NVIC_PRIO_BITS) the smallest possible priority group is set. - \param [in] Priority Priority value, which can be retrieved with the function \ref NVIC_GetPriority(). - \param [in] PriorityGroup Used priority group. - \param [out] pPreemptPriority Preemptive priority value (starting from 0). - \param [out] pSubPriority Subpriority value (starting from 0). - */ -__STATIC_INLINE void NVIC_DecodePriority (uint32_t Priority, uint32_t PriorityGroup, uint32_t* const pPreemptPriority, uint32_t* const pSubPriority) -{ - uint32_t PriorityGroupTmp = (PriorityGroup & (uint32_t)0x07UL); /* only values 0..7 are used */ - uint32_t PreemptPriorityBits; - uint32_t SubPriorityBits; - - PreemptPriorityBits = ((7UL - PriorityGroupTmp) > (uint32_t)(__NVIC_PRIO_BITS)) ? (uint32_t)(__NVIC_PRIO_BITS) : (uint32_t)(7UL - PriorityGroupTmp); - SubPriorityBits = ((PriorityGroupTmp + (uint32_t)(__NVIC_PRIO_BITS)) < (uint32_t)7UL) ? (uint32_t)0UL : (uint32_t)((PriorityGroupTmp - 7UL) + (uint32_t)(__NVIC_PRIO_BITS)); - - *pPreemptPriority = (Priority >> SubPriorityBits) & (uint32_t)((1UL << (PreemptPriorityBits)) - 1UL); - *pSubPriority = (Priority ) & (uint32_t)((1UL << (SubPriorityBits )) - 1UL); -} - - -/** - \brief Set Interrupt Vector - \details Sets an interrupt vector in SRAM based interrupt vector table. - The interrupt number can be positive to specify a device specific interrupt, - or negative to specify a processor exception. - VTOR must been relocated to SRAM before. - \param [in] IRQn Interrupt number - \param [in] vector Address of interrupt handler function - */ -__STATIC_INLINE void __NVIC_SetVector(IRQn_Type IRQn, uint32_t vector) -{ - uint32_t *vectors = (uint32_t *)SCB->VTOR; - vectors[(int32_t)IRQn + NVIC_USER_IRQ_OFFSET] = vector; -} - - -/** - \brief Get Interrupt Vector - \details Reads an interrupt vector from interrupt vector table. - The interrupt number can be positive to specify a device specific interrupt, - or negative to specify a processor exception. - \param [in] IRQn Interrupt number. - \return Address of interrupt handler function - */ -__STATIC_INLINE uint32_t __NVIC_GetVector(IRQn_Type IRQn) -{ - uint32_t *vectors = (uint32_t *)SCB->VTOR; - return vectors[(int32_t)IRQn + NVIC_USER_IRQ_OFFSET]; -} - - -/** - \brief System Reset - \details Initiates a system reset request to reset the MCU. - */ -__NO_RETURN __STATIC_INLINE void __NVIC_SystemReset(void) -{ - __DSB(); /* Ensure all outstanding memory accesses included - buffered write are completed before reset */ - SCB->AIRCR = (uint32_t)((0x5FAUL << SCB_AIRCR_VECTKEY_Pos) | - (SCB->AIRCR & SCB_AIRCR_PRIGROUP_Msk) | - SCB_AIRCR_SYSRESETREQ_Msk ); /* Keep priority group unchanged */ - __DSB(); /* Ensure completion of memory access */ - - for(;;) /* wait until reset */ - { - __NOP(); - } -} - -#if defined (__ARM_FEATURE_CMSE) && (__ARM_FEATURE_CMSE == 3U) -/** - \brief Set Priority Grouping (non-secure) - \details Sets the non-secure priority grouping field when in secure state using the required unlock sequence. - The parameter PriorityGroup is assigned to the field SCB->AIRCR [10:8] PRIGROUP field. - Only values from 0..7 are used. - In case of a conflict between priority grouping and available - priority bits (__NVIC_PRIO_BITS), the smallest possible priority group is set. - \param [in] PriorityGroup Priority grouping field. - */ -__STATIC_INLINE void TZ_NVIC_SetPriorityGrouping_NS(uint32_t PriorityGroup) -{ - uint32_t reg_value; - uint32_t PriorityGroupTmp = (PriorityGroup & (uint32_t)0x07UL); /* only values 0..7 are used */ - - reg_value = SCB_NS->AIRCR; /* read old register configuration */ - reg_value &= ~((uint32_t)(SCB_AIRCR_VECTKEY_Msk | SCB_AIRCR_PRIGROUP_Msk)); /* clear bits to change */ - reg_value = (reg_value | - ((uint32_t)0x5FAUL << SCB_AIRCR_VECTKEY_Pos) | - (PriorityGroupTmp << 8U) ); /* Insert write key and priorty group */ - SCB_NS->AIRCR = reg_value; -} - - -/** - \brief Get Priority Grouping (non-secure) - \details Reads the priority grouping field from the non-secure NVIC when in secure state. - \return Priority grouping field (SCB->AIRCR [10:8] PRIGROUP field). - */ -__STATIC_INLINE uint32_t TZ_NVIC_GetPriorityGrouping_NS(void) -{ - return ((uint32_t)((SCB_NS->AIRCR & SCB_AIRCR_PRIGROUP_Msk) >> SCB_AIRCR_PRIGROUP_Pos)); -} - - -/** - \brief Enable Interrupt (non-secure) - \details Enables a device specific interrupt in the non-secure NVIC interrupt controller when in secure state. - \param [in] IRQn Device specific interrupt number. - \note IRQn must not be negative. - */ -__STATIC_INLINE void TZ_NVIC_EnableIRQ_NS(IRQn_Type IRQn) -{ - if ((int32_t)(IRQn) >= 0) - { - NVIC_NS->ISER[(((uint32_t)IRQn) >> 5UL)] = (uint32_t)(1UL << (((uint32_t)IRQn) & 0x1FUL)); - } -} - - -/** - \brief Get Interrupt Enable status (non-secure) - \details Returns a device specific interrupt enable status from the non-secure NVIC interrupt controller when in secure state. - \param [in] IRQn Device specific interrupt number. - \return 0 Interrupt is not enabled. - \return 1 Interrupt is enabled. - \note IRQn must not be negative. - */ -__STATIC_INLINE uint32_t TZ_NVIC_GetEnableIRQ_NS(IRQn_Type IRQn) -{ - if ((int32_t)(IRQn) >= 0) - { - return((uint32_t)(((NVIC_NS->ISER[(((uint32_t)IRQn) >> 5UL)] & (1UL << (((uint32_t)IRQn) & 0x1FUL))) != 0UL) ? 1UL : 0UL)); - } - else - { - return(0U); - } -} - - -/** - \brief Disable Interrupt (non-secure) - \details Disables a device specific interrupt in the non-secure NVIC interrupt controller when in secure state. - \param [in] IRQn Device specific interrupt number. - \note IRQn must not be negative. - */ -__STATIC_INLINE void TZ_NVIC_DisableIRQ_NS(IRQn_Type IRQn) -{ - if ((int32_t)(IRQn) >= 0) - { - NVIC_NS->ICER[(((uint32_t)IRQn) >> 5UL)] = (uint32_t)(1UL << (((uint32_t)IRQn) & 0x1FUL)); - } -} - - -/** - \brief Get Pending Interrupt (non-secure) - \details Reads the NVIC pending register in the non-secure NVIC when in secure state and returns the pending bit for the specified device specific interrupt. - \param [in] IRQn Device specific interrupt number. - \return 0 Interrupt status is not pending. - \return 1 Interrupt status is pending. - \note IRQn must not be negative. - */ -__STATIC_INLINE uint32_t TZ_NVIC_GetPendingIRQ_NS(IRQn_Type IRQn) -{ - if ((int32_t)(IRQn) >= 0) - { - return((uint32_t)(((NVIC_NS->ISPR[(((uint32_t)IRQn) >> 5UL)] & (1UL << (((uint32_t)IRQn) & 0x1FUL))) != 0UL) ? 1UL : 0UL)); - } - else - { - return(0U); - } -} - - -/** - \brief Set Pending Interrupt (non-secure) - \details Sets the pending bit of a device specific interrupt in the non-secure NVIC pending register when in secure state. - \param [in] IRQn Device specific interrupt number. - \note IRQn must not be negative. - */ -__STATIC_INLINE void TZ_NVIC_SetPendingIRQ_NS(IRQn_Type IRQn) -{ - if ((int32_t)(IRQn) >= 0) - { - NVIC_NS->ISPR[(((uint32_t)IRQn) >> 5UL)] = (uint32_t)(1UL << (((uint32_t)IRQn) & 0x1FUL)); - } -} - - -/** - \brief Clear Pending Interrupt (non-secure) - \details Clears the pending bit of a device specific interrupt in the non-secure NVIC pending register when in secure state. - \param [in] IRQn Device specific interrupt number. - \note IRQn must not be negative. - */ -__STATIC_INLINE void TZ_NVIC_ClearPendingIRQ_NS(IRQn_Type IRQn) -{ - if ((int32_t)(IRQn) >= 0) - { - NVIC_NS->ICPR[(((uint32_t)IRQn) >> 5UL)] = (uint32_t)(1UL << (((uint32_t)IRQn) & 0x1FUL)); - } -} - - -/** - \brief Get Active Interrupt (non-secure) - \details Reads the active register in non-secure NVIC when in secure state and returns the active bit for the device specific interrupt. - \param [in] IRQn Device specific interrupt number. - \return 0 Interrupt status is not active. - \return 1 Interrupt status is active. - \note IRQn must not be negative. - */ -__STATIC_INLINE uint32_t TZ_NVIC_GetActive_NS(IRQn_Type IRQn) -{ - if ((int32_t)(IRQn) >= 0) - { - return((uint32_t)(((NVIC_NS->IABR[(((uint32_t)IRQn) >> 5UL)] & (1UL << (((uint32_t)IRQn) & 0x1FUL))) != 0UL) ? 1UL : 0UL)); - } - else - { - return(0U); - } -} - - -/** - \brief Set Interrupt Priority (non-secure) - \details Sets the priority of a non-secure device specific interrupt or a non-secure processor exception when in secure state. - The interrupt number can be positive to specify a device specific interrupt, - or negative to specify a processor exception. - \param [in] IRQn Interrupt number. - \param [in] priority Priority to set. - \note The priority cannot be set for every non-secure processor exception. - */ -__STATIC_INLINE void TZ_NVIC_SetPriority_NS(IRQn_Type IRQn, uint32_t priority) -{ - if ((int32_t)(IRQn) >= 0) - { - NVIC_NS->IPR[((uint32_t)IRQn)] = (uint8_t)((priority << (8U - __NVIC_PRIO_BITS)) & (uint32_t)0xFFUL); - } - else - { - SCB_NS->SHPR[(((uint32_t)IRQn) & 0xFUL)-4UL] = (uint8_t)((priority << (8U - __NVIC_PRIO_BITS)) & (uint32_t)0xFFUL); - } -} - - -/** - \brief Get Interrupt Priority (non-secure) - \details Reads the priority of a non-secure device specific interrupt or a non-secure processor exception when in secure state. - The interrupt number can be positive to specify a device specific interrupt, - or negative to specify a processor exception. - \param [in] IRQn Interrupt number. - \return Interrupt Priority. Value is aligned automatically to the implemented priority bits of the microcontroller. - */ -__STATIC_INLINE uint32_t TZ_NVIC_GetPriority_NS(IRQn_Type IRQn) -{ - - if ((int32_t)(IRQn) >= 0) - { - return(((uint32_t)NVIC_NS->IPR[((uint32_t)IRQn)] >> (8U - __NVIC_PRIO_BITS))); - } - else - { - return(((uint32_t)SCB_NS->SHPR[(((uint32_t)IRQn) & 0xFUL)-4UL] >> (8U - __NVIC_PRIO_BITS))); - } -} -#endif /* defined (__ARM_FEATURE_CMSE) &&(__ARM_FEATURE_CMSE == 3U) */ - -/*@} end of CMSIS_Core_NVICFunctions */ - -/* ########################## MPU functions #################################### */ - -#if defined (__MPU_PRESENT) && (__MPU_PRESENT == 1U) - -#include "mpu_armv8.h" - -#endif - -/* ########################## FPU functions #################################### */ -/** - \ingroup CMSIS_Core_FunctionInterface - \defgroup CMSIS_Core_FpuFunctions FPU Functions - \brief Function that provides FPU type. - @{ - */ - -/** - \brief get FPU type - \details returns the FPU type - \returns - - \b 0: No FPU - - \b 1: Single precision FPU - - \b 2: Double + Single precision FPU - */ -__STATIC_INLINE uint32_t SCB_GetFPUType(void) -{ - uint32_t mvfr0; - - mvfr0 = FPU->MVFR0; - if ((mvfr0 & (FPU_MVFR0_Single_precision_Msk | FPU_MVFR0_Double_precision_Msk)) == 0x220U) - { - return 2U; /* Double + Single precision FPU */ - } - else if ((mvfr0 & (FPU_MVFR0_Single_precision_Msk | FPU_MVFR0_Double_precision_Msk)) == 0x020U) - { - return 1U; /* Single precision FPU */ - } - else - { - return 0U; /* No FPU */ - } -} - - -/*@} end of CMSIS_Core_FpuFunctions */ - - - -/* ########################## SAU functions #################################### */ -/** - \ingroup CMSIS_Core_FunctionInterface - \defgroup CMSIS_Core_SAUFunctions SAU Functions - \brief Functions that configure the SAU. - @{ - */ - -#if defined (__ARM_FEATURE_CMSE) && (__ARM_FEATURE_CMSE == 3U) - -/** - \brief Enable SAU - \details Enables the Security Attribution Unit (SAU). - */ -__STATIC_INLINE void TZ_SAU_Enable(void) -{ - SAU->CTRL |= (SAU_CTRL_ENABLE_Msk); -} - - - -/** - \brief Disable SAU - \details Disables the Security Attribution Unit (SAU). - */ -__STATIC_INLINE void TZ_SAU_Disable(void) -{ - SAU->CTRL &= ~(SAU_CTRL_ENABLE_Msk); -} - -#endif /* defined (__ARM_FEATURE_CMSE) && (__ARM_FEATURE_CMSE == 3U) */ - -/*@} end of CMSIS_Core_SAUFunctions */ - - - - -/* ################################## SysTick function ############################################ */ -/** - \ingroup CMSIS_Core_FunctionInterface - \defgroup CMSIS_Core_SysTickFunctions SysTick Functions - \brief Functions that configure the System. - @{ - */ - -#if defined (__Vendor_SysTickConfig) && (__Vendor_SysTickConfig == 0U) - -/** - \brief System Tick Configuration - \details Initializes the System Timer and its interrupt, and starts the System Tick Timer. - Counter is in free running mode to generate periodic interrupts. - \param [in] ticks Number of ticks between two interrupts. - \return 0 Function succeeded. - \return 1 Function failed. - \note When the variable __Vendor_SysTickConfig is set to 1, then the - function SysTick_Config is not included. In this case, the file device.h - must contain a vendor-specific implementation of this function. - */ -__STATIC_INLINE uint32_t SysTick_Config(uint32_t ticks) -{ - if ((ticks - 1UL) > SysTick_LOAD_RELOAD_Msk) - { - return (1UL); /* Reload value impossible */ - } - - SysTick->LOAD = (uint32_t)(ticks - 1UL); /* set reload register */ - NVIC_SetPriority (SysTick_IRQn, (1UL << __NVIC_PRIO_BITS) - 1UL); /* set Priority for Systick Interrupt */ - SysTick->VAL = 0UL; /* Load the SysTick Counter Value */ - SysTick->CTRL = SysTick_CTRL_CLKSOURCE_Msk | - SysTick_CTRL_TICKINT_Msk | - SysTick_CTRL_ENABLE_Msk; /* Enable SysTick IRQ and SysTick Timer */ - return (0UL); /* Function successful */ -} - -#if defined (__ARM_FEATURE_CMSE) && (__ARM_FEATURE_CMSE == 3U) -/** - \brief System Tick Configuration (non-secure) - \details Initializes the non-secure System Timer and its interrupt when in secure state, and starts the System Tick Timer. - Counter is in free running mode to generate periodic interrupts. - \param [in] ticks Number of ticks between two interrupts. - \return 0 Function succeeded. - \return 1 Function failed. - \note When the variable __Vendor_SysTickConfig is set to 1, then the - function TZ_SysTick_Config_NS is not included. In this case, the file device.h - must contain a vendor-specific implementation of this function. - - */ -__STATIC_INLINE uint32_t TZ_SysTick_Config_NS(uint32_t ticks) -{ - if ((ticks - 1UL) > SysTick_LOAD_RELOAD_Msk) - { - return (1UL); /* Reload value impossible */ - } - - SysTick_NS->LOAD = (uint32_t)(ticks - 1UL); /* set reload register */ - TZ_NVIC_SetPriority_NS (SysTick_IRQn, (1UL << __NVIC_PRIO_BITS) - 1UL); /* set Priority for Systick Interrupt */ - SysTick_NS->VAL = 0UL; /* Load the SysTick Counter Value */ - SysTick_NS->CTRL = SysTick_CTRL_CLKSOURCE_Msk | - SysTick_CTRL_TICKINT_Msk | - SysTick_CTRL_ENABLE_Msk; /* Enable SysTick IRQ and SysTick Timer */ - return (0UL); /* Function successful */ -} -#endif /* defined (__ARM_FEATURE_CMSE) && (__ARM_FEATURE_CMSE == 3U) */ - -#endif - -/*@} end of CMSIS_Core_SysTickFunctions */ - - - -/* ##################################### Debug In/Output function ########################################### */ -/** - \ingroup CMSIS_Core_FunctionInterface - \defgroup CMSIS_core_DebugFunctions ITM Functions - \brief Functions that access the ITM debug interface. - @{ - */ - -extern volatile int32_t ITM_RxBuffer; /*!< External variable to receive characters. */ -#define ITM_RXBUFFER_EMPTY ((int32_t)0x5AA55AA5U) /*!< Value identifying \ref ITM_RxBuffer is ready for next character. */ - - -/** - \brief ITM Send Character - \details Transmits a character via the ITM channel 0, and - \li Just returns when no debugger is connected that has booked the output. - \li Is blocking when a debugger is connected, but the previous character sent has not been transmitted. - \param [in] ch Character to transmit. - \returns Character to transmit. - */ -__STATIC_INLINE uint32_t ITM_SendChar (uint32_t ch) -{ - if (((ITM->TCR & ITM_TCR_ITMENA_Msk) != 0UL) && /* ITM enabled */ - ((ITM->TER & 1UL ) != 0UL) ) /* ITM Port #0 enabled */ - { - while (ITM->PORT[0U].u32 == 0UL) - { - __NOP(); - } - ITM->PORT[0U].u8 = (uint8_t)ch; - } - return (ch); -} - - -/** - \brief ITM Receive Character - \details Inputs a character via the external variable \ref ITM_RxBuffer. - \return Received character. - \return -1 No character pending. - */ -__STATIC_INLINE int32_t ITM_ReceiveChar (void) -{ - int32_t ch = -1; /* no character available */ - - if (ITM_RxBuffer != ITM_RXBUFFER_EMPTY) - { - ch = ITM_RxBuffer; - ITM_RxBuffer = ITM_RXBUFFER_EMPTY; /* ready for next character */ - } - - return (ch); -} - - -/** - \brief ITM Check Character - \details Checks whether a character is pending for reading in the variable \ref ITM_RxBuffer. - \return 0 No character available. - \return 1 Character available. - */ -__STATIC_INLINE int32_t ITM_CheckChar (void) -{ - - if (ITM_RxBuffer == ITM_RXBUFFER_EMPTY) - { - return (0); /* no character available */ - } - else - { - return (1); /* character available */ - } -} - -/*@} end of CMSIS_core_DebugFunctions */ - - - - -#ifdef __cplusplus -} -#endif - -#endif /* __CORE_ARMV8MML_H_DEPENDANT */ - -#endif /* __CMSIS_GENERIC */ diff --git a/test_dma/Drivers/CMSIS/Include/core_cm0.h b/test_dma/Drivers/CMSIS/Include/core_cm0.h deleted file mode 100644 index 6f82227..0000000 --- a/test_dma/Drivers/CMSIS/Include/core_cm0.h +++ /dev/null @@ -1,949 +0,0 @@ -/**************************************************************************//** - * @file core_cm0.h - * @brief CMSIS Cortex-M0 Core Peripheral Access Layer Header File - * @version V5.0.5 - * @date 28. May 2018 - ******************************************************************************/ -/* - * Copyright (c) 2009-2018 Arm Limited. All rights reserved. - * - * SPDX-License-Identifier: Apache-2.0 - * - * Licensed under the Apache License, Version 2.0 (the License); you may - * not use this file except in compliance with the License. - * You may obtain a copy of the License at - * - * www.apache.org/licenses/LICENSE-2.0 - * - * Unless required by applicable law or agreed to in writing, software - * distributed under the License is distributed on an AS IS BASIS, WITHOUT - * WARRANTIES OR CONDITIONS OF ANY KIND, either express or implied. - * See the License for the specific language governing permissions and - * limitations under the License. - */ - -#if defined ( __ICCARM__ ) - #pragma system_include /* treat file as system include file for MISRA check */ -#elif defined (__clang__) - #pragma clang system_header /* treat file as system include file */ -#endif - -#ifndef __CORE_CM0_H_GENERIC -#define __CORE_CM0_H_GENERIC - -#include - -#ifdef __cplusplus - extern "C" { -#endif - -/** - \page CMSIS_MISRA_Exceptions MISRA-C:2004 Compliance Exceptions - CMSIS violates the following MISRA-C:2004 rules: - - \li Required Rule 8.5, object/function definition in header file.
- Function definitions in header files are used to allow 'inlining'. - - \li Required Rule 18.4, declaration of union type or object of union type: '{...}'.
- Unions are used for effective representation of core registers. - - \li Advisory Rule 19.7, Function-like macro defined.
- Function-like macros are used to allow more efficient code. - */ - - -/******************************************************************************* - * CMSIS definitions - ******************************************************************************/ -/** - \ingroup Cortex_M0 - @{ - */ - -#include "cmsis_version.h" - -/* CMSIS CM0 definitions */ -#define __CM0_CMSIS_VERSION_MAIN (__CM_CMSIS_VERSION_MAIN) /*!< \deprecated [31:16] CMSIS HAL main version */ -#define __CM0_CMSIS_VERSION_SUB (__CM_CMSIS_VERSION_SUB) /*!< \deprecated [15:0] CMSIS HAL sub version */ -#define __CM0_CMSIS_VERSION ((__CM0_CMSIS_VERSION_MAIN << 16U) | \ - __CM0_CMSIS_VERSION_SUB ) /*!< \deprecated CMSIS HAL version number */ - -#define __CORTEX_M (0U) /*!< Cortex-M Core */ - -/** __FPU_USED indicates whether an FPU is used or not. - This core does not support an FPU at all -*/ -#define __FPU_USED 0U - -#if defined ( __CC_ARM ) - #if defined __TARGET_FPU_VFP - #error "Compiler generates FPU instructions for a device without an FPU (check __FPU_PRESENT)" - #endif - -#elif defined (__ARMCC_VERSION) && (__ARMCC_VERSION >= 6010050) - #if defined __ARM_PCS_VFP - #error "Compiler generates FPU instructions for a device without an FPU (check __FPU_PRESENT)" - #endif - -#elif defined ( __GNUC__ ) - #if defined (__VFP_FP__) && !defined(__SOFTFP__) - #error "Compiler generates FPU instructions for a device without an FPU (check __FPU_PRESENT)" - #endif - -#elif defined ( __ICCARM__ ) - #if defined __ARMVFP__ - #error "Compiler generates FPU instructions for a device without an FPU (check __FPU_PRESENT)" - #endif - -#elif defined ( __TI_ARM__ ) - #if defined __TI_VFP_SUPPORT__ - #error "Compiler generates FPU instructions for a device without an FPU (check __FPU_PRESENT)" - #endif - -#elif defined ( __TASKING__ ) - #if defined __FPU_VFP__ - #error "Compiler generates FPU instructions for a device without an FPU (check __FPU_PRESENT)" - #endif - -#elif defined ( __CSMC__ ) - #if ( __CSMC__ & 0x400U) - #error "Compiler generates FPU instructions for a device without an FPU (check __FPU_PRESENT)" - #endif - -#endif - -#include "cmsis_compiler.h" /* CMSIS compiler specific defines */ - - -#ifdef __cplusplus -} -#endif - -#endif /* __CORE_CM0_H_GENERIC */ - -#ifndef __CMSIS_GENERIC - -#ifndef __CORE_CM0_H_DEPENDANT -#define __CORE_CM0_H_DEPENDANT - -#ifdef __cplusplus - extern "C" { -#endif - -/* check device defines and use defaults */ -#if defined __CHECK_DEVICE_DEFINES - #ifndef __CM0_REV - #define __CM0_REV 0x0000U - #warning "__CM0_REV not defined in device header file; using default!" - #endif - - #ifndef __NVIC_PRIO_BITS - #define __NVIC_PRIO_BITS 2U - #warning "__NVIC_PRIO_BITS not defined in device header file; using default!" - #endif - - #ifndef __Vendor_SysTickConfig - #define __Vendor_SysTickConfig 0U - #warning "__Vendor_SysTickConfig not defined in device header file; using default!" - #endif -#endif - -/* IO definitions (access restrictions to peripheral registers) */ -/** - \defgroup CMSIS_glob_defs CMSIS Global Defines - - IO Type Qualifiers are used - \li to specify the access to peripheral variables. - \li for automatic generation of peripheral register debug information. -*/ -#ifdef __cplusplus - #define __I volatile /*!< Defines 'read only' permissions */ -#else - #define __I volatile const /*!< Defines 'read only' permissions */ -#endif -#define __O volatile /*!< Defines 'write only' permissions */ -#define __IO volatile /*!< Defines 'read / write' permissions */ - -/* following defines should be used for structure members */ -#define __IM volatile const /*! Defines 'read only' structure member permissions */ -#define __OM volatile /*! Defines 'write only' structure member permissions */ -#define __IOM volatile /*! Defines 'read / write' structure member permissions */ - -/*@} end of group Cortex_M0 */ - - - -/******************************************************************************* - * Register Abstraction - Core Register contain: - - Core Register - - Core NVIC Register - - Core SCB Register - - Core SysTick Register - ******************************************************************************/ -/** - \defgroup CMSIS_core_register Defines and Type Definitions - \brief Type definitions and defines for Cortex-M processor based devices. -*/ - -/** - \ingroup CMSIS_core_register - \defgroup CMSIS_CORE Status and Control Registers - \brief Core Register type definitions. - @{ - */ - -/** - \brief Union type to access the Application Program Status Register (APSR). - */ -typedef union -{ - struct - { - uint32_t _reserved0:28; /*!< bit: 0..27 Reserved */ - uint32_t V:1; /*!< bit: 28 Overflow condition code flag */ - uint32_t C:1; /*!< bit: 29 Carry condition code flag */ - uint32_t Z:1; /*!< bit: 30 Zero condition code flag */ - uint32_t N:1; /*!< bit: 31 Negative condition code flag */ - } b; /*!< Structure used for bit access */ - uint32_t w; /*!< Type used for word access */ -} APSR_Type; - -/* APSR Register Definitions */ -#define APSR_N_Pos 31U /*!< APSR: N Position */ -#define APSR_N_Msk (1UL << APSR_N_Pos) /*!< APSR: N Mask */ - -#define APSR_Z_Pos 30U /*!< APSR: Z Position */ -#define APSR_Z_Msk (1UL << APSR_Z_Pos) /*!< APSR: Z Mask */ - -#define APSR_C_Pos 29U /*!< APSR: C Position */ -#define APSR_C_Msk (1UL << APSR_C_Pos) /*!< APSR: C Mask */ - -#define APSR_V_Pos 28U /*!< APSR: V Position */ -#define APSR_V_Msk (1UL << APSR_V_Pos) /*!< APSR: V Mask */ - - -/** - \brief Union type to access the Interrupt Program Status Register (IPSR). - */ -typedef union -{ - struct - { - uint32_t ISR:9; /*!< bit: 0.. 8 Exception number */ - uint32_t _reserved0:23; /*!< bit: 9..31 Reserved */ - } b; /*!< Structure used for bit access */ - uint32_t w; /*!< Type used for word access */ -} IPSR_Type; - -/* IPSR Register Definitions */ -#define IPSR_ISR_Pos 0U /*!< IPSR: ISR Position */ -#define IPSR_ISR_Msk (0x1FFUL /*<< IPSR_ISR_Pos*/) /*!< IPSR: ISR Mask */ - - -/** - \brief Union type to access the Special-Purpose Program Status Registers (xPSR). - */ -typedef union -{ - struct - { - uint32_t ISR:9; /*!< bit: 0.. 8 Exception number */ - uint32_t _reserved0:15; /*!< bit: 9..23 Reserved */ - uint32_t T:1; /*!< bit: 24 Thumb bit (read 0) */ - uint32_t _reserved1:3; /*!< bit: 25..27 Reserved */ - uint32_t V:1; /*!< bit: 28 Overflow condition code flag */ - uint32_t C:1; /*!< bit: 29 Carry condition code flag */ - uint32_t Z:1; /*!< bit: 30 Zero condition code flag */ - uint32_t N:1; /*!< bit: 31 Negative condition code flag */ - } b; /*!< Structure used for bit access */ - uint32_t w; /*!< Type used for word access */ -} xPSR_Type; - -/* xPSR Register Definitions */ -#define xPSR_N_Pos 31U /*!< xPSR: N Position */ -#define xPSR_N_Msk (1UL << xPSR_N_Pos) /*!< xPSR: N Mask */ - -#define xPSR_Z_Pos 30U /*!< xPSR: Z Position */ -#define xPSR_Z_Msk (1UL << xPSR_Z_Pos) /*!< xPSR: Z Mask */ - -#define xPSR_C_Pos 29U /*!< xPSR: C Position */ -#define xPSR_C_Msk (1UL << xPSR_C_Pos) /*!< xPSR: C Mask */ - -#define xPSR_V_Pos 28U /*!< xPSR: V Position */ -#define xPSR_V_Msk (1UL << xPSR_V_Pos) /*!< xPSR: V Mask */ - -#define xPSR_T_Pos 24U /*!< xPSR: T Position */ -#define xPSR_T_Msk (1UL << xPSR_T_Pos) /*!< xPSR: T Mask */ - -#define xPSR_ISR_Pos 0U /*!< xPSR: ISR Position */ -#define xPSR_ISR_Msk (0x1FFUL /*<< xPSR_ISR_Pos*/) /*!< xPSR: ISR Mask */ - - -/** - \brief Union type to access the Control Registers (CONTROL). - */ -typedef union -{ - struct - { - uint32_t _reserved0:1; /*!< bit: 0 Reserved */ - uint32_t SPSEL:1; /*!< bit: 1 Stack to be used */ - uint32_t _reserved1:30; /*!< bit: 2..31 Reserved */ - } b; /*!< Structure used for bit access */ - uint32_t w; /*!< Type used for word access */ -} CONTROL_Type; - -/* CONTROL Register Definitions */ -#define CONTROL_SPSEL_Pos 1U /*!< CONTROL: SPSEL Position */ -#define CONTROL_SPSEL_Msk (1UL << CONTROL_SPSEL_Pos) /*!< CONTROL: SPSEL Mask */ - -/*@} end of group CMSIS_CORE */ - - -/** - \ingroup CMSIS_core_register - \defgroup CMSIS_NVIC Nested Vectored Interrupt Controller (NVIC) - \brief Type definitions for the NVIC Registers - @{ - */ - -/** - \brief Structure type to access the Nested Vectored Interrupt Controller (NVIC). - */ -typedef struct -{ - __IOM uint32_t ISER[1U]; /*!< Offset: 0x000 (R/W) Interrupt Set Enable Register */ - uint32_t RESERVED0[31U]; - __IOM uint32_t ICER[1U]; /*!< Offset: 0x080 (R/W) Interrupt Clear Enable Register */ - uint32_t RSERVED1[31U]; - __IOM uint32_t ISPR[1U]; /*!< Offset: 0x100 (R/W) Interrupt Set Pending Register */ - uint32_t RESERVED2[31U]; - __IOM uint32_t ICPR[1U]; /*!< Offset: 0x180 (R/W) Interrupt Clear Pending Register */ - uint32_t RESERVED3[31U]; - uint32_t RESERVED4[64U]; - __IOM uint32_t IP[8U]; /*!< Offset: 0x300 (R/W) Interrupt Priority Register */ -} NVIC_Type; - -/*@} end of group CMSIS_NVIC */ - - -/** - \ingroup CMSIS_core_register - \defgroup CMSIS_SCB System Control Block (SCB) - \brief Type definitions for the System Control Block Registers - @{ - */ - -/** - \brief Structure type to access the System Control Block (SCB). - */ -typedef struct -{ - __IM uint32_t CPUID; /*!< Offset: 0x000 (R/ ) CPUID Base Register */ - __IOM uint32_t ICSR; /*!< Offset: 0x004 (R/W) Interrupt Control and State Register */ - uint32_t RESERVED0; - __IOM uint32_t AIRCR; /*!< Offset: 0x00C (R/W) Application Interrupt and Reset Control Register */ - __IOM uint32_t SCR; /*!< Offset: 0x010 (R/W) System Control Register */ - __IOM uint32_t CCR; /*!< Offset: 0x014 (R/W) Configuration Control Register */ - uint32_t RESERVED1; - __IOM uint32_t SHP[2U]; /*!< Offset: 0x01C (R/W) System Handlers Priority Registers. [0] is RESERVED */ - __IOM uint32_t SHCSR; /*!< Offset: 0x024 (R/W) System Handler Control and State Register */ -} SCB_Type; - -/* SCB CPUID Register Definitions */ -#define SCB_CPUID_IMPLEMENTER_Pos 24U /*!< SCB CPUID: IMPLEMENTER Position */ -#define SCB_CPUID_IMPLEMENTER_Msk (0xFFUL << SCB_CPUID_IMPLEMENTER_Pos) /*!< SCB CPUID: IMPLEMENTER Mask */ - -#define SCB_CPUID_VARIANT_Pos 20U /*!< SCB CPUID: VARIANT Position */ -#define SCB_CPUID_VARIANT_Msk (0xFUL << SCB_CPUID_VARIANT_Pos) /*!< SCB CPUID: VARIANT Mask */ - -#define SCB_CPUID_ARCHITECTURE_Pos 16U /*!< SCB CPUID: ARCHITECTURE Position */ -#define SCB_CPUID_ARCHITECTURE_Msk (0xFUL << SCB_CPUID_ARCHITECTURE_Pos) /*!< SCB CPUID: ARCHITECTURE Mask */ - -#define SCB_CPUID_PARTNO_Pos 4U /*!< SCB CPUID: PARTNO Position */ -#define SCB_CPUID_PARTNO_Msk (0xFFFUL << SCB_CPUID_PARTNO_Pos) /*!< SCB CPUID: PARTNO Mask */ - -#define SCB_CPUID_REVISION_Pos 0U /*!< SCB CPUID: REVISION Position */ -#define SCB_CPUID_REVISION_Msk (0xFUL /*<< SCB_CPUID_REVISION_Pos*/) /*!< SCB CPUID: REVISION Mask */ - -/* SCB Interrupt Control State Register Definitions */ -#define SCB_ICSR_NMIPENDSET_Pos 31U /*!< SCB ICSR: NMIPENDSET Position */ -#define SCB_ICSR_NMIPENDSET_Msk (1UL << SCB_ICSR_NMIPENDSET_Pos) /*!< SCB ICSR: NMIPENDSET Mask */ - -#define SCB_ICSR_PENDSVSET_Pos 28U /*!< SCB ICSR: PENDSVSET Position */ -#define SCB_ICSR_PENDSVSET_Msk (1UL << SCB_ICSR_PENDSVSET_Pos) /*!< SCB ICSR: PENDSVSET Mask */ - -#define SCB_ICSR_PENDSVCLR_Pos 27U /*!< SCB ICSR: PENDSVCLR Position */ -#define SCB_ICSR_PENDSVCLR_Msk (1UL << SCB_ICSR_PENDSVCLR_Pos) /*!< SCB ICSR: PENDSVCLR Mask */ - -#define SCB_ICSR_PENDSTSET_Pos 26U /*!< SCB ICSR: PENDSTSET Position */ -#define SCB_ICSR_PENDSTSET_Msk (1UL << SCB_ICSR_PENDSTSET_Pos) /*!< SCB ICSR: PENDSTSET Mask */ - -#define SCB_ICSR_PENDSTCLR_Pos 25U /*!< SCB ICSR: PENDSTCLR Position */ -#define SCB_ICSR_PENDSTCLR_Msk (1UL << SCB_ICSR_PENDSTCLR_Pos) /*!< SCB ICSR: PENDSTCLR Mask */ - -#define SCB_ICSR_ISRPREEMPT_Pos 23U /*!< SCB ICSR: ISRPREEMPT Position */ -#define SCB_ICSR_ISRPREEMPT_Msk (1UL << SCB_ICSR_ISRPREEMPT_Pos) /*!< SCB ICSR: ISRPREEMPT Mask */ - -#define SCB_ICSR_ISRPENDING_Pos 22U /*!< SCB ICSR: ISRPENDING Position */ -#define SCB_ICSR_ISRPENDING_Msk (1UL << SCB_ICSR_ISRPENDING_Pos) /*!< SCB ICSR: ISRPENDING Mask */ - -#define SCB_ICSR_VECTPENDING_Pos 12U /*!< SCB ICSR: VECTPENDING Position */ -#define SCB_ICSR_VECTPENDING_Msk (0x1FFUL << SCB_ICSR_VECTPENDING_Pos) /*!< SCB ICSR: VECTPENDING Mask */ - -#define SCB_ICSR_VECTACTIVE_Pos 0U /*!< SCB ICSR: VECTACTIVE Position */ -#define SCB_ICSR_VECTACTIVE_Msk (0x1FFUL /*<< SCB_ICSR_VECTACTIVE_Pos*/) /*!< SCB ICSR: VECTACTIVE Mask */ - -/* SCB Application Interrupt and Reset Control Register Definitions */ -#define SCB_AIRCR_VECTKEY_Pos 16U /*!< SCB AIRCR: VECTKEY Position */ -#define SCB_AIRCR_VECTKEY_Msk (0xFFFFUL << SCB_AIRCR_VECTKEY_Pos) /*!< SCB AIRCR: VECTKEY Mask */ - -#define SCB_AIRCR_VECTKEYSTAT_Pos 16U /*!< SCB AIRCR: VECTKEYSTAT Position */ -#define SCB_AIRCR_VECTKEYSTAT_Msk (0xFFFFUL << SCB_AIRCR_VECTKEYSTAT_Pos) /*!< SCB AIRCR: VECTKEYSTAT Mask */ - -#define SCB_AIRCR_ENDIANESS_Pos 15U /*!< SCB AIRCR: ENDIANESS Position */ -#define SCB_AIRCR_ENDIANESS_Msk (1UL << SCB_AIRCR_ENDIANESS_Pos) /*!< SCB AIRCR: ENDIANESS Mask */ - -#define SCB_AIRCR_SYSRESETREQ_Pos 2U /*!< SCB AIRCR: SYSRESETREQ Position */ -#define SCB_AIRCR_SYSRESETREQ_Msk (1UL << SCB_AIRCR_SYSRESETREQ_Pos) /*!< SCB AIRCR: SYSRESETREQ Mask */ - -#define SCB_AIRCR_VECTCLRACTIVE_Pos 1U /*!< SCB AIRCR: VECTCLRACTIVE Position */ -#define SCB_AIRCR_VECTCLRACTIVE_Msk (1UL << SCB_AIRCR_VECTCLRACTIVE_Pos) /*!< SCB AIRCR: VECTCLRACTIVE Mask */ - -/* SCB System Control Register Definitions */ -#define SCB_SCR_SEVONPEND_Pos 4U /*!< SCB SCR: SEVONPEND Position */ -#define SCB_SCR_SEVONPEND_Msk (1UL << SCB_SCR_SEVONPEND_Pos) /*!< SCB SCR: SEVONPEND Mask */ - -#define SCB_SCR_SLEEPDEEP_Pos 2U /*!< SCB SCR: SLEEPDEEP Position */ -#define SCB_SCR_SLEEPDEEP_Msk (1UL << SCB_SCR_SLEEPDEEP_Pos) /*!< SCB SCR: SLEEPDEEP Mask */ - -#define SCB_SCR_SLEEPONEXIT_Pos 1U /*!< SCB SCR: SLEEPONEXIT Position */ -#define SCB_SCR_SLEEPONEXIT_Msk (1UL << SCB_SCR_SLEEPONEXIT_Pos) /*!< SCB SCR: SLEEPONEXIT Mask */ - -/* SCB Configuration Control Register Definitions */ -#define SCB_CCR_STKALIGN_Pos 9U /*!< SCB CCR: STKALIGN Position */ -#define SCB_CCR_STKALIGN_Msk (1UL << SCB_CCR_STKALIGN_Pos) /*!< SCB CCR: STKALIGN Mask */ - -#define SCB_CCR_UNALIGN_TRP_Pos 3U /*!< SCB CCR: UNALIGN_TRP Position */ -#define SCB_CCR_UNALIGN_TRP_Msk (1UL << SCB_CCR_UNALIGN_TRP_Pos) /*!< SCB CCR: UNALIGN_TRP Mask */ - -/* SCB System Handler Control and State Register Definitions */ -#define SCB_SHCSR_SVCALLPENDED_Pos 15U /*!< SCB SHCSR: SVCALLPENDED Position */ -#define SCB_SHCSR_SVCALLPENDED_Msk (1UL << SCB_SHCSR_SVCALLPENDED_Pos) /*!< SCB SHCSR: SVCALLPENDED Mask */ - -/*@} end of group CMSIS_SCB */ - - -/** - \ingroup CMSIS_core_register - \defgroup CMSIS_SysTick System Tick Timer (SysTick) - \brief Type definitions for the System Timer Registers. - @{ - */ - -/** - \brief Structure type to access the System Timer (SysTick). - */ -typedef struct -{ - __IOM uint32_t CTRL; /*!< Offset: 0x000 (R/W) SysTick Control and Status Register */ - __IOM uint32_t LOAD; /*!< Offset: 0x004 (R/W) SysTick Reload Value Register */ - __IOM uint32_t VAL; /*!< Offset: 0x008 (R/W) SysTick Current Value Register */ - __IM uint32_t CALIB; /*!< Offset: 0x00C (R/ ) SysTick Calibration Register */ -} SysTick_Type; - -/* SysTick Control / Status Register Definitions */ -#define SysTick_CTRL_COUNTFLAG_Pos 16U /*!< SysTick CTRL: COUNTFLAG Position */ -#define SysTick_CTRL_COUNTFLAG_Msk (1UL << SysTick_CTRL_COUNTFLAG_Pos) /*!< SysTick CTRL: COUNTFLAG Mask */ - -#define SysTick_CTRL_CLKSOURCE_Pos 2U /*!< SysTick CTRL: CLKSOURCE Position */ -#define SysTick_CTRL_CLKSOURCE_Msk (1UL << SysTick_CTRL_CLKSOURCE_Pos) /*!< SysTick CTRL: CLKSOURCE Mask */ - -#define SysTick_CTRL_TICKINT_Pos 1U /*!< SysTick CTRL: TICKINT Position */ -#define SysTick_CTRL_TICKINT_Msk (1UL << SysTick_CTRL_TICKINT_Pos) /*!< SysTick CTRL: TICKINT Mask */ - -#define SysTick_CTRL_ENABLE_Pos 0U /*!< SysTick CTRL: ENABLE Position */ -#define SysTick_CTRL_ENABLE_Msk (1UL /*<< SysTick_CTRL_ENABLE_Pos*/) /*!< SysTick CTRL: ENABLE Mask */ - -/* SysTick Reload Register Definitions */ -#define SysTick_LOAD_RELOAD_Pos 0U /*!< SysTick LOAD: RELOAD Position */ -#define SysTick_LOAD_RELOAD_Msk (0xFFFFFFUL /*<< SysTick_LOAD_RELOAD_Pos*/) /*!< SysTick LOAD: RELOAD Mask */ - -/* SysTick Current Register Definitions */ -#define SysTick_VAL_CURRENT_Pos 0U /*!< SysTick VAL: CURRENT Position */ -#define SysTick_VAL_CURRENT_Msk (0xFFFFFFUL /*<< SysTick_VAL_CURRENT_Pos*/) /*!< SysTick VAL: CURRENT Mask */ - -/* SysTick Calibration Register Definitions */ -#define SysTick_CALIB_NOREF_Pos 31U /*!< SysTick CALIB: NOREF Position */ -#define SysTick_CALIB_NOREF_Msk (1UL << SysTick_CALIB_NOREF_Pos) /*!< SysTick CALIB: NOREF Mask */ - -#define SysTick_CALIB_SKEW_Pos 30U /*!< SysTick CALIB: SKEW Position */ -#define SysTick_CALIB_SKEW_Msk (1UL << SysTick_CALIB_SKEW_Pos) /*!< SysTick CALIB: SKEW Mask */ - -#define SysTick_CALIB_TENMS_Pos 0U /*!< SysTick CALIB: TENMS Position */ -#define SysTick_CALIB_TENMS_Msk (0xFFFFFFUL /*<< SysTick_CALIB_TENMS_Pos*/) /*!< SysTick CALIB: TENMS Mask */ - -/*@} end of group CMSIS_SysTick */ - - -/** - \ingroup CMSIS_core_register - \defgroup CMSIS_CoreDebug Core Debug Registers (CoreDebug) - \brief Cortex-M0 Core Debug Registers (DCB registers, SHCSR, and DFSR) are only accessible over DAP and not via processor. - Therefore they are not covered by the Cortex-M0 header file. - @{ - */ -/*@} end of group CMSIS_CoreDebug */ - - -/** - \ingroup CMSIS_core_register - \defgroup CMSIS_core_bitfield Core register bit field macros - \brief Macros for use with bit field definitions (xxx_Pos, xxx_Msk). - @{ - */ - -/** - \brief Mask and shift a bit field value for use in a register bit range. - \param[in] field Name of the register bit field. - \param[in] value Value of the bit field. This parameter is interpreted as an uint32_t type. - \return Masked and shifted value. -*/ -#define _VAL2FLD(field, value) (((uint32_t)(value) << field ## _Pos) & field ## _Msk) - -/** - \brief Mask and shift a register value to extract a bit filed value. - \param[in] field Name of the register bit field. - \param[in] value Value of register. This parameter is interpreted as an uint32_t type. - \return Masked and shifted bit field value. -*/ -#define _FLD2VAL(field, value) (((uint32_t)(value) & field ## _Msk) >> field ## _Pos) - -/*@} end of group CMSIS_core_bitfield */ - - -/** - \ingroup CMSIS_core_register - \defgroup CMSIS_core_base Core Definitions - \brief Definitions for base addresses, unions, and structures. - @{ - */ - -/* Memory mapping of Core Hardware */ -#define SCS_BASE (0xE000E000UL) /*!< System Control Space Base Address */ -#define SysTick_BASE (SCS_BASE + 0x0010UL) /*!< SysTick Base Address */ -#define NVIC_BASE (SCS_BASE + 0x0100UL) /*!< NVIC Base Address */ -#define SCB_BASE (SCS_BASE + 0x0D00UL) /*!< System Control Block Base Address */ - -#define SCB ((SCB_Type *) SCB_BASE ) /*!< SCB configuration struct */ -#define SysTick ((SysTick_Type *) SysTick_BASE ) /*!< SysTick configuration struct */ -#define NVIC ((NVIC_Type *) NVIC_BASE ) /*!< NVIC configuration struct */ - - -/*@} */ - - - -/******************************************************************************* - * Hardware Abstraction Layer - Core Function Interface contains: - - Core NVIC Functions - - Core SysTick Functions - - Core Register Access Functions - ******************************************************************************/ -/** - \defgroup CMSIS_Core_FunctionInterface Functions and Instructions Reference -*/ - - - -/* ########################## NVIC functions #################################### */ -/** - \ingroup CMSIS_Core_FunctionInterface - \defgroup CMSIS_Core_NVICFunctions NVIC Functions - \brief Functions that manage interrupts and exceptions via the NVIC. - @{ - */ - -#ifdef CMSIS_NVIC_VIRTUAL - #ifndef CMSIS_NVIC_VIRTUAL_HEADER_FILE - #define CMSIS_NVIC_VIRTUAL_HEADER_FILE "cmsis_nvic_virtual.h" - #endif - #include CMSIS_NVIC_VIRTUAL_HEADER_FILE -#else - #define NVIC_SetPriorityGrouping __NVIC_SetPriorityGrouping - #define NVIC_GetPriorityGrouping __NVIC_GetPriorityGrouping - #define NVIC_EnableIRQ __NVIC_EnableIRQ - #define NVIC_GetEnableIRQ __NVIC_GetEnableIRQ - #define NVIC_DisableIRQ __NVIC_DisableIRQ - #define NVIC_GetPendingIRQ __NVIC_GetPendingIRQ - #define NVIC_SetPendingIRQ __NVIC_SetPendingIRQ - #define NVIC_ClearPendingIRQ __NVIC_ClearPendingIRQ -/*#define NVIC_GetActive __NVIC_GetActive not available for Cortex-M0 */ - #define NVIC_SetPriority __NVIC_SetPriority - #define NVIC_GetPriority __NVIC_GetPriority - #define NVIC_SystemReset __NVIC_SystemReset -#endif /* CMSIS_NVIC_VIRTUAL */ - -#ifdef CMSIS_VECTAB_VIRTUAL - #ifndef CMSIS_VECTAB_VIRTUAL_HEADER_FILE - #define CMSIS_VECTAB_VIRTUAL_HEADER_FILE "cmsis_vectab_virtual.h" - #endif - #include CMSIS_VECTAB_VIRTUAL_HEADER_FILE -#else - #define NVIC_SetVector __NVIC_SetVector - #define NVIC_GetVector __NVIC_GetVector -#endif /* (CMSIS_VECTAB_VIRTUAL) */ - -#define NVIC_USER_IRQ_OFFSET 16 - - -/* The following EXC_RETURN values are saved the LR on exception entry */ -#define EXC_RETURN_HANDLER (0xFFFFFFF1UL) /* return to Handler mode, uses MSP after return */ -#define EXC_RETURN_THREAD_MSP (0xFFFFFFF9UL) /* return to Thread mode, uses MSP after return */ -#define EXC_RETURN_THREAD_PSP (0xFFFFFFFDUL) /* return to Thread mode, uses PSP after return */ - - -/* Interrupt Priorities are WORD accessible only under Armv6-M */ -/* The following MACROS handle generation of the register offset and byte masks */ -#define _BIT_SHIFT(IRQn) ( ((((uint32_t)(int32_t)(IRQn)) ) & 0x03UL) * 8UL) -#define _SHP_IDX(IRQn) ( (((((uint32_t)(int32_t)(IRQn)) & 0x0FUL)-8UL) >> 2UL) ) -#define _IP_IDX(IRQn) ( (((uint32_t)(int32_t)(IRQn)) >> 2UL) ) - -#define __NVIC_SetPriorityGrouping(X) (void)(X) -#define __NVIC_GetPriorityGrouping() (0U) - -/** - \brief Enable Interrupt - \details Enables a device specific interrupt in the NVIC interrupt controller. - \param [in] IRQn Device specific interrupt number. - \note IRQn must not be negative. - */ -__STATIC_INLINE void __NVIC_EnableIRQ(IRQn_Type IRQn) -{ - if ((int32_t)(IRQn) >= 0) - { - NVIC->ISER[0U] = (uint32_t)(1UL << (((uint32_t)IRQn) & 0x1FUL)); - } -} - - -/** - \brief Get Interrupt Enable status - \details Returns a device specific interrupt enable status from the NVIC interrupt controller. - \param [in] IRQn Device specific interrupt number. - \return 0 Interrupt is not enabled. - \return 1 Interrupt is enabled. - \note IRQn must not be negative. - */ -__STATIC_INLINE uint32_t __NVIC_GetEnableIRQ(IRQn_Type IRQn) -{ - if ((int32_t)(IRQn) >= 0) - { - return((uint32_t)(((NVIC->ISER[0U] & (1UL << (((uint32_t)IRQn) & 0x1FUL))) != 0UL) ? 1UL : 0UL)); - } - else - { - return(0U); - } -} - - -/** - \brief Disable Interrupt - \details Disables a device specific interrupt in the NVIC interrupt controller. - \param [in] IRQn Device specific interrupt number. - \note IRQn must not be negative. - */ -__STATIC_INLINE void __NVIC_DisableIRQ(IRQn_Type IRQn) -{ - if ((int32_t)(IRQn) >= 0) - { - NVIC->ICER[0U] = (uint32_t)(1UL << (((uint32_t)IRQn) & 0x1FUL)); - __DSB(); - __ISB(); - } -} - - -/** - \brief Get Pending Interrupt - \details Reads the NVIC pending register and returns the pending bit for the specified device specific interrupt. - \param [in] IRQn Device specific interrupt number. - \return 0 Interrupt status is not pending. - \return 1 Interrupt status is pending. - \note IRQn must not be negative. - */ -__STATIC_INLINE uint32_t __NVIC_GetPendingIRQ(IRQn_Type IRQn) -{ - if ((int32_t)(IRQn) >= 0) - { - return((uint32_t)(((NVIC->ISPR[0U] & (1UL << (((uint32_t)IRQn) & 0x1FUL))) != 0UL) ? 1UL : 0UL)); - } - else - { - return(0U); - } -} - - -/** - \brief Set Pending Interrupt - \details Sets the pending bit of a device specific interrupt in the NVIC pending register. - \param [in] IRQn Device specific interrupt number. - \note IRQn must not be negative. - */ -__STATIC_INLINE void __NVIC_SetPendingIRQ(IRQn_Type IRQn) -{ - if ((int32_t)(IRQn) >= 0) - { - NVIC->ISPR[0U] = (uint32_t)(1UL << (((uint32_t)IRQn) & 0x1FUL)); - } -} - - -/** - \brief Clear Pending Interrupt - \details Clears the pending bit of a device specific interrupt in the NVIC pending register. - \param [in] IRQn Device specific interrupt number. - \note IRQn must not be negative. - */ -__STATIC_INLINE void __NVIC_ClearPendingIRQ(IRQn_Type IRQn) -{ - if ((int32_t)(IRQn) >= 0) - { - NVIC->ICPR[0U] = (uint32_t)(1UL << (((uint32_t)IRQn) & 0x1FUL)); - } -} - - -/** - \brief Set Interrupt Priority - \details Sets the priority of a device specific interrupt or a processor exception. - The interrupt number can be positive to specify a device specific interrupt, - or negative to specify a processor exception. - \param [in] IRQn Interrupt number. - \param [in] priority Priority to set. - \note The priority cannot be set for every processor exception. - */ -__STATIC_INLINE void __NVIC_SetPriority(IRQn_Type IRQn, uint32_t priority) -{ - if ((int32_t)(IRQn) >= 0) - { - NVIC->IP[_IP_IDX(IRQn)] = ((uint32_t)(NVIC->IP[_IP_IDX(IRQn)] & ~(0xFFUL << _BIT_SHIFT(IRQn))) | - (((priority << (8U - __NVIC_PRIO_BITS)) & (uint32_t)0xFFUL) << _BIT_SHIFT(IRQn))); - } - else - { - SCB->SHP[_SHP_IDX(IRQn)] = ((uint32_t)(SCB->SHP[_SHP_IDX(IRQn)] & ~(0xFFUL << _BIT_SHIFT(IRQn))) | - (((priority << (8U - __NVIC_PRIO_BITS)) & (uint32_t)0xFFUL) << _BIT_SHIFT(IRQn))); - } -} - - -/** - \brief Get Interrupt Priority - \details Reads the priority of a device specific interrupt or a processor exception. - The interrupt number can be positive to specify a device specific interrupt, - or negative to specify a processor exception. - \param [in] IRQn Interrupt number. - \return Interrupt Priority. - Value is aligned automatically to the implemented priority bits of the microcontroller. - */ -__STATIC_INLINE uint32_t __NVIC_GetPriority(IRQn_Type IRQn) -{ - - if ((int32_t)(IRQn) >= 0) - { - return((uint32_t)(((NVIC->IP[ _IP_IDX(IRQn)] >> _BIT_SHIFT(IRQn) ) & (uint32_t)0xFFUL) >> (8U - __NVIC_PRIO_BITS))); - } - else - { - return((uint32_t)(((SCB->SHP[_SHP_IDX(IRQn)] >> _BIT_SHIFT(IRQn) ) & (uint32_t)0xFFUL) >> (8U - __NVIC_PRIO_BITS))); - } -} - - -/** - \brief Encode Priority - \details Encodes the priority for an interrupt with the given priority group, - preemptive priority value, and subpriority value. - In case of a conflict between priority grouping and available - priority bits (__NVIC_PRIO_BITS), the smallest possible priority group is set. - \param [in] PriorityGroup Used priority group. - \param [in] PreemptPriority Preemptive priority value (starting from 0). - \param [in] SubPriority Subpriority value (starting from 0). - \return Encoded priority. Value can be used in the function \ref NVIC_SetPriority(). - */ -__STATIC_INLINE uint32_t NVIC_EncodePriority (uint32_t PriorityGroup, uint32_t PreemptPriority, uint32_t SubPriority) -{ - uint32_t PriorityGroupTmp = (PriorityGroup & (uint32_t)0x07UL); /* only values 0..7 are used */ - uint32_t PreemptPriorityBits; - uint32_t SubPriorityBits; - - PreemptPriorityBits = ((7UL - PriorityGroupTmp) > (uint32_t)(__NVIC_PRIO_BITS)) ? (uint32_t)(__NVIC_PRIO_BITS) : (uint32_t)(7UL - PriorityGroupTmp); - SubPriorityBits = ((PriorityGroupTmp + (uint32_t)(__NVIC_PRIO_BITS)) < (uint32_t)7UL) ? (uint32_t)0UL : (uint32_t)((PriorityGroupTmp - 7UL) + (uint32_t)(__NVIC_PRIO_BITS)); - - return ( - ((PreemptPriority & (uint32_t)((1UL << (PreemptPriorityBits)) - 1UL)) << SubPriorityBits) | - ((SubPriority & (uint32_t)((1UL << (SubPriorityBits )) - 1UL))) - ); -} - - -/** - \brief Decode Priority - \details Decodes an interrupt priority value with a given priority group to - preemptive priority value and subpriority value. - In case of a conflict between priority grouping and available - priority bits (__NVIC_PRIO_BITS) the smallest possible priority group is set. - \param [in] Priority Priority value, which can be retrieved with the function \ref NVIC_GetPriority(). - \param [in] PriorityGroup Used priority group. - \param [out] pPreemptPriority Preemptive priority value (starting from 0). - \param [out] pSubPriority Subpriority value (starting from 0). - */ -__STATIC_INLINE void NVIC_DecodePriority (uint32_t Priority, uint32_t PriorityGroup, uint32_t* const pPreemptPriority, uint32_t* const pSubPriority) -{ - uint32_t PriorityGroupTmp = (PriorityGroup & (uint32_t)0x07UL); /* only values 0..7 are used */ - uint32_t PreemptPriorityBits; - uint32_t SubPriorityBits; - - PreemptPriorityBits = ((7UL - PriorityGroupTmp) > (uint32_t)(__NVIC_PRIO_BITS)) ? (uint32_t)(__NVIC_PRIO_BITS) : (uint32_t)(7UL - PriorityGroupTmp); - SubPriorityBits = ((PriorityGroupTmp + (uint32_t)(__NVIC_PRIO_BITS)) < (uint32_t)7UL) ? (uint32_t)0UL : (uint32_t)((PriorityGroupTmp - 7UL) + (uint32_t)(__NVIC_PRIO_BITS)); - - *pPreemptPriority = (Priority >> SubPriorityBits) & (uint32_t)((1UL << (PreemptPriorityBits)) - 1UL); - *pSubPriority = (Priority ) & (uint32_t)((1UL << (SubPriorityBits )) - 1UL); -} - - - -/** - \brief Set Interrupt Vector - \details Sets an interrupt vector in SRAM based interrupt vector table. - The interrupt number can be positive to specify a device specific interrupt, - or negative to specify a processor exception. - Address 0 must be mapped to SRAM. - \param [in] IRQn Interrupt number - \param [in] vector Address of interrupt handler function - */ -__STATIC_INLINE void __NVIC_SetVector(IRQn_Type IRQn, uint32_t vector) -{ - uint32_t *vectors = (uint32_t *)0x0U; - vectors[(int32_t)IRQn + NVIC_USER_IRQ_OFFSET] = vector; -} - - -/** - \brief Get Interrupt Vector - \details Reads an interrupt vector from interrupt vector table. - The interrupt number can be positive to specify a device specific interrupt, - or negative to specify a processor exception. - \param [in] IRQn Interrupt number. - \return Address of interrupt handler function - */ -__STATIC_INLINE uint32_t __NVIC_GetVector(IRQn_Type IRQn) -{ - uint32_t *vectors = (uint32_t *)0x0U; - return vectors[(int32_t)IRQn + NVIC_USER_IRQ_OFFSET]; -} - - -/** - \brief System Reset - \details Initiates a system reset request to reset the MCU. - */ -__NO_RETURN __STATIC_INLINE void __NVIC_SystemReset(void) -{ - __DSB(); /* Ensure all outstanding memory accesses included - buffered write are completed before reset */ - SCB->AIRCR = ((0x5FAUL << SCB_AIRCR_VECTKEY_Pos) | - SCB_AIRCR_SYSRESETREQ_Msk); - __DSB(); /* Ensure completion of memory access */ - - for(;;) /* wait until reset */ - { - __NOP(); - } -} - -/*@} end of CMSIS_Core_NVICFunctions */ - - -/* ########################## FPU functions #################################### */ -/** - \ingroup CMSIS_Core_FunctionInterface - \defgroup CMSIS_Core_FpuFunctions FPU Functions - \brief Function that provides FPU type. - @{ - */ - -/** - \brief get FPU type - \details returns the FPU type - \returns - - \b 0: No FPU - - \b 1: Single precision FPU - - \b 2: Double + Single precision FPU - */ -__STATIC_INLINE uint32_t SCB_GetFPUType(void) -{ - return 0U; /* No FPU */ -} - - -/*@} end of CMSIS_Core_FpuFunctions */ - - - -/* ################################## SysTick function ############################################ */ -/** - \ingroup CMSIS_Core_FunctionInterface - \defgroup CMSIS_Core_SysTickFunctions SysTick Functions - \brief Functions that configure the System. - @{ - */ - -#if defined (__Vendor_SysTickConfig) && (__Vendor_SysTickConfig == 0U) - -/** - \brief System Tick Configuration - \details Initializes the System Timer and its interrupt, and starts the System Tick Timer. - Counter is in free running mode to generate periodic interrupts. - \param [in] ticks Number of ticks between two interrupts. - \return 0 Function succeeded. - \return 1 Function failed. - \note When the variable __Vendor_SysTickConfig is set to 1, then the - function SysTick_Config is not included. In this case, the file device.h - must contain a vendor-specific implementation of this function. - */ -__STATIC_INLINE uint32_t SysTick_Config(uint32_t ticks) -{ - if ((ticks - 1UL) > SysTick_LOAD_RELOAD_Msk) - { - return (1UL); /* Reload value impossible */ - } - - SysTick->LOAD = (uint32_t)(ticks - 1UL); /* set reload register */ - NVIC_SetPriority (SysTick_IRQn, (1UL << __NVIC_PRIO_BITS) - 1UL); /* set Priority for Systick Interrupt */ - SysTick->VAL = 0UL; /* Load the SysTick Counter Value */ - SysTick->CTRL = SysTick_CTRL_CLKSOURCE_Msk | - SysTick_CTRL_TICKINT_Msk | - SysTick_CTRL_ENABLE_Msk; /* Enable SysTick IRQ and SysTick Timer */ - return (0UL); /* Function successful */ -} - -#endif - -/*@} end of CMSIS_Core_SysTickFunctions */ - - - - -#ifdef __cplusplus -} -#endif - -#endif /* __CORE_CM0_H_DEPENDANT */ - -#endif /* __CMSIS_GENERIC */ diff --git a/test_dma/Drivers/CMSIS/Include/core_cm0plus.h b/test_dma/Drivers/CMSIS/Include/core_cm0plus.h deleted file mode 100644 index b9377e8..0000000 --- a/test_dma/Drivers/CMSIS/Include/core_cm0plus.h +++ /dev/null @@ -1,1083 +0,0 @@ -/**************************************************************************//** - * @file core_cm0plus.h - * @brief CMSIS Cortex-M0+ Core Peripheral Access Layer Header File - * @version V5.0.6 - * @date 28. May 2018 - ******************************************************************************/ -/* - * Copyright (c) 2009-2018 Arm Limited. All rights reserved. - * - * SPDX-License-Identifier: Apache-2.0 - * - * Licensed under the Apache License, Version 2.0 (the License); you may - * not use this file except in compliance with the License. - * You may obtain a copy of the License at - * - * www.apache.org/licenses/LICENSE-2.0 - * - * Unless required by applicable law or agreed to in writing, software - * distributed under the License is distributed on an AS IS BASIS, WITHOUT - * WARRANTIES OR CONDITIONS OF ANY KIND, either express or implied. - * See the License for the specific language governing permissions and - * limitations under the License. - */ - -#if defined ( __ICCARM__ ) - #pragma system_include /* treat file as system include file for MISRA check */ -#elif defined (__clang__) - #pragma clang system_header /* treat file as system include file */ -#endif - -#ifndef __CORE_CM0PLUS_H_GENERIC -#define __CORE_CM0PLUS_H_GENERIC - -#include - -#ifdef __cplusplus - extern "C" { -#endif - -/** - \page CMSIS_MISRA_Exceptions MISRA-C:2004 Compliance Exceptions - CMSIS violates the following MISRA-C:2004 rules: - - \li Required Rule 8.5, object/function definition in header file.
- Function definitions in header files are used to allow 'inlining'. - - \li Required Rule 18.4, declaration of union type or object of union type: '{...}'.
- Unions are used for effective representation of core registers. - - \li Advisory Rule 19.7, Function-like macro defined.
- Function-like macros are used to allow more efficient code. - */ - - -/******************************************************************************* - * CMSIS definitions - ******************************************************************************/ -/** - \ingroup Cortex-M0+ - @{ - */ - -#include "cmsis_version.h" - -/* CMSIS CM0+ definitions */ -#define __CM0PLUS_CMSIS_VERSION_MAIN (__CM_CMSIS_VERSION_MAIN) /*!< \deprecated [31:16] CMSIS HAL main version */ -#define __CM0PLUS_CMSIS_VERSION_SUB (__CM_CMSIS_VERSION_SUB) /*!< \deprecated [15:0] CMSIS HAL sub version */ -#define __CM0PLUS_CMSIS_VERSION ((__CM0PLUS_CMSIS_VERSION_MAIN << 16U) | \ - __CM0PLUS_CMSIS_VERSION_SUB ) /*!< \deprecated CMSIS HAL version number */ - -#define __CORTEX_M (0U) /*!< Cortex-M Core */ - -/** __FPU_USED indicates whether an FPU is used or not. - This core does not support an FPU at all -*/ -#define __FPU_USED 0U - -#if defined ( __CC_ARM ) - #if defined __TARGET_FPU_VFP - #error "Compiler generates FPU instructions for a device without an FPU (check __FPU_PRESENT)" - #endif - -#elif defined (__ARMCC_VERSION) && (__ARMCC_VERSION >= 6010050) - #if defined __ARM_PCS_VFP - #error "Compiler generates FPU instructions for a device without an FPU (check __FPU_PRESENT)" - #endif - -#elif defined ( __GNUC__ ) - #if defined (__VFP_FP__) && !defined(__SOFTFP__) - #error "Compiler generates FPU instructions for a device without an FPU (check __FPU_PRESENT)" - #endif - -#elif defined ( __ICCARM__ ) - #if defined __ARMVFP__ - #error "Compiler generates FPU instructions for a device without an FPU (check __FPU_PRESENT)" - #endif - -#elif defined ( __TI_ARM__ ) - #if defined __TI_VFP_SUPPORT__ - #error "Compiler generates FPU instructions for a device without an FPU (check __FPU_PRESENT)" - #endif - -#elif defined ( __TASKING__ ) - #if defined __FPU_VFP__ - #error "Compiler generates FPU instructions for a device without an FPU (check __FPU_PRESENT)" - #endif - -#elif defined ( __CSMC__ ) - #if ( __CSMC__ & 0x400U) - #error "Compiler generates FPU instructions for a device without an FPU (check __FPU_PRESENT)" - #endif - -#endif - -#include "cmsis_compiler.h" /* CMSIS compiler specific defines */ - - -#ifdef __cplusplus -} -#endif - -#endif /* __CORE_CM0PLUS_H_GENERIC */ - -#ifndef __CMSIS_GENERIC - -#ifndef __CORE_CM0PLUS_H_DEPENDANT -#define __CORE_CM0PLUS_H_DEPENDANT - -#ifdef __cplusplus - extern "C" { -#endif - -/* check device defines and use defaults */ -#if defined __CHECK_DEVICE_DEFINES - #ifndef __CM0PLUS_REV - #define __CM0PLUS_REV 0x0000U - #warning "__CM0PLUS_REV not defined in device header file; using default!" - #endif - - #ifndef __MPU_PRESENT - #define __MPU_PRESENT 0U - #warning "__MPU_PRESENT not defined in device header file; using default!" - #endif - - #ifndef __VTOR_PRESENT - #define __VTOR_PRESENT 0U - #warning "__VTOR_PRESENT not defined in device header file; using default!" - #endif - - #ifndef __NVIC_PRIO_BITS - #define __NVIC_PRIO_BITS 2U - #warning "__NVIC_PRIO_BITS not defined in device header file; using default!" - #endif - - #ifndef __Vendor_SysTickConfig - #define __Vendor_SysTickConfig 0U - #warning "__Vendor_SysTickConfig not defined in device header file; using default!" - #endif -#endif - -/* IO definitions (access restrictions to peripheral registers) */ -/** - \defgroup CMSIS_glob_defs CMSIS Global Defines - - IO Type Qualifiers are used - \li to specify the access to peripheral variables. - \li for automatic generation of peripheral register debug information. -*/ -#ifdef __cplusplus - #define __I volatile /*!< Defines 'read only' permissions */ -#else - #define __I volatile const /*!< Defines 'read only' permissions */ -#endif -#define __O volatile /*!< Defines 'write only' permissions */ -#define __IO volatile /*!< Defines 'read / write' permissions */ - -/* following defines should be used for structure members */ -#define __IM volatile const /*! Defines 'read only' structure member permissions */ -#define __OM volatile /*! Defines 'write only' structure member permissions */ -#define __IOM volatile /*! Defines 'read / write' structure member permissions */ - -/*@} end of group Cortex-M0+ */ - - - -/******************************************************************************* - * Register Abstraction - Core Register contain: - - Core Register - - Core NVIC Register - - Core SCB Register - - Core SysTick Register - - Core MPU Register - ******************************************************************************/ -/** - \defgroup CMSIS_core_register Defines and Type Definitions - \brief Type definitions and defines for Cortex-M processor based devices. -*/ - -/** - \ingroup CMSIS_core_register - \defgroup CMSIS_CORE Status and Control Registers - \brief Core Register type definitions. - @{ - */ - -/** - \brief Union type to access the Application Program Status Register (APSR). - */ -typedef union -{ - struct - { - uint32_t _reserved0:28; /*!< bit: 0..27 Reserved */ - uint32_t V:1; /*!< bit: 28 Overflow condition code flag */ - uint32_t C:1; /*!< bit: 29 Carry condition code flag */ - uint32_t Z:1; /*!< bit: 30 Zero condition code flag */ - uint32_t N:1; /*!< bit: 31 Negative condition code flag */ - } b; /*!< Structure used for bit access */ - uint32_t w; /*!< Type used for word access */ -} APSR_Type; - -/* APSR Register Definitions */ -#define APSR_N_Pos 31U /*!< APSR: N Position */ -#define APSR_N_Msk (1UL << APSR_N_Pos) /*!< APSR: N Mask */ - -#define APSR_Z_Pos 30U /*!< APSR: Z Position */ -#define APSR_Z_Msk (1UL << APSR_Z_Pos) /*!< APSR: Z Mask */ - -#define APSR_C_Pos 29U /*!< APSR: C Position */ -#define APSR_C_Msk (1UL << APSR_C_Pos) /*!< APSR: C Mask */ - -#define APSR_V_Pos 28U /*!< APSR: V Position */ -#define APSR_V_Msk (1UL << APSR_V_Pos) /*!< APSR: V Mask */ - - -/** - \brief Union type to access the Interrupt Program Status Register (IPSR). - */ -typedef union -{ - struct - { - uint32_t ISR:9; /*!< bit: 0.. 8 Exception number */ - uint32_t _reserved0:23; /*!< bit: 9..31 Reserved */ - } b; /*!< Structure used for bit access */ - uint32_t w; /*!< Type used for word access */ -} IPSR_Type; - -/* IPSR Register Definitions */ -#define IPSR_ISR_Pos 0U /*!< IPSR: ISR Position */ -#define IPSR_ISR_Msk (0x1FFUL /*<< IPSR_ISR_Pos*/) /*!< IPSR: ISR Mask */ - - -/** - \brief Union type to access the Special-Purpose Program Status Registers (xPSR). - */ -typedef union -{ - struct - { - uint32_t ISR:9; /*!< bit: 0.. 8 Exception number */ - uint32_t _reserved0:15; /*!< bit: 9..23 Reserved */ - uint32_t T:1; /*!< bit: 24 Thumb bit (read 0) */ - uint32_t _reserved1:3; /*!< bit: 25..27 Reserved */ - uint32_t V:1; /*!< bit: 28 Overflow condition code flag */ - uint32_t C:1; /*!< bit: 29 Carry condition code flag */ - uint32_t Z:1; /*!< bit: 30 Zero condition code flag */ - uint32_t N:1; /*!< bit: 31 Negative condition code flag */ - } b; /*!< Structure used for bit access */ - uint32_t w; /*!< Type used for word access */ -} xPSR_Type; - -/* xPSR Register Definitions */ -#define xPSR_N_Pos 31U /*!< xPSR: N Position */ -#define xPSR_N_Msk (1UL << xPSR_N_Pos) /*!< xPSR: N Mask */ - -#define xPSR_Z_Pos 30U /*!< xPSR: Z Position */ -#define xPSR_Z_Msk (1UL << xPSR_Z_Pos) /*!< xPSR: Z Mask */ - -#define xPSR_C_Pos 29U /*!< xPSR: C Position */ -#define xPSR_C_Msk (1UL << xPSR_C_Pos) /*!< xPSR: C Mask */ - -#define xPSR_V_Pos 28U /*!< xPSR: V Position */ -#define xPSR_V_Msk (1UL << xPSR_V_Pos) /*!< xPSR: V Mask */ - -#define xPSR_T_Pos 24U /*!< xPSR: T Position */ -#define xPSR_T_Msk (1UL << xPSR_T_Pos) /*!< xPSR: T Mask */ - -#define xPSR_ISR_Pos 0U /*!< xPSR: ISR Position */ -#define xPSR_ISR_Msk (0x1FFUL /*<< xPSR_ISR_Pos*/) /*!< xPSR: ISR Mask */ - - -/** - \brief Union type to access the Control Registers (CONTROL). - */ -typedef union -{ - struct - { - uint32_t nPRIV:1; /*!< bit: 0 Execution privilege in Thread mode */ - uint32_t SPSEL:1; /*!< bit: 1 Stack to be used */ - uint32_t _reserved1:30; /*!< bit: 2..31 Reserved */ - } b; /*!< Structure used for bit access */ - uint32_t w; /*!< Type used for word access */ -} CONTROL_Type; - -/* CONTROL Register Definitions */ -#define CONTROL_SPSEL_Pos 1U /*!< CONTROL: SPSEL Position */ -#define CONTROL_SPSEL_Msk (1UL << CONTROL_SPSEL_Pos) /*!< CONTROL: SPSEL Mask */ - -#define CONTROL_nPRIV_Pos 0U /*!< CONTROL: nPRIV Position */ -#define CONTROL_nPRIV_Msk (1UL /*<< CONTROL_nPRIV_Pos*/) /*!< CONTROL: nPRIV Mask */ - -/*@} end of group CMSIS_CORE */ - - -/** - \ingroup CMSIS_core_register - \defgroup CMSIS_NVIC Nested Vectored Interrupt Controller (NVIC) - \brief Type definitions for the NVIC Registers - @{ - */ - -/** - \brief Structure type to access the Nested Vectored Interrupt Controller (NVIC). - */ -typedef struct -{ - __IOM uint32_t ISER[1U]; /*!< Offset: 0x000 (R/W) Interrupt Set Enable Register */ - uint32_t RESERVED0[31U]; - __IOM uint32_t ICER[1U]; /*!< Offset: 0x080 (R/W) Interrupt Clear Enable Register */ - uint32_t RSERVED1[31U]; - __IOM uint32_t ISPR[1U]; /*!< Offset: 0x100 (R/W) Interrupt Set Pending Register */ - uint32_t RESERVED2[31U]; - __IOM uint32_t ICPR[1U]; /*!< Offset: 0x180 (R/W) Interrupt Clear Pending Register */ - uint32_t RESERVED3[31U]; - uint32_t RESERVED4[64U]; - __IOM uint32_t IP[8U]; /*!< Offset: 0x300 (R/W) Interrupt Priority Register */ -} NVIC_Type; - -/*@} end of group CMSIS_NVIC */ - - -/** - \ingroup CMSIS_core_register - \defgroup CMSIS_SCB System Control Block (SCB) - \brief Type definitions for the System Control Block Registers - @{ - */ - -/** - \brief Structure type to access the System Control Block (SCB). - */ -typedef struct -{ - __IM uint32_t CPUID; /*!< Offset: 0x000 (R/ ) CPUID Base Register */ - __IOM uint32_t ICSR; /*!< Offset: 0x004 (R/W) Interrupt Control and State Register */ -#if defined (__VTOR_PRESENT) && (__VTOR_PRESENT == 1U) - __IOM uint32_t VTOR; /*!< Offset: 0x008 (R/W) Vector Table Offset Register */ -#else - uint32_t RESERVED0; -#endif - __IOM uint32_t AIRCR; /*!< Offset: 0x00C (R/W) Application Interrupt and Reset Control Register */ - __IOM uint32_t SCR; /*!< Offset: 0x010 (R/W) System Control Register */ - __IOM uint32_t CCR; /*!< Offset: 0x014 (R/W) Configuration Control Register */ - uint32_t RESERVED1; - __IOM uint32_t SHP[2U]; /*!< Offset: 0x01C (R/W) System Handlers Priority Registers. [0] is RESERVED */ - __IOM uint32_t SHCSR; /*!< Offset: 0x024 (R/W) System Handler Control and State Register */ -} SCB_Type; - -/* SCB CPUID Register Definitions */ -#define SCB_CPUID_IMPLEMENTER_Pos 24U /*!< SCB CPUID: IMPLEMENTER Position */ -#define SCB_CPUID_IMPLEMENTER_Msk (0xFFUL << SCB_CPUID_IMPLEMENTER_Pos) /*!< SCB CPUID: IMPLEMENTER Mask */ - -#define SCB_CPUID_VARIANT_Pos 20U /*!< SCB CPUID: VARIANT Position */ -#define SCB_CPUID_VARIANT_Msk (0xFUL << SCB_CPUID_VARIANT_Pos) /*!< SCB CPUID: VARIANT Mask */ - -#define SCB_CPUID_ARCHITECTURE_Pos 16U /*!< SCB CPUID: ARCHITECTURE Position */ -#define SCB_CPUID_ARCHITECTURE_Msk (0xFUL << SCB_CPUID_ARCHITECTURE_Pos) /*!< SCB CPUID: ARCHITECTURE Mask */ - -#define SCB_CPUID_PARTNO_Pos 4U /*!< SCB CPUID: PARTNO Position */ -#define SCB_CPUID_PARTNO_Msk (0xFFFUL << SCB_CPUID_PARTNO_Pos) /*!< SCB CPUID: PARTNO Mask */ - -#define SCB_CPUID_REVISION_Pos 0U /*!< SCB CPUID: REVISION Position */ -#define SCB_CPUID_REVISION_Msk (0xFUL /*<< SCB_CPUID_REVISION_Pos*/) /*!< SCB CPUID: REVISION Mask */ - -/* SCB Interrupt Control State Register Definitions */ -#define SCB_ICSR_NMIPENDSET_Pos 31U /*!< SCB ICSR: NMIPENDSET Position */ -#define SCB_ICSR_NMIPENDSET_Msk (1UL << SCB_ICSR_NMIPENDSET_Pos) /*!< SCB ICSR: NMIPENDSET Mask */ - -#define SCB_ICSR_PENDSVSET_Pos 28U /*!< SCB ICSR: PENDSVSET Position */ -#define SCB_ICSR_PENDSVSET_Msk (1UL << SCB_ICSR_PENDSVSET_Pos) /*!< SCB ICSR: PENDSVSET Mask */ - -#define SCB_ICSR_PENDSVCLR_Pos 27U /*!< SCB ICSR: PENDSVCLR Position */ -#define SCB_ICSR_PENDSVCLR_Msk (1UL << SCB_ICSR_PENDSVCLR_Pos) /*!< SCB ICSR: PENDSVCLR Mask */ - -#define SCB_ICSR_PENDSTSET_Pos 26U /*!< SCB ICSR: PENDSTSET Position */ -#define SCB_ICSR_PENDSTSET_Msk (1UL << SCB_ICSR_PENDSTSET_Pos) /*!< SCB ICSR: PENDSTSET Mask */ - -#define SCB_ICSR_PENDSTCLR_Pos 25U /*!< SCB ICSR: PENDSTCLR Position */ -#define SCB_ICSR_PENDSTCLR_Msk (1UL << SCB_ICSR_PENDSTCLR_Pos) /*!< SCB ICSR: PENDSTCLR Mask */ - -#define SCB_ICSR_ISRPREEMPT_Pos 23U /*!< SCB ICSR: ISRPREEMPT Position */ -#define SCB_ICSR_ISRPREEMPT_Msk (1UL << SCB_ICSR_ISRPREEMPT_Pos) /*!< SCB ICSR: ISRPREEMPT Mask */ - -#define SCB_ICSR_ISRPENDING_Pos 22U /*!< SCB ICSR: ISRPENDING Position */ -#define SCB_ICSR_ISRPENDING_Msk (1UL << SCB_ICSR_ISRPENDING_Pos) /*!< SCB ICSR: ISRPENDING Mask */ - -#define SCB_ICSR_VECTPENDING_Pos 12U /*!< SCB ICSR: VECTPENDING Position */ -#define SCB_ICSR_VECTPENDING_Msk (0x1FFUL << SCB_ICSR_VECTPENDING_Pos) /*!< SCB ICSR: VECTPENDING Mask */ - -#define SCB_ICSR_VECTACTIVE_Pos 0U /*!< SCB ICSR: VECTACTIVE Position */ -#define SCB_ICSR_VECTACTIVE_Msk (0x1FFUL /*<< SCB_ICSR_VECTACTIVE_Pos*/) /*!< SCB ICSR: VECTACTIVE Mask */ - -#if defined (__VTOR_PRESENT) && (__VTOR_PRESENT == 1U) -/* SCB Interrupt Control State Register Definitions */ -#define SCB_VTOR_TBLOFF_Pos 8U /*!< SCB VTOR: TBLOFF Position */ -#define SCB_VTOR_TBLOFF_Msk (0xFFFFFFUL << SCB_VTOR_TBLOFF_Pos) /*!< SCB VTOR: TBLOFF Mask */ -#endif - -/* SCB Application Interrupt and Reset Control Register Definitions */ -#define SCB_AIRCR_VECTKEY_Pos 16U /*!< SCB AIRCR: VECTKEY Position */ -#define SCB_AIRCR_VECTKEY_Msk (0xFFFFUL << SCB_AIRCR_VECTKEY_Pos) /*!< SCB AIRCR: VECTKEY Mask */ - -#define SCB_AIRCR_VECTKEYSTAT_Pos 16U /*!< SCB AIRCR: VECTKEYSTAT Position */ -#define SCB_AIRCR_VECTKEYSTAT_Msk (0xFFFFUL << SCB_AIRCR_VECTKEYSTAT_Pos) /*!< SCB AIRCR: VECTKEYSTAT Mask */ - -#define SCB_AIRCR_ENDIANESS_Pos 15U /*!< SCB AIRCR: ENDIANESS Position */ -#define SCB_AIRCR_ENDIANESS_Msk (1UL << SCB_AIRCR_ENDIANESS_Pos) /*!< SCB AIRCR: ENDIANESS Mask */ - -#define SCB_AIRCR_SYSRESETREQ_Pos 2U /*!< SCB AIRCR: SYSRESETREQ Position */ -#define SCB_AIRCR_SYSRESETREQ_Msk (1UL << SCB_AIRCR_SYSRESETREQ_Pos) /*!< SCB AIRCR: SYSRESETREQ Mask */ - -#define SCB_AIRCR_VECTCLRACTIVE_Pos 1U /*!< SCB AIRCR: VECTCLRACTIVE Position */ -#define SCB_AIRCR_VECTCLRACTIVE_Msk (1UL << SCB_AIRCR_VECTCLRACTIVE_Pos) /*!< SCB AIRCR: VECTCLRACTIVE Mask */ - -/* SCB System Control Register Definitions */ -#define SCB_SCR_SEVONPEND_Pos 4U /*!< SCB SCR: SEVONPEND Position */ -#define SCB_SCR_SEVONPEND_Msk (1UL << SCB_SCR_SEVONPEND_Pos) /*!< SCB SCR: SEVONPEND Mask */ - -#define SCB_SCR_SLEEPDEEP_Pos 2U /*!< SCB SCR: SLEEPDEEP Position */ -#define SCB_SCR_SLEEPDEEP_Msk (1UL << SCB_SCR_SLEEPDEEP_Pos) /*!< SCB SCR: SLEEPDEEP Mask */ - -#define SCB_SCR_SLEEPONEXIT_Pos 1U /*!< SCB SCR: SLEEPONEXIT Position */ -#define SCB_SCR_SLEEPONEXIT_Msk (1UL << SCB_SCR_SLEEPONEXIT_Pos) /*!< SCB SCR: SLEEPONEXIT Mask */ - -/* SCB Configuration Control Register Definitions */ -#define SCB_CCR_STKALIGN_Pos 9U /*!< SCB CCR: STKALIGN Position */ -#define SCB_CCR_STKALIGN_Msk (1UL << SCB_CCR_STKALIGN_Pos) /*!< SCB CCR: STKALIGN Mask */ - -#define SCB_CCR_UNALIGN_TRP_Pos 3U /*!< SCB CCR: UNALIGN_TRP Position */ -#define SCB_CCR_UNALIGN_TRP_Msk (1UL << SCB_CCR_UNALIGN_TRP_Pos) /*!< SCB CCR: UNALIGN_TRP Mask */ - -/* SCB System Handler Control and State Register Definitions */ -#define SCB_SHCSR_SVCALLPENDED_Pos 15U /*!< SCB SHCSR: SVCALLPENDED Position */ -#define SCB_SHCSR_SVCALLPENDED_Msk (1UL << SCB_SHCSR_SVCALLPENDED_Pos) /*!< SCB SHCSR: SVCALLPENDED Mask */ - -/*@} end of group CMSIS_SCB */ - - -/** - \ingroup CMSIS_core_register - \defgroup CMSIS_SysTick System Tick Timer (SysTick) - \brief Type definitions for the System Timer Registers. - @{ - */ - -/** - \brief Structure type to access the System Timer (SysTick). - */ -typedef struct -{ - __IOM uint32_t CTRL; /*!< Offset: 0x000 (R/W) SysTick Control and Status Register */ - __IOM uint32_t LOAD; /*!< Offset: 0x004 (R/W) SysTick Reload Value Register */ - __IOM uint32_t VAL; /*!< Offset: 0x008 (R/W) SysTick Current Value Register */ - __IM uint32_t CALIB; /*!< Offset: 0x00C (R/ ) SysTick Calibration Register */ -} SysTick_Type; - -/* SysTick Control / Status Register Definitions */ -#define SysTick_CTRL_COUNTFLAG_Pos 16U /*!< SysTick CTRL: COUNTFLAG Position */ -#define SysTick_CTRL_COUNTFLAG_Msk (1UL << SysTick_CTRL_COUNTFLAG_Pos) /*!< SysTick CTRL: COUNTFLAG Mask */ - -#define SysTick_CTRL_CLKSOURCE_Pos 2U /*!< SysTick CTRL: CLKSOURCE Position */ -#define SysTick_CTRL_CLKSOURCE_Msk (1UL << SysTick_CTRL_CLKSOURCE_Pos) /*!< SysTick CTRL: CLKSOURCE Mask */ - -#define SysTick_CTRL_TICKINT_Pos 1U /*!< SysTick CTRL: TICKINT Position */ -#define SysTick_CTRL_TICKINT_Msk (1UL << SysTick_CTRL_TICKINT_Pos) /*!< SysTick CTRL: TICKINT Mask */ - -#define SysTick_CTRL_ENABLE_Pos 0U /*!< SysTick CTRL: ENABLE Position */ -#define SysTick_CTRL_ENABLE_Msk (1UL /*<< SysTick_CTRL_ENABLE_Pos*/) /*!< SysTick CTRL: ENABLE Mask */ - -/* SysTick Reload Register Definitions */ -#define SysTick_LOAD_RELOAD_Pos 0U /*!< SysTick LOAD: RELOAD Position */ -#define SysTick_LOAD_RELOAD_Msk (0xFFFFFFUL /*<< SysTick_LOAD_RELOAD_Pos*/) /*!< SysTick LOAD: RELOAD Mask */ - -/* SysTick Current Register Definitions */ -#define SysTick_VAL_CURRENT_Pos 0U /*!< SysTick VAL: CURRENT Position */ -#define SysTick_VAL_CURRENT_Msk (0xFFFFFFUL /*<< SysTick_VAL_CURRENT_Pos*/) /*!< SysTick VAL: CURRENT Mask */ - -/* SysTick Calibration Register Definitions */ -#define SysTick_CALIB_NOREF_Pos 31U /*!< SysTick CALIB: NOREF Position */ -#define SysTick_CALIB_NOREF_Msk (1UL << SysTick_CALIB_NOREF_Pos) /*!< SysTick CALIB: NOREF Mask */ - -#define SysTick_CALIB_SKEW_Pos 30U /*!< SysTick CALIB: SKEW Position */ -#define SysTick_CALIB_SKEW_Msk (1UL << SysTick_CALIB_SKEW_Pos) /*!< SysTick CALIB: SKEW Mask */ - -#define SysTick_CALIB_TENMS_Pos 0U /*!< SysTick CALIB: TENMS Position */ -#define SysTick_CALIB_TENMS_Msk (0xFFFFFFUL /*<< SysTick_CALIB_TENMS_Pos*/) /*!< SysTick CALIB: TENMS Mask */ - -/*@} end of group CMSIS_SysTick */ - -#if defined (__MPU_PRESENT) && (__MPU_PRESENT == 1U) -/** - \ingroup CMSIS_core_register - \defgroup CMSIS_MPU Memory Protection Unit (MPU) - \brief Type definitions for the Memory Protection Unit (MPU) - @{ - */ - -/** - \brief Structure type to access the Memory Protection Unit (MPU). - */ -typedef struct -{ - __IM uint32_t TYPE; /*!< Offset: 0x000 (R/ ) MPU Type Register */ - __IOM uint32_t CTRL; /*!< Offset: 0x004 (R/W) MPU Control Register */ - __IOM uint32_t RNR; /*!< Offset: 0x008 (R/W) MPU Region RNRber Register */ - __IOM uint32_t RBAR; /*!< Offset: 0x00C (R/W) MPU Region Base Address Register */ - __IOM uint32_t RASR; /*!< Offset: 0x010 (R/W) MPU Region Attribute and Size Register */ -} MPU_Type; - -#define MPU_TYPE_RALIASES 1U - -/* MPU Type Register Definitions */ -#define MPU_TYPE_IREGION_Pos 16U /*!< MPU TYPE: IREGION Position */ -#define MPU_TYPE_IREGION_Msk (0xFFUL << MPU_TYPE_IREGION_Pos) /*!< MPU TYPE: IREGION Mask */ - -#define MPU_TYPE_DREGION_Pos 8U /*!< MPU TYPE: DREGION Position */ -#define MPU_TYPE_DREGION_Msk (0xFFUL << MPU_TYPE_DREGION_Pos) /*!< MPU TYPE: DREGION Mask */ - -#define MPU_TYPE_SEPARATE_Pos 0U /*!< MPU TYPE: SEPARATE Position */ -#define MPU_TYPE_SEPARATE_Msk (1UL /*<< MPU_TYPE_SEPARATE_Pos*/) /*!< MPU TYPE: SEPARATE Mask */ - -/* MPU Control Register Definitions */ -#define MPU_CTRL_PRIVDEFENA_Pos 2U /*!< MPU CTRL: PRIVDEFENA Position */ -#define MPU_CTRL_PRIVDEFENA_Msk (1UL << MPU_CTRL_PRIVDEFENA_Pos) /*!< MPU CTRL: PRIVDEFENA Mask */ - -#define MPU_CTRL_HFNMIENA_Pos 1U /*!< MPU CTRL: HFNMIENA Position */ -#define MPU_CTRL_HFNMIENA_Msk (1UL << MPU_CTRL_HFNMIENA_Pos) /*!< MPU CTRL: HFNMIENA Mask */ - -#define MPU_CTRL_ENABLE_Pos 0U /*!< MPU CTRL: ENABLE Position */ -#define MPU_CTRL_ENABLE_Msk (1UL /*<< MPU_CTRL_ENABLE_Pos*/) /*!< MPU CTRL: ENABLE Mask */ - -/* MPU Region Number Register Definitions */ -#define MPU_RNR_REGION_Pos 0U /*!< MPU RNR: REGION Position */ -#define MPU_RNR_REGION_Msk (0xFFUL /*<< MPU_RNR_REGION_Pos*/) /*!< MPU RNR: REGION Mask */ - -/* MPU Region Base Address Register Definitions */ -#define MPU_RBAR_ADDR_Pos 8U /*!< MPU RBAR: ADDR Position */ -#define MPU_RBAR_ADDR_Msk (0xFFFFFFUL << MPU_RBAR_ADDR_Pos) /*!< MPU RBAR: ADDR Mask */ - -#define MPU_RBAR_VALID_Pos 4U /*!< MPU RBAR: VALID Position */ -#define MPU_RBAR_VALID_Msk (1UL << MPU_RBAR_VALID_Pos) /*!< MPU RBAR: VALID Mask */ - -#define MPU_RBAR_REGION_Pos 0U /*!< MPU RBAR: REGION Position */ -#define MPU_RBAR_REGION_Msk (0xFUL /*<< MPU_RBAR_REGION_Pos*/) /*!< MPU RBAR: REGION Mask */ - -/* MPU Region Attribute and Size Register Definitions */ -#define MPU_RASR_ATTRS_Pos 16U /*!< MPU RASR: MPU Region Attribute field Position */ -#define MPU_RASR_ATTRS_Msk (0xFFFFUL << MPU_RASR_ATTRS_Pos) /*!< MPU RASR: MPU Region Attribute field Mask */ - -#define MPU_RASR_XN_Pos 28U /*!< MPU RASR: ATTRS.XN Position */ -#define MPU_RASR_XN_Msk (1UL << MPU_RASR_XN_Pos) /*!< MPU RASR: ATTRS.XN Mask */ - -#define MPU_RASR_AP_Pos 24U /*!< MPU RASR: ATTRS.AP Position */ -#define MPU_RASR_AP_Msk (0x7UL << MPU_RASR_AP_Pos) /*!< MPU RASR: ATTRS.AP Mask */ - -#define MPU_RASR_TEX_Pos 19U /*!< MPU RASR: ATTRS.TEX Position */ -#define MPU_RASR_TEX_Msk (0x7UL << MPU_RASR_TEX_Pos) /*!< MPU RASR: ATTRS.TEX Mask */ - -#define MPU_RASR_S_Pos 18U /*!< MPU RASR: ATTRS.S Position */ -#define MPU_RASR_S_Msk (1UL << MPU_RASR_S_Pos) /*!< MPU RASR: ATTRS.S Mask */ - -#define MPU_RASR_C_Pos 17U /*!< MPU RASR: ATTRS.C Position */ -#define MPU_RASR_C_Msk (1UL << MPU_RASR_C_Pos) /*!< MPU RASR: ATTRS.C Mask */ - -#define MPU_RASR_B_Pos 16U /*!< MPU RASR: ATTRS.B Position */ -#define MPU_RASR_B_Msk (1UL << MPU_RASR_B_Pos) /*!< MPU RASR: ATTRS.B Mask */ - -#define MPU_RASR_SRD_Pos 8U /*!< MPU RASR: Sub-Region Disable Position */ -#define MPU_RASR_SRD_Msk (0xFFUL << MPU_RASR_SRD_Pos) /*!< MPU RASR: Sub-Region Disable Mask */ - -#define MPU_RASR_SIZE_Pos 1U /*!< MPU RASR: Region Size Field Position */ -#define MPU_RASR_SIZE_Msk (0x1FUL << MPU_RASR_SIZE_Pos) /*!< MPU RASR: Region Size Field Mask */ - -#define MPU_RASR_ENABLE_Pos 0U /*!< MPU RASR: Region enable bit Position */ -#define MPU_RASR_ENABLE_Msk (1UL /*<< MPU_RASR_ENABLE_Pos*/) /*!< MPU RASR: Region enable bit Disable Mask */ - -/*@} end of group CMSIS_MPU */ -#endif - - -/** - \ingroup CMSIS_core_register - \defgroup CMSIS_CoreDebug Core Debug Registers (CoreDebug) - \brief Cortex-M0+ Core Debug Registers (DCB registers, SHCSR, and DFSR) are only accessible over DAP and not via processor. - Therefore they are not covered by the Cortex-M0+ header file. - @{ - */ -/*@} end of group CMSIS_CoreDebug */ - - -/** - \ingroup CMSIS_core_register - \defgroup CMSIS_core_bitfield Core register bit field macros - \brief Macros for use with bit field definitions (xxx_Pos, xxx_Msk). - @{ - */ - -/** - \brief Mask and shift a bit field value for use in a register bit range. - \param[in] field Name of the register bit field. - \param[in] value Value of the bit field. This parameter is interpreted as an uint32_t type. - \return Masked and shifted value. -*/ -#define _VAL2FLD(field, value) (((uint32_t)(value) << field ## _Pos) & field ## _Msk) - -/** - \brief Mask and shift a register value to extract a bit filed value. - \param[in] field Name of the register bit field. - \param[in] value Value of register. This parameter is interpreted as an uint32_t type. - \return Masked and shifted bit field value. -*/ -#define _FLD2VAL(field, value) (((uint32_t)(value) & field ## _Msk) >> field ## _Pos) - -/*@} end of group CMSIS_core_bitfield */ - - -/** - \ingroup CMSIS_core_register - \defgroup CMSIS_core_base Core Definitions - \brief Definitions for base addresses, unions, and structures. - @{ - */ - -/* Memory mapping of Core Hardware */ -#define SCS_BASE (0xE000E000UL) /*!< System Control Space Base Address */ -#define SysTick_BASE (SCS_BASE + 0x0010UL) /*!< SysTick Base Address */ -#define NVIC_BASE (SCS_BASE + 0x0100UL) /*!< NVIC Base Address */ -#define SCB_BASE (SCS_BASE + 0x0D00UL) /*!< System Control Block Base Address */ - -#define SCB ((SCB_Type *) SCB_BASE ) /*!< SCB configuration struct */ -#define SysTick ((SysTick_Type *) SysTick_BASE ) /*!< SysTick configuration struct */ -#define NVIC ((NVIC_Type *) NVIC_BASE ) /*!< NVIC configuration struct */ - -#if defined (__MPU_PRESENT) && (__MPU_PRESENT == 1U) - #define MPU_BASE (SCS_BASE + 0x0D90UL) /*!< Memory Protection Unit */ - #define MPU ((MPU_Type *) MPU_BASE ) /*!< Memory Protection Unit */ -#endif - -/*@} */ - - - -/******************************************************************************* - * Hardware Abstraction Layer - Core Function Interface contains: - - Core NVIC Functions - - Core SysTick Functions - - Core Register Access Functions - ******************************************************************************/ -/** - \defgroup CMSIS_Core_FunctionInterface Functions and Instructions Reference -*/ - - - -/* ########################## NVIC functions #################################### */ -/** - \ingroup CMSIS_Core_FunctionInterface - \defgroup CMSIS_Core_NVICFunctions NVIC Functions - \brief Functions that manage interrupts and exceptions via the NVIC. - @{ - */ - -#ifdef CMSIS_NVIC_VIRTUAL - #ifndef CMSIS_NVIC_VIRTUAL_HEADER_FILE - #define CMSIS_NVIC_VIRTUAL_HEADER_FILE "cmsis_nvic_virtual.h" - #endif - #include CMSIS_NVIC_VIRTUAL_HEADER_FILE -#else - #define NVIC_SetPriorityGrouping __NVIC_SetPriorityGrouping - #define NVIC_GetPriorityGrouping __NVIC_GetPriorityGrouping - #define NVIC_EnableIRQ __NVIC_EnableIRQ - #define NVIC_GetEnableIRQ __NVIC_GetEnableIRQ - #define NVIC_DisableIRQ __NVIC_DisableIRQ - #define NVIC_GetPendingIRQ __NVIC_GetPendingIRQ - #define NVIC_SetPendingIRQ __NVIC_SetPendingIRQ - #define NVIC_ClearPendingIRQ __NVIC_ClearPendingIRQ -/*#define NVIC_GetActive __NVIC_GetActive not available for Cortex-M0+ */ - #define NVIC_SetPriority __NVIC_SetPriority - #define NVIC_GetPriority __NVIC_GetPriority - #define NVIC_SystemReset __NVIC_SystemReset -#endif /* CMSIS_NVIC_VIRTUAL */ - -#ifdef CMSIS_VECTAB_VIRTUAL - #ifndef CMSIS_VECTAB_VIRTUAL_HEADER_FILE - #define CMSIS_VECTAB_VIRTUAL_HEADER_FILE "cmsis_vectab_virtual.h" - #endif - #include CMSIS_VECTAB_VIRTUAL_HEADER_FILE -#else - #define NVIC_SetVector __NVIC_SetVector - #define NVIC_GetVector __NVIC_GetVector -#endif /* (CMSIS_VECTAB_VIRTUAL) */ - -#define NVIC_USER_IRQ_OFFSET 16 - - -/* The following EXC_RETURN values are saved the LR on exception entry */ -#define EXC_RETURN_HANDLER (0xFFFFFFF1UL) /* return to Handler mode, uses MSP after return */ -#define EXC_RETURN_THREAD_MSP (0xFFFFFFF9UL) /* return to Thread mode, uses MSP after return */ -#define EXC_RETURN_THREAD_PSP (0xFFFFFFFDUL) /* return to Thread mode, uses PSP after return */ - - -/* Interrupt Priorities are WORD accessible only under Armv6-M */ -/* The following MACROS handle generation of the register offset and byte masks */ -#define _BIT_SHIFT(IRQn) ( ((((uint32_t)(int32_t)(IRQn)) ) & 0x03UL) * 8UL) -#define _SHP_IDX(IRQn) ( (((((uint32_t)(int32_t)(IRQn)) & 0x0FUL)-8UL) >> 2UL) ) -#define _IP_IDX(IRQn) ( (((uint32_t)(int32_t)(IRQn)) >> 2UL) ) - -#define __NVIC_SetPriorityGrouping(X) (void)(X) -#define __NVIC_GetPriorityGrouping() (0U) - -/** - \brief Enable Interrupt - \details Enables a device specific interrupt in the NVIC interrupt controller. - \param [in] IRQn Device specific interrupt number. - \note IRQn must not be negative. - */ -__STATIC_INLINE void __NVIC_EnableIRQ(IRQn_Type IRQn) -{ - if ((int32_t)(IRQn) >= 0) - { - NVIC->ISER[0U] = (uint32_t)(1UL << (((uint32_t)IRQn) & 0x1FUL)); - } -} - - -/** - \brief Get Interrupt Enable status - \details Returns a device specific interrupt enable status from the NVIC interrupt controller. - \param [in] IRQn Device specific interrupt number. - \return 0 Interrupt is not enabled. - \return 1 Interrupt is enabled. - \note IRQn must not be negative. - */ -__STATIC_INLINE uint32_t __NVIC_GetEnableIRQ(IRQn_Type IRQn) -{ - if ((int32_t)(IRQn) >= 0) - { - return((uint32_t)(((NVIC->ISER[0U] & (1UL << (((uint32_t)IRQn) & 0x1FUL))) != 0UL) ? 1UL : 0UL)); - } - else - { - return(0U); - } -} - - -/** - \brief Disable Interrupt - \details Disables a device specific interrupt in the NVIC interrupt controller. - \param [in] IRQn Device specific interrupt number. - \note IRQn must not be negative. - */ -__STATIC_INLINE void __NVIC_DisableIRQ(IRQn_Type IRQn) -{ - if ((int32_t)(IRQn) >= 0) - { - NVIC->ICER[0U] = (uint32_t)(1UL << (((uint32_t)IRQn) & 0x1FUL)); - __DSB(); - __ISB(); - } -} - - -/** - \brief Get Pending Interrupt - \details Reads the NVIC pending register and returns the pending bit for the specified device specific interrupt. - \param [in] IRQn Device specific interrupt number. - \return 0 Interrupt status is not pending. - \return 1 Interrupt status is pending. - \note IRQn must not be negative. - */ -__STATIC_INLINE uint32_t __NVIC_GetPendingIRQ(IRQn_Type IRQn) -{ - if ((int32_t)(IRQn) >= 0) - { - return((uint32_t)(((NVIC->ISPR[0U] & (1UL << (((uint32_t)IRQn) & 0x1FUL))) != 0UL) ? 1UL : 0UL)); - } - else - { - return(0U); - } -} - - -/** - \brief Set Pending Interrupt - \details Sets the pending bit of a device specific interrupt in the NVIC pending register. - \param [in] IRQn Device specific interrupt number. - \note IRQn must not be negative. - */ -__STATIC_INLINE void __NVIC_SetPendingIRQ(IRQn_Type IRQn) -{ - if ((int32_t)(IRQn) >= 0) - { - NVIC->ISPR[0U] = (uint32_t)(1UL << (((uint32_t)IRQn) & 0x1FUL)); - } -} - - -/** - \brief Clear Pending Interrupt - \details Clears the pending bit of a device specific interrupt in the NVIC pending register. - \param [in] IRQn Device specific interrupt number. - \note IRQn must not be negative. - */ -__STATIC_INLINE void __NVIC_ClearPendingIRQ(IRQn_Type IRQn) -{ - if ((int32_t)(IRQn) >= 0) - { - NVIC->ICPR[0U] = (uint32_t)(1UL << (((uint32_t)IRQn) & 0x1FUL)); - } -} - - -/** - \brief Set Interrupt Priority - \details Sets the priority of a device specific interrupt or a processor exception. - The interrupt number can be positive to specify a device specific interrupt, - or negative to specify a processor exception. - \param [in] IRQn Interrupt number. - \param [in] priority Priority to set. - \note The priority cannot be set for every processor exception. - */ -__STATIC_INLINE void __NVIC_SetPriority(IRQn_Type IRQn, uint32_t priority) -{ - if ((int32_t)(IRQn) >= 0) - { - NVIC->IP[_IP_IDX(IRQn)] = ((uint32_t)(NVIC->IP[_IP_IDX(IRQn)] & ~(0xFFUL << _BIT_SHIFT(IRQn))) | - (((priority << (8U - __NVIC_PRIO_BITS)) & (uint32_t)0xFFUL) << _BIT_SHIFT(IRQn))); - } - else - { - SCB->SHP[_SHP_IDX(IRQn)] = ((uint32_t)(SCB->SHP[_SHP_IDX(IRQn)] & ~(0xFFUL << _BIT_SHIFT(IRQn))) | - (((priority << (8U - __NVIC_PRIO_BITS)) & (uint32_t)0xFFUL) << _BIT_SHIFT(IRQn))); - } -} - - -/** - \brief Get Interrupt Priority - \details Reads the priority of a device specific interrupt or a processor exception. - The interrupt number can be positive to specify a device specific interrupt, - or negative to specify a processor exception. - \param [in] IRQn Interrupt number. - \return Interrupt Priority. - Value is aligned automatically to the implemented priority bits of the microcontroller. - */ -__STATIC_INLINE uint32_t __NVIC_GetPriority(IRQn_Type IRQn) -{ - - if ((int32_t)(IRQn) >= 0) - { - return((uint32_t)(((NVIC->IP[ _IP_IDX(IRQn)] >> _BIT_SHIFT(IRQn) ) & (uint32_t)0xFFUL) >> (8U - __NVIC_PRIO_BITS))); - } - else - { - return((uint32_t)(((SCB->SHP[_SHP_IDX(IRQn)] >> _BIT_SHIFT(IRQn) ) & (uint32_t)0xFFUL) >> (8U - __NVIC_PRIO_BITS))); - } -} - - -/** - \brief Encode Priority - \details Encodes the priority for an interrupt with the given priority group, - preemptive priority value, and subpriority value. - In case of a conflict between priority grouping and available - priority bits (__NVIC_PRIO_BITS), the smallest possible priority group is set. - \param [in] PriorityGroup Used priority group. - \param [in] PreemptPriority Preemptive priority value (starting from 0). - \param [in] SubPriority Subpriority value (starting from 0). - \return Encoded priority. Value can be used in the function \ref NVIC_SetPriority(). - */ -__STATIC_INLINE uint32_t NVIC_EncodePriority (uint32_t PriorityGroup, uint32_t PreemptPriority, uint32_t SubPriority) -{ - uint32_t PriorityGroupTmp = (PriorityGroup & (uint32_t)0x07UL); /* only values 0..7 are used */ - uint32_t PreemptPriorityBits; - uint32_t SubPriorityBits; - - PreemptPriorityBits = ((7UL - PriorityGroupTmp) > (uint32_t)(__NVIC_PRIO_BITS)) ? (uint32_t)(__NVIC_PRIO_BITS) : (uint32_t)(7UL - PriorityGroupTmp); - SubPriorityBits = ((PriorityGroupTmp + (uint32_t)(__NVIC_PRIO_BITS)) < (uint32_t)7UL) ? (uint32_t)0UL : (uint32_t)((PriorityGroupTmp - 7UL) + (uint32_t)(__NVIC_PRIO_BITS)); - - return ( - ((PreemptPriority & (uint32_t)((1UL << (PreemptPriorityBits)) - 1UL)) << SubPriorityBits) | - ((SubPriority & (uint32_t)((1UL << (SubPriorityBits )) - 1UL))) - ); -} - - -/** - \brief Decode Priority - \details Decodes an interrupt priority value with a given priority group to - preemptive priority value and subpriority value. - In case of a conflict between priority grouping and available - priority bits (__NVIC_PRIO_BITS) the smallest possible priority group is set. - \param [in] Priority Priority value, which can be retrieved with the function \ref NVIC_GetPriority(). - \param [in] PriorityGroup Used priority group. - \param [out] pPreemptPriority Preemptive priority value (starting from 0). - \param [out] pSubPriority Subpriority value (starting from 0). - */ -__STATIC_INLINE void NVIC_DecodePriority (uint32_t Priority, uint32_t PriorityGroup, uint32_t* const pPreemptPriority, uint32_t* const pSubPriority) -{ - uint32_t PriorityGroupTmp = (PriorityGroup & (uint32_t)0x07UL); /* only values 0..7 are used */ - uint32_t PreemptPriorityBits; - uint32_t SubPriorityBits; - - PreemptPriorityBits = ((7UL - PriorityGroupTmp) > (uint32_t)(__NVIC_PRIO_BITS)) ? (uint32_t)(__NVIC_PRIO_BITS) : (uint32_t)(7UL - PriorityGroupTmp); - SubPriorityBits = ((PriorityGroupTmp + (uint32_t)(__NVIC_PRIO_BITS)) < (uint32_t)7UL) ? (uint32_t)0UL : (uint32_t)((PriorityGroupTmp - 7UL) + (uint32_t)(__NVIC_PRIO_BITS)); - - *pPreemptPriority = (Priority >> SubPriorityBits) & (uint32_t)((1UL << (PreemptPriorityBits)) - 1UL); - *pSubPriority = (Priority ) & (uint32_t)((1UL << (SubPriorityBits )) - 1UL); -} - - -/** - \brief Set Interrupt Vector - \details Sets an interrupt vector in SRAM based interrupt vector table. - The interrupt number can be positive to specify a device specific interrupt, - or negative to specify a processor exception. - VTOR must been relocated to SRAM before. - If VTOR is not present address 0 must be mapped to SRAM. - \param [in] IRQn Interrupt number - \param [in] vector Address of interrupt handler function - */ -__STATIC_INLINE void __NVIC_SetVector(IRQn_Type IRQn, uint32_t vector) -{ -#if defined (__VTOR_PRESENT) && (__VTOR_PRESENT == 1U) - uint32_t *vectors = (uint32_t *)SCB->VTOR; -#else - uint32_t *vectors = (uint32_t *)0x0U; -#endif - vectors[(int32_t)IRQn + NVIC_USER_IRQ_OFFSET] = vector; -} - - -/** - \brief Get Interrupt Vector - \details Reads an interrupt vector from interrupt vector table. - The interrupt number can be positive to specify a device specific interrupt, - or negative to specify a processor exception. - \param [in] IRQn Interrupt number. - \return Address of interrupt handler function - */ -__STATIC_INLINE uint32_t __NVIC_GetVector(IRQn_Type IRQn) -{ -#if defined (__VTOR_PRESENT) && (__VTOR_PRESENT == 1U) - uint32_t *vectors = (uint32_t *)SCB->VTOR; -#else - uint32_t *vectors = (uint32_t *)0x0U; -#endif - return vectors[(int32_t)IRQn + NVIC_USER_IRQ_OFFSET]; - -} - - -/** - \brief System Reset - \details Initiates a system reset request to reset the MCU. - */ -__NO_RETURN __STATIC_INLINE void __NVIC_SystemReset(void) -{ - __DSB(); /* Ensure all outstanding memory accesses included - buffered write are completed before reset */ - SCB->AIRCR = ((0x5FAUL << SCB_AIRCR_VECTKEY_Pos) | - SCB_AIRCR_SYSRESETREQ_Msk); - __DSB(); /* Ensure completion of memory access */ - - for(;;) /* wait until reset */ - { - __NOP(); - } -} - -/*@} end of CMSIS_Core_NVICFunctions */ - -/* ########################## MPU functions #################################### */ - -#if defined (__MPU_PRESENT) && (__MPU_PRESENT == 1U) - -#include "mpu_armv7.h" - -#endif - -/* ########################## FPU functions #################################### */ -/** - \ingroup CMSIS_Core_FunctionInterface - \defgroup CMSIS_Core_FpuFunctions FPU Functions - \brief Function that provides FPU type. - @{ - */ - -/** - \brief get FPU type - \details returns the FPU type - \returns - - \b 0: No FPU - - \b 1: Single precision FPU - - \b 2: Double + Single precision FPU - */ -__STATIC_INLINE uint32_t SCB_GetFPUType(void) -{ - return 0U; /* No FPU */ -} - - -/*@} end of CMSIS_Core_FpuFunctions */ - - - -/* ################################## SysTick function ############################################ */ -/** - \ingroup CMSIS_Core_FunctionInterface - \defgroup CMSIS_Core_SysTickFunctions SysTick Functions - \brief Functions that configure the System. - @{ - */ - -#if defined (__Vendor_SysTickConfig) && (__Vendor_SysTickConfig == 0U) - -/** - \brief System Tick Configuration - \details Initializes the System Timer and its interrupt, and starts the System Tick Timer. - Counter is in free running mode to generate periodic interrupts. - \param [in] ticks Number of ticks between two interrupts. - \return 0 Function succeeded. - \return 1 Function failed. - \note When the variable __Vendor_SysTickConfig is set to 1, then the - function SysTick_Config is not included. In this case, the file device.h - must contain a vendor-specific implementation of this function. - */ -__STATIC_INLINE uint32_t SysTick_Config(uint32_t ticks) -{ - if ((ticks - 1UL) > SysTick_LOAD_RELOAD_Msk) - { - return (1UL); /* Reload value impossible */ - } - - SysTick->LOAD = (uint32_t)(ticks - 1UL); /* set reload register */ - NVIC_SetPriority (SysTick_IRQn, (1UL << __NVIC_PRIO_BITS) - 1UL); /* set Priority for Systick Interrupt */ - SysTick->VAL = 0UL; /* Load the SysTick Counter Value */ - SysTick->CTRL = SysTick_CTRL_CLKSOURCE_Msk | - SysTick_CTRL_TICKINT_Msk | - SysTick_CTRL_ENABLE_Msk; /* Enable SysTick IRQ and SysTick Timer */ - return (0UL); /* Function successful */ -} - -#endif - -/*@} end of CMSIS_Core_SysTickFunctions */ - - - - -#ifdef __cplusplus -} -#endif - -#endif /* __CORE_CM0PLUS_H_DEPENDANT */ - -#endif /* __CMSIS_GENERIC */ diff --git a/test_dma/Drivers/CMSIS/Include/core_cm1.h b/test_dma/Drivers/CMSIS/Include/core_cm1.h deleted file mode 100644 index fd1c407..0000000 --- a/test_dma/Drivers/CMSIS/Include/core_cm1.h +++ /dev/null @@ -1,976 +0,0 @@ -/**************************************************************************//** - * @file core_cm1.h - * @brief CMSIS Cortex-M1 Core Peripheral Access Layer Header File - * @version V1.0.0 - * @date 23. July 2018 - ******************************************************************************/ -/* - * Copyright (c) 2009-2018 Arm Limited. All rights reserved. - * - * SPDX-License-Identifier: Apache-2.0 - * - * Licensed under the Apache License, Version 2.0 (the License); you may - * not use this file except in compliance with the License. - * You may obtain a copy of the License at - * - * www.apache.org/licenses/LICENSE-2.0 - * - * Unless required by applicable law or agreed to in writing, software - * distributed under the License is distributed on an AS IS BASIS, WITHOUT - * WARRANTIES OR CONDITIONS OF ANY KIND, either express or implied. - * See the License for the specific language governing permissions and - * limitations under the License. - */ - -#if defined ( __ICCARM__ ) - #pragma system_include /* treat file as system include file for MISRA check */ -#elif defined (__clang__) - #pragma clang system_header /* treat file as system include file */ -#endif - -#ifndef __CORE_CM1_H_GENERIC -#define __CORE_CM1_H_GENERIC - -#include - -#ifdef __cplusplus - extern "C" { -#endif - -/** - \page CMSIS_MISRA_Exceptions MISRA-C:2004 Compliance Exceptions - CMSIS violates the following MISRA-C:2004 rules: - - \li Required Rule 8.5, object/function definition in header file.
- Function definitions in header files are used to allow 'inlining'. - - \li Required Rule 18.4, declaration of union type or object of union type: '{...}'.
- Unions are used for effective representation of core registers. - - \li Advisory Rule 19.7, Function-like macro defined.
- Function-like macros are used to allow more efficient code. - */ - - -/******************************************************************************* - * CMSIS definitions - ******************************************************************************/ -/** - \ingroup Cortex_M1 - @{ - */ - -#include "cmsis_version.h" - -/* CMSIS CM1 definitions */ -#define __CM1_CMSIS_VERSION_MAIN (__CM_CMSIS_VERSION_MAIN) /*!< \deprecated [31:16] CMSIS HAL main version */ -#define __CM1_CMSIS_VERSION_SUB (__CM_CMSIS_VERSION_SUB) /*!< \deprecated [15:0] CMSIS HAL sub version */ -#define __CM1_CMSIS_VERSION ((__CM1_CMSIS_VERSION_MAIN << 16U) | \ - __CM1_CMSIS_VERSION_SUB ) /*!< \deprecated CMSIS HAL version number */ - -#define __CORTEX_M (1U) /*!< Cortex-M Core */ - -/** __FPU_USED indicates whether an FPU is used or not. - This core does not support an FPU at all -*/ -#define __FPU_USED 0U - -#if defined ( __CC_ARM ) - #if defined __TARGET_FPU_VFP - #error "Compiler generates FPU instructions for a device without an FPU (check __FPU_PRESENT)" - #endif - -#elif defined (__ARMCC_VERSION) && (__ARMCC_VERSION >= 6010050) - #if defined __ARM_PCS_VFP - #error "Compiler generates FPU instructions for a device without an FPU (check __FPU_PRESENT)" - #endif - -#elif defined ( __GNUC__ ) - #if defined (__VFP_FP__) && !defined(__SOFTFP__) - #error "Compiler generates FPU instructions for a device without an FPU (check __FPU_PRESENT)" - #endif - -#elif defined ( __ICCARM__ ) - #if defined __ARMVFP__ - #error "Compiler generates FPU instructions for a device without an FPU (check __FPU_PRESENT)" - #endif - -#elif defined ( __TI_ARM__ ) - #if defined __TI_VFP_SUPPORT__ - #error "Compiler generates FPU instructions for a device without an FPU (check __FPU_PRESENT)" - #endif - -#elif defined ( __TASKING__ ) - #if defined __FPU_VFP__ - #error "Compiler generates FPU instructions for a device without an FPU (check __FPU_PRESENT)" - #endif - -#elif defined ( __CSMC__ ) - #if ( __CSMC__ & 0x400U) - #error "Compiler generates FPU instructions for a device without an FPU (check __FPU_PRESENT)" - #endif - -#endif - -#include "cmsis_compiler.h" /* CMSIS compiler specific defines */ - - -#ifdef __cplusplus -} -#endif - -#endif /* __CORE_CM1_H_GENERIC */ - -#ifndef __CMSIS_GENERIC - -#ifndef __CORE_CM1_H_DEPENDANT -#define __CORE_CM1_H_DEPENDANT - -#ifdef __cplusplus - extern "C" { -#endif - -/* check device defines and use defaults */ -#if defined __CHECK_DEVICE_DEFINES - #ifndef __CM1_REV - #define __CM1_REV 0x0100U - #warning "__CM1_REV not defined in device header file; using default!" - #endif - - #ifndef __NVIC_PRIO_BITS - #define __NVIC_PRIO_BITS 2U - #warning "__NVIC_PRIO_BITS not defined in device header file; using default!" - #endif - - #ifndef __Vendor_SysTickConfig - #define __Vendor_SysTickConfig 0U - #warning "__Vendor_SysTickConfig not defined in device header file; using default!" - #endif -#endif - -/* IO definitions (access restrictions to peripheral registers) */ -/** - \defgroup CMSIS_glob_defs CMSIS Global Defines - - IO Type Qualifiers are used - \li to specify the access to peripheral variables. - \li for automatic generation of peripheral register debug information. -*/ -#ifdef __cplusplus - #define __I volatile /*!< Defines 'read only' permissions */ -#else - #define __I volatile const /*!< Defines 'read only' permissions */ -#endif -#define __O volatile /*!< Defines 'write only' permissions */ -#define __IO volatile /*!< Defines 'read / write' permissions */ - -/* following defines should be used for structure members */ -#define __IM volatile const /*! Defines 'read only' structure member permissions */ -#define __OM volatile /*! Defines 'write only' structure member permissions */ -#define __IOM volatile /*! Defines 'read / write' structure member permissions */ - -/*@} end of group Cortex_M1 */ - - - -/******************************************************************************* - * Register Abstraction - Core Register contain: - - Core Register - - Core NVIC Register - - Core SCB Register - - Core SysTick Register - ******************************************************************************/ -/** - \defgroup CMSIS_core_register Defines and Type Definitions - \brief Type definitions and defines for Cortex-M processor based devices. -*/ - -/** - \ingroup CMSIS_core_register - \defgroup CMSIS_CORE Status and Control Registers - \brief Core Register type definitions. - @{ - */ - -/** - \brief Union type to access the Application Program Status Register (APSR). - */ -typedef union -{ - struct - { - uint32_t _reserved0:28; /*!< bit: 0..27 Reserved */ - uint32_t V:1; /*!< bit: 28 Overflow condition code flag */ - uint32_t C:1; /*!< bit: 29 Carry condition code flag */ - uint32_t Z:1; /*!< bit: 30 Zero condition code flag */ - uint32_t N:1; /*!< bit: 31 Negative condition code flag */ - } b; /*!< Structure used for bit access */ - uint32_t w; /*!< Type used for word access */ -} APSR_Type; - -/* APSR Register Definitions */ -#define APSR_N_Pos 31U /*!< APSR: N Position */ -#define APSR_N_Msk (1UL << APSR_N_Pos) /*!< APSR: N Mask */ - -#define APSR_Z_Pos 30U /*!< APSR: Z Position */ -#define APSR_Z_Msk (1UL << APSR_Z_Pos) /*!< APSR: Z Mask */ - -#define APSR_C_Pos 29U /*!< APSR: C Position */ -#define APSR_C_Msk (1UL << APSR_C_Pos) /*!< APSR: C Mask */ - -#define APSR_V_Pos 28U /*!< APSR: V Position */ -#define APSR_V_Msk (1UL << APSR_V_Pos) /*!< APSR: V Mask */ - - -/** - \brief Union type to access the Interrupt Program Status Register (IPSR). - */ -typedef union -{ - struct - { - uint32_t ISR:9; /*!< bit: 0.. 8 Exception number */ - uint32_t _reserved0:23; /*!< bit: 9..31 Reserved */ - } b; /*!< Structure used for bit access */ - uint32_t w; /*!< Type used for word access */ -} IPSR_Type; - -/* IPSR Register Definitions */ -#define IPSR_ISR_Pos 0U /*!< IPSR: ISR Position */ -#define IPSR_ISR_Msk (0x1FFUL /*<< IPSR_ISR_Pos*/) /*!< IPSR: ISR Mask */ - - -/** - \brief Union type to access the Special-Purpose Program Status Registers (xPSR). - */ -typedef union -{ - struct - { - uint32_t ISR:9; /*!< bit: 0.. 8 Exception number */ - uint32_t _reserved0:15; /*!< bit: 9..23 Reserved */ - uint32_t T:1; /*!< bit: 24 Thumb bit (read 0) */ - uint32_t _reserved1:3; /*!< bit: 25..27 Reserved */ - uint32_t V:1; /*!< bit: 28 Overflow condition code flag */ - uint32_t C:1; /*!< bit: 29 Carry condition code flag */ - uint32_t Z:1; /*!< bit: 30 Zero condition code flag */ - uint32_t N:1; /*!< bit: 31 Negative condition code flag */ - } b; /*!< Structure used for bit access */ - uint32_t w; /*!< Type used for word access */ -} xPSR_Type; - -/* xPSR Register Definitions */ -#define xPSR_N_Pos 31U /*!< xPSR: N Position */ -#define xPSR_N_Msk (1UL << xPSR_N_Pos) /*!< xPSR: N Mask */ - -#define xPSR_Z_Pos 30U /*!< xPSR: Z Position */ -#define xPSR_Z_Msk (1UL << xPSR_Z_Pos) /*!< xPSR: Z Mask */ - -#define xPSR_C_Pos 29U /*!< xPSR: C Position */ -#define xPSR_C_Msk (1UL << xPSR_C_Pos) /*!< xPSR: C Mask */ - -#define xPSR_V_Pos 28U /*!< xPSR: V Position */ -#define xPSR_V_Msk (1UL << xPSR_V_Pos) /*!< xPSR: V Mask */ - -#define xPSR_T_Pos 24U /*!< xPSR: T Position */ -#define xPSR_T_Msk (1UL << xPSR_T_Pos) /*!< xPSR: T Mask */ - -#define xPSR_ISR_Pos 0U /*!< xPSR: ISR Position */ -#define xPSR_ISR_Msk (0x1FFUL /*<< xPSR_ISR_Pos*/) /*!< xPSR: ISR Mask */ - - -/** - \brief Union type to access the Control Registers (CONTROL). - */ -typedef union -{ - struct - { - uint32_t _reserved0:1; /*!< bit: 0 Reserved */ - uint32_t SPSEL:1; /*!< bit: 1 Stack to be used */ - uint32_t _reserved1:30; /*!< bit: 2..31 Reserved */ - } b; /*!< Structure used for bit access */ - uint32_t w; /*!< Type used for word access */ -} CONTROL_Type; - -/* CONTROL Register Definitions */ -#define CONTROL_SPSEL_Pos 1U /*!< CONTROL: SPSEL Position */ -#define CONTROL_SPSEL_Msk (1UL << CONTROL_SPSEL_Pos) /*!< CONTROL: SPSEL Mask */ - -/*@} end of group CMSIS_CORE */ - - -/** - \ingroup CMSIS_core_register - \defgroup CMSIS_NVIC Nested Vectored Interrupt Controller (NVIC) - \brief Type definitions for the NVIC Registers - @{ - */ - -/** - \brief Structure type to access the Nested Vectored Interrupt Controller (NVIC). - */ -typedef struct -{ - __IOM uint32_t ISER[1U]; /*!< Offset: 0x000 (R/W) Interrupt Set Enable Register */ - uint32_t RESERVED0[31U]; - __IOM uint32_t ICER[1U]; /*!< Offset: 0x080 (R/W) Interrupt Clear Enable Register */ - uint32_t RSERVED1[31U]; - __IOM uint32_t ISPR[1U]; /*!< Offset: 0x100 (R/W) Interrupt Set Pending Register */ - uint32_t RESERVED2[31U]; - __IOM uint32_t ICPR[1U]; /*!< Offset: 0x180 (R/W) Interrupt Clear Pending Register */ - uint32_t RESERVED3[31U]; - uint32_t RESERVED4[64U]; - __IOM uint32_t IP[8U]; /*!< Offset: 0x300 (R/W) Interrupt Priority Register */ -} NVIC_Type; - -/*@} end of group CMSIS_NVIC */ - - -/** - \ingroup CMSIS_core_register - \defgroup CMSIS_SCB System Control Block (SCB) - \brief Type definitions for the System Control Block Registers - @{ - */ - -/** - \brief Structure type to access the System Control Block (SCB). - */ -typedef struct -{ - __IM uint32_t CPUID; /*!< Offset: 0x000 (R/ ) CPUID Base Register */ - __IOM uint32_t ICSR; /*!< Offset: 0x004 (R/W) Interrupt Control and State Register */ - uint32_t RESERVED0; - __IOM uint32_t AIRCR; /*!< Offset: 0x00C (R/W) Application Interrupt and Reset Control Register */ - __IOM uint32_t SCR; /*!< Offset: 0x010 (R/W) System Control Register */ - __IOM uint32_t CCR; /*!< Offset: 0x014 (R/W) Configuration Control Register */ - uint32_t RESERVED1; - __IOM uint32_t SHP[2U]; /*!< Offset: 0x01C (R/W) System Handlers Priority Registers. [0] is RESERVED */ - __IOM uint32_t SHCSR; /*!< Offset: 0x024 (R/W) System Handler Control and State Register */ -} SCB_Type; - -/* SCB CPUID Register Definitions */ -#define SCB_CPUID_IMPLEMENTER_Pos 24U /*!< SCB CPUID: IMPLEMENTER Position */ -#define SCB_CPUID_IMPLEMENTER_Msk (0xFFUL << SCB_CPUID_IMPLEMENTER_Pos) /*!< SCB CPUID: IMPLEMENTER Mask */ - -#define SCB_CPUID_VARIANT_Pos 20U /*!< SCB CPUID: VARIANT Position */ -#define SCB_CPUID_VARIANT_Msk (0xFUL << SCB_CPUID_VARIANT_Pos) /*!< SCB CPUID: VARIANT Mask */ - -#define SCB_CPUID_ARCHITECTURE_Pos 16U /*!< SCB CPUID: ARCHITECTURE Position */ -#define SCB_CPUID_ARCHITECTURE_Msk (0xFUL << SCB_CPUID_ARCHITECTURE_Pos) /*!< SCB CPUID: ARCHITECTURE Mask */ - -#define SCB_CPUID_PARTNO_Pos 4U /*!< SCB CPUID: PARTNO Position */ -#define SCB_CPUID_PARTNO_Msk (0xFFFUL << SCB_CPUID_PARTNO_Pos) /*!< SCB CPUID: PARTNO Mask */ - -#define SCB_CPUID_REVISION_Pos 0U /*!< SCB CPUID: REVISION Position */ -#define SCB_CPUID_REVISION_Msk (0xFUL /*<< SCB_CPUID_REVISION_Pos*/) /*!< SCB CPUID: REVISION Mask */ - -/* SCB Interrupt Control State Register Definitions */ -#define SCB_ICSR_NMIPENDSET_Pos 31U /*!< SCB ICSR: NMIPENDSET Position */ -#define SCB_ICSR_NMIPENDSET_Msk (1UL << SCB_ICSR_NMIPENDSET_Pos) /*!< SCB ICSR: NMIPENDSET Mask */ - -#define SCB_ICSR_PENDSVSET_Pos 28U /*!< SCB ICSR: PENDSVSET Position */ -#define SCB_ICSR_PENDSVSET_Msk (1UL << SCB_ICSR_PENDSVSET_Pos) /*!< SCB ICSR: PENDSVSET Mask */ - -#define SCB_ICSR_PENDSVCLR_Pos 27U /*!< SCB ICSR: PENDSVCLR Position */ -#define SCB_ICSR_PENDSVCLR_Msk (1UL << SCB_ICSR_PENDSVCLR_Pos) /*!< SCB ICSR: PENDSVCLR Mask */ - -#define SCB_ICSR_PENDSTSET_Pos 26U /*!< SCB ICSR: PENDSTSET Position */ -#define SCB_ICSR_PENDSTSET_Msk (1UL << SCB_ICSR_PENDSTSET_Pos) /*!< SCB ICSR: PENDSTSET Mask */ - -#define SCB_ICSR_PENDSTCLR_Pos 25U /*!< SCB ICSR: PENDSTCLR Position */ -#define SCB_ICSR_PENDSTCLR_Msk (1UL << SCB_ICSR_PENDSTCLR_Pos) /*!< SCB ICSR: PENDSTCLR Mask */ - -#define SCB_ICSR_ISRPREEMPT_Pos 23U /*!< SCB ICSR: ISRPREEMPT Position */ -#define SCB_ICSR_ISRPREEMPT_Msk (1UL << SCB_ICSR_ISRPREEMPT_Pos) /*!< SCB ICSR: ISRPREEMPT Mask */ - -#define SCB_ICSR_ISRPENDING_Pos 22U /*!< SCB ICSR: ISRPENDING Position */ -#define SCB_ICSR_ISRPENDING_Msk (1UL << SCB_ICSR_ISRPENDING_Pos) /*!< SCB ICSR: ISRPENDING Mask */ - -#define SCB_ICSR_VECTPENDING_Pos 12U /*!< SCB ICSR: VECTPENDING Position */ -#define SCB_ICSR_VECTPENDING_Msk (0x1FFUL << SCB_ICSR_VECTPENDING_Pos) /*!< SCB ICSR: VECTPENDING Mask */ - -#define SCB_ICSR_VECTACTIVE_Pos 0U /*!< SCB ICSR: VECTACTIVE Position */ -#define SCB_ICSR_VECTACTIVE_Msk (0x1FFUL /*<< SCB_ICSR_VECTACTIVE_Pos*/) /*!< SCB ICSR: VECTACTIVE Mask */ - -/* SCB Application Interrupt and Reset Control Register Definitions */ -#define SCB_AIRCR_VECTKEY_Pos 16U /*!< SCB AIRCR: VECTKEY Position */ -#define SCB_AIRCR_VECTKEY_Msk (0xFFFFUL << SCB_AIRCR_VECTKEY_Pos) /*!< SCB AIRCR: VECTKEY Mask */ - -#define SCB_AIRCR_VECTKEYSTAT_Pos 16U /*!< SCB AIRCR: VECTKEYSTAT Position */ -#define SCB_AIRCR_VECTKEYSTAT_Msk (0xFFFFUL << SCB_AIRCR_VECTKEYSTAT_Pos) /*!< SCB AIRCR: VECTKEYSTAT Mask */ - -#define SCB_AIRCR_ENDIANESS_Pos 15U /*!< SCB AIRCR: ENDIANESS Position */ -#define SCB_AIRCR_ENDIANESS_Msk (1UL << SCB_AIRCR_ENDIANESS_Pos) /*!< SCB AIRCR: ENDIANESS Mask */ - -#define SCB_AIRCR_SYSRESETREQ_Pos 2U /*!< SCB AIRCR: SYSRESETREQ Position */ -#define SCB_AIRCR_SYSRESETREQ_Msk (1UL << SCB_AIRCR_SYSRESETREQ_Pos) /*!< SCB AIRCR: SYSRESETREQ Mask */ - -#define SCB_AIRCR_VECTCLRACTIVE_Pos 1U /*!< SCB AIRCR: VECTCLRACTIVE Position */ -#define SCB_AIRCR_VECTCLRACTIVE_Msk (1UL << SCB_AIRCR_VECTCLRACTIVE_Pos) /*!< SCB AIRCR: VECTCLRACTIVE Mask */ - -/* SCB System Control Register Definitions */ -#define SCB_SCR_SEVONPEND_Pos 4U /*!< SCB SCR: SEVONPEND Position */ -#define SCB_SCR_SEVONPEND_Msk (1UL << SCB_SCR_SEVONPEND_Pos) /*!< SCB SCR: SEVONPEND Mask */ - -#define SCB_SCR_SLEEPDEEP_Pos 2U /*!< SCB SCR: SLEEPDEEP Position */ -#define SCB_SCR_SLEEPDEEP_Msk (1UL << SCB_SCR_SLEEPDEEP_Pos) /*!< SCB SCR: SLEEPDEEP Mask */ - -#define SCB_SCR_SLEEPONEXIT_Pos 1U /*!< SCB SCR: SLEEPONEXIT Position */ -#define SCB_SCR_SLEEPONEXIT_Msk (1UL << SCB_SCR_SLEEPONEXIT_Pos) /*!< SCB SCR: SLEEPONEXIT Mask */ - -/* SCB Configuration Control Register Definitions */ -#define SCB_CCR_STKALIGN_Pos 9U /*!< SCB CCR: STKALIGN Position */ -#define SCB_CCR_STKALIGN_Msk (1UL << SCB_CCR_STKALIGN_Pos) /*!< SCB CCR: STKALIGN Mask */ - -#define SCB_CCR_UNALIGN_TRP_Pos 3U /*!< SCB CCR: UNALIGN_TRP Position */ -#define SCB_CCR_UNALIGN_TRP_Msk (1UL << SCB_CCR_UNALIGN_TRP_Pos) /*!< SCB CCR: UNALIGN_TRP Mask */ - -/* SCB System Handler Control and State Register Definitions */ -#define SCB_SHCSR_SVCALLPENDED_Pos 15U /*!< SCB SHCSR: SVCALLPENDED Position */ -#define SCB_SHCSR_SVCALLPENDED_Msk (1UL << SCB_SHCSR_SVCALLPENDED_Pos) /*!< SCB SHCSR: SVCALLPENDED Mask */ - -/*@} end of group CMSIS_SCB */ - - -/** - \ingroup CMSIS_core_register - \defgroup CMSIS_SCnSCB System Controls not in SCB (SCnSCB) - \brief Type definitions for the System Control and ID Register not in the SCB - @{ - */ - -/** - \brief Structure type to access the System Control and ID Register not in the SCB. - */ -typedef struct -{ - uint32_t RESERVED0[2U]; - __IOM uint32_t ACTLR; /*!< Offset: 0x008 (R/W) Auxiliary Control Register */ -} SCnSCB_Type; - -/* Auxiliary Control Register Definitions */ -#define SCnSCB_ACTLR_ITCMUAEN_Pos 4U /*!< ACTLR: Instruction TCM Upper Alias Enable Position */ -#define SCnSCB_ACTLR_ITCMUAEN_Msk (1UL << SCnSCB_ACTLR_ITCMUAEN_Pos) /*!< ACTLR: Instruction TCM Upper Alias Enable Mask */ - -#define SCnSCB_ACTLR_ITCMLAEN_Pos 3U /*!< ACTLR: Instruction TCM Lower Alias Enable Position */ -#define SCnSCB_ACTLR_ITCMLAEN_Msk (1UL << SCnSCB_ACTLR_ITCMLAEN_Pos) /*!< ACTLR: Instruction TCM Lower Alias Enable Mask */ - -/*@} end of group CMSIS_SCnotSCB */ - - -/** - \ingroup CMSIS_core_register - \defgroup CMSIS_SysTick System Tick Timer (SysTick) - \brief Type definitions for the System Timer Registers. - @{ - */ - -/** - \brief Structure type to access the System Timer (SysTick). - */ -typedef struct -{ - __IOM uint32_t CTRL; /*!< Offset: 0x000 (R/W) SysTick Control and Status Register */ - __IOM uint32_t LOAD; /*!< Offset: 0x004 (R/W) SysTick Reload Value Register */ - __IOM uint32_t VAL; /*!< Offset: 0x008 (R/W) SysTick Current Value Register */ - __IM uint32_t CALIB; /*!< Offset: 0x00C (R/ ) SysTick Calibration Register */ -} SysTick_Type; - -/* SysTick Control / Status Register Definitions */ -#define SysTick_CTRL_COUNTFLAG_Pos 16U /*!< SysTick CTRL: COUNTFLAG Position */ -#define SysTick_CTRL_COUNTFLAG_Msk (1UL << SysTick_CTRL_COUNTFLAG_Pos) /*!< SysTick CTRL: COUNTFLAG Mask */ - -#define SysTick_CTRL_CLKSOURCE_Pos 2U /*!< SysTick CTRL: CLKSOURCE Position */ -#define SysTick_CTRL_CLKSOURCE_Msk (1UL << SysTick_CTRL_CLKSOURCE_Pos) /*!< SysTick CTRL: CLKSOURCE Mask */ - -#define SysTick_CTRL_TICKINT_Pos 1U /*!< SysTick CTRL: TICKINT Position */ -#define SysTick_CTRL_TICKINT_Msk (1UL << SysTick_CTRL_TICKINT_Pos) /*!< SysTick CTRL: TICKINT Mask */ - -#define SysTick_CTRL_ENABLE_Pos 0U /*!< SysTick CTRL: ENABLE Position */ -#define SysTick_CTRL_ENABLE_Msk (1UL /*<< SysTick_CTRL_ENABLE_Pos*/) /*!< SysTick CTRL: ENABLE Mask */ - -/* SysTick Reload Register Definitions */ -#define SysTick_LOAD_RELOAD_Pos 0U /*!< SysTick LOAD: RELOAD Position */ -#define SysTick_LOAD_RELOAD_Msk (0xFFFFFFUL /*<< SysTick_LOAD_RELOAD_Pos*/) /*!< SysTick LOAD: RELOAD Mask */ - -/* SysTick Current Register Definitions */ -#define SysTick_VAL_CURRENT_Pos 0U /*!< SysTick VAL: CURRENT Position */ -#define SysTick_VAL_CURRENT_Msk (0xFFFFFFUL /*<< SysTick_VAL_CURRENT_Pos*/) /*!< SysTick VAL: CURRENT Mask */ - -/* SysTick Calibration Register Definitions */ -#define SysTick_CALIB_NOREF_Pos 31U /*!< SysTick CALIB: NOREF Position */ -#define SysTick_CALIB_NOREF_Msk (1UL << SysTick_CALIB_NOREF_Pos) /*!< SysTick CALIB: NOREF Mask */ - -#define SysTick_CALIB_SKEW_Pos 30U /*!< SysTick CALIB: SKEW Position */ -#define SysTick_CALIB_SKEW_Msk (1UL << SysTick_CALIB_SKEW_Pos) /*!< SysTick CALIB: SKEW Mask */ - -#define SysTick_CALIB_TENMS_Pos 0U /*!< SysTick CALIB: TENMS Position */ -#define SysTick_CALIB_TENMS_Msk (0xFFFFFFUL /*<< SysTick_CALIB_TENMS_Pos*/) /*!< SysTick CALIB: TENMS Mask */ - -/*@} end of group CMSIS_SysTick */ - - -/** - \ingroup CMSIS_core_register - \defgroup CMSIS_CoreDebug Core Debug Registers (CoreDebug) - \brief Cortex-M1 Core Debug Registers (DCB registers, SHCSR, and DFSR) are only accessible over DAP and not via processor. - Therefore they are not covered by the Cortex-M1 header file. - @{ - */ -/*@} end of group CMSIS_CoreDebug */ - - -/** - \ingroup CMSIS_core_register - \defgroup CMSIS_core_bitfield Core register bit field macros - \brief Macros for use with bit field definitions (xxx_Pos, xxx_Msk). - @{ - */ - -/** - \brief Mask and shift a bit field value for use in a register bit range. - \param[in] field Name of the register bit field. - \param[in] value Value of the bit field. This parameter is interpreted as an uint32_t type. - \return Masked and shifted value. -*/ -#define _VAL2FLD(field, value) (((uint32_t)(value) << field ## _Pos) & field ## _Msk) - -/** - \brief Mask and shift a register value to extract a bit filed value. - \param[in] field Name of the register bit field. - \param[in] value Value of register. This parameter is interpreted as an uint32_t type. - \return Masked and shifted bit field value. -*/ -#define _FLD2VAL(field, value) (((uint32_t)(value) & field ## _Msk) >> field ## _Pos) - -/*@} end of group CMSIS_core_bitfield */ - - -/** - \ingroup CMSIS_core_register - \defgroup CMSIS_core_base Core Definitions - \brief Definitions for base addresses, unions, and structures. - @{ - */ - -/* Memory mapping of Core Hardware */ -#define SCS_BASE (0xE000E000UL) /*!< System Control Space Base Address */ -#define SysTick_BASE (SCS_BASE + 0x0010UL) /*!< SysTick Base Address */ -#define NVIC_BASE (SCS_BASE + 0x0100UL) /*!< NVIC Base Address */ -#define SCB_BASE (SCS_BASE + 0x0D00UL) /*!< System Control Block Base Address */ - -#define SCnSCB ((SCnSCB_Type *) SCS_BASE ) /*!< System control Register not in SCB */ -#define SCB ((SCB_Type *) SCB_BASE ) /*!< SCB configuration struct */ -#define SysTick ((SysTick_Type *) SysTick_BASE ) /*!< SysTick configuration struct */ -#define NVIC ((NVIC_Type *) NVIC_BASE ) /*!< NVIC configuration struct */ - - -/*@} */ - - - -/******************************************************************************* - * Hardware Abstraction Layer - Core Function Interface contains: - - Core NVIC Functions - - Core SysTick Functions - - Core Register Access Functions - ******************************************************************************/ -/** - \defgroup CMSIS_Core_FunctionInterface Functions and Instructions Reference -*/ - - - -/* ########################## NVIC functions #################################### */ -/** - \ingroup CMSIS_Core_FunctionInterface - \defgroup CMSIS_Core_NVICFunctions NVIC Functions - \brief Functions that manage interrupts and exceptions via the NVIC. - @{ - */ - -#ifdef CMSIS_NVIC_VIRTUAL - #ifndef CMSIS_NVIC_VIRTUAL_HEADER_FILE - #define CMSIS_NVIC_VIRTUAL_HEADER_FILE "cmsis_nvic_virtual.h" - #endif - #include CMSIS_NVIC_VIRTUAL_HEADER_FILE -#else - #define NVIC_SetPriorityGrouping __NVIC_SetPriorityGrouping - #define NVIC_GetPriorityGrouping __NVIC_GetPriorityGrouping - #define NVIC_EnableIRQ __NVIC_EnableIRQ - #define NVIC_GetEnableIRQ __NVIC_GetEnableIRQ - #define NVIC_DisableIRQ __NVIC_DisableIRQ - #define NVIC_GetPendingIRQ __NVIC_GetPendingIRQ - #define NVIC_SetPendingIRQ __NVIC_SetPendingIRQ - #define NVIC_ClearPendingIRQ __NVIC_ClearPendingIRQ -/*#define NVIC_GetActive __NVIC_GetActive not available for Cortex-M1 */ - #define NVIC_SetPriority __NVIC_SetPriority - #define NVIC_GetPriority __NVIC_GetPriority - #define NVIC_SystemReset __NVIC_SystemReset -#endif /* CMSIS_NVIC_VIRTUAL */ - -#ifdef CMSIS_VECTAB_VIRTUAL - #ifndef CMSIS_VECTAB_VIRTUAL_HEADER_FILE - #define CMSIS_VECTAB_VIRTUAL_HEADER_FILE "cmsis_vectab_virtual.h" - #endif - #include CMSIS_VECTAB_VIRTUAL_HEADER_FILE -#else - #define NVIC_SetVector __NVIC_SetVector - #define NVIC_GetVector __NVIC_GetVector -#endif /* (CMSIS_VECTAB_VIRTUAL) */ - -#define NVIC_USER_IRQ_OFFSET 16 - - -/* The following EXC_RETURN values are saved the LR on exception entry */ -#define EXC_RETURN_HANDLER (0xFFFFFFF1UL) /* return to Handler mode, uses MSP after return */ -#define EXC_RETURN_THREAD_MSP (0xFFFFFFF9UL) /* return to Thread mode, uses MSP after return */ -#define EXC_RETURN_THREAD_PSP (0xFFFFFFFDUL) /* return to Thread mode, uses PSP after return */ - - -/* Interrupt Priorities are WORD accessible only under Armv6-M */ -/* The following MACROS handle generation of the register offset and byte masks */ -#define _BIT_SHIFT(IRQn) ( ((((uint32_t)(int32_t)(IRQn)) ) & 0x03UL) * 8UL) -#define _SHP_IDX(IRQn) ( (((((uint32_t)(int32_t)(IRQn)) & 0x0FUL)-8UL) >> 2UL) ) -#define _IP_IDX(IRQn) ( (((uint32_t)(int32_t)(IRQn)) >> 2UL) ) - -#define __NVIC_SetPriorityGrouping(X) (void)(X) -#define __NVIC_GetPriorityGrouping() (0U) - -/** - \brief Enable Interrupt - \details Enables a device specific interrupt in the NVIC interrupt controller. - \param [in] IRQn Device specific interrupt number. - \note IRQn must not be negative. - */ -__STATIC_INLINE void __NVIC_EnableIRQ(IRQn_Type IRQn) -{ - if ((int32_t)(IRQn) >= 0) - { - NVIC->ISER[0U] = (uint32_t)(1UL << (((uint32_t)IRQn) & 0x1FUL)); - } -} - - -/** - \brief Get Interrupt Enable status - \details Returns a device specific interrupt enable status from the NVIC interrupt controller. - \param [in] IRQn Device specific interrupt number. - \return 0 Interrupt is not enabled. - \return 1 Interrupt is enabled. - \note IRQn must not be negative. - */ -__STATIC_INLINE uint32_t __NVIC_GetEnableIRQ(IRQn_Type IRQn) -{ - if ((int32_t)(IRQn) >= 0) - { - return((uint32_t)(((NVIC->ISER[0U] & (1UL << (((uint32_t)IRQn) & 0x1FUL))) != 0UL) ? 1UL : 0UL)); - } - else - { - return(0U); - } -} - - -/** - \brief Disable Interrupt - \details Disables a device specific interrupt in the NVIC interrupt controller. - \param [in] IRQn Device specific interrupt number. - \note IRQn must not be negative. - */ -__STATIC_INLINE void __NVIC_DisableIRQ(IRQn_Type IRQn) -{ - if ((int32_t)(IRQn) >= 0) - { - NVIC->ICER[0U] = (uint32_t)(1UL << (((uint32_t)IRQn) & 0x1FUL)); - __DSB(); - __ISB(); - } -} - - -/** - \brief Get Pending Interrupt - \details Reads the NVIC pending register and returns the pending bit for the specified device specific interrupt. - \param [in] IRQn Device specific interrupt number. - \return 0 Interrupt status is not pending. - \return 1 Interrupt status is pending. - \note IRQn must not be negative. - */ -__STATIC_INLINE uint32_t __NVIC_GetPendingIRQ(IRQn_Type IRQn) -{ - if ((int32_t)(IRQn) >= 0) - { - return((uint32_t)(((NVIC->ISPR[0U] & (1UL << (((uint32_t)IRQn) & 0x1FUL))) != 0UL) ? 1UL : 0UL)); - } - else - { - return(0U); - } -} - - -/** - \brief Set Pending Interrupt - \details Sets the pending bit of a device specific interrupt in the NVIC pending register. - \param [in] IRQn Device specific interrupt number. - \note IRQn must not be negative. - */ -__STATIC_INLINE void __NVIC_SetPendingIRQ(IRQn_Type IRQn) -{ - if ((int32_t)(IRQn) >= 0) - { - NVIC->ISPR[0U] = (uint32_t)(1UL << (((uint32_t)IRQn) & 0x1FUL)); - } -} - - -/** - \brief Clear Pending Interrupt - \details Clears the pending bit of a device specific interrupt in the NVIC pending register. - \param [in] IRQn Device specific interrupt number. - \note IRQn must not be negative. - */ -__STATIC_INLINE void __NVIC_ClearPendingIRQ(IRQn_Type IRQn) -{ - if ((int32_t)(IRQn) >= 0) - { - NVIC->ICPR[0U] = (uint32_t)(1UL << (((uint32_t)IRQn) & 0x1FUL)); - } -} - - -/** - \brief Set Interrupt Priority - \details Sets the priority of a device specific interrupt or a processor exception. - The interrupt number can be positive to specify a device specific interrupt, - or negative to specify a processor exception. - \param [in] IRQn Interrupt number. - \param [in] priority Priority to set. - \note The priority cannot be set for every processor exception. - */ -__STATIC_INLINE void __NVIC_SetPriority(IRQn_Type IRQn, uint32_t priority) -{ - if ((int32_t)(IRQn) >= 0) - { - NVIC->IP[_IP_IDX(IRQn)] = ((uint32_t)(NVIC->IP[_IP_IDX(IRQn)] & ~(0xFFUL << _BIT_SHIFT(IRQn))) | - (((priority << (8U - __NVIC_PRIO_BITS)) & (uint32_t)0xFFUL) << _BIT_SHIFT(IRQn))); - } - else - { - SCB->SHP[_SHP_IDX(IRQn)] = ((uint32_t)(SCB->SHP[_SHP_IDX(IRQn)] & ~(0xFFUL << _BIT_SHIFT(IRQn))) | - (((priority << (8U - __NVIC_PRIO_BITS)) & (uint32_t)0xFFUL) << _BIT_SHIFT(IRQn))); - } -} - - -/** - \brief Get Interrupt Priority - \details Reads the priority of a device specific interrupt or a processor exception. - The interrupt number can be positive to specify a device specific interrupt, - or negative to specify a processor exception. - \param [in] IRQn Interrupt number. - \return Interrupt Priority. - Value is aligned automatically to the implemented priority bits of the microcontroller. - */ -__STATIC_INLINE uint32_t __NVIC_GetPriority(IRQn_Type IRQn) -{ - - if ((int32_t)(IRQn) >= 0) - { - return((uint32_t)(((NVIC->IP[ _IP_IDX(IRQn)] >> _BIT_SHIFT(IRQn) ) & (uint32_t)0xFFUL) >> (8U - __NVIC_PRIO_BITS))); - } - else - { - return((uint32_t)(((SCB->SHP[_SHP_IDX(IRQn)] >> _BIT_SHIFT(IRQn) ) & (uint32_t)0xFFUL) >> (8U - __NVIC_PRIO_BITS))); - } -} - - -/** - \brief Encode Priority - \details Encodes the priority for an interrupt with the given priority group, - preemptive priority value, and subpriority value. - In case of a conflict between priority grouping and available - priority bits (__NVIC_PRIO_BITS), the smallest possible priority group is set. - \param [in] PriorityGroup Used priority group. - \param [in] PreemptPriority Preemptive priority value (starting from 0). - \param [in] SubPriority Subpriority value (starting from 0). - \return Encoded priority. Value can be used in the function \ref NVIC_SetPriority(). - */ -__STATIC_INLINE uint32_t NVIC_EncodePriority (uint32_t PriorityGroup, uint32_t PreemptPriority, uint32_t SubPriority) -{ - uint32_t PriorityGroupTmp = (PriorityGroup & (uint32_t)0x07UL); /* only values 0..7 are used */ - uint32_t PreemptPriorityBits; - uint32_t SubPriorityBits; - - PreemptPriorityBits = ((7UL - PriorityGroupTmp) > (uint32_t)(__NVIC_PRIO_BITS)) ? (uint32_t)(__NVIC_PRIO_BITS) : (uint32_t)(7UL - PriorityGroupTmp); - SubPriorityBits = ((PriorityGroupTmp + (uint32_t)(__NVIC_PRIO_BITS)) < (uint32_t)7UL) ? (uint32_t)0UL : (uint32_t)((PriorityGroupTmp - 7UL) + (uint32_t)(__NVIC_PRIO_BITS)); - - return ( - ((PreemptPriority & (uint32_t)((1UL << (PreemptPriorityBits)) - 1UL)) << SubPriorityBits) | - ((SubPriority & (uint32_t)((1UL << (SubPriorityBits )) - 1UL))) - ); -} - - -/** - \brief Decode Priority - \details Decodes an interrupt priority value with a given priority group to - preemptive priority value and subpriority value. - In case of a conflict between priority grouping and available - priority bits (__NVIC_PRIO_BITS) the smallest possible priority group is set. - \param [in] Priority Priority value, which can be retrieved with the function \ref NVIC_GetPriority(). - \param [in] PriorityGroup Used priority group. - \param [out] pPreemptPriority Preemptive priority value (starting from 0). - \param [out] pSubPriority Subpriority value (starting from 0). - */ -__STATIC_INLINE void NVIC_DecodePriority (uint32_t Priority, uint32_t PriorityGroup, uint32_t* const pPreemptPriority, uint32_t* const pSubPriority) -{ - uint32_t PriorityGroupTmp = (PriorityGroup & (uint32_t)0x07UL); /* only values 0..7 are used */ - uint32_t PreemptPriorityBits; - uint32_t SubPriorityBits; - - PreemptPriorityBits = ((7UL - PriorityGroupTmp) > (uint32_t)(__NVIC_PRIO_BITS)) ? (uint32_t)(__NVIC_PRIO_BITS) : (uint32_t)(7UL - PriorityGroupTmp); - SubPriorityBits = ((PriorityGroupTmp + (uint32_t)(__NVIC_PRIO_BITS)) < (uint32_t)7UL) ? (uint32_t)0UL : (uint32_t)((PriorityGroupTmp - 7UL) + (uint32_t)(__NVIC_PRIO_BITS)); - - *pPreemptPriority = (Priority >> SubPriorityBits) & (uint32_t)((1UL << (PreemptPriorityBits)) - 1UL); - *pSubPriority = (Priority ) & (uint32_t)((1UL << (SubPriorityBits )) - 1UL); -} - - - -/** - \brief Set Interrupt Vector - \details Sets an interrupt vector in SRAM based interrupt vector table. - The interrupt number can be positive to specify a device specific interrupt, - or negative to specify a processor exception. - Address 0 must be mapped to SRAM. - \param [in] IRQn Interrupt number - \param [in] vector Address of interrupt handler function - */ -__STATIC_INLINE void __NVIC_SetVector(IRQn_Type IRQn, uint32_t vector) -{ - uint32_t *vectors = (uint32_t *)0x0U; - vectors[(int32_t)IRQn + NVIC_USER_IRQ_OFFSET] = vector; -} - - -/** - \brief Get Interrupt Vector - \details Reads an interrupt vector from interrupt vector table. - The interrupt number can be positive to specify a device specific interrupt, - or negative to specify a processor exception. - \param [in] IRQn Interrupt number. - \return Address of interrupt handler function - */ -__STATIC_INLINE uint32_t __NVIC_GetVector(IRQn_Type IRQn) -{ - uint32_t *vectors = (uint32_t *)0x0U; - return vectors[(int32_t)IRQn + NVIC_USER_IRQ_OFFSET]; -} - - -/** - \brief System Reset - \details Initiates a system reset request to reset the MCU. - */ -__NO_RETURN __STATIC_INLINE void __NVIC_SystemReset(void) -{ - __DSB(); /* Ensure all outstanding memory accesses included - buffered write are completed before reset */ - SCB->AIRCR = ((0x5FAUL << SCB_AIRCR_VECTKEY_Pos) | - SCB_AIRCR_SYSRESETREQ_Msk); - __DSB(); /* Ensure completion of memory access */ - - for(;;) /* wait until reset */ - { - __NOP(); - } -} - -/*@} end of CMSIS_Core_NVICFunctions */ - - -/* ########################## FPU functions #################################### */ -/** - \ingroup CMSIS_Core_FunctionInterface - \defgroup CMSIS_Core_FpuFunctions FPU Functions - \brief Function that provides FPU type. - @{ - */ - -/** - \brief get FPU type - \details returns the FPU type - \returns - - \b 0: No FPU - - \b 1: Single precision FPU - - \b 2: Double + Single precision FPU - */ -__STATIC_INLINE uint32_t SCB_GetFPUType(void) -{ - return 0U; /* No FPU */ -} - - -/*@} end of CMSIS_Core_FpuFunctions */ - - - -/* ################################## SysTick function ############################################ */ -/** - \ingroup CMSIS_Core_FunctionInterface - \defgroup CMSIS_Core_SysTickFunctions SysTick Functions - \brief Functions that configure the System. - @{ - */ - -#if defined (__Vendor_SysTickConfig) && (__Vendor_SysTickConfig == 0U) - -/** - \brief System Tick Configuration - \details Initializes the System Timer and its interrupt, and starts the System Tick Timer. - Counter is in free running mode to generate periodic interrupts. - \param [in] ticks Number of ticks between two interrupts. - \return 0 Function succeeded. - \return 1 Function failed. - \note When the variable __Vendor_SysTickConfig is set to 1, then the - function SysTick_Config is not included. In this case, the file device.h - must contain a vendor-specific implementation of this function. - */ -__STATIC_INLINE uint32_t SysTick_Config(uint32_t ticks) -{ - if ((ticks - 1UL) > SysTick_LOAD_RELOAD_Msk) - { - return (1UL); /* Reload value impossible */ - } - - SysTick->LOAD = (uint32_t)(ticks - 1UL); /* set reload register */ - NVIC_SetPriority (SysTick_IRQn, (1UL << __NVIC_PRIO_BITS) - 1UL); /* set Priority for Systick Interrupt */ - SysTick->VAL = 0UL; /* Load the SysTick Counter Value */ - SysTick->CTRL = SysTick_CTRL_CLKSOURCE_Msk | - SysTick_CTRL_TICKINT_Msk | - SysTick_CTRL_ENABLE_Msk; /* Enable SysTick IRQ and SysTick Timer */ - return (0UL); /* Function successful */ -} - -#endif - -/*@} end of CMSIS_Core_SysTickFunctions */ - - - - -#ifdef __cplusplus -} -#endif - -#endif /* __CORE_CM1_H_DEPENDANT */ - -#endif /* __CMSIS_GENERIC */ diff --git a/test_dma/Drivers/CMSIS/Include/core_cm23.h b/test_dma/Drivers/CMSIS/Include/core_cm23.h deleted file mode 100644 index 8202a8d..0000000 --- a/test_dma/Drivers/CMSIS/Include/core_cm23.h +++ /dev/null @@ -1,1993 +0,0 @@ -/**************************************************************************//** - * @file core_cm23.h - * @brief CMSIS Cortex-M23 Core Peripheral Access Layer Header File - * @version V5.0.7 - * @date 22. June 2018 - ******************************************************************************/ -/* - * Copyright (c) 2009-2018 Arm Limited. All rights reserved. - * - * SPDX-License-Identifier: Apache-2.0 - * - * Licensed under the Apache License, Version 2.0 (the License); you may - * not use this file except in compliance with the License. - * You may obtain a copy of the License at - * - * www.apache.org/licenses/LICENSE-2.0 - * - * Unless required by applicable law or agreed to in writing, software - * distributed under the License is distributed on an AS IS BASIS, WITHOUT - * WARRANTIES OR CONDITIONS OF ANY KIND, either express or implied. - * See the License for the specific language governing permissions and - * limitations under the License. - */ - -#if defined ( __ICCARM__ ) - #pragma system_include /* treat file as system include file for MISRA check */ -#elif defined (__clang__) - #pragma clang system_header /* treat file as system include file */ -#endif - -#ifndef __CORE_CM23_H_GENERIC -#define __CORE_CM23_H_GENERIC - -#include - -#ifdef __cplusplus - extern "C" { -#endif - -/** - \page CMSIS_MISRA_Exceptions MISRA-C:2004 Compliance Exceptions - CMSIS violates the following MISRA-C:2004 rules: - - \li Required Rule 8.5, object/function definition in header file.
- Function definitions in header files are used to allow 'inlining'. - - \li Required Rule 18.4, declaration of union type or object of union type: '{...}'.
- Unions are used for effective representation of core registers. - - \li Advisory Rule 19.7, Function-like macro defined.
- Function-like macros are used to allow more efficient code. - */ - - -/******************************************************************************* - * CMSIS definitions - ******************************************************************************/ -/** - \ingroup Cortex_M23 - @{ - */ - -#include "cmsis_version.h" - -/* CMSIS definitions */ -#define __CM23_CMSIS_VERSION_MAIN (__CM_CMSIS_VERSION_MAIN) /*!< \deprecated [31:16] CMSIS HAL main version */ -#define __CM23_CMSIS_VERSION_SUB (__CM_CMSIS_VERSION_SUB) /*!< \deprecated [15:0] CMSIS HAL sub version */ -#define __CM23_CMSIS_VERSION ((__CM23_CMSIS_VERSION_MAIN << 16U) | \ - __CM23_CMSIS_VERSION_SUB ) /*!< \deprecated CMSIS HAL version number */ - -#define __CORTEX_M (23U) /*!< Cortex-M Core */ - -/** __FPU_USED indicates whether an FPU is used or not. - This core does not support an FPU at all -*/ -#define __FPU_USED 0U - -#if defined ( __CC_ARM ) - #if defined __TARGET_FPU_VFP - #error "Compiler generates FPU instructions for a device without an FPU (check __FPU_PRESENT)" - #endif - -#elif defined (__ARMCC_VERSION) && (__ARMCC_VERSION >= 6010050) - #if defined __ARM_PCS_VFP - #error "Compiler generates FPU instructions for a device without an FPU (check __FPU_PRESENT)" - #endif - -#elif defined ( __GNUC__ ) - #if defined (__VFP_FP__) && !defined(__SOFTFP__) - #error "Compiler generates FPU instructions for a device without an FPU (check __FPU_PRESENT)" - #endif - -#elif defined ( __ICCARM__ ) - #if defined __ARMVFP__ - #error "Compiler generates FPU instructions for a device without an FPU (check __FPU_PRESENT)" - #endif - -#elif defined ( __TI_ARM__ ) - #if defined __TI_VFP_SUPPORT__ - #error "Compiler generates FPU instructions for a device without an FPU (check __FPU_PRESENT)" - #endif - -#elif defined ( __TASKING__ ) - #if defined __FPU_VFP__ - #error "Compiler generates FPU instructions for a device without an FPU (check __FPU_PRESENT)" - #endif - -#elif defined ( __CSMC__ ) - #if ( __CSMC__ & 0x400U) - #error "Compiler generates FPU instructions for a device without an FPU (check __FPU_PRESENT)" - #endif - -#endif - -#include "cmsis_compiler.h" /* CMSIS compiler specific defines */ - - -#ifdef __cplusplus -} -#endif - -#endif /* __CORE_CM23_H_GENERIC */ - -#ifndef __CMSIS_GENERIC - -#ifndef __CORE_CM23_H_DEPENDANT -#define __CORE_CM23_H_DEPENDANT - -#ifdef __cplusplus - extern "C" { -#endif - -/* check device defines and use defaults */ -#if defined __CHECK_DEVICE_DEFINES - #ifndef __CM23_REV - #define __CM23_REV 0x0000U - #warning "__CM23_REV not defined in device header file; using default!" - #endif - - #ifndef __FPU_PRESENT - #define __FPU_PRESENT 0U - #warning "__FPU_PRESENT not defined in device header file; using default!" - #endif - - #ifndef __MPU_PRESENT - #define __MPU_PRESENT 0U - #warning "__MPU_PRESENT not defined in device header file; using default!" - #endif - - #ifndef __SAUREGION_PRESENT - #define __SAUREGION_PRESENT 0U - #warning "__SAUREGION_PRESENT not defined in device header file; using default!" - #endif - - #ifndef __VTOR_PRESENT - #define __VTOR_PRESENT 0U - #warning "__VTOR_PRESENT not defined in device header file; using default!" - #endif - - #ifndef __NVIC_PRIO_BITS - #define __NVIC_PRIO_BITS 2U - #warning "__NVIC_PRIO_BITS not defined in device header file; using default!" - #endif - - #ifndef __Vendor_SysTickConfig - #define __Vendor_SysTickConfig 0U - #warning "__Vendor_SysTickConfig not defined in device header file; using default!" - #endif - - #ifndef __ETM_PRESENT - #define __ETM_PRESENT 0U - #warning "__ETM_PRESENT not defined in device header file; using default!" - #endif - - #ifndef __MTB_PRESENT - #define __MTB_PRESENT 0U - #warning "__MTB_PRESENT not defined in device header file; using default!" - #endif - -#endif - -/* IO definitions (access restrictions to peripheral registers) */ -/** - \defgroup CMSIS_glob_defs CMSIS Global Defines - - IO Type Qualifiers are used - \li to specify the access to peripheral variables. - \li for automatic generation of peripheral register debug information. -*/ -#ifdef __cplusplus - #define __I volatile /*!< Defines 'read only' permissions */ -#else - #define __I volatile const /*!< Defines 'read only' permissions */ -#endif -#define __O volatile /*!< Defines 'write only' permissions */ -#define __IO volatile /*!< Defines 'read / write' permissions */ - -/* following defines should be used for structure members */ -#define __IM volatile const /*! Defines 'read only' structure member permissions */ -#define __OM volatile /*! Defines 'write only' structure member permissions */ -#define __IOM volatile /*! Defines 'read / write' structure member permissions */ - -/*@} end of group Cortex_M23 */ - - - -/******************************************************************************* - * Register Abstraction - Core Register contain: - - Core Register - - Core NVIC Register - - Core SCB Register - - Core SysTick Register - - Core Debug Register - - Core MPU Register - - Core SAU Register - ******************************************************************************/ -/** - \defgroup CMSIS_core_register Defines and Type Definitions - \brief Type definitions and defines for Cortex-M processor based devices. -*/ - -/** - \ingroup CMSIS_core_register - \defgroup CMSIS_CORE Status and Control Registers - \brief Core Register type definitions. - @{ - */ - -/** - \brief Union type to access the Application Program Status Register (APSR). - */ -typedef union -{ - struct - { - uint32_t _reserved0:28; /*!< bit: 0..27 Reserved */ - uint32_t V:1; /*!< bit: 28 Overflow condition code flag */ - uint32_t C:1; /*!< bit: 29 Carry condition code flag */ - uint32_t Z:1; /*!< bit: 30 Zero condition code flag */ - uint32_t N:1; /*!< bit: 31 Negative condition code flag */ - } b; /*!< Structure used for bit access */ - uint32_t w; /*!< Type used for word access */ -} APSR_Type; - -/* APSR Register Definitions */ -#define APSR_N_Pos 31U /*!< APSR: N Position */ -#define APSR_N_Msk (1UL << APSR_N_Pos) /*!< APSR: N Mask */ - -#define APSR_Z_Pos 30U /*!< APSR: Z Position */ -#define APSR_Z_Msk (1UL << APSR_Z_Pos) /*!< APSR: Z Mask */ - -#define APSR_C_Pos 29U /*!< APSR: C Position */ -#define APSR_C_Msk (1UL << APSR_C_Pos) /*!< APSR: C Mask */ - -#define APSR_V_Pos 28U /*!< APSR: V Position */ -#define APSR_V_Msk (1UL << APSR_V_Pos) /*!< APSR: V Mask */ - - -/** - \brief Union type to access the Interrupt Program Status Register (IPSR). - */ -typedef union -{ - struct - { - uint32_t ISR:9; /*!< bit: 0.. 8 Exception number */ - uint32_t _reserved0:23; /*!< bit: 9..31 Reserved */ - } b; /*!< Structure used for bit access */ - uint32_t w; /*!< Type used for word access */ -} IPSR_Type; - -/* IPSR Register Definitions */ -#define IPSR_ISR_Pos 0U /*!< IPSR: ISR Position */ -#define IPSR_ISR_Msk (0x1FFUL /*<< IPSR_ISR_Pos*/) /*!< IPSR: ISR Mask */ - - -/** - \brief Union type to access the Special-Purpose Program Status Registers (xPSR). - */ -typedef union -{ - struct - { - uint32_t ISR:9; /*!< bit: 0.. 8 Exception number */ - uint32_t _reserved0:15; /*!< bit: 9..23 Reserved */ - uint32_t T:1; /*!< bit: 24 Thumb bit (read 0) */ - uint32_t _reserved1:3; /*!< bit: 25..27 Reserved */ - uint32_t V:1; /*!< bit: 28 Overflow condition code flag */ - uint32_t C:1; /*!< bit: 29 Carry condition code flag */ - uint32_t Z:1; /*!< bit: 30 Zero condition code flag */ - uint32_t N:1; /*!< bit: 31 Negative condition code flag */ - } b; /*!< Structure used for bit access */ - uint32_t w; /*!< Type used for word access */ -} xPSR_Type; - -/* xPSR Register Definitions */ -#define xPSR_N_Pos 31U /*!< xPSR: N Position */ -#define xPSR_N_Msk (1UL << xPSR_N_Pos) /*!< xPSR: N Mask */ - -#define xPSR_Z_Pos 30U /*!< xPSR: Z Position */ -#define xPSR_Z_Msk (1UL << xPSR_Z_Pos) /*!< xPSR: Z Mask */ - -#define xPSR_C_Pos 29U /*!< xPSR: C Position */ -#define xPSR_C_Msk (1UL << xPSR_C_Pos) /*!< xPSR: C Mask */ - -#define xPSR_V_Pos 28U /*!< xPSR: V Position */ -#define xPSR_V_Msk (1UL << xPSR_V_Pos) /*!< xPSR: V Mask */ - -#define xPSR_T_Pos 24U /*!< xPSR: T Position */ -#define xPSR_T_Msk (1UL << xPSR_T_Pos) /*!< xPSR: T Mask */ - -#define xPSR_ISR_Pos 0U /*!< xPSR: ISR Position */ -#define xPSR_ISR_Msk (0x1FFUL /*<< xPSR_ISR_Pos*/) /*!< xPSR: ISR Mask */ - - -/** - \brief Union type to access the Control Registers (CONTROL). - */ -typedef union -{ - struct - { - uint32_t nPRIV:1; /*!< bit: 0 Execution privilege in Thread mode */ - uint32_t SPSEL:1; /*!< bit: 1 Stack-pointer select */ - uint32_t _reserved1:30; /*!< bit: 2..31 Reserved */ - } b; /*!< Structure used for bit access */ - uint32_t w; /*!< Type used for word access */ -} CONTROL_Type; - -/* CONTROL Register Definitions */ -#define CONTROL_SPSEL_Pos 1U /*!< CONTROL: SPSEL Position */ -#define CONTROL_SPSEL_Msk (1UL << CONTROL_SPSEL_Pos) /*!< CONTROL: SPSEL Mask */ - -#define CONTROL_nPRIV_Pos 0U /*!< CONTROL: nPRIV Position */ -#define CONTROL_nPRIV_Msk (1UL /*<< CONTROL_nPRIV_Pos*/) /*!< CONTROL: nPRIV Mask */ - -/*@} end of group CMSIS_CORE */ - - -/** - \ingroup CMSIS_core_register - \defgroup CMSIS_NVIC Nested Vectored Interrupt Controller (NVIC) - \brief Type definitions for the NVIC Registers - @{ - */ - -/** - \brief Structure type to access the Nested Vectored Interrupt Controller (NVIC). - */ -typedef struct -{ - __IOM uint32_t ISER[16U]; /*!< Offset: 0x000 (R/W) Interrupt Set Enable Register */ - uint32_t RESERVED0[16U]; - __IOM uint32_t ICER[16U]; /*!< Offset: 0x080 (R/W) Interrupt Clear Enable Register */ - uint32_t RSERVED1[16U]; - __IOM uint32_t ISPR[16U]; /*!< Offset: 0x100 (R/W) Interrupt Set Pending Register */ - uint32_t RESERVED2[16U]; - __IOM uint32_t ICPR[16U]; /*!< Offset: 0x180 (R/W) Interrupt Clear Pending Register */ - uint32_t RESERVED3[16U]; - __IOM uint32_t IABR[16U]; /*!< Offset: 0x200 (R/W) Interrupt Active bit Register */ - uint32_t RESERVED4[16U]; - __IOM uint32_t ITNS[16U]; /*!< Offset: 0x280 (R/W) Interrupt Non-Secure State Register */ - uint32_t RESERVED5[16U]; - __IOM uint32_t IPR[124U]; /*!< Offset: 0x300 (R/W) Interrupt Priority Register */ -} NVIC_Type; - -/*@} end of group CMSIS_NVIC */ - - -/** - \ingroup CMSIS_core_register - \defgroup CMSIS_SCB System Control Block (SCB) - \brief Type definitions for the System Control Block Registers - @{ - */ - -/** - \brief Structure type to access the System Control Block (SCB). - */ -typedef struct -{ - __IM uint32_t CPUID; /*!< Offset: 0x000 (R/ ) CPUID Base Register */ - __IOM uint32_t ICSR; /*!< Offset: 0x004 (R/W) Interrupt Control and State Register */ -#if defined (__VTOR_PRESENT) && (__VTOR_PRESENT == 1U) - __IOM uint32_t VTOR; /*!< Offset: 0x008 (R/W) Vector Table Offset Register */ -#else - uint32_t RESERVED0; -#endif - __IOM uint32_t AIRCR; /*!< Offset: 0x00C (R/W) Application Interrupt and Reset Control Register */ - __IOM uint32_t SCR; /*!< Offset: 0x010 (R/W) System Control Register */ - __IOM uint32_t CCR; /*!< Offset: 0x014 (R/W) Configuration Control Register */ - uint32_t RESERVED1; - __IOM uint32_t SHPR[2U]; /*!< Offset: 0x01C (R/W) System Handlers Priority Registers. [0] is RESERVED */ - __IOM uint32_t SHCSR; /*!< Offset: 0x024 (R/W) System Handler Control and State Register */ -} SCB_Type; - -/* SCB CPUID Register Definitions */ -#define SCB_CPUID_IMPLEMENTER_Pos 24U /*!< SCB CPUID: IMPLEMENTER Position */ -#define SCB_CPUID_IMPLEMENTER_Msk (0xFFUL << SCB_CPUID_IMPLEMENTER_Pos) /*!< SCB CPUID: IMPLEMENTER Mask */ - -#define SCB_CPUID_VARIANT_Pos 20U /*!< SCB CPUID: VARIANT Position */ -#define SCB_CPUID_VARIANT_Msk (0xFUL << SCB_CPUID_VARIANT_Pos) /*!< SCB CPUID: VARIANT Mask */ - -#define SCB_CPUID_ARCHITECTURE_Pos 16U /*!< SCB CPUID: ARCHITECTURE Position */ -#define SCB_CPUID_ARCHITECTURE_Msk (0xFUL << SCB_CPUID_ARCHITECTURE_Pos) /*!< SCB CPUID: ARCHITECTURE Mask */ - -#define SCB_CPUID_PARTNO_Pos 4U /*!< SCB CPUID: PARTNO Position */ -#define SCB_CPUID_PARTNO_Msk (0xFFFUL << SCB_CPUID_PARTNO_Pos) /*!< SCB CPUID: PARTNO Mask */ - -#define SCB_CPUID_REVISION_Pos 0U /*!< SCB CPUID: REVISION Position */ -#define SCB_CPUID_REVISION_Msk (0xFUL /*<< SCB_CPUID_REVISION_Pos*/) /*!< SCB CPUID: REVISION Mask */ - -/* SCB Interrupt Control State Register Definitions */ -#define SCB_ICSR_PENDNMISET_Pos 31U /*!< SCB ICSR: PENDNMISET Position */ -#define SCB_ICSR_PENDNMISET_Msk (1UL << SCB_ICSR_PENDNMISET_Pos) /*!< SCB ICSR: PENDNMISET Mask */ - -#define SCB_ICSR_NMIPENDSET_Pos SCB_ICSR_PENDNMISET_Pos /*!< SCB ICSR: NMIPENDSET Position, backward compatibility */ -#define SCB_ICSR_NMIPENDSET_Msk SCB_ICSR_PENDNMISET_Msk /*!< SCB ICSR: NMIPENDSET Mask, backward compatibility */ - -#define SCB_ICSR_PENDNMICLR_Pos 30U /*!< SCB ICSR: PENDNMICLR Position */ -#define SCB_ICSR_PENDNMICLR_Msk (1UL << SCB_ICSR_PENDNMICLR_Pos) /*!< SCB ICSR: PENDNMICLR Mask */ - -#define SCB_ICSR_PENDSVSET_Pos 28U /*!< SCB ICSR: PENDSVSET Position */ -#define SCB_ICSR_PENDSVSET_Msk (1UL << SCB_ICSR_PENDSVSET_Pos) /*!< SCB ICSR: PENDSVSET Mask */ - -#define SCB_ICSR_PENDSVCLR_Pos 27U /*!< SCB ICSR: PENDSVCLR Position */ -#define SCB_ICSR_PENDSVCLR_Msk (1UL << SCB_ICSR_PENDSVCLR_Pos) /*!< SCB ICSR: PENDSVCLR Mask */ - -#define SCB_ICSR_PENDSTSET_Pos 26U /*!< SCB ICSR: PENDSTSET Position */ -#define SCB_ICSR_PENDSTSET_Msk (1UL << SCB_ICSR_PENDSTSET_Pos) /*!< SCB ICSR: PENDSTSET Mask */ - -#define SCB_ICSR_PENDSTCLR_Pos 25U /*!< SCB ICSR: PENDSTCLR Position */ -#define SCB_ICSR_PENDSTCLR_Msk (1UL << SCB_ICSR_PENDSTCLR_Pos) /*!< SCB ICSR: PENDSTCLR Mask */ - -#define SCB_ICSR_STTNS_Pos 24U /*!< SCB ICSR: STTNS Position (Security Extension) */ -#define SCB_ICSR_STTNS_Msk (1UL << SCB_ICSR_STTNS_Pos) /*!< SCB ICSR: STTNS Mask (Security Extension) */ - -#define SCB_ICSR_ISRPREEMPT_Pos 23U /*!< SCB ICSR: ISRPREEMPT Position */ -#define SCB_ICSR_ISRPREEMPT_Msk (1UL << SCB_ICSR_ISRPREEMPT_Pos) /*!< SCB ICSR: ISRPREEMPT Mask */ - -#define SCB_ICSR_ISRPENDING_Pos 22U /*!< SCB ICSR: ISRPENDING Position */ -#define SCB_ICSR_ISRPENDING_Msk (1UL << SCB_ICSR_ISRPENDING_Pos) /*!< SCB ICSR: ISRPENDING Mask */ - -#define SCB_ICSR_VECTPENDING_Pos 12U /*!< SCB ICSR: VECTPENDING Position */ -#define SCB_ICSR_VECTPENDING_Msk (0x1FFUL << SCB_ICSR_VECTPENDING_Pos) /*!< SCB ICSR: VECTPENDING Mask */ - -#define SCB_ICSR_RETTOBASE_Pos 11U /*!< SCB ICSR: RETTOBASE Position */ -#define SCB_ICSR_RETTOBASE_Msk (1UL << SCB_ICSR_RETTOBASE_Pos) /*!< SCB ICSR: RETTOBASE Mask */ - -#define SCB_ICSR_VECTACTIVE_Pos 0U /*!< SCB ICSR: VECTACTIVE Position */ -#define SCB_ICSR_VECTACTIVE_Msk (0x1FFUL /*<< SCB_ICSR_VECTACTIVE_Pos*/) /*!< SCB ICSR: VECTACTIVE Mask */ - -#if defined (__VTOR_PRESENT) && (__VTOR_PRESENT == 1U) -/* SCB Vector Table Offset Register Definitions */ -#define SCB_VTOR_TBLOFF_Pos 7U /*!< SCB VTOR: TBLOFF Position */ -#define SCB_VTOR_TBLOFF_Msk (0x1FFFFFFUL << SCB_VTOR_TBLOFF_Pos) /*!< SCB VTOR: TBLOFF Mask */ -#endif - -/* SCB Application Interrupt and Reset Control Register Definitions */ -#define SCB_AIRCR_VECTKEY_Pos 16U /*!< SCB AIRCR: VECTKEY Position */ -#define SCB_AIRCR_VECTKEY_Msk (0xFFFFUL << SCB_AIRCR_VECTKEY_Pos) /*!< SCB AIRCR: VECTKEY Mask */ - -#define SCB_AIRCR_VECTKEYSTAT_Pos 16U /*!< SCB AIRCR: VECTKEYSTAT Position */ -#define SCB_AIRCR_VECTKEYSTAT_Msk (0xFFFFUL << SCB_AIRCR_VECTKEYSTAT_Pos) /*!< SCB AIRCR: VECTKEYSTAT Mask */ - -#define SCB_AIRCR_ENDIANESS_Pos 15U /*!< SCB AIRCR: ENDIANESS Position */ -#define SCB_AIRCR_ENDIANESS_Msk (1UL << SCB_AIRCR_ENDIANESS_Pos) /*!< SCB AIRCR: ENDIANESS Mask */ - -#define SCB_AIRCR_PRIS_Pos 14U /*!< SCB AIRCR: PRIS Position */ -#define SCB_AIRCR_PRIS_Msk (1UL << SCB_AIRCR_PRIS_Pos) /*!< SCB AIRCR: PRIS Mask */ - -#define SCB_AIRCR_BFHFNMINS_Pos 13U /*!< SCB AIRCR: BFHFNMINS Position */ -#define SCB_AIRCR_BFHFNMINS_Msk (1UL << SCB_AIRCR_BFHFNMINS_Pos) /*!< SCB AIRCR: BFHFNMINS Mask */ - -#define SCB_AIRCR_SYSRESETREQS_Pos 3U /*!< SCB AIRCR: SYSRESETREQS Position */ -#define SCB_AIRCR_SYSRESETREQS_Msk (1UL << SCB_AIRCR_SYSRESETREQS_Pos) /*!< SCB AIRCR: SYSRESETREQS Mask */ - -#define SCB_AIRCR_SYSRESETREQ_Pos 2U /*!< SCB AIRCR: SYSRESETREQ Position */ -#define SCB_AIRCR_SYSRESETREQ_Msk (1UL << SCB_AIRCR_SYSRESETREQ_Pos) /*!< SCB AIRCR: SYSRESETREQ Mask */ - -#define SCB_AIRCR_VECTCLRACTIVE_Pos 1U /*!< SCB AIRCR: VECTCLRACTIVE Position */ -#define SCB_AIRCR_VECTCLRACTIVE_Msk (1UL << SCB_AIRCR_VECTCLRACTIVE_Pos) /*!< SCB AIRCR: VECTCLRACTIVE Mask */ - -/* SCB System Control Register Definitions */ -#define SCB_SCR_SEVONPEND_Pos 4U /*!< SCB SCR: SEVONPEND Position */ -#define SCB_SCR_SEVONPEND_Msk (1UL << SCB_SCR_SEVONPEND_Pos) /*!< SCB SCR: SEVONPEND Mask */ - -#define SCB_SCR_SLEEPDEEPS_Pos 3U /*!< SCB SCR: SLEEPDEEPS Position */ -#define SCB_SCR_SLEEPDEEPS_Msk (1UL << SCB_SCR_SLEEPDEEPS_Pos) /*!< SCB SCR: SLEEPDEEPS Mask */ - -#define SCB_SCR_SLEEPDEEP_Pos 2U /*!< SCB SCR: SLEEPDEEP Position */ -#define SCB_SCR_SLEEPDEEP_Msk (1UL << SCB_SCR_SLEEPDEEP_Pos) /*!< SCB SCR: SLEEPDEEP Mask */ - -#define SCB_SCR_SLEEPONEXIT_Pos 1U /*!< SCB SCR: SLEEPONEXIT Position */ -#define SCB_SCR_SLEEPONEXIT_Msk (1UL << SCB_SCR_SLEEPONEXIT_Pos) /*!< SCB SCR: SLEEPONEXIT Mask */ - -/* SCB Configuration Control Register Definitions */ -#define SCB_CCR_BP_Pos 18U /*!< SCB CCR: BP Position */ -#define SCB_CCR_BP_Msk (1UL << SCB_CCR_BP_Pos) /*!< SCB CCR: BP Mask */ - -#define SCB_CCR_IC_Pos 17U /*!< SCB CCR: IC Position */ -#define SCB_CCR_IC_Msk (1UL << SCB_CCR_IC_Pos) /*!< SCB CCR: IC Mask */ - -#define SCB_CCR_DC_Pos 16U /*!< SCB CCR: DC Position */ -#define SCB_CCR_DC_Msk (1UL << SCB_CCR_DC_Pos) /*!< SCB CCR: DC Mask */ - -#define SCB_CCR_STKOFHFNMIGN_Pos 10U /*!< SCB CCR: STKOFHFNMIGN Position */ -#define SCB_CCR_STKOFHFNMIGN_Msk (1UL << SCB_CCR_STKOFHFNMIGN_Pos) /*!< SCB CCR: STKOFHFNMIGN Mask */ - -#define SCB_CCR_BFHFNMIGN_Pos 8U /*!< SCB CCR: BFHFNMIGN Position */ -#define SCB_CCR_BFHFNMIGN_Msk (1UL << SCB_CCR_BFHFNMIGN_Pos) /*!< SCB CCR: BFHFNMIGN Mask */ - -#define SCB_CCR_DIV_0_TRP_Pos 4U /*!< SCB CCR: DIV_0_TRP Position */ -#define SCB_CCR_DIV_0_TRP_Msk (1UL << SCB_CCR_DIV_0_TRP_Pos) /*!< SCB CCR: DIV_0_TRP Mask */ - -#define SCB_CCR_UNALIGN_TRP_Pos 3U /*!< SCB CCR: UNALIGN_TRP Position */ -#define SCB_CCR_UNALIGN_TRP_Msk (1UL << SCB_CCR_UNALIGN_TRP_Pos) /*!< SCB CCR: UNALIGN_TRP Mask */ - -#define SCB_CCR_USERSETMPEND_Pos 1U /*!< SCB CCR: USERSETMPEND Position */ -#define SCB_CCR_USERSETMPEND_Msk (1UL << SCB_CCR_USERSETMPEND_Pos) /*!< SCB CCR: USERSETMPEND Mask */ - -/* SCB System Handler Control and State Register Definitions */ -#define SCB_SHCSR_HARDFAULTPENDED_Pos 21U /*!< SCB SHCSR: HARDFAULTPENDED Position */ -#define SCB_SHCSR_HARDFAULTPENDED_Msk (1UL << SCB_SHCSR_HARDFAULTPENDED_Pos) /*!< SCB SHCSR: HARDFAULTPENDED Mask */ - -#define SCB_SHCSR_SVCALLPENDED_Pos 15U /*!< SCB SHCSR: SVCALLPENDED Position */ -#define SCB_SHCSR_SVCALLPENDED_Msk (1UL << SCB_SHCSR_SVCALLPENDED_Pos) /*!< SCB SHCSR: SVCALLPENDED Mask */ - -#define SCB_SHCSR_SYSTICKACT_Pos 11U /*!< SCB SHCSR: SYSTICKACT Position */ -#define SCB_SHCSR_SYSTICKACT_Msk (1UL << SCB_SHCSR_SYSTICKACT_Pos) /*!< SCB SHCSR: SYSTICKACT Mask */ - -#define SCB_SHCSR_PENDSVACT_Pos 10U /*!< SCB SHCSR: PENDSVACT Position */ -#define SCB_SHCSR_PENDSVACT_Msk (1UL << SCB_SHCSR_PENDSVACT_Pos) /*!< SCB SHCSR: PENDSVACT Mask */ - -#define SCB_SHCSR_SVCALLACT_Pos 7U /*!< SCB SHCSR: SVCALLACT Position */ -#define SCB_SHCSR_SVCALLACT_Msk (1UL << SCB_SHCSR_SVCALLACT_Pos) /*!< SCB SHCSR: SVCALLACT Mask */ - -#define SCB_SHCSR_NMIACT_Pos 5U /*!< SCB SHCSR: NMIACT Position */ -#define SCB_SHCSR_NMIACT_Msk (1UL << SCB_SHCSR_NMIACT_Pos) /*!< SCB SHCSR: NMIACT Mask */ - -#define SCB_SHCSR_HARDFAULTACT_Pos 2U /*!< SCB SHCSR: HARDFAULTACT Position */ -#define SCB_SHCSR_HARDFAULTACT_Msk (1UL << SCB_SHCSR_HARDFAULTACT_Pos) /*!< SCB SHCSR: HARDFAULTACT Mask */ - -/*@} end of group CMSIS_SCB */ - - -/** - \ingroup CMSIS_core_register - \defgroup CMSIS_SysTick System Tick Timer (SysTick) - \brief Type definitions for the System Timer Registers. - @{ - */ - -/** - \brief Structure type to access the System Timer (SysTick). - */ -typedef struct -{ - __IOM uint32_t CTRL; /*!< Offset: 0x000 (R/W) SysTick Control and Status Register */ - __IOM uint32_t LOAD; /*!< Offset: 0x004 (R/W) SysTick Reload Value Register */ - __IOM uint32_t VAL; /*!< Offset: 0x008 (R/W) SysTick Current Value Register */ - __IM uint32_t CALIB; /*!< Offset: 0x00C (R/ ) SysTick Calibration Register */ -} SysTick_Type; - -/* SysTick Control / Status Register Definitions */ -#define SysTick_CTRL_COUNTFLAG_Pos 16U /*!< SysTick CTRL: COUNTFLAG Position */ -#define SysTick_CTRL_COUNTFLAG_Msk (1UL << SysTick_CTRL_COUNTFLAG_Pos) /*!< SysTick CTRL: COUNTFLAG Mask */ - -#define SysTick_CTRL_CLKSOURCE_Pos 2U /*!< SysTick CTRL: CLKSOURCE Position */ -#define SysTick_CTRL_CLKSOURCE_Msk (1UL << SysTick_CTRL_CLKSOURCE_Pos) /*!< SysTick CTRL: CLKSOURCE Mask */ - -#define SysTick_CTRL_TICKINT_Pos 1U /*!< SysTick CTRL: TICKINT Position */ -#define SysTick_CTRL_TICKINT_Msk (1UL << SysTick_CTRL_TICKINT_Pos) /*!< SysTick CTRL: TICKINT Mask */ - -#define SysTick_CTRL_ENABLE_Pos 0U /*!< SysTick CTRL: ENABLE Position */ -#define SysTick_CTRL_ENABLE_Msk (1UL /*<< SysTick_CTRL_ENABLE_Pos*/) /*!< SysTick CTRL: ENABLE Mask */ - -/* SysTick Reload Register Definitions */ -#define SysTick_LOAD_RELOAD_Pos 0U /*!< SysTick LOAD: RELOAD Position */ -#define SysTick_LOAD_RELOAD_Msk (0xFFFFFFUL /*<< SysTick_LOAD_RELOAD_Pos*/) /*!< SysTick LOAD: RELOAD Mask */ - -/* SysTick Current Register Definitions */ -#define SysTick_VAL_CURRENT_Pos 0U /*!< SysTick VAL: CURRENT Position */ -#define SysTick_VAL_CURRENT_Msk (0xFFFFFFUL /*<< SysTick_VAL_CURRENT_Pos*/) /*!< SysTick VAL: CURRENT Mask */ - -/* SysTick Calibration Register Definitions */ -#define SysTick_CALIB_NOREF_Pos 31U /*!< SysTick CALIB: NOREF Position */ -#define SysTick_CALIB_NOREF_Msk (1UL << SysTick_CALIB_NOREF_Pos) /*!< SysTick CALIB: NOREF Mask */ - -#define SysTick_CALIB_SKEW_Pos 30U /*!< SysTick CALIB: SKEW Position */ -#define SysTick_CALIB_SKEW_Msk (1UL << SysTick_CALIB_SKEW_Pos) /*!< SysTick CALIB: SKEW Mask */ - -#define SysTick_CALIB_TENMS_Pos 0U /*!< SysTick CALIB: TENMS Position */ -#define SysTick_CALIB_TENMS_Msk (0xFFFFFFUL /*<< SysTick_CALIB_TENMS_Pos*/) /*!< SysTick CALIB: TENMS Mask */ - -/*@} end of group CMSIS_SysTick */ - - -/** - \ingroup CMSIS_core_register - \defgroup CMSIS_DWT Data Watchpoint and Trace (DWT) - \brief Type definitions for the Data Watchpoint and Trace (DWT) - @{ - */ - -/** - \brief Structure type to access the Data Watchpoint and Trace Register (DWT). - */ -typedef struct -{ - __IOM uint32_t CTRL; /*!< Offset: 0x000 (R/W) Control Register */ - uint32_t RESERVED0[6U]; - __IM uint32_t PCSR; /*!< Offset: 0x01C (R/ ) Program Counter Sample Register */ - __IOM uint32_t COMP0; /*!< Offset: 0x020 (R/W) Comparator Register 0 */ - uint32_t RESERVED1[1U]; - __IOM uint32_t FUNCTION0; /*!< Offset: 0x028 (R/W) Function Register 0 */ - uint32_t RESERVED2[1U]; - __IOM uint32_t COMP1; /*!< Offset: 0x030 (R/W) Comparator Register 1 */ - uint32_t RESERVED3[1U]; - __IOM uint32_t FUNCTION1; /*!< Offset: 0x038 (R/W) Function Register 1 */ - uint32_t RESERVED4[1U]; - __IOM uint32_t COMP2; /*!< Offset: 0x040 (R/W) Comparator Register 2 */ - uint32_t RESERVED5[1U]; - __IOM uint32_t FUNCTION2; /*!< Offset: 0x048 (R/W) Function Register 2 */ - uint32_t RESERVED6[1U]; - __IOM uint32_t COMP3; /*!< Offset: 0x050 (R/W) Comparator Register 3 */ - uint32_t RESERVED7[1U]; - __IOM uint32_t FUNCTION3; /*!< Offset: 0x058 (R/W) Function Register 3 */ - uint32_t RESERVED8[1U]; - __IOM uint32_t COMP4; /*!< Offset: 0x060 (R/W) Comparator Register 4 */ - uint32_t RESERVED9[1U]; - __IOM uint32_t FUNCTION4; /*!< Offset: 0x068 (R/W) Function Register 4 */ - uint32_t RESERVED10[1U]; - __IOM uint32_t COMP5; /*!< Offset: 0x070 (R/W) Comparator Register 5 */ - uint32_t RESERVED11[1U]; - __IOM uint32_t FUNCTION5; /*!< Offset: 0x078 (R/W) Function Register 5 */ - uint32_t RESERVED12[1U]; - __IOM uint32_t COMP6; /*!< Offset: 0x080 (R/W) Comparator Register 6 */ - uint32_t RESERVED13[1U]; - __IOM uint32_t FUNCTION6; /*!< Offset: 0x088 (R/W) Function Register 6 */ - uint32_t RESERVED14[1U]; - __IOM uint32_t COMP7; /*!< Offset: 0x090 (R/W) Comparator Register 7 */ - uint32_t RESERVED15[1U]; - __IOM uint32_t FUNCTION7; /*!< Offset: 0x098 (R/W) Function Register 7 */ - uint32_t RESERVED16[1U]; - __IOM uint32_t COMP8; /*!< Offset: 0x0A0 (R/W) Comparator Register 8 */ - uint32_t RESERVED17[1U]; - __IOM uint32_t FUNCTION8; /*!< Offset: 0x0A8 (R/W) Function Register 8 */ - uint32_t RESERVED18[1U]; - __IOM uint32_t COMP9; /*!< Offset: 0x0B0 (R/W) Comparator Register 9 */ - uint32_t RESERVED19[1U]; - __IOM uint32_t FUNCTION9; /*!< Offset: 0x0B8 (R/W) Function Register 9 */ - uint32_t RESERVED20[1U]; - __IOM uint32_t COMP10; /*!< Offset: 0x0C0 (R/W) Comparator Register 10 */ - uint32_t RESERVED21[1U]; - __IOM uint32_t FUNCTION10; /*!< Offset: 0x0C8 (R/W) Function Register 10 */ - uint32_t RESERVED22[1U]; - __IOM uint32_t COMP11; /*!< Offset: 0x0D0 (R/W) Comparator Register 11 */ - uint32_t RESERVED23[1U]; - __IOM uint32_t FUNCTION11; /*!< Offset: 0x0D8 (R/W) Function Register 11 */ - uint32_t RESERVED24[1U]; - __IOM uint32_t COMP12; /*!< Offset: 0x0E0 (R/W) Comparator Register 12 */ - uint32_t RESERVED25[1U]; - __IOM uint32_t FUNCTION12; /*!< Offset: 0x0E8 (R/W) Function Register 12 */ - uint32_t RESERVED26[1U]; - __IOM uint32_t COMP13; /*!< Offset: 0x0F0 (R/W) Comparator Register 13 */ - uint32_t RESERVED27[1U]; - __IOM uint32_t FUNCTION13; /*!< Offset: 0x0F8 (R/W) Function Register 13 */ - uint32_t RESERVED28[1U]; - __IOM uint32_t COMP14; /*!< Offset: 0x100 (R/W) Comparator Register 14 */ - uint32_t RESERVED29[1U]; - __IOM uint32_t FUNCTION14; /*!< Offset: 0x108 (R/W) Function Register 14 */ - uint32_t RESERVED30[1U]; - __IOM uint32_t COMP15; /*!< Offset: 0x110 (R/W) Comparator Register 15 */ - uint32_t RESERVED31[1U]; - __IOM uint32_t FUNCTION15; /*!< Offset: 0x118 (R/W) Function Register 15 */ -} DWT_Type; - -/* DWT Control Register Definitions */ -#define DWT_CTRL_NUMCOMP_Pos 28U /*!< DWT CTRL: NUMCOMP Position */ -#define DWT_CTRL_NUMCOMP_Msk (0xFUL << DWT_CTRL_NUMCOMP_Pos) /*!< DWT CTRL: NUMCOMP Mask */ - -#define DWT_CTRL_NOTRCPKT_Pos 27U /*!< DWT CTRL: NOTRCPKT Position */ -#define DWT_CTRL_NOTRCPKT_Msk (0x1UL << DWT_CTRL_NOTRCPKT_Pos) /*!< DWT CTRL: NOTRCPKT Mask */ - -#define DWT_CTRL_NOEXTTRIG_Pos 26U /*!< DWT CTRL: NOEXTTRIG Position */ -#define DWT_CTRL_NOEXTTRIG_Msk (0x1UL << DWT_CTRL_NOEXTTRIG_Pos) /*!< DWT CTRL: NOEXTTRIG Mask */ - -#define DWT_CTRL_NOCYCCNT_Pos 25U /*!< DWT CTRL: NOCYCCNT Position */ -#define DWT_CTRL_NOCYCCNT_Msk (0x1UL << DWT_CTRL_NOCYCCNT_Pos) /*!< DWT CTRL: NOCYCCNT Mask */ - -#define DWT_CTRL_NOPRFCNT_Pos 24U /*!< DWT CTRL: NOPRFCNT Position */ -#define DWT_CTRL_NOPRFCNT_Msk (0x1UL << DWT_CTRL_NOPRFCNT_Pos) /*!< DWT CTRL: NOPRFCNT Mask */ - -/* DWT Comparator Function Register Definitions */ -#define DWT_FUNCTION_ID_Pos 27U /*!< DWT FUNCTION: ID Position */ -#define DWT_FUNCTION_ID_Msk (0x1FUL << DWT_FUNCTION_ID_Pos) /*!< DWT FUNCTION: ID Mask */ - -#define DWT_FUNCTION_MATCHED_Pos 24U /*!< DWT FUNCTION: MATCHED Position */ -#define DWT_FUNCTION_MATCHED_Msk (0x1UL << DWT_FUNCTION_MATCHED_Pos) /*!< DWT FUNCTION: MATCHED Mask */ - -#define DWT_FUNCTION_DATAVSIZE_Pos 10U /*!< DWT FUNCTION: DATAVSIZE Position */ -#define DWT_FUNCTION_DATAVSIZE_Msk (0x3UL << DWT_FUNCTION_DATAVSIZE_Pos) /*!< DWT FUNCTION: DATAVSIZE Mask */ - -#define DWT_FUNCTION_ACTION_Pos 4U /*!< DWT FUNCTION: ACTION Position */ -#define DWT_FUNCTION_ACTION_Msk (0x3UL << DWT_FUNCTION_ACTION_Pos) /*!< DWT FUNCTION: ACTION Mask */ - -#define DWT_FUNCTION_MATCH_Pos 0U /*!< DWT FUNCTION: MATCH Position */ -#define DWT_FUNCTION_MATCH_Msk (0xFUL /*<< DWT_FUNCTION_MATCH_Pos*/) /*!< DWT FUNCTION: MATCH Mask */ - -/*@}*/ /* end of group CMSIS_DWT */ - - -/** - \ingroup CMSIS_core_register - \defgroup CMSIS_TPI Trace Port Interface (TPI) - \brief Type definitions for the Trace Port Interface (TPI) - @{ - */ - -/** - \brief Structure type to access the Trace Port Interface Register (TPI). - */ -typedef struct -{ - __IM uint32_t SSPSR; /*!< Offset: 0x000 (R/ ) Supported Parallel Port Size Register */ - __IOM uint32_t CSPSR; /*!< Offset: 0x004 (R/W) Current Parallel Port Size Register */ - uint32_t RESERVED0[2U]; - __IOM uint32_t ACPR; /*!< Offset: 0x010 (R/W) Asynchronous Clock Prescaler Register */ - uint32_t RESERVED1[55U]; - __IOM uint32_t SPPR; /*!< Offset: 0x0F0 (R/W) Selected Pin Protocol Register */ - uint32_t RESERVED2[131U]; - __IM uint32_t FFSR; /*!< Offset: 0x300 (R/ ) Formatter and Flush Status Register */ - __IOM uint32_t FFCR; /*!< Offset: 0x304 (R/W) Formatter and Flush Control Register */ - __IOM uint32_t PSCR; /*!< Offset: 0x308 (R/W) Periodic Synchronization Control Register */ - uint32_t RESERVED3[759U]; - __IM uint32_t TRIGGER; /*!< Offset: 0xEE8 (R/ ) TRIGGER Register */ - __IM uint32_t ITFTTD0; /*!< Offset: 0xEEC (R/ ) Integration Test FIFO Test Data 0 Register */ - __IOM uint32_t ITATBCTR2; /*!< Offset: 0xEF0 (R/W) Integration Test ATB Control Register 2 */ - uint32_t RESERVED4[1U]; - __IM uint32_t ITATBCTR0; /*!< Offset: 0xEF8 (R/ ) Integration Test ATB Control Register 0 */ - __IM uint32_t ITFTTD1; /*!< Offset: 0xEFC (R/ ) Integration Test FIFO Test Data 1 Register */ - __IOM uint32_t ITCTRL; /*!< Offset: 0xF00 (R/W) Integration Mode Control */ - uint32_t RESERVED5[39U]; - __IOM uint32_t CLAIMSET; /*!< Offset: 0xFA0 (R/W) Claim tag set */ - __IOM uint32_t CLAIMCLR; /*!< Offset: 0xFA4 (R/W) Claim tag clear */ - uint32_t RESERVED7[8U]; - __IM uint32_t DEVID; /*!< Offset: 0xFC8 (R/ ) Device Configuration Register */ - __IM uint32_t DEVTYPE; /*!< Offset: 0xFCC (R/ ) Device Type Identifier Register */ -} TPI_Type; - -/* TPI Asynchronous Clock Prescaler Register Definitions */ -#define TPI_ACPR_PRESCALER_Pos 0U /*!< TPI ACPR: PRESCALER Position */ -#define TPI_ACPR_PRESCALER_Msk (0x1FFFUL /*<< TPI_ACPR_PRESCALER_Pos*/) /*!< TPI ACPR: PRESCALER Mask */ - -/* TPI Selected Pin Protocol Register Definitions */ -#define TPI_SPPR_TXMODE_Pos 0U /*!< TPI SPPR: TXMODE Position */ -#define TPI_SPPR_TXMODE_Msk (0x3UL /*<< TPI_SPPR_TXMODE_Pos*/) /*!< TPI SPPR: TXMODE Mask */ - -/* TPI Formatter and Flush Status Register Definitions */ -#define TPI_FFSR_FtNonStop_Pos 3U /*!< TPI FFSR: FtNonStop Position */ -#define TPI_FFSR_FtNonStop_Msk (0x1UL << TPI_FFSR_FtNonStop_Pos) /*!< TPI FFSR: FtNonStop Mask */ - -#define TPI_FFSR_TCPresent_Pos 2U /*!< TPI FFSR: TCPresent Position */ -#define TPI_FFSR_TCPresent_Msk (0x1UL << TPI_FFSR_TCPresent_Pos) /*!< TPI FFSR: TCPresent Mask */ - -#define TPI_FFSR_FtStopped_Pos 1U /*!< TPI FFSR: FtStopped Position */ -#define TPI_FFSR_FtStopped_Msk (0x1UL << TPI_FFSR_FtStopped_Pos) /*!< TPI FFSR: FtStopped Mask */ - -#define TPI_FFSR_FlInProg_Pos 0U /*!< TPI FFSR: FlInProg Position */ -#define TPI_FFSR_FlInProg_Msk (0x1UL /*<< TPI_FFSR_FlInProg_Pos*/) /*!< TPI FFSR: FlInProg Mask */ - -/* TPI Formatter and Flush Control Register Definitions */ -#define TPI_FFCR_TrigIn_Pos 8U /*!< TPI FFCR: TrigIn Position */ -#define TPI_FFCR_TrigIn_Msk (0x1UL << TPI_FFCR_TrigIn_Pos) /*!< TPI FFCR: TrigIn Mask */ - -#define TPI_FFCR_FOnMan_Pos 6U /*!< TPI FFCR: FOnMan Position */ -#define TPI_FFCR_FOnMan_Msk (0x1UL << TPI_FFCR_FOnMan_Pos) /*!< TPI FFCR: FOnMan Mask */ - -#define TPI_FFCR_EnFCont_Pos 1U /*!< TPI FFCR: EnFCont Position */ -#define TPI_FFCR_EnFCont_Msk (0x1UL << TPI_FFCR_EnFCont_Pos) /*!< TPI FFCR: EnFCont Mask */ - -/* TPI TRIGGER Register Definitions */ -#define TPI_TRIGGER_TRIGGER_Pos 0U /*!< TPI TRIGGER: TRIGGER Position */ -#define TPI_TRIGGER_TRIGGER_Msk (0x1UL /*<< TPI_TRIGGER_TRIGGER_Pos*/) /*!< TPI TRIGGER: TRIGGER Mask */ - -/* TPI Integration Test FIFO Test Data 0 Register Definitions */ -#define TPI_ITFTTD0_ATB_IF2_ATVALID_Pos 29U /*!< TPI ITFTTD0: ATB Interface 2 ATVALIDPosition */ -#define TPI_ITFTTD0_ATB_IF2_ATVALID_Msk (0x3UL << TPI_ITFTTD0_ATB_IF2_ATVALID_Pos) /*!< TPI ITFTTD0: ATB Interface 2 ATVALID Mask */ - -#define TPI_ITFTTD0_ATB_IF2_bytecount_Pos 27U /*!< TPI ITFTTD0: ATB Interface 2 byte count Position */ -#define TPI_ITFTTD0_ATB_IF2_bytecount_Msk (0x3UL << TPI_ITFTTD0_ATB_IF2_bytecount_Pos) /*!< TPI ITFTTD0: ATB Interface 2 byte count Mask */ - -#define TPI_ITFTTD0_ATB_IF1_ATVALID_Pos 26U /*!< TPI ITFTTD0: ATB Interface 1 ATVALID Position */ -#define TPI_ITFTTD0_ATB_IF1_ATVALID_Msk (0x3UL << TPI_ITFTTD0_ATB_IF1_ATVALID_Pos) /*!< TPI ITFTTD0: ATB Interface 1 ATVALID Mask */ - -#define TPI_ITFTTD0_ATB_IF1_bytecount_Pos 24U /*!< TPI ITFTTD0: ATB Interface 1 byte count Position */ -#define TPI_ITFTTD0_ATB_IF1_bytecount_Msk (0x3UL << TPI_ITFTTD0_ATB_IF1_bytecount_Pos) /*!< TPI ITFTTD0: ATB Interface 1 byte countt Mask */ - -#define TPI_ITFTTD0_ATB_IF1_data2_Pos 16U /*!< TPI ITFTTD0: ATB Interface 1 data2 Position */ -#define TPI_ITFTTD0_ATB_IF1_data2_Msk (0xFFUL << TPI_ITFTTD0_ATB_IF1_data1_Pos) /*!< TPI ITFTTD0: ATB Interface 1 data2 Mask */ - -#define TPI_ITFTTD0_ATB_IF1_data1_Pos 8U /*!< TPI ITFTTD0: ATB Interface 1 data1 Position */ -#define TPI_ITFTTD0_ATB_IF1_data1_Msk (0xFFUL << TPI_ITFTTD0_ATB_IF1_data1_Pos) /*!< TPI ITFTTD0: ATB Interface 1 data1 Mask */ - -#define TPI_ITFTTD0_ATB_IF1_data0_Pos 0U /*!< TPI ITFTTD0: ATB Interface 1 data0 Position */ -#define TPI_ITFTTD0_ATB_IF1_data0_Msk (0xFFUL /*<< TPI_ITFTTD0_ATB_IF1_data0_Pos*/) /*!< TPI ITFTTD0: ATB Interface 1 data0 Mask */ - -/* TPI Integration Test ATB Control Register 2 Register Definitions */ -#define TPI_ITATBCTR2_AFVALID2S_Pos 1U /*!< TPI ITATBCTR2: AFVALID2S Position */ -#define TPI_ITATBCTR2_AFVALID2S_Msk (0x1UL << TPI_ITATBCTR2_AFVALID2S_Pos) /*!< TPI ITATBCTR2: AFVALID2SS Mask */ - -#define TPI_ITATBCTR2_AFVALID1S_Pos 1U /*!< TPI ITATBCTR2: AFVALID1S Position */ -#define TPI_ITATBCTR2_AFVALID1S_Msk (0x1UL << TPI_ITATBCTR2_AFVALID1S_Pos) /*!< TPI ITATBCTR2: AFVALID1SS Mask */ - -#define TPI_ITATBCTR2_ATREADY2S_Pos 0U /*!< TPI ITATBCTR2: ATREADY2S Position */ -#define TPI_ITATBCTR2_ATREADY2S_Msk (0x1UL /*<< TPI_ITATBCTR2_ATREADY2S_Pos*/) /*!< TPI ITATBCTR2: ATREADY2S Mask */ - -#define TPI_ITATBCTR2_ATREADY1S_Pos 0U /*!< TPI ITATBCTR2: ATREADY1S Position */ -#define TPI_ITATBCTR2_ATREADY1S_Msk (0x1UL /*<< TPI_ITATBCTR2_ATREADY1S_Pos*/) /*!< TPI ITATBCTR2: ATREADY1S Mask */ - -/* TPI Integration Test FIFO Test Data 1 Register Definitions */ -#define TPI_ITFTTD1_ATB_IF2_ATVALID_Pos 29U /*!< TPI ITFTTD1: ATB Interface 2 ATVALID Position */ -#define TPI_ITFTTD1_ATB_IF2_ATVALID_Msk (0x3UL << TPI_ITFTTD1_ATB_IF2_ATVALID_Pos) /*!< TPI ITFTTD1: ATB Interface 2 ATVALID Mask */ - -#define TPI_ITFTTD1_ATB_IF2_bytecount_Pos 27U /*!< TPI ITFTTD1: ATB Interface 2 byte count Position */ -#define TPI_ITFTTD1_ATB_IF2_bytecount_Msk (0x3UL << TPI_ITFTTD1_ATB_IF2_bytecount_Pos) /*!< TPI ITFTTD1: ATB Interface 2 byte count Mask */ - -#define TPI_ITFTTD1_ATB_IF1_ATVALID_Pos 26U /*!< TPI ITFTTD1: ATB Interface 1 ATVALID Position */ -#define TPI_ITFTTD1_ATB_IF1_ATVALID_Msk (0x3UL << TPI_ITFTTD1_ATB_IF1_ATVALID_Pos) /*!< TPI ITFTTD1: ATB Interface 1 ATVALID Mask */ - -#define TPI_ITFTTD1_ATB_IF1_bytecount_Pos 24U /*!< TPI ITFTTD1: ATB Interface 1 byte count Position */ -#define TPI_ITFTTD1_ATB_IF1_bytecount_Msk (0x3UL << TPI_ITFTTD1_ATB_IF1_bytecount_Pos) /*!< TPI ITFTTD1: ATB Interface 1 byte countt Mask */ - -#define TPI_ITFTTD1_ATB_IF2_data2_Pos 16U /*!< TPI ITFTTD1: ATB Interface 2 data2 Position */ -#define TPI_ITFTTD1_ATB_IF2_data2_Msk (0xFFUL << TPI_ITFTTD1_ATB_IF2_data1_Pos) /*!< TPI ITFTTD1: ATB Interface 2 data2 Mask */ - -#define TPI_ITFTTD1_ATB_IF2_data1_Pos 8U /*!< TPI ITFTTD1: ATB Interface 2 data1 Position */ -#define TPI_ITFTTD1_ATB_IF2_data1_Msk (0xFFUL << TPI_ITFTTD1_ATB_IF2_data1_Pos) /*!< TPI ITFTTD1: ATB Interface 2 data1 Mask */ - -#define TPI_ITFTTD1_ATB_IF2_data0_Pos 0U /*!< TPI ITFTTD1: ATB Interface 2 data0 Position */ -#define TPI_ITFTTD1_ATB_IF2_data0_Msk (0xFFUL /*<< TPI_ITFTTD1_ATB_IF2_data0_Pos*/) /*!< TPI ITFTTD1: ATB Interface 2 data0 Mask */ - -/* TPI Integration Test ATB Control Register 0 Definitions */ -#define TPI_ITATBCTR0_AFVALID2S_Pos 1U /*!< TPI ITATBCTR0: AFVALID2S Position */ -#define TPI_ITATBCTR0_AFVALID2S_Msk (0x1UL << TPI_ITATBCTR0_AFVALID2S_Pos) /*!< TPI ITATBCTR0: AFVALID2SS Mask */ - -#define TPI_ITATBCTR0_AFVALID1S_Pos 1U /*!< TPI ITATBCTR0: AFVALID1S Position */ -#define TPI_ITATBCTR0_AFVALID1S_Msk (0x1UL << TPI_ITATBCTR0_AFVALID1S_Pos) /*!< TPI ITATBCTR0: AFVALID1SS Mask */ - -#define TPI_ITATBCTR0_ATREADY2S_Pos 0U /*!< TPI ITATBCTR0: ATREADY2S Position */ -#define TPI_ITATBCTR0_ATREADY2S_Msk (0x1UL /*<< TPI_ITATBCTR0_ATREADY2S_Pos*/) /*!< TPI ITATBCTR0: ATREADY2S Mask */ - -#define TPI_ITATBCTR0_ATREADY1S_Pos 0U /*!< TPI ITATBCTR0: ATREADY1S Position */ -#define TPI_ITATBCTR0_ATREADY1S_Msk (0x1UL /*<< TPI_ITATBCTR0_ATREADY1S_Pos*/) /*!< TPI ITATBCTR0: ATREADY1S Mask */ - -/* TPI Integration Mode Control Register Definitions */ -#define TPI_ITCTRL_Mode_Pos 0U /*!< TPI ITCTRL: Mode Position */ -#define TPI_ITCTRL_Mode_Msk (0x3UL /*<< TPI_ITCTRL_Mode_Pos*/) /*!< TPI ITCTRL: Mode Mask */ - -/* TPI DEVID Register Definitions */ -#define TPI_DEVID_NRZVALID_Pos 11U /*!< TPI DEVID: NRZVALID Position */ -#define TPI_DEVID_NRZVALID_Msk (0x1UL << TPI_DEVID_NRZVALID_Pos) /*!< TPI DEVID: NRZVALID Mask */ - -#define TPI_DEVID_MANCVALID_Pos 10U /*!< TPI DEVID: MANCVALID Position */ -#define TPI_DEVID_MANCVALID_Msk (0x1UL << TPI_DEVID_MANCVALID_Pos) /*!< TPI DEVID: MANCVALID Mask */ - -#define TPI_DEVID_PTINVALID_Pos 9U /*!< TPI DEVID: PTINVALID Position */ -#define TPI_DEVID_PTINVALID_Msk (0x1UL << TPI_DEVID_PTINVALID_Pos) /*!< TPI DEVID: PTINVALID Mask */ - -#define TPI_DEVID_FIFOSZ_Pos 6U /*!< TPI DEVID: FIFOSZ Position */ -#define TPI_DEVID_FIFOSZ_Msk (0x7UL << TPI_DEVID_FIFOSZ_Pos) /*!< TPI DEVID: FIFOSZ Mask */ - -#define TPI_DEVID_NrTraceInput_Pos 0U /*!< TPI DEVID: NrTraceInput Position */ -#define TPI_DEVID_NrTraceInput_Msk (0x3FUL /*<< TPI_DEVID_NrTraceInput_Pos*/) /*!< TPI DEVID: NrTraceInput Mask */ - -/* TPI DEVTYPE Register Definitions */ -#define TPI_DEVTYPE_SubType_Pos 4U /*!< TPI DEVTYPE: SubType Position */ -#define TPI_DEVTYPE_SubType_Msk (0xFUL /*<< TPI_DEVTYPE_SubType_Pos*/) /*!< TPI DEVTYPE: SubType Mask */ - -#define TPI_DEVTYPE_MajorType_Pos 0U /*!< TPI DEVTYPE: MajorType Position */ -#define TPI_DEVTYPE_MajorType_Msk (0xFUL << TPI_DEVTYPE_MajorType_Pos) /*!< TPI DEVTYPE: MajorType Mask */ - -/*@}*/ /* end of group CMSIS_TPI */ - - -#if defined (__MPU_PRESENT) && (__MPU_PRESENT == 1U) -/** - \ingroup CMSIS_core_register - \defgroup CMSIS_MPU Memory Protection Unit (MPU) - \brief Type definitions for the Memory Protection Unit (MPU) - @{ - */ - -/** - \brief Structure type to access the Memory Protection Unit (MPU). - */ -typedef struct -{ - __IM uint32_t TYPE; /*!< Offset: 0x000 (R/ ) MPU Type Register */ - __IOM uint32_t CTRL; /*!< Offset: 0x004 (R/W) MPU Control Register */ - __IOM uint32_t RNR; /*!< Offset: 0x008 (R/W) MPU Region Number Register */ - __IOM uint32_t RBAR; /*!< Offset: 0x00C (R/W) MPU Region Base Address Register */ - __IOM uint32_t RLAR; /*!< Offset: 0x010 (R/W) MPU Region Limit Address Register */ - uint32_t RESERVED0[7U]; - union { - __IOM uint32_t MAIR[2]; - struct { - __IOM uint32_t MAIR0; /*!< Offset: 0x030 (R/W) MPU Memory Attribute Indirection Register 0 */ - __IOM uint32_t MAIR1; /*!< Offset: 0x034 (R/W) MPU Memory Attribute Indirection Register 1 */ - }; - }; -} MPU_Type; - -#define MPU_TYPE_RALIASES 1U - -/* MPU Type Register Definitions */ -#define MPU_TYPE_IREGION_Pos 16U /*!< MPU TYPE: IREGION Position */ -#define MPU_TYPE_IREGION_Msk (0xFFUL << MPU_TYPE_IREGION_Pos) /*!< MPU TYPE: IREGION Mask */ - -#define MPU_TYPE_DREGION_Pos 8U /*!< MPU TYPE: DREGION Position */ -#define MPU_TYPE_DREGION_Msk (0xFFUL << MPU_TYPE_DREGION_Pos) /*!< MPU TYPE: DREGION Mask */ - -#define MPU_TYPE_SEPARATE_Pos 0U /*!< MPU TYPE: SEPARATE Position */ -#define MPU_TYPE_SEPARATE_Msk (1UL /*<< MPU_TYPE_SEPARATE_Pos*/) /*!< MPU TYPE: SEPARATE Mask */ - -/* MPU Control Register Definitions */ -#define MPU_CTRL_PRIVDEFENA_Pos 2U /*!< MPU CTRL: PRIVDEFENA Position */ -#define MPU_CTRL_PRIVDEFENA_Msk (1UL << MPU_CTRL_PRIVDEFENA_Pos) /*!< MPU CTRL: PRIVDEFENA Mask */ - -#define MPU_CTRL_HFNMIENA_Pos 1U /*!< MPU CTRL: HFNMIENA Position */ -#define MPU_CTRL_HFNMIENA_Msk (1UL << MPU_CTRL_HFNMIENA_Pos) /*!< MPU CTRL: HFNMIENA Mask */ - -#define MPU_CTRL_ENABLE_Pos 0U /*!< MPU CTRL: ENABLE Position */ -#define MPU_CTRL_ENABLE_Msk (1UL /*<< MPU_CTRL_ENABLE_Pos*/) /*!< MPU CTRL: ENABLE Mask */ - -/* MPU Region Number Register Definitions */ -#define MPU_RNR_REGION_Pos 0U /*!< MPU RNR: REGION Position */ -#define MPU_RNR_REGION_Msk (0xFFUL /*<< MPU_RNR_REGION_Pos*/) /*!< MPU RNR: REGION Mask */ - -/* MPU Region Base Address Register Definitions */ -#define MPU_RBAR_BASE_Pos 5U /*!< MPU RBAR: BASE Position */ -#define MPU_RBAR_BASE_Msk (0x7FFFFFFUL << MPU_RBAR_BASE_Pos) /*!< MPU RBAR: BASE Mask */ - -#define MPU_RBAR_SH_Pos 3U /*!< MPU RBAR: SH Position */ -#define MPU_RBAR_SH_Msk (0x3UL << MPU_RBAR_SH_Pos) /*!< MPU RBAR: SH Mask */ - -#define MPU_RBAR_AP_Pos 1U /*!< MPU RBAR: AP Position */ -#define MPU_RBAR_AP_Msk (0x3UL << MPU_RBAR_AP_Pos) /*!< MPU RBAR: AP Mask */ - -#define MPU_RBAR_XN_Pos 0U /*!< MPU RBAR: XN Position */ -#define MPU_RBAR_XN_Msk (01UL /*<< MPU_RBAR_XN_Pos*/) /*!< MPU RBAR: XN Mask */ - -/* MPU Region Limit Address Register Definitions */ -#define MPU_RLAR_LIMIT_Pos 5U /*!< MPU RLAR: LIMIT Position */ -#define MPU_RLAR_LIMIT_Msk (0x7FFFFFFUL << MPU_RLAR_LIMIT_Pos) /*!< MPU RLAR: LIMIT Mask */ - -#define MPU_RLAR_AttrIndx_Pos 1U /*!< MPU RLAR: AttrIndx Position */ -#define MPU_RLAR_AttrIndx_Msk (0x7UL << MPU_RLAR_AttrIndx_Pos) /*!< MPU RLAR: AttrIndx Mask */ - -#define MPU_RLAR_EN_Pos 0U /*!< MPU RLAR: EN Position */ -#define MPU_RLAR_EN_Msk (1UL /*<< MPU_RLAR_EN_Pos*/) /*!< MPU RLAR: EN Mask */ - -/* MPU Memory Attribute Indirection Register 0 Definitions */ -#define MPU_MAIR0_Attr3_Pos 24U /*!< MPU MAIR0: Attr3 Position */ -#define MPU_MAIR0_Attr3_Msk (0xFFUL << MPU_MAIR0_Attr3_Pos) /*!< MPU MAIR0: Attr3 Mask */ - -#define MPU_MAIR0_Attr2_Pos 16U /*!< MPU MAIR0: Attr2 Position */ -#define MPU_MAIR0_Attr2_Msk (0xFFUL << MPU_MAIR0_Attr2_Pos) /*!< MPU MAIR0: Attr2 Mask */ - -#define MPU_MAIR0_Attr1_Pos 8U /*!< MPU MAIR0: Attr1 Position */ -#define MPU_MAIR0_Attr1_Msk (0xFFUL << MPU_MAIR0_Attr1_Pos) /*!< MPU MAIR0: Attr1 Mask */ - -#define MPU_MAIR0_Attr0_Pos 0U /*!< MPU MAIR0: Attr0 Position */ -#define MPU_MAIR0_Attr0_Msk (0xFFUL /*<< MPU_MAIR0_Attr0_Pos*/) /*!< MPU MAIR0: Attr0 Mask */ - -/* MPU Memory Attribute Indirection Register 1 Definitions */ -#define MPU_MAIR1_Attr7_Pos 24U /*!< MPU MAIR1: Attr7 Position */ -#define MPU_MAIR1_Attr7_Msk (0xFFUL << MPU_MAIR1_Attr7_Pos) /*!< MPU MAIR1: Attr7 Mask */ - -#define MPU_MAIR1_Attr6_Pos 16U /*!< MPU MAIR1: Attr6 Position */ -#define MPU_MAIR1_Attr6_Msk (0xFFUL << MPU_MAIR1_Attr6_Pos) /*!< MPU MAIR1: Attr6 Mask */ - -#define MPU_MAIR1_Attr5_Pos 8U /*!< MPU MAIR1: Attr5 Position */ -#define MPU_MAIR1_Attr5_Msk (0xFFUL << MPU_MAIR1_Attr5_Pos) /*!< MPU MAIR1: Attr5 Mask */ - -#define MPU_MAIR1_Attr4_Pos 0U /*!< MPU MAIR1: Attr4 Position */ -#define MPU_MAIR1_Attr4_Msk (0xFFUL /*<< MPU_MAIR1_Attr4_Pos*/) /*!< MPU MAIR1: Attr4 Mask */ - -/*@} end of group CMSIS_MPU */ -#endif - - -#if defined (__ARM_FEATURE_CMSE) && (__ARM_FEATURE_CMSE == 3U) -/** - \ingroup CMSIS_core_register - \defgroup CMSIS_SAU Security Attribution Unit (SAU) - \brief Type definitions for the Security Attribution Unit (SAU) - @{ - */ - -/** - \brief Structure type to access the Security Attribution Unit (SAU). - */ -typedef struct -{ - __IOM uint32_t CTRL; /*!< Offset: 0x000 (R/W) SAU Control Register */ - __IM uint32_t TYPE; /*!< Offset: 0x004 (R/ ) SAU Type Register */ -#if defined (__SAUREGION_PRESENT) && (__SAUREGION_PRESENT == 1U) - __IOM uint32_t RNR; /*!< Offset: 0x008 (R/W) SAU Region Number Register */ - __IOM uint32_t RBAR; /*!< Offset: 0x00C (R/W) SAU Region Base Address Register */ - __IOM uint32_t RLAR; /*!< Offset: 0x010 (R/W) SAU Region Limit Address Register */ -#endif -} SAU_Type; - -/* SAU Control Register Definitions */ -#define SAU_CTRL_ALLNS_Pos 1U /*!< SAU CTRL: ALLNS Position */ -#define SAU_CTRL_ALLNS_Msk (1UL << SAU_CTRL_ALLNS_Pos) /*!< SAU CTRL: ALLNS Mask */ - -#define SAU_CTRL_ENABLE_Pos 0U /*!< SAU CTRL: ENABLE Position */ -#define SAU_CTRL_ENABLE_Msk (1UL /*<< SAU_CTRL_ENABLE_Pos*/) /*!< SAU CTRL: ENABLE Mask */ - -/* SAU Type Register Definitions */ -#define SAU_TYPE_SREGION_Pos 0U /*!< SAU TYPE: SREGION Position */ -#define SAU_TYPE_SREGION_Msk (0xFFUL /*<< SAU_TYPE_SREGION_Pos*/) /*!< SAU TYPE: SREGION Mask */ - -#if defined (__SAUREGION_PRESENT) && (__SAUREGION_PRESENT == 1U) -/* SAU Region Number Register Definitions */ -#define SAU_RNR_REGION_Pos 0U /*!< SAU RNR: REGION Position */ -#define SAU_RNR_REGION_Msk (0xFFUL /*<< SAU_RNR_REGION_Pos*/) /*!< SAU RNR: REGION Mask */ - -/* SAU Region Base Address Register Definitions */ -#define SAU_RBAR_BADDR_Pos 5U /*!< SAU RBAR: BADDR Position */ -#define SAU_RBAR_BADDR_Msk (0x7FFFFFFUL << SAU_RBAR_BADDR_Pos) /*!< SAU RBAR: BADDR Mask */ - -/* SAU Region Limit Address Register Definitions */ -#define SAU_RLAR_LADDR_Pos 5U /*!< SAU RLAR: LADDR Position */ -#define SAU_RLAR_LADDR_Msk (0x7FFFFFFUL << SAU_RLAR_LADDR_Pos) /*!< SAU RLAR: LADDR Mask */ - -#define SAU_RLAR_NSC_Pos 1U /*!< SAU RLAR: NSC Position */ -#define SAU_RLAR_NSC_Msk (1UL << SAU_RLAR_NSC_Pos) /*!< SAU RLAR: NSC Mask */ - -#define SAU_RLAR_ENABLE_Pos 0U /*!< SAU RLAR: ENABLE Position */ -#define SAU_RLAR_ENABLE_Msk (1UL /*<< SAU_RLAR_ENABLE_Pos*/) /*!< SAU RLAR: ENABLE Mask */ - -#endif /* defined (__SAUREGION_PRESENT) && (__SAUREGION_PRESENT == 1U) */ - -/*@} end of group CMSIS_SAU */ -#endif /* defined (__ARM_FEATURE_CMSE) && (__ARM_FEATURE_CMSE == 3U) */ - - -/** - \ingroup CMSIS_core_register - \defgroup CMSIS_CoreDebug Core Debug Registers (CoreDebug) - \brief Type definitions for the Core Debug Registers - @{ - */ - -/** - \brief Structure type to access the Core Debug Register (CoreDebug). - */ -typedef struct -{ - __IOM uint32_t DHCSR; /*!< Offset: 0x000 (R/W) Debug Halting Control and Status Register */ - __OM uint32_t DCRSR; /*!< Offset: 0x004 ( /W) Debug Core Register Selector Register */ - __IOM uint32_t DCRDR; /*!< Offset: 0x008 (R/W) Debug Core Register Data Register */ - __IOM uint32_t DEMCR; /*!< Offset: 0x00C (R/W) Debug Exception and Monitor Control Register */ - uint32_t RESERVED4[1U]; - __IOM uint32_t DAUTHCTRL; /*!< Offset: 0x014 (R/W) Debug Authentication Control Register */ - __IOM uint32_t DSCSR; /*!< Offset: 0x018 (R/W) Debug Security Control and Status Register */ -} CoreDebug_Type; - -/* Debug Halting Control and Status Register Definitions */ -#define CoreDebug_DHCSR_DBGKEY_Pos 16U /*!< CoreDebug DHCSR: DBGKEY Position */ -#define CoreDebug_DHCSR_DBGKEY_Msk (0xFFFFUL << CoreDebug_DHCSR_DBGKEY_Pos) /*!< CoreDebug DHCSR: DBGKEY Mask */ - -#define CoreDebug_DHCSR_S_RESTART_ST_Pos 26U /*!< CoreDebug DHCSR: S_RESTART_ST Position */ -#define CoreDebug_DHCSR_S_RESTART_ST_Msk (1UL << CoreDebug_DHCSR_S_RESTART_ST_Pos) /*!< CoreDebug DHCSR: S_RESTART_ST Mask */ - -#define CoreDebug_DHCSR_S_RESET_ST_Pos 25U /*!< CoreDebug DHCSR: S_RESET_ST Position */ -#define CoreDebug_DHCSR_S_RESET_ST_Msk (1UL << CoreDebug_DHCSR_S_RESET_ST_Pos) /*!< CoreDebug DHCSR: S_RESET_ST Mask */ - -#define CoreDebug_DHCSR_S_RETIRE_ST_Pos 24U /*!< CoreDebug DHCSR: S_RETIRE_ST Position */ -#define CoreDebug_DHCSR_S_RETIRE_ST_Msk (1UL << CoreDebug_DHCSR_S_RETIRE_ST_Pos) /*!< CoreDebug DHCSR: S_RETIRE_ST Mask */ - -#define CoreDebug_DHCSR_S_LOCKUP_Pos 19U /*!< CoreDebug DHCSR: S_LOCKUP Position */ -#define CoreDebug_DHCSR_S_LOCKUP_Msk (1UL << CoreDebug_DHCSR_S_LOCKUP_Pos) /*!< CoreDebug DHCSR: S_LOCKUP Mask */ - -#define CoreDebug_DHCSR_S_SLEEP_Pos 18U /*!< CoreDebug DHCSR: S_SLEEP Position */ -#define CoreDebug_DHCSR_S_SLEEP_Msk (1UL << CoreDebug_DHCSR_S_SLEEP_Pos) /*!< CoreDebug DHCSR: S_SLEEP Mask */ - -#define CoreDebug_DHCSR_S_HALT_Pos 17U /*!< CoreDebug DHCSR: S_HALT Position */ -#define CoreDebug_DHCSR_S_HALT_Msk (1UL << CoreDebug_DHCSR_S_HALT_Pos) /*!< CoreDebug DHCSR: S_HALT Mask */ - -#define CoreDebug_DHCSR_S_REGRDY_Pos 16U /*!< CoreDebug DHCSR: S_REGRDY Position */ -#define CoreDebug_DHCSR_S_REGRDY_Msk (1UL << CoreDebug_DHCSR_S_REGRDY_Pos) /*!< CoreDebug DHCSR: S_REGRDY Mask */ - -#define CoreDebug_DHCSR_C_MASKINTS_Pos 3U /*!< CoreDebug DHCSR: C_MASKINTS Position */ -#define CoreDebug_DHCSR_C_MASKINTS_Msk (1UL << CoreDebug_DHCSR_C_MASKINTS_Pos) /*!< CoreDebug DHCSR: C_MASKINTS Mask */ - -#define CoreDebug_DHCSR_C_STEP_Pos 2U /*!< CoreDebug DHCSR: C_STEP Position */ -#define CoreDebug_DHCSR_C_STEP_Msk (1UL << CoreDebug_DHCSR_C_STEP_Pos) /*!< CoreDebug DHCSR: C_STEP Mask */ - -#define CoreDebug_DHCSR_C_HALT_Pos 1U /*!< CoreDebug DHCSR: C_HALT Position */ -#define CoreDebug_DHCSR_C_HALT_Msk (1UL << CoreDebug_DHCSR_C_HALT_Pos) /*!< CoreDebug DHCSR: C_HALT Mask */ - -#define CoreDebug_DHCSR_C_DEBUGEN_Pos 0U /*!< CoreDebug DHCSR: C_DEBUGEN Position */ -#define CoreDebug_DHCSR_C_DEBUGEN_Msk (1UL /*<< CoreDebug_DHCSR_C_DEBUGEN_Pos*/) /*!< CoreDebug DHCSR: C_DEBUGEN Mask */ - -/* Debug Core Register Selector Register Definitions */ -#define CoreDebug_DCRSR_REGWnR_Pos 16U /*!< CoreDebug DCRSR: REGWnR Position */ -#define CoreDebug_DCRSR_REGWnR_Msk (1UL << CoreDebug_DCRSR_REGWnR_Pos) /*!< CoreDebug DCRSR: REGWnR Mask */ - -#define CoreDebug_DCRSR_REGSEL_Pos 0U /*!< CoreDebug DCRSR: REGSEL Position */ -#define CoreDebug_DCRSR_REGSEL_Msk (0x1FUL /*<< CoreDebug_DCRSR_REGSEL_Pos*/) /*!< CoreDebug DCRSR: REGSEL Mask */ - -/* Debug Exception and Monitor Control Register */ -#define CoreDebug_DEMCR_DWTENA_Pos 24U /*!< CoreDebug DEMCR: DWTENA Position */ -#define CoreDebug_DEMCR_DWTENA_Msk (1UL << CoreDebug_DEMCR_DWTENA_Pos) /*!< CoreDebug DEMCR: DWTENA Mask */ - -#define CoreDebug_DEMCR_VC_HARDERR_Pos 10U /*!< CoreDebug DEMCR: VC_HARDERR Position */ -#define CoreDebug_DEMCR_VC_HARDERR_Msk (1UL << CoreDebug_DEMCR_VC_HARDERR_Pos) /*!< CoreDebug DEMCR: VC_HARDERR Mask */ - -#define CoreDebug_DEMCR_VC_CORERESET_Pos 0U /*!< CoreDebug DEMCR: VC_CORERESET Position */ -#define CoreDebug_DEMCR_VC_CORERESET_Msk (1UL /*<< CoreDebug_DEMCR_VC_CORERESET_Pos*/) /*!< CoreDebug DEMCR: VC_CORERESET Mask */ - -/* Debug Authentication Control Register Definitions */ -#define CoreDebug_DAUTHCTRL_INTSPNIDEN_Pos 3U /*!< CoreDebug DAUTHCTRL: INTSPNIDEN, Position */ -#define CoreDebug_DAUTHCTRL_INTSPNIDEN_Msk (1UL << CoreDebug_DAUTHCTRL_INTSPNIDEN_Pos) /*!< CoreDebug DAUTHCTRL: INTSPNIDEN, Mask */ - -#define CoreDebug_DAUTHCTRL_SPNIDENSEL_Pos 2U /*!< CoreDebug DAUTHCTRL: SPNIDENSEL Position */ -#define CoreDebug_DAUTHCTRL_SPNIDENSEL_Msk (1UL << CoreDebug_DAUTHCTRL_SPNIDENSEL_Pos) /*!< CoreDebug DAUTHCTRL: SPNIDENSEL Mask */ - -#define CoreDebug_DAUTHCTRL_INTSPIDEN_Pos 1U /*!< CoreDebug DAUTHCTRL: INTSPIDEN Position */ -#define CoreDebug_DAUTHCTRL_INTSPIDEN_Msk (1UL << CoreDebug_DAUTHCTRL_INTSPIDEN_Pos) /*!< CoreDebug DAUTHCTRL: INTSPIDEN Mask */ - -#define CoreDebug_DAUTHCTRL_SPIDENSEL_Pos 0U /*!< CoreDebug DAUTHCTRL: SPIDENSEL Position */ -#define CoreDebug_DAUTHCTRL_SPIDENSEL_Msk (1UL /*<< CoreDebug_DAUTHCTRL_SPIDENSEL_Pos*/) /*!< CoreDebug DAUTHCTRL: SPIDENSEL Mask */ - -/* Debug Security Control and Status Register Definitions */ -#define CoreDebug_DSCSR_CDS_Pos 16U /*!< CoreDebug DSCSR: CDS Position */ -#define CoreDebug_DSCSR_CDS_Msk (1UL << CoreDebug_DSCSR_CDS_Pos) /*!< CoreDebug DSCSR: CDS Mask */ - -#define CoreDebug_DSCSR_SBRSEL_Pos 1U /*!< CoreDebug DSCSR: SBRSEL Position */ -#define CoreDebug_DSCSR_SBRSEL_Msk (1UL << CoreDebug_DSCSR_SBRSEL_Pos) /*!< CoreDebug DSCSR: SBRSEL Mask */ - -#define CoreDebug_DSCSR_SBRSELEN_Pos 0U /*!< CoreDebug DSCSR: SBRSELEN Position */ -#define CoreDebug_DSCSR_SBRSELEN_Msk (1UL /*<< CoreDebug_DSCSR_SBRSELEN_Pos*/) /*!< CoreDebug DSCSR: SBRSELEN Mask */ - -/*@} end of group CMSIS_CoreDebug */ - - -/** - \ingroup CMSIS_core_register - \defgroup CMSIS_core_bitfield Core register bit field macros - \brief Macros for use with bit field definitions (xxx_Pos, xxx_Msk). - @{ - */ - -/** - \brief Mask and shift a bit field value for use in a register bit range. - \param[in] field Name of the register bit field. - \param[in] value Value of the bit field. This parameter is interpreted as an uint32_t type. - \return Masked and shifted value. -*/ -#define _VAL2FLD(field, value) (((uint32_t)(value) << field ## _Pos) & field ## _Msk) - -/** - \brief Mask and shift a register value to extract a bit filed value. - \param[in] field Name of the register bit field. - \param[in] value Value of register. This parameter is interpreted as an uint32_t type. - \return Masked and shifted bit field value. -*/ -#define _FLD2VAL(field, value) (((uint32_t)(value) & field ## _Msk) >> field ## _Pos) - -/*@} end of group CMSIS_core_bitfield */ - - -/** - \ingroup CMSIS_core_register - \defgroup CMSIS_core_base Core Definitions - \brief Definitions for base addresses, unions, and structures. - @{ - */ - -/* Memory mapping of Core Hardware */ - #define SCS_BASE (0xE000E000UL) /*!< System Control Space Base Address */ - #define DWT_BASE (0xE0001000UL) /*!< DWT Base Address */ - #define TPI_BASE (0xE0040000UL) /*!< TPI Base Address */ - #define CoreDebug_BASE (0xE000EDF0UL) /*!< Core Debug Base Address */ - #define SysTick_BASE (SCS_BASE + 0x0010UL) /*!< SysTick Base Address */ - #define NVIC_BASE (SCS_BASE + 0x0100UL) /*!< NVIC Base Address */ - #define SCB_BASE (SCS_BASE + 0x0D00UL) /*!< System Control Block Base Address */ - - - #define SCB ((SCB_Type *) SCB_BASE ) /*!< SCB configuration struct */ - #define SysTick ((SysTick_Type *) SysTick_BASE ) /*!< SysTick configuration struct */ - #define NVIC ((NVIC_Type *) NVIC_BASE ) /*!< NVIC configuration struct */ - #define DWT ((DWT_Type *) DWT_BASE ) /*!< DWT configuration struct */ - #define TPI ((TPI_Type *) TPI_BASE ) /*!< TPI configuration struct */ - #define CoreDebug ((CoreDebug_Type *) CoreDebug_BASE ) /*!< Core Debug configuration struct */ - - #if defined (__MPU_PRESENT) && (__MPU_PRESENT == 1U) - #define MPU_BASE (SCS_BASE + 0x0D90UL) /*!< Memory Protection Unit */ - #define MPU ((MPU_Type *) MPU_BASE ) /*!< Memory Protection Unit */ - #endif - - #if defined (__ARM_FEATURE_CMSE) && (__ARM_FEATURE_CMSE == 3U) - #define SAU_BASE (SCS_BASE + 0x0DD0UL) /*!< Security Attribution Unit */ - #define SAU ((SAU_Type *) SAU_BASE ) /*!< Security Attribution Unit */ - #endif - -#if defined (__ARM_FEATURE_CMSE) && (__ARM_FEATURE_CMSE == 3U) - #define SCS_BASE_NS (0xE002E000UL) /*!< System Control Space Base Address (non-secure address space) */ - #define CoreDebug_BASE_NS (0xE002EDF0UL) /*!< Core Debug Base Address (non-secure address space) */ - #define SysTick_BASE_NS (SCS_BASE_NS + 0x0010UL) /*!< SysTick Base Address (non-secure address space) */ - #define NVIC_BASE_NS (SCS_BASE_NS + 0x0100UL) /*!< NVIC Base Address (non-secure address space) */ - #define SCB_BASE_NS (SCS_BASE_NS + 0x0D00UL) /*!< System Control Block Base Address (non-secure address space) */ - - #define SCB_NS ((SCB_Type *) SCB_BASE_NS ) /*!< SCB configuration struct (non-secure address space) */ - #define SysTick_NS ((SysTick_Type *) SysTick_BASE_NS ) /*!< SysTick configuration struct (non-secure address space) */ - #define NVIC_NS ((NVIC_Type *) NVIC_BASE_NS ) /*!< NVIC configuration struct (non-secure address space) */ - #define CoreDebug_NS ((CoreDebug_Type *) CoreDebug_BASE_NS) /*!< Core Debug configuration struct (non-secure address space) */ - - #if defined (__MPU_PRESENT) && (__MPU_PRESENT == 1U) - #define MPU_BASE_NS (SCS_BASE_NS + 0x0D90UL) /*!< Memory Protection Unit (non-secure address space) */ - #define MPU_NS ((MPU_Type *) MPU_BASE_NS ) /*!< Memory Protection Unit (non-secure address space) */ - #endif - -#endif /* defined (__ARM_FEATURE_CMSE) && (__ARM_FEATURE_CMSE == 3U) */ -/*@} */ - - - -/******************************************************************************* - * Hardware Abstraction Layer - Core Function Interface contains: - - Core NVIC Functions - - Core SysTick Functions - - Core Register Access Functions - ******************************************************************************/ -/** - \defgroup CMSIS_Core_FunctionInterface Functions and Instructions Reference -*/ - - - -/* ########################## NVIC functions #################################### */ -/** - \ingroup CMSIS_Core_FunctionInterface - \defgroup CMSIS_Core_NVICFunctions NVIC Functions - \brief Functions that manage interrupts and exceptions via the NVIC. - @{ - */ - -#ifdef CMSIS_NVIC_VIRTUAL - #ifndef CMSIS_NVIC_VIRTUAL_HEADER_FILE - #define CMSIS_NVIC_VIRTUAL_HEADER_FILE "cmsis_nvic_virtual.h" - #endif - #include CMSIS_NVIC_VIRTUAL_HEADER_FILE -#else -/*#define NVIC_SetPriorityGrouping __NVIC_SetPriorityGrouping not available for Cortex-M23 */ -/*#define NVIC_GetPriorityGrouping __NVIC_GetPriorityGrouping not available for Cortex-M23 */ - #define NVIC_EnableIRQ __NVIC_EnableIRQ - #define NVIC_GetEnableIRQ __NVIC_GetEnableIRQ - #define NVIC_DisableIRQ __NVIC_DisableIRQ - #define NVIC_GetPendingIRQ __NVIC_GetPendingIRQ - #define NVIC_SetPendingIRQ __NVIC_SetPendingIRQ - #define NVIC_ClearPendingIRQ __NVIC_ClearPendingIRQ - #define NVIC_GetActive __NVIC_GetActive - #define NVIC_SetPriority __NVIC_SetPriority - #define NVIC_GetPriority __NVIC_GetPriority - #define NVIC_SystemReset __NVIC_SystemReset -#endif /* CMSIS_NVIC_VIRTUAL */ - -#ifdef CMSIS_VECTAB_VIRTUAL - #ifndef CMSIS_VECTAB_VIRTUAL_HEADER_FILE - #define CMSIS_VECTAB_VIRTUAL_HEADER_FILE "cmsis_vectab_virtual.h" - #endif - #include CMSIS_VECTAB_VIRTUAL_HEADER_FILE -#else - #define NVIC_SetVector __NVIC_SetVector - #define NVIC_GetVector __NVIC_GetVector -#endif /* (CMSIS_VECTAB_VIRTUAL) */ - -#define NVIC_USER_IRQ_OFFSET 16 - - -/* Special LR values for Secure/Non-Secure call handling and exception handling */ - -/* Function Return Payload (from ARMv8-M Architecture Reference Manual) LR value on entry from Secure BLXNS */ -#define FNC_RETURN (0xFEFFFFFFUL) /* bit [0] ignored when processing a branch */ - -/* The following EXC_RETURN mask values are used to evaluate the LR on exception entry */ -#define EXC_RETURN_PREFIX (0xFF000000UL) /* bits [31:24] set to indicate an EXC_RETURN value */ -#define EXC_RETURN_S (0x00000040UL) /* bit [6] stack used to push registers: 0=Non-secure 1=Secure */ -#define EXC_RETURN_DCRS (0x00000020UL) /* bit [5] stacking rules for called registers: 0=skipped 1=saved */ -#define EXC_RETURN_FTYPE (0x00000010UL) /* bit [4] allocate stack for floating-point context: 0=done 1=skipped */ -#define EXC_RETURN_MODE (0x00000008UL) /* bit [3] processor mode for return: 0=Handler mode 1=Thread mode */ -#define EXC_RETURN_SPSEL (0x00000002UL) /* bit [1] stack pointer used to restore context: 0=MSP 1=PSP */ -#define EXC_RETURN_ES (0x00000001UL) /* bit [0] security state exception was taken to: 0=Non-secure 1=Secure */ - -/* Integrity Signature (from ARMv8-M Architecture Reference Manual) for exception context stacking */ -#if defined (__FPU_PRESENT) && (__FPU_PRESENT == 1U) /* Value for processors with floating-point extension: */ -#define EXC_INTEGRITY_SIGNATURE (0xFEFA125AUL) /* bit [0] SFTC must match LR bit[4] EXC_RETURN_FTYPE */ -#else -#define EXC_INTEGRITY_SIGNATURE (0xFEFA125BUL) /* Value for processors without floating-point extension */ -#endif - - -/* Interrupt Priorities are WORD accessible only under Armv6-M */ -/* The following MACROS handle generation of the register offset and byte masks */ -#define _BIT_SHIFT(IRQn) ( ((((uint32_t)(int32_t)(IRQn)) ) & 0x03UL) * 8UL) -#define _SHP_IDX(IRQn) ( (((((uint32_t)(int32_t)(IRQn)) & 0x0FUL)-8UL) >> 2UL) ) -#define _IP_IDX(IRQn) ( (((uint32_t)(int32_t)(IRQn)) >> 2UL) ) - -#define __NVIC_SetPriorityGrouping(X) (void)(X) -#define __NVIC_GetPriorityGrouping() (0U) - -/** - \brief Enable Interrupt - \details Enables a device specific interrupt in the NVIC interrupt controller. - \param [in] IRQn Device specific interrupt number. - \note IRQn must not be negative. - */ -__STATIC_INLINE void __NVIC_EnableIRQ(IRQn_Type IRQn) -{ - if ((int32_t)(IRQn) >= 0) - { - NVIC->ISER[(((uint32_t)IRQn) >> 5UL)] = (uint32_t)(1UL << (((uint32_t)IRQn) & 0x1FUL)); - } -} - - -/** - \brief Get Interrupt Enable status - \details Returns a device specific interrupt enable status from the NVIC interrupt controller. - \param [in] IRQn Device specific interrupt number. - \return 0 Interrupt is not enabled. - \return 1 Interrupt is enabled. - \note IRQn must not be negative. - */ -__STATIC_INLINE uint32_t __NVIC_GetEnableIRQ(IRQn_Type IRQn) -{ - if ((int32_t)(IRQn) >= 0) - { - return((uint32_t)(((NVIC->ISER[(((uint32_t)IRQn) >> 5UL)] & (1UL << (((uint32_t)IRQn) & 0x1FUL))) != 0UL) ? 1UL : 0UL)); - } - else - { - return(0U); - } -} - - -/** - \brief Disable Interrupt - \details Disables a device specific interrupt in the NVIC interrupt controller. - \param [in] IRQn Device specific interrupt number. - \note IRQn must not be negative. - */ -__STATIC_INLINE void __NVIC_DisableIRQ(IRQn_Type IRQn) -{ - if ((int32_t)(IRQn) >= 0) - { - NVIC->ICER[(((uint32_t)IRQn) >> 5UL)] = (uint32_t)(1UL << (((uint32_t)IRQn) & 0x1FUL)); - __DSB(); - __ISB(); - } -} - - -/** - \brief Get Pending Interrupt - \details Reads the NVIC pending register and returns the pending bit for the specified device specific interrupt. - \param [in] IRQn Device specific interrupt number. - \return 0 Interrupt status is not pending. - \return 1 Interrupt status is pending. - \note IRQn must not be negative. - */ -__STATIC_INLINE uint32_t __NVIC_GetPendingIRQ(IRQn_Type IRQn) -{ - if ((int32_t)(IRQn) >= 0) - { - return((uint32_t)(((NVIC->ISPR[(((uint32_t)IRQn) >> 5UL)] & (1UL << (((uint32_t)IRQn) & 0x1FUL))) != 0UL) ? 1UL : 0UL)); - } - else - { - return(0U); - } -} - - -/** - \brief Set Pending Interrupt - \details Sets the pending bit of a device specific interrupt in the NVIC pending register. - \param [in] IRQn Device specific interrupt number. - \note IRQn must not be negative. - */ -__STATIC_INLINE void __NVIC_SetPendingIRQ(IRQn_Type IRQn) -{ - if ((int32_t)(IRQn) >= 0) - { - NVIC->ISPR[(((uint32_t)IRQn) >> 5UL)] = (uint32_t)(1UL << (((uint32_t)IRQn) & 0x1FUL)); - } -} - - -/** - \brief Clear Pending Interrupt - \details Clears the pending bit of a device specific interrupt in the NVIC pending register. - \param [in] IRQn Device specific interrupt number. - \note IRQn must not be negative. - */ -__STATIC_INLINE void __NVIC_ClearPendingIRQ(IRQn_Type IRQn) -{ - if ((int32_t)(IRQn) >= 0) - { - NVIC->ICPR[(((uint32_t)IRQn) >> 5UL)] = (uint32_t)(1UL << (((uint32_t)IRQn) & 0x1FUL)); - } -} - - -/** - \brief Get Active Interrupt - \details Reads the active register in the NVIC and returns the active bit for the device specific interrupt. - \param [in] IRQn Device specific interrupt number. - \return 0 Interrupt status is not active. - \return 1 Interrupt status is active. - \note IRQn must not be negative. - */ -__STATIC_INLINE uint32_t __NVIC_GetActive(IRQn_Type IRQn) -{ - if ((int32_t)(IRQn) >= 0) - { - return((uint32_t)(((NVIC->IABR[(((uint32_t)IRQn) >> 5UL)] & (1UL << (((uint32_t)IRQn) & 0x1FUL))) != 0UL) ? 1UL : 0UL)); - } - else - { - return(0U); - } -} - - -#if defined (__ARM_FEATURE_CMSE) && (__ARM_FEATURE_CMSE == 3U) -/** - \brief Get Interrupt Target State - \details Reads the interrupt target field in the NVIC and returns the interrupt target bit for the device specific interrupt. - \param [in] IRQn Device specific interrupt number. - \return 0 if interrupt is assigned to Secure - \return 1 if interrupt is assigned to Non Secure - \note IRQn must not be negative. - */ -__STATIC_INLINE uint32_t NVIC_GetTargetState(IRQn_Type IRQn) -{ - if ((int32_t)(IRQn) >= 0) - { - return((uint32_t)(((NVIC->ITNS[(((uint32_t)IRQn) >> 5UL)] & (1UL << (((uint32_t)IRQn) & 0x1FUL))) != 0UL) ? 1UL : 0UL)); - } - else - { - return(0U); - } -} - - -/** - \brief Set Interrupt Target State - \details Sets the interrupt target field in the NVIC and returns the interrupt target bit for the device specific interrupt. - \param [in] IRQn Device specific interrupt number. - \return 0 if interrupt is assigned to Secure - 1 if interrupt is assigned to Non Secure - \note IRQn must not be negative. - */ -__STATIC_INLINE uint32_t NVIC_SetTargetState(IRQn_Type IRQn) -{ - if ((int32_t)(IRQn) >= 0) - { - NVIC->ITNS[(((uint32_t)IRQn) >> 5UL)] |= ((uint32_t)(1UL << (((uint32_t)IRQn) & 0x1FUL))); - return((uint32_t)(((NVIC->ITNS[(((uint32_t)IRQn) >> 5UL)] & (1UL << (((uint32_t)IRQn) & 0x1FUL))) != 0UL) ? 1UL : 0UL)); - } - else - { - return(0U); - } -} - - -/** - \brief Clear Interrupt Target State - \details Clears the interrupt target field in the NVIC and returns the interrupt target bit for the device specific interrupt. - \param [in] IRQn Device specific interrupt number. - \return 0 if interrupt is assigned to Secure - 1 if interrupt is assigned to Non Secure - \note IRQn must not be negative. - */ -__STATIC_INLINE uint32_t NVIC_ClearTargetState(IRQn_Type IRQn) -{ - if ((int32_t)(IRQn) >= 0) - { - NVIC->ITNS[(((uint32_t)IRQn) >> 5UL)] &= ~((uint32_t)(1UL << (((uint32_t)IRQn) & 0x1FUL))); - return((uint32_t)(((NVIC->ITNS[(((uint32_t)IRQn) >> 5UL)] & (1UL << (((uint32_t)IRQn) & 0x1FUL))) != 0UL) ? 1UL : 0UL)); - } - else - { - return(0U); - } -} -#endif /* defined (__ARM_FEATURE_CMSE) && (__ARM_FEATURE_CMSE == 3U) */ - - -/** - \brief Set Interrupt Priority - \details Sets the priority of a device specific interrupt or a processor exception. - The interrupt number can be positive to specify a device specific interrupt, - or negative to specify a processor exception. - \param [in] IRQn Interrupt number. - \param [in] priority Priority to set. - \note The priority cannot be set for every processor exception. - */ -__STATIC_INLINE void __NVIC_SetPriority(IRQn_Type IRQn, uint32_t priority) -{ - if ((int32_t)(IRQn) >= 0) - { - NVIC->IPR[_IP_IDX(IRQn)] = ((uint32_t)(NVIC->IPR[_IP_IDX(IRQn)] & ~(0xFFUL << _BIT_SHIFT(IRQn))) | - (((priority << (8U - __NVIC_PRIO_BITS)) & (uint32_t)0xFFUL) << _BIT_SHIFT(IRQn))); - } - else - { - SCB->SHPR[_SHP_IDX(IRQn)] = ((uint32_t)(SCB->SHPR[_SHP_IDX(IRQn)] & ~(0xFFUL << _BIT_SHIFT(IRQn))) | - (((priority << (8U - __NVIC_PRIO_BITS)) & (uint32_t)0xFFUL) << _BIT_SHIFT(IRQn))); - } -} - - -/** - \brief Get Interrupt Priority - \details Reads the priority of a device specific interrupt or a processor exception. - The interrupt number can be positive to specify a device specific interrupt, - or negative to specify a processor exception. - \param [in] IRQn Interrupt number. - \return Interrupt Priority. - Value is aligned automatically to the implemented priority bits of the microcontroller. - */ -__STATIC_INLINE uint32_t __NVIC_GetPriority(IRQn_Type IRQn) -{ - - if ((int32_t)(IRQn) >= 0) - { - return((uint32_t)(((NVIC->IPR[ _IP_IDX(IRQn)] >> _BIT_SHIFT(IRQn) ) & (uint32_t)0xFFUL) >> (8U - __NVIC_PRIO_BITS))); - } - else - { - return((uint32_t)(((SCB->SHPR[_SHP_IDX(IRQn)] >> _BIT_SHIFT(IRQn) ) & (uint32_t)0xFFUL) >> (8U - __NVIC_PRIO_BITS))); - } -} - - -/** - \brief Encode Priority - \details Encodes the priority for an interrupt with the given priority group, - preemptive priority value, and subpriority value. - In case of a conflict between priority grouping and available - priority bits (__NVIC_PRIO_BITS), the smallest possible priority group is set. - \param [in] PriorityGroup Used priority group. - \param [in] PreemptPriority Preemptive priority value (starting from 0). - \param [in] SubPriority Subpriority value (starting from 0). - \return Encoded priority. Value can be used in the function \ref NVIC_SetPriority(). - */ -__STATIC_INLINE uint32_t NVIC_EncodePriority (uint32_t PriorityGroup, uint32_t PreemptPriority, uint32_t SubPriority) -{ - uint32_t PriorityGroupTmp = (PriorityGroup & (uint32_t)0x07UL); /* only values 0..7 are used */ - uint32_t PreemptPriorityBits; - uint32_t SubPriorityBits; - - PreemptPriorityBits = ((7UL - PriorityGroupTmp) > (uint32_t)(__NVIC_PRIO_BITS)) ? (uint32_t)(__NVIC_PRIO_BITS) : (uint32_t)(7UL - PriorityGroupTmp); - SubPriorityBits = ((PriorityGroupTmp + (uint32_t)(__NVIC_PRIO_BITS)) < (uint32_t)7UL) ? (uint32_t)0UL : (uint32_t)((PriorityGroupTmp - 7UL) + (uint32_t)(__NVIC_PRIO_BITS)); - - return ( - ((PreemptPriority & (uint32_t)((1UL << (PreemptPriorityBits)) - 1UL)) << SubPriorityBits) | - ((SubPriority & (uint32_t)((1UL << (SubPriorityBits )) - 1UL))) - ); -} - - -/** - \brief Decode Priority - \details Decodes an interrupt priority value with a given priority group to - preemptive priority value and subpriority value. - In case of a conflict between priority grouping and available - priority bits (__NVIC_PRIO_BITS) the smallest possible priority group is set. - \param [in] Priority Priority value, which can be retrieved with the function \ref NVIC_GetPriority(). - \param [in] PriorityGroup Used priority group. - \param [out] pPreemptPriority Preemptive priority value (starting from 0). - \param [out] pSubPriority Subpriority value (starting from 0). - */ -__STATIC_INLINE void NVIC_DecodePriority (uint32_t Priority, uint32_t PriorityGroup, uint32_t* const pPreemptPriority, uint32_t* const pSubPriority) -{ - uint32_t PriorityGroupTmp = (PriorityGroup & (uint32_t)0x07UL); /* only values 0..7 are used */ - uint32_t PreemptPriorityBits; - uint32_t SubPriorityBits; - - PreemptPriorityBits = ((7UL - PriorityGroupTmp) > (uint32_t)(__NVIC_PRIO_BITS)) ? (uint32_t)(__NVIC_PRIO_BITS) : (uint32_t)(7UL - PriorityGroupTmp); - SubPriorityBits = ((PriorityGroupTmp + (uint32_t)(__NVIC_PRIO_BITS)) < (uint32_t)7UL) ? (uint32_t)0UL : (uint32_t)((PriorityGroupTmp - 7UL) + (uint32_t)(__NVIC_PRIO_BITS)); - - *pPreemptPriority = (Priority >> SubPriorityBits) & (uint32_t)((1UL << (PreemptPriorityBits)) - 1UL); - *pSubPriority = (Priority ) & (uint32_t)((1UL << (SubPriorityBits )) - 1UL); -} - - -/** - \brief Set Interrupt Vector - \details Sets an interrupt vector in SRAM based interrupt vector table. - The interrupt number can be positive to specify a device specific interrupt, - or negative to specify a processor exception. - VTOR must been relocated to SRAM before. - If VTOR is not present address 0 must be mapped to SRAM. - \param [in] IRQn Interrupt number - \param [in] vector Address of interrupt handler function - */ -__STATIC_INLINE void __NVIC_SetVector(IRQn_Type IRQn, uint32_t vector) -{ -#if defined (__VTOR_PRESENT) && (__VTOR_PRESENT == 1U) - uint32_t *vectors = (uint32_t *)SCB->VTOR; -#else - uint32_t *vectors = (uint32_t *)0x0U; -#endif - vectors[(int32_t)IRQn + NVIC_USER_IRQ_OFFSET] = vector; -} - - -/** - \brief Get Interrupt Vector - \details Reads an interrupt vector from interrupt vector table. - The interrupt number can be positive to specify a device specific interrupt, - or negative to specify a processor exception. - \param [in] IRQn Interrupt number. - \return Address of interrupt handler function - */ -__STATIC_INLINE uint32_t __NVIC_GetVector(IRQn_Type IRQn) -{ -#if defined (__VTOR_PRESENT) && (__VTOR_PRESENT == 1U) - uint32_t *vectors = (uint32_t *)SCB->VTOR; -#else - uint32_t *vectors = (uint32_t *)0x0U; -#endif - return vectors[(int32_t)IRQn + NVIC_USER_IRQ_OFFSET]; -} - - -/** - \brief System Reset - \details Initiates a system reset request to reset the MCU. - */ -__NO_RETURN __STATIC_INLINE void __NVIC_SystemReset(void) -{ - __DSB(); /* Ensure all outstanding memory accesses included - buffered write are completed before reset */ - SCB->AIRCR = ((0x5FAUL << SCB_AIRCR_VECTKEY_Pos) | - SCB_AIRCR_SYSRESETREQ_Msk); - __DSB(); /* Ensure completion of memory access */ - - for(;;) /* wait until reset */ - { - __NOP(); - } -} - -#if defined (__ARM_FEATURE_CMSE) && (__ARM_FEATURE_CMSE == 3U) -/** - \brief Enable Interrupt (non-secure) - \details Enables a device specific interrupt in the non-secure NVIC interrupt controller when in secure state. - \param [in] IRQn Device specific interrupt number. - \note IRQn must not be negative. - */ -__STATIC_INLINE void TZ_NVIC_EnableIRQ_NS(IRQn_Type IRQn) -{ - if ((int32_t)(IRQn) >= 0) - { - NVIC_NS->ISER[(((uint32_t)IRQn) >> 5UL)] = (uint32_t)(1UL << (((uint32_t)IRQn) & 0x1FUL)); - } -} - - -/** - \brief Get Interrupt Enable status (non-secure) - \details Returns a device specific interrupt enable status from the non-secure NVIC interrupt controller when in secure state. - \param [in] IRQn Device specific interrupt number. - \return 0 Interrupt is not enabled. - \return 1 Interrupt is enabled. - \note IRQn must not be negative. - */ -__STATIC_INLINE uint32_t TZ_NVIC_GetEnableIRQ_NS(IRQn_Type IRQn) -{ - if ((int32_t)(IRQn) >= 0) - { - return((uint32_t)(((NVIC_NS->ISER[(((uint32_t)IRQn) >> 5UL)] & (1UL << (((uint32_t)IRQn) & 0x1FUL))) != 0UL) ? 1UL : 0UL)); - } - else - { - return(0U); - } -} - - -/** - \brief Disable Interrupt (non-secure) - \details Disables a device specific interrupt in the non-secure NVIC interrupt controller when in secure state. - \param [in] IRQn Device specific interrupt number. - \note IRQn must not be negative. - */ -__STATIC_INLINE void TZ_NVIC_DisableIRQ_NS(IRQn_Type IRQn) -{ - if ((int32_t)(IRQn) >= 0) - { - NVIC_NS->ICER[(((uint32_t)IRQn) >> 5UL)] = (uint32_t)(1UL << (((uint32_t)IRQn) & 0x1FUL)); - } -} - - -/** - \brief Get Pending Interrupt (non-secure) - \details Reads the NVIC pending register in the non-secure NVIC when in secure state and returns the pending bit for the specified device specific interrupt. - \param [in] IRQn Device specific interrupt number. - \return 0 Interrupt status is not pending. - \return 1 Interrupt status is pending. - \note IRQn must not be negative. - */ -__STATIC_INLINE uint32_t TZ_NVIC_GetPendingIRQ_NS(IRQn_Type IRQn) -{ - if ((int32_t)(IRQn) >= 0) - { - return((uint32_t)(((NVIC_NS->ISPR[(((uint32_t)IRQn) >> 5UL)] & (1UL << (((uint32_t)IRQn) & 0x1FUL))) != 0UL) ? 1UL : 0UL)); - } - else - { - return(0U); - } -} - - -/** - \brief Set Pending Interrupt (non-secure) - \details Sets the pending bit of a device specific interrupt in the non-secure NVIC pending register when in secure state. - \param [in] IRQn Device specific interrupt number. - \note IRQn must not be negative. - */ -__STATIC_INLINE void TZ_NVIC_SetPendingIRQ_NS(IRQn_Type IRQn) -{ - if ((int32_t)(IRQn) >= 0) - { - NVIC_NS->ISPR[(((uint32_t)IRQn) >> 5UL)] = (uint32_t)(1UL << (((uint32_t)IRQn) & 0x1FUL)); - } -} - - -/** - \brief Clear Pending Interrupt (non-secure) - \details Clears the pending bit of a device specific interrupt in the non-secure NVIC pending register when in secure state. - \param [in] IRQn Device specific interrupt number. - \note IRQn must not be negative. - */ -__STATIC_INLINE void TZ_NVIC_ClearPendingIRQ_NS(IRQn_Type IRQn) -{ - if ((int32_t)(IRQn) >= 0) - { - NVIC_NS->ICPR[(((uint32_t)IRQn) >> 5UL)] = (uint32_t)(1UL << (((uint32_t)IRQn) & 0x1FUL)); - } -} - - -/** - \brief Get Active Interrupt (non-secure) - \details Reads the active register in non-secure NVIC when in secure state and returns the active bit for the device specific interrupt. - \param [in] IRQn Device specific interrupt number. - \return 0 Interrupt status is not active. - \return 1 Interrupt status is active. - \note IRQn must not be negative. - */ -__STATIC_INLINE uint32_t TZ_NVIC_GetActive_NS(IRQn_Type IRQn) -{ - if ((int32_t)(IRQn) >= 0) - { - return((uint32_t)(((NVIC_NS->IABR[(((uint32_t)IRQn) >> 5UL)] & (1UL << (((uint32_t)IRQn) & 0x1FUL))) != 0UL) ? 1UL : 0UL)); - } - else - { - return(0U); - } -} - - -/** - \brief Set Interrupt Priority (non-secure) - \details Sets the priority of a non-secure device specific interrupt or a non-secure processor exception when in secure state. - The interrupt number can be positive to specify a device specific interrupt, - or negative to specify a processor exception. - \param [in] IRQn Interrupt number. - \param [in] priority Priority to set. - \note The priority cannot be set for every non-secure processor exception. - */ -__STATIC_INLINE void TZ_NVIC_SetPriority_NS(IRQn_Type IRQn, uint32_t priority) -{ - if ((int32_t)(IRQn) >= 0) - { - NVIC_NS->IPR[_IP_IDX(IRQn)] = ((uint32_t)(NVIC_NS->IPR[_IP_IDX(IRQn)] & ~(0xFFUL << _BIT_SHIFT(IRQn))) | - (((priority << (8U - __NVIC_PRIO_BITS)) & (uint32_t)0xFFUL) << _BIT_SHIFT(IRQn))); - } - else - { - SCB_NS->SHPR[_SHP_IDX(IRQn)] = ((uint32_t)(SCB_NS->SHPR[_SHP_IDX(IRQn)] & ~(0xFFUL << _BIT_SHIFT(IRQn))) | - (((priority << (8U - __NVIC_PRIO_BITS)) & (uint32_t)0xFFUL) << _BIT_SHIFT(IRQn))); - } -} - - -/** - \brief Get Interrupt Priority (non-secure) - \details Reads the priority of a non-secure device specific interrupt or a non-secure processor exception when in secure state. - The interrupt number can be positive to specify a device specific interrupt, - or negative to specify a processor exception. - \param [in] IRQn Interrupt number. - \return Interrupt Priority. Value is aligned automatically to the implemented priority bits of the microcontroller. - */ -__STATIC_INLINE uint32_t TZ_NVIC_GetPriority_NS(IRQn_Type IRQn) -{ - - if ((int32_t)(IRQn) >= 0) - { - return((uint32_t)(((NVIC_NS->IPR[ _IP_IDX(IRQn)] >> _BIT_SHIFT(IRQn) ) & (uint32_t)0xFFUL) >> (8U - __NVIC_PRIO_BITS))); - } - else - { - return((uint32_t)(((SCB_NS->SHPR[_SHP_IDX(IRQn)] >> _BIT_SHIFT(IRQn) ) & (uint32_t)0xFFUL) >> (8U - __NVIC_PRIO_BITS))); - } -} -#endif /* defined (__ARM_FEATURE_CMSE) &&(__ARM_FEATURE_CMSE == 3U) */ - -/*@} end of CMSIS_Core_NVICFunctions */ - -/* ########################## MPU functions #################################### */ - -#if defined (__MPU_PRESENT) && (__MPU_PRESENT == 1U) - -#include "mpu_armv8.h" - -#endif - -/* ########################## FPU functions #################################### */ -/** - \ingroup CMSIS_Core_FunctionInterface - \defgroup CMSIS_Core_FpuFunctions FPU Functions - \brief Function that provides FPU type. - @{ - */ - -/** - \brief get FPU type - \details returns the FPU type - \returns - - \b 0: No FPU - - \b 1: Single precision FPU - - \b 2: Double + Single precision FPU - */ -__STATIC_INLINE uint32_t SCB_GetFPUType(void) -{ - return 0U; /* No FPU */ -} - - -/*@} end of CMSIS_Core_FpuFunctions */ - - - -/* ########################## SAU functions #################################### */ -/** - \ingroup CMSIS_Core_FunctionInterface - \defgroup CMSIS_Core_SAUFunctions SAU Functions - \brief Functions that configure the SAU. - @{ - */ - -#if defined (__ARM_FEATURE_CMSE) && (__ARM_FEATURE_CMSE == 3U) - -/** - \brief Enable SAU - \details Enables the Security Attribution Unit (SAU). - */ -__STATIC_INLINE void TZ_SAU_Enable(void) -{ - SAU->CTRL |= (SAU_CTRL_ENABLE_Msk); -} - - - -/** - \brief Disable SAU - \details Disables the Security Attribution Unit (SAU). - */ -__STATIC_INLINE void TZ_SAU_Disable(void) -{ - SAU->CTRL &= ~(SAU_CTRL_ENABLE_Msk); -} - -#endif /* defined (__ARM_FEATURE_CMSE) && (__ARM_FEATURE_CMSE == 3U) */ - -/*@} end of CMSIS_Core_SAUFunctions */ - - - - -/* ################################## SysTick function ############################################ */ -/** - \ingroup CMSIS_Core_FunctionInterface - \defgroup CMSIS_Core_SysTickFunctions SysTick Functions - \brief Functions that configure the System. - @{ - */ - -#if defined (__Vendor_SysTickConfig) && (__Vendor_SysTickConfig == 0U) - -/** - \brief System Tick Configuration - \details Initializes the System Timer and its interrupt, and starts the System Tick Timer. - Counter is in free running mode to generate periodic interrupts. - \param [in] ticks Number of ticks between two interrupts. - \return 0 Function succeeded. - \return 1 Function failed. - \note When the variable __Vendor_SysTickConfig is set to 1, then the - function SysTick_Config is not included. In this case, the file device.h - must contain a vendor-specific implementation of this function. - */ -__STATIC_INLINE uint32_t SysTick_Config(uint32_t ticks) -{ - if ((ticks - 1UL) > SysTick_LOAD_RELOAD_Msk) - { - return (1UL); /* Reload value impossible */ - } - - SysTick->LOAD = (uint32_t)(ticks - 1UL); /* set reload register */ - NVIC_SetPriority (SysTick_IRQn, (1UL << __NVIC_PRIO_BITS) - 1UL); /* set Priority for Systick Interrupt */ - SysTick->VAL = 0UL; /* Load the SysTick Counter Value */ - SysTick->CTRL = SysTick_CTRL_CLKSOURCE_Msk | - SysTick_CTRL_TICKINT_Msk | - SysTick_CTRL_ENABLE_Msk; /* Enable SysTick IRQ and SysTick Timer */ - return (0UL); /* Function successful */ -} - -#if defined (__ARM_FEATURE_CMSE) && (__ARM_FEATURE_CMSE == 3U) -/** - \brief System Tick Configuration (non-secure) - \details Initializes the non-secure System Timer and its interrupt when in secure state, and starts the System Tick Timer. - Counter is in free running mode to generate periodic interrupts. - \param [in] ticks Number of ticks between two interrupts. - \return 0 Function succeeded. - \return 1 Function failed. - \note When the variable __Vendor_SysTickConfig is set to 1, then the - function TZ_SysTick_Config_NS is not included. In this case, the file device.h - must contain a vendor-specific implementation of this function. - - */ -__STATIC_INLINE uint32_t TZ_SysTick_Config_NS(uint32_t ticks) -{ - if ((ticks - 1UL) > SysTick_LOAD_RELOAD_Msk) - { - return (1UL); /* Reload value impossible */ - } - - SysTick_NS->LOAD = (uint32_t)(ticks - 1UL); /* set reload register */ - TZ_NVIC_SetPriority_NS (SysTick_IRQn, (1UL << __NVIC_PRIO_BITS) - 1UL); /* set Priority for Systick Interrupt */ - SysTick_NS->VAL = 0UL; /* Load the SysTick Counter Value */ - SysTick_NS->CTRL = SysTick_CTRL_CLKSOURCE_Msk | - SysTick_CTRL_TICKINT_Msk | - SysTick_CTRL_ENABLE_Msk; /* Enable SysTick IRQ and SysTick Timer */ - return (0UL); /* Function successful */ -} -#endif /* defined (__ARM_FEATURE_CMSE) && (__ARM_FEATURE_CMSE == 3U) */ - -#endif - -/*@} end of CMSIS_Core_SysTickFunctions */ - - - - -#ifdef __cplusplus -} -#endif - -#endif /* __CORE_CM23_H_DEPENDANT */ - -#endif /* __CMSIS_GENERIC */ diff --git a/test_dma/Drivers/CMSIS/Include/core_cm3.h b/test_dma/Drivers/CMSIS/Include/core_cm3.h deleted file mode 100644 index b0dfbd3..0000000 --- a/test_dma/Drivers/CMSIS/Include/core_cm3.h +++ /dev/null @@ -1,1941 +0,0 @@ -/**************************************************************************//** - * @file core_cm3.h - * @brief CMSIS Cortex-M3 Core Peripheral Access Layer Header File - * @version V5.0.8 - * @date 04. June 2018 - ******************************************************************************/ -/* - * Copyright (c) 2009-2018 Arm Limited. All rights reserved. - * - * SPDX-License-Identifier: Apache-2.0 - * - * Licensed under the Apache License, Version 2.0 (the License); you may - * not use this file except in compliance with the License. - * You may obtain a copy of the License at - * - * www.apache.org/licenses/LICENSE-2.0 - * - * Unless required by applicable law or agreed to in writing, software - * distributed under the License is distributed on an AS IS BASIS, WITHOUT - * WARRANTIES OR CONDITIONS OF ANY KIND, either express or implied. - * See the License for the specific language governing permissions and - * limitations under the License. - */ - -#if defined ( __ICCARM__ ) - #pragma system_include /* treat file as system include file for MISRA check */ -#elif defined (__clang__) - #pragma clang system_header /* treat file as system include file */ -#endif - -#ifndef __CORE_CM3_H_GENERIC -#define __CORE_CM3_H_GENERIC - -#include - -#ifdef __cplusplus - extern "C" { -#endif - -/** - \page CMSIS_MISRA_Exceptions MISRA-C:2004 Compliance Exceptions - CMSIS violates the following MISRA-C:2004 rules: - - \li Required Rule 8.5, object/function definition in header file.
- Function definitions in header files are used to allow 'inlining'. - - \li Required Rule 18.4, declaration of union type or object of union type: '{...}'.
- Unions are used for effective representation of core registers. - - \li Advisory Rule 19.7, Function-like macro defined.
- Function-like macros are used to allow more efficient code. - */ - - -/******************************************************************************* - * CMSIS definitions - ******************************************************************************/ -/** - \ingroup Cortex_M3 - @{ - */ - -#include "cmsis_version.h" - -/* CMSIS CM3 definitions */ -#define __CM3_CMSIS_VERSION_MAIN (__CM_CMSIS_VERSION_MAIN) /*!< \deprecated [31:16] CMSIS HAL main version */ -#define __CM3_CMSIS_VERSION_SUB (__CM_CMSIS_VERSION_SUB) /*!< \deprecated [15:0] CMSIS HAL sub version */ -#define __CM3_CMSIS_VERSION ((__CM3_CMSIS_VERSION_MAIN << 16U) | \ - __CM3_CMSIS_VERSION_SUB ) /*!< \deprecated CMSIS HAL version number */ - -#define __CORTEX_M (3U) /*!< Cortex-M Core */ - -/** __FPU_USED indicates whether an FPU is used or not. - This core does not support an FPU at all -*/ -#define __FPU_USED 0U - -#if defined ( __CC_ARM ) - #if defined __TARGET_FPU_VFP - #error "Compiler generates FPU instructions for a device without an FPU (check __FPU_PRESENT)" - #endif - -#elif defined (__ARMCC_VERSION) && (__ARMCC_VERSION >= 6010050) - #if defined __ARM_PCS_VFP - #error "Compiler generates FPU instructions for a device without an FPU (check __FPU_PRESENT)" - #endif - -#elif defined ( __GNUC__ ) - #if defined (__VFP_FP__) && !defined(__SOFTFP__) - #error "Compiler generates FPU instructions for a device without an FPU (check __FPU_PRESENT)" - #endif - -#elif defined ( __ICCARM__ ) - #if defined __ARMVFP__ - #error "Compiler generates FPU instructions for a device without an FPU (check __FPU_PRESENT)" - #endif - -#elif defined ( __TI_ARM__ ) - #if defined __TI_VFP_SUPPORT__ - #error "Compiler generates FPU instructions for a device without an FPU (check __FPU_PRESENT)" - #endif - -#elif defined ( __TASKING__ ) - #if defined __FPU_VFP__ - #error "Compiler generates FPU instructions for a device without an FPU (check __FPU_PRESENT)" - #endif - -#elif defined ( __CSMC__ ) - #if ( __CSMC__ & 0x400U) - #error "Compiler generates FPU instructions for a device without an FPU (check __FPU_PRESENT)" - #endif - -#endif - -#include "cmsis_compiler.h" /* CMSIS compiler specific defines */ - - -#ifdef __cplusplus -} -#endif - -#endif /* __CORE_CM3_H_GENERIC */ - -#ifndef __CMSIS_GENERIC - -#ifndef __CORE_CM3_H_DEPENDANT -#define __CORE_CM3_H_DEPENDANT - -#ifdef __cplusplus - extern "C" { -#endif - -/* check device defines and use defaults */ -#if defined __CHECK_DEVICE_DEFINES - #ifndef __CM3_REV - #define __CM3_REV 0x0200U - #warning "__CM3_REV not defined in device header file; using default!" - #endif - - #ifndef __MPU_PRESENT - #define __MPU_PRESENT 0U - #warning "__MPU_PRESENT not defined in device header file; using default!" - #endif - - #ifndef __NVIC_PRIO_BITS - #define __NVIC_PRIO_BITS 3U - #warning "__NVIC_PRIO_BITS not defined in device header file; using default!" - #endif - - #ifndef __Vendor_SysTickConfig - #define __Vendor_SysTickConfig 0U - #warning "__Vendor_SysTickConfig not defined in device header file; using default!" - #endif -#endif - -/* IO definitions (access restrictions to peripheral registers) */ -/** - \defgroup CMSIS_glob_defs CMSIS Global Defines - - IO Type Qualifiers are used - \li to specify the access to peripheral variables. - \li for automatic generation of peripheral register debug information. -*/ -#ifdef __cplusplus - #define __I volatile /*!< Defines 'read only' permissions */ -#else - #define __I volatile const /*!< Defines 'read only' permissions */ -#endif -#define __O volatile /*!< Defines 'write only' permissions */ -#define __IO volatile /*!< Defines 'read / write' permissions */ - -/* following defines should be used for structure members */ -#define __IM volatile const /*! Defines 'read only' structure member permissions */ -#define __OM volatile /*! Defines 'write only' structure member permissions */ -#define __IOM volatile /*! Defines 'read / write' structure member permissions */ - -/*@} end of group Cortex_M3 */ - - - -/******************************************************************************* - * Register Abstraction - Core Register contain: - - Core Register - - Core NVIC Register - - Core SCB Register - - Core SysTick Register - - Core Debug Register - - Core MPU Register - ******************************************************************************/ -/** - \defgroup CMSIS_core_register Defines and Type Definitions - \brief Type definitions and defines for Cortex-M processor based devices. -*/ - -/** - \ingroup CMSIS_core_register - \defgroup CMSIS_CORE Status and Control Registers - \brief Core Register type definitions. - @{ - */ - -/** - \brief Union type to access the Application Program Status Register (APSR). - */ -typedef union -{ - struct - { - uint32_t _reserved0:27; /*!< bit: 0..26 Reserved */ - uint32_t Q:1; /*!< bit: 27 Saturation condition flag */ - uint32_t V:1; /*!< bit: 28 Overflow condition code flag */ - uint32_t C:1; /*!< bit: 29 Carry condition code flag */ - uint32_t Z:1; /*!< bit: 30 Zero condition code flag */ - uint32_t N:1; /*!< bit: 31 Negative condition code flag */ - } b; /*!< Structure used for bit access */ - uint32_t w; /*!< Type used for word access */ -} APSR_Type; - -/* APSR Register Definitions */ -#define APSR_N_Pos 31U /*!< APSR: N Position */ -#define APSR_N_Msk (1UL << APSR_N_Pos) /*!< APSR: N Mask */ - -#define APSR_Z_Pos 30U /*!< APSR: Z Position */ -#define APSR_Z_Msk (1UL << APSR_Z_Pos) /*!< APSR: Z Mask */ - -#define APSR_C_Pos 29U /*!< APSR: C Position */ -#define APSR_C_Msk (1UL << APSR_C_Pos) /*!< APSR: C Mask */ - -#define APSR_V_Pos 28U /*!< APSR: V Position */ -#define APSR_V_Msk (1UL << APSR_V_Pos) /*!< APSR: V Mask */ - -#define APSR_Q_Pos 27U /*!< APSR: Q Position */ -#define APSR_Q_Msk (1UL << APSR_Q_Pos) /*!< APSR: Q Mask */ - - -/** - \brief Union type to access the Interrupt Program Status Register (IPSR). - */ -typedef union -{ - struct - { - uint32_t ISR:9; /*!< bit: 0.. 8 Exception number */ - uint32_t _reserved0:23; /*!< bit: 9..31 Reserved */ - } b; /*!< Structure used for bit access */ - uint32_t w; /*!< Type used for word access */ -} IPSR_Type; - -/* IPSR Register Definitions */ -#define IPSR_ISR_Pos 0U /*!< IPSR: ISR Position */ -#define IPSR_ISR_Msk (0x1FFUL /*<< IPSR_ISR_Pos*/) /*!< IPSR: ISR Mask */ - - -/** - \brief Union type to access the Special-Purpose Program Status Registers (xPSR). - */ -typedef union -{ - struct - { - uint32_t ISR:9; /*!< bit: 0.. 8 Exception number */ - uint32_t _reserved0:1; /*!< bit: 9 Reserved */ - uint32_t ICI_IT_1:6; /*!< bit: 10..15 ICI/IT part 1 */ - uint32_t _reserved1:8; /*!< bit: 16..23 Reserved */ - uint32_t T:1; /*!< bit: 24 Thumb bit */ - uint32_t ICI_IT_2:2; /*!< bit: 25..26 ICI/IT part 2 */ - uint32_t Q:1; /*!< bit: 27 Saturation condition flag */ - uint32_t V:1; /*!< bit: 28 Overflow condition code flag */ - uint32_t C:1; /*!< bit: 29 Carry condition code flag */ - uint32_t Z:1; /*!< bit: 30 Zero condition code flag */ - uint32_t N:1; /*!< bit: 31 Negative condition code flag */ - } b; /*!< Structure used for bit access */ - uint32_t w; /*!< Type used for word access */ -} xPSR_Type; - -/* xPSR Register Definitions */ -#define xPSR_N_Pos 31U /*!< xPSR: N Position */ -#define xPSR_N_Msk (1UL << xPSR_N_Pos) /*!< xPSR: N Mask */ - -#define xPSR_Z_Pos 30U /*!< xPSR: Z Position */ -#define xPSR_Z_Msk (1UL << xPSR_Z_Pos) /*!< xPSR: Z Mask */ - -#define xPSR_C_Pos 29U /*!< xPSR: C Position */ -#define xPSR_C_Msk (1UL << xPSR_C_Pos) /*!< xPSR: C Mask */ - -#define xPSR_V_Pos 28U /*!< xPSR: V Position */ -#define xPSR_V_Msk (1UL << xPSR_V_Pos) /*!< xPSR: V Mask */ - -#define xPSR_Q_Pos 27U /*!< xPSR: Q Position */ -#define xPSR_Q_Msk (1UL << xPSR_Q_Pos) /*!< xPSR: Q Mask */ - -#define xPSR_ICI_IT_2_Pos 25U /*!< xPSR: ICI/IT part 2 Position */ -#define xPSR_ICI_IT_2_Msk (3UL << xPSR_ICI_IT_2_Pos) /*!< xPSR: ICI/IT part 2 Mask */ - -#define xPSR_T_Pos 24U /*!< xPSR: T Position */ -#define xPSR_T_Msk (1UL << xPSR_T_Pos) /*!< xPSR: T Mask */ - -#define xPSR_ICI_IT_1_Pos 10U /*!< xPSR: ICI/IT part 1 Position */ -#define xPSR_ICI_IT_1_Msk (0x3FUL << xPSR_ICI_IT_1_Pos) /*!< xPSR: ICI/IT part 1 Mask */ - -#define xPSR_ISR_Pos 0U /*!< xPSR: ISR Position */ -#define xPSR_ISR_Msk (0x1FFUL /*<< xPSR_ISR_Pos*/) /*!< xPSR: ISR Mask */ - - -/** - \brief Union type to access the Control Registers (CONTROL). - */ -typedef union -{ - struct - { - uint32_t nPRIV:1; /*!< bit: 0 Execution privilege in Thread mode */ - uint32_t SPSEL:1; /*!< bit: 1 Stack to be used */ - uint32_t _reserved1:30; /*!< bit: 2..31 Reserved */ - } b; /*!< Structure used for bit access */ - uint32_t w; /*!< Type used for word access */ -} CONTROL_Type; - -/* CONTROL Register Definitions */ -#define CONTROL_SPSEL_Pos 1U /*!< CONTROL: SPSEL Position */ -#define CONTROL_SPSEL_Msk (1UL << CONTROL_SPSEL_Pos) /*!< CONTROL: SPSEL Mask */ - -#define CONTROL_nPRIV_Pos 0U /*!< CONTROL: nPRIV Position */ -#define CONTROL_nPRIV_Msk (1UL /*<< CONTROL_nPRIV_Pos*/) /*!< CONTROL: nPRIV Mask */ - -/*@} end of group CMSIS_CORE */ - - -/** - \ingroup CMSIS_core_register - \defgroup CMSIS_NVIC Nested Vectored Interrupt Controller (NVIC) - \brief Type definitions for the NVIC Registers - @{ - */ - -/** - \brief Structure type to access the Nested Vectored Interrupt Controller (NVIC). - */ -typedef struct -{ - __IOM uint32_t ISER[8U]; /*!< Offset: 0x000 (R/W) Interrupt Set Enable Register */ - uint32_t RESERVED0[24U]; - __IOM uint32_t ICER[8U]; /*!< Offset: 0x080 (R/W) Interrupt Clear Enable Register */ - uint32_t RSERVED1[24U]; - __IOM uint32_t ISPR[8U]; /*!< Offset: 0x100 (R/W) Interrupt Set Pending Register */ - uint32_t RESERVED2[24U]; - __IOM uint32_t ICPR[8U]; /*!< Offset: 0x180 (R/W) Interrupt Clear Pending Register */ - uint32_t RESERVED3[24U]; - __IOM uint32_t IABR[8U]; /*!< Offset: 0x200 (R/W) Interrupt Active bit Register */ - uint32_t RESERVED4[56U]; - __IOM uint8_t IP[240U]; /*!< Offset: 0x300 (R/W) Interrupt Priority Register (8Bit wide) */ - uint32_t RESERVED5[644U]; - __OM uint32_t STIR; /*!< Offset: 0xE00 ( /W) Software Trigger Interrupt Register */ -} NVIC_Type; - -/* Software Triggered Interrupt Register Definitions */ -#define NVIC_STIR_INTID_Pos 0U /*!< STIR: INTLINESNUM Position */ -#define NVIC_STIR_INTID_Msk (0x1FFUL /*<< NVIC_STIR_INTID_Pos*/) /*!< STIR: INTLINESNUM Mask */ - -/*@} end of group CMSIS_NVIC */ - - -/** - \ingroup CMSIS_core_register - \defgroup CMSIS_SCB System Control Block (SCB) - \brief Type definitions for the System Control Block Registers - @{ - */ - -/** - \brief Structure type to access the System Control Block (SCB). - */ -typedef struct -{ - __IM uint32_t CPUID; /*!< Offset: 0x000 (R/ ) CPUID Base Register */ - __IOM uint32_t ICSR; /*!< Offset: 0x004 (R/W) Interrupt Control and State Register */ - __IOM uint32_t VTOR; /*!< Offset: 0x008 (R/W) Vector Table Offset Register */ - __IOM uint32_t AIRCR; /*!< Offset: 0x00C (R/W) Application Interrupt and Reset Control Register */ - __IOM uint32_t SCR; /*!< Offset: 0x010 (R/W) System Control Register */ - __IOM uint32_t CCR; /*!< Offset: 0x014 (R/W) Configuration Control Register */ - __IOM uint8_t SHP[12U]; /*!< Offset: 0x018 (R/W) System Handlers Priority Registers (4-7, 8-11, 12-15) */ - __IOM uint32_t SHCSR; /*!< Offset: 0x024 (R/W) System Handler Control and State Register */ - __IOM uint32_t CFSR; /*!< Offset: 0x028 (R/W) Configurable Fault Status Register */ - __IOM uint32_t HFSR; /*!< Offset: 0x02C (R/W) HardFault Status Register */ - __IOM uint32_t DFSR; /*!< Offset: 0x030 (R/W) Debug Fault Status Register */ - __IOM uint32_t MMFAR; /*!< Offset: 0x034 (R/W) MemManage Fault Address Register */ - __IOM uint32_t BFAR; /*!< Offset: 0x038 (R/W) BusFault Address Register */ - __IOM uint32_t AFSR; /*!< Offset: 0x03C (R/W) Auxiliary Fault Status Register */ - __IM uint32_t PFR[2U]; /*!< Offset: 0x040 (R/ ) Processor Feature Register */ - __IM uint32_t DFR; /*!< Offset: 0x048 (R/ ) Debug Feature Register */ - __IM uint32_t ADR; /*!< Offset: 0x04C (R/ ) Auxiliary Feature Register */ - __IM uint32_t MMFR[4U]; /*!< Offset: 0x050 (R/ ) Memory Model Feature Register */ - __IM uint32_t ISAR[5U]; /*!< Offset: 0x060 (R/ ) Instruction Set Attributes Register */ - uint32_t RESERVED0[5U]; - __IOM uint32_t CPACR; /*!< Offset: 0x088 (R/W) Coprocessor Access Control Register */ -} SCB_Type; - -/* SCB CPUID Register Definitions */ -#define SCB_CPUID_IMPLEMENTER_Pos 24U /*!< SCB CPUID: IMPLEMENTER Position */ -#define SCB_CPUID_IMPLEMENTER_Msk (0xFFUL << SCB_CPUID_IMPLEMENTER_Pos) /*!< SCB CPUID: IMPLEMENTER Mask */ - -#define SCB_CPUID_VARIANT_Pos 20U /*!< SCB CPUID: VARIANT Position */ -#define SCB_CPUID_VARIANT_Msk (0xFUL << SCB_CPUID_VARIANT_Pos) /*!< SCB CPUID: VARIANT Mask */ - -#define SCB_CPUID_ARCHITECTURE_Pos 16U /*!< SCB CPUID: ARCHITECTURE Position */ -#define SCB_CPUID_ARCHITECTURE_Msk (0xFUL << SCB_CPUID_ARCHITECTURE_Pos) /*!< SCB CPUID: ARCHITECTURE Mask */ - -#define SCB_CPUID_PARTNO_Pos 4U /*!< SCB CPUID: PARTNO Position */ -#define SCB_CPUID_PARTNO_Msk (0xFFFUL << SCB_CPUID_PARTNO_Pos) /*!< SCB CPUID: PARTNO Mask */ - -#define SCB_CPUID_REVISION_Pos 0U /*!< SCB CPUID: REVISION Position */ -#define SCB_CPUID_REVISION_Msk (0xFUL /*<< SCB_CPUID_REVISION_Pos*/) /*!< SCB CPUID: REVISION Mask */ - -/* SCB Interrupt Control State Register Definitions */ -#define SCB_ICSR_NMIPENDSET_Pos 31U /*!< SCB ICSR: NMIPENDSET Position */ -#define SCB_ICSR_NMIPENDSET_Msk (1UL << SCB_ICSR_NMIPENDSET_Pos) /*!< SCB ICSR: NMIPENDSET Mask */ - -#define SCB_ICSR_PENDSVSET_Pos 28U /*!< SCB ICSR: PENDSVSET Position */ -#define SCB_ICSR_PENDSVSET_Msk (1UL << SCB_ICSR_PENDSVSET_Pos) /*!< SCB ICSR: PENDSVSET Mask */ - -#define SCB_ICSR_PENDSVCLR_Pos 27U /*!< SCB ICSR: PENDSVCLR Position */ -#define SCB_ICSR_PENDSVCLR_Msk (1UL << SCB_ICSR_PENDSVCLR_Pos) /*!< SCB ICSR: PENDSVCLR Mask */ - -#define SCB_ICSR_PENDSTSET_Pos 26U /*!< SCB ICSR: PENDSTSET Position */ -#define SCB_ICSR_PENDSTSET_Msk (1UL << SCB_ICSR_PENDSTSET_Pos) /*!< SCB ICSR: PENDSTSET Mask */ - -#define SCB_ICSR_PENDSTCLR_Pos 25U /*!< SCB ICSR: PENDSTCLR Position */ -#define SCB_ICSR_PENDSTCLR_Msk (1UL << SCB_ICSR_PENDSTCLR_Pos) /*!< SCB ICSR: PENDSTCLR Mask */ - -#define SCB_ICSR_ISRPREEMPT_Pos 23U /*!< SCB ICSR: ISRPREEMPT Position */ -#define SCB_ICSR_ISRPREEMPT_Msk (1UL << SCB_ICSR_ISRPREEMPT_Pos) /*!< SCB ICSR: ISRPREEMPT Mask */ - -#define SCB_ICSR_ISRPENDING_Pos 22U /*!< SCB ICSR: ISRPENDING Position */ -#define SCB_ICSR_ISRPENDING_Msk (1UL << SCB_ICSR_ISRPENDING_Pos) /*!< SCB ICSR: ISRPENDING Mask */ - -#define SCB_ICSR_VECTPENDING_Pos 12U /*!< SCB ICSR: VECTPENDING Position */ -#define SCB_ICSR_VECTPENDING_Msk (0x1FFUL << SCB_ICSR_VECTPENDING_Pos) /*!< SCB ICSR: VECTPENDING Mask */ - -#define SCB_ICSR_RETTOBASE_Pos 11U /*!< SCB ICSR: RETTOBASE Position */ -#define SCB_ICSR_RETTOBASE_Msk (1UL << SCB_ICSR_RETTOBASE_Pos) /*!< SCB ICSR: RETTOBASE Mask */ - -#define SCB_ICSR_VECTACTIVE_Pos 0U /*!< SCB ICSR: VECTACTIVE Position */ -#define SCB_ICSR_VECTACTIVE_Msk (0x1FFUL /*<< SCB_ICSR_VECTACTIVE_Pos*/) /*!< SCB ICSR: VECTACTIVE Mask */ - -/* SCB Vector Table Offset Register Definitions */ -#if defined (__CM3_REV) && (__CM3_REV < 0x0201U) /* core r2p1 */ -#define SCB_VTOR_TBLBASE_Pos 29U /*!< SCB VTOR: TBLBASE Position */ -#define SCB_VTOR_TBLBASE_Msk (1UL << SCB_VTOR_TBLBASE_Pos) /*!< SCB VTOR: TBLBASE Mask */ - -#define SCB_VTOR_TBLOFF_Pos 7U /*!< SCB VTOR: TBLOFF Position */ -#define SCB_VTOR_TBLOFF_Msk (0x3FFFFFUL << SCB_VTOR_TBLOFF_Pos) /*!< SCB VTOR: TBLOFF Mask */ -#else -#define SCB_VTOR_TBLOFF_Pos 7U /*!< SCB VTOR: TBLOFF Position */ -#define SCB_VTOR_TBLOFF_Msk (0x1FFFFFFUL << SCB_VTOR_TBLOFF_Pos) /*!< SCB VTOR: TBLOFF Mask */ -#endif - -/* SCB Application Interrupt and Reset Control Register Definitions */ -#define SCB_AIRCR_VECTKEY_Pos 16U /*!< SCB AIRCR: VECTKEY Position */ -#define SCB_AIRCR_VECTKEY_Msk (0xFFFFUL << SCB_AIRCR_VECTKEY_Pos) /*!< SCB AIRCR: VECTKEY Mask */ - -#define SCB_AIRCR_VECTKEYSTAT_Pos 16U /*!< SCB AIRCR: VECTKEYSTAT Position */ -#define SCB_AIRCR_VECTKEYSTAT_Msk (0xFFFFUL << SCB_AIRCR_VECTKEYSTAT_Pos) /*!< SCB AIRCR: VECTKEYSTAT Mask */ - -#define SCB_AIRCR_ENDIANESS_Pos 15U /*!< SCB AIRCR: ENDIANESS Position */ -#define SCB_AIRCR_ENDIANESS_Msk (1UL << SCB_AIRCR_ENDIANESS_Pos) /*!< SCB AIRCR: ENDIANESS Mask */ - -#define SCB_AIRCR_PRIGROUP_Pos 8U /*!< SCB AIRCR: PRIGROUP Position */ -#define SCB_AIRCR_PRIGROUP_Msk (7UL << SCB_AIRCR_PRIGROUP_Pos) /*!< SCB AIRCR: PRIGROUP Mask */ - -#define SCB_AIRCR_SYSRESETREQ_Pos 2U /*!< SCB AIRCR: SYSRESETREQ Position */ -#define SCB_AIRCR_SYSRESETREQ_Msk (1UL << SCB_AIRCR_SYSRESETREQ_Pos) /*!< SCB AIRCR: SYSRESETREQ Mask */ - -#define SCB_AIRCR_VECTCLRACTIVE_Pos 1U /*!< SCB AIRCR: VECTCLRACTIVE Position */ -#define SCB_AIRCR_VECTCLRACTIVE_Msk (1UL << SCB_AIRCR_VECTCLRACTIVE_Pos) /*!< SCB AIRCR: VECTCLRACTIVE Mask */ - -#define SCB_AIRCR_VECTRESET_Pos 0U /*!< SCB AIRCR: VECTRESET Position */ -#define SCB_AIRCR_VECTRESET_Msk (1UL /*<< SCB_AIRCR_VECTRESET_Pos*/) /*!< SCB AIRCR: VECTRESET Mask */ - -/* SCB System Control Register Definitions */ -#define SCB_SCR_SEVONPEND_Pos 4U /*!< SCB SCR: SEVONPEND Position */ -#define SCB_SCR_SEVONPEND_Msk (1UL << SCB_SCR_SEVONPEND_Pos) /*!< SCB SCR: SEVONPEND Mask */ - -#define SCB_SCR_SLEEPDEEP_Pos 2U /*!< SCB SCR: SLEEPDEEP Position */ -#define SCB_SCR_SLEEPDEEP_Msk (1UL << SCB_SCR_SLEEPDEEP_Pos) /*!< SCB SCR: SLEEPDEEP Mask */ - -#define SCB_SCR_SLEEPONEXIT_Pos 1U /*!< SCB SCR: SLEEPONEXIT Position */ -#define SCB_SCR_SLEEPONEXIT_Msk (1UL << SCB_SCR_SLEEPONEXIT_Pos) /*!< SCB SCR: SLEEPONEXIT Mask */ - -/* SCB Configuration Control Register Definitions */ -#define SCB_CCR_STKALIGN_Pos 9U /*!< SCB CCR: STKALIGN Position */ -#define SCB_CCR_STKALIGN_Msk (1UL << SCB_CCR_STKALIGN_Pos) /*!< SCB CCR: STKALIGN Mask */ - -#define SCB_CCR_BFHFNMIGN_Pos 8U /*!< SCB CCR: BFHFNMIGN Position */ -#define SCB_CCR_BFHFNMIGN_Msk (1UL << SCB_CCR_BFHFNMIGN_Pos) /*!< SCB CCR: BFHFNMIGN Mask */ - -#define SCB_CCR_DIV_0_TRP_Pos 4U /*!< SCB CCR: DIV_0_TRP Position */ -#define SCB_CCR_DIV_0_TRP_Msk (1UL << SCB_CCR_DIV_0_TRP_Pos) /*!< SCB CCR: DIV_0_TRP Mask */ - -#define SCB_CCR_UNALIGN_TRP_Pos 3U /*!< SCB CCR: UNALIGN_TRP Position */ -#define SCB_CCR_UNALIGN_TRP_Msk (1UL << SCB_CCR_UNALIGN_TRP_Pos) /*!< SCB CCR: UNALIGN_TRP Mask */ - -#define SCB_CCR_USERSETMPEND_Pos 1U /*!< SCB CCR: USERSETMPEND Position */ -#define SCB_CCR_USERSETMPEND_Msk (1UL << SCB_CCR_USERSETMPEND_Pos) /*!< SCB CCR: USERSETMPEND Mask */ - -#define SCB_CCR_NONBASETHRDENA_Pos 0U /*!< SCB CCR: NONBASETHRDENA Position */ -#define SCB_CCR_NONBASETHRDENA_Msk (1UL /*<< SCB_CCR_NONBASETHRDENA_Pos*/) /*!< SCB CCR: NONBASETHRDENA Mask */ - -/* SCB System Handler Control and State Register Definitions */ -#define SCB_SHCSR_USGFAULTENA_Pos 18U /*!< SCB SHCSR: USGFAULTENA Position */ -#define SCB_SHCSR_USGFAULTENA_Msk (1UL << SCB_SHCSR_USGFAULTENA_Pos) /*!< SCB SHCSR: USGFAULTENA Mask */ - -#define SCB_SHCSR_BUSFAULTENA_Pos 17U /*!< SCB SHCSR: BUSFAULTENA Position */ -#define SCB_SHCSR_BUSFAULTENA_Msk (1UL << SCB_SHCSR_BUSFAULTENA_Pos) /*!< SCB SHCSR: BUSFAULTENA Mask */ - -#define SCB_SHCSR_MEMFAULTENA_Pos 16U /*!< SCB SHCSR: MEMFAULTENA Position */ -#define SCB_SHCSR_MEMFAULTENA_Msk (1UL << SCB_SHCSR_MEMFAULTENA_Pos) /*!< SCB SHCSR: MEMFAULTENA Mask */ - -#define SCB_SHCSR_SVCALLPENDED_Pos 15U /*!< SCB SHCSR: SVCALLPENDED Position */ -#define SCB_SHCSR_SVCALLPENDED_Msk (1UL << SCB_SHCSR_SVCALLPENDED_Pos) /*!< SCB SHCSR: SVCALLPENDED Mask */ - -#define SCB_SHCSR_BUSFAULTPENDED_Pos 14U /*!< SCB SHCSR: BUSFAULTPENDED Position */ -#define SCB_SHCSR_BUSFAULTPENDED_Msk (1UL << SCB_SHCSR_BUSFAULTPENDED_Pos) /*!< SCB SHCSR: BUSFAULTPENDED Mask */ - -#define SCB_SHCSR_MEMFAULTPENDED_Pos 13U /*!< SCB SHCSR: MEMFAULTPENDED Position */ -#define SCB_SHCSR_MEMFAULTPENDED_Msk (1UL << SCB_SHCSR_MEMFAULTPENDED_Pos) /*!< SCB SHCSR: MEMFAULTPENDED Mask */ - -#define SCB_SHCSR_USGFAULTPENDED_Pos 12U /*!< SCB SHCSR: USGFAULTPENDED Position */ -#define SCB_SHCSR_USGFAULTPENDED_Msk (1UL << SCB_SHCSR_USGFAULTPENDED_Pos) /*!< SCB SHCSR: USGFAULTPENDED Mask */ - -#define SCB_SHCSR_SYSTICKACT_Pos 11U /*!< SCB SHCSR: SYSTICKACT Position */ -#define SCB_SHCSR_SYSTICKACT_Msk (1UL << SCB_SHCSR_SYSTICKACT_Pos) /*!< SCB SHCSR: SYSTICKACT Mask */ - -#define SCB_SHCSR_PENDSVACT_Pos 10U /*!< SCB SHCSR: PENDSVACT Position */ -#define SCB_SHCSR_PENDSVACT_Msk (1UL << SCB_SHCSR_PENDSVACT_Pos) /*!< SCB SHCSR: PENDSVACT Mask */ - -#define SCB_SHCSR_MONITORACT_Pos 8U /*!< SCB SHCSR: MONITORACT Position */ -#define SCB_SHCSR_MONITORACT_Msk (1UL << SCB_SHCSR_MONITORACT_Pos) /*!< SCB SHCSR: MONITORACT Mask */ - -#define SCB_SHCSR_SVCALLACT_Pos 7U /*!< SCB SHCSR: SVCALLACT Position */ -#define SCB_SHCSR_SVCALLACT_Msk (1UL << SCB_SHCSR_SVCALLACT_Pos) /*!< SCB SHCSR: SVCALLACT Mask */ - -#define SCB_SHCSR_USGFAULTACT_Pos 3U /*!< SCB SHCSR: USGFAULTACT Position */ -#define SCB_SHCSR_USGFAULTACT_Msk (1UL << SCB_SHCSR_USGFAULTACT_Pos) /*!< SCB SHCSR: USGFAULTACT Mask */ - -#define SCB_SHCSR_BUSFAULTACT_Pos 1U /*!< SCB SHCSR: BUSFAULTACT Position */ -#define SCB_SHCSR_BUSFAULTACT_Msk (1UL << SCB_SHCSR_BUSFAULTACT_Pos) /*!< SCB SHCSR: BUSFAULTACT Mask */ - -#define SCB_SHCSR_MEMFAULTACT_Pos 0U /*!< SCB SHCSR: MEMFAULTACT Position */ -#define SCB_SHCSR_MEMFAULTACT_Msk (1UL /*<< SCB_SHCSR_MEMFAULTACT_Pos*/) /*!< SCB SHCSR: MEMFAULTACT Mask */ - -/* SCB Configurable Fault Status Register Definitions */ -#define SCB_CFSR_USGFAULTSR_Pos 16U /*!< SCB CFSR: Usage Fault Status Register Position */ -#define SCB_CFSR_USGFAULTSR_Msk (0xFFFFUL << SCB_CFSR_USGFAULTSR_Pos) /*!< SCB CFSR: Usage Fault Status Register Mask */ - -#define SCB_CFSR_BUSFAULTSR_Pos 8U /*!< SCB CFSR: Bus Fault Status Register Position */ -#define SCB_CFSR_BUSFAULTSR_Msk (0xFFUL << SCB_CFSR_BUSFAULTSR_Pos) /*!< SCB CFSR: Bus Fault Status Register Mask */ - -#define SCB_CFSR_MEMFAULTSR_Pos 0U /*!< SCB CFSR: Memory Manage Fault Status Register Position */ -#define SCB_CFSR_MEMFAULTSR_Msk (0xFFUL /*<< SCB_CFSR_MEMFAULTSR_Pos*/) /*!< SCB CFSR: Memory Manage Fault Status Register Mask */ - -/* MemManage Fault Status Register (part of SCB Configurable Fault Status Register) */ -#define SCB_CFSR_MMARVALID_Pos (SCB_SHCSR_MEMFAULTACT_Pos + 7U) /*!< SCB CFSR (MMFSR): MMARVALID Position */ -#define SCB_CFSR_MMARVALID_Msk (1UL << SCB_CFSR_MMARVALID_Pos) /*!< SCB CFSR (MMFSR): MMARVALID Mask */ - -#define SCB_CFSR_MSTKERR_Pos (SCB_SHCSR_MEMFAULTACT_Pos + 4U) /*!< SCB CFSR (MMFSR): MSTKERR Position */ -#define SCB_CFSR_MSTKERR_Msk (1UL << SCB_CFSR_MSTKERR_Pos) /*!< SCB CFSR (MMFSR): MSTKERR Mask */ - -#define SCB_CFSR_MUNSTKERR_Pos (SCB_SHCSR_MEMFAULTACT_Pos + 3U) /*!< SCB CFSR (MMFSR): MUNSTKERR Position */ -#define SCB_CFSR_MUNSTKERR_Msk (1UL << SCB_CFSR_MUNSTKERR_Pos) /*!< SCB CFSR (MMFSR): MUNSTKERR Mask */ - -#define SCB_CFSR_DACCVIOL_Pos (SCB_SHCSR_MEMFAULTACT_Pos + 1U) /*!< SCB CFSR (MMFSR): DACCVIOL Position */ -#define SCB_CFSR_DACCVIOL_Msk (1UL << SCB_CFSR_DACCVIOL_Pos) /*!< SCB CFSR (MMFSR): DACCVIOL Mask */ - -#define SCB_CFSR_IACCVIOL_Pos (SCB_SHCSR_MEMFAULTACT_Pos + 0U) /*!< SCB CFSR (MMFSR): IACCVIOL Position */ -#define SCB_CFSR_IACCVIOL_Msk (1UL /*<< SCB_CFSR_IACCVIOL_Pos*/) /*!< SCB CFSR (MMFSR): IACCVIOL Mask */ - -/* BusFault Status Register (part of SCB Configurable Fault Status Register) */ -#define SCB_CFSR_BFARVALID_Pos (SCB_CFSR_BUSFAULTSR_Pos + 7U) /*!< SCB CFSR (BFSR): BFARVALID Position */ -#define SCB_CFSR_BFARVALID_Msk (1UL << SCB_CFSR_BFARVALID_Pos) /*!< SCB CFSR (BFSR): BFARVALID Mask */ - -#define SCB_CFSR_STKERR_Pos (SCB_CFSR_BUSFAULTSR_Pos + 4U) /*!< SCB CFSR (BFSR): STKERR Position */ -#define SCB_CFSR_STKERR_Msk (1UL << SCB_CFSR_STKERR_Pos) /*!< SCB CFSR (BFSR): STKERR Mask */ - -#define SCB_CFSR_UNSTKERR_Pos (SCB_CFSR_BUSFAULTSR_Pos + 3U) /*!< SCB CFSR (BFSR): UNSTKERR Position */ -#define SCB_CFSR_UNSTKERR_Msk (1UL << SCB_CFSR_UNSTKERR_Pos) /*!< SCB CFSR (BFSR): UNSTKERR Mask */ - -#define SCB_CFSR_IMPRECISERR_Pos (SCB_CFSR_BUSFAULTSR_Pos + 2U) /*!< SCB CFSR (BFSR): IMPRECISERR Position */ -#define SCB_CFSR_IMPRECISERR_Msk (1UL << SCB_CFSR_IMPRECISERR_Pos) /*!< SCB CFSR (BFSR): IMPRECISERR Mask */ - -#define SCB_CFSR_PRECISERR_Pos (SCB_CFSR_BUSFAULTSR_Pos + 1U) /*!< SCB CFSR (BFSR): PRECISERR Position */ -#define SCB_CFSR_PRECISERR_Msk (1UL << SCB_CFSR_PRECISERR_Pos) /*!< SCB CFSR (BFSR): PRECISERR Mask */ - -#define SCB_CFSR_IBUSERR_Pos (SCB_CFSR_BUSFAULTSR_Pos + 0U) /*!< SCB CFSR (BFSR): IBUSERR Position */ -#define SCB_CFSR_IBUSERR_Msk (1UL << SCB_CFSR_IBUSERR_Pos) /*!< SCB CFSR (BFSR): IBUSERR Mask */ - -/* UsageFault Status Register (part of SCB Configurable Fault Status Register) */ -#define SCB_CFSR_DIVBYZERO_Pos (SCB_CFSR_USGFAULTSR_Pos + 9U) /*!< SCB CFSR (UFSR): DIVBYZERO Position */ -#define SCB_CFSR_DIVBYZERO_Msk (1UL << SCB_CFSR_DIVBYZERO_Pos) /*!< SCB CFSR (UFSR): DIVBYZERO Mask */ - -#define SCB_CFSR_UNALIGNED_Pos (SCB_CFSR_USGFAULTSR_Pos + 8U) /*!< SCB CFSR (UFSR): UNALIGNED Position */ -#define SCB_CFSR_UNALIGNED_Msk (1UL << SCB_CFSR_UNALIGNED_Pos) /*!< SCB CFSR (UFSR): UNALIGNED Mask */ - -#define SCB_CFSR_NOCP_Pos (SCB_CFSR_USGFAULTSR_Pos + 3U) /*!< SCB CFSR (UFSR): NOCP Position */ -#define SCB_CFSR_NOCP_Msk (1UL << SCB_CFSR_NOCP_Pos) /*!< SCB CFSR (UFSR): NOCP Mask */ - -#define SCB_CFSR_INVPC_Pos (SCB_CFSR_USGFAULTSR_Pos + 2U) /*!< SCB CFSR (UFSR): INVPC Position */ -#define SCB_CFSR_INVPC_Msk (1UL << SCB_CFSR_INVPC_Pos) /*!< SCB CFSR (UFSR): INVPC Mask */ - -#define SCB_CFSR_INVSTATE_Pos (SCB_CFSR_USGFAULTSR_Pos + 1U) /*!< SCB CFSR (UFSR): INVSTATE Position */ -#define SCB_CFSR_INVSTATE_Msk (1UL << SCB_CFSR_INVSTATE_Pos) /*!< SCB CFSR (UFSR): INVSTATE Mask */ - -#define SCB_CFSR_UNDEFINSTR_Pos (SCB_CFSR_USGFAULTSR_Pos + 0U) /*!< SCB CFSR (UFSR): UNDEFINSTR Position */ -#define SCB_CFSR_UNDEFINSTR_Msk (1UL << SCB_CFSR_UNDEFINSTR_Pos) /*!< SCB CFSR (UFSR): UNDEFINSTR Mask */ - -/* SCB Hard Fault Status Register Definitions */ -#define SCB_HFSR_DEBUGEVT_Pos 31U /*!< SCB HFSR: DEBUGEVT Position */ -#define SCB_HFSR_DEBUGEVT_Msk (1UL << SCB_HFSR_DEBUGEVT_Pos) /*!< SCB HFSR: DEBUGEVT Mask */ - -#define SCB_HFSR_FORCED_Pos 30U /*!< SCB HFSR: FORCED Position */ -#define SCB_HFSR_FORCED_Msk (1UL << SCB_HFSR_FORCED_Pos) /*!< SCB HFSR: FORCED Mask */ - -#define SCB_HFSR_VECTTBL_Pos 1U /*!< SCB HFSR: VECTTBL Position */ -#define SCB_HFSR_VECTTBL_Msk (1UL << SCB_HFSR_VECTTBL_Pos) /*!< SCB HFSR: VECTTBL Mask */ - -/* SCB Debug Fault Status Register Definitions */ -#define SCB_DFSR_EXTERNAL_Pos 4U /*!< SCB DFSR: EXTERNAL Position */ -#define SCB_DFSR_EXTERNAL_Msk (1UL << SCB_DFSR_EXTERNAL_Pos) /*!< SCB DFSR: EXTERNAL Mask */ - -#define SCB_DFSR_VCATCH_Pos 3U /*!< SCB DFSR: VCATCH Position */ -#define SCB_DFSR_VCATCH_Msk (1UL << SCB_DFSR_VCATCH_Pos) /*!< SCB DFSR: VCATCH Mask */ - -#define SCB_DFSR_DWTTRAP_Pos 2U /*!< SCB DFSR: DWTTRAP Position */ -#define SCB_DFSR_DWTTRAP_Msk (1UL << SCB_DFSR_DWTTRAP_Pos) /*!< SCB DFSR: DWTTRAP Mask */ - -#define SCB_DFSR_BKPT_Pos 1U /*!< SCB DFSR: BKPT Position */ -#define SCB_DFSR_BKPT_Msk (1UL << SCB_DFSR_BKPT_Pos) /*!< SCB DFSR: BKPT Mask */ - -#define SCB_DFSR_HALTED_Pos 0U /*!< SCB DFSR: HALTED Position */ -#define SCB_DFSR_HALTED_Msk (1UL /*<< SCB_DFSR_HALTED_Pos*/) /*!< SCB DFSR: HALTED Mask */ - -/*@} end of group CMSIS_SCB */ - - -/** - \ingroup CMSIS_core_register - \defgroup CMSIS_SCnSCB System Controls not in SCB (SCnSCB) - \brief Type definitions for the System Control and ID Register not in the SCB - @{ - */ - -/** - \brief Structure type to access the System Control and ID Register not in the SCB. - */ -typedef struct -{ - uint32_t RESERVED0[1U]; - __IM uint32_t ICTR; /*!< Offset: 0x004 (R/ ) Interrupt Controller Type Register */ -#if defined (__CM3_REV) && (__CM3_REV >= 0x200U) - __IOM uint32_t ACTLR; /*!< Offset: 0x008 (R/W) Auxiliary Control Register */ -#else - uint32_t RESERVED1[1U]; -#endif -} SCnSCB_Type; - -/* Interrupt Controller Type Register Definitions */ -#define SCnSCB_ICTR_INTLINESNUM_Pos 0U /*!< ICTR: INTLINESNUM Position */ -#define SCnSCB_ICTR_INTLINESNUM_Msk (0xFUL /*<< SCnSCB_ICTR_INTLINESNUM_Pos*/) /*!< ICTR: INTLINESNUM Mask */ - -/* Auxiliary Control Register Definitions */ - -#define SCnSCB_ACTLR_DISFOLD_Pos 2U /*!< ACTLR: DISFOLD Position */ -#define SCnSCB_ACTLR_DISFOLD_Msk (1UL << SCnSCB_ACTLR_DISFOLD_Pos) /*!< ACTLR: DISFOLD Mask */ - -#define SCnSCB_ACTLR_DISDEFWBUF_Pos 1U /*!< ACTLR: DISDEFWBUF Position */ -#define SCnSCB_ACTLR_DISDEFWBUF_Msk (1UL << SCnSCB_ACTLR_DISDEFWBUF_Pos) /*!< ACTLR: DISDEFWBUF Mask */ - -#define SCnSCB_ACTLR_DISMCYCINT_Pos 0U /*!< ACTLR: DISMCYCINT Position */ -#define SCnSCB_ACTLR_DISMCYCINT_Msk (1UL /*<< SCnSCB_ACTLR_DISMCYCINT_Pos*/) /*!< ACTLR: DISMCYCINT Mask */ - -/*@} end of group CMSIS_SCnotSCB */ - - -/** - \ingroup CMSIS_core_register - \defgroup CMSIS_SysTick System Tick Timer (SysTick) - \brief Type definitions for the System Timer Registers. - @{ - */ - -/** - \brief Structure type to access the System Timer (SysTick). - */ -typedef struct -{ - __IOM uint32_t CTRL; /*!< Offset: 0x000 (R/W) SysTick Control and Status Register */ - __IOM uint32_t LOAD; /*!< Offset: 0x004 (R/W) SysTick Reload Value Register */ - __IOM uint32_t VAL; /*!< Offset: 0x008 (R/W) SysTick Current Value Register */ - __IM uint32_t CALIB; /*!< Offset: 0x00C (R/ ) SysTick Calibration Register */ -} SysTick_Type; - -/* SysTick Control / Status Register Definitions */ -#define SysTick_CTRL_COUNTFLAG_Pos 16U /*!< SysTick CTRL: COUNTFLAG Position */ -#define SysTick_CTRL_COUNTFLAG_Msk (1UL << SysTick_CTRL_COUNTFLAG_Pos) /*!< SysTick CTRL: COUNTFLAG Mask */ - -#define SysTick_CTRL_CLKSOURCE_Pos 2U /*!< SysTick CTRL: CLKSOURCE Position */ -#define SysTick_CTRL_CLKSOURCE_Msk (1UL << SysTick_CTRL_CLKSOURCE_Pos) /*!< SysTick CTRL: CLKSOURCE Mask */ - -#define SysTick_CTRL_TICKINT_Pos 1U /*!< SysTick CTRL: TICKINT Position */ -#define SysTick_CTRL_TICKINT_Msk (1UL << SysTick_CTRL_TICKINT_Pos) /*!< SysTick CTRL: TICKINT Mask */ - -#define SysTick_CTRL_ENABLE_Pos 0U /*!< SysTick CTRL: ENABLE Position */ -#define SysTick_CTRL_ENABLE_Msk (1UL /*<< SysTick_CTRL_ENABLE_Pos*/) /*!< SysTick CTRL: ENABLE Mask */ - -/* SysTick Reload Register Definitions */ -#define SysTick_LOAD_RELOAD_Pos 0U /*!< SysTick LOAD: RELOAD Position */ -#define SysTick_LOAD_RELOAD_Msk (0xFFFFFFUL /*<< SysTick_LOAD_RELOAD_Pos*/) /*!< SysTick LOAD: RELOAD Mask */ - -/* SysTick Current Register Definitions */ -#define SysTick_VAL_CURRENT_Pos 0U /*!< SysTick VAL: CURRENT Position */ -#define SysTick_VAL_CURRENT_Msk (0xFFFFFFUL /*<< SysTick_VAL_CURRENT_Pos*/) /*!< SysTick VAL: CURRENT Mask */ - -/* SysTick Calibration Register Definitions */ -#define SysTick_CALIB_NOREF_Pos 31U /*!< SysTick CALIB: NOREF Position */ -#define SysTick_CALIB_NOREF_Msk (1UL << SysTick_CALIB_NOREF_Pos) /*!< SysTick CALIB: NOREF Mask */ - -#define SysTick_CALIB_SKEW_Pos 30U /*!< SysTick CALIB: SKEW Position */ -#define SysTick_CALIB_SKEW_Msk (1UL << SysTick_CALIB_SKEW_Pos) /*!< SysTick CALIB: SKEW Mask */ - -#define SysTick_CALIB_TENMS_Pos 0U /*!< SysTick CALIB: TENMS Position */ -#define SysTick_CALIB_TENMS_Msk (0xFFFFFFUL /*<< SysTick_CALIB_TENMS_Pos*/) /*!< SysTick CALIB: TENMS Mask */ - -/*@} end of group CMSIS_SysTick */ - - -/** - \ingroup CMSIS_core_register - \defgroup CMSIS_ITM Instrumentation Trace Macrocell (ITM) - \brief Type definitions for the Instrumentation Trace Macrocell (ITM) - @{ - */ - -/** - \brief Structure type to access the Instrumentation Trace Macrocell Register (ITM). - */ -typedef struct -{ - __OM union - { - __OM uint8_t u8; /*!< Offset: 0x000 ( /W) ITM Stimulus Port 8-bit */ - __OM uint16_t u16; /*!< Offset: 0x000 ( /W) ITM Stimulus Port 16-bit */ - __OM uint32_t u32; /*!< Offset: 0x000 ( /W) ITM Stimulus Port 32-bit */ - } PORT [32U]; /*!< Offset: 0x000 ( /W) ITM Stimulus Port Registers */ - uint32_t RESERVED0[864U]; - __IOM uint32_t TER; /*!< Offset: 0xE00 (R/W) ITM Trace Enable Register */ - uint32_t RESERVED1[15U]; - __IOM uint32_t TPR; /*!< Offset: 0xE40 (R/W) ITM Trace Privilege Register */ - uint32_t RESERVED2[15U]; - __IOM uint32_t TCR; /*!< Offset: 0xE80 (R/W) ITM Trace Control Register */ - uint32_t RESERVED3[29U]; - __OM uint32_t IWR; /*!< Offset: 0xEF8 ( /W) ITM Integration Write Register */ - __IM uint32_t IRR; /*!< Offset: 0xEFC (R/ ) ITM Integration Read Register */ - __IOM uint32_t IMCR; /*!< Offset: 0xF00 (R/W) ITM Integration Mode Control Register */ - uint32_t RESERVED4[43U]; - __OM uint32_t LAR; /*!< Offset: 0xFB0 ( /W) ITM Lock Access Register */ - __IM uint32_t LSR; /*!< Offset: 0xFB4 (R/ ) ITM Lock Status Register */ - uint32_t RESERVED5[6U]; - __IM uint32_t PID4; /*!< Offset: 0xFD0 (R/ ) ITM Peripheral Identification Register #4 */ - __IM uint32_t PID5; /*!< Offset: 0xFD4 (R/ ) ITM Peripheral Identification Register #5 */ - __IM uint32_t PID6; /*!< Offset: 0xFD8 (R/ ) ITM Peripheral Identification Register #6 */ - __IM uint32_t PID7; /*!< Offset: 0xFDC (R/ ) ITM Peripheral Identification Register #7 */ - __IM uint32_t PID0; /*!< Offset: 0xFE0 (R/ ) ITM Peripheral Identification Register #0 */ - __IM uint32_t PID1; /*!< Offset: 0xFE4 (R/ ) ITM Peripheral Identification Register #1 */ - __IM uint32_t PID2; /*!< Offset: 0xFE8 (R/ ) ITM Peripheral Identification Register #2 */ - __IM uint32_t PID3; /*!< Offset: 0xFEC (R/ ) ITM Peripheral Identification Register #3 */ - __IM uint32_t CID0; /*!< Offset: 0xFF0 (R/ ) ITM Component Identification Register #0 */ - __IM uint32_t CID1; /*!< Offset: 0xFF4 (R/ ) ITM Component Identification Register #1 */ - __IM uint32_t CID2; /*!< Offset: 0xFF8 (R/ ) ITM Component Identification Register #2 */ - __IM uint32_t CID3; /*!< Offset: 0xFFC (R/ ) ITM Component Identification Register #3 */ -} ITM_Type; - -/* ITM Trace Privilege Register Definitions */ -#define ITM_TPR_PRIVMASK_Pos 0U /*!< ITM TPR: PRIVMASK Position */ -#define ITM_TPR_PRIVMASK_Msk (0xFFFFFFFFUL /*<< ITM_TPR_PRIVMASK_Pos*/) /*!< ITM TPR: PRIVMASK Mask */ - -/* ITM Trace Control Register Definitions */ -#define ITM_TCR_BUSY_Pos 23U /*!< ITM TCR: BUSY Position */ -#define ITM_TCR_BUSY_Msk (1UL << ITM_TCR_BUSY_Pos) /*!< ITM TCR: BUSY Mask */ - -#define ITM_TCR_TraceBusID_Pos 16U /*!< ITM TCR: ATBID Position */ -#define ITM_TCR_TraceBusID_Msk (0x7FUL << ITM_TCR_TraceBusID_Pos) /*!< ITM TCR: ATBID Mask */ - -#define ITM_TCR_GTSFREQ_Pos 10U /*!< ITM TCR: Global timestamp frequency Position */ -#define ITM_TCR_GTSFREQ_Msk (3UL << ITM_TCR_GTSFREQ_Pos) /*!< ITM TCR: Global timestamp frequency Mask */ - -#define ITM_TCR_TSPrescale_Pos 8U /*!< ITM TCR: TSPrescale Position */ -#define ITM_TCR_TSPrescale_Msk (3UL << ITM_TCR_TSPrescale_Pos) /*!< ITM TCR: TSPrescale Mask */ - -#define ITM_TCR_SWOENA_Pos 4U /*!< ITM TCR: SWOENA Position */ -#define ITM_TCR_SWOENA_Msk (1UL << ITM_TCR_SWOENA_Pos) /*!< ITM TCR: SWOENA Mask */ - -#define ITM_TCR_DWTENA_Pos 3U /*!< ITM TCR: DWTENA Position */ -#define ITM_TCR_DWTENA_Msk (1UL << ITM_TCR_DWTENA_Pos) /*!< ITM TCR: DWTENA Mask */ - -#define ITM_TCR_SYNCENA_Pos 2U /*!< ITM TCR: SYNCENA Position */ -#define ITM_TCR_SYNCENA_Msk (1UL << ITM_TCR_SYNCENA_Pos) /*!< ITM TCR: SYNCENA Mask */ - -#define ITM_TCR_TSENA_Pos 1U /*!< ITM TCR: TSENA Position */ -#define ITM_TCR_TSENA_Msk (1UL << ITM_TCR_TSENA_Pos) /*!< ITM TCR: TSENA Mask */ - -#define ITM_TCR_ITMENA_Pos 0U /*!< ITM TCR: ITM Enable bit Position */ -#define ITM_TCR_ITMENA_Msk (1UL /*<< ITM_TCR_ITMENA_Pos*/) /*!< ITM TCR: ITM Enable bit Mask */ - -/* ITM Integration Write Register Definitions */ -#define ITM_IWR_ATVALIDM_Pos 0U /*!< ITM IWR: ATVALIDM Position */ -#define ITM_IWR_ATVALIDM_Msk (1UL /*<< ITM_IWR_ATVALIDM_Pos*/) /*!< ITM IWR: ATVALIDM Mask */ - -/* ITM Integration Read Register Definitions */ -#define ITM_IRR_ATREADYM_Pos 0U /*!< ITM IRR: ATREADYM Position */ -#define ITM_IRR_ATREADYM_Msk (1UL /*<< ITM_IRR_ATREADYM_Pos*/) /*!< ITM IRR: ATREADYM Mask */ - -/* ITM Integration Mode Control Register Definitions */ -#define ITM_IMCR_INTEGRATION_Pos 0U /*!< ITM IMCR: INTEGRATION Position */ -#define ITM_IMCR_INTEGRATION_Msk (1UL /*<< ITM_IMCR_INTEGRATION_Pos*/) /*!< ITM IMCR: INTEGRATION Mask */ - -/* ITM Lock Status Register Definitions */ -#define ITM_LSR_ByteAcc_Pos 2U /*!< ITM LSR: ByteAcc Position */ -#define ITM_LSR_ByteAcc_Msk (1UL << ITM_LSR_ByteAcc_Pos) /*!< ITM LSR: ByteAcc Mask */ - -#define ITM_LSR_Access_Pos 1U /*!< ITM LSR: Access Position */ -#define ITM_LSR_Access_Msk (1UL << ITM_LSR_Access_Pos) /*!< ITM LSR: Access Mask */ - -#define ITM_LSR_Present_Pos 0U /*!< ITM LSR: Present Position */ -#define ITM_LSR_Present_Msk (1UL /*<< ITM_LSR_Present_Pos*/) /*!< ITM LSR: Present Mask */ - -/*@}*/ /* end of group CMSIS_ITM */ - - -/** - \ingroup CMSIS_core_register - \defgroup CMSIS_DWT Data Watchpoint and Trace (DWT) - \brief Type definitions for the Data Watchpoint and Trace (DWT) - @{ - */ - -/** - \brief Structure type to access the Data Watchpoint and Trace Register (DWT). - */ -typedef struct -{ - __IOM uint32_t CTRL; /*!< Offset: 0x000 (R/W) Control Register */ - __IOM uint32_t CYCCNT; /*!< Offset: 0x004 (R/W) Cycle Count Register */ - __IOM uint32_t CPICNT; /*!< Offset: 0x008 (R/W) CPI Count Register */ - __IOM uint32_t EXCCNT; /*!< Offset: 0x00C (R/W) Exception Overhead Count Register */ - __IOM uint32_t SLEEPCNT; /*!< Offset: 0x010 (R/W) Sleep Count Register */ - __IOM uint32_t LSUCNT; /*!< Offset: 0x014 (R/W) LSU Count Register */ - __IOM uint32_t FOLDCNT; /*!< Offset: 0x018 (R/W) Folded-instruction Count Register */ - __IM uint32_t PCSR; /*!< Offset: 0x01C (R/ ) Program Counter Sample Register */ - __IOM uint32_t COMP0; /*!< Offset: 0x020 (R/W) Comparator Register 0 */ - __IOM uint32_t MASK0; /*!< Offset: 0x024 (R/W) Mask Register 0 */ - __IOM uint32_t FUNCTION0; /*!< Offset: 0x028 (R/W) Function Register 0 */ - uint32_t RESERVED0[1U]; - __IOM uint32_t COMP1; /*!< Offset: 0x030 (R/W) Comparator Register 1 */ - __IOM uint32_t MASK1; /*!< Offset: 0x034 (R/W) Mask Register 1 */ - __IOM uint32_t FUNCTION1; /*!< Offset: 0x038 (R/W) Function Register 1 */ - uint32_t RESERVED1[1U]; - __IOM uint32_t COMP2; /*!< Offset: 0x040 (R/W) Comparator Register 2 */ - __IOM uint32_t MASK2; /*!< Offset: 0x044 (R/W) Mask Register 2 */ - __IOM uint32_t FUNCTION2; /*!< Offset: 0x048 (R/W) Function Register 2 */ - uint32_t RESERVED2[1U]; - __IOM uint32_t COMP3; /*!< Offset: 0x050 (R/W) Comparator Register 3 */ - __IOM uint32_t MASK3; /*!< Offset: 0x054 (R/W) Mask Register 3 */ - __IOM uint32_t FUNCTION3; /*!< Offset: 0x058 (R/W) Function Register 3 */ -} DWT_Type; - -/* DWT Control Register Definitions */ -#define DWT_CTRL_NUMCOMP_Pos 28U /*!< DWT CTRL: NUMCOMP Position */ -#define DWT_CTRL_NUMCOMP_Msk (0xFUL << DWT_CTRL_NUMCOMP_Pos) /*!< DWT CTRL: NUMCOMP Mask */ - -#define DWT_CTRL_NOTRCPKT_Pos 27U /*!< DWT CTRL: NOTRCPKT Position */ -#define DWT_CTRL_NOTRCPKT_Msk (0x1UL << DWT_CTRL_NOTRCPKT_Pos) /*!< DWT CTRL: NOTRCPKT Mask */ - -#define DWT_CTRL_NOEXTTRIG_Pos 26U /*!< DWT CTRL: NOEXTTRIG Position */ -#define DWT_CTRL_NOEXTTRIG_Msk (0x1UL << DWT_CTRL_NOEXTTRIG_Pos) /*!< DWT CTRL: NOEXTTRIG Mask */ - -#define DWT_CTRL_NOCYCCNT_Pos 25U /*!< DWT CTRL: NOCYCCNT Position */ -#define DWT_CTRL_NOCYCCNT_Msk (0x1UL << DWT_CTRL_NOCYCCNT_Pos) /*!< DWT CTRL: NOCYCCNT Mask */ - -#define DWT_CTRL_NOPRFCNT_Pos 24U /*!< DWT CTRL: NOPRFCNT Position */ -#define DWT_CTRL_NOPRFCNT_Msk (0x1UL << DWT_CTRL_NOPRFCNT_Pos) /*!< DWT CTRL: NOPRFCNT Mask */ - -#define DWT_CTRL_CYCEVTENA_Pos 22U /*!< DWT CTRL: CYCEVTENA Position */ -#define DWT_CTRL_CYCEVTENA_Msk (0x1UL << DWT_CTRL_CYCEVTENA_Pos) /*!< DWT CTRL: CYCEVTENA Mask */ - -#define DWT_CTRL_FOLDEVTENA_Pos 21U /*!< DWT CTRL: FOLDEVTENA Position */ -#define DWT_CTRL_FOLDEVTENA_Msk (0x1UL << DWT_CTRL_FOLDEVTENA_Pos) /*!< DWT CTRL: FOLDEVTENA Mask */ - -#define DWT_CTRL_LSUEVTENA_Pos 20U /*!< DWT CTRL: LSUEVTENA Position */ -#define DWT_CTRL_LSUEVTENA_Msk (0x1UL << DWT_CTRL_LSUEVTENA_Pos) /*!< DWT CTRL: LSUEVTENA Mask */ - -#define DWT_CTRL_SLEEPEVTENA_Pos 19U /*!< DWT CTRL: SLEEPEVTENA Position */ -#define DWT_CTRL_SLEEPEVTENA_Msk (0x1UL << DWT_CTRL_SLEEPEVTENA_Pos) /*!< DWT CTRL: SLEEPEVTENA Mask */ - -#define DWT_CTRL_EXCEVTENA_Pos 18U /*!< DWT CTRL: EXCEVTENA Position */ -#define DWT_CTRL_EXCEVTENA_Msk (0x1UL << DWT_CTRL_EXCEVTENA_Pos) /*!< DWT CTRL: EXCEVTENA Mask */ - -#define DWT_CTRL_CPIEVTENA_Pos 17U /*!< DWT CTRL: CPIEVTENA Position */ -#define DWT_CTRL_CPIEVTENA_Msk (0x1UL << DWT_CTRL_CPIEVTENA_Pos) /*!< DWT CTRL: CPIEVTENA Mask */ - -#define DWT_CTRL_EXCTRCENA_Pos 16U /*!< DWT CTRL: EXCTRCENA Position */ -#define DWT_CTRL_EXCTRCENA_Msk (0x1UL << DWT_CTRL_EXCTRCENA_Pos) /*!< DWT CTRL: EXCTRCENA Mask */ - -#define DWT_CTRL_PCSAMPLENA_Pos 12U /*!< DWT CTRL: PCSAMPLENA Position */ -#define DWT_CTRL_PCSAMPLENA_Msk (0x1UL << DWT_CTRL_PCSAMPLENA_Pos) /*!< DWT CTRL: PCSAMPLENA Mask */ - -#define DWT_CTRL_SYNCTAP_Pos 10U /*!< DWT CTRL: SYNCTAP Position */ -#define DWT_CTRL_SYNCTAP_Msk (0x3UL << DWT_CTRL_SYNCTAP_Pos) /*!< DWT CTRL: SYNCTAP Mask */ - -#define DWT_CTRL_CYCTAP_Pos 9U /*!< DWT CTRL: CYCTAP Position */ -#define DWT_CTRL_CYCTAP_Msk (0x1UL << DWT_CTRL_CYCTAP_Pos) /*!< DWT CTRL: CYCTAP Mask */ - -#define DWT_CTRL_POSTINIT_Pos 5U /*!< DWT CTRL: POSTINIT Position */ -#define DWT_CTRL_POSTINIT_Msk (0xFUL << DWT_CTRL_POSTINIT_Pos) /*!< DWT CTRL: POSTINIT Mask */ - -#define DWT_CTRL_POSTPRESET_Pos 1U /*!< DWT CTRL: POSTPRESET Position */ -#define DWT_CTRL_POSTPRESET_Msk (0xFUL << DWT_CTRL_POSTPRESET_Pos) /*!< DWT CTRL: POSTPRESET Mask */ - -#define DWT_CTRL_CYCCNTENA_Pos 0U /*!< DWT CTRL: CYCCNTENA Position */ -#define DWT_CTRL_CYCCNTENA_Msk (0x1UL /*<< DWT_CTRL_CYCCNTENA_Pos*/) /*!< DWT CTRL: CYCCNTENA Mask */ - -/* DWT CPI Count Register Definitions */ -#define DWT_CPICNT_CPICNT_Pos 0U /*!< DWT CPICNT: CPICNT Position */ -#define DWT_CPICNT_CPICNT_Msk (0xFFUL /*<< DWT_CPICNT_CPICNT_Pos*/) /*!< DWT CPICNT: CPICNT Mask */ - -/* DWT Exception Overhead Count Register Definitions */ -#define DWT_EXCCNT_EXCCNT_Pos 0U /*!< DWT EXCCNT: EXCCNT Position */ -#define DWT_EXCCNT_EXCCNT_Msk (0xFFUL /*<< DWT_EXCCNT_EXCCNT_Pos*/) /*!< DWT EXCCNT: EXCCNT Mask */ - -/* DWT Sleep Count Register Definitions */ -#define DWT_SLEEPCNT_SLEEPCNT_Pos 0U /*!< DWT SLEEPCNT: SLEEPCNT Position */ -#define DWT_SLEEPCNT_SLEEPCNT_Msk (0xFFUL /*<< DWT_SLEEPCNT_SLEEPCNT_Pos*/) /*!< DWT SLEEPCNT: SLEEPCNT Mask */ - -/* DWT LSU Count Register Definitions */ -#define DWT_LSUCNT_LSUCNT_Pos 0U /*!< DWT LSUCNT: LSUCNT Position */ -#define DWT_LSUCNT_LSUCNT_Msk (0xFFUL /*<< DWT_LSUCNT_LSUCNT_Pos*/) /*!< DWT LSUCNT: LSUCNT Mask */ - -/* DWT Folded-instruction Count Register Definitions */ -#define DWT_FOLDCNT_FOLDCNT_Pos 0U /*!< DWT FOLDCNT: FOLDCNT Position */ -#define DWT_FOLDCNT_FOLDCNT_Msk (0xFFUL /*<< DWT_FOLDCNT_FOLDCNT_Pos*/) /*!< DWT FOLDCNT: FOLDCNT Mask */ - -/* DWT Comparator Mask Register Definitions */ -#define DWT_MASK_MASK_Pos 0U /*!< DWT MASK: MASK Position */ -#define DWT_MASK_MASK_Msk (0x1FUL /*<< DWT_MASK_MASK_Pos*/) /*!< DWT MASK: MASK Mask */ - -/* DWT Comparator Function Register Definitions */ -#define DWT_FUNCTION_MATCHED_Pos 24U /*!< DWT FUNCTION: MATCHED Position */ -#define DWT_FUNCTION_MATCHED_Msk (0x1UL << DWT_FUNCTION_MATCHED_Pos) /*!< DWT FUNCTION: MATCHED Mask */ - -#define DWT_FUNCTION_DATAVADDR1_Pos 16U /*!< DWT FUNCTION: DATAVADDR1 Position */ -#define DWT_FUNCTION_DATAVADDR1_Msk (0xFUL << DWT_FUNCTION_DATAVADDR1_Pos) /*!< DWT FUNCTION: DATAVADDR1 Mask */ - -#define DWT_FUNCTION_DATAVADDR0_Pos 12U /*!< DWT FUNCTION: DATAVADDR0 Position */ -#define DWT_FUNCTION_DATAVADDR0_Msk (0xFUL << DWT_FUNCTION_DATAVADDR0_Pos) /*!< DWT FUNCTION: DATAVADDR0 Mask */ - -#define DWT_FUNCTION_DATAVSIZE_Pos 10U /*!< DWT FUNCTION: DATAVSIZE Position */ -#define DWT_FUNCTION_DATAVSIZE_Msk (0x3UL << DWT_FUNCTION_DATAVSIZE_Pos) /*!< DWT FUNCTION: DATAVSIZE Mask */ - -#define DWT_FUNCTION_LNK1ENA_Pos 9U /*!< DWT FUNCTION: LNK1ENA Position */ -#define DWT_FUNCTION_LNK1ENA_Msk (0x1UL << DWT_FUNCTION_LNK1ENA_Pos) /*!< DWT FUNCTION: LNK1ENA Mask */ - -#define DWT_FUNCTION_DATAVMATCH_Pos 8U /*!< DWT FUNCTION: DATAVMATCH Position */ -#define DWT_FUNCTION_DATAVMATCH_Msk (0x1UL << DWT_FUNCTION_DATAVMATCH_Pos) /*!< DWT FUNCTION: DATAVMATCH Mask */ - -#define DWT_FUNCTION_CYCMATCH_Pos 7U /*!< DWT FUNCTION: CYCMATCH Position */ -#define DWT_FUNCTION_CYCMATCH_Msk (0x1UL << DWT_FUNCTION_CYCMATCH_Pos) /*!< DWT FUNCTION: CYCMATCH Mask */ - -#define DWT_FUNCTION_EMITRANGE_Pos 5U /*!< DWT FUNCTION: EMITRANGE Position */ -#define DWT_FUNCTION_EMITRANGE_Msk (0x1UL << DWT_FUNCTION_EMITRANGE_Pos) /*!< DWT FUNCTION: EMITRANGE Mask */ - -#define DWT_FUNCTION_FUNCTION_Pos 0U /*!< DWT FUNCTION: FUNCTION Position */ -#define DWT_FUNCTION_FUNCTION_Msk (0xFUL /*<< DWT_FUNCTION_FUNCTION_Pos*/) /*!< DWT FUNCTION: FUNCTION Mask */ - -/*@}*/ /* end of group CMSIS_DWT */ - - -/** - \ingroup CMSIS_core_register - \defgroup CMSIS_TPI Trace Port Interface (TPI) - \brief Type definitions for the Trace Port Interface (TPI) - @{ - */ - -/** - \brief Structure type to access the Trace Port Interface Register (TPI). - */ -typedef struct -{ - __IM uint32_t SSPSR; /*!< Offset: 0x000 (R/ ) Supported Parallel Port Size Register */ - __IOM uint32_t CSPSR; /*!< Offset: 0x004 (R/W) Current Parallel Port Size Register */ - uint32_t RESERVED0[2U]; - __IOM uint32_t ACPR; /*!< Offset: 0x010 (R/W) Asynchronous Clock Prescaler Register */ - uint32_t RESERVED1[55U]; - __IOM uint32_t SPPR; /*!< Offset: 0x0F0 (R/W) Selected Pin Protocol Register */ - uint32_t RESERVED2[131U]; - __IM uint32_t FFSR; /*!< Offset: 0x300 (R/ ) Formatter and Flush Status Register */ - __IOM uint32_t FFCR; /*!< Offset: 0x304 (R/W) Formatter and Flush Control Register */ - __IM uint32_t FSCR; /*!< Offset: 0x308 (R/ ) Formatter Synchronization Counter Register */ - uint32_t RESERVED3[759U]; - __IM uint32_t TRIGGER; /*!< Offset: 0xEE8 (R/ ) TRIGGER Register */ - __IM uint32_t FIFO0; /*!< Offset: 0xEEC (R/ ) Integration ETM Data */ - __IM uint32_t ITATBCTR2; /*!< Offset: 0xEF0 (R/ ) ITATBCTR2 */ - uint32_t RESERVED4[1U]; - __IM uint32_t ITATBCTR0; /*!< Offset: 0xEF8 (R/ ) ITATBCTR0 */ - __IM uint32_t FIFO1; /*!< Offset: 0xEFC (R/ ) Integration ITM Data */ - __IOM uint32_t ITCTRL; /*!< Offset: 0xF00 (R/W) Integration Mode Control */ - uint32_t RESERVED5[39U]; - __IOM uint32_t CLAIMSET; /*!< Offset: 0xFA0 (R/W) Claim tag set */ - __IOM uint32_t CLAIMCLR; /*!< Offset: 0xFA4 (R/W) Claim tag clear */ - uint32_t RESERVED7[8U]; - __IM uint32_t DEVID; /*!< Offset: 0xFC8 (R/ ) TPIU_DEVID */ - __IM uint32_t DEVTYPE; /*!< Offset: 0xFCC (R/ ) TPIU_DEVTYPE */ -} TPI_Type; - -/* TPI Asynchronous Clock Prescaler Register Definitions */ -#define TPI_ACPR_PRESCALER_Pos 0U /*!< TPI ACPR: PRESCALER Position */ -#define TPI_ACPR_PRESCALER_Msk (0x1FFFUL /*<< TPI_ACPR_PRESCALER_Pos*/) /*!< TPI ACPR: PRESCALER Mask */ - -/* TPI Selected Pin Protocol Register Definitions */ -#define TPI_SPPR_TXMODE_Pos 0U /*!< TPI SPPR: TXMODE Position */ -#define TPI_SPPR_TXMODE_Msk (0x3UL /*<< TPI_SPPR_TXMODE_Pos*/) /*!< TPI SPPR: TXMODE Mask */ - -/* TPI Formatter and Flush Status Register Definitions */ -#define TPI_FFSR_FtNonStop_Pos 3U /*!< TPI FFSR: FtNonStop Position */ -#define TPI_FFSR_FtNonStop_Msk (0x1UL << TPI_FFSR_FtNonStop_Pos) /*!< TPI FFSR: FtNonStop Mask */ - -#define TPI_FFSR_TCPresent_Pos 2U /*!< TPI FFSR: TCPresent Position */ -#define TPI_FFSR_TCPresent_Msk (0x1UL << TPI_FFSR_TCPresent_Pos) /*!< TPI FFSR: TCPresent Mask */ - -#define TPI_FFSR_FtStopped_Pos 1U /*!< TPI FFSR: FtStopped Position */ -#define TPI_FFSR_FtStopped_Msk (0x1UL << TPI_FFSR_FtStopped_Pos) /*!< TPI FFSR: FtStopped Mask */ - -#define TPI_FFSR_FlInProg_Pos 0U /*!< TPI FFSR: FlInProg Position */ -#define TPI_FFSR_FlInProg_Msk (0x1UL /*<< TPI_FFSR_FlInProg_Pos*/) /*!< TPI FFSR: FlInProg Mask */ - -/* TPI Formatter and Flush Control Register Definitions */ -#define TPI_FFCR_TrigIn_Pos 8U /*!< TPI FFCR: TrigIn Position */ -#define TPI_FFCR_TrigIn_Msk (0x1UL << TPI_FFCR_TrigIn_Pos) /*!< TPI FFCR: TrigIn Mask */ - -#define TPI_FFCR_EnFCont_Pos 1U /*!< TPI FFCR: EnFCont Position */ -#define TPI_FFCR_EnFCont_Msk (0x1UL << TPI_FFCR_EnFCont_Pos) /*!< TPI FFCR: EnFCont Mask */ - -/* TPI TRIGGER Register Definitions */ -#define TPI_TRIGGER_TRIGGER_Pos 0U /*!< TPI TRIGGER: TRIGGER Position */ -#define TPI_TRIGGER_TRIGGER_Msk (0x1UL /*<< TPI_TRIGGER_TRIGGER_Pos*/) /*!< TPI TRIGGER: TRIGGER Mask */ - -/* TPI Integration ETM Data Register Definitions (FIFO0) */ -#define TPI_FIFO0_ITM_ATVALID_Pos 29U /*!< TPI FIFO0: ITM_ATVALID Position */ -#define TPI_FIFO0_ITM_ATVALID_Msk (0x3UL << TPI_FIFO0_ITM_ATVALID_Pos) /*!< TPI FIFO0: ITM_ATVALID Mask */ - -#define TPI_FIFO0_ITM_bytecount_Pos 27U /*!< TPI FIFO0: ITM_bytecount Position */ -#define TPI_FIFO0_ITM_bytecount_Msk (0x3UL << TPI_FIFO0_ITM_bytecount_Pos) /*!< TPI FIFO0: ITM_bytecount Mask */ - -#define TPI_FIFO0_ETM_ATVALID_Pos 26U /*!< TPI FIFO0: ETM_ATVALID Position */ -#define TPI_FIFO0_ETM_ATVALID_Msk (0x3UL << TPI_FIFO0_ETM_ATVALID_Pos) /*!< TPI FIFO0: ETM_ATVALID Mask */ - -#define TPI_FIFO0_ETM_bytecount_Pos 24U /*!< TPI FIFO0: ETM_bytecount Position */ -#define TPI_FIFO0_ETM_bytecount_Msk (0x3UL << TPI_FIFO0_ETM_bytecount_Pos) /*!< TPI FIFO0: ETM_bytecount Mask */ - -#define TPI_FIFO0_ETM2_Pos 16U /*!< TPI FIFO0: ETM2 Position */ -#define TPI_FIFO0_ETM2_Msk (0xFFUL << TPI_FIFO0_ETM2_Pos) /*!< TPI FIFO0: ETM2 Mask */ - -#define TPI_FIFO0_ETM1_Pos 8U /*!< TPI FIFO0: ETM1 Position */ -#define TPI_FIFO0_ETM1_Msk (0xFFUL << TPI_FIFO0_ETM1_Pos) /*!< TPI FIFO0: ETM1 Mask */ - -#define TPI_FIFO0_ETM0_Pos 0U /*!< TPI FIFO0: ETM0 Position */ -#define TPI_FIFO0_ETM0_Msk (0xFFUL /*<< TPI_FIFO0_ETM0_Pos*/) /*!< TPI FIFO0: ETM0 Mask */ - -/* TPI ITATBCTR2 Register Definitions */ -#define TPI_ITATBCTR2_ATREADY2_Pos 0U /*!< TPI ITATBCTR2: ATREADY2 Position */ -#define TPI_ITATBCTR2_ATREADY2_Msk (0x1UL /*<< TPI_ITATBCTR2_ATREADY2_Pos*/) /*!< TPI ITATBCTR2: ATREADY2 Mask */ - -#define TPI_ITATBCTR2_ATREADY1_Pos 0U /*!< TPI ITATBCTR2: ATREADY1 Position */ -#define TPI_ITATBCTR2_ATREADY1_Msk (0x1UL /*<< TPI_ITATBCTR2_ATREADY1_Pos*/) /*!< TPI ITATBCTR2: ATREADY1 Mask */ - -/* TPI Integration ITM Data Register Definitions (FIFO1) */ -#define TPI_FIFO1_ITM_ATVALID_Pos 29U /*!< TPI FIFO1: ITM_ATVALID Position */ -#define TPI_FIFO1_ITM_ATVALID_Msk (0x3UL << TPI_FIFO1_ITM_ATVALID_Pos) /*!< TPI FIFO1: ITM_ATVALID Mask */ - -#define TPI_FIFO1_ITM_bytecount_Pos 27U /*!< TPI FIFO1: ITM_bytecount Position */ -#define TPI_FIFO1_ITM_bytecount_Msk (0x3UL << TPI_FIFO1_ITM_bytecount_Pos) /*!< TPI FIFO1: ITM_bytecount Mask */ - -#define TPI_FIFO1_ETM_ATVALID_Pos 26U /*!< TPI FIFO1: ETM_ATVALID Position */ -#define TPI_FIFO1_ETM_ATVALID_Msk (0x3UL << TPI_FIFO1_ETM_ATVALID_Pos) /*!< TPI FIFO1: ETM_ATVALID Mask */ - -#define TPI_FIFO1_ETM_bytecount_Pos 24U /*!< TPI FIFO1: ETM_bytecount Position */ -#define TPI_FIFO1_ETM_bytecount_Msk (0x3UL << TPI_FIFO1_ETM_bytecount_Pos) /*!< TPI FIFO1: ETM_bytecount Mask */ - -#define TPI_FIFO1_ITM2_Pos 16U /*!< TPI FIFO1: ITM2 Position */ -#define TPI_FIFO1_ITM2_Msk (0xFFUL << TPI_FIFO1_ITM2_Pos) /*!< TPI FIFO1: ITM2 Mask */ - -#define TPI_FIFO1_ITM1_Pos 8U /*!< TPI FIFO1: ITM1 Position */ -#define TPI_FIFO1_ITM1_Msk (0xFFUL << TPI_FIFO1_ITM1_Pos) /*!< TPI FIFO1: ITM1 Mask */ - -#define TPI_FIFO1_ITM0_Pos 0U /*!< TPI FIFO1: ITM0 Position */ -#define TPI_FIFO1_ITM0_Msk (0xFFUL /*<< TPI_FIFO1_ITM0_Pos*/) /*!< TPI FIFO1: ITM0 Mask */ - -/* TPI ITATBCTR0 Register Definitions */ -#define TPI_ITATBCTR0_ATREADY2_Pos 0U /*!< TPI ITATBCTR0: ATREADY2 Position */ -#define TPI_ITATBCTR0_ATREADY2_Msk (0x1UL /*<< TPI_ITATBCTR0_ATREADY2_Pos*/) /*!< TPI ITATBCTR0: ATREADY2 Mask */ - -#define TPI_ITATBCTR0_ATREADY1_Pos 0U /*!< TPI ITATBCTR0: ATREADY1 Position */ -#define TPI_ITATBCTR0_ATREADY1_Msk (0x1UL /*<< TPI_ITATBCTR0_ATREADY1_Pos*/) /*!< TPI ITATBCTR0: ATREADY1 Mask */ - -/* TPI Integration Mode Control Register Definitions */ -#define TPI_ITCTRL_Mode_Pos 0U /*!< TPI ITCTRL: Mode Position */ -#define TPI_ITCTRL_Mode_Msk (0x3UL /*<< TPI_ITCTRL_Mode_Pos*/) /*!< TPI ITCTRL: Mode Mask */ - -/* TPI DEVID Register Definitions */ -#define TPI_DEVID_NRZVALID_Pos 11U /*!< TPI DEVID: NRZVALID Position */ -#define TPI_DEVID_NRZVALID_Msk (0x1UL << TPI_DEVID_NRZVALID_Pos) /*!< TPI DEVID: NRZVALID Mask */ - -#define TPI_DEVID_MANCVALID_Pos 10U /*!< TPI DEVID: MANCVALID Position */ -#define TPI_DEVID_MANCVALID_Msk (0x1UL << TPI_DEVID_MANCVALID_Pos) /*!< TPI DEVID: MANCVALID Mask */ - -#define TPI_DEVID_PTINVALID_Pos 9U /*!< TPI DEVID: PTINVALID Position */ -#define TPI_DEVID_PTINVALID_Msk (0x1UL << TPI_DEVID_PTINVALID_Pos) /*!< TPI DEVID: PTINVALID Mask */ - -#define TPI_DEVID_MinBufSz_Pos 6U /*!< TPI DEVID: MinBufSz Position */ -#define TPI_DEVID_MinBufSz_Msk (0x7UL << TPI_DEVID_MinBufSz_Pos) /*!< TPI DEVID: MinBufSz Mask */ - -#define TPI_DEVID_AsynClkIn_Pos 5U /*!< TPI DEVID: AsynClkIn Position */ -#define TPI_DEVID_AsynClkIn_Msk (0x1UL << TPI_DEVID_AsynClkIn_Pos) /*!< TPI DEVID: AsynClkIn Mask */ - -#define TPI_DEVID_NrTraceInput_Pos 0U /*!< TPI DEVID: NrTraceInput Position */ -#define TPI_DEVID_NrTraceInput_Msk (0x1FUL /*<< TPI_DEVID_NrTraceInput_Pos*/) /*!< TPI DEVID: NrTraceInput Mask */ - -/* TPI DEVTYPE Register Definitions */ -#define TPI_DEVTYPE_SubType_Pos 4U /*!< TPI DEVTYPE: SubType Position */ -#define TPI_DEVTYPE_SubType_Msk (0xFUL /*<< TPI_DEVTYPE_SubType_Pos*/) /*!< TPI DEVTYPE: SubType Mask */ - -#define TPI_DEVTYPE_MajorType_Pos 0U /*!< TPI DEVTYPE: MajorType Position */ -#define TPI_DEVTYPE_MajorType_Msk (0xFUL << TPI_DEVTYPE_MajorType_Pos) /*!< TPI DEVTYPE: MajorType Mask */ - -/*@}*/ /* end of group CMSIS_TPI */ - - -#if defined (__MPU_PRESENT) && (__MPU_PRESENT == 1U) -/** - \ingroup CMSIS_core_register - \defgroup CMSIS_MPU Memory Protection Unit (MPU) - \brief Type definitions for the Memory Protection Unit (MPU) - @{ - */ - -/** - \brief Structure type to access the Memory Protection Unit (MPU). - */ -typedef struct -{ - __IM uint32_t TYPE; /*!< Offset: 0x000 (R/ ) MPU Type Register */ - __IOM uint32_t CTRL; /*!< Offset: 0x004 (R/W) MPU Control Register */ - __IOM uint32_t RNR; /*!< Offset: 0x008 (R/W) MPU Region RNRber Register */ - __IOM uint32_t RBAR; /*!< Offset: 0x00C (R/W) MPU Region Base Address Register */ - __IOM uint32_t RASR; /*!< Offset: 0x010 (R/W) MPU Region Attribute and Size Register */ - __IOM uint32_t RBAR_A1; /*!< Offset: 0x014 (R/W) MPU Alias 1 Region Base Address Register */ - __IOM uint32_t RASR_A1; /*!< Offset: 0x018 (R/W) MPU Alias 1 Region Attribute and Size Register */ - __IOM uint32_t RBAR_A2; /*!< Offset: 0x01C (R/W) MPU Alias 2 Region Base Address Register */ - __IOM uint32_t RASR_A2; /*!< Offset: 0x020 (R/W) MPU Alias 2 Region Attribute and Size Register */ - __IOM uint32_t RBAR_A3; /*!< Offset: 0x024 (R/W) MPU Alias 3 Region Base Address Register */ - __IOM uint32_t RASR_A3; /*!< Offset: 0x028 (R/W) MPU Alias 3 Region Attribute and Size Register */ -} MPU_Type; - -#define MPU_TYPE_RALIASES 4U - -/* MPU Type Register Definitions */ -#define MPU_TYPE_IREGION_Pos 16U /*!< MPU TYPE: IREGION Position */ -#define MPU_TYPE_IREGION_Msk (0xFFUL << MPU_TYPE_IREGION_Pos) /*!< MPU TYPE: IREGION Mask */ - -#define MPU_TYPE_DREGION_Pos 8U /*!< MPU TYPE: DREGION Position */ -#define MPU_TYPE_DREGION_Msk (0xFFUL << MPU_TYPE_DREGION_Pos) /*!< MPU TYPE: DREGION Mask */ - -#define MPU_TYPE_SEPARATE_Pos 0U /*!< MPU TYPE: SEPARATE Position */ -#define MPU_TYPE_SEPARATE_Msk (1UL /*<< MPU_TYPE_SEPARATE_Pos*/) /*!< MPU TYPE: SEPARATE Mask */ - -/* MPU Control Register Definitions */ -#define MPU_CTRL_PRIVDEFENA_Pos 2U /*!< MPU CTRL: PRIVDEFENA Position */ -#define MPU_CTRL_PRIVDEFENA_Msk (1UL << MPU_CTRL_PRIVDEFENA_Pos) /*!< MPU CTRL: PRIVDEFENA Mask */ - -#define MPU_CTRL_HFNMIENA_Pos 1U /*!< MPU CTRL: HFNMIENA Position */ -#define MPU_CTRL_HFNMIENA_Msk (1UL << MPU_CTRL_HFNMIENA_Pos) /*!< MPU CTRL: HFNMIENA Mask */ - -#define MPU_CTRL_ENABLE_Pos 0U /*!< MPU CTRL: ENABLE Position */ -#define MPU_CTRL_ENABLE_Msk (1UL /*<< MPU_CTRL_ENABLE_Pos*/) /*!< MPU CTRL: ENABLE Mask */ - -/* MPU Region Number Register Definitions */ -#define MPU_RNR_REGION_Pos 0U /*!< MPU RNR: REGION Position */ -#define MPU_RNR_REGION_Msk (0xFFUL /*<< MPU_RNR_REGION_Pos*/) /*!< MPU RNR: REGION Mask */ - -/* MPU Region Base Address Register Definitions */ -#define MPU_RBAR_ADDR_Pos 5U /*!< MPU RBAR: ADDR Position */ -#define MPU_RBAR_ADDR_Msk (0x7FFFFFFUL << MPU_RBAR_ADDR_Pos) /*!< MPU RBAR: ADDR Mask */ - -#define MPU_RBAR_VALID_Pos 4U /*!< MPU RBAR: VALID Position */ -#define MPU_RBAR_VALID_Msk (1UL << MPU_RBAR_VALID_Pos) /*!< MPU RBAR: VALID Mask */ - -#define MPU_RBAR_REGION_Pos 0U /*!< MPU RBAR: REGION Position */ -#define MPU_RBAR_REGION_Msk (0xFUL /*<< MPU_RBAR_REGION_Pos*/) /*!< MPU RBAR: REGION Mask */ - -/* MPU Region Attribute and Size Register Definitions */ -#define MPU_RASR_ATTRS_Pos 16U /*!< MPU RASR: MPU Region Attribute field Position */ -#define MPU_RASR_ATTRS_Msk (0xFFFFUL << MPU_RASR_ATTRS_Pos) /*!< MPU RASR: MPU Region Attribute field Mask */ - -#define MPU_RASR_XN_Pos 28U /*!< MPU RASR: ATTRS.XN Position */ -#define MPU_RASR_XN_Msk (1UL << MPU_RASR_XN_Pos) /*!< MPU RASR: ATTRS.XN Mask */ - -#define MPU_RASR_AP_Pos 24U /*!< MPU RASR: ATTRS.AP Position */ -#define MPU_RASR_AP_Msk (0x7UL << MPU_RASR_AP_Pos) /*!< MPU RASR: ATTRS.AP Mask */ - -#define MPU_RASR_TEX_Pos 19U /*!< MPU RASR: ATTRS.TEX Position */ -#define MPU_RASR_TEX_Msk (0x7UL << MPU_RASR_TEX_Pos) /*!< MPU RASR: ATTRS.TEX Mask */ - -#define MPU_RASR_S_Pos 18U /*!< MPU RASR: ATTRS.S Position */ -#define MPU_RASR_S_Msk (1UL << MPU_RASR_S_Pos) /*!< MPU RASR: ATTRS.S Mask */ - -#define MPU_RASR_C_Pos 17U /*!< MPU RASR: ATTRS.C Position */ -#define MPU_RASR_C_Msk (1UL << MPU_RASR_C_Pos) /*!< MPU RASR: ATTRS.C Mask */ - -#define MPU_RASR_B_Pos 16U /*!< MPU RASR: ATTRS.B Position */ -#define MPU_RASR_B_Msk (1UL << MPU_RASR_B_Pos) /*!< MPU RASR: ATTRS.B Mask */ - -#define MPU_RASR_SRD_Pos 8U /*!< MPU RASR: Sub-Region Disable Position */ -#define MPU_RASR_SRD_Msk (0xFFUL << MPU_RASR_SRD_Pos) /*!< MPU RASR: Sub-Region Disable Mask */ - -#define MPU_RASR_SIZE_Pos 1U /*!< MPU RASR: Region Size Field Position */ -#define MPU_RASR_SIZE_Msk (0x1FUL << MPU_RASR_SIZE_Pos) /*!< MPU RASR: Region Size Field Mask */ - -#define MPU_RASR_ENABLE_Pos 0U /*!< MPU RASR: Region enable bit Position */ -#define MPU_RASR_ENABLE_Msk (1UL /*<< MPU_RASR_ENABLE_Pos*/) /*!< MPU RASR: Region enable bit Disable Mask */ - -/*@} end of group CMSIS_MPU */ -#endif - - -/** - \ingroup CMSIS_core_register - \defgroup CMSIS_CoreDebug Core Debug Registers (CoreDebug) - \brief Type definitions for the Core Debug Registers - @{ - */ - -/** - \brief Structure type to access the Core Debug Register (CoreDebug). - */ -typedef struct -{ - __IOM uint32_t DHCSR; /*!< Offset: 0x000 (R/W) Debug Halting Control and Status Register */ - __OM uint32_t DCRSR; /*!< Offset: 0x004 ( /W) Debug Core Register Selector Register */ - __IOM uint32_t DCRDR; /*!< Offset: 0x008 (R/W) Debug Core Register Data Register */ - __IOM uint32_t DEMCR; /*!< Offset: 0x00C (R/W) Debug Exception and Monitor Control Register */ -} CoreDebug_Type; - -/* Debug Halting Control and Status Register Definitions */ -#define CoreDebug_DHCSR_DBGKEY_Pos 16U /*!< CoreDebug DHCSR: DBGKEY Position */ -#define CoreDebug_DHCSR_DBGKEY_Msk (0xFFFFUL << CoreDebug_DHCSR_DBGKEY_Pos) /*!< CoreDebug DHCSR: DBGKEY Mask */ - -#define CoreDebug_DHCSR_S_RESET_ST_Pos 25U /*!< CoreDebug DHCSR: S_RESET_ST Position */ -#define CoreDebug_DHCSR_S_RESET_ST_Msk (1UL << CoreDebug_DHCSR_S_RESET_ST_Pos) /*!< CoreDebug DHCSR: S_RESET_ST Mask */ - -#define CoreDebug_DHCSR_S_RETIRE_ST_Pos 24U /*!< CoreDebug DHCSR: S_RETIRE_ST Position */ -#define CoreDebug_DHCSR_S_RETIRE_ST_Msk (1UL << CoreDebug_DHCSR_S_RETIRE_ST_Pos) /*!< CoreDebug DHCSR: S_RETIRE_ST Mask */ - -#define CoreDebug_DHCSR_S_LOCKUP_Pos 19U /*!< CoreDebug DHCSR: S_LOCKUP Position */ -#define CoreDebug_DHCSR_S_LOCKUP_Msk (1UL << CoreDebug_DHCSR_S_LOCKUP_Pos) /*!< CoreDebug DHCSR: S_LOCKUP Mask */ - -#define CoreDebug_DHCSR_S_SLEEP_Pos 18U /*!< CoreDebug DHCSR: S_SLEEP Position */ -#define CoreDebug_DHCSR_S_SLEEP_Msk (1UL << CoreDebug_DHCSR_S_SLEEP_Pos) /*!< CoreDebug DHCSR: S_SLEEP Mask */ - -#define CoreDebug_DHCSR_S_HALT_Pos 17U /*!< CoreDebug DHCSR: S_HALT Position */ -#define CoreDebug_DHCSR_S_HALT_Msk (1UL << CoreDebug_DHCSR_S_HALT_Pos) /*!< CoreDebug DHCSR: S_HALT Mask */ - -#define CoreDebug_DHCSR_S_REGRDY_Pos 16U /*!< CoreDebug DHCSR: S_REGRDY Position */ -#define CoreDebug_DHCSR_S_REGRDY_Msk (1UL << CoreDebug_DHCSR_S_REGRDY_Pos) /*!< CoreDebug DHCSR: S_REGRDY Mask */ - -#define CoreDebug_DHCSR_C_SNAPSTALL_Pos 5U /*!< CoreDebug DHCSR: C_SNAPSTALL Position */ -#define CoreDebug_DHCSR_C_SNAPSTALL_Msk (1UL << CoreDebug_DHCSR_C_SNAPSTALL_Pos) /*!< CoreDebug DHCSR: C_SNAPSTALL Mask */ - -#define CoreDebug_DHCSR_C_MASKINTS_Pos 3U /*!< CoreDebug DHCSR: C_MASKINTS Position */ -#define CoreDebug_DHCSR_C_MASKINTS_Msk (1UL << CoreDebug_DHCSR_C_MASKINTS_Pos) /*!< CoreDebug DHCSR: C_MASKINTS Mask */ - -#define CoreDebug_DHCSR_C_STEP_Pos 2U /*!< CoreDebug DHCSR: C_STEP Position */ -#define CoreDebug_DHCSR_C_STEP_Msk (1UL << CoreDebug_DHCSR_C_STEP_Pos) /*!< CoreDebug DHCSR: C_STEP Mask */ - -#define CoreDebug_DHCSR_C_HALT_Pos 1U /*!< CoreDebug DHCSR: C_HALT Position */ -#define CoreDebug_DHCSR_C_HALT_Msk (1UL << CoreDebug_DHCSR_C_HALT_Pos) /*!< CoreDebug DHCSR: C_HALT Mask */ - -#define CoreDebug_DHCSR_C_DEBUGEN_Pos 0U /*!< CoreDebug DHCSR: C_DEBUGEN Position */ -#define CoreDebug_DHCSR_C_DEBUGEN_Msk (1UL /*<< CoreDebug_DHCSR_C_DEBUGEN_Pos*/) /*!< CoreDebug DHCSR: C_DEBUGEN Mask */ - -/* Debug Core Register Selector Register Definitions */ -#define CoreDebug_DCRSR_REGWnR_Pos 16U /*!< CoreDebug DCRSR: REGWnR Position */ -#define CoreDebug_DCRSR_REGWnR_Msk (1UL << CoreDebug_DCRSR_REGWnR_Pos) /*!< CoreDebug DCRSR: REGWnR Mask */ - -#define CoreDebug_DCRSR_REGSEL_Pos 0U /*!< CoreDebug DCRSR: REGSEL Position */ -#define CoreDebug_DCRSR_REGSEL_Msk (0x1FUL /*<< CoreDebug_DCRSR_REGSEL_Pos*/) /*!< CoreDebug DCRSR: REGSEL Mask */ - -/* Debug Exception and Monitor Control Register Definitions */ -#define CoreDebug_DEMCR_TRCENA_Pos 24U /*!< CoreDebug DEMCR: TRCENA Position */ -#define CoreDebug_DEMCR_TRCENA_Msk (1UL << CoreDebug_DEMCR_TRCENA_Pos) /*!< CoreDebug DEMCR: TRCENA Mask */ - -#define CoreDebug_DEMCR_MON_REQ_Pos 19U /*!< CoreDebug DEMCR: MON_REQ Position */ -#define CoreDebug_DEMCR_MON_REQ_Msk (1UL << CoreDebug_DEMCR_MON_REQ_Pos) /*!< CoreDebug DEMCR: MON_REQ Mask */ - -#define CoreDebug_DEMCR_MON_STEP_Pos 18U /*!< CoreDebug DEMCR: MON_STEP Position */ -#define CoreDebug_DEMCR_MON_STEP_Msk (1UL << CoreDebug_DEMCR_MON_STEP_Pos) /*!< CoreDebug DEMCR: MON_STEP Mask */ - -#define CoreDebug_DEMCR_MON_PEND_Pos 17U /*!< CoreDebug DEMCR: MON_PEND Position */ -#define CoreDebug_DEMCR_MON_PEND_Msk (1UL << CoreDebug_DEMCR_MON_PEND_Pos) /*!< CoreDebug DEMCR: MON_PEND Mask */ - -#define CoreDebug_DEMCR_MON_EN_Pos 16U /*!< CoreDebug DEMCR: MON_EN Position */ -#define CoreDebug_DEMCR_MON_EN_Msk (1UL << CoreDebug_DEMCR_MON_EN_Pos) /*!< CoreDebug DEMCR: MON_EN Mask */ - -#define CoreDebug_DEMCR_VC_HARDERR_Pos 10U /*!< CoreDebug DEMCR: VC_HARDERR Position */ -#define CoreDebug_DEMCR_VC_HARDERR_Msk (1UL << CoreDebug_DEMCR_VC_HARDERR_Pos) /*!< CoreDebug DEMCR: VC_HARDERR Mask */ - -#define CoreDebug_DEMCR_VC_INTERR_Pos 9U /*!< CoreDebug DEMCR: VC_INTERR Position */ -#define CoreDebug_DEMCR_VC_INTERR_Msk (1UL << CoreDebug_DEMCR_VC_INTERR_Pos) /*!< CoreDebug DEMCR: VC_INTERR Mask */ - -#define CoreDebug_DEMCR_VC_BUSERR_Pos 8U /*!< CoreDebug DEMCR: VC_BUSERR Position */ -#define CoreDebug_DEMCR_VC_BUSERR_Msk (1UL << CoreDebug_DEMCR_VC_BUSERR_Pos) /*!< CoreDebug DEMCR: VC_BUSERR Mask */ - -#define CoreDebug_DEMCR_VC_STATERR_Pos 7U /*!< CoreDebug DEMCR: VC_STATERR Position */ -#define CoreDebug_DEMCR_VC_STATERR_Msk (1UL << CoreDebug_DEMCR_VC_STATERR_Pos) /*!< CoreDebug DEMCR: VC_STATERR Mask */ - -#define CoreDebug_DEMCR_VC_CHKERR_Pos 6U /*!< CoreDebug DEMCR: VC_CHKERR Position */ -#define CoreDebug_DEMCR_VC_CHKERR_Msk (1UL << CoreDebug_DEMCR_VC_CHKERR_Pos) /*!< CoreDebug DEMCR: VC_CHKERR Mask */ - -#define CoreDebug_DEMCR_VC_NOCPERR_Pos 5U /*!< CoreDebug DEMCR: VC_NOCPERR Position */ -#define CoreDebug_DEMCR_VC_NOCPERR_Msk (1UL << CoreDebug_DEMCR_VC_NOCPERR_Pos) /*!< CoreDebug DEMCR: VC_NOCPERR Mask */ - -#define CoreDebug_DEMCR_VC_MMERR_Pos 4U /*!< CoreDebug DEMCR: VC_MMERR Position */ -#define CoreDebug_DEMCR_VC_MMERR_Msk (1UL << CoreDebug_DEMCR_VC_MMERR_Pos) /*!< CoreDebug DEMCR: VC_MMERR Mask */ - -#define CoreDebug_DEMCR_VC_CORERESET_Pos 0U /*!< CoreDebug DEMCR: VC_CORERESET Position */ -#define CoreDebug_DEMCR_VC_CORERESET_Msk (1UL /*<< CoreDebug_DEMCR_VC_CORERESET_Pos*/) /*!< CoreDebug DEMCR: VC_CORERESET Mask */ - -/*@} end of group CMSIS_CoreDebug */ - - -/** - \ingroup CMSIS_core_register - \defgroup CMSIS_core_bitfield Core register bit field macros - \brief Macros for use with bit field definitions (xxx_Pos, xxx_Msk). - @{ - */ - -/** - \brief Mask and shift a bit field value for use in a register bit range. - \param[in] field Name of the register bit field. - \param[in] value Value of the bit field. This parameter is interpreted as an uint32_t type. - \return Masked and shifted value. -*/ -#define _VAL2FLD(field, value) (((uint32_t)(value) << field ## _Pos) & field ## _Msk) - -/** - \brief Mask and shift a register value to extract a bit filed value. - \param[in] field Name of the register bit field. - \param[in] value Value of register. This parameter is interpreted as an uint32_t type. - \return Masked and shifted bit field value. -*/ -#define _FLD2VAL(field, value) (((uint32_t)(value) & field ## _Msk) >> field ## _Pos) - -/*@} end of group CMSIS_core_bitfield */ - - -/** - \ingroup CMSIS_core_register - \defgroup CMSIS_core_base Core Definitions - \brief Definitions for base addresses, unions, and structures. - @{ - */ - -/* Memory mapping of Core Hardware */ -#define SCS_BASE (0xE000E000UL) /*!< System Control Space Base Address */ -#define ITM_BASE (0xE0000000UL) /*!< ITM Base Address */ -#define DWT_BASE (0xE0001000UL) /*!< DWT Base Address */ -#define TPI_BASE (0xE0040000UL) /*!< TPI Base Address */ -#define CoreDebug_BASE (0xE000EDF0UL) /*!< Core Debug Base Address */ -#define SysTick_BASE (SCS_BASE + 0x0010UL) /*!< SysTick Base Address */ -#define NVIC_BASE (SCS_BASE + 0x0100UL) /*!< NVIC Base Address */ -#define SCB_BASE (SCS_BASE + 0x0D00UL) /*!< System Control Block Base Address */ - -#define SCnSCB ((SCnSCB_Type *) SCS_BASE ) /*!< System control Register not in SCB */ -#define SCB ((SCB_Type *) SCB_BASE ) /*!< SCB configuration struct */ -#define SysTick ((SysTick_Type *) SysTick_BASE ) /*!< SysTick configuration struct */ -#define NVIC ((NVIC_Type *) NVIC_BASE ) /*!< NVIC configuration struct */ -#define ITM ((ITM_Type *) ITM_BASE ) /*!< ITM configuration struct */ -#define DWT ((DWT_Type *) DWT_BASE ) /*!< DWT configuration struct */ -#define TPI ((TPI_Type *) TPI_BASE ) /*!< TPI configuration struct */ -#define CoreDebug ((CoreDebug_Type *) CoreDebug_BASE) /*!< Core Debug configuration struct */ - -#if defined (__MPU_PRESENT) && (__MPU_PRESENT == 1U) - #define MPU_BASE (SCS_BASE + 0x0D90UL) /*!< Memory Protection Unit */ - #define MPU ((MPU_Type *) MPU_BASE ) /*!< Memory Protection Unit */ -#endif - -/*@} */ - - - -/******************************************************************************* - * Hardware Abstraction Layer - Core Function Interface contains: - - Core NVIC Functions - - Core SysTick Functions - - Core Debug Functions - - Core Register Access Functions - ******************************************************************************/ -/** - \defgroup CMSIS_Core_FunctionInterface Functions and Instructions Reference -*/ - - - -/* ########################## NVIC functions #################################### */ -/** - \ingroup CMSIS_Core_FunctionInterface - \defgroup CMSIS_Core_NVICFunctions NVIC Functions - \brief Functions that manage interrupts and exceptions via the NVIC. - @{ - */ - -#ifdef CMSIS_NVIC_VIRTUAL - #ifndef CMSIS_NVIC_VIRTUAL_HEADER_FILE - #define CMSIS_NVIC_VIRTUAL_HEADER_FILE "cmsis_nvic_virtual.h" - #endif - #include CMSIS_NVIC_VIRTUAL_HEADER_FILE -#else - #define NVIC_SetPriorityGrouping __NVIC_SetPriorityGrouping - #define NVIC_GetPriorityGrouping __NVIC_GetPriorityGrouping - #define NVIC_EnableIRQ __NVIC_EnableIRQ - #define NVIC_GetEnableIRQ __NVIC_GetEnableIRQ - #define NVIC_DisableIRQ __NVIC_DisableIRQ - #define NVIC_GetPendingIRQ __NVIC_GetPendingIRQ - #define NVIC_SetPendingIRQ __NVIC_SetPendingIRQ - #define NVIC_ClearPendingIRQ __NVIC_ClearPendingIRQ - #define NVIC_GetActive __NVIC_GetActive - #define NVIC_SetPriority __NVIC_SetPriority - #define NVIC_GetPriority __NVIC_GetPriority - #define NVIC_SystemReset __NVIC_SystemReset -#endif /* CMSIS_NVIC_VIRTUAL */ - -#ifdef CMSIS_VECTAB_VIRTUAL - #ifndef CMSIS_VECTAB_VIRTUAL_HEADER_FILE - #define CMSIS_VECTAB_VIRTUAL_HEADER_FILE "cmsis_vectab_virtual.h" - #endif - #include CMSIS_VECTAB_VIRTUAL_HEADER_FILE -#else - #define NVIC_SetVector __NVIC_SetVector - #define NVIC_GetVector __NVIC_GetVector -#endif /* (CMSIS_VECTAB_VIRTUAL) */ - -#define NVIC_USER_IRQ_OFFSET 16 - - -/* The following EXC_RETURN values are saved the LR on exception entry */ -#define EXC_RETURN_HANDLER (0xFFFFFFF1UL) /* return to Handler mode, uses MSP after return */ -#define EXC_RETURN_THREAD_MSP (0xFFFFFFF9UL) /* return to Thread mode, uses MSP after return */ -#define EXC_RETURN_THREAD_PSP (0xFFFFFFFDUL) /* return to Thread mode, uses PSP after return */ - - -/** - \brief Set Priority Grouping - \details Sets the priority grouping field using the required unlock sequence. - The parameter PriorityGroup is assigned to the field SCB->AIRCR [10:8] PRIGROUP field. - Only values from 0..7 are used. - In case of a conflict between priority grouping and available - priority bits (__NVIC_PRIO_BITS), the smallest possible priority group is set. - \param [in] PriorityGroup Priority grouping field. - */ -__STATIC_INLINE void __NVIC_SetPriorityGrouping(uint32_t PriorityGroup) -{ - uint32_t reg_value; - uint32_t PriorityGroupTmp = (PriorityGroup & (uint32_t)0x07UL); /* only values 0..7 are used */ - - reg_value = SCB->AIRCR; /* read old register configuration */ - reg_value &= ~((uint32_t)(SCB_AIRCR_VECTKEY_Msk | SCB_AIRCR_PRIGROUP_Msk)); /* clear bits to change */ - reg_value = (reg_value | - ((uint32_t)0x5FAUL << SCB_AIRCR_VECTKEY_Pos) | - (PriorityGroupTmp << SCB_AIRCR_PRIGROUP_Pos) ); /* Insert write key and priority group */ - SCB->AIRCR = reg_value; -} - - -/** - \brief Get Priority Grouping - \details Reads the priority grouping field from the NVIC Interrupt Controller. - \return Priority grouping field (SCB->AIRCR [10:8] PRIGROUP field). - */ -__STATIC_INLINE uint32_t __NVIC_GetPriorityGrouping(void) -{ - return ((uint32_t)((SCB->AIRCR & SCB_AIRCR_PRIGROUP_Msk) >> SCB_AIRCR_PRIGROUP_Pos)); -} - - -/** - \brief Enable Interrupt - \details Enables a device specific interrupt in the NVIC interrupt controller. - \param [in] IRQn Device specific interrupt number. - \note IRQn must not be negative. - */ -__STATIC_INLINE void __NVIC_EnableIRQ(IRQn_Type IRQn) -{ - if ((int32_t)(IRQn) >= 0) - { - NVIC->ISER[(((uint32_t)IRQn) >> 5UL)] = (uint32_t)(1UL << (((uint32_t)IRQn) & 0x1FUL)); - } -} - - -/** - \brief Get Interrupt Enable status - \details Returns a device specific interrupt enable status from the NVIC interrupt controller. - \param [in] IRQn Device specific interrupt number. - \return 0 Interrupt is not enabled. - \return 1 Interrupt is enabled. - \note IRQn must not be negative. - */ -__STATIC_INLINE uint32_t __NVIC_GetEnableIRQ(IRQn_Type IRQn) -{ - if ((int32_t)(IRQn) >= 0) - { - return((uint32_t)(((NVIC->ISER[(((uint32_t)IRQn) >> 5UL)] & (1UL << (((uint32_t)IRQn) & 0x1FUL))) != 0UL) ? 1UL : 0UL)); - } - else - { - return(0U); - } -} - - -/** - \brief Disable Interrupt - \details Disables a device specific interrupt in the NVIC interrupt controller. - \param [in] IRQn Device specific interrupt number. - \note IRQn must not be negative. - */ -__STATIC_INLINE void __NVIC_DisableIRQ(IRQn_Type IRQn) -{ - if ((int32_t)(IRQn) >= 0) - { - NVIC->ICER[(((uint32_t)IRQn) >> 5UL)] = (uint32_t)(1UL << (((uint32_t)IRQn) & 0x1FUL)); - __DSB(); - __ISB(); - } -} - - -/** - \brief Get Pending Interrupt - \details Reads the NVIC pending register and returns the pending bit for the specified device specific interrupt. - \param [in] IRQn Device specific interrupt number. - \return 0 Interrupt status is not pending. - \return 1 Interrupt status is pending. - \note IRQn must not be negative. - */ -__STATIC_INLINE uint32_t __NVIC_GetPendingIRQ(IRQn_Type IRQn) -{ - if ((int32_t)(IRQn) >= 0) - { - return((uint32_t)(((NVIC->ISPR[(((uint32_t)IRQn) >> 5UL)] & (1UL << (((uint32_t)IRQn) & 0x1FUL))) != 0UL) ? 1UL : 0UL)); - } - else - { - return(0U); - } -} - - -/** - \brief Set Pending Interrupt - \details Sets the pending bit of a device specific interrupt in the NVIC pending register. - \param [in] IRQn Device specific interrupt number. - \note IRQn must not be negative. - */ -__STATIC_INLINE void __NVIC_SetPendingIRQ(IRQn_Type IRQn) -{ - if ((int32_t)(IRQn) >= 0) - { - NVIC->ISPR[(((uint32_t)IRQn) >> 5UL)] = (uint32_t)(1UL << (((uint32_t)IRQn) & 0x1FUL)); - } -} - - -/** - \brief Clear Pending Interrupt - \details Clears the pending bit of a device specific interrupt in the NVIC pending register. - \param [in] IRQn Device specific interrupt number. - \note IRQn must not be negative. - */ -__STATIC_INLINE void __NVIC_ClearPendingIRQ(IRQn_Type IRQn) -{ - if ((int32_t)(IRQn) >= 0) - { - NVIC->ICPR[(((uint32_t)IRQn) >> 5UL)] = (uint32_t)(1UL << (((uint32_t)IRQn) & 0x1FUL)); - } -} - - -/** - \brief Get Active Interrupt - \details Reads the active register in the NVIC and returns the active bit for the device specific interrupt. - \param [in] IRQn Device specific interrupt number. - \return 0 Interrupt status is not active. - \return 1 Interrupt status is active. - \note IRQn must not be negative. - */ -__STATIC_INLINE uint32_t __NVIC_GetActive(IRQn_Type IRQn) -{ - if ((int32_t)(IRQn) >= 0) - { - return((uint32_t)(((NVIC->IABR[(((uint32_t)IRQn) >> 5UL)] & (1UL << (((uint32_t)IRQn) & 0x1FUL))) != 0UL) ? 1UL : 0UL)); - } - else - { - return(0U); - } -} - - -/** - \brief Set Interrupt Priority - \details Sets the priority of a device specific interrupt or a processor exception. - The interrupt number can be positive to specify a device specific interrupt, - or negative to specify a processor exception. - \param [in] IRQn Interrupt number. - \param [in] priority Priority to set. - \note The priority cannot be set for every processor exception. - */ -__STATIC_INLINE void __NVIC_SetPriority(IRQn_Type IRQn, uint32_t priority) -{ - if ((int32_t)(IRQn) >= 0) - { - NVIC->IP[((uint32_t)IRQn)] = (uint8_t)((priority << (8U - __NVIC_PRIO_BITS)) & (uint32_t)0xFFUL); - } - else - { - SCB->SHP[(((uint32_t)IRQn) & 0xFUL)-4UL] = (uint8_t)((priority << (8U - __NVIC_PRIO_BITS)) & (uint32_t)0xFFUL); - } -} - - -/** - \brief Get Interrupt Priority - \details Reads the priority of a device specific interrupt or a processor exception. - The interrupt number can be positive to specify a device specific interrupt, - or negative to specify a processor exception. - \param [in] IRQn Interrupt number. - \return Interrupt Priority. - Value is aligned automatically to the implemented priority bits of the microcontroller. - */ -__STATIC_INLINE uint32_t __NVIC_GetPriority(IRQn_Type IRQn) -{ - - if ((int32_t)(IRQn) >= 0) - { - return(((uint32_t)NVIC->IP[((uint32_t)IRQn)] >> (8U - __NVIC_PRIO_BITS))); - } - else - { - return(((uint32_t)SCB->SHP[(((uint32_t)IRQn) & 0xFUL)-4UL] >> (8U - __NVIC_PRIO_BITS))); - } -} - - -/** - \brief Encode Priority - \details Encodes the priority for an interrupt with the given priority group, - preemptive priority value, and subpriority value. - In case of a conflict between priority grouping and available - priority bits (__NVIC_PRIO_BITS), the smallest possible priority group is set. - \param [in] PriorityGroup Used priority group. - \param [in] PreemptPriority Preemptive priority value (starting from 0). - \param [in] SubPriority Subpriority value (starting from 0). - \return Encoded priority. Value can be used in the function \ref NVIC_SetPriority(). - */ -__STATIC_INLINE uint32_t NVIC_EncodePriority (uint32_t PriorityGroup, uint32_t PreemptPriority, uint32_t SubPriority) -{ - uint32_t PriorityGroupTmp = (PriorityGroup & (uint32_t)0x07UL); /* only values 0..7 are used */ - uint32_t PreemptPriorityBits; - uint32_t SubPriorityBits; - - PreemptPriorityBits = ((7UL - PriorityGroupTmp) > (uint32_t)(__NVIC_PRIO_BITS)) ? (uint32_t)(__NVIC_PRIO_BITS) : (uint32_t)(7UL - PriorityGroupTmp); - SubPriorityBits = ((PriorityGroupTmp + (uint32_t)(__NVIC_PRIO_BITS)) < (uint32_t)7UL) ? (uint32_t)0UL : (uint32_t)((PriorityGroupTmp - 7UL) + (uint32_t)(__NVIC_PRIO_BITS)); - - return ( - ((PreemptPriority & (uint32_t)((1UL << (PreemptPriorityBits)) - 1UL)) << SubPriorityBits) | - ((SubPriority & (uint32_t)((1UL << (SubPriorityBits )) - 1UL))) - ); -} - - -/** - \brief Decode Priority - \details Decodes an interrupt priority value with a given priority group to - preemptive priority value and subpriority value. - In case of a conflict between priority grouping and available - priority bits (__NVIC_PRIO_BITS) the smallest possible priority group is set. - \param [in] Priority Priority value, which can be retrieved with the function \ref NVIC_GetPriority(). - \param [in] PriorityGroup Used priority group. - \param [out] pPreemptPriority Preemptive priority value (starting from 0). - \param [out] pSubPriority Subpriority value (starting from 0). - */ -__STATIC_INLINE void NVIC_DecodePriority (uint32_t Priority, uint32_t PriorityGroup, uint32_t* const pPreemptPriority, uint32_t* const pSubPriority) -{ - uint32_t PriorityGroupTmp = (PriorityGroup & (uint32_t)0x07UL); /* only values 0..7 are used */ - uint32_t PreemptPriorityBits; - uint32_t SubPriorityBits; - - PreemptPriorityBits = ((7UL - PriorityGroupTmp) > (uint32_t)(__NVIC_PRIO_BITS)) ? (uint32_t)(__NVIC_PRIO_BITS) : (uint32_t)(7UL - PriorityGroupTmp); - SubPriorityBits = ((PriorityGroupTmp + (uint32_t)(__NVIC_PRIO_BITS)) < (uint32_t)7UL) ? (uint32_t)0UL : (uint32_t)((PriorityGroupTmp - 7UL) + (uint32_t)(__NVIC_PRIO_BITS)); - - *pPreemptPriority = (Priority >> SubPriorityBits) & (uint32_t)((1UL << (PreemptPriorityBits)) - 1UL); - *pSubPriority = (Priority ) & (uint32_t)((1UL << (SubPriorityBits )) - 1UL); -} - - -/** - \brief Set Interrupt Vector - \details Sets an interrupt vector in SRAM based interrupt vector table. - The interrupt number can be positive to specify a device specific interrupt, - or negative to specify a processor exception. - VTOR must been relocated to SRAM before. - \param [in] IRQn Interrupt number - \param [in] vector Address of interrupt handler function - */ -__STATIC_INLINE void __NVIC_SetVector(IRQn_Type IRQn, uint32_t vector) -{ - uint32_t *vectors = (uint32_t *)SCB->VTOR; - vectors[(int32_t)IRQn + NVIC_USER_IRQ_OFFSET] = vector; -} - - -/** - \brief Get Interrupt Vector - \details Reads an interrupt vector from interrupt vector table. - The interrupt number can be positive to specify a device specific interrupt, - or negative to specify a processor exception. - \param [in] IRQn Interrupt number. - \return Address of interrupt handler function - */ -__STATIC_INLINE uint32_t __NVIC_GetVector(IRQn_Type IRQn) -{ - uint32_t *vectors = (uint32_t *)SCB->VTOR; - return vectors[(int32_t)IRQn + NVIC_USER_IRQ_OFFSET]; -} - - -/** - \brief System Reset - \details Initiates a system reset request to reset the MCU. - */ -__NO_RETURN __STATIC_INLINE void __NVIC_SystemReset(void) -{ - __DSB(); /* Ensure all outstanding memory accesses included - buffered write are completed before reset */ - SCB->AIRCR = (uint32_t)((0x5FAUL << SCB_AIRCR_VECTKEY_Pos) | - (SCB->AIRCR & SCB_AIRCR_PRIGROUP_Msk) | - SCB_AIRCR_SYSRESETREQ_Msk ); /* Keep priority group unchanged */ - __DSB(); /* Ensure completion of memory access */ - - for(;;) /* wait until reset */ - { - __NOP(); - } -} - -/*@} end of CMSIS_Core_NVICFunctions */ - -/* ########################## MPU functions #################################### */ - -#if defined (__MPU_PRESENT) && (__MPU_PRESENT == 1U) - -#include "mpu_armv7.h" - -#endif - -/* ########################## FPU functions #################################### */ -/** - \ingroup CMSIS_Core_FunctionInterface - \defgroup CMSIS_Core_FpuFunctions FPU Functions - \brief Function that provides FPU type. - @{ - */ - -/** - \brief get FPU type - \details returns the FPU type - \returns - - \b 0: No FPU - - \b 1: Single precision FPU - - \b 2: Double + Single precision FPU - */ -__STATIC_INLINE uint32_t SCB_GetFPUType(void) -{ - return 0U; /* No FPU */ -} - - -/*@} end of CMSIS_Core_FpuFunctions */ - - - -/* ################################## SysTick function ############################################ */ -/** - \ingroup CMSIS_Core_FunctionInterface - \defgroup CMSIS_Core_SysTickFunctions SysTick Functions - \brief Functions that configure the System. - @{ - */ - -#if defined (__Vendor_SysTickConfig) && (__Vendor_SysTickConfig == 0U) - -/** - \brief System Tick Configuration - \details Initializes the System Timer and its interrupt, and starts the System Tick Timer. - Counter is in free running mode to generate periodic interrupts. - \param [in] ticks Number of ticks between two interrupts. - \return 0 Function succeeded. - \return 1 Function failed. - \note When the variable __Vendor_SysTickConfig is set to 1, then the - function SysTick_Config is not included. In this case, the file device.h - must contain a vendor-specific implementation of this function. - */ -__STATIC_INLINE uint32_t SysTick_Config(uint32_t ticks) -{ - if ((ticks - 1UL) > SysTick_LOAD_RELOAD_Msk) - { - return (1UL); /* Reload value impossible */ - } - - SysTick->LOAD = (uint32_t)(ticks - 1UL); /* set reload register */ - NVIC_SetPriority (SysTick_IRQn, (1UL << __NVIC_PRIO_BITS) - 1UL); /* set Priority for Systick Interrupt */ - SysTick->VAL = 0UL; /* Load the SysTick Counter Value */ - SysTick->CTRL = SysTick_CTRL_CLKSOURCE_Msk | - SysTick_CTRL_TICKINT_Msk | - SysTick_CTRL_ENABLE_Msk; /* Enable SysTick IRQ and SysTick Timer */ - return (0UL); /* Function successful */ -} - -#endif - -/*@} end of CMSIS_Core_SysTickFunctions */ - - - -/* ##################################### Debug In/Output function ########################################### */ -/** - \ingroup CMSIS_Core_FunctionInterface - \defgroup CMSIS_core_DebugFunctions ITM Functions - \brief Functions that access the ITM debug interface. - @{ - */ - -extern volatile int32_t ITM_RxBuffer; /*!< External variable to receive characters. */ -#define ITM_RXBUFFER_EMPTY ((int32_t)0x5AA55AA5U) /*!< Value identifying \ref ITM_RxBuffer is ready for next character. */ - - -/** - \brief ITM Send Character - \details Transmits a character via the ITM channel 0, and - \li Just returns when no debugger is connected that has booked the output. - \li Is blocking when a debugger is connected, but the previous character sent has not been transmitted. - \param [in] ch Character to transmit. - \returns Character to transmit. - */ -__STATIC_INLINE uint32_t ITM_SendChar (uint32_t ch) -{ - if (((ITM->TCR & ITM_TCR_ITMENA_Msk) != 0UL) && /* ITM enabled */ - ((ITM->TER & 1UL ) != 0UL) ) /* ITM Port #0 enabled */ - { - while (ITM->PORT[0U].u32 == 0UL) - { - __NOP(); - } - ITM->PORT[0U].u8 = (uint8_t)ch; - } - return (ch); -} - - -/** - \brief ITM Receive Character - \details Inputs a character via the external variable \ref ITM_RxBuffer. - \return Received character. - \return -1 No character pending. - */ -__STATIC_INLINE int32_t ITM_ReceiveChar (void) -{ - int32_t ch = -1; /* no character available */ - - if (ITM_RxBuffer != ITM_RXBUFFER_EMPTY) - { - ch = ITM_RxBuffer; - ITM_RxBuffer = ITM_RXBUFFER_EMPTY; /* ready for next character */ - } - - return (ch); -} - - -/** - \brief ITM Check Character - \details Checks whether a character is pending for reading in the variable \ref ITM_RxBuffer. - \return 0 No character available. - \return 1 Character available. - */ -__STATIC_INLINE int32_t ITM_CheckChar (void) -{ - - if (ITM_RxBuffer == ITM_RXBUFFER_EMPTY) - { - return (0); /* no character available */ - } - else - { - return (1); /* character available */ - } -} - -/*@} end of CMSIS_core_DebugFunctions */ - - - - -#ifdef __cplusplus -} -#endif - -#endif /* __CORE_CM3_H_DEPENDANT */ - -#endif /* __CMSIS_GENERIC */ diff --git a/test_dma/Drivers/CMSIS/Include/core_cm33.h b/test_dma/Drivers/CMSIS/Include/core_cm33.h deleted file mode 100644 index 02f82e2..0000000 --- a/test_dma/Drivers/CMSIS/Include/core_cm33.h +++ /dev/null @@ -1,3002 +0,0 @@ -/**************************************************************************//** - * @file core_cm33.h - * @brief CMSIS Cortex-M33 Core Peripheral Access Layer Header File - * @version V5.0.9 - * @date 06. July 2018 - ******************************************************************************/ -/* - * Copyright (c) 2009-2018 Arm Limited. All rights reserved. - * - * SPDX-License-Identifier: Apache-2.0 - * - * Licensed under the Apache License, Version 2.0 (the License); you may - * not use this file except in compliance with the License. - * You may obtain a copy of the License at - * - * www.apache.org/licenses/LICENSE-2.0 - * - * Unless required by applicable law or agreed to in writing, software - * distributed under the License is distributed on an AS IS BASIS, WITHOUT - * WARRANTIES OR CONDITIONS OF ANY KIND, either express or implied. - * See the License for the specific language governing permissions and - * limitations under the License. - */ - -#if defined ( __ICCARM__ ) - #pragma system_include /* treat file as system include file for MISRA check */ -#elif defined (__clang__) - #pragma clang system_header /* treat file as system include file */ -#endif - -#ifndef __CORE_CM33_H_GENERIC -#define __CORE_CM33_H_GENERIC - -#include - -#ifdef __cplusplus - extern "C" { -#endif - -/** - \page CMSIS_MISRA_Exceptions MISRA-C:2004 Compliance Exceptions - CMSIS violates the following MISRA-C:2004 rules: - - \li Required Rule 8.5, object/function definition in header file.
- Function definitions in header files are used to allow 'inlining'. - - \li Required Rule 18.4, declaration of union type or object of union type: '{...}'.
- Unions are used for effective representation of core registers. - - \li Advisory Rule 19.7, Function-like macro defined.
- Function-like macros are used to allow more efficient code. - */ - - -/******************************************************************************* - * CMSIS definitions - ******************************************************************************/ -/** - \ingroup Cortex_M33 - @{ - */ - -#include "cmsis_version.h" - -/* CMSIS CM33 definitions */ -#define __CM33_CMSIS_VERSION_MAIN (__CM_CMSIS_VERSION_MAIN) /*!< \deprecated [31:16] CMSIS HAL main version */ -#define __CM33_CMSIS_VERSION_SUB (__CM_CMSIS_VERSION_SUB) /*!< \deprecated [15:0] CMSIS HAL sub version */ -#define __CM33_CMSIS_VERSION ((__CM33_CMSIS_VERSION_MAIN << 16U) | \ - __CM33_CMSIS_VERSION_SUB ) /*!< \deprecated CMSIS HAL version number */ - -#define __CORTEX_M (33U) /*!< Cortex-M Core */ - -/** __FPU_USED indicates whether an FPU is used or not. - For this, __FPU_PRESENT has to be checked prior to making use of FPU specific registers and functions. -*/ -#if defined ( __CC_ARM ) - #if defined (__TARGET_FPU_VFP) - #if defined (__FPU_PRESENT) && (__FPU_PRESENT == 1U) - #define __FPU_USED 1U - #else - #error "Compiler generates FPU instructions for a device without an FPU (check __FPU_PRESENT)" - #define __FPU_USED 0U - #endif - #else - #define __FPU_USED 0U - #endif - - #if defined (__ARM_FEATURE_DSP) && (__ARM_FEATURE_DSP == 1U) - #if defined (__DSP_PRESENT) && (__DSP_PRESENT == 1U) - #define __DSP_USED 1U - #else - #error "Compiler generates DSP (SIMD) instructions for a devices without DSP extensions (check __DSP_PRESENT)" - #define __DSP_USED 0U - #endif - #else - #define __DSP_USED 0U - #endif - -#elif defined (__ARMCC_VERSION) && (__ARMCC_VERSION >= 6010050) - #if defined (__ARM_PCS_VFP) - #if defined (__FPU_PRESENT) && (__FPU_PRESENT == 1U) - #define __FPU_USED 1U - #else - #warning "Compiler generates FPU instructions for a device without an FPU (check __FPU_PRESENT)" - #define __FPU_USED 0U - #endif - #else - #define __FPU_USED 0U - #endif - - #if defined (__ARM_FEATURE_DSP) && (__ARM_FEATURE_DSP == 1U) - #if defined (__DSP_PRESENT) && (__DSP_PRESENT == 1U) - #define __DSP_USED 1U - #else - #error "Compiler generates DSP (SIMD) instructions for a devices without DSP extensions (check __DSP_PRESENT)" - #define __DSP_USED 0U - #endif - #else - #define __DSP_USED 0U - #endif - -#elif defined ( __GNUC__ ) - #if defined (__VFP_FP__) && !defined(__SOFTFP__) - #if defined (__FPU_PRESENT) && (__FPU_PRESENT == 1U) - #define __FPU_USED 1U - #else - #error "Compiler generates FPU instructions for a device without an FPU (check __FPU_PRESENT)" - #define __FPU_USED 0U - #endif - #else - #define __FPU_USED 0U - #endif - - #if defined (__ARM_FEATURE_DSP) && (__ARM_FEATURE_DSP == 1U) - #if defined (__DSP_PRESENT) && (__DSP_PRESENT == 1U) - #define __DSP_USED 1U - #else - #error "Compiler generates DSP (SIMD) instructions for a devices without DSP extensions (check __DSP_PRESENT)" - #define __DSP_USED 0U - #endif - #else - #define __DSP_USED 0U - #endif - -#elif defined ( __ICCARM__ ) - #if defined (__ARMVFP__) - #if defined (__FPU_PRESENT) && (__FPU_PRESENT == 1U) - #define __FPU_USED 1U - #else - #error "Compiler generates FPU instructions for a device without an FPU (check __FPU_PRESENT)" - #define __FPU_USED 0U - #endif - #else - #define __FPU_USED 0U - #endif - - #if defined (__ARM_FEATURE_DSP) && (__ARM_FEATURE_DSP == 1U) - #if defined (__DSP_PRESENT) && (__DSP_PRESENT == 1U) - #define __DSP_USED 1U - #else - #error "Compiler generates DSP (SIMD) instructions for a devices without DSP extensions (check __DSP_PRESENT)" - #define __DSP_USED 0U - #endif - #else - #define __DSP_USED 0U - #endif - -#elif defined ( __TI_ARM__ ) - #if defined (__TI_VFP_SUPPORT__) - #if defined (__FPU_PRESENT) && (__FPU_PRESENT == 1U) - #define __FPU_USED 1U - #else - #error "Compiler generates FPU instructions for a device without an FPU (check __FPU_PRESENT)" - #define __FPU_USED 0U - #endif - #else - #define __FPU_USED 0U - #endif - -#elif defined ( __TASKING__ ) - #if defined (__FPU_VFP__) - #if defined (__FPU_PRESENT) && (__FPU_PRESENT == 1U) - #define __FPU_USED 1U - #else - #error "Compiler generates FPU instructions for a device without an FPU (check __FPU_PRESENT)" - #define __FPU_USED 0U - #endif - #else - #define __FPU_USED 0U - #endif - -#elif defined ( __CSMC__ ) - #if ( __CSMC__ & 0x400U) - #if defined (__FPU_PRESENT) && (__FPU_PRESENT == 1U) - #define __FPU_USED 1U - #else - #error "Compiler generates FPU instructions for a device without an FPU (check __FPU_PRESENT)" - #define __FPU_USED 0U - #endif - #else - #define __FPU_USED 0U - #endif - -#endif - -#include "cmsis_compiler.h" /* CMSIS compiler specific defines */ - - -#ifdef __cplusplus -} -#endif - -#endif /* __CORE_CM33_H_GENERIC */ - -#ifndef __CMSIS_GENERIC - -#ifndef __CORE_CM33_H_DEPENDANT -#define __CORE_CM33_H_DEPENDANT - -#ifdef __cplusplus - extern "C" { -#endif - -/* check device defines and use defaults */ -#if defined __CHECK_DEVICE_DEFINES - #ifndef __CM33_REV - #define __CM33_REV 0x0000U - #warning "__CM33_REV not defined in device header file; using default!" - #endif - - #ifndef __FPU_PRESENT - #define __FPU_PRESENT 0U - #warning "__FPU_PRESENT not defined in device header file; using default!" - #endif - - #ifndef __MPU_PRESENT - #define __MPU_PRESENT 0U - #warning "__MPU_PRESENT not defined in device header file; using default!" - #endif - - #ifndef __SAUREGION_PRESENT - #define __SAUREGION_PRESENT 0U - #warning "__SAUREGION_PRESENT not defined in device header file; using default!" - #endif - - #ifndef __DSP_PRESENT - #define __DSP_PRESENT 0U - #warning "__DSP_PRESENT not defined in device header file; using default!" - #endif - - #ifndef __NVIC_PRIO_BITS - #define __NVIC_PRIO_BITS 3U - #warning "__NVIC_PRIO_BITS not defined in device header file; using default!" - #endif - - #ifndef __Vendor_SysTickConfig - #define __Vendor_SysTickConfig 0U - #warning "__Vendor_SysTickConfig not defined in device header file; using default!" - #endif -#endif - -/* IO definitions (access restrictions to peripheral registers) */ -/** - \defgroup CMSIS_glob_defs CMSIS Global Defines - - IO Type Qualifiers are used - \li to specify the access to peripheral variables. - \li for automatic generation of peripheral register debug information. -*/ -#ifdef __cplusplus - #define __I volatile /*!< Defines 'read only' permissions */ -#else - #define __I volatile const /*!< Defines 'read only' permissions */ -#endif -#define __O volatile /*!< Defines 'write only' permissions */ -#define __IO volatile /*!< Defines 'read / write' permissions */ - -/* following defines should be used for structure members */ -#define __IM volatile const /*! Defines 'read only' structure member permissions */ -#define __OM volatile /*! Defines 'write only' structure member permissions */ -#define __IOM volatile /*! Defines 'read / write' structure member permissions */ - -/*@} end of group Cortex_M33 */ - - - -/******************************************************************************* - * Register Abstraction - Core Register contain: - - Core Register - - Core NVIC Register - - Core SCB Register - - Core SysTick Register - - Core Debug Register - - Core MPU Register - - Core SAU Register - - Core FPU Register - ******************************************************************************/ -/** - \defgroup CMSIS_core_register Defines and Type Definitions - \brief Type definitions and defines for Cortex-M processor based devices. -*/ - -/** - \ingroup CMSIS_core_register - \defgroup CMSIS_CORE Status and Control Registers - \brief Core Register type definitions. - @{ - */ - -/** - \brief Union type to access the Application Program Status Register (APSR). - */ -typedef union -{ - struct - { - uint32_t _reserved0:16; /*!< bit: 0..15 Reserved */ - uint32_t GE:4; /*!< bit: 16..19 Greater than or Equal flags */ - uint32_t _reserved1:7; /*!< bit: 20..26 Reserved */ - uint32_t Q:1; /*!< bit: 27 Saturation condition flag */ - uint32_t V:1; /*!< bit: 28 Overflow condition code flag */ - uint32_t C:1; /*!< bit: 29 Carry condition code flag */ - uint32_t Z:1; /*!< bit: 30 Zero condition code flag */ - uint32_t N:1; /*!< bit: 31 Negative condition code flag */ - } b; /*!< Structure used for bit access */ - uint32_t w; /*!< Type used for word access */ -} APSR_Type; - -/* APSR Register Definitions */ -#define APSR_N_Pos 31U /*!< APSR: N Position */ -#define APSR_N_Msk (1UL << APSR_N_Pos) /*!< APSR: N Mask */ - -#define APSR_Z_Pos 30U /*!< APSR: Z Position */ -#define APSR_Z_Msk (1UL << APSR_Z_Pos) /*!< APSR: Z Mask */ - -#define APSR_C_Pos 29U /*!< APSR: C Position */ -#define APSR_C_Msk (1UL << APSR_C_Pos) /*!< APSR: C Mask */ - -#define APSR_V_Pos 28U /*!< APSR: V Position */ -#define APSR_V_Msk (1UL << APSR_V_Pos) /*!< APSR: V Mask */ - -#define APSR_Q_Pos 27U /*!< APSR: Q Position */ -#define APSR_Q_Msk (1UL << APSR_Q_Pos) /*!< APSR: Q Mask */ - -#define APSR_GE_Pos 16U /*!< APSR: GE Position */ -#define APSR_GE_Msk (0xFUL << APSR_GE_Pos) /*!< APSR: GE Mask */ - - -/** - \brief Union type to access the Interrupt Program Status Register (IPSR). - */ -typedef union -{ - struct - { - uint32_t ISR:9; /*!< bit: 0.. 8 Exception number */ - uint32_t _reserved0:23; /*!< bit: 9..31 Reserved */ - } b; /*!< Structure used for bit access */ - uint32_t w; /*!< Type used for word access */ -} IPSR_Type; - -/* IPSR Register Definitions */ -#define IPSR_ISR_Pos 0U /*!< IPSR: ISR Position */ -#define IPSR_ISR_Msk (0x1FFUL /*<< IPSR_ISR_Pos*/) /*!< IPSR: ISR Mask */ - - -/** - \brief Union type to access the Special-Purpose Program Status Registers (xPSR). - */ -typedef union -{ - struct - { - uint32_t ISR:9; /*!< bit: 0.. 8 Exception number */ - uint32_t _reserved0:7; /*!< bit: 9..15 Reserved */ - uint32_t GE:4; /*!< bit: 16..19 Greater than or Equal flags */ - uint32_t _reserved1:4; /*!< bit: 20..23 Reserved */ - uint32_t T:1; /*!< bit: 24 Thumb bit (read 0) */ - uint32_t IT:2; /*!< bit: 25..26 saved IT state (read 0) */ - uint32_t Q:1; /*!< bit: 27 Saturation condition flag */ - uint32_t V:1; /*!< bit: 28 Overflow condition code flag */ - uint32_t C:1; /*!< bit: 29 Carry condition code flag */ - uint32_t Z:1; /*!< bit: 30 Zero condition code flag */ - uint32_t N:1; /*!< bit: 31 Negative condition code flag */ - } b; /*!< Structure used for bit access */ - uint32_t w; /*!< Type used for word access */ -} xPSR_Type; - -/* xPSR Register Definitions */ -#define xPSR_N_Pos 31U /*!< xPSR: N Position */ -#define xPSR_N_Msk (1UL << xPSR_N_Pos) /*!< xPSR: N Mask */ - -#define xPSR_Z_Pos 30U /*!< xPSR: Z Position */ -#define xPSR_Z_Msk (1UL << xPSR_Z_Pos) /*!< xPSR: Z Mask */ - -#define xPSR_C_Pos 29U /*!< xPSR: C Position */ -#define xPSR_C_Msk (1UL << xPSR_C_Pos) /*!< xPSR: C Mask */ - -#define xPSR_V_Pos 28U /*!< xPSR: V Position */ -#define xPSR_V_Msk (1UL << xPSR_V_Pos) /*!< xPSR: V Mask */ - -#define xPSR_Q_Pos 27U /*!< xPSR: Q Position */ -#define xPSR_Q_Msk (1UL << xPSR_Q_Pos) /*!< xPSR: Q Mask */ - -#define xPSR_IT_Pos 25U /*!< xPSR: IT Position */ -#define xPSR_IT_Msk (3UL << xPSR_IT_Pos) /*!< xPSR: IT Mask */ - -#define xPSR_T_Pos 24U /*!< xPSR: T Position */ -#define xPSR_T_Msk (1UL << xPSR_T_Pos) /*!< xPSR: T Mask */ - -#define xPSR_GE_Pos 16U /*!< xPSR: GE Position */ -#define xPSR_GE_Msk (0xFUL << xPSR_GE_Pos) /*!< xPSR: GE Mask */ - -#define xPSR_ISR_Pos 0U /*!< xPSR: ISR Position */ -#define xPSR_ISR_Msk (0x1FFUL /*<< xPSR_ISR_Pos*/) /*!< xPSR: ISR Mask */ - - -/** - \brief Union type to access the Control Registers (CONTROL). - */ -typedef union -{ - struct - { - uint32_t nPRIV:1; /*!< bit: 0 Execution privilege in Thread mode */ - uint32_t SPSEL:1; /*!< bit: 1 Stack-pointer select */ - uint32_t FPCA:1; /*!< bit: 2 Floating-point context active */ - uint32_t SFPA:1; /*!< bit: 3 Secure floating-point active */ - uint32_t _reserved1:28; /*!< bit: 4..31 Reserved */ - } b; /*!< Structure used for bit access */ - uint32_t w; /*!< Type used for word access */ -} CONTROL_Type; - -/* CONTROL Register Definitions */ -#define CONTROL_SFPA_Pos 3U /*!< CONTROL: SFPA Position */ -#define CONTROL_SFPA_Msk (1UL << CONTROL_SFPA_Pos) /*!< CONTROL: SFPA Mask */ - -#define CONTROL_FPCA_Pos 2U /*!< CONTROL: FPCA Position */ -#define CONTROL_FPCA_Msk (1UL << CONTROL_FPCA_Pos) /*!< CONTROL: FPCA Mask */ - -#define CONTROL_SPSEL_Pos 1U /*!< CONTROL: SPSEL Position */ -#define CONTROL_SPSEL_Msk (1UL << CONTROL_SPSEL_Pos) /*!< CONTROL: SPSEL Mask */ - -#define CONTROL_nPRIV_Pos 0U /*!< CONTROL: nPRIV Position */ -#define CONTROL_nPRIV_Msk (1UL /*<< CONTROL_nPRIV_Pos*/) /*!< CONTROL: nPRIV Mask */ - -/*@} end of group CMSIS_CORE */ - - -/** - \ingroup CMSIS_core_register - \defgroup CMSIS_NVIC Nested Vectored Interrupt Controller (NVIC) - \brief Type definitions for the NVIC Registers - @{ - */ - -/** - \brief Structure type to access the Nested Vectored Interrupt Controller (NVIC). - */ -typedef struct -{ - __IOM uint32_t ISER[16U]; /*!< Offset: 0x000 (R/W) Interrupt Set Enable Register */ - uint32_t RESERVED0[16U]; - __IOM uint32_t ICER[16U]; /*!< Offset: 0x080 (R/W) Interrupt Clear Enable Register */ - uint32_t RSERVED1[16U]; - __IOM uint32_t ISPR[16U]; /*!< Offset: 0x100 (R/W) Interrupt Set Pending Register */ - uint32_t RESERVED2[16U]; - __IOM uint32_t ICPR[16U]; /*!< Offset: 0x180 (R/W) Interrupt Clear Pending Register */ - uint32_t RESERVED3[16U]; - __IOM uint32_t IABR[16U]; /*!< Offset: 0x200 (R/W) Interrupt Active bit Register */ - uint32_t RESERVED4[16U]; - __IOM uint32_t ITNS[16U]; /*!< Offset: 0x280 (R/W) Interrupt Non-Secure State Register */ - uint32_t RESERVED5[16U]; - __IOM uint8_t IPR[496U]; /*!< Offset: 0x300 (R/W) Interrupt Priority Register (8Bit wide) */ - uint32_t RESERVED6[580U]; - __OM uint32_t STIR; /*!< Offset: 0xE00 ( /W) Software Trigger Interrupt Register */ -} NVIC_Type; - -/* Software Triggered Interrupt Register Definitions */ -#define NVIC_STIR_INTID_Pos 0U /*!< STIR: INTLINESNUM Position */ -#define NVIC_STIR_INTID_Msk (0x1FFUL /*<< NVIC_STIR_INTID_Pos*/) /*!< STIR: INTLINESNUM Mask */ - -/*@} end of group CMSIS_NVIC */ - - -/** - \ingroup CMSIS_core_register - \defgroup CMSIS_SCB System Control Block (SCB) - \brief Type definitions for the System Control Block Registers - @{ - */ - -/** - \brief Structure type to access the System Control Block (SCB). - */ -typedef struct -{ - __IM uint32_t CPUID; /*!< Offset: 0x000 (R/ ) CPUID Base Register */ - __IOM uint32_t ICSR; /*!< Offset: 0x004 (R/W) Interrupt Control and State Register */ - __IOM uint32_t VTOR; /*!< Offset: 0x008 (R/W) Vector Table Offset Register */ - __IOM uint32_t AIRCR; /*!< Offset: 0x00C (R/W) Application Interrupt and Reset Control Register */ - __IOM uint32_t SCR; /*!< Offset: 0x010 (R/W) System Control Register */ - __IOM uint32_t CCR; /*!< Offset: 0x014 (R/W) Configuration Control Register */ - __IOM uint8_t SHPR[12U]; /*!< Offset: 0x018 (R/W) System Handlers Priority Registers (4-7, 8-11, 12-15) */ - __IOM uint32_t SHCSR; /*!< Offset: 0x024 (R/W) System Handler Control and State Register */ - __IOM uint32_t CFSR; /*!< Offset: 0x028 (R/W) Configurable Fault Status Register */ - __IOM uint32_t HFSR; /*!< Offset: 0x02C (R/W) HardFault Status Register */ - __IOM uint32_t DFSR; /*!< Offset: 0x030 (R/W) Debug Fault Status Register */ - __IOM uint32_t MMFAR; /*!< Offset: 0x034 (R/W) MemManage Fault Address Register */ - __IOM uint32_t BFAR; /*!< Offset: 0x038 (R/W) BusFault Address Register */ - __IOM uint32_t AFSR; /*!< Offset: 0x03C (R/W) Auxiliary Fault Status Register */ - __IM uint32_t ID_PFR[2U]; /*!< Offset: 0x040 (R/ ) Processor Feature Register */ - __IM uint32_t ID_DFR; /*!< Offset: 0x048 (R/ ) Debug Feature Register */ - __IM uint32_t ID_ADR; /*!< Offset: 0x04C (R/ ) Auxiliary Feature Register */ - __IM uint32_t ID_MMFR[4U]; /*!< Offset: 0x050 (R/ ) Memory Model Feature Register */ - __IM uint32_t ID_ISAR[6U]; /*!< Offset: 0x060 (R/ ) Instruction Set Attributes Register */ - __IM uint32_t CLIDR; /*!< Offset: 0x078 (R/ ) Cache Level ID register */ - __IM uint32_t CTR; /*!< Offset: 0x07C (R/ ) Cache Type register */ - __IM uint32_t CCSIDR; /*!< Offset: 0x080 (R/ ) Cache Size ID Register */ - __IOM uint32_t CSSELR; /*!< Offset: 0x084 (R/W) Cache Size Selection Register */ - __IOM uint32_t CPACR; /*!< Offset: 0x088 (R/W) Coprocessor Access Control Register */ - __IOM uint32_t NSACR; /*!< Offset: 0x08C (R/W) Non-Secure Access Control Register */ - uint32_t RESERVED3[92U]; - __OM uint32_t STIR; /*!< Offset: 0x200 ( /W) Software Triggered Interrupt Register */ - uint32_t RESERVED4[15U]; - __IM uint32_t MVFR0; /*!< Offset: 0x240 (R/ ) Media and VFP Feature Register 0 */ - __IM uint32_t MVFR1; /*!< Offset: 0x244 (R/ ) Media and VFP Feature Register 1 */ - __IM uint32_t MVFR2; /*!< Offset: 0x248 (R/ ) Media and VFP Feature Register 2 */ - uint32_t RESERVED5[1U]; - __OM uint32_t ICIALLU; /*!< Offset: 0x250 ( /W) I-Cache Invalidate All to PoU */ - uint32_t RESERVED6[1U]; - __OM uint32_t ICIMVAU; /*!< Offset: 0x258 ( /W) I-Cache Invalidate by MVA to PoU */ - __OM uint32_t DCIMVAC; /*!< Offset: 0x25C ( /W) D-Cache Invalidate by MVA to PoC */ - __OM uint32_t DCISW; /*!< Offset: 0x260 ( /W) D-Cache Invalidate by Set-way */ - __OM uint32_t DCCMVAU; /*!< Offset: 0x264 ( /W) D-Cache Clean by MVA to PoU */ - __OM uint32_t DCCMVAC; /*!< Offset: 0x268 ( /W) D-Cache Clean by MVA to PoC */ - __OM uint32_t DCCSW; /*!< Offset: 0x26C ( /W) D-Cache Clean by Set-way */ - __OM uint32_t DCCIMVAC; /*!< Offset: 0x270 ( /W) D-Cache Clean and Invalidate by MVA to PoC */ - __OM uint32_t DCCISW; /*!< Offset: 0x274 ( /W) D-Cache Clean and Invalidate by Set-way */ - uint32_t RESERVED7[6U]; - __IOM uint32_t ITCMCR; /*!< Offset: 0x290 (R/W) Instruction Tightly-Coupled Memory Control Register */ - __IOM uint32_t DTCMCR; /*!< Offset: 0x294 (R/W) Data Tightly-Coupled Memory Control Registers */ - __IOM uint32_t AHBPCR; /*!< Offset: 0x298 (R/W) AHBP Control Register */ - __IOM uint32_t CACR; /*!< Offset: 0x29C (R/W) L1 Cache Control Register */ - __IOM uint32_t AHBSCR; /*!< Offset: 0x2A0 (R/W) AHB Slave Control Register */ - uint32_t RESERVED8[1U]; - __IOM uint32_t ABFSR; /*!< Offset: 0x2A8 (R/W) Auxiliary Bus Fault Status Register */ -} SCB_Type; - -/* SCB CPUID Register Definitions */ -#define SCB_CPUID_IMPLEMENTER_Pos 24U /*!< SCB CPUID: IMPLEMENTER Position */ -#define SCB_CPUID_IMPLEMENTER_Msk (0xFFUL << SCB_CPUID_IMPLEMENTER_Pos) /*!< SCB CPUID: IMPLEMENTER Mask */ - -#define SCB_CPUID_VARIANT_Pos 20U /*!< SCB CPUID: VARIANT Position */ -#define SCB_CPUID_VARIANT_Msk (0xFUL << SCB_CPUID_VARIANT_Pos) /*!< SCB CPUID: VARIANT Mask */ - -#define SCB_CPUID_ARCHITECTURE_Pos 16U /*!< SCB CPUID: ARCHITECTURE Position */ -#define SCB_CPUID_ARCHITECTURE_Msk (0xFUL << SCB_CPUID_ARCHITECTURE_Pos) /*!< SCB CPUID: ARCHITECTURE Mask */ - -#define SCB_CPUID_PARTNO_Pos 4U /*!< SCB CPUID: PARTNO Position */ -#define SCB_CPUID_PARTNO_Msk (0xFFFUL << SCB_CPUID_PARTNO_Pos) /*!< SCB CPUID: PARTNO Mask */ - -#define SCB_CPUID_REVISION_Pos 0U /*!< SCB CPUID: REVISION Position */ -#define SCB_CPUID_REVISION_Msk (0xFUL /*<< SCB_CPUID_REVISION_Pos*/) /*!< SCB CPUID: REVISION Mask */ - -/* SCB Interrupt Control State Register Definitions */ -#define SCB_ICSR_PENDNMISET_Pos 31U /*!< SCB ICSR: PENDNMISET Position */ -#define SCB_ICSR_PENDNMISET_Msk (1UL << SCB_ICSR_PENDNMISET_Pos) /*!< SCB ICSR: PENDNMISET Mask */ - -#define SCB_ICSR_NMIPENDSET_Pos SCB_ICSR_PENDNMISET_Pos /*!< SCB ICSR: NMIPENDSET Position, backward compatibility */ -#define SCB_ICSR_NMIPENDSET_Msk SCB_ICSR_PENDNMISET_Msk /*!< SCB ICSR: NMIPENDSET Mask, backward compatibility */ - -#define SCB_ICSR_PENDNMICLR_Pos 30U /*!< SCB ICSR: PENDNMICLR Position */ -#define SCB_ICSR_PENDNMICLR_Msk (1UL << SCB_ICSR_PENDNMICLR_Pos) /*!< SCB ICSR: PENDNMICLR Mask */ - -#define SCB_ICSR_PENDSVSET_Pos 28U /*!< SCB ICSR: PENDSVSET Position */ -#define SCB_ICSR_PENDSVSET_Msk (1UL << SCB_ICSR_PENDSVSET_Pos) /*!< SCB ICSR: PENDSVSET Mask */ - -#define SCB_ICSR_PENDSVCLR_Pos 27U /*!< SCB ICSR: PENDSVCLR Position */ -#define SCB_ICSR_PENDSVCLR_Msk (1UL << SCB_ICSR_PENDSVCLR_Pos) /*!< SCB ICSR: PENDSVCLR Mask */ - -#define SCB_ICSR_PENDSTSET_Pos 26U /*!< SCB ICSR: PENDSTSET Position */ -#define SCB_ICSR_PENDSTSET_Msk (1UL << SCB_ICSR_PENDSTSET_Pos) /*!< SCB ICSR: PENDSTSET Mask */ - -#define SCB_ICSR_PENDSTCLR_Pos 25U /*!< SCB ICSR: PENDSTCLR Position */ -#define SCB_ICSR_PENDSTCLR_Msk (1UL << SCB_ICSR_PENDSTCLR_Pos) /*!< SCB ICSR: PENDSTCLR Mask */ - -#define SCB_ICSR_STTNS_Pos 24U /*!< SCB ICSR: STTNS Position (Security Extension) */ -#define SCB_ICSR_STTNS_Msk (1UL << SCB_ICSR_STTNS_Pos) /*!< SCB ICSR: STTNS Mask (Security Extension) */ - -#define SCB_ICSR_ISRPREEMPT_Pos 23U /*!< SCB ICSR: ISRPREEMPT Position */ -#define SCB_ICSR_ISRPREEMPT_Msk (1UL << SCB_ICSR_ISRPREEMPT_Pos) /*!< SCB ICSR: ISRPREEMPT Mask */ - -#define SCB_ICSR_ISRPENDING_Pos 22U /*!< SCB ICSR: ISRPENDING Position */ -#define SCB_ICSR_ISRPENDING_Msk (1UL << SCB_ICSR_ISRPENDING_Pos) /*!< SCB ICSR: ISRPENDING Mask */ - -#define SCB_ICSR_VECTPENDING_Pos 12U /*!< SCB ICSR: VECTPENDING Position */ -#define SCB_ICSR_VECTPENDING_Msk (0x1FFUL << SCB_ICSR_VECTPENDING_Pos) /*!< SCB ICSR: VECTPENDING Mask */ - -#define SCB_ICSR_RETTOBASE_Pos 11U /*!< SCB ICSR: RETTOBASE Position */ -#define SCB_ICSR_RETTOBASE_Msk (1UL << SCB_ICSR_RETTOBASE_Pos) /*!< SCB ICSR: RETTOBASE Mask */ - -#define SCB_ICSR_VECTACTIVE_Pos 0U /*!< SCB ICSR: VECTACTIVE Position */ -#define SCB_ICSR_VECTACTIVE_Msk (0x1FFUL /*<< SCB_ICSR_VECTACTIVE_Pos*/) /*!< SCB ICSR: VECTACTIVE Mask */ - -/* SCB Vector Table Offset Register Definitions */ -#define SCB_VTOR_TBLOFF_Pos 7U /*!< SCB VTOR: TBLOFF Position */ -#define SCB_VTOR_TBLOFF_Msk (0x1FFFFFFUL << SCB_VTOR_TBLOFF_Pos) /*!< SCB VTOR: TBLOFF Mask */ - -/* SCB Application Interrupt and Reset Control Register Definitions */ -#define SCB_AIRCR_VECTKEY_Pos 16U /*!< SCB AIRCR: VECTKEY Position */ -#define SCB_AIRCR_VECTKEY_Msk (0xFFFFUL << SCB_AIRCR_VECTKEY_Pos) /*!< SCB AIRCR: VECTKEY Mask */ - -#define SCB_AIRCR_VECTKEYSTAT_Pos 16U /*!< SCB AIRCR: VECTKEYSTAT Position */ -#define SCB_AIRCR_VECTKEYSTAT_Msk (0xFFFFUL << SCB_AIRCR_VECTKEYSTAT_Pos) /*!< SCB AIRCR: VECTKEYSTAT Mask */ - -#define SCB_AIRCR_ENDIANESS_Pos 15U /*!< SCB AIRCR: ENDIANESS Position */ -#define SCB_AIRCR_ENDIANESS_Msk (1UL << SCB_AIRCR_ENDIANESS_Pos) /*!< SCB AIRCR: ENDIANESS Mask */ - -#define SCB_AIRCR_PRIS_Pos 14U /*!< SCB AIRCR: PRIS Position */ -#define SCB_AIRCR_PRIS_Msk (1UL << SCB_AIRCR_PRIS_Pos) /*!< SCB AIRCR: PRIS Mask */ - -#define SCB_AIRCR_BFHFNMINS_Pos 13U /*!< SCB AIRCR: BFHFNMINS Position */ -#define SCB_AIRCR_BFHFNMINS_Msk (1UL << SCB_AIRCR_BFHFNMINS_Pos) /*!< SCB AIRCR: BFHFNMINS Mask */ - -#define SCB_AIRCR_PRIGROUP_Pos 8U /*!< SCB AIRCR: PRIGROUP Position */ -#define SCB_AIRCR_PRIGROUP_Msk (7UL << SCB_AIRCR_PRIGROUP_Pos) /*!< SCB AIRCR: PRIGROUP Mask */ - -#define SCB_AIRCR_SYSRESETREQS_Pos 3U /*!< SCB AIRCR: SYSRESETREQS Position */ -#define SCB_AIRCR_SYSRESETREQS_Msk (1UL << SCB_AIRCR_SYSRESETREQS_Pos) /*!< SCB AIRCR: SYSRESETREQS Mask */ - -#define SCB_AIRCR_SYSRESETREQ_Pos 2U /*!< SCB AIRCR: SYSRESETREQ Position */ -#define SCB_AIRCR_SYSRESETREQ_Msk (1UL << SCB_AIRCR_SYSRESETREQ_Pos) /*!< SCB AIRCR: SYSRESETREQ Mask */ - -#define SCB_AIRCR_VECTCLRACTIVE_Pos 1U /*!< SCB AIRCR: VECTCLRACTIVE Position */ -#define SCB_AIRCR_VECTCLRACTIVE_Msk (1UL << SCB_AIRCR_VECTCLRACTIVE_Pos) /*!< SCB AIRCR: VECTCLRACTIVE Mask */ - -/* SCB System Control Register Definitions */ -#define SCB_SCR_SEVONPEND_Pos 4U /*!< SCB SCR: SEVONPEND Position */ -#define SCB_SCR_SEVONPEND_Msk (1UL << SCB_SCR_SEVONPEND_Pos) /*!< SCB SCR: SEVONPEND Mask */ - -#define SCB_SCR_SLEEPDEEPS_Pos 3U /*!< SCB SCR: SLEEPDEEPS Position */ -#define SCB_SCR_SLEEPDEEPS_Msk (1UL << SCB_SCR_SLEEPDEEPS_Pos) /*!< SCB SCR: SLEEPDEEPS Mask */ - -#define SCB_SCR_SLEEPDEEP_Pos 2U /*!< SCB SCR: SLEEPDEEP Position */ -#define SCB_SCR_SLEEPDEEP_Msk (1UL << SCB_SCR_SLEEPDEEP_Pos) /*!< SCB SCR: SLEEPDEEP Mask */ - -#define SCB_SCR_SLEEPONEXIT_Pos 1U /*!< SCB SCR: SLEEPONEXIT Position */ -#define SCB_SCR_SLEEPONEXIT_Msk (1UL << SCB_SCR_SLEEPONEXIT_Pos) /*!< SCB SCR: SLEEPONEXIT Mask */ - -/* SCB Configuration Control Register Definitions */ -#define SCB_CCR_BP_Pos 18U /*!< SCB CCR: BP Position */ -#define SCB_CCR_BP_Msk (1UL << SCB_CCR_BP_Pos) /*!< SCB CCR: BP Mask */ - -#define SCB_CCR_IC_Pos 17U /*!< SCB CCR: IC Position */ -#define SCB_CCR_IC_Msk (1UL << SCB_CCR_IC_Pos) /*!< SCB CCR: IC Mask */ - -#define SCB_CCR_DC_Pos 16U /*!< SCB CCR: DC Position */ -#define SCB_CCR_DC_Msk (1UL << SCB_CCR_DC_Pos) /*!< SCB CCR: DC Mask */ - -#define SCB_CCR_STKOFHFNMIGN_Pos 10U /*!< SCB CCR: STKOFHFNMIGN Position */ -#define SCB_CCR_STKOFHFNMIGN_Msk (1UL << SCB_CCR_STKOFHFNMIGN_Pos) /*!< SCB CCR: STKOFHFNMIGN Mask */ - -#define SCB_CCR_BFHFNMIGN_Pos 8U /*!< SCB CCR: BFHFNMIGN Position */ -#define SCB_CCR_BFHFNMIGN_Msk (1UL << SCB_CCR_BFHFNMIGN_Pos) /*!< SCB CCR: BFHFNMIGN Mask */ - -#define SCB_CCR_DIV_0_TRP_Pos 4U /*!< SCB CCR: DIV_0_TRP Position */ -#define SCB_CCR_DIV_0_TRP_Msk (1UL << SCB_CCR_DIV_0_TRP_Pos) /*!< SCB CCR: DIV_0_TRP Mask */ - -#define SCB_CCR_UNALIGN_TRP_Pos 3U /*!< SCB CCR: UNALIGN_TRP Position */ -#define SCB_CCR_UNALIGN_TRP_Msk (1UL << SCB_CCR_UNALIGN_TRP_Pos) /*!< SCB CCR: UNALIGN_TRP Mask */ - -#define SCB_CCR_USERSETMPEND_Pos 1U /*!< SCB CCR: USERSETMPEND Position */ -#define SCB_CCR_USERSETMPEND_Msk (1UL << SCB_CCR_USERSETMPEND_Pos) /*!< SCB CCR: USERSETMPEND Mask */ - -/* SCB System Handler Control and State Register Definitions */ -#define SCB_SHCSR_HARDFAULTPENDED_Pos 21U /*!< SCB SHCSR: HARDFAULTPENDED Position */ -#define SCB_SHCSR_HARDFAULTPENDED_Msk (1UL << SCB_SHCSR_HARDFAULTPENDED_Pos) /*!< SCB SHCSR: HARDFAULTPENDED Mask */ - -#define SCB_SHCSR_SECUREFAULTPENDED_Pos 20U /*!< SCB SHCSR: SECUREFAULTPENDED Position */ -#define SCB_SHCSR_SECUREFAULTPENDED_Msk (1UL << SCB_SHCSR_SECUREFAULTPENDED_Pos) /*!< SCB SHCSR: SECUREFAULTPENDED Mask */ - -#define SCB_SHCSR_SECUREFAULTENA_Pos 19U /*!< SCB SHCSR: SECUREFAULTENA Position */ -#define SCB_SHCSR_SECUREFAULTENA_Msk (1UL << SCB_SHCSR_SECUREFAULTENA_Pos) /*!< SCB SHCSR: SECUREFAULTENA Mask */ - -#define SCB_SHCSR_USGFAULTENA_Pos 18U /*!< SCB SHCSR: USGFAULTENA Position */ -#define SCB_SHCSR_USGFAULTENA_Msk (1UL << SCB_SHCSR_USGFAULTENA_Pos) /*!< SCB SHCSR: USGFAULTENA Mask */ - -#define SCB_SHCSR_BUSFAULTENA_Pos 17U /*!< SCB SHCSR: BUSFAULTENA Position */ -#define SCB_SHCSR_BUSFAULTENA_Msk (1UL << SCB_SHCSR_BUSFAULTENA_Pos) /*!< SCB SHCSR: BUSFAULTENA Mask */ - -#define SCB_SHCSR_MEMFAULTENA_Pos 16U /*!< SCB SHCSR: MEMFAULTENA Position */ -#define SCB_SHCSR_MEMFAULTENA_Msk (1UL << SCB_SHCSR_MEMFAULTENA_Pos) /*!< SCB SHCSR: MEMFAULTENA Mask */ - -#define SCB_SHCSR_SVCALLPENDED_Pos 15U /*!< SCB SHCSR: SVCALLPENDED Position */ -#define SCB_SHCSR_SVCALLPENDED_Msk (1UL << SCB_SHCSR_SVCALLPENDED_Pos) /*!< SCB SHCSR: SVCALLPENDED Mask */ - -#define SCB_SHCSR_BUSFAULTPENDED_Pos 14U /*!< SCB SHCSR: BUSFAULTPENDED Position */ -#define SCB_SHCSR_BUSFAULTPENDED_Msk (1UL << SCB_SHCSR_BUSFAULTPENDED_Pos) /*!< SCB SHCSR: BUSFAULTPENDED Mask */ - -#define SCB_SHCSR_MEMFAULTPENDED_Pos 13U /*!< SCB SHCSR: MEMFAULTPENDED Position */ -#define SCB_SHCSR_MEMFAULTPENDED_Msk (1UL << SCB_SHCSR_MEMFAULTPENDED_Pos) /*!< SCB SHCSR: MEMFAULTPENDED Mask */ - -#define SCB_SHCSR_USGFAULTPENDED_Pos 12U /*!< SCB SHCSR: USGFAULTPENDED Position */ -#define SCB_SHCSR_USGFAULTPENDED_Msk (1UL << SCB_SHCSR_USGFAULTPENDED_Pos) /*!< SCB SHCSR: USGFAULTPENDED Mask */ - -#define SCB_SHCSR_SYSTICKACT_Pos 11U /*!< SCB SHCSR: SYSTICKACT Position */ -#define SCB_SHCSR_SYSTICKACT_Msk (1UL << SCB_SHCSR_SYSTICKACT_Pos) /*!< SCB SHCSR: SYSTICKACT Mask */ - -#define SCB_SHCSR_PENDSVACT_Pos 10U /*!< SCB SHCSR: PENDSVACT Position */ -#define SCB_SHCSR_PENDSVACT_Msk (1UL << SCB_SHCSR_PENDSVACT_Pos) /*!< SCB SHCSR: PENDSVACT Mask */ - -#define SCB_SHCSR_MONITORACT_Pos 8U /*!< SCB SHCSR: MONITORACT Position */ -#define SCB_SHCSR_MONITORACT_Msk (1UL << SCB_SHCSR_MONITORACT_Pos) /*!< SCB SHCSR: MONITORACT Mask */ - -#define SCB_SHCSR_SVCALLACT_Pos 7U /*!< SCB SHCSR: SVCALLACT Position */ -#define SCB_SHCSR_SVCALLACT_Msk (1UL << SCB_SHCSR_SVCALLACT_Pos) /*!< SCB SHCSR: SVCALLACT Mask */ - -#define SCB_SHCSR_NMIACT_Pos 5U /*!< SCB SHCSR: NMIACT Position */ -#define SCB_SHCSR_NMIACT_Msk (1UL << SCB_SHCSR_NMIACT_Pos) /*!< SCB SHCSR: NMIACT Mask */ - -#define SCB_SHCSR_SECUREFAULTACT_Pos 4U /*!< SCB SHCSR: SECUREFAULTACT Position */ -#define SCB_SHCSR_SECUREFAULTACT_Msk (1UL << SCB_SHCSR_SECUREFAULTACT_Pos) /*!< SCB SHCSR: SECUREFAULTACT Mask */ - -#define SCB_SHCSR_USGFAULTACT_Pos 3U /*!< SCB SHCSR: USGFAULTACT Position */ -#define SCB_SHCSR_USGFAULTACT_Msk (1UL << SCB_SHCSR_USGFAULTACT_Pos) /*!< SCB SHCSR: USGFAULTACT Mask */ - -#define SCB_SHCSR_HARDFAULTACT_Pos 2U /*!< SCB SHCSR: HARDFAULTACT Position */ -#define SCB_SHCSR_HARDFAULTACT_Msk (1UL << SCB_SHCSR_HARDFAULTACT_Pos) /*!< SCB SHCSR: HARDFAULTACT Mask */ - -#define SCB_SHCSR_BUSFAULTACT_Pos 1U /*!< SCB SHCSR: BUSFAULTACT Position */ -#define SCB_SHCSR_BUSFAULTACT_Msk (1UL << SCB_SHCSR_BUSFAULTACT_Pos) /*!< SCB SHCSR: BUSFAULTACT Mask */ - -#define SCB_SHCSR_MEMFAULTACT_Pos 0U /*!< SCB SHCSR: MEMFAULTACT Position */ -#define SCB_SHCSR_MEMFAULTACT_Msk (1UL /*<< SCB_SHCSR_MEMFAULTACT_Pos*/) /*!< SCB SHCSR: MEMFAULTACT Mask */ - -/* SCB Configurable Fault Status Register Definitions */ -#define SCB_CFSR_USGFAULTSR_Pos 16U /*!< SCB CFSR: Usage Fault Status Register Position */ -#define SCB_CFSR_USGFAULTSR_Msk (0xFFFFUL << SCB_CFSR_USGFAULTSR_Pos) /*!< SCB CFSR: Usage Fault Status Register Mask */ - -#define SCB_CFSR_BUSFAULTSR_Pos 8U /*!< SCB CFSR: Bus Fault Status Register Position */ -#define SCB_CFSR_BUSFAULTSR_Msk (0xFFUL << SCB_CFSR_BUSFAULTSR_Pos) /*!< SCB CFSR: Bus Fault Status Register Mask */ - -#define SCB_CFSR_MEMFAULTSR_Pos 0U /*!< SCB CFSR: Memory Manage Fault Status Register Position */ -#define SCB_CFSR_MEMFAULTSR_Msk (0xFFUL /*<< SCB_CFSR_MEMFAULTSR_Pos*/) /*!< SCB CFSR: Memory Manage Fault Status Register Mask */ - -/* MemManage Fault Status Register (part of SCB Configurable Fault Status Register) */ -#define SCB_CFSR_MMARVALID_Pos (SCB_SHCSR_MEMFAULTACT_Pos + 7U) /*!< SCB CFSR (MMFSR): MMARVALID Position */ -#define SCB_CFSR_MMARVALID_Msk (1UL << SCB_CFSR_MMARVALID_Pos) /*!< SCB CFSR (MMFSR): MMARVALID Mask */ - -#define SCB_CFSR_MLSPERR_Pos (SCB_SHCSR_MEMFAULTACT_Pos + 5U) /*!< SCB CFSR (MMFSR): MLSPERR Position */ -#define SCB_CFSR_MLSPERR_Msk (1UL << SCB_CFSR_MLSPERR_Pos) /*!< SCB CFSR (MMFSR): MLSPERR Mask */ - -#define SCB_CFSR_MSTKERR_Pos (SCB_SHCSR_MEMFAULTACT_Pos + 4U) /*!< SCB CFSR (MMFSR): MSTKERR Position */ -#define SCB_CFSR_MSTKERR_Msk (1UL << SCB_CFSR_MSTKERR_Pos) /*!< SCB CFSR (MMFSR): MSTKERR Mask */ - -#define SCB_CFSR_MUNSTKERR_Pos (SCB_SHCSR_MEMFAULTACT_Pos + 3U) /*!< SCB CFSR (MMFSR): MUNSTKERR Position */ -#define SCB_CFSR_MUNSTKERR_Msk (1UL << SCB_CFSR_MUNSTKERR_Pos) /*!< SCB CFSR (MMFSR): MUNSTKERR Mask */ - -#define SCB_CFSR_DACCVIOL_Pos (SCB_SHCSR_MEMFAULTACT_Pos + 1U) /*!< SCB CFSR (MMFSR): DACCVIOL Position */ -#define SCB_CFSR_DACCVIOL_Msk (1UL << SCB_CFSR_DACCVIOL_Pos) /*!< SCB CFSR (MMFSR): DACCVIOL Mask */ - -#define SCB_CFSR_IACCVIOL_Pos (SCB_SHCSR_MEMFAULTACT_Pos + 0U) /*!< SCB CFSR (MMFSR): IACCVIOL Position */ -#define SCB_CFSR_IACCVIOL_Msk (1UL /*<< SCB_CFSR_IACCVIOL_Pos*/) /*!< SCB CFSR (MMFSR): IACCVIOL Mask */ - -/* BusFault Status Register (part of SCB Configurable Fault Status Register) */ -#define SCB_CFSR_BFARVALID_Pos (SCB_CFSR_BUSFAULTSR_Pos + 7U) /*!< SCB CFSR (BFSR): BFARVALID Position */ -#define SCB_CFSR_BFARVALID_Msk (1UL << SCB_CFSR_BFARVALID_Pos) /*!< SCB CFSR (BFSR): BFARVALID Mask */ - -#define SCB_CFSR_LSPERR_Pos (SCB_CFSR_BUSFAULTSR_Pos + 5U) /*!< SCB CFSR (BFSR): LSPERR Position */ -#define SCB_CFSR_LSPERR_Msk (1UL << SCB_CFSR_LSPERR_Pos) /*!< SCB CFSR (BFSR): LSPERR Mask */ - -#define SCB_CFSR_STKERR_Pos (SCB_CFSR_BUSFAULTSR_Pos + 4U) /*!< SCB CFSR (BFSR): STKERR Position */ -#define SCB_CFSR_STKERR_Msk (1UL << SCB_CFSR_STKERR_Pos) /*!< SCB CFSR (BFSR): STKERR Mask */ - -#define SCB_CFSR_UNSTKERR_Pos (SCB_CFSR_BUSFAULTSR_Pos + 3U) /*!< SCB CFSR (BFSR): UNSTKERR Position */ -#define SCB_CFSR_UNSTKERR_Msk (1UL << SCB_CFSR_UNSTKERR_Pos) /*!< SCB CFSR (BFSR): UNSTKERR Mask */ - -#define SCB_CFSR_IMPRECISERR_Pos (SCB_CFSR_BUSFAULTSR_Pos + 2U) /*!< SCB CFSR (BFSR): IMPRECISERR Position */ -#define SCB_CFSR_IMPRECISERR_Msk (1UL << SCB_CFSR_IMPRECISERR_Pos) /*!< SCB CFSR (BFSR): IMPRECISERR Mask */ - -#define SCB_CFSR_PRECISERR_Pos (SCB_CFSR_BUSFAULTSR_Pos + 1U) /*!< SCB CFSR (BFSR): PRECISERR Position */ -#define SCB_CFSR_PRECISERR_Msk (1UL << SCB_CFSR_PRECISERR_Pos) /*!< SCB CFSR (BFSR): PRECISERR Mask */ - -#define SCB_CFSR_IBUSERR_Pos (SCB_CFSR_BUSFAULTSR_Pos + 0U) /*!< SCB CFSR (BFSR): IBUSERR Position */ -#define SCB_CFSR_IBUSERR_Msk (1UL << SCB_CFSR_IBUSERR_Pos) /*!< SCB CFSR (BFSR): IBUSERR Mask */ - -/* UsageFault Status Register (part of SCB Configurable Fault Status Register) */ -#define SCB_CFSR_DIVBYZERO_Pos (SCB_CFSR_USGFAULTSR_Pos + 9U) /*!< SCB CFSR (UFSR): DIVBYZERO Position */ -#define SCB_CFSR_DIVBYZERO_Msk (1UL << SCB_CFSR_DIVBYZERO_Pos) /*!< SCB CFSR (UFSR): DIVBYZERO Mask */ - -#define SCB_CFSR_UNALIGNED_Pos (SCB_CFSR_USGFAULTSR_Pos + 8U) /*!< SCB CFSR (UFSR): UNALIGNED Position */ -#define SCB_CFSR_UNALIGNED_Msk (1UL << SCB_CFSR_UNALIGNED_Pos) /*!< SCB CFSR (UFSR): UNALIGNED Mask */ - -#define SCB_CFSR_STKOF_Pos (SCB_CFSR_USGFAULTSR_Pos + 4U) /*!< SCB CFSR (UFSR): STKOF Position */ -#define SCB_CFSR_STKOF_Msk (1UL << SCB_CFSR_STKOF_Pos) /*!< SCB CFSR (UFSR): STKOF Mask */ - -#define SCB_CFSR_NOCP_Pos (SCB_CFSR_USGFAULTSR_Pos + 3U) /*!< SCB CFSR (UFSR): NOCP Position */ -#define SCB_CFSR_NOCP_Msk (1UL << SCB_CFSR_NOCP_Pos) /*!< SCB CFSR (UFSR): NOCP Mask */ - -#define SCB_CFSR_INVPC_Pos (SCB_CFSR_USGFAULTSR_Pos + 2U) /*!< SCB CFSR (UFSR): INVPC Position */ -#define SCB_CFSR_INVPC_Msk (1UL << SCB_CFSR_INVPC_Pos) /*!< SCB CFSR (UFSR): INVPC Mask */ - -#define SCB_CFSR_INVSTATE_Pos (SCB_CFSR_USGFAULTSR_Pos + 1U) /*!< SCB CFSR (UFSR): INVSTATE Position */ -#define SCB_CFSR_INVSTATE_Msk (1UL << SCB_CFSR_INVSTATE_Pos) /*!< SCB CFSR (UFSR): INVSTATE Mask */ - -#define SCB_CFSR_UNDEFINSTR_Pos (SCB_CFSR_USGFAULTSR_Pos + 0U) /*!< SCB CFSR (UFSR): UNDEFINSTR Position */ -#define SCB_CFSR_UNDEFINSTR_Msk (1UL << SCB_CFSR_UNDEFINSTR_Pos) /*!< SCB CFSR (UFSR): UNDEFINSTR Mask */ - -/* SCB Hard Fault Status Register Definitions */ -#define SCB_HFSR_DEBUGEVT_Pos 31U /*!< SCB HFSR: DEBUGEVT Position */ -#define SCB_HFSR_DEBUGEVT_Msk (1UL << SCB_HFSR_DEBUGEVT_Pos) /*!< SCB HFSR: DEBUGEVT Mask */ - -#define SCB_HFSR_FORCED_Pos 30U /*!< SCB HFSR: FORCED Position */ -#define SCB_HFSR_FORCED_Msk (1UL << SCB_HFSR_FORCED_Pos) /*!< SCB HFSR: FORCED Mask */ - -#define SCB_HFSR_VECTTBL_Pos 1U /*!< SCB HFSR: VECTTBL Position */ -#define SCB_HFSR_VECTTBL_Msk (1UL << SCB_HFSR_VECTTBL_Pos) /*!< SCB HFSR: VECTTBL Mask */ - -/* SCB Debug Fault Status Register Definitions */ -#define SCB_DFSR_EXTERNAL_Pos 4U /*!< SCB DFSR: EXTERNAL Position */ -#define SCB_DFSR_EXTERNAL_Msk (1UL << SCB_DFSR_EXTERNAL_Pos) /*!< SCB DFSR: EXTERNAL Mask */ - -#define SCB_DFSR_VCATCH_Pos 3U /*!< SCB DFSR: VCATCH Position */ -#define SCB_DFSR_VCATCH_Msk (1UL << SCB_DFSR_VCATCH_Pos) /*!< SCB DFSR: VCATCH Mask */ - -#define SCB_DFSR_DWTTRAP_Pos 2U /*!< SCB DFSR: DWTTRAP Position */ -#define SCB_DFSR_DWTTRAP_Msk (1UL << SCB_DFSR_DWTTRAP_Pos) /*!< SCB DFSR: DWTTRAP Mask */ - -#define SCB_DFSR_BKPT_Pos 1U /*!< SCB DFSR: BKPT Position */ -#define SCB_DFSR_BKPT_Msk (1UL << SCB_DFSR_BKPT_Pos) /*!< SCB DFSR: BKPT Mask */ - -#define SCB_DFSR_HALTED_Pos 0U /*!< SCB DFSR: HALTED Position */ -#define SCB_DFSR_HALTED_Msk (1UL /*<< SCB_DFSR_HALTED_Pos*/) /*!< SCB DFSR: HALTED Mask */ - -/* SCB Non-Secure Access Control Register Definitions */ -#define SCB_NSACR_CP11_Pos 11U /*!< SCB NSACR: CP11 Position */ -#define SCB_NSACR_CP11_Msk (1UL << SCB_NSACR_CP11_Pos) /*!< SCB NSACR: CP11 Mask */ - -#define SCB_NSACR_CP10_Pos 10U /*!< SCB NSACR: CP10 Position */ -#define SCB_NSACR_CP10_Msk (1UL << SCB_NSACR_CP10_Pos) /*!< SCB NSACR: CP10 Mask */ - -#define SCB_NSACR_CPn_Pos 0U /*!< SCB NSACR: CPn Position */ -#define SCB_NSACR_CPn_Msk (1UL /*<< SCB_NSACR_CPn_Pos*/) /*!< SCB NSACR: CPn Mask */ - -/* SCB Cache Level ID Register Definitions */ -#define SCB_CLIDR_LOUU_Pos 27U /*!< SCB CLIDR: LoUU Position */ -#define SCB_CLIDR_LOUU_Msk (7UL << SCB_CLIDR_LOUU_Pos) /*!< SCB CLIDR: LoUU Mask */ - -#define SCB_CLIDR_LOC_Pos 24U /*!< SCB CLIDR: LoC Position */ -#define SCB_CLIDR_LOC_Msk (7UL << SCB_CLIDR_LOC_Pos) /*!< SCB CLIDR: LoC Mask */ - -/* SCB Cache Type Register Definitions */ -#define SCB_CTR_FORMAT_Pos 29U /*!< SCB CTR: Format Position */ -#define SCB_CTR_FORMAT_Msk (7UL << SCB_CTR_FORMAT_Pos) /*!< SCB CTR: Format Mask */ - -#define SCB_CTR_CWG_Pos 24U /*!< SCB CTR: CWG Position */ -#define SCB_CTR_CWG_Msk (0xFUL << SCB_CTR_CWG_Pos) /*!< SCB CTR: CWG Mask */ - -#define SCB_CTR_ERG_Pos 20U /*!< SCB CTR: ERG Position */ -#define SCB_CTR_ERG_Msk (0xFUL << SCB_CTR_ERG_Pos) /*!< SCB CTR: ERG Mask */ - -#define SCB_CTR_DMINLINE_Pos 16U /*!< SCB CTR: DminLine Position */ -#define SCB_CTR_DMINLINE_Msk (0xFUL << SCB_CTR_DMINLINE_Pos) /*!< SCB CTR: DminLine Mask */ - -#define SCB_CTR_IMINLINE_Pos 0U /*!< SCB CTR: ImInLine Position */ -#define SCB_CTR_IMINLINE_Msk (0xFUL /*<< SCB_CTR_IMINLINE_Pos*/) /*!< SCB CTR: ImInLine Mask */ - -/* SCB Cache Size ID Register Definitions */ -#define SCB_CCSIDR_WT_Pos 31U /*!< SCB CCSIDR: WT Position */ -#define SCB_CCSIDR_WT_Msk (1UL << SCB_CCSIDR_WT_Pos) /*!< SCB CCSIDR: WT Mask */ - -#define SCB_CCSIDR_WB_Pos 30U /*!< SCB CCSIDR: WB Position */ -#define SCB_CCSIDR_WB_Msk (1UL << SCB_CCSIDR_WB_Pos) /*!< SCB CCSIDR: WB Mask */ - -#define SCB_CCSIDR_RA_Pos 29U /*!< SCB CCSIDR: RA Position */ -#define SCB_CCSIDR_RA_Msk (1UL << SCB_CCSIDR_RA_Pos) /*!< SCB CCSIDR: RA Mask */ - -#define SCB_CCSIDR_WA_Pos 28U /*!< SCB CCSIDR: WA Position */ -#define SCB_CCSIDR_WA_Msk (1UL << SCB_CCSIDR_WA_Pos) /*!< SCB CCSIDR: WA Mask */ - -#define SCB_CCSIDR_NUMSETS_Pos 13U /*!< SCB CCSIDR: NumSets Position */ -#define SCB_CCSIDR_NUMSETS_Msk (0x7FFFUL << SCB_CCSIDR_NUMSETS_Pos) /*!< SCB CCSIDR: NumSets Mask */ - -#define SCB_CCSIDR_ASSOCIATIVITY_Pos 3U /*!< SCB CCSIDR: Associativity Position */ -#define SCB_CCSIDR_ASSOCIATIVITY_Msk (0x3FFUL << SCB_CCSIDR_ASSOCIATIVITY_Pos) /*!< SCB CCSIDR: Associativity Mask */ - -#define SCB_CCSIDR_LINESIZE_Pos 0U /*!< SCB CCSIDR: LineSize Position */ -#define SCB_CCSIDR_LINESIZE_Msk (7UL /*<< SCB_CCSIDR_LINESIZE_Pos*/) /*!< SCB CCSIDR: LineSize Mask */ - -/* SCB Cache Size Selection Register Definitions */ -#define SCB_CSSELR_LEVEL_Pos 1U /*!< SCB CSSELR: Level Position */ -#define SCB_CSSELR_LEVEL_Msk (7UL << SCB_CSSELR_LEVEL_Pos) /*!< SCB CSSELR: Level Mask */ - -#define SCB_CSSELR_IND_Pos 0U /*!< SCB CSSELR: InD Position */ -#define SCB_CSSELR_IND_Msk (1UL /*<< SCB_CSSELR_IND_Pos*/) /*!< SCB CSSELR: InD Mask */ - -/* SCB Software Triggered Interrupt Register Definitions */ -#define SCB_STIR_INTID_Pos 0U /*!< SCB STIR: INTID Position */ -#define SCB_STIR_INTID_Msk (0x1FFUL /*<< SCB_STIR_INTID_Pos*/) /*!< SCB STIR: INTID Mask */ - -/* SCB D-Cache Invalidate by Set-way Register Definitions */ -#define SCB_DCISW_WAY_Pos 30U /*!< SCB DCISW: Way Position */ -#define SCB_DCISW_WAY_Msk (3UL << SCB_DCISW_WAY_Pos) /*!< SCB DCISW: Way Mask */ - -#define SCB_DCISW_SET_Pos 5U /*!< SCB DCISW: Set Position */ -#define SCB_DCISW_SET_Msk (0x1FFUL << SCB_DCISW_SET_Pos) /*!< SCB DCISW: Set Mask */ - -/* SCB D-Cache Clean by Set-way Register Definitions */ -#define SCB_DCCSW_WAY_Pos 30U /*!< SCB DCCSW: Way Position */ -#define SCB_DCCSW_WAY_Msk (3UL << SCB_DCCSW_WAY_Pos) /*!< SCB DCCSW: Way Mask */ - -#define SCB_DCCSW_SET_Pos 5U /*!< SCB DCCSW: Set Position */ -#define SCB_DCCSW_SET_Msk (0x1FFUL << SCB_DCCSW_SET_Pos) /*!< SCB DCCSW: Set Mask */ - -/* SCB D-Cache Clean and Invalidate by Set-way Register Definitions */ -#define SCB_DCCISW_WAY_Pos 30U /*!< SCB DCCISW: Way Position */ -#define SCB_DCCISW_WAY_Msk (3UL << SCB_DCCISW_WAY_Pos) /*!< SCB DCCISW: Way Mask */ - -#define SCB_DCCISW_SET_Pos 5U /*!< SCB DCCISW: Set Position */ -#define SCB_DCCISW_SET_Msk (0x1FFUL << SCB_DCCISW_SET_Pos) /*!< SCB DCCISW: Set Mask */ - -/* Instruction Tightly-Coupled Memory Control Register Definitions */ -#define SCB_ITCMCR_SZ_Pos 3U /*!< SCB ITCMCR: SZ Position */ -#define SCB_ITCMCR_SZ_Msk (0xFUL << SCB_ITCMCR_SZ_Pos) /*!< SCB ITCMCR: SZ Mask */ - -#define SCB_ITCMCR_RETEN_Pos 2U /*!< SCB ITCMCR: RETEN Position */ -#define SCB_ITCMCR_RETEN_Msk (1UL << SCB_ITCMCR_RETEN_Pos) /*!< SCB ITCMCR: RETEN Mask */ - -#define SCB_ITCMCR_RMW_Pos 1U /*!< SCB ITCMCR: RMW Position */ -#define SCB_ITCMCR_RMW_Msk (1UL << SCB_ITCMCR_RMW_Pos) /*!< SCB ITCMCR: RMW Mask */ - -#define SCB_ITCMCR_EN_Pos 0U /*!< SCB ITCMCR: EN Position */ -#define SCB_ITCMCR_EN_Msk (1UL /*<< SCB_ITCMCR_EN_Pos*/) /*!< SCB ITCMCR: EN Mask */ - -/* Data Tightly-Coupled Memory Control Register Definitions */ -#define SCB_DTCMCR_SZ_Pos 3U /*!< SCB DTCMCR: SZ Position */ -#define SCB_DTCMCR_SZ_Msk (0xFUL << SCB_DTCMCR_SZ_Pos) /*!< SCB DTCMCR: SZ Mask */ - -#define SCB_DTCMCR_RETEN_Pos 2U /*!< SCB DTCMCR: RETEN Position */ -#define SCB_DTCMCR_RETEN_Msk (1UL << SCB_DTCMCR_RETEN_Pos) /*!< SCB DTCMCR: RETEN Mask */ - -#define SCB_DTCMCR_RMW_Pos 1U /*!< SCB DTCMCR: RMW Position */ -#define SCB_DTCMCR_RMW_Msk (1UL << SCB_DTCMCR_RMW_Pos) /*!< SCB DTCMCR: RMW Mask */ - -#define SCB_DTCMCR_EN_Pos 0U /*!< SCB DTCMCR: EN Position */ -#define SCB_DTCMCR_EN_Msk (1UL /*<< SCB_DTCMCR_EN_Pos*/) /*!< SCB DTCMCR: EN Mask */ - -/* AHBP Control Register Definitions */ -#define SCB_AHBPCR_SZ_Pos 1U /*!< SCB AHBPCR: SZ Position */ -#define SCB_AHBPCR_SZ_Msk (7UL << SCB_AHBPCR_SZ_Pos) /*!< SCB AHBPCR: SZ Mask */ - -#define SCB_AHBPCR_EN_Pos 0U /*!< SCB AHBPCR: EN Position */ -#define SCB_AHBPCR_EN_Msk (1UL /*<< SCB_AHBPCR_EN_Pos*/) /*!< SCB AHBPCR: EN Mask */ - -/* L1 Cache Control Register Definitions */ -#define SCB_CACR_FORCEWT_Pos 2U /*!< SCB CACR: FORCEWT Position */ -#define SCB_CACR_FORCEWT_Msk (1UL << SCB_CACR_FORCEWT_Pos) /*!< SCB CACR: FORCEWT Mask */ - -#define SCB_CACR_ECCEN_Pos 1U /*!< SCB CACR: ECCEN Position */ -#define SCB_CACR_ECCEN_Msk (1UL << SCB_CACR_ECCEN_Pos) /*!< SCB CACR: ECCEN Mask */ - -#define SCB_CACR_SIWT_Pos 0U /*!< SCB CACR: SIWT Position */ -#define SCB_CACR_SIWT_Msk (1UL /*<< SCB_CACR_SIWT_Pos*/) /*!< SCB CACR: SIWT Mask */ - -/* AHBS Control Register Definitions */ -#define SCB_AHBSCR_INITCOUNT_Pos 11U /*!< SCB AHBSCR: INITCOUNT Position */ -#define SCB_AHBSCR_INITCOUNT_Msk (0x1FUL << SCB_AHBPCR_INITCOUNT_Pos) /*!< SCB AHBSCR: INITCOUNT Mask */ - -#define SCB_AHBSCR_TPRI_Pos 2U /*!< SCB AHBSCR: TPRI Position */ -#define SCB_AHBSCR_TPRI_Msk (0x1FFUL << SCB_AHBPCR_TPRI_Pos) /*!< SCB AHBSCR: TPRI Mask */ - -#define SCB_AHBSCR_CTL_Pos 0U /*!< SCB AHBSCR: CTL Position*/ -#define SCB_AHBSCR_CTL_Msk (3UL /*<< SCB_AHBPCR_CTL_Pos*/) /*!< SCB AHBSCR: CTL Mask */ - -/* Auxiliary Bus Fault Status Register Definitions */ -#define SCB_ABFSR_AXIMTYPE_Pos 8U /*!< SCB ABFSR: AXIMTYPE Position*/ -#define SCB_ABFSR_AXIMTYPE_Msk (3UL << SCB_ABFSR_AXIMTYPE_Pos) /*!< SCB ABFSR: AXIMTYPE Mask */ - -#define SCB_ABFSR_EPPB_Pos 4U /*!< SCB ABFSR: EPPB Position*/ -#define SCB_ABFSR_EPPB_Msk (1UL << SCB_ABFSR_EPPB_Pos) /*!< SCB ABFSR: EPPB Mask */ - -#define SCB_ABFSR_AXIM_Pos 3U /*!< SCB ABFSR: AXIM Position*/ -#define SCB_ABFSR_AXIM_Msk (1UL << SCB_ABFSR_AXIM_Pos) /*!< SCB ABFSR: AXIM Mask */ - -#define SCB_ABFSR_AHBP_Pos 2U /*!< SCB ABFSR: AHBP Position*/ -#define SCB_ABFSR_AHBP_Msk (1UL << SCB_ABFSR_AHBP_Pos) /*!< SCB ABFSR: AHBP Mask */ - -#define SCB_ABFSR_DTCM_Pos 1U /*!< SCB ABFSR: DTCM Position*/ -#define SCB_ABFSR_DTCM_Msk (1UL << SCB_ABFSR_DTCM_Pos) /*!< SCB ABFSR: DTCM Mask */ - -#define SCB_ABFSR_ITCM_Pos 0U /*!< SCB ABFSR: ITCM Position*/ -#define SCB_ABFSR_ITCM_Msk (1UL /*<< SCB_ABFSR_ITCM_Pos*/) /*!< SCB ABFSR: ITCM Mask */ - -/*@} end of group CMSIS_SCB */ - - -/** - \ingroup CMSIS_core_register - \defgroup CMSIS_SCnSCB System Controls not in SCB (SCnSCB) - \brief Type definitions for the System Control and ID Register not in the SCB - @{ - */ - -/** - \brief Structure type to access the System Control and ID Register not in the SCB. - */ -typedef struct -{ - uint32_t RESERVED0[1U]; - __IM uint32_t ICTR; /*!< Offset: 0x004 (R/ ) Interrupt Controller Type Register */ - __IOM uint32_t ACTLR; /*!< Offset: 0x008 (R/W) Auxiliary Control Register */ - __IOM uint32_t CPPWR; /*!< Offset: 0x00C (R/W) Coprocessor Power Control Register */ -} SCnSCB_Type; - -/* Interrupt Controller Type Register Definitions */ -#define SCnSCB_ICTR_INTLINESNUM_Pos 0U /*!< ICTR: INTLINESNUM Position */ -#define SCnSCB_ICTR_INTLINESNUM_Msk (0xFUL /*<< SCnSCB_ICTR_INTLINESNUM_Pos*/) /*!< ICTR: INTLINESNUM Mask */ - -/*@} end of group CMSIS_SCnotSCB */ - - -/** - \ingroup CMSIS_core_register - \defgroup CMSIS_SysTick System Tick Timer (SysTick) - \brief Type definitions for the System Timer Registers. - @{ - */ - -/** - \brief Structure type to access the System Timer (SysTick). - */ -typedef struct -{ - __IOM uint32_t CTRL; /*!< Offset: 0x000 (R/W) SysTick Control and Status Register */ - __IOM uint32_t LOAD; /*!< Offset: 0x004 (R/W) SysTick Reload Value Register */ - __IOM uint32_t VAL; /*!< Offset: 0x008 (R/W) SysTick Current Value Register */ - __IM uint32_t CALIB; /*!< Offset: 0x00C (R/ ) SysTick Calibration Register */ -} SysTick_Type; - -/* SysTick Control / Status Register Definitions */ -#define SysTick_CTRL_COUNTFLAG_Pos 16U /*!< SysTick CTRL: COUNTFLAG Position */ -#define SysTick_CTRL_COUNTFLAG_Msk (1UL << SysTick_CTRL_COUNTFLAG_Pos) /*!< SysTick CTRL: COUNTFLAG Mask */ - -#define SysTick_CTRL_CLKSOURCE_Pos 2U /*!< SysTick CTRL: CLKSOURCE Position */ -#define SysTick_CTRL_CLKSOURCE_Msk (1UL << SysTick_CTRL_CLKSOURCE_Pos) /*!< SysTick CTRL: CLKSOURCE Mask */ - -#define SysTick_CTRL_TICKINT_Pos 1U /*!< SysTick CTRL: TICKINT Position */ -#define SysTick_CTRL_TICKINT_Msk (1UL << SysTick_CTRL_TICKINT_Pos) /*!< SysTick CTRL: TICKINT Mask */ - -#define SysTick_CTRL_ENABLE_Pos 0U /*!< SysTick CTRL: ENABLE Position */ -#define SysTick_CTRL_ENABLE_Msk (1UL /*<< SysTick_CTRL_ENABLE_Pos*/) /*!< SysTick CTRL: ENABLE Mask */ - -/* SysTick Reload Register Definitions */ -#define SysTick_LOAD_RELOAD_Pos 0U /*!< SysTick LOAD: RELOAD Position */ -#define SysTick_LOAD_RELOAD_Msk (0xFFFFFFUL /*<< SysTick_LOAD_RELOAD_Pos*/) /*!< SysTick LOAD: RELOAD Mask */ - -/* SysTick Current Register Definitions */ -#define SysTick_VAL_CURRENT_Pos 0U /*!< SysTick VAL: CURRENT Position */ -#define SysTick_VAL_CURRENT_Msk (0xFFFFFFUL /*<< SysTick_VAL_CURRENT_Pos*/) /*!< SysTick VAL: CURRENT Mask */ - -/* SysTick Calibration Register Definitions */ -#define SysTick_CALIB_NOREF_Pos 31U /*!< SysTick CALIB: NOREF Position */ -#define SysTick_CALIB_NOREF_Msk (1UL << SysTick_CALIB_NOREF_Pos) /*!< SysTick CALIB: NOREF Mask */ - -#define SysTick_CALIB_SKEW_Pos 30U /*!< SysTick CALIB: SKEW Position */ -#define SysTick_CALIB_SKEW_Msk (1UL << SysTick_CALIB_SKEW_Pos) /*!< SysTick CALIB: SKEW Mask */ - -#define SysTick_CALIB_TENMS_Pos 0U /*!< SysTick CALIB: TENMS Position */ -#define SysTick_CALIB_TENMS_Msk (0xFFFFFFUL /*<< SysTick_CALIB_TENMS_Pos*/) /*!< SysTick CALIB: TENMS Mask */ - -/*@} end of group CMSIS_SysTick */ - - -/** - \ingroup CMSIS_core_register - \defgroup CMSIS_ITM Instrumentation Trace Macrocell (ITM) - \brief Type definitions for the Instrumentation Trace Macrocell (ITM) - @{ - */ - -/** - \brief Structure type to access the Instrumentation Trace Macrocell Register (ITM). - */ -typedef struct -{ - __OM union - { - __OM uint8_t u8; /*!< Offset: 0x000 ( /W) ITM Stimulus Port 8-bit */ - __OM uint16_t u16; /*!< Offset: 0x000 ( /W) ITM Stimulus Port 16-bit */ - __OM uint32_t u32; /*!< Offset: 0x000 ( /W) ITM Stimulus Port 32-bit */ - } PORT [32U]; /*!< Offset: 0x000 ( /W) ITM Stimulus Port Registers */ - uint32_t RESERVED0[864U]; - __IOM uint32_t TER; /*!< Offset: 0xE00 (R/W) ITM Trace Enable Register */ - uint32_t RESERVED1[15U]; - __IOM uint32_t TPR; /*!< Offset: 0xE40 (R/W) ITM Trace Privilege Register */ - uint32_t RESERVED2[15U]; - __IOM uint32_t TCR; /*!< Offset: 0xE80 (R/W) ITM Trace Control Register */ - uint32_t RESERVED3[29U]; - __OM uint32_t IWR; /*!< Offset: 0xEF8 ( /W) ITM Integration Write Register */ - __IM uint32_t IRR; /*!< Offset: 0xEFC (R/ ) ITM Integration Read Register */ - __IOM uint32_t IMCR; /*!< Offset: 0xF00 (R/W) ITM Integration Mode Control Register */ - uint32_t RESERVED4[43U]; - __OM uint32_t LAR; /*!< Offset: 0xFB0 ( /W) ITM Lock Access Register */ - __IM uint32_t LSR; /*!< Offset: 0xFB4 (R/ ) ITM Lock Status Register */ - uint32_t RESERVED5[1U]; - __IM uint32_t DEVARCH; /*!< Offset: 0xFBC (R/ ) ITM Device Architecture Register */ - uint32_t RESERVED6[4U]; - __IM uint32_t PID4; /*!< Offset: 0xFD0 (R/ ) ITM Peripheral Identification Register #4 */ - __IM uint32_t PID5; /*!< Offset: 0xFD4 (R/ ) ITM Peripheral Identification Register #5 */ - __IM uint32_t PID6; /*!< Offset: 0xFD8 (R/ ) ITM Peripheral Identification Register #6 */ - __IM uint32_t PID7; /*!< Offset: 0xFDC (R/ ) ITM Peripheral Identification Register #7 */ - __IM uint32_t PID0; /*!< Offset: 0xFE0 (R/ ) ITM Peripheral Identification Register #0 */ - __IM uint32_t PID1; /*!< Offset: 0xFE4 (R/ ) ITM Peripheral Identification Register #1 */ - __IM uint32_t PID2; /*!< Offset: 0xFE8 (R/ ) ITM Peripheral Identification Register #2 */ - __IM uint32_t PID3; /*!< Offset: 0xFEC (R/ ) ITM Peripheral Identification Register #3 */ - __IM uint32_t CID0; /*!< Offset: 0xFF0 (R/ ) ITM Component Identification Register #0 */ - __IM uint32_t CID1; /*!< Offset: 0xFF4 (R/ ) ITM Component Identification Register #1 */ - __IM uint32_t CID2; /*!< Offset: 0xFF8 (R/ ) ITM Component Identification Register #2 */ - __IM uint32_t CID3; /*!< Offset: 0xFFC (R/ ) ITM Component Identification Register #3 */ -} ITM_Type; - -/* ITM Stimulus Port Register Definitions */ -#define ITM_STIM_DISABLED_Pos 1U /*!< ITM STIM: DISABLED Position */ -#define ITM_STIM_DISABLED_Msk (0x1UL << ITM_STIM_DISABLED_Pos) /*!< ITM STIM: DISABLED Mask */ - -#define ITM_STIM_FIFOREADY_Pos 0U /*!< ITM STIM: FIFOREADY Position */ -#define ITM_STIM_FIFOREADY_Msk (0x1UL /*<< ITM_STIM_FIFOREADY_Pos*/) /*!< ITM STIM: FIFOREADY Mask */ - -/* ITM Trace Privilege Register Definitions */ -#define ITM_TPR_PRIVMASK_Pos 0U /*!< ITM TPR: PRIVMASK Position */ -#define ITM_TPR_PRIVMASK_Msk (0xFFFFFFFFUL /*<< ITM_TPR_PRIVMASK_Pos*/) /*!< ITM TPR: PRIVMASK Mask */ - -/* ITM Trace Control Register Definitions */ -#define ITM_TCR_BUSY_Pos 23U /*!< ITM TCR: BUSY Position */ -#define ITM_TCR_BUSY_Msk (1UL << ITM_TCR_BUSY_Pos) /*!< ITM TCR: BUSY Mask */ - -#define ITM_TCR_TRACEBUSID_Pos 16U /*!< ITM TCR: ATBID Position */ -#define ITM_TCR_TRACEBUSID_Msk (0x7FUL << ITM_TCR_TRACEBUSID_Pos) /*!< ITM TCR: ATBID Mask */ - -#define ITM_TCR_GTSFREQ_Pos 10U /*!< ITM TCR: Global timestamp frequency Position */ -#define ITM_TCR_GTSFREQ_Msk (3UL << ITM_TCR_GTSFREQ_Pos) /*!< ITM TCR: Global timestamp frequency Mask */ - -#define ITM_TCR_TSPRESCALE_Pos 8U /*!< ITM TCR: TSPRESCALE Position */ -#define ITM_TCR_TSPRESCALE_Msk (3UL << ITM_TCR_TSPRESCALE_Pos) /*!< ITM TCR: TSPRESCALE Mask */ - -#define ITM_TCR_STALLENA_Pos 5U /*!< ITM TCR: STALLENA Position */ -#define ITM_TCR_STALLENA_Msk (1UL << ITM_TCR_STALLENA_Pos) /*!< ITM TCR: STALLENA Mask */ - -#define ITM_TCR_SWOENA_Pos 4U /*!< ITM TCR: SWOENA Position */ -#define ITM_TCR_SWOENA_Msk (1UL << ITM_TCR_SWOENA_Pos) /*!< ITM TCR: SWOENA Mask */ - -#define ITM_TCR_DWTENA_Pos 3U /*!< ITM TCR: DWTENA Position */ -#define ITM_TCR_DWTENA_Msk (1UL << ITM_TCR_DWTENA_Pos) /*!< ITM TCR: DWTENA Mask */ - -#define ITM_TCR_SYNCENA_Pos 2U /*!< ITM TCR: SYNCENA Position */ -#define ITM_TCR_SYNCENA_Msk (1UL << ITM_TCR_SYNCENA_Pos) /*!< ITM TCR: SYNCENA Mask */ - -#define ITM_TCR_TSENA_Pos 1U /*!< ITM TCR: TSENA Position */ -#define ITM_TCR_TSENA_Msk (1UL << ITM_TCR_TSENA_Pos) /*!< ITM TCR: TSENA Mask */ - -#define ITM_TCR_ITMENA_Pos 0U /*!< ITM TCR: ITM Enable bit Position */ -#define ITM_TCR_ITMENA_Msk (1UL /*<< ITM_TCR_ITMENA_Pos*/) /*!< ITM TCR: ITM Enable bit Mask */ - -/* ITM Integration Write Register Definitions */ -#define ITM_IWR_ATVALIDM_Pos 0U /*!< ITM IWR: ATVALIDM Position */ -#define ITM_IWR_ATVALIDM_Msk (1UL /*<< ITM_IWR_ATVALIDM_Pos*/) /*!< ITM IWR: ATVALIDM Mask */ - -/* ITM Integration Read Register Definitions */ -#define ITM_IRR_ATREADYM_Pos 0U /*!< ITM IRR: ATREADYM Position */ -#define ITM_IRR_ATREADYM_Msk (1UL /*<< ITM_IRR_ATREADYM_Pos*/) /*!< ITM IRR: ATREADYM Mask */ - -/* ITM Integration Mode Control Register Definitions */ -#define ITM_IMCR_INTEGRATION_Pos 0U /*!< ITM IMCR: INTEGRATION Position */ -#define ITM_IMCR_INTEGRATION_Msk (1UL /*<< ITM_IMCR_INTEGRATION_Pos*/) /*!< ITM IMCR: INTEGRATION Mask */ - -/* ITM Lock Status Register Definitions */ -#define ITM_LSR_ByteAcc_Pos 2U /*!< ITM LSR: ByteAcc Position */ -#define ITM_LSR_ByteAcc_Msk (1UL << ITM_LSR_ByteAcc_Pos) /*!< ITM LSR: ByteAcc Mask */ - -#define ITM_LSR_Access_Pos 1U /*!< ITM LSR: Access Position */ -#define ITM_LSR_Access_Msk (1UL << ITM_LSR_Access_Pos) /*!< ITM LSR: Access Mask */ - -#define ITM_LSR_Present_Pos 0U /*!< ITM LSR: Present Position */ -#define ITM_LSR_Present_Msk (1UL /*<< ITM_LSR_Present_Pos*/) /*!< ITM LSR: Present Mask */ - -/*@}*/ /* end of group CMSIS_ITM */ - - -/** - \ingroup CMSIS_core_register - \defgroup CMSIS_DWT Data Watchpoint and Trace (DWT) - \brief Type definitions for the Data Watchpoint and Trace (DWT) - @{ - */ - -/** - \brief Structure type to access the Data Watchpoint and Trace Register (DWT). - */ -typedef struct -{ - __IOM uint32_t CTRL; /*!< Offset: 0x000 (R/W) Control Register */ - __IOM uint32_t CYCCNT; /*!< Offset: 0x004 (R/W) Cycle Count Register */ - __IOM uint32_t CPICNT; /*!< Offset: 0x008 (R/W) CPI Count Register */ - __IOM uint32_t EXCCNT; /*!< Offset: 0x00C (R/W) Exception Overhead Count Register */ - __IOM uint32_t SLEEPCNT; /*!< Offset: 0x010 (R/W) Sleep Count Register */ - __IOM uint32_t LSUCNT; /*!< Offset: 0x014 (R/W) LSU Count Register */ - __IOM uint32_t FOLDCNT; /*!< Offset: 0x018 (R/W) Folded-instruction Count Register */ - __IM uint32_t PCSR; /*!< Offset: 0x01C (R/ ) Program Counter Sample Register */ - __IOM uint32_t COMP0; /*!< Offset: 0x020 (R/W) Comparator Register 0 */ - uint32_t RESERVED1[1U]; - __IOM uint32_t FUNCTION0; /*!< Offset: 0x028 (R/W) Function Register 0 */ - uint32_t RESERVED2[1U]; - __IOM uint32_t COMP1; /*!< Offset: 0x030 (R/W) Comparator Register 1 */ - uint32_t RESERVED3[1U]; - __IOM uint32_t FUNCTION1; /*!< Offset: 0x038 (R/W) Function Register 1 */ - uint32_t RESERVED4[1U]; - __IOM uint32_t COMP2; /*!< Offset: 0x040 (R/W) Comparator Register 2 */ - uint32_t RESERVED5[1U]; - __IOM uint32_t FUNCTION2; /*!< Offset: 0x048 (R/W) Function Register 2 */ - uint32_t RESERVED6[1U]; - __IOM uint32_t COMP3; /*!< Offset: 0x050 (R/W) Comparator Register 3 */ - uint32_t RESERVED7[1U]; - __IOM uint32_t FUNCTION3; /*!< Offset: 0x058 (R/W) Function Register 3 */ - uint32_t RESERVED8[1U]; - __IOM uint32_t COMP4; /*!< Offset: 0x060 (R/W) Comparator Register 4 */ - uint32_t RESERVED9[1U]; - __IOM uint32_t FUNCTION4; /*!< Offset: 0x068 (R/W) Function Register 4 */ - uint32_t RESERVED10[1U]; - __IOM uint32_t COMP5; /*!< Offset: 0x070 (R/W) Comparator Register 5 */ - uint32_t RESERVED11[1U]; - __IOM uint32_t FUNCTION5; /*!< Offset: 0x078 (R/W) Function Register 5 */ - uint32_t RESERVED12[1U]; - __IOM uint32_t COMP6; /*!< Offset: 0x080 (R/W) Comparator Register 6 */ - uint32_t RESERVED13[1U]; - __IOM uint32_t FUNCTION6; /*!< Offset: 0x088 (R/W) Function Register 6 */ - uint32_t RESERVED14[1U]; - __IOM uint32_t COMP7; /*!< Offset: 0x090 (R/W) Comparator Register 7 */ - uint32_t RESERVED15[1U]; - __IOM uint32_t FUNCTION7; /*!< Offset: 0x098 (R/W) Function Register 7 */ - uint32_t RESERVED16[1U]; - __IOM uint32_t COMP8; /*!< Offset: 0x0A0 (R/W) Comparator Register 8 */ - uint32_t RESERVED17[1U]; - __IOM uint32_t FUNCTION8; /*!< Offset: 0x0A8 (R/W) Function Register 8 */ - uint32_t RESERVED18[1U]; - __IOM uint32_t COMP9; /*!< Offset: 0x0B0 (R/W) Comparator Register 9 */ - uint32_t RESERVED19[1U]; - __IOM uint32_t FUNCTION9; /*!< Offset: 0x0B8 (R/W) Function Register 9 */ - uint32_t RESERVED20[1U]; - __IOM uint32_t COMP10; /*!< Offset: 0x0C0 (R/W) Comparator Register 10 */ - uint32_t RESERVED21[1U]; - __IOM uint32_t FUNCTION10; /*!< Offset: 0x0C8 (R/W) Function Register 10 */ - uint32_t RESERVED22[1U]; - __IOM uint32_t COMP11; /*!< Offset: 0x0D0 (R/W) Comparator Register 11 */ - uint32_t RESERVED23[1U]; - __IOM uint32_t FUNCTION11; /*!< Offset: 0x0D8 (R/W) Function Register 11 */ - uint32_t RESERVED24[1U]; - __IOM uint32_t COMP12; /*!< Offset: 0x0E0 (R/W) Comparator Register 12 */ - uint32_t RESERVED25[1U]; - __IOM uint32_t FUNCTION12; /*!< Offset: 0x0E8 (R/W) Function Register 12 */ - uint32_t RESERVED26[1U]; - __IOM uint32_t COMP13; /*!< Offset: 0x0F0 (R/W) Comparator Register 13 */ - uint32_t RESERVED27[1U]; - __IOM uint32_t FUNCTION13; /*!< Offset: 0x0F8 (R/W) Function Register 13 */ - uint32_t RESERVED28[1U]; - __IOM uint32_t COMP14; /*!< Offset: 0x100 (R/W) Comparator Register 14 */ - uint32_t RESERVED29[1U]; - __IOM uint32_t FUNCTION14; /*!< Offset: 0x108 (R/W) Function Register 14 */ - uint32_t RESERVED30[1U]; - __IOM uint32_t COMP15; /*!< Offset: 0x110 (R/W) Comparator Register 15 */ - uint32_t RESERVED31[1U]; - __IOM uint32_t FUNCTION15; /*!< Offset: 0x118 (R/W) Function Register 15 */ - uint32_t RESERVED32[934U]; - __IM uint32_t LSR; /*!< Offset: 0xFB4 (R ) Lock Status Register */ - uint32_t RESERVED33[1U]; - __IM uint32_t DEVARCH; /*!< Offset: 0xFBC (R/ ) Device Architecture Register */ -} DWT_Type; - -/* DWT Control Register Definitions */ -#define DWT_CTRL_NUMCOMP_Pos 28U /*!< DWT CTRL: NUMCOMP Position */ -#define DWT_CTRL_NUMCOMP_Msk (0xFUL << DWT_CTRL_NUMCOMP_Pos) /*!< DWT CTRL: NUMCOMP Mask */ - -#define DWT_CTRL_NOTRCPKT_Pos 27U /*!< DWT CTRL: NOTRCPKT Position */ -#define DWT_CTRL_NOTRCPKT_Msk (0x1UL << DWT_CTRL_NOTRCPKT_Pos) /*!< DWT CTRL: NOTRCPKT Mask */ - -#define DWT_CTRL_NOEXTTRIG_Pos 26U /*!< DWT CTRL: NOEXTTRIG Position */ -#define DWT_CTRL_NOEXTTRIG_Msk (0x1UL << DWT_CTRL_NOEXTTRIG_Pos) /*!< DWT CTRL: NOEXTTRIG Mask */ - -#define DWT_CTRL_NOCYCCNT_Pos 25U /*!< DWT CTRL: NOCYCCNT Position */ -#define DWT_CTRL_NOCYCCNT_Msk (0x1UL << DWT_CTRL_NOCYCCNT_Pos) /*!< DWT CTRL: NOCYCCNT Mask */ - -#define DWT_CTRL_NOPRFCNT_Pos 24U /*!< DWT CTRL: NOPRFCNT Position */ -#define DWT_CTRL_NOPRFCNT_Msk (0x1UL << DWT_CTRL_NOPRFCNT_Pos) /*!< DWT CTRL: NOPRFCNT Mask */ - -#define DWT_CTRL_CYCDISS_Pos 23U /*!< DWT CTRL: CYCDISS Position */ -#define DWT_CTRL_CYCDISS_Msk (0x1UL << DWT_CTRL_CYCDISS_Pos) /*!< DWT CTRL: CYCDISS Mask */ - -#define DWT_CTRL_CYCEVTENA_Pos 22U /*!< DWT CTRL: CYCEVTENA Position */ -#define DWT_CTRL_CYCEVTENA_Msk (0x1UL << DWT_CTRL_CYCEVTENA_Pos) /*!< DWT CTRL: CYCEVTENA Mask */ - -#define DWT_CTRL_FOLDEVTENA_Pos 21U /*!< DWT CTRL: FOLDEVTENA Position */ -#define DWT_CTRL_FOLDEVTENA_Msk (0x1UL << DWT_CTRL_FOLDEVTENA_Pos) /*!< DWT CTRL: FOLDEVTENA Mask */ - -#define DWT_CTRL_LSUEVTENA_Pos 20U /*!< DWT CTRL: LSUEVTENA Position */ -#define DWT_CTRL_LSUEVTENA_Msk (0x1UL << DWT_CTRL_LSUEVTENA_Pos) /*!< DWT CTRL: LSUEVTENA Mask */ - -#define DWT_CTRL_SLEEPEVTENA_Pos 19U /*!< DWT CTRL: SLEEPEVTENA Position */ -#define DWT_CTRL_SLEEPEVTENA_Msk (0x1UL << DWT_CTRL_SLEEPEVTENA_Pos) /*!< DWT CTRL: SLEEPEVTENA Mask */ - -#define DWT_CTRL_EXCEVTENA_Pos 18U /*!< DWT CTRL: EXCEVTENA Position */ -#define DWT_CTRL_EXCEVTENA_Msk (0x1UL << DWT_CTRL_EXCEVTENA_Pos) /*!< DWT CTRL: EXCEVTENA Mask */ - -#define DWT_CTRL_CPIEVTENA_Pos 17U /*!< DWT CTRL: CPIEVTENA Position */ -#define DWT_CTRL_CPIEVTENA_Msk (0x1UL << DWT_CTRL_CPIEVTENA_Pos) /*!< DWT CTRL: CPIEVTENA Mask */ - -#define DWT_CTRL_EXCTRCENA_Pos 16U /*!< DWT CTRL: EXCTRCENA Position */ -#define DWT_CTRL_EXCTRCENA_Msk (0x1UL << DWT_CTRL_EXCTRCENA_Pos) /*!< DWT CTRL: EXCTRCENA Mask */ - -#define DWT_CTRL_PCSAMPLENA_Pos 12U /*!< DWT CTRL: PCSAMPLENA Position */ -#define DWT_CTRL_PCSAMPLENA_Msk (0x1UL << DWT_CTRL_PCSAMPLENA_Pos) /*!< DWT CTRL: PCSAMPLENA Mask */ - -#define DWT_CTRL_SYNCTAP_Pos 10U /*!< DWT CTRL: SYNCTAP Position */ -#define DWT_CTRL_SYNCTAP_Msk (0x3UL << DWT_CTRL_SYNCTAP_Pos) /*!< DWT CTRL: SYNCTAP Mask */ - -#define DWT_CTRL_CYCTAP_Pos 9U /*!< DWT CTRL: CYCTAP Position */ -#define DWT_CTRL_CYCTAP_Msk (0x1UL << DWT_CTRL_CYCTAP_Pos) /*!< DWT CTRL: CYCTAP Mask */ - -#define DWT_CTRL_POSTINIT_Pos 5U /*!< DWT CTRL: POSTINIT Position */ -#define DWT_CTRL_POSTINIT_Msk (0xFUL << DWT_CTRL_POSTINIT_Pos) /*!< DWT CTRL: POSTINIT Mask */ - -#define DWT_CTRL_POSTPRESET_Pos 1U /*!< DWT CTRL: POSTPRESET Position */ -#define DWT_CTRL_POSTPRESET_Msk (0xFUL << DWT_CTRL_POSTPRESET_Pos) /*!< DWT CTRL: POSTPRESET Mask */ - -#define DWT_CTRL_CYCCNTENA_Pos 0U /*!< DWT CTRL: CYCCNTENA Position */ -#define DWT_CTRL_CYCCNTENA_Msk (0x1UL /*<< DWT_CTRL_CYCCNTENA_Pos*/) /*!< DWT CTRL: CYCCNTENA Mask */ - -/* DWT CPI Count Register Definitions */ -#define DWT_CPICNT_CPICNT_Pos 0U /*!< DWT CPICNT: CPICNT Position */ -#define DWT_CPICNT_CPICNT_Msk (0xFFUL /*<< DWT_CPICNT_CPICNT_Pos*/) /*!< DWT CPICNT: CPICNT Mask */ - -/* DWT Exception Overhead Count Register Definitions */ -#define DWT_EXCCNT_EXCCNT_Pos 0U /*!< DWT EXCCNT: EXCCNT Position */ -#define DWT_EXCCNT_EXCCNT_Msk (0xFFUL /*<< DWT_EXCCNT_EXCCNT_Pos*/) /*!< DWT EXCCNT: EXCCNT Mask */ - -/* DWT Sleep Count Register Definitions */ -#define DWT_SLEEPCNT_SLEEPCNT_Pos 0U /*!< DWT SLEEPCNT: SLEEPCNT Position */ -#define DWT_SLEEPCNT_SLEEPCNT_Msk (0xFFUL /*<< DWT_SLEEPCNT_SLEEPCNT_Pos*/) /*!< DWT SLEEPCNT: SLEEPCNT Mask */ - -/* DWT LSU Count Register Definitions */ -#define DWT_LSUCNT_LSUCNT_Pos 0U /*!< DWT LSUCNT: LSUCNT Position */ -#define DWT_LSUCNT_LSUCNT_Msk (0xFFUL /*<< DWT_LSUCNT_LSUCNT_Pos*/) /*!< DWT LSUCNT: LSUCNT Mask */ - -/* DWT Folded-instruction Count Register Definitions */ -#define DWT_FOLDCNT_FOLDCNT_Pos 0U /*!< DWT FOLDCNT: FOLDCNT Position */ -#define DWT_FOLDCNT_FOLDCNT_Msk (0xFFUL /*<< DWT_FOLDCNT_FOLDCNT_Pos*/) /*!< DWT FOLDCNT: FOLDCNT Mask */ - -/* DWT Comparator Function Register Definitions */ -#define DWT_FUNCTION_ID_Pos 27U /*!< DWT FUNCTION: ID Position */ -#define DWT_FUNCTION_ID_Msk (0x1FUL << DWT_FUNCTION_ID_Pos) /*!< DWT FUNCTION: ID Mask */ - -#define DWT_FUNCTION_MATCHED_Pos 24U /*!< DWT FUNCTION: MATCHED Position */ -#define DWT_FUNCTION_MATCHED_Msk (0x1UL << DWT_FUNCTION_MATCHED_Pos) /*!< DWT FUNCTION: MATCHED Mask */ - -#define DWT_FUNCTION_DATAVSIZE_Pos 10U /*!< DWT FUNCTION: DATAVSIZE Position */ -#define DWT_FUNCTION_DATAVSIZE_Msk (0x3UL << DWT_FUNCTION_DATAVSIZE_Pos) /*!< DWT FUNCTION: DATAVSIZE Mask */ - -#define DWT_FUNCTION_ACTION_Pos 4U /*!< DWT FUNCTION: ACTION Position */ -#define DWT_FUNCTION_ACTION_Msk (0x1UL << DWT_FUNCTION_ACTION_Pos) /*!< DWT FUNCTION: ACTION Mask */ - -#define DWT_FUNCTION_MATCH_Pos 0U /*!< DWT FUNCTION: MATCH Position */ -#define DWT_FUNCTION_MATCH_Msk (0xFUL /*<< DWT_FUNCTION_MATCH_Pos*/) /*!< DWT FUNCTION: MATCH Mask */ - -/*@}*/ /* end of group CMSIS_DWT */ - - -/** - \ingroup CMSIS_core_register - \defgroup CMSIS_TPI Trace Port Interface (TPI) - \brief Type definitions for the Trace Port Interface (TPI) - @{ - */ - -/** - \brief Structure type to access the Trace Port Interface Register (TPI). - */ -typedef struct -{ - __IM uint32_t SSPSR; /*!< Offset: 0x000 (R/ ) Supported Parallel Port Size Register */ - __IOM uint32_t CSPSR; /*!< Offset: 0x004 (R/W) Current Parallel Port Size Register */ - uint32_t RESERVED0[2U]; - __IOM uint32_t ACPR; /*!< Offset: 0x010 (R/W) Asynchronous Clock Prescaler Register */ - uint32_t RESERVED1[55U]; - __IOM uint32_t SPPR; /*!< Offset: 0x0F0 (R/W) Selected Pin Protocol Register */ - uint32_t RESERVED2[131U]; - __IM uint32_t FFSR; /*!< Offset: 0x300 (R/ ) Formatter and Flush Status Register */ - __IOM uint32_t FFCR; /*!< Offset: 0x304 (R/W) Formatter and Flush Control Register */ - __IOM uint32_t PSCR; /*!< Offset: 0x308 (R/W) Periodic Synchronization Control Register */ - uint32_t RESERVED3[759U]; - __IM uint32_t TRIGGER; /*!< Offset: 0xEE8 (R/ ) TRIGGER Register */ - __IM uint32_t ITFTTD0; /*!< Offset: 0xEEC (R/ ) Integration Test FIFO Test Data 0 Register */ - __IOM uint32_t ITATBCTR2; /*!< Offset: 0xEF0 (R/W) Integration Test ATB Control Register 2 */ - uint32_t RESERVED4[1U]; - __IM uint32_t ITATBCTR0; /*!< Offset: 0xEF8 (R/ ) Integration Test ATB Control Register 0 */ - __IM uint32_t ITFTTD1; /*!< Offset: 0xEFC (R/ ) Integration Test FIFO Test Data 1 Register */ - __IOM uint32_t ITCTRL; /*!< Offset: 0xF00 (R/W) Integration Mode Control */ - uint32_t RESERVED5[39U]; - __IOM uint32_t CLAIMSET; /*!< Offset: 0xFA0 (R/W) Claim tag set */ - __IOM uint32_t CLAIMCLR; /*!< Offset: 0xFA4 (R/W) Claim tag clear */ - uint32_t RESERVED7[8U]; - __IM uint32_t DEVID; /*!< Offset: 0xFC8 (R/ ) Device Configuration Register */ - __IM uint32_t DEVTYPE; /*!< Offset: 0xFCC (R/ ) Device Type Identifier Register */ -} TPI_Type; - -/* TPI Asynchronous Clock Prescaler Register Definitions */ -#define TPI_ACPR_PRESCALER_Pos 0U /*!< TPI ACPR: PRESCALER Position */ -#define TPI_ACPR_PRESCALER_Msk (0x1FFFUL /*<< TPI_ACPR_PRESCALER_Pos*/) /*!< TPI ACPR: PRESCALER Mask */ - -/* TPI Selected Pin Protocol Register Definitions */ -#define TPI_SPPR_TXMODE_Pos 0U /*!< TPI SPPR: TXMODE Position */ -#define TPI_SPPR_TXMODE_Msk (0x3UL /*<< TPI_SPPR_TXMODE_Pos*/) /*!< TPI SPPR: TXMODE Mask */ - -/* TPI Formatter and Flush Status Register Definitions */ -#define TPI_FFSR_FtNonStop_Pos 3U /*!< TPI FFSR: FtNonStop Position */ -#define TPI_FFSR_FtNonStop_Msk (0x1UL << TPI_FFSR_FtNonStop_Pos) /*!< TPI FFSR: FtNonStop Mask */ - -#define TPI_FFSR_TCPresent_Pos 2U /*!< TPI FFSR: TCPresent Position */ -#define TPI_FFSR_TCPresent_Msk (0x1UL << TPI_FFSR_TCPresent_Pos) /*!< TPI FFSR: TCPresent Mask */ - -#define TPI_FFSR_FtStopped_Pos 1U /*!< TPI FFSR: FtStopped Position */ -#define TPI_FFSR_FtStopped_Msk (0x1UL << TPI_FFSR_FtStopped_Pos) /*!< TPI FFSR: FtStopped Mask */ - -#define TPI_FFSR_FlInProg_Pos 0U /*!< TPI FFSR: FlInProg Position */ -#define TPI_FFSR_FlInProg_Msk (0x1UL /*<< TPI_FFSR_FlInProg_Pos*/) /*!< TPI FFSR: FlInProg Mask */ - -/* TPI Formatter and Flush Control Register Definitions */ -#define TPI_FFCR_TrigIn_Pos 8U /*!< TPI FFCR: TrigIn Position */ -#define TPI_FFCR_TrigIn_Msk (0x1UL << TPI_FFCR_TrigIn_Pos) /*!< TPI FFCR: TrigIn Mask */ - -#define TPI_FFCR_FOnMan_Pos 6U /*!< TPI FFCR: FOnMan Position */ -#define TPI_FFCR_FOnMan_Msk (0x1UL << TPI_FFCR_FOnMan_Pos) /*!< TPI FFCR: FOnMan Mask */ - -#define TPI_FFCR_EnFCont_Pos 1U /*!< TPI FFCR: EnFCont Position */ -#define TPI_FFCR_EnFCont_Msk (0x1UL << TPI_FFCR_EnFCont_Pos) /*!< TPI FFCR: EnFCont Mask */ - -/* TPI TRIGGER Register Definitions */ -#define TPI_TRIGGER_TRIGGER_Pos 0U /*!< TPI TRIGGER: TRIGGER Position */ -#define TPI_TRIGGER_TRIGGER_Msk (0x1UL /*<< TPI_TRIGGER_TRIGGER_Pos*/) /*!< TPI TRIGGER: TRIGGER Mask */ - -/* TPI Integration Test FIFO Test Data 0 Register Definitions */ -#define TPI_ITFTTD0_ATB_IF2_ATVALID_Pos 29U /*!< TPI ITFTTD0: ATB Interface 2 ATVALIDPosition */ -#define TPI_ITFTTD0_ATB_IF2_ATVALID_Msk (0x3UL << TPI_ITFTTD0_ATB_IF2_ATVALID_Pos) /*!< TPI ITFTTD0: ATB Interface 2 ATVALID Mask */ - -#define TPI_ITFTTD0_ATB_IF2_bytecount_Pos 27U /*!< TPI ITFTTD0: ATB Interface 2 byte count Position */ -#define TPI_ITFTTD0_ATB_IF2_bytecount_Msk (0x3UL << TPI_ITFTTD0_ATB_IF2_bytecount_Pos) /*!< TPI ITFTTD0: ATB Interface 2 byte count Mask */ - -#define TPI_ITFTTD0_ATB_IF1_ATVALID_Pos 26U /*!< TPI ITFTTD0: ATB Interface 1 ATVALID Position */ -#define TPI_ITFTTD0_ATB_IF1_ATVALID_Msk (0x3UL << TPI_ITFTTD0_ATB_IF1_ATVALID_Pos) /*!< TPI ITFTTD0: ATB Interface 1 ATVALID Mask */ - -#define TPI_ITFTTD0_ATB_IF1_bytecount_Pos 24U /*!< TPI ITFTTD0: ATB Interface 1 byte count Position */ -#define TPI_ITFTTD0_ATB_IF1_bytecount_Msk (0x3UL << TPI_ITFTTD0_ATB_IF1_bytecount_Pos) /*!< TPI ITFTTD0: ATB Interface 1 byte countt Mask */ - -#define TPI_ITFTTD0_ATB_IF1_data2_Pos 16U /*!< TPI ITFTTD0: ATB Interface 1 data2 Position */ -#define TPI_ITFTTD0_ATB_IF1_data2_Msk (0xFFUL << TPI_ITFTTD0_ATB_IF1_data1_Pos) /*!< TPI ITFTTD0: ATB Interface 1 data2 Mask */ - -#define TPI_ITFTTD0_ATB_IF1_data1_Pos 8U /*!< TPI ITFTTD0: ATB Interface 1 data1 Position */ -#define TPI_ITFTTD0_ATB_IF1_data1_Msk (0xFFUL << TPI_ITFTTD0_ATB_IF1_data1_Pos) /*!< TPI ITFTTD0: ATB Interface 1 data1 Mask */ - -#define TPI_ITFTTD0_ATB_IF1_data0_Pos 0U /*!< TPI ITFTTD0: ATB Interface 1 data0 Position */ -#define TPI_ITFTTD0_ATB_IF1_data0_Msk (0xFFUL /*<< TPI_ITFTTD0_ATB_IF1_data0_Pos*/) /*!< TPI ITFTTD0: ATB Interface 1 data0 Mask */ - -/* TPI Integration Test ATB Control Register 2 Register Definitions */ -#define TPI_ITATBCTR2_AFVALID2S_Pos 1U /*!< TPI ITATBCTR2: AFVALID2S Position */ -#define TPI_ITATBCTR2_AFVALID2S_Msk (0x1UL << TPI_ITATBCTR2_AFVALID2S_Pos) /*!< TPI ITATBCTR2: AFVALID2SS Mask */ - -#define TPI_ITATBCTR2_AFVALID1S_Pos 1U /*!< TPI ITATBCTR2: AFVALID1S Position */ -#define TPI_ITATBCTR2_AFVALID1S_Msk (0x1UL << TPI_ITATBCTR2_AFVALID1S_Pos) /*!< TPI ITATBCTR2: AFVALID1SS Mask */ - -#define TPI_ITATBCTR2_ATREADY2S_Pos 0U /*!< TPI ITATBCTR2: ATREADY2S Position */ -#define TPI_ITATBCTR2_ATREADY2S_Msk (0x1UL /*<< TPI_ITATBCTR2_ATREADY2S_Pos*/) /*!< TPI ITATBCTR2: ATREADY2S Mask */ - -#define TPI_ITATBCTR2_ATREADY1S_Pos 0U /*!< TPI ITATBCTR2: ATREADY1S Position */ -#define TPI_ITATBCTR2_ATREADY1S_Msk (0x1UL /*<< TPI_ITATBCTR2_ATREADY1S_Pos*/) /*!< TPI ITATBCTR2: ATREADY1S Mask */ - -/* TPI Integration Test FIFO Test Data 1 Register Definitions */ -#define TPI_ITFTTD1_ATB_IF2_ATVALID_Pos 29U /*!< TPI ITFTTD1: ATB Interface 2 ATVALID Position */ -#define TPI_ITFTTD1_ATB_IF2_ATVALID_Msk (0x3UL << TPI_ITFTTD1_ATB_IF2_ATVALID_Pos) /*!< TPI ITFTTD1: ATB Interface 2 ATVALID Mask */ - -#define TPI_ITFTTD1_ATB_IF2_bytecount_Pos 27U /*!< TPI ITFTTD1: ATB Interface 2 byte count Position */ -#define TPI_ITFTTD1_ATB_IF2_bytecount_Msk (0x3UL << TPI_ITFTTD1_ATB_IF2_bytecount_Pos) /*!< TPI ITFTTD1: ATB Interface 2 byte count Mask */ - -#define TPI_ITFTTD1_ATB_IF1_ATVALID_Pos 26U /*!< TPI ITFTTD1: ATB Interface 1 ATVALID Position */ -#define TPI_ITFTTD1_ATB_IF1_ATVALID_Msk (0x3UL << TPI_ITFTTD1_ATB_IF1_ATVALID_Pos) /*!< TPI ITFTTD1: ATB Interface 1 ATVALID Mask */ - -#define TPI_ITFTTD1_ATB_IF1_bytecount_Pos 24U /*!< TPI ITFTTD1: ATB Interface 1 byte count Position */ -#define TPI_ITFTTD1_ATB_IF1_bytecount_Msk (0x3UL << TPI_ITFTTD1_ATB_IF1_bytecount_Pos) /*!< TPI ITFTTD1: ATB Interface 1 byte countt Mask */ - -#define TPI_ITFTTD1_ATB_IF2_data2_Pos 16U /*!< TPI ITFTTD1: ATB Interface 2 data2 Position */ -#define TPI_ITFTTD1_ATB_IF2_data2_Msk (0xFFUL << TPI_ITFTTD1_ATB_IF2_data1_Pos) /*!< TPI ITFTTD1: ATB Interface 2 data2 Mask */ - -#define TPI_ITFTTD1_ATB_IF2_data1_Pos 8U /*!< TPI ITFTTD1: ATB Interface 2 data1 Position */ -#define TPI_ITFTTD1_ATB_IF2_data1_Msk (0xFFUL << TPI_ITFTTD1_ATB_IF2_data1_Pos) /*!< TPI ITFTTD1: ATB Interface 2 data1 Mask */ - -#define TPI_ITFTTD1_ATB_IF2_data0_Pos 0U /*!< TPI ITFTTD1: ATB Interface 2 data0 Position */ -#define TPI_ITFTTD1_ATB_IF2_data0_Msk (0xFFUL /*<< TPI_ITFTTD1_ATB_IF2_data0_Pos*/) /*!< TPI ITFTTD1: ATB Interface 2 data0 Mask */ - -/* TPI Integration Test ATB Control Register 0 Definitions */ -#define TPI_ITATBCTR0_AFVALID2S_Pos 1U /*!< TPI ITATBCTR0: AFVALID2S Position */ -#define TPI_ITATBCTR0_AFVALID2S_Msk (0x1UL << TPI_ITATBCTR0_AFVALID2S_Pos) /*!< TPI ITATBCTR0: AFVALID2SS Mask */ - -#define TPI_ITATBCTR0_AFVALID1S_Pos 1U /*!< TPI ITATBCTR0: AFVALID1S Position */ -#define TPI_ITATBCTR0_AFVALID1S_Msk (0x1UL << TPI_ITATBCTR0_AFVALID1S_Pos) /*!< TPI ITATBCTR0: AFVALID1SS Mask */ - -#define TPI_ITATBCTR0_ATREADY2S_Pos 0U /*!< TPI ITATBCTR0: ATREADY2S Position */ -#define TPI_ITATBCTR0_ATREADY2S_Msk (0x1UL /*<< TPI_ITATBCTR0_ATREADY2S_Pos*/) /*!< TPI ITATBCTR0: ATREADY2S Mask */ - -#define TPI_ITATBCTR0_ATREADY1S_Pos 0U /*!< TPI ITATBCTR0: ATREADY1S Position */ -#define TPI_ITATBCTR0_ATREADY1S_Msk (0x1UL /*<< TPI_ITATBCTR0_ATREADY1S_Pos*/) /*!< TPI ITATBCTR0: ATREADY1S Mask */ - -/* TPI Integration Mode Control Register Definitions */ -#define TPI_ITCTRL_Mode_Pos 0U /*!< TPI ITCTRL: Mode Position */ -#define TPI_ITCTRL_Mode_Msk (0x3UL /*<< TPI_ITCTRL_Mode_Pos*/) /*!< TPI ITCTRL: Mode Mask */ - -/* TPI DEVID Register Definitions */ -#define TPI_DEVID_NRZVALID_Pos 11U /*!< TPI DEVID: NRZVALID Position */ -#define TPI_DEVID_NRZVALID_Msk (0x1UL << TPI_DEVID_NRZVALID_Pos) /*!< TPI DEVID: NRZVALID Mask */ - -#define TPI_DEVID_MANCVALID_Pos 10U /*!< TPI DEVID: MANCVALID Position */ -#define TPI_DEVID_MANCVALID_Msk (0x1UL << TPI_DEVID_MANCVALID_Pos) /*!< TPI DEVID: MANCVALID Mask */ - -#define TPI_DEVID_PTINVALID_Pos 9U /*!< TPI DEVID: PTINVALID Position */ -#define TPI_DEVID_PTINVALID_Msk (0x1UL << TPI_DEVID_PTINVALID_Pos) /*!< TPI DEVID: PTINVALID Mask */ - -#define TPI_DEVID_FIFOSZ_Pos 6U /*!< TPI DEVID: FIFOSZ Position */ -#define TPI_DEVID_FIFOSZ_Msk (0x7UL << TPI_DEVID_FIFOSZ_Pos) /*!< TPI DEVID: FIFOSZ Mask */ - -#define TPI_DEVID_NrTraceInput_Pos 0U /*!< TPI DEVID: NrTraceInput Position */ -#define TPI_DEVID_NrTraceInput_Msk (0x3FUL /*<< TPI_DEVID_NrTraceInput_Pos*/) /*!< TPI DEVID: NrTraceInput Mask */ - -/* TPI DEVTYPE Register Definitions */ -#define TPI_DEVTYPE_SubType_Pos 4U /*!< TPI DEVTYPE: SubType Position */ -#define TPI_DEVTYPE_SubType_Msk (0xFUL /*<< TPI_DEVTYPE_SubType_Pos*/) /*!< TPI DEVTYPE: SubType Mask */ - -#define TPI_DEVTYPE_MajorType_Pos 0U /*!< TPI DEVTYPE: MajorType Position */ -#define TPI_DEVTYPE_MajorType_Msk (0xFUL << TPI_DEVTYPE_MajorType_Pos) /*!< TPI DEVTYPE: MajorType Mask */ - -/*@}*/ /* end of group CMSIS_TPI */ - - -#if defined (__MPU_PRESENT) && (__MPU_PRESENT == 1U) -/** - \ingroup CMSIS_core_register - \defgroup CMSIS_MPU Memory Protection Unit (MPU) - \brief Type definitions for the Memory Protection Unit (MPU) - @{ - */ - -/** - \brief Structure type to access the Memory Protection Unit (MPU). - */ -typedef struct -{ - __IM uint32_t TYPE; /*!< Offset: 0x000 (R/ ) MPU Type Register */ - __IOM uint32_t CTRL; /*!< Offset: 0x004 (R/W) MPU Control Register */ - __IOM uint32_t RNR; /*!< Offset: 0x008 (R/W) MPU Region Number Register */ - __IOM uint32_t RBAR; /*!< Offset: 0x00C (R/W) MPU Region Base Address Register */ - __IOM uint32_t RLAR; /*!< Offset: 0x010 (R/W) MPU Region Limit Address Register */ - __IOM uint32_t RBAR_A1; /*!< Offset: 0x014 (R/W) MPU Region Base Address Register Alias 1 */ - __IOM uint32_t RLAR_A1; /*!< Offset: 0x018 (R/W) MPU Region Limit Address Register Alias 1 */ - __IOM uint32_t RBAR_A2; /*!< Offset: 0x01C (R/W) MPU Region Base Address Register Alias 2 */ - __IOM uint32_t RLAR_A2; /*!< Offset: 0x020 (R/W) MPU Region Limit Address Register Alias 2 */ - __IOM uint32_t RBAR_A3; /*!< Offset: 0x024 (R/W) MPU Region Base Address Register Alias 3 */ - __IOM uint32_t RLAR_A3; /*!< Offset: 0x028 (R/W) MPU Region Limit Address Register Alias 3 */ - uint32_t RESERVED0[1]; - union { - __IOM uint32_t MAIR[2]; - struct { - __IOM uint32_t MAIR0; /*!< Offset: 0x030 (R/W) MPU Memory Attribute Indirection Register 0 */ - __IOM uint32_t MAIR1; /*!< Offset: 0x034 (R/W) MPU Memory Attribute Indirection Register 1 */ - }; - }; -} MPU_Type; - -#define MPU_TYPE_RALIASES 4U - -/* MPU Type Register Definitions */ -#define MPU_TYPE_IREGION_Pos 16U /*!< MPU TYPE: IREGION Position */ -#define MPU_TYPE_IREGION_Msk (0xFFUL << MPU_TYPE_IREGION_Pos) /*!< MPU TYPE: IREGION Mask */ - -#define MPU_TYPE_DREGION_Pos 8U /*!< MPU TYPE: DREGION Position */ -#define MPU_TYPE_DREGION_Msk (0xFFUL << MPU_TYPE_DREGION_Pos) /*!< MPU TYPE: DREGION Mask */ - -#define MPU_TYPE_SEPARATE_Pos 0U /*!< MPU TYPE: SEPARATE Position */ -#define MPU_TYPE_SEPARATE_Msk (1UL /*<< MPU_TYPE_SEPARATE_Pos*/) /*!< MPU TYPE: SEPARATE Mask */ - -/* MPU Control Register Definitions */ -#define MPU_CTRL_PRIVDEFENA_Pos 2U /*!< MPU CTRL: PRIVDEFENA Position */ -#define MPU_CTRL_PRIVDEFENA_Msk (1UL << MPU_CTRL_PRIVDEFENA_Pos) /*!< MPU CTRL: PRIVDEFENA Mask */ - -#define MPU_CTRL_HFNMIENA_Pos 1U /*!< MPU CTRL: HFNMIENA Position */ -#define MPU_CTRL_HFNMIENA_Msk (1UL << MPU_CTRL_HFNMIENA_Pos) /*!< MPU CTRL: HFNMIENA Mask */ - -#define MPU_CTRL_ENABLE_Pos 0U /*!< MPU CTRL: ENABLE Position */ -#define MPU_CTRL_ENABLE_Msk (1UL /*<< MPU_CTRL_ENABLE_Pos*/) /*!< MPU CTRL: ENABLE Mask */ - -/* MPU Region Number Register Definitions */ -#define MPU_RNR_REGION_Pos 0U /*!< MPU RNR: REGION Position */ -#define MPU_RNR_REGION_Msk (0xFFUL /*<< MPU_RNR_REGION_Pos*/) /*!< MPU RNR: REGION Mask */ - -/* MPU Region Base Address Register Definitions */ -#define MPU_RBAR_BASE_Pos 5U /*!< MPU RBAR: BASE Position */ -#define MPU_RBAR_BASE_Msk (0x7FFFFFFUL << MPU_RBAR_BASE_Pos) /*!< MPU RBAR: BASE Mask */ - -#define MPU_RBAR_SH_Pos 3U /*!< MPU RBAR: SH Position */ -#define MPU_RBAR_SH_Msk (0x3UL << MPU_RBAR_SH_Pos) /*!< MPU RBAR: SH Mask */ - -#define MPU_RBAR_AP_Pos 1U /*!< MPU RBAR: AP Position */ -#define MPU_RBAR_AP_Msk (0x3UL << MPU_RBAR_AP_Pos) /*!< MPU RBAR: AP Mask */ - -#define MPU_RBAR_XN_Pos 0U /*!< MPU RBAR: XN Position */ -#define MPU_RBAR_XN_Msk (01UL /*<< MPU_RBAR_XN_Pos*/) /*!< MPU RBAR: XN Mask */ - -/* MPU Region Limit Address Register Definitions */ -#define MPU_RLAR_LIMIT_Pos 5U /*!< MPU RLAR: LIMIT Position */ -#define MPU_RLAR_LIMIT_Msk (0x7FFFFFFUL << MPU_RLAR_LIMIT_Pos) /*!< MPU RLAR: LIMIT Mask */ - -#define MPU_RLAR_AttrIndx_Pos 1U /*!< MPU RLAR: AttrIndx Position */ -#define MPU_RLAR_AttrIndx_Msk (0x7UL << MPU_RLAR_AttrIndx_Pos) /*!< MPU RLAR: AttrIndx Mask */ - -#define MPU_RLAR_EN_Pos 0U /*!< MPU RLAR: Region enable bit Position */ -#define MPU_RLAR_EN_Msk (1UL /*<< MPU_RLAR_EN_Pos*/) /*!< MPU RLAR: Region enable bit Disable Mask */ - -/* MPU Memory Attribute Indirection Register 0 Definitions */ -#define MPU_MAIR0_Attr3_Pos 24U /*!< MPU MAIR0: Attr3 Position */ -#define MPU_MAIR0_Attr3_Msk (0xFFUL << MPU_MAIR0_Attr3_Pos) /*!< MPU MAIR0: Attr3 Mask */ - -#define MPU_MAIR0_Attr2_Pos 16U /*!< MPU MAIR0: Attr2 Position */ -#define MPU_MAIR0_Attr2_Msk (0xFFUL << MPU_MAIR0_Attr2_Pos) /*!< MPU MAIR0: Attr2 Mask */ - -#define MPU_MAIR0_Attr1_Pos 8U /*!< MPU MAIR0: Attr1 Position */ -#define MPU_MAIR0_Attr1_Msk (0xFFUL << MPU_MAIR0_Attr1_Pos) /*!< MPU MAIR0: Attr1 Mask */ - -#define MPU_MAIR0_Attr0_Pos 0U /*!< MPU MAIR0: Attr0 Position */ -#define MPU_MAIR0_Attr0_Msk (0xFFUL /*<< MPU_MAIR0_Attr0_Pos*/) /*!< MPU MAIR0: Attr0 Mask */ - -/* MPU Memory Attribute Indirection Register 1 Definitions */ -#define MPU_MAIR1_Attr7_Pos 24U /*!< MPU MAIR1: Attr7 Position */ -#define MPU_MAIR1_Attr7_Msk (0xFFUL << MPU_MAIR1_Attr7_Pos) /*!< MPU MAIR1: Attr7 Mask */ - -#define MPU_MAIR1_Attr6_Pos 16U /*!< MPU MAIR1: Attr6 Position */ -#define MPU_MAIR1_Attr6_Msk (0xFFUL << MPU_MAIR1_Attr6_Pos) /*!< MPU MAIR1: Attr6 Mask */ - -#define MPU_MAIR1_Attr5_Pos 8U /*!< MPU MAIR1: Attr5 Position */ -#define MPU_MAIR1_Attr5_Msk (0xFFUL << MPU_MAIR1_Attr5_Pos) /*!< MPU MAIR1: Attr5 Mask */ - -#define MPU_MAIR1_Attr4_Pos 0U /*!< MPU MAIR1: Attr4 Position */ -#define MPU_MAIR1_Attr4_Msk (0xFFUL /*<< MPU_MAIR1_Attr4_Pos*/) /*!< MPU MAIR1: Attr4 Mask */ - -/*@} end of group CMSIS_MPU */ -#endif - - -#if defined (__ARM_FEATURE_CMSE) && (__ARM_FEATURE_CMSE == 3U) -/** - \ingroup CMSIS_core_register - \defgroup CMSIS_SAU Security Attribution Unit (SAU) - \brief Type definitions for the Security Attribution Unit (SAU) - @{ - */ - -/** - \brief Structure type to access the Security Attribution Unit (SAU). - */ -typedef struct -{ - __IOM uint32_t CTRL; /*!< Offset: 0x000 (R/W) SAU Control Register */ - __IM uint32_t TYPE; /*!< Offset: 0x004 (R/ ) SAU Type Register */ -#if defined (__SAUREGION_PRESENT) && (__SAUREGION_PRESENT == 1U) - __IOM uint32_t RNR; /*!< Offset: 0x008 (R/W) SAU Region Number Register */ - __IOM uint32_t RBAR; /*!< Offset: 0x00C (R/W) SAU Region Base Address Register */ - __IOM uint32_t RLAR; /*!< Offset: 0x010 (R/W) SAU Region Limit Address Register */ -#else - uint32_t RESERVED0[3]; -#endif - __IOM uint32_t SFSR; /*!< Offset: 0x014 (R/W) Secure Fault Status Register */ - __IOM uint32_t SFAR; /*!< Offset: 0x018 (R/W) Secure Fault Address Register */ -} SAU_Type; - -/* SAU Control Register Definitions */ -#define SAU_CTRL_ALLNS_Pos 1U /*!< SAU CTRL: ALLNS Position */ -#define SAU_CTRL_ALLNS_Msk (1UL << SAU_CTRL_ALLNS_Pos) /*!< SAU CTRL: ALLNS Mask */ - -#define SAU_CTRL_ENABLE_Pos 0U /*!< SAU CTRL: ENABLE Position */ -#define SAU_CTRL_ENABLE_Msk (1UL /*<< SAU_CTRL_ENABLE_Pos*/) /*!< SAU CTRL: ENABLE Mask */ - -/* SAU Type Register Definitions */ -#define SAU_TYPE_SREGION_Pos 0U /*!< SAU TYPE: SREGION Position */ -#define SAU_TYPE_SREGION_Msk (0xFFUL /*<< SAU_TYPE_SREGION_Pos*/) /*!< SAU TYPE: SREGION Mask */ - -#if defined (__SAUREGION_PRESENT) && (__SAUREGION_PRESENT == 1U) -/* SAU Region Number Register Definitions */ -#define SAU_RNR_REGION_Pos 0U /*!< SAU RNR: REGION Position */ -#define SAU_RNR_REGION_Msk (0xFFUL /*<< SAU_RNR_REGION_Pos*/) /*!< SAU RNR: REGION Mask */ - -/* SAU Region Base Address Register Definitions */ -#define SAU_RBAR_BADDR_Pos 5U /*!< SAU RBAR: BADDR Position */ -#define SAU_RBAR_BADDR_Msk (0x7FFFFFFUL << SAU_RBAR_BADDR_Pos) /*!< SAU RBAR: BADDR Mask */ - -/* SAU Region Limit Address Register Definitions */ -#define SAU_RLAR_LADDR_Pos 5U /*!< SAU RLAR: LADDR Position */ -#define SAU_RLAR_LADDR_Msk (0x7FFFFFFUL << SAU_RLAR_LADDR_Pos) /*!< SAU RLAR: LADDR Mask */ - -#define SAU_RLAR_NSC_Pos 1U /*!< SAU RLAR: NSC Position */ -#define SAU_RLAR_NSC_Msk (1UL << SAU_RLAR_NSC_Pos) /*!< SAU RLAR: NSC Mask */ - -#define SAU_RLAR_ENABLE_Pos 0U /*!< SAU RLAR: ENABLE Position */ -#define SAU_RLAR_ENABLE_Msk (1UL /*<< SAU_RLAR_ENABLE_Pos*/) /*!< SAU RLAR: ENABLE Mask */ - -#endif /* defined (__SAUREGION_PRESENT) && (__SAUREGION_PRESENT == 1U) */ - -/* Secure Fault Status Register Definitions */ -#define SAU_SFSR_LSERR_Pos 7U /*!< SAU SFSR: LSERR Position */ -#define SAU_SFSR_LSERR_Msk (1UL << SAU_SFSR_LSERR_Pos) /*!< SAU SFSR: LSERR Mask */ - -#define SAU_SFSR_SFARVALID_Pos 6U /*!< SAU SFSR: SFARVALID Position */ -#define SAU_SFSR_SFARVALID_Msk (1UL << SAU_SFSR_SFARVALID_Pos) /*!< SAU SFSR: SFARVALID Mask */ - -#define SAU_SFSR_LSPERR_Pos 5U /*!< SAU SFSR: LSPERR Position */ -#define SAU_SFSR_LSPERR_Msk (1UL << SAU_SFSR_LSPERR_Pos) /*!< SAU SFSR: LSPERR Mask */ - -#define SAU_SFSR_INVTRAN_Pos 4U /*!< SAU SFSR: INVTRAN Position */ -#define SAU_SFSR_INVTRAN_Msk (1UL << SAU_SFSR_INVTRAN_Pos) /*!< SAU SFSR: INVTRAN Mask */ - -#define SAU_SFSR_AUVIOL_Pos 3U /*!< SAU SFSR: AUVIOL Position */ -#define SAU_SFSR_AUVIOL_Msk (1UL << SAU_SFSR_AUVIOL_Pos) /*!< SAU SFSR: AUVIOL Mask */ - -#define SAU_SFSR_INVER_Pos 2U /*!< SAU SFSR: INVER Position */ -#define SAU_SFSR_INVER_Msk (1UL << SAU_SFSR_INVER_Pos) /*!< SAU SFSR: INVER Mask */ - -#define SAU_SFSR_INVIS_Pos 1U /*!< SAU SFSR: INVIS Position */ -#define SAU_SFSR_INVIS_Msk (1UL << SAU_SFSR_INVIS_Pos) /*!< SAU SFSR: INVIS Mask */ - -#define SAU_SFSR_INVEP_Pos 0U /*!< SAU SFSR: INVEP Position */ -#define SAU_SFSR_INVEP_Msk (1UL /*<< SAU_SFSR_INVEP_Pos*/) /*!< SAU SFSR: INVEP Mask */ - -/*@} end of group CMSIS_SAU */ -#endif /* defined (__ARM_FEATURE_CMSE) && (__ARM_FEATURE_CMSE == 3U) */ - - -/** - \ingroup CMSIS_core_register - \defgroup CMSIS_FPU Floating Point Unit (FPU) - \brief Type definitions for the Floating Point Unit (FPU) - @{ - */ - -/** - \brief Structure type to access the Floating Point Unit (FPU). - */ -typedef struct -{ - uint32_t RESERVED0[1U]; - __IOM uint32_t FPCCR; /*!< Offset: 0x004 (R/W) Floating-Point Context Control Register */ - __IOM uint32_t FPCAR; /*!< Offset: 0x008 (R/W) Floating-Point Context Address Register */ - __IOM uint32_t FPDSCR; /*!< Offset: 0x00C (R/W) Floating-Point Default Status Control Register */ - __IM uint32_t MVFR0; /*!< Offset: 0x010 (R/ ) Media and FP Feature Register 0 */ - __IM uint32_t MVFR1; /*!< Offset: 0x014 (R/ ) Media and FP Feature Register 1 */ -} FPU_Type; - -/* Floating-Point Context Control Register Definitions */ -#define FPU_FPCCR_ASPEN_Pos 31U /*!< FPCCR: ASPEN bit Position */ -#define FPU_FPCCR_ASPEN_Msk (1UL << FPU_FPCCR_ASPEN_Pos) /*!< FPCCR: ASPEN bit Mask */ - -#define FPU_FPCCR_LSPEN_Pos 30U /*!< FPCCR: LSPEN Position */ -#define FPU_FPCCR_LSPEN_Msk (1UL << FPU_FPCCR_LSPEN_Pos) /*!< FPCCR: LSPEN bit Mask */ - -#define FPU_FPCCR_LSPENS_Pos 29U /*!< FPCCR: LSPENS Position */ -#define FPU_FPCCR_LSPENS_Msk (1UL << FPU_FPCCR_LSPENS_Pos) /*!< FPCCR: LSPENS bit Mask */ - -#define FPU_FPCCR_CLRONRET_Pos 28U /*!< FPCCR: CLRONRET Position */ -#define FPU_FPCCR_CLRONRET_Msk (1UL << FPU_FPCCR_CLRONRET_Pos) /*!< FPCCR: CLRONRET bit Mask */ - -#define FPU_FPCCR_CLRONRETS_Pos 27U /*!< FPCCR: CLRONRETS Position */ -#define FPU_FPCCR_CLRONRETS_Msk (1UL << FPU_FPCCR_CLRONRETS_Pos) /*!< FPCCR: CLRONRETS bit Mask */ - -#define FPU_FPCCR_TS_Pos 26U /*!< FPCCR: TS Position */ -#define FPU_FPCCR_TS_Msk (1UL << FPU_FPCCR_TS_Pos) /*!< FPCCR: TS bit Mask */ - -#define FPU_FPCCR_UFRDY_Pos 10U /*!< FPCCR: UFRDY Position */ -#define FPU_FPCCR_UFRDY_Msk (1UL << FPU_FPCCR_UFRDY_Pos) /*!< FPCCR: UFRDY bit Mask */ - -#define FPU_FPCCR_SPLIMVIOL_Pos 9U /*!< FPCCR: SPLIMVIOL Position */ -#define FPU_FPCCR_SPLIMVIOL_Msk (1UL << FPU_FPCCR_SPLIMVIOL_Pos) /*!< FPCCR: SPLIMVIOL bit Mask */ - -#define FPU_FPCCR_MONRDY_Pos 8U /*!< FPCCR: MONRDY Position */ -#define FPU_FPCCR_MONRDY_Msk (1UL << FPU_FPCCR_MONRDY_Pos) /*!< FPCCR: MONRDY bit Mask */ - -#define FPU_FPCCR_SFRDY_Pos 7U /*!< FPCCR: SFRDY Position */ -#define FPU_FPCCR_SFRDY_Msk (1UL << FPU_FPCCR_SFRDY_Pos) /*!< FPCCR: SFRDY bit Mask */ - -#define FPU_FPCCR_BFRDY_Pos 6U /*!< FPCCR: BFRDY Position */ -#define FPU_FPCCR_BFRDY_Msk (1UL << FPU_FPCCR_BFRDY_Pos) /*!< FPCCR: BFRDY bit Mask */ - -#define FPU_FPCCR_MMRDY_Pos 5U /*!< FPCCR: MMRDY Position */ -#define FPU_FPCCR_MMRDY_Msk (1UL << FPU_FPCCR_MMRDY_Pos) /*!< FPCCR: MMRDY bit Mask */ - -#define FPU_FPCCR_HFRDY_Pos 4U /*!< FPCCR: HFRDY Position */ -#define FPU_FPCCR_HFRDY_Msk (1UL << FPU_FPCCR_HFRDY_Pos) /*!< FPCCR: HFRDY bit Mask */ - -#define FPU_FPCCR_THREAD_Pos 3U /*!< FPCCR: processor mode bit Position */ -#define FPU_FPCCR_THREAD_Msk (1UL << FPU_FPCCR_THREAD_Pos) /*!< FPCCR: processor mode active bit Mask */ - -#define FPU_FPCCR_S_Pos 2U /*!< FPCCR: Security status of the FP context bit Position */ -#define FPU_FPCCR_S_Msk (1UL << FPU_FPCCR_S_Pos) /*!< FPCCR: Security status of the FP context bit Mask */ - -#define FPU_FPCCR_USER_Pos 1U /*!< FPCCR: privilege level bit Position */ -#define FPU_FPCCR_USER_Msk (1UL << FPU_FPCCR_USER_Pos) /*!< FPCCR: privilege level bit Mask */ - -#define FPU_FPCCR_LSPACT_Pos 0U /*!< FPCCR: Lazy state preservation active bit Position */ -#define FPU_FPCCR_LSPACT_Msk (1UL /*<< FPU_FPCCR_LSPACT_Pos*/) /*!< FPCCR: Lazy state preservation active bit Mask */ - -/* Floating-Point Context Address Register Definitions */ -#define FPU_FPCAR_ADDRESS_Pos 3U /*!< FPCAR: ADDRESS bit Position */ -#define FPU_FPCAR_ADDRESS_Msk (0x1FFFFFFFUL << FPU_FPCAR_ADDRESS_Pos) /*!< FPCAR: ADDRESS bit Mask */ - -/* Floating-Point Default Status Control Register Definitions */ -#define FPU_FPDSCR_AHP_Pos 26U /*!< FPDSCR: AHP bit Position */ -#define FPU_FPDSCR_AHP_Msk (1UL << FPU_FPDSCR_AHP_Pos) /*!< FPDSCR: AHP bit Mask */ - -#define FPU_FPDSCR_DN_Pos 25U /*!< FPDSCR: DN bit Position */ -#define FPU_FPDSCR_DN_Msk (1UL << FPU_FPDSCR_DN_Pos) /*!< FPDSCR: DN bit Mask */ - -#define FPU_FPDSCR_FZ_Pos 24U /*!< FPDSCR: FZ bit Position */ -#define FPU_FPDSCR_FZ_Msk (1UL << FPU_FPDSCR_FZ_Pos) /*!< FPDSCR: FZ bit Mask */ - -#define FPU_FPDSCR_RMode_Pos 22U /*!< FPDSCR: RMode bit Position */ -#define FPU_FPDSCR_RMode_Msk (3UL << FPU_FPDSCR_RMode_Pos) /*!< FPDSCR: RMode bit Mask */ - -/* Media and FP Feature Register 0 Definitions */ -#define FPU_MVFR0_FP_rounding_modes_Pos 28U /*!< MVFR0: FP rounding modes bits Position */ -#define FPU_MVFR0_FP_rounding_modes_Msk (0xFUL << FPU_MVFR0_FP_rounding_modes_Pos) /*!< MVFR0: FP rounding modes bits Mask */ - -#define FPU_MVFR0_Short_vectors_Pos 24U /*!< MVFR0: Short vectors bits Position */ -#define FPU_MVFR0_Short_vectors_Msk (0xFUL << FPU_MVFR0_Short_vectors_Pos) /*!< MVFR0: Short vectors bits Mask */ - -#define FPU_MVFR0_Square_root_Pos 20U /*!< MVFR0: Square root bits Position */ -#define FPU_MVFR0_Square_root_Msk (0xFUL << FPU_MVFR0_Square_root_Pos) /*!< MVFR0: Square root bits Mask */ - -#define FPU_MVFR0_Divide_Pos 16U /*!< MVFR0: Divide bits Position */ -#define FPU_MVFR0_Divide_Msk (0xFUL << FPU_MVFR0_Divide_Pos) /*!< MVFR0: Divide bits Mask */ - -#define FPU_MVFR0_FP_excep_trapping_Pos 12U /*!< MVFR0: FP exception trapping bits Position */ -#define FPU_MVFR0_FP_excep_trapping_Msk (0xFUL << FPU_MVFR0_FP_excep_trapping_Pos) /*!< MVFR0: FP exception trapping bits Mask */ - -#define FPU_MVFR0_Double_precision_Pos 8U /*!< MVFR0: Double-precision bits Position */ -#define FPU_MVFR0_Double_precision_Msk (0xFUL << FPU_MVFR0_Double_precision_Pos) /*!< MVFR0: Double-precision bits Mask */ - -#define FPU_MVFR0_Single_precision_Pos 4U /*!< MVFR0: Single-precision bits Position */ -#define FPU_MVFR0_Single_precision_Msk (0xFUL << FPU_MVFR0_Single_precision_Pos) /*!< MVFR0: Single-precision bits Mask */ - -#define FPU_MVFR0_A_SIMD_registers_Pos 0U /*!< MVFR0: A_SIMD registers bits Position */ -#define FPU_MVFR0_A_SIMD_registers_Msk (0xFUL /*<< FPU_MVFR0_A_SIMD_registers_Pos*/) /*!< MVFR0: A_SIMD registers bits Mask */ - -/* Media and FP Feature Register 1 Definitions */ -#define FPU_MVFR1_FP_fused_MAC_Pos 28U /*!< MVFR1: FP fused MAC bits Position */ -#define FPU_MVFR1_FP_fused_MAC_Msk (0xFUL << FPU_MVFR1_FP_fused_MAC_Pos) /*!< MVFR1: FP fused MAC bits Mask */ - -#define FPU_MVFR1_FP_HPFP_Pos 24U /*!< MVFR1: FP HPFP bits Position */ -#define FPU_MVFR1_FP_HPFP_Msk (0xFUL << FPU_MVFR1_FP_HPFP_Pos) /*!< MVFR1: FP HPFP bits Mask */ - -#define FPU_MVFR1_D_NaN_mode_Pos 4U /*!< MVFR1: D_NaN mode bits Position */ -#define FPU_MVFR1_D_NaN_mode_Msk (0xFUL << FPU_MVFR1_D_NaN_mode_Pos) /*!< MVFR1: D_NaN mode bits Mask */ - -#define FPU_MVFR1_FtZ_mode_Pos 0U /*!< MVFR1: FtZ mode bits Position */ -#define FPU_MVFR1_FtZ_mode_Msk (0xFUL /*<< FPU_MVFR1_FtZ_mode_Pos*/) /*!< MVFR1: FtZ mode bits Mask */ - -/*@} end of group CMSIS_FPU */ - - -/** - \ingroup CMSIS_core_register - \defgroup CMSIS_CoreDebug Core Debug Registers (CoreDebug) - \brief Type definitions for the Core Debug Registers - @{ - */ - -/** - \brief Structure type to access the Core Debug Register (CoreDebug). - */ -typedef struct -{ - __IOM uint32_t DHCSR; /*!< Offset: 0x000 (R/W) Debug Halting Control and Status Register */ - __OM uint32_t DCRSR; /*!< Offset: 0x004 ( /W) Debug Core Register Selector Register */ - __IOM uint32_t DCRDR; /*!< Offset: 0x008 (R/W) Debug Core Register Data Register */ - __IOM uint32_t DEMCR; /*!< Offset: 0x00C (R/W) Debug Exception and Monitor Control Register */ - uint32_t RESERVED4[1U]; - __IOM uint32_t DAUTHCTRL; /*!< Offset: 0x014 (R/W) Debug Authentication Control Register */ - __IOM uint32_t DSCSR; /*!< Offset: 0x018 (R/W) Debug Security Control and Status Register */ -} CoreDebug_Type; - -/* Debug Halting Control and Status Register Definitions */ -#define CoreDebug_DHCSR_DBGKEY_Pos 16U /*!< CoreDebug DHCSR: DBGKEY Position */ -#define CoreDebug_DHCSR_DBGKEY_Msk (0xFFFFUL << CoreDebug_DHCSR_DBGKEY_Pos) /*!< CoreDebug DHCSR: DBGKEY Mask */ - -#define CoreDebug_DHCSR_S_RESTART_ST_Pos 26U /*!< CoreDebug DHCSR: S_RESTART_ST Position */ -#define CoreDebug_DHCSR_S_RESTART_ST_Msk (1UL << CoreDebug_DHCSR_S_RESTART_ST_Pos) /*!< CoreDebug DHCSR: S_RESTART_ST Mask */ - -#define CoreDebug_DHCSR_S_RESET_ST_Pos 25U /*!< CoreDebug DHCSR: S_RESET_ST Position */ -#define CoreDebug_DHCSR_S_RESET_ST_Msk (1UL << CoreDebug_DHCSR_S_RESET_ST_Pos) /*!< CoreDebug DHCSR: S_RESET_ST Mask */ - -#define CoreDebug_DHCSR_S_RETIRE_ST_Pos 24U /*!< CoreDebug DHCSR: S_RETIRE_ST Position */ -#define CoreDebug_DHCSR_S_RETIRE_ST_Msk (1UL << CoreDebug_DHCSR_S_RETIRE_ST_Pos) /*!< CoreDebug DHCSR: S_RETIRE_ST Mask */ - -#define CoreDebug_DHCSR_S_LOCKUP_Pos 19U /*!< CoreDebug DHCSR: S_LOCKUP Position */ -#define CoreDebug_DHCSR_S_LOCKUP_Msk (1UL << CoreDebug_DHCSR_S_LOCKUP_Pos) /*!< CoreDebug DHCSR: S_LOCKUP Mask */ - -#define CoreDebug_DHCSR_S_SLEEP_Pos 18U /*!< CoreDebug DHCSR: S_SLEEP Position */ -#define CoreDebug_DHCSR_S_SLEEP_Msk (1UL << CoreDebug_DHCSR_S_SLEEP_Pos) /*!< CoreDebug DHCSR: S_SLEEP Mask */ - -#define CoreDebug_DHCSR_S_HALT_Pos 17U /*!< CoreDebug DHCSR: S_HALT Position */ -#define CoreDebug_DHCSR_S_HALT_Msk (1UL << CoreDebug_DHCSR_S_HALT_Pos) /*!< CoreDebug DHCSR: S_HALT Mask */ - -#define CoreDebug_DHCSR_S_REGRDY_Pos 16U /*!< CoreDebug DHCSR: S_REGRDY Position */ -#define CoreDebug_DHCSR_S_REGRDY_Msk (1UL << CoreDebug_DHCSR_S_REGRDY_Pos) /*!< CoreDebug DHCSR: S_REGRDY Mask */ - -#define CoreDebug_DHCSR_C_SNAPSTALL_Pos 5U /*!< CoreDebug DHCSR: C_SNAPSTALL Position */ -#define CoreDebug_DHCSR_C_SNAPSTALL_Msk (1UL << CoreDebug_DHCSR_C_SNAPSTALL_Pos) /*!< CoreDebug DHCSR: C_SNAPSTALL Mask */ - -#define CoreDebug_DHCSR_C_MASKINTS_Pos 3U /*!< CoreDebug DHCSR: C_MASKINTS Position */ -#define CoreDebug_DHCSR_C_MASKINTS_Msk (1UL << CoreDebug_DHCSR_C_MASKINTS_Pos) /*!< CoreDebug DHCSR: C_MASKINTS Mask */ - -#define CoreDebug_DHCSR_C_STEP_Pos 2U /*!< CoreDebug DHCSR: C_STEP Position */ -#define CoreDebug_DHCSR_C_STEP_Msk (1UL << CoreDebug_DHCSR_C_STEP_Pos) /*!< CoreDebug DHCSR: C_STEP Mask */ - -#define CoreDebug_DHCSR_C_HALT_Pos 1U /*!< CoreDebug DHCSR: C_HALT Position */ -#define CoreDebug_DHCSR_C_HALT_Msk (1UL << CoreDebug_DHCSR_C_HALT_Pos) /*!< CoreDebug DHCSR: C_HALT Mask */ - -#define CoreDebug_DHCSR_C_DEBUGEN_Pos 0U /*!< CoreDebug DHCSR: C_DEBUGEN Position */ -#define CoreDebug_DHCSR_C_DEBUGEN_Msk (1UL /*<< CoreDebug_DHCSR_C_DEBUGEN_Pos*/) /*!< CoreDebug DHCSR: C_DEBUGEN Mask */ - -/* Debug Core Register Selector Register Definitions */ -#define CoreDebug_DCRSR_REGWnR_Pos 16U /*!< CoreDebug DCRSR: REGWnR Position */ -#define CoreDebug_DCRSR_REGWnR_Msk (1UL << CoreDebug_DCRSR_REGWnR_Pos) /*!< CoreDebug DCRSR: REGWnR Mask */ - -#define CoreDebug_DCRSR_REGSEL_Pos 0U /*!< CoreDebug DCRSR: REGSEL Position */ -#define CoreDebug_DCRSR_REGSEL_Msk (0x1FUL /*<< CoreDebug_DCRSR_REGSEL_Pos*/) /*!< CoreDebug DCRSR: REGSEL Mask */ - -/* Debug Exception and Monitor Control Register Definitions */ -#define CoreDebug_DEMCR_TRCENA_Pos 24U /*!< CoreDebug DEMCR: TRCENA Position */ -#define CoreDebug_DEMCR_TRCENA_Msk (1UL << CoreDebug_DEMCR_TRCENA_Pos) /*!< CoreDebug DEMCR: TRCENA Mask */ - -#define CoreDebug_DEMCR_MON_REQ_Pos 19U /*!< CoreDebug DEMCR: MON_REQ Position */ -#define CoreDebug_DEMCR_MON_REQ_Msk (1UL << CoreDebug_DEMCR_MON_REQ_Pos) /*!< CoreDebug DEMCR: MON_REQ Mask */ - -#define CoreDebug_DEMCR_MON_STEP_Pos 18U /*!< CoreDebug DEMCR: MON_STEP Position */ -#define CoreDebug_DEMCR_MON_STEP_Msk (1UL << CoreDebug_DEMCR_MON_STEP_Pos) /*!< CoreDebug DEMCR: MON_STEP Mask */ - -#define CoreDebug_DEMCR_MON_PEND_Pos 17U /*!< CoreDebug DEMCR: MON_PEND Position */ -#define CoreDebug_DEMCR_MON_PEND_Msk (1UL << CoreDebug_DEMCR_MON_PEND_Pos) /*!< CoreDebug DEMCR: MON_PEND Mask */ - -#define CoreDebug_DEMCR_MON_EN_Pos 16U /*!< CoreDebug DEMCR: MON_EN Position */ -#define CoreDebug_DEMCR_MON_EN_Msk (1UL << CoreDebug_DEMCR_MON_EN_Pos) /*!< CoreDebug DEMCR: MON_EN Mask */ - -#define CoreDebug_DEMCR_VC_HARDERR_Pos 10U /*!< CoreDebug DEMCR: VC_HARDERR Position */ -#define CoreDebug_DEMCR_VC_HARDERR_Msk (1UL << CoreDebug_DEMCR_VC_HARDERR_Pos) /*!< CoreDebug DEMCR: VC_HARDERR Mask */ - -#define CoreDebug_DEMCR_VC_INTERR_Pos 9U /*!< CoreDebug DEMCR: VC_INTERR Position */ -#define CoreDebug_DEMCR_VC_INTERR_Msk (1UL << CoreDebug_DEMCR_VC_INTERR_Pos) /*!< CoreDebug DEMCR: VC_INTERR Mask */ - -#define CoreDebug_DEMCR_VC_BUSERR_Pos 8U /*!< CoreDebug DEMCR: VC_BUSERR Position */ -#define CoreDebug_DEMCR_VC_BUSERR_Msk (1UL << CoreDebug_DEMCR_VC_BUSERR_Pos) /*!< CoreDebug DEMCR: VC_BUSERR Mask */ - -#define CoreDebug_DEMCR_VC_STATERR_Pos 7U /*!< CoreDebug DEMCR: VC_STATERR Position */ -#define CoreDebug_DEMCR_VC_STATERR_Msk (1UL << CoreDebug_DEMCR_VC_STATERR_Pos) /*!< CoreDebug DEMCR: VC_STATERR Mask */ - -#define CoreDebug_DEMCR_VC_CHKERR_Pos 6U /*!< CoreDebug DEMCR: VC_CHKERR Position */ -#define CoreDebug_DEMCR_VC_CHKERR_Msk (1UL << CoreDebug_DEMCR_VC_CHKERR_Pos) /*!< CoreDebug DEMCR: VC_CHKERR Mask */ - -#define CoreDebug_DEMCR_VC_NOCPERR_Pos 5U /*!< CoreDebug DEMCR: VC_NOCPERR Position */ -#define CoreDebug_DEMCR_VC_NOCPERR_Msk (1UL << CoreDebug_DEMCR_VC_NOCPERR_Pos) /*!< CoreDebug DEMCR: VC_NOCPERR Mask */ - -#define CoreDebug_DEMCR_VC_MMERR_Pos 4U /*!< CoreDebug DEMCR: VC_MMERR Position */ -#define CoreDebug_DEMCR_VC_MMERR_Msk (1UL << CoreDebug_DEMCR_VC_MMERR_Pos) /*!< CoreDebug DEMCR: VC_MMERR Mask */ - -#define CoreDebug_DEMCR_VC_CORERESET_Pos 0U /*!< CoreDebug DEMCR: VC_CORERESET Position */ -#define CoreDebug_DEMCR_VC_CORERESET_Msk (1UL /*<< CoreDebug_DEMCR_VC_CORERESET_Pos*/) /*!< CoreDebug DEMCR: VC_CORERESET Mask */ - -/* Debug Authentication Control Register Definitions */ -#define CoreDebug_DAUTHCTRL_INTSPNIDEN_Pos 3U /*!< CoreDebug DAUTHCTRL: INTSPNIDEN, Position */ -#define CoreDebug_DAUTHCTRL_INTSPNIDEN_Msk (1UL << CoreDebug_DAUTHCTRL_INTSPNIDEN_Pos) /*!< CoreDebug DAUTHCTRL: INTSPNIDEN, Mask */ - -#define CoreDebug_DAUTHCTRL_SPNIDENSEL_Pos 2U /*!< CoreDebug DAUTHCTRL: SPNIDENSEL Position */ -#define CoreDebug_DAUTHCTRL_SPNIDENSEL_Msk (1UL << CoreDebug_DAUTHCTRL_SPNIDENSEL_Pos) /*!< CoreDebug DAUTHCTRL: SPNIDENSEL Mask */ - -#define CoreDebug_DAUTHCTRL_INTSPIDEN_Pos 1U /*!< CoreDebug DAUTHCTRL: INTSPIDEN Position */ -#define CoreDebug_DAUTHCTRL_INTSPIDEN_Msk (1UL << CoreDebug_DAUTHCTRL_INTSPIDEN_Pos) /*!< CoreDebug DAUTHCTRL: INTSPIDEN Mask */ - -#define CoreDebug_DAUTHCTRL_SPIDENSEL_Pos 0U /*!< CoreDebug DAUTHCTRL: SPIDENSEL Position */ -#define CoreDebug_DAUTHCTRL_SPIDENSEL_Msk (1UL /*<< CoreDebug_DAUTHCTRL_SPIDENSEL_Pos*/) /*!< CoreDebug DAUTHCTRL: SPIDENSEL Mask */ - -/* Debug Security Control and Status Register Definitions */ -#define CoreDebug_DSCSR_CDS_Pos 16U /*!< CoreDebug DSCSR: CDS Position */ -#define CoreDebug_DSCSR_CDS_Msk (1UL << CoreDebug_DSCSR_CDS_Pos) /*!< CoreDebug DSCSR: CDS Mask */ - -#define CoreDebug_DSCSR_SBRSEL_Pos 1U /*!< CoreDebug DSCSR: SBRSEL Position */ -#define CoreDebug_DSCSR_SBRSEL_Msk (1UL << CoreDebug_DSCSR_SBRSEL_Pos) /*!< CoreDebug DSCSR: SBRSEL Mask */ - -#define CoreDebug_DSCSR_SBRSELEN_Pos 0U /*!< CoreDebug DSCSR: SBRSELEN Position */ -#define CoreDebug_DSCSR_SBRSELEN_Msk (1UL /*<< CoreDebug_DSCSR_SBRSELEN_Pos*/) /*!< CoreDebug DSCSR: SBRSELEN Mask */ - -/*@} end of group CMSIS_CoreDebug */ - - -/** - \ingroup CMSIS_core_register - \defgroup CMSIS_core_bitfield Core register bit field macros - \brief Macros for use with bit field definitions (xxx_Pos, xxx_Msk). - @{ - */ - -/** - \brief Mask and shift a bit field value for use in a register bit range. - \param[in] field Name of the register bit field. - \param[in] value Value of the bit field. This parameter is interpreted as an uint32_t type. - \return Masked and shifted value. -*/ -#define _VAL2FLD(field, value) (((uint32_t)(value) << field ## _Pos) & field ## _Msk) - -/** - \brief Mask and shift a register value to extract a bit filed value. - \param[in] field Name of the register bit field. - \param[in] value Value of register. This parameter is interpreted as an uint32_t type. - \return Masked and shifted bit field value. -*/ -#define _FLD2VAL(field, value) (((uint32_t)(value) & field ## _Msk) >> field ## _Pos) - -/*@} end of group CMSIS_core_bitfield */ - - -/** - \ingroup CMSIS_core_register - \defgroup CMSIS_core_base Core Definitions - \brief Definitions for base addresses, unions, and structures. - @{ - */ - -/* Memory mapping of Core Hardware */ - #define SCS_BASE (0xE000E000UL) /*!< System Control Space Base Address */ - #define ITM_BASE (0xE0000000UL) /*!< ITM Base Address */ - #define DWT_BASE (0xE0001000UL) /*!< DWT Base Address */ - #define TPI_BASE (0xE0040000UL) /*!< TPI Base Address */ - #define CoreDebug_BASE (0xE000EDF0UL) /*!< Core Debug Base Address */ - #define SysTick_BASE (SCS_BASE + 0x0010UL) /*!< SysTick Base Address */ - #define NVIC_BASE (SCS_BASE + 0x0100UL) /*!< NVIC Base Address */ - #define SCB_BASE (SCS_BASE + 0x0D00UL) /*!< System Control Block Base Address */ - - #define SCnSCB ((SCnSCB_Type *) SCS_BASE ) /*!< System control Register not in SCB */ - #define SCB ((SCB_Type *) SCB_BASE ) /*!< SCB configuration struct */ - #define SysTick ((SysTick_Type *) SysTick_BASE ) /*!< SysTick configuration struct */ - #define NVIC ((NVIC_Type *) NVIC_BASE ) /*!< NVIC configuration struct */ - #define ITM ((ITM_Type *) ITM_BASE ) /*!< ITM configuration struct */ - #define DWT ((DWT_Type *) DWT_BASE ) /*!< DWT configuration struct */ - #define TPI ((TPI_Type *) TPI_BASE ) /*!< TPI configuration struct */ - #define CoreDebug ((CoreDebug_Type *) CoreDebug_BASE ) /*!< Core Debug configuration struct */ - - #if defined (__MPU_PRESENT) && (__MPU_PRESENT == 1U) - #define MPU_BASE (SCS_BASE + 0x0D90UL) /*!< Memory Protection Unit */ - #define MPU ((MPU_Type *) MPU_BASE ) /*!< Memory Protection Unit */ - #endif - - #if defined (__ARM_FEATURE_CMSE) && (__ARM_FEATURE_CMSE == 3U) - #define SAU_BASE (SCS_BASE + 0x0DD0UL) /*!< Security Attribution Unit */ - #define SAU ((SAU_Type *) SAU_BASE ) /*!< Security Attribution Unit */ - #endif - - #define FPU_BASE (SCS_BASE + 0x0F30UL) /*!< Floating Point Unit */ - #define FPU ((FPU_Type *) FPU_BASE ) /*!< Floating Point Unit */ - -#if defined (__ARM_FEATURE_CMSE) && (__ARM_FEATURE_CMSE == 3U) - #define SCS_BASE_NS (0xE002E000UL) /*!< System Control Space Base Address (non-secure address space) */ - #define CoreDebug_BASE_NS (0xE002EDF0UL) /*!< Core Debug Base Address (non-secure address space) */ - #define SysTick_BASE_NS (SCS_BASE_NS + 0x0010UL) /*!< SysTick Base Address (non-secure address space) */ - #define NVIC_BASE_NS (SCS_BASE_NS + 0x0100UL) /*!< NVIC Base Address (non-secure address space) */ - #define SCB_BASE_NS (SCS_BASE_NS + 0x0D00UL) /*!< System Control Block Base Address (non-secure address space) */ - - #define SCnSCB_NS ((SCnSCB_Type *) SCS_BASE_NS ) /*!< System control Register not in SCB(non-secure address space) */ - #define SCB_NS ((SCB_Type *) SCB_BASE_NS ) /*!< SCB configuration struct (non-secure address space) */ - #define SysTick_NS ((SysTick_Type *) SysTick_BASE_NS ) /*!< SysTick configuration struct (non-secure address space) */ - #define NVIC_NS ((NVIC_Type *) NVIC_BASE_NS ) /*!< NVIC configuration struct (non-secure address space) */ - #define CoreDebug_NS ((CoreDebug_Type *) CoreDebug_BASE_NS) /*!< Core Debug configuration struct (non-secure address space) */ - - #if defined (__MPU_PRESENT) && (__MPU_PRESENT == 1U) - #define MPU_BASE_NS (SCS_BASE_NS + 0x0D90UL) /*!< Memory Protection Unit (non-secure address space) */ - #define MPU_NS ((MPU_Type *) MPU_BASE_NS ) /*!< Memory Protection Unit (non-secure address space) */ - #endif - - #define FPU_BASE_NS (SCS_BASE_NS + 0x0F30UL) /*!< Floating Point Unit (non-secure address space) */ - #define FPU_NS ((FPU_Type *) FPU_BASE_NS ) /*!< Floating Point Unit (non-secure address space) */ - -#endif /* defined (__ARM_FEATURE_CMSE) && (__ARM_FEATURE_CMSE == 3U) */ -/*@} */ - - - -/******************************************************************************* - * Hardware Abstraction Layer - Core Function Interface contains: - - Core NVIC Functions - - Core SysTick Functions - - Core Debug Functions - - Core Register Access Functions - ******************************************************************************/ -/** - \defgroup CMSIS_Core_FunctionInterface Functions and Instructions Reference -*/ - - - -/* ########################## NVIC functions #################################### */ -/** - \ingroup CMSIS_Core_FunctionInterface - \defgroup CMSIS_Core_NVICFunctions NVIC Functions - \brief Functions that manage interrupts and exceptions via the NVIC. - @{ - */ - -#ifdef CMSIS_NVIC_VIRTUAL - #ifndef CMSIS_NVIC_VIRTUAL_HEADER_FILE - #define CMSIS_NVIC_VIRTUAL_HEADER_FILE "cmsis_nvic_virtual.h" - #endif - #include CMSIS_NVIC_VIRTUAL_HEADER_FILE -#else - #define NVIC_SetPriorityGrouping __NVIC_SetPriorityGrouping - #define NVIC_GetPriorityGrouping __NVIC_GetPriorityGrouping - #define NVIC_EnableIRQ __NVIC_EnableIRQ - #define NVIC_GetEnableIRQ __NVIC_GetEnableIRQ - #define NVIC_DisableIRQ __NVIC_DisableIRQ - #define NVIC_GetPendingIRQ __NVIC_GetPendingIRQ - #define NVIC_SetPendingIRQ __NVIC_SetPendingIRQ - #define NVIC_ClearPendingIRQ __NVIC_ClearPendingIRQ - #define NVIC_GetActive __NVIC_GetActive - #define NVIC_SetPriority __NVIC_SetPriority - #define NVIC_GetPriority __NVIC_GetPriority - #define NVIC_SystemReset __NVIC_SystemReset -#endif /* CMSIS_NVIC_VIRTUAL */ - -#ifdef CMSIS_VECTAB_VIRTUAL - #ifndef CMSIS_VECTAB_VIRTUAL_HEADER_FILE - #define CMSIS_VECTAB_VIRTUAL_HEADER_FILE "cmsis_vectab_virtual.h" - #endif - #include CMSIS_VECTAB_VIRTUAL_HEADER_FILE -#else - #define NVIC_SetVector __NVIC_SetVector - #define NVIC_GetVector __NVIC_GetVector -#endif /* (CMSIS_VECTAB_VIRTUAL) */ - -#define NVIC_USER_IRQ_OFFSET 16 - - -/* Special LR values for Secure/Non-Secure call handling and exception handling */ - -/* Function Return Payload (from ARMv8-M Architecture Reference Manual) LR value on entry from Secure BLXNS */ -#define FNC_RETURN (0xFEFFFFFFUL) /* bit [0] ignored when processing a branch */ - -/* The following EXC_RETURN mask values are used to evaluate the LR on exception entry */ -#define EXC_RETURN_PREFIX (0xFF000000UL) /* bits [31:24] set to indicate an EXC_RETURN value */ -#define EXC_RETURN_S (0x00000040UL) /* bit [6] stack used to push registers: 0=Non-secure 1=Secure */ -#define EXC_RETURN_DCRS (0x00000020UL) /* bit [5] stacking rules for called registers: 0=skipped 1=saved */ -#define EXC_RETURN_FTYPE (0x00000010UL) /* bit [4] allocate stack for floating-point context: 0=done 1=skipped */ -#define EXC_RETURN_MODE (0x00000008UL) /* bit [3] processor mode for return: 0=Handler mode 1=Thread mode */ -#define EXC_RETURN_SPSEL (0x00000002UL) /* bit [1] stack pointer used to restore context: 0=MSP 1=PSP */ -#define EXC_RETURN_ES (0x00000001UL) /* bit [0] security state exception was taken to: 0=Non-secure 1=Secure */ - -/* Integrity Signature (from ARMv8-M Architecture Reference Manual) for exception context stacking */ -#if defined (__FPU_PRESENT) && (__FPU_PRESENT == 1U) /* Value for processors with floating-point extension: */ -#define EXC_INTEGRITY_SIGNATURE (0xFEFA125AUL) /* bit [0] SFTC must match LR bit[4] EXC_RETURN_FTYPE */ -#else -#define EXC_INTEGRITY_SIGNATURE (0xFEFA125BUL) /* Value for processors without floating-point extension */ -#endif - - -/** - \brief Set Priority Grouping - \details Sets the priority grouping field using the required unlock sequence. - The parameter PriorityGroup is assigned to the field SCB->AIRCR [10:8] PRIGROUP field. - Only values from 0..7 are used. - In case of a conflict between priority grouping and available - priority bits (__NVIC_PRIO_BITS), the smallest possible priority group is set. - \param [in] PriorityGroup Priority grouping field. - */ -__STATIC_INLINE void __NVIC_SetPriorityGrouping(uint32_t PriorityGroup) -{ - uint32_t reg_value; - uint32_t PriorityGroupTmp = (PriorityGroup & (uint32_t)0x07UL); /* only values 0..7 are used */ - - reg_value = SCB->AIRCR; /* read old register configuration */ - reg_value &= ~((uint32_t)(SCB_AIRCR_VECTKEY_Msk | SCB_AIRCR_PRIGROUP_Msk)); /* clear bits to change */ - reg_value = (reg_value | - ((uint32_t)0x5FAUL << SCB_AIRCR_VECTKEY_Pos) | - (PriorityGroupTmp << 8U) ); /* Insert write key and priority group */ - SCB->AIRCR = reg_value; -} - - -/** - \brief Get Priority Grouping - \details Reads the priority grouping field from the NVIC Interrupt Controller. - \return Priority grouping field (SCB->AIRCR [10:8] PRIGROUP field). - */ -__STATIC_INLINE uint32_t __NVIC_GetPriorityGrouping(void) -{ - return ((uint32_t)((SCB->AIRCR & SCB_AIRCR_PRIGROUP_Msk) >> SCB_AIRCR_PRIGROUP_Pos)); -} - - -/** - \brief Enable Interrupt - \details Enables a device specific interrupt in the NVIC interrupt controller. - \param [in] IRQn Device specific interrupt number. - \note IRQn must not be negative. - */ -__STATIC_INLINE void __NVIC_EnableIRQ(IRQn_Type IRQn) -{ - if ((int32_t)(IRQn) >= 0) - { - NVIC->ISER[(((uint32_t)IRQn) >> 5UL)] = (uint32_t)(1UL << (((uint32_t)IRQn) & 0x1FUL)); - } -} - - -/** - \brief Get Interrupt Enable status - \details Returns a device specific interrupt enable status from the NVIC interrupt controller. - \param [in] IRQn Device specific interrupt number. - \return 0 Interrupt is not enabled. - \return 1 Interrupt is enabled. - \note IRQn must not be negative. - */ -__STATIC_INLINE uint32_t __NVIC_GetEnableIRQ(IRQn_Type IRQn) -{ - if ((int32_t)(IRQn) >= 0) - { - return((uint32_t)(((NVIC->ISER[(((uint32_t)IRQn) >> 5UL)] & (1UL << (((uint32_t)IRQn) & 0x1FUL))) != 0UL) ? 1UL : 0UL)); - } - else - { - return(0U); - } -} - - -/** - \brief Disable Interrupt - \details Disables a device specific interrupt in the NVIC interrupt controller. - \param [in] IRQn Device specific interrupt number. - \note IRQn must not be negative. - */ -__STATIC_INLINE void __NVIC_DisableIRQ(IRQn_Type IRQn) -{ - if ((int32_t)(IRQn) >= 0) - { - NVIC->ICER[(((uint32_t)IRQn) >> 5UL)] = (uint32_t)(1UL << (((uint32_t)IRQn) & 0x1FUL)); - __DSB(); - __ISB(); - } -} - - -/** - \brief Get Pending Interrupt - \details Reads the NVIC pending register and returns the pending bit for the specified device specific interrupt. - \param [in] IRQn Device specific interrupt number. - \return 0 Interrupt status is not pending. - \return 1 Interrupt status is pending. - \note IRQn must not be negative. - */ -__STATIC_INLINE uint32_t __NVIC_GetPendingIRQ(IRQn_Type IRQn) -{ - if ((int32_t)(IRQn) >= 0) - { - return((uint32_t)(((NVIC->ISPR[(((uint32_t)IRQn) >> 5UL)] & (1UL << (((uint32_t)IRQn) & 0x1FUL))) != 0UL) ? 1UL : 0UL)); - } - else - { - return(0U); - } -} - - -/** - \brief Set Pending Interrupt - \details Sets the pending bit of a device specific interrupt in the NVIC pending register. - \param [in] IRQn Device specific interrupt number. - \note IRQn must not be negative. - */ -__STATIC_INLINE void __NVIC_SetPendingIRQ(IRQn_Type IRQn) -{ - if ((int32_t)(IRQn) >= 0) - { - NVIC->ISPR[(((uint32_t)IRQn) >> 5UL)] = (uint32_t)(1UL << (((uint32_t)IRQn) & 0x1FUL)); - } -} - - -/** - \brief Clear Pending Interrupt - \details Clears the pending bit of a device specific interrupt in the NVIC pending register. - \param [in] IRQn Device specific interrupt number. - \note IRQn must not be negative. - */ -__STATIC_INLINE void __NVIC_ClearPendingIRQ(IRQn_Type IRQn) -{ - if ((int32_t)(IRQn) >= 0) - { - NVIC->ICPR[(((uint32_t)IRQn) >> 5UL)] = (uint32_t)(1UL << (((uint32_t)IRQn) & 0x1FUL)); - } -} - - -/** - \brief Get Active Interrupt - \details Reads the active register in the NVIC and returns the active bit for the device specific interrupt. - \param [in] IRQn Device specific interrupt number. - \return 0 Interrupt status is not active. - \return 1 Interrupt status is active. - \note IRQn must not be negative. - */ -__STATIC_INLINE uint32_t __NVIC_GetActive(IRQn_Type IRQn) -{ - if ((int32_t)(IRQn) >= 0) - { - return((uint32_t)(((NVIC->IABR[(((uint32_t)IRQn) >> 5UL)] & (1UL << (((uint32_t)IRQn) & 0x1FUL))) != 0UL) ? 1UL : 0UL)); - } - else - { - return(0U); - } -} - - -#if defined (__ARM_FEATURE_CMSE) && (__ARM_FEATURE_CMSE == 3U) -/** - \brief Get Interrupt Target State - \details Reads the interrupt target field in the NVIC and returns the interrupt target bit for the device specific interrupt. - \param [in] IRQn Device specific interrupt number. - \return 0 if interrupt is assigned to Secure - \return 1 if interrupt is assigned to Non Secure - \note IRQn must not be negative. - */ -__STATIC_INLINE uint32_t NVIC_GetTargetState(IRQn_Type IRQn) -{ - if ((int32_t)(IRQn) >= 0) - { - return((uint32_t)(((NVIC->ITNS[(((uint32_t)IRQn) >> 5UL)] & (1UL << (((uint32_t)IRQn) & 0x1FUL))) != 0UL) ? 1UL : 0UL)); - } - else - { - return(0U); - } -} - - -/** - \brief Set Interrupt Target State - \details Sets the interrupt target field in the NVIC and returns the interrupt target bit for the device specific interrupt. - \param [in] IRQn Device specific interrupt number. - \return 0 if interrupt is assigned to Secure - 1 if interrupt is assigned to Non Secure - \note IRQn must not be negative. - */ -__STATIC_INLINE uint32_t NVIC_SetTargetState(IRQn_Type IRQn) -{ - if ((int32_t)(IRQn) >= 0) - { - NVIC->ITNS[(((uint32_t)IRQn) >> 5UL)] |= ((uint32_t)(1UL << (((uint32_t)IRQn) & 0x1FUL))); - return((uint32_t)(((NVIC->ITNS[(((uint32_t)IRQn) >> 5UL)] & (1UL << (((uint32_t)IRQn) & 0x1FUL))) != 0UL) ? 1UL : 0UL)); - } - else - { - return(0U); - } -} - - -/** - \brief Clear Interrupt Target State - \details Clears the interrupt target field in the NVIC and returns the interrupt target bit for the device specific interrupt. - \param [in] IRQn Device specific interrupt number. - \return 0 if interrupt is assigned to Secure - 1 if interrupt is assigned to Non Secure - \note IRQn must not be negative. - */ -__STATIC_INLINE uint32_t NVIC_ClearTargetState(IRQn_Type IRQn) -{ - if ((int32_t)(IRQn) >= 0) - { - NVIC->ITNS[(((uint32_t)IRQn) >> 5UL)] &= ~((uint32_t)(1UL << (((uint32_t)IRQn) & 0x1FUL))); - return((uint32_t)(((NVIC->ITNS[(((uint32_t)IRQn) >> 5UL)] & (1UL << (((uint32_t)IRQn) & 0x1FUL))) != 0UL) ? 1UL : 0UL)); - } - else - { - return(0U); - } -} -#endif /* defined (__ARM_FEATURE_CMSE) && (__ARM_FEATURE_CMSE == 3U) */ - - -/** - \brief Set Interrupt Priority - \details Sets the priority of a device specific interrupt or a processor exception. - The interrupt number can be positive to specify a device specific interrupt, - or negative to specify a processor exception. - \param [in] IRQn Interrupt number. - \param [in] priority Priority to set. - \note The priority cannot be set for every processor exception. - */ -__STATIC_INLINE void __NVIC_SetPriority(IRQn_Type IRQn, uint32_t priority) -{ - if ((int32_t)(IRQn) >= 0) - { - NVIC->IPR[((uint32_t)IRQn)] = (uint8_t)((priority << (8U - __NVIC_PRIO_BITS)) & (uint32_t)0xFFUL); - } - else - { - SCB->SHPR[(((uint32_t)IRQn) & 0xFUL)-4UL] = (uint8_t)((priority << (8U - __NVIC_PRIO_BITS)) & (uint32_t)0xFFUL); - } -} - - -/** - \brief Get Interrupt Priority - \details Reads the priority of a device specific interrupt or a processor exception. - The interrupt number can be positive to specify a device specific interrupt, - or negative to specify a processor exception. - \param [in] IRQn Interrupt number. - \return Interrupt Priority. - Value is aligned automatically to the implemented priority bits of the microcontroller. - */ -__STATIC_INLINE uint32_t __NVIC_GetPriority(IRQn_Type IRQn) -{ - - if ((int32_t)(IRQn) >= 0) - { - return(((uint32_t)NVIC->IPR[((uint32_t)IRQn)] >> (8U - __NVIC_PRIO_BITS))); - } - else - { - return(((uint32_t)SCB->SHPR[(((uint32_t)IRQn) & 0xFUL)-4UL] >> (8U - __NVIC_PRIO_BITS))); - } -} - - -/** - \brief Encode Priority - \details Encodes the priority for an interrupt with the given priority group, - preemptive priority value, and subpriority value. - In case of a conflict between priority grouping and available - priority bits (__NVIC_PRIO_BITS), the smallest possible priority group is set. - \param [in] PriorityGroup Used priority group. - \param [in] PreemptPriority Preemptive priority value (starting from 0). - \param [in] SubPriority Subpriority value (starting from 0). - \return Encoded priority. Value can be used in the function \ref NVIC_SetPriority(). - */ -__STATIC_INLINE uint32_t NVIC_EncodePriority (uint32_t PriorityGroup, uint32_t PreemptPriority, uint32_t SubPriority) -{ - uint32_t PriorityGroupTmp = (PriorityGroup & (uint32_t)0x07UL); /* only values 0..7 are used */ - uint32_t PreemptPriorityBits; - uint32_t SubPriorityBits; - - PreemptPriorityBits = ((7UL - PriorityGroupTmp) > (uint32_t)(__NVIC_PRIO_BITS)) ? (uint32_t)(__NVIC_PRIO_BITS) : (uint32_t)(7UL - PriorityGroupTmp); - SubPriorityBits = ((PriorityGroupTmp + (uint32_t)(__NVIC_PRIO_BITS)) < (uint32_t)7UL) ? (uint32_t)0UL : (uint32_t)((PriorityGroupTmp - 7UL) + (uint32_t)(__NVIC_PRIO_BITS)); - - return ( - ((PreemptPriority & (uint32_t)((1UL << (PreemptPriorityBits)) - 1UL)) << SubPriorityBits) | - ((SubPriority & (uint32_t)((1UL << (SubPriorityBits )) - 1UL))) - ); -} - - -/** - \brief Decode Priority - \details Decodes an interrupt priority value with a given priority group to - preemptive priority value and subpriority value. - In case of a conflict between priority grouping and available - priority bits (__NVIC_PRIO_BITS) the smallest possible priority group is set. - \param [in] Priority Priority value, which can be retrieved with the function \ref NVIC_GetPriority(). - \param [in] PriorityGroup Used priority group. - \param [out] pPreemptPriority Preemptive priority value (starting from 0). - \param [out] pSubPriority Subpriority value (starting from 0). - */ -__STATIC_INLINE void NVIC_DecodePriority (uint32_t Priority, uint32_t PriorityGroup, uint32_t* const pPreemptPriority, uint32_t* const pSubPriority) -{ - uint32_t PriorityGroupTmp = (PriorityGroup & (uint32_t)0x07UL); /* only values 0..7 are used */ - uint32_t PreemptPriorityBits; - uint32_t SubPriorityBits; - - PreemptPriorityBits = ((7UL - PriorityGroupTmp) > (uint32_t)(__NVIC_PRIO_BITS)) ? (uint32_t)(__NVIC_PRIO_BITS) : (uint32_t)(7UL - PriorityGroupTmp); - SubPriorityBits = ((PriorityGroupTmp + (uint32_t)(__NVIC_PRIO_BITS)) < (uint32_t)7UL) ? (uint32_t)0UL : (uint32_t)((PriorityGroupTmp - 7UL) + (uint32_t)(__NVIC_PRIO_BITS)); - - *pPreemptPriority = (Priority >> SubPriorityBits) & (uint32_t)((1UL << (PreemptPriorityBits)) - 1UL); - *pSubPriority = (Priority ) & (uint32_t)((1UL << (SubPriorityBits )) - 1UL); -} - - -/** - \brief Set Interrupt Vector - \details Sets an interrupt vector in SRAM based interrupt vector table. - The interrupt number can be positive to specify a device specific interrupt, - or negative to specify a processor exception. - VTOR must been relocated to SRAM before. - \param [in] IRQn Interrupt number - \param [in] vector Address of interrupt handler function - */ -__STATIC_INLINE void __NVIC_SetVector(IRQn_Type IRQn, uint32_t vector) -{ - uint32_t *vectors = (uint32_t *)SCB->VTOR; - vectors[(int32_t)IRQn + NVIC_USER_IRQ_OFFSET] = vector; -} - - -/** - \brief Get Interrupt Vector - \details Reads an interrupt vector from interrupt vector table. - The interrupt number can be positive to specify a device specific interrupt, - or negative to specify a processor exception. - \param [in] IRQn Interrupt number. - \return Address of interrupt handler function - */ -__STATIC_INLINE uint32_t __NVIC_GetVector(IRQn_Type IRQn) -{ - uint32_t *vectors = (uint32_t *)SCB->VTOR; - return vectors[(int32_t)IRQn + NVIC_USER_IRQ_OFFSET]; -} - - -/** - \brief System Reset - \details Initiates a system reset request to reset the MCU. - */ -__NO_RETURN __STATIC_INLINE void __NVIC_SystemReset(void) -{ - __DSB(); /* Ensure all outstanding memory accesses included - buffered write are completed before reset */ - SCB->AIRCR = (uint32_t)((0x5FAUL << SCB_AIRCR_VECTKEY_Pos) | - (SCB->AIRCR & SCB_AIRCR_PRIGROUP_Msk) | - SCB_AIRCR_SYSRESETREQ_Msk ); /* Keep priority group unchanged */ - __DSB(); /* Ensure completion of memory access */ - - for(;;) /* wait until reset */ - { - __NOP(); - } -} - -#if defined (__ARM_FEATURE_CMSE) && (__ARM_FEATURE_CMSE == 3U) -/** - \brief Set Priority Grouping (non-secure) - \details Sets the non-secure priority grouping field when in secure state using the required unlock sequence. - The parameter PriorityGroup is assigned to the field SCB->AIRCR [10:8] PRIGROUP field. - Only values from 0..7 are used. - In case of a conflict between priority grouping and available - priority bits (__NVIC_PRIO_BITS), the smallest possible priority group is set. - \param [in] PriorityGroup Priority grouping field. - */ -__STATIC_INLINE void TZ_NVIC_SetPriorityGrouping_NS(uint32_t PriorityGroup) -{ - uint32_t reg_value; - uint32_t PriorityGroupTmp = (PriorityGroup & (uint32_t)0x07UL); /* only values 0..7 are used */ - - reg_value = SCB_NS->AIRCR; /* read old register configuration */ - reg_value &= ~((uint32_t)(SCB_AIRCR_VECTKEY_Msk | SCB_AIRCR_PRIGROUP_Msk)); /* clear bits to change */ - reg_value = (reg_value | - ((uint32_t)0x5FAUL << SCB_AIRCR_VECTKEY_Pos) | - (PriorityGroupTmp << SCB_AIRCR_PRIGROUP_Pos) ); /* Insert write key and priority group */ - SCB_NS->AIRCR = reg_value; -} - - -/** - \brief Get Priority Grouping (non-secure) - \details Reads the priority grouping field from the non-secure NVIC when in secure state. - \return Priority grouping field (SCB->AIRCR [10:8] PRIGROUP field). - */ -__STATIC_INLINE uint32_t TZ_NVIC_GetPriorityGrouping_NS(void) -{ - return ((uint32_t)((SCB_NS->AIRCR & SCB_AIRCR_PRIGROUP_Msk) >> SCB_AIRCR_PRIGROUP_Pos)); -} - - -/** - \brief Enable Interrupt (non-secure) - \details Enables a device specific interrupt in the non-secure NVIC interrupt controller when in secure state. - \param [in] IRQn Device specific interrupt number. - \note IRQn must not be negative. - */ -__STATIC_INLINE void TZ_NVIC_EnableIRQ_NS(IRQn_Type IRQn) -{ - if ((int32_t)(IRQn) >= 0) - { - NVIC_NS->ISER[(((uint32_t)IRQn) >> 5UL)] = (uint32_t)(1UL << (((uint32_t)IRQn) & 0x1FUL)); - } -} - - -/** - \brief Get Interrupt Enable status (non-secure) - \details Returns a device specific interrupt enable status from the non-secure NVIC interrupt controller when in secure state. - \param [in] IRQn Device specific interrupt number. - \return 0 Interrupt is not enabled. - \return 1 Interrupt is enabled. - \note IRQn must not be negative. - */ -__STATIC_INLINE uint32_t TZ_NVIC_GetEnableIRQ_NS(IRQn_Type IRQn) -{ - if ((int32_t)(IRQn) >= 0) - { - return((uint32_t)(((NVIC_NS->ISER[(((uint32_t)IRQn) >> 5UL)] & (1UL << (((uint32_t)IRQn) & 0x1FUL))) != 0UL) ? 1UL : 0UL)); - } - else - { - return(0U); - } -} - - -/** - \brief Disable Interrupt (non-secure) - \details Disables a device specific interrupt in the non-secure NVIC interrupt controller when in secure state. - \param [in] IRQn Device specific interrupt number. - \note IRQn must not be negative. - */ -__STATIC_INLINE void TZ_NVIC_DisableIRQ_NS(IRQn_Type IRQn) -{ - if ((int32_t)(IRQn) >= 0) - { - NVIC_NS->ICER[(((uint32_t)IRQn) >> 5UL)] = (uint32_t)(1UL << (((uint32_t)IRQn) & 0x1FUL)); - } -} - - -/** - \brief Get Pending Interrupt (non-secure) - \details Reads the NVIC pending register in the non-secure NVIC when in secure state and returns the pending bit for the specified device specific interrupt. - \param [in] IRQn Device specific interrupt number. - \return 0 Interrupt status is not pending. - \return 1 Interrupt status is pending. - \note IRQn must not be negative. - */ -__STATIC_INLINE uint32_t TZ_NVIC_GetPendingIRQ_NS(IRQn_Type IRQn) -{ - if ((int32_t)(IRQn) >= 0) - { - return((uint32_t)(((NVIC_NS->ISPR[(((uint32_t)IRQn) >> 5UL)] & (1UL << (((uint32_t)IRQn) & 0x1FUL))) != 0UL) ? 1UL : 0UL)); - } - else - { - return(0U); - } -} - - -/** - \brief Set Pending Interrupt (non-secure) - \details Sets the pending bit of a device specific interrupt in the non-secure NVIC pending register when in secure state. - \param [in] IRQn Device specific interrupt number. - \note IRQn must not be negative. - */ -__STATIC_INLINE void TZ_NVIC_SetPendingIRQ_NS(IRQn_Type IRQn) -{ - if ((int32_t)(IRQn) >= 0) - { - NVIC_NS->ISPR[(((uint32_t)IRQn) >> 5UL)] = (uint32_t)(1UL << (((uint32_t)IRQn) & 0x1FUL)); - } -} - - -/** - \brief Clear Pending Interrupt (non-secure) - \details Clears the pending bit of a device specific interrupt in the non-secure NVIC pending register when in secure state. - \param [in] IRQn Device specific interrupt number. - \note IRQn must not be negative. - */ -__STATIC_INLINE void TZ_NVIC_ClearPendingIRQ_NS(IRQn_Type IRQn) -{ - if ((int32_t)(IRQn) >= 0) - { - NVIC_NS->ICPR[(((uint32_t)IRQn) >> 5UL)] = (uint32_t)(1UL << (((uint32_t)IRQn) & 0x1FUL)); - } -} - - -/** - \brief Get Active Interrupt (non-secure) - \details Reads the active register in non-secure NVIC when in secure state and returns the active bit for the device specific interrupt. - \param [in] IRQn Device specific interrupt number. - \return 0 Interrupt status is not active. - \return 1 Interrupt status is active. - \note IRQn must not be negative. - */ -__STATIC_INLINE uint32_t TZ_NVIC_GetActive_NS(IRQn_Type IRQn) -{ - if ((int32_t)(IRQn) >= 0) - { - return((uint32_t)(((NVIC_NS->IABR[(((uint32_t)IRQn) >> 5UL)] & (1UL << (((uint32_t)IRQn) & 0x1FUL))) != 0UL) ? 1UL : 0UL)); - } - else - { - return(0U); - } -} - - -/** - \brief Set Interrupt Priority (non-secure) - \details Sets the priority of a non-secure device specific interrupt or a non-secure processor exception when in secure state. - The interrupt number can be positive to specify a device specific interrupt, - or negative to specify a processor exception. - \param [in] IRQn Interrupt number. - \param [in] priority Priority to set. - \note The priority cannot be set for every non-secure processor exception. - */ -__STATIC_INLINE void TZ_NVIC_SetPriority_NS(IRQn_Type IRQn, uint32_t priority) -{ - if ((int32_t)(IRQn) >= 0) - { - NVIC_NS->IPR[((uint32_t)IRQn)] = (uint8_t)((priority << (8U - __NVIC_PRIO_BITS)) & (uint32_t)0xFFUL); - } - else - { - SCB_NS->SHPR[(((uint32_t)IRQn) & 0xFUL)-4UL] = (uint8_t)((priority << (8U - __NVIC_PRIO_BITS)) & (uint32_t)0xFFUL); - } -} - - -/** - \brief Get Interrupt Priority (non-secure) - \details Reads the priority of a non-secure device specific interrupt or a non-secure processor exception when in secure state. - The interrupt number can be positive to specify a device specific interrupt, - or negative to specify a processor exception. - \param [in] IRQn Interrupt number. - \return Interrupt Priority. Value is aligned automatically to the implemented priority bits of the microcontroller. - */ -__STATIC_INLINE uint32_t TZ_NVIC_GetPriority_NS(IRQn_Type IRQn) -{ - - if ((int32_t)(IRQn) >= 0) - { - return(((uint32_t)NVIC_NS->IPR[((uint32_t)IRQn)] >> (8U - __NVIC_PRIO_BITS))); - } - else - { - return(((uint32_t)SCB_NS->SHPR[(((uint32_t)IRQn) & 0xFUL)-4UL] >> (8U - __NVIC_PRIO_BITS))); - } -} -#endif /* defined (__ARM_FEATURE_CMSE) &&(__ARM_FEATURE_CMSE == 3U) */ - -/*@} end of CMSIS_Core_NVICFunctions */ - -/* ########################## MPU functions #################################### */ - -#if defined (__MPU_PRESENT) && (__MPU_PRESENT == 1U) - -#include "mpu_armv8.h" - -#endif - -/* ########################## FPU functions #################################### */ -/** - \ingroup CMSIS_Core_FunctionInterface - \defgroup CMSIS_Core_FpuFunctions FPU Functions - \brief Function that provides FPU type. - @{ - */ - -/** - \brief get FPU type - \details returns the FPU type - \returns - - \b 0: No FPU - - \b 1: Single precision FPU - - \b 2: Double + Single precision FPU - */ -__STATIC_INLINE uint32_t SCB_GetFPUType(void) -{ - uint32_t mvfr0; - - mvfr0 = FPU->MVFR0; - if ((mvfr0 & (FPU_MVFR0_Single_precision_Msk | FPU_MVFR0_Double_precision_Msk)) == 0x220U) - { - return 2U; /* Double + Single precision FPU */ - } - else if ((mvfr0 & (FPU_MVFR0_Single_precision_Msk | FPU_MVFR0_Double_precision_Msk)) == 0x020U) - { - return 1U; /* Single precision FPU */ - } - else - { - return 0U; /* No FPU */ - } -} - - -/*@} end of CMSIS_Core_FpuFunctions */ - - - -/* ########################## SAU functions #################################### */ -/** - \ingroup CMSIS_Core_FunctionInterface - \defgroup CMSIS_Core_SAUFunctions SAU Functions - \brief Functions that configure the SAU. - @{ - */ - -#if defined (__ARM_FEATURE_CMSE) && (__ARM_FEATURE_CMSE == 3U) - -/** - \brief Enable SAU - \details Enables the Security Attribution Unit (SAU). - */ -__STATIC_INLINE void TZ_SAU_Enable(void) -{ - SAU->CTRL |= (SAU_CTRL_ENABLE_Msk); -} - - - -/** - \brief Disable SAU - \details Disables the Security Attribution Unit (SAU). - */ -__STATIC_INLINE void TZ_SAU_Disable(void) -{ - SAU->CTRL &= ~(SAU_CTRL_ENABLE_Msk); -} - -#endif /* defined (__ARM_FEATURE_CMSE) && (__ARM_FEATURE_CMSE == 3U) */ - -/*@} end of CMSIS_Core_SAUFunctions */ - - - - -/* ################################## SysTick function ############################################ */ -/** - \ingroup CMSIS_Core_FunctionInterface - \defgroup CMSIS_Core_SysTickFunctions SysTick Functions - \brief Functions that configure the System. - @{ - */ - -#if defined (__Vendor_SysTickConfig) && (__Vendor_SysTickConfig == 0U) - -/** - \brief System Tick Configuration - \details Initializes the System Timer and its interrupt, and starts the System Tick Timer. - Counter is in free running mode to generate periodic interrupts. - \param [in] ticks Number of ticks between two interrupts. - \return 0 Function succeeded. - \return 1 Function failed. - \note When the variable __Vendor_SysTickConfig is set to 1, then the - function SysTick_Config is not included. In this case, the file device.h - must contain a vendor-specific implementation of this function. - */ -__STATIC_INLINE uint32_t SysTick_Config(uint32_t ticks) -{ - if ((ticks - 1UL) > SysTick_LOAD_RELOAD_Msk) - { - return (1UL); /* Reload value impossible */ - } - - SysTick->LOAD = (uint32_t)(ticks - 1UL); /* set reload register */ - NVIC_SetPriority (SysTick_IRQn, (1UL << __NVIC_PRIO_BITS) - 1UL); /* set Priority for Systick Interrupt */ - SysTick->VAL = 0UL; /* Load the SysTick Counter Value */ - SysTick->CTRL = SysTick_CTRL_CLKSOURCE_Msk | - SysTick_CTRL_TICKINT_Msk | - SysTick_CTRL_ENABLE_Msk; /* Enable SysTick IRQ and SysTick Timer */ - return (0UL); /* Function successful */ -} - -#if defined (__ARM_FEATURE_CMSE) && (__ARM_FEATURE_CMSE == 3U) -/** - \brief System Tick Configuration (non-secure) - \details Initializes the non-secure System Timer and its interrupt when in secure state, and starts the System Tick Timer. - Counter is in free running mode to generate periodic interrupts. - \param [in] ticks Number of ticks between two interrupts. - \return 0 Function succeeded. - \return 1 Function failed. - \note When the variable __Vendor_SysTickConfig is set to 1, then the - function TZ_SysTick_Config_NS is not included. In this case, the file device.h - must contain a vendor-specific implementation of this function. - - */ -__STATIC_INLINE uint32_t TZ_SysTick_Config_NS(uint32_t ticks) -{ - if ((ticks - 1UL) > SysTick_LOAD_RELOAD_Msk) - { - return (1UL); /* Reload value impossible */ - } - - SysTick_NS->LOAD = (uint32_t)(ticks - 1UL); /* set reload register */ - TZ_NVIC_SetPriority_NS (SysTick_IRQn, (1UL << __NVIC_PRIO_BITS) - 1UL); /* set Priority for Systick Interrupt */ - SysTick_NS->VAL = 0UL; /* Load the SysTick Counter Value */ - SysTick_NS->CTRL = SysTick_CTRL_CLKSOURCE_Msk | - SysTick_CTRL_TICKINT_Msk | - SysTick_CTRL_ENABLE_Msk; /* Enable SysTick IRQ and SysTick Timer */ - return (0UL); /* Function successful */ -} -#endif /* defined (__ARM_FEATURE_CMSE) && (__ARM_FEATURE_CMSE == 3U) */ - -#endif - -/*@} end of CMSIS_Core_SysTickFunctions */ - - - -/* ##################################### Debug In/Output function ########################################### */ -/** - \ingroup CMSIS_Core_FunctionInterface - \defgroup CMSIS_core_DebugFunctions ITM Functions - \brief Functions that access the ITM debug interface. - @{ - */ - -extern volatile int32_t ITM_RxBuffer; /*!< External variable to receive characters. */ -#define ITM_RXBUFFER_EMPTY ((int32_t)0x5AA55AA5U) /*!< Value identifying \ref ITM_RxBuffer is ready for next character. */ - - -/** - \brief ITM Send Character - \details Transmits a character via the ITM channel 0, and - \li Just returns when no debugger is connected that has booked the output. - \li Is blocking when a debugger is connected, but the previous character sent has not been transmitted. - \param [in] ch Character to transmit. - \returns Character to transmit. - */ -__STATIC_INLINE uint32_t ITM_SendChar (uint32_t ch) -{ - if (((ITM->TCR & ITM_TCR_ITMENA_Msk) != 0UL) && /* ITM enabled */ - ((ITM->TER & 1UL ) != 0UL) ) /* ITM Port #0 enabled */ - { - while (ITM->PORT[0U].u32 == 0UL) - { - __NOP(); - } - ITM->PORT[0U].u8 = (uint8_t)ch; - } - return (ch); -} - - -/** - \brief ITM Receive Character - \details Inputs a character via the external variable \ref ITM_RxBuffer. - \return Received character. - \return -1 No character pending. - */ -__STATIC_INLINE int32_t ITM_ReceiveChar (void) -{ - int32_t ch = -1; /* no character available */ - - if (ITM_RxBuffer != ITM_RXBUFFER_EMPTY) - { - ch = ITM_RxBuffer; - ITM_RxBuffer = ITM_RXBUFFER_EMPTY; /* ready for next character */ - } - - return (ch); -} - - -/** - \brief ITM Check Character - \details Checks whether a character is pending for reading in the variable \ref ITM_RxBuffer. - \return 0 No character available. - \return 1 Character available. - */ -__STATIC_INLINE int32_t ITM_CheckChar (void) -{ - - if (ITM_RxBuffer == ITM_RXBUFFER_EMPTY) - { - return (0); /* no character available */ - } - else - { - return (1); /* character available */ - } -} - -/*@} end of CMSIS_core_DebugFunctions */ - - - - -#ifdef __cplusplus -} -#endif - -#endif /* __CORE_CM33_H_DEPENDANT */ - -#endif /* __CMSIS_GENERIC */ diff --git a/test_dma/Drivers/CMSIS/Include/core_cm4.h b/test_dma/Drivers/CMSIS/Include/core_cm4.h deleted file mode 100644 index 308b868..0000000 --- a/test_dma/Drivers/CMSIS/Include/core_cm4.h +++ /dev/null @@ -1,2129 +0,0 @@ -/**************************************************************************//** - * @file core_cm4.h - * @brief CMSIS Cortex-M4 Core Peripheral Access Layer Header File - * @version V5.0.8 - * @date 04. June 2018 - ******************************************************************************/ -/* - * Copyright (c) 2009-2018 Arm Limited. All rights reserved. - * - * SPDX-License-Identifier: Apache-2.0 - * - * Licensed under the Apache License, Version 2.0 (the License); you may - * not use this file except in compliance with the License. - * You may obtain a copy of the License at - * - * www.apache.org/licenses/LICENSE-2.0 - * - * Unless required by applicable law or agreed to in writing, software - * distributed under the License is distributed on an AS IS BASIS, WITHOUT - * WARRANTIES OR CONDITIONS OF ANY KIND, either express or implied. - * See the License for the specific language governing permissions and - * limitations under the License. - */ - -#if defined ( __ICCARM__ ) - #pragma system_include /* treat file as system include file for MISRA check */ -#elif defined (__clang__) - #pragma clang system_header /* treat file as system include file */ -#endif - -#ifndef __CORE_CM4_H_GENERIC -#define __CORE_CM4_H_GENERIC - -#include - -#ifdef __cplusplus - extern "C" { -#endif - -/** - \page CMSIS_MISRA_Exceptions MISRA-C:2004 Compliance Exceptions - CMSIS violates the following MISRA-C:2004 rules: - - \li Required Rule 8.5, object/function definition in header file.
- Function definitions in header files are used to allow 'inlining'. - - \li Required Rule 18.4, declaration of union type or object of union type: '{...}'.
- Unions are used for effective representation of core registers. - - \li Advisory Rule 19.7, Function-like macro defined.
- Function-like macros are used to allow more efficient code. - */ - - -/******************************************************************************* - * CMSIS definitions - ******************************************************************************/ -/** - \ingroup Cortex_M4 - @{ - */ - -#include "cmsis_version.h" - -/* CMSIS CM4 definitions */ -#define __CM4_CMSIS_VERSION_MAIN (__CM_CMSIS_VERSION_MAIN) /*!< \deprecated [31:16] CMSIS HAL main version */ -#define __CM4_CMSIS_VERSION_SUB (__CM_CMSIS_VERSION_SUB) /*!< \deprecated [15:0] CMSIS HAL sub version */ -#define __CM4_CMSIS_VERSION ((__CM4_CMSIS_VERSION_MAIN << 16U) | \ - __CM4_CMSIS_VERSION_SUB ) /*!< \deprecated CMSIS HAL version number */ - -#define __CORTEX_M (4U) /*!< Cortex-M Core */ - -/** __FPU_USED indicates whether an FPU is used or not. - For this, __FPU_PRESENT has to be checked prior to making use of FPU specific registers and functions. -*/ -#if defined ( __CC_ARM ) - #if defined __TARGET_FPU_VFP - #if defined (__FPU_PRESENT) && (__FPU_PRESENT == 1U) - #define __FPU_USED 1U - #else - #error "Compiler generates FPU instructions for a device without an FPU (check __FPU_PRESENT)" - #define __FPU_USED 0U - #endif - #else - #define __FPU_USED 0U - #endif - -#elif defined (__ARMCC_VERSION) && (__ARMCC_VERSION >= 6010050) - #if defined __ARM_PCS_VFP - #if defined (__FPU_PRESENT) && (__FPU_PRESENT == 1U) - #define __FPU_USED 1U - #else - #warning "Compiler generates FPU instructions for a device without an FPU (check __FPU_PRESENT)" - #define __FPU_USED 0U - #endif - #else - #define __FPU_USED 0U - #endif - -#elif defined ( __GNUC__ ) - #if defined (__VFP_FP__) && !defined(__SOFTFP__) - #if defined (__FPU_PRESENT) && (__FPU_PRESENT == 1U) - #define __FPU_USED 1U - #else - #error "Compiler generates FPU instructions for a device without an FPU (check __FPU_PRESENT)" - #define __FPU_USED 0U - #endif - #else - #define __FPU_USED 0U - #endif - -#elif defined ( __ICCARM__ ) - #if defined __ARMVFP__ - #if defined (__FPU_PRESENT) && (__FPU_PRESENT == 1U) - #define __FPU_USED 1U - #else - #error "Compiler generates FPU instructions for a device without an FPU (check __FPU_PRESENT)" - #define __FPU_USED 0U - #endif - #else - #define __FPU_USED 0U - #endif - -#elif defined ( __TI_ARM__ ) - #if defined __TI_VFP_SUPPORT__ - #if defined (__FPU_PRESENT) && (__FPU_PRESENT == 1U) - #define __FPU_USED 1U - #else - #error "Compiler generates FPU instructions for a device without an FPU (check __FPU_PRESENT)" - #define __FPU_USED 0U - #endif - #else - #define __FPU_USED 0U - #endif - -#elif defined ( __TASKING__ ) - #if defined __FPU_VFP__ - #if defined (__FPU_PRESENT) && (__FPU_PRESENT == 1U) - #define __FPU_USED 1U - #else - #error "Compiler generates FPU instructions for a device without an FPU (check __FPU_PRESENT)" - #define __FPU_USED 0U - #endif - #else - #define __FPU_USED 0U - #endif - -#elif defined ( __CSMC__ ) - #if ( __CSMC__ & 0x400U) - #if defined (__FPU_PRESENT) && (__FPU_PRESENT == 1U) - #define __FPU_USED 1U - #else - #error "Compiler generates FPU instructions for a device without an FPU (check __FPU_PRESENT)" - #define __FPU_USED 0U - #endif - #else - #define __FPU_USED 0U - #endif - -#endif - -#include "cmsis_compiler.h" /* CMSIS compiler specific defines */ - - -#ifdef __cplusplus -} -#endif - -#endif /* __CORE_CM4_H_GENERIC */ - -#ifndef __CMSIS_GENERIC - -#ifndef __CORE_CM4_H_DEPENDANT -#define __CORE_CM4_H_DEPENDANT - -#ifdef __cplusplus - extern "C" { -#endif - -/* check device defines and use defaults */ -#if defined __CHECK_DEVICE_DEFINES - #ifndef __CM4_REV - #define __CM4_REV 0x0000U - #warning "__CM4_REV not defined in device header file; using default!" - #endif - - #ifndef __FPU_PRESENT - #define __FPU_PRESENT 0U - #warning "__FPU_PRESENT not defined in device header file; using default!" - #endif - - #ifndef __MPU_PRESENT - #define __MPU_PRESENT 0U - #warning "__MPU_PRESENT not defined in device header file; using default!" - #endif - - #ifndef __NVIC_PRIO_BITS - #define __NVIC_PRIO_BITS 3U - #warning "__NVIC_PRIO_BITS not defined in device header file; using default!" - #endif - - #ifndef __Vendor_SysTickConfig - #define __Vendor_SysTickConfig 0U - #warning "__Vendor_SysTickConfig not defined in device header file; using default!" - #endif -#endif - -/* IO definitions (access restrictions to peripheral registers) */ -/** - \defgroup CMSIS_glob_defs CMSIS Global Defines - - IO Type Qualifiers are used - \li to specify the access to peripheral variables. - \li for automatic generation of peripheral register debug information. -*/ -#ifdef __cplusplus - #define __I volatile /*!< Defines 'read only' permissions */ -#else - #define __I volatile const /*!< Defines 'read only' permissions */ -#endif -#define __O volatile /*!< Defines 'write only' permissions */ -#define __IO volatile /*!< Defines 'read / write' permissions */ - -/* following defines should be used for structure members */ -#define __IM volatile const /*! Defines 'read only' structure member permissions */ -#define __OM volatile /*! Defines 'write only' structure member permissions */ -#define __IOM volatile /*! Defines 'read / write' structure member permissions */ - -/*@} end of group Cortex_M4 */ - - - -/******************************************************************************* - * Register Abstraction - Core Register contain: - - Core Register - - Core NVIC Register - - Core SCB Register - - Core SysTick Register - - Core Debug Register - - Core MPU Register - - Core FPU Register - ******************************************************************************/ -/** - \defgroup CMSIS_core_register Defines and Type Definitions - \brief Type definitions and defines for Cortex-M processor based devices. -*/ - -/** - \ingroup CMSIS_core_register - \defgroup CMSIS_CORE Status and Control Registers - \brief Core Register type definitions. - @{ - */ - -/** - \brief Union type to access the Application Program Status Register (APSR). - */ -typedef union -{ - struct - { - uint32_t _reserved0:16; /*!< bit: 0..15 Reserved */ - uint32_t GE:4; /*!< bit: 16..19 Greater than or Equal flags */ - uint32_t _reserved1:7; /*!< bit: 20..26 Reserved */ - uint32_t Q:1; /*!< bit: 27 Saturation condition flag */ - uint32_t V:1; /*!< bit: 28 Overflow condition code flag */ - uint32_t C:1; /*!< bit: 29 Carry condition code flag */ - uint32_t Z:1; /*!< bit: 30 Zero condition code flag */ - uint32_t N:1; /*!< bit: 31 Negative condition code flag */ - } b; /*!< Structure used for bit access */ - uint32_t w; /*!< Type used for word access */ -} APSR_Type; - -/* APSR Register Definitions */ -#define APSR_N_Pos 31U /*!< APSR: N Position */ -#define APSR_N_Msk (1UL << APSR_N_Pos) /*!< APSR: N Mask */ - -#define APSR_Z_Pos 30U /*!< APSR: Z Position */ -#define APSR_Z_Msk (1UL << APSR_Z_Pos) /*!< APSR: Z Mask */ - -#define APSR_C_Pos 29U /*!< APSR: C Position */ -#define APSR_C_Msk (1UL << APSR_C_Pos) /*!< APSR: C Mask */ - -#define APSR_V_Pos 28U /*!< APSR: V Position */ -#define APSR_V_Msk (1UL << APSR_V_Pos) /*!< APSR: V Mask */ - -#define APSR_Q_Pos 27U /*!< APSR: Q Position */ -#define APSR_Q_Msk (1UL << APSR_Q_Pos) /*!< APSR: Q Mask */ - -#define APSR_GE_Pos 16U /*!< APSR: GE Position */ -#define APSR_GE_Msk (0xFUL << APSR_GE_Pos) /*!< APSR: GE Mask */ - - -/** - \brief Union type to access the Interrupt Program Status Register (IPSR). - */ -typedef union -{ - struct - { - uint32_t ISR:9; /*!< bit: 0.. 8 Exception number */ - uint32_t _reserved0:23; /*!< bit: 9..31 Reserved */ - } b; /*!< Structure used for bit access */ - uint32_t w; /*!< Type used for word access */ -} IPSR_Type; - -/* IPSR Register Definitions */ -#define IPSR_ISR_Pos 0U /*!< IPSR: ISR Position */ -#define IPSR_ISR_Msk (0x1FFUL /*<< IPSR_ISR_Pos*/) /*!< IPSR: ISR Mask */ - - -/** - \brief Union type to access the Special-Purpose Program Status Registers (xPSR). - */ -typedef union -{ - struct - { - uint32_t ISR:9; /*!< bit: 0.. 8 Exception number */ - uint32_t _reserved0:1; /*!< bit: 9 Reserved */ - uint32_t ICI_IT_1:6; /*!< bit: 10..15 ICI/IT part 1 */ - uint32_t GE:4; /*!< bit: 16..19 Greater than or Equal flags */ - uint32_t _reserved1:4; /*!< bit: 20..23 Reserved */ - uint32_t T:1; /*!< bit: 24 Thumb bit */ - uint32_t ICI_IT_2:2; /*!< bit: 25..26 ICI/IT part 2 */ - uint32_t Q:1; /*!< bit: 27 Saturation condition flag */ - uint32_t V:1; /*!< bit: 28 Overflow condition code flag */ - uint32_t C:1; /*!< bit: 29 Carry condition code flag */ - uint32_t Z:1; /*!< bit: 30 Zero condition code flag */ - uint32_t N:1; /*!< bit: 31 Negative condition code flag */ - } b; /*!< Structure used for bit access */ - uint32_t w; /*!< Type used for word access */ -} xPSR_Type; - -/* xPSR Register Definitions */ -#define xPSR_N_Pos 31U /*!< xPSR: N Position */ -#define xPSR_N_Msk (1UL << xPSR_N_Pos) /*!< xPSR: N Mask */ - -#define xPSR_Z_Pos 30U /*!< xPSR: Z Position */ -#define xPSR_Z_Msk (1UL << xPSR_Z_Pos) /*!< xPSR: Z Mask */ - -#define xPSR_C_Pos 29U /*!< xPSR: C Position */ -#define xPSR_C_Msk (1UL << xPSR_C_Pos) /*!< xPSR: C Mask */ - -#define xPSR_V_Pos 28U /*!< xPSR: V Position */ -#define xPSR_V_Msk (1UL << xPSR_V_Pos) /*!< xPSR: V Mask */ - -#define xPSR_Q_Pos 27U /*!< xPSR: Q Position */ -#define xPSR_Q_Msk (1UL << xPSR_Q_Pos) /*!< xPSR: Q Mask */ - -#define xPSR_ICI_IT_2_Pos 25U /*!< xPSR: ICI/IT part 2 Position */ -#define xPSR_ICI_IT_2_Msk (3UL << xPSR_ICI_IT_2_Pos) /*!< xPSR: ICI/IT part 2 Mask */ - -#define xPSR_T_Pos 24U /*!< xPSR: T Position */ -#define xPSR_T_Msk (1UL << xPSR_T_Pos) /*!< xPSR: T Mask */ - -#define xPSR_GE_Pos 16U /*!< xPSR: GE Position */ -#define xPSR_GE_Msk (0xFUL << xPSR_GE_Pos) /*!< xPSR: GE Mask */ - -#define xPSR_ICI_IT_1_Pos 10U /*!< xPSR: ICI/IT part 1 Position */ -#define xPSR_ICI_IT_1_Msk (0x3FUL << xPSR_ICI_IT_1_Pos) /*!< xPSR: ICI/IT part 1 Mask */ - -#define xPSR_ISR_Pos 0U /*!< xPSR: ISR Position */ -#define xPSR_ISR_Msk (0x1FFUL /*<< xPSR_ISR_Pos*/) /*!< xPSR: ISR Mask */ - - -/** - \brief Union type to access the Control Registers (CONTROL). - */ -typedef union -{ - struct - { - uint32_t nPRIV:1; /*!< bit: 0 Execution privilege in Thread mode */ - uint32_t SPSEL:1; /*!< bit: 1 Stack to be used */ - uint32_t FPCA:1; /*!< bit: 2 FP extension active flag */ - uint32_t _reserved0:29; /*!< bit: 3..31 Reserved */ - } b; /*!< Structure used for bit access */ - uint32_t w; /*!< Type used for word access */ -} CONTROL_Type; - -/* CONTROL Register Definitions */ -#define CONTROL_FPCA_Pos 2U /*!< CONTROL: FPCA Position */ -#define CONTROL_FPCA_Msk (1UL << CONTROL_FPCA_Pos) /*!< CONTROL: FPCA Mask */ - -#define CONTROL_SPSEL_Pos 1U /*!< CONTROL: SPSEL Position */ -#define CONTROL_SPSEL_Msk (1UL << CONTROL_SPSEL_Pos) /*!< CONTROL: SPSEL Mask */ - -#define CONTROL_nPRIV_Pos 0U /*!< CONTROL: nPRIV Position */ -#define CONTROL_nPRIV_Msk (1UL /*<< CONTROL_nPRIV_Pos*/) /*!< CONTROL: nPRIV Mask */ - -/*@} end of group CMSIS_CORE */ - - -/** - \ingroup CMSIS_core_register - \defgroup CMSIS_NVIC Nested Vectored Interrupt Controller (NVIC) - \brief Type definitions for the NVIC Registers - @{ - */ - -/** - \brief Structure type to access the Nested Vectored Interrupt Controller (NVIC). - */ -typedef struct -{ - __IOM uint32_t ISER[8U]; /*!< Offset: 0x000 (R/W) Interrupt Set Enable Register */ - uint32_t RESERVED0[24U]; - __IOM uint32_t ICER[8U]; /*!< Offset: 0x080 (R/W) Interrupt Clear Enable Register */ - uint32_t RSERVED1[24U]; - __IOM uint32_t ISPR[8U]; /*!< Offset: 0x100 (R/W) Interrupt Set Pending Register */ - uint32_t RESERVED2[24U]; - __IOM uint32_t ICPR[8U]; /*!< Offset: 0x180 (R/W) Interrupt Clear Pending Register */ - uint32_t RESERVED3[24U]; - __IOM uint32_t IABR[8U]; /*!< Offset: 0x200 (R/W) Interrupt Active bit Register */ - uint32_t RESERVED4[56U]; - __IOM uint8_t IP[240U]; /*!< Offset: 0x300 (R/W) Interrupt Priority Register (8Bit wide) */ - uint32_t RESERVED5[644U]; - __OM uint32_t STIR; /*!< Offset: 0xE00 ( /W) Software Trigger Interrupt Register */ -} NVIC_Type; - -/* Software Triggered Interrupt Register Definitions */ -#define NVIC_STIR_INTID_Pos 0U /*!< STIR: INTLINESNUM Position */ -#define NVIC_STIR_INTID_Msk (0x1FFUL /*<< NVIC_STIR_INTID_Pos*/) /*!< STIR: INTLINESNUM Mask */ - -/*@} end of group CMSIS_NVIC */ - - -/** - \ingroup CMSIS_core_register - \defgroup CMSIS_SCB System Control Block (SCB) - \brief Type definitions for the System Control Block Registers - @{ - */ - -/** - \brief Structure type to access the System Control Block (SCB). - */ -typedef struct -{ - __IM uint32_t CPUID; /*!< Offset: 0x000 (R/ ) CPUID Base Register */ - __IOM uint32_t ICSR; /*!< Offset: 0x004 (R/W) Interrupt Control and State Register */ - __IOM uint32_t VTOR; /*!< Offset: 0x008 (R/W) Vector Table Offset Register */ - __IOM uint32_t AIRCR; /*!< Offset: 0x00C (R/W) Application Interrupt and Reset Control Register */ - __IOM uint32_t SCR; /*!< Offset: 0x010 (R/W) System Control Register */ - __IOM uint32_t CCR; /*!< Offset: 0x014 (R/W) Configuration Control Register */ - __IOM uint8_t SHP[12U]; /*!< Offset: 0x018 (R/W) System Handlers Priority Registers (4-7, 8-11, 12-15) */ - __IOM uint32_t SHCSR; /*!< Offset: 0x024 (R/W) System Handler Control and State Register */ - __IOM uint32_t CFSR; /*!< Offset: 0x028 (R/W) Configurable Fault Status Register */ - __IOM uint32_t HFSR; /*!< Offset: 0x02C (R/W) HardFault Status Register */ - __IOM uint32_t DFSR; /*!< Offset: 0x030 (R/W) Debug Fault Status Register */ - __IOM uint32_t MMFAR; /*!< Offset: 0x034 (R/W) MemManage Fault Address Register */ - __IOM uint32_t BFAR; /*!< Offset: 0x038 (R/W) BusFault Address Register */ - __IOM uint32_t AFSR; /*!< Offset: 0x03C (R/W) Auxiliary Fault Status Register */ - __IM uint32_t PFR[2U]; /*!< Offset: 0x040 (R/ ) Processor Feature Register */ - __IM uint32_t DFR; /*!< Offset: 0x048 (R/ ) Debug Feature Register */ - __IM uint32_t ADR; /*!< Offset: 0x04C (R/ ) Auxiliary Feature Register */ - __IM uint32_t MMFR[4U]; /*!< Offset: 0x050 (R/ ) Memory Model Feature Register */ - __IM uint32_t ISAR[5U]; /*!< Offset: 0x060 (R/ ) Instruction Set Attributes Register */ - uint32_t RESERVED0[5U]; - __IOM uint32_t CPACR; /*!< Offset: 0x088 (R/W) Coprocessor Access Control Register */ -} SCB_Type; - -/* SCB CPUID Register Definitions */ -#define SCB_CPUID_IMPLEMENTER_Pos 24U /*!< SCB CPUID: IMPLEMENTER Position */ -#define SCB_CPUID_IMPLEMENTER_Msk (0xFFUL << SCB_CPUID_IMPLEMENTER_Pos) /*!< SCB CPUID: IMPLEMENTER Mask */ - -#define SCB_CPUID_VARIANT_Pos 20U /*!< SCB CPUID: VARIANT Position */ -#define SCB_CPUID_VARIANT_Msk (0xFUL << SCB_CPUID_VARIANT_Pos) /*!< SCB CPUID: VARIANT Mask */ - -#define SCB_CPUID_ARCHITECTURE_Pos 16U /*!< SCB CPUID: ARCHITECTURE Position */ -#define SCB_CPUID_ARCHITECTURE_Msk (0xFUL << SCB_CPUID_ARCHITECTURE_Pos) /*!< SCB CPUID: ARCHITECTURE Mask */ - -#define SCB_CPUID_PARTNO_Pos 4U /*!< SCB CPUID: PARTNO Position */ -#define SCB_CPUID_PARTNO_Msk (0xFFFUL << SCB_CPUID_PARTNO_Pos) /*!< SCB CPUID: PARTNO Mask */ - -#define SCB_CPUID_REVISION_Pos 0U /*!< SCB CPUID: REVISION Position */ -#define SCB_CPUID_REVISION_Msk (0xFUL /*<< SCB_CPUID_REVISION_Pos*/) /*!< SCB CPUID: REVISION Mask */ - -/* SCB Interrupt Control State Register Definitions */ -#define SCB_ICSR_NMIPENDSET_Pos 31U /*!< SCB ICSR: NMIPENDSET Position */ -#define SCB_ICSR_NMIPENDSET_Msk (1UL << SCB_ICSR_NMIPENDSET_Pos) /*!< SCB ICSR: NMIPENDSET Mask */ - -#define SCB_ICSR_PENDSVSET_Pos 28U /*!< SCB ICSR: PENDSVSET Position */ -#define SCB_ICSR_PENDSVSET_Msk (1UL << SCB_ICSR_PENDSVSET_Pos) /*!< SCB ICSR: PENDSVSET Mask */ - -#define SCB_ICSR_PENDSVCLR_Pos 27U /*!< SCB ICSR: PENDSVCLR Position */ -#define SCB_ICSR_PENDSVCLR_Msk (1UL << SCB_ICSR_PENDSVCLR_Pos) /*!< SCB ICSR: PENDSVCLR Mask */ - -#define SCB_ICSR_PENDSTSET_Pos 26U /*!< SCB ICSR: PENDSTSET Position */ -#define SCB_ICSR_PENDSTSET_Msk (1UL << SCB_ICSR_PENDSTSET_Pos) /*!< SCB ICSR: PENDSTSET Mask */ - -#define SCB_ICSR_PENDSTCLR_Pos 25U /*!< SCB ICSR: PENDSTCLR Position */ -#define SCB_ICSR_PENDSTCLR_Msk (1UL << SCB_ICSR_PENDSTCLR_Pos) /*!< SCB ICSR: PENDSTCLR Mask */ - -#define SCB_ICSR_ISRPREEMPT_Pos 23U /*!< SCB ICSR: ISRPREEMPT Position */ -#define SCB_ICSR_ISRPREEMPT_Msk (1UL << SCB_ICSR_ISRPREEMPT_Pos) /*!< SCB ICSR: ISRPREEMPT Mask */ - -#define SCB_ICSR_ISRPENDING_Pos 22U /*!< SCB ICSR: ISRPENDING Position */ -#define SCB_ICSR_ISRPENDING_Msk (1UL << SCB_ICSR_ISRPENDING_Pos) /*!< SCB ICSR: ISRPENDING Mask */ - -#define SCB_ICSR_VECTPENDING_Pos 12U /*!< SCB ICSR: VECTPENDING Position */ -#define SCB_ICSR_VECTPENDING_Msk (0x1FFUL << SCB_ICSR_VECTPENDING_Pos) /*!< SCB ICSR: VECTPENDING Mask */ - -#define SCB_ICSR_RETTOBASE_Pos 11U /*!< SCB ICSR: RETTOBASE Position */ -#define SCB_ICSR_RETTOBASE_Msk (1UL << SCB_ICSR_RETTOBASE_Pos) /*!< SCB ICSR: RETTOBASE Mask */ - -#define SCB_ICSR_VECTACTIVE_Pos 0U /*!< SCB ICSR: VECTACTIVE Position */ -#define SCB_ICSR_VECTACTIVE_Msk (0x1FFUL /*<< SCB_ICSR_VECTACTIVE_Pos*/) /*!< SCB ICSR: VECTACTIVE Mask */ - -/* SCB Vector Table Offset Register Definitions */ -#define SCB_VTOR_TBLOFF_Pos 7U /*!< SCB VTOR: TBLOFF Position */ -#define SCB_VTOR_TBLOFF_Msk (0x1FFFFFFUL << SCB_VTOR_TBLOFF_Pos) /*!< SCB VTOR: TBLOFF Mask */ - -/* SCB Application Interrupt and Reset Control Register Definitions */ -#define SCB_AIRCR_VECTKEY_Pos 16U /*!< SCB AIRCR: VECTKEY Position */ -#define SCB_AIRCR_VECTKEY_Msk (0xFFFFUL << SCB_AIRCR_VECTKEY_Pos) /*!< SCB AIRCR: VECTKEY Mask */ - -#define SCB_AIRCR_VECTKEYSTAT_Pos 16U /*!< SCB AIRCR: VECTKEYSTAT Position */ -#define SCB_AIRCR_VECTKEYSTAT_Msk (0xFFFFUL << SCB_AIRCR_VECTKEYSTAT_Pos) /*!< SCB AIRCR: VECTKEYSTAT Mask */ - -#define SCB_AIRCR_ENDIANESS_Pos 15U /*!< SCB AIRCR: ENDIANESS Position */ -#define SCB_AIRCR_ENDIANESS_Msk (1UL << SCB_AIRCR_ENDIANESS_Pos) /*!< SCB AIRCR: ENDIANESS Mask */ - -#define SCB_AIRCR_PRIGROUP_Pos 8U /*!< SCB AIRCR: PRIGROUP Position */ -#define SCB_AIRCR_PRIGROUP_Msk (7UL << SCB_AIRCR_PRIGROUP_Pos) /*!< SCB AIRCR: PRIGROUP Mask */ - -#define SCB_AIRCR_SYSRESETREQ_Pos 2U /*!< SCB AIRCR: SYSRESETREQ Position */ -#define SCB_AIRCR_SYSRESETREQ_Msk (1UL << SCB_AIRCR_SYSRESETREQ_Pos) /*!< SCB AIRCR: SYSRESETREQ Mask */ - -#define SCB_AIRCR_VECTCLRACTIVE_Pos 1U /*!< SCB AIRCR: VECTCLRACTIVE Position */ -#define SCB_AIRCR_VECTCLRACTIVE_Msk (1UL << SCB_AIRCR_VECTCLRACTIVE_Pos) /*!< SCB AIRCR: VECTCLRACTIVE Mask */ - -#define SCB_AIRCR_VECTRESET_Pos 0U /*!< SCB AIRCR: VECTRESET Position */ -#define SCB_AIRCR_VECTRESET_Msk (1UL /*<< SCB_AIRCR_VECTRESET_Pos*/) /*!< SCB AIRCR: VECTRESET Mask */ - -/* SCB System Control Register Definitions */ -#define SCB_SCR_SEVONPEND_Pos 4U /*!< SCB SCR: SEVONPEND Position */ -#define SCB_SCR_SEVONPEND_Msk (1UL << SCB_SCR_SEVONPEND_Pos) /*!< SCB SCR: SEVONPEND Mask */ - -#define SCB_SCR_SLEEPDEEP_Pos 2U /*!< SCB SCR: SLEEPDEEP Position */ -#define SCB_SCR_SLEEPDEEP_Msk (1UL << SCB_SCR_SLEEPDEEP_Pos) /*!< SCB SCR: SLEEPDEEP Mask */ - -#define SCB_SCR_SLEEPONEXIT_Pos 1U /*!< SCB SCR: SLEEPONEXIT Position */ -#define SCB_SCR_SLEEPONEXIT_Msk (1UL << SCB_SCR_SLEEPONEXIT_Pos) /*!< SCB SCR: SLEEPONEXIT Mask */ - -/* SCB Configuration Control Register Definitions */ -#define SCB_CCR_STKALIGN_Pos 9U /*!< SCB CCR: STKALIGN Position */ -#define SCB_CCR_STKALIGN_Msk (1UL << SCB_CCR_STKALIGN_Pos) /*!< SCB CCR: STKALIGN Mask */ - -#define SCB_CCR_BFHFNMIGN_Pos 8U /*!< SCB CCR: BFHFNMIGN Position */ -#define SCB_CCR_BFHFNMIGN_Msk (1UL << SCB_CCR_BFHFNMIGN_Pos) /*!< SCB CCR: BFHFNMIGN Mask */ - -#define SCB_CCR_DIV_0_TRP_Pos 4U /*!< SCB CCR: DIV_0_TRP Position */ -#define SCB_CCR_DIV_0_TRP_Msk (1UL << SCB_CCR_DIV_0_TRP_Pos) /*!< SCB CCR: DIV_0_TRP Mask */ - -#define SCB_CCR_UNALIGN_TRP_Pos 3U /*!< SCB CCR: UNALIGN_TRP Position */ -#define SCB_CCR_UNALIGN_TRP_Msk (1UL << SCB_CCR_UNALIGN_TRP_Pos) /*!< SCB CCR: UNALIGN_TRP Mask */ - -#define SCB_CCR_USERSETMPEND_Pos 1U /*!< SCB CCR: USERSETMPEND Position */ -#define SCB_CCR_USERSETMPEND_Msk (1UL << SCB_CCR_USERSETMPEND_Pos) /*!< SCB CCR: USERSETMPEND Mask */ - -#define SCB_CCR_NONBASETHRDENA_Pos 0U /*!< SCB CCR: NONBASETHRDENA Position */ -#define SCB_CCR_NONBASETHRDENA_Msk (1UL /*<< SCB_CCR_NONBASETHRDENA_Pos*/) /*!< SCB CCR: NONBASETHRDENA Mask */ - -/* SCB System Handler Control and State Register Definitions */ -#define SCB_SHCSR_USGFAULTENA_Pos 18U /*!< SCB SHCSR: USGFAULTENA Position */ -#define SCB_SHCSR_USGFAULTENA_Msk (1UL << SCB_SHCSR_USGFAULTENA_Pos) /*!< SCB SHCSR: USGFAULTENA Mask */ - -#define SCB_SHCSR_BUSFAULTENA_Pos 17U /*!< SCB SHCSR: BUSFAULTENA Position */ -#define SCB_SHCSR_BUSFAULTENA_Msk (1UL << SCB_SHCSR_BUSFAULTENA_Pos) /*!< SCB SHCSR: BUSFAULTENA Mask */ - -#define SCB_SHCSR_MEMFAULTENA_Pos 16U /*!< SCB SHCSR: MEMFAULTENA Position */ -#define SCB_SHCSR_MEMFAULTENA_Msk (1UL << SCB_SHCSR_MEMFAULTENA_Pos) /*!< SCB SHCSR: MEMFAULTENA Mask */ - -#define SCB_SHCSR_SVCALLPENDED_Pos 15U /*!< SCB SHCSR: SVCALLPENDED Position */ -#define SCB_SHCSR_SVCALLPENDED_Msk (1UL << SCB_SHCSR_SVCALLPENDED_Pos) /*!< SCB SHCSR: SVCALLPENDED Mask */ - -#define SCB_SHCSR_BUSFAULTPENDED_Pos 14U /*!< SCB SHCSR: BUSFAULTPENDED Position */ -#define SCB_SHCSR_BUSFAULTPENDED_Msk (1UL << SCB_SHCSR_BUSFAULTPENDED_Pos) /*!< SCB SHCSR: BUSFAULTPENDED Mask */ - -#define SCB_SHCSR_MEMFAULTPENDED_Pos 13U /*!< SCB SHCSR: MEMFAULTPENDED Position */ -#define SCB_SHCSR_MEMFAULTPENDED_Msk (1UL << SCB_SHCSR_MEMFAULTPENDED_Pos) /*!< SCB SHCSR: MEMFAULTPENDED Mask */ - -#define SCB_SHCSR_USGFAULTPENDED_Pos 12U /*!< SCB SHCSR: USGFAULTPENDED Position */ -#define SCB_SHCSR_USGFAULTPENDED_Msk (1UL << SCB_SHCSR_USGFAULTPENDED_Pos) /*!< SCB SHCSR: USGFAULTPENDED Mask */ - -#define SCB_SHCSR_SYSTICKACT_Pos 11U /*!< SCB SHCSR: SYSTICKACT Position */ -#define SCB_SHCSR_SYSTICKACT_Msk (1UL << SCB_SHCSR_SYSTICKACT_Pos) /*!< SCB SHCSR: SYSTICKACT Mask */ - -#define SCB_SHCSR_PENDSVACT_Pos 10U /*!< SCB SHCSR: PENDSVACT Position */ -#define SCB_SHCSR_PENDSVACT_Msk (1UL << SCB_SHCSR_PENDSVACT_Pos) /*!< SCB SHCSR: PENDSVACT Mask */ - -#define SCB_SHCSR_MONITORACT_Pos 8U /*!< SCB SHCSR: MONITORACT Position */ -#define SCB_SHCSR_MONITORACT_Msk (1UL << SCB_SHCSR_MONITORACT_Pos) /*!< SCB SHCSR: MONITORACT Mask */ - -#define SCB_SHCSR_SVCALLACT_Pos 7U /*!< SCB SHCSR: SVCALLACT Position */ -#define SCB_SHCSR_SVCALLACT_Msk (1UL << SCB_SHCSR_SVCALLACT_Pos) /*!< SCB SHCSR: SVCALLACT Mask */ - -#define SCB_SHCSR_USGFAULTACT_Pos 3U /*!< SCB SHCSR: USGFAULTACT Position */ -#define SCB_SHCSR_USGFAULTACT_Msk (1UL << SCB_SHCSR_USGFAULTACT_Pos) /*!< SCB SHCSR: USGFAULTACT Mask */ - -#define SCB_SHCSR_BUSFAULTACT_Pos 1U /*!< SCB SHCSR: BUSFAULTACT Position */ -#define SCB_SHCSR_BUSFAULTACT_Msk (1UL << SCB_SHCSR_BUSFAULTACT_Pos) /*!< SCB SHCSR: BUSFAULTACT Mask */ - -#define SCB_SHCSR_MEMFAULTACT_Pos 0U /*!< SCB SHCSR: MEMFAULTACT Position */ -#define SCB_SHCSR_MEMFAULTACT_Msk (1UL /*<< SCB_SHCSR_MEMFAULTACT_Pos*/) /*!< SCB SHCSR: MEMFAULTACT Mask */ - -/* SCB Configurable Fault Status Register Definitions */ -#define SCB_CFSR_USGFAULTSR_Pos 16U /*!< SCB CFSR: Usage Fault Status Register Position */ -#define SCB_CFSR_USGFAULTSR_Msk (0xFFFFUL << SCB_CFSR_USGFAULTSR_Pos) /*!< SCB CFSR: Usage Fault Status Register Mask */ - -#define SCB_CFSR_BUSFAULTSR_Pos 8U /*!< SCB CFSR: Bus Fault Status Register Position */ -#define SCB_CFSR_BUSFAULTSR_Msk (0xFFUL << SCB_CFSR_BUSFAULTSR_Pos) /*!< SCB CFSR: Bus Fault Status Register Mask */ - -#define SCB_CFSR_MEMFAULTSR_Pos 0U /*!< SCB CFSR: Memory Manage Fault Status Register Position */ -#define SCB_CFSR_MEMFAULTSR_Msk (0xFFUL /*<< SCB_CFSR_MEMFAULTSR_Pos*/) /*!< SCB CFSR: Memory Manage Fault Status Register Mask */ - -/* MemManage Fault Status Register (part of SCB Configurable Fault Status Register) */ -#define SCB_CFSR_MMARVALID_Pos (SCB_SHCSR_MEMFAULTACT_Pos + 7U) /*!< SCB CFSR (MMFSR): MMARVALID Position */ -#define SCB_CFSR_MMARVALID_Msk (1UL << SCB_CFSR_MMARVALID_Pos) /*!< SCB CFSR (MMFSR): MMARVALID Mask */ - -#define SCB_CFSR_MLSPERR_Pos (SCB_SHCSR_MEMFAULTACT_Pos + 5U) /*!< SCB CFSR (MMFSR): MLSPERR Position */ -#define SCB_CFSR_MLSPERR_Msk (1UL << SCB_CFSR_MLSPERR_Pos) /*!< SCB CFSR (MMFSR): MLSPERR Mask */ - -#define SCB_CFSR_MSTKERR_Pos (SCB_SHCSR_MEMFAULTACT_Pos + 4U) /*!< SCB CFSR (MMFSR): MSTKERR Position */ -#define SCB_CFSR_MSTKERR_Msk (1UL << SCB_CFSR_MSTKERR_Pos) /*!< SCB CFSR (MMFSR): MSTKERR Mask */ - -#define SCB_CFSR_MUNSTKERR_Pos (SCB_SHCSR_MEMFAULTACT_Pos + 3U) /*!< SCB CFSR (MMFSR): MUNSTKERR Position */ -#define SCB_CFSR_MUNSTKERR_Msk (1UL << SCB_CFSR_MUNSTKERR_Pos) /*!< SCB CFSR (MMFSR): MUNSTKERR Mask */ - -#define SCB_CFSR_DACCVIOL_Pos (SCB_SHCSR_MEMFAULTACT_Pos + 1U) /*!< SCB CFSR (MMFSR): DACCVIOL Position */ -#define SCB_CFSR_DACCVIOL_Msk (1UL << SCB_CFSR_DACCVIOL_Pos) /*!< SCB CFSR (MMFSR): DACCVIOL Mask */ - -#define SCB_CFSR_IACCVIOL_Pos (SCB_SHCSR_MEMFAULTACT_Pos + 0U) /*!< SCB CFSR (MMFSR): IACCVIOL Position */ -#define SCB_CFSR_IACCVIOL_Msk (1UL /*<< SCB_CFSR_IACCVIOL_Pos*/) /*!< SCB CFSR (MMFSR): IACCVIOL Mask */ - -/* BusFault Status Register (part of SCB Configurable Fault Status Register) */ -#define SCB_CFSR_BFARVALID_Pos (SCB_CFSR_BUSFAULTSR_Pos + 7U) /*!< SCB CFSR (BFSR): BFARVALID Position */ -#define SCB_CFSR_BFARVALID_Msk (1UL << SCB_CFSR_BFARVALID_Pos) /*!< SCB CFSR (BFSR): BFARVALID Mask */ - -#define SCB_CFSR_LSPERR_Pos (SCB_CFSR_BUSFAULTSR_Pos + 5U) /*!< SCB CFSR (BFSR): LSPERR Position */ -#define SCB_CFSR_LSPERR_Msk (1UL << SCB_CFSR_LSPERR_Pos) /*!< SCB CFSR (BFSR): LSPERR Mask */ - -#define SCB_CFSR_STKERR_Pos (SCB_CFSR_BUSFAULTSR_Pos + 4U) /*!< SCB CFSR (BFSR): STKERR Position */ -#define SCB_CFSR_STKERR_Msk (1UL << SCB_CFSR_STKERR_Pos) /*!< SCB CFSR (BFSR): STKERR Mask */ - -#define SCB_CFSR_UNSTKERR_Pos (SCB_CFSR_BUSFAULTSR_Pos + 3U) /*!< SCB CFSR (BFSR): UNSTKERR Position */ -#define SCB_CFSR_UNSTKERR_Msk (1UL << SCB_CFSR_UNSTKERR_Pos) /*!< SCB CFSR (BFSR): UNSTKERR Mask */ - -#define SCB_CFSR_IMPRECISERR_Pos (SCB_CFSR_BUSFAULTSR_Pos + 2U) /*!< SCB CFSR (BFSR): IMPRECISERR Position */ -#define SCB_CFSR_IMPRECISERR_Msk (1UL << SCB_CFSR_IMPRECISERR_Pos) /*!< SCB CFSR (BFSR): IMPRECISERR Mask */ - -#define SCB_CFSR_PRECISERR_Pos (SCB_CFSR_BUSFAULTSR_Pos + 1U) /*!< SCB CFSR (BFSR): PRECISERR Position */ -#define SCB_CFSR_PRECISERR_Msk (1UL << SCB_CFSR_PRECISERR_Pos) /*!< SCB CFSR (BFSR): PRECISERR Mask */ - -#define SCB_CFSR_IBUSERR_Pos (SCB_CFSR_BUSFAULTSR_Pos + 0U) /*!< SCB CFSR (BFSR): IBUSERR Position */ -#define SCB_CFSR_IBUSERR_Msk (1UL << SCB_CFSR_IBUSERR_Pos) /*!< SCB CFSR (BFSR): IBUSERR Mask */ - -/* UsageFault Status Register (part of SCB Configurable Fault Status Register) */ -#define SCB_CFSR_DIVBYZERO_Pos (SCB_CFSR_USGFAULTSR_Pos + 9U) /*!< SCB CFSR (UFSR): DIVBYZERO Position */ -#define SCB_CFSR_DIVBYZERO_Msk (1UL << SCB_CFSR_DIVBYZERO_Pos) /*!< SCB CFSR (UFSR): DIVBYZERO Mask */ - -#define SCB_CFSR_UNALIGNED_Pos (SCB_CFSR_USGFAULTSR_Pos + 8U) /*!< SCB CFSR (UFSR): UNALIGNED Position */ -#define SCB_CFSR_UNALIGNED_Msk (1UL << SCB_CFSR_UNALIGNED_Pos) /*!< SCB CFSR (UFSR): UNALIGNED Mask */ - -#define SCB_CFSR_NOCP_Pos (SCB_CFSR_USGFAULTSR_Pos + 3U) /*!< SCB CFSR (UFSR): NOCP Position */ -#define SCB_CFSR_NOCP_Msk (1UL << SCB_CFSR_NOCP_Pos) /*!< SCB CFSR (UFSR): NOCP Mask */ - -#define SCB_CFSR_INVPC_Pos (SCB_CFSR_USGFAULTSR_Pos + 2U) /*!< SCB CFSR (UFSR): INVPC Position */ -#define SCB_CFSR_INVPC_Msk (1UL << SCB_CFSR_INVPC_Pos) /*!< SCB CFSR (UFSR): INVPC Mask */ - -#define SCB_CFSR_INVSTATE_Pos (SCB_CFSR_USGFAULTSR_Pos + 1U) /*!< SCB CFSR (UFSR): INVSTATE Position */ -#define SCB_CFSR_INVSTATE_Msk (1UL << SCB_CFSR_INVSTATE_Pos) /*!< SCB CFSR (UFSR): INVSTATE Mask */ - -#define SCB_CFSR_UNDEFINSTR_Pos (SCB_CFSR_USGFAULTSR_Pos + 0U) /*!< SCB CFSR (UFSR): UNDEFINSTR Position */ -#define SCB_CFSR_UNDEFINSTR_Msk (1UL << SCB_CFSR_UNDEFINSTR_Pos) /*!< SCB CFSR (UFSR): UNDEFINSTR Mask */ - -/* SCB Hard Fault Status Register Definitions */ -#define SCB_HFSR_DEBUGEVT_Pos 31U /*!< SCB HFSR: DEBUGEVT Position */ -#define SCB_HFSR_DEBUGEVT_Msk (1UL << SCB_HFSR_DEBUGEVT_Pos) /*!< SCB HFSR: DEBUGEVT Mask */ - -#define SCB_HFSR_FORCED_Pos 30U /*!< SCB HFSR: FORCED Position */ -#define SCB_HFSR_FORCED_Msk (1UL << SCB_HFSR_FORCED_Pos) /*!< SCB HFSR: FORCED Mask */ - -#define SCB_HFSR_VECTTBL_Pos 1U /*!< SCB HFSR: VECTTBL Position */ -#define SCB_HFSR_VECTTBL_Msk (1UL << SCB_HFSR_VECTTBL_Pos) /*!< SCB HFSR: VECTTBL Mask */ - -/* SCB Debug Fault Status Register Definitions */ -#define SCB_DFSR_EXTERNAL_Pos 4U /*!< SCB DFSR: EXTERNAL Position */ -#define SCB_DFSR_EXTERNAL_Msk (1UL << SCB_DFSR_EXTERNAL_Pos) /*!< SCB DFSR: EXTERNAL Mask */ - -#define SCB_DFSR_VCATCH_Pos 3U /*!< SCB DFSR: VCATCH Position */ -#define SCB_DFSR_VCATCH_Msk (1UL << SCB_DFSR_VCATCH_Pos) /*!< SCB DFSR: VCATCH Mask */ - -#define SCB_DFSR_DWTTRAP_Pos 2U /*!< SCB DFSR: DWTTRAP Position */ -#define SCB_DFSR_DWTTRAP_Msk (1UL << SCB_DFSR_DWTTRAP_Pos) /*!< SCB DFSR: DWTTRAP Mask */ - -#define SCB_DFSR_BKPT_Pos 1U /*!< SCB DFSR: BKPT Position */ -#define SCB_DFSR_BKPT_Msk (1UL << SCB_DFSR_BKPT_Pos) /*!< SCB DFSR: BKPT Mask */ - -#define SCB_DFSR_HALTED_Pos 0U /*!< SCB DFSR: HALTED Position */ -#define SCB_DFSR_HALTED_Msk (1UL /*<< SCB_DFSR_HALTED_Pos*/) /*!< SCB DFSR: HALTED Mask */ - -/*@} end of group CMSIS_SCB */ - - -/** - \ingroup CMSIS_core_register - \defgroup CMSIS_SCnSCB System Controls not in SCB (SCnSCB) - \brief Type definitions for the System Control and ID Register not in the SCB - @{ - */ - -/** - \brief Structure type to access the System Control and ID Register not in the SCB. - */ -typedef struct -{ - uint32_t RESERVED0[1U]; - __IM uint32_t ICTR; /*!< Offset: 0x004 (R/ ) Interrupt Controller Type Register */ - __IOM uint32_t ACTLR; /*!< Offset: 0x008 (R/W) Auxiliary Control Register */ -} SCnSCB_Type; - -/* Interrupt Controller Type Register Definitions */ -#define SCnSCB_ICTR_INTLINESNUM_Pos 0U /*!< ICTR: INTLINESNUM Position */ -#define SCnSCB_ICTR_INTLINESNUM_Msk (0xFUL /*<< SCnSCB_ICTR_INTLINESNUM_Pos*/) /*!< ICTR: INTLINESNUM Mask */ - -/* Auxiliary Control Register Definitions */ -#define SCnSCB_ACTLR_DISOOFP_Pos 9U /*!< ACTLR: DISOOFP Position */ -#define SCnSCB_ACTLR_DISOOFP_Msk (1UL << SCnSCB_ACTLR_DISOOFP_Pos) /*!< ACTLR: DISOOFP Mask */ - -#define SCnSCB_ACTLR_DISFPCA_Pos 8U /*!< ACTLR: DISFPCA Position */ -#define SCnSCB_ACTLR_DISFPCA_Msk (1UL << SCnSCB_ACTLR_DISFPCA_Pos) /*!< ACTLR: DISFPCA Mask */ - -#define SCnSCB_ACTLR_DISFOLD_Pos 2U /*!< ACTLR: DISFOLD Position */ -#define SCnSCB_ACTLR_DISFOLD_Msk (1UL << SCnSCB_ACTLR_DISFOLD_Pos) /*!< ACTLR: DISFOLD Mask */ - -#define SCnSCB_ACTLR_DISDEFWBUF_Pos 1U /*!< ACTLR: DISDEFWBUF Position */ -#define SCnSCB_ACTLR_DISDEFWBUF_Msk (1UL << SCnSCB_ACTLR_DISDEFWBUF_Pos) /*!< ACTLR: DISDEFWBUF Mask */ - -#define SCnSCB_ACTLR_DISMCYCINT_Pos 0U /*!< ACTLR: DISMCYCINT Position */ -#define SCnSCB_ACTLR_DISMCYCINT_Msk (1UL /*<< SCnSCB_ACTLR_DISMCYCINT_Pos*/) /*!< ACTLR: DISMCYCINT Mask */ - -/*@} end of group CMSIS_SCnotSCB */ - - -/** - \ingroup CMSIS_core_register - \defgroup CMSIS_SysTick System Tick Timer (SysTick) - \brief Type definitions for the System Timer Registers. - @{ - */ - -/** - \brief Structure type to access the System Timer (SysTick). - */ -typedef struct -{ - __IOM uint32_t CTRL; /*!< Offset: 0x000 (R/W) SysTick Control and Status Register */ - __IOM uint32_t LOAD; /*!< Offset: 0x004 (R/W) SysTick Reload Value Register */ - __IOM uint32_t VAL; /*!< Offset: 0x008 (R/W) SysTick Current Value Register */ - __IM uint32_t CALIB; /*!< Offset: 0x00C (R/ ) SysTick Calibration Register */ -} SysTick_Type; - -/* SysTick Control / Status Register Definitions */ -#define SysTick_CTRL_COUNTFLAG_Pos 16U /*!< SysTick CTRL: COUNTFLAG Position */ -#define SysTick_CTRL_COUNTFLAG_Msk (1UL << SysTick_CTRL_COUNTFLAG_Pos) /*!< SysTick CTRL: COUNTFLAG Mask */ - -#define SysTick_CTRL_CLKSOURCE_Pos 2U /*!< SysTick CTRL: CLKSOURCE Position */ -#define SysTick_CTRL_CLKSOURCE_Msk (1UL << SysTick_CTRL_CLKSOURCE_Pos) /*!< SysTick CTRL: CLKSOURCE Mask */ - -#define SysTick_CTRL_TICKINT_Pos 1U /*!< SysTick CTRL: TICKINT Position */ -#define SysTick_CTRL_TICKINT_Msk (1UL << SysTick_CTRL_TICKINT_Pos) /*!< SysTick CTRL: TICKINT Mask */ - -#define SysTick_CTRL_ENABLE_Pos 0U /*!< SysTick CTRL: ENABLE Position */ -#define SysTick_CTRL_ENABLE_Msk (1UL /*<< SysTick_CTRL_ENABLE_Pos*/) /*!< SysTick CTRL: ENABLE Mask */ - -/* SysTick Reload Register Definitions */ -#define SysTick_LOAD_RELOAD_Pos 0U /*!< SysTick LOAD: RELOAD Position */ -#define SysTick_LOAD_RELOAD_Msk (0xFFFFFFUL /*<< SysTick_LOAD_RELOAD_Pos*/) /*!< SysTick LOAD: RELOAD Mask */ - -/* SysTick Current Register Definitions */ -#define SysTick_VAL_CURRENT_Pos 0U /*!< SysTick VAL: CURRENT Position */ -#define SysTick_VAL_CURRENT_Msk (0xFFFFFFUL /*<< SysTick_VAL_CURRENT_Pos*/) /*!< SysTick VAL: CURRENT Mask */ - -/* SysTick Calibration Register Definitions */ -#define SysTick_CALIB_NOREF_Pos 31U /*!< SysTick CALIB: NOREF Position */ -#define SysTick_CALIB_NOREF_Msk (1UL << SysTick_CALIB_NOREF_Pos) /*!< SysTick CALIB: NOREF Mask */ - -#define SysTick_CALIB_SKEW_Pos 30U /*!< SysTick CALIB: SKEW Position */ -#define SysTick_CALIB_SKEW_Msk (1UL << SysTick_CALIB_SKEW_Pos) /*!< SysTick CALIB: SKEW Mask */ - -#define SysTick_CALIB_TENMS_Pos 0U /*!< SysTick CALIB: TENMS Position */ -#define SysTick_CALIB_TENMS_Msk (0xFFFFFFUL /*<< SysTick_CALIB_TENMS_Pos*/) /*!< SysTick CALIB: TENMS Mask */ - -/*@} end of group CMSIS_SysTick */ - - -/** - \ingroup CMSIS_core_register - \defgroup CMSIS_ITM Instrumentation Trace Macrocell (ITM) - \brief Type definitions for the Instrumentation Trace Macrocell (ITM) - @{ - */ - -/** - \brief Structure type to access the Instrumentation Trace Macrocell Register (ITM). - */ -typedef struct -{ - __OM union - { - __OM uint8_t u8; /*!< Offset: 0x000 ( /W) ITM Stimulus Port 8-bit */ - __OM uint16_t u16; /*!< Offset: 0x000 ( /W) ITM Stimulus Port 16-bit */ - __OM uint32_t u32; /*!< Offset: 0x000 ( /W) ITM Stimulus Port 32-bit */ - } PORT [32U]; /*!< Offset: 0x000 ( /W) ITM Stimulus Port Registers */ - uint32_t RESERVED0[864U]; - __IOM uint32_t TER; /*!< Offset: 0xE00 (R/W) ITM Trace Enable Register */ - uint32_t RESERVED1[15U]; - __IOM uint32_t TPR; /*!< Offset: 0xE40 (R/W) ITM Trace Privilege Register */ - uint32_t RESERVED2[15U]; - __IOM uint32_t TCR; /*!< Offset: 0xE80 (R/W) ITM Trace Control Register */ - uint32_t RESERVED3[29U]; - __OM uint32_t IWR; /*!< Offset: 0xEF8 ( /W) ITM Integration Write Register */ - __IM uint32_t IRR; /*!< Offset: 0xEFC (R/ ) ITM Integration Read Register */ - __IOM uint32_t IMCR; /*!< Offset: 0xF00 (R/W) ITM Integration Mode Control Register */ - uint32_t RESERVED4[43U]; - __OM uint32_t LAR; /*!< Offset: 0xFB0 ( /W) ITM Lock Access Register */ - __IM uint32_t LSR; /*!< Offset: 0xFB4 (R/ ) ITM Lock Status Register */ - uint32_t RESERVED5[6U]; - __IM uint32_t PID4; /*!< Offset: 0xFD0 (R/ ) ITM Peripheral Identification Register #4 */ - __IM uint32_t PID5; /*!< Offset: 0xFD4 (R/ ) ITM Peripheral Identification Register #5 */ - __IM uint32_t PID6; /*!< Offset: 0xFD8 (R/ ) ITM Peripheral Identification Register #6 */ - __IM uint32_t PID7; /*!< Offset: 0xFDC (R/ ) ITM Peripheral Identification Register #7 */ - __IM uint32_t PID0; /*!< Offset: 0xFE0 (R/ ) ITM Peripheral Identification Register #0 */ - __IM uint32_t PID1; /*!< Offset: 0xFE4 (R/ ) ITM Peripheral Identification Register #1 */ - __IM uint32_t PID2; /*!< Offset: 0xFE8 (R/ ) ITM Peripheral Identification Register #2 */ - __IM uint32_t PID3; /*!< Offset: 0xFEC (R/ ) ITM Peripheral Identification Register #3 */ - __IM uint32_t CID0; /*!< Offset: 0xFF0 (R/ ) ITM Component Identification Register #0 */ - __IM uint32_t CID1; /*!< Offset: 0xFF4 (R/ ) ITM Component Identification Register #1 */ - __IM uint32_t CID2; /*!< Offset: 0xFF8 (R/ ) ITM Component Identification Register #2 */ - __IM uint32_t CID3; /*!< Offset: 0xFFC (R/ ) ITM Component Identification Register #3 */ -} ITM_Type; - -/* ITM Trace Privilege Register Definitions */ -#define ITM_TPR_PRIVMASK_Pos 0U /*!< ITM TPR: PRIVMASK Position */ -#define ITM_TPR_PRIVMASK_Msk (0xFFFFFFFFUL /*<< ITM_TPR_PRIVMASK_Pos*/) /*!< ITM TPR: PRIVMASK Mask */ - -/* ITM Trace Control Register Definitions */ -#define ITM_TCR_BUSY_Pos 23U /*!< ITM TCR: BUSY Position */ -#define ITM_TCR_BUSY_Msk (1UL << ITM_TCR_BUSY_Pos) /*!< ITM TCR: BUSY Mask */ - -#define ITM_TCR_TraceBusID_Pos 16U /*!< ITM TCR: ATBID Position */ -#define ITM_TCR_TraceBusID_Msk (0x7FUL << ITM_TCR_TraceBusID_Pos) /*!< ITM TCR: ATBID Mask */ - -#define ITM_TCR_GTSFREQ_Pos 10U /*!< ITM TCR: Global timestamp frequency Position */ -#define ITM_TCR_GTSFREQ_Msk (3UL << ITM_TCR_GTSFREQ_Pos) /*!< ITM TCR: Global timestamp frequency Mask */ - -#define ITM_TCR_TSPrescale_Pos 8U /*!< ITM TCR: TSPrescale Position */ -#define ITM_TCR_TSPrescale_Msk (3UL << ITM_TCR_TSPrescale_Pos) /*!< ITM TCR: TSPrescale Mask */ - -#define ITM_TCR_SWOENA_Pos 4U /*!< ITM TCR: SWOENA Position */ -#define ITM_TCR_SWOENA_Msk (1UL << ITM_TCR_SWOENA_Pos) /*!< ITM TCR: SWOENA Mask */ - -#define ITM_TCR_DWTENA_Pos 3U /*!< ITM TCR: DWTENA Position */ -#define ITM_TCR_DWTENA_Msk (1UL << ITM_TCR_DWTENA_Pos) /*!< ITM TCR: DWTENA Mask */ - -#define ITM_TCR_SYNCENA_Pos 2U /*!< ITM TCR: SYNCENA Position */ -#define ITM_TCR_SYNCENA_Msk (1UL << ITM_TCR_SYNCENA_Pos) /*!< ITM TCR: SYNCENA Mask */ - -#define ITM_TCR_TSENA_Pos 1U /*!< ITM TCR: TSENA Position */ -#define ITM_TCR_TSENA_Msk (1UL << ITM_TCR_TSENA_Pos) /*!< ITM TCR: TSENA Mask */ - -#define ITM_TCR_ITMENA_Pos 0U /*!< ITM TCR: ITM Enable bit Position */ -#define ITM_TCR_ITMENA_Msk (1UL /*<< ITM_TCR_ITMENA_Pos*/) /*!< ITM TCR: ITM Enable bit Mask */ - -/* ITM Integration Write Register Definitions */ -#define ITM_IWR_ATVALIDM_Pos 0U /*!< ITM IWR: ATVALIDM Position */ -#define ITM_IWR_ATVALIDM_Msk (1UL /*<< ITM_IWR_ATVALIDM_Pos*/) /*!< ITM IWR: ATVALIDM Mask */ - -/* ITM Integration Read Register Definitions */ -#define ITM_IRR_ATREADYM_Pos 0U /*!< ITM IRR: ATREADYM Position */ -#define ITM_IRR_ATREADYM_Msk (1UL /*<< ITM_IRR_ATREADYM_Pos*/) /*!< ITM IRR: ATREADYM Mask */ - -/* ITM Integration Mode Control Register Definitions */ -#define ITM_IMCR_INTEGRATION_Pos 0U /*!< ITM IMCR: INTEGRATION Position */ -#define ITM_IMCR_INTEGRATION_Msk (1UL /*<< ITM_IMCR_INTEGRATION_Pos*/) /*!< ITM IMCR: INTEGRATION Mask */ - -/* ITM Lock Status Register Definitions */ -#define ITM_LSR_ByteAcc_Pos 2U /*!< ITM LSR: ByteAcc Position */ -#define ITM_LSR_ByteAcc_Msk (1UL << ITM_LSR_ByteAcc_Pos) /*!< ITM LSR: ByteAcc Mask */ - -#define ITM_LSR_Access_Pos 1U /*!< ITM LSR: Access Position */ -#define ITM_LSR_Access_Msk (1UL << ITM_LSR_Access_Pos) /*!< ITM LSR: Access Mask */ - -#define ITM_LSR_Present_Pos 0U /*!< ITM LSR: Present Position */ -#define ITM_LSR_Present_Msk (1UL /*<< ITM_LSR_Present_Pos*/) /*!< ITM LSR: Present Mask */ - -/*@}*/ /* end of group CMSIS_ITM */ - - -/** - \ingroup CMSIS_core_register - \defgroup CMSIS_DWT Data Watchpoint and Trace (DWT) - \brief Type definitions for the Data Watchpoint and Trace (DWT) - @{ - */ - -/** - \brief Structure type to access the Data Watchpoint and Trace Register (DWT). - */ -typedef struct -{ - __IOM uint32_t CTRL; /*!< Offset: 0x000 (R/W) Control Register */ - __IOM uint32_t CYCCNT; /*!< Offset: 0x004 (R/W) Cycle Count Register */ - __IOM uint32_t CPICNT; /*!< Offset: 0x008 (R/W) CPI Count Register */ - __IOM uint32_t EXCCNT; /*!< Offset: 0x00C (R/W) Exception Overhead Count Register */ - __IOM uint32_t SLEEPCNT; /*!< Offset: 0x010 (R/W) Sleep Count Register */ - __IOM uint32_t LSUCNT; /*!< Offset: 0x014 (R/W) LSU Count Register */ - __IOM uint32_t FOLDCNT; /*!< Offset: 0x018 (R/W) Folded-instruction Count Register */ - __IM uint32_t PCSR; /*!< Offset: 0x01C (R/ ) Program Counter Sample Register */ - __IOM uint32_t COMP0; /*!< Offset: 0x020 (R/W) Comparator Register 0 */ - __IOM uint32_t MASK0; /*!< Offset: 0x024 (R/W) Mask Register 0 */ - __IOM uint32_t FUNCTION0; /*!< Offset: 0x028 (R/W) Function Register 0 */ - uint32_t RESERVED0[1U]; - __IOM uint32_t COMP1; /*!< Offset: 0x030 (R/W) Comparator Register 1 */ - __IOM uint32_t MASK1; /*!< Offset: 0x034 (R/W) Mask Register 1 */ - __IOM uint32_t FUNCTION1; /*!< Offset: 0x038 (R/W) Function Register 1 */ - uint32_t RESERVED1[1U]; - __IOM uint32_t COMP2; /*!< Offset: 0x040 (R/W) Comparator Register 2 */ - __IOM uint32_t MASK2; /*!< Offset: 0x044 (R/W) Mask Register 2 */ - __IOM uint32_t FUNCTION2; /*!< Offset: 0x048 (R/W) Function Register 2 */ - uint32_t RESERVED2[1U]; - __IOM uint32_t COMP3; /*!< Offset: 0x050 (R/W) Comparator Register 3 */ - __IOM uint32_t MASK3; /*!< Offset: 0x054 (R/W) Mask Register 3 */ - __IOM uint32_t FUNCTION3; /*!< Offset: 0x058 (R/W) Function Register 3 */ -} DWT_Type; - -/* DWT Control Register Definitions */ -#define DWT_CTRL_NUMCOMP_Pos 28U /*!< DWT CTRL: NUMCOMP Position */ -#define DWT_CTRL_NUMCOMP_Msk (0xFUL << DWT_CTRL_NUMCOMP_Pos) /*!< DWT CTRL: NUMCOMP Mask */ - -#define DWT_CTRL_NOTRCPKT_Pos 27U /*!< DWT CTRL: NOTRCPKT Position */ -#define DWT_CTRL_NOTRCPKT_Msk (0x1UL << DWT_CTRL_NOTRCPKT_Pos) /*!< DWT CTRL: NOTRCPKT Mask */ - -#define DWT_CTRL_NOEXTTRIG_Pos 26U /*!< DWT CTRL: NOEXTTRIG Position */ -#define DWT_CTRL_NOEXTTRIG_Msk (0x1UL << DWT_CTRL_NOEXTTRIG_Pos) /*!< DWT CTRL: NOEXTTRIG Mask */ - -#define DWT_CTRL_NOCYCCNT_Pos 25U /*!< DWT CTRL: NOCYCCNT Position */ -#define DWT_CTRL_NOCYCCNT_Msk (0x1UL << DWT_CTRL_NOCYCCNT_Pos) /*!< DWT CTRL: NOCYCCNT Mask */ - -#define DWT_CTRL_NOPRFCNT_Pos 24U /*!< DWT CTRL: NOPRFCNT Position */ -#define DWT_CTRL_NOPRFCNT_Msk (0x1UL << DWT_CTRL_NOPRFCNT_Pos) /*!< DWT CTRL: NOPRFCNT Mask */ - -#define DWT_CTRL_CYCEVTENA_Pos 22U /*!< DWT CTRL: CYCEVTENA Position */ -#define DWT_CTRL_CYCEVTENA_Msk (0x1UL << DWT_CTRL_CYCEVTENA_Pos) /*!< DWT CTRL: CYCEVTENA Mask */ - -#define DWT_CTRL_FOLDEVTENA_Pos 21U /*!< DWT CTRL: FOLDEVTENA Position */ -#define DWT_CTRL_FOLDEVTENA_Msk (0x1UL << DWT_CTRL_FOLDEVTENA_Pos) /*!< DWT CTRL: FOLDEVTENA Mask */ - -#define DWT_CTRL_LSUEVTENA_Pos 20U /*!< DWT CTRL: LSUEVTENA Position */ -#define DWT_CTRL_LSUEVTENA_Msk (0x1UL << DWT_CTRL_LSUEVTENA_Pos) /*!< DWT CTRL: LSUEVTENA Mask */ - -#define DWT_CTRL_SLEEPEVTENA_Pos 19U /*!< DWT CTRL: SLEEPEVTENA Position */ -#define DWT_CTRL_SLEEPEVTENA_Msk (0x1UL << DWT_CTRL_SLEEPEVTENA_Pos) /*!< DWT CTRL: SLEEPEVTENA Mask */ - -#define DWT_CTRL_EXCEVTENA_Pos 18U /*!< DWT CTRL: EXCEVTENA Position */ -#define DWT_CTRL_EXCEVTENA_Msk (0x1UL << DWT_CTRL_EXCEVTENA_Pos) /*!< DWT CTRL: EXCEVTENA Mask */ - -#define DWT_CTRL_CPIEVTENA_Pos 17U /*!< DWT CTRL: CPIEVTENA Position */ -#define DWT_CTRL_CPIEVTENA_Msk (0x1UL << DWT_CTRL_CPIEVTENA_Pos) /*!< DWT CTRL: CPIEVTENA Mask */ - -#define DWT_CTRL_EXCTRCENA_Pos 16U /*!< DWT CTRL: EXCTRCENA Position */ -#define DWT_CTRL_EXCTRCENA_Msk (0x1UL << DWT_CTRL_EXCTRCENA_Pos) /*!< DWT CTRL: EXCTRCENA Mask */ - -#define DWT_CTRL_PCSAMPLENA_Pos 12U /*!< DWT CTRL: PCSAMPLENA Position */ -#define DWT_CTRL_PCSAMPLENA_Msk (0x1UL << DWT_CTRL_PCSAMPLENA_Pos) /*!< DWT CTRL: PCSAMPLENA Mask */ - -#define DWT_CTRL_SYNCTAP_Pos 10U /*!< DWT CTRL: SYNCTAP Position */ -#define DWT_CTRL_SYNCTAP_Msk (0x3UL << DWT_CTRL_SYNCTAP_Pos) /*!< DWT CTRL: SYNCTAP Mask */ - -#define DWT_CTRL_CYCTAP_Pos 9U /*!< DWT CTRL: CYCTAP Position */ -#define DWT_CTRL_CYCTAP_Msk (0x1UL << DWT_CTRL_CYCTAP_Pos) /*!< DWT CTRL: CYCTAP Mask */ - -#define DWT_CTRL_POSTINIT_Pos 5U /*!< DWT CTRL: POSTINIT Position */ -#define DWT_CTRL_POSTINIT_Msk (0xFUL << DWT_CTRL_POSTINIT_Pos) /*!< DWT CTRL: POSTINIT Mask */ - -#define DWT_CTRL_POSTPRESET_Pos 1U /*!< DWT CTRL: POSTPRESET Position */ -#define DWT_CTRL_POSTPRESET_Msk (0xFUL << DWT_CTRL_POSTPRESET_Pos) /*!< DWT CTRL: POSTPRESET Mask */ - -#define DWT_CTRL_CYCCNTENA_Pos 0U /*!< DWT CTRL: CYCCNTENA Position */ -#define DWT_CTRL_CYCCNTENA_Msk (0x1UL /*<< DWT_CTRL_CYCCNTENA_Pos*/) /*!< DWT CTRL: CYCCNTENA Mask */ - -/* DWT CPI Count Register Definitions */ -#define DWT_CPICNT_CPICNT_Pos 0U /*!< DWT CPICNT: CPICNT Position */ -#define DWT_CPICNT_CPICNT_Msk (0xFFUL /*<< DWT_CPICNT_CPICNT_Pos*/) /*!< DWT CPICNT: CPICNT Mask */ - -/* DWT Exception Overhead Count Register Definitions */ -#define DWT_EXCCNT_EXCCNT_Pos 0U /*!< DWT EXCCNT: EXCCNT Position */ -#define DWT_EXCCNT_EXCCNT_Msk (0xFFUL /*<< DWT_EXCCNT_EXCCNT_Pos*/) /*!< DWT EXCCNT: EXCCNT Mask */ - -/* DWT Sleep Count Register Definitions */ -#define DWT_SLEEPCNT_SLEEPCNT_Pos 0U /*!< DWT SLEEPCNT: SLEEPCNT Position */ -#define DWT_SLEEPCNT_SLEEPCNT_Msk (0xFFUL /*<< DWT_SLEEPCNT_SLEEPCNT_Pos*/) /*!< DWT SLEEPCNT: SLEEPCNT Mask */ - -/* DWT LSU Count Register Definitions */ -#define DWT_LSUCNT_LSUCNT_Pos 0U /*!< DWT LSUCNT: LSUCNT Position */ -#define DWT_LSUCNT_LSUCNT_Msk (0xFFUL /*<< DWT_LSUCNT_LSUCNT_Pos*/) /*!< DWT LSUCNT: LSUCNT Mask */ - -/* DWT Folded-instruction Count Register Definitions */ -#define DWT_FOLDCNT_FOLDCNT_Pos 0U /*!< DWT FOLDCNT: FOLDCNT Position */ -#define DWT_FOLDCNT_FOLDCNT_Msk (0xFFUL /*<< DWT_FOLDCNT_FOLDCNT_Pos*/) /*!< DWT FOLDCNT: FOLDCNT Mask */ - -/* DWT Comparator Mask Register Definitions */ -#define DWT_MASK_MASK_Pos 0U /*!< DWT MASK: MASK Position */ -#define DWT_MASK_MASK_Msk (0x1FUL /*<< DWT_MASK_MASK_Pos*/) /*!< DWT MASK: MASK Mask */ - -/* DWT Comparator Function Register Definitions */ -#define DWT_FUNCTION_MATCHED_Pos 24U /*!< DWT FUNCTION: MATCHED Position */ -#define DWT_FUNCTION_MATCHED_Msk (0x1UL << DWT_FUNCTION_MATCHED_Pos) /*!< DWT FUNCTION: MATCHED Mask */ - -#define DWT_FUNCTION_DATAVADDR1_Pos 16U /*!< DWT FUNCTION: DATAVADDR1 Position */ -#define DWT_FUNCTION_DATAVADDR1_Msk (0xFUL << DWT_FUNCTION_DATAVADDR1_Pos) /*!< DWT FUNCTION: DATAVADDR1 Mask */ - -#define DWT_FUNCTION_DATAVADDR0_Pos 12U /*!< DWT FUNCTION: DATAVADDR0 Position */ -#define DWT_FUNCTION_DATAVADDR0_Msk (0xFUL << DWT_FUNCTION_DATAVADDR0_Pos) /*!< DWT FUNCTION: DATAVADDR0 Mask */ - -#define DWT_FUNCTION_DATAVSIZE_Pos 10U /*!< DWT FUNCTION: DATAVSIZE Position */ -#define DWT_FUNCTION_DATAVSIZE_Msk (0x3UL << DWT_FUNCTION_DATAVSIZE_Pos) /*!< DWT FUNCTION: DATAVSIZE Mask */ - -#define DWT_FUNCTION_LNK1ENA_Pos 9U /*!< DWT FUNCTION: LNK1ENA Position */ -#define DWT_FUNCTION_LNK1ENA_Msk (0x1UL << DWT_FUNCTION_LNK1ENA_Pos) /*!< DWT FUNCTION: LNK1ENA Mask */ - -#define DWT_FUNCTION_DATAVMATCH_Pos 8U /*!< DWT FUNCTION: DATAVMATCH Position */ -#define DWT_FUNCTION_DATAVMATCH_Msk (0x1UL << DWT_FUNCTION_DATAVMATCH_Pos) /*!< DWT FUNCTION: DATAVMATCH Mask */ - -#define DWT_FUNCTION_CYCMATCH_Pos 7U /*!< DWT FUNCTION: CYCMATCH Position */ -#define DWT_FUNCTION_CYCMATCH_Msk (0x1UL << DWT_FUNCTION_CYCMATCH_Pos) /*!< DWT FUNCTION: CYCMATCH Mask */ - -#define DWT_FUNCTION_EMITRANGE_Pos 5U /*!< DWT FUNCTION: EMITRANGE Position */ -#define DWT_FUNCTION_EMITRANGE_Msk (0x1UL << DWT_FUNCTION_EMITRANGE_Pos) /*!< DWT FUNCTION: EMITRANGE Mask */ - -#define DWT_FUNCTION_FUNCTION_Pos 0U /*!< DWT FUNCTION: FUNCTION Position */ -#define DWT_FUNCTION_FUNCTION_Msk (0xFUL /*<< DWT_FUNCTION_FUNCTION_Pos*/) /*!< DWT FUNCTION: FUNCTION Mask */ - -/*@}*/ /* end of group CMSIS_DWT */ - - -/** - \ingroup CMSIS_core_register - \defgroup CMSIS_TPI Trace Port Interface (TPI) - \brief Type definitions for the Trace Port Interface (TPI) - @{ - */ - -/** - \brief Structure type to access the Trace Port Interface Register (TPI). - */ -typedef struct -{ - __IM uint32_t SSPSR; /*!< Offset: 0x000 (R/ ) Supported Parallel Port Size Register */ - __IOM uint32_t CSPSR; /*!< Offset: 0x004 (R/W) Current Parallel Port Size Register */ - uint32_t RESERVED0[2U]; - __IOM uint32_t ACPR; /*!< Offset: 0x010 (R/W) Asynchronous Clock Prescaler Register */ - uint32_t RESERVED1[55U]; - __IOM uint32_t SPPR; /*!< Offset: 0x0F0 (R/W) Selected Pin Protocol Register */ - uint32_t RESERVED2[131U]; - __IM uint32_t FFSR; /*!< Offset: 0x300 (R/ ) Formatter and Flush Status Register */ - __IOM uint32_t FFCR; /*!< Offset: 0x304 (R/W) Formatter and Flush Control Register */ - __IM uint32_t FSCR; /*!< Offset: 0x308 (R/ ) Formatter Synchronization Counter Register */ - uint32_t RESERVED3[759U]; - __IM uint32_t TRIGGER; /*!< Offset: 0xEE8 (R/ ) TRIGGER Register */ - __IM uint32_t FIFO0; /*!< Offset: 0xEEC (R/ ) Integration ETM Data */ - __IM uint32_t ITATBCTR2; /*!< Offset: 0xEF0 (R/ ) ITATBCTR2 */ - uint32_t RESERVED4[1U]; - __IM uint32_t ITATBCTR0; /*!< Offset: 0xEF8 (R/ ) ITATBCTR0 */ - __IM uint32_t FIFO1; /*!< Offset: 0xEFC (R/ ) Integration ITM Data */ - __IOM uint32_t ITCTRL; /*!< Offset: 0xF00 (R/W) Integration Mode Control */ - uint32_t RESERVED5[39U]; - __IOM uint32_t CLAIMSET; /*!< Offset: 0xFA0 (R/W) Claim tag set */ - __IOM uint32_t CLAIMCLR; /*!< Offset: 0xFA4 (R/W) Claim tag clear */ - uint32_t RESERVED7[8U]; - __IM uint32_t DEVID; /*!< Offset: 0xFC8 (R/ ) TPIU_DEVID */ - __IM uint32_t DEVTYPE; /*!< Offset: 0xFCC (R/ ) TPIU_DEVTYPE */ -} TPI_Type; - -/* TPI Asynchronous Clock Prescaler Register Definitions */ -#define TPI_ACPR_PRESCALER_Pos 0U /*!< TPI ACPR: PRESCALER Position */ -#define TPI_ACPR_PRESCALER_Msk (0x1FFFUL /*<< TPI_ACPR_PRESCALER_Pos*/) /*!< TPI ACPR: PRESCALER Mask */ - -/* TPI Selected Pin Protocol Register Definitions */ -#define TPI_SPPR_TXMODE_Pos 0U /*!< TPI SPPR: TXMODE Position */ -#define TPI_SPPR_TXMODE_Msk (0x3UL /*<< TPI_SPPR_TXMODE_Pos*/) /*!< TPI SPPR: TXMODE Mask */ - -/* TPI Formatter and Flush Status Register Definitions */ -#define TPI_FFSR_FtNonStop_Pos 3U /*!< TPI FFSR: FtNonStop Position */ -#define TPI_FFSR_FtNonStop_Msk (0x1UL << TPI_FFSR_FtNonStop_Pos) /*!< TPI FFSR: FtNonStop Mask */ - -#define TPI_FFSR_TCPresent_Pos 2U /*!< TPI FFSR: TCPresent Position */ -#define TPI_FFSR_TCPresent_Msk (0x1UL << TPI_FFSR_TCPresent_Pos) /*!< TPI FFSR: TCPresent Mask */ - -#define TPI_FFSR_FtStopped_Pos 1U /*!< TPI FFSR: FtStopped Position */ -#define TPI_FFSR_FtStopped_Msk (0x1UL << TPI_FFSR_FtStopped_Pos) /*!< TPI FFSR: FtStopped Mask */ - -#define TPI_FFSR_FlInProg_Pos 0U /*!< TPI FFSR: FlInProg Position */ -#define TPI_FFSR_FlInProg_Msk (0x1UL /*<< TPI_FFSR_FlInProg_Pos*/) /*!< TPI FFSR: FlInProg Mask */ - -/* TPI Formatter and Flush Control Register Definitions */ -#define TPI_FFCR_TrigIn_Pos 8U /*!< TPI FFCR: TrigIn Position */ -#define TPI_FFCR_TrigIn_Msk (0x1UL << TPI_FFCR_TrigIn_Pos) /*!< TPI FFCR: TrigIn Mask */ - -#define TPI_FFCR_EnFCont_Pos 1U /*!< TPI FFCR: EnFCont Position */ -#define TPI_FFCR_EnFCont_Msk (0x1UL << TPI_FFCR_EnFCont_Pos) /*!< TPI FFCR: EnFCont Mask */ - -/* TPI TRIGGER Register Definitions */ -#define TPI_TRIGGER_TRIGGER_Pos 0U /*!< TPI TRIGGER: TRIGGER Position */ -#define TPI_TRIGGER_TRIGGER_Msk (0x1UL /*<< TPI_TRIGGER_TRIGGER_Pos*/) /*!< TPI TRIGGER: TRIGGER Mask */ - -/* TPI Integration ETM Data Register Definitions (FIFO0) */ -#define TPI_FIFO0_ITM_ATVALID_Pos 29U /*!< TPI FIFO0: ITM_ATVALID Position */ -#define TPI_FIFO0_ITM_ATVALID_Msk (0x3UL << TPI_FIFO0_ITM_ATVALID_Pos) /*!< TPI FIFO0: ITM_ATVALID Mask */ - -#define TPI_FIFO0_ITM_bytecount_Pos 27U /*!< TPI FIFO0: ITM_bytecount Position */ -#define TPI_FIFO0_ITM_bytecount_Msk (0x3UL << TPI_FIFO0_ITM_bytecount_Pos) /*!< TPI FIFO0: ITM_bytecount Mask */ - -#define TPI_FIFO0_ETM_ATVALID_Pos 26U /*!< TPI FIFO0: ETM_ATVALID Position */ -#define TPI_FIFO0_ETM_ATVALID_Msk (0x3UL << TPI_FIFO0_ETM_ATVALID_Pos) /*!< TPI FIFO0: ETM_ATVALID Mask */ - -#define TPI_FIFO0_ETM_bytecount_Pos 24U /*!< TPI FIFO0: ETM_bytecount Position */ -#define TPI_FIFO0_ETM_bytecount_Msk (0x3UL << TPI_FIFO0_ETM_bytecount_Pos) /*!< TPI FIFO0: ETM_bytecount Mask */ - -#define TPI_FIFO0_ETM2_Pos 16U /*!< TPI FIFO0: ETM2 Position */ -#define TPI_FIFO0_ETM2_Msk (0xFFUL << TPI_FIFO0_ETM2_Pos) /*!< TPI FIFO0: ETM2 Mask */ - -#define TPI_FIFO0_ETM1_Pos 8U /*!< TPI FIFO0: ETM1 Position */ -#define TPI_FIFO0_ETM1_Msk (0xFFUL << TPI_FIFO0_ETM1_Pos) /*!< TPI FIFO0: ETM1 Mask */ - -#define TPI_FIFO0_ETM0_Pos 0U /*!< TPI FIFO0: ETM0 Position */ -#define TPI_FIFO0_ETM0_Msk (0xFFUL /*<< TPI_FIFO0_ETM0_Pos*/) /*!< TPI FIFO0: ETM0 Mask */ - -/* TPI ITATBCTR2 Register Definitions */ -#define TPI_ITATBCTR2_ATREADY2_Pos 0U /*!< TPI ITATBCTR2: ATREADY2 Position */ -#define TPI_ITATBCTR2_ATREADY2_Msk (0x1UL /*<< TPI_ITATBCTR2_ATREADY2_Pos*/) /*!< TPI ITATBCTR2: ATREADY2 Mask */ - -#define TPI_ITATBCTR2_ATREADY1_Pos 0U /*!< TPI ITATBCTR2: ATREADY1 Position */ -#define TPI_ITATBCTR2_ATREADY1_Msk (0x1UL /*<< TPI_ITATBCTR2_ATREADY1_Pos*/) /*!< TPI ITATBCTR2: ATREADY1 Mask */ - -/* TPI Integration ITM Data Register Definitions (FIFO1) */ -#define TPI_FIFO1_ITM_ATVALID_Pos 29U /*!< TPI FIFO1: ITM_ATVALID Position */ -#define TPI_FIFO1_ITM_ATVALID_Msk (0x3UL << TPI_FIFO1_ITM_ATVALID_Pos) /*!< TPI FIFO1: ITM_ATVALID Mask */ - -#define TPI_FIFO1_ITM_bytecount_Pos 27U /*!< TPI FIFO1: ITM_bytecount Position */ -#define TPI_FIFO1_ITM_bytecount_Msk (0x3UL << TPI_FIFO1_ITM_bytecount_Pos) /*!< TPI FIFO1: ITM_bytecount Mask */ - -#define TPI_FIFO1_ETM_ATVALID_Pos 26U /*!< TPI FIFO1: ETM_ATVALID Position */ -#define TPI_FIFO1_ETM_ATVALID_Msk (0x3UL << TPI_FIFO1_ETM_ATVALID_Pos) /*!< TPI FIFO1: ETM_ATVALID Mask */ - -#define TPI_FIFO1_ETM_bytecount_Pos 24U /*!< TPI FIFO1: ETM_bytecount Position */ -#define TPI_FIFO1_ETM_bytecount_Msk (0x3UL << TPI_FIFO1_ETM_bytecount_Pos) /*!< TPI FIFO1: ETM_bytecount Mask */ - -#define TPI_FIFO1_ITM2_Pos 16U /*!< TPI FIFO1: ITM2 Position */ -#define TPI_FIFO1_ITM2_Msk (0xFFUL << TPI_FIFO1_ITM2_Pos) /*!< TPI FIFO1: ITM2 Mask */ - -#define TPI_FIFO1_ITM1_Pos 8U /*!< TPI FIFO1: ITM1 Position */ -#define TPI_FIFO1_ITM1_Msk (0xFFUL << TPI_FIFO1_ITM1_Pos) /*!< TPI FIFO1: ITM1 Mask */ - -#define TPI_FIFO1_ITM0_Pos 0U /*!< TPI FIFO1: ITM0 Position */ -#define TPI_FIFO1_ITM0_Msk (0xFFUL /*<< TPI_FIFO1_ITM0_Pos*/) /*!< TPI FIFO1: ITM0 Mask */ - -/* TPI ITATBCTR0 Register Definitions */ -#define TPI_ITATBCTR0_ATREADY2_Pos 0U /*!< TPI ITATBCTR0: ATREADY2 Position */ -#define TPI_ITATBCTR0_ATREADY2_Msk (0x1UL /*<< TPI_ITATBCTR0_ATREADY2_Pos*/) /*!< TPI ITATBCTR0: ATREADY2 Mask */ - -#define TPI_ITATBCTR0_ATREADY1_Pos 0U /*!< TPI ITATBCTR0: ATREADY1 Position */ -#define TPI_ITATBCTR0_ATREADY1_Msk (0x1UL /*<< TPI_ITATBCTR0_ATREADY1_Pos*/) /*!< TPI ITATBCTR0: ATREADY1 Mask */ - -/* TPI Integration Mode Control Register Definitions */ -#define TPI_ITCTRL_Mode_Pos 0U /*!< TPI ITCTRL: Mode Position */ -#define TPI_ITCTRL_Mode_Msk (0x3UL /*<< TPI_ITCTRL_Mode_Pos*/) /*!< TPI ITCTRL: Mode Mask */ - -/* TPI DEVID Register Definitions */ -#define TPI_DEVID_NRZVALID_Pos 11U /*!< TPI DEVID: NRZVALID Position */ -#define TPI_DEVID_NRZVALID_Msk (0x1UL << TPI_DEVID_NRZVALID_Pos) /*!< TPI DEVID: NRZVALID Mask */ - -#define TPI_DEVID_MANCVALID_Pos 10U /*!< TPI DEVID: MANCVALID Position */ -#define TPI_DEVID_MANCVALID_Msk (0x1UL << TPI_DEVID_MANCVALID_Pos) /*!< TPI DEVID: MANCVALID Mask */ - -#define TPI_DEVID_PTINVALID_Pos 9U /*!< TPI DEVID: PTINVALID Position */ -#define TPI_DEVID_PTINVALID_Msk (0x1UL << TPI_DEVID_PTINVALID_Pos) /*!< TPI DEVID: PTINVALID Mask */ - -#define TPI_DEVID_MinBufSz_Pos 6U /*!< TPI DEVID: MinBufSz Position */ -#define TPI_DEVID_MinBufSz_Msk (0x7UL << TPI_DEVID_MinBufSz_Pos) /*!< TPI DEVID: MinBufSz Mask */ - -#define TPI_DEVID_AsynClkIn_Pos 5U /*!< TPI DEVID: AsynClkIn Position */ -#define TPI_DEVID_AsynClkIn_Msk (0x1UL << TPI_DEVID_AsynClkIn_Pos) /*!< TPI DEVID: AsynClkIn Mask */ - -#define TPI_DEVID_NrTraceInput_Pos 0U /*!< TPI DEVID: NrTraceInput Position */ -#define TPI_DEVID_NrTraceInput_Msk (0x1FUL /*<< TPI_DEVID_NrTraceInput_Pos*/) /*!< TPI DEVID: NrTraceInput Mask */ - -/* TPI DEVTYPE Register Definitions */ -#define TPI_DEVTYPE_SubType_Pos 4U /*!< TPI DEVTYPE: SubType Position */ -#define TPI_DEVTYPE_SubType_Msk (0xFUL /*<< TPI_DEVTYPE_SubType_Pos*/) /*!< TPI DEVTYPE: SubType Mask */ - -#define TPI_DEVTYPE_MajorType_Pos 0U /*!< TPI DEVTYPE: MajorType Position */ -#define TPI_DEVTYPE_MajorType_Msk (0xFUL << TPI_DEVTYPE_MajorType_Pos) /*!< TPI DEVTYPE: MajorType Mask */ - -/*@}*/ /* end of group CMSIS_TPI */ - - -#if defined (__MPU_PRESENT) && (__MPU_PRESENT == 1U) -/** - \ingroup CMSIS_core_register - \defgroup CMSIS_MPU Memory Protection Unit (MPU) - \brief Type definitions for the Memory Protection Unit (MPU) - @{ - */ - -/** - \brief Structure type to access the Memory Protection Unit (MPU). - */ -typedef struct -{ - __IM uint32_t TYPE; /*!< Offset: 0x000 (R/ ) MPU Type Register */ - __IOM uint32_t CTRL; /*!< Offset: 0x004 (R/W) MPU Control Register */ - __IOM uint32_t RNR; /*!< Offset: 0x008 (R/W) MPU Region RNRber Register */ - __IOM uint32_t RBAR; /*!< Offset: 0x00C (R/W) MPU Region Base Address Register */ - __IOM uint32_t RASR; /*!< Offset: 0x010 (R/W) MPU Region Attribute and Size Register */ - __IOM uint32_t RBAR_A1; /*!< Offset: 0x014 (R/W) MPU Alias 1 Region Base Address Register */ - __IOM uint32_t RASR_A1; /*!< Offset: 0x018 (R/W) MPU Alias 1 Region Attribute and Size Register */ - __IOM uint32_t RBAR_A2; /*!< Offset: 0x01C (R/W) MPU Alias 2 Region Base Address Register */ - __IOM uint32_t RASR_A2; /*!< Offset: 0x020 (R/W) MPU Alias 2 Region Attribute and Size Register */ - __IOM uint32_t RBAR_A3; /*!< Offset: 0x024 (R/W) MPU Alias 3 Region Base Address Register */ - __IOM uint32_t RASR_A3; /*!< Offset: 0x028 (R/W) MPU Alias 3 Region Attribute and Size Register */ -} MPU_Type; - -#define MPU_TYPE_RALIASES 4U - -/* MPU Type Register Definitions */ -#define MPU_TYPE_IREGION_Pos 16U /*!< MPU TYPE: IREGION Position */ -#define MPU_TYPE_IREGION_Msk (0xFFUL << MPU_TYPE_IREGION_Pos) /*!< MPU TYPE: IREGION Mask */ - -#define MPU_TYPE_DREGION_Pos 8U /*!< MPU TYPE: DREGION Position */ -#define MPU_TYPE_DREGION_Msk (0xFFUL << MPU_TYPE_DREGION_Pos) /*!< MPU TYPE: DREGION Mask */ - -#define MPU_TYPE_SEPARATE_Pos 0U /*!< MPU TYPE: SEPARATE Position */ -#define MPU_TYPE_SEPARATE_Msk (1UL /*<< MPU_TYPE_SEPARATE_Pos*/) /*!< MPU TYPE: SEPARATE Mask */ - -/* MPU Control Register Definitions */ -#define MPU_CTRL_PRIVDEFENA_Pos 2U /*!< MPU CTRL: PRIVDEFENA Position */ -#define MPU_CTRL_PRIVDEFENA_Msk (1UL << MPU_CTRL_PRIVDEFENA_Pos) /*!< MPU CTRL: PRIVDEFENA Mask */ - -#define MPU_CTRL_HFNMIENA_Pos 1U /*!< MPU CTRL: HFNMIENA Position */ -#define MPU_CTRL_HFNMIENA_Msk (1UL << MPU_CTRL_HFNMIENA_Pos) /*!< MPU CTRL: HFNMIENA Mask */ - -#define MPU_CTRL_ENABLE_Pos 0U /*!< MPU CTRL: ENABLE Position */ -#define MPU_CTRL_ENABLE_Msk (1UL /*<< MPU_CTRL_ENABLE_Pos*/) /*!< MPU CTRL: ENABLE Mask */ - -/* MPU Region Number Register Definitions */ -#define MPU_RNR_REGION_Pos 0U /*!< MPU RNR: REGION Position */ -#define MPU_RNR_REGION_Msk (0xFFUL /*<< MPU_RNR_REGION_Pos*/) /*!< MPU RNR: REGION Mask */ - -/* MPU Region Base Address Register Definitions */ -#define MPU_RBAR_ADDR_Pos 5U /*!< MPU RBAR: ADDR Position */ -#define MPU_RBAR_ADDR_Msk (0x7FFFFFFUL << MPU_RBAR_ADDR_Pos) /*!< MPU RBAR: ADDR Mask */ - -#define MPU_RBAR_VALID_Pos 4U /*!< MPU RBAR: VALID Position */ -#define MPU_RBAR_VALID_Msk (1UL << MPU_RBAR_VALID_Pos) /*!< MPU RBAR: VALID Mask */ - -#define MPU_RBAR_REGION_Pos 0U /*!< MPU RBAR: REGION Position */ -#define MPU_RBAR_REGION_Msk (0xFUL /*<< MPU_RBAR_REGION_Pos*/) /*!< MPU RBAR: REGION Mask */ - -/* MPU Region Attribute and Size Register Definitions */ -#define MPU_RASR_ATTRS_Pos 16U /*!< MPU RASR: MPU Region Attribute field Position */ -#define MPU_RASR_ATTRS_Msk (0xFFFFUL << MPU_RASR_ATTRS_Pos) /*!< MPU RASR: MPU Region Attribute field Mask */ - -#define MPU_RASR_XN_Pos 28U /*!< MPU RASR: ATTRS.XN Position */ -#define MPU_RASR_XN_Msk (1UL << MPU_RASR_XN_Pos) /*!< MPU RASR: ATTRS.XN Mask */ - -#define MPU_RASR_AP_Pos 24U /*!< MPU RASR: ATTRS.AP Position */ -#define MPU_RASR_AP_Msk (0x7UL << MPU_RASR_AP_Pos) /*!< MPU RASR: ATTRS.AP Mask */ - -#define MPU_RASR_TEX_Pos 19U /*!< MPU RASR: ATTRS.TEX Position */ -#define MPU_RASR_TEX_Msk (0x7UL << MPU_RASR_TEX_Pos) /*!< MPU RASR: ATTRS.TEX Mask */ - -#define MPU_RASR_S_Pos 18U /*!< MPU RASR: ATTRS.S Position */ -#define MPU_RASR_S_Msk (1UL << MPU_RASR_S_Pos) /*!< MPU RASR: ATTRS.S Mask */ - -#define MPU_RASR_C_Pos 17U /*!< MPU RASR: ATTRS.C Position */ -#define MPU_RASR_C_Msk (1UL << MPU_RASR_C_Pos) /*!< MPU RASR: ATTRS.C Mask */ - -#define MPU_RASR_B_Pos 16U /*!< MPU RASR: ATTRS.B Position */ -#define MPU_RASR_B_Msk (1UL << MPU_RASR_B_Pos) /*!< MPU RASR: ATTRS.B Mask */ - -#define MPU_RASR_SRD_Pos 8U /*!< MPU RASR: Sub-Region Disable Position */ -#define MPU_RASR_SRD_Msk (0xFFUL << MPU_RASR_SRD_Pos) /*!< MPU RASR: Sub-Region Disable Mask */ - -#define MPU_RASR_SIZE_Pos 1U /*!< MPU RASR: Region Size Field Position */ -#define MPU_RASR_SIZE_Msk (0x1FUL << MPU_RASR_SIZE_Pos) /*!< MPU RASR: Region Size Field Mask */ - -#define MPU_RASR_ENABLE_Pos 0U /*!< MPU RASR: Region enable bit Position */ -#define MPU_RASR_ENABLE_Msk (1UL /*<< MPU_RASR_ENABLE_Pos*/) /*!< MPU RASR: Region enable bit Disable Mask */ - -/*@} end of group CMSIS_MPU */ -#endif /* defined (__MPU_PRESENT) && (__MPU_PRESENT == 1U) */ - - -/** - \ingroup CMSIS_core_register - \defgroup CMSIS_FPU Floating Point Unit (FPU) - \brief Type definitions for the Floating Point Unit (FPU) - @{ - */ - -/** - \brief Structure type to access the Floating Point Unit (FPU). - */ -typedef struct -{ - uint32_t RESERVED0[1U]; - __IOM uint32_t FPCCR; /*!< Offset: 0x004 (R/W) Floating-Point Context Control Register */ - __IOM uint32_t FPCAR; /*!< Offset: 0x008 (R/W) Floating-Point Context Address Register */ - __IOM uint32_t FPDSCR; /*!< Offset: 0x00C (R/W) Floating-Point Default Status Control Register */ - __IM uint32_t MVFR0; /*!< Offset: 0x010 (R/ ) Media and FP Feature Register 0 */ - __IM uint32_t MVFR1; /*!< Offset: 0x014 (R/ ) Media and FP Feature Register 1 */ -} FPU_Type; - -/* Floating-Point Context Control Register Definitions */ -#define FPU_FPCCR_ASPEN_Pos 31U /*!< FPCCR: ASPEN bit Position */ -#define FPU_FPCCR_ASPEN_Msk (1UL << FPU_FPCCR_ASPEN_Pos) /*!< FPCCR: ASPEN bit Mask */ - -#define FPU_FPCCR_LSPEN_Pos 30U /*!< FPCCR: LSPEN Position */ -#define FPU_FPCCR_LSPEN_Msk (1UL << FPU_FPCCR_LSPEN_Pos) /*!< FPCCR: LSPEN bit Mask */ - -#define FPU_FPCCR_MONRDY_Pos 8U /*!< FPCCR: MONRDY Position */ -#define FPU_FPCCR_MONRDY_Msk (1UL << FPU_FPCCR_MONRDY_Pos) /*!< FPCCR: MONRDY bit Mask */ - -#define FPU_FPCCR_BFRDY_Pos 6U /*!< FPCCR: BFRDY Position */ -#define FPU_FPCCR_BFRDY_Msk (1UL << FPU_FPCCR_BFRDY_Pos) /*!< FPCCR: BFRDY bit Mask */ - -#define FPU_FPCCR_MMRDY_Pos 5U /*!< FPCCR: MMRDY Position */ -#define FPU_FPCCR_MMRDY_Msk (1UL << FPU_FPCCR_MMRDY_Pos) /*!< FPCCR: MMRDY bit Mask */ - -#define FPU_FPCCR_HFRDY_Pos 4U /*!< FPCCR: HFRDY Position */ -#define FPU_FPCCR_HFRDY_Msk (1UL << FPU_FPCCR_HFRDY_Pos) /*!< FPCCR: HFRDY bit Mask */ - -#define FPU_FPCCR_THREAD_Pos 3U /*!< FPCCR: processor mode bit Position */ -#define FPU_FPCCR_THREAD_Msk (1UL << FPU_FPCCR_THREAD_Pos) /*!< FPCCR: processor mode active bit Mask */ - -#define FPU_FPCCR_USER_Pos 1U /*!< FPCCR: privilege level bit Position */ -#define FPU_FPCCR_USER_Msk (1UL << FPU_FPCCR_USER_Pos) /*!< FPCCR: privilege level bit Mask */ - -#define FPU_FPCCR_LSPACT_Pos 0U /*!< FPCCR: Lazy state preservation active bit Position */ -#define FPU_FPCCR_LSPACT_Msk (1UL /*<< FPU_FPCCR_LSPACT_Pos*/) /*!< FPCCR: Lazy state preservation active bit Mask */ - -/* Floating-Point Context Address Register Definitions */ -#define FPU_FPCAR_ADDRESS_Pos 3U /*!< FPCAR: ADDRESS bit Position */ -#define FPU_FPCAR_ADDRESS_Msk (0x1FFFFFFFUL << FPU_FPCAR_ADDRESS_Pos) /*!< FPCAR: ADDRESS bit Mask */ - -/* Floating-Point Default Status Control Register Definitions */ -#define FPU_FPDSCR_AHP_Pos 26U /*!< FPDSCR: AHP bit Position */ -#define FPU_FPDSCR_AHP_Msk (1UL << FPU_FPDSCR_AHP_Pos) /*!< FPDSCR: AHP bit Mask */ - -#define FPU_FPDSCR_DN_Pos 25U /*!< FPDSCR: DN bit Position */ -#define FPU_FPDSCR_DN_Msk (1UL << FPU_FPDSCR_DN_Pos) /*!< FPDSCR: DN bit Mask */ - -#define FPU_FPDSCR_FZ_Pos 24U /*!< FPDSCR: FZ bit Position */ -#define FPU_FPDSCR_FZ_Msk (1UL << FPU_FPDSCR_FZ_Pos) /*!< FPDSCR: FZ bit Mask */ - -#define FPU_FPDSCR_RMode_Pos 22U /*!< FPDSCR: RMode bit Position */ -#define FPU_FPDSCR_RMode_Msk (3UL << FPU_FPDSCR_RMode_Pos) /*!< FPDSCR: RMode bit Mask */ - -/* Media and FP Feature Register 0 Definitions */ -#define FPU_MVFR0_FP_rounding_modes_Pos 28U /*!< MVFR0: FP rounding modes bits Position */ -#define FPU_MVFR0_FP_rounding_modes_Msk (0xFUL << FPU_MVFR0_FP_rounding_modes_Pos) /*!< MVFR0: FP rounding modes bits Mask */ - -#define FPU_MVFR0_Short_vectors_Pos 24U /*!< MVFR0: Short vectors bits Position */ -#define FPU_MVFR0_Short_vectors_Msk (0xFUL << FPU_MVFR0_Short_vectors_Pos) /*!< MVFR0: Short vectors bits Mask */ - -#define FPU_MVFR0_Square_root_Pos 20U /*!< MVFR0: Square root bits Position */ -#define FPU_MVFR0_Square_root_Msk (0xFUL << FPU_MVFR0_Square_root_Pos) /*!< MVFR0: Square root bits Mask */ - -#define FPU_MVFR0_Divide_Pos 16U /*!< MVFR0: Divide bits Position */ -#define FPU_MVFR0_Divide_Msk (0xFUL << FPU_MVFR0_Divide_Pos) /*!< MVFR0: Divide bits Mask */ - -#define FPU_MVFR0_FP_excep_trapping_Pos 12U /*!< MVFR0: FP exception trapping bits Position */ -#define FPU_MVFR0_FP_excep_trapping_Msk (0xFUL << FPU_MVFR0_FP_excep_trapping_Pos) /*!< MVFR0: FP exception trapping bits Mask */ - -#define FPU_MVFR0_Double_precision_Pos 8U /*!< MVFR0: Double-precision bits Position */ -#define FPU_MVFR0_Double_precision_Msk (0xFUL << FPU_MVFR0_Double_precision_Pos) /*!< MVFR0: Double-precision bits Mask */ - -#define FPU_MVFR0_Single_precision_Pos 4U /*!< MVFR0: Single-precision bits Position */ -#define FPU_MVFR0_Single_precision_Msk (0xFUL << FPU_MVFR0_Single_precision_Pos) /*!< MVFR0: Single-precision bits Mask */ - -#define FPU_MVFR0_A_SIMD_registers_Pos 0U /*!< MVFR0: A_SIMD registers bits Position */ -#define FPU_MVFR0_A_SIMD_registers_Msk (0xFUL /*<< FPU_MVFR0_A_SIMD_registers_Pos*/) /*!< MVFR0: A_SIMD registers bits Mask */ - -/* Media and FP Feature Register 1 Definitions */ -#define FPU_MVFR1_FP_fused_MAC_Pos 28U /*!< MVFR1: FP fused MAC bits Position */ -#define FPU_MVFR1_FP_fused_MAC_Msk (0xFUL << FPU_MVFR1_FP_fused_MAC_Pos) /*!< MVFR1: FP fused MAC bits Mask */ - -#define FPU_MVFR1_FP_HPFP_Pos 24U /*!< MVFR1: FP HPFP bits Position */ -#define FPU_MVFR1_FP_HPFP_Msk (0xFUL << FPU_MVFR1_FP_HPFP_Pos) /*!< MVFR1: FP HPFP bits Mask */ - -#define FPU_MVFR1_D_NaN_mode_Pos 4U /*!< MVFR1: D_NaN mode bits Position */ -#define FPU_MVFR1_D_NaN_mode_Msk (0xFUL << FPU_MVFR1_D_NaN_mode_Pos) /*!< MVFR1: D_NaN mode bits Mask */ - -#define FPU_MVFR1_FtZ_mode_Pos 0U /*!< MVFR1: FtZ mode bits Position */ -#define FPU_MVFR1_FtZ_mode_Msk (0xFUL /*<< FPU_MVFR1_FtZ_mode_Pos*/) /*!< MVFR1: FtZ mode bits Mask */ - -/*@} end of group CMSIS_FPU */ - - -/** - \ingroup CMSIS_core_register - \defgroup CMSIS_CoreDebug Core Debug Registers (CoreDebug) - \brief Type definitions for the Core Debug Registers - @{ - */ - -/** - \brief Structure type to access the Core Debug Register (CoreDebug). - */ -typedef struct -{ - __IOM uint32_t DHCSR; /*!< Offset: 0x000 (R/W) Debug Halting Control and Status Register */ - __OM uint32_t DCRSR; /*!< Offset: 0x004 ( /W) Debug Core Register Selector Register */ - __IOM uint32_t DCRDR; /*!< Offset: 0x008 (R/W) Debug Core Register Data Register */ - __IOM uint32_t DEMCR; /*!< Offset: 0x00C (R/W) Debug Exception and Monitor Control Register */ -} CoreDebug_Type; - -/* Debug Halting Control and Status Register Definitions */ -#define CoreDebug_DHCSR_DBGKEY_Pos 16U /*!< CoreDebug DHCSR: DBGKEY Position */ -#define CoreDebug_DHCSR_DBGKEY_Msk (0xFFFFUL << CoreDebug_DHCSR_DBGKEY_Pos) /*!< CoreDebug DHCSR: DBGKEY Mask */ - -#define CoreDebug_DHCSR_S_RESET_ST_Pos 25U /*!< CoreDebug DHCSR: S_RESET_ST Position */ -#define CoreDebug_DHCSR_S_RESET_ST_Msk (1UL << CoreDebug_DHCSR_S_RESET_ST_Pos) /*!< CoreDebug DHCSR: S_RESET_ST Mask */ - -#define CoreDebug_DHCSR_S_RETIRE_ST_Pos 24U /*!< CoreDebug DHCSR: S_RETIRE_ST Position */ -#define CoreDebug_DHCSR_S_RETIRE_ST_Msk (1UL << CoreDebug_DHCSR_S_RETIRE_ST_Pos) /*!< CoreDebug DHCSR: S_RETIRE_ST Mask */ - -#define CoreDebug_DHCSR_S_LOCKUP_Pos 19U /*!< CoreDebug DHCSR: S_LOCKUP Position */ -#define CoreDebug_DHCSR_S_LOCKUP_Msk (1UL << CoreDebug_DHCSR_S_LOCKUP_Pos) /*!< CoreDebug DHCSR: S_LOCKUP Mask */ - -#define CoreDebug_DHCSR_S_SLEEP_Pos 18U /*!< CoreDebug DHCSR: S_SLEEP Position */ -#define CoreDebug_DHCSR_S_SLEEP_Msk (1UL << CoreDebug_DHCSR_S_SLEEP_Pos) /*!< CoreDebug DHCSR: S_SLEEP Mask */ - -#define CoreDebug_DHCSR_S_HALT_Pos 17U /*!< CoreDebug DHCSR: S_HALT Position */ -#define CoreDebug_DHCSR_S_HALT_Msk (1UL << CoreDebug_DHCSR_S_HALT_Pos) /*!< CoreDebug DHCSR: S_HALT Mask */ - -#define CoreDebug_DHCSR_S_REGRDY_Pos 16U /*!< CoreDebug DHCSR: S_REGRDY Position */ -#define CoreDebug_DHCSR_S_REGRDY_Msk (1UL << CoreDebug_DHCSR_S_REGRDY_Pos) /*!< CoreDebug DHCSR: S_REGRDY Mask */ - -#define CoreDebug_DHCSR_C_SNAPSTALL_Pos 5U /*!< CoreDebug DHCSR: C_SNAPSTALL Position */ -#define CoreDebug_DHCSR_C_SNAPSTALL_Msk (1UL << CoreDebug_DHCSR_C_SNAPSTALL_Pos) /*!< CoreDebug DHCSR: C_SNAPSTALL Mask */ - -#define CoreDebug_DHCSR_C_MASKINTS_Pos 3U /*!< CoreDebug DHCSR: C_MASKINTS Position */ -#define CoreDebug_DHCSR_C_MASKINTS_Msk (1UL << CoreDebug_DHCSR_C_MASKINTS_Pos) /*!< CoreDebug DHCSR: C_MASKINTS Mask */ - -#define CoreDebug_DHCSR_C_STEP_Pos 2U /*!< CoreDebug DHCSR: C_STEP Position */ -#define CoreDebug_DHCSR_C_STEP_Msk (1UL << CoreDebug_DHCSR_C_STEP_Pos) /*!< CoreDebug DHCSR: C_STEP Mask */ - -#define CoreDebug_DHCSR_C_HALT_Pos 1U /*!< CoreDebug DHCSR: C_HALT Position */ -#define CoreDebug_DHCSR_C_HALT_Msk (1UL << CoreDebug_DHCSR_C_HALT_Pos) /*!< CoreDebug DHCSR: C_HALT Mask */ - -#define CoreDebug_DHCSR_C_DEBUGEN_Pos 0U /*!< CoreDebug DHCSR: C_DEBUGEN Position */ -#define CoreDebug_DHCSR_C_DEBUGEN_Msk (1UL /*<< CoreDebug_DHCSR_C_DEBUGEN_Pos*/) /*!< CoreDebug DHCSR: C_DEBUGEN Mask */ - -/* Debug Core Register Selector Register Definitions */ -#define CoreDebug_DCRSR_REGWnR_Pos 16U /*!< CoreDebug DCRSR: REGWnR Position */ -#define CoreDebug_DCRSR_REGWnR_Msk (1UL << CoreDebug_DCRSR_REGWnR_Pos) /*!< CoreDebug DCRSR: REGWnR Mask */ - -#define CoreDebug_DCRSR_REGSEL_Pos 0U /*!< CoreDebug DCRSR: REGSEL Position */ -#define CoreDebug_DCRSR_REGSEL_Msk (0x1FUL /*<< CoreDebug_DCRSR_REGSEL_Pos*/) /*!< CoreDebug DCRSR: REGSEL Mask */ - -/* Debug Exception and Monitor Control Register Definitions */ -#define CoreDebug_DEMCR_TRCENA_Pos 24U /*!< CoreDebug DEMCR: TRCENA Position */ -#define CoreDebug_DEMCR_TRCENA_Msk (1UL << CoreDebug_DEMCR_TRCENA_Pos) /*!< CoreDebug DEMCR: TRCENA Mask */ - -#define CoreDebug_DEMCR_MON_REQ_Pos 19U /*!< CoreDebug DEMCR: MON_REQ Position */ -#define CoreDebug_DEMCR_MON_REQ_Msk (1UL << CoreDebug_DEMCR_MON_REQ_Pos) /*!< CoreDebug DEMCR: MON_REQ Mask */ - -#define CoreDebug_DEMCR_MON_STEP_Pos 18U /*!< CoreDebug DEMCR: MON_STEP Position */ -#define CoreDebug_DEMCR_MON_STEP_Msk (1UL << CoreDebug_DEMCR_MON_STEP_Pos) /*!< CoreDebug DEMCR: MON_STEP Mask */ - -#define CoreDebug_DEMCR_MON_PEND_Pos 17U /*!< CoreDebug DEMCR: MON_PEND Position */ -#define CoreDebug_DEMCR_MON_PEND_Msk (1UL << CoreDebug_DEMCR_MON_PEND_Pos) /*!< CoreDebug DEMCR: MON_PEND Mask */ - -#define CoreDebug_DEMCR_MON_EN_Pos 16U /*!< CoreDebug DEMCR: MON_EN Position */ -#define CoreDebug_DEMCR_MON_EN_Msk (1UL << CoreDebug_DEMCR_MON_EN_Pos) /*!< CoreDebug DEMCR: MON_EN Mask */ - -#define CoreDebug_DEMCR_VC_HARDERR_Pos 10U /*!< CoreDebug DEMCR: VC_HARDERR Position */ -#define CoreDebug_DEMCR_VC_HARDERR_Msk (1UL << CoreDebug_DEMCR_VC_HARDERR_Pos) /*!< CoreDebug DEMCR: VC_HARDERR Mask */ - -#define CoreDebug_DEMCR_VC_INTERR_Pos 9U /*!< CoreDebug DEMCR: VC_INTERR Position */ -#define CoreDebug_DEMCR_VC_INTERR_Msk (1UL << CoreDebug_DEMCR_VC_INTERR_Pos) /*!< CoreDebug DEMCR: VC_INTERR Mask */ - -#define CoreDebug_DEMCR_VC_BUSERR_Pos 8U /*!< CoreDebug DEMCR: VC_BUSERR Position */ -#define CoreDebug_DEMCR_VC_BUSERR_Msk (1UL << CoreDebug_DEMCR_VC_BUSERR_Pos) /*!< CoreDebug DEMCR: VC_BUSERR Mask */ - -#define CoreDebug_DEMCR_VC_STATERR_Pos 7U /*!< CoreDebug DEMCR: VC_STATERR Position */ -#define CoreDebug_DEMCR_VC_STATERR_Msk (1UL << CoreDebug_DEMCR_VC_STATERR_Pos) /*!< CoreDebug DEMCR: VC_STATERR Mask */ - -#define CoreDebug_DEMCR_VC_CHKERR_Pos 6U /*!< CoreDebug DEMCR: VC_CHKERR Position */ -#define CoreDebug_DEMCR_VC_CHKERR_Msk (1UL << CoreDebug_DEMCR_VC_CHKERR_Pos) /*!< CoreDebug DEMCR: VC_CHKERR Mask */ - -#define CoreDebug_DEMCR_VC_NOCPERR_Pos 5U /*!< CoreDebug DEMCR: VC_NOCPERR Position */ -#define CoreDebug_DEMCR_VC_NOCPERR_Msk (1UL << CoreDebug_DEMCR_VC_NOCPERR_Pos) /*!< CoreDebug DEMCR: VC_NOCPERR Mask */ - -#define CoreDebug_DEMCR_VC_MMERR_Pos 4U /*!< CoreDebug DEMCR: VC_MMERR Position */ -#define CoreDebug_DEMCR_VC_MMERR_Msk (1UL << CoreDebug_DEMCR_VC_MMERR_Pos) /*!< CoreDebug DEMCR: VC_MMERR Mask */ - -#define CoreDebug_DEMCR_VC_CORERESET_Pos 0U /*!< CoreDebug DEMCR: VC_CORERESET Position */ -#define CoreDebug_DEMCR_VC_CORERESET_Msk (1UL /*<< CoreDebug_DEMCR_VC_CORERESET_Pos*/) /*!< CoreDebug DEMCR: VC_CORERESET Mask */ - -/*@} end of group CMSIS_CoreDebug */ - - -/** - \ingroup CMSIS_core_register - \defgroup CMSIS_core_bitfield Core register bit field macros - \brief Macros for use with bit field definitions (xxx_Pos, xxx_Msk). - @{ - */ - -/** - \brief Mask and shift a bit field value for use in a register bit range. - \param[in] field Name of the register bit field. - \param[in] value Value of the bit field. This parameter is interpreted as an uint32_t type. - \return Masked and shifted value. -*/ -#define _VAL2FLD(field, value) (((uint32_t)(value) << field ## _Pos) & field ## _Msk) - -/** - \brief Mask and shift a register value to extract a bit filed value. - \param[in] field Name of the register bit field. - \param[in] value Value of register. This parameter is interpreted as an uint32_t type. - \return Masked and shifted bit field value. -*/ -#define _FLD2VAL(field, value) (((uint32_t)(value) & field ## _Msk) >> field ## _Pos) - -/*@} end of group CMSIS_core_bitfield */ - - -/** - \ingroup CMSIS_core_register - \defgroup CMSIS_core_base Core Definitions - \brief Definitions for base addresses, unions, and structures. - @{ - */ - -/* Memory mapping of Core Hardware */ -#define SCS_BASE (0xE000E000UL) /*!< System Control Space Base Address */ -#define ITM_BASE (0xE0000000UL) /*!< ITM Base Address */ -#define DWT_BASE (0xE0001000UL) /*!< DWT Base Address */ -#define TPI_BASE (0xE0040000UL) /*!< TPI Base Address */ -#define CoreDebug_BASE (0xE000EDF0UL) /*!< Core Debug Base Address */ -#define SysTick_BASE (SCS_BASE + 0x0010UL) /*!< SysTick Base Address */ -#define NVIC_BASE (SCS_BASE + 0x0100UL) /*!< NVIC Base Address */ -#define SCB_BASE (SCS_BASE + 0x0D00UL) /*!< System Control Block Base Address */ - -#define SCnSCB ((SCnSCB_Type *) SCS_BASE ) /*!< System control Register not in SCB */ -#define SCB ((SCB_Type *) SCB_BASE ) /*!< SCB configuration struct */ -#define SysTick ((SysTick_Type *) SysTick_BASE ) /*!< SysTick configuration struct */ -#define NVIC ((NVIC_Type *) NVIC_BASE ) /*!< NVIC configuration struct */ -#define ITM ((ITM_Type *) ITM_BASE ) /*!< ITM configuration struct */ -#define DWT ((DWT_Type *) DWT_BASE ) /*!< DWT configuration struct */ -#define TPI ((TPI_Type *) TPI_BASE ) /*!< TPI configuration struct */ -#define CoreDebug ((CoreDebug_Type *) CoreDebug_BASE) /*!< Core Debug configuration struct */ - -#if defined (__MPU_PRESENT) && (__MPU_PRESENT == 1U) - #define MPU_BASE (SCS_BASE + 0x0D90UL) /*!< Memory Protection Unit */ - #define MPU ((MPU_Type *) MPU_BASE ) /*!< Memory Protection Unit */ -#endif - -#define FPU_BASE (SCS_BASE + 0x0F30UL) /*!< Floating Point Unit */ -#define FPU ((FPU_Type *) FPU_BASE ) /*!< Floating Point Unit */ - -/*@} */ - - - -/******************************************************************************* - * Hardware Abstraction Layer - Core Function Interface contains: - - Core NVIC Functions - - Core SysTick Functions - - Core Debug Functions - - Core Register Access Functions - ******************************************************************************/ -/** - \defgroup CMSIS_Core_FunctionInterface Functions and Instructions Reference -*/ - - - -/* ########################## NVIC functions #################################### */ -/** - \ingroup CMSIS_Core_FunctionInterface - \defgroup CMSIS_Core_NVICFunctions NVIC Functions - \brief Functions that manage interrupts and exceptions via the NVIC. - @{ - */ - -#ifdef CMSIS_NVIC_VIRTUAL - #ifndef CMSIS_NVIC_VIRTUAL_HEADER_FILE - #define CMSIS_NVIC_VIRTUAL_HEADER_FILE "cmsis_nvic_virtual.h" - #endif - #include CMSIS_NVIC_VIRTUAL_HEADER_FILE -#else - #define NVIC_SetPriorityGrouping __NVIC_SetPriorityGrouping - #define NVIC_GetPriorityGrouping __NVIC_GetPriorityGrouping - #define NVIC_EnableIRQ __NVIC_EnableIRQ - #define NVIC_GetEnableIRQ __NVIC_GetEnableIRQ - #define NVIC_DisableIRQ __NVIC_DisableIRQ - #define NVIC_GetPendingIRQ __NVIC_GetPendingIRQ - #define NVIC_SetPendingIRQ __NVIC_SetPendingIRQ - #define NVIC_ClearPendingIRQ __NVIC_ClearPendingIRQ - #define NVIC_GetActive __NVIC_GetActive - #define NVIC_SetPriority __NVIC_SetPriority - #define NVIC_GetPriority __NVIC_GetPriority - #define NVIC_SystemReset __NVIC_SystemReset -#endif /* CMSIS_NVIC_VIRTUAL */ - -#ifdef CMSIS_VECTAB_VIRTUAL - #ifndef CMSIS_VECTAB_VIRTUAL_HEADER_FILE - #define CMSIS_VECTAB_VIRTUAL_HEADER_FILE "cmsis_vectab_virtual.h" - #endif - #include CMSIS_VECTAB_VIRTUAL_HEADER_FILE -#else - #define NVIC_SetVector __NVIC_SetVector - #define NVIC_GetVector __NVIC_GetVector -#endif /* (CMSIS_VECTAB_VIRTUAL) */ - -#define NVIC_USER_IRQ_OFFSET 16 - - -/* The following EXC_RETURN values are saved the LR on exception entry */ -#define EXC_RETURN_HANDLER (0xFFFFFFF1UL) /* return to Handler mode, uses MSP after return */ -#define EXC_RETURN_THREAD_MSP (0xFFFFFFF9UL) /* return to Thread mode, uses MSP after return */ -#define EXC_RETURN_THREAD_PSP (0xFFFFFFFDUL) /* return to Thread mode, uses PSP after return */ -#define EXC_RETURN_HANDLER_FPU (0xFFFFFFE1UL) /* return to Handler mode, uses MSP after return, restore floating-point state */ -#define EXC_RETURN_THREAD_MSP_FPU (0xFFFFFFE9UL) /* return to Thread mode, uses MSP after return, restore floating-point state */ -#define EXC_RETURN_THREAD_PSP_FPU (0xFFFFFFEDUL) /* return to Thread mode, uses PSP after return, restore floating-point state */ - - -/** - \brief Set Priority Grouping - \details Sets the priority grouping field using the required unlock sequence. - The parameter PriorityGroup is assigned to the field SCB->AIRCR [10:8] PRIGROUP field. - Only values from 0..7 are used. - In case of a conflict between priority grouping and available - priority bits (__NVIC_PRIO_BITS), the smallest possible priority group is set. - \param [in] PriorityGroup Priority grouping field. - */ -__STATIC_INLINE void __NVIC_SetPriorityGrouping(uint32_t PriorityGroup) -{ - uint32_t reg_value; - uint32_t PriorityGroupTmp = (PriorityGroup & (uint32_t)0x07UL); /* only values 0..7 are used */ - - reg_value = SCB->AIRCR; /* read old register configuration */ - reg_value &= ~((uint32_t)(SCB_AIRCR_VECTKEY_Msk | SCB_AIRCR_PRIGROUP_Msk)); /* clear bits to change */ - reg_value = (reg_value | - ((uint32_t)0x5FAUL << SCB_AIRCR_VECTKEY_Pos) | - (PriorityGroupTmp << SCB_AIRCR_PRIGROUP_Pos) ); /* Insert write key and priority group */ - SCB->AIRCR = reg_value; -} - - -/** - \brief Get Priority Grouping - \details Reads the priority grouping field from the NVIC Interrupt Controller. - \return Priority grouping field (SCB->AIRCR [10:8] PRIGROUP field). - */ -__STATIC_INLINE uint32_t __NVIC_GetPriorityGrouping(void) -{ - return ((uint32_t)((SCB->AIRCR & SCB_AIRCR_PRIGROUP_Msk) >> SCB_AIRCR_PRIGROUP_Pos)); -} - - -/** - \brief Enable Interrupt - \details Enables a device specific interrupt in the NVIC interrupt controller. - \param [in] IRQn Device specific interrupt number. - \note IRQn must not be negative. - */ -__STATIC_INLINE void __NVIC_EnableIRQ(IRQn_Type IRQn) -{ - if ((int32_t)(IRQn) >= 0) - { - NVIC->ISER[(((uint32_t)IRQn) >> 5UL)] = (uint32_t)(1UL << (((uint32_t)IRQn) & 0x1FUL)); - } -} - - -/** - \brief Get Interrupt Enable status - \details Returns a device specific interrupt enable status from the NVIC interrupt controller. - \param [in] IRQn Device specific interrupt number. - \return 0 Interrupt is not enabled. - \return 1 Interrupt is enabled. - \note IRQn must not be negative. - */ -__STATIC_INLINE uint32_t __NVIC_GetEnableIRQ(IRQn_Type IRQn) -{ - if ((int32_t)(IRQn) >= 0) - { - return((uint32_t)(((NVIC->ISER[(((uint32_t)IRQn) >> 5UL)] & (1UL << (((uint32_t)IRQn) & 0x1FUL))) != 0UL) ? 1UL : 0UL)); - } - else - { - return(0U); - } -} - - -/** - \brief Disable Interrupt - \details Disables a device specific interrupt in the NVIC interrupt controller. - \param [in] IRQn Device specific interrupt number. - \note IRQn must not be negative. - */ -__STATIC_INLINE void __NVIC_DisableIRQ(IRQn_Type IRQn) -{ - if ((int32_t)(IRQn) >= 0) - { - NVIC->ICER[(((uint32_t)IRQn) >> 5UL)] = (uint32_t)(1UL << (((uint32_t)IRQn) & 0x1FUL)); - __DSB(); - __ISB(); - } -} - - -/** - \brief Get Pending Interrupt - \details Reads the NVIC pending register and returns the pending bit for the specified device specific interrupt. - \param [in] IRQn Device specific interrupt number. - \return 0 Interrupt status is not pending. - \return 1 Interrupt status is pending. - \note IRQn must not be negative. - */ -__STATIC_INLINE uint32_t __NVIC_GetPendingIRQ(IRQn_Type IRQn) -{ - if ((int32_t)(IRQn) >= 0) - { - return((uint32_t)(((NVIC->ISPR[(((uint32_t)IRQn) >> 5UL)] & (1UL << (((uint32_t)IRQn) & 0x1FUL))) != 0UL) ? 1UL : 0UL)); - } - else - { - return(0U); - } -} - - -/** - \brief Set Pending Interrupt - \details Sets the pending bit of a device specific interrupt in the NVIC pending register. - \param [in] IRQn Device specific interrupt number. - \note IRQn must not be negative. - */ -__STATIC_INLINE void __NVIC_SetPendingIRQ(IRQn_Type IRQn) -{ - if ((int32_t)(IRQn) >= 0) - { - NVIC->ISPR[(((uint32_t)IRQn) >> 5UL)] = (uint32_t)(1UL << (((uint32_t)IRQn) & 0x1FUL)); - } -} - - -/** - \brief Clear Pending Interrupt - \details Clears the pending bit of a device specific interrupt in the NVIC pending register. - \param [in] IRQn Device specific interrupt number. - \note IRQn must not be negative. - */ -__STATIC_INLINE void __NVIC_ClearPendingIRQ(IRQn_Type IRQn) -{ - if ((int32_t)(IRQn) >= 0) - { - NVIC->ICPR[(((uint32_t)IRQn) >> 5UL)] = (uint32_t)(1UL << (((uint32_t)IRQn) & 0x1FUL)); - } -} - - -/** - \brief Get Active Interrupt - \details Reads the active register in the NVIC and returns the active bit for the device specific interrupt. - \param [in] IRQn Device specific interrupt number. - \return 0 Interrupt status is not active. - \return 1 Interrupt status is active. - \note IRQn must not be negative. - */ -__STATIC_INLINE uint32_t __NVIC_GetActive(IRQn_Type IRQn) -{ - if ((int32_t)(IRQn) >= 0) - { - return((uint32_t)(((NVIC->IABR[(((uint32_t)IRQn) >> 5UL)] & (1UL << (((uint32_t)IRQn) & 0x1FUL))) != 0UL) ? 1UL : 0UL)); - } - else - { - return(0U); - } -} - - -/** - \brief Set Interrupt Priority - \details Sets the priority of a device specific interrupt or a processor exception. - The interrupt number can be positive to specify a device specific interrupt, - or negative to specify a processor exception. - \param [in] IRQn Interrupt number. - \param [in] priority Priority to set. - \note The priority cannot be set for every processor exception. - */ -__STATIC_INLINE void __NVIC_SetPriority(IRQn_Type IRQn, uint32_t priority) -{ - if ((int32_t)(IRQn) >= 0) - { - NVIC->IP[((uint32_t)IRQn)] = (uint8_t)((priority << (8U - __NVIC_PRIO_BITS)) & (uint32_t)0xFFUL); - } - else - { - SCB->SHP[(((uint32_t)IRQn) & 0xFUL)-4UL] = (uint8_t)((priority << (8U - __NVIC_PRIO_BITS)) & (uint32_t)0xFFUL); - } -} - - -/** - \brief Get Interrupt Priority - \details Reads the priority of a device specific interrupt or a processor exception. - The interrupt number can be positive to specify a device specific interrupt, - or negative to specify a processor exception. - \param [in] IRQn Interrupt number. - \return Interrupt Priority. - Value is aligned automatically to the implemented priority bits of the microcontroller. - */ -__STATIC_INLINE uint32_t __NVIC_GetPriority(IRQn_Type IRQn) -{ - - if ((int32_t)(IRQn) >= 0) - { - return(((uint32_t)NVIC->IP[((uint32_t)IRQn)] >> (8U - __NVIC_PRIO_BITS))); - } - else - { - return(((uint32_t)SCB->SHP[(((uint32_t)IRQn) & 0xFUL)-4UL] >> (8U - __NVIC_PRIO_BITS))); - } -} - - -/** - \brief Encode Priority - \details Encodes the priority for an interrupt with the given priority group, - preemptive priority value, and subpriority value. - In case of a conflict between priority grouping and available - priority bits (__NVIC_PRIO_BITS), the smallest possible priority group is set. - \param [in] PriorityGroup Used priority group. - \param [in] PreemptPriority Preemptive priority value (starting from 0). - \param [in] SubPriority Subpriority value (starting from 0). - \return Encoded priority. Value can be used in the function \ref NVIC_SetPriority(). - */ -__STATIC_INLINE uint32_t NVIC_EncodePriority (uint32_t PriorityGroup, uint32_t PreemptPriority, uint32_t SubPriority) -{ - uint32_t PriorityGroupTmp = (PriorityGroup & (uint32_t)0x07UL); /* only values 0..7 are used */ - uint32_t PreemptPriorityBits; - uint32_t SubPriorityBits; - - PreemptPriorityBits = ((7UL - PriorityGroupTmp) > (uint32_t)(__NVIC_PRIO_BITS)) ? (uint32_t)(__NVIC_PRIO_BITS) : (uint32_t)(7UL - PriorityGroupTmp); - SubPriorityBits = ((PriorityGroupTmp + (uint32_t)(__NVIC_PRIO_BITS)) < (uint32_t)7UL) ? (uint32_t)0UL : (uint32_t)((PriorityGroupTmp - 7UL) + (uint32_t)(__NVIC_PRIO_BITS)); - - return ( - ((PreemptPriority & (uint32_t)((1UL << (PreemptPriorityBits)) - 1UL)) << SubPriorityBits) | - ((SubPriority & (uint32_t)((1UL << (SubPriorityBits )) - 1UL))) - ); -} - - -/** - \brief Decode Priority - \details Decodes an interrupt priority value with a given priority group to - preemptive priority value and subpriority value. - In case of a conflict between priority grouping and available - priority bits (__NVIC_PRIO_BITS) the smallest possible priority group is set. - \param [in] Priority Priority value, which can be retrieved with the function \ref NVIC_GetPriority(). - \param [in] PriorityGroup Used priority group. - \param [out] pPreemptPriority Preemptive priority value (starting from 0). - \param [out] pSubPriority Subpriority value (starting from 0). - */ -__STATIC_INLINE void NVIC_DecodePriority (uint32_t Priority, uint32_t PriorityGroup, uint32_t* const pPreemptPriority, uint32_t* const pSubPriority) -{ - uint32_t PriorityGroupTmp = (PriorityGroup & (uint32_t)0x07UL); /* only values 0..7 are used */ - uint32_t PreemptPriorityBits; - uint32_t SubPriorityBits; - - PreemptPriorityBits = ((7UL - PriorityGroupTmp) > (uint32_t)(__NVIC_PRIO_BITS)) ? (uint32_t)(__NVIC_PRIO_BITS) : (uint32_t)(7UL - PriorityGroupTmp); - SubPriorityBits = ((PriorityGroupTmp + (uint32_t)(__NVIC_PRIO_BITS)) < (uint32_t)7UL) ? (uint32_t)0UL : (uint32_t)((PriorityGroupTmp - 7UL) + (uint32_t)(__NVIC_PRIO_BITS)); - - *pPreemptPriority = (Priority >> SubPriorityBits) & (uint32_t)((1UL << (PreemptPriorityBits)) - 1UL); - *pSubPriority = (Priority ) & (uint32_t)((1UL << (SubPriorityBits )) - 1UL); -} - - -/** - \brief Set Interrupt Vector - \details Sets an interrupt vector in SRAM based interrupt vector table. - The interrupt number can be positive to specify a device specific interrupt, - or negative to specify a processor exception. - VTOR must been relocated to SRAM before. - \param [in] IRQn Interrupt number - \param [in] vector Address of interrupt handler function - */ -__STATIC_INLINE void __NVIC_SetVector(IRQn_Type IRQn, uint32_t vector) -{ - uint32_t *vectors = (uint32_t *)SCB->VTOR; - vectors[(int32_t)IRQn + NVIC_USER_IRQ_OFFSET] = vector; -} - - -/** - \brief Get Interrupt Vector - \details Reads an interrupt vector from interrupt vector table. - The interrupt number can be positive to specify a device specific interrupt, - or negative to specify a processor exception. - \param [in] IRQn Interrupt number. - \return Address of interrupt handler function - */ -__STATIC_INLINE uint32_t __NVIC_GetVector(IRQn_Type IRQn) -{ - uint32_t *vectors = (uint32_t *)SCB->VTOR; - return vectors[(int32_t)IRQn + NVIC_USER_IRQ_OFFSET]; -} - - -/** - \brief System Reset - \details Initiates a system reset request to reset the MCU. - */ -__NO_RETURN __STATIC_INLINE void __NVIC_SystemReset(void) -{ - __DSB(); /* Ensure all outstanding memory accesses included - buffered write are completed before reset */ - SCB->AIRCR = (uint32_t)((0x5FAUL << SCB_AIRCR_VECTKEY_Pos) | - (SCB->AIRCR & SCB_AIRCR_PRIGROUP_Msk) | - SCB_AIRCR_SYSRESETREQ_Msk ); /* Keep priority group unchanged */ - __DSB(); /* Ensure completion of memory access */ - - for(;;) /* wait until reset */ - { - __NOP(); - } -} - -/*@} end of CMSIS_Core_NVICFunctions */ - -/* ########################## MPU functions #################################### */ - -#if defined (__MPU_PRESENT) && (__MPU_PRESENT == 1U) - -#include "mpu_armv7.h" - -#endif - - -/* ########################## FPU functions #################################### */ -/** - \ingroup CMSIS_Core_FunctionInterface - \defgroup CMSIS_Core_FpuFunctions FPU Functions - \brief Function that provides FPU type. - @{ - */ - -/** - \brief get FPU type - \details returns the FPU type - \returns - - \b 0: No FPU - - \b 1: Single precision FPU - - \b 2: Double + Single precision FPU - */ -__STATIC_INLINE uint32_t SCB_GetFPUType(void) -{ - uint32_t mvfr0; - - mvfr0 = FPU->MVFR0; - if ((mvfr0 & (FPU_MVFR0_Single_precision_Msk | FPU_MVFR0_Double_precision_Msk)) == 0x020U) - { - return 1U; /* Single precision FPU */ - } - else - { - return 0U; /* No FPU */ - } -} - - -/*@} end of CMSIS_Core_FpuFunctions */ - - - -/* ################################## SysTick function ############################################ */ -/** - \ingroup CMSIS_Core_FunctionInterface - \defgroup CMSIS_Core_SysTickFunctions SysTick Functions - \brief Functions that configure the System. - @{ - */ - -#if defined (__Vendor_SysTickConfig) && (__Vendor_SysTickConfig == 0U) - -/** - \brief System Tick Configuration - \details Initializes the System Timer and its interrupt, and starts the System Tick Timer. - Counter is in free running mode to generate periodic interrupts. - \param [in] ticks Number of ticks between two interrupts. - \return 0 Function succeeded. - \return 1 Function failed. - \note When the variable __Vendor_SysTickConfig is set to 1, then the - function SysTick_Config is not included. In this case, the file device.h - must contain a vendor-specific implementation of this function. - */ -__STATIC_INLINE uint32_t SysTick_Config(uint32_t ticks) -{ - if ((ticks - 1UL) > SysTick_LOAD_RELOAD_Msk) - { - return (1UL); /* Reload value impossible */ - } - - SysTick->LOAD = (uint32_t)(ticks - 1UL); /* set reload register */ - NVIC_SetPriority (SysTick_IRQn, (1UL << __NVIC_PRIO_BITS) - 1UL); /* set Priority for Systick Interrupt */ - SysTick->VAL = 0UL; /* Load the SysTick Counter Value */ - SysTick->CTRL = SysTick_CTRL_CLKSOURCE_Msk | - SysTick_CTRL_TICKINT_Msk | - SysTick_CTRL_ENABLE_Msk; /* Enable SysTick IRQ and SysTick Timer */ - return (0UL); /* Function successful */ -} - -#endif - -/*@} end of CMSIS_Core_SysTickFunctions */ - - - -/* ##################################### Debug In/Output function ########################################### */ -/** - \ingroup CMSIS_Core_FunctionInterface - \defgroup CMSIS_core_DebugFunctions ITM Functions - \brief Functions that access the ITM debug interface. - @{ - */ - -extern volatile int32_t ITM_RxBuffer; /*!< External variable to receive characters. */ -#define ITM_RXBUFFER_EMPTY ((int32_t)0x5AA55AA5U) /*!< Value identifying \ref ITM_RxBuffer is ready for next character. */ - - -/** - \brief ITM Send Character - \details Transmits a character via the ITM channel 0, and - \li Just returns when no debugger is connected that has booked the output. - \li Is blocking when a debugger is connected, but the previous character sent has not been transmitted. - \param [in] ch Character to transmit. - \returns Character to transmit. - */ -__STATIC_INLINE uint32_t ITM_SendChar (uint32_t ch) -{ - if (((ITM->TCR & ITM_TCR_ITMENA_Msk) != 0UL) && /* ITM enabled */ - ((ITM->TER & 1UL ) != 0UL) ) /* ITM Port #0 enabled */ - { - while (ITM->PORT[0U].u32 == 0UL) - { - __NOP(); - } - ITM->PORT[0U].u8 = (uint8_t)ch; - } - return (ch); -} - - -/** - \brief ITM Receive Character - \details Inputs a character via the external variable \ref ITM_RxBuffer. - \return Received character. - \return -1 No character pending. - */ -__STATIC_INLINE int32_t ITM_ReceiveChar (void) -{ - int32_t ch = -1; /* no character available */ - - if (ITM_RxBuffer != ITM_RXBUFFER_EMPTY) - { - ch = ITM_RxBuffer; - ITM_RxBuffer = ITM_RXBUFFER_EMPTY; /* ready for next character */ - } - - return (ch); -} - - -/** - \brief ITM Check Character - \details Checks whether a character is pending for reading in the variable \ref ITM_RxBuffer. - \return 0 No character available. - \return 1 Character available. - */ -__STATIC_INLINE int32_t ITM_CheckChar (void) -{ - - if (ITM_RxBuffer == ITM_RXBUFFER_EMPTY) - { - return (0); /* no character available */ - } - else - { - return (1); /* character available */ - } -} - -/*@} end of CMSIS_core_DebugFunctions */ - - - - -#ifdef __cplusplus -} -#endif - -#endif /* __CORE_CM4_H_DEPENDANT */ - -#endif /* __CMSIS_GENERIC */ diff --git a/test_dma/Drivers/CMSIS/Include/core_cm7.h b/test_dma/Drivers/CMSIS/Include/core_cm7.h deleted file mode 100644 index ada6c2a..0000000 --- a/test_dma/Drivers/CMSIS/Include/core_cm7.h +++ /dev/null @@ -1,2671 +0,0 @@ -/**************************************************************************//** - * @file core_cm7.h - * @brief CMSIS Cortex-M7 Core Peripheral Access Layer Header File - * @version V5.0.8 - * @date 04. June 2018 - ******************************************************************************/ -/* - * Copyright (c) 2009-2018 Arm Limited. All rights reserved. - * - * SPDX-License-Identifier: Apache-2.0 - * - * Licensed under the Apache License, Version 2.0 (the License); you may - * not use this file except in compliance with the License. - * You may obtain a copy of the License at - * - * www.apache.org/licenses/LICENSE-2.0 - * - * Unless required by applicable law or agreed to in writing, software - * distributed under the License is distributed on an AS IS BASIS, WITHOUT - * WARRANTIES OR CONDITIONS OF ANY KIND, either express or implied. - * See the License for the specific language governing permissions and - * limitations under the License. - */ - -#if defined ( __ICCARM__ ) - #pragma system_include /* treat file as system include file for MISRA check */ -#elif defined (__clang__) - #pragma clang system_header /* treat file as system include file */ -#endif - -#ifndef __CORE_CM7_H_GENERIC -#define __CORE_CM7_H_GENERIC - -#include - -#ifdef __cplusplus - extern "C" { -#endif - -/** - \page CMSIS_MISRA_Exceptions MISRA-C:2004 Compliance Exceptions - CMSIS violates the following MISRA-C:2004 rules: - - \li Required Rule 8.5, object/function definition in header file.
- Function definitions in header files are used to allow 'inlining'. - - \li Required Rule 18.4, declaration of union type or object of union type: '{...}'.
- Unions are used for effective representation of core registers. - - \li Advisory Rule 19.7, Function-like macro defined.
- Function-like macros are used to allow more efficient code. - */ - - -/******************************************************************************* - * CMSIS definitions - ******************************************************************************/ -/** - \ingroup Cortex_M7 - @{ - */ - -#include "cmsis_version.h" - -/* CMSIS CM7 definitions */ -#define __CM7_CMSIS_VERSION_MAIN (__CM_CMSIS_VERSION_MAIN) /*!< \deprecated [31:16] CMSIS HAL main version */ -#define __CM7_CMSIS_VERSION_SUB ( __CM_CMSIS_VERSION_SUB) /*!< \deprecated [15:0] CMSIS HAL sub version */ -#define __CM7_CMSIS_VERSION ((__CM7_CMSIS_VERSION_MAIN << 16U) | \ - __CM7_CMSIS_VERSION_SUB ) /*!< \deprecated CMSIS HAL version number */ - -#define __CORTEX_M (7U) /*!< Cortex-M Core */ - -/** __FPU_USED indicates whether an FPU is used or not. - For this, __FPU_PRESENT has to be checked prior to making use of FPU specific registers and functions. -*/ -#if defined ( __CC_ARM ) - #if defined __TARGET_FPU_VFP - #if defined (__FPU_PRESENT) && (__FPU_PRESENT == 1U) - #define __FPU_USED 1U - #else - #error "Compiler generates FPU instructions for a device without an FPU (check __FPU_PRESENT)" - #define __FPU_USED 0U - #endif - #else - #define __FPU_USED 0U - #endif - -#elif defined (__ARMCC_VERSION) && (__ARMCC_VERSION >= 6010050) - #if defined __ARM_PCS_VFP - #if defined (__FPU_PRESENT) && (__FPU_PRESENT == 1U) - #define __FPU_USED 1U - #else - #warning "Compiler generates FPU instructions for a device without an FPU (check __FPU_PRESENT)" - #define __FPU_USED 0U - #endif - #else - #define __FPU_USED 0U - #endif - -#elif defined ( __GNUC__ ) - #if defined (__VFP_FP__) && !defined(__SOFTFP__) - #if defined (__FPU_PRESENT) && (__FPU_PRESENT == 1U) - #define __FPU_USED 1U - #else - #error "Compiler generates FPU instructions for a device without an FPU (check __FPU_PRESENT)" - #define __FPU_USED 0U - #endif - #else - #define __FPU_USED 0U - #endif - -#elif defined ( __ICCARM__ ) - #if defined __ARMVFP__ - #if defined (__FPU_PRESENT) && (__FPU_PRESENT == 1U) - #define __FPU_USED 1U - #else - #error "Compiler generates FPU instructions for a device without an FPU (check __FPU_PRESENT)" - #define __FPU_USED 0U - #endif - #else - #define __FPU_USED 0U - #endif - -#elif defined ( __TI_ARM__ ) - #if defined __TI_VFP_SUPPORT__ - #if defined (__FPU_PRESENT) && (__FPU_PRESENT == 1U) - #define __FPU_USED 1U - #else - #error "Compiler generates FPU instructions for a device without an FPU (check __FPU_PRESENT)" - #define __FPU_USED 0U - #endif - #else - #define __FPU_USED 0U - #endif - -#elif defined ( __TASKING__ ) - #if defined __FPU_VFP__ - #if defined (__FPU_PRESENT) && (__FPU_PRESENT == 1U) - #define __FPU_USED 1U - #else - #error "Compiler generates FPU instructions for a device without an FPU (check __FPU_PRESENT)" - #define __FPU_USED 0U - #endif - #else - #define __FPU_USED 0U - #endif - -#elif defined ( __CSMC__ ) - #if ( __CSMC__ & 0x400U) - #if defined (__FPU_PRESENT) && (__FPU_PRESENT == 1U) - #define __FPU_USED 1U - #else - #error "Compiler generates FPU instructions for a device without an FPU (check __FPU_PRESENT)" - #define __FPU_USED 0U - #endif - #else - #define __FPU_USED 0U - #endif - -#endif - -#include "cmsis_compiler.h" /* CMSIS compiler specific defines */ - - -#ifdef __cplusplus -} -#endif - -#endif /* __CORE_CM7_H_GENERIC */ - -#ifndef __CMSIS_GENERIC - -#ifndef __CORE_CM7_H_DEPENDANT -#define __CORE_CM7_H_DEPENDANT - -#ifdef __cplusplus - extern "C" { -#endif - -/* check device defines and use defaults */ -#if defined __CHECK_DEVICE_DEFINES - #ifndef __CM7_REV - #define __CM7_REV 0x0000U - #warning "__CM7_REV not defined in device header file; using default!" - #endif - - #ifndef __FPU_PRESENT - #define __FPU_PRESENT 0U - #warning "__FPU_PRESENT not defined in device header file; using default!" - #endif - - #ifndef __MPU_PRESENT - #define __MPU_PRESENT 0U - #warning "__MPU_PRESENT not defined in device header file; using default!" - #endif - - #ifndef __ICACHE_PRESENT - #define __ICACHE_PRESENT 0U - #warning "__ICACHE_PRESENT not defined in device header file; using default!" - #endif - - #ifndef __DCACHE_PRESENT - #define __DCACHE_PRESENT 0U - #warning "__DCACHE_PRESENT not defined in device header file; using default!" - #endif - - #ifndef __DTCM_PRESENT - #define __DTCM_PRESENT 0U - #warning "__DTCM_PRESENT not defined in device header file; using default!" - #endif - - #ifndef __NVIC_PRIO_BITS - #define __NVIC_PRIO_BITS 3U - #warning "__NVIC_PRIO_BITS not defined in device header file; using default!" - #endif - - #ifndef __Vendor_SysTickConfig - #define __Vendor_SysTickConfig 0U - #warning "__Vendor_SysTickConfig not defined in device header file; using default!" - #endif -#endif - -/* IO definitions (access restrictions to peripheral registers) */ -/** - \defgroup CMSIS_glob_defs CMSIS Global Defines - - IO Type Qualifiers are used - \li to specify the access to peripheral variables. - \li for automatic generation of peripheral register debug information. -*/ -#ifdef __cplusplus - #define __I volatile /*!< Defines 'read only' permissions */ -#else - #define __I volatile const /*!< Defines 'read only' permissions */ -#endif -#define __O volatile /*!< Defines 'write only' permissions */ -#define __IO volatile /*!< Defines 'read / write' permissions */ - -/* following defines should be used for structure members */ -#define __IM volatile const /*! Defines 'read only' structure member permissions */ -#define __OM volatile /*! Defines 'write only' structure member permissions */ -#define __IOM volatile /*! Defines 'read / write' structure member permissions */ - -/*@} end of group Cortex_M7 */ - - - -/******************************************************************************* - * Register Abstraction - Core Register contain: - - Core Register - - Core NVIC Register - - Core SCB Register - - Core SysTick Register - - Core Debug Register - - Core MPU Register - - Core FPU Register - ******************************************************************************/ -/** - \defgroup CMSIS_core_register Defines and Type Definitions - \brief Type definitions and defines for Cortex-M processor based devices. -*/ - -/** - \ingroup CMSIS_core_register - \defgroup CMSIS_CORE Status and Control Registers - \brief Core Register type definitions. - @{ - */ - -/** - \brief Union type to access the Application Program Status Register (APSR). - */ -typedef union -{ - struct - { - uint32_t _reserved0:16; /*!< bit: 0..15 Reserved */ - uint32_t GE:4; /*!< bit: 16..19 Greater than or Equal flags */ - uint32_t _reserved1:7; /*!< bit: 20..26 Reserved */ - uint32_t Q:1; /*!< bit: 27 Saturation condition flag */ - uint32_t V:1; /*!< bit: 28 Overflow condition code flag */ - uint32_t C:1; /*!< bit: 29 Carry condition code flag */ - uint32_t Z:1; /*!< bit: 30 Zero condition code flag */ - uint32_t N:1; /*!< bit: 31 Negative condition code flag */ - } b; /*!< Structure used for bit access */ - uint32_t w; /*!< Type used for word access */ -} APSR_Type; - -/* APSR Register Definitions */ -#define APSR_N_Pos 31U /*!< APSR: N Position */ -#define APSR_N_Msk (1UL << APSR_N_Pos) /*!< APSR: N Mask */ - -#define APSR_Z_Pos 30U /*!< APSR: Z Position */ -#define APSR_Z_Msk (1UL << APSR_Z_Pos) /*!< APSR: Z Mask */ - -#define APSR_C_Pos 29U /*!< APSR: C Position */ -#define APSR_C_Msk (1UL << APSR_C_Pos) /*!< APSR: C Mask */ - -#define APSR_V_Pos 28U /*!< APSR: V Position */ -#define APSR_V_Msk (1UL << APSR_V_Pos) /*!< APSR: V Mask */ - -#define APSR_Q_Pos 27U /*!< APSR: Q Position */ -#define APSR_Q_Msk (1UL << APSR_Q_Pos) /*!< APSR: Q Mask */ - -#define APSR_GE_Pos 16U /*!< APSR: GE Position */ -#define APSR_GE_Msk (0xFUL << APSR_GE_Pos) /*!< APSR: GE Mask */ - - -/** - \brief Union type to access the Interrupt Program Status Register (IPSR). - */ -typedef union -{ - struct - { - uint32_t ISR:9; /*!< bit: 0.. 8 Exception number */ - uint32_t _reserved0:23; /*!< bit: 9..31 Reserved */ - } b; /*!< Structure used for bit access */ - uint32_t w; /*!< Type used for word access */ -} IPSR_Type; - -/* IPSR Register Definitions */ -#define IPSR_ISR_Pos 0U /*!< IPSR: ISR Position */ -#define IPSR_ISR_Msk (0x1FFUL /*<< IPSR_ISR_Pos*/) /*!< IPSR: ISR Mask */ - - -/** - \brief Union type to access the Special-Purpose Program Status Registers (xPSR). - */ -typedef union -{ - struct - { - uint32_t ISR:9; /*!< bit: 0.. 8 Exception number */ - uint32_t _reserved0:1; /*!< bit: 9 Reserved */ - uint32_t ICI_IT_1:6; /*!< bit: 10..15 ICI/IT part 1 */ - uint32_t GE:4; /*!< bit: 16..19 Greater than or Equal flags */ - uint32_t _reserved1:4; /*!< bit: 20..23 Reserved */ - uint32_t T:1; /*!< bit: 24 Thumb bit */ - uint32_t ICI_IT_2:2; /*!< bit: 25..26 ICI/IT part 2 */ - uint32_t Q:1; /*!< bit: 27 Saturation condition flag */ - uint32_t V:1; /*!< bit: 28 Overflow condition code flag */ - uint32_t C:1; /*!< bit: 29 Carry condition code flag */ - uint32_t Z:1; /*!< bit: 30 Zero condition code flag */ - uint32_t N:1; /*!< bit: 31 Negative condition code flag */ - } b; /*!< Structure used for bit access */ - uint32_t w; /*!< Type used for word access */ -} xPSR_Type; - -/* xPSR Register Definitions */ -#define xPSR_N_Pos 31U /*!< xPSR: N Position */ -#define xPSR_N_Msk (1UL << xPSR_N_Pos) /*!< xPSR: N Mask */ - -#define xPSR_Z_Pos 30U /*!< xPSR: Z Position */ -#define xPSR_Z_Msk (1UL << xPSR_Z_Pos) /*!< xPSR: Z Mask */ - -#define xPSR_C_Pos 29U /*!< xPSR: C Position */ -#define xPSR_C_Msk (1UL << xPSR_C_Pos) /*!< xPSR: C Mask */ - -#define xPSR_V_Pos 28U /*!< xPSR: V Position */ -#define xPSR_V_Msk (1UL << xPSR_V_Pos) /*!< xPSR: V Mask */ - -#define xPSR_Q_Pos 27U /*!< xPSR: Q Position */ -#define xPSR_Q_Msk (1UL << xPSR_Q_Pos) /*!< xPSR: Q Mask */ - -#define xPSR_ICI_IT_2_Pos 25U /*!< xPSR: ICI/IT part 2 Position */ -#define xPSR_ICI_IT_2_Msk (3UL << xPSR_ICI_IT_2_Pos) /*!< xPSR: ICI/IT part 2 Mask */ - -#define xPSR_T_Pos 24U /*!< xPSR: T Position */ -#define xPSR_T_Msk (1UL << xPSR_T_Pos) /*!< xPSR: T Mask */ - -#define xPSR_GE_Pos 16U /*!< xPSR: GE Position */ -#define xPSR_GE_Msk (0xFUL << xPSR_GE_Pos) /*!< xPSR: GE Mask */ - -#define xPSR_ICI_IT_1_Pos 10U /*!< xPSR: ICI/IT part 1 Position */ -#define xPSR_ICI_IT_1_Msk (0x3FUL << xPSR_ICI_IT_1_Pos) /*!< xPSR: ICI/IT part 1 Mask */ - -#define xPSR_ISR_Pos 0U /*!< xPSR: ISR Position */ -#define xPSR_ISR_Msk (0x1FFUL /*<< xPSR_ISR_Pos*/) /*!< xPSR: ISR Mask */ - - -/** - \brief Union type to access the Control Registers (CONTROL). - */ -typedef union -{ - struct - { - uint32_t nPRIV:1; /*!< bit: 0 Execution privilege in Thread mode */ - uint32_t SPSEL:1; /*!< bit: 1 Stack to be used */ - uint32_t FPCA:1; /*!< bit: 2 FP extension active flag */ - uint32_t _reserved0:29; /*!< bit: 3..31 Reserved */ - } b; /*!< Structure used for bit access */ - uint32_t w; /*!< Type used for word access */ -} CONTROL_Type; - -/* CONTROL Register Definitions */ -#define CONTROL_FPCA_Pos 2U /*!< CONTROL: FPCA Position */ -#define CONTROL_FPCA_Msk (1UL << CONTROL_FPCA_Pos) /*!< CONTROL: FPCA Mask */ - -#define CONTROL_SPSEL_Pos 1U /*!< CONTROL: SPSEL Position */ -#define CONTROL_SPSEL_Msk (1UL << CONTROL_SPSEL_Pos) /*!< CONTROL: SPSEL Mask */ - -#define CONTROL_nPRIV_Pos 0U /*!< CONTROL: nPRIV Position */ -#define CONTROL_nPRIV_Msk (1UL /*<< CONTROL_nPRIV_Pos*/) /*!< CONTROL: nPRIV Mask */ - -/*@} end of group CMSIS_CORE */ - - -/** - \ingroup CMSIS_core_register - \defgroup CMSIS_NVIC Nested Vectored Interrupt Controller (NVIC) - \brief Type definitions for the NVIC Registers - @{ - */ - -/** - \brief Structure type to access the Nested Vectored Interrupt Controller (NVIC). - */ -typedef struct -{ - __IOM uint32_t ISER[8U]; /*!< Offset: 0x000 (R/W) Interrupt Set Enable Register */ - uint32_t RESERVED0[24U]; - __IOM uint32_t ICER[8U]; /*!< Offset: 0x080 (R/W) Interrupt Clear Enable Register */ - uint32_t RSERVED1[24U]; - __IOM uint32_t ISPR[8U]; /*!< Offset: 0x100 (R/W) Interrupt Set Pending Register */ - uint32_t RESERVED2[24U]; - __IOM uint32_t ICPR[8U]; /*!< Offset: 0x180 (R/W) Interrupt Clear Pending Register */ - uint32_t RESERVED3[24U]; - __IOM uint32_t IABR[8U]; /*!< Offset: 0x200 (R/W) Interrupt Active bit Register */ - uint32_t RESERVED4[56U]; - __IOM uint8_t IP[240U]; /*!< Offset: 0x300 (R/W) Interrupt Priority Register (8Bit wide) */ - uint32_t RESERVED5[644U]; - __OM uint32_t STIR; /*!< Offset: 0xE00 ( /W) Software Trigger Interrupt Register */ -} NVIC_Type; - -/* Software Triggered Interrupt Register Definitions */ -#define NVIC_STIR_INTID_Pos 0U /*!< STIR: INTLINESNUM Position */ -#define NVIC_STIR_INTID_Msk (0x1FFUL /*<< NVIC_STIR_INTID_Pos*/) /*!< STIR: INTLINESNUM Mask */ - -/*@} end of group CMSIS_NVIC */ - - -/** - \ingroup CMSIS_core_register - \defgroup CMSIS_SCB System Control Block (SCB) - \brief Type definitions for the System Control Block Registers - @{ - */ - -/** - \brief Structure type to access the System Control Block (SCB). - */ -typedef struct -{ - __IM uint32_t CPUID; /*!< Offset: 0x000 (R/ ) CPUID Base Register */ - __IOM uint32_t ICSR; /*!< Offset: 0x004 (R/W) Interrupt Control and State Register */ - __IOM uint32_t VTOR; /*!< Offset: 0x008 (R/W) Vector Table Offset Register */ - __IOM uint32_t AIRCR; /*!< Offset: 0x00C (R/W) Application Interrupt and Reset Control Register */ - __IOM uint32_t SCR; /*!< Offset: 0x010 (R/W) System Control Register */ - __IOM uint32_t CCR; /*!< Offset: 0x014 (R/W) Configuration Control Register */ - __IOM uint8_t SHPR[12U]; /*!< Offset: 0x018 (R/W) System Handlers Priority Registers (4-7, 8-11, 12-15) */ - __IOM uint32_t SHCSR; /*!< Offset: 0x024 (R/W) System Handler Control and State Register */ - __IOM uint32_t CFSR; /*!< Offset: 0x028 (R/W) Configurable Fault Status Register */ - __IOM uint32_t HFSR; /*!< Offset: 0x02C (R/W) HardFault Status Register */ - __IOM uint32_t DFSR; /*!< Offset: 0x030 (R/W) Debug Fault Status Register */ - __IOM uint32_t MMFAR; /*!< Offset: 0x034 (R/W) MemManage Fault Address Register */ - __IOM uint32_t BFAR; /*!< Offset: 0x038 (R/W) BusFault Address Register */ - __IOM uint32_t AFSR; /*!< Offset: 0x03C (R/W) Auxiliary Fault Status Register */ - __IM uint32_t ID_PFR[2U]; /*!< Offset: 0x040 (R/ ) Processor Feature Register */ - __IM uint32_t ID_DFR; /*!< Offset: 0x048 (R/ ) Debug Feature Register */ - __IM uint32_t ID_AFR; /*!< Offset: 0x04C (R/ ) Auxiliary Feature Register */ - __IM uint32_t ID_MFR[4U]; /*!< Offset: 0x050 (R/ ) Memory Model Feature Register */ - __IM uint32_t ID_ISAR[5U]; /*!< Offset: 0x060 (R/ ) Instruction Set Attributes Register */ - uint32_t RESERVED0[1U]; - __IM uint32_t CLIDR; /*!< Offset: 0x078 (R/ ) Cache Level ID register */ - __IM uint32_t CTR; /*!< Offset: 0x07C (R/ ) Cache Type register */ - __IM uint32_t CCSIDR; /*!< Offset: 0x080 (R/ ) Cache Size ID Register */ - __IOM uint32_t CSSELR; /*!< Offset: 0x084 (R/W) Cache Size Selection Register */ - __IOM uint32_t CPACR; /*!< Offset: 0x088 (R/W) Coprocessor Access Control Register */ - uint32_t RESERVED3[93U]; - __OM uint32_t STIR; /*!< Offset: 0x200 ( /W) Software Triggered Interrupt Register */ - uint32_t RESERVED4[15U]; - __IM uint32_t MVFR0; /*!< Offset: 0x240 (R/ ) Media and VFP Feature Register 0 */ - __IM uint32_t MVFR1; /*!< Offset: 0x244 (R/ ) Media and VFP Feature Register 1 */ - __IM uint32_t MVFR2; /*!< Offset: 0x248 (R/ ) Media and VFP Feature Register 2 */ - uint32_t RESERVED5[1U]; - __OM uint32_t ICIALLU; /*!< Offset: 0x250 ( /W) I-Cache Invalidate All to PoU */ - uint32_t RESERVED6[1U]; - __OM uint32_t ICIMVAU; /*!< Offset: 0x258 ( /W) I-Cache Invalidate by MVA to PoU */ - __OM uint32_t DCIMVAC; /*!< Offset: 0x25C ( /W) D-Cache Invalidate by MVA to PoC */ - __OM uint32_t DCISW; /*!< Offset: 0x260 ( /W) D-Cache Invalidate by Set-way */ - __OM uint32_t DCCMVAU; /*!< Offset: 0x264 ( /W) D-Cache Clean by MVA to PoU */ - __OM uint32_t DCCMVAC; /*!< Offset: 0x268 ( /W) D-Cache Clean by MVA to PoC */ - __OM uint32_t DCCSW; /*!< Offset: 0x26C ( /W) D-Cache Clean by Set-way */ - __OM uint32_t DCCIMVAC; /*!< Offset: 0x270 ( /W) D-Cache Clean and Invalidate by MVA to PoC */ - __OM uint32_t DCCISW; /*!< Offset: 0x274 ( /W) D-Cache Clean and Invalidate by Set-way */ - uint32_t RESERVED7[6U]; - __IOM uint32_t ITCMCR; /*!< Offset: 0x290 (R/W) Instruction Tightly-Coupled Memory Control Register */ - __IOM uint32_t DTCMCR; /*!< Offset: 0x294 (R/W) Data Tightly-Coupled Memory Control Registers */ - __IOM uint32_t AHBPCR; /*!< Offset: 0x298 (R/W) AHBP Control Register */ - __IOM uint32_t CACR; /*!< Offset: 0x29C (R/W) L1 Cache Control Register */ - __IOM uint32_t AHBSCR; /*!< Offset: 0x2A0 (R/W) AHB Slave Control Register */ - uint32_t RESERVED8[1U]; - __IOM uint32_t ABFSR; /*!< Offset: 0x2A8 (R/W) Auxiliary Bus Fault Status Register */ -} SCB_Type; - -/* SCB CPUID Register Definitions */ -#define SCB_CPUID_IMPLEMENTER_Pos 24U /*!< SCB CPUID: IMPLEMENTER Position */ -#define SCB_CPUID_IMPLEMENTER_Msk (0xFFUL << SCB_CPUID_IMPLEMENTER_Pos) /*!< SCB CPUID: IMPLEMENTER Mask */ - -#define SCB_CPUID_VARIANT_Pos 20U /*!< SCB CPUID: VARIANT Position */ -#define SCB_CPUID_VARIANT_Msk (0xFUL << SCB_CPUID_VARIANT_Pos) /*!< SCB CPUID: VARIANT Mask */ - -#define SCB_CPUID_ARCHITECTURE_Pos 16U /*!< SCB CPUID: ARCHITECTURE Position */ -#define SCB_CPUID_ARCHITECTURE_Msk (0xFUL << SCB_CPUID_ARCHITECTURE_Pos) /*!< SCB CPUID: ARCHITECTURE Mask */ - -#define SCB_CPUID_PARTNO_Pos 4U /*!< SCB CPUID: PARTNO Position */ -#define SCB_CPUID_PARTNO_Msk (0xFFFUL << SCB_CPUID_PARTNO_Pos) /*!< SCB CPUID: PARTNO Mask */ - -#define SCB_CPUID_REVISION_Pos 0U /*!< SCB CPUID: REVISION Position */ -#define SCB_CPUID_REVISION_Msk (0xFUL /*<< SCB_CPUID_REVISION_Pos*/) /*!< SCB CPUID: REVISION Mask */ - -/* SCB Interrupt Control State Register Definitions */ -#define SCB_ICSR_NMIPENDSET_Pos 31U /*!< SCB ICSR: NMIPENDSET Position */ -#define SCB_ICSR_NMIPENDSET_Msk (1UL << SCB_ICSR_NMIPENDSET_Pos) /*!< SCB ICSR: NMIPENDSET Mask */ - -#define SCB_ICSR_PENDSVSET_Pos 28U /*!< SCB ICSR: PENDSVSET Position */ -#define SCB_ICSR_PENDSVSET_Msk (1UL << SCB_ICSR_PENDSVSET_Pos) /*!< SCB ICSR: PENDSVSET Mask */ - -#define SCB_ICSR_PENDSVCLR_Pos 27U /*!< SCB ICSR: PENDSVCLR Position */ -#define SCB_ICSR_PENDSVCLR_Msk (1UL << SCB_ICSR_PENDSVCLR_Pos) /*!< SCB ICSR: PENDSVCLR Mask */ - -#define SCB_ICSR_PENDSTSET_Pos 26U /*!< SCB ICSR: PENDSTSET Position */ -#define SCB_ICSR_PENDSTSET_Msk (1UL << SCB_ICSR_PENDSTSET_Pos) /*!< SCB ICSR: PENDSTSET Mask */ - -#define SCB_ICSR_PENDSTCLR_Pos 25U /*!< SCB ICSR: PENDSTCLR Position */ -#define SCB_ICSR_PENDSTCLR_Msk (1UL << SCB_ICSR_PENDSTCLR_Pos) /*!< SCB ICSR: PENDSTCLR Mask */ - -#define SCB_ICSR_ISRPREEMPT_Pos 23U /*!< SCB ICSR: ISRPREEMPT Position */ -#define SCB_ICSR_ISRPREEMPT_Msk (1UL << SCB_ICSR_ISRPREEMPT_Pos) /*!< SCB ICSR: ISRPREEMPT Mask */ - -#define SCB_ICSR_ISRPENDING_Pos 22U /*!< SCB ICSR: ISRPENDING Position */ -#define SCB_ICSR_ISRPENDING_Msk (1UL << SCB_ICSR_ISRPENDING_Pos) /*!< SCB ICSR: ISRPENDING Mask */ - -#define SCB_ICSR_VECTPENDING_Pos 12U /*!< SCB ICSR: VECTPENDING Position */ -#define SCB_ICSR_VECTPENDING_Msk (0x1FFUL << SCB_ICSR_VECTPENDING_Pos) /*!< SCB ICSR: VECTPENDING Mask */ - -#define SCB_ICSR_RETTOBASE_Pos 11U /*!< SCB ICSR: RETTOBASE Position */ -#define SCB_ICSR_RETTOBASE_Msk (1UL << SCB_ICSR_RETTOBASE_Pos) /*!< SCB ICSR: RETTOBASE Mask */ - -#define SCB_ICSR_VECTACTIVE_Pos 0U /*!< SCB ICSR: VECTACTIVE Position */ -#define SCB_ICSR_VECTACTIVE_Msk (0x1FFUL /*<< SCB_ICSR_VECTACTIVE_Pos*/) /*!< SCB ICSR: VECTACTIVE Mask */ - -/* SCB Vector Table Offset Register Definitions */ -#define SCB_VTOR_TBLOFF_Pos 7U /*!< SCB VTOR: TBLOFF Position */ -#define SCB_VTOR_TBLOFF_Msk (0x1FFFFFFUL << SCB_VTOR_TBLOFF_Pos) /*!< SCB VTOR: TBLOFF Mask */ - -/* SCB Application Interrupt and Reset Control Register Definitions */ -#define SCB_AIRCR_VECTKEY_Pos 16U /*!< SCB AIRCR: VECTKEY Position */ -#define SCB_AIRCR_VECTKEY_Msk (0xFFFFUL << SCB_AIRCR_VECTKEY_Pos) /*!< SCB AIRCR: VECTKEY Mask */ - -#define SCB_AIRCR_VECTKEYSTAT_Pos 16U /*!< SCB AIRCR: VECTKEYSTAT Position */ -#define SCB_AIRCR_VECTKEYSTAT_Msk (0xFFFFUL << SCB_AIRCR_VECTKEYSTAT_Pos) /*!< SCB AIRCR: VECTKEYSTAT Mask */ - -#define SCB_AIRCR_ENDIANESS_Pos 15U /*!< SCB AIRCR: ENDIANESS Position */ -#define SCB_AIRCR_ENDIANESS_Msk (1UL << SCB_AIRCR_ENDIANESS_Pos) /*!< SCB AIRCR: ENDIANESS Mask */ - -#define SCB_AIRCR_PRIGROUP_Pos 8U /*!< SCB AIRCR: PRIGROUP Position */ -#define SCB_AIRCR_PRIGROUP_Msk (7UL << SCB_AIRCR_PRIGROUP_Pos) /*!< SCB AIRCR: PRIGROUP Mask */ - -#define SCB_AIRCR_SYSRESETREQ_Pos 2U /*!< SCB AIRCR: SYSRESETREQ Position */ -#define SCB_AIRCR_SYSRESETREQ_Msk (1UL << SCB_AIRCR_SYSRESETREQ_Pos) /*!< SCB AIRCR: SYSRESETREQ Mask */ - -#define SCB_AIRCR_VECTCLRACTIVE_Pos 1U /*!< SCB AIRCR: VECTCLRACTIVE Position */ -#define SCB_AIRCR_VECTCLRACTIVE_Msk (1UL << SCB_AIRCR_VECTCLRACTIVE_Pos) /*!< SCB AIRCR: VECTCLRACTIVE Mask */ - -#define SCB_AIRCR_VECTRESET_Pos 0U /*!< SCB AIRCR: VECTRESET Position */ -#define SCB_AIRCR_VECTRESET_Msk (1UL /*<< SCB_AIRCR_VECTRESET_Pos*/) /*!< SCB AIRCR: VECTRESET Mask */ - -/* SCB System Control Register Definitions */ -#define SCB_SCR_SEVONPEND_Pos 4U /*!< SCB SCR: SEVONPEND Position */ -#define SCB_SCR_SEVONPEND_Msk (1UL << SCB_SCR_SEVONPEND_Pos) /*!< SCB SCR: SEVONPEND Mask */ - -#define SCB_SCR_SLEEPDEEP_Pos 2U /*!< SCB SCR: SLEEPDEEP Position */ -#define SCB_SCR_SLEEPDEEP_Msk (1UL << SCB_SCR_SLEEPDEEP_Pos) /*!< SCB SCR: SLEEPDEEP Mask */ - -#define SCB_SCR_SLEEPONEXIT_Pos 1U /*!< SCB SCR: SLEEPONEXIT Position */ -#define SCB_SCR_SLEEPONEXIT_Msk (1UL << SCB_SCR_SLEEPONEXIT_Pos) /*!< SCB SCR: SLEEPONEXIT Mask */ - -/* SCB Configuration Control Register Definitions */ -#define SCB_CCR_BP_Pos 18U /*!< SCB CCR: Branch prediction enable bit Position */ -#define SCB_CCR_BP_Msk (1UL << SCB_CCR_BP_Pos) /*!< SCB CCR: Branch prediction enable bit Mask */ - -#define SCB_CCR_IC_Pos 17U /*!< SCB CCR: Instruction cache enable bit Position */ -#define SCB_CCR_IC_Msk (1UL << SCB_CCR_IC_Pos) /*!< SCB CCR: Instruction cache enable bit Mask */ - -#define SCB_CCR_DC_Pos 16U /*!< SCB CCR: Cache enable bit Position */ -#define SCB_CCR_DC_Msk (1UL << SCB_CCR_DC_Pos) /*!< SCB CCR: Cache enable bit Mask */ - -#define SCB_CCR_STKALIGN_Pos 9U /*!< SCB CCR: STKALIGN Position */ -#define SCB_CCR_STKALIGN_Msk (1UL << SCB_CCR_STKALIGN_Pos) /*!< SCB CCR: STKALIGN Mask */ - -#define SCB_CCR_BFHFNMIGN_Pos 8U /*!< SCB CCR: BFHFNMIGN Position */ -#define SCB_CCR_BFHFNMIGN_Msk (1UL << SCB_CCR_BFHFNMIGN_Pos) /*!< SCB CCR: BFHFNMIGN Mask */ - -#define SCB_CCR_DIV_0_TRP_Pos 4U /*!< SCB CCR: DIV_0_TRP Position */ -#define SCB_CCR_DIV_0_TRP_Msk (1UL << SCB_CCR_DIV_0_TRP_Pos) /*!< SCB CCR: DIV_0_TRP Mask */ - -#define SCB_CCR_UNALIGN_TRP_Pos 3U /*!< SCB CCR: UNALIGN_TRP Position */ -#define SCB_CCR_UNALIGN_TRP_Msk (1UL << SCB_CCR_UNALIGN_TRP_Pos) /*!< SCB CCR: UNALIGN_TRP Mask */ - -#define SCB_CCR_USERSETMPEND_Pos 1U /*!< SCB CCR: USERSETMPEND Position */ -#define SCB_CCR_USERSETMPEND_Msk (1UL << SCB_CCR_USERSETMPEND_Pos) /*!< SCB CCR: USERSETMPEND Mask */ - -#define SCB_CCR_NONBASETHRDENA_Pos 0U /*!< SCB CCR: NONBASETHRDENA Position */ -#define SCB_CCR_NONBASETHRDENA_Msk (1UL /*<< SCB_CCR_NONBASETHRDENA_Pos*/) /*!< SCB CCR: NONBASETHRDENA Mask */ - -/* SCB System Handler Control and State Register Definitions */ -#define SCB_SHCSR_USGFAULTENA_Pos 18U /*!< SCB SHCSR: USGFAULTENA Position */ -#define SCB_SHCSR_USGFAULTENA_Msk (1UL << SCB_SHCSR_USGFAULTENA_Pos) /*!< SCB SHCSR: USGFAULTENA Mask */ - -#define SCB_SHCSR_BUSFAULTENA_Pos 17U /*!< SCB SHCSR: BUSFAULTENA Position */ -#define SCB_SHCSR_BUSFAULTENA_Msk (1UL << SCB_SHCSR_BUSFAULTENA_Pos) /*!< SCB SHCSR: BUSFAULTENA Mask */ - -#define SCB_SHCSR_MEMFAULTENA_Pos 16U /*!< SCB SHCSR: MEMFAULTENA Position */ -#define SCB_SHCSR_MEMFAULTENA_Msk (1UL << SCB_SHCSR_MEMFAULTENA_Pos) /*!< SCB SHCSR: MEMFAULTENA Mask */ - -#define SCB_SHCSR_SVCALLPENDED_Pos 15U /*!< SCB SHCSR: SVCALLPENDED Position */ -#define SCB_SHCSR_SVCALLPENDED_Msk (1UL << SCB_SHCSR_SVCALLPENDED_Pos) /*!< SCB SHCSR: SVCALLPENDED Mask */ - -#define SCB_SHCSR_BUSFAULTPENDED_Pos 14U /*!< SCB SHCSR: BUSFAULTPENDED Position */ -#define SCB_SHCSR_BUSFAULTPENDED_Msk (1UL << SCB_SHCSR_BUSFAULTPENDED_Pos) /*!< SCB SHCSR: BUSFAULTPENDED Mask */ - -#define SCB_SHCSR_MEMFAULTPENDED_Pos 13U /*!< SCB SHCSR: MEMFAULTPENDED Position */ -#define SCB_SHCSR_MEMFAULTPENDED_Msk (1UL << SCB_SHCSR_MEMFAULTPENDED_Pos) /*!< SCB SHCSR: MEMFAULTPENDED Mask */ - -#define SCB_SHCSR_USGFAULTPENDED_Pos 12U /*!< SCB SHCSR: USGFAULTPENDED Position */ -#define SCB_SHCSR_USGFAULTPENDED_Msk (1UL << SCB_SHCSR_USGFAULTPENDED_Pos) /*!< SCB SHCSR: USGFAULTPENDED Mask */ - -#define SCB_SHCSR_SYSTICKACT_Pos 11U /*!< SCB SHCSR: SYSTICKACT Position */ -#define SCB_SHCSR_SYSTICKACT_Msk (1UL << SCB_SHCSR_SYSTICKACT_Pos) /*!< SCB SHCSR: SYSTICKACT Mask */ - -#define SCB_SHCSR_PENDSVACT_Pos 10U /*!< SCB SHCSR: PENDSVACT Position */ -#define SCB_SHCSR_PENDSVACT_Msk (1UL << SCB_SHCSR_PENDSVACT_Pos) /*!< SCB SHCSR: PENDSVACT Mask */ - -#define SCB_SHCSR_MONITORACT_Pos 8U /*!< SCB SHCSR: MONITORACT Position */ -#define SCB_SHCSR_MONITORACT_Msk (1UL << SCB_SHCSR_MONITORACT_Pos) /*!< SCB SHCSR: MONITORACT Mask */ - -#define SCB_SHCSR_SVCALLACT_Pos 7U /*!< SCB SHCSR: SVCALLACT Position */ -#define SCB_SHCSR_SVCALLACT_Msk (1UL << SCB_SHCSR_SVCALLACT_Pos) /*!< SCB SHCSR: SVCALLACT Mask */ - -#define SCB_SHCSR_USGFAULTACT_Pos 3U /*!< SCB SHCSR: USGFAULTACT Position */ -#define SCB_SHCSR_USGFAULTACT_Msk (1UL << SCB_SHCSR_USGFAULTACT_Pos) /*!< SCB SHCSR: USGFAULTACT Mask */ - -#define SCB_SHCSR_BUSFAULTACT_Pos 1U /*!< SCB SHCSR: BUSFAULTACT Position */ -#define SCB_SHCSR_BUSFAULTACT_Msk (1UL << SCB_SHCSR_BUSFAULTACT_Pos) /*!< SCB SHCSR: BUSFAULTACT Mask */ - -#define SCB_SHCSR_MEMFAULTACT_Pos 0U /*!< SCB SHCSR: MEMFAULTACT Position */ -#define SCB_SHCSR_MEMFAULTACT_Msk (1UL /*<< SCB_SHCSR_MEMFAULTACT_Pos*/) /*!< SCB SHCSR: MEMFAULTACT Mask */ - -/* SCB Configurable Fault Status Register Definitions */ -#define SCB_CFSR_USGFAULTSR_Pos 16U /*!< SCB CFSR: Usage Fault Status Register Position */ -#define SCB_CFSR_USGFAULTSR_Msk (0xFFFFUL << SCB_CFSR_USGFAULTSR_Pos) /*!< SCB CFSR: Usage Fault Status Register Mask */ - -#define SCB_CFSR_BUSFAULTSR_Pos 8U /*!< SCB CFSR: Bus Fault Status Register Position */ -#define SCB_CFSR_BUSFAULTSR_Msk (0xFFUL << SCB_CFSR_BUSFAULTSR_Pos) /*!< SCB CFSR: Bus Fault Status Register Mask */ - -#define SCB_CFSR_MEMFAULTSR_Pos 0U /*!< SCB CFSR: Memory Manage Fault Status Register Position */ -#define SCB_CFSR_MEMFAULTSR_Msk (0xFFUL /*<< SCB_CFSR_MEMFAULTSR_Pos*/) /*!< SCB CFSR: Memory Manage Fault Status Register Mask */ - -/* MemManage Fault Status Register (part of SCB Configurable Fault Status Register) */ -#define SCB_CFSR_MMARVALID_Pos (SCB_SHCSR_MEMFAULTACT_Pos + 7U) /*!< SCB CFSR (MMFSR): MMARVALID Position */ -#define SCB_CFSR_MMARVALID_Msk (1UL << SCB_CFSR_MMARVALID_Pos) /*!< SCB CFSR (MMFSR): MMARVALID Mask */ - -#define SCB_CFSR_MLSPERR_Pos (SCB_SHCSR_MEMFAULTACT_Pos + 5U) /*!< SCB CFSR (MMFSR): MLSPERR Position */ -#define SCB_CFSR_MLSPERR_Msk (1UL << SCB_CFSR_MLSPERR_Pos) /*!< SCB CFSR (MMFSR): MLSPERR Mask */ - -#define SCB_CFSR_MSTKERR_Pos (SCB_SHCSR_MEMFAULTACT_Pos + 4U) /*!< SCB CFSR (MMFSR): MSTKERR Position */ -#define SCB_CFSR_MSTKERR_Msk (1UL << SCB_CFSR_MSTKERR_Pos) /*!< SCB CFSR (MMFSR): MSTKERR Mask */ - -#define SCB_CFSR_MUNSTKERR_Pos (SCB_SHCSR_MEMFAULTACT_Pos + 3U) /*!< SCB CFSR (MMFSR): MUNSTKERR Position */ -#define SCB_CFSR_MUNSTKERR_Msk (1UL << SCB_CFSR_MUNSTKERR_Pos) /*!< SCB CFSR (MMFSR): MUNSTKERR Mask */ - -#define SCB_CFSR_DACCVIOL_Pos (SCB_SHCSR_MEMFAULTACT_Pos + 1U) /*!< SCB CFSR (MMFSR): DACCVIOL Position */ -#define SCB_CFSR_DACCVIOL_Msk (1UL << SCB_CFSR_DACCVIOL_Pos) /*!< SCB CFSR (MMFSR): DACCVIOL Mask */ - -#define SCB_CFSR_IACCVIOL_Pos (SCB_SHCSR_MEMFAULTACT_Pos + 0U) /*!< SCB CFSR (MMFSR): IACCVIOL Position */ -#define SCB_CFSR_IACCVIOL_Msk (1UL /*<< SCB_CFSR_IACCVIOL_Pos*/) /*!< SCB CFSR (MMFSR): IACCVIOL Mask */ - -/* BusFault Status Register (part of SCB Configurable Fault Status Register) */ -#define SCB_CFSR_BFARVALID_Pos (SCB_CFSR_BUSFAULTSR_Pos + 7U) /*!< SCB CFSR (BFSR): BFARVALID Position */ -#define SCB_CFSR_BFARVALID_Msk (1UL << SCB_CFSR_BFARVALID_Pos) /*!< SCB CFSR (BFSR): BFARVALID Mask */ - -#define SCB_CFSR_LSPERR_Pos (SCB_CFSR_BUSFAULTSR_Pos + 5U) /*!< SCB CFSR (BFSR): LSPERR Position */ -#define SCB_CFSR_LSPERR_Msk (1UL << SCB_CFSR_LSPERR_Pos) /*!< SCB CFSR (BFSR): LSPERR Mask */ - -#define SCB_CFSR_STKERR_Pos (SCB_CFSR_BUSFAULTSR_Pos + 4U) /*!< SCB CFSR (BFSR): STKERR Position */ -#define SCB_CFSR_STKERR_Msk (1UL << SCB_CFSR_STKERR_Pos) /*!< SCB CFSR (BFSR): STKERR Mask */ - -#define SCB_CFSR_UNSTKERR_Pos (SCB_CFSR_BUSFAULTSR_Pos + 3U) /*!< SCB CFSR (BFSR): UNSTKERR Position */ -#define SCB_CFSR_UNSTKERR_Msk (1UL << SCB_CFSR_UNSTKERR_Pos) /*!< SCB CFSR (BFSR): UNSTKERR Mask */ - -#define SCB_CFSR_IMPRECISERR_Pos (SCB_CFSR_BUSFAULTSR_Pos + 2U) /*!< SCB CFSR (BFSR): IMPRECISERR Position */ -#define SCB_CFSR_IMPRECISERR_Msk (1UL << SCB_CFSR_IMPRECISERR_Pos) /*!< SCB CFSR (BFSR): IMPRECISERR Mask */ - -#define SCB_CFSR_PRECISERR_Pos (SCB_CFSR_BUSFAULTSR_Pos + 1U) /*!< SCB CFSR (BFSR): PRECISERR Position */ -#define SCB_CFSR_PRECISERR_Msk (1UL << SCB_CFSR_PRECISERR_Pos) /*!< SCB CFSR (BFSR): PRECISERR Mask */ - -#define SCB_CFSR_IBUSERR_Pos (SCB_CFSR_BUSFAULTSR_Pos + 0U) /*!< SCB CFSR (BFSR): IBUSERR Position */ -#define SCB_CFSR_IBUSERR_Msk (1UL << SCB_CFSR_IBUSERR_Pos) /*!< SCB CFSR (BFSR): IBUSERR Mask */ - -/* UsageFault Status Register (part of SCB Configurable Fault Status Register) */ -#define SCB_CFSR_DIVBYZERO_Pos (SCB_CFSR_USGFAULTSR_Pos + 9U) /*!< SCB CFSR (UFSR): DIVBYZERO Position */ -#define SCB_CFSR_DIVBYZERO_Msk (1UL << SCB_CFSR_DIVBYZERO_Pos) /*!< SCB CFSR (UFSR): DIVBYZERO Mask */ - -#define SCB_CFSR_UNALIGNED_Pos (SCB_CFSR_USGFAULTSR_Pos + 8U) /*!< SCB CFSR (UFSR): UNALIGNED Position */ -#define SCB_CFSR_UNALIGNED_Msk (1UL << SCB_CFSR_UNALIGNED_Pos) /*!< SCB CFSR (UFSR): UNALIGNED Mask */ - -#define SCB_CFSR_NOCP_Pos (SCB_CFSR_USGFAULTSR_Pos + 3U) /*!< SCB CFSR (UFSR): NOCP Position */ -#define SCB_CFSR_NOCP_Msk (1UL << SCB_CFSR_NOCP_Pos) /*!< SCB CFSR (UFSR): NOCP Mask */ - -#define SCB_CFSR_INVPC_Pos (SCB_CFSR_USGFAULTSR_Pos + 2U) /*!< SCB CFSR (UFSR): INVPC Position */ -#define SCB_CFSR_INVPC_Msk (1UL << SCB_CFSR_INVPC_Pos) /*!< SCB CFSR (UFSR): INVPC Mask */ - -#define SCB_CFSR_INVSTATE_Pos (SCB_CFSR_USGFAULTSR_Pos + 1U) /*!< SCB CFSR (UFSR): INVSTATE Position */ -#define SCB_CFSR_INVSTATE_Msk (1UL << SCB_CFSR_INVSTATE_Pos) /*!< SCB CFSR (UFSR): INVSTATE Mask */ - -#define SCB_CFSR_UNDEFINSTR_Pos (SCB_CFSR_USGFAULTSR_Pos + 0U) /*!< SCB CFSR (UFSR): UNDEFINSTR Position */ -#define SCB_CFSR_UNDEFINSTR_Msk (1UL << SCB_CFSR_UNDEFINSTR_Pos) /*!< SCB CFSR (UFSR): UNDEFINSTR Mask */ - -/* SCB Hard Fault Status Register Definitions */ -#define SCB_HFSR_DEBUGEVT_Pos 31U /*!< SCB HFSR: DEBUGEVT Position */ -#define SCB_HFSR_DEBUGEVT_Msk (1UL << SCB_HFSR_DEBUGEVT_Pos) /*!< SCB HFSR: DEBUGEVT Mask */ - -#define SCB_HFSR_FORCED_Pos 30U /*!< SCB HFSR: FORCED Position */ -#define SCB_HFSR_FORCED_Msk (1UL << SCB_HFSR_FORCED_Pos) /*!< SCB HFSR: FORCED Mask */ - -#define SCB_HFSR_VECTTBL_Pos 1U /*!< SCB HFSR: VECTTBL Position */ -#define SCB_HFSR_VECTTBL_Msk (1UL << SCB_HFSR_VECTTBL_Pos) /*!< SCB HFSR: VECTTBL Mask */ - -/* SCB Debug Fault Status Register Definitions */ -#define SCB_DFSR_EXTERNAL_Pos 4U /*!< SCB DFSR: EXTERNAL Position */ -#define SCB_DFSR_EXTERNAL_Msk (1UL << SCB_DFSR_EXTERNAL_Pos) /*!< SCB DFSR: EXTERNAL Mask */ - -#define SCB_DFSR_VCATCH_Pos 3U /*!< SCB DFSR: VCATCH Position */ -#define SCB_DFSR_VCATCH_Msk (1UL << SCB_DFSR_VCATCH_Pos) /*!< SCB DFSR: VCATCH Mask */ - -#define SCB_DFSR_DWTTRAP_Pos 2U /*!< SCB DFSR: DWTTRAP Position */ -#define SCB_DFSR_DWTTRAP_Msk (1UL << SCB_DFSR_DWTTRAP_Pos) /*!< SCB DFSR: DWTTRAP Mask */ - -#define SCB_DFSR_BKPT_Pos 1U /*!< SCB DFSR: BKPT Position */ -#define SCB_DFSR_BKPT_Msk (1UL << SCB_DFSR_BKPT_Pos) /*!< SCB DFSR: BKPT Mask */ - -#define SCB_DFSR_HALTED_Pos 0U /*!< SCB DFSR: HALTED Position */ -#define SCB_DFSR_HALTED_Msk (1UL /*<< SCB_DFSR_HALTED_Pos*/) /*!< SCB DFSR: HALTED Mask */ - -/* SCB Cache Level ID Register Definitions */ -#define SCB_CLIDR_LOUU_Pos 27U /*!< SCB CLIDR: LoUU Position */ -#define SCB_CLIDR_LOUU_Msk (7UL << SCB_CLIDR_LOUU_Pos) /*!< SCB CLIDR: LoUU Mask */ - -#define SCB_CLIDR_LOC_Pos 24U /*!< SCB CLIDR: LoC Position */ -#define SCB_CLIDR_LOC_Msk (7UL << SCB_CLIDR_LOC_Pos) /*!< SCB CLIDR: LoC Mask */ - -/* SCB Cache Type Register Definitions */ -#define SCB_CTR_FORMAT_Pos 29U /*!< SCB CTR: Format Position */ -#define SCB_CTR_FORMAT_Msk (7UL << SCB_CTR_FORMAT_Pos) /*!< SCB CTR: Format Mask */ - -#define SCB_CTR_CWG_Pos 24U /*!< SCB CTR: CWG Position */ -#define SCB_CTR_CWG_Msk (0xFUL << SCB_CTR_CWG_Pos) /*!< SCB CTR: CWG Mask */ - -#define SCB_CTR_ERG_Pos 20U /*!< SCB CTR: ERG Position */ -#define SCB_CTR_ERG_Msk (0xFUL << SCB_CTR_ERG_Pos) /*!< SCB CTR: ERG Mask */ - -#define SCB_CTR_DMINLINE_Pos 16U /*!< SCB CTR: DminLine Position */ -#define SCB_CTR_DMINLINE_Msk (0xFUL << SCB_CTR_DMINLINE_Pos) /*!< SCB CTR: DminLine Mask */ - -#define SCB_CTR_IMINLINE_Pos 0U /*!< SCB CTR: ImInLine Position */ -#define SCB_CTR_IMINLINE_Msk (0xFUL /*<< SCB_CTR_IMINLINE_Pos*/) /*!< SCB CTR: ImInLine Mask */ - -/* SCB Cache Size ID Register Definitions */ -#define SCB_CCSIDR_WT_Pos 31U /*!< SCB CCSIDR: WT Position */ -#define SCB_CCSIDR_WT_Msk (1UL << SCB_CCSIDR_WT_Pos) /*!< SCB CCSIDR: WT Mask */ - -#define SCB_CCSIDR_WB_Pos 30U /*!< SCB CCSIDR: WB Position */ -#define SCB_CCSIDR_WB_Msk (1UL << SCB_CCSIDR_WB_Pos) /*!< SCB CCSIDR: WB Mask */ - -#define SCB_CCSIDR_RA_Pos 29U /*!< SCB CCSIDR: RA Position */ -#define SCB_CCSIDR_RA_Msk (1UL << SCB_CCSIDR_RA_Pos) /*!< SCB CCSIDR: RA Mask */ - -#define SCB_CCSIDR_WA_Pos 28U /*!< SCB CCSIDR: WA Position */ -#define SCB_CCSIDR_WA_Msk (1UL << SCB_CCSIDR_WA_Pos) /*!< SCB CCSIDR: WA Mask */ - -#define SCB_CCSIDR_NUMSETS_Pos 13U /*!< SCB CCSIDR: NumSets Position */ -#define SCB_CCSIDR_NUMSETS_Msk (0x7FFFUL << SCB_CCSIDR_NUMSETS_Pos) /*!< SCB CCSIDR: NumSets Mask */ - -#define SCB_CCSIDR_ASSOCIATIVITY_Pos 3U /*!< SCB CCSIDR: Associativity Position */ -#define SCB_CCSIDR_ASSOCIATIVITY_Msk (0x3FFUL << SCB_CCSIDR_ASSOCIATIVITY_Pos) /*!< SCB CCSIDR: Associativity Mask */ - -#define SCB_CCSIDR_LINESIZE_Pos 0U /*!< SCB CCSIDR: LineSize Position */ -#define SCB_CCSIDR_LINESIZE_Msk (7UL /*<< SCB_CCSIDR_LINESIZE_Pos*/) /*!< SCB CCSIDR: LineSize Mask */ - -/* SCB Cache Size Selection Register Definitions */ -#define SCB_CSSELR_LEVEL_Pos 1U /*!< SCB CSSELR: Level Position */ -#define SCB_CSSELR_LEVEL_Msk (7UL << SCB_CSSELR_LEVEL_Pos) /*!< SCB CSSELR: Level Mask */ - -#define SCB_CSSELR_IND_Pos 0U /*!< SCB CSSELR: InD Position */ -#define SCB_CSSELR_IND_Msk (1UL /*<< SCB_CSSELR_IND_Pos*/) /*!< SCB CSSELR: InD Mask */ - -/* SCB Software Triggered Interrupt Register Definitions */ -#define SCB_STIR_INTID_Pos 0U /*!< SCB STIR: INTID Position */ -#define SCB_STIR_INTID_Msk (0x1FFUL /*<< SCB_STIR_INTID_Pos*/) /*!< SCB STIR: INTID Mask */ - -/* SCB D-Cache Invalidate by Set-way Register Definitions */ -#define SCB_DCISW_WAY_Pos 30U /*!< SCB DCISW: Way Position */ -#define SCB_DCISW_WAY_Msk (3UL << SCB_DCISW_WAY_Pos) /*!< SCB DCISW: Way Mask */ - -#define SCB_DCISW_SET_Pos 5U /*!< SCB DCISW: Set Position */ -#define SCB_DCISW_SET_Msk (0x1FFUL << SCB_DCISW_SET_Pos) /*!< SCB DCISW: Set Mask */ - -/* SCB D-Cache Clean by Set-way Register Definitions */ -#define SCB_DCCSW_WAY_Pos 30U /*!< SCB DCCSW: Way Position */ -#define SCB_DCCSW_WAY_Msk (3UL << SCB_DCCSW_WAY_Pos) /*!< SCB DCCSW: Way Mask */ - -#define SCB_DCCSW_SET_Pos 5U /*!< SCB DCCSW: Set Position */ -#define SCB_DCCSW_SET_Msk (0x1FFUL << SCB_DCCSW_SET_Pos) /*!< SCB DCCSW: Set Mask */ - -/* SCB D-Cache Clean and Invalidate by Set-way Register Definitions */ -#define SCB_DCCISW_WAY_Pos 30U /*!< SCB DCCISW: Way Position */ -#define SCB_DCCISW_WAY_Msk (3UL << SCB_DCCISW_WAY_Pos) /*!< SCB DCCISW: Way Mask */ - -#define SCB_DCCISW_SET_Pos 5U /*!< SCB DCCISW: Set Position */ -#define SCB_DCCISW_SET_Msk (0x1FFUL << SCB_DCCISW_SET_Pos) /*!< SCB DCCISW: Set Mask */ - -/* Instruction Tightly-Coupled Memory Control Register Definitions */ -#define SCB_ITCMCR_SZ_Pos 3U /*!< SCB ITCMCR: SZ Position */ -#define SCB_ITCMCR_SZ_Msk (0xFUL << SCB_ITCMCR_SZ_Pos) /*!< SCB ITCMCR: SZ Mask */ - -#define SCB_ITCMCR_RETEN_Pos 2U /*!< SCB ITCMCR: RETEN Position */ -#define SCB_ITCMCR_RETEN_Msk (1UL << SCB_ITCMCR_RETEN_Pos) /*!< SCB ITCMCR: RETEN Mask */ - -#define SCB_ITCMCR_RMW_Pos 1U /*!< SCB ITCMCR: RMW Position */ -#define SCB_ITCMCR_RMW_Msk (1UL << SCB_ITCMCR_RMW_Pos) /*!< SCB ITCMCR: RMW Mask */ - -#define SCB_ITCMCR_EN_Pos 0U /*!< SCB ITCMCR: EN Position */ -#define SCB_ITCMCR_EN_Msk (1UL /*<< SCB_ITCMCR_EN_Pos*/) /*!< SCB ITCMCR: EN Mask */ - -/* Data Tightly-Coupled Memory Control Register Definitions */ -#define SCB_DTCMCR_SZ_Pos 3U /*!< SCB DTCMCR: SZ Position */ -#define SCB_DTCMCR_SZ_Msk (0xFUL << SCB_DTCMCR_SZ_Pos) /*!< SCB DTCMCR: SZ Mask */ - -#define SCB_DTCMCR_RETEN_Pos 2U /*!< SCB DTCMCR: RETEN Position */ -#define SCB_DTCMCR_RETEN_Msk (1UL << SCB_DTCMCR_RETEN_Pos) /*!< SCB DTCMCR: RETEN Mask */ - -#define SCB_DTCMCR_RMW_Pos 1U /*!< SCB DTCMCR: RMW Position */ -#define SCB_DTCMCR_RMW_Msk (1UL << SCB_DTCMCR_RMW_Pos) /*!< SCB DTCMCR: RMW Mask */ - -#define SCB_DTCMCR_EN_Pos 0U /*!< SCB DTCMCR: EN Position */ -#define SCB_DTCMCR_EN_Msk (1UL /*<< SCB_DTCMCR_EN_Pos*/) /*!< SCB DTCMCR: EN Mask */ - -/* AHBP Control Register Definitions */ -#define SCB_AHBPCR_SZ_Pos 1U /*!< SCB AHBPCR: SZ Position */ -#define SCB_AHBPCR_SZ_Msk (7UL << SCB_AHBPCR_SZ_Pos) /*!< SCB AHBPCR: SZ Mask */ - -#define SCB_AHBPCR_EN_Pos 0U /*!< SCB AHBPCR: EN Position */ -#define SCB_AHBPCR_EN_Msk (1UL /*<< SCB_AHBPCR_EN_Pos*/) /*!< SCB AHBPCR: EN Mask */ - -/* L1 Cache Control Register Definitions */ -#define SCB_CACR_FORCEWT_Pos 2U /*!< SCB CACR: FORCEWT Position */ -#define SCB_CACR_FORCEWT_Msk (1UL << SCB_CACR_FORCEWT_Pos) /*!< SCB CACR: FORCEWT Mask */ - -#define SCB_CACR_ECCEN_Pos 1U /*!< SCB CACR: ECCEN Position */ -#define SCB_CACR_ECCEN_Msk (1UL << SCB_CACR_ECCEN_Pos) /*!< SCB CACR: ECCEN Mask */ - -#define SCB_CACR_SIWT_Pos 0U /*!< SCB CACR: SIWT Position */ -#define SCB_CACR_SIWT_Msk (1UL /*<< SCB_CACR_SIWT_Pos*/) /*!< SCB CACR: SIWT Mask */ - -/* AHBS Control Register Definitions */ -#define SCB_AHBSCR_INITCOUNT_Pos 11U /*!< SCB AHBSCR: INITCOUNT Position */ -#define SCB_AHBSCR_INITCOUNT_Msk (0x1FUL << SCB_AHBPCR_INITCOUNT_Pos) /*!< SCB AHBSCR: INITCOUNT Mask */ - -#define SCB_AHBSCR_TPRI_Pos 2U /*!< SCB AHBSCR: TPRI Position */ -#define SCB_AHBSCR_TPRI_Msk (0x1FFUL << SCB_AHBPCR_TPRI_Pos) /*!< SCB AHBSCR: TPRI Mask */ - -#define SCB_AHBSCR_CTL_Pos 0U /*!< SCB AHBSCR: CTL Position*/ -#define SCB_AHBSCR_CTL_Msk (3UL /*<< SCB_AHBPCR_CTL_Pos*/) /*!< SCB AHBSCR: CTL Mask */ - -/* Auxiliary Bus Fault Status Register Definitions */ -#define SCB_ABFSR_AXIMTYPE_Pos 8U /*!< SCB ABFSR: AXIMTYPE Position*/ -#define SCB_ABFSR_AXIMTYPE_Msk (3UL << SCB_ABFSR_AXIMTYPE_Pos) /*!< SCB ABFSR: AXIMTYPE Mask */ - -#define SCB_ABFSR_EPPB_Pos 4U /*!< SCB ABFSR: EPPB Position*/ -#define SCB_ABFSR_EPPB_Msk (1UL << SCB_ABFSR_EPPB_Pos) /*!< SCB ABFSR: EPPB Mask */ - -#define SCB_ABFSR_AXIM_Pos 3U /*!< SCB ABFSR: AXIM Position*/ -#define SCB_ABFSR_AXIM_Msk (1UL << SCB_ABFSR_AXIM_Pos) /*!< SCB ABFSR: AXIM Mask */ - -#define SCB_ABFSR_AHBP_Pos 2U /*!< SCB ABFSR: AHBP Position*/ -#define SCB_ABFSR_AHBP_Msk (1UL << SCB_ABFSR_AHBP_Pos) /*!< SCB ABFSR: AHBP Mask */ - -#define SCB_ABFSR_DTCM_Pos 1U /*!< SCB ABFSR: DTCM Position*/ -#define SCB_ABFSR_DTCM_Msk (1UL << SCB_ABFSR_DTCM_Pos) /*!< SCB ABFSR: DTCM Mask */ - -#define SCB_ABFSR_ITCM_Pos 0U /*!< SCB ABFSR: ITCM Position*/ -#define SCB_ABFSR_ITCM_Msk (1UL /*<< SCB_ABFSR_ITCM_Pos*/) /*!< SCB ABFSR: ITCM Mask */ - -/*@} end of group CMSIS_SCB */ - - -/** - \ingroup CMSIS_core_register - \defgroup CMSIS_SCnSCB System Controls not in SCB (SCnSCB) - \brief Type definitions for the System Control and ID Register not in the SCB - @{ - */ - -/** - \brief Structure type to access the System Control and ID Register not in the SCB. - */ -typedef struct -{ - uint32_t RESERVED0[1U]; - __IM uint32_t ICTR; /*!< Offset: 0x004 (R/ ) Interrupt Controller Type Register */ - __IOM uint32_t ACTLR; /*!< Offset: 0x008 (R/W) Auxiliary Control Register */ -} SCnSCB_Type; - -/* Interrupt Controller Type Register Definitions */ -#define SCnSCB_ICTR_INTLINESNUM_Pos 0U /*!< ICTR: INTLINESNUM Position */ -#define SCnSCB_ICTR_INTLINESNUM_Msk (0xFUL /*<< SCnSCB_ICTR_INTLINESNUM_Pos*/) /*!< ICTR: INTLINESNUM Mask */ - -/* Auxiliary Control Register Definitions */ -#define SCnSCB_ACTLR_DISITMATBFLUSH_Pos 12U /*!< ACTLR: DISITMATBFLUSH Position */ -#define SCnSCB_ACTLR_DISITMATBFLUSH_Msk (1UL << SCnSCB_ACTLR_DISITMATBFLUSH_Pos) /*!< ACTLR: DISITMATBFLUSH Mask */ - -#define SCnSCB_ACTLR_DISRAMODE_Pos 11U /*!< ACTLR: DISRAMODE Position */ -#define SCnSCB_ACTLR_DISRAMODE_Msk (1UL << SCnSCB_ACTLR_DISRAMODE_Pos) /*!< ACTLR: DISRAMODE Mask */ - -#define SCnSCB_ACTLR_FPEXCODIS_Pos 10U /*!< ACTLR: FPEXCODIS Position */ -#define SCnSCB_ACTLR_FPEXCODIS_Msk (1UL << SCnSCB_ACTLR_FPEXCODIS_Pos) /*!< ACTLR: FPEXCODIS Mask */ - -#define SCnSCB_ACTLR_DISFOLD_Pos 2U /*!< ACTLR: DISFOLD Position */ -#define SCnSCB_ACTLR_DISFOLD_Msk (1UL << SCnSCB_ACTLR_DISFOLD_Pos) /*!< ACTLR: DISFOLD Mask */ - -#define SCnSCB_ACTLR_DISMCYCINT_Pos 0U /*!< ACTLR: DISMCYCINT Position */ -#define SCnSCB_ACTLR_DISMCYCINT_Msk (1UL /*<< SCnSCB_ACTLR_DISMCYCINT_Pos*/) /*!< ACTLR: DISMCYCINT Mask */ - -/*@} end of group CMSIS_SCnotSCB */ - - -/** - \ingroup CMSIS_core_register - \defgroup CMSIS_SysTick System Tick Timer (SysTick) - \brief Type definitions for the System Timer Registers. - @{ - */ - -/** - \brief Structure type to access the System Timer (SysTick). - */ -typedef struct -{ - __IOM uint32_t CTRL; /*!< Offset: 0x000 (R/W) SysTick Control and Status Register */ - __IOM uint32_t LOAD; /*!< Offset: 0x004 (R/W) SysTick Reload Value Register */ - __IOM uint32_t VAL; /*!< Offset: 0x008 (R/W) SysTick Current Value Register */ - __IM uint32_t CALIB; /*!< Offset: 0x00C (R/ ) SysTick Calibration Register */ -} SysTick_Type; - -/* SysTick Control / Status Register Definitions */ -#define SysTick_CTRL_COUNTFLAG_Pos 16U /*!< SysTick CTRL: COUNTFLAG Position */ -#define SysTick_CTRL_COUNTFLAG_Msk (1UL << SysTick_CTRL_COUNTFLAG_Pos) /*!< SysTick CTRL: COUNTFLAG Mask */ - -#define SysTick_CTRL_CLKSOURCE_Pos 2U /*!< SysTick CTRL: CLKSOURCE Position */ -#define SysTick_CTRL_CLKSOURCE_Msk (1UL << SysTick_CTRL_CLKSOURCE_Pos) /*!< SysTick CTRL: CLKSOURCE Mask */ - -#define SysTick_CTRL_TICKINT_Pos 1U /*!< SysTick CTRL: TICKINT Position */ -#define SysTick_CTRL_TICKINT_Msk (1UL << SysTick_CTRL_TICKINT_Pos) /*!< SysTick CTRL: TICKINT Mask */ - -#define SysTick_CTRL_ENABLE_Pos 0U /*!< SysTick CTRL: ENABLE Position */ -#define SysTick_CTRL_ENABLE_Msk (1UL /*<< SysTick_CTRL_ENABLE_Pos*/) /*!< SysTick CTRL: ENABLE Mask */ - -/* SysTick Reload Register Definitions */ -#define SysTick_LOAD_RELOAD_Pos 0U /*!< SysTick LOAD: RELOAD Position */ -#define SysTick_LOAD_RELOAD_Msk (0xFFFFFFUL /*<< SysTick_LOAD_RELOAD_Pos*/) /*!< SysTick LOAD: RELOAD Mask */ - -/* SysTick Current Register Definitions */ -#define SysTick_VAL_CURRENT_Pos 0U /*!< SysTick VAL: CURRENT Position */ -#define SysTick_VAL_CURRENT_Msk (0xFFFFFFUL /*<< SysTick_VAL_CURRENT_Pos*/) /*!< SysTick VAL: CURRENT Mask */ - -/* SysTick Calibration Register Definitions */ -#define SysTick_CALIB_NOREF_Pos 31U /*!< SysTick CALIB: NOREF Position */ -#define SysTick_CALIB_NOREF_Msk (1UL << SysTick_CALIB_NOREF_Pos) /*!< SysTick CALIB: NOREF Mask */ - -#define SysTick_CALIB_SKEW_Pos 30U /*!< SysTick CALIB: SKEW Position */ -#define SysTick_CALIB_SKEW_Msk (1UL << SysTick_CALIB_SKEW_Pos) /*!< SysTick CALIB: SKEW Mask */ - -#define SysTick_CALIB_TENMS_Pos 0U /*!< SysTick CALIB: TENMS Position */ -#define SysTick_CALIB_TENMS_Msk (0xFFFFFFUL /*<< SysTick_CALIB_TENMS_Pos*/) /*!< SysTick CALIB: TENMS Mask */ - -/*@} end of group CMSIS_SysTick */ - - -/** - \ingroup CMSIS_core_register - \defgroup CMSIS_ITM Instrumentation Trace Macrocell (ITM) - \brief Type definitions for the Instrumentation Trace Macrocell (ITM) - @{ - */ - -/** - \brief Structure type to access the Instrumentation Trace Macrocell Register (ITM). - */ -typedef struct -{ - __OM union - { - __OM uint8_t u8; /*!< Offset: 0x000 ( /W) ITM Stimulus Port 8-bit */ - __OM uint16_t u16; /*!< Offset: 0x000 ( /W) ITM Stimulus Port 16-bit */ - __OM uint32_t u32; /*!< Offset: 0x000 ( /W) ITM Stimulus Port 32-bit */ - } PORT [32U]; /*!< Offset: 0x000 ( /W) ITM Stimulus Port Registers */ - uint32_t RESERVED0[864U]; - __IOM uint32_t TER; /*!< Offset: 0xE00 (R/W) ITM Trace Enable Register */ - uint32_t RESERVED1[15U]; - __IOM uint32_t TPR; /*!< Offset: 0xE40 (R/W) ITM Trace Privilege Register */ - uint32_t RESERVED2[15U]; - __IOM uint32_t TCR; /*!< Offset: 0xE80 (R/W) ITM Trace Control Register */ - uint32_t RESERVED3[29U]; - __OM uint32_t IWR; /*!< Offset: 0xEF8 ( /W) ITM Integration Write Register */ - __IM uint32_t IRR; /*!< Offset: 0xEFC (R/ ) ITM Integration Read Register */ - __IOM uint32_t IMCR; /*!< Offset: 0xF00 (R/W) ITM Integration Mode Control Register */ - uint32_t RESERVED4[43U]; - __OM uint32_t LAR; /*!< Offset: 0xFB0 ( /W) ITM Lock Access Register */ - __IM uint32_t LSR; /*!< Offset: 0xFB4 (R/ ) ITM Lock Status Register */ - uint32_t RESERVED5[6U]; - __IM uint32_t PID4; /*!< Offset: 0xFD0 (R/ ) ITM Peripheral Identification Register #4 */ - __IM uint32_t PID5; /*!< Offset: 0xFD4 (R/ ) ITM Peripheral Identification Register #5 */ - __IM uint32_t PID6; /*!< Offset: 0xFD8 (R/ ) ITM Peripheral Identification Register #6 */ - __IM uint32_t PID7; /*!< Offset: 0xFDC (R/ ) ITM Peripheral Identification Register #7 */ - __IM uint32_t PID0; /*!< Offset: 0xFE0 (R/ ) ITM Peripheral Identification Register #0 */ - __IM uint32_t PID1; /*!< Offset: 0xFE4 (R/ ) ITM Peripheral Identification Register #1 */ - __IM uint32_t PID2; /*!< Offset: 0xFE8 (R/ ) ITM Peripheral Identification Register #2 */ - __IM uint32_t PID3; /*!< Offset: 0xFEC (R/ ) ITM Peripheral Identification Register #3 */ - __IM uint32_t CID0; /*!< Offset: 0xFF0 (R/ ) ITM Component Identification Register #0 */ - __IM uint32_t CID1; /*!< Offset: 0xFF4 (R/ ) ITM Component Identification Register #1 */ - __IM uint32_t CID2; /*!< Offset: 0xFF8 (R/ ) ITM Component Identification Register #2 */ - __IM uint32_t CID3; /*!< Offset: 0xFFC (R/ ) ITM Component Identification Register #3 */ -} ITM_Type; - -/* ITM Trace Privilege Register Definitions */ -#define ITM_TPR_PRIVMASK_Pos 0U /*!< ITM TPR: PRIVMASK Position */ -#define ITM_TPR_PRIVMASK_Msk (0xFFFFFFFFUL /*<< ITM_TPR_PRIVMASK_Pos*/) /*!< ITM TPR: PRIVMASK Mask */ - -/* ITM Trace Control Register Definitions */ -#define ITM_TCR_BUSY_Pos 23U /*!< ITM TCR: BUSY Position */ -#define ITM_TCR_BUSY_Msk (1UL << ITM_TCR_BUSY_Pos) /*!< ITM TCR: BUSY Mask */ - -#define ITM_TCR_TraceBusID_Pos 16U /*!< ITM TCR: ATBID Position */ -#define ITM_TCR_TraceBusID_Msk (0x7FUL << ITM_TCR_TraceBusID_Pos) /*!< ITM TCR: ATBID Mask */ - -#define ITM_TCR_GTSFREQ_Pos 10U /*!< ITM TCR: Global timestamp frequency Position */ -#define ITM_TCR_GTSFREQ_Msk (3UL << ITM_TCR_GTSFREQ_Pos) /*!< ITM TCR: Global timestamp frequency Mask */ - -#define ITM_TCR_TSPrescale_Pos 8U /*!< ITM TCR: TSPrescale Position */ -#define ITM_TCR_TSPrescale_Msk (3UL << ITM_TCR_TSPrescale_Pos) /*!< ITM TCR: TSPrescale Mask */ - -#define ITM_TCR_SWOENA_Pos 4U /*!< ITM TCR: SWOENA Position */ -#define ITM_TCR_SWOENA_Msk (1UL << ITM_TCR_SWOENA_Pos) /*!< ITM TCR: SWOENA Mask */ - -#define ITM_TCR_DWTENA_Pos 3U /*!< ITM TCR: DWTENA Position */ -#define ITM_TCR_DWTENA_Msk (1UL << ITM_TCR_DWTENA_Pos) /*!< ITM TCR: DWTENA Mask */ - -#define ITM_TCR_SYNCENA_Pos 2U /*!< ITM TCR: SYNCENA Position */ -#define ITM_TCR_SYNCENA_Msk (1UL << ITM_TCR_SYNCENA_Pos) /*!< ITM TCR: SYNCENA Mask */ - -#define ITM_TCR_TSENA_Pos 1U /*!< ITM TCR: TSENA Position */ -#define ITM_TCR_TSENA_Msk (1UL << ITM_TCR_TSENA_Pos) /*!< ITM TCR: TSENA Mask */ - -#define ITM_TCR_ITMENA_Pos 0U /*!< ITM TCR: ITM Enable bit Position */ -#define ITM_TCR_ITMENA_Msk (1UL /*<< ITM_TCR_ITMENA_Pos*/) /*!< ITM TCR: ITM Enable bit Mask */ - -/* ITM Integration Write Register Definitions */ -#define ITM_IWR_ATVALIDM_Pos 0U /*!< ITM IWR: ATVALIDM Position */ -#define ITM_IWR_ATVALIDM_Msk (1UL /*<< ITM_IWR_ATVALIDM_Pos*/) /*!< ITM IWR: ATVALIDM Mask */ - -/* ITM Integration Read Register Definitions */ -#define ITM_IRR_ATREADYM_Pos 0U /*!< ITM IRR: ATREADYM Position */ -#define ITM_IRR_ATREADYM_Msk (1UL /*<< ITM_IRR_ATREADYM_Pos*/) /*!< ITM IRR: ATREADYM Mask */ - -/* ITM Integration Mode Control Register Definitions */ -#define ITM_IMCR_INTEGRATION_Pos 0U /*!< ITM IMCR: INTEGRATION Position */ -#define ITM_IMCR_INTEGRATION_Msk (1UL /*<< ITM_IMCR_INTEGRATION_Pos*/) /*!< ITM IMCR: INTEGRATION Mask */ - -/* ITM Lock Status Register Definitions */ -#define ITM_LSR_ByteAcc_Pos 2U /*!< ITM LSR: ByteAcc Position */ -#define ITM_LSR_ByteAcc_Msk (1UL << ITM_LSR_ByteAcc_Pos) /*!< ITM LSR: ByteAcc Mask */ - -#define ITM_LSR_Access_Pos 1U /*!< ITM LSR: Access Position */ -#define ITM_LSR_Access_Msk (1UL << ITM_LSR_Access_Pos) /*!< ITM LSR: Access Mask */ - -#define ITM_LSR_Present_Pos 0U /*!< ITM LSR: Present Position */ -#define ITM_LSR_Present_Msk (1UL /*<< ITM_LSR_Present_Pos*/) /*!< ITM LSR: Present Mask */ - -/*@}*/ /* end of group CMSIS_ITM */ - - -/** - \ingroup CMSIS_core_register - \defgroup CMSIS_DWT Data Watchpoint and Trace (DWT) - \brief Type definitions for the Data Watchpoint and Trace (DWT) - @{ - */ - -/** - \brief Structure type to access the Data Watchpoint and Trace Register (DWT). - */ -typedef struct -{ - __IOM uint32_t CTRL; /*!< Offset: 0x000 (R/W) Control Register */ - __IOM uint32_t CYCCNT; /*!< Offset: 0x004 (R/W) Cycle Count Register */ - __IOM uint32_t CPICNT; /*!< Offset: 0x008 (R/W) CPI Count Register */ - __IOM uint32_t EXCCNT; /*!< Offset: 0x00C (R/W) Exception Overhead Count Register */ - __IOM uint32_t SLEEPCNT; /*!< Offset: 0x010 (R/W) Sleep Count Register */ - __IOM uint32_t LSUCNT; /*!< Offset: 0x014 (R/W) LSU Count Register */ - __IOM uint32_t FOLDCNT; /*!< Offset: 0x018 (R/W) Folded-instruction Count Register */ - __IM uint32_t PCSR; /*!< Offset: 0x01C (R/ ) Program Counter Sample Register */ - __IOM uint32_t COMP0; /*!< Offset: 0x020 (R/W) Comparator Register 0 */ - __IOM uint32_t MASK0; /*!< Offset: 0x024 (R/W) Mask Register 0 */ - __IOM uint32_t FUNCTION0; /*!< Offset: 0x028 (R/W) Function Register 0 */ - uint32_t RESERVED0[1U]; - __IOM uint32_t COMP1; /*!< Offset: 0x030 (R/W) Comparator Register 1 */ - __IOM uint32_t MASK1; /*!< Offset: 0x034 (R/W) Mask Register 1 */ - __IOM uint32_t FUNCTION1; /*!< Offset: 0x038 (R/W) Function Register 1 */ - uint32_t RESERVED1[1U]; - __IOM uint32_t COMP2; /*!< Offset: 0x040 (R/W) Comparator Register 2 */ - __IOM uint32_t MASK2; /*!< Offset: 0x044 (R/W) Mask Register 2 */ - __IOM uint32_t FUNCTION2; /*!< Offset: 0x048 (R/W) Function Register 2 */ - uint32_t RESERVED2[1U]; - __IOM uint32_t COMP3; /*!< Offset: 0x050 (R/W) Comparator Register 3 */ - __IOM uint32_t MASK3; /*!< Offset: 0x054 (R/W) Mask Register 3 */ - __IOM uint32_t FUNCTION3; /*!< Offset: 0x058 (R/W) Function Register 3 */ - uint32_t RESERVED3[981U]; - __OM uint32_t LAR; /*!< Offset: 0xFB0 ( W) Lock Access Register */ - __IM uint32_t LSR; /*!< Offset: 0xFB4 (R ) Lock Status Register */ -} DWT_Type; - -/* DWT Control Register Definitions */ -#define DWT_CTRL_NUMCOMP_Pos 28U /*!< DWT CTRL: NUMCOMP Position */ -#define DWT_CTRL_NUMCOMP_Msk (0xFUL << DWT_CTRL_NUMCOMP_Pos) /*!< DWT CTRL: NUMCOMP Mask */ - -#define DWT_CTRL_NOTRCPKT_Pos 27U /*!< DWT CTRL: NOTRCPKT Position */ -#define DWT_CTRL_NOTRCPKT_Msk (0x1UL << DWT_CTRL_NOTRCPKT_Pos) /*!< DWT CTRL: NOTRCPKT Mask */ - -#define DWT_CTRL_NOEXTTRIG_Pos 26U /*!< DWT CTRL: NOEXTTRIG Position */ -#define DWT_CTRL_NOEXTTRIG_Msk (0x1UL << DWT_CTRL_NOEXTTRIG_Pos) /*!< DWT CTRL: NOEXTTRIG Mask */ - -#define DWT_CTRL_NOCYCCNT_Pos 25U /*!< DWT CTRL: NOCYCCNT Position */ -#define DWT_CTRL_NOCYCCNT_Msk (0x1UL << DWT_CTRL_NOCYCCNT_Pos) /*!< DWT CTRL: NOCYCCNT Mask */ - -#define DWT_CTRL_NOPRFCNT_Pos 24U /*!< DWT CTRL: NOPRFCNT Position */ -#define DWT_CTRL_NOPRFCNT_Msk (0x1UL << DWT_CTRL_NOPRFCNT_Pos) /*!< DWT CTRL: NOPRFCNT Mask */ - -#define DWT_CTRL_CYCEVTENA_Pos 22U /*!< DWT CTRL: CYCEVTENA Position */ -#define DWT_CTRL_CYCEVTENA_Msk (0x1UL << DWT_CTRL_CYCEVTENA_Pos) /*!< DWT CTRL: CYCEVTENA Mask */ - -#define DWT_CTRL_FOLDEVTENA_Pos 21U /*!< DWT CTRL: FOLDEVTENA Position */ -#define DWT_CTRL_FOLDEVTENA_Msk (0x1UL << DWT_CTRL_FOLDEVTENA_Pos) /*!< DWT CTRL: FOLDEVTENA Mask */ - -#define DWT_CTRL_LSUEVTENA_Pos 20U /*!< DWT CTRL: LSUEVTENA Position */ -#define DWT_CTRL_LSUEVTENA_Msk (0x1UL << DWT_CTRL_LSUEVTENA_Pos) /*!< DWT CTRL: LSUEVTENA Mask */ - -#define DWT_CTRL_SLEEPEVTENA_Pos 19U /*!< DWT CTRL: SLEEPEVTENA Position */ -#define DWT_CTRL_SLEEPEVTENA_Msk (0x1UL << DWT_CTRL_SLEEPEVTENA_Pos) /*!< DWT CTRL: SLEEPEVTENA Mask */ - -#define DWT_CTRL_EXCEVTENA_Pos 18U /*!< DWT CTRL: EXCEVTENA Position */ -#define DWT_CTRL_EXCEVTENA_Msk (0x1UL << DWT_CTRL_EXCEVTENA_Pos) /*!< DWT CTRL: EXCEVTENA Mask */ - -#define DWT_CTRL_CPIEVTENA_Pos 17U /*!< DWT CTRL: CPIEVTENA Position */ -#define DWT_CTRL_CPIEVTENA_Msk (0x1UL << DWT_CTRL_CPIEVTENA_Pos) /*!< DWT CTRL: CPIEVTENA Mask */ - -#define DWT_CTRL_EXCTRCENA_Pos 16U /*!< DWT CTRL: EXCTRCENA Position */ -#define DWT_CTRL_EXCTRCENA_Msk (0x1UL << DWT_CTRL_EXCTRCENA_Pos) /*!< DWT CTRL: EXCTRCENA Mask */ - -#define DWT_CTRL_PCSAMPLENA_Pos 12U /*!< DWT CTRL: PCSAMPLENA Position */ -#define DWT_CTRL_PCSAMPLENA_Msk (0x1UL << DWT_CTRL_PCSAMPLENA_Pos) /*!< DWT CTRL: PCSAMPLENA Mask */ - -#define DWT_CTRL_SYNCTAP_Pos 10U /*!< DWT CTRL: SYNCTAP Position */ -#define DWT_CTRL_SYNCTAP_Msk (0x3UL << DWT_CTRL_SYNCTAP_Pos) /*!< DWT CTRL: SYNCTAP Mask */ - -#define DWT_CTRL_CYCTAP_Pos 9U /*!< DWT CTRL: CYCTAP Position */ -#define DWT_CTRL_CYCTAP_Msk (0x1UL << DWT_CTRL_CYCTAP_Pos) /*!< DWT CTRL: CYCTAP Mask */ - -#define DWT_CTRL_POSTINIT_Pos 5U /*!< DWT CTRL: POSTINIT Position */ -#define DWT_CTRL_POSTINIT_Msk (0xFUL << DWT_CTRL_POSTINIT_Pos) /*!< DWT CTRL: POSTINIT Mask */ - -#define DWT_CTRL_POSTPRESET_Pos 1U /*!< DWT CTRL: POSTPRESET Position */ -#define DWT_CTRL_POSTPRESET_Msk (0xFUL << DWT_CTRL_POSTPRESET_Pos) /*!< DWT CTRL: POSTPRESET Mask */ - -#define DWT_CTRL_CYCCNTENA_Pos 0U /*!< DWT CTRL: CYCCNTENA Position */ -#define DWT_CTRL_CYCCNTENA_Msk (0x1UL /*<< DWT_CTRL_CYCCNTENA_Pos*/) /*!< DWT CTRL: CYCCNTENA Mask */ - -/* DWT CPI Count Register Definitions */ -#define DWT_CPICNT_CPICNT_Pos 0U /*!< DWT CPICNT: CPICNT Position */ -#define DWT_CPICNT_CPICNT_Msk (0xFFUL /*<< DWT_CPICNT_CPICNT_Pos*/) /*!< DWT CPICNT: CPICNT Mask */ - -/* DWT Exception Overhead Count Register Definitions */ -#define DWT_EXCCNT_EXCCNT_Pos 0U /*!< DWT EXCCNT: EXCCNT Position */ -#define DWT_EXCCNT_EXCCNT_Msk (0xFFUL /*<< DWT_EXCCNT_EXCCNT_Pos*/) /*!< DWT EXCCNT: EXCCNT Mask */ - -/* DWT Sleep Count Register Definitions */ -#define DWT_SLEEPCNT_SLEEPCNT_Pos 0U /*!< DWT SLEEPCNT: SLEEPCNT Position */ -#define DWT_SLEEPCNT_SLEEPCNT_Msk (0xFFUL /*<< DWT_SLEEPCNT_SLEEPCNT_Pos*/) /*!< DWT SLEEPCNT: SLEEPCNT Mask */ - -/* DWT LSU Count Register Definitions */ -#define DWT_LSUCNT_LSUCNT_Pos 0U /*!< DWT LSUCNT: LSUCNT Position */ -#define DWT_LSUCNT_LSUCNT_Msk (0xFFUL /*<< DWT_LSUCNT_LSUCNT_Pos*/) /*!< DWT LSUCNT: LSUCNT Mask */ - -/* DWT Folded-instruction Count Register Definitions */ -#define DWT_FOLDCNT_FOLDCNT_Pos 0U /*!< DWT FOLDCNT: FOLDCNT Position */ -#define DWT_FOLDCNT_FOLDCNT_Msk (0xFFUL /*<< DWT_FOLDCNT_FOLDCNT_Pos*/) /*!< DWT FOLDCNT: FOLDCNT Mask */ - -/* DWT Comparator Mask Register Definitions */ -#define DWT_MASK_MASK_Pos 0U /*!< DWT MASK: MASK Position */ -#define DWT_MASK_MASK_Msk (0x1FUL /*<< DWT_MASK_MASK_Pos*/) /*!< DWT MASK: MASK Mask */ - -/* DWT Comparator Function Register Definitions */ -#define DWT_FUNCTION_MATCHED_Pos 24U /*!< DWT FUNCTION: MATCHED Position */ -#define DWT_FUNCTION_MATCHED_Msk (0x1UL << DWT_FUNCTION_MATCHED_Pos) /*!< DWT FUNCTION: MATCHED Mask */ - -#define DWT_FUNCTION_DATAVADDR1_Pos 16U /*!< DWT FUNCTION: DATAVADDR1 Position */ -#define DWT_FUNCTION_DATAVADDR1_Msk (0xFUL << DWT_FUNCTION_DATAVADDR1_Pos) /*!< DWT FUNCTION: DATAVADDR1 Mask */ - -#define DWT_FUNCTION_DATAVADDR0_Pos 12U /*!< DWT FUNCTION: DATAVADDR0 Position */ -#define DWT_FUNCTION_DATAVADDR0_Msk (0xFUL << DWT_FUNCTION_DATAVADDR0_Pos) /*!< DWT FUNCTION: DATAVADDR0 Mask */ - -#define DWT_FUNCTION_DATAVSIZE_Pos 10U /*!< DWT FUNCTION: DATAVSIZE Position */ -#define DWT_FUNCTION_DATAVSIZE_Msk (0x3UL << DWT_FUNCTION_DATAVSIZE_Pos) /*!< DWT FUNCTION: DATAVSIZE Mask */ - -#define DWT_FUNCTION_LNK1ENA_Pos 9U /*!< DWT FUNCTION: LNK1ENA Position */ -#define DWT_FUNCTION_LNK1ENA_Msk (0x1UL << DWT_FUNCTION_LNK1ENA_Pos) /*!< DWT FUNCTION: LNK1ENA Mask */ - -#define DWT_FUNCTION_DATAVMATCH_Pos 8U /*!< DWT FUNCTION: DATAVMATCH Position */ -#define DWT_FUNCTION_DATAVMATCH_Msk (0x1UL << DWT_FUNCTION_DATAVMATCH_Pos) /*!< DWT FUNCTION: DATAVMATCH Mask */ - -#define DWT_FUNCTION_CYCMATCH_Pos 7U /*!< DWT FUNCTION: CYCMATCH Position */ -#define DWT_FUNCTION_CYCMATCH_Msk (0x1UL << DWT_FUNCTION_CYCMATCH_Pos) /*!< DWT FUNCTION: CYCMATCH Mask */ - -#define DWT_FUNCTION_EMITRANGE_Pos 5U /*!< DWT FUNCTION: EMITRANGE Position */ -#define DWT_FUNCTION_EMITRANGE_Msk (0x1UL << DWT_FUNCTION_EMITRANGE_Pos) /*!< DWT FUNCTION: EMITRANGE Mask */ - -#define DWT_FUNCTION_FUNCTION_Pos 0U /*!< DWT FUNCTION: FUNCTION Position */ -#define DWT_FUNCTION_FUNCTION_Msk (0xFUL /*<< DWT_FUNCTION_FUNCTION_Pos*/) /*!< DWT FUNCTION: FUNCTION Mask */ - -/*@}*/ /* end of group CMSIS_DWT */ - - -/** - \ingroup CMSIS_core_register - \defgroup CMSIS_TPI Trace Port Interface (TPI) - \brief Type definitions for the Trace Port Interface (TPI) - @{ - */ - -/** - \brief Structure type to access the Trace Port Interface Register (TPI). - */ -typedef struct -{ - __IM uint32_t SSPSR; /*!< Offset: 0x000 (R/ ) Supported Parallel Port Size Register */ - __IOM uint32_t CSPSR; /*!< Offset: 0x004 (R/W) Current Parallel Port Size Register */ - uint32_t RESERVED0[2U]; - __IOM uint32_t ACPR; /*!< Offset: 0x010 (R/W) Asynchronous Clock Prescaler Register */ - uint32_t RESERVED1[55U]; - __IOM uint32_t SPPR; /*!< Offset: 0x0F0 (R/W) Selected Pin Protocol Register */ - uint32_t RESERVED2[131U]; - __IM uint32_t FFSR; /*!< Offset: 0x300 (R/ ) Formatter and Flush Status Register */ - __IOM uint32_t FFCR; /*!< Offset: 0x304 (R/W) Formatter and Flush Control Register */ - __IM uint32_t FSCR; /*!< Offset: 0x308 (R/ ) Formatter Synchronization Counter Register */ - uint32_t RESERVED3[759U]; - __IM uint32_t TRIGGER; /*!< Offset: 0xEE8 (R/ ) TRIGGER Register */ - __IM uint32_t FIFO0; /*!< Offset: 0xEEC (R/ ) Integration ETM Data */ - __IM uint32_t ITATBCTR2; /*!< Offset: 0xEF0 (R/ ) ITATBCTR2 */ - uint32_t RESERVED4[1U]; - __IM uint32_t ITATBCTR0; /*!< Offset: 0xEF8 (R/ ) ITATBCTR0 */ - __IM uint32_t FIFO1; /*!< Offset: 0xEFC (R/ ) Integration ITM Data */ - __IOM uint32_t ITCTRL; /*!< Offset: 0xF00 (R/W) Integration Mode Control */ - uint32_t RESERVED5[39U]; - __IOM uint32_t CLAIMSET; /*!< Offset: 0xFA0 (R/W) Claim tag set */ - __IOM uint32_t CLAIMCLR; /*!< Offset: 0xFA4 (R/W) Claim tag clear */ - uint32_t RESERVED7[8U]; - __IM uint32_t DEVID; /*!< Offset: 0xFC8 (R/ ) TPIU_DEVID */ - __IM uint32_t DEVTYPE; /*!< Offset: 0xFCC (R/ ) TPIU_DEVTYPE */ -} TPI_Type; - -/* TPI Asynchronous Clock Prescaler Register Definitions */ -#define TPI_ACPR_PRESCALER_Pos 0U /*!< TPI ACPR: PRESCALER Position */ -#define TPI_ACPR_PRESCALER_Msk (0x1FFFUL /*<< TPI_ACPR_PRESCALER_Pos*/) /*!< TPI ACPR: PRESCALER Mask */ - -/* TPI Selected Pin Protocol Register Definitions */ -#define TPI_SPPR_TXMODE_Pos 0U /*!< TPI SPPR: TXMODE Position */ -#define TPI_SPPR_TXMODE_Msk (0x3UL /*<< TPI_SPPR_TXMODE_Pos*/) /*!< TPI SPPR: TXMODE Mask */ - -/* TPI Formatter and Flush Status Register Definitions */ -#define TPI_FFSR_FtNonStop_Pos 3U /*!< TPI FFSR: FtNonStop Position */ -#define TPI_FFSR_FtNonStop_Msk (0x1UL << TPI_FFSR_FtNonStop_Pos) /*!< TPI FFSR: FtNonStop Mask */ - -#define TPI_FFSR_TCPresent_Pos 2U /*!< TPI FFSR: TCPresent Position */ -#define TPI_FFSR_TCPresent_Msk (0x1UL << TPI_FFSR_TCPresent_Pos) /*!< TPI FFSR: TCPresent Mask */ - -#define TPI_FFSR_FtStopped_Pos 1U /*!< TPI FFSR: FtStopped Position */ -#define TPI_FFSR_FtStopped_Msk (0x1UL << TPI_FFSR_FtStopped_Pos) /*!< TPI FFSR: FtStopped Mask */ - -#define TPI_FFSR_FlInProg_Pos 0U /*!< TPI FFSR: FlInProg Position */ -#define TPI_FFSR_FlInProg_Msk (0x1UL /*<< TPI_FFSR_FlInProg_Pos*/) /*!< TPI FFSR: FlInProg Mask */ - -/* TPI Formatter and Flush Control Register Definitions */ -#define TPI_FFCR_TrigIn_Pos 8U /*!< TPI FFCR: TrigIn Position */ -#define TPI_FFCR_TrigIn_Msk (0x1UL << TPI_FFCR_TrigIn_Pos) /*!< TPI FFCR: TrigIn Mask */ - -#define TPI_FFCR_EnFCont_Pos 1U /*!< TPI FFCR: EnFCont Position */ -#define TPI_FFCR_EnFCont_Msk (0x1UL << TPI_FFCR_EnFCont_Pos) /*!< TPI FFCR: EnFCont Mask */ - -/* TPI TRIGGER Register Definitions */ -#define TPI_TRIGGER_TRIGGER_Pos 0U /*!< TPI TRIGGER: TRIGGER Position */ -#define TPI_TRIGGER_TRIGGER_Msk (0x1UL /*<< TPI_TRIGGER_TRIGGER_Pos*/) /*!< TPI TRIGGER: TRIGGER Mask */ - -/* TPI Integration ETM Data Register Definitions (FIFO0) */ -#define TPI_FIFO0_ITM_ATVALID_Pos 29U /*!< TPI FIFO0: ITM_ATVALID Position */ -#define TPI_FIFO0_ITM_ATVALID_Msk (0x3UL << TPI_FIFO0_ITM_ATVALID_Pos) /*!< TPI FIFO0: ITM_ATVALID Mask */ - -#define TPI_FIFO0_ITM_bytecount_Pos 27U /*!< TPI FIFO0: ITM_bytecount Position */ -#define TPI_FIFO0_ITM_bytecount_Msk (0x3UL << TPI_FIFO0_ITM_bytecount_Pos) /*!< TPI FIFO0: ITM_bytecount Mask */ - -#define TPI_FIFO0_ETM_ATVALID_Pos 26U /*!< TPI FIFO0: ETM_ATVALID Position */ -#define TPI_FIFO0_ETM_ATVALID_Msk (0x3UL << TPI_FIFO0_ETM_ATVALID_Pos) /*!< TPI FIFO0: ETM_ATVALID Mask */ - -#define TPI_FIFO0_ETM_bytecount_Pos 24U /*!< TPI FIFO0: ETM_bytecount Position */ -#define TPI_FIFO0_ETM_bytecount_Msk (0x3UL << TPI_FIFO0_ETM_bytecount_Pos) /*!< TPI FIFO0: ETM_bytecount Mask */ - -#define TPI_FIFO0_ETM2_Pos 16U /*!< TPI FIFO0: ETM2 Position */ -#define TPI_FIFO0_ETM2_Msk (0xFFUL << TPI_FIFO0_ETM2_Pos) /*!< TPI FIFO0: ETM2 Mask */ - -#define TPI_FIFO0_ETM1_Pos 8U /*!< TPI FIFO0: ETM1 Position */ -#define TPI_FIFO0_ETM1_Msk (0xFFUL << TPI_FIFO0_ETM1_Pos) /*!< TPI FIFO0: ETM1 Mask */ - -#define TPI_FIFO0_ETM0_Pos 0U /*!< TPI FIFO0: ETM0 Position */ -#define TPI_FIFO0_ETM0_Msk (0xFFUL /*<< TPI_FIFO0_ETM0_Pos*/) /*!< TPI FIFO0: ETM0 Mask */ - -/* TPI ITATBCTR2 Register Definitions */ -#define TPI_ITATBCTR2_ATREADY2_Pos 0U /*!< TPI ITATBCTR2: ATREADY2 Position */ -#define TPI_ITATBCTR2_ATREADY2_Msk (0x1UL /*<< TPI_ITATBCTR2_ATREADY2_Pos*/) /*!< TPI ITATBCTR2: ATREADY2 Mask */ - -#define TPI_ITATBCTR2_ATREADY1_Pos 0U /*!< TPI ITATBCTR2: ATREADY1 Position */ -#define TPI_ITATBCTR2_ATREADY1_Msk (0x1UL /*<< TPI_ITATBCTR2_ATREADY1_Pos*/) /*!< TPI ITATBCTR2: ATREADY1 Mask */ - -/* TPI Integration ITM Data Register Definitions (FIFO1) */ -#define TPI_FIFO1_ITM_ATVALID_Pos 29U /*!< TPI FIFO1: ITM_ATVALID Position */ -#define TPI_FIFO1_ITM_ATVALID_Msk (0x3UL << TPI_FIFO1_ITM_ATVALID_Pos) /*!< TPI FIFO1: ITM_ATVALID Mask */ - -#define TPI_FIFO1_ITM_bytecount_Pos 27U /*!< TPI FIFO1: ITM_bytecount Position */ -#define TPI_FIFO1_ITM_bytecount_Msk (0x3UL << TPI_FIFO1_ITM_bytecount_Pos) /*!< TPI FIFO1: ITM_bytecount Mask */ - -#define TPI_FIFO1_ETM_ATVALID_Pos 26U /*!< TPI FIFO1: ETM_ATVALID Position */ -#define TPI_FIFO1_ETM_ATVALID_Msk (0x3UL << TPI_FIFO1_ETM_ATVALID_Pos) /*!< TPI FIFO1: ETM_ATVALID Mask */ - -#define TPI_FIFO1_ETM_bytecount_Pos 24U /*!< TPI FIFO1: ETM_bytecount Position */ -#define TPI_FIFO1_ETM_bytecount_Msk (0x3UL << TPI_FIFO1_ETM_bytecount_Pos) /*!< TPI FIFO1: ETM_bytecount Mask */ - -#define TPI_FIFO1_ITM2_Pos 16U /*!< TPI FIFO1: ITM2 Position */ -#define TPI_FIFO1_ITM2_Msk (0xFFUL << TPI_FIFO1_ITM2_Pos) /*!< TPI FIFO1: ITM2 Mask */ - -#define TPI_FIFO1_ITM1_Pos 8U /*!< TPI FIFO1: ITM1 Position */ -#define TPI_FIFO1_ITM1_Msk (0xFFUL << TPI_FIFO1_ITM1_Pos) /*!< TPI FIFO1: ITM1 Mask */ - -#define TPI_FIFO1_ITM0_Pos 0U /*!< TPI FIFO1: ITM0 Position */ -#define TPI_FIFO1_ITM0_Msk (0xFFUL /*<< TPI_FIFO1_ITM0_Pos*/) /*!< TPI FIFO1: ITM0 Mask */ - -/* TPI ITATBCTR0 Register Definitions */ -#define TPI_ITATBCTR0_ATREADY2_Pos 0U /*!< TPI ITATBCTR0: ATREADY2 Position */ -#define TPI_ITATBCTR0_ATREADY2_Msk (0x1UL /*<< TPI_ITATBCTR0_ATREADY2_Pos*/) /*!< TPI ITATBCTR0: ATREADY2 Mask */ - -#define TPI_ITATBCTR0_ATREADY1_Pos 0U /*!< TPI ITATBCTR0: ATREADY1 Position */ -#define TPI_ITATBCTR0_ATREADY1_Msk (0x1UL /*<< TPI_ITATBCTR0_ATREADY1_Pos*/) /*!< TPI ITATBCTR0: ATREADY1 Mask */ - -/* TPI Integration Mode Control Register Definitions */ -#define TPI_ITCTRL_Mode_Pos 0U /*!< TPI ITCTRL: Mode Position */ -#define TPI_ITCTRL_Mode_Msk (0x3UL /*<< TPI_ITCTRL_Mode_Pos*/) /*!< TPI ITCTRL: Mode Mask */ - -/* TPI DEVID Register Definitions */ -#define TPI_DEVID_NRZVALID_Pos 11U /*!< TPI DEVID: NRZVALID Position */ -#define TPI_DEVID_NRZVALID_Msk (0x1UL << TPI_DEVID_NRZVALID_Pos) /*!< TPI DEVID: NRZVALID Mask */ - -#define TPI_DEVID_MANCVALID_Pos 10U /*!< TPI DEVID: MANCVALID Position */ -#define TPI_DEVID_MANCVALID_Msk (0x1UL << TPI_DEVID_MANCVALID_Pos) /*!< TPI DEVID: MANCVALID Mask */ - -#define TPI_DEVID_PTINVALID_Pos 9U /*!< TPI DEVID: PTINVALID Position */ -#define TPI_DEVID_PTINVALID_Msk (0x1UL << TPI_DEVID_PTINVALID_Pos) /*!< TPI DEVID: PTINVALID Mask */ - -#define TPI_DEVID_MinBufSz_Pos 6U /*!< TPI DEVID: MinBufSz Position */ -#define TPI_DEVID_MinBufSz_Msk (0x7UL << TPI_DEVID_MinBufSz_Pos) /*!< TPI DEVID: MinBufSz Mask */ - -#define TPI_DEVID_AsynClkIn_Pos 5U /*!< TPI DEVID: AsynClkIn Position */ -#define TPI_DEVID_AsynClkIn_Msk (0x1UL << TPI_DEVID_AsynClkIn_Pos) /*!< TPI DEVID: AsynClkIn Mask */ - -#define TPI_DEVID_NrTraceInput_Pos 0U /*!< TPI DEVID: NrTraceInput Position */ -#define TPI_DEVID_NrTraceInput_Msk (0x1FUL /*<< TPI_DEVID_NrTraceInput_Pos*/) /*!< TPI DEVID: NrTraceInput Mask */ - -/* TPI DEVTYPE Register Definitions */ -#define TPI_DEVTYPE_SubType_Pos 4U /*!< TPI DEVTYPE: SubType Position */ -#define TPI_DEVTYPE_SubType_Msk (0xFUL /*<< TPI_DEVTYPE_SubType_Pos*/) /*!< TPI DEVTYPE: SubType Mask */ - -#define TPI_DEVTYPE_MajorType_Pos 0U /*!< TPI DEVTYPE: MajorType Position */ -#define TPI_DEVTYPE_MajorType_Msk (0xFUL << TPI_DEVTYPE_MajorType_Pos) /*!< TPI DEVTYPE: MajorType Mask */ - -/*@}*/ /* end of group CMSIS_TPI */ - - -#if defined (__MPU_PRESENT) && (__MPU_PRESENT == 1U) -/** - \ingroup CMSIS_core_register - \defgroup CMSIS_MPU Memory Protection Unit (MPU) - \brief Type definitions for the Memory Protection Unit (MPU) - @{ - */ - -/** - \brief Structure type to access the Memory Protection Unit (MPU). - */ -typedef struct -{ - __IM uint32_t TYPE; /*!< Offset: 0x000 (R/ ) MPU Type Register */ - __IOM uint32_t CTRL; /*!< Offset: 0x004 (R/W) MPU Control Register */ - __IOM uint32_t RNR; /*!< Offset: 0x008 (R/W) MPU Region RNRber Register */ - __IOM uint32_t RBAR; /*!< Offset: 0x00C (R/W) MPU Region Base Address Register */ - __IOM uint32_t RASR; /*!< Offset: 0x010 (R/W) MPU Region Attribute and Size Register */ - __IOM uint32_t RBAR_A1; /*!< Offset: 0x014 (R/W) MPU Alias 1 Region Base Address Register */ - __IOM uint32_t RASR_A1; /*!< Offset: 0x018 (R/W) MPU Alias 1 Region Attribute and Size Register */ - __IOM uint32_t RBAR_A2; /*!< Offset: 0x01C (R/W) MPU Alias 2 Region Base Address Register */ - __IOM uint32_t RASR_A2; /*!< Offset: 0x020 (R/W) MPU Alias 2 Region Attribute and Size Register */ - __IOM uint32_t RBAR_A3; /*!< Offset: 0x024 (R/W) MPU Alias 3 Region Base Address Register */ - __IOM uint32_t RASR_A3; /*!< Offset: 0x028 (R/W) MPU Alias 3 Region Attribute and Size Register */ -} MPU_Type; - -#define MPU_TYPE_RALIASES 4U - -/* MPU Type Register Definitions */ -#define MPU_TYPE_IREGION_Pos 16U /*!< MPU TYPE: IREGION Position */ -#define MPU_TYPE_IREGION_Msk (0xFFUL << MPU_TYPE_IREGION_Pos) /*!< MPU TYPE: IREGION Mask */ - -#define MPU_TYPE_DREGION_Pos 8U /*!< MPU TYPE: DREGION Position */ -#define MPU_TYPE_DREGION_Msk (0xFFUL << MPU_TYPE_DREGION_Pos) /*!< MPU TYPE: DREGION Mask */ - -#define MPU_TYPE_SEPARATE_Pos 0U /*!< MPU TYPE: SEPARATE Position */ -#define MPU_TYPE_SEPARATE_Msk (1UL /*<< MPU_TYPE_SEPARATE_Pos*/) /*!< MPU TYPE: SEPARATE Mask */ - -/* MPU Control Register Definitions */ -#define MPU_CTRL_PRIVDEFENA_Pos 2U /*!< MPU CTRL: PRIVDEFENA Position */ -#define MPU_CTRL_PRIVDEFENA_Msk (1UL << MPU_CTRL_PRIVDEFENA_Pos) /*!< MPU CTRL: PRIVDEFENA Mask */ - -#define MPU_CTRL_HFNMIENA_Pos 1U /*!< MPU CTRL: HFNMIENA Position */ -#define MPU_CTRL_HFNMIENA_Msk (1UL << MPU_CTRL_HFNMIENA_Pos) /*!< MPU CTRL: HFNMIENA Mask */ - -#define MPU_CTRL_ENABLE_Pos 0U /*!< MPU CTRL: ENABLE Position */ -#define MPU_CTRL_ENABLE_Msk (1UL /*<< MPU_CTRL_ENABLE_Pos*/) /*!< MPU CTRL: ENABLE Mask */ - -/* MPU Region Number Register Definitions */ -#define MPU_RNR_REGION_Pos 0U /*!< MPU RNR: REGION Position */ -#define MPU_RNR_REGION_Msk (0xFFUL /*<< MPU_RNR_REGION_Pos*/) /*!< MPU RNR: REGION Mask */ - -/* MPU Region Base Address Register Definitions */ -#define MPU_RBAR_ADDR_Pos 5U /*!< MPU RBAR: ADDR Position */ -#define MPU_RBAR_ADDR_Msk (0x7FFFFFFUL << MPU_RBAR_ADDR_Pos) /*!< MPU RBAR: ADDR Mask */ - -#define MPU_RBAR_VALID_Pos 4U /*!< MPU RBAR: VALID Position */ -#define MPU_RBAR_VALID_Msk (1UL << MPU_RBAR_VALID_Pos) /*!< MPU RBAR: VALID Mask */ - -#define MPU_RBAR_REGION_Pos 0U /*!< MPU RBAR: REGION Position */ -#define MPU_RBAR_REGION_Msk (0xFUL /*<< MPU_RBAR_REGION_Pos*/) /*!< MPU RBAR: REGION Mask */ - -/* MPU Region Attribute and Size Register Definitions */ -#define MPU_RASR_ATTRS_Pos 16U /*!< MPU RASR: MPU Region Attribute field Position */ -#define MPU_RASR_ATTRS_Msk (0xFFFFUL << MPU_RASR_ATTRS_Pos) /*!< MPU RASR: MPU Region Attribute field Mask */ - -#define MPU_RASR_XN_Pos 28U /*!< MPU RASR: ATTRS.XN Position */ -#define MPU_RASR_XN_Msk (1UL << MPU_RASR_XN_Pos) /*!< MPU RASR: ATTRS.XN Mask */ - -#define MPU_RASR_AP_Pos 24U /*!< MPU RASR: ATTRS.AP Position */ -#define MPU_RASR_AP_Msk (0x7UL << MPU_RASR_AP_Pos) /*!< MPU RASR: ATTRS.AP Mask */ - -#define MPU_RASR_TEX_Pos 19U /*!< MPU RASR: ATTRS.TEX Position */ -#define MPU_RASR_TEX_Msk (0x7UL << MPU_RASR_TEX_Pos) /*!< MPU RASR: ATTRS.TEX Mask */ - -#define MPU_RASR_S_Pos 18U /*!< MPU RASR: ATTRS.S Position */ -#define MPU_RASR_S_Msk (1UL << MPU_RASR_S_Pos) /*!< MPU RASR: ATTRS.S Mask */ - -#define MPU_RASR_C_Pos 17U /*!< MPU RASR: ATTRS.C Position */ -#define MPU_RASR_C_Msk (1UL << MPU_RASR_C_Pos) /*!< MPU RASR: ATTRS.C Mask */ - -#define MPU_RASR_B_Pos 16U /*!< MPU RASR: ATTRS.B Position */ -#define MPU_RASR_B_Msk (1UL << MPU_RASR_B_Pos) /*!< MPU RASR: ATTRS.B Mask */ - -#define MPU_RASR_SRD_Pos 8U /*!< MPU RASR: Sub-Region Disable Position */ -#define MPU_RASR_SRD_Msk (0xFFUL << MPU_RASR_SRD_Pos) /*!< MPU RASR: Sub-Region Disable Mask */ - -#define MPU_RASR_SIZE_Pos 1U /*!< MPU RASR: Region Size Field Position */ -#define MPU_RASR_SIZE_Msk (0x1FUL << MPU_RASR_SIZE_Pos) /*!< MPU RASR: Region Size Field Mask */ - -#define MPU_RASR_ENABLE_Pos 0U /*!< MPU RASR: Region enable bit Position */ -#define MPU_RASR_ENABLE_Msk (1UL /*<< MPU_RASR_ENABLE_Pos*/) /*!< MPU RASR: Region enable bit Disable Mask */ - -/*@} end of group CMSIS_MPU */ -#endif /* defined (__MPU_PRESENT) && (__MPU_PRESENT == 1U) */ - - -/** - \ingroup CMSIS_core_register - \defgroup CMSIS_FPU Floating Point Unit (FPU) - \brief Type definitions for the Floating Point Unit (FPU) - @{ - */ - -/** - \brief Structure type to access the Floating Point Unit (FPU). - */ -typedef struct -{ - uint32_t RESERVED0[1U]; - __IOM uint32_t FPCCR; /*!< Offset: 0x004 (R/W) Floating-Point Context Control Register */ - __IOM uint32_t FPCAR; /*!< Offset: 0x008 (R/W) Floating-Point Context Address Register */ - __IOM uint32_t FPDSCR; /*!< Offset: 0x00C (R/W) Floating-Point Default Status Control Register */ - __IM uint32_t MVFR0; /*!< Offset: 0x010 (R/ ) Media and FP Feature Register 0 */ - __IM uint32_t MVFR1; /*!< Offset: 0x014 (R/ ) Media and FP Feature Register 1 */ - __IM uint32_t MVFR2; /*!< Offset: 0x018 (R/ ) Media and FP Feature Register 2 */ -} FPU_Type; - -/* Floating-Point Context Control Register Definitions */ -#define FPU_FPCCR_ASPEN_Pos 31U /*!< FPCCR: ASPEN bit Position */ -#define FPU_FPCCR_ASPEN_Msk (1UL << FPU_FPCCR_ASPEN_Pos) /*!< FPCCR: ASPEN bit Mask */ - -#define FPU_FPCCR_LSPEN_Pos 30U /*!< FPCCR: LSPEN Position */ -#define FPU_FPCCR_LSPEN_Msk (1UL << FPU_FPCCR_LSPEN_Pos) /*!< FPCCR: LSPEN bit Mask */ - -#define FPU_FPCCR_MONRDY_Pos 8U /*!< FPCCR: MONRDY Position */ -#define FPU_FPCCR_MONRDY_Msk (1UL << FPU_FPCCR_MONRDY_Pos) /*!< FPCCR: MONRDY bit Mask */ - -#define FPU_FPCCR_BFRDY_Pos 6U /*!< FPCCR: BFRDY Position */ -#define FPU_FPCCR_BFRDY_Msk (1UL << FPU_FPCCR_BFRDY_Pos) /*!< FPCCR: BFRDY bit Mask */ - -#define FPU_FPCCR_MMRDY_Pos 5U /*!< FPCCR: MMRDY Position */ -#define FPU_FPCCR_MMRDY_Msk (1UL << FPU_FPCCR_MMRDY_Pos) /*!< FPCCR: MMRDY bit Mask */ - -#define FPU_FPCCR_HFRDY_Pos 4U /*!< FPCCR: HFRDY Position */ -#define FPU_FPCCR_HFRDY_Msk (1UL << FPU_FPCCR_HFRDY_Pos) /*!< FPCCR: HFRDY bit Mask */ - -#define FPU_FPCCR_THREAD_Pos 3U /*!< FPCCR: processor mode bit Position */ -#define FPU_FPCCR_THREAD_Msk (1UL << FPU_FPCCR_THREAD_Pos) /*!< FPCCR: processor mode active bit Mask */ - -#define FPU_FPCCR_USER_Pos 1U /*!< FPCCR: privilege level bit Position */ -#define FPU_FPCCR_USER_Msk (1UL << FPU_FPCCR_USER_Pos) /*!< FPCCR: privilege level bit Mask */ - -#define FPU_FPCCR_LSPACT_Pos 0U /*!< FPCCR: Lazy state preservation active bit Position */ -#define FPU_FPCCR_LSPACT_Msk (1UL /*<< FPU_FPCCR_LSPACT_Pos*/) /*!< FPCCR: Lazy state preservation active bit Mask */ - -/* Floating-Point Context Address Register Definitions */ -#define FPU_FPCAR_ADDRESS_Pos 3U /*!< FPCAR: ADDRESS bit Position */ -#define FPU_FPCAR_ADDRESS_Msk (0x1FFFFFFFUL << FPU_FPCAR_ADDRESS_Pos) /*!< FPCAR: ADDRESS bit Mask */ - -/* Floating-Point Default Status Control Register Definitions */ -#define FPU_FPDSCR_AHP_Pos 26U /*!< FPDSCR: AHP bit Position */ -#define FPU_FPDSCR_AHP_Msk (1UL << FPU_FPDSCR_AHP_Pos) /*!< FPDSCR: AHP bit Mask */ - -#define FPU_FPDSCR_DN_Pos 25U /*!< FPDSCR: DN bit Position */ -#define FPU_FPDSCR_DN_Msk (1UL << FPU_FPDSCR_DN_Pos) /*!< FPDSCR: DN bit Mask */ - -#define FPU_FPDSCR_FZ_Pos 24U /*!< FPDSCR: FZ bit Position */ -#define FPU_FPDSCR_FZ_Msk (1UL << FPU_FPDSCR_FZ_Pos) /*!< FPDSCR: FZ bit Mask */ - -#define FPU_FPDSCR_RMode_Pos 22U /*!< FPDSCR: RMode bit Position */ -#define FPU_FPDSCR_RMode_Msk (3UL << FPU_FPDSCR_RMode_Pos) /*!< FPDSCR: RMode bit Mask */ - -/* Media and FP Feature Register 0 Definitions */ -#define FPU_MVFR0_FP_rounding_modes_Pos 28U /*!< MVFR0: FP rounding modes bits Position */ -#define FPU_MVFR0_FP_rounding_modes_Msk (0xFUL << FPU_MVFR0_FP_rounding_modes_Pos) /*!< MVFR0: FP rounding modes bits Mask */ - -#define FPU_MVFR0_Short_vectors_Pos 24U /*!< MVFR0: Short vectors bits Position */ -#define FPU_MVFR0_Short_vectors_Msk (0xFUL << FPU_MVFR0_Short_vectors_Pos) /*!< MVFR0: Short vectors bits Mask */ - -#define FPU_MVFR0_Square_root_Pos 20U /*!< MVFR0: Square root bits Position */ -#define FPU_MVFR0_Square_root_Msk (0xFUL << FPU_MVFR0_Square_root_Pos) /*!< MVFR0: Square root bits Mask */ - -#define FPU_MVFR0_Divide_Pos 16U /*!< MVFR0: Divide bits Position */ -#define FPU_MVFR0_Divide_Msk (0xFUL << FPU_MVFR0_Divide_Pos) /*!< MVFR0: Divide bits Mask */ - -#define FPU_MVFR0_FP_excep_trapping_Pos 12U /*!< MVFR0: FP exception trapping bits Position */ -#define FPU_MVFR0_FP_excep_trapping_Msk (0xFUL << FPU_MVFR0_FP_excep_trapping_Pos) /*!< MVFR0: FP exception trapping bits Mask */ - -#define FPU_MVFR0_Double_precision_Pos 8U /*!< MVFR0: Double-precision bits Position */ -#define FPU_MVFR0_Double_precision_Msk (0xFUL << FPU_MVFR0_Double_precision_Pos) /*!< MVFR0: Double-precision bits Mask */ - -#define FPU_MVFR0_Single_precision_Pos 4U /*!< MVFR0: Single-precision bits Position */ -#define FPU_MVFR0_Single_precision_Msk (0xFUL << FPU_MVFR0_Single_precision_Pos) /*!< MVFR0: Single-precision bits Mask */ - -#define FPU_MVFR0_A_SIMD_registers_Pos 0U /*!< MVFR0: A_SIMD registers bits Position */ -#define FPU_MVFR0_A_SIMD_registers_Msk (0xFUL /*<< FPU_MVFR0_A_SIMD_registers_Pos*/) /*!< MVFR0: A_SIMD registers bits Mask */ - -/* Media and FP Feature Register 1 Definitions */ -#define FPU_MVFR1_FP_fused_MAC_Pos 28U /*!< MVFR1: FP fused MAC bits Position */ -#define FPU_MVFR1_FP_fused_MAC_Msk (0xFUL << FPU_MVFR1_FP_fused_MAC_Pos) /*!< MVFR1: FP fused MAC bits Mask */ - -#define FPU_MVFR1_FP_HPFP_Pos 24U /*!< MVFR1: FP HPFP bits Position */ -#define FPU_MVFR1_FP_HPFP_Msk (0xFUL << FPU_MVFR1_FP_HPFP_Pos) /*!< MVFR1: FP HPFP bits Mask */ - -#define FPU_MVFR1_D_NaN_mode_Pos 4U /*!< MVFR1: D_NaN mode bits Position */ -#define FPU_MVFR1_D_NaN_mode_Msk (0xFUL << FPU_MVFR1_D_NaN_mode_Pos) /*!< MVFR1: D_NaN mode bits Mask */ - -#define FPU_MVFR1_FtZ_mode_Pos 0U /*!< MVFR1: FtZ mode bits Position */ -#define FPU_MVFR1_FtZ_mode_Msk (0xFUL /*<< FPU_MVFR1_FtZ_mode_Pos*/) /*!< MVFR1: FtZ mode bits Mask */ - -/* Media and FP Feature Register 2 Definitions */ - -/*@} end of group CMSIS_FPU */ - - -/** - \ingroup CMSIS_core_register - \defgroup CMSIS_CoreDebug Core Debug Registers (CoreDebug) - \brief Type definitions for the Core Debug Registers - @{ - */ - -/** - \brief Structure type to access the Core Debug Register (CoreDebug). - */ -typedef struct -{ - __IOM uint32_t DHCSR; /*!< Offset: 0x000 (R/W) Debug Halting Control and Status Register */ - __OM uint32_t DCRSR; /*!< Offset: 0x004 ( /W) Debug Core Register Selector Register */ - __IOM uint32_t DCRDR; /*!< Offset: 0x008 (R/W) Debug Core Register Data Register */ - __IOM uint32_t DEMCR; /*!< Offset: 0x00C (R/W) Debug Exception and Monitor Control Register */ -} CoreDebug_Type; - -/* Debug Halting Control and Status Register Definitions */ -#define CoreDebug_DHCSR_DBGKEY_Pos 16U /*!< CoreDebug DHCSR: DBGKEY Position */ -#define CoreDebug_DHCSR_DBGKEY_Msk (0xFFFFUL << CoreDebug_DHCSR_DBGKEY_Pos) /*!< CoreDebug DHCSR: DBGKEY Mask */ - -#define CoreDebug_DHCSR_S_RESET_ST_Pos 25U /*!< CoreDebug DHCSR: S_RESET_ST Position */ -#define CoreDebug_DHCSR_S_RESET_ST_Msk (1UL << CoreDebug_DHCSR_S_RESET_ST_Pos) /*!< CoreDebug DHCSR: S_RESET_ST Mask */ - -#define CoreDebug_DHCSR_S_RETIRE_ST_Pos 24U /*!< CoreDebug DHCSR: S_RETIRE_ST Position */ -#define CoreDebug_DHCSR_S_RETIRE_ST_Msk (1UL << CoreDebug_DHCSR_S_RETIRE_ST_Pos) /*!< CoreDebug DHCSR: S_RETIRE_ST Mask */ - -#define CoreDebug_DHCSR_S_LOCKUP_Pos 19U /*!< CoreDebug DHCSR: S_LOCKUP Position */ -#define CoreDebug_DHCSR_S_LOCKUP_Msk (1UL << CoreDebug_DHCSR_S_LOCKUP_Pos) /*!< CoreDebug DHCSR: S_LOCKUP Mask */ - -#define CoreDebug_DHCSR_S_SLEEP_Pos 18U /*!< CoreDebug DHCSR: S_SLEEP Position */ -#define CoreDebug_DHCSR_S_SLEEP_Msk (1UL << CoreDebug_DHCSR_S_SLEEP_Pos) /*!< CoreDebug DHCSR: S_SLEEP Mask */ - -#define CoreDebug_DHCSR_S_HALT_Pos 17U /*!< CoreDebug DHCSR: S_HALT Position */ -#define CoreDebug_DHCSR_S_HALT_Msk (1UL << CoreDebug_DHCSR_S_HALT_Pos) /*!< CoreDebug DHCSR: S_HALT Mask */ - -#define CoreDebug_DHCSR_S_REGRDY_Pos 16U /*!< CoreDebug DHCSR: S_REGRDY Position */ -#define CoreDebug_DHCSR_S_REGRDY_Msk (1UL << CoreDebug_DHCSR_S_REGRDY_Pos) /*!< CoreDebug DHCSR: S_REGRDY Mask */ - -#define CoreDebug_DHCSR_C_SNAPSTALL_Pos 5U /*!< CoreDebug DHCSR: C_SNAPSTALL Position */ -#define CoreDebug_DHCSR_C_SNAPSTALL_Msk (1UL << CoreDebug_DHCSR_C_SNAPSTALL_Pos) /*!< CoreDebug DHCSR: C_SNAPSTALL Mask */ - -#define CoreDebug_DHCSR_C_MASKINTS_Pos 3U /*!< CoreDebug DHCSR: C_MASKINTS Position */ -#define CoreDebug_DHCSR_C_MASKINTS_Msk (1UL << CoreDebug_DHCSR_C_MASKINTS_Pos) /*!< CoreDebug DHCSR: C_MASKINTS Mask */ - -#define CoreDebug_DHCSR_C_STEP_Pos 2U /*!< CoreDebug DHCSR: C_STEP Position */ -#define CoreDebug_DHCSR_C_STEP_Msk (1UL << CoreDebug_DHCSR_C_STEP_Pos) /*!< CoreDebug DHCSR: C_STEP Mask */ - -#define CoreDebug_DHCSR_C_HALT_Pos 1U /*!< CoreDebug DHCSR: C_HALT Position */ -#define CoreDebug_DHCSR_C_HALT_Msk (1UL << CoreDebug_DHCSR_C_HALT_Pos) /*!< CoreDebug DHCSR: C_HALT Mask */ - -#define CoreDebug_DHCSR_C_DEBUGEN_Pos 0U /*!< CoreDebug DHCSR: C_DEBUGEN Position */ -#define CoreDebug_DHCSR_C_DEBUGEN_Msk (1UL /*<< CoreDebug_DHCSR_C_DEBUGEN_Pos*/) /*!< CoreDebug DHCSR: C_DEBUGEN Mask */ - -/* Debug Core Register Selector Register Definitions */ -#define CoreDebug_DCRSR_REGWnR_Pos 16U /*!< CoreDebug DCRSR: REGWnR Position */ -#define CoreDebug_DCRSR_REGWnR_Msk (1UL << CoreDebug_DCRSR_REGWnR_Pos) /*!< CoreDebug DCRSR: REGWnR Mask */ - -#define CoreDebug_DCRSR_REGSEL_Pos 0U /*!< CoreDebug DCRSR: REGSEL Position */ -#define CoreDebug_DCRSR_REGSEL_Msk (0x1FUL /*<< CoreDebug_DCRSR_REGSEL_Pos*/) /*!< CoreDebug DCRSR: REGSEL Mask */ - -/* Debug Exception and Monitor Control Register Definitions */ -#define CoreDebug_DEMCR_TRCENA_Pos 24U /*!< CoreDebug DEMCR: TRCENA Position */ -#define CoreDebug_DEMCR_TRCENA_Msk (1UL << CoreDebug_DEMCR_TRCENA_Pos) /*!< CoreDebug DEMCR: TRCENA Mask */ - -#define CoreDebug_DEMCR_MON_REQ_Pos 19U /*!< CoreDebug DEMCR: MON_REQ Position */ -#define CoreDebug_DEMCR_MON_REQ_Msk (1UL << CoreDebug_DEMCR_MON_REQ_Pos) /*!< CoreDebug DEMCR: MON_REQ Mask */ - -#define CoreDebug_DEMCR_MON_STEP_Pos 18U /*!< CoreDebug DEMCR: MON_STEP Position */ -#define CoreDebug_DEMCR_MON_STEP_Msk (1UL << CoreDebug_DEMCR_MON_STEP_Pos) /*!< CoreDebug DEMCR: MON_STEP Mask */ - -#define CoreDebug_DEMCR_MON_PEND_Pos 17U /*!< CoreDebug DEMCR: MON_PEND Position */ -#define CoreDebug_DEMCR_MON_PEND_Msk (1UL << CoreDebug_DEMCR_MON_PEND_Pos) /*!< CoreDebug DEMCR: MON_PEND Mask */ - -#define CoreDebug_DEMCR_MON_EN_Pos 16U /*!< CoreDebug DEMCR: MON_EN Position */ -#define CoreDebug_DEMCR_MON_EN_Msk (1UL << CoreDebug_DEMCR_MON_EN_Pos) /*!< CoreDebug DEMCR: MON_EN Mask */ - -#define CoreDebug_DEMCR_VC_HARDERR_Pos 10U /*!< CoreDebug DEMCR: VC_HARDERR Position */ -#define CoreDebug_DEMCR_VC_HARDERR_Msk (1UL << CoreDebug_DEMCR_VC_HARDERR_Pos) /*!< CoreDebug DEMCR: VC_HARDERR Mask */ - -#define CoreDebug_DEMCR_VC_INTERR_Pos 9U /*!< CoreDebug DEMCR: VC_INTERR Position */ -#define CoreDebug_DEMCR_VC_INTERR_Msk (1UL << CoreDebug_DEMCR_VC_INTERR_Pos) /*!< CoreDebug DEMCR: VC_INTERR Mask */ - -#define CoreDebug_DEMCR_VC_BUSERR_Pos 8U /*!< CoreDebug DEMCR: VC_BUSERR Position */ -#define CoreDebug_DEMCR_VC_BUSERR_Msk (1UL << CoreDebug_DEMCR_VC_BUSERR_Pos) /*!< CoreDebug DEMCR: VC_BUSERR Mask */ - -#define CoreDebug_DEMCR_VC_STATERR_Pos 7U /*!< CoreDebug DEMCR: VC_STATERR Position */ -#define CoreDebug_DEMCR_VC_STATERR_Msk (1UL << CoreDebug_DEMCR_VC_STATERR_Pos) /*!< CoreDebug DEMCR: VC_STATERR Mask */ - -#define CoreDebug_DEMCR_VC_CHKERR_Pos 6U /*!< CoreDebug DEMCR: VC_CHKERR Position */ -#define CoreDebug_DEMCR_VC_CHKERR_Msk (1UL << CoreDebug_DEMCR_VC_CHKERR_Pos) /*!< CoreDebug DEMCR: VC_CHKERR Mask */ - -#define CoreDebug_DEMCR_VC_NOCPERR_Pos 5U /*!< CoreDebug DEMCR: VC_NOCPERR Position */ -#define CoreDebug_DEMCR_VC_NOCPERR_Msk (1UL << CoreDebug_DEMCR_VC_NOCPERR_Pos) /*!< CoreDebug DEMCR: VC_NOCPERR Mask */ - -#define CoreDebug_DEMCR_VC_MMERR_Pos 4U /*!< CoreDebug DEMCR: VC_MMERR Position */ -#define CoreDebug_DEMCR_VC_MMERR_Msk (1UL << CoreDebug_DEMCR_VC_MMERR_Pos) /*!< CoreDebug DEMCR: VC_MMERR Mask */ - -#define CoreDebug_DEMCR_VC_CORERESET_Pos 0U /*!< CoreDebug DEMCR: VC_CORERESET Position */ -#define CoreDebug_DEMCR_VC_CORERESET_Msk (1UL /*<< CoreDebug_DEMCR_VC_CORERESET_Pos*/) /*!< CoreDebug DEMCR: VC_CORERESET Mask */ - -/*@} end of group CMSIS_CoreDebug */ - - -/** - \ingroup CMSIS_core_register - \defgroup CMSIS_core_bitfield Core register bit field macros - \brief Macros for use with bit field definitions (xxx_Pos, xxx_Msk). - @{ - */ - -/** - \brief Mask and shift a bit field value for use in a register bit range. - \param[in] field Name of the register bit field. - \param[in] value Value of the bit field. This parameter is interpreted as an uint32_t type. - \return Masked and shifted value. -*/ -#define _VAL2FLD(field, value) (((uint32_t)(value) << field ## _Pos) & field ## _Msk) - -/** - \brief Mask and shift a register value to extract a bit filed value. - \param[in] field Name of the register bit field. - \param[in] value Value of register. This parameter is interpreted as an uint32_t type. - \return Masked and shifted bit field value. -*/ -#define _FLD2VAL(field, value) (((uint32_t)(value) & field ## _Msk) >> field ## _Pos) - -/*@} end of group CMSIS_core_bitfield */ - - -/** - \ingroup CMSIS_core_register - \defgroup CMSIS_core_base Core Definitions - \brief Definitions for base addresses, unions, and structures. - @{ - */ - -/* Memory mapping of Core Hardware */ -#define SCS_BASE (0xE000E000UL) /*!< System Control Space Base Address */ -#define ITM_BASE (0xE0000000UL) /*!< ITM Base Address */ -#define DWT_BASE (0xE0001000UL) /*!< DWT Base Address */ -#define TPI_BASE (0xE0040000UL) /*!< TPI Base Address */ -#define CoreDebug_BASE (0xE000EDF0UL) /*!< Core Debug Base Address */ -#define SysTick_BASE (SCS_BASE + 0x0010UL) /*!< SysTick Base Address */ -#define NVIC_BASE (SCS_BASE + 0x0100UL) /*!< NVIC Base Address */ -#define SCB_BASE (SCS_BASE + 0x0D00UL) /*!< System Control Block Base Address */ - -#define SCnSCB ((SCnSCB_Type *) SCS_BASE ) /*!< System control Register not in SCB */ -#define SCB ((SCB_Type *) SCB_BASE ) /*!< SCB configuration struct */ -#define SysTick ((SysTick_Type *) SysTick_BASE ) /*!< SysTick configuration struct */ -#define NVIC ((NVIC_Type *) NVIC_BASE ) /*!< NVIC configuration struct */ -#define ITM ((ITM_Type *) ITM_BASE ) /*!< ITM configuration struct */ -#define DWT ((DWT_Type *) DWT_BASE ) /*!< DWT configuration struct */ -#define TPI ((TPI_Type *) TPI_BASE ) /*!< TPI configuration struct */ -#define CoreDebug ((CoreDebug_Type *) CoreDebug_BASE) /*!< Core Debug configuration struct */ - -#if defined (__MPU_PRESENT) && (__MPU_PRESENT == 1U) - #define MPU_BASE (SCS_BASE + 0x0D90UL) /*!< Memory Protection Unit */ - #define MPU ((MPU_Type *) MPU_BASE ) /*!< Memory Protection Unit */ -#endif - -#define FPU_BASE (SCS_BASE + 0x0F30UL) /*!< Floating Point Unit */ -#define FPU ((FPU_Type *) FPU_BASE ) /*!< Floating Point Unit */ - -/*@} */ - - - -/******************************************************************************* - * Hardware Abstraction Layer - Core Function Interface contains: - - Core NVIC Functions - - Core SysTick Functions - - Core Debug Functions - - Core Register Access Functions - ******************************************************************************/ -/** - \defgroup CMSIS_Core_FunctionInterface Functions and Instructions Reference -*/ - - - -/* ########################## NVIC functions #################################### */ -/** - \ingroup CMSIS_Core_FunctionInterface - \defgroup CMSIS_Core_NVICFunctions NVIC Functions - \brief Functions that manage interrupts and exceptions via the NVIC. - @{ - */ - -#ifdef CMSIS_NVIC_VIRTUAL - #ifndef CMSIS_NVIC_VIRTUAL_HEADER_FILE - #define CMSIS_NVIC_VIRTUAL_HEADER_FILE "cmsis_nvic_virtual.h" - #endif - #include CMSIS_NVIC_VIRTUAL_HEADER_FILE -#else - #define NVIC_SetPriorityGrouping __NVIC_SetPriorityGrouping - #define NVIC_GetPriorityGrouping __NVIC_GetPriorityGrouping - #define NVIC_EnableIRQ __NVIC_EnableIRQ - #define NVIC_GetEnableIRQ __NVIC_GetEnableIRQ - #define NVIC_DisableIRQ __NVIC_DisableIRQ - #define NVIC_GetPendingIRQ __NVIC_GetPendingIRQ - #define NVIC_SetPendingIRQ __NVIC_SetPendingIRQ - #define NVIC_ClearPendingIRQ __NVIC_ClearPendingIRQ - #define NVIC_GetActive __NVIC_GetActive - #define NVIC_SetPriority __NVIC_SetPriority - #define NVIC_GetPriority __NVIC_GetPriority - #define NVIC_SystemReset __NVIC_SystemReset -#endif /* CMSIS_NVIC_VIRTUAL */ - -#ifdef CMSIS_VECTAB_VIRTUAL - #ifndef CMSIS_VECTAB_VIRTUAL_HEADER_FILE - #define CMSIS_VECTAB_VIRTUAL_HEADER_FILE "cmsis_vectab_virtual.h" - #endif - #include CMSIS_VECTAB_VIRTUAL_HEADER_FILE -#else - #define NVIC_SetVector __NVIC_SetVector - #define NVIC_GetVector __NVIC_GetVector -#endif /* (CMSIS_VECTAB_VIRTUAL) */ - -#define NVIC_USER_IRQ_OFFSET 16 - - -/* The following EXC_RETURN values are saved the LR on exception entry */ -#define EXC_RETURN_HANDLER (0xFFFFFFF1UL) /* return to Handler mode, uses MSP after return */ -#define EXC_RETURN_THREAD_MSP (0xFFFFFFF9UL) /* return to Thread mode, uses MSP after return */ -#define EXC_RETURN_THREAD_PSP (0xFFFFFFFDUL) /* return to Thread mode, uses PSP after return */ -#define EXC_RETURN_HANDLER_FPU (0xFFFFFFE1UL) /* return to Handler mode, uses MSP after return, restore floating-point state */ -#define EXC_RETURN_THREAD_MSP_FPU (0xFFFFFFE9UL) /* return to Thread mode, uses MSP after return, restore floating-point state */ -#define EXC_RETURN_THREAD_PSP_FPU (0xFFFFFFEDUL) /* return to Thread mode, uses PSP after return, restore floating-point state */ - - -/** - \brief Set Priority Grouping - \details Sets the priority grouping field using the required unlock sequence. - The parameter PriorityGroup is assigned to the field SCB->AIRCR [10:8] PRIGROUP field. - Only values from 0..7 are used. - In case of a conflict between priority grouping and available - priority bits (__NVIC_PRIO_BITS), the smallest possible priority group is set. - \param [in] PriorityGroup Priority grouping field. - */ -__STATIC_INLINE void __NVIC_SetPriorityGrouping(uint32_t PriorityGroup) -{ - uint32_t reg_value; - uint32_t PriorityGroupTmp = (PriorityGroup & (uint32_t)0x07UL); /* only values 0..7 are used */ - - reg_value = SCB->AIRCR; /* read old register configuration */ - reg_value &= ~((uint32_t)(SCB_AIRCR_VECTKEY_Msk | SCB_AIRCR_PRIGROUP_Msk)); /* clear bits to change */ - reg_value = (reg_value | - ((uint32_t)0x5FAUL << SCB_AIRCR_VECTKEY_Pos) | - (PriorityGroupTmp << SCB_AIRCR_PRIGROUP_Pos) ); /* Insert write key and priority group */ - SCB->AIRCR = reg_value; -} - - -/** - \brief Get Priority Grouping - \details Reads the priority grouping field from the NVIC Interrupt Controller. - \return Priority grouping field (SCB->AIRCR [10:8] PRIGROUP field). - */ -__STATIC_INLINE uint32_t __NVIC_GetPriorityGrouping(void) -{ - return ((uint32_t)((SCB->AIRCR & SCB_AIRCR_PRIGROUP_Msk) >> SCB_AIRCR_PRIGROUP_Pos)); -} - - -/** - \brief Enable Interrupt - \details Enables a device specific interrupt in the NVIC interrupt controller. - \param [in] IRQn Device specific interrupt number. - \note IRQn must not be negative. - */ -__STATIC_INLINE void __NVIC_EnableIRQ(IRQn_Type IRQn) -{ - if ((int32_t)(IRQn) >= 0) - { - NVIC->ISER[(((uint32_t)IRQn) >> 5UL)] = (uint32_t)(1UL << (((uint32_t)IRQn) & 0x1FUL)); - } -} - - -/** - \brief Get Interrupt Enable status - \details Returns a device specific interrupt enable status from the NVIC interrupt controller. - \param [in] IRQn Device specific interrupt number. - \return 0 Interrupt is not enabled. - \return 1 Interrupt is enabled. - \note IRQn must not be negative. - */ -__STATIC_INLINE uint32_t __NVIC_GetEnableIRQ(IRQn_Type IRQn) -{ - if ((int32_t)(IRQn) >= 0) - { - return((uint32_t)(((NVIC->ISER[(((uint32_t)IRQn) >> 5UL)] & (1UL << (((uint32_t)IRQn) & 0x1FUL))) != 0UL) ? 1UL : 0UL)); - } - else - { - return(0U); - } -} - - -/** - \brief Disable Interrupt - \details Disables a device specific interrupt in the NVIC interrupt controller. - \param [in] IRQn Device specific interrupt number. - \note IRQn must not be negative. - */ -__STATIC_INLINE void __NVIC_DisableIRQ(IRQn_Type IRQn) -{ - if ((int32_t)(IRQn) >= 0) - { - NVIC->ICER[(((uint32_t)IRQn) >> 5UL)] = (uint32_t)(1UL << (((uint32_t)IRQn) & 0x1FUL)); - __DSB(); - __ISB(); - } -} - - -/** - \brief Get Pending Interrupt - \details Reads the NVIC pending register and returns the pending bit for the specified device specific interrupt. - \param [in] IRQn Device specific interrupt number. - \return 0 Interrupt status is not pending. - \return 1 Interrupt status is pending. - \note IRQn must not be negative. - */ -__STATIC_INLINE uint32_t __NVIC_GetPendingIRQ(IRQn_Type IRQn) -{ - if ((int32_t)(IRQn) >= 0) - { - return((uint32_t)(((NVIC->ISPR[(((uint32_t)IRQn) >> 5UL)] & (1UL << (((uint32_t)IRQn) & 0x1FUL))) != 0UL) ? 1UL : 0UL)); - } - else - { - return(0U); - } -} - - -/** - \brief Set Pending Interrupt - \details Sets the pending bit of a device specific interrupt in the NVIC pending register. - \param [in] IRQn Device specific interrupt number. - \note IRQn must not be negative. - */ -__STATIC_INLINE void __NVIC_SetPendingIRQ(IRQn_Type IRQn) -{ - if ((int32_t)(IRQn) >= 0) - { - NVIC->ISPR[(((uint32_t)IRQn) >> 5UL)] = (uint32_t)(1UL << (((uint32_t)IRQn) & 0x1FUL)); - } -} - - -/** - \brief Clear Pending Interrupt - \details Clears the pending bit of a device specific interrupt in the NVIC pending register. - \param [in] IRQn Device specific interrupt number. - \note IRQn must not be negative. - */ -__STATIC_INLINE void __NVIC_ClearPendingIRQ(IRQn_Type IRQn) -{ - if ((int32_t)(IRQn) >= 0) - { - NVIC->ICPR[(((uint32_t)IRQn) >> 5UL)] = (uint32_t)(1UL << (((uint32_t)IRQn) & 0x1FUL)); - } -} - - -/** - \brief Get Active Interrupt - \details Reads the active register in the NVIC and returns the active bit for the device specific interrupt. - \param [in] IRQn Device specific interrupt number. - \return 0 Interrupt status is not active. - \return 1 Interrupt status is active. - \note IRQn must not be negative. - */ -__STATIC_INLINE uint32_t __NVIC_GetActive(IRQn_Type IRQn) -{ - if ((int32_t)(IRQn) >= 0) - { - return((uint32_t)(((NVIC->IABR[(((uint32_t)IRQn) >> 5UL)] & (1UL << (((uint32_t)IRQn) & 0x1FUL))) != 0UL) ? 1UL : 0UL)); - } - else - { - return(0U); - } -} - - -/** - \brief Set Interrupt Priority - \details Sets the priority of a device specific interrupt or a processor exception. - The interrupt number can be positive to specify a device specific interrupt, - or negative to specify a processor exception. - \param [in] IRQn Interrupt number. - \param [in] priority Priority to set. - \note The priority cannot be set for every processor exception. - */ -__STATIC_INLINE void __NVIC_SetPriority(IRQn_Type IRQn, uint32_t priority) -{ - if ((int32_t)(IRQn) >= 0) - { - NVIC->IP[((uint32_t)IRQn)] = (uint8_t)((priority << (8U - __NVIC_PRIO_BITS)) & (uint32_t)0xFFUL); - } - else - { - SCB->SHPR[(((uint32_t)IRQn) & 0xFUL)-4UL] = (uint8_t)((priority << (8U - __NVIC_PRIO_BITS)) & (uint32_t)0xFFUL); - } -} - - -/** - \brief Get Interrupt Priority - \details Reads the priority of a device specific interrupt or a processor exception. - The interrupt number can be positive to specify a device specific interrupt, - or negative to specify a processor exception. - \param [in] IRQn Interrupt number. - \return Interrupt Priority. - Value is aligned automatically to the implemented priority bits of the microcontroller. - */ -__STATIC_INLINE uint32_t __NVIC_GetPriority(IRQn_Type IRQn) -{ - - if ((int32_t)(IRQn) >= 0) - { - return(((uint32_t)NVIC->IP[((uint32_t)IRQn)] >> (8U - __NVIC_PRIO_BITS))); - } - else - { - return(((uint32_t)SCB->SHPR[(((uint32_t)IRQn) & 0xFUL)-4UL] >> (8U - __NVIC_PRIO_BITS))); - } -} - - -/** - \brief Encode Priority - \details Encodes the priority for an interrupt with the given priority group, - preemptive priority value, and subpriority value. - In case of a conflict between priority grouping and available - priority bits (__NVIC_PRIO_BITS), the smallest possible priority group is set. - \param [in] PriorityGroup Used priority group. - \param [in] PreemptPriority Preemptive priority value (starting from 0). - \param [in] SubPriority Subpriority value (starting from 0). - \return Encoded priority. Value can be used in the function \ref NVIC_SetPriority(). - */ -__STATIC_INLINE uint32_t NVIC_EncodePriority (uint32_t PriorityGroup, uint32_t PreemptPriority, uint32_t SubPriority) -{ - uint32_t PriorityGroupTmp = (PriorityGroup & (uint32_t)0x07UL); /* only values 0..7 are used */ - uint32_t PreemptPriorityBits; - uint32_t SubPriorityBits; - - PreemptPriorityBits = ((7UL - PriorityGroupTmp) > (uint32_t)(__NVIC_PRIO_BITS)) ? (uint32_t)(__NVIC_PRIO_BITS) : (uint32_t)(7UL - PriorityGroupTmp); - SubPriorityBits = ((PriorityGroupTmp + (uint32_t)(__NVIC_PRIO_BITS)) < (uint32_t)7UL) ? (uint32_t)0UL : (uint32_t)((PriorityGroupTmp - 7UL) + (uint32_t)(__NVIC_PRIO_BITS)); - - return ( - ((PreemptPriority & (uint32_t)((1UL << (PreemptPriorityBits)) - 1UL)) << SubPriorityBits) | - ((SubPriority & (uint32_t)((1UL << (SubPriorityBits )) - 1UL))) - ); -} - - -/** - \brief Decode Priority - \details Decodes an interrupt priority value with a given priority group to - preemptive priority value and subpriority value. - In case of a conflict between priority grouping and available - priority bits (__NVIC_PRIO_BITS) the smallest possible priority group is set. - \param [in] Priority Priority value, which can be retrieved with the function \ref NVIC_GetPriority(). - \param [in] PriorityGroup Used priority group. - \param [out] pPreemptPriority Preemptive priority value (starting from 0). - \param [out] pSubPriority Subpriority value (starting from 0). - */ -__STATIC_INLINE void NVIC_DecodePriority (uint32_t Priority, uint32_t PriorityGroup, uint32_t* const pPreemptPriority, uint32_t* const pSubPriority) -{ - uint32_t PriorityGroupTmp = (PriorityGroup & (uint32_t)0x07UL); /* only values 0..7 are used */ - uint32_t PreemptPriorityBits; - uint32_t SubPriorityBits; - - PreemptPriorityBits = ((7UL - PriorityGroupTmp) > (uint32_t)(__NVIC_PRIO_BITS)) ? (uint32_t)(__NVIC_PRIO_BITS) : (uint32_t)(7UL - PriorityGroupTmp); - SubPriorityBits = ((PriorityGroupTmp + (uint32_t)(__NVIC_PRIO_BITS)) < (uint32_t)7UL) ? (uint32_t)0UL : (uint32_t)((PriorityGroupTmp - 7UL) + (uint32_t)(__NVIC_PRIO_BITS)); - - *pPreemptPriority = (Priority >> SubPriorityBits) & (uint32_t)((1UL << (PreemptPriorityBits)) - 1UL); - *pSubPriority = (Priority ) & (uint32_t)((1UL << (SubPriorityBits )) - 1UL); -} - - -/** - \brief Set Interrupt Vector - \details Sets an interrupt vector in SRAM based interrupt vector table. - The interrupt number can be positive to specify a device specific interrupt, - or negative to specify a processor exception. - VTOR must been relocated to SRAM before. - \param [in] IRQn Interrupt number - \param [in] vector Address of interrupt handler function - */ -__STATIC_INLINE void __NVIC_SetVector(IRQn_Type IRQn, uint32_t vector) -{ - uint32_t *vectors = (uint32_t *)SCB->VTOR; - vectors[(int32_t)IRQn + NVIC_USER_IRQ_OFFSET] = vector; -} - - -/** - \brief Get Interrupt Vector - \details Reads an interrupt vector from interrupt vector table. - The interrupt number can be positive to specify a device specific interrupt, - or negative to specify a processor exception. - \param [in] IRQn Interrupt number. - \return Address of interrupt handler function - */ -__STATIC_INLINE uint32_t __NVIC_GetVector(IRQn_Type IRQn) -{ - uint32_t *vectors = (uint32_t *)SCB->VTOR; - return vectors[(int32_t)IRQn + NVIC_USER_IRQ_OFFSET]; -} - - -/** - \brief System Reset - \details Initiates a system reset request to reset the MCU. - */ -__NO_RETURN __STATIC_INLINE void __NVIC_SystemReset(void) -{ - __DSB(); /* Ensure all outstanding memory accesses included - buffered write are completed before reset */ - SCB->AIRCR = (uint32_t)((0x5FAUL << SCB_AIRCR_VECTKEY_Pos) | - (SCB->AIRCR & SCB_AIRCR_PRIGROUP_Msk) | - SCB_AIRCR_SYSRESETREQ_Msk ); /* Keep priority group unchanged */ - __DSB(); /* Ensure completion of memory access */ - - for(;;) /* wait until reset */ - { - __NOP(); - } -} - -/*@} end of CMSIS_Core_NVICFunctions */ - -/* ########################## MPU functions #################################### */ - -#if defined (__MPU_PRESENT) && (__MPU_PRESENT == 1U) - -#include "mpu_armv7.h" - -#endif - -/* ########################## FPU functions #################################### */ -/** - \ingroup CMSIS_Core_FunctionInterface - \defgroup CMSIS_Core_FpuFunctions FPU Functions - \brief Function that provides FPU type. - @{ - */ - -/** - \brief get FPU type - \details returns the FPU type - \returns - - \b 0: No FPU - - \b 1: Single precision FPU - - \b 2: Double + Single precision FPU - */ -__STATIC_INLINE uint32_t SCB_GetFPUType(void) -{ - uint32_t mvfr0; - - mvfr0 = SCB->MVFR0; - if ((mvfr0 & (FPU_MVFR0_Single_precision_Msk | FPU_MVFR0_Double_precision_Msk)) == 0x220U) - { - return 2U; /* Double + Single precision FPU */ - } - else if ((mvfr0 & (FPU_MVFR0_Single_precision_Msk | FPU_MVFR0_Double_precision_Msk)) == 0x020U) - { - return 1U; /* Single precision FPU */ - } - else - { - return 0U; /* No FPU */ - } -} - - -/*@} end of CMSIS_Core_FpuFunctions */ - - - -/* ########################## Cache functions #################################### */ -/** - \ingroup CMSIS_Core_FunctionInterface - \defgroup CMSIS_Core_CacheFunctions Cache Functions - \brief Functions that configure Instruction and Data cache. - @{ - */ - -/* Cache Size ID Register Macros */ -#define CCSIDR_WAYS(x) (((x) & SCB_CCSIDR_ASSOCIATIVITY_Msk) >> SCB_CCSIDR_ASSOCIATIVITY_Pos) -#define CCSIDR_SETS(x) (((x) & SCB_CCSIDR_NUMSETS_Msk ) >> SCB_CCSIDR_NUMSETS_Pos ) - - -/** - \brief Enable I-Cache - \details Turns on I-Cache - */ -__STATIC_INLINE void SCB_EnableICache (void) -{ - #if defined (__ICACHE_PRESENT) && (__ICACHE_PRESENT == 1U) - __DSB(); - __ISB(); - SCB->ICIALLU = 0UL; /* invalidate I-Cache */ - __DSB(); - __ISB(); - SCB->CCR |= (uint32_t)SCB_CCR_IC_Msk; /* enable I-Cache */ - __DSB(); - __ISB(); - #endif -} - - -/** - \brief Disable I-Cache - \details Turns off I-Cache - */ -__STATIC_INLINE void SCB_DisableICache (void) -{ - #if defined (__ICACHE_PRESENT) && (__ICACHE_PRESENT == 1U) - __DSB(); - __ISB(); - SCB->CCR &= ~(uint32_t)SCB_CCR_IC_Msk; /* disable I-Cache */ - SCB->ICIALLU = 0UL; /* invalidate I-Cache */ - __DSB(); - __ISB(); - #endif -} - - -/** - \brief Invalidate I-Cache - \details Invalidates I-Cache - */ -__STATIC_INLINE void SCB_InvalidateICache (void) -{ - #if defined (__ICACHE_PRESENT) && (__ICACHE_PRESENT == 1U) - __DSB(); - __ISB(); - SCB->ICIALLU = 0UL; - __DSB(); - __ISB(); - #endif -} - - -/** - \brief Enable D-Cache - \details Turns on D-Cache - */ -__STATIC_INLINE void SCB_EnableDCache (void) -{ - #if defined (__DCACHE_PRESENT) && (__DCACHE_PRESENT == 1U) - uint32_t ccsidr; - uint32_t sets; - uint32_t ways; - - SCB->CSSELR = 0U; /*(0U << 1U) | 0U;*/ /* Level 1 data cache */ - __DSB(); - - ccsidr = SCB->CCSIDR; - - /* invalidate D-Cache */ - sets = (uint32_t)(CCSIDR_SETS(ccsidr)); - do { - ways = (uint32_t)(CCSIDR_WAYS(ccsidr)); - do { - SCB->DCISW = (((sets << SCB_DCISW_SET_Pos) & SCB_DCISW_SET_Msk) | - ((ways << SCB_DCISW_WAY_Pos) & SCB_DCISW_WAY_Msk) ); - #if defined ( __CC_ARM ) - __schedule_barrier(); - #endif - } while (ways-- != 0U); - } while(sets-- != 0U); - __DSB(); - - SCB->CCR |= (uint32_t)SCB_CCR_DC_Msk; /* enable D-Cache */ - - __DSB(); - __ISB(); - #endif -} - - -/** - \brief Disable D-Cache - \details Turns off D-Cache - */ -__STATIC_INLINE void SCB_DisableDCache (void) -{ - #if defined (__DCACHE_PRESENT) && (__DCACHE_PRESENT == 1U) - uint32_t ccsidr; - uint32_t sets; - uint32_t ways; - - SCB->CSSELR = 0U; /*(0U << 1U) | 0U;*/ /* Level 1 data cache */ - __DSB(); - - SCB->CCR &= ~(uint32_t)SCB_CCR_DC_Msk; /* disable D-Cache */ - __DSB(); - - ccsidr = SCB->CCSIDR; - - /* clean & invalidate D-Cache */ - sets = (uint32_t)(CCSIDR_SETS(ccsidr)); - do { - ways = (uint32_t)(CCSIDR_WAYS(ccsidr)); - do { - SCB->DCCISW = (((sets << SCB_DCCISW_SET_Pos) & SCB_DCCISW_SET_Msk) | - ((ways << SCB_DCCISW_WAY_Pos) & SCB_DCCISW_WAY_Msk) ); - #if defined ( __CC_ARM ) - __schedule_barrier(); - #endif - } while (ways-- != 0U); - } while(sets-- != 0U); - - __DSB(); - __ISB(); - #endif -} - - -/** - \brief Invalidate D-Cache - \details Invalidates D-Cache - */ -__STATIC_INLINE void SCB_InvalidateDCache (void) -{ - #if defined (__DCACHE_PRESENT) && (__DCACHE_PRESENT == 1U) - uint32_t ccsidr; - uint32_t sets; - uint32_t ways; - - SCB->CSSELR = 0U; /*(0U << 1U) | 0U;*/ /* Level 1 data cache */ - __DSB(); - - ccsidr = SCB->CCSIDR; - - /* invalidate D-Cache */ - sets = (uint32_t)(CCSIDR_SETS(ccsidr)); - do { - ways = (uint32_t)(CCSIDR_WAYS(ccsidr)); - do { - SCB->DCISW = (((sets << SCB_DCISW_SET_Pos) & SCB_DCISW_SET_Msk) | - ((ways << SCB_DCISW_WAY_Pos) & SCB_DCISW_WAY_Msk) ); - #if defined ( __CC_ARM ) - __schedule_barrier(); - #endif - } while (ways-- != 0U); - } while(sets-- != 0U); - - __DSB(); - __ISB(); - #endif -} - - -/** - \brief Clean D-Cache - \details Cleans D-Cache - */ -__STATIC_INLINE void SCB_CleanDCache (void) -{ - #if defined (__DCACHE_PRESENT) && (__DCACHE_PRESENT == 1U) - uint32_t ccsidr; - uint32_t sets; - uint32_t ways; - - SCB->CSSELR = 0U; /*(0U << 1U) | 0U;*/ /* Level 1 data cache */ - __DSB(); - - ccsidr = SCB->CCSIDR; - - /* clean D-Cache */ - sets = (uint32_t)(CCSIDR_SETS(ccsidr)); - do { - ways = (uint32_t)(CCSIDR_WAYS(ccsidr)); - do { - SCB->DCCSW = (((sets << SCB_DCCSW_SET_Pos) & SCB_DCCSW_SET_Msk) | - ((ways << SCB_DCCSW_WAY_Pos) & SCB_DCCSW_WAY_Msk) ); - #if defined ( __CC_ARM ) - __schedule_barrier(); - #endif - } while (ways-- != 0U); - } while(sets-- != 0U); - - __DSB(); - __ISB(); - #endif -} - - -/** - \brief Clean & Invalidate D-Cache - \details Cleans and Invalidates D-Cache - */ -__STATIC_INLINE void SCB_CleanInvalidateDCache (void) -{ - #if defined (__DCACHE_PRESENT) && (__DCACHE_PRESENT == 1U) - uint32_t ccsidr; - uint32_t sets; - uint32_t ways; - - SCB->CSSELR = 0U; /*(0U << 1U) | 0U;*/ /* Level 1 data cache */ - __DSB(); - - ccsidr = SCB->CCSIDR; - - /* clean & invalidate D-Cache */ - sets = (uint32_t)(CCSIDR_SETS(ccsidr)); - do { - ways = (uint32_t)(CCSIDR_WAYS(ccsidr)); - do { - SCB->DCCISW = (((sets << SCB_DCCISW_SET_Pos) & SCB_DCCISW_SET_Msk) | - ((ways << SCB_DCCISW_WAY_Pos) & SCB_DCCISW_WAY_Msk) ); - #if defined ( __CC_ARM ) - __schedule_barrier(); - #endif - } while (ways-- != 0U); - } while(sets-- != 0U); - - __DSB(); - __ISB(); - #endif -} - - -/** - \brief D-Cache Invalidate by address - \details Invalidates D-Cache for the given address - \param[in] addr address (aligned to 32-byte boundary) - \param[in] dsize size of memory block (in number of bytes) -*/ -__STATIC_INLINE void SCB_InvalidateDCache_by_Addr (uint32_t *addr, int32_t dsize) -{ - #if defined (__DCACHE_PRESENT) && (__DCACHE_PRESENT == 1U) - int32_t op_size = dsize; - uint32_t op_addr = (uint32_t)addr; - int32_t linesize = 32; /* in Cortex-M7 size of cache line is fixed to 8 words (32 bytes) */ - - __DSB(); - - while (op_size > 0) { - SCB->DCIMVAC = op_addr; - op_addr += (uint32_t)linesize; - op_size -= linesize; - } - - __DSB(); - __ISB(); - #endif -} - - -/** - \brief D-Cache Clean by address - \details Cleans D-Cache for the given address - \param[in] addr address (aligned to 32-byte boundary) - \param[in] dsize size of memory block (in number of bytes) -*/ -__STATIC_INLINE void SCB_CleanDCache_by_Addr (uint32_t *addr, int32_t dsize) -{ - #if defined (__DCACHE_PRESENT) && (__DCACHE_PRESENT == 1U) - int32_t op_size = dsize; - uint32_t op_addr = (uint32_t) addr; - int32_t linesize = 32; /* in Cortex-M7 size of cache line is fixed to 8 words (32 bytes) */ - - __DSB(); - - while (op_size > 0) { - SCB->DCCMVAC = op_addr; - op_addr += (uint32_t)linesize; - op_size -= linesize; - } - - __DSB(); - __ISB(); - #endif -} - - -/** - \brief D-Cache Clean and Invalidate by address - \details Cleans and invalidates D_Cache for the given address - \param[in] addr address (aligned to 32-byte boundary) - \param[in] dsize size of memory block (in number of bytes) -*/ -__STATIC_INLINE void SCB_CleanInvalidateDCache_by_Addr (uint32_t *addr, int32_t dsize) -{ - #if defined (__DCACHE_PRESENT) && (__DCACHE_PRESENT == 1U) - int32_t op_size = dsize; - uint32_t op_addr = (uint32_t) addr; - int32_t linesize = 32; /* in Cortex-M7 size of cache line is fixed to 8 words (32 bytes) */ - - __DSB(); - - while (op_size > 0) { - SCB->DCCIMVAC = op_addr; - op_addr += (uint32_t)linesize; - op_size -= linesize; - } - - __DSB(); - __ISB(); - #endif -} - - -/*@} end of CMSIS_Core_CacheFunctions */ - - - -/* ################################## SysTick function ############################################ */ -/** - \ingroup CMSIS_Core_FunctionInterface - \defgroup CMSIS_Core_SysTickFunctions SysTick Functions - \brief Functions that configure the System. - @{ - */ - -#if defined (__Vendor_SysTickConfig) && (__Vendor_SysTickConfig == 0U) - -/** - \brief System Tick Configuration - \details Initializes the System Timer and its interrupt, and starts the System Tick Timer. - Counter is in free running mode to generate periodic interrupts. - \param [in] ticks Number of ticks between two interrupts. - \return 0 Function succeeded. - \return 1 Function failed. - \note When the variable __Vendor_SysTickConfig is set to 1, then the - function SysTick_Config is not included. In this case, the file device.h - must contain a vendor-specific implementation of this function. - */ -__STATIC_INLINE uint32_t SysTick_Config(uint32_t ticks) -{ - if ((ticks - 1UL) > SysTick_LOAD_RELOAD_Msk) - { - return (1UL); /* Reload value impossible */ - } - - SysTick->LOAD = (uint32_t)(ticks - 1UL); /* set reload register */ - NVIC_SetPriority (SysTick_IRQn, (1UL << __NVIC_PRIO_BITS) - 1UL); /* set Priority for Systick Interrupt */ - SysTick->VAL = 0UL; /* Load the SysTick Counter Value */ - SysTick->CTRL = SysTick_CTRL_CLKSOURCE_Msk | - SysTick_CTRL_TICKINT_Msk | - SysTick_CTRL_ENABLE_Msk; /* Enable SysTick IRQ and SysTick Timer */ - return (0UL); /* Function successful */ -} - -#endif - -/*@} end of CMSIS_Core_SysTickFunctions */ - - - -/* ##################################### Debug In/Output function ########################################### */ -/** - \ingroup CMSIS_Core_FunctionInterface - \defgroup CMSIS_core_DebugFunctions ITM Functions - \brief Functions that access the ITM debug interface. - @{ - */ - -extern volatile int32_t ITM_RxBuffer; /*!< External variable to receive characters. */ -#define ITM_RXBUFFER_EMPTY ((int32_t)0x5AA55AA5U) /*!< Value identifying \ref ITM_RxBuffer is ready for next character. */ - - -/** - \brief ITM Send Character - \details Transmits a character via the ITM channel 0, and - \li Just returns when no debugger is connected that has booked the output. - \li Is blocking when a debugger is connected, but the previous character sent has not been transmitted. - \param [in] ch Character to transmit. - \returns Character to transmit. - */ -__STATIC_INLINE uint32_t ITM_SendChar (uint32_t ch) -{ - if (((ITM->TCR & ITM_TCR_ITMENA_Msk) != 0UL) && /* ITM enabled */ - ((ITM->TER & 1UL ) != 0UL) ) /* ITM Port #0 enabled */ - { - while (ITM->PORT[0U].u32 == 0UL) - { - __NOP(); - } - ITM->PORT[0U].u8 = (uint8_t)ch; - } - return (ch); -} - - -/** - \brief ITM Receive Character - \details Inputs a character via the external variable \ref ITM_RxBuffer. - \return Received character. - \return -1 No character pending. - */ -__STATIC_INLINE int32_t ITM_ReceiveChar (void) -{ - int32_t ch = -1; /* no character available */ - - if (ITM_RxBuffer != ITM_RXBUFFER_EMPTY) - { - ch = ITM_RxBuffer; - ITM_RxBuffer = ITM_RXBUFFER_EMPTY; /* ready for next character */ - } - - return (ch); -} - - -/** - \brief ITM Check Character - \details Checks whether a character is pending for reading in the variable \ref ITM_RxBuffer. - \return 0 No character available. - \return 1 Character available. - */ -__STATIC_INLINE int32_t ITM_CheckChar (void) -{ - - if (ITM_RxBuffer == ITM_RXBUFFER_EMPTY) - { - return (0); /* no character available */ - } - else - { - return (1); /* character available */ - } -} - -/*@} end of CMSIS_core_DebugFunctions */ - - - - -#ifdef __cplusplus -} -#endif - -#endif /* __CORE_CM7_H_DEPENDANT */ - -#endif /* __CMSIS_GENERIC */ diff --git a/test_dma/Drivers/CMSIS/Include/core_sc000.h b/test_dma/Drivers/CMSIS/Include/core_sc000.h deleted file mode 100644 index 9086c64..0000000 --- a/test_dma/Drivers/CMSIS/Include/core_sc000.h +++ /dev/null @@ -1,1022 +0,0 @@ -/**************************************************************************//** - * @file core_sc000.h - * @brief CMSIS SC000 Core Peripheral Access Layer Header File - * @version V5.0.5 - * @date 28. May 2018 - ******************************************************************************/ -/* - * Copyright (c) 2009-2018 Arm Limited. All rights reserved. - * - * SPDX-License-Identifier: Apache-2.0 - * - * Licensed under the Apache License, Version 2.0 (the License); you may - * not use this file except in compliance with the License. - * You may obtain a copy of the License at - * - * www.apache.org/licenses/LICENSE-2.0 - * - * Unless required by applicable law or agreed to in writing, software - * distributed under the License is distributed on an AS IS BASIS, WITHOUT - * WARRANTIES OR CONDITIONS OF ANY KIND, either express or implied. - * See the License for the specific language governing permissions and - * limitations under the License. - */ - -#if defined ( __ICCARM__ ) - #pragma system_include /* treat file as system include file for MISRA check */ -#elif defined (__clang__) - #pragma clang system_header /* treat file as system include file */ -#endif - -#ifndef __CORE_SC000_H_GENERIC -#define __CORE_SC000_H_GENERIC - -#include - -#ifdef __cplusplus - extern "C" { -#endif - -/** - \page CMSIS_MISRA_Exceptions MISRA-C:2004 Compliance Exceptions - CMSIS violates the following MISRA-C:2004 rules: - - \li Required Rule 8.5, object/function definition in header file.
- Function definitions in header files are used to allow 'inlining'. - - \li Required Rule 18.4, declaration of union type or object of union type: '{...}'.
- Unions are used for effective representation of core registers. - - \li Advisory Rule 19.7, Function-like macro defined.
- Function-like macros are used to allow more efficient code. - */ - - -/******************************************************************************* - * CMSIS definitions - ******************************************************************************/ -/** - \ingroup SC000 - @{ - */ - -#include "cmsis_version.h" - -/* CMSIS SC000 definitions */ -#define __SC000_CMSIS_VERSION_MAIN (__CM_CMSIS_VERSION_MAIN) /*!< \deprecated [31:16] CMSIS HAL main version */ -#define __SC000_CMSIS_VERSION_SUB (__CM_CMSIS_VERSION_SUB) /*!< \deprecated [15:0] CMSIS HAL sub version */ -#define __SC000_CMSIS_VERSION ((__SC000_CMSIS_VERSION_MAIN << 16U) | \ - __SC000_CMSIS_VERSION_SUB ) /*!< \deprecated CMSIS HAL version number */ - -#define __CORTEX_SC (000U) /*!< Cortex secure core */ - -/** __FPU_USED indicates whether an FPU is used or not. - This core does not support an FPU at all -*/ -#define __FPU_USED 0U - -#if defined ( __CC_ARM ) - #if defined __TARGET_FPU_VFP - #error "Compiler generates FPU instructions for a device without an FPU (check __FPU_PRESENT)" - #endif - -#elif defined (__ARMCC_VERSION) && (__ARMCC_VERSION >= 6010050) - #if defined __ARM_PCS_VFP - #error "Compiler generates FPU instructions for a device without an FPU (check __FPU_PRESENT)" - #endif - -#elif defined ( __GNUC__ ) - #if defined (__VFP_FP__) && !defined(__SOFTFP__) - #error "Compiler generates FPU instructions for a device without an FPU (check __FPU_PRESENT)" - #endif - -#elif defined ( __ICCARM__ ) - #if defined __ARMVFP__ - #error "Compiler generates FPU instructions for a device without an FPU (check __FPU_PRESENT)" - #endif - -#elif defined ( __TI_ARM__ ) - #if defined __TI_VFP_SUPPORT__ - #error "Compiler generates FPU instructions for a device without an FPU (check __FPU_PRESENT)" - #endif - -#elif defined ( __TASKING__ ) - #if defined __FPU_VFP__ - #error "Compiler generates FPU instructions for a device without an FPU (check __FPU_PRESENT)" - #endif - -#elif defined ( __CSMC__ ) - #if ( __CSMC__ & 0x400U) - #error "Compiler generates FPU instructions for a device without an FPU (check __FPU_PRESENT)" - #endif - -#endif - -#include "cmsis_compiler.h" /* CMSIS compiler specific defines */ - - -#ifdef __cplusplus -} -#endif - -#endif /* __CORE_SC000_H_GENERIC */ - -#ifndef __CMSIS_GENERIC - -#ifndef __CORE_SC000_H_DEPENDANT -#define __CORE_SC000_H_DEPENDANT - -#ifdef __cplusplus - extern "C" { -#endif - -/* check device defines and use defaults */ -#if defined __CHECK_DEVICE_DEFINES - #ifndef __SC000_REV - #define __SC000_REV 0x0000U - #warning "__SC000_REV not defined in device header file; using default!" - #endif - - #ifndef __MPU_PRESENT - #define __MPU_PRESENT 0U - #warning "__MPU_PRESENT not defined in device header file; using default!" - #endif - - #ifndef __NVIC_PRIO_BITS - #define __NVIC_PRIO_BITS 2U - #warning "__NVIC_PRIO_BITS not defined in device header file; using default!" - #endif - - #ifndef __Vendor_SysTickConfig - #define __Vendor_SysTickConfig 0U - #warning "__Vendor_SysTickConfig not defined in device header file; using default!" - #endif -#endif - -/* IO definitions (access restrictions to peripheral registers) */ -/** - \defgroup CMSIS_glob_defs CMSIS Global Defines - - IO Type Qualifiers are used - \li to specify the access to peripheral variables. - \li for automatic generation of peripheral register debug information. -*/ -#ifdef __cplusplus - #define __I volatile /*!< Defines 'read only' permissions */ -#else - #define __I volatile const /*!< Defines 'read only' permissions */ -#endif -#define __O volatile /*!< Defines 'write only' permissions */ -#define __IO volatile /*!< Defines 'read / write' permissions */ - -/* following defines should be used for structure members */ -#define __IM volatile const /*! Defines 'read only' structure member permissions */ -#define __OM volatile /*! Defines 'write only' structure member permissions */ -#define __IOM volatile /*! Defines 'read / write' structure member permissions */ - -/*@} end of group SC000 */ - - - -/******************************************************************************* - * Register Abstraction - Core Register contain: - - Core Register - - Core NVIC Register - - Core SCB Register - - Core SysTick Register - - Core MPU Register - ******************************************************************************/ -/** - \defgroup CMSIS_core_register Defines and Type Definitions - \brief Type definitions and defines for Cortex-M processor based devices. -*/ - -/** - \ingroup CMSIS_core_register - \defgroup CMSIS_CORE Status and Control Registers - \brief Core Register type definitions. - @{ - */ - -/** - \brief Union type to access the Application Program Status Register (APSR). - */ -typedef union -{ - struct - { - uint32_t _reserved0:28; /*!< bit: 0..27 Reserved */ - uint32_t V:1; /*!< bit: 28 Overflow condition code flag */ - uint32_t C:1; /*!< bit: 29 Carry condition code flag */ - uint32_t Z:1; /*!< bit: 30 Zero condition code flag */ - uint32_t N:1; /*!< bit: 31 Negative condition code flag */ - } b; /*!< Structure used for bit access */ - uint32_t w; /*!< Type used for word access */ -} APSR_Type; - -/* APSR Register Definitions */ -#define APSR_N_Pos 31U /*!< APSR: N Position */ -#define APSR_N_Msk (1UL << APSR_N_Pos) /*!< APSR: N Mask */ - -#define APSR_Z_Pos 30U /*!< APSR: Z Position */ -#define APSR_Z_Msk (1UL << APSR_Z_Pos) /*!< APSR: Z Mask */ - -#define APSR_C_Pos 29U /*!< APSR: C Position */ -#define APSR_C_Msk (1UL << APSR_C_Pos) /*!< APSR: C Mask */ - -#define APSR_V_Pos 28U /*!< APSR: V Position */ -#define APSR_V_Msk (1UL << APSR_V_Pos) /*!< APSR: V Mask */ - - -/** - \brief Union type to access the Interrupt Program Status Register (IPSR). - */ -typedef union -{ - struct - { - uint32_t ISR:9; /*!< bit: 0.. 8 Exception number */ - uint32_t _reserved0:23; /*!< bit: 9..31 Reserved */ - } b; /*!< Structure used for bit access */ - uint32_t w; /*!< Type used for word access */ -} IPSR_Type; - -/* IPSR Register Definitions */ -#define IPSR_ISR_Pos 0U /*!< IPSR: ISR Position */ -#define IPSR_ISR_Msk (0x1FFUL /*<< IPSR_ISR_Pos*/) /*!< IPSR: ISR Mask */ - - -/** - \brief Union type to access the Special-Purpose Program Status Registers (xPSR). - */ -typedef union -{ - struct - { - uint32_t ISR:9; /*!< bit: 0.. 8 Exception number */ - uint32_t _reserved0:15; /*!< bit: 9..23 Reserved */ - uint32_t T:1; /*!< bit: 24 Thumb bit (read 0) */ - uint32_t _reserved1:3; /*!< bit: 25..27 Reserved */ - uint32_t V:1; /*!< bit: 28 Overflow condition code flag */ - uint32_t C:1; /*!< bit: 29 Carry condition code flag */ - uint32_t Z:1; /*!< bit: 30 Zero condition code flag */ - uint32_t N:1; /*!< bit: 31 Negative condition code flag */ - } b; /*!< Structure used for bit access */ - uint32_t w; /*!< Type used for word access */ -} xPSR_Type; - -/* xPSR Register Definitions */ -#define xPSR_N_Pos 31U /*!< xPSR: N Position */ -#define xPSR_N_Msk (1UL << xPSR_N_Pos) /*!< xPSR: N Mask */ - -#define xPSR_Z_Pos 30U /*!< xPSR: Z Position */ -#define xPSR_Z_Msk (1UL << xPSR_Z_Pos) /*!< xPSR: Z Mask */ - -#define xPSR_C_Pos 29U /*!< xPSR: C Position */ -#define xPSR_C_Msk (1UL << xPSR_C_Pos) /*!< xPSR: C Mask */ - -#define xPSR_V_Pos 28U /*!< xPSR: V Position */ -#define xPSR_V_Msk (1UL << xPSR_V_Pos) /*!< xPSR: V Mask */ - -#define xPSR_T_Pos 24U /*!< xPSR: T Position */ -#define xPSR_T_Msk (1UL << xPSR_T_Pos) /*!< xPSR: T Mask */ - -#define xPSR_ISR_Pos 0U /*!< xPSR: ISR Position */ -#define xPSR_ISR_Msk (0x1FFUL /*<< xPSR_ISR_Pos*/) /*!< xPSR: ISR Mask */ - - -/** - \brief Union type to access the Control Registers (CONTROL). - */ -typedef union -{ - struct - { - uint32_t _reserved0:1; /*!< bit: 0 Reserved */ - uint32_t SPSEL:1; /*!< bit: 1 Stack to be used */ - uint32_t _reserved1:30; /*!< bit: 2..31 Reserved */ - } b; /*!< Structure used for bit access */ - uint32_t w; /*!< Type used for word access */ -} CONTROL_Type; - -/* CONTROL Register Definitions */ -#define CONTROL_SPSEL_Pos 1U /*!< CONTROL: SPSEL Position */ -#define CONTROL_SPSEL_Msk (1UL << CONTROL_SPSEL_Pos) /*!< CONTROL: SPSEL Mask */ - -/*@} end of group CMSIS_CORE */ - - -/** - \ingroup CMSIS_core_register - \defgroup CMSIS_NVIC Nested Vectored Interrupt Controller (NVIC) - \brief Type definitions for the NVIC Registers - @{ - */ - -/** - \brief Structure type to access the Nested Vectored Interrupt Controller (NVIC). - */ -typedef struct -{ - __IOM uint32_t ISER[1U]; /*!< Offset: 0x000 (R/W) Interrupt Set Enable Register */ - uint32_t RESERVED0[31U]; - __IOM uint32_t ICER[1U]; /*!< Offset: 0x080 (R/W) Interrupt Clear Enable Register */ - uint32_t RSERVED1[31U]; - __IOM uint32_t ISPR[1U]; /*!< Offset: 0x100 (R/W) Interrupt Set Pending Register */ - uint32_t RESERVED2[31U]; - __IOM uint32_t ICPR[1U]; /*!< Offset: 0x180 (R/W) Interrupt Clear Pending Register */ - uint32_t RESERVED3[31U]; - uint32_t RESERVED4[64U]; - __IOM uint32_t IP[8U]; /*!< Offset: 0x300 (R/W) Interrupt Priority Register */ -} NVIC_Type; - -/*@} end of group CMSIS_NVIC */ - - -/** - \ingroup CMSIS_core_register - \defgroup CMSIS_SCB System Control Block (SCB) - \brief Type definitions for the System Control Block Registers - @{ - */ - -/** - \brief Structure type to access the System Control Block (SCB). - */ -typedef struct -{ - __IM uint32_t CPUID; /*!< Offset: 0x000 (R/ ) CPUID Base Register */ - __IOM uint32_t ICSR; /*!< Offset: 0x004 (R/W) Interrupt Control and State Register */ - __IOM uint32_t VTOR; /*!< Offset: 0x008 (R/W) Vector Table Offset Register */ - __IOM uint32_t AIRCR; /*!< Offset: 0x00C (R/W) Application Interrupt and Reset Control Register */ - __IOM uint32_t SCR; /*!< Offset: 0x010 (R/W) System Control Register */ - __IOM uint32_t CCR; /*!< Offset: 0x014 (R/W) Configuration Control Register */ - uint32_t RESERVED0[1U]; - __IOM uint32_t SHP[2U]; /*!< Offset: 0x01C (R/W) System Handlers Priority Registers. [0] is RESERVED */ - __IOM uint32_t SHCSR; /*!< Offset: 0x024 (R/W) System Handler Control and State Register */ - uint32_t RESERVED1[154U]; - __IOM uint32_t SFCR; /*!< Offset: 0x290 (R/W) Security Features Control Register */ -} SCB_Type; - -/* SCB CPUID Register Definitions */ -#define SCB_CPUID_IMPLEMENTER_Pos 24U /*!< SCB CPUID: IMPLEMENTER Position */ -#define SCB_CPUID_IMPLEMENTER_Msk (0xFFUL << SCB_CPUID_IMPLEMENTER_Pos) /*!< SCB CPUID: IMPLEMENTER Mask */ - -#define SCB_CPUID_VARIANT_Pos 20U /*!< SCB CPUID: VARIANT Position */ -#define SCB_CPUID_VARIANT_Msk (0xFUL << SCB_CPUID_VARIANT_Pos) /*!< SCB CPUID: VARIANT Mask */ - -#define SCB_CPUID_ARCHITECTURE_Pos 16U /*!< SCB CPUID: ARCHITECTURE Position */ -#define SCB_CPUID_ARCHITECTURE_Msk (0xFUL << SCB_CPUID_ARCHITECTURE_Pos) /*!< SCB CPUID: ARCHITECTURE Mask */ - -#define SCB_CPUID_PARTNO_Pos 4U /*!< SCB CPUID: PARTNO Position */ -#define SCB_CPUID_PARTNO_Msk (0xFFFUL << SCB_CPUID_PARTNO_Pos) /*!< SCB CPUID: PARTNO Mask */ - -#define SCB_CPUID_REVISION_Pos 0U /*!< SCB CPUID: REVISION Position */ -#define SCB_CPUID_REVISION_Msk (0xFUL /*<< SCB_CPUID_REVISION_Pos*/) /*!< SCB CPUID: REVISION Mask */ - -/* SCB Interrupt Control State Register Definitions */ -#define SCB_ICSR_NMIPENDSET_Pos 31U /*!< SCB ICSR: NMIPENDSET Position */ -#define SCB_ICSR_NMIPENDSET_Msk (1UL << SCB_ICSR_NMIPENDSET_Pos) /*!< SCB ICSR: NMIPENDSET Mask */ - -#define SCB_ICSR_PENDSVSET_Pos 28U /*!< SCB ICSR: PENDSVSET Position */ -#define SCB_ICSR_PENDSVSET_Msk (1UL << SCB_ICSR_PENDSVSET_Pos) /*!< SCB ICSR: PENDSVSET Mask */ - -#define SCB_ICSR_PENDSVCLR_Pos 27U /*!< SCB ICSR: PENDSVCLR Position */ -#define SCB_ICSR_PENDSVCLR_Msk (1UL << SCB_ICSR_PENDSVCLR_Pos) /*!< SCB ICSR: PENDSVCLR Mask */ - -#define SCB_ICSR_PENDSTSET_Pos 26U /*!< SCB ICSR: PENDSTSET Position */ -#define SCB_ICSR_PENDSTSET_Msk (1UL << SCB_ICSR_PENDSTSET_Pos) /*!< SCB ICSR: PENDSTSET Mask */ - -#define SCB_ICSR_PENDSTCLR_Pos 25U /*!< SCB ICSR: PENDSTCLR Position */ -#define SCB_ICSR_PENDSTCLR_Msk (1UL << SCB_ICSR_PENDSTCLR_Pos) /*!< SCB ICSR: PENDSTCLR Mask */ - -#define SCB_ICSR_ISRPREEMPT_Pos 23U /*!< SCB ICSR: ISRPREEMPT Position */ -#define SCB_ICSR_ISRPREEMPT_Msk (1UL << SCB_ICSR_ISRPREEMPT_Pos) /*!< SCB ICSR: ISRPREEMPT Mask */ - -#define SCB_ICSR_ISRPENDING_Pos 22U /*!< SCB ICSR: ISRPENDING Position */ -#define SCB_ICSR_ISRPENDING_Msk (1UL << SCB_ICSR_ISRPENDING_Pos) /*!< SCB ICSR: ISRPENDING Mask */ - -#define SCB_ICSR_VECTPENDING_Pos 12U /*!< SCB ICSR: VECTPENDING Position */ -#define SCB_ICSR_VECTPENDING_Msk (0x1FFUL << SCB_ICSR_VECTPENDING_Pos) /*!< SCB ICSR: VECTPENDING Mask */ - -#define SCB_ICSR_VECTACTIVE_Pos 0U /*!< SCB ICSR: VECTACTIVE Position */ -#define SCB_ICSR_VECTACTIVE_Msk (0x1FFUL /*<< SCB_ICSR_VECTACTIVE_Pos*/) /*!< SCB ICSR: VECTACTIVE Mask */ - -/* SCB Interrupt Control State Register Definitions */ -#define SCB_VTOR_TBLOFF_Pos 7U /*!< SCB VTOR: TBLOFF Position */ -#define SCB_VTOR_TBLOFF_Msk (0x1FFFFFFUL << SCB_VTOR_TBLOFF_Pos) /*!< SCB VTOR: TBLOFF Mask */ - -/* SCB Application Interrupt and Reset Control Register Definitions */ -#define SCB_AIRCR_VECTKEY_Pos 16U /*!< SCB AIRCR: VECTKEY Position */ -#define SCB_AIRCR_VECTKEY_Msk (0xFFFFUL << SCB_AIRCR_VECTKEY_Pos) /*!< SCB AIRCR: VECTKEY Mask */ - -#define SCB_AIRCR_VECTKEYSTAT_Pos 16U /*!< SCB AIRCR: VECTKEYSTAT Position */ -#define SCB_AIRCR_VECTKEYSTAT_Msk (0xFFFFUL << SCB_AIRCR_VECTKEYSTAT_Pos) /*!< SCB AIRCR: VECTKEYSTAT Mask */ - -#define SCB_AIRCR_ENDIANESS_Pos 15U /*!< SCB AIRCR: ENDIANESS Position */ -#define SCB_AIRCR_ENDIANESS_Msk (1UL << SCB_AIRCR_ENDIANESS_Pos) /*!< SCB AIRCR: ENDIANESS Mask */ - -#define SCB_AIRCR_SYSRESETREQ_Pos 2U /*!< SCB AIRCR: SYSRESETREQ Position */ -#define SCB_AIRCR_SYSRESETREQ_Msk (1UL << SCB_AIRCR_SYSRESETREQ_Pos) /*!< SCB AIRCR: SYSRESETREQ Mask */ - -#define SCB_AIRCR_VECTCLRACTIVE_Pos 1U /*!< SCB AIRCR: VECTCLRACTIVE Position */ -#define SCB_AIRCR_VECTCLRACTIVE_Msk (1UL << SCB_AIRCR_VECTCLRACTIVE_Pos) /*!< SCB AIRCR: VECTCLRACTIVE Mask */ - -/* SCB System Control Register Definitions */ -#define SCB_SCR_SEVONPEND_Pos 4U /*!< SCB SCR: SEVONPEND Position */ -#define SCB_SCR_SEVONPEND_Msk (1UL << SCB_SCR_SEVONPEND_Pos) /*!< SCB SCR: SEVONPEND Mask */ - -#define SCB_SCR_SLEEPDEEP_Pos 2U /*!< SCB SCR: SLEEPDEEP Position */ -#define SCB_SCR_SLEEPDEEP_Msk (1UL << SCB_SCR_SLEEPDEEP_Pos) /*!< SCB SCR: SLEEPDEEP Mask */ - -#define SCB_SCR_SLEEPONEXIT_Pos 1U /*!< SCB SCR: SLEEPONEXIT Position */ -#define SCB_SCR_SLEEPONEXIT_Msk (1UL << SCB_SCR_SLEEPONEXIT_Pos) /*!< SCB SCR: SLEEPONEXIT Mask */ - -/* SCB Configuration Control Register Definitions */ -#define SCB_CCR_STKALIGN_Pos 9U /*!< SCB CCR: STKALIGN Position */ -#define SCB_CCR_STKALIGN_Msk (1UL << SCB_CCR_STKALIGN_Pos) /*!< SCB CCR: STKALIGN Mask */ - -#define SCB_CCR_UNALIGN_TRP_Pos 3U /*!< SCB CCR: UNALIGN_TRP Position */ -#define SCB_CCR_UNALIGN_TRP_Msk (1UL << SCB_CCR_UNALIGN_TRP_Pos) /*!< SCB CCR: UNALIGN_TRP Mask */ - -/* SCB System Handler Control and State Register Definitions */ -#define SCB_SHCSR_SVCALLPENDED_Pos 15U /*!< SCB SHCSR: SVCALLPENDED Position */ -#define SCB_SHCSR_SVCALLPENDED_Msk (1UL << SCB_SHCSR_SVCALLPENDED_Pos) /*!< SCB SHCSR: SVCALLPENDED Mask */ - -/*@} end of group CMSIS_SCB */ - - -/** - \ingroup CMSIS_core_register - \defgroup CMSIS_SCnSCB System Controls not in SCB (SCnSCB) - \brief Type definitions for the System Control and ID Register not in the SCB - @{ - */ - -/** - \brief Structure type to access the System Control and ID Register not in the SCB. - */ -typedef struct -{ - uint32_t RESERVED0[2U]; - __IOM uint32_t ACTLR; /*!< Offset: 0x008 (R/W) Auxiliary Control Register */ -} SCnSCB_Type; - -/* Auxiliary Control Register Definitions */ -#define SCnSCB_ACTLR_DISMCYCINT_Pos 0U /*!< ACTLR: DISMCYCINT Position */ -#define SCnSCB_ACTLR_DISMCYCINT_Msk (1UL /*<< SCnSCB_ACTLR_DISMCYCINT_Pos*/) /*!< ACTLR: DISMCYCINT Mask */ - -/*@} end of group CMSIS_SCnotSCB */ - - -/** - \ingroup CMSIS_core_register - \defgroup CMSIS_SysTick System Tick Timer (SysTick) - \brief Type definitions for the System Timer Registers. - @{ - */ - -/** - \brief Structure type to access the System Timer (SysTick). - */ -typedef struct -{ - __IOM uint32_t CTRL; /*!< Offset: 0x000 (R/W) SysTick Control and Status Register */ - __IOM uint32_t LOAD; /*!< Offset: 0x004 (R/W) SysTick Reload Value Register */ - __IOM uint32_t VAL; /*!< Offset: 0x008 (R/W) SysTick Current Value Register */ - __IM uint32_t CALIB; /*!< Offset: 0x00C (R/ ) SysTick Calibration Register */ -} SysTick_Type; - -/* SysTick Control / Status Register Definitions */ -#define SysTick_CTRL_COUNTFLAG_Pos 16U /*!< SysTick CTRL: COUNTFLAG Position */ -#define SysTick_CTRL_COUNTFLAG_Msk (1UL << SysTick_CTRL_COUNTFLAG_Pos) /*!< SysTick CTRL: COUNTFLAG Mask */ - -#define SysTick_CTRL_CLKSOURCE_Pos 2U /*!< SysTick CTRL: CLKSOURCE Position */ -#define SysTick_CTRL_CLKSOURCE_Msk (1UL << SysTick_CTRL_CLKSOURCE_Pos) /*!< SysTick CTRL: CLKSOURCE Mask */ - -#define SysTick_CTRL_TICKINT_Pos 1U /*!< SysTick CTRL: TICKINT Position */ -#define SysTick_CTRL_TICKINT_Msk (1UL << SysTick_CTRL_TICKINT_Pos) /*!< SysTick CTRL: TICKINT Mask */ - -#define SysTick_CTRL_ENABLE_Pos 0U /*!< SysTick CTRL: ENABLE Position */ -#define SysTick_CTRL_ENABLE_Msk (1UL /*<< SysTick_CTRL_ENABLE_Pos*/) /*!< SysTick CTRL: ENABLE Mask */ - -/* SysTick Reload Register Definitions */ -#define SysTick_LOAD_RELOAD_Pos 0U /*!< SysTick LOAD: RELOAD Position */ -#define SysTick_LOAD_RELOAD_Msk (0xFFFFFFUL /*<< SysTick_LOAD_RELOAD_Pos*/) /*!< SysTick LOAD: RELOAD Mask */ - -/* SysTick Current Register Definitions */ -#define SysTick_VAL_CURRENT_Pos 0U /*!< SysTick VAL: CURRENT Position */ -#define SysTick_VAL_CURRENT_Msk (0xFFFFFFUL /*<< SysTick_VAL_CURRENT_Pos*/) /*!< SysTick VAL: CURRENT Mask */ - -/* SysTick Calibration Register Definitions */ -#define SysTick_CALIB_NOREF_Pos 31U /*!< SysTick CALIB: NOREF Position */ -#define SysTick_CALIB_NOREF_Msk (1UL << SysTick_CALIB_NOREF_Pos) /*!< SysTick CALIB: NOREF Mask */ - -#define SysTick_CALIB_SKEW_Pos 30U /*!< SysTick CALIB: SKEW Position */ -#define SysTick_CALIB_SKEW_Msk (1UL << SysTick_CALIB_SKEW_Pos) /*!< SysTick CALIB: SKEW Mask */ - -#define SysTick_CALIB_TENMS_Pos 0U /*!< SysTick CALIB: TENMS Position */ -#define SysTick_CALIB_TENMS_Msk (0xFFFFFFUL /*<< SysTick_CALIB_TENMS_Pos*/) /*!< SysTick CALIB: TENMS Mask */ - -/*@} end of group CMSIS_SysTick */ - -#if defined (__MPU_PRESENT) && (__MPU_PRESENT == 1U) -/** - \ingroup CMSIS_core_register - \defgroup CMSIS_MPU Memory Protection Unit (MPU) - \brief Type definitions for the Memory Protection Unit (MPU) - @{ - */ - -/** - \brief Structure type to access the Memory Protection Unit (MPU). - */ -typedef struct -{ - __IM uint32_t TYPE; /*!< Offset: 0x000 (R/ ) MPU Type Register */ - __IOM uint32_t CTRL; /*!< Offset: 0x004 (R/W) MPU Control Register */ - __IOM uint32_t RNR; /*!< Offset: 0x008 (R/W) MPU Region RNRber Register */ - __IOM uint32_t RBAR; /*!< Offset: 0x00C (R/W) MPU Region Base Address Register */ - __IOM uint32_t RASR; /*!< Offset: 0x010 (R/W) MPU Region Attribute and Size Register */ -} MPU_Type; - -/* MPU Type Register Definitions */ -#define MPU_TYPE_IREGION_Pos 16U /*!< MPU TYPE: IREGION Position */ -#define MPU_TYPE_IREGION_Msk (0xFFUL << MPU_TYPE_IREGION_Pos) /*!< MPU TYPE: IREGION Mask */ - -#define MPU_TYPE_DREGION_Pos 8U /*!< MPU TYPE: DREGION Position */ -#define MPU_TYPE_DREGION_Msk (0xFFUL << MPU_TYPE_DREGION_Pos) /*!< MPU TYPE: DREGION Mask */ - -#define MPU_TYPE_SEPARATE_Pos 0U /*!< MPU TYPE: SEPARATE Position */ -#define MPU_TYPE_SEPARATE_Msk (1UL /*<< MPU_TYPE_SEPARATE_Pos*/) /*!< MPU TYPE: SEPARATE Mask */ - -/* MPU Control Register Definitions */ -#define MPU_CTRL_PRIVDEFENA_Pos 2U /*!< MPU CTRL: PRIVDEFENA Position */ -#define MPU_CTRL_PRIVDEFENA_Msk (1UL << MPU_CTRL_PRIVDEFENA_Pos) /*!< MPU CTRL: PRIVDEFENA Mask */ - -#define MPU_CTRL_HFNMIENA_Pos 1U /*!< MPU CTRL: HFNMIENA Position */ -#define MPU_CTRL_HFNMIENA_Msk (1UL << MPU_CTRL_HFNMIENA_Pos) /*!< MPU CTRL: HFNMIENA Mask */ - -#define MPU_CTRL_ENABLE_Pos 0U /*!< MPU CTRL: ENABLE Position */ -#define MPU_CTRL_ENABLE_Msk (1UL /*<< MPU_CTRL_ENABLE_Pos*/) /*!< MPU CTRL: ENABLE Mask */ - -/* MPU Region Number Register Definitions */ -#define MPU_RNR_REGION_Pos 0U /*!< MPU RNR: REGION Position */ -#define MPU_RNR_REGION_Msk (0xFFUL /*<< MPU_RNR_REGION_Pos*/) /*!< MPU RNR: REGION Mask */ - -/* MPU Region Base Address Register Definitions */ -#define MPU_RBAR_ADDR_Pos 8U /*!< MPU RBAR: ADDR Position */ -#define MPU_RBAR_ADDR_Msk (0xFFFFFFUL << MPU_RBAR_ADDR_Pos) /*!< MPU RBAR: ADDR Mask */ - -#define MPU_RBAR_VALID_Pos 4U /*!< MPU RBAR: VALID Position */ -#define MPU_RBAR_VALID_Msk (1UL << MPU_RBAR_VALID_Pos) /*!< MPU RBAR: VALID Mask */ - -#define MPU_RBAR_REGION_Pos 0U /*!< MPU RBAR: REGION Position */ -#define MPU_RBAR_REGION_Msk (0xFUL /*<< MPU_RBAR_REGION_Pos*/) /*!< MPU RBAR: REGION Mask */ - -/* MPU Region Attribute and Size Register Definitions */ -#define MPU_RASR_ATTRS_Pos 16U /*!< MPU RASR: MPU Region Attribute field Position */ -#define MPU_RASR_ATTRS_Msk (0xFFFFUL << MPU_RASR_ATTRS_Pos) /*!< MPU RASR: MPU Region Attribute field Mask */ - -#define MPU_RASR_XN_Pos 28U /*!< MPU RASR: ATTRS.XN Position */ -#define MPU_RASR_XN_Msk (1UL << MPU_RASR_XN_Pos) /*!< MPU RASR: ATTRS.XN Mask */ - -#define MPU_RASR_AP_Pos 24U /*!< MPU RASR: ATTRS.AP Position */ -#define MPU_RASR_AP_Msk (0x7UL << MPU_RASR_AP_Pos) /*!< MPU RASR: ATTRS.AP Mask */ - -#define MPU_RASR_TEX_Pos 19U /*!< MPU RASR: ATTRS.TEX Position */ -#define MPU_RASR_TEX_Msk (0x7UL << MPU_RASR_TEX_Pos) /*!< MPU RASR: ATTRS.TEX Mask */ - -#define MPU_RASR_S_Pos 18U /*!< MPU RASR: ATTRS.S Position */ -#define MPU_RASR_S_Msk (1UL << MPU_RASR_S_Pos) /*!< MPU RASR: ATTRS.S Mask */ - -#define MPU_RASR_C_Pos 17U /*!< MPU RASR: ATTRS.C Position */ -#define MPU_RASR_C_Msk (1UL << MPU_RASR_C_Pos) /*!< MPU RASR: ATTRS.C Mask */ - -#define MPU_RASR_B_Pos 16U /*!< MPU RASR: ATTRS.B Position */ -#define MPU_RASR_B_Msk (1UL << MPU_RASR_B_Pos) /*!< MPU RASR: ATTRS.B Mask */ - -#define MPU_RASR_SRD_Pos 8U /*!< MPU RASR: Sub-Region Disable Position */ -#define MPU_RASR_SRD_Msk (0xFFUL << MPU_RASR_SRD_Pos) /*!< MPU RASR: Sub-Region Disable Mask */ - -#define MPU_RASR_SIZE_Pos 1U /*!< MPU RASR: Region Size Field Position */ -#define MPU_RASR_SIZE_Msk (0x1FUL << MPU_RASR_SIZE_Pos) /*!< MPU RASR: Region Size Field Mask */ - -#define MPU_RASR_ENABLE_Pos 0U /*!< MPU RASR: Region enable bit Position */ -#define MPU_RASR_ENABLE_Msk (1UL /*<< MPU_RASR_ENABLE_Pos*/) /*!< MPU RASR: Region enable bit Disable Mask */ - -/*@} end of group CMSIS_MPU */ -#endif - - -/** - \ingroup CMSIS_core_register - \defgroup CMSIS_CoreDebug Core Debug Registers (CoreDebug) - \brief SC000 Core Debug Registers (DCB registers, SHCSR, and DFSR) are only accessible over DAP and not via processor. - Therefore they are not covered by the SC000 header file. - @{ - */ -/*@} end of group CMSIS_CoreDebug */ - - -/** - \ingroup CMSIS_core_register - \defgroup CMSIS_core_bitfield Core register bit field macros - \brief Macros for use with bit field definitions (xxx_Pos, xxx_Msk). - @{ - */ - -/** - \brief Mask and shift a bit field value for use in a register bit range. - \param[in] field Name of the register bit field. - \param[in] value Value of the bit field. This parameter is interpreted as an uint32_t type. - \return Masked and shifted value. -*/ -#define _VAL2FLD(field, value) (((uint32_t)(value) << field ## _Pos) & field ## _Msk) - -/** - \brief Mask and shift a register value to extract a bit filed value. - \param[in] field Name of the register bit field. - \param[in] value Value of register. This parameter is interpreted as an uint32_t type. - \return Masked and shifted bit field value. -*/ -#define _FLD2VAL(field, value) (((uint32_t)(value) & field ## _Msk) >> field ## _Pos) - -/*@} end of group CMSIS_core_bitfield */ - - -/** - \ingroup CMSIS_core_register - \defgroup CMSIS_core_base Core Definitions - \brief Definitions for base addresses, unions, and structures. - @{ - */ - -/* Memory mapping of Core Hardware */ -#define SCS_BASE (0xE000E000UL) /*!< System Control Space Base Address */ -#define SysTick_BASE (SCS_BASE + 0x0010UL) /*!< SysTick Base Address */ -#define NVIC_BASE (SCS_BASE + 0x0100UL) /*!< NVIC Base Address */ -#define SCB_BASE (SCS_BASE + 0x0D00UL) /*!< System Control Block Base Address */ - -#define SCnSCB ((SCnSCB_Type *) SCS_BASE ) /*!< System control Register not in SCB */ -#define SCB ((SCB_Type *) SCB_BASE ) /*!< SCB configuration struct */ -#define SysTick ((SysTick_Type *) SysTick_BASE ) /*!< SysTick configuration struct */ -#define NVIC ((NVIC_Type *) NVIC_BASE ) /*!< NVIC configuration struct */ - -#if defined (__MPU_PRESENT) && (__MPU_PRESENT == 1U) - #define MPU_BASE (SCS_BASE + 0x0D90UL) /*!< Memory Protection Unit */ - #define MPU ((MPU_Type *) MPU_BASE ) /*!< Memory Protection Unit */ -#endif - -/*@} */ - - - -/******************************************************************************* - * Hardware Abstraction Layer - Core Function Interface contains: - - Core NVIC Functions - - Core SysTick Functions - - Core Register Access Functions - ******************************************************************************/ -/** - \defgroup CMSIS_Core_FunctionInterface Functions and Instructions Reference -*/ - - - -/* ########################## NVIC functions #################################### */ -/** - \ingroup CMSIS_Core_FunctionInterface - \defgroup CMSIS_Core_NVICFunctions NVIC Functions - \brief Functions that manage interrupts and exceptions via the NVIC. - @{ - */ - -#ifdef CMSIS_NVIC_VIRTUAL - #ifndef CMSIS_NVIC_VIRTUAL_HEADER_FILE - #define CMSIS_NVIC_VIRTUAL_HEADER_FILE "cmsis_nvic_virtual.h" - #endif - #include CMSIS_NVIC_VIRTUAL_HEADER_FILE -#else -/*#define NVIC_SetPriorityGrouping __NVIC_SetPriorityGrouping not available for SC000 */ -/*#define NVIC_GetPriorityGrouping __NVIC_GetPriorityGrouping not available for SC000 */ - #define NVIC_EnableIRQ __NVIC_EnableIRQ - #define NVIC_GetEnableIRQ __NVIC_GetEnableIRQ - #define NVIC_DisableIRQ __NVIC_DisableIRQ - #define NVIC_GetPendingIRQ __NVIC_GetPendingIRQ - #define NVIC_SetPendingIRQ __NVIC_SetPendingIRQ - #define NVIC_ClearPendingIRQ __NVIC_ClearPendingIRQ -/*#define NVIC_GetActive __NVIC_GetActive not available for SC000 */ - #define NVIC_SetPriority __NVIC_SetPriority - #define NVIC_GetPriority __NVIC_GetPriority - #define NVIC_SystemReset __NVIC_SystemReset -#endif /* CMSIS_NVIC_VIRTUAL */ - -#ifdef CMSIS_VECTAB_VIRTUAL - #ifndef CMSIS_VECTAB_VIRTUAL_HEADER_FILE - #define CMSIS_VECTAB_VIRTUAL_HEADER_FILE "cmsis_vectab_virtual.h" - #endif - #include CMSIS_VECTAB_VIRTUAL_HEADER_FILE -#else - #define NVIC_SetVector __NVIC_SetVector - #define NVIC_GetVector __NVIC_GetVector -#endif /* (CMSIS_VECTAB_VIRTUAL) */ - -#define NVIC_USER_IRQ_OFFSET 16 - - -/* The following EXC_RETURN values are saved the LR on exception entry */ -#define EXC_RETURN_HANDLER (0xFFFFFFF1UL) /* return to Handler mode, uses MSP after return */ -#define EXC_RETURN_THREAD_MSP (0xFFFFFFF9UL) /* return to Thread mode, uses MSP after return */ -#define EXC_RETURN_THREAD_PSP (0xFFFFFFFDUL) /* return to Thread mode, uses PSP after return */ - - -/* Interrupt Priorities are WORD accessible only under Armv6-M */ -/* The following MACROS handle generation of the register offset and byte masks */ -#define _BIT_SHIFT(IRQn) ( ((((uint32_t)(int32_t)(IRQn)) ) & 0x03UL) * 8UL) -#define _SHP_IDX(IRQn) ( (((((uint32_t)(int32_t)(IRQn)) & 0x0FUL)-8UL) >> 2UL) ) -#define _IP_IDX(IRQn) ( (((uint32_t)(int32_t)(IRQn)) >> 2UL) ) - - -/** - \brief Enable Interrupt - \details Enables a device specific interrupt in the NVIC interrupt controller. - \param [in] IRQn Device specific interrupt number. - \note IRQn must not be negative. - */ -__STATIC_INLINE void __NVIC_EnableIRQ(IRQn_Type IRQn) -{ - if ((int32_t)(IRQn) >= 0) - { - NVIC->ISER[0U] = (uint32_t)(1UL << (((uint32_t)IRQn) & 0x1FUL)); - } -} - - -/** - \brief Get Interrupt Enable status - \details Returns a device specific interrupt enable status from the NVIC interrupt controller. - \param [in] IRQn Device specific interrupt number. - \return 0 Interrupt is not enabled. - \return 1 Interrupt is enabled. - \note IRQn must not be negative. - */ -__STATIC_INLINE uint32_t __NVIC_GetEnableIRQ(IRQn_Type IRQn) -{ - if ((int32_t)(IRQn) >= 0) - { - return((uint32_t)(((NVIC->ISER[0U] & (1UL << (((uint32_t)IRQn) & 0x1FUL))) != 0UL) ? 1UL : 0UL)); - } - else - { - return(0U); - } -} - - -/** - \brief Disable Interrupt - \details Disables a device specific interrupt in the NVIC interrupt controller. - \param [in] IRQn Device specific interrupt number. - \note IRQn must not be negative. - */ -__STATIC_INLINE void __NVIC_DisableIRQ(IRQn_Type IRQn) -{ - if ((int32_t)(IRQn) >= 0) - { - NVIC->ICER[0U] = (uint32_t)(1UL << (((uint32_t)IRQn) & 0x1FUL)); - __DSB(); - __ISB(); - } -} - - -/** - \brief Get Pending Interrupt - \details Reads the NVIC pending register and returns the pending bit for the specified device specific interrupt. - \param [in] IRQn Device specific interrupt number. - \return 0 Interrupt status is not pending. - \return 1 Interrupt status is pending. - \note IRQn must not be negative. - */ -__STATIC_INLINE uint32_t __NVIC_GetPendingIRQ(IRQn_Type IRQn) -{ - if ((int32_t)(IRQn) >= 0) - { - return((uint32_t)(((NVIC->ISPR[0U] & (1UL << (((uint32_t)IRQn) & 0x1FUL))) != 0UL) ? 1UL : 0UL)); - } - else - { - return(0U); - } -} - - -/** - \brief Set Pending Interrupt - \details Sets the pending bit of a device specific interrupt in the NVIC pending register. - \param [in] IRQn Device specific interrupt number. - \note IRQn must not be negative. - */ -__STATIC_INLINE void __NVIC_SetPendingIRQ(IRQn_Type IRQn) -{ - if ((int32_t)(IRQn) >= 0) - { - NVIC->ISPR[0U] = (uint32_t)(1UL << (((uint32_t)IRQn) & 0x1FUL)); - } -} - - -/** - \brief Clear Pending Interrupt - \details Clears the pending bit of a device specific interrupt in the NVIC pending register. - \param [in] IRQn Device specific interrupt number. - \note IRQn must not be negative. - */ -__STATIC_INLINE void __NVIC_ClearPendingIRQ(IRQn_Type IRQn) -{ - if ((int32_t)(IRQn) >= 0) - { - NVIC->ICPR[0U] = (uint32_t)(1UL << (((uint32_t)IRQn) & 0x1FUL)); - } -} - - -/** - \brief Set Interrupt Priority - \details Sets the priority of a device specific interrupt or a processor exception. - The interrupt number can be positive to specify a device specific interrupt, - or negative to specify a processor exception. - \param [in] IRQn Interrupt number. - \param [in] priority Priority to set. - \note The priority cannot be set for every processor exception. - */ -__STATIC_INLINE void __NVIC_SetPriority(IRQn_Type IRQn, uint32_t priority) -{ - if ((int32_t)(IRQn) >= 0) - { - NVIC->IP[_IP_IDX(IRQn)] = ((uint32_t)(NVIC->IP[_IP_IDX(IRQn)] & ~(0xFFUL << _BIT_SHIFT(IRQn))) | - (((priority << (8U - __NVIC_PRIO_BITS)) & (uint32_t)0xFFUL) << _BIT_SHIFT(IRQn))); - } - else - { - SCB->SHP[_SHP_IDX(IRQn)] = ((uint32_t)(SCB->SHP[_SHP_IDX(IRQn)] & ~(0xFFUL << _BIT_SHIFT(IRQn))) | - (((priority << (8U - __NVIC_PRIO_BITS)) & (uint32_t)0xFFUL) << _BIT_SHIFT(IRQn))); - } -} - - -/** - \brief Get Interrupt Priority - \details Reads the priority of a device specific interrupt or a processor exception. - The interrupt number can be positive to specify a device specific interrupt, - or negative to specify a processor exception. - \param [in] IRQn Interrupt number. - \return Interrupt Priority. - Value is aligned automatically to the implemented priority bits of the microcontroller. - */ -__STATIC_INLINE uint32_t __NVIC_GetPriority(IRQn_Type IRQn) -{ - - if ((int32_t)(IRQn) >= 0) - { - return((uint32_t)(((NVIC->IP[ _IP_IDX(IRQn)] >> _BIT_SHIFT(IRQn) ) & (uint32_t)0xFFUL) >> (8U - __NVIC_PRIO_BITS))); - } - else - { - return((uint32_t)(((SCB->SHP[_SHP_IDX(IRQn)] >> _BIT_SHIFT(IRQn) ) & (uint32_t)0xFFUL) >> (8U - __NVIC_PRIO_BITS))); - } -} - - -/** - \brief Set Interrupt Vector - \details Sets an interrupt vector in SRAM based interrupt vector table. - The interrupt number can be positive to specify a device specific interrupt, - or negative to specify a processor exception. - VTOR must been relocated to SRAM before. - \param [in] IRQn Interrupt number - \param [in] vector Address of interrupt handler function - */ -__STATIC_INLINE void __NVIC_SetVector(IRQn_Type IRQn, uint32_t vector) -{ - uint32_t *vectors = (uint32_t *)SCB->VTOR; - vectors[(int32_t)IRQn + NVIC_USER_IRQ_OFFSET] = vector; -} - - -/** - \brief Get Interrupt Vector - \details Reads an interrupt vector from interrupt vector table. - The interrupt number can be positive to specify a device specific interrupt, - or negative to specify a processor exception. - \param [in] IRQn Interrupt number. - \return Address of interrupt handler function - */ -__STATIC_INLINE uint32_t __NVIC_GetVector(IRQn_Type IRQn) -{ - uint32_t *vectors = (uint32_t *)SCB->VTOR; - return vectors[(int32_t)IRQn + NVIC_USER_IRQ_OFFSET]; -} - - -/** - \brief System Reset - \details Initiates a system reset request to reset the MCU. - */ -__NO_RETURN __STATIC_INLINE void __NVIC_SystemReset(void) -{ - __DSB(); /* Ensure all outstanding memory accesses included - buffered write are completed before reset */ - SCB->AIRCR = ((0x5FAUL << SCB_AIRCR_VECTKEY_Pos) | - SCB_AIRCR_SYSRESETREQ_Msk); - __DSB(); /* Ensure completion of memory access */ - - for(;;) /* wait until reset */ - { - __NOP(); - } -} - -/*@} end of CMSIS_Core_NVICFunctions */ - - -/* ########################## FPU functions #################################### */ -/** - \ingroup CMSIS_Core_FunctionInterface - \defgroup CMSIS_Core_FpuFunctions FPU Functions - \brief Function that provides FPU type. - @{ - */ - -/** - \brief get FPU type - \details returns the FPU type - \returns - - \b 0: No FPU - - \b 1: Single precision FPU - - \b 2: Double + Single precision FPU - */ -__STATIC_INLINE uint32_t SCB_GetFPUType(void) -{ - return 0U; /* No FPU */ -} - - -/*@} end of CMSIS_Core_FpuFunctions */ - - - -/* ################################## SysTick function ############################################ */ -/** - \ingroup CMSIS_Core_FunctionInterface - \defgroup CMSIS_Core_SysTickFunctions SysTick Functions - \brief Functions that configure the System. - @{ - */ - -#if defined (__Vendor_SysTickConfig) && (__Vendor_SysTickConfig == 0U) - -/** - \brief System Tick Configuration - \details Initializes the System Timer and its interrupt, and starts the System Tick Timer. - Counter is in free running mode to generate periodic interrupts. - \param [in] ticks Number of ticks between two interrupts. - \return 0 Function succeeded. - \return 1 Function failed. - \note When the variable __Vendor_SysTickConfig is set to 1, then the - function SysTick_Config is not included. In this case, the file device.h - must contain a vendor-specific implementation of this function. - */ -__STATIC_INLINE uint32_t SysTick_Config(uint32_t ticks) -{ - if ((ticks - 1UL) > SysTick_LOAD_RELOAD_Msk) - { - return (1UL); /* Reload value impossible */ - } - - SysTick->LOAD = (uint32_t)(ticks - 1UL); /* set reload register */ - NVIC_SetPriority (SysTick_IRQn, (1UL << __NVIC_PRIO_BITS) - 1UL); /* set Priority for Systick Interrupt */ - SysTick->VAL = 0UL; /* Load the SysTick Counter Value */ - SysTick->CTRL = SysTick_CTRL_CLKSOURCE_Msk | - SysTick_CTRL_TICKINT_Msk | - SysTick_CTRL_ENABLE_Msk; /* Enable SysTick IRQ and SysTick Timer */ - return (0UL); /* Function successful */ -} - -#endif - -/*@} end of CMSIS_Core_SysTickFunctions */ - - - - -#ifdef __cplusplus -} -#endif - -#endif /* __CORE_SC000_H_DEPENDANT */ - -#endif /* __CMSIS_GENERIC */ diff --git a/test_dma/Drivers/CMSIS/Include/core_sc300.h b/test_dma/Drivers/CMSIS/Include/core_sc300.h deleted file mode 100644 index 665822d..0000000 --- a/test_dma/Drivers/CMSIS/Include/core_sc300.h +++ /dev/null @@ -1,1915 +0,0 @@ -/**************************************************************************//** - * @file core_sc300.h - * @brief CMSIS SC300 Core Peripheral Access Layer Header File - * @version V5.0.6 - * @date 04. June 2018 - ******************************************************************************/ -/* - * Copyright (c) 2009-2018 Arm Limited. All rights reserved. - * - * SPDX-License-Identifier: Apache-2.0 - * - * Licensed under the Apache License, Version 2.0 (the License); you may - * not use this file except in compliance with the License. - * You may obtain a copy of the License at - * - * www.apache.org/licenses/LICENSE-2.0 - * - * Unless required by applicable law or agreed to in writing, software - * distributed under the License is distributed on an AS IS BASIS, WITHOUT - * WARRANTIES OR CONDITIONS OF ANY KIND, either express or implied. - * See the License for the specific language governing permissions and - * limitations under the License. - */ - -#if defined ( __ICCARM__ ) - #pragma system_include /* treat file as system include file for MISRA check */ -#elif defined (__clang__) - #pragma clang system_header /* treat file as system include file */ -#endif - -#ifndef __CORE_SC300_H_GENERIC -#define __CORE_SC300_H_GENERIC - -#include - -#ifdef __cplusplus - extern "C" { -#endif - -/** - \page CMSIS_MISRA_Exceptions MISRA-C:2004 Compliance Exceptions - CMSIS violates the following MISRA-C:2004 rules: - - \li Required Rule 8.5, object/function definition in header file.
- Function definitions in header files are used to allow 'inlining'. - - \li Required Rule 18.4, declaration of union type or object of union type: '{...}'.
- Unions are used for effective representation of core registers. - - \li Advisory Rule 19.7, Function-like macro defined.
- Function-like macros are used to allow more efficient code. - */ - - -/******************************************************************************* - * CMSIS definitions - ******************************************************************************/ -/** - \ingroup SC3000 - @{ - */ - -#include "cmsis_version.h" - -/* CMSIS SC300 definitions */ -#define __SC300_CMSIS_VERSION_MAIN (__CM_CMSIS_VERSION_MAIN) /*!< \deprecated [31:16] CMSIS HAL main version */ -#define __SC300_CMSIS_VERSION_SUB (__CM_CMSIS_VERSION_SUB) /*!< \deprecated [15:0] CMSIS HAL sub version */ -#define __SC300_CMSIS_VERSION ((__SC300_CMSIS_VERSION_MAIN << 16U) | \ - __SC300_CMSIS_VERSION_SUB ) /*!< \deprecated CMSIS HAL version number */ - -#define __CORTEX_SC (300U) /*!< Cortex secure core */ - -/** __FPU_USED indicates whether an FPU is used or not. - This core does not support an FPU at all -*/ -#define __FPU_USED 0U - -#if defined ( __CC_ARM ) - #if defined __TARGET_FPU_VFP - #error "Compiler generates FPU instructions for a device without an FPU (check __FPU_PRESENT)" - #endif - -#elif defined (__ARMCC_VERSION) && (__ARMCC_VERSION >= 6010050) - #if defined __ARM_PCS_VFP - #error "Compiler generates FPU instructions for a device without an FPU (check __FPU_PRESENT)" - #endif - -#elif defined ( __GNUC__ ) - #if defined (__VFP_FP__) && !defined(__SOFTFP__) - #error "Compiler generates FPU instructions for a device without an FPU (check __FPU_PRESENT)" - #endif - -#elif defined ( __ICCARM__ ) - #if defined __ARMVFP__ - #error "Compiler generates FPU instructions for a device without an FPU (check __FPU_PRESENT)" - #endif - -#elif defined ( __TI_ARM__ ) - #if defined __TI_VFP_SUPPORT__ - #error "Compiler generates FPU instructions for a device without an FPU (check __FPU_PRESENT)" - #endif - -#elif defined ( __TASKING__ ) - #if defined __FPU_VFP__ - #error "Compiler generates FPU instructions for a device without an FPU (check __FPU_PRESENT)" - #endif - -#elif defined ( __CSMC__ ) - #if ( __CSMC__ & 0x400U) - #error "Compiler generates FPU instructions for a device without an FPU (check __FPU_PRESENT)" - #endif - -#endif - -#include "cmsis_compiler.h" /* CMSIS compiler specific defines */ - - -#ifdef __cplusplus -} -#endif - -#endif /* __CORE_SC300_H_GENERIC */ - -#ifndef __CMSIS_GENERIC - -#ifndef __CORE_SC300_H_DEPENDANT -#define __CORE_SC300_H_DEPENDANT - -#ifdef __cplusplus - extern "C" { -#endif - -/* check device defines and use defaults */ -#if defined __CHECK_DEVICE_DEFINES - #ifndef __SC300_REV - #define __SC300_REV 0x0000U - #warning "__SC300_REV not defined in device header file; using default!" - #endif - - #ifndef __MPU_PRESENT - #define __MPU_PRESENT 0U - #warning "__MPU_PRESENT not defined in device header file; using default!" - #endif - - #ifndef __NVIC_PRIO_BITS - #define __NVIC_PRIO_BITS 3U - #warning "__NVIC_PRIO_BITS not defined in device header file; using default!" - #endif - - #ifndef __Vendor_SysTickConfig - #define __Vendor_SysTickConfig 0U - #warning "__Vendor_SysTickConfig not defined in device header file; using default!" - #endif -#endif - -/* IO definitions (access restrictions to peripheral registers) */ -/** - \defgroup CMSIS_glob_defs CMSIS Global Defines - - IO Type Qualifiers are used - \li to specify the access to peripheral variables. - \li for automatic generation of peripheral register debug information. -*/ -#ifdef __cplusplus - #define __I volatile /*!< Defines 'read only' permissions */ -#else - #define __I volatile const /*!< Defines 'read only' permissions */ -#endif -#define __O volatile /*!< Defines 'write only' permissions */ -#define __IO volatile /*!< Defines 'read / write' permissions */ - -/* following defines should be used for structure members */ -#define __IM volatile const /*! Defines 'read only' structure member permissions */ -#define __OM volatile /*! Defines 'write only' structure member permissions */ -#define __IOM volatile /*! Defines 'read / write' structure member permissions */ - -/*@} end of group SC300 */ - - - -/******************************************************************************* - * Register Abstraction - Core Register contain: - - Core Register - - Core NVIC Register - - Core SCB Register - - Core SysTick Register - - Core Debug Register - - Core MPU Register - ******************************************************************************/ -/** - \defgroup CMSIS_core_register Defines and Type Definitions - \brief Type definitions and defines for Cortex-M processor based devices. -*/ - -/** - \ingroup CMSIS_core_register - \defgroup CMSIS_CORE Status and Control Registers - \brief Core Register type definitions. - @{ - */ - -/** - \brief Union type to access the Application Program Status Register (APSR). - */ -typedef union -{ - struct - { - uint32_t _reserved0:27; /*!< bit: 0..26 Reserved */ - uint32_t Q:1; /*!< bit: 27 Saturation condition flag */ - uint32_t V:1; /*!< bit: 28 Overflow condition code flag */ - uint32_t C:1; /*!< bit: 29 Carry condition code flag */ - uint32_t Z:1; /*!< bit: 30 Zero condition code flag */ - uint32_t N:1; /*!< bit: 31 Negative condition code flag */ - } b; /*!< Structure used for bit access */ - uint32_t w; /*!< Type used for word access */ -} APSR_Type; - -/* APSR Register Definitions */ -#define APSR_N_Pos 31U /*!< APSR: N Position */ -#define APSR_N_Msk (1UL << APSR_N_Pos) /*!< APSR: N Mask */ - -#define APSR_Z_Pos 30U /*!< APSR: Z Position */ -#define APSR_Z_Msk (1UL << APSR_Z_Pos) /*!< APSR: Z Mask */ - -#define APSR_C_Pos 29U /*!< APSR: C Position */ -#define APSR_C_Msk (1UL << APSR_C_Pos) /*!< APSR: C Mask */ - -#define APSR_V_Pos 28U /*!< APSR: V Position */ -#define APSR_V_Msk (1UL << APSR_V_Pos) /*!< APSR: V Mask */ - -#define APSR_Q_Pos 27U /*!< APSR: Q Position */ -#define APSR_Q_Msk (1UL << APSR_Q_Pos) /*!< APSR: Q Mask */ - - -/** - \brief Union type to access the Interrupt Program Status Register (IPSR). - */ -typedef union -{ - struct - { - uint32_t ISR:9; /*!< bit: 0.. 8 Exception number */ - uint32_t _reserved0:23; /*!< bit: 9..31 Reserved */ - } b; /*!< Structure used for bit access */ - uint32_t w; /*!< Type used for word access */ -} IPSR_Type; - -/* IPSR Register Definitions */ -#define IPSR_ISR_Pos 0U /*!< IPSR: ISR Position */ -#define IPSR_ISR_Msk (0x1FFUL /*<< IPSR_ISR_Pos*/) /*!< IPSR: ISR Mask */ - - -/** - \brief Union type to access the Special-Purpose Program Status Registers (xPSR). - */ -typedef union -{ - struct - { - uint32_t ISR:9; /*!< bit: 0.. 8 Exception number */ - uint32_t _reserved0:1; /*!< bit: 9 Reserved */ - uint32_t ICI_IT_1:6; /*!< bit: 10..15 ICI/IT part 1 */ - uint32_t _reserved1:8; /*!< bit: 16..23 Reserved */ - uint32_t T:1; /*!< bit: 24 Thumb bit */ - uint32_t ICI_IT_2:2; /*!< bit: 25..26 ICI/IT part 2 */ - uint32_t Q:1; /*!< bit: 27 Saturation condition flag */ - uint32_t V:1; /*!< bit: 28 Overflow condition code flag */ - uint32_t C:1; /*!< bit: 29 Carry condition code flag */ - uint32_t Z:1; /*!< bit: 30 Zero condition code flag */ - uint32_t N:1; /*!< bit: 31 Negative condition code flag */ - } b; /*!< Structure used for bit access */ - uint32_t w; /*!< Type used for word access */ -} xPSR_Type; - -/* xPSR Register Definitions */ -#define xPSR_N_Pos 31U /*!< xPSR: N Position */ -#define xPSR_N_Msk (1UL << xPSR_N_Pos) /*!< xPSR: N Mask */ - -#define xPSR_Z_Pos 30U /*!< xPSR: Z Position */ -#define xPSR_Z_Msk (1UL << xPSR_Z_Pos) /*!< xPSR: Z Mask */ - -#define xPSR_C_Pos 29U /*!< xPSR: C Position */ -#define xPSR_C_Msk (1UL << xPSR_C_Pos) /*!< xPSR: C Mask */ - -#define xPSR_V_Pos 28U /*!< xPSR: V Position */ -#define xPSR_V_Msk (1UL << xPSR_V_Pos) /*!< xPSR: V Mask */ - -#define xPSR_Q_Pos 27U /*!< xPSR: Q Position */ -#define xPSR_Q_Msk (1UL << xPSR_Q_Pos) /*!< xPSR: Q Mask */ - -#define xPSR_ICI_IT_2_Pos 25U /*!< xPSR: ICI/IT part 2 Position */ -#define xPSR_ICI_IT_2_Msk (3UL << xPSR_ICI_IT_2_Pos) /*!< xPSR: ICI/IT part 2 Mask */ - -#define xPSR_T_Pos 24U /*!< xPSR: T Position */ -#define xPSR_T_Msk (1UL << xPSR_T_Pos) /*!< xPSR: T Mask */ - -#define xPSR_ICI_IT_1_Pos 10U /*!< xPSR: ICI/IT part 1 Position */ -#define xPSR_ICI_IT_1_Msk (0x3FUL << xPSR_ICI_IT_1_Pos) /*!< xPSR: ICI/IT part 1 Mask */ - -#define xPSR_ISR_Pos 0U /*!< xPSR: ISR Position */ -#define xPSR_ISR_Msk (0x1FFUL /*<< xPSR_ISR_Pos*/) /*!< xPSR: ISR Mask */ - - -/** - \brief Union type to access the Control Registers (CONTROL). - */ -typedef union -{ - struct - { - uint32_t nPRIV:1; /*!< bit: 0 Execution privilege in Thread mode */ - uint32_t SPSEL:1; /*!< bit: 1 Stack to be used */ - uint32_t _reserved1:30; /*!< bit: 2..31 Reserved */ - } b; /*!< Structure used for bit access */ - uint32_t w; /*!< Type used for word access */ -} CONTROL_Type; - -/* CONTROL Register Definitions */ -#define CONTROL_SPSEL_Pos 1U /*!< CONTROL: SPSEL Position */ -#define CONTROL_SPSEL_Msk (1UL << CONTROL_SPSEL_Pos) /*!< CONTROL: SPSEL Mask */ - -#define CONTROL_nPRIV_Pos 0U /*!< CONTROL: nPRIV Position */ -#define CONTROL_nPRIV_Msk (1UL /*<< CONTROL_nPRIV_Pos*/) /*!< CONTROL: nPRIV Mask */ - -/*@} end of group CMSIS_CORE */ - - -/** - \ingroup CMSIS_core_register - \defgroup CMSIS_NVIC Nested Vectored Interrupt Controller (NVIC) - \brief Type definitions for the NVIC Registers - @{ - */ - -/** - \brief Structure type to access the Nested Vectored Interrupt Controller (NVIC). - */ -typedef struct -{ - __IOM uint32_t ISER[8U]; /*!< Offset: 0x000 (R/W) Interrupt Set Enable Register */ - uint32_t RESERVED0[24U]; - __IOM uint32_t ICER[8U]; /*!< Offset: 0x080 (R/W) Interrupt Clear Enable Register */ - uint32_t RSERVED1[24U]; - __IOM uint32_t ISPR[8U]; /*!< Offset: 0x100 (R/W) Interrupt Set Pending Register */ - uint32_t RESERVED2[24U]; - __IOM uint32_t ICPR[8U]; /*!< Offset: 0x180 (R/W) Interrupt Clear Pending Register */ - uint32_t RESERVED3[24U]; - __IOM uint32_t IABR[8U]; /*!< Offset: 0x200 (R/W) Interrupt Active bit Register */ - uint32_t RESERVED4[56U]; - __IOM uint8_t IP[240U]; /*!< Offset: 0x300 (R/W) Interrupt Priority Register (8Bit wide) */ - uint32_t RESERVED5[644U]; - __OM uint32_t STIR; /*!< Offset: 0xE00 ( /W) Software Trigger Interrupt Register */ -} NVIC_Type; - -/* Software Triggered Interrupt Register Definitions */ -#define NVIC_STIR_INTID_Pos 0U /*!< STIR: INTLINESNUM Position */ -#define NVIC_STIR_INTID_Msk (0x1FFUL /*<< NVIC_STIR_INTID_Pos*/) /*!< STIR: INTLINESNUM Mask */ - -/*@} end of group CMSIS_NVIC */ - - -/** - \ingroup CMSIS_core_register - \defgroup CMSIS_SCB System Control Block (SCB) - \brief Type definitions for the System Control Block Registers - @{ - */ - -/** - \brief Structure type to access the System Control Block (SCB). - */ -typedef struct -{ - __IM uint32_t CPUID; /*!< Offset: 0x000 (R/ ) CPUID Base Register */ - __IOM uint32_t ICSR; /*!< Offset: 0x004 (R/W) Interrupt Control and State Register */ - __IOM uint32_t VTOR; /*!< Offset: 0x008 (R/W) Vector Table Offset Register */ - __IOM uint32_t AIRCR; /*!< Offset: 0x00C (R/W) Application Interrupt and Reset Control Register */ - __IOM uint32_t SCR; /*!< Offset: 0x010 (R/W) System Control Register */ - __IOM uint32_t CCR; /*!< Offset: 0x014 (R/W) Configuration Control Register */ - __IOM uint8_t SHP[12U]; /*!< Offset: 0x018 (R/W) System Handlers Priority Registers (4-7, 8-11, 12-15) */ - __IOM uint32_t SHCSR; /*!< Offset: 0x024 (R/W) System Handler Control and State Register */ - __IOM uint32_t CFSR; /*!< Offset: 0x028 (R/W) Configurable Fault Status Register */ - __IOM uint32_t HFSR; /*!< Offset: 0x02C (R/W) HardFault Status Register */ - __IOM uint32_t DFSR; /*!< Offset: 0x030 (R/W) Debug Fault Status Register */ - __IOM uint32_t MMFAR; /*!< Offset: 0x034 (R/W) MemManage Fault Address Register */ - __IOM uint32_t BFAR; /*!< Offset: 0x038 (R/W) BusFault Address Register */ - __IOM uint32_t AFSR; /*!< Offset: 0x03C (R/W) Auxiliary Fault Status Register */ - __IM uint32_t PFR[2U]; /*!< Offset: 0x040 (R/ ) Processor Feature Register */ - __IM uint32_t DFR; /*!< Offset: 0x048 (R/ ) Debug Feature Register */ - __IM uint32_t ADR; /*!< Offset: 0x04C (R/ ) Auxiliary Feature Register */ - __IM uint32_t MMFR[4U]; /*!< Offset: 0x050 (R/ ) Memory Model Feature Register */ - __IM uint32_t ISAR[5U]; /*!< Offset: 0x060 (R/ ) Instruction Set Attributes Register */ - uint32_t RESERVED0[5U]; - __IOM uint32_t CPACR; /*!< Offset: 0x088 (R/W) Coprocessor Access Control Register */ - uint32_t RESERVED1[129U]; - __IOM uint32_t SFCR; /*!< Offset: 0x290 (R/W) Security Features Control Register */ -} SCB_Type; - -/* SCB CPUID Register Definitions */ -#define SCB_CPUID_IMPLEMENTER_Pos 24U /*!< SCB CPUID: IMPLEMENTER Position */ -#define SCB_CPUID_IMPLEMENTER_Msk (0xFFUL << SCB_CPUID_IMPLEMENTER_Pos) /*!< SCB CPUID: IMPLEMENTER Mask */ - -#define SCB_CPUID_VARIANT_Pos 20U /*!< SCB CPUID: VARIANT Position */ -#define SCB_CPUID_VARIANT_Msk (0xFUL << SCB_CPUID_VARIANT_Pos) /*!< SCB CPUID: VARIANT Mask */ - -#define SCB_CPUID_ARCHITECTURE_Pos 16U /*!< SCB CPUID: ARCHITECTURE Position */ -#define SCB_CPUID_ARCHITECTURE_Msk (0xFUL << SCB_CPUID_ARCHITECTURE_Pos) /*!< SCB CPUID: ARCHITECTURE Mask */ - -#define SCB_CPUID_PARTNO_Pos 4U /*!< SCB CPUID: PARTNO Position */ -#define SCB_CPUID_PARTNO_Msk (0xFFFUL << SCB_CPUID_PARTNO_Pos) /*!< SCB CPUID: PARTNO Mask */ - -#define SCB_CPUID_REVISION_Pos 0U /*!< SCB CPUID: REVISION Position */ -#define SCB_CPUID_REVISION_Msk (0xFUL /*<< SCB_CPUID_REVISION_Pos*/) /*!< SCB CPUID: REVISION Mask */ - -/* SCB Interrupt Control State Register Definitions */ -#define SCB_ICSR_NMIPENDSET_Pos 31U /*!< SCB ICSR: NMIPENDSET Position */ -#define SCB_ICSR_NMIPENDSET_Msk (1UL << SCB_ICSR_NMIPENDSET_Pos) /*!< SCB ICSR: NMIPENDSET Mask */ - -#define SCB_ICSR_PENDSVSET_Pos 28U /*!< SCB ICSR: PENDSVSET Position */ -#define SCB_ICSR_PENDSVSET_Msk (1UL << SCB_ICSR_PENDSVSET_Pos) /*!< SCB ICSR: PENDSVSET Mask */ - -#define SCB_ICSR_PENDSVCLR_Pos 27U /*!< SCB ICSR: PENDSVCLR Position */ -#define SCB_ICSR_PENDSVCLR_Msk (1UL << SCB_ICSR_PENDSVCLR_Pos) /*!< SCB ICSR: PENDSVCLR Mask */ - -#define SCB_ICSR_PENDSTSET_Pos 26U /*!< SCB ICSR: PENDSTSET Position */ -#define SCB_ICSR_PENDSTSET_Msk (1UL << SCB_ICSR_PENDSTSET_Pos) /*!< SCB ICSR: PENDSTSET Mask */ - -#define SCB_ICSR_PENDSTCLR_Pos 25U /*!< SCB ICSR: PENDSTCLR Position */ -#define SCB_ICSR_PENDSTCLR_Msk (1UL << SCB_ICSR_PENDSTCLR_Pos) /*!< SCB ICSR: PENDSTCLR Mask */ - -#define SCB_ICSR_ISRPREEMPT_Pos 23U /*!< SCB ICSR: ISRPREEMPT Position */ -#define SCB_ICSR_ISRPREEMPT_Msk (1UL << SCB_ICSR_ISRPREEMPT_Pos) /*!< SCB ICSR: ISRPREEMPT Mask */ - -#define SCB_ICSR_ISRPENDING_Pos 22U /*!< SCB ICSR: ISRPENDING Position */ -#define SCB_ICSR_ISRPENDING_Msk (1UL << SCB_ICSR_ISRPENDING_Pos) /*!< SCB ICSR: ISRPENDING Mask */ - -#define SCB_ICSR_VECTPENDING_Pos 12U /*!< SCB ICSR: VECTPENDING Position */ -#define SCB_ICSR_VECTPENDING_Msk (0x1FFUL << SCB_ICSR_VECTPENDING_Pos) /*!< SCB ICSR: VECTPENDING Mask */ - -#define SCB_ICSR_RETTOBASE_Pos 11U /*!< SCB ICSR: RETTOBASE Position */ -#define SCB_ICSR_RETTOBASE_Msk (1UL << SCB_ICSR_RETTOBASE_Pos) /*!< SCB ICSR: RETTOBASE Mask */ - -#define SCB_ICSR_VECTACTIVE_Pos 0U /*!< SCB ICSR: VECTACTIVE Position */ -#define SCB_ICSR_VECTACTIVE_Msk (0x1FFUL /*<< SCB_ICSR_VECTACTIVE_Pos*/) /*!< SCB ICSR: VECTACTIVE Mask */ - -/* SCB Vector Table Offset Register Definitions */ -#define SCB_VTOR_TBLBASE_Pos 29U /*!< SCB VTOR: TBLBASE Position */ -#define SCB_VTOR_TBLBASE_Msk (1UL << SCB_VTOR_TBLBASE_Pos) /*!< SCB VTOR: TBLBASE Mask */ - -#define SCB_VTOR_TBLOFF_Pos 7U /*!< SCB VTOR: TBLOFF Position */ -#define SCB_VTOR_TBLOFF_Msk (0x3FFFFFUL << SCB_VTOR_TBLOFF_Pos) /*!< SCB VTOR: TBLOFF Mask */ - -/* SCB Application Interrupt and Reset Control Register Definitions */ -#define SCB_AIRCR_VECTKEY_Pos 16U /*!< SCB AIRCR: VECTKEY Position */ -#define SCB_AIRCR_VECTKEY_Msk (0xFFFFUL << SCB_AIRCR_VECTKEY_Pos) /*!< SCB AIRCR: VECTKEY Mask */ - -#define SCB_AIRCR_VECTKEYSTAT_Pos 16U /*!< SCB AIRCR: VECTKEYSTAT Position */ -#define SCB_AIRCR_VECTKEYSTAT_Msk (0xFFFFUL << SCB_AIRCR_VECTKEYSTAT_Pos) /*!< SCB AIRCR: VECTKEYSTAT Mask */ - -#define SCB_AIRCR_ENDIANESS_Pos 15U /*!< SCB AIRCR: ENDIANESS Position */ -#define SCB_AIRCR_ENDIANESS_Msk (1UL << SCB_AIRCR_ENDIANESS_Pos) /*!< SCB AIRCR: ENDIANESS Mask */ - -#define SCB_AIRCR_PRIGROUP_Pos 8U /*!< SCB AIRCR: PRIGROUP Position */ -#define SCB_AIRCR_PRIGROUP_Msk (7UL << SCB_AIRCR_PRIGROUP_Pos) /*!< SCB AIRCR: PRIGROUP Mask */ - -#define SCB_AIRCR_SYSRESETREQ_Pos 2U /*!< SCB AIRCR: SYSRESETREQ Position */ -#define SCB_AIRCR_SYSRESETREQ_Msk (1UL << SCB_AIRCR_SYSRESETREQ_Pos) /*!< SCB AIRCR: SYSRESETREQ Mask */ - -#define SCB_AIRCR_VECTCLRACTIVE_Pos 1U /*!< SCB AIRCR: VECTCLRACTIVE Position */ -#define SCB_AIRCR_VECTCLRACTIVE_Msk (1UL << SCB_AIRCR_VECTCLRACTIVE_Pos) /*!< SCB AIRCR: VECTCLRACTIVE Mask */ - -#define SCB_AIRCR_VECTRESET_Pos 0U /*!< SCB AIRCR: VECTRESET Position */ -#define SCB_AIRCR_VECTRESET_Msk (1UL /*<< SCB_AIRCR_VECTRESET_Pos*/) /*!< SCB AIRCR: VECTRESET Mask */ - -/* SCB System Control Register Definitions */ -#define SCB_SCR_SEVONPEND_Pos 4U /*!< SCB SCR: SEVONPEND Position */ -#define SCB_SCR_SEVONPEND_Msk (1UL << SCB_SCR_SEVONPEND_Pos) /*!< SCB SCR: SEVONPEND Mask */ - -#define SCB_SCR_SLEEPDEEP_Pos 2U /*!< SCB SCR: SLEEPDEEP Position */ -#define SCB_SCR_SLEEPDEEP_Msk (1UL << SCB_SCR_SLEEPDEEP_Pos) /*!< SCB SCR: SLEEPDEEP Mask */ - -#define SCB_SCR_SLEEPONEXIT_Pos 1U /*!< SCB SCR: SLEEPONEXIT Position */ -#define SCB_SCR_SLEEPONEXIT_Msk (1UL << SCB_SCR_SLEEPONEXIT_Pos) /*!< SCB SCR: SLEEPONEXIT Mask */ - -/* SCB Configuration Control Register Definitions */ -#define SCB_CCR_STKALIGN_Pos 9U /*!< SCB CCR: STKALIGN Position */ -#define SCB_CCR_STKALIGN_Msk (1UL << SCB_CCR_STKALIGN_Pos) /*!< SCB CCR: STKALIGN Mask */ - -#define SCB_CCR_BFHFNMIGN_Pos 8U /*!< SCB CCR: BFHFNMIGN Position */ -#define SCB_CCR_BFHFNMIGN_Msk (1UL << SCB_CCR_BFHFNMIGN_Pos) /*!< SCB CCR: BFHFNMIGN Mask */ - -#define SCB_CCR_DIV_0_TRP_Pos 4U /*!< SCB CCR: DIV_0_TRP Position */ -#define SCB_CCR_DIV_0_TRP_Msk (1UL << SCB_CCR_DIV_0_TRP_Pos) /*!< SCB CCR: DIV_0_TRP Mask */ - -#define SCB_CCR_UNALIGN_TRP_Pos 3U /*!< SCB CCR: UNALIGN_TRP Position */ -#define SCB_CCR_UNALIGN_TRP_Msk (1UL << SCB_CCR_UNALIGN_TRP_Pos) /*!< SCB CCR: UNALIGN_TRP Mask */ - -#define SCB_CCR_USERSETMPEND_Pos 1U /*!< SCB CCR: USERSETMPEND Position */ -#define SCB_CCR_USERSETMPEND_Msk (1UL << SCB_CCR_USERSETMPEND_Pos) /*!< SCB CCR: USERSETMPEND Mask */ - -#define SCB_CCR_NONBASETHRDENA_Pos 0U /*!< SCB CCR: NONBASETHRDENA Position */ -#define SCB_CCR_NONBASETHRDENA_Msk (1UL /*<< SCB_CCR_NONBASETHRDENA_Pos*/) /*!< SCB CCR: NONBASETHRDENA Mask */ - -/* SCB System Handler Control and State Register Definitions */ -#define SCB_SHCSR_USGFAULTENA_Pos 18U /*!< SCB SHCSR: USGFAULTENA Position */ -#define SCB_SHCSR_USGFAULTENA_Msk (1UL << SCB_SHCSR_USGFAULTENA_Pos) /*!< SCB SHCSR: USGFAULTENA Mask */ - -#define SCB_SHCSR_BUSFAULTENA_Pos 17U /*!< SCB SHCSR: BUSFAULTENA Position */ -#define SCB_SHCSR_BUSFAULTENA_Msk (1UL << SCB_SHCSR_BUSFAULTENA_Pos) /*!< SCB SHCSR: BUSFAULTENA Mask */ - -#define SCB_SHCSR_MEMFAULTENA_Pos 16U /*!< SCB SHCSR: MEMFAULTENA Position */ -#define SCB_SHCSR_MEMFAULTENA_Msk (1UL << SCB_SHCSR_MEMFAULTENA_Pos) /*!< SCB SHCSR: MEMFAULTENA Mask */ - -#define SCB_SHCSR_SVCALLPENDED_Pos 15U /*!< SCB SHCSR: SVCALLPENDED Position */ -#define SCB_SHCSR_SVCALLPENDED_Msk (1UL << SCB_SHCSR_SVCALLPENDED_Pos) /*!< SCB SHCSR: SVCALLPENDED Mask */ - -#define SCB_SHCSR_BUSFAULTPENDED_Pos 14U /*!< SCB SHCSR: BUSFAULTPENDED Position */ -#define SCB_SHCSR_BUSFAULTPENDED_Msk (1UL << SCB_SHCSR_BUSFAULTPENDED_Pos) /*!< SCB SHCSR: BUSFAULTPENDED Mask */ - -#define SCB_SHCSR_MEMFAULTPENDED_Pos 13U /*!< SCB SHCSR: MEMFAULTPENDED Position */ -#define SCB_SHCSR_MEMFAULTPENDED_Msk (1UL << SCB_SHCSR_MEMFAULTPENDED_Pos) /*!< SCB SHCSR: MEMFAULTPENDED Mask */ - -#define SCB_SHCSR_USGFAULTPENDED_Pos 12U /*!< SCB SHCSR: USGFAULTPENDED Position */ -#define SCB_SHCSR_USGFAULTPENDED_Msk (1UL << SCB_SHCSR_USGFAULTPENDED_Pos) /*!< SCB SHCSR: USGFAULTPENDED Mask */ - -#define SCB_SHCSR_SYSTICKACT_Pos 11U /*!< SCB SHCSR: SYSTICKACT Position */ -#define SCB_SHCSR_SYSTICKACT_Msk (1UL << SCB_SHCSR_SYSTICKACT_Pos) /*!< SCB SHCSR: SYSTICKACT Mask */ - -#define SCB_SHCSR_PENDSVACT_Pos 10U /*!< SCB SHCSR: PENDSVACT Position */ -#define SCB_SHCSR_PENDSVACT_Msk (1UL << SCB_SHCSR_PENDSVACT_Pos) /*!< SCB SHCSR: PENDSVACT Mask */ - -#define SCB_SHCSR_MONITORACT_Pos 8U /*!< SCB SHCSR: MONITORACT Position */ -#define SCB_SHCSR_MONITORACT_Msk (1UL << SCB_SHCSR_MONITORACT_Pos) /*!< SCB SHCSR: MONITORACT Mask */ - -#define SCB_SHCSR_SVCALLACT_Pos 7U /*!< SCB SHCSR: SVCALLACT Position */ -#define SCB_SHCSR_SVCALLACT_Msk (1UL << SCB_SHCSR_SVCALLACT_Pos) /*!< SCB SHCSR: SVCALLACT Mask */ - -#define SCB_SHCSR_USGFAULTACT_Pos 3U /*!< SCB SHCSR: USGFAULTACT Position */ -#define SCB_SHCSR_USGFAULTACT_Msk (1UL << SCB_SHCSR_USGFAULTACT_Pos) /*!< SCB SHCSR: USGFAULTACT Mask */ - -#define SCB_SHCSR_BUSFAULTACT_Pos 1U /*!< SCB SHCSR: BUSFAULTACT Position */ -#define SCB_SHCSR_BUSFAULTACT_Msk (1UL << SCB_SHCSR_BUSFAULTACT_Pos) /*!< SCB SHCSR: BUSFAULTACT Mask */ - -#define SCB_SHCSR_MEMFAULTACT_Pos 0U /*!< SCB SHCSR: MEMFAULTACT Position */ -#define SCB_SHCSR_MEMFAULTACT_Msk (1UL /*<< SCB_SHCSR_MEMFAULTACT_Pos*/) /*!< SCB SHCSR: MEMFAULTACT Mask */ - -/* SCB Configurable Fault Status Register Definitions */ -#define SCB_CFSR_USGFAULTSR_Pos 16U /*!< SCB CFSR: Usage Fault Status Register Position */ -#define SCB_CFSR_USGFAULTSR_Msk (0xFFFFUL << SCB_CFSR_USGFAULTSR_Pos) /*!< SCB CFSR: Usage Fault Status Register Mask */ - -#define SCB_CFSR_BUSFAULTSR_Pos 8U /*!< SCB CFSR: Bus Fault Status Register Position */ -#define SCB_CFSR_BUSFAULTSR_Msk (0xFFUL << SCB_CFSR_BUSFAULTSR_Pos) /*!< SCB CFSR: Bus Fault Status Register Mask */ - -#define SCB_CFSR_MEMFAULTSR_Pos 0U /*!< SCB CFSR: Memory Manage Fault Status Register Position */ -#define SCB_CFSR_MEMFAULTSR_Msk (0xFFUL /*<< SCB_CFSR_MEMFAULTSR_Pos*/) /*!< SCB CFSR: Memory Manage Fault Status Register Mask */ - -/* MemManage Fault Status Register (part of SCB Configurable Fault Status Register) */ -#define SCB_CFSR_MMARVALID_Pos (SCB_SHCSR_MEMFAULTACT_Pos + 7U) /*!< SCB CFSR (MMFSR): MMARVALID Position */ -#define SCB_CFSR_MMARVALID_Msk (1UL << SCB_CFSR_MMARVALID_Pos) /*!< SCB CFSR (MMFSR): MMARVALID Mask */ - -#define SCB_CFSR_MSTKERR_Pos (SCB_SHCSR_MEMFAULTACT_Pos + 4U) /*!< SCB CFSR (MMFSR): MSTKERR Position */ -#define SCB_CFSR_MSTKERR_Msk (1UL << SCB_CFSR_MSTKERR_Pos) /*!< SCB CFSR (MMFSR): MSTKERR Mask */ - -#define SCB_CFSR_MUNSTKERR_Pos (SCB_SHCSR_MEMFAULTACT_Pos + 3U) /*!< SCB CFSR (MMFSR): MUNSTKERR Position */ -#define SCB_CFSR_MUNSTKERR_Msk (1UL << SCB_CFSR_MUNSTKERR_Pos) /*!< SCB CFSR (MMFSR): MUNSTKERR Mask */ - -#define SCB_CFSR_DACCVIOL_Pos (SCB_SHCSR_MEMFAULTACT_Pos + 1U) /*!< SCB CFSR (MMFSR): DACCVIOL Position */ -#define SCB_CFSR_DACCVIOL_Msk (1UL << SCB_CFSR_DACCVIOL_Pos) /*!< SCB CFSR (MMFSR): DACCVIOL Mask */ - -#define SCB_CFSR_IACCVIOL_Pos (SCB_SHCSR_MEMFAULTACT_Pos + 0U) /*!< SCB CFSR (MMFSR): IACCVIOL Position */ -#define SCB_CFSR_IACCVIOL_Msk (1UL /*<< SCB_CFSR_IACCVIOL_Pos*/) /*!< SCB CFSR (MMFSR): IACCVIOL Mask */ - -/* BusFault Status Register (part of SCB Configurable Fault Status Register) */ -#define SCB_CFSR_BFARVALID_Pos (SCB_CFSR_BUSFAULTSR_Pos + 7U) /*!< SCB CFSR (BFSR): BFARVALID Position */ -#define SCB_CFSR_BFARVALID_Msk (1UL << SCB_CFSR_BFARVALID_Pos) /*!< SCB CFSR (BFSR): BFARVALID Mask */ - -#define SCB_CFSR_STKERR_Pos (SCB_CFSR_BUSFAULTSR_Pos + 4U) /*!< SCB CFSR (BFSR): STKERR Position */ -#define SCB_CFSR_STKERR_Msk (1UL << SCB_CFSR_STKERR_Pos) /*!< SCB CFSR (BFSR): STKERR Mask */ - -#define SCB_CFSR_UNSTKERR_Pos (SCB_CFSR_BUSFAULTSR_Pos + 3U) /*!< SCB CFSR (BFSR): UNSTKERR Position */ -#define SCB_CFSR_UNSTKERR_Msk (1UL << SCB_CFSR_UNSTKERR_Pos) /*!< SCB CFSR (BFSR): UNSTKERR Mask */ - -#define SCB_CFSR_IMPRECISERR_Pos (SCB_CFSR_BUSFAULTSR_Pos + 2U) /*!< SCB CFSR (BFSR): IMPRECISERR Position */ -#define SCB_CFSR_IMPRECISERR_Msk (1UL << SCB_CFSR_IMPRECISERR_Pos) /*!< SCB CFSR (BFSR): IMPRECISERR Mask */ - -#define SCB_CFSR_PRECISERR_Pos (SCB_CFSR_BUSFAULTSR_Pos + 1U) /*!< SCB CFSR (BFSR): PRECISERR Position */ -#define SCB_CFSR_PRECISERR_Msk (1UL << SCB_CFSR_PRECISERR_Pos) /*!< SCB CFSR (BFSR): PRECISERR Mask */ - -#define SCB_CFSR_IBUSERR_Pos (SCB_CFSR_BUSFAULTSR_Pos + 0U) /*!< SCB CFSR (BFSR): IBUSERR Position */ -#define SCB_CFSR_IBUSERR_Msk (1UL << SCB_CFSR_IBUSERR_Pos) /*!< SCB CFSR (BFSR): IBUSERR Mask */ - -/* UsageFault Status Register (part of SCB Configurable Fault Status Register) */ -#define SCB_CFSR_DIVBYZERO_Pos (SCB_CFSR_USGFAULTSR_Pos + 9U) /*!< SCB CFSR (UFSR): DIVBYZERO Position */ -#define SCB_CFSR_DIVBYZERO_Msk (1UL << SCB_CFSR_DIVBYZERO_Pos) /*!< SCB CFSR (UFSR): DIVBYZERO Mask */ - -#define SCB_CFSR_UNALIGNED_Pos (SCB_CFSR_USGFAULTSR_Pos + 8U) /*!< SCB CFSR (UFSR): UNALIGNED Position */ -#define SCB_CFSR_UNALIGNED_Msk (1UL << SCB_CFSR_UNALIGNED_Pos) /*!< SCB CFSR (UFSR): UNALIGNED Mask */ - -#define SCB_CFSR_NOCP_Pos (SCB_CFSR_USGFAULTSR_Pos + 3U) /*!< SCB CFSR (UFSR): NOCP Position */ -#define SCB_CFSR_NOCP_Msk (1UL << SCB_CFSR_NOCP_Pos) /*!< SCB CFSR (UFSR): NOCP Mask */ - -#define SCB_CFSR_INVPC_Pos (SCB_CFSR_USGFAULTSR_Pos + 2U) /*!< SCB CFSR (UFSR): INVPC Position */ -#define SCB_CFSR_INVPC_Msk (1UL << SCB_CFSR_INVPC_Pos) /*!< SCB CFSR (UFSR): INVPC Mask */ - -#define SCB_CFSR_INVSTATE_Pos (SCB_CFSR_USGFAULTSR_Pos + 1U) /*!< SCB CFSR (UFSR): INVSTATE Position */ -#define SCB_CFSR_INVSTATE_Msk (1UL << SCB_CFSR_INVSTATE_Pos) /*!< SCB CFSR (UFSR): INVSTATE Mask */ - -#define SCB_CFSR_UNDEFINSTR_Pos (SCB_CFSR_USGFAULTSR_Pos + 0U) /*!< SCB CFSR (UFSR): UNDEFINSTR Position */ -#define SCB_CFSR_UNDEFINSTR_Msk (1UL << SCB_CFSR_UNDEFINSTR_Pos) /*!< SCB CFSR (UFSR): UNDEFINSTR Mask */ - -/* SCB Hard Fault Status Register Definitions */ -#define SCB_HFSR_DEBUGEVT_Pos 31U /*!< SCB HFSR: DEBUGEVT Position */ -#define SCB_HFSR_DEBUGEVT_Msk (1UL << SCB_HFSR_DEBUGEVT_Pos) /*!< SCB HFSR: DEBUGEVT Mask */ - -#define SCB_HFSR_FORCED_Pos 30U /*!< SCB HFSR: FORCED Position */ -#define SCB_HFSR_FORCED_Msk (1UL << SCB_HFSR_FORCED_Pos) /*!< SCB HFSR: FORCED Mask */ - -#define SCB_HFSR_VECTTBL_Pos 1U /*!< SCB HFSR: VECTTBL Position */ -#define SCB_HFSR_VECTTBL_Msk (1UL << SCB_HFSR_VECTTBL_Pos) /*!< SCB HFSR: VECTTBL Mask */ - -/* SCB Debug Fault Status Register Definitions */ -#define SCB_DFSR_EXTERNAL_Pos 4U /*!< SCB DFSR: EXTERNAL Position */ -#define SCB_DFSR_EXTERNAL_Msk (1UL << SCB_DFSR_EXTERNAL_Pos) /*!< SCB DFSR: EXTERNAL Mask */ - -#define SCB_DFSR_VCATCH_Pos 3U /*!< SCB DFSR: VCATCH Position */ -#define SCB_DFSR_VCATCH_Msk (1UL << SCB_DFSR_VCATCH_Pos) /*!< SCB DFSR: VCATCH Mask */ - -#define SCB_DFSR_DWTTRAP_Pos 2U /*!< SCB DFSR: DWTTRAP Position */ -#define SCB_DFSR_DWTTRAP_Msk (1UL << SCB_DFSR_DWTTRAP_Pos) /*!< SCB DFSR: DWTTRAP Mask */ - -#define SCB_DFSR_BKPT_Pos 1U /*!< SCB DFSR: BKPT Position */ -#define SCB_DFSR_BKPT_Msk (1UL << SCB_DFSR_BKPT_Pos) /*!< SCB DFSR: BKPT Mask */ - -#define SCB_DFSR_HALTED_Pos 0U /*!< SCB DFSR: HALTED Position */ -#define SCB_DFSR_HALTED_Msk (1UL /*<< SCB_DFSR_HALTED_Pos*/) /*!< SCB DFSR: HALTED Mask */ - -/*@} end of group CMSIS_SCB */ - - -/** - \ingroup CMSIS_core_register - \defgroup CMSIS_SCnSCB System Controls not in SCB (SCnSCB) - \brief Type definitions for the System Control and ID Register not in the SCB - @{ - */ - -/** - \brief Structure type to access the System Control and ID Register not in the SCB. - */ -typedef struct -{ - uint32_t RESERVED0[1U]; - __IM uint32_t ICTR; /*!< Offset: 0x004 (R/ ) Interrupt Controller Type Register */ - uint32_t RESERVED1[1U]; -} SCnSCB_Type; - -/* Interrupt Controller Type Register Definitions */ -#define SCnSCB_ICTR_INTLINESNUM_Pos 0U /*!< ICTR: INTLINESNUM Position */ -#define SCnSCB_ICTR_INTLINESNUM_Msk (0xFUL /*<< SCnSCB_ICTR_INTLINESNUM_Pos*/) /*!< ICTR: INTLINESNUM Mask */ - -/*@} end of group CMSIS_SCnotSCB */ - - -/** - \ingroup CMSIS_core_register - \defgroup CMSIS_SysTick System Tick Timer (SysTick) - \brief Type definitions for the System Timer Registers. - @{ - */ - -/** - \brief Structure type to access the System Timer (SysTick). - */ -typedef struct -{ - __IOM uint32_t CTRL; /*!< Offset: 0x000 (R/W) SysTick Control and Status Register */ - __IOM uint32_t LOAD; /*!< Offset: 0x004 (R/W) SysTick Reload Value Register */ - __IOM uint32_t VAL; /*!< Offset: 0x008 (R/W) SysTick Current Value Register */ - __IM uint32_t CALIB; /*!< Offset: 0x00C (R/ ) SysTick Calibration Register */ -} SysTick_Type; - -/* SysTick Control / Status Register Definitions */ -#define SysTick_CTRL_COUNTFLAG_Pos 16U /*!< SysTick CTRL: COUNTFLAG Position */ -#define SysTick_CTRL_COUNTFLAG_Msk (1UL << SysTick_CTRL_COUNTFLAG_Pos) /*!< SysTick CTRL: COUNTFLAG Mask */ - -#define SysTick_CTRL_CLKSOURCE_Pos 2U /*!< SysTick CTRL: CLKSOURCE Position */ -#define SysTick_CTRL_CLKSOURCE_Msk (1UL << SysTick_CTRL_CLKSOURCE_Pos) /*!< SysTick CTRL: CLKSOURCE Mask */ - -#define SysTick_CTRL_TICKINT_Pos 1U /*!< SysTick CTRL: TICKINT Position */ -#define SysTick_CTRL_TICKINT_Msk (1UL << SysTick_CTRL_TICKINT_Pos) /*!< SysTick CTRL: TICKINT Mask */ - -#define SysTick_CTRL_ENABLE_Pos 0U /*!< SysTick CTRL: ENABLE Position */ -#define SysTick_CTRL_ENABLE_Msk (1UL /*<< SysTick_CTRL_ENABLE_Pos*/) /*!< SysTick CTRL: ENABLE Mask */ - -/* SysTick Reload Register Definitions */ -#define SysTick_LOAD_RELOAD_Pos 0U /*!< SysTick LOAD: RELOAD Position */ -#define SysTick_LOAD_RELOAD_Msk (0xFFFFFFUL /*<< SysTick_LOAD_RELOAD_Pos*/) /*!< SysTick LOAD: RELOAD Mask */ - -/* SysTick Current Register Definitions */ -#define SysTick_VAL_CURRENT_Pos 0U /*!< SysTick VAL: CURRENT Position */ -#define SysTick_VAL_CURRENT_Msk (0xFFFFFFUL /*<< SysTick_VAL_CURRENT_Pos*/) /*!< SysTick VAL: CURRENT Mask */ - -/* SysTick Calibration Register Definitions */ -#define SysTick_CALIB_NOREF_Pos 31U /*!< SysTick CALIB: NOREF Position */ -#define SysTick_CALIB_NOREF_Msk (1UL << SysTick_CALIB_NOREF_Pos) /*!< SysTick CALIB: NOREF Mask */ - -#define SysTick_CALIB_SKEW_Pos 30U /*!< SysTick CALIB: SKEW Position */ -#define SysTick_CALIB_SKEW_Msk (1UL << SysTick_CALIB_SKEW_Pos) /*!< SysTick CALIB: SKEW Mask */ - -#define SysTick_CALIB_TENMS_Pos 0U /*!< SysTick CALIB: TENMS Position */ -#define SysTick_CALIB_TENMS_Msk (0xFFFFFFUL /*<< SysTick_CALIB_TENMS_Pos*/) /*!< SysTick CALIB: TENMS Mask */ - -/*@} end of group CMSIS_SysTick */ - - -/** - \ingroup CMSIS_core_register - \defgroup CMSIS_ITM Instrumentation Trace Macrocell (ITM) - \brief Type definitions for the Instrumentation Trace Macrocell (ITM) - @{ - */ - -/** - \brief Structure type to access the Instrumentation Trace Macrocell Register (ITM). - */ -typedef struct -{ - __OM union - { - __OM uint8_t u8; /*!< Offset: 0x000 ( /W) ITM Stimulus Port 8-bit */ - __OM uint16_t u16; /*!< Offset: 0x000 ( /W) ITM Stimulus Port 16-bit */ - __OM uint32_t u32; /*!< Offset: 0x000 ( /W) ITM Stimulus Port 32-bit */ - } PORT [32U]; /*!< Offset: 0x000 ( /W) ITM Stimulus Port Registers */ - uint32_t RESERVED0[864U]; - __IOM uint32_t TER; /*!< Offset: 0xE00 (R/W) ITM Trace Enable Register */ - uint32_t RESERVED1[15U]; - __IOM uint32_t TPR; /*!< Offset: 0xE40 (R/W) ITM Trace Privilege Register */ - uint32_t RESERVED2[15U]; - __IOM uint32_t TCR; /*!< Offset: 0xE80 (R/W) ITM Trace Control Register */ - uint32_t RESERVED3[29U]; - __OM uint32_t IWR; /*!< Offset: 0xEF8 ( /W) ITM Integration Write Register */ - __IM uint32_t IRR; /*!< Offset: 0xEFC (R/ ) ITM Integration Read Register */ - __IOM uint32_t IMCR; /*!< Offset: 0xF00 (R/W) ITM Integration Mode Control Register */ - uint32_t RESERVED4[43U]; - __OM uint32_t LAR; /*!< Offset: 0xFB0 ( /W) ITM Lock Access Register */ - __IM uint32_t LSR; /*!< Offset: 0xFB4 (R/ ) ITM Lock Status Register */ - uint32_t RESERVED5[6U]; - __IM uint32_t PID4; /*!< Offset: 0xFD0 (R/ ) ITM Peripheral Identification Register #4 */ - __IM uint32_t PID5; /*!< Offset: 0xFD4 (R/ ) ITM Peripheral Identification Register #5 */ - __IM uint32_t PID6; /*!< Offset: 0xFD8 (R/ ) ITM Peripheral Identification Register #6 */ - __IM uint32_t PID7; /*!< Offset: 0xFDC (R/ ) ITM Peripheral Identification Register #7 */ - __IM uint32_t PID0; /*!< Offset: 0xFE0 (R/ ) ITM Peripheral Identification Register #0 */ - __IM uint32_t PID1; /*!< Offset: 0xFE4 (R/ ) ITM Peripheral Identification Register #1 */ - __IM uint32_t PID2; /*!< Offset: 0xFE8 (R/ ) ITM Peripheral Identification Register #2 */ - __IM uint32_t PID3; /*!< Offset: 0xFEC (R/ ) ITM Peripheral Identification Register #3 */ - __IM uint32_t CID0; /*!< Offset: 0xFF0 (R/ ) ITM Component Identification Register #0 */ - __IM uint32_t CID1; /*!< Offset: 0xFF4 (R/ ) ITM Component Identification Register #1 */ - __IM uint32_t CID2; /*!< Offset: 0xFF8 (R/ ) ITM Component Identification Register #2 */ - __IM uint32_t CID3; /*!< Offset: 0xFFC (R/ ) ITM Component Identification Register #3 */ -} ITM_Type; - -/* ITM Trace Privilege Register Definitions */ -#define ITM_TPR_PRIVMASK_Pos 0U /*!< ITM TPR: PRIVMASK Position */ -#define ITM_TPR_PRIVMASK_Msk (0xFUL /*<< ITM_TPR_PRIVMASK_Pos*/) /*!< ITM TPR: PRIVMASK Mask */ - -/* ITM Trace Control Register Definitions */ -#define ITM_TCR_BUSY_Pos 23U /*!< ITM TCR: BUSY Position */ -#define ITM_TCR_BUSY_Msk (1UL << ITM_TCR_BUSY_Pos) /*!< ITM TCR: BUSY Mask */ - -#define ITM_TCR_TraceBusID_Pos 16U /*!< ITM TCR: ATBID Position */ -#define ITM_TCR_TraceBusID_Msk (0x7FUL << ITM_TCR_TraceBusID_Pos) /*!< ITM TCR: ATBID Mask */ - -#define ITM_TCR_GTSFREQ_Pos 10U /*!< ITM TCR: Global timestamp frequency Position */ -#define ITM_TCR_GTSFREQ_Msk (3UL << ITM_TCR_GTSFREQ_Pos) /*!< ITM TCR: Global timestamp frequency Mask */ - -#define ITM_TCR_TSPrescale_Pos 8U /*!< ITM TCR: TSPrescale Position */ -#define ITM_TCR_TSPrescale_Msk (3UL << ITM_TCR_TSPrescale_Pos) /*!< ITM TCR: TSPrescale Mask */ - -#define ITM_TCR_SWOENA_Pos 4U /*!< ITM TCR: SWOENA Position */ -#define ITM_TCR_SWOENA_Msk (1UL << ITM_TCR_SWOENA_Pos) /*!< ITM TCR: SWOENA Mask */ - -#define ITM_TCR_DWTENA_Pos 3U /*!< ITM TCR: DWTENA Position */ -#define ITM_TCR_DWTENA_Msk (1UL << ITM_TCR_DWTENA_Pos) /*!< ITM TCR: DWTENA Mask */ - -#define ITM_TCR_SYNCENA_Pos 2U /*!< ITM TCR: SYNCENA Position */ -#define ITM_TCR_SYNCENA_Msk (1UL << ITM_TCR_SYNCENA_Pos) /*!< ITM TCR: SYNCENA Mask */ - -#define ITM_TCR_TSENA_Pos 1U /*!< ITM TCR: TSENA Position */ -#define ITM_TCR_TSENA_Msk (1UL << ITM_TCR_TSENA_Pos) /*!< ITM TCR: TSENA Mask */ - -#define ITM_TCR_ITMENA_Pos 0U /*!< ITM TCR: ITM Enable bit Position */ -#define ITM_TCR_ITMENA_Msk (1UL /*<< ITM_TCR_ITMENA_Pos*/) /*!< ITM TCR: ITM Enable bit Mask */ - -/* ITM Integration Write Register Definitions */ -#define ITM_IWR_ATVALIDM_Pos 0U /*!< ITM IWR: ATVALIDM Position */ -#define ITM_IWR_ATVALIDM_Msk (1UL /*<< ITM_IWR_ATVALIDM_Pos*/) /*!< ITM IWR: ATVALIDM Mask */ - -/* ITM Integration Read Register Definitions */ -#define ITM_IRR_ATREADYM_Pos 0U /*!< ITM IRR: ATREADYM Position */ -#define ITM_IRR_ATREADYM_Msk (1UL /*<< ITM_IRR_ATREADYM_Pos*/) /*!< ITM IRR: ATREADYM Mask */ - -/* ITM Integration Mode Control Register Definitions */ -#define ITM_IMCR_INTEGRATION_Pos 0U /*!< ITM IMCR: INTEGRATION Position */ -#define ITM_IMCR_INTEGRATION_Msk (1UL /*<< ITM_IMCR_INTEGRATION_Pos*/) /*!< ITM IMCR: INTEGRATION Mask */ - -/* ITM Lock Status Register Definitions */ -#define ITM_LSR_ByteAcc_Pos 2U /*!< ITM LSR: ByteAcc Position */ -#define ITM_LSR_ByteAcc_Msk (1UL << ITM_LSR_ByteAcc_Pos) /*!< ITM LSR: ByteAcc Mask */ - -#define ITM_LSR_Access_Pos 1U /*!< ITM LSR: Access Position */ -#define ITM_LSR_Access_Msk (1UL << ITM_LSR_Access_Pos) /*!< ITM LSR: Access Mask */ - -#define ITM_LSR_Present_Pos 0U /*!< ITM LSR: Present Position */ -#define ITM_LSR_Present_Msk (1UL /*<< ITM_LSR_Present_Pos*/) /*!< ITM LSR: Present Mask */ - -/*@}*/ /* end of group CMSIS_ITM */ - - -/** - \ingroup CMSIS_core_register - \defgroup CMSIS_DWT Data Watchpoint and Trace (DWT) - \brief Type definitions for the Data Watchpoint and Trace (DWT) - @{ - */ - -/** - \brief Structure type to access the Data Watchpoint and Trace Register (DWT). - */ -typedef struct -{ - __IOM uint32_t CTRL; /*!< Offset: 0x000 (R/W) Control Register */ - __IOM uint32_t CYCCNT; /*!< Offset: 0x004 (R/W) Cycle Count Register */ - __IOM uint32_t CPICNT; /*!< Offset: 0x008 (R/W) CPI Count Register */ - __IOM uint32_t EXCCNT; /*!< Offset: 0x00C (R/W) Exception Overhead Count Register */ - __IOM uint32_t SLEEPCNT; /*!< Offset: 0x010 (R/W) Sleep Count Register */ - __IOM uint32_t LSUCNT; /*!< Offset: 0x014 (R/W) LSU Count Register */ - __IOM uint32_t FOLDCNT; /*!< Offset: 0x018 (R/W) Folded-instruction Count Register */ - __IM uint32_t PCSR; /*!< Offset: 0x01C (R/ ) Program Counter Sample Register */ - __IOM uint32_t COMP0; /*!< Offset: 0x020 (R/W) Comparator Register 0 */ - __IOM uint32_t MASK0; /*!< Offset: 0x024 (R/W) Mask Register 0 */ - __IOM uint32_t FUNCTION0; /*!< Offset: 0x028 (R/W) Function Register 0 */ - uint32_t RESERVED0[1U]; - __IOM uint32_t COMP1; /*!< Offset: 0x030 (R/W) Comparator Register 1 */ - __IOM uint32_t MASK1; /*!< Offset: 0x034 (R/W) Mask Register 1 */ - __IOM uint32_t FUNCTION1; /*!< Offset: 0x038 (R/W) Function Register 1 */ - uint32_t RESERVED1[1U]; - __IOM uint32_t COMP2; /*!< Offset: 0x040 (R/W) Comparator Register 2 */ - __IOM uint32_t MASK2; /*!< Offset: 0x044 (R/W) Mask Register 2 */ - __IOM uint32_t FUNCTION2; /*!< Offset: 0x048 (R/W) Function Register 2 */ - uint32_t RESERVED2[1U]; - __IOM uint32_t COMP3; /*!< Offset: 0x050 (R/W) Comparator Register 3 */ - __IOM uint32_t MASK3; /*!< Offset: 0x054 (R/W) Mask Register 3 */ - __IOM uint32_t FUNCTION3; /*!< Offset: 0x058 (R/W) Function Register 3 */ -} DWT_Type; - -/* DWT Control Register Definitions */ -#define DWT_CTRL_NUMCOMP_Pos 28U /*!< DWT CTRL: NUMCOMP Position */ -#define DWT_CTRL_NUMCOMP_Msk (0xFUL << DWT_CTRL_NUMCOMP_Pos) /*!< DWT CTRL: NUMCOMP Mask */ - -#define DWT_CTRL_NOTRCPKT_Pos 27U /*!< DWT CTRL: NOTRCPKT Position */ -#define DWT_CTRL_NOTRCPKT_Msk (0x1UL << DWT_CTRL_NOTRCPKT_Pos) /*!< DWT CTRL: NOTRCPKT Mask */ - -#define DWT_CTRL_NOEXTTRIG_Pos 26U /*!< DWT CTRL: NOEXTTRIG Position */ -#define DWT_CTRL_NOEXTTRIG_Msk (0x1UL << DWT_CTRL_NOEXTTRIG_Pos) /*!< DWT CTRL: NOEXTTRIG Mask */ - -#define DWT_CTRL_NOCYCCNT_Pos 25U /*!< DWT CTRL: NOCYCCNT Position */ -#define DWT_CTRL_NOCYCCNT_Msk (0x1UL << DWT_CTRL_NOCYCCNT_Pos) /*!< DWT CTRL: NOCYCCNT Mask */ - -#define DWT_CTRL_NOPRFCNT_Pos 24U /*!< DWT CTRL: NOPRFCNT Position */ -#define DWT_CTRL_NOPRFCNT_Msk (0x1UL << DWT_CTRL_NOPRFCNT_Pos) /*!< DWT CTRL: NOPRFCNT Mask */ - -#define DWT_CTRL_CYCEVTENA_Pos 22U /*!< DWT CTRL: CYCEVTENA Position */ -#define DWT_CTRL_CYCEVTENA_Msk (0x1UL << DWT_CTRL_CYCEVTENA_Pos) /*!< DWT CTRL: CYCEVTENA Mask */ - -#define DWT_CTRL_FOLDEVTENA_Pos 21U /*!< DWT CTRL: FOLDEVTENA Position */ -#define DWT_CTRL_FOLDEVTENA_Msk (0x1UL << DWT_CTRL_FOLDEVTENA_Pos) /*!< DWT CTRL: FOLDEVTENA Mask */ - -#define DWT_CTRL_LSUEVTENA_Pos 20U /*!< DWT CTRL: LSUEVTENA Position */ -#define DWT_CTRL_LSUEVTENA_Msk (0x1UL << DWT_CTRL_LSUEVTENA_Pos) /*!< DWT CTRL: LSUEVTENA Mask */ - -#define DWT_CTRL_SLEEPEVTENA_Pos 19U /*!< DWT CTRL: SLEEPEVTENA Position */ -#define DWT_CTRL_SLEEPEVTENA_Msk (0x1UL << DWT_CTRL_SLEEPEVTENA_Pos) /*!< DWT CTRL: SLEEPEVTENA Mask */ - -#define DWT_CTRL_EXCEVTENA_Pos 18U /*!< DWT CTRL: EXCEVTENA Position */ -#define DWT_CTRL_EXCEVTENA_Msk (0x1UL << DWT_CTRL_EXCEVTENA_Pos) /*!< DWT CTRL: EXCEVTENA Mask */ - -#define DWT_CTRL_CPIEVTENA_Pos 17U /*!< DWT CTRL: CPIEVTENA Position */ -#define DWT_CTRL_CPIEVTENA_Msk (0x1UL << DWT_CTRL_CPIEVTENA_Pos) /*!< DWT CTRL: CPIEVTENA Mask */ - -#define DWT_CTRL_EXCTRCENA_Pos 16U /*!< DWT CTRL: EXCTRCENA Position */ -#define DWT_CTRL_EXCTRCENA_Msk (0x1UL << DWT_CTRL_EXCTRCENA_Pos) /*!< DWT CTRL: EXCTRCENA Mask */ - -#define DWT_CTRL_PCSAMPLENA_Pos 12U /*!< DWT CTRL: PCSAMPLENA Position */ -#define DWT_CTRL_PCSAMPLENA_Msk (0x1UL << DWT_CTRL_PCSAMPLENA_Pos) /*!< DWT CTRL: PCSAMPLENA Mask */ - -#define DWT_CTRL_SYNCTAP_Pos 10U /*!< DWT CTRL: SYNCTAP Position */ -#define DWT_CTRL_SYNCTAP_Msk (0x3UL << DWT_CTRL_SYNCTAP_Pos) /*!< DWT CTRL: SYNCTAP Mask */ - -#define DWT_CTRL_CYCTAP_Pos 9U /*!< DWT CTRL: CYCTAP Position */ -#define DWT_CTRL_CYCTAP_Msk (0x1UL << DWT_CTRL_CYCTAP_Pos) /*!< DWT CTRL: CYCTAP Mask */ - -#define DWT_CTRL_POSTINIT_Pos 5U /*!< DWT CTRL: POSTINIT Position */ -#define DWT_CTRL_POSTINIT_Msk (0xFUL << DWT_CTRL_POSTINIT_Pos) /*!< DWT CTRL: POSTINIT Mask */ - -#define DWT_CTRL_POSTPRESET_Pos 1U /*!< DWT CTRL: POSTPRESET Position */ -#define DWT_CTRL_POSTPRESET_Msk (0xFUL << DWT_CTRL_POSTPRESET_Pos) /*!< DWT CTRL: POSTPRESET Mask */ - -#define DWT_CTRL_CYCCNTENA_Pos 0U /*!< DWT CTRL: CYCCNTENA Position */ -#define DWT_CTRL_CYCCNTENA_Msk (0x1UL /*<< DWT_CTRL_CYCCNTENA_Pos*/) /*!< DWT CTRL: CYCCNTENA Mask */ - -/* DWT CPI Count Register Definitions */ -#define DWT_CPICNT_CPICNT_Pos 0U /*!< DWT CPICNT: CPICNT Position */ -#define DWT_CPICNT_CPICNT_Msk (0xFFUL /*<< DWT_CPICNT_CPICNT_Pos*/) /*!< DWT CPICNT: CPICNT Mask */ - -/* DWT Exception Overhead Count Register Definitions */ -#define DWT_EXCCNT_EXCCNT_Pos 0U /*!< DWT EXCCNT: EXCCNT Position */ -#define DWT_EXCCNT_EXCCNT_Msk (0xFFUL /*<< DWT_EXCCNT_EXCCNT_Pos*/) /*!< DWT EXCCNT: EXCCNT Mask */ - -/* DWT Sleep Count Register Definitions */ -#define DWT_SLEEPCNT_SLEEPCNT_Pos 0U /*!< DWT SLEEPCNT: SLEEPCNT Position */ -#define DWT_SLEEPCNT_SLEEPCNT_Msk (0xFFUL /*<< DWT_SLEEPCNT_SLEEPCNT_Pos*/) /*!< DWT SLEEPCNT: SLEEPCNT Mask */ - -/* DWT LSU Count Register Definitions */ -#define DWT_LSUCNT_LSUCNT_Pos 0U /*!< DWT LSUCNT: LSUCNT Position */ -#define DWT_LSUCNT_LSUCNT_Msk (0xFFUL /*<< DWT_LSUCNT_LSUCNT_Pos*/) /*!< DWT LSUCNT: LSUCNT Mask */ - -/* DWT Folded-instruction Count Register Definitions */ -#define DWT_FOLDCNT_FOLDCNT_Pos 0U /*!< DWT FOLDCNT: FOLDCNT Position */ -#define DWT_FOLDCNT_FOLDCNT_Msk (0xFFUL /*<< DWT_FOLDCNT_FOLDCNT_Pos*/) /*!< DWT FOLDCNT: FOLDCNT Mask */ - -/* DWT Comparator Mask Register Definitions */ -#define DWT_MASK_MASK_Pos 0U /*!< DWT MASK: MASK Position */ -#define DWT_MASK_MASK_Msk (0x1FUL /*<< DWT_MASK_MASK_Pos*/) /*!< DWT MASK: MASK Mask */ - -/* DWT Comparator Function Register Definitions */ -#define DWT_FUNCTION_MATCHED_Pos 24U /*!< DWT FUNCTION: MATCHED Position */ -#define DWT_FUNCTION_MATCHED_Msk (0x1UL << DWT_FUNCTION_MATCHED_Pos) /*!< DWT FUNCTION: MATCHED Mask */ - -#define DWT_FUNCTION_DATAVADDR1_Pos 16U /*!< DWT FUNCTION: DATAVADDR1 Position */ -#define DWT_FUNCTION_DATAVADDR1_Msk (0xFUL << DWT_FUNCTION_DATAVADDR1_Pos) /*!< DWT FUNCTION: DATAVADDR1 Mask */ - -#define DWT_FUNCTION_DATAVADDR0_Pos 12U /*!< DWT FUNCTION: DATAVADDR0 Position */ -#define DWT_FUNCTION_DATAVADDR0_Msk (0xFUL << DWT_FUNCTION_DATAVADDR0_Pos) /*!< DWT FUNCTION: DATAVADDR0 Mask */ - -#define DWT_FUNCTION_DATAVSIZE_Pos 10U /*!< DWT FUNCTION: DATAVSIZE Position */ -#define DWT_FUNCTION_DATAVSIZE_Msk (0x3UL << DWT_FUNCTION_DATAVSIZE_Pos) /*!< DWT FUNCTION: DATAVSIZE Mask */ - -#define DWT_FUNCTION_LNK1ENA_Pos 9U /*!< DWT FUNCTION: LNK1ENA Position */ -#define DWT_FUNCTION_LNK1ENA_Msk (0x1UL << DWT_FUNCTION_LNK1ENA_Pos) /*!< DWT FUNCTION: LNK1ENA Mask */ - -#define DWT_FUNCTION_DATAVMATCH_Pos 8U /*!< DWT FUNCTION: DATAVMATCH Position */ -#define DWT_FUNCTION_DATAVMATCH_Msk (0x1UL << DWT_FUNCTION_DATAVMATCH_Pos) /*!< DWT FUNCTION: DATAVMATCH Mask */ - -#define DWT_FUNCTION_CYCMATCH_Pos 7U /*!< DWT FUNCTION: CYCMATCH Position */ -#define DWT_FUNCTION_CYCMATCH_Msk (0x1UL << DWT_FUNCTION_CYCMATCH_Pos) /*!< DWT FUNCTION: CYCMATCH Mask */ - -#define DWT_FUNCTION_EMITRANGE_Pos 5U /*!< DWT FUNCTION: EMITRANGE Position */ -#define DWT_FUNCTION_EMITRANGE_Msk (0x1UL << DWT_FUNCTION_EMITRANGE_Pos) /*!< DWT FUNCTION: EMITRANGE Mask */ - -#define DWT_FUNCTION_FUNCTION_Pos 0U /*!< DWT FUNCTION: FUNCTION Position */ -#define DWT_FUNCTION_FUNCTION_Msk (0xFUL /*<< DWT_FUNCTION_FUNCTION_Pos*/) /*!< DWT FUNCTION: FUNCTION Mask */ - -/*@}*/ /* end of group CMSIS_DWT */ - - -/** - \ingroup CMSIS_core_register - \defgroup CMSIS_TPI Trace Port Interface (TPI) - \brief Type definitions for the Trace Port Interface (TPI) - @{ - */ - -/** - \brief Structure type to access the Trace Port Interface Register (TPI). - */ -typedef struct -{ - __IM uint32_t SSPSR; /*!< Offset: 0x000 (R/ ) Supported Parallel Port Size Register */ - __IOM uint32_t CSPSR; /*!< Offset: 0x004 (R/W) Current Parallel Port Size Register */ - uint32_t RESERVED0[2U]; - __IOM uint32_t ACPR; /*!< Offset: 0x010 (R/W) Asynchronous Clock Prescaler Register */ - uint32_t RESERVED1[55U]; - __IOM uint32_t SPPR; /*!< Offset: 0x0F0 (R/W) Selected Pin Protocol Register */ - uint32_t RESERVED2[131U]; - __IM uint32_t FFSR; /*!< Offset: 0x300 (R/ ) Formatter and Flush Status Register */ - __IOM uint32_t FFCR; /*!< Offset: 0x304 (R/W) Formatter and Flush Control Register */ - __IM uint32_t FSCR; /*!< Offset: 0x308 (R/ ) Formatter Synchronization Counter Register */ - uint32_t RESERVED3[759U]; - __IM uint32_t TRIGGER; /*!< Offset: 0xEE8 (R/ ) TRIGGER Register */ - __IM uint32_t FIFO0; /*!< Offset: 0xEEC (R/ ) Integration ETM Data */ - __IM uint32_t ITATBCTR2; /*!< Offset: 0xEF0 (R/ ) ITATBCTR2 */ - uint32_t RESERVED4[1U]; - __IM uint32_t ITATBCTR0; /*!< Offset: 0xEF8 (R/ ) ITATBCTR0 */ - __IM uint32_t FIFO1; /*!< Offset: 0xEFC (R/ ) Integration ITM Data */ - __IOM uint32_t ITCTRL; /*!< Offset: 0xF00 (R/W) Integration Mode Control */ - uint32_t RESERVED5[39U]; - __IOM uint32_t CLAIMSET; /*!< Offset: 0xFA0 (R/W) Claim tag set */ - __IOM uint32_t CLAIMCLR; /*!< Offset: 0xFA4 (R/W) Claim tag clear */ - uint32_t RESERVED7[8U]; - __IM uint32_t DEVID; /*!< Offset: 0xFC8 (R/ ) TPIU_DEVID */ - __IM uint32_t DEVTYPE; /*!< Offset: 0xFCC (R/ ) TPIU_DEVTYPE */ -} TPI_Type; - -/* TPI Asynchronous Clock Prescaler Register Definitions */ -#define TPI_ACPR_PRESCALER_Pos 0U /*!< TPI ACPR: PRESCALER Position */ -#define TPI_ACPR_PRESCALER_Msk (0x1FFFUL /*<< TPI_ACPR_PRESCALER_Pos*/) /*!< TPI ACPR: PRESCALER Mask */ - -/* TPI Selected Pin Protocol Register Definitions */ -#define TPI_SPPR_TXMODE_Pos 0U /*!< TPI SPPR: TXMODE Position */ -#define TPI_SPPR_TXMODE_Msk (0x3UL /*<< TPI_SPPR_TXMODE_Pos*/) /*!< TPI SPPR: TXMODE Mask */ - -/* TPI Formatter and Flush Status Register Definitions */ -#define TPI_FFSR_FtNonStop_Pos 3U /*!< TPI FFSR: FtNonStop Position */ -#define TPI_FFSR_FtNonStop_Msk (0x1UL << TPI_FFSR_FtNonStop_Pos) /*!< TPI FFSR: FtNonStop Mask */ - -#define TPI_FFSR_TCPresent_Pos 2U /*!< TPI FFSR: TCPresent Position */ -#define TPI_FFSR_TCPresent_Msk (0x1UL << TPI_FFSR_TCPresent_Pos) /*!< TPI FFSR: TCPresent Mask */ - -#define TPI_FFSR_FtStopped_Pos 1U /*!< TPI FFSR: FtStopped Position */ -#define TPI_FFSR_FtStopped_Msk (0x1UL << TPI_FFSR_FtStopped_Pos) /*!< TPI FFSR: FtStopped Mask */ - -#define TPI_FFSR_FlInProg_Pos 0U /*!< TPI FFSR: FlInProg Position */ -#define TPI_FFSR_FlInProg_Msk (0x1UL /*<< TPI_FFSR_FlInProg_Pos*/) /*!< TPI FFSR: FlInProg Mask */ - -/* TPI Formatter and Flush Control Register Definitions */ -#define TPI_FFCR_TrigIn_Pos 8U /*!< TPI FFCR: TrigIn Position */ -#define TPI_FFCR_TrigIn_Msk (0x1UL << TPI_FFCR_TrigIn_Pos) /*!< TPI FFCR: TrigIn Mask */ - -#define TPI_FFCR_EnFCont_Pos 1U /*!< TPI FFCR: EnFCont Position */ -#define TPI_FFCR_EnFCont_Msk (0x1UL << TPI_FFCR_EnFCont_Pos) /*!< TPI FFCR: EnFCont Mask */ - -/* TPI TRIGGER Register Definitions */ -#define TPI_TRIGGER_TRIGGER_Pos 0U /*!< TPI TRIGGER: TRIGGER Position */ -#define TPI_TRIGGER_TRIGGER_Msk (0x1UL /*<< TPI_TRIGGER_TRIGGER_Pos*/) /*!< TPI TRIGGER: TRIGGER Mask */ - -/* TPI Integration ETM Data Register Definitions (FIFO0) */ -#define TPI_FIFO0_ITM_ATVALID_Pos 29U /*!< TPI FIFO0: ITM_ATVALID Position */ -#define TPI_FIFO0_ITM_ATVALID_Msk (0x3UL << TPI_FIFO0_ITM_ATVALID_Pos) /*!< TPI FIFO0: ITM_ATVALID Mask */ - -#define TPI_FIFO0_ITM_bytecount_Pos 27U /*!< TPI FIFO0: ITM_bytecount Position */ -#define TPI_FIFO0_ITM_bytecount_Msk (0x3UL << TPI_FIFO0_ITM_bytecount_Pos) /*!< TPI FIFO0: ITM_bytecount Mask */ - -#define TPI_FIFO0_ETM_ATVALID_Pos 26U /*!< TPI FIFO0: ETM_ATVALID Position */ -#define TPI_FIFO0_ETM_ATVALID_Msk (0x3UL << TPI_FIFO0_ETM_ATVALID_Pos) /*!< TPI FIFO0: ETM_ATVALID Mask */ - -#define TPI_FIFO0_ETM_bytecount_Pos 24U /*!< TPI FIFO0: ETM_bytecount Position */ -#define TPI_FIFO0_ETM_bytecount_Msk (0x3UL << TPI_FIFO0_ETM_bytecount_Pos) /*!< TPI FIFO0: ETM_bytecount Mask */ - -#define TPI_FIFO0_ETM2_Pos 16U /*!< TPI FIFO0: ETM2 Position */ -#define TPI_FIFO0_ETM2_Msk (0xFFUL << TPI_FIFO0_ETM2_Pos) /*!< TPI FIFO0: ETM2 Mask */ - -#define TPI_FIFO0_ETM1_Pos 8U /*!< TPI FIFO0: ETM1 Position */ -#define TPI_FIFO0_ETM1_Msk (0xFFUL << TPI_FIFO0_ETM1_Pos) /*!< TPI FIFO0: ETM1 Mask */ - -#define TPI_FIFO0_ETM0_Pos 0U /*!< TPI FIFO0: ETM0 Position */ -#define TPI_FIFO0_ETM0_Msk (0xFFUL /*<< TPI_FIFO0_ETM0_Pos*/) /*!< TPI FIFO0: ETM0 Mask */ - -/* TPI ITATBCTR2 Register Definitions */ -#define TPI_ITATBCTR2_ATREADY2_Pos 0U /*!< TPI ITATBCTR2: ATREADY2 Position */ -#define TPI_ITATBCTR2_ATREADY2_Msk (0x1UL /*<< TPI_ITATBCTR2_ATREADY2_Pos*/) /*!< TPI ITATBCTR2: ATREADY2 Mask */ - -#define TPI_ITATBCTR2_ATREADY1_Pos 0U /*!< TPI ITATBCTR2: ATREADY1 Position */ -#define TPI_ITATBCTR2_ATREADY1_Msk (0x1UL /*<< TPI_ITATBCTR2_ATREADY1_Pos*/) /*!< TPI ITATBCTR2: ATREADY1 Mask */ - -/* TPI Integration ITM Data Register Definitions (FIFO1) */ -#define TPI_FIFO1_ITM_ATVALID_Pos 29U /*!< TPI FIFO1: ITM_ATVALID Position */ -#define TPI_FIFO1_ITM_ATVALID_Msk (0x3UL << TPI_FIFO1_ITM_ATVALID_Pos) /*!< TPI FIFO1: ITM_ATVALID Mask */ - -#define TPI_FIFO1_ITM_bytecount_Pos 27U /*!< TPI FIFO1: ITM_bytecount Position */ -#define TPI_FIFO1_ITM_bytecount_Msk (0x3UL << TPI_FIFO1_ITM_bytecount_Pos) /*!< TPI FIFO1: ITM_bytecount Mask */ - -#define TPI_FIFO1_ETM_ATVALID_Pos 26U /*!< TPI FIFO1: ETM_ATVALID Position */ -#define TPI_FIFO1_ETM_ATVALID_Msk (0x3UL << TPI_FIFO1_ETM_ATVALID_Pos) /*!< TPI FIFO1: ETM_ATVALID Mask */ - -#define TPI_FIFO1_ETM_bytecount_Pos 24U /*!< TPI FIFO1: ETM_bytecount Position */ -#define TPI_FIFO1_ETM_bytecount_Msk (0x3UL << TPI_FIFO1_ETM_bytecount_Pos) /*!< TPI FIFO1: ETM_bytecount Mask */ - -#define TPI_FIFO1_ITM2_Pos 16U /*!< TPI FIFO1: ITM2 Position */ -#define TPI_FIFO1_ITM2_Msk (0xFFUL << TPI_FIFO1_ITM2_Pos) /*!< TPI FIFO1: ITM2 Mask */ - -#define TPI_FIFO1_ITM1_Pos 8U /*!< TPI FIFO1: ITM1 Position */ -#define TPI_FIFO1_ITM1_Msk (0xFFUL << TPI_FIFO1_ITM1_Pos) /*!< TPI FIFO1: ITM1 Mask */ - -#define TPI_FIFO1_ITM0_Pos 0U /*!< TPI FIFO1: ITM0 Position */ -#define TPI_FIFO1_ITM0_Msk (0xFFUL /*<< TPI_FIFO1_ITM0_Pos*/) /*!< TPI FIFO1: ITM0 Mask */ - -/* TPI ITATBCTR0 Register Definitions */ -#define TPI_ITATBCTR0_ATREADY2_Pos 0U /*!< TPI ITATBCTR0: ATREADY2 Position */ -#define TPI_ITATBCTR0_ATREADY2_Msk (0x1UL /*<< TPI_ITATBCTR0_ATREADY2_Pos*/) /*!< TPI ITATBCTR0: ATREADY2 Mask */ - -#define TPI_ITATBCTR0_ATREADY1_Pos 0U /*!< TPI ITATBCTR0: ATREADY1 Position */ -#define TPI_ITATBCTR0_ATREADY1_Msk (0x1UL /*<< TPI_ITATBCTR0_ATREADY1_Pos*/) /*!< TPI ITATBCTR0: ATREADY1 Mask */ - -/* TPI Integration Mode Control Register Definitions */ -#define TPI_ITCTRL_Mode_Pos 0U /*!< TPI ITCTRL: Mode Position */ -#define TPI_ITCTRL_Mode_Msk (0x3UL /*<< TPI_ITCTRL_Mode_Pos*/) /*!< TPI ITCTRL: Mode Mask */ - -/* TPI DEVID Register Definitions */ -#define TPI_DEVID_NRZVALID_Pos 11U /*!< TPI DEVID: NRZVALID Position */ -#define TPI_DEVID_NRZVALID_Msk (0x1UL << TPI_DEVID_NRZVALID_Pos) /*!< TPI DEVID: NRZVALID Mask */ - -#define TPI_DEVID_MANCVALID_Pos 10U /*!< TPI DEVID: MANCVALID Position */ -#define TPI_DEVID_MANCVALID_Msk (0x1UL << TPI_DEVID_MANCVALID_Pos) /*!< TPI DEVID: MANCVALID Mask */ - -#define TPI_DEVID_PTINVALID_Pos 9U /*!< TPI DEVID: PTINVALID Position */ -#define TPI_DEVID_PTINVALID_Msk (0x1UL << TPI_DEVID_PTINVALID_Pos) /*!< TPI DEVID: PTINVALID Mask */ - -#define TPI_DEVID_MinBufSz_Pos 6U /*!< TPI DEVID: MinBufSz Position */ -#define TPI_DEVID_MinBufSz_Msk (0x7UL << TPI_DEVID_MinBufSz_Pos) /*!< TPI DEVID: MinBufSz Mask */ - -#define TPI_DEVID_AsynClkIn_Pos 5U /*!< TPI DEVID: AsynClkIn Position */ -#define TPI_DEVID_AsynClkIn_Msk (0x1UL << TPI_DEVID_AsynClkIn_Pos) /*!< TPI DEVID: AsynClkIn Mask */ - -#define TPI_DEVID_NrTraceInput_Pos 0U /*!< TPI DEVID: NrTraceInput Position */ -#define TPI_DEVID_NrTraceInput_Msk (0x1FUL /*<< TPI_DEVID_NrTraceInput_Pos*/) /*!< TPI DEVID: NrTraceInput Mask */ - -/* TPI DEVTYPE Register Definitions */ -#define TPI_DEVTYPE_SubType_Pos 4U /*!< TPI DEVTYPE: SubType Position */ -#define TPI_DEVTYPE_SubType_Msk (0xFUL /*<< TPI_DEVTYPE_SubType_Pos*/) /*!< TPI DEVTYPE: SubType Mask */ - -#define TPI_DEVTYPE_MajorType_Pos 0U /*!< TPI DEVTYPE: MajorType Position */ -#define TPI_DEVTYPE_MajorType_Msk (0xFUL << TPI_DEVTYPE_MajorType_Pos) /*!< TPI DEVTYPE: MajorType Mask */ - -/*@}*/ /* end of group CMSIS_TPI */ - - -#if defined (__MPU_PRESENT) && (__MPU_PRESENT == 1U) -/** - \ingroup CMSIS_core_register - \defgroup CMSIS_MPU Memory Protection Unit (MPU) - \brief Type definitions for the Memory Protection Unit (MPU) - @{ - */ - -/** - \brief Structure type to access the Memory Protection Unit (MPU). - */ -typedef struct -{ - __IM uint32_t TYPE; /*!< Offset: 0x000 (R/ ) MPU Type Register */ - __IOM uint32_t CTRL; /*!< Offset: 0x004 (R/W) MPU Control Register */ - __IOM uint32_t RNR; /*!< Offset: 0x008 (R/W) MPU Region RNRber Register */ - __IOM uint32_t RBAR; /*!< Offset: 0x00C (R/W) MPU Region Base Address Register */ - __IOM uint32_t RASR; /*!< Offset: 0x010 (R/W) MPU Region Attribute and Size Register */ - __IOM uint32_t RBAR_A1; /*!< Offset: 0x014 (R/W) MPU Alias 1 Region Base Address Register */ - __IOM uint32_t RASR_A1; /*!< Offset: 0x018 (R/W) MPU Alias 1 Region Attribute and Size Register */ - __IOM uint32_t RBAR_A2; /*!< Offset: 0x01C (R/W) MPU Alias 2 Region Base Address Register */ - __IOM uint32_t RASR_A2; /*!< Offset: 0x020 (R/W) MPU Alias 2 Region Attribute and Size Register */ - __IOM uint32_t RBAR_A3; /*!< Offset: 0x024 (R/W) MPU Alias 3 Region Base Address Register */ - __IOM uint32_t RASR_A3; /*!< Offset: 0x028 (R/W) MPU Alias 3 Region Attribute and Size Register */ -} MPU_Type; - -/* MPU Type Register Definitions */ -#define MPU_TYPE_IREGION_Pos 16U /*!< MPU TYPE: IREGION Position */ -#define MPU_TYPE_IREGION_Msk (0xFFUL << MPU_TYPE_IREGION_Pos) /*!< MPU TYPE: IREGION Mask */ - -#define MPU_TYPE_DREGION_Pos 8U /*!< MPU TYPE: DREGION Position */ -#define MPU_TYPE_DREGION_Msk (0xFFUL << MPU_TYPE_DREGION_Pos) /*!< MPU TYPE: DREGION Mask */ - -#define MPU_TYPE_SEPARATE_Pos 0U /*!< MPU TYPE: SEPARATE Position */ -#define MPU_TYPE_SEPARATE_Msk (1UL /*<< MPU_TYPE_SEPARATE_Pos*/) /*!< MPU TYPE: SEPARATE Mask */ - -/* MPU Control Register Definitions */ -#define MPU_CTRL_PRIVDEFENA_Pos 2U /*!< MPU CTRL: PRIVDEFENA Position */ -#define MPU_CTRL_PRIVDEFENA_Msk (1UL << MPU_CTRL_PRIVDEFENA_Pos) /*!< MPU CTRL: PRIVDEFENA Mask */ - -#define MPU_CTRL_HFNMIENA_Pos 1U /*!< MPU CTRL: HFNMIENA Position */ -#define MPU_CTRL_HFNMIENA_Msk (1UL << MPU_CTRL_HFNMIENA_Pos) /*!< MPU CTRL: HFNMIENA Mask */ - -#define MPU_CTRL_ENABLE_Pos 0U /*!< MPU CTRL: ENABLE Position */ -#define MPU_CTRL_ENABLE_Msk (1UL /*<< MPU_CTRL_ENABLE_Pos*/) /*!< MPU CTRL: ENABLE Mask */ - -/* MPU Region Number Register Definitions */ -#define MPU_RNR_REGION_Pos 0U /*!< MPU RNR: REGION Position */ -#define MPU_RNR_REGION_Msk (0xFFUL /*<< MPU_RNR_REGION_Pos*/) /*!< MPU RNR: REGION Mask */ - -/* MPU Region Base Address Register Definitions */ -#define MPU_RBAR_ADDR_Pos 5U /*!< MPU RBAR: ADDR Position */ -#define MPU_RBAR_ADDR_Msk (0x7FFFFFFUL << MPU_RBAR_ADDR_Pos) /*!< MPU RBAR: ADDR Mask */ - -#define MPU_RBAR_VALID_Pos 4U /*!< MPU RBAR: VALID Position */ -#define MPU_RBAR_VALID_Msk (1UL << MPU_RBAR_VALID_Pos) /*!< MPU RBAR: VALID Mask */ - -#define MPU_RBAR_REGION_Pos 0U /*!< MPU RBAR: REGION Position */ -#define MPU_RBAR_REGION_Msk (0xFUL /*<< MPU_RBAR_REGION_Pos*/) /*!< MPU RBAR: REGION Mask */ - -/* MPU Region Attribute and Size Register Definitions */ -#define MPU_RASR_ATTRS_Pos 16U /*!< MPU RASR: MPU Region Attribute field Position */ -#define MPU_RASR_ATTRS_Msk (0xFFFFUL << MPU_RASR_ATTRS_Pos) /*!< MPU RASR: MPU Region Attribute field Mask */ - -#define MPU_RASR_XN_Pos 28U /*!< MPU RASR: ATTRS.XN Position */ -#define MPU_RASR_XN_Msk (1UL << MPU_RASR_XN_Pos) /*!< MPU RASR: ATTRS.XN Mask */ - -#define MPU_RASR_AP_Pos 24U /*!< MPU RASR: ATTRS.AP Position */ -#define MPU_RASR_AP_Msk (0x7UL << MPU_RASR_AP_Pos) /*!< MPU RASR: ATTRS.AP Mask */ - -#define MPU_RASR_TEX_Pos 19U /*!< MPU RASR: ATTRS.TEX Position */ -#define MPU_RASR_TEX_Msk (0x7UL << MPU_RASR_TEX_Pos) /*!< MPU RASR: ATTRS.TEX Mask */ - -#define MPU_RASR_S_Pos 18U /*!< MPU RASR: ATTRS.S Position */ -#define MPU_RASR_S_Msk (1UL << MPU_RASR_S_Pos) /*!< MPU RASR: ATTRS.S Mask */ - -#define MPU_RASR_C_Pos 17U /*!< MPU RASR: ATTRS.C Position */ -#define MPU_RASR_C_Msk (1UL << MPU_RASR_C_Pos) /*!< MPU RASR: ATTRS.C Mask */ - -#define MPU_RASR_B_Pos 16U /*!< MPU RASR: ATTRS.B Position */ -#define MPU_RASR_B_Msk (1UL << MPU_RASR_B_Pos) /*!< MPU RASR: ATTRS.B Mask */ - -#define MPU_RASR_SRD_Pos 8U /*!< MPU RASR: Sub-Region Disable Position */ -#define MPU_RASR_SRD_Msk (0xFFUL << MPU_RASR_SRD_Pos) /*!< MPU RASR: Sub-Region Disable Mask */ - -#define MPU_RASR_SIZE_Pos 1U /*!< MPU RASR: Region Size Field Position */ -#define MPU_RASR_SIZE_Msk (0x1FUL << MPU_RASR_SIZE_Pos) /*!< MPU RASR: Region Size Field Mask */ - -#define MPU_RASR_ENABLE_Pos 0U /*!< MPU RASR: Region enable bit Position */ -#define MPU_RASR_ENABLE_Msk (1UL /*<< MPU_RASR_ENABLE_Pos*/) /*!< MPU RASR: Region enable bit Disable Mask */ - -/*@} end of group CMSIS_MPU */ -#endif - - -/** - \ingroup CMSIS_core_register - \defgroup CMSIS_CoreDebug Core Debug Registers (CoreDebug) - \brief Type definitions for the Core Debug Registers - @{ - */ - -/** - \brief Structure type to access the Core Debug Register (CoreDebug). - */ -typedef struct -{ - __IOM uint32_t DHCSR; /*!< Offset: 0x000 (R/W) Debug Halting Control and Status Register */ - __OM uint32_t DCRSR; /*!< Offset: 0x004 ( /W) Debug Core Register Selector Register */ - __IOM uint32_t DCRDR; /*!< Offset: 0x008 (R/W) Debug Core Register Data Register */ - __IOM uint32_t DEMCR; /*!< Offset: 0x00C (R/W) Debug Exception and Monitor Control Register */ -} CoreDebug_Type; - -/* Debug Halting Control and Status Register Definitions */ -#define CoreDebug_DHCSR_DBGKEY_Pos 16U /*!< CoreDebug DHCSR: DBGKEY Position */ -#define CoreDebug_DHCSR_DBGKEY_Msk (0xFFFFUL << CoreDebug_DHCSR_DBGKEY_Pos) /*!< CoreDebug DHCSR: DBGKEY Mask */ - -#define CoreDebug_DHCSR_S_RESET_ST_Pos 25U /*!< CoreDebug DHCSR: S_RESET_ST Position */ -#define CoreDebug_DHCSR_S_RESET_ST_Msk (1UL << CoreDebug_DHCSR_S_RESET_ST_Pos) /*!< CoreDebug DHCSR: S_RESET_ST Mask */ - -#define CoreDebug_DHCSR_S_RETIRE_ST_Pos 24U /*!< CoreDebug DHCSR: S_RETIRE_ST Position */ -#define CoreDebug_DHCSR_S_RETIRE_ST_Msk (1UL << CoreDebug_DHCSR_S_RETIRE_ST_Pos) /*!< CoreDebug DHCSR: S_RETIRE_ST Mask */ - -#define CoreDebug_DHCSR_S_LOCKUP_Pos 19U /*!< CoreDebug DHCSR: S_LOCKUP Position */ -#define CoreDebug_DHCSR_S_LOCKUP_Msk (1UL << CoreDebug_DHCSR_S_LOCKUP_Pos) /*!< CoreDebug DHCSR: S_LOCKUP Mask */ - -#define CoreDebug_DHCSR_S_SLEEP_Pos 18U /*!< CoreDebug DHCSR: S_SLEEP Position */ -#define CoreDebug_DHCSR_S_SLEEP_Msk (1UL << CoreDebug_DHCSR_S_SLEEP_Pos) /*!< CoreDebug DHCSR: S_SLEEP Mask */ - -#define CoreDebug_DHCSR_S_HALT_Pos 17U /*!< CoreDebug DHCSR: S_HALT Position */ -#define CoreDebug_DHCSR_S_HALT_Msk (1UL << CoreDebug_DHCSR_S_HALT_Pos) /*!< CoreDebug DHCSR: S_HALT Mask */ - -#define CoreDebug_DHCSR_S_REGRDY_Pos 16U /*!< CoreDebug DHCSR: S_REGRDY Position */ -#define CoreDebug_DHCSR_S_REGRDY_Msk (1UL << CoreDebug_DHCSR_S_REGRDY_Pos) /*!< CoreDebug DHCSR: S_REGRDY Mask */ - -#define CoreDebug_DHCSR_C_SNAPSTALL_Pos 5U /*!< CoreDebug DHCSR: C_SNAPSTALL Position */ -#define CoreDebug_DHCSR_C_SNAPSTALL_Msk (1UL << CoreDebug_DHCSR_C_SNAPSTALL_Pos) /*!< CoreDebug DHCSR: C_SNAPSTALL Mask */ - -#define CoreDebug_DHCSR_C_MASKINTS_Pos 3U /*!< CoreDebug DHCSR: C_MASKINTS Position */ -#define CoreDebug_DHCSR_C_MASKINTS_Msk (1UL << CoreDebug_DHCSR_C_MASKINTS_Pos) /*!< CoreDebug DHCSR: C_MASKINTS Mask */ - -#define CoreDebug_DHCSR_C_STEP_Pos 2U /*!< CoreDebug DHCSR: C_STEP Position */ -#define CoreDebug_DHCSR_C_STEP_Msk (1UL << CoreDebug_DHCSR_C_STEP_Pos) /*!< CoreDebug DHCSR: C_STEP Mask */ - -#define CoreDebug_DHCSR_C_HALT_Pos 1U /*!< CoreDebug DHCSR: C_HALT Position */ -#define CoreDebug_DHCSR_C_HALT_Msk (1UL << CoreDebug_DHCSR_C_HALT_Pos) /*!< CoreDebug DHCSR: C_HALT Mask */ - -#define CoreDebug_DHCSR_C_DEBUGEN_Pos 0U /*!< CoreDebug DHCSR: C_DEBUGEN Position */ -#define CoreDebug_DHCSR_C_DEBUGEN_Msk (1UL /*<< CoreDebug_DHCSR_C_DEBUGEN_Pos*/) /*!< CoreDebug DHCSR: C_DEBUGEN Mask */ - -/* Debug Core Register Selector Register Definitions */ -#define CoreDebug_DCRSR_REGWnR_Pos 16U /*!< CoreDebug DCRSR: REGWnR Position */ -#define CoreDebug_DCRSR_REGWnR_Msk (1UL << CoreDebug_DCRSR_REGWnR_Pos) /*!< CoreDebug DCRSR: REGWnR Mask */ - -#define CoreDebug_DCRSR_REGSEL_Pos 0U /*!< CoreDebug DCRSR: REGSEL Position */ -#define CoreDebug_DCRSR_REGSEL_Msk (0x1FUL /*<< CoreDebug_DCRSR_REGSEL_Pos*/) /*!< CoreDebug DCRSR: REGSEL Mask */ - -/* Debug Exception and Monitor Control Register Definitions */ -#define CoreDebug_DEMCR_TRCENA_Pos 24U /*!< CoreDebug DEMCR: TRCENA Position */ -#define CoreDebug_DEMCR_TRCENA_Msk (1UL << CoreDebug_DEMCR_TRCENA_Pos) /*!< CoreDebug DEMCR: TRCENA Mask */ - -#define CoreDebug_DEMCR_MON_REQ_Pos 19U /*!< CoreDebug DEMCR: MON_REQ Position */ -#define CoreDebug_DEMCR_MON_REQ_Msk (1UL << CoreDebug_DEMCR_MON_REQ_Pos) /*!< CoreDebug DEMCR: MON_REQ Mask */ - -#define CoreDebug_DEMCR_MON_STEP_Pos 18U /*!< CoreDebug DEMCR: MON_STEP Position */ -#define CoreDebug_DEMCR_MON_STEP_Msk (1UL << CoreDebug_DEMCR_MON_STEP_Pos) /*!< CoreDebug DEMCR: MON_STEP Mask */ - -#define CoreDebug_DEMCR_MON_PEND_Pos 17U /*!< CoreDebug DEMCR: MON_PEND Position */ -#define CoreDebug_DEMCR_MON_PEND_Msk (1UL << CoreDebug_DEMCR_MON_PEND_Pos) /*!< CoreDebug DEMCR: MON_PEND Mask */ - -#define CoreDebug_DEMCR_MON_EN_Pos 16U /*!< CoreDebug DEMCR: MON_EN Position */ -#define CoreDebug_DEMCR_MON_EN_Msk (1UL << CoreDebug_DEMCR_MON_EN_Pos) /*!< CoreDebug DEMCR: MON_EN Mask */ - -#define CoreDebug_DEMCR_VC_HARDERR_Pos 10U /*!< CoreDebug DEMCR: VC_HARDERR Position */ -#define CoreDebug_DEMCR_VC_HARDERR_Msk (1UL << CoreDebug_DEMCR_VC_HARDERR_Pos) /*!< CoreDebug DEMCR: VC_HARDERR Mask */ - -#define CoreDebug_DEMCR_VC_INTERR_Pos 9U /*!< CoreDebug DEMCR: VC_INTERR Position */ -#define CoreDebug_DEMCR_VC_INTERR_Msk (1UL << CoreDebug_DEMCR_VC_INTERR_Pos) /*!< CoreDebug DEMCR: VC_INTERR Mask */ - -#define CoreDebug_DEMCR_VC_BUSERR_Pos 8U /*!< CoreDebug DEMCR: VC_BUSERR Position */ -#define CoreDebug_DEMCR_VC_BUSERR_Msk (1UL << CoreDebug_DEMCR_VC_BUSERR_Pos) /*!< CoreDebug DEMCR: VC_BUSERR Mask */ - -#define CoreDebug_DEMCR_VC_STATERR_Pos 7U /*!< CoreDebug DEMCR: VC_STATERR Position */ -#define CoreDebug_DEMCR_VC_STATERR_Msk (1UL << CoreDebug_DEMCR_VC_STATERR_Pos) /*!< CoreDebug DEMCR: VC_STATERR Mask */ - -#define CoreDebug_DEMCR_VC_CHKERR_Pos 6U /*!< CoreDebug DEMCR: VC_CHKERR Position */ -#define CoreDebug_DEMCR_VC_CHKERR_Msk (1UL << CoreDebug_DEMCR_VC_CHKERR_Pos) /*!< CoreDebug DEMCR: VC_CHKERR Mask */ - -#define CoreDebug_DEMCR_VC_NOCPERR_Pos 5U /*!< CoreDebug DEMCR: VC_NOCPERR Position */ -#define CoreDebug_DEMCR_VC_NOCPERR_Msk (1UL << CoreDebug_DEMCR_VC_NOCPERR_Pos) /*!< CoreDebug DEMCR: VC_NOCPERR Mask */ - -#define CoreDebug_DEMCR_VC_MMERR_Pos 4U /*!< CoreDebug DEMCR: VC_MMERR Position */ -#define CoreDebug_DEMCR_VC_MMERR_Msk (1UL << CoreDebug_DEMCR_VC_MMERR_Pos) /*!< CoreDebug DEMCR: VC_MMERR Mask */ - -#define CoreDebug_DEMCR_VC_CORERESET_Pos 0U /*!< CoreDebug DEMCR: VC_CORERESET Position */ -#define CoreDebug_DEMCR_VC_CORERESET_Msk (1UL /*<< CoreDebug_DEMCR_VC_CORERESET_Pos*/) /*!< CoreDebug DEMCR: VC_CORERESET Mask */ - -/*@} end of group CMSIS_CoreDebug */ - - -/** - \ingroup CMSIS_core_register - \defgroup CMSIS_core_bitfield Core register bit field macros - \brief Macros for use with bit field definitions (xxx_Pos, xxx_Msk). - @{ - */ - -/** - \brief Mask and shift a bit field value for use in a register bit range. - \param[in] field Name of the register bit field. - \param[in] value Value of the bit field. This parameter is interpreted as an uint32_t type. - \return Masked and shifted value. -*/ -#define _VAL2FLD(field, value) (((uint32_t)(value) << field ## _Pos) & field ## _Msk) - -/** - \brief Mask and shift a register value to extract a bit filed value. - \param[in] field Name of the register bit field. - \param[in] value Value of register. This parameter is interpreted as an uint32_t type. - \return Masked and shifted bit field value. -*/ -#define _FLD2VAL(field, value) (((uint32_t)(value) & field ## _Msk) >> field ## _Pos) - -/*@} end of group CMSIS_core_bitfield */ - - -/** - \ingroup CMSIS_core_register - \defgroup CMSIS_core_base Core Definitions - \brief Definitions for base addresses, unions, and structures. - @{ - */ - -/* Memory mapping of Core Hardware */ -#define SCS_BASE (0xE000E000UL) /*!< System Control Space Base Address */ -#define ITM_BASE (0xE0000000UL) /*!< ITM Base Address */ -#define DWT_BASE (0xE0001000UL) /*!< DWT Base Address */ -#define TPI_BASE (0xE0040000UL) /*!< TPI Base Address */ -#define CoreDebug_BASE (0xE000EDF0UL) /*!< Core Debug Base Address */ -#define SysTick_BASE (SCS_BASE + 0x0010UL) /*!< SysTick Base Address */ -#define NVIC_BASE (SCS_BASE + 0x0100UL) /*!< NVIC Base Address */ -#define SCB_BASE (SCS_BASE + 0x0D00UL) /*!< System Control Block Base Address */ - -#define SCnSCB ((SCnSCB_Type *) SCS_BASE ) /*!< System control Register not in SCB */ -#define SCB ((SCB_Type *) SCB_BASE ) /*!< SCB configuration struct */ -#define SysTick ((SysTick_Type *) SysTick_BASE ) /*!< SysTick configuration struct */ -#define NVIC ((NVIC_Type *) NVIC_BASE ) /*!< NVIC configuration struct */ -#define ITM ((ITM_Type *) ITM_BASE ) /*!< ITM configuration struct */ -#define DWT ((DWT_Type *) DWT_BASE ) /*!< DWT configuration struct */ -#define TPI ((TPI_Type *) TPI_BASE ) /*!< TPI configuration struct */ -#define CoreDebug ((CoreDebug_Type *) CoreDebug_BASE) /*!< Core Debug configuration struct */ - -#if defined (__MPU_PRESENT) && (__MPU_PRESENT == 1U) - #define MPU_BASE (SCS_BASE + 0x0D90UL) /*!< Memory Protection Unit */ - #define MPU ((MPU_Type *) MPU_BASE ) /*!< Memory Protection Unit */ -#endif - -/*@} */ - - - -/******************************************************************************* - * Hardware Abstraction Layer - Core Function Interface contains: - - Core NVIC Functions - - Core SysTick Functions - - Core Debug Functions - - Core Register Access Functions - ******************************************************************************/ -/** - \defgroup CMSIS_Core_FunctionInterface Functions and Instructions Reference -*/ - - - -/* ########################## NVIC functions #################################### */ -/** - \ingroup CMSIS_Core_FunctionInterface - \defgroup CMSIS_Core_NVICFunctions NVIC Functions - \brief Functions that manage interrupts and exceptions via the NVIC. - @{ - */ - -#ifdef CMSIS_NVIC_VIRTUAL - #ifndef CMSIS_NVIC_VIRTUAL_HEADER_FILE - #define CMSIS_NVIC_VIRTUAL_HEADER_FILE "cmsis_nvic_virtual.h" - #endif - #include CMSIS_NVIC_VIRTUAL_HEADER_FILE -#else - #define NVIC_SetPriorityGrouping __NVIC_SetPriorityGrouping - #define NVIC_GetPriorityGrouping __NVIC_GetPriorityGrouping - #define NVIC_EnableIRQ __NVIC_EnableIRQ - #define NVIC_GetEnableIRQ __NVIC_GetEnableIRQ - #define NVIC_DisableIRQ __NVIC_DisableIRQ - #define NVIC_GetPendingIRQ __NVIC_GetPendingIRQ - #define NVIC_SetPendingIRQ __NVIC_SetPendingIRQ - #define NVIC_ClearPendingIRQ __NVIC_ClearPendingIRQ - #define NVIC_GetActive __NVIC_GetActive - #define NVIC_SetPriority __NVIC_SetPriority - #define NVIC_GetPriority __NVIC_GetPriority - #define NVIC_SystemReset __NVIC_SystemReset -#endif /* CMSIS_NVIC_VIRTUAL */ - -#ifdef CMSIS_VECTAB_VIRTUAL - #ifndef CMSIS_VECTAB_VIRTUAL_HEADER_FILE - #define CMSIS_VECTAB_VIRTUAL_HEADER_FILE "cmsis_vectab_virtual.h" - #endif - #include CMSIS_VECTAB_VIRTUAL_HEADER_FILE -#else - #define NVIC_SetVector __NVIC_SetVector - #define NVIC_GetVector __NVIC_GetVector -#endif /* (CMSIS_VECTAB_VIRTUAL) */ - -#define NVIC_USER_IRQ_OFFSET 16 - - -/* The following EXC_RETURN values are saved the LR on exception entry */ -#define EXC_RETURN_HANDLER (0xFFFFFFF1UL) /* return to Handler mode, uses MSP after return */ -#define EXC_RETURN_THREAD_MSP (0xFFFFFFF9UL) /* return to Thread mode, uses MSP after return */ -#define EXC_RETURN_THREAD_PSP (0xFFFFFFFDUL) /* return to Thread mode, uses PSP after return */ - - - -/** - \brief Set Priority Grouping - \details Sets the priority grouping field using the required unlock sequence. - The parameter PriorityGroup is assigned to the field SCB->AIRCR [10:8] PRIGROUP field. - Only values from 0..7 are used. - In case of a conflict between priority grouping and available - priority bits (__NVIC_PRIO_BITS), the smallest possible priority group is set. - \param [in] PriorityGroup Priority grouping field. - */ -__STATIC_INLINE void __NVIC_SetPriorityGrouping(uint32_t PriorityGroup) -{ - uint32_t reg_value; - uint32_t PriorityGroupTmp = (PriorityGroup & (uint32_t)0x07UL); /* only values 0..7 are used */ - - reg_value = SCB->AIRCR; /* read old register configuration */ - reg_value &= ~((uint32_t)(SCB_AIRCR_VECTKEY_Msk | SCB_AIRCR_PRIGROUP_Msk)); /* clear bits to change */ - reg_value = (reg_value | - ((uint32_t)0x5FAUL << SCB_AIRCR_VECTKEY_Pos) | - (PriorityGroupTmp << 8U) ); /* Insert write key and priorty group */ - SCB->AIRCR = reg_value; -} - - -/** - \brief Get Priority Grouping - \details Reads the priority grouping field from the NVIC Interrupt Controller. - \return Priority grouping field (SCB->AIRCR [10:8] PRIGROUP field). - */ -__STATIC_INLINE uint32_t __NVIC_GetPriorityGrouping(void) -{ - return ((uint32_t)((SCB->AIRCR & SCB_AIRCR_PRIGROUP_Msk) >> SCB_AIRCR_PRIGROUP_Pos)); -} - - -/** - \brief Enable Interrupt - \details Enables a device specific interrupt in the NVIC interrupt controller. - \param [in] IRQn Device specific interrupt number. - \note IRQn must not be negative. - */ -__STATIC_INLINE void __NVIC_EnableIRQ(IRQn_Type IRQn) -{ - if ((int32_t)(IRQn) >= 0) - { - NVIC->ISER[(((uint32_t)IRQn) >> 5UL)] = (uint32_t)(1UL << (((uint32_t)IRQn) & 0x1FUL)); - } -} - - -/** - \brief Get Interrupt Enable status - \details Returns a device specific interrupt enable status from the NVIC interrupt controller. - \param [in] IRQn Device specific interrupt number. - \return 0 Interrupt is not enabled. - \return 1 Interrupt is enabled. - \note IRQn must not be negative. - */ -__STATIC_INLINE uint32_t __NVIC_GetEnableIRQ(IRQn_Type IRQn) -{ - if ((int32_t)(IRQn) >= 0) - { - return((uint32_t)(((NVIC->ISER[(((uint32_t)IRQn) >> 5UL)] & (1UL << (((uint32_t)IRQn) & 0x1FUL))) != 0UL) ? 1UL : 0UL)); - } - else - { - return(0U); - } -} - - -/** - \brief Disable Interrupt - \details Disables a device specific interrupt in the NVIC interrupt controller. - \param [in] IRQn Device specific interrupt number. - \note IRQn must not be negative. - */ -__STATIC_INLINE void __NVIC_DisableIRQ(IRQn_Type IRQn) -{ - if ((int32_t)(IRQn) >= 0) - { - NVIC->ICER[(((uint32_t)IRQn) >> 5UL)] = (uint32_t)(1UL << (((uint32_t)IRQn) & 0x1FUL)); - __DSB(); - __ISB(); - } -} - - -/** - \brief Get Pending Interrupt - \details Reads the NVIC pending register and returns the pending bit for the specified device specific interrupt. - \param [in] IRQn Device specific interrupt number. - \return 0 Interrupt status is not pending. - \return 1 Interrupt status is pending. - \note IRQn must not be negative. - */ -__STATIC_INLINE uint32_t __NVIC_GetPendingIRQ(IRQn_Type IRQn) -{ - if ((int32_t)(IRQn) >= 0) - { - return((uint32_t)(((NVIC->ISPR[(((uint32_t)IRQn) >> 5UL)] & (1UL << (((uint32_t)IRQn) & 0x1FUL))) != 0UL) ? 1UL : 0UL)); - } - else - { - return(0U); - } -} - - -/** - \brief Set Pending Interrupt - \details Sets the pending bit of a device specific interrupt in the NVIC pending register. - \param [in] IRQn Device specific interrupt number. - \note IRQn must not be negative. - */ -__STATIC_INLINE void __NVIC_SetPendingIRQ(IRQn_Type IRQn) -{ - if ((int32_t)(IRQn) >= 0) - { - NVIC->ISPR[(((uint32_t)IRQn) >> 5UL)] = (uint32_t)(1UL << (((uint32_t)IRQn) & 0x1FUL)); - } -} - - -/** - \brief Clear Pending Interrupt - \details Clears the pending bit of a device specific interrupt in the NVIC pending register. - \param [in] IRQn Device specific interrupt number. - \note IRQn must not be negative. - */ -__STATIC_INLINE void __NVIC_ClearPendingIRQ(IRQn_Type IRQn) -{ - if ((int32_t)(IRQn) >= 0) - { - NVIC->ICPR[(((uint32_t)IRQn) >> 5UL)] = (uint32_t)(1UL << (((uint32_t)IRQn) & 0x1FUL)); - } -} - - -/** - \brief Get Active Interrupt - \details Reads the active register in the NVIC and returns the active bit for the device specific interrupt. - \param [in] IRQn Device specific interrupt number. - \return 0 Interrupt status is not active. - \return 1 Interrupt status is active. - \note IRQn must not be negative. - */ -__STATIC_INLINE uint32_t __NVIC_GetActive(IRQn_Type IRQn) -{ - if ((int32_t)(IRQn) >= 0) - { - return((uint32_t)(((NVIC->IABR[(((uint32_t)IRQn) >> 5UL)] & (1UL << (((uint32_t)IRQn) & 0x1FUL))) != 0UL) ? 1UL : 0UL)); - } - else - { - return(0U); - } -} - - -/** - \brief Set Interrupt Priority - \details Sets the priority of a device specific interrupt or a processor exception. - The interrupt number can be positive to specify a device specific interrupt, - or negative to specify a processor exception. - \param [in] IRQn Interrupt number. - \param [in] priority Priority to set. - \note The priority cannot be set for every processor exception. - */ -__STATIC_INLINE void __NVIC_SetPriority(IRQn_Type IRQn, uint32_t priority) -{ - if ((int32_t)(IRQn) >= 0) - { - NVIC->IP[((uint32_t)IRQn)] = (uint8_t)((priority << (8U - __NVIC_PRIO_BITS)) & (uint32_t)0xFFUL); - } - else - { - SCB->SHP[(((uint32_t)IRQn) & 0xFUL)-4UL] = (uint8_t)((priority << (8U - __NVIC_PRIO_BITS)) & (uint32_t)0xFFUL); - } -} - - -/** - \brief Get Interrupt Priority - \details Reads the priority of a device specific interrupt or a processor exception. - The interrupt number can be positive to specify a device specific interrupt, - or negative to specify a processor exception. - \param [in] IRQn Interrupt number. - \return Interrupt Priority. - Value is aligned automatically to the implemented priority bits of the microcontroller. - */ -__STATIC_INLINE uint32_t __NVIC_GetPriority(IRQn_Type IRQn) -{ - - if ((int32_t)(IRQn) >= 0) - { - return(((uint32_t)NVIC->IP[((uint32_t)IRQn)] >> (8U - __NVIC_PRIO_BITS))); - } - else - { - return(((uint32_t)SCB->SHP[(((uint32_t)IRQn) & 0xFUL)-4UL] >> (8U - __NVIC_PRIO_BITS))); - } -} - - -/** - \brief Encode Priority - \details Encodes the priority for an interrupt with the given priority group, - preemptive priority value, and subpriority value. - In case of a conflict between priority grouping and available - priority bits (__NVIC_PRIO_BITS), the smallest possible priority group is set. - \param [in] PriorityGroup Used priority group. - \param [in] PreemptPriority Preemptive priority value (starting from 0). - \param [in] SubPriority Subpriority value (starting from 0). - \return Encoded priority. Value can be used in the function \ref NVIC_SetPriority(). - */ -__STATIC_INLINE uint32_t NVIC_EncodePriority (uint32_t PriorityGroup, uint32_t PreemptPriority, uint32_t SubPriority) -{ - uint32_t PriorityGroupTmp = (PriorityGroup & (uint32_t)0x07UL); /* only values 0..7 are used */ - uint32_t PreemptPriorityBits; - uint32_t SubPriorityBits; - - PreemptPriorityBits = ((7UL - PriorityGroupTmp) > (uint32_t)(__NVIC_PRIO_BITS)) ? (uint32_t)(__NVIC_PRIO_BITS) : (uint32_t)(7UL - PriorityGroupTmp); - SubPriorityBits = ((PriorityGroupTmp + (uint32_t)(__NVIC_PRIO_BITS)) < (uint32_t)7UL) ? (uint32_t)0UL : (uint32_t)((PriorityGroupTmp - 7UL) + (uint32_t)(__NVIC_PRIO_BITS)); - - return ( - ((PreemptPriority & (uint32_t)((1UL << (PreemptPriorityBits)) - 1UL)) << SubPriorityBits) | - ((SubPriority & (uint32_t)((1UL << (SubPriorityBits )) - 1UL))) - ); -} - - -/** - \brief Decode Priority - \details Decodes an interrupt priority value with a given priority group to - preemptive priority value and subpriority value. - In case of a conflict between priority grouping and available - priority bits (__NVIC_PRIO_BITS) the smallest possible priority group is set. - \param [in] Priority Priority value, which can be retrieved with the function \ref NVIC_GetPriority(). - \param [in] PriorityGroup Used priority group. - \param [out] pPreemptPriority Preemptive priority value (starting from 0). - \param [out] pSubPriority Subpriority value (starting from 0). - */ -__STATIC_INLINE void NVIC_DecodePriority (uint32_t Priority, uint32_t PriorityGroup, uint32_t* const pPreemptPriority, uint32_t* const pSubPriority) -{ - uint32_t PriorityGroupTmp = (PriorityGroup & (uint32_t)0x07UL); /* only values 0..7 are used */ - uint32_t PreemptPriorityBits; - uint32_t SubPriorityBits; - - PreemptPriorityBits = ((7UL - PriorityGroupTmp) > (uint32_t)(__NVIC_PRIO_BITS)) ? (uint32_t)(__NVIC_PRIO_BITS) : (uint32_t)(7UL - PriorityGroupTmp); - SubPriorityBits = ((PriorityGroupTmp + (uint32_t)(__NVIC_PRIO_BITS)) < (uint32_t)7UL) ? (uint32_t)0UL : (uint32_t)((PriorityGroupTmp - 7UL) + (uint32_t)(__NVIC_PRIO_BITS)); - - *pPreemptPriority = (Priority >> SubPriorityBits) & (uint32_t)((1UL << (PreemptPriorityBits)) - 1UL); - *pSubPriority = (Priority ) & (uint32_t)((1UL << (SubPriorityBits )) - 1UL); -} - - -/** - \brief Set Interrupt Vector - \details Sets an interrupt vector in SRAM based interrupt vector table. - The interrupt number can be positive to specify a device specific interrupt, - or negative to specify a processor exception. - VTOR must been relocated to SRAM before. - \param [in] IRQn Interrupt number - \param [in] vector Address of interrupt handler function - */ -__STATIC_INLINE void __NVIC_SetVector(IRQn_Type IRQn, uint32_t vector) -{ - uint32_t *vectors = (uint32_t *)SCB->VTOR; - vectors[(int32_t)IRQn + NVIC_USER_IRQ_OFFSET] = vector; -} - - -/** - \brief Get Interrupt Vector - \details Reads an interrupt vector from interrupt vector table. - The interrupt number can be positive to specify a device specific interrupt, - or negative to specify a processor exception. - \param [in] IRQn Interrupt number. - \return Address of interrupt handler function - */ -__STATIC_INLINE uint32_t __NVIC_GetVector(IRQn_Type IRQn) -{ - uint32_t *vectors = (uint32_t *)SCB->VTOR; - return vectors[(int32_t)IRQn + NVIC_USER_IRQ_OFFSET]; -} - - -/** - \brief System Reset - \details Initiates a system reset request to reset the MCU. - */ -__NO_RETURN __STATIC_INLINE void __NVIC_SystemReset(void) -{ - __DSB(); /* Ensure all outstanding memory accesses included - buffered write are completed before reset */ - SCB->AIRCR = (uint32_t)((0x5FAUL << SCB_AIRCR_VECTKEY_Pos) | - (SCB->AIRCR & SCB_AIRCR_PRIGROUP_Msk) | - SCB_AIRCR_SYSRESETREQ_Msk ); /* Keep priority group unchanged */ - __DSB(); /* Ensure completion of memory access */ - - for(;;) /* wait until reset */ - { - __NOP(); - } -} - -/*@} end of CMSIS_Core_NVICFunctions */ - - -/* ########################## FPU functions #################################### */ -/** - \ingroup CMSIS_Core_FunctionInterface - \defgroup CMSIS_Core_FpuFunctions FPU Functions - \brief Function that provides FPU type. - @{ - */ - -/** - \brief get FPU type - \details returns the FPU type - \returns - - \b 0: No FPU - - \b 1: Single precision FPU - - \b 2: Double + Single precision FPU - */ -__STATIC_INLINE uint32_t SCB_GetFPUType(void) -{ - return 0U; /* No FPU */ -} - - -/*@} end of CMSIS_Core_FpuFunctions */ - - - -/* ################################## SysTick function ############################################ */ -/** - \ingroup CMSIS_Core_FunctionInterface - \defgroup CMSIS_Core_SysTickFunctions SysTick Functions - \brief Functions that configure the System. - @{ - */ - -#if defined (__Vendor_SysTickConfig) && (__Vendor_SysTickConfig == 0U) - -/** - \brief System Tick Configuration - \details Initializes the System Timer and its interrupt, and starts the System Tick Timer. - Counter is in free running mode to generate periodic interrupts. - \param [in] ticks Number of ticks between two interrupts. - \return 0 Function succeeded. - \return 1 Function failed. - \note When the variable __Vendor_SysTickConfig is set to 1, then the - function SysTick_Config is not included. In this case, the file device.h - must contain a vendor-specific implementation of this function. - */ -__STATIC_INLINE uint32_t SysTick_Config(uint32_t ticks) -{ - if ((ticks - 1UL) > SysTick_LOAD_RELOAD_Msk) - { - return (1UL); /* Reload value impossible */ - } - - SysTick->LOAD = (uint32_t)(ticks - 1UL); /* set reload register */ - NVIC_SetPriority (SysTick_IRQn, (1UL << __NVIC_PRIO_BITS) - 1UL); /* set Priority for Systick Interrupt */ - SysTick->VAL = 0UL; /* Load the SysTick Counter Value */ - SysTick->CTRL = SysTick_CTRL_CLKSOURCE_Msk | - SysTick_CTRL_TICKINT_Msk | - SysTick_CTRL_ENABLE_Msk; /* Enable SysTick IRQ and SysTick Timer */ - return (0UL); /* Function successful */ -} - -#endif - -/*@} end of CMSIS_Core_SysTickFunctions */ - - - -/* ##################################### Debug In/Output function ########################################### */ -/** - \ingroup CMSIS_Core_FunctionInterface - \defgroup CMSIS_core_DebugFunctions ITM Functions - \brief Functions that access the ITM debug interface. - @{ - */ - -extern volatile int32_t ITM_RxBuffer; /*!< External variable to receive characters. */ -#define ITM_RXBUFFER_EMPTY ((int32_t)0x5AA55AA5U) /*!< Value identifying \ref ITM_RxBuffer is ready for next character. */ - - -/** - \brief ITM Send Character - \details Transmits a character via the ITM channel 0, and - \li Just returns when no debugger is connected that has booked the output. - \li Is blocking when a debugger is connected, but the previous character sent has not been transmitted. - \param [in] ch Character to transmit. - \returns Character to transmit. - */ -__STATIC_INLINE uint32_t ITM_SendChar (uint32_t ch) -{ - if (((ITM->TCR & ITM_TCR_ITMENA_Msk) != 0UL) && /* ITM enabled */ - ((ITM->TER & 1UL ) != 0UL) ) /* ITM Port #0 enabled */ - { - while (ITM->PORT[0U].u32 == 0UL) - { - __NOP(); - } - ITM->PORT[0U].u8 = (uint8_t)ch; - } - return (ch); -} - - -/** - \brief ITM Receive Character - \details Inputs a character via the external variable \ref ITM_RxBuffer. - \return Received character. - \return -1 No character pending. - */ -__STATIC_INLINE int32_t ITM_ReceiveChar (void) -{ - int32_t ch = -1; /* no character available */ - - if (ITM_RxBuffer != ITM_RXBUFFER_EMPTY) - { - ch = ITM_RxBuffer; - ITM_RxBuffer = ITM_RXBUFFER_EMPTY; /* ready for next character */ - } - - return (ch); -} - - -/** - \brief ITM Check Character - \details Checks whether a character is pending for reading in the variable \ref ITM_RxBuffer. - \return 0 No character available. - \return 1 Character available. - */ -__STATIC_INLINE int32_t ITM_CheckChar (void) -{ - - if (ITM_RxBuffer == ITM_RXBUFFER_EMPTY) - { - return (0); /* no character available */ - } - else - { - return (1); /* character available */ - } -} - -/*@} end of CMSIS_core_DebugFunctions */ - - - - -#ifdef __cplusplus -} -#endif - -#endif /* __CORE_SC300_H_DEPENDANT */ - -#endif /* __CMSIS_GENERIC */ diff --git a/test_dma/Drivers/CMSIS/Include/mpu_armv7.h b/test_dma/Drivers/CMSIS/Include/mpu_armv7.h deleted file mode 100644 index 7d4b600..0000000 --- a/test_dma/Drivers/CMSIS/Include/mpu_armv7.h +++ /dev/null @@ -1,270 +0,0 @@ -/****************************************************************************** - * @file mpu_armv7.h - * @brief CMSIS MPU API for Armv7-M MPU - * @version V5.0.4 - * @date 10. January 2018 - ******************************************************************************/ -/* - * Copyright (c) 2017-2018 Arm Limited. All rights reserved. - * - * SPDX-License-Identifier: Apache-2.0 - * - * Licensed under the Apache License, Version 2.0 (the License); you may - * not use this file except in compliance with the License. - * You may obtain a copy of the License at - * - * www.apache.org/licenses/LICENSE-2.0 - * - * Unless required by applicable law or agreed to in writing, software - * distributed under the License is distributed on an AS IS BASIS, WITHOUT - * WARRANTIES OR CONDITIONS OF ANY KIND, either express or implied. - * See the License for the specific language governing permissions and - * limitations under the License. - */ - -#if defined ( __ICCARM__ ) - #pragma system_include /* treat file as system include file for MISRA check */ -#elif defined (__clang__) - #pragma clang system_header /* treat file as system include file */ -#endif - -#ifndef ARM_MPU_ARMV7_H -#define ARM_MPU_ARMV7_H - -#define ARM_MPU_REGION_SIZE_32B ((uint8_t)0x04U) ///!< MPU Region Size 32 Bytes -#define ARM_MPU_REGION_SIZE_64B ((uint8_t)0x05U) ///!< MPU Region Size 64 Bytes -#define ARM_MPU_REGION_SIZE_128B ((uint8_t)0x06U) ///!< MPU Region Size 128 Bytes -#define ARM_MPU_REGION_SIZE_256B ((uint8_t)0x07U) ///!< MPU Region Size 256 Bytes -#define ARM_MPU_REGION_SIZE_512B ((uint8_t)0x08U) ///!< MPU Region Size 512 Bytes -#define ARM_MPU_REGION_SIZE_1KB ((uint8_t)0x09U) ///!< MPU Region Size 1 KByte -#define ARM_MPU_REGION_SIZE_2KB ((uint8_t)0x0AU) ///!< MPU Region Size 2 KBytes -#define ARM_MPU_REGION_SIZE_4KB ((uint8_t)0x0BU) ///!< MPU Region Size 4 KBytes -#define ARM_MPU_REGION_SIZE_8KB ((uint8_t)0x0CU) ///!< MPU Region Size 8 KBytes -#define ARM_MPU_REGION_SIZE_16KB ((uint8_t)0x0DU) ///!< MPU Region Size 16 KBytes -#define ARM_MPU_REGION_SIZE_32KB ((uint8_t)0x0EU) ///!< MPU Region Size 32 KBytes -#define ARM_MPU_REGION_SIZE_64KB ((uint8_t)0x0FU) ///!< MPU Region Size 64 KBytes -#define ARM_MPU_REGION_SIZE_128KB ((uint8_t)0x10U) ///!< MPU Region Size 128 KBytes -#define ARM_MPU_REGION_SIZE_256KB ((uint8_t)0x11U) ///!< MPU Region Size 256 KBytes -#define ARM_MPU_REGION_SIZE_512KB ((uint8_t)0x12U) ///!< MPU Region Size 512 KBytes -#define ARM_MPU_REGION_SIZE_1MB ((uint8_t)0x13U) ///!< MPU Region Size 1 MByte -#define ARM_MPU_REGION_SIZE_2MB ((uint8_t)0x14U) ///!< MPU Region Size 2 MBytes -#define ARM_MPU_REGION_SIZE_4MB ((uint8_t)0x15U) ///!< MPU Region Size 4 MBytes -#define ARM_MPU_REGION_SIZE_8MB ((uint8_t)0x16U) ///!< MPU Region Size 8 MBytes -#define ARM_MPU_REGION_SIZE_16MB ((uint8_t)0x17U) ///!< MPU Region Size 16 MBytes -#define ARM_MPU_REGION_SIZE_32MB ((uint8_t)0x18U) ///!< MPU Region Size 32 MBytes -#define ARM_MPU_REGION_SIZE_64MB ((uint8_t)0x19U) ///!< MPU Region Size 64 MBytes -#define ARM_MPU_REGION_SIZE_128MB ((uint8_t)0x1AU) ///!< MPU Region Size 128 MBytes -#define ARM_MPU_REGION_SIZE_256MB ((uint8_t)0x1BU) ///!< MPU Region Size 256 MBytes -#define ARM_MPU_REGION_SIZE_512MB ((uint8_t)0x1CU) ///!< MPU Region Size 512 MBytes -#define ARM_MPU_REGION_SIZE_1GB ((uint8_t)0x1DU) ///!< MPU Region Size 1 GByte -#define ARM_MPU_REGION_SIZE_2GB ((uint8_t)0x1EU) ///!< MPU Region Size 2 GBytes -#define ARM_MPU_REGION_SIZE_4GB ((uint8_t)0x1FU) ///!< MPU Region Size 4 GBytes - -#define ARM_MPU_AP_NONE 0U ///!< MPU Access Permission no access -#define ARM_MPU_AP_PRIV 1U ///!< MPU Access Permission privileged access only -#define ARM_MPU_AP_URO 2U ///!< MPU Access Permission unprivileged access read-only -#define ARM_MPU_AP_FULL 3U ///!< MPU Access Permission full access -#define ARM_MPU_AP_PRO 5U ///!< MPU Access Permission privileged access read-only -#define ARM_MPU_AP_RO 6U ///!< MPU Access Permission read-only access - -/** MPU Region Base Address Register Value -* -* \param Region The region to be configured, number 0 to 15. -* \param BaseAddress The base address for the region. -*/ -#define ARM_MPU_RBAR(Region, BaseAddress) \ - (((BaseAddress) & MPU_RBAR_ADDR_Msk) | \ - ((Region) & MPU_RBAR_REGION_Msk) | \ - (MPU_RBAR_VALID_Msk)) - -/** -* MPU Memory Access Attributes -* -* \param TypeExtField Type extension field, allows you to configure memory access type, for example strongly ordered, peripheral. -* \param IsShareable Region is shareable between multiple bus masters. -* \param IsCacheable Region is cacheable, i.e. its value may be kept in cache. -* \param IsBufferable Region is bufferable, i.e. using write-back caching. Cacheable but non-bufferable regions use write-through policy. -*/ -#define ARM_MPU_ACCESS_(TypeExtField, IsShareable, IsCacheable, IsBufferable) \ - ((((TypeExtField ) << MPU_RASR_TEX_Pos) & MPU_RASR_TEX_Msk) | \ - (((IsShareable ) << MPU_RASR_S_Pos) & MPU_RASR_S_Msk) | \ - (((IsCacheable ) << MPU_RASR_C_Pos) & MPU_RASR_C_Msk) | \ - (((IsBufferable ) << MPU_RASR_B_Pos) & MPU_RASR_B_Msk)) - -/** -* MPU Region Attribute and Size Register Value -* -* \param DisableExec Instruction access disable bit, 1= disable instruction fetches. -* \param AccessPermission Data access permissions, allows you to configure read/write access for User and Privileged mode. -* \param AccessAttributes Memory access attribution, see \ref ARM_MPU_ACCESS_. -* \param SubRegionDisable Sub-region disable field. -* \param Size Region size of the region to be configured, for example 4K, 8K. -*/ -#define ARM_MPU_RASR_EX(DisableExec, AccessPermission, AccessAttributes, SubRegionDisable, Size) \ - ((((DisableExec ) << MPU_RASR_XN_Pos) & MPU_RASR_XN_Msk) | \ - (((AccessPermission) << MPU_RASR_AP_Pos) & MPU_RASR_AP_Msk) | \ - (((AccessAttributes) ) & (MPU_RASR_TEX_Msk | MPU_RASR_S_Msk | MPU_RASR_C_Msk | MPU_RASR_B_Msk))) - -/** -* MPU Region Attribute and Size Register Value -* -* \param DisableExec Instruction access disable bit, 1= disable instruction fetches. -* \param AccessPermission Data access permissions, allows you to configure read/write access for User and Privileged mode. -* \param TypeExtField Type extension field, allows you to configure memory access type, for example strongly ordered, peripheral. -* \param IsShareable Region is shareable between multiple bus masters. -* \param IsCacheable Region is cacheable, i.e. its value may be kept in cache. -* \param IsBufferable Region is bufferable, i.e. using write-back caching. Cacheable but non-bufferable regions use write-through policy. -* \param SubRegionDisable Sub-region disable field. -* \param Size Region size of the region to be configured, for example 4K, 8K. -*/ -#define ARM_MPU_RASR(DisableExec, AccessPermission, TypeExtField, IsShareable, IsCacheable, IsBufferable, SubRegionDisable, Size) \ - ARM_MPU_RASR_EX(DisableExec, AccessPermission, ARM_MPU_ACCESS_(TypeExtField, IsShareable, IsCacheable, IsBufferable), SubRegionDisable, Size) - -/** -* MPU Memory Access Attribute for strongly ordered memory. -* - TEX: 000b -* - Shareable -* - Non-cacheable -* - Non-bufferable -*/ -#define ARM_MPU_ACCESS_ORDERED ARM_MPU_ACCESS_(0U, 1U, 0U, 0U) - -/** -* MPU Memory Access Attribute for device memory. -* - TEX: 000b (if non-shareable) or 010b (if shareable) -* - Shareable or non-shareable -* - Non-cacheable -* - Bufferable (if shareable) or non-bufferable (if non-shareable) -* -* \param IsShareable Configures the device memory as shareable or non-shareable. -*/ -#define ARM_MPU_ACCESS_DEVICE(IsShareable) ((IsShareable) ? ARM_MPU_ACCESS_(0U, 1U, 0U, 1U) : ARM_MPU_ACCESS_(2U, 0U, 0U, 0U)) - -/** -* MPU Memory Access Attribute for normal memory. -* - TEX: 1BBb (reflecting outer cacheability rules) -* - Shareable or non-shareable -* - Cacheable or non-cacheable (reflecting inner cacheability rules) -* - Bufferable or non-bufferable (reflecting inner cacheability rules) -* -* \param OuterCp Configures the outer cache policy. -* \param InnerCp Configures the inner cache policy. -* \param IsShareable Configures the memory as shareable or non-shareable. -*/ -#define ARM_MPU_ACCESS_NORMAL(OuterCp, InnerCp, IsShareable) ARM_MPU_ACCESS_((4U | (OuterCp)), IsShareable, ((InnerCp) & 2U), ((InnerCp) & 1U)) - -/** -* MPU Memory Access Attribute non-cacheable policy. -*/ -#define ARM_MPU_CACHEP_NOCACHE 0U - -/** -* MPU Memory Access Attribute write-back, write and read allocate policy. -*/ -#define ARM_MPU_CACHEP_WB_WRA 1U - -/** -* MPU Memory Access Attribute write-through, no write allocate policy. -*/ -#define ARM_MPU_CACHEP_WT_NWA 2U - -/** -* MPU Memory Access Attribute write-back, no write allocate policy. -*/ -#define ARM_MPU_CACHEP_WB_NWA 3U - - -/** -* Struct for a single MPU Region -*/ -typedef struct { - uint32_t RBAR; //!< The region base address register value (RBAR) - uint32_t RASR; //!< The region attribute and size register value (RASR) \ref MPU_RASR -} ARM_MPU_Region_t; - -/** Enable the MPU. -* \param MPU_Control Default access permissions for unconfigured regions. -*/ -__STATIC_INLINE void ARM_MPU_Enable(uint32_t MPU_Control) -{ - __DSB(); - __ISB(); - MPU->CTRL = MPU_Control | MPU_CTRL_ENABLE_Msk; -#ifdef SCB_SHCSR_MEMFAULTENA_Msk - SCB->SHCSR |= SCB_SHCSR_MEMFAULTENA_Msk; -#endif -} - -/** Disable the MPU. -*/ -__STATIC_INLINE void ARM_MPU_Disable(void) -{ - __DSB(); - __ISB(); -#ifdef SCB_SHCSR_MEMFAULTENA_Msk - SCB->SHCSR &= ~SCB_SHCSR_MEMFAULTENA_Msk; -#endif - MPU->CTRL &= ~MPU_CTRL_ENABLE_Msk; -} - -/** Clear and disable the given MPU region. -* \param rnr Region number to be cleared. -*/ -__STATIC_INLINE void ARM_MPU_ClrRegion(uint32_t rnr) -{ - MPU->RNR = rnr; - MPU->RASR = 0U; -} - -/** Configure an MPU region. -* \param rbar Value for RBAR register. -* \param rsar Value for RSAR register. -*/ -__STATIC_INLINE void ARM_MPU_SetRegion(uint32_t rbar, uint32_t rasr) -{ - MPU->RBAR = rbar; - MPU->RASR = rasr; -} - -/** Configure the given MPU region. -* \param rnr Region number to be configured. -* \param rbar Value for RBAR register. -* \param rsar Value for RSAR register. -*/ -__STATIC_INLINE void ARM_MPU_SetRegionEx(uint32_t rnr, uint32_t rbar, uint32_t rasr) -{ - MPU->RNR = rnr; - MPU->RBAR = rbar; - MPU->RASR = rasr; -} - -/** Memcopy with strictly ordered memory access, e.g. for register targets. -* \param dst Destination data is copied to. -* \param src Source data is copied from. -* \param len Amount of data words to be copied. -*/ -__STATIC_INLINE void orderedCpy(volatile uint32_t* dst, const uint32_t* __RESTRICT src, uint32_t len) -{ - uint32_t i; - for (i = 0U; i < len; ++i) - { - dst[i] = src[i]; - } -} - -/** Load the given number of MPU regions from a table. -* \param table Pointer to the MPU configuration table. -* \param cnt Amount of regions to be configured. -*/ -__STATIC_INLINE void ARM_MPU_Load(ARM_MPU_Region_t const* table, uint32_t cnt) -{ - const uint32_t rowWordSize = sizeof(ARM_MPU_Region_t)/4U; - while (cnt > MPU_TYPE_RALIASES) { - orderedCpy(&(MPU->RBAR), &(table->RBAR), MPU_TYPE_RALIASES*rowWordSize); - table += MPU_TYPE_RALIASES; - cnt -= MPU_TYPE_RALIASES; - } - orderedCpy(&(MPU->RBAR), &(table->RBAR), cnt*rowWordSize); -} - -#endif diff --git a/test_dma/Drivers/CMSIS/Include/mpu_armv8.h b/test_dma/Drivers/CMSIS/Include/mpu_armv8.h deleted file mode 100644 index 99ee9f9..0000000 --- a/test_dma/Drivers/CMSIS/Include/mpu_armv8.h +++ /dev/null @@ -1,333 +0,0 @@ -/****************************************************************************** - * @file mpu_armv8.h - * @brief CMSIS MPU API for Armv8-M MPU - * @version V5.0.4 - * @date 10. January 2018 - ******************************************************************************/ -/* - * Copyright (c) 2017-2018 Arm Limited. All rights reserved. - * - * SPDX-License-Identifier: Apache-2.0 - * - * Licensed under the Apache License, Version 2.0 (the License); you may - * not use this file except in compliance with the License. - * You may obtain a copy of the License at - * - * www.apache.org/licenses/LICENSE-2.0 - * - * Unless required by applicable law or agreed to in writing, software - * distributed under the License is distributed on an AS IS BASIS, WITHOUT - * WARRANTIES OR CONDITIONS OF ANY KIND, either express or implied. - * See the License for the specific language governing permissions and - * limitations under the License. - */ - -#if defined ( __ICCARM__ ) - #pragma system_include /* treat file as system include file for MISRA check */ -#elif defined (__clang__) - #pragma clang system_header /* treat file as system include file */ -#endif - -#ifndef ARM_MPU_ARMV8_H -#define ARM_MPU_ARMV8_H - -/** \brief Attribute for device memory (outer only) */ -#define ARM_MPU_ATTR_DEVICE ( 0U ) - -/** \brief Attribute for non-cacheable, normal memory */ -#define ARM_MPU_ATTR_NON_CACHEABLE ( 4U ) - -/** \brief Attribute for normal memory (outer and inner) -* \param NT Non-Transient: Set to 1 for non-transient data. -* \param WB Write-Back: Set to 1 to use write-back update policy. -* \param RA Read Allocation: Set to 1 to use cache allocation on read miss. -* \param WA Write Allocation: Set to 1 to use cache allocation on write miss. -*/ -#define ARM_MPU_ATTR_MEMORY_(NT, WB, RA, WA) \ - (((NT & 1U) << 3U) | ((WB & 1U) << 2U) | ((RA & 1U) << 1U) | (WA & 1U)) - -/** \brief Device memory type non Gathering, non Re-ordering, non Early Write Acknowledgement */ -#define ARM_MPU_ATTR_DEVICE_nGnRnE (0U) - -/** \brief Device memory type non Gathering, non Re-ordering, Early Write Acknowledgement */ -#define ARM_MPU_ATTR_DEVICE_nGnRE (1U) - -/** \brief Device memory type non Gathering, Re-ordering, Early Write Acknowledgement */ -#define ARM_MPU_ATTR_DEVICE_nGRE (2U) - -/** \brief Device memory type Gathering, Re-ordering, Early Write Acknowledgement */ -#define ARM_MPU_ATTR_DEVICE_GRE (3U) - -/** \brief Memory Attribute -* \param O Outer memory attributes -* \param I O == ARM_MPU_ATTR_DEVICE: Device memory attributes, else: Inner memory attributes -*/ -#define ARM_MPU_ATTR(O, I) (((O & 0xFU) << 4U) | (((O & 0xFU) != 0U) ? (I & 0xFU) : ((I & 0x3U) << 2U))) - -/** \brief Normal memory non-shareable */ -#define ARM_MPU_SH_NON (0U) - -/** \brief Normal memory outer shareable */ -#define ARM_MPU_SH_OUTER (2U) - -/** \brief Normal memory inner shareable */ -#define ARM_MPU_SH_INNER (3U) - -/** \brief Memory access permissions -* \param RO Read-Only: Set to 1 for read-only memory. -* \param NP Non-Privileged: Set to 1 for non-privileged memory. -*/ -#define ARM_MPU_AP_(RO, NP) (((RO & 1U) << 1U) | (NP & 1U)) - -/** \brief Region Base Address Register value -* \param BASE The base address bits [31:5] of a memory region. The value is zero extended. Effective address gets 32 byte aligned. -* \param SH Defines the Shareability domain for this memory region. -* \param RO Read-Only: Set to 1 for a read-only memory region. -* \param NP Non-Privileged: Set to 1 for a non-privileged memory region. -* \oaram XN eXecute Never: Set to 1 for a non-executable memory region. -*/ -#define ARM_MPU_RBAR(BASE, SH, RO, NP, XN) \ - ((BASE & MPU_RBAR_BASE_Msk) | \ - ((SH << MPU_RBAR_SH_Pos) & MPU_RBAR_SH_Msk) | \ - ((ARM_MPU_AP_(RO, NP) << MPU_RBAR_AP_Pos) & MPU_RBAR_AP_Msk) | \ - ((XN << MPU_RBAR_XN_Pos) & MPU_RBAR_XN_Msk)) - -/** \brief Region Limit Address Register value -* \param LIMIT The limit address bits [31:5] for this memory region. The value is one extended. -* \param IDX The attribute index to be associated with this memory region. -*/ -#define ARM_MPU_RLAR(LIMIT, IDX) \ - ((LIMIT & MPU_RLAR_LIMIT_Msk) | \ - ((IDX << MPU_RLAR_AttrIndx_Pos) & MPU_RLAR_AttrIndx_Msk) | \ - (MPU_RLAR_EN_Msk)) - -/** -* Struct for a single MPU Region -*/ -typedef struct { - uint32_t RBAR; /*!< Region Base Address Register value */ - uint32_t RLAR; /*!< Region Limit Address Register value */ -} ARM_MPU_Region_t; - -/** Enable the MPU. -* \param MPU_Control Default access permissions for unconfigured regions. -*/ -__STATIC_INLINE void ARM_MPU_Enable(uint32_t MPU_Control) -{ - __DSB(); - __ISB(); - MPU->CTRL = MPU_Control | MPU_CTRL_ENABLE_Msk; -#ifdef SCB_SHCSR_MEMFAULTENA_Msk - SCB->SHCSR |= SCB_SHCSR_MEMFAULTENA_Msk; -#endif -} - -/** Disable the MPU. -*/ -__STATIC_INLINE void ARM_MPU_Disable(void) -{ - __DSB(); - __ISB(); -#ifdef SCB_SHCSR_MEMFAULTENA_Msk - SCB->SHCSR &= ~SCB_SHCSR_MEMFAULTENA_Msk; -#endif - MPU->CTRL &= ~MPU_CTRL_ENABLE_Msk; -} - -#ifdef MPU_NS -/** Enable the Non-secure MPU. -* \param MPU_Control Default access permissions for unconfigured regions. -*/ -__STATIC_INLINE void ARM_MPU_Enable_NS(uint32_t MPU_Control) -{ - __DSB(); - __ISB(); - MPU_NS->CTRL = MPU_Control | MPU_CTRL_ENABLE_Msk; -#ifdef SCB_SHCSR_MEMFAULTENA_Msk - SCB_NS->SHCSR |= SCB_SHCSR_MEMFAULTENA_Msk; -#endif -} - -/** Disable the Non-secure MPU. -*/ -__STATIC_INLINE void ARM_MPU_Disable_NS(void) -{ - __DSB(); - __ISB(); -#ifdef SCB_SHCSR_MEMFAULTENA_Msk - SCB_NS->SHCSR &= ~SCB_SHCSR_MEMFAULTENA_Msk; -#endif - MPU_NS->CTRL &= ~MPU_CTRL_ENABLE_Msk; -} -#endif - -/** Set the memory attribute encoding to the given MPU. -* \param mpu Pointer to the MPU to be configured. -* \param idx The attribute index to be set [0-7] -* \param attr The attribute value to be set. -*/ -__STATIC_INLINE void ARM_MPU_SetMemAttrEx(MPU_Type* mpu, uint8_t idx, uint8_t attr) -{ - const uint8_t reg = idx / 4U; - const uint32_t pos = ((idx % 4U) * 8U); - const uint32_t mask = 0xFFU << pos; - - if (reg >= (sizeof(mpu->MAIR) / sizeof(mpu->MAIR[0]))) { - return; // invalid index - } - - mpu->MAIR[reg] = ((mpu->MAIR[reg] & ~mask) | ((attr << pos) & mask)); -} - -/** Set the memory attribute encoding. -* \param idx The attribute index to be set [0-7] -* \param attr The attribute value to be set. -*/ -__STATIC_INLINE void ARM_MPU_SetMemAttr(uint8_t idx, uint8_t attr) -{ - ARM_MPU_SetMemAttrEx(MPU, idx, attr); -} - -#ifdef MPU_NS -/** Set the memory attribute encoding to the Non-secure MPU. -* \param idx The attribute index to be set [0-7] -* \param attr The attribute value to be set. -*/ -__STATIC_INLINE void ARM_MPU_SetMemAttr_NS(uint8_t idx, uint8_t attr) -{ - ARM_MPU_SetMemAttrEx(MPU_NS, idx, attr); -} -#endif - -/** Clear and disable the given MPU region of the given MPU. -* \param mpu Pointer to MPU to be used. -* \param rnr Region number to be cleared. -*/ -__STATIC_INLINE void ARM_MPU_ClrRegionEx(MPU_Type* mpu, uint32_t rnr) -{ - mpu->RNR = rnr; - mpu->RLAR = 0U; -} - -/** Clear and disable the given MPU region. -* \param rnr Region number to be cleared. -*/ -__STATIC_INLINE void ARM_MPU_ClrRegion(uint32_t rnr) -{ - ARM_MPU_ClrRegionEx(MPU, rnr); -} - -#ifdef MPU_NS -/** Clear and disable the given Non-secure MPU region. -* \param rnr Region number to be cleared. -*/ -__STATIC_INLINE void ARM_MPU_ClrRegion_NS(uint32_t rnr) -{ - ARM_MPU_ClrRegionEx(MPU_NS, rnr); -} -#endif - -/** Configure the given MPU region of the given MPU. -* \param mpu Pointer to MPU to be used. -* \param rnr Region number to be configured. -* \param rbar Value for RBAR register. -* \param rlar Value for RLAR register. -*/ -__STATIC_INLINE void ARM_MPU_SetRegionEx(MPU_Type* mpu, uint32_t rnr, uint32_t rbar, uint32_t rlar) -{ - mpu->RNR = rnr; - mpu->RBAR = rbar; - mpu->RLAR = rlar; -} - -/** Configure the given MPU region. -* \param rnr Region number to be configured. -* \param rbar Value for RBAR register. -* \param rlar Value for RLAR register. -*/ -__STATIC_INLINE void ARM_MPU_SetRegion(uint32_t rnr, uint32_t rbar, uint32_t rlar) -{ - ARM_MPU_SetRegionEx(MPU, rnr, rbar, rlar); -} - -#ifdef MPU_NS -/** Configure the given Non-secure MPU region. -* \param rnr Region number to be configured. -* \param rbar Value for RBAR register. -* \param rlar Value for RLAR register. -*/ -__STATIC_INLINE void ARM_MPU_SetRegion_NS(uint32_t rnr, uint32_t rbar, uint32_t rlar) -{ - ARM_MPU_SetRegionEx(MPU_NS, rnr, rbar, rlar); -} -#endif - -/** Memcopy with strictly ordered memory access, e.g. for register targets. -* \param dst Destination data is copied to. -* \param src Source data is copied from. -* \param len Amount of data words to be copied. -*/ -__STATIC_INLINE void orderedCpy(volatile uint32_t* dst, const uint32_t* __RESTRICT src, uint32_t len) -{ - uint32_t i; - for (i = 0U; i < len; ++i) - { - dst[i] = src[i]; - } -} - -/** Load the given number of MPU regions from a table to the given MPU. -* \param mpu Pointer to the MPU registers to be used. -* \param rnr First region number to be configured. -* \param table Pointer to the MPU configuration table. -* \param cnt Amount of regions to be configured. -*/ -__STATIC_INLINE void ARM_MPU_LoadEx(MPU_Type* mpu, uint32_t rnr, ARM_MPU_Region_t const* table, uint32_t cnt) -{ - const uint32_t rowWordSize = sizeof(ARM_MPU_Region_t)/4U; - if (cnt == 1U) { - mpu->RNR = rnr; - orderedCpy(&(mpu->RBAR), &(table->RBAR), rowWordSize); - } else { - uint32_t rnrBase = rnr & ~(MPU_TYPE_RALIASES-1U); - uint32_t rnrOffset = rnr % MPU_TYPE_RALIASES; - - mpu->RNR = rnrBase; - while ((rnrOffset + cnt) > MPU_TYPE_RALIASES) { - uint32_t c = MPU_TYPE_RALIASES - rnrOffset; - orderedCpy(&(mpu->RBAR)+(rnrOffset*2U), &(table->RBAR), c*rowWordSize); - table += c; - cnt -= c; - rnrOffset = 0U; - rnrBase += MPU_TYPE_RALIASES; - mpu->RNR = rnrBase; - } - - orderedCpy(&(mpu->RBAR)+(rnrOffset*2U), &(table->RBAR), cnt*rowWordSize); - } -} - -/** Load the given number of MPU regions from a table. -* \param rnr First region number to be configured. -* \param table Pointer to the MPU configuration table. -* \param cnt Amount of regions to be configured. -*/ -__STATIC_INLINE void ARM_MPU_Load(uint32_t rnr, ARM_MPU_Region_t const* table, uint32_t cnt) -{ - ARM_MPU_LoadEx(MPU, rnr, table, cnt); -} - -#ifdef MPU_NS -/** Load the given number of MPU regions from a table to the Non-secure MPU. -* \param rnr First region number to be configured. -* \param table Pointer to the MPU configuration table. -* \param cnt Amount of regions to be configured. -*/ -__STATIC_INLINE void ARM_MPU_Load_NS(uint32_t rnr, ARM_MPU_Region_t const* table, uint32_t cnt) -{ - ARM_MPU_LoadEx(MPU_NS, rnr, table, cnt); -} -#endif - -#endif - diff --git a/test_dma/Drivers/CMSIS/Include/tz_context.h b/test_dma/Drivers/CMSIS/Include/tz_context.h deleted file mode 100644 index d4c1474..0000000 --- a/test_dma/Drivers/CMSIS/Include/tz_context.h +++ /dev/null @@ -1,70 +0,0 @@ -/****************************************************************************** - * @file tz_context.h - * @brief Context Management for Armv8-M TrustZone - * @version V1.0.1 - * @date 10. January 2018 - ******************************************************************************/ -/* - * Copyright (c) 2017-2018 Arm Limited. All rights reserved. - * - * SPDX-License-Identifier: Apache-2.0 - * - * Licensed under the Apache License, Version 2.0 (the License); you may - * not use this file except in compliance with the License. - * You may obtain a copy of the License at - * - * www.apache.org/licenses/LICENSE-2.0 - * - * Unless required by applicable law or agreed to in writing, software - * distributed under the License is distributed on an AS IS BASIS, WITHOUT - * WARRANTIES OR CONDITIONS OF ANY KIND, either express or implied. - * See the License for the specific language governing permissions and - * limitations under the License. - */ - -#if defined ( __ICCARM__ ) - #pragma system_include /* treat file as system include file for MISRA check */ -#elif defined (__clang__) - #pragma clang system_header /* treat file as system include file */ -#endif - -#ifndef TZ_CONTEXT_H -#define TZ_CONTEXT_H - -#include - -#ifndef TZ_MODULEID_T -#define TZ_MODULEID_T -/// \details Data type that identifies secure software modules called by a process. -typedef uint32_t TZ_ModuleId_t; -#endif - -/// \details TZ Memory ID identifies an allocated memory slot. -typedef uint32_t TZ_MemoryId_t; - -/// Initialize secure context memory system -/// \return execution status (1: success, 0: error) -uint32_t TZ_InitContextSystem_S (void); - -/// Allocate context memory for calling secure software modules in TrustZone -/// \param[in] module identifies software modules called from non-secure mode -/// \return value != 0 id TrustZone memory slot identifier -/// \return value 0 no memory available or internal error -TZ_MemoryId_t TZ_AllocModuleContext_S (TZ_ModuleId_t module); - -/// Free context memory that was previously allocated with \ref TZ_AllocModuleContext_S -/// \param[in] id TrustZone memory slot identifier -/// \return execution status (1: success, 0: error) -uint32_t TZ_FreeModuleContext_S (TZ_MemoryId_t id); - -/// Load secure context (called on RTOS thread context switch) -/// \param[in] id TrustZone memory slot identifier -/// \return execution status (1: success, 0: error) -uint32_t TZ_LoadContext_S (TZ_MemoryId_t id); - -/// Store secure context (called on RTOS thread context switch) -/// \param[in] id TrustZone memory slot identifier -/// \return execution status (1: success, 0: error) -uint32_t TZ_StoreContext_S (TZ_MemoryId_t id); - -#endif // TZ_CONTEXT_H diff --git a/test_dma/Drivers/STM32F7xx_HAL_Driver/Inc/Legacy/stm32_hal_legacy.h b/test_dma/Drivers/STM32F7xx_HAL_Driver/Inc/Legacy/stm32_hal_legacy.h deleted file mode 100644 index 13b68bc..0000000 --- a/test_dma/Drivers/STM32F7xx_HAL_Driver/Inc/Legacy/stm32_hal_legacy.h +++ /dev/null @@ -1,3451 +0,0 @@ -/** - ****************************************************************************** - * @file stm32_hal_legacy.h - * @author MCD Application Team - * @brief This file contains aliases definition for the STM32Cube HAL constants - * macros and functions maintained for legacy purpose. - ****************************************************************************** - * @attention - * - *

© Copyright (c) 2018 STMicroelectronics. - * All rights reserved.

- * - * This software component is licensed by ST under BSD 3-Clause license, - * the "License"; You may not use this file except in compliance with the - * License. You may obtain a copy of the License at: - * opensource.org/licenses/BSD-3-Clause - * - ****************************************************************************** - */ - -/* Define to prevent recursive inclusion -------------------------------------*/ -#ifndef STM32_HAL_LEGACY -#define STM32_HAL_LEGACY - -#ifdef __cplusplus - extern "C" { -#endif - -/* Includes ------------------------------------------------------------------*/ -/* Exported types ------------------------------------------------------------*/ -/* Exported constants --------------------------------------------------------*/ - -/** @defgroup HAL_AES_Aliased_Defines HAL CRYP Aliased Defines maintained for legacy purpose - * @{ - */ -#define AES_FLAG_RDERR CRYP_FLAG_RDERR -#define AES_FLAG_WRERR CRYP_FLAG_WRERR -#define AES_CLEARFLAG_CCF CRYP_CLEARFLAG_CCF -#define AES_CLEARFLAG_RDERR CRYP_CLEARFLAG_RDERR -#define AES_CLEARFLAG_WRERR CRYP_CLEARFLAG_WRERR - -/** - * @} - */ - -/** @defgroup HAL_ADC_Aliased_Defines HAL ADC Aliased Defines maintained for legacy purpose - * @{ - */ -#define ADC_RESOLUTION12b ADC_RESOLUTION_12B -#define ADC_RESOLUTION10b ADC_RESOLUTION_10B -#define ADC_RESOLUTION8b ADC_RESOLUTION_8B -#define ADC_RESOLUTION6b ADC_RESOLUTION_6B -#define OVR_DATA_OVERWRITTEN ADC_OVR_DATA_OVERWRITTEN -#define OVR_DATA_PRESERVED ADC_OVR_DATA_PRESERVED -#define EOC_SINGLE_CONV ADC_EOC_SINGLE_CONV -#define EOC_SEQ_CONV ADC_EOC_SEQ_CONV -#define EOC_SINGLE_SEQ_CONV ADC_EOC_SINGLE_SEQ_CONV -#define REGULAR_GROUP ADC_REGULAR_GROUP -#define INJECTED_GROUP ADC_INJECTED_GROUP -#define REGULAR_INJECTED_GROUP ADC_REGULAR_INJECTED_GROUP -#define AWD_EVENT ADC_AWD_EVENT -#define AWD1_EVENT ADC_AWD1_EVENT -#define AWD2_EVENT ADC_AWD2_EVENT -#define AWD3_EVENT ADC_AWD3_EVENT -#define OVR_EVENT ADC_OVR_EVENT -#define JQOVF_EVENT ADC_JQOVF_EVENT -#define ALL_CHANNELS ADC_ALL_CHANNELS -#define REGULAR_CHANNELS ADC_REGULAR_CHANNELS -#define INJECTED_CHANNELS ADC_INJECTED_CHANNELS -#define SYSCFG_FLAG_SENSOR_ADC ADC_FLAG_SENSOR -#define SYSCFG_FLAG_VREF_ADC ADC_FLAG_VREFINT -#define ADC_CLOCKPRESCALER_PCLK_DIV1 ADC_CLOCK_SYNC_PCLK_DIV1 -#define ADC_CLOCKPRESCALER_PCLK_DIV2 ADC_CLOCK_SYNC_PCLK_DIV2 -#define ADC_CLOCKPRESCALER_PCLK_DIV4 ADC_CLOCK_SYNC_PCLK_DIV4 -#define ADC_CLOCKPRESCALER_PCLK_DIV6 ADC_CLOCK_SYNC_PCLK_DIV6 -#define ADC_CLOCKPRESCALER_PCLK_DIV8 ADC_CLOCK_SYNC_PCLK_DIV8 -#define ADC_EXTERNALTRIG0_T6_TRGO ADC_EXTERNALTRIGCONV_T6_TRGO -#define ADC_EXTERNALTRIG1_T21_CC2 ADC_EXTERNALTRIGCONV_T21_CC2 -#define ADC_EXTERNALTRIG2_T2_TRGO ADC_EXTERNALTRIGCONV_T2_TRGO -#define ADC_EXTERNALTRIG3_T2_CC4 ADC_EXTERNALTRIGCONV_T2_CC4 -#define ADC_EXTERNALTRIG4_T22_TRGO ADC_EXTERNALTRIGCONV_T22_TRGO -#define ADC_EXTERNALTRIG7_EXT_IT11 ADC_EXTERNALTRIGCONV_EXT_IT11 -#define ADC_CLOCK_ASYNC ADC_CLOCK_ASYNC_DIV1 -#define ADC_EXTERNALTRIG_EDGE_NONE ADC_EXTERNALTRIGCONVEDGE_NONE -#define ADC_EXTERNALTRIG_EDGE_RISING ADC_EXTERNALTRIGCONVEDGE_RISING -#define ADC_EXTERNALTRIG_EDGE_FALLING ADC_EXTERNALTRIGCONVEDGE_FALLING -#define ADC_EXTERNALTRIG_EDGE_RISINGFALLING ADC_EXTERNALTRIGCONVEDGE_RISINGFALLING -#define ADC_SAMPLETIME_2CYCLE_5 ADC_SAMPLETIME_2CYCLES_5 - -#define HAL_ADC_STATE_BUSY_REG HAL_ADC_STATE_REG_BUSY -#define HAL_ADC_STATE_BUSY_INJ HAL_ADC_STATE_INJ_BUSY -#define HAL_ADC_STATE_EOC_REG HAL_ADC_STATE_REG_EOC -#define HAL_ADC_STATE_EOC_INJ HAL_ADC_STATE_INJ_EOC -#define HAL_ADC_STATE_ERROR HAL_ADC_STATE_ERROR_INTERNAL -#define HAL_ADC_STATE_BUSY HAL_ADC_STATE_BUSY_INTERNAL -#define HAL_ADC_STATE_AWD HAL_ADC_STATE_AWD1 - -#if defined(STM32H7) -#define ADC_CHANNEL_VBAT_DIV4 ADC_CHANNEL_VBAT -#endif /* STM32H7 */ -/** - * @} - */ - -/** @defgroup HAL_CEC_Aliased_Defines HAL CEC Aliased Defines maintained for legacy purpose - * @{ - */ - -#define __HAL_CEC_GET_IT __HAL_CEC_GET_FLAG - -/** - * @} - */ - -/** @defgroup HAL_COMP_Aliased_Defines HAL COMP Aliased Defines maintained for legacy purpose - * @{ - */ -#define COMP_WINDOWMODE_DISABLED COMP_WINDOWMODE_DISABLE -#define COMP_WINDOWMODE_ENABLED COMP_WINDOWMODE_ENABLE -#define COMP_EXTI_LINE_COMP1_EVENT COMP_EXTI_LINE_COMP1 -#define COMP_EXTI_LINE_COMP2_EVENT COMP_EXTI_LINE_COMP2 -#define COMP_EXTI_LINE_COMP3_EVENT COMP_EXTI_LINE_COMP3 -#define COMP_EXTI_LINE_COMP4_EVENT COMP_EXTI_LINE_COMP4 -#define COMP_EXTI_LINE_COMP5_EVENT COMP_EXTI_LINE_COMP5 -#define COMP_EXTI_LINE_COMP6_EVENT COMP_EXTI_LINE_COMP6 -#define COMP_EXTI_LINE_COMP7_EVENT COMP_EXTI_LINE_COMP7 -#if defined(STM32L0) -#define COMP_LPTIMCONNECTION_ENABLED ((uint32_t)0x00000003U) /*!< COMPX output generic naming: connected to LPTIM input 1 for COMP1, LPTIM input 2 for COMP2 */ -#endif -#define COMP_OUTPUT_COMP6TIM2OCREFCLR COMP_OUTPUT_COMP6_TIM2OCREFCLR -#if defined(STM32F373xC) || defined(STM32F378xx) -#define COMP_OUTPUT_TIM3IC1 COMP_OUTPUT_COMP1_TIM3IC1 -#define COMP_OUTPUT_TIM3OCREFCLR COMP_OUTPUT_COMP1_TIM3OCREFCLR -#endif /* STM32F373xC || STM32F378xx */ - -#if defined(STM32L0) || defined(STM32L4) -#define COMP_WINDOWMODE_ENABLE COMP_WINDOWMODE_COMP1_INPUT_PLUS_COMMON - -#define COMP_NONINVERTINGINPUT_IO1 COMP_INPUT_PLUS_IO1 -#define COMP_NONINVERTINGINPUT_IO2 COMP_INPUT_PLUS_IO2 -#define COMP_NONINVERTINGINPUT_IO3 COMP_INPUT_PLUS_IO3 -#define COMP_NONINVERTINGINPUT_IO4 COMP_INPUT_PLUS_IO4 -#define COMP_NONINVERTINGINPUT_IO5 COMP_INPUT_PLUS_IO5 -#define COMP_NONINVERTINGINPUT_IO6 COMP_INPUT_PLUS_IO6 - -#define COMP_INVERTINGINPUT_1_4VREFINT COMP_INPUT_MINUS_1_4VREFINT -#define COMP_INVERTINGINPUT_1_2VREFINT COMP_INPUT_MINUS_1_2VREFINT -#define COMP_INVERTINGINPUT_3_4VREFINT COMP_INPUT_MINUS_3_4VREFINT -#define COMP_INVERTINGINPUT_VREFINT COMP_INPUT_MINUS_VREFINT -#define COMP_INVERTINGINPUT_DAC1_CH1 COMP_INPUT_MINUS_DAC1_CH1 -#define COMP_INVERTINGINPUT_DAC1_CH2 COMP_INPUT_MINUS_DAC1_CH2 -#define COMP_INVERTINGINPUT_DAC1 COMP_INPUT_MINUS_DAC1_CH1 -#define COMP_INVERTINGINPUT_DAC2 COMP_INPUT_MINUS_DAC1_CH2 -#define COMP_INVERTINGINPUT_IO1 COMP_INPUT_MINUS_IO1 -#if defined(STM32L0) -/* Issue fixed on STM32L0 COMP driver: only 2 dedicated IO (IO1 and IO2), */ -/* IO2 was wrongly assigned to IO shared with DAC and IO3 was corresponding */ -/* to the second dedicated IO (only for COMP2). */ -#define COMP_INVERTINGINPUT_IO2 COMP_INPUT_MINUS_DAC1_CH2 -#define COMP_INVERTINGINPUT_IO3 COMP_INPUT_MINUS_IO2 -#else -#define COMP_INVERTINGINPUT_IO2 COMP_INPUT_MINUS_IO2 -#define COMP_INVERTINGINPUT_IO3 COMP_INPUT_MINUS_IO3 -#endif -#define COMP_INVERTINGINPUT_IO4 COMP_INPUT_MINUS_IO4 -#define COMP_INVERTINGINPUT_IO5 COMP_INPUT_MINUS_IO5 - -#define COMP_OUTPUTLEVEL_LOW COMP_OUTPUT_LEVEL_LOW -#define COMP_OUTPUTLEVEL_HIGH COMP_OUTPUT_LEVEL_HIGH - -/* Note: Literal "COMP_FLAG_LOCK" kept for legacy purpose. */ -/* To check COMP lock state, use macro "__HAL_COMP_IS_LOCKED()". */ -#if defined(COMP_CSR_LOCK) -#define COMP_FLAG_LOCK COMP_CSR_LOCK -#elif defined(COMP_CSR_COMP1LOCK) -#define COMP_FLAG_LOCK COMP_CSR_COMP1LOCK -#elif defined(COMP_CSR_COMPxLOCK) -#define COMP_FLAG_LOCK COMP_CSR_COMPxLOCK -#endif - -#if defined(STM32L4) -#define COMP_BLANKINGSRCE_TIM1OC5 COMP_BLANKINGSRC_TIM1_OC5_COMP1 -#define COMP_BLANKINGSRCE_TIM2OC3 COMP_BLANKINGSRC_TIM2_OC3_COMP1 -#define COMP_BLANKINGSRCE_TIM3OC3 COMP_BLANKINGSRC_TIM3_OC3_COMP1 -#define COMP_BLANKINGSRCE_TIM3OC4 COMP_BLANKINGSRC_TIM3_OC4_COMP2 -#define COMP_BLANKINGSRCE_TIM8OC5 COMP_BLANKINGSRC_TIM8_OC5_COMP2 -#define COMP_BLANKINGSRCE_TIM15OC1 COMP_BLANKINGSRC_TIM15_OC1_COMP2 -#define COMP_BLANKINGSRCE_NONE COMP_BLANKINGSRC_NONE -#endif - -#if defined(STM32L0) -#define COMP_MODE_HIGHSPEED COMP_POWERMODE_MEDIUMSPEED -#define COMP_MODE_LOWSPEED COMP_POWERMODE_ULTRALOWPOWER -#else -#define COMP_MODE_HIGHSPEED COMP_POWERMODE_HIGHSPEED -#define COMP_MODE_MEDIUMSPEED COMP_POWERMODE_MEDIUMSPEED -#define COMP_MODE_LOWPOWER COMP_POWERMODE_LOWPOWER -#define COMP_MODE_ULTRALOWPOWER COMP_POWERMODE_ULTRALOWPOWER -#endif - -#endif -/** - * @} - */ - -/** @defgroup HAL_CORTEX_Aliased_Defines HAL CORTEX Aliased Defines maintained for legacy purpose - * @{ - */ -#define __HAL_CORTEX_SYSTICKCLK_CONFIG HAL_SYSTICK_CLKSourceConfig -/** - * @} - */ - -/** @defgroup HAL_CRC_Aliased_Defines HAL CRC Aliased Defines maintained for legacy purpose - * @{ - */ - -#define CRC_OUTPUTDATA_INVERSION_DISABLED CRC_OUTPUTDATA_INVERSION_DISABLE -#define CRC_OUTPUTDATA_INVERSION_ENABLED CRC_OUTPUTDATA_INVERSION_ENABLE - -/** - * @} - */ - -/** @defgroup HAL_DAC_Aliased_Defines HAL DAC Aliased Defines maintained for legacy purpose - * @{ - */ - -#define DAC1_CHANNEL_1 DAC_CHANNEL_1 -#define DAC1_CHANNEL_2 DAC_CHANNEL_2 -#define DAC2_CHANNEL_1 DAC_CHANNEL_1 -#define DAC_WAVE_NONE 0x00000000U -#define DAC_WAVE_NOISE DAC_CR_WAVE1_0 -#define DAC_WAVE_TRIANGLE DAC_CR_WAVE1_1 -#define DAC_WAVEGENERATION_NONE DAC_WAVE_NONE -#define DAC_WAVEGENERATION_NOISE DAC_WAVE_NOISE -#define DAC_WAVEGENERATION_TRIANGLE DAC_WAVE_TRIANGLE - -/** - * @} - */ - -/** @defgroup HAL_DMA_Aliased_Defines HAL DMA Aliased Defines maintained for legacy purpose - * @{ - */ -#define HAL_REMAPDMA_ADC_DMA_CH2 DMA_REMAP_ADC_DMA_CH2 -#define HAL_REMAPDMA_USART1_TX_DMA_CH4 DMA_REMAP_USART1_TX_DMA_CH4 -#define HAL_REMAPDMA_USART1_RX_DMA_CH5 DMA_REMAP_USART1_RX_DMA_CH5 -#define HAL_REMAPDMA_TIM16_DMA_CH4 DMA_REMAP_TIM16_DMA_CH4 -#define HAL_REMAPDMA_TIM17_DMA_CH2 DMA_REMAP_TIM17_DMA_CH2 -#define HAL_REMAPDMA_USART3_DMA_CH32 DMA_REMAP_USART3_DMA_CH32 -#define HAL_REMAPDMA_TIM16_DMA_CH6 DMA_REMAP_TIM16_DMA_CH6 -#define HAL_REMAPDMA_TIM17_DMA_CH7 DMA_REMAP_TIM17_DMA_CH7 -#define HAL_REMAPDMA_SPI2_DMA_CH67 DMA_REMAP_SPI2_DMA_CH67 -#define HAL_REMAPDMA_USART2_DMA_CH67 DMA_REMAP_USART2_DMA_CH67 -#define HAL_REMAPDMA_I2C1_DMA_CH76 DMA_REMAP_I2C1_DMA_CH76 -#define HAL_REMAPDMA_TIM1_DMA_CH6 DMA_REMAP_TIM1_DMA_CH6 -#define HAL_REMAPDMA_TIM2_DMA_CH7 DMA_REMAP_TIM2_DMA_CH7 -#define HAL_REMAPDMA_TIM3_DMA_CH6 DMA_REMAP_TIM3_DMA_CH6 - -#define IS_HAL_REMAPDMA IS_DMA_REMAP -#define __HAL_REMAPDMA_CHANNEL_ENABLE __HAL_DMA_REMAP_CHANNEL_ENABLE -#define __HAL_REMAPDMA_CHANNEL_DISABLE __HAL_DMA_REMAP_CHANNEL_DISABLE - -#if defined(STM32L4) - -#define HAL_DMAMUX1_REQUEST_GEN_EXTI0 HAL_DMAMUX1_REQ_GEN_EXTI0 -#define HAL_DMAMUX1_REQUEST_GEN_EXTI1 HAL_DMAMUX1_REQ_GEN_EXTI1 -#define HAL_DMAMUX1_REQUEST_GEN_EXTI2 HAL_DMAMUX1_REQ_GEN_EXTI2 -#define HAL_DMAMUX1_REQUEST_GEN_EXTI3 HAL_DMAMUX1_REQ_GEN_EXTI3 -#define HAL_DMAMUX1_REQUEST_GEN_EXTI4 HAL_DMAMUX1_REQ_GEN_EXTI4 -#define HAL_DMAMUX1_REQUEST_GEN_EXTI5 HAL_DMAMUX1_REQ_GEN_EXTI5 -#define HAL_DMAMUX1_REQUEST_GEN_EXTI6 HAL_DMAMUX1_REQ_GEN_EXTI6 -#define HAL_DMAMUX1_REQUEST_GEN_EXTI7 HAL_DMAMUX1_REQ_GEN_EXTI7 -#define HAL_DMAMUX1_REQUEST_GEN_EXTI8 HAL_DMAMUX1_REQ_GEN_EXTI8 -#define HAL_DMAMUX1_REQUEST_GEN_EXTI9 HAL_DMAMUX1_REQ_GEN_EXTI9 -#define HAL_DMAMUX1_REQUEST_GEN_EXTI10 HAL_DMAMUX1_REQ_GEN_EXTI10 -#define HAL_DMAMUX1_REQUEST_GEN_EXTI11 HAL_DMAMUX1_REQ_GEN_EXTI11 -#define HAL_DMAMUX1_REQUEST_GEN_EXTI12 HAL_DMAMUX1_REQ_GEN_EXTI12 -#define HAL_DMAMUX1_REQUEST_GEN_EXTI13 HAL_DMAMUX1_REQ_GEN_EXTI13 -#define HAL_DMAMUX1_REQUEST_GEN_EXTI14 HAL_DMAMUX1_REQ_GEN_EXTI14 -#define HAL_DMAMUX1_REQUEST_GEN_EXTI15 HAL_DMAMUX1_REQ_GEN_EXTI15 -#define HAL_DMAMUX1_REQUEST_GEN_DMAMUX1_CH0_EVT HAL_DMAMUX1_REQ_GEN_DMAMUX1_CH0_EVT -#define HAL_DMAMUX1_REQUEST_GEN_DMAMUX1_CH1_EVT HAL_DMAMUX1_REQ_GEN_DMAMUX1_CH1_EVT -#define HAL_DMAMUX1_REQUEST_GEN_DMAMUX1_CH2_EVT HAL_DMAMUX1_REQ_GEN_DMAMUX1_CH2_EVT -#define HAL_DMAMUX1_REQUEST_GEN_DMAMUX1_CH3_EVT HAL_DMAMUX1_REQ_GEN_DMAMUX1_CH3_EVT -#define HAL_DMAMUX1_REQUEST_GEN_LPTIM1_OUT HAL_DMAMUX1_REQ_GEN_LPTIM1_OUT -#define HAL_DMAMUX1_REQUEST_GEN_LPTIM2_OUT HAL_DMAMUX1_REQ_GEN_LPTIM2_OUT -#define HAL_DMAMUX1_REQUEST_GEN_DSI_TE HAL_DMAMUX1_REQ_GEN_DSI_TE -#define HAL_DMAMUX1_REQUEST_GEN_DSI_EOT HAL_DMAMUX1_REQ_GEN_DSI_EOT -#define HAL_DMAMUX1_REQUEST_GEN_DMA2D_EOT HAL_DMAMUX1_REQ_GEN_DMA2D_EOT -#define HAL_DMAMUX1_REQUEST_GEN_LTDC_IT HAL_DMAMUX1_REQ_GEN_LTDC_IT - -#define HAL_DMAMUX_REQUEST_GEN_NO_EVENT HAL_DMAMUX_REQ_GEN_NO_EVENT -#define HAL_DMAMUX_REQUEST_GEN_RISING HAL_DMAMUX_REQ_GEN_RISING -#define HAL_DMAMUX_REQUEST_GEN_FALLING HAL_DMAMUX_REQ_GEN_FALLING -#define HAL_DMAMUX_REQUEST_GEN_RISING_FALLING HAL_DMAMUX_REQ_GEN_RISING_FALLING - -#endif /* STM32L4 */ - -#if defined(STM32H7) - -#define DMA_REQUEST_DAC1 DMA_REQUEST_DAC1_CH1 -#define DMA_REQUEST_DAC2 DMA_REQUEST_DAC1_CH2 - -#define BDMA_REQUEST_LP_UART1_RX BDMA_REQUEST_LPUART1_RX -#define BDMA_REQUEST_LP_UART1_TX BDMA_REQUEST_LPUART1_TX - -#define HAL_DMAMUX1_REQUEST_GEN_DMAMUX1_CH0_EVT HAL_DMAMUX1_REQ_GEN_DMAMUX1_CH0_EVT -#define HAL_DMAMUX1_REQUEST_GEN_DMAMUX1_CH1_EVT HAL_DMAMUX1_REQ_GEN_DMAMUX1_CH1_EVT -#define HAL_DMAMUX1_REQUEST_GEN_DMAMUX1_CH2_EVT HAL_DMAMUX1_REQ_GEN_DMAMUX1_CH2_EVT -#define HAL_DMAMUX1_REQUEST_GEN_LPTIM1_OUT HAL_DMAMUX1_REQ_GEN_LPTIM1_OUT -#define HAL_DMAMUX1_REQUEST_GEN_LPTIM2_OUT HAL_DMAMUX1_REQ_GEN_LPTIM2_OUT -#define HAL_DMAMUX1_REQUEST_GEN_LPTIM3_OUT HAL_DMAMUX1_REQ_GEN_LPTIM3_OUT -#define HAL_DMAMUX1_REQUEST_GEN_EXTI0 HAL_DMAMUX1_REQ_GEN_EXTI0 -#define HAL_DMAMUX1_REQUEST_GEN_TIM12_TRGO HAL_DMAMUX1_REQ_GEN_TIM12_TRGO - -#define HAL_DMAMUX2_REQUEST_GEN_DMAMUX2_CH0_EVT HAL_DMAMUX2_REQ_GEN_DMAMUX2_CH0_EVT -#define HAL_DMAMUX2_REQUEST_GEN_DMAMUX2_CH1_EVT HAL_DMAMUX2_REQ_GEN_DMAMUX2_CH1_EVT -#define HAL_DMAMUX2_REQUEST_GEN_DMAMUX2_CH2_EVT HAL_DMAMUX2_REQ_GEN_DMAMUX2_CH2_EVT -#define HAL_DMAMUX2_REQUEST_GEN_DMAMUX2_CH3_EVT HAL_DMAMUX2_REQ_GEN_DMAMUX2_CH3_EVT -#define HAL_DMAMUX2_REQUEST_GEN_DMAMUX2_CH4_EVT HAL_DMAMUX2_REQ_GEN_DMAMUX2_CH4_EVT -#define HAL_DMAMUX2_REQUEST_GEN_DMAMUX2_CH5_EVT HAL_DMAMUX2_REQ_GEN_DMAMUX2_CH5_EVT -#define HAL_DMAMUX2_REQUEST_GEN_DMAMUX2_CH6_EVT HAL_DMAMUX2_REQ_GEN_DMAMUX2_CH6_EVT -#define HAL_DMAMUX2_REQUEST_GEN_LPUART1_RX_WKUP HAL_DMAMUX2_REQ_GEN_LPUART1_RX_WKUP -#define HAL_DMAMUX2_REQUEST_GEN_LPUART1_TX_WKUP HAL_DMAMUX2_REQ_GEN_LPUART1_TX_WKUP -#define HAL_DMAMUX2_REQUEST_GEN_LPTIM2_WKUP HAL_DMAMUX2_REQ_GEN_LPTIM2_WKUP -#define HAL_DMAMUX2_REQUEST_GEN_LPTIM2_OUT HAL_DMAMUX2_REQ_GEN_LPTIM2_OUT -#define HAL_DMAMUX2_REQUEST_GEN_LPTIM3_WKUP HAL_DMAMUX2_REQ_GEN_LPTIM3_WKUP -#define HAL_DMAMUX2_REQUEST_GEN_LPTIM3_OUT HAL_DMAMUX2_REQ_GEN_LPTIM3_OUT -#define HAL_DMAMUX2_REQUEST_GEN_LPTIM4_WKUP HAL_DMAMUX2_REQ_GEN_LPTIM4_WKUP -#define HAL_DMAMUX2_REQUEST_GEN_LPTIM5_WKUP HAL_DMAMUX2_REQ_GEN_LPTIM5_WKUP -#define HAL_DMAMUX2_REQUEST_GEN_I2C4_WKUP HAL_DMAMUX2_REQ_GEN_I2C4_WKUP -#define HAL_DMAMUX2_REQUEST_GEN_SPI6_WKUP HAL_DMAMUX2_REQ_GEN_SPI6_WKUP -#define HAL_DMAMUX2_REQUEST_GEN_COMP1_OUT HAL_DMAMUX2_REQ_GEN_COMP1_OUT -#define HAL_DMAMUX2_REQUEST_GEN_COMP2_OUT HAL_DMAMUX2_REQ_GEN_COMP2_OUT -#define HAL_DMAMUX2_REQUEST_GEN_RTC_WKUP HAL_DMAMUX2_REQ_GEN_RTC_WKUP -#define HAL_DMAMUX2_REQUEST_GEN_EXTI0 HAL_DMAMUX2_REQ_GEN_EXTI0 -#define HAL_DMAMUX2_REQUEST_GEN_EXTI2 HAL_DMAMUX2_REQ_GEN_EXTI2 -#define HAL_DMAMUX2_REQUEST_GEN_I2C4_IT_EVT HAL_DMAMUX2_REQ_GEN_I2C4_IT_EVT -#define HAL_DMAMUX2_REQUEST_GEN_SPI6_IT HAL_DMAMUX2_REQ_GEN_SPI6_IT -#define HAL_DMAMUX2_REQUEST_GEN_LPUART1_TX_IT HAL_DMAMUX2_REQ_GEN_LPUART1_TX_IT -#define HAL_DMAMUX2_REQUEST_GEN_LPUART1_RX_IT HAL_DMAMUX2_REQ_GEN_LPUART1_RX_IT -#define HAL_DMAMUX2_REQUEST_GEN_ADC3_IT HAL_DMAMUX2_REQ_GEN_ADC3_IT -#define HAL_DMAMUX2_REQUEST_GEN_ADC3_AWD1_OUT HAL_DMAMUX2_REQ_GEN_ADC3_AWD1_OUT -#define HAL_DMAMUX2_REQUEST_GEN_BDMA_CH0_IT HAL_DMAMUX2_REQ_GEN_BDMA_CH0_IT -#define HAL_DMAMUX2_REQUEST_GEN_BDMA_CH1_IT HAL_DMAMUX2_REQ_GEN_BDMA_CH1_IT - -#define HAL_DMAMUX_REQUEST_GEN_NO_EVENT HAL_DMAMUX_REQ_GEN_NO_EVENT -#define HAL_DMAMUX_REQUEST_GEN_RISING HAL_DMAMUX_REQ_GEN_RISING -#define HAL_DMAMUX_REQUEST_GEN_FALLING HAL_DMAMUX_REQ_GEN_FALLING -#define HAL_DMAMUX_REQUEST_GEN_RISING_FALLING HAL_DMAMUX_REQ_GEN_RISING_FALLING - -#define DFSDM_FILTER_EXT_TRIG_LPTIM1 DFSDM_FILTER_EXT_TRIG_LPTIM1_OUT -#define DFSDM_FILTER_EXT_TRIG_LPTIM2 DFSDM_FILTER_EXT_TRIG_LPTIM2_OUT -#define DFSDM_FILTER_EXT_TRIG_LPTIM3 DFSDM_FILTER_EXT_TRIG_LPTIM3_OUT - -#endif /* STM32H7 */ - -/** - * @} - */ - -/** @defgroup HAL_FLASH_Aliased_Defines HAL FLASH Aliased Defines maintained for legacy purpose - * @{ - */ - -#define TYPEPROGRAM_BYTE FLASH_TYPEPROGRAM_BYTE -#define TYPEPROGRAM_HALFWORD FLASH_TYPEPROGRAM_HALFWORD -#define TYPEPROGRAM_WORD FLASH_TYPEPROGRAM_WORD -#define TYPEPROGRAM_DOUBLEWORD FLASH_TYPEPROGRAM_DOUBLEWORD -#define TYPEERASE_SECTORS FLASH_TYPEERASE_SECTORS -#define TYPEERASE_PAGES FLASH_TYPEERASE_PAGES -#define TYPEERASE_PAGEERASE FLASH_TYPEERASE_PAGES -#define TYPEERASE_MASSERASE FLASH_TYPEERASE_MASSERASE -#define WRPSTATE_DISABLE OB_WRPSTATE_DISABLE -#define WRPSTATE_ENABLE OB_WRPSTATE_ENABLE -#define HAL_FLASH_TIMEOUT_VALUE FLASH_TIMEOUT_VALUE -#define OBEX_PCROP OPTIONBYTE_PCROP -#define OBEX_BOOTCONFIG OPTIONBYTE_BOOTCONFIG -#define PCROPSTATE_DISABLE OB_PCROP_STATE_DISABLE -#define PCROPSTATE_ENABLE OB_PCROP_STATE_ENABLE -#define TYPEERASEDATA_BYTE FLASH_TYPEERASEDATA_BYTE -#define TYPEERASEDATA_HALFWORD FLASH_TYPEERASEDATA_HALFWORD -#define TYPEERASEDATA_WORD FLASH_TYPEERASEDATA_WORD -#define TYPEPROGRAMDATA_BYTE FLASH_TYPEPROGRAMDATA_BYTE -#define TYPEPROGRAMDATA_HALFWORD FLASH_TYPEPROGRAMDATA_HALFWORD -#define TYPEPROGRAMDATA_WORD FLASH_TYPEPROGRAMDATA_WORD -#define TYPEPROGRAMDATA_FASTBYTE FLASH_TYPEPROGRAMDATA_FASTBYTE -#define TYPEPROGRAMDATA_FASTHALFWORD FLASH_TYPEPROGRAMDATA_FASTHALFWORD -#define TYPEPROGRAMDATA_FASTWORD FLASH_TYPEPROGRAMDATA_FASTWORD -#define PAGESIZE FLASH_PAGE_SIZE -#define TYPEPROGRAM_FASTBYTE FLASH_TYPEPROGRAM_BYTE -#define TYPEPROGRAM_FASTHALFWORD FLASH_TYPEPROGRAM_HALFWORD -#define TYPEPROGRAM_FASTWORD FLASH_TYPEPROGRAM_WORD -#define VOLTAGE_RANGE_1 FLASH_VOLTAGE_RANGE_1 -#define VOLTAGE_RANGE_2 FLASH_VOLTAGE_RANGE_2 -#define VOLTAGE_RANGE_3 FLASH_VOLTAGE_RANGE_3 -#define VOLTAGE_RANGE_4 FLASH_VOLTAGE_RANGE_4 -#define TYPEPROGRAM_FAST FLASH_TYPEPROGRAM_FAST -#define TYPEPROGRAM_FAST_AND_LAST FLASH_TYPEPROGRAM_FAST_AND_LAST -#define WRPAREA_BANK1_AREAA OB_WRPAREA_BANK1_AREAA -#define WRPAREA_BANK1_AREAB OB_WRPAREA_BANK1_AREAB -#define WRPAREA_BANK2_AREAA OB_WRPAREA_BANK2_AREAA -#define WRPAREA_BANK2_AREAB OB_WRPAREA_BANK2_AREAB -#define IWDG_STDBY_FREEZE OB_IWDG_STDBY_FREEZE -#define IWDG_STDBY_ACTIVE OB_IWDG_STDBY_RUN -#define IWDG_STOP_FREEZE OB_IWDG_STOP_FREEZE -#define IWDG_STOP_ACTIVE OB_IWDG_STOP_RUN -#define FLASH_ERROR_NONE HAL_FLASH_ERROR_NONE -#define FLASH_ERROR_RD HAL_FLASH_ERROR_RD -#define FLASH_ERROR_PG HAL_FLASH_ERROR_PROG -#define FLASH_ERROR_PGP HAL_FLASH_ERROR_PGS -#define FLASH_ERROR_WRP HAL_FLASH_ERROR_WRP -#define FLASH_ERROR_OPTV HAL_FLASH_ERROR_OPTV -#define FLASH_ERROR_OPTVUSR HAL_FLASH_ERROR_OPTVUSR -#define FLASH_ERROR_PROG HAL_FLASH_ERROR_PROG -#define FLASH_ERROR_OP HAL_FLASH_ERROR_OPERATION -#define FLASH_ERROR_PGA HAL_FLASH_ERROR_PGA -#define FLASH_ERROR_SIZE HAL_FLASH_ERROR_SIZE -#define FLASH_ERROR_SIZ HAL_FLASH_ERROR_SIZE -#define FLASH_ERROR_PGS HAL_FLASH_ERROR_PGS -#define FLASH_ERROR_MIS HAL_FLASH_ERROR_MIS -#define FLASH_ERROR_FAST HAL_FLASH_ERROR_FAST -#define FLASH_ERROR_FWWERR HAL_FLASH_ERROR_FWWERR -#define FLASH_ERROR_NOTZERO HAL_FLASH_ERROR_NOTZERO -#define FLASH_ERROR_OPERATION HAL_FLASH_ERROR_OPERATION -#define FLASH_ERROR_ERS HAL_FLASH_ERROR_ERS -#define OB_WDG_SW OB_IWDG_SW -#define OB_WDG_HW OB_IWDG_HW -#define OB_SDADC12_VDD_MONITOR_SET OB_SDACD_VDD_MONITOR_SET -#define OB_SDADC12_VDD_MONITOR_RESET OB_SDACD_VDD_MONITOR_RESET -#define OB_RAM_PARITY_CHECK_SET OB_SRAM_PARITY_SET -#define OB_RAM_PARITY_CHECK_RESET OB_SRAM_PARITY_RESET -#define IS_OB_SDADC12_VDD_MONITOR IS_OB_SDACD_VDD_MONITOR -#define OB_RDP_LEVEL0 OB_RDP_LEVEL_0 -#define OB_RDP_LEVEL1 OB_RDP_LEVEL_1 -#define OB_RDP_LEVEL2 OB_RDP_LEVEL_2 -#if defined(STM32G0) -#define OB_BOOT_LOCK_DISABLE OB_BOOT_ENTRY_FORCED_NONE -#define OB_BOOT_LOCK_ENABLE OB_BOOT_ENTRY_FORCED_FLASH -#else -#define OB_BOOT_ENTRY_FORCED_NONE OB_BOOT_LOCK_DISABLE -#define OB_BOOT_ENTRY_FORCED_FLASH OB_BOOT_LOCK_ENABLE -#endif -#if defined(STM32H7) -#define FLASH_FLAG_SNECCE_BANK1RR FLASH_FLAG_SNECCERR_BANK1 -#define FLASH_FLAG_DBECCE_BANK1RR FLASH_FLAG_DBECCERR_BANK1 -#define FLASH_FLAG_STRBER_BANK1R FLASH_FLAG_STRBERR_BANK1 -#define FLASH_FLAG_SNECCE_BANK2RR FLASH_FLAG_SNECCERR_BANK2 -#define FLASH_FLAG_DBECCE_BANK2RR FLASH_FLAG_DBECCERR_BANK2 -#define FLASH_FLAG_STRBER_BANK2R FLASH_FLAG_STRBERR_BANK2 -#endif - -/** - * @} - */ - -/** @defgroup HAL_JPEG_Aliased_Macros HAL JPEG Aliased Macros maintained for legacy purpose - * @{ - */ - -#if defined(STM32H7) -#define __HAL_RCC_JPEG_CLK_ENABLE __HAL_RCC_JPGDECEN_CLK_ENABLE -#define __HAL_RCC_JPEG_CLK_DISABLE __HAL_RCC_JPGDECEN_CLK_DISABLE -#define __HAL_RCC_JPEG_FORCE_RESET __HAL_RCC_JPGDECRST_FORCE_RESET -#define __HAL_RCC_JPEG_RELEASE_RESET __HAL_RCC_JPGDECRST_RELEASE_RESET -#define __HAL_RCC_JPEG_CLK_SLEEP_ENABLE __HAL_RCC_JPGDEC_CLK_SLEEP_ENABLE -#define __HAL_RCC_JPEG_CLK_SLEEP_DISABLE __HAL_RCC_JPGDEC_CLK_SLEEP_DISABLE -#endif /* STM32H7 */ - -/** - * @} - */ - -/** @defgroup HAL_SYSCFG_Aliased_Defines HAL SYSCFG Aliased Defines maintained for legacy purpose - * @{ - */ - -#define HAL_SYSCFG_FASTMODEPLUS_I2C_PA9 I2C_FASTMODEPLUS_PA9 -#define HAL_SYSCFG_FASTMODEPLUS_I2C_PA10 I2C_FASTMODEPLUS_PA10 -#define HAL_SYSCFG_FASTMODEPLUS_I2C_PB6 I2C_FASTMODEPLUS_PB6 -#define HAL_SYSCFG_FASTMODEPLUS_I2C_PB7 I2C_FASTMODEPLUS_PB7 -#define HAL_SYSCFG_FASTMODEPLUS_I2C_PB8 I2C_FASTMODEPLUS_PB8 -#define HAL_SYSCFG_FASTMODEPLUS_I2C_PB9 I2C_FASTMODEPLUS_PB9 -#define HAL_SYSCFG_FASTMODEPLUS_I2C1 I2C_FASTMODEPLUS_I2C1 -#define HAL_SYSCFG_FASTMODEPLUS_I2C2 I2C_FASTMODEPLUS_I2C2 -#define HAL_SYSCFG_FASTMODEPLUS_I2C3 I2C_FASTMODEPLUS_I2C3 -/** - * @} - */ - - -/** @defgroup LL_FMC_Aliased_Defines LL FMC Aliased Defines maintained for compatibility purpose - * @{ - */ -#if defined(STM32L4) || defined(STM32F7) || defined(STM32H7) -#define FMC_NAND_PCC_WAIT_FEATURE_DISABLE FMC_NAND_WAIT_FEATURE_DISABLE -#define FMC_NAND_PCC_WAIT_FEATURE_ENABLE FMC_NAND_WAIT_FEATURE_ENABLE -#define FMC_NAND_PCC_MEM_BUS_WIDTH_8 FMC_NAND_MEM_BUS_WIDTH_8 -#define FMC_NAND_PCC_MEM_BUS_WIDTH_16 FMC_NAND_MEM_BUS_WIDTH_16 -#elif defined(STM32F1) || defined(STM32F2) || defined(STM32F3) || defined(STM32F4) -#define FMC_NAND_WAIT_FEATURE_DISABLE FMC_NAND_PCC_WAIT_FEATURE_DISABLE -#define FMC_NAND_WAIT_FEATURE_ENABLE FMC_NAND_PCC_WAIT_FEATURE_ENABLE -#define FMC_NAND_MEM_BUS_WIDTH_8 FMC_NAND_PCC_MEM_BUS_WIDTH_8 -#define FMC_NAND_MEM_BUS_WIDTH_16 FMC_NAND_PCC_MEM_BUS_WIDTH_16 -#endif -/** - * @} - */ - -/** @defgroup LL_FSMC_Aliased_Defines LL FSMC Aliased Defines maintained for legacy purpose - * @{ - */ - -#define FSMC_NORSRAM_TYPEDEF FSMC_NORSRAM_TypeDef -#define FSMC_NORSRAM_EXTENDED_TYPEDEF FSMC_NORSRAM_EXTENDED_TypeDef -/** - * @} - */ - -/** @defgroup HAL_GPIO_Aliased_Macros HAL GPIO Aliased Macros maintained for legacy purpose - * @{ - */ -#define GET_GPIO_SOURCE GPIO_GET_INDEX -#define GET_GPIO_INDEX GPIO_GET_INDEX - -#if defined(STM32F4) -#define GPIO_AF12_SDMMC GPIO_AF12_SDIO -#define GPIO_AF12_SDMMC1 GPIO_AF12_SDIO -#endif - -#if defined(STM32F7) -#define GPIO_AF12_SDIO GPIO_AF12_SDMMC1 -#define GPIO_AF12_SDMMC GPIO_AF12_SDMMC1 -#endif - -#if defined(STM32L4) -#define GPIO_AF12_SDIO GPIO_AF12_SDMMC1 -#define GPIO_AF12_SDMMC GPIO_AF12_SDMMC1 -#endif - -#if defined(STM32H7) -#define GPIO_AF7_SDIO1 GPIO_AF7_SDMMC1 -#define GPIO_AF8_SDIO1 GPIO_AF8_SDMMC1 -#define GPIO_AF12_SDIO1 GPIO_AF12_SDMMC1 -#define GPIO_AF9_SDIO2 GPIO_AF9_SDMMC2 -#define GPIO_AF10_SDIO2 GPIO_AF10_SDMMC2 -#define GPIO_AF11_SDIO2 GPIO_AF11_SDMMC2 -#endif - -#define GPIO_AF0_LPTIM GPIO_AF0_LPTIM1 -#define GPIO_AF1_LPTIM GPIO_AF1_LPTIM1 -#define GPIO_AF2_LPTIM GPIO_AF2_LPTIM1 - -#if defined(STM32L0) || defined(STM32L4) || defined(STM32F4) || defined(STM32F2) || defined(STM32F7) || defined(STM32H7) -#define GPIO_SPEED_LOW GPIO_SPEED_FREQ_LOW -#define GPIO_SPEED_MEDIUM GPIO_SPEED_FREQ_MEDIUM -#define GPIO_SPEED_FAST GPIO_SPEED_FREQ_HIGH -#define GPIO_SPEED_HIGH GPIO_SPEED_FREQ_VERY_HIGH -#endif /* STM32L0 || STM32L4 || STM32F4 || STM32F2 || STM32F7 || STM32H7*/ - -#if defined(STM32L1) - #define GPIO_SPEED_VERY_LOW GPIO_SPEED_FREQ_LOW - #define GPIO_SPEED_LOW GPIO_SPEED_FREQ_MEDIUM - #define GPIO_SPEED_MEDIUM GPIO_SPEED_FREQ_HIGH - #define GPIO_SPEED_HIGH GPIO_SPEED_FREQ_VERY_HIGH -#endif /* STM32L1 */ - -#if defined(STM32F0) || defined(STM32F3) || defined(STM32F1) - #define GPIO_SPEED_LOW GPIO_SPEED_FREQ_LOW - #define GPIO_SPEED_MEDIUM GPIO_SPEED_FREQ_MEDIUM - #define GPIO_SPEED_HIGH GPIO_SPEED_FREQ_HIGH -#endif /* STM32F0 || STM32F3 || STM32F1 */ - -#define GPIO_AF6_DFSDM GPIO_AF6_DFSDM1 -/** - * @} - */ - -/** @defgroup HAL_HRTIM_Aliased_Macros HAL HRTIM Aliased Macros maintained for legacy purpose - * @{ - */ -#define HRTIM_TIMDELAYEDPROTECTION_DISABLED HRTIM_TIMER_A_B_C_DELAYEDPROTECTION_DISABLED -#define HRTIM_TIMDELAYEDPROTECTION_DELAYEDOUT1_EEV68 HRTIM_TIMER_A_B_C_DELAYEDPROTECTION_DELAYEDOUT1_EEV6 -#define HRTIM_TIMDELAYEDPROTECTION_DELAYEDOUT2_EEV68 HRTIM_TIMER_A_B_C_DELAYEDPROTECTION_DELAYEDOUT2_EEV6 -#define HRTIM_TIMDELAYEDPROTECTION_DELAYEDBOTH_EEV68 HRTIM_TIMER_A_B_C_DELAYEDPROTECTION_DELAYEDBOTH_EEV6 -#define HRTIM_TIMDELAYEDPROTECTION_BALANCED_EEV68 HRTIM_TIMER_A_B_C_DELAYEDPROTECTION_BALANCED_EEV6 -#define HRTIM_TIMDELAYEDPROTECTION_DELAYEDOUT1_DEEV79 HRTIM_TIMER_A_B_C_DELAYEDPROTECTION_DELAYEDOUT1_DEEV7 -#define HRTIM_TIMDELAYEDPROTECTION_DELAYEDOUT2_DEEV79 HRTIM_TIMER_A_B_C_DELAYEDPROTECTION_DELAYEDOUT2_DEEV7 -#define HRTIM_TIMDELAYEDPROTECTION_DELAYEDBOTH_EEV79 HRTIM_TIMER_A_B_C_DELAYEDPROTECTION_DELAYEDBOTH_EEV7 -#define HRTIM_TIMDELAYEDPROTECTION_BALANCED_EEV79 HRTIM_TIMER_A_B_C_DELAYEDPROTECTION_BALANCED_EEV7 - -#define __HAL_HRTIM_SetCounter __HAL_HRTIM_SETCOUNTER -#define __HAL_HRTIM_GetCounter __HAL_HRTIM_GETCOUNTER -#define __HAL_HRTIM_SetPeriod __HAL_HRTIM_SETPERIOD -#define __HAL_HRTIM_GetPeriod __HAL_HRTIM_GETPERIOD -#define __HAL_HRTIM_SetClockPrescaler __HAL_HRTIM_SETCLOCKPRESCALER -#define __HAL_HRTIM_GetClockPrescaler __HAL_HRTIM_GETCLOCKPRESCALER -#define __HAL_HRTIM_SetCompare __HAL_HRTIM_SETCOMPARE -#define __HAL_HRTIM_GetCompare __HAL_HRTIM_GETCOMPARE -/** - * @} - */ - -/** @defgroup HAL_I2C_Aliased_Defines HAL I2C Aliased Defines maintained for legacy purpose - * @{ - */ -#define I2C_DUALADDRESS_DISABLED I2C_DUALADDRESS_DISABLE -#define I2C_DUALADDRESS_ENABLED I2C_DUALADDRESS_ENABLE -#define I2C_GENERALCALL_DISABLED I2C_GENERALCALL_DISABLE -#define I2C_GENERALCALL_ENABLED I2C_GENERALCALL_ENABLE -#define I2C_NOSTRETCH_DISABLED I2C_NOSTRETCH_DISABLE -#define I2C_NOSTRETCH_ENABLED I2C_NOSTRETCH_ENABLE -#define I2C_ANALOGFILTER_ENABLED I2C_ANALOGFILTER_ENABLE -#define I2C_ANALOGFILTER_DISABLED I2C_ANALOGFILTER_DISABLE -#if defined(STM32F0) || defined(STM32F1) || defined(STM32F3) || defined(STM32G0) || defined(STM32L4) || defined(STM32L1) || defined(STM32F7) -#define HAL_I2C_STATE_MEM_BUSY_TX HAL_I2C_STATE_BUSY_TX -#define HAL_I2C_STATE_MEM_BUSY_RX HAL_I2C_STATE_BUSY_RX -#define HAL_I2C_STATE_MASTER_BUSY_TX HAL_I2C_STATE_BUSY_TX -#define HAL_I2C_STATE_MASTER_BUSY_RX HAL_I2C_STATE_BUSY_RX -#define HAL_I2C_STATE_SLAVE_BUSY_TX HAL_I2C_STATE_BUSY_TX -#define HAL_I2C_STATE_SLAVE_BUSY_RX HAL_I2C_STATE_BUSY_RX -#endif -/** - * @} - */ - -/** @defgroup HAL_IRDA_Aliased_Defines HAL IRDA Aliased Defines maintained for legacy purpose - * @{ - */ -#define IRDA_ONE_BIT_SAMPLE_DISABLED IRDA_ONE_BIT_SAMPLE_DISABLE -#define IRDA_ONE_BIT_SAMPLE_ENABLED IRDA_ONE_BIT_SAMPLE_ENABLE - -/** - * @} - */ - -/** @defgroup HAL_IWDG_Aliased_Defines HAL IWDG Aliased Defines maintained for legacy purpose - * @{ - */ -#define KR_KEY_RELOAD IWDG_KEY_RELOAD -#define KR_KEY_ENABLE IWDG_KEY_ENABLE -#define KR_KEY_EWA IWDG_KEY_WRITE_ACCESS_ENABLE -#define KR_KEY_DWA IWDG_KEY_WRITE_ACCESS_DISABLE -/** - * @} - */ - -/** @defgroup HAL_LPTIM_Aliased_Defines HAL LPTIM Aliased Defines maintained for legacy purpose - * @{ - */ - -#define LPTIM_CLOCKSAMPLETIME_DIRECTTRANSISTION LPTIM_CLOCKSAMPLETIME_DIRECTTRANSITION -#define LPTIM_CLOCKSAMPLETIME_2TRANSISTIONS LPTIM_CLOCKSAMPLETIME_2TRANSITIONS -#define LPTIM_CLOCKSAMPLETIME_4TRANSISTIONS LPTIM_CLOCKSAMPLETIME_4TRANSITIONS -#define LPTIM_CLOCKSAMPLETIME_8TRANSISTIONS LPTIM_CLOCKSAMPLETIME_8TRANSITIONS - -#define LPTIM_CLOCKPOLARITY_RISINGEDGE LPTIM_CLOCKPOLARITY_RISING -#define LPTIM_CLOCKPOLARITY_FALLINGEDGE LPTIM_CLOCKPOLARITY_FALLING -#define LPTIM_CLOCKPOLARITY_BOTHEDGES LPTIM_CLOCKPOLARITY_RISING_FALLING - -#define LPTIM_TRIGSAMPLETIME_DIRECTTRANSISTION LPTIM_TRIGSAMPLETIME_DIRECTTRANSITION -#define LPTIM_TRIGSAMPLETIME_2TRANSISTIONS LPTIM_TRIGSAMPLETIME_2TRANSITIONS -#define LPTIM_TRIGSAMPLETIME_4TRANSISTIONS LPTIM_TRIGSAMPLETIME_4TRANSITIONS -#define LPTIM_TRIGSAMPLETIME_8TRANSISTIONS LPTIM_TRIGSAMPLETIME_8TRANSITIONS - -/* The following 3 definition have also been present in a temporary version of lptim.h */ -/* They need to be renamed also to the right name, just in case */ -#define LPTIM_TRIGSAMPLETIME_2TRANSITION LPTIM_TRIGSAMPLETIME_2TRANSITIONS -#define LPTIM_TRIGSAMPLETIME_4TRANSITION LPTIM_TRIGSAMPLETIME_4TRANSITIONS -#define LPTIM_TRIGSAMPLETIME_8TRANSITION LPTIM_TRIGSAMPLETIME_8TRANSITIONS - -/** - * @} - */ - -/** @defgroup HAL_NAND_Aliased_Defines HAL NAND Aliased Defines maintained for legacy purpose - * @{ - */ -#define HAL_NAND_Read_Page HAL_NAND_Read_Page_8b -#define HAL_NAND_Write_Page HAL_NAND_Write_Page_8b -#define HAL_NAND_Read_SpareArea HAL_NAND_Read_SpareArea_8b -#define HAL_NAND_Write_SpareArea HAL_NAND_Write_SpareArea_8b - -#define NAND_AddressTypedef NAND_AddressTypeDef - -#define __ARRAY_ADDRESS ARRAY_ADDRESS -#define __ADDR_1st_CYCLE ADDR_1ST_CYCLE -#define __ADDR_2nd_CYCLE ADDR_2ND_CYCLE -#define __ADDR_3rd_CYCLE ADDR_3RD_CYCLE -#define __ADDR_4th_CYCLE ADDR_4TH_CYCLE -/** - * @} - */ - -/** @defgroup HAL_NOR_Aliased_Defines HAL NOR Aliased Defines maintained for legacy purpose - * @{ - */ -#define NOR_StatusTypedef HAL_NOR_StatusTypeDef -#define NOR_SUCCESS HAL_NOR_STATUS_SUCCESS -#define NOR_ONGOING HAL_NOR_STATUS_ONGOING -#define NOR_ERROR HAL_NOR_STATUS_ERROR -#define NOR_TIMEOUT HAL_NOR_STATUS_TIMEOUT - -#define __NOR_WRITE NOR_WRITE -#define __NOR_ADDR_SHIFT NOR_ADDR_SHIFT -/** - * @} - */ - -/** @defgroup HAL_OPAMP_Aliased_Defines HAL OPAMP Aliased Defines maintained for legacy purpose - * @{ - */ - -#define OPAMP_NONINVERTINGINPUT_VP0 OPAMP_NONINVERTINGINPUT_IO0 -#define OPAMP_NONINVERTINGINPUT_VP1 OPAMP_NONINVERTINGINPUT_IO1 -#define OPAMP_NONINVERTINGINPUT_VP2 OPAMP_NONINVERTINGINPUT_IO2 -#define OPAMP_NONINVERTINGINPUT_VP3 OPAMP_NONINVERTINGINPUT_IO3 - -#define OPAMP_SEC_NONINVERTINGINPUT_VP0 OPAMP_SEC_NONINVERTINGINPUT_IO0 -#define OPAMP_SEC_NONINVERTINGINPUT_VP1 OPAMP_SEC_NONINVERTINGINPUT_IO1 -#define OPAMP_SEC_NONINVERTINGINPUT_VP2 OPAMP_SEC_NONINVERTINGINPUT_IO2 -#define OPAMP_SEC_NONINVERTINGINPUT_VP3 OPAMP_SEC_NONINVERTINGINPUT_IO3 - -#define OPAMP_INVERTINGINPUT_VM0 OPAMP_INVERTINGINPUT_IO0 -#define OPAMP_INVERTINGINPUT_VM1 OPAMP_INVERTINGINPUT_IO1 - -#define IOPAMP_INVERTINGINPUT_VM0 OPAMP_INVERTINGINPUT_IO0 -#define IOPAMP_INVERTINGINPUT_VM1 OPAMP_INVERTINGINPUT_IO1 - -#define OPAMP_SEC_INVERTINGINPUT_VM0 OPAMP_SEC_INVERTINGINPUT_IO0 -#define OPAMP_SEC_INVERTINGINPUT_VM1 OPAMP_SEC_INVERTINGINPUT_IO1 - -#define OPAMP_INVERTINGINPUT_VINM OPAMP_SEC_INVERTINGINPUT_IO1 - -#define OPAMP_PGACONNECT_NO OPAMP_PGA_CONNECT_INVERTINGINPUT_NO -#define OPAMP_PGACONNECT_VM0 OPAMP_PGA_CONNECT_INVERTINGINPUT_IO0 -#define OPAMP_PGACONNECT_VM1 OPAMP_PGA_CONNECT_INVERTINGINPUT_IO1 - -/** - * @} - */ - -/** @defgroup HAL_I2S_Aliased_Defines HAL I2S Aliased Defines maintained for legacy purpose - * @{ - */ -#define I2S_STANDARD_PHILLIPS I2S_STANDARD_PHILIPS - -#if defined(STM32H7) - #define I2S_IT_TXE I2S_IT_TXP - #define I2S_IT_RXNE I2S_IT_RXP - - #define I2S_FLAG_TXE I2S_FLAG_TXP - #define I2S_FLAG_RXNE I2S_FLAG_RXP - #define I2S_FLAG_FRE I2S_FLAG_TIFRE -#endif - -#if defined(STM32F7) - #define I2S_CLOCK_SYSCLK I2S_CLOCK_PLL -#endif -/** - * @} - */ - -/** @defgroup HAL_PCCARD_Aliased_Defines HAL PCCARD Aliased Defines maintained for legacy purpose - * @{ - */ - -/* Compact Flash-ATA registers description */ -#define CF_DATA ATA_DATA -#define CF_SECTOR_COUNT ATA_SECTOR_COUNT -#define CF_SECTOR_NUMBER ATA_SECTOR_NUMBER -#define CF_CYLINDER_LOW ATA_CYLINDER_LOW -#define CF_CYLINDER_HIGH ATA_CYLINDER_HIGH -#define CF_CARD_HEAD ATA_CARD_HEAD -#define CF_STATUS_CMD ATA_STATUS_CMD -#define CF_STATUS_CMD_ALTERNATE ATA_STATUS_CMD_ALTERNATE -#define CF_COMMON_DATA_AREA ATA_COMMON_DATA_AREA - -/* Compact Flash-ATA commands */ -#define CF_READ_SECTOR_CMD ATA_READ_SECTOR_CMD -#define CF_WRITE_SECTOR_CMD ATA_WRITE_SECTOR_CMD -#define CF_ERASE_SECTOR_CMD ATA_ERASE_SECTOR_CMD -#define CF_IDENTIFY_CMD ATA_IDENTIFY_CMD - -#define PCCARD_StatusTypedef HAL_PCCARD_StatusTypeDef -#define PCCARD_SUCCESS HAL_PCCARD_STATUS_SUCCESS -#define PCCARD_ONGOING HAL_PCCARD_STATUS_ONGOING -#define PCCARD_ERROR HAL_PCCARD_STATUS_ERROR -#define PCCARD_TIMEOUT HAL_PCCARD_STATUS_TIMEOUT -/** - * @} - */ - -/** @defgroup HAL_RTC_Aliased_Defines HAL RTC Aliased Defines maintained for legacy purpose - * @{ - */ - -#define FORMAT_BIN RTC_FORMAT_BIN -#define FORMAT_BCD RTC_FORMAT_BCD - -#define RTC_ALARMSUBSECONDMASK_None RTC_ALARMSUBSECONDMASK_NONE -#define RTC_TAMPERERASEBACKUP_DISABLED RTC_TAMPER_ERASE_BACKUP_DISABLE -#define RTC_TAMPERMASK_FLAG_DISABLED RTC_TAMPERMASK_FLAG_DISABLE -#define RTC_TAMPERMASK_FLAG_ENABLED RTC_TAMPERMASK_FLAG_ENABLE - -#define RTC_MASKTAMPERFLAG_DISABLED RTC_TAMPERMASK_FLAG_DISABLE -#define RTC_MASKTAMPERFLAG_ENABLED RTC_TAMPERMASK_FLAG_ENABLE -#define RTC_TAMPERERASEBACKUP_ENABLED RTC_TAMPER_ERASE_BACKUP_ENABLE -#define RTC_TAMPER1_2_INTERRUPT RTC_ALL_TAMPER_INTERRUPT -#define RTC_TAMPER1_2_3_INTERRUPT RTC_ALL_TAMPER_INTERRUPT - -#define RTC_TIMESTAMPPIN_PC13 RTC_TIMESTAMPPIN_DEFAULT -#define RTC_TIMESTAMPPIN_PA0 RTC_TIMESTAMPPIN_POS1 -#define RTC_TIMESTAMPPIN_PI8 RTC_TIMESTAMPPIN_POS1 -#define RTC_TIMESTAMPPIN_PC1 RTC_TIMESTAMPPIN_POS2 - -#define RTC_OUTPUT_REMAP_PC13 RTC_OUTPUT_REMAP_NONE -#define RTC_OUTPUT_REMAP_PB14 RTC_OUTPUT_REMAP_POS1 -#define RTC_OUTPUT_REMAP_PB2 RTC_OUTPUT_REMAP_POS1 - -#define RTC_TAMPERPIN_PC13 RTC_TAMPERPIN_DEFAULT -#define RTC_TAMPERPIN_PA0 RTC_TAMPERPIN_POS1 -#define RTC_TAMPERPIN_PI8 RTC_TAMPERPIN_POS1 - -/** - * @} - */ - - -/** @defgroup HAL_SMARTCARD_Aliased_Defines HAL SMARTCARD Aliased Defines maintained for legacy purpose - * @{ - */ -#define SMARTCARD_NACK_ENABLED SMARTCARD_NACK_ENABLE -#define SMARTCARD_NACK_DISABLED SMARTCARD_NACK_DISABLE - -#define SMARTCARD_ONEBIT_SAMPLING_DISABLED SMARTCARD_ONE_BIT_SAMPLE_DISABLE -#define SMARTCARD_ONEBIT_SAMPLING_ENABLED SMARTCARD_ONE_BIT_SAMPLE_ENABLE -#define SMARTCARD_ONEBIT_SAMPLING_DISABLE SMARTCARD_ONE_BIT_SAMPLE_DISABLE -#define SMARTCARD_ONEBIT_SAMPLING_ENABLE SMARTCARD_ONE_BIT_SAMPLE_ENABLE - -#define SMARTCARD_TIMEOUT_DISABLED SMARTCARD_TIMEOUT_DISABLE -#define SMARTCARD_TIMEOUT_ENABLED SMARTCARD_TIMEOUT_ENABLE - -#define SMARTCARD_LASTBIT_DISABLED SMARTCARD_LASTBIT_DISABLE -#define SMARTCARD_LASTBIT_ENABLED SMARTCARD_LASTBIT_ENABLE -/** - * @} - */ - - -/** @defgroup HAL_SMBUS_Aliased_Defines HAL SMBUS Aliased Defines maintained for legacy purpose - * @{ - */ -#define SMBUS_DUALADDRESS_DISABLED SMBUS_DUALADDRESS_DISABLE -#define SMBUS_DUALADDRESS_ENABLED SMBUS_DUALADDRESS_ENABLE -#define SMBUS_GENERALCALL_DISABLED SMBUS_GENERALCALL_DISABLE -#define SMBUS_GENERALCALL_ENABLED SMBUS_GENERALCALL_ENABLE -#define SMBUS_NOSTRETCH_DISABLED SMBUS_NOSTRETCH_DISABLE -#define SMBUS_NOSTRETCH_ENABLED SMBUS_NOSTRETCH_ENABLE -#define SMBUS_ANALOGFILTER_ENABLED SMBUS_ANALOGFILTER_ENABLE -#define SMBUS_ANALOGFILTER_DISABLED SMBUS_ANALOGFILTER_DISABLE -#define SMBUS_PEC_DISABLED SMBUS_PEC_DISABLE -#define SMBUS_PEC_ENABLED SMBUS_PEC_ENABLE -#define HAL_SMBUS_STATE_SLAVE_LISTEN HAL_SMBUS_STATE_LISTEN -/** - * @} - */ - -/** @defgroup HAL_SPI_Aliased_Defines HAL SPI Aliased Defines maintained for legacy purpose - * @{ - */ -#define SPI_TIMODE_DISABLED SPI_TIMODE_DISABLE -#define SPI_TIMODE_ENABLED SPI_TIMODE_ENABLE - -#define SPI_CRCCALCULATION_DISABLED SPI_CRCCALCULATION_DISABLE -#define SPI_CRCCALCULATION_ENABLED SPI_CRCCALCULATION_ENABLE - -#define SPI_NSS_PULSE_DISABLED SPI_NSS_PULSE_DISABLE -#define SPI_NSS_PULSE_ENABLED SPI_NSS_PULSE_ENABLE - -#if defined(STM32H7) - - #define SPI_FLAG_TXE SPI_FLAG_TXP - #define SPI_FLAG_RXNE SPI_FLAG_RXP - - #define SPI_IT_TXE SPI_IT_TXP - #define SPI_IT_RXNE SPI_IT_RXP - - #define SPI_FRLVL_EMPTY SPI_RX_FIFO_0PACKET - #define SPI_FRLVL_QUARTER_FULL SPI_RX_FIFO_1PACKET - #define SPI_FRLVL_HALF_FULL SPI_RX_FIFO_2PACKET - #define SPI_FRLVL_FULL SPI_RX_FIFO_3PACKET - -#endif /* STM32H7 */ - -/** - * @} - */ - -/** @defgroup HAL_TIM_Aliased_Defines HAL TIM Aliased Defines maintained for legacy purpose - * @{ - */ -#define CCER_CCxE_MASK TIM_CCER_CCxE_MASK -#define CCER_CCxNE_MASK TIM_CCER_CCxNE_MASK - -#define TIM_DMABase_CR1 TIM_DMABASE_CR1 -#define TIM_DMABase_CR2 TIM_DMABASE_CR2 -#define TIM_DMABase_SMCR TIM_DMABASE_SMCR -#define TIM_DMABase_DIER TIM_DMABASE_DIER -#define TIM_DMABase_SR TIM_DMABASE_SR -#define TIM_DMABase_EGR TIM_DMABASE_EGR -#define TIM_DMABase_CCMR1 TIM_DMABASE_CCMR1 -#define TIM_DMABase_CCMR2 TIM_DMABASE_CCMR2 -#define TIM_DMABase_CCER TIM_DMABASE_CCER -#define TIM_DMABase_CNT TIM_DMABASE_CNT -#define TIM_DMABase_PSC TIM_DMABASE_PSC -#define TIM_DMABase_ARR TIM_DMABASE_ARR -#define TIM_DMABase_RCR TIM_DMABASE_RCR -#define TIM_DMABase_CCR1 TIM_DMABASE_CCR1 -#define TIM_DMABase_CCR2 TIM_DMABASE_CCR2 -#define TIM_DMABase_CCR3 TIM_DMABASE_CCR3 -#define TIM_DMABase_CCR4 TIM_DMABASE_CCR4 -#define TIM_DMABase_BDTR TIM_DMABASE_BDTR -#define TIM_DMABase_DCR TIM_DMABASE_DCR -#define TIM_DMABase_DMAR TIM_DMABASE_DMAR -#define TIM_DMABase_OR1 TIM_DMABASE_OR1 -#define TIM_DMABase_CCMR3 TIM_DMABASE_CCMR3 -#define TIM_DMABase_CCR5 TIM_DMABASE_CCR5 -#define TIM_DMABase_CCR6 TIM_DMABASE_CCR6 -#define TIM_DMABase_OR2 TIM_DMABASE_OR2 -#define TIM_DMABase_OR3 TIM_DMABASE_OR3 -#define TIM_DMABase_OR TIM_DMABASE_OR - -#define TIM_EventSource_Update TIM_EVENTSOURCE_UPDATE -#define TIM_EventSource_CC1 TIM_EVENTSOURCE_CC1 -#define TIM_EventSource_CC2 TIM_EVENTSOURCE_CC2 -#define TIM_EventSource_CC3 TIM_EVENTSOURCE_CC3 -#define TIM_EventSource_CC4 TIM_EVENTSOURCE_CC4 -#define TIM_EventSource_COM TIM_EVENTSOURCE_COM -#define TIM_EventSource_Trigger TIM_EVENTSOURCE_TRIGGER -#define TIM_EventSource_Break TIM_EVENTSOURCE_BREAK -#define TIM_EventSource_Break2 TIM_EVENTSOURCE_BREAK2 - -#define TIM_DMABurstLength_1Transfer TIM_DMABURSTLENGTH_1TRANSFER -#define TIM_DMABurstLength_2Transfers TIM_DMABURSTLENGTH_2TRANSFERS -#define TIM_DMABurstLength_3Transfers TIM_DMABURSTLENGTH_3TRANSFERS -#define TIM_DMABurstLength_4Transfers TIM_DMABURSTLENGTH_4TRANSFERS -#define TIM_DMABurstLength_5Transfers TIM_DMABURSTLENGTH_5TRANSFERS -#define TIM_DMABurstLength_6Transfers TIM_DMABURSTLENGTH_6TRANSFERS -#define TIM_DMABurstLength_7Transfers TIM_DMABURSTLENGTH_7TRANSFERS -#define TIM_DMABurstLength_8Transfers TIM_DMABURSTLENGTH_8TRANSFERS -#define TIM_DMABurstLength_9Transfers TIM_DMABURSTLENGTH_9TRANSFERS -#define TIM_DMABurstLength_10Transfers TIM_DMABURSTLENGTH_10TRANSFERS -#define TIM_DMABurstLength_11Transfers TIM_DMABURSTLENGTH_11TRANSFERS -#define TIM_DMABurstLength_12Transfers TIM_DMABURSTLENGTH_12TRANSFERS -#define TIM_DMABurstLength_13Transfers TIM_DMABURSTLENGTH_13TRANSFERS -#define TIM_DMABurstLength_14Transfers TIM_DMABURSTLENGTH_14TRANSFERS -#define TIM_DMABurstLength_15Transfers TIM_DMABURSTLENGTH_15TRANSFERS -#define TIM_DMABurstLength_16Transfers TIM_DMABURSTLENGTH_16TRANSFERS -#define TIM_DMABurstLength_17Transfers TIM_DMABURSTLENGTH_17TRANSFERS -#define TIM_DMABurstLength_18Transfers TIM_DMABURSTLENGTH_18TRANSFERS - -#if defined(STM32L0) -#define TIM22_TI1_GPIO1 TIM22_TI1_GPIO -#define TIM22_TI1_GPIO2 TIM22_TI1_GPIO -#endif - -#if defined(STM32F3) -#define IS_TIM_HALL_INTERFACE_INSTANCE IS_TIM_HALL_SENSOR_INTERFACE_INSTANCE -#endif - -/** - * @} - */ - -/** @defgroup HAL_TSC_Aliased_Defines HAL TSC Aliased Defines maintained for legacy purpose - * @{ - */ -#define TSC_SYNC_POL_FALL TSC_SYNC_POLARITY_FALLING -#define TSC_SYNC_POL_RISE_HIGH TSC_SYNC_POLARITY_RISING -/** - * @} - */ - -/** @defgroup HAL_UART_Aliased_Defines HAL UART Aliased Defines maintained for legacy purpose - * @{ - */ -#define UART_ONEBIT_SAMPLING_DISABLED UART_ONE_BIT_SAMPLE_DISABLE -#define UART_ONEBIT_SAMPLING_ENABLED UART_ONE_BIT_SAMPLE_ENABLE -#define UART_ONE_BIT_SAMPLE_DISABLED UART_ONE_BIT_SAMPLE_DISABLE -#define UART_ONE_BIT_SAMPLE_ENABLED UART_ONE_BIT_SAMPLE_ENABLE - -#define __HAL_UART_ONEBIT_ENABLE __HAL_UART_ONE_BIT_SAMPLE_ENABLE -#define __HAL_UART_ONEBIT_DISABLE __HAL_UART_ONE_BIT_SAMPLE_DISABLE - -#define __DIV_SAMPLING16 UART_DIV_SAMPLING16 -#define __DIVMANT_SAMPLING16 UART_DIVMANT_SAMPLING16 -#define __DIVFRAQ_SAMPLING16 UART_DIVFRAQ_SAMPLING16 -#define __UART_BRR_SAMPLING16 UART_BRR_SAMPLING16 - -#define __DIV_SAMPLING8 UART_DIV_SAMPLING8 -#define __DIVMANT_SAMPLING8 UART_DIVMANT_SAMPLING8 -#define __DIVFRAQ_SAMPLING8 UART_DIVFRAQ_SAMPLING8 -#define __UART_BRR_SAMPLING8 UART_BRR_SAMPLING8 - -#define __DIV_LPUART UART_DIV_LPUART - -#define UART_WAKEUPMETHODE_IDLELINE UART_WAKEUPMETHOD_IDLELINE -#define UART_WAKEUPMETHODE_ADDRESSMARK UART_WAKEUPMETHOD_ADDRESSMARK - -/** - * @} - */ - - -/** @defgroup HAL_USART_Aliased_Defines HAL USART Aliased Defines maintained for legacy purpose - * @{ - */ - -#define USART_CLOCK_DISABLED USART_CLOCK_DISABLE -#define USART_CLOCK_ENABLED USART_CLOCK_ENABLE - -#define USARTNACK_ENABLED USART_NACK_ENABLE -#define USARTNACK_DISABLED USART_NACK_DISABLE -/** - * @} - */ - -/** @defgroup HAL_WWDG_Aliased_Defines HAL WWDG Aliased Defines maintained for legacy purpose - * @{ - */ -#define CFR_BASE WWDG_CFR_BASE - -/** - * @} - */ - -/** @defgroup HAL_CAN_Aliased_Defines HAL CAN Aliased Defines maintained for legacy purpose - * @{ - */ -#define CAN_FilterFIFO0 CAN_FILTER_FIFO0 -#define CAN_FilterFIFO1 CAN_FILTER_FIFO1 -#define CAN_IT_RQCP0 CAN_IT_TME -#define CAN_IT_RQCP1 CAN_IT_TME -#define CAN_IT_RQCP2 CAN_IT_TME -#define INAK_TIMEOUT CAN_TIMEOUT_VALUE -#define SLAK_TIMEOUT CAN_TIMEOUT_VALUE -#define CAN_TXSTATUS_FAILED ((uint8_t)0x00U) -#define CAN_TXSTATUS_OK ((uint8_t)0x01U) -#define CAN_TXSTATUS_PENDING ((uint8_t)0x02U) - -/** - * @} - */ - -/** @defgroup HAL_ETH_Aliased_Defines HAL ETH Aliased Defines maintained for legacy purpose - * @{ - */ - -#define VLAN_TAG ETH_VLAN_TAG -#define MIN_ETH_PAYLOAD ETH_MIN_ETH_PAYLOAD -#define MAX_ETH_PAYLOAD ETH_MAX_ETH_PAYLOAD -#define JUMBO_FRAME_PAYLOAD ETH_JUMBO_FRAME_PAYLOAD -#define MACMIIAR_CR_MASK ETH_MACMIIAR_CR_MASK -#define MACCR_CLEAR_MASK ETH_MACCR_CLEAR_MASK -#define MACFCR_CLEAR_MASK ETH_MACFCR_CLEAR_MASK -#define DMAOMR_CLEAR_MASK ETH_DMAOMR_CLEAR_MASK - -#define ETH_MMCCR 0x00000100U -#define ETH_MMCRIR 0x00000104U -#define ETH_MMCTIR 0x00000108U -#define ETH_MMCRIMR 0x0000010CU -#define ETH_MMCTIMR 0x00000110U -#define ETH_MMCTGFSCCR 0x0000014CU -#define ETH_MMCTGFMSCCR 0x00000150U -#define ETH_MMCTGFCR 0x00000168U -#define ETH_MMCRFCECR 0x00000194U -#define ETH_MMCRFAECR 0x00000198U -#define ETH_MMCRGUFCR 0x000001C4U - -#define ETH_MAC_TXFIFO_FULL 0x02000000U /* Tx FIFO full */ -#define ETH_MAC_TXFIFONOT_EMPTY 0x01000000U /* Tx FIFO not empty */ -#define ETH_MAC_TXFIFO_WRITE_ACTIVE 0x00400000U /* Tx FIFO write active */ -#define ETH_MAC_TXFIFO_IDLE 0x00000000U /* Tx FIFO read status: Idle */ -#define ETH_MAC_TXFIFO_READ 0x00100000U /* Tx FIFO read status: Read (transferring data to the MAC transmitter) */ -#define ETH_MAC_TXFIFO_WAITING 0x00200000U /* Tx FIFO read status: Waiting for TxStatus from MAC transmitter */ -#define ETH_MAC_TXFIFO_WRITING 0x00300000U /* Tx FIFO read status: Writing the received TxStatus or flushing the TxFIFO */ -#define ETH_MAC_TRANSMISSION_PAUSE 0x00080000U /* MAC transmitter in pause */ -#define ETH_MAC_TRANSMITFRAMECONTROLLER_IDLE 0x00000000U /* MAC transmit frame controller: Idle */ -#define ETH_MAC_TRANSMITFRAMECONTROLLER_WAITING 0x00020000U /* MAC transmit frame controller: Waiting for Status of previous frame or IFG/backoff period to be over */ -#define ETH_MAC_TRANSMITFRAMECONTROLLER_GENRATING_PCF 0x00040000U /* MAC transmit frame controller: Generating and transmitting a Pause control frame (in full duplex mode) */ -#define ETH_MAC_TRANSMITFRAMECONTROLLER_TRANSFERRING 0x00060000U /* MAC transmit frame controller: Transferring input frame for transmission */ -#define ETH_MAC_MII_TRANSMIT_ACTIVE 0x00010000U /* MAC MII transmit engine active */ -#define ETH_MAC_RXFIFO_EMPTY 0x00000000U /* Rx FIFO fill level: empty */ -#define ETH_MAC_RXFIFO_BELOW_THRESHOLD 0x00000100U /* Rx FIFO fill level: fill-level below flow-control de-activate threshold */ -#define ETH_MAC_RXFIFO_ABOVE_THRESHOLD 0x00000200U /* Rx FIFO fill level: fill-level above flow-control activate threshold */ -#define ETH_MAC_RXFIFO_FULL 0x00000300U /* Rx FIFO fill level: full */ -#if defined(STM32F1) -#else -#define ETH_MAC_READCONTROLLER_IDLE 0x00000000U /* Rx FIFO read controller IDLE state */ -#define ETH_MAC_READCONTROLLER_READING_DATA 0x00000020U /* Rx FIFO read controller Reading frame data */ -#define ETH_MAC_READCONTROLLER_READING_STATUS 0x00000040U /* Rx FIFO read controller Reading frame status (or time-stamp) */ -#endif -#define ETH_MAC_READCONTROLLER_FLUSHING 0x00000060U /* Rx FIFO read controller Flushing the frame data and status */ -#define ETH_MAC_RXFIFO_WRITE_ACTIVE 0x00000010U /* Rx FIFO write controller active */ -#define ETH_MAC_SMALL_FIFO_NOTACTIVE 0x00000000U /* MAC small FIFO read / write controllers not active */ -#define ETH_MAC_SMALL_FIFO_READ_ACTIVE 0x00000002U /* MAC small FIFO read controller active */ -#define ETH_MAC_SMALL_FIFO_WRITE_ACTIVE 0x00000004U /* MAC small FIFO write controller active */ -#define ETH_MAC_SMALL_FIFO_RW_ACTIVE 0x00000006U /* MAC small FIFO read / write controllers active */ -#define ETH_MAC_MII_RECEIVE_PROTOCOL_ACTIVE 0x00000001U /* MAC MII receive protocol engine active */ - -/** - * @} - */ - -/** @defgroup HAL_DCMI_Aliased_Defines HAL DCMI Aliased Defines maintained for legacy purpose - * @{ - */ -#define HAL_DCMI_ERROR_OVF HAL_DCMI_ERROR_OVR -#define DCMI_IT_OVF DCMI_IT_OVR -#define DCMI_FLAG_OVFRI DCMI_FLAG_OVRRI -#define DCMI_FLAG_OVFMI DCMI_FLAG_OVRMI - -#define HAL_DCMI_ConfigCROP HAL_DCMI_ConfigCrop -#define HAL_DCMI_EnableCROP HAL_DCMI_EnableCrop -#define HAL_DCMI_DisableCROP HAL_DCMI_DisableCrop - -/** - * @} - */ - -#if defined(STM32L4) || defined(STM32F7) || defined(STM32F427xx) || defined(STM32F437xx) \ - || defined(STM32F429xx) || defined(STM32F439xx) || defined(STM32F469xx) || defined(STM32F479xx) \ - || defined(STM32H7) -/** @defgroup HAL_DMA2D_Aliased_Defines HAL DMA2D Aliased Defines maintained for legacy purpose - * @{ - */ -#define DMA2D_ARGB8888 DMA2D_OUTPUT_ARGB8888 -#define DMA2D_RGB888 DMA2D_OUTPUT_RGB888 -#define DMA2D_RGB565 DMA2D_OUTPUT_RGB565 -#define DMA2D_ARGB1555 DMA2D_OUTPUT_ARGB1555 -#define DMA2D_ARGB4444 DMA2D_OUTPUT_ARGB4444 - -#define CM_ARGB8888 DMA2D_INPUT_ARGB8888 -#define CM_RGB888 DMA2D_INPUT_RGB888 -#define CM_RGB565 DMA2D_INPUT_RGB565 -#define CM_ARGB1555 DMA2D_INPUT_ARGB1555 -#define CM_ARGB4444 DMA2D_INPUT_ARGB4444 -#define CM_L8 DMA2D_INPUT_L8 -#define CM_AL44 DMA2D_INPUT_AL44 -#define CM_AL88 DMA2D_INPUT_AL88 -#define CM_L4 DMA2D_INPUT_L4 -#define CM_A8 DMA2D_INPUT_A8 -#define CM_A4 DMA2D_INPUT_A4 -/** - * @} - */ -#endif /* STM32L4 || STM32F7 || STM32F4 || STM32H7 */ - -/** @defgroup HAL_PPP_Aliased_Defines HAL PPP Aliased Defines maintained for legacy purpose - * @{ - */ - -/** - * @} - */ - -/* Exported functions --------------------------------------------------------*/ - -/** @defgroup HAL_CRYP_Aliased_Functions HAL CRYP Aliased Functions maintained for legacy purpose - * @{ - */ -#define HAL_CRYP_ComputationCpltCallback HAL_CRYPEx_ComputationCpltCallback -/** - * @} - */ - -/** @defgroup HAL_HASH_Aliased_Functions HAL HASH Aliased Functions maintained for legacy purpose - * @{ - */ -#define HAL_HASH_STATETypeDef HAL_HASH_StateTypeDef -#define HAL_HASHPhaseTypeDef HAL_HASH_PhaseTypeDef -#define HAL_HMAC_MD5_Finish HAL_HASH_MD5_Finish -#define HAL_HMAC_SHA1_Finish HAL_HASH_SHA1_Finish -#define HAL_HMAC_SHA224_Finish HAL_HASH_SHA224_Finish -#define HAL_HMAC_SHA256_Finish HAL_HASH_SHA256_Finish - -/*HASH Algorithm Selection*/ - -#define HASH_AlgoSelection_SHA1 HASH_ALGOSELECTION_SHA1 -#define HASH_AlgoSelection_SHA224 HASH_ALGOSELECTION_SHA224 -#define HASH_AlgoSelection_SHA256 HASH_ALGOSELECTION_SHA256 -#define HASH_AlgoSelection_MD5 HASH_ALGOSELECTION_MD5 - -#define HASH_AlgoMode_HASH HASH_ALGOMODE_HASH -#define HASH_AlgoMode_HMAC HASH_ALGOMODE_HMAC - -#define HASH_HMACKeyType_ShortKey HASH_HMAC_KEYTYPE_SHORTKEY -#define HASH_HMACKeyType_LongKey HASH_HMAC_KEYTYPE_LONGKEY -/** - * @} - */ - -/** @defgroup HAL_Aliased_Functions HAL Generic Aliased Functions maintained for legacy purpose - * @{ - */ -#define HAL_EnableDBGSleepMode HAL_DBGMCU_EnableDBGSleepMode -#define HAL_DisableDBGSleepMode HAL_DBGMCU_DisableDBGSleepMode -#define HAL_EnableDBGStopMode HAL_DBGMCU_EnableDBGStopMode -#define HAL_DisableDBGStopMode HAL_DBGMCU_DisableDBGStopMode -#define HAL_EnableDBGStandbyMode HAL_DBGMCU_EnableDBGStandbyMode -#define HAL_DisableDBGStandbyMode HAL_DBGMCU_DisableDBGStandbyMode -#define HAL_DBG_LowPowerConfig(Periph, cmd) (((cmd)==ENABLE)? HAL_DBGMCU_DBG_EnableLowPowerConfig(Periph) : HAL_DBGMCU_DBG_DisableLowPowerConfig(Periph)) -#define HAL_VREFINT_OutputSelect HAL_SYSCFG_VREFINT_OutputSelect -#define HAL_Lock_Cmd(cmd) (((cmd)==ENABLE) ? HAL_SYSCFG_Enable_Lock_VREFINT() : HAL_SYSCFG_Disable_Lock_VREFINT()) -#if defined(STM32L0) -#else -#define HAL_VREFINT_Cmd(cmd) (((cmd)==ENABLE)? HAL_SYSCFG_EnableVREFINT() : HAL_SYSCFG_DisableVREFINT()) -#endif -#define HAL_ADC_EnableBuffer_Cmd(cmd) (((cmd)==ENABLE) ? HAL_ADCEx_EnableVREFINT() : HAL_ADCEx_DisableVREFINT()) -#define HAL_ADC_EnableBufferSensor_Cmd(cmd) (((cmd)==ENABLE) ? HAL_ADCEx_EnableVREFINTTempSensor() : HAL_ADCEx_DisableVREFINTTempSensor()) -/** - * @} - */ - -/** @defgroup HAL_FLASH_Aliased_Functions HAL FLASH Aliased Functions maintained for legacy purpose - * @{ - */ -#define FLASH_HalfPageProgram HAL_FLASHEx_HalfPageProgram -#define FLASH_EnableRunPowerDown HAL_FLASHEx_EnableRunPowerDown -#define FLASH_DisableRunPowerDown HAL_FLASHEx_DisableRunPowerDown -#define HAL_DATA_EEPROMEx_Unlock HAL_FLASHEx_DATAEEPROM_Unlock -#define HAL_DATA_EEPROMEx_Lock HAL_FLASHEx_DATAEEPROM_Lock -#define HAL_DATA_EEPROMEx_Erase HAL_FLASHEx_DATAEEPROM_Erase -#define HAL_DATA_EEPROMEx_Program HAL_FLASHEx_DATAEEPROM_Program - - /** - * @} - */ - -/** @defgroup HAL_I2C_Aliased_Functions HAL I2C Aliased Functions maintained for legacy purpose - * @{ - */ -#define HAL_I2CEx_AnalogFilter_Config HAL_I2CEx_ConfigAnalogFilter -#define HAL_I2CEx_DigitalFilter_Config HAL_I2CEx_ConfigDigitalFilter -#define HAL_FMPI2CEx_AnalogFilter_Config HAL_FMPI2CEx_ConfigAnalogFilter -#define HAL_FMPI2CEx_DigitalFilter_Config HAL_FMPI2CEx_ConfigDigitalFilter - -#define HAL_I2CFastModePlusConfig(SYSCFG_I2CFastModePlus, cmd) (((cmd)==ENABLE)? HAL_I2CEx_EnableFastModePlus(SYSCFG_I2CFastModePlus): HAL_I2CEx_DisableFastModePlus(SYSCFG_I2CFastModePlus)) - -#if defined(STM32H7) || defined(STM32WB) || defined(STM32G0) || defined(STM32F4) || defined(STM32F7) -#define HAL_I2C_Master_Sequential_Transmit_IT HAL_I2C_Master_Seq_Transmit_IT -#define HAL_I2C_Master_Sequential_Receive_IT HAL_I2C_Master_Seq_Receive_IT -#define HAL_I2C_Slave_Sequential_Transmit_IT HAL_I2C_Slave_Seq_Transmit_IT -#define HAL_I2C_Slave_Sequential_Receive_IT HAL_I2C_Slave_Seq_Receive_IT -#define HAL_I2C_Master_Sequential_Transmit_DMA HAL_I2C_Master_Seq_Transmit_DMA -#define HAL_I2C_Master_Sequential_Receive_DMA HAL_I2C_Master_Seq_Receive_DMA -#define HAL_I2C_Slave_Sequential_Transmit_DMA HAL_I2C_Slave_Seq_Transmit_DMA -#define HAL_I2C_Slave_Sequential_Receive_DMA HAL_I2C_Slave_Seq_Receive_DMA -#endif /* STM32H7 || STM32WB || STM32G0 || STM32F4 || STM32F7 */ - -#if defined(STM32F4) -#define HAL_FMPI2C_Master_Sequential_Transmit_IT HAL_FMPI2C_Master_Seq_Transmit_IT -#define HAL_FMPI2C_Master_Sequential_Receive_IT HAL_FMPI2C_Master_Seq_Receive_IT -#define HAL_FMPI2C_Slave_Sequential_Transmit_IT HAL_FMPI2C_Slave_Seq_Transmit_IT -#define HAL_FMPI2C_Slave_Sequential_Receive_IT HAL_FMPI2C_Slave_Seq_Receive_IT -#define HAL_FMPI2C_Master_Sequential_Transmit_DMA HAL_FMPI2C_Master_Seq_Transmit_DMA -#define HAL_FMPI2C_Master_Sequential_Receive_DMA HAL_FMPI2C_Master_Seq_Receive_DMA -#define HAL_FMPI2C_Slave_Sequential_Transmit_DMA HAL_FMPI2C_Slave_Seq_Transmit_DMA -#define HAL_FMPI2C_Slave_Sequential_Receive_DMA HAL_FMPI2C_Slave_Seq_Receive_DMA -#endif /* STM32F4 */ - /** - * @} - */ - -/** @defgroup HAL_PWR_Aliased HAL PWR Aliased maintained for legacy purpose - * @{ - */ -#define HAL_PWR_PVDConfig HAL_PWR_ConfigPVD -#define HAL_PWR_DisableBkUpReg HAL_PWREx_DisableBkUpReg -#define HAL_PWR_DisableFlashPowerDown HAL_PWREx_DisableFlashPowerDown -#define HAL_PWR_DisableVddio2Monitor HAL_PWREx_DisableVddio2Monitor -#define HAL_PWR_EnableBkUpReg HAL_PWREx_EnableBkUpReg -#define HAL_PWR_EnableFlashPowerDown HAL_PWREx_EnableFlashPowerDown -#define HAL_PWR_EnableVddio2Monitor HAL_PWREx_EnableVddio2Monitor -#define HAL_PWR_PVD_PVM_IRQHandler HAL_PWREx_PVD_PVM_IRQHandler -#define HAL_PWR_PVDLevelConfig HAL_PWR_ConfigPVD -#define HAL_PWR_Vddio2Monitor_IRQHandler HAL_PWREx_Vddio2Monitor_IRQHandler -#define HAL_PWR_Vddio2MonitorCallback HAL_PWREx_Vddio2MonitorCallback -#define HAL_PWREx_ActivateOverDrive HAL_PWREx_EnableOverDrive -#define HAL_PWREx_DeactivateOverDrive HAL_PWREx_DisableOverDrive -#define HAL_PWREx_DisableSDADCAnalog HAL_PWREx_DisableSDADC -#define HAL_PWREx_EnableSDADCAnalog HAL_PWREx_EnableSDADC -#define HAL_PWREx_PVMConfig HAL_PWREx_ConfigPVM - -#define PWR_MODE_NORMAL PWR_PVD_MODE_NORMAL -#define PWR_MODE_IT_RISING PWR_PVD_MODE_IT_RISING -#define PWR_MODE_IT_FALLING PWR_PVD_MODE_IT_FALLING -#define PWR_MODE_IT_RISING_FALLING PWR_PVD_MODE_IT_RISING_FALLING -#define PWR_MODE_EVENT_RISING PWR_PVD_MODE_EVENT_RISING -#define PWR_MODE_EVENT_FALLING PWR_PVD_MODE_EVENT_FALLING -#define PWR_MODE_EVENT_RISING_FALLING PWR_PVD_MODE_EVENT_RISING_FALLING - -#define CR_OFFSET_BB PWR_CR_OFFSET_BB -#define CSR_OFFSET_BB PWR_CSR_OFFSET_BB -#define PMODE_BIT_NUMBER VOS_BIT_NUMBER -#define CR_PMODE_BB CR_VOS_BB - -#define DBP_BitNumber DBP_BIT_NUMBER -#define PVDE_BitNumber PVDE_BIT_NUMBER -#define PMODE_BitNumber PMODE_BIT_NUMBER -#define EWUP_BitNumber EWUP_BIT_NUMBER -#define FPDS_BitNumber FPDS_BIT_NUMBER -#define ODEN_BitNumber ODEN_BIT_NUMBER -#define ODSWEN_BitNumber ODSWEN_BIT_NUMBER -#define MRLVDS_BitNumber MRLVDS_BIT_NUMBER -#define LPLVDS_BitNumber LPLVDS_BIT_NUMBER -#define BRE_BitNumber BRE_BIT_NUMBER - -#define PWR_MODE_EVT PWR_PVD_MODE_NORMAL - - /** - * @} - */ - -/** @defgroup HAL_SMBUS_Aliased_Functions HAL SMBUS Aliased Functions maintained for legacy purpose - * @{ - */ -#define HAL_SMBUS_Slave_Listen_IT HAL_SMBUS_EnableListen_IT -#define HAL_SMBUS_SlaveAddrCallback HAL_SMBUS_AddrCallback -#define HAL_SMBUS_SlaveListenCpltCallback HAL_SMBUS_ListenCpltCallback -/** - * @} - */ - -/** @defgroup HAL_SPI_Aliased_Functions HAL SPI Aliased Functions maintained for legacy purpose - * @{ - */ -#define HAL_SPI_FlushRxFifo HAL_SPIEx_FlushRxFifo -/** - * @} - */ - -/** @defgroup HAL_TIM_Aliased_Functions HAL TIM Aliased Functions maintained for legacy purpose - * @{ - */ -#define HAL_TIM_DMADelayPulseCplt TIM_DMADelayPulseCplt -#define HAL_TIM_DMAError TIM_DMAError -#define HAL_TIM_DMACaptureCplt TIM_DMACaptureCplt -#define HAL_TIMEx_DMACommutationCplt TIMEx_DMACommutationCplt -#if defined(STM32H7) || defined(STM32G0) || defined(STM32F7) || defined(STM32F4) || defined(STM32L0) -#define HAL_TIM_SlaveConfigSynchronization HAL_TIM_SlaveConfigSynchro -#define HAL_TIM_SlaveConfigSynchronization_IT HAL_TIM_SlaveConfigSynchro_IT -#define HAL_TIMEx_CommutationCallback HAL_TIMEx_CommutCallback -#define HAL_TIMEx_ConfigCommutationEvent HAL_TIMEx_ConfigCommutEvent -#define HAL_TIMEx_ConfigCommutationEvent_IT HAL_TIMEx_ConfigCommutEvent_IT -#define HAL_TIMEx_ConfigCommutationEvent_DMA HAL_TIMEx_ConfigCommutEvent_DMA -#endif /* STM32H7 || STM32G0 || STM32F7 || STM32F4 || STM32L0 */ -/** - * @} - */ - -/** @defgroup HAL_UART_Aliased_Functions HAL UART Aliased Functions maintained for legacy purpose - * @{ - */ -#define HAL_UART_WakeupCallback HAL_UARTEx_WakeupCallback -/** - * @} - */ - -/** @defgroup HAL_LTDC_Aliased_Functions HAL LTDC Aliased Functions maintained for legacy purpose - * @{ - */ -#define HAL_LTDC_LineEvenCallback HAL_LTDC_LineEventCallback -#define HAL_LTDC_Relaod HAL_LTDC_Reload -#define HAL_LTDC_StructInitFromVideoConfig HAL_LTDCEx_StructInitFromVideoConfig -#define HAL_LTDC_StructInitFromAdaptedCommandConfig HAL_LTDCEx_StructInitFromAdaptedCommandConfig -/** - * @} - */ - - -/** @defgroup HAL_PPP_Aliased_Functions HAL PPP Aliased Functions maintained for legacy purpose - * @{ - */ - -/** - * @} - */ - -/* Exported macros ------------------------------------------------------------*/ - -/** @defgroup HAL_AES_Aliased_Macros HAL CRYP Aliased Macros maintained for legacy purpose - * @{ - */ -#define AES_IT_CC CRYP_IT_CC -#define AES_IT_ERR CRYP_IT_ERR -#define AES_FLAG_CCF CRYP_FLAG_CCF -/** - * @} - */ - -/** @defgroup HAL_Aliased_Macros HAL Generic Aliased Macros maintained for legacy purpose - * @{ - */ -#define __HAL_GET_BOOT_MODE __HAL_SYSCFG_GET_BOOT_MODE -#define __HAL_REMAPMEMORY_FLASH __HAL_SYSCFG_REMAPMEMORY_FLASH -#define __HAL_REMAPMEMORY_SYSTEMFLASH __HAL_SYSCFG_REMAPMEMORY_SYSTEMFLASH -#define __HAL_REMAPMEMORY_SRAM __HAL_SYSCFG_REMAPMEMORY_SRAM -#define __HAL_REMAPMEMORY_FMC __HAL_SYSCFG_REMAPMEMORY_FMC -#define __HAL_REMAPMEMORY_FMC_SDRAM __HAL_SYSCFG_REMAPMEMORY_FMC_SDRAM -#define __HAL_REMAPMEMORY_FSMC __HAL_SYSCFG_REMAPMEMORY_FSMC -#define __HAL_REMAPMEMORY_QUADSPI __HAL_SYSCFG_REMAPMEMORY_QUADSPI -#define __HAL_FMC_BANK __HAL_SYSCFG_FMC_BANK -#define __HAL_GET_FLAG __HAL_SYSCFG_GET_FLAG -#define __HAL_CLEAR_FLAG __HAL_SYSCFG_CLEAR_FLAG -#define __HAL_VREFINT_OUT_ENABLE __HAL_SYSCFG_VREFINT_OUT_ENABLE -#define __HAL_VREFINT_OUT_DISABLE __HAL_SYSCFG_VREFINT_OUT_DISABLE -#define __HAL_SYSCFG_SRAM2_WRP_ENABLE __HAL_SYSCFG_SRAM2_WRP_0_31_ENABLE - -#define SYSCFG_FLAG_VREF_READY SYSCFG_FLAG_VREFINT_READY -#define SYSCFG_FLAG_RC48 RCC_FLAG_HSI48 -#define IS_SYSCFG_FASTMODEPLUS_CONFIG IS_I2C_FASTMODEPLUS -#define UFB_MODE_BitNumber UFB_MODE_BIT_NUMBER -#define CMP_PD_BitNumber CMP_PD_BIT_NUMBER - -/** - * @} - */ - - -/** @defgroup HAL_ADC_Aliased_Macros HAL ADC Aliased Macros maintained for legacy purpose - * @{ - */ -#define __ADC_ENABLE __HAL_ADC_ENABLE -#define __ADC_DISABLE __HAL_ADC_DISABLE -#define __HAL_ADC_ENABLING_CONDITIONS ADC_ENABLING_CONDITIONS -#define __HAL_ADC_DISABLING_CONDITIONS ADC_DISABLING_CONDITIONS -#define __HAL_ADC_IS_ENABLED ADC_IS_ENABLE -#define __ADC_IS_ENABLED ADC_IS_ENABLE -#define __HAL_ADC_IS_SOFTWARE_START_REGULAR ADC_IS_SOFTWARE_START_REGULAR -#define __HAL_ADC_IS_SOFTWARE_START_INJECTED ADC_IS_SOFTWARE_START_INJECTED -#define __HAL_ADC_IS_CONVERSION_ONGOING_REGULAR_INJECTED ADC_IS_CONVERSION_ONGOING_REGULAR_INJECTED -#define __HAL_ADC_IS_CONVERSION_ONGOING_REGULAR ADC_IS_CONVERSION_ONGOING_REGULAR -#define __HAL_ADC_IS_CONVERSION_ONGOING_INJECTED ADC_IS_CONVERSION_ONGOING_INJECTED -#define __HAL_ADC_IS_CONVERSION_ONGOING ADC_IS_CONVERSION_ONGOING -#define __HAL_ADC_CLEAR_ERRORCODE ADC_CLEAR_ERRORCODE - -#define __HAL_ADC_GET_RESOLUTION ADC_GET_RESOLUTION -#define __HAL_ADC_JSQR_RK ADC_JSQR_RK -#define __HAL_ADC_CFGR_AWD1CH ADC_CFGR_AWD1CH_SHIFT -#define __HAL_ADC_CFGR_AWD23CR ADC_CFGR_AWD23CR -#define __HAL_ADC_CFGR_INJECT_AUTO_CONVERSION ADC_CFGR_INJECT_AUTO_CONVERSION -#define __HAL_ADC_CFGR_INJECT_CONTEXT_QUEUE ADC_CFGR_INJECT_CONTEXT_QUEUE -#define __HAL_ADC_CFGR_INJECT_DISCCONTINUOUS ADC_CFGR_INJECT_DISCCONTINUOUS -#define __HAL_ADC_CFGR_REG_DISCCONTINUOUS ADC_CFGR_REG_DISCCONTINUOUS -#define __HAL_ADC_CFGR_DISCONTINUOUS_NUM ADC_CFGR_DISCONTINUOUS_NUM -#define __HAL_ADC_CFGR_AUTOWAIT ADC_CFGR_AUTOWAIT -#define __HAL_ADC_CFGR_CONTINUOUS ADC_CFGR_CONTINUOUS -#define __HAL_ADC_CFGR_OVERRUN ADC_CFGR_OVERRUN -#define __HAL_ADC_CFGR_DMACONTREQ ADC_CFGR_DMACONTREQ -#define __HAL_ADC_CFGR_EXTSEL ADC_CFGR_EXTSEL_SET -#define __HAL_ADC_JSQR_JEXTSEL ADC_JSQR_JEXTSEL_SET -#define __HAL_ADC_OFR_CHANNEL ADC_OFR_CHANNEL -#define __HAL_ADC_DIFSEL_CHANNEL ADC_DIFSEL_CHANNEL -#define __HAL_ADC_CALFACT_DIFF_SET ADC_CALFACT_DIFF_SET -#define __HAL_ADC_CALFACT_DIFF_GET ADC_CALFACT_DIFF_GET -#define __HAL_ADC_TRX_HIGHTHRESHOLD ADC_TRX_HIGHTHRESHOLD - -#define __HAL_ADC_OFFSET_SHIFT_RESOLUTION ADC_OFFSET_SHIFT_RESOLUTION -#define __HAL_ADC_AWD1THRESHOLD_SHIFT_RESOLUTION ADC_AWD1THRESHOLD_SHIFT_RESOLUTION -#define __HAL_ADC_AWD23THRESHOLD_SHIFT_RESOLUTION ADC_AWD23THRESHOLD_SHIFT_RESOLUTION -#define __HAL_ADC_COMMON_REGISTER ADC_COMMON_REGISTER -#define __HAL_ADC_COMMON_CCR_MULTI ADC_COMMON_CCR_MULTI -#define __HAL_ADC_MULTIMODE_IS_ENABLED ADC_MULTIMODE_IS_ENABLE -#define __ADC_MULTIMODE_IS_ENABLED ADC_MULTIMODE_IS_ENABLE -#define __HAL_ADC_NONMULTIMODE_OR_MULTIMODEMASTER ADC_NONMULTIMODE_OR_MULTIMODEMASTER -#define __HAL_ADC_COMMON_ADC_OTHER ADC_COMMON_ADC_OTHER -#define __HAL_ADC_MULTI_SLAVE ADC_MULTI_SLAVE - -#define __HAL_ADC_SQR1_L ADC_SQR1_L_SHIFT -#define __HAL_ADC_JSQR_JL ADC_JSQR_JL_SHIFT -#define __HAL_ADC_JSQR_RK_JL ADC_JSQR_RK_JL -#define __HAL_ADC_CR1_DISCONTINUOUS_NUM ADC_CR1_DISCONTINUOUS_NUM -#define __HAL_ADC_CR1_SCAN ADC_CR1_SCAN_SET -#define __HAL_ADC_CONVCYCLES_MAX_RANGE ADC_CONVCYCLES_MAX_RANGE -#define __HAL_ADC_CLOCK_PRESCALER_RANGE ADC_CLOCK_PRESCALER_RANGE -#define __HAL_ADC_GET_CLOCK_PRESCALER ADC_GET_CLOCK_PRESCALER - -#define __HAL_ADC_SQR1 ADC_SQR1 -#define __HAL_ADC_SMPR1 ADC_SMPR1 -#define __HAL_ADC_SMPR2 ADC_SMPR2 -#define __HAL_ADC_SQR3_RK ADC_SQR3_RK -#define __HAL_ADC_SQR2_RK ADC_SQR2_RK -#define __HAL_ADC_SQR1_RK ADC_SQR1_RK -#define __HAL_ADC_CR2_CONTINUOUS ADC_CR2_CONTINUOUS -#define __HAL_ADC_CR1_DISCONTINUOUS ADC_CR1_DISCONTINUOUS -#define __HAL_ADC_CR1_SCANCONV ADC_CR1_SCANCONV -#define __HAL_ADC_CR2_EOCSelection ADC_CR2_EOCSelection -#define __HAL_ADC_CR2_DMAContReq ADC_CR2_DMAContReq -#define __HAL_ADC_JSQR ADC_JSQR - -#define __HAL_ADC_CHSELR_CHANNEL ADC_CHSELR_CHANNEL -#define __HAL_ADC_CFGR1_REG_DISCCONTINUOUS ADC_CFGR1_REG_DISCCONTINUOUS -#define __HAL_ADC_CFGR1_AUTOOFF ADC_CFGR1_AUTOOFF -#define __HAL_ADC_CFGR1_AUTOWAIT ADC_CFGR1_AUTOWAIT -#define __HAL_ADC_CFGR1_CONTINUOUS ADC_CFGR1_CONTINUOUS -#define __HAL_ADC_CFGR1_OVERRUN ADC_CFGR1_OVERRUN -#define __HAL_ADC_CFGR1_SCANDIR ADC_CFGR1_SCANDIR -#define __HAL_ADC_CFGR1_DMACONTREQ ADC_CFGR1_DMACONTREQ - -/** - * @} - */ - -/** @defgroup HAL_DAC_Aliased_Macros HAL DAC Aliased Macros maintained for legacy purpose - * @{ - */ -#define __HAL_DHR12R1_ALIGNEMENT DAC_DHR12R1_ALIGNMENT -#define __HAL_DHR12R2_ALIGNEMENT DAC_DHR12R2_ALIGNMENT -#define __HAL_DHR12RD_ALIGNEMENT DAC_DHR12RD_ALIGNMENT -#define IS_DAC_GENERATE_WAVE IS_DAC_WAVE - -/** - * @} - */ - -/** @defgroup HAL_DBGMCU_Aliased_Macros HAL DBGMCU Aliased Macros maintained for legacy purpose - * @{ - */ -#define __HAL_FREEZE_TIM1_DBGMCU __HAL_DBGMCU_FREEZE_TIM1 -#define __HAL_UNFREEZE_TIM1_DBGMCU __HAL_DBGMCU_UNFREEZE_TIM1 -#define __HAL_FREEZE_TIM2_DBGMCU __HAL_DBGMCU_FREEZE_TIM2 -#define __HAL_UNFREEZE_TIM2_DBGMCU __HAL_DBGMCU_UNFREEZE_TIM2 -#define __HAL_FREEZE_TIM3_DBGMCU __HAL_DBGMCU_FREEZE_TIM3 -#define __HAL_UNFREEZE_TIM3_DBGMCU __HAL_DBGMCU_UNFREEZE_TIM3 -#define __HAL_FREEZE_TIM4_DBGMCU __HAL_DBGMCU_FREEZE_TIM4 -#define __HAL_UNFREEZE_TIM4_DBGMCU __HAL_DBGMCU_UNFREEZE_TIM4 -#define __HAL_FREEZE_TIM5_DBGMCU __HAL_DBGMCU_FREEZE_TIM5 -#define __HAL_UNFREEZE_TIM5_DBGMCU __HAL_DBGMCU_UNFREEZE_TIM5 -#define __HAL_FREEZE_TIM6_DBGMCU __HAL_DBGMCU_FREEZE_TIM6 -#define __HAL_UNFREEZE_TIM6_DBGMCU __HAL_DBGMCU_UNFREEZE_TIM6 -#define __HAL_FREEZE_TIM7_DBGMCU __HAL_DBGMCU_FREEZE_TIM7 -#define __HAL_UNFREEZE_TIM7_DBGMCU __HAL_DBGMCU_UNFREEZE_TIM7 -#define __HAL_FREEZE_TIM8_DBGMCU __HAL_DBGMCU_FREEZE_TIM8 -#define __HAL_UNFREEZE_TIM8_DBGMCU __HAL_DBGMCU_UNFREEZE_TIM8 - -#define __HAL_FREEZE_TIM9_DBGMCU __HAL_DBGMCU_FREEZE_TIM9 -#define __HAL_UNFREEZE_TIM9_DBGMCU __HAL_DBGMCU_UNFREEZE_TIM9 -#define __HAL_FREEZE_TIM10_DBGMCU __HAL_DBGMCU_FREEZE_TIM10 -#define __HAL_UNFREEZE_TIM10_DBGMCU __HAL_DBGMCU_UNFREEZE_TIM10 -#define __HAL_FREEZE_TIM11_DBGMCU __HAL_DBGMCU_FREEZE_TIM11 -#define __HAL_UNFREEZE_TIM11_DBGMCU __HAL_DBGMCU_UNFREEZE_TIM11 -#define __HAL_FREEZE_TIM12_DBGMCU __HAL_DBGMCU_FREEZE_TIM12 -#define __HAL_UNFREEZE_TIM12_DBGMCU __HAL_DBGMCU_UNFREEZE_TIM12 -#define __HAL_FREEZE_TIM13_DBGMCU __HAL_DBGMCU_FREEZE_TIM13 -#define __HAL_UNFREEZE_TIM13_DBGMCU __HAL_DBGMCU_UNFREEZE_TIM13 -#define __HAL_FREEZE_TIM14_DBGMCU __HAL_DBGMCU_FREEZE_TIM14 -#define __HAL_UNFREEZE_TIM14_DBGMCU __HAL_DBGMCU_UNFREEZE_TIM14 -#define __HAL_FREEZE_CAN2_DBGMCU __HAL_DBGMCU_FREEZE_CAN2 -#define __HAL_UNFREEZE_CAN2_DBGMCU __HAL_DBGMCU_UNFREEZE_CAN2 - - -#define __HAL_FREEZE_TIM15_DBGMCU __HAL_DBGMCU_FREEZE_TIM15 -#define __HAL_UNFREEZE_TIM15_DBGMCU __HAL_DBGMCU_UNFREEZE_TIM15 -#define __HAL_FREEZE_TIM16_DBGMCU __HAL_DBGMCU_FREEZE_TIM16 -#define __HAL_UNFREEZE_TIM16_DBGMCU __HAL_DBGMCU_UNFREEZE_TIM16 -#define __HAL_FREEZE_TIM17_DBGMCU __HAL_DBGMCU_FREEZE_TIM17 -#define __HAL_UNFREEZE_TIM17_DBGMCU __HAL_DBGMCU_UNFREEZE_TIM17 -#define __HAL_FREEZE_RTC_DBGMCU __HAL_DBGMCU_FREEZE_RTC -#define __HAL_UNFREEZE_RTC_DBGMCU __HAL_DBGMCU_UNFREEZE_RTC -#if defined(STM32H7) - #define __HAL_FREEZE_WWDG_DBGMCU __HAL_DBGMCU_FREEZE_WWDG1 - #define __HAL_UNFREEZE_WWDG_DBGMCU __HAL_DBGMCU_UnFreeze_WWDG1 - #define __HAL_FREEZE_IWDG_DBGMCU __HAL_DBGMCU_FREEZE_IWDG1 - #define __HAL_UNFREEZE_IWDG_DBGMCU __HAL_DBGMCU_UnFreeze_IWDG1 -#else - #define __HAL_FREEZE_WWDG_DBGMCU __HAL_DBGMCU_FREEZE_WWDG - #define __HAL_UNFREEZE_WWDG_DBGMCU __HAL_DBGMCU_UNFREEZE_WWDG - #define __HAL_FREEZE_IWDG_DBGMCU __HAL_DBGMCU_FREEZE_IWDG - #define __HAL_UNFREEZE_IWDG_DBGMCU __HAL_DBGMCU_UNFREEZE_IWDG -#endif /* STM32H7 */ -#define __HAL_FREEZE_I2C1_TIMEOUT_DBGMCU __HAL_DBGMCU_FREEZE_I2C1_TIMEOUT -#define __HAL_UNFREEZE_I2C1_TIMEOUT_DBGMCU __HAL_DBGMCU_UNFREEZE_I2C1_TIMEOUT -#define __HAL_FREEZE_I2C2_TIMEOUT_DBGMCU __HAL_DBGMCU_FREEZE_I2C2_TIMEOUT -#define __HAL_UNFREEZE_I2C2_TIMEOUT_DBGMCU __HAL_DBGMCU_UNFREEZE_I2C2_TIMEOUT -#define __HAL_FREEZE_I2C3_TIMEOUT_DBGMCU __HAL_DBGMCU_FREEZE_I2C3_TIMEOUT -#define __HAL_UNFREEZE_I2C3_TIMEOUT_DBGMCU __HAL_DBGMCU_UNFREEZE_I2C3_TIMEOUT -#define __HAL_FREEZE_CAN1_DBGMCU __HAL_DBGMCU_FREEZE_CAN1 -#define __HAL_UNFREEZE_CAN1_DBGMCU __HAL_DBGMCU_UNFREEZE_CAN1 -#define __HAL_FREEZE_LPTIM1_DBGMCU __HAL_DBGMCU_FREEZE_LPTIM1 -#define __HAL_UNFREEZE_LPTIM1_DBGMCU __HAL_DBGMCU_UNFREEZE_LPTIM1 -#define __HAL_FREEZE_LPTIM2_DBGMCU __HAL_DBGMCU_FREEZE_LPTIM2 -#define __HAL_UNFREEZE_LPTIM2_DBGMCU __HAL_DBGMCU_UNFREEZE_LPTIM2 - -/** - * @} - */ - -/** @defgroup HAL_COMP_Aliased_Macros HAL COMP Aliased Macros maintained for legacy purpose - * @{ - */ -#if defined(STM32F3) -#define COMP_START __HAL_COMP_ENABLE -#define COMP_STOP __HAL_COMP_DISABLE -#define COMP_LOCK __HAL_COMP_LOCK - -#if defined(STM32F301x8) || defined(STM32F302x8) || defined(STM32F318xx) || defined(STM32F303x8) || defined(STM32F334x8) || defined(STM32F328xx) -#define __HAL_COMP_EXTI_RISING_IT_ENABLE(__EXTILINE__) (((__EXTILINE__) == COMP_EXTI_LINE_COMP2) ? __HAL_COMP_COMP2_EXTI_ENABLE_RISING_EDGE() : \ - ((__EXTILINE__) == COMP_EXTI_LINE_COMP4) ? __HAL_COMP_COMP4_EXTI_ENABLE_RISING_EDGE() : \ - __HAL_COMP_COMP6_EXTI_ENABLE_RISING_EDGE()) -#define __HAL_COMP_EXTI_RISING_IT_DISABLE(__EXTILINE__) (((__EXTILINE__) == COMP_EXTI_LINE_COMP2) ? __HAL_COMP_COMP2_EXTI_DISABLE_RISING_EDGE() : \ - ((__EXTILINE__) == COMP_EXTI_LINE_COMP4) ? __HAL_COMP_COMP4_EXTI_DISABLE_RISING_EDGE() : \ - __HAL_COMP_COMP6_EXTI_DISABLE_RISING_EDGE()) -#define __HAL_COMP_EXTI_FALLING_IT_ENABLE(__EXTILINE__) (((__EXTILINE__) == COMP_EXTI_LINE_COMP2) ? __HAL_COMP_COMP2_EXTI_ENABLE_FALLING_EDGE() : \ - ((__EXTILINE__) == COMP_EXTI_LINE_COMP4) ? __HAL_COMP_COMP4_EXTI_ENABLE_FALLING_EDGE() : \ - __HAL_COMP_COMP6_EXTI_ENABLE_FALLING_EDGE()) -#define __HAL_COMP_EXTI_FALLING_IT_DISABLE(__EXTILINE__) (((__EXTILINE__) == COMP_EXTI_LINE_COMP2) ? __HAL_COMP_COMP2_EXTI_DISABLE_FALLING_EDGE() : \ - ((__EXTILINE__) == COMP_EXTI_LINE_COMP4) ? __HAL_COMP_COMP4_EXTI_DISABLE_FALLING_EDGE() : \ - __HAL_COMP_COMP6_EXTI_DISABLE_FALLING_EDGE()) -#define __HAL_COMP_EXTI_ENABLE_IT(__EXTILINE__) (((__EXTILINE__) == COMP_EXTI_LINE_COMP2) ? __HAL_COMP_COMP2_EXTI_ENABLE_IT() : \ - ((__EXTILINE__) == COMP_EXTI_LINE_COMP4) ? __HAL_COMP_COMP4_EXTI_ENABLE_IT() : \ - __HAL_COMP_COMP6_EXTI_ENABLE_IT()) -#define __HAL_COMP_EXTI_DISABLE_IT(__EXTILINE__) (((__EXTILINE__) == COMP_EXTI_LINE_COMP2) ? __HAL_COMP_COMP2_EXTI_DISABLE_IT() : \ - ((__EXTILINE__) == COMP_EXTI_LINE_COMP4) ? __HAL_COMP_COMP4_EXTI_DISABLE_IT() : \ - __HAL_COMP_COMP6_EXTI_DISABLE_IT()) -#define __HAL_COMP_EXTI_GET_FLAG(__FLAG__) (((__FLAG__) == COMP_EXTI_LINE_COMP2) ? __HAL_COMP_COMP2_EXTI_GET_FLAG() : \ - ((__FLAG__) == COMP_EXTI_LINE_COMP4) ? __HAL_COMP_COMP4_EXTI_GET_FLAG() : \ - __HAL_COMP_COMP6_EXTI_GET_FLAG()) -#define __HAL_COMP_EXTI_CLEAR_FLAG(__FLAG__) (((__FLAG__) == COMP_EXTI_LINE_COMP2) ? __HAL_COMP_COMP2_EXTI_CLEAR_FLAG() : \ - ((__FLAG__) == COMP_EXTI_LINE_COMP4) ? __HAL_COMP_COMP4_EXTI_CLEAR_FLAG() : \ - __HAL_COMP_COMP6_EXTI_CLEAR_FLAG()) -# endif -# if defined(STM32F302xE) || defined(STM32F302xC) -#define __HAL_COMP_EXTI_RISING_IT_ENABLE(__EXTILINE__) (((__EXTILINE__) == COMP_EXTI_LINE_COMP1) ? __HAL_COMP_COMP1_EXTI_ENABLE_RISING_EDGE() : \ - ((__EXTILINE__) == COMP_EXTI_LINE_COMP2) ? __HAL_COMP_COMP2_EXTI_ENABLE_RISING_EDGE() : \ - ((__EXTILINE__) == COMP_EXTI_LINE_COMP4) ? __HAL_COMP_COMP4_EXTI_ENABLE_RISING_EDGE() : \ - __HAL_COMP_COMP6_EXTI_ENABLE_RISING_EDGE()) -#define __HAL_COMP_EXTI_RISING_IT_DISABLE(__EXTILINE__) (((__EXTILINE__) == COMP_EXTI_LINE_COMP1) ? __HAL_COMP_COMP1_EXTI_DISABLE_RISING_EDGE() : \ - ((__EXTILINE__) == COMP_EXTI_LINE_COMP2) ? __HAL_COMP_COMP2_EXTI_DISABLE_RISING_EDGE() : \ - ((__EXTILINE__) == COMP_EXTI_LINE_COMP4) ? __HAL_COMP_COMP4_EXTI_DISABLE_RISING_EDGE() : \ - __HAL_COMP_COMP6_EXTI_DISABLE_RISING_EDGE()) -#define __HAL_COMP_EXTI_FALLING_IT_ENABLE(__EXTILINE__) (((__EXTILINE__) == COMP_EXTI_LINE_COMP1) ? __HAL_COMP_COMP1_EXTI_ENABLE_FALLING_EDGE() : \ - ((__EXTILINE__) == COMP_EXTI_LINE_COMP2) ? __HAL_COMP_COMP2_EXTI_ENABLE_FALLING_EDGE() : \ - ((__EXTILINE__) == COMP_EXTI_LINE_COMP4) ? __HAL_COMP_COMP4_EXTI_ENABLE_FALLING_EDGE() : \ - __HAL_COMP_COMP6_EXTI_ENABLE_FALLING_EDGE()) -#define __HAL_COMP_EXTI_FALLING_IT_DISABLE(__EXTILINE__) (((__EXTILINE__) == COMP_EXTI_LINE_COMP1) ? __HAL_COMP_COMP1_EXTI_DISABLE_FALLING_EDGE() : \ - ((__EXTILINE__) == COMP_EXTI_LINE_COMP2) ? __HAL_COMP_COMP2_EXTI_DISABLE_FALLING_EDGE() : \ - ((__EXTILINE__) == COMP_EXTI_LINE_COMP4) ? __HAL_COMP_COMP4_EXTI_DISABLE_FALLING_EDGE() : \ - __HAL_COMP_COMP6_EXTI_DISABLE_FALLING_EDGE()) -#define __HAL_COMP_EXTI_ENABLE_IT(__EXTILINE__) (((__EXTILINE__) == COMP_EXTI_LINE_COMP1) ? __HAL_COMP_COMP1_EXTI_ENABLE_IT() : \ - ((__EXTILINE__) == COMP_EXTI_LINE_COMP2) ? __HAL_COMP_COMP2_EXTI_ENABLE_IT() : \ - ((__EXTILINE__) == COMP_EXTI_LINE_COMP4) ? __HAL_COMP_COMP4_EXTI_ENABLE_IT() : \ - __HAL_COMP_COMP6_EXTI_ENABLE_IT()) -#define __HAL_COMP_EXTI_DISABLE_IT(__EXTILINE__) (((__EXTILINE__) == COMP_EXTI_LINE_COMP1) ? __HAL_COMP_COMP1_EXTI_DISABLE_IT() : \ - ((__EXTILINE__) == COMP_EXTI_LINE_COMP2) ? __HAL_COMP_COMP2_EXTI_DISABLE_IT() : \ - ((__EXTILINE__) == COMP_EXTI_LINE_COMP4) ? __HAL_COMP_COMP4_EXTI_DISABLE_IT() : \ - __HAL_COMP_COMP6_EXTI_DISABLE_IT()) -#define __HAL_COMP_EXTI_GET_FLAG(__FLAG__) (((__FLAG__) == COMP_EXTI_LINE_COMP1) ? __HAL_COMP_COMP1_EXTI_GET_FLAG() : \ - ((__FLAG__) == COMP_EXTI_LINE_COMP2) ? __HAL_COMP_COMP2_EXTI_GET_FLAG() : \ - ((__FLAG__) == COMP_EXTI_LINE_COMP4) ? __HAL_COMP_COMP4_EXTI_GET_FLAG() : \ - __HAL_COMP_COMP6_EXTI_GET_FLAG()) -#define __HAL_COMP_EXTI_CLEAR_FLAG(__FLAG__) (((__FLAG__) == COMP_EXTI_LINE_COMP1) ? __HAL_COMP_COMP1_EXTI_CLEAR_FLAG() : \ - ((__FLAG__) == COMP_EXTI_LINE_COMP2) ? __HAL_COMP_COMP2_EXTI_CLEAR_FLAG() : \ - ((__FLAG__) == COMP_EXTI_LINE_COMP4) ? __HAL_COMP_COMP4_EXTI_CLEAR_FLAG() : \ - __HAL_COMP_COMP6_EXTI_CLEAR_FLAG()) -# endif -# if defined(STM32F303xE) || defined(STM32F398xx) || defined(STM32F303xC) || defined(STM32F358xx) -#define __HAL_COMP_EXTI_RISING_IT_ENABLE(__EXTILINE__) (((__EXTILINE__) == COMP_EXTI_LINE_COMP1) ? __HAL_COMP_COMP1_EXTI_ENABLE_RISING_EDGE() : \ - ((__EXTILINE__) == COMP_EXTI_LINE_COMP2) ? __HAL_COMP_COMP2_EXTI_ENABLE_RISING_EDGE() : \ - ((__EXTILINE__) == COMP_EXTI_LINE_COMP3) ? __HAL_COMP_COMP3_EXTI_ENABLE_RISING_EDGE() : \ - ((__EXTILINE__) == COMP_EXTI_LINE_COMP4) ? __HAL_COMP_COMP4_EXTI_ENABLE_RISING_EDGE() : \ - ((__EXTILINE__) == COMP_EXTI_LINE_COMP5) ? __HAL_COMP_COMP5_EXTI_ENABLE_RISING_EDGE() : \ - ((__EXTILINE__) == COMP_EXTI_LINE_COMP6) ? __HAL_COMP_COMP6_EXTI_ENABLE_RISING_EDGE() : \ - __HAL_COMP_COMP7_EXTI_ENABLE_RISING_EDGE()) -#define __HAL_COMP_EXTI_RISING_IT_DISABLE(__EXTILINE__) (((__EXTILINE__) == COMP_EXTI_LINE_COMP1) ? __HAL_COMP_COMP1_EXTI_DISABLE_RISING_EDGE() : \ - ((__EXTILINE__) == COMP_EXTI_LINE_COMP2) ? __HAL_COMP_COMP2_EXTI_DISABLE_RISING_EDGE() : \ - ((__EXTILINE__) == COMP_EXTI_LINE_COMP3) ? __HAL_COMP_COMP3_EXTI_DISABLE_RISING_EDGE() : \ - ((__EXTILINE__) == COMP_EXTI_LINE_COMP4) ? __HAL_COMP_COMP4_EXTI_DISABLE_RISING_EDGE() : \ - ((__EXTILINE__) == COMP_EXTI_LINE_COMP5) ? __HAL_COMP_COMP5_EXTI_DISABLE_RISING_EDGE() : \ - ((__EXTILINE__) == COMP_EXTI_LINE_COMP6) ? __HAL_COMP_COMP6_EXTI_DISABLE_RISING_EDGE() : \ - __HAL_COMP_COMP7_EXTI_DISABLE_RISING_EDGE()) -#define __HAL_COMP_EXTI_FALLING_IT_ENABLE(__EXTILINE__) (((__EXTILINE__) == COMP_EXTI_LINE_COMP1) ? __HAL_COMP_COMP1_EXTI_ENABLE_FALLING_EDGE() : \ - ((__EXTILINE__) == COMP_EXTI_LINE_COMP2) ? __HAL_COMP_COMP2_EXTI_ENABLE_FALLING_EDGE() : \ - ((__EXTILINE__) == COMP_EXTI_LINE_COMP3) ? __HAL_COMP_COMP3_EXTI_ENABLE_FALLING_EDGE() : \ - ((__EXTILINE__) == COMP_EXTI_LINE_COMP4) ? __HAL_COMP_COMP4_EXTI_ENABLE_FALLING_EDGE() : \ - ((__EXTILINE__) == COMP_EXTI_LINE_COMP5) ? __HAL_COMP_COMP5_EXTI_ENABLE_FALLING_EDGE() : \ - ((__EXTILINE__) == COMP_EXTI_LINE_COMP6) ? __HAL_COMP_COMP6_EXTI_ENABLE_FALLING_EDGE() : \ - __HAL_COMP_COMP7_EXTI_ENABLE_FALLING_EDGE()) -#define __HAL_COMP_EXTI_FALLING_IT_DISABLE(__EXTILINE__) (((__EXTILINE__) == COMP_EXTI_LINE_COMP1) ? __HAL_COMP_COMP1_EXTI_DISABLE_FALLING_EDGE() : \ - ((__EXTILINE__) == COMP_EXTI_LINE_COMP2) ? __HAL_COMP_COMP2_EXTI_DISABLE_FALLING_EDGE() : \ - ((__EXTILINE__) == COMP_EXTI_LINE_COMP3) ? __HAL_COMP_COMP3_EXTI_DISABLE_FALLING_EDGE() : \ - ((__EXTILINE__) == COMP_EXTI_LINE_COMP4) ? __HAL_COMP_COMP4_EXTI_DISABLE_FALLING_EDGE() : \ - ((__EXTILINE__) == COMP_EXTI_LINE_COMP5) ? __HAL_COMP_COMP5_EXTI_DISABLE_FALLING_EDGE() : \ - ((__EXTILINE__) == COMP_EXTI_LINE_COMP6) ? __HAL_COMP_COMP6_EXTI_DISABLE_FALLING_EDGE() : \ - __HAL_COMP_COMP7_EXTI_DISABLE_FALLING_EDGE()) -#define __HAL_COMP_EXTI_ENABLE_IT(__EXTILINE__) (((__EXTILINE__) == COMP_EXTI_LINE_COMP1) ? __HAL_COMP_COMP1_EXTI_ENABLE_IT() : \ - ((__EXTILINE__) == COMP_EXTI_LINE_COMP2) ? __HAL_COMP_COMP2_EXTI_ENABLE_IT() : \ - ((__EXTILINE__) == COMP_EXTI_LINE_COMP3) ? __HAL_COMP_COMP3_EXTI_ENABLE_IT() : \ - ((__EXTILINE__) == COMP_EXTI_LINE_COMP4) ? __HAL_COMP_COMP4_EXTI_ENABLE_IT() : \ - ((__EXTILINE__) == COMP_EXTI_LINE_COMP5) ? __HAL_COMP_COMP5_EXTI_ENABLE_IT() : \ - ((__EXTILINE__) == COMP_EXTI_LINE_COMP6) ? __HAL_COMP_COMP6_EXTI_ENABLE_IT() : \ - __HAL_COMP_COMP7_EXTI_ENABLE_IT()) -#define __HAL_COMP_EXTI_DISABLE_IT(__EXTILINE__) (((__EXTILINE__) == COMP_EXTI_LINE_COMP1) ? __HAL_COMP_COMP1_EXTI_DISABLE_IT() : \ - ((__EXTILINE__) == COMP_EXTI_LINE_COMP2) ? __HAL_COMP_COMP2_EXTI_DISABLE_IT() : \ - ((__EXTILINE__) == COMP_EXTI_LINE_COMP3) ? __HAL_COMP_COMP3_EXTI_DISABLE_IT() : \ - ((__EXTILINE__) == COMP_EXTI_LINE_COMP4) ? __HAL_COMP_COMP4_EXTI_DISABLE_IT() : \ - ((__EXTILINE__) == COMP_EXTI_LINE_COMP5) ? __HAL_COMP_COMP5_EXTI_DISABLE_IT() : \ - ((__EXTILINE__) == COMP_EXTI_LINE_COMP6) ? __HAL_COMP_COMP6_EXTI_DISABLE_IT() : \ - __HAL_COMP_COMP7_EXTI_DISABLE_IT()) -#define __HAL_COMP_EXTI_GET_FLAG(__FLAG__) (((__FLAG__) == COMP_EXTI_LINE_COMP1) ? __HAL_COMP_COMP1_EXTI_GET_FLAG() : \ - ((__FLAG__) == COMP_EXTI_LINE_COMP2) ? __HAL_COMP_COMP2_EXTI_GET_FLAG() : \ - ((__FLAG__) == COMP_EXTI_LINE_COMP3) ? __HAL_COMP_COMP3_EXTI_GET_FLAG() : \ - ((__FLAG__) == COMP_EXTI_LINE_COMP4) ? __HAL_COMP_COMP4_EXTI_GET_FLAG() : \ - ((__FLAG__) == COMP_EXTI_LINE_COMP5) ? __HAL_COMP_COMP5_EXTI_GET_FLAG() : \ - ((__FLAG__) == COMP_EXTI_LINE_COMP6) ? __HAL_COMP_COMP6_EXTI_GET_FLAG() : \ - __HAL_COMP_COMP7_EXTI_GET_FLAG()) -#define __HAL_COMP_EXTI_CLEAR_FLAG(__FLAG__) (((__FLAG__) == COMP_EXTI_LINE_COMP1) ? __HAL_COMP_COMP1_EXTI_CLEAR_FLAG() : \ - ((__FLAG__) == COMP_EXTI_LINE_COMP2) ? __HAL_COMP_COMP2_EXTI_CLEAR_FLAG() : \ - ((__FLAG__) == COMP_EXTI_LINE_COMP3) ? __HAL_COMP_COMP3_EXTI_CLEAR_FLAG() : \ - ((__FLAG__) == COMP_EXTI_LINE_COMP4) ? __HAL_COMP_COMP4_EXTI_CLEAR_FLAG() : \ - ((__FLAG__) == COMP_EXTI_LINE_COMP5) ? __HAL_COMP_COMP5_EXTI_CLEAR_FLAG() : \ - ((__FLAG__) == COMP_EXTI_LINE_COMP6) ? __HAL_COMP_COMP6_EXTI_CLEAR_FLAG() : \ - __HAL_COMP_COMP7_EXTI_CLEAR_FLAG()) -# endif -# if defined(STM32F373xC) ||defined(STM32F378xx) -#define __HAL_COMP_EXTI_RISING_IT_ENABLE(__EXTILINE__) (((__EXTILINE__) == COMP_EXTI_LINE_COMP1) ? __HAL_COMP_COMP1_EXTI_ENABLE_RISING_EDGE() : \ - __HAL_COMP_COMP2_EXTI_ENABLE_RISING_EDGE()) -#define __HAL_COMP_EXTI_RISING_IT_DISABLE(__EXTILINE__) (((__EXTILINE__) == COMP_EXTI_LINE_COMP1) ? __HAL_COMP_COMP1_EXTI_DISABLE_RISING_EDGE() : \ - __HAL_COMP_COMP2_EXTI_DISABLE_RISING_EDGE()) -#define __HAL_COMP_EXTI_FALLING_IT_ENABLE(__EXTILINE__) (((__EXTILINE__) == COMP_EXTI_LINE_COMP1) ? __HAL_COMP_COMP1_EXTI_ENABLE_FALLING_EDGE() : \ - __HAL_COMP_COMP2_EXTI_ENABLE_FALLING_EDGE()) -#define __HAL_COMP_EXTI_FALLING_IT_DISABLE(__EXTILINE__) (((__EXTILINE__) == COMP_EXTI_LINE_COMP1) ? __HAL_COMP_COMP1_EXTI_DISABLE_FALLING_EDGE() : \ - __HAL_COMP_COMP2_EXTI_DISABLE_FALLING_EDGE()) -#define __HAL_COMP_EXTI_ENABLE_IT(__EXTILINE__) (((__EXTILINE__) == COMP_EXTI_LINE_COMP1) ? __HAL_COMP_COMP1_EXTI_ENABLE_IT() : \ - __HAL_COMP_COMP2_EXTI_ENABLE_IT()) -#define __HAL_COMP_EXTI_DISABLE_IT(__EXTILINE__) (((__EXTILINE__) == COMP_EXTI_LINE_COMP1) ? __HAL_COMP_COMP1_EXTI_DISABLE_IT() : \ - __HAL_COMP_COMP2_EXTI_DISABLE_IT()) -#define __HAL_COMP_EXTI_GET_FLAG(__FLAG__) (((__FLAG__) == COMP_EXTI_LINE_COMP1) ? __HAL_COMP_COMP1_EXTI_GET_FLAG() : \ - __HAL_COMP_COMP2_EXTI_GET_FLAG()) -#define __HAL_COMP_EXTI_CLEAR_FLAG(__FLAG__) (((__FLAG__) == COMP_EXTI_LINE_COMP1) ? __HAL_COMP_COMP1_EXTI_CLEAR_FLAG() : \ - __HAL_COMP_COMP2_EXTI_CLEAR_FLAG()) -# endif -#else -#define __HAL_COMP_EXTI_RISING_IT_ENABLE(__EXTILINE__) (((__EXTILINE__) == COMP_EXTI_LINE_COMP1) ? __HAL_COMP_COMP1_EXTI_ENABLE_RISING_EDGE() : \ - __HAL_COMP_COMP2_EXTI_ENABLE_RISING_EDGE()) -#define __HAL_COMP_EXTI_RISING_IT_DISABLE(__EXTILINE__) (((__EXTILINE__) == COMP_EXTI_LINE_COMP1) ? __HAL_COMP_COMP1_EXTI_DISABLE_RISING_EDGE() : \ - __HAL_COMP_COMP2_EXTI_DISABLE_RISING_EDGE()) -#define __HAL_COMP_EXTI_FALLING_IT_ENABLE(__EXTILINE__) (((__EXTILINE__) == COMP_EXTI_LINE_COMP1) ? __HAL_COMP_COMP1_EXTI_ENABLE_FALLING_EDGE() : \ - __HAL_COMP_COMP2_EXTI_ENABLE_FALLING_EDGE()) -#define __HAL_COMP_EXTI_FALLING_IT_DISABLE(__EXTILINE__) (((__EXTILINE__) == COMP_EXTI_LINE_COMP1) ? __HAL_COMP_COMP1_EXTI_DISABLE_FALLING_EDGE() : \ - __HAL_COMP_COMP2_EXTI_DISABLE_FALLING_EDGE()) -#define __HAL_COMP_EXTI_ENABLE_IT(__EXTILINE__) (((__EXTILINE__) == COMP_EXTI_LINE_COMP1) ? __HAL_COMP_COMP1_EXTI_ENABLE_IT() : \ - __HAL_COMP_COMP2_EXTI_ENABLE_IT()) -#define __HAL_COMP_EXTI_DISABLE_IT(__EXTILINE__) (((__EXTILINE__) == COMP_EXTI_LINE_COMP1) ? __HAL_COMP_COMP1_EXTI_DISABLE_IT() : \ - __HAL_COMP_COMP2_EXTI_DISABLE_IT()) -#define __HAL_COMP_EXTI_GET_FLAG(__FLAG__) (((__FLAG__) == COMP_EXTI_LINE_COMP1) ? __HAL_COMP_COMP1_EXTI_GET_FLAG() : \ - __HAL_COMP_COMP2_EXTI_GET_FLAG()) -#define __HAL_COMP_EXTI_CLEAR_FLAG(__FLAG__) (((__FLAG__) == COMP_EXTI_LINE_COMP1) ? __HAL_COMP_COMP1_EXTI_CLEAR_FLAG() : \ - __HAL_COMP_COMP2_EXTI_CLEAR_FLAG()) -#endif - -#define __HAL_COMP_GET_EXTI_LINE COMP_GET_EXTI_LINE - -#if defined(STM32L0) || defined(STM32L4) -/* Note: On these STM32 families, the only argument of this macro */ -/* is COMP_FLAG_LOCK. */ -/* This macro is replaced by __HAL_COMP_IS_LOCKED with only HAL handle */ -/* argument. */ -#define __HAL_COMP_GET_FLAG(__HANDLE__, __FLAG__) (__HAL_COMP_IS_LOCKED(__HANDLE__)) -#endif -/** - * @} - */ - -#if defined(STM32L0) || defined(STM32L4) -/** @defgroup HAL_COMP_Aliased_Functions HAL COMP Aliased Functions maintained for legacy purpose - * @{ - */ -#define HAL_COMP_Start_IT HAL_COMP_Start /* Function considered as legacy as EXTI event or IT configuration is done into HAL_COMP_Init() */ -#define HAL_COMP_Stop_IT HAL_COMP_Stop /* Function considered as legacy as EXTI event or IT configuration is done into HAL_COMP_Init() */ -/** - * @} - */ -#endif - -/** @defgroup HAL_DAC_Aliased_Macros HAL DAC Aliased Macros maintained for legacy purpose - * @{ - */ - -#define IS_DAC_WAVE(WAVE) (((WAVE) == DAC_WAVE_NONE) || \ - ((WAVE) == DAC_WAVE_NOISE)|| \ - ((WAVE) == DAC_WAVE_TRIANGLE)) - -/** - * @} - */ - -/** @defgroup HAL_FLASH_Aliased_Macros HAL FLASH Aliased Macros maintained for legacy purpose - * @{ - */ - -#define IS_WRPAREA IS_OB_WRPAREA -#define IS_TYPEPROGRAM IS_FLASH_TYPEPROGRAM -#define IS_TYPEPROGRAMFLASH IS_FLASH_TYPEPROGRAM -#define IS_TYPEERASE IS_FLASH_TYPEERASE -#define IS_NBSECTORS IS_FLASH_NBSECTORS -#define IS_OB_WDG_SOURCE IS_OB_IWDG_SOURCE - -/** - * @} - */ - -/** @defgroup HAL_I2C_Aliased_Macros HAL I2C Aliased Macros maintained for legacy purpose - * @{ - */ - -#define __HAL_I2C_RESET_CR2 I2C_RESET_CR2 -#define __HAL_I2C_GENERATE_START I2C_GENERATE_START -#if defined(STM32F1) -#define __HAL_I2C_FREQ_RANGE I2C_FREQRANGE -#else -#define __HAL_I2C_FREQ_RANGE I2C_FREQ_RANGE -#endif /* STM32F1 */ -#define __HAL_I2C_RISE_TIME I2C_RISE_TIME -#define __HAL_I2C_SPEED_STANDARD I2C_SPEED_STANDARD -#define __HAL_I2C_SPEED_FAST I2C_SPEED_FAST -#define __HAL_I2C_SPEED I2C_SPEED -#define __HAL_I2C_7BIT_ADD_WRITE I2C_7BIT_ADD_WRITE -#define __HAL_I2C_7BIT_ADD_READ I2C_7BIT_ADD_READ -#define __HAL_I2C_10BIT_ADDRESS I2C_10BIT_ADDRESS -#define __HAL_I2C_10BIT_HEADER_WRITE I2C_10BIT_HEADER_WRITE -#define __HAL_I2C_10BIT_HEADER_READ I2C_10BIT_HEADER_READ -#define __HAL_I2C_MEM_ADD_MSB I2C_MEM_ADD_MSB -#define __HAL_I2C_MEM_ADD_LSB I2C_MEM_ADD_LSB -#define __HAL_I2C_FREQRANGE I2C_FREQRANGE -/** - * @} - */ - -/** @defgroup HAL_I2S_Aliased_Macros HAL I2S Aliased Macros maintained for legacy purpose - * @{ - */ - -#define IS_I2S_INSTANCE IS_I2S_ALL_INSTANCE -#define IS_I2S_INSTANCE_EXT IS_I2S_ALL_INSTANCE_EXT - -#if defined(STM32H7) - #define __HAL_I2S_CLEAR_FREFLAG __HAL_I2S_CLEAR_TIFREFLAG -#endif - -/** - * @} - */ - -/** @defgroup HAL_IRDA_Aliased_Macros HAL IRDA Aliased Macros maintained for legacy purpose - * @{ - */ - -#define __IRDA_DISABLE __HAL_IRDA_DISABLE -#define __IRDA_ENABLE __HAL_IRDA_ENABLE - -#define __HAL_IRDA_GETCLOCKSOURCE IRDA_GETCLOCKSOURCE -#define __HAL_IRDA_MASK_COMPUTATION IRDA_MASK_COMPUTATION -#define __IRDA_GETCLOCKSOURCE IRDA_GETCLOCKSOURCE -#define __IRDA_MASK_COMPUTATION IRDA_MASK_COMPUTATION - -#define IS_IRDA_ONEBIT_SAMPLE IS_IRDA_ONE_BIT_SAMPLE - - -/** - * @} - */ - - -/** @defgroup HAL_IWDG_Aliased_Macros HAL IWDG Aliased Macros maintained for legacy purpose - * @{ - */ -#define __HAL_IWDG_ENABLE_WRITE_ACCESS IWDG_ENABLE_WRITE_ACCESS -#define __HAL_IWDG_DISABLE_WRITE_ACCESS IWDG_DISABLE_WRITE_ACCESS -/** - * @} - */ - - -/** @defgroup HAL_LPTIM_Aliased_Macros HAL LPTIM Aliased Macros maintained for legacy purpose - * @{ - */ - -#define __HAL_LPTIM_ENABLE_INTERRUPT __HAL_LPTIM_ENABLE_IT -#define __HAL_LPTIM_DISABLE_INTERRUPT __HAL_LPTIM_DISABLE_IT -#define __HAL_LPTIM_GET_ITSTATUS __HAL_LPTIM_GET_IT_SOURCE - -/** - * @} - */ - - -/** @defgroup HAL_OPAMP_Aliased_Macros HAL OPAMP Aliased Macros maintained for legacy purpose - * @{ - */ -#define __OPAMP_CSR_OPAXPD OPAMP_CSR_OPAXPD -#define __OPAMP_CSR_S3SELX OPAMP_CSR_S3SELX -#define __OPAMP_CSR_S4SELX OPAMP_CSR_S4SELX -#define __OPAMP_CSR_S5SELX OPAMP_CSR_S5SELX -#define __OPAMP_CSR_S6SELX OPAMP_CSR_S6SELX -#define __OPAMP_CSR_OPAXCAL_L OPAMP_CSR_OPAXCAL_L -#define __OPAMP_CSR_OPAXCAL_H OPAMP_CSR_OPAXCAL_H -#define __OPAMP_CSR_OPAXLPM OPAMP_CSR_OPAXLPM -#define __OPAMP_CSR_ALL_SWITCHES OPAMP_CSR_ALL_SWITCHES -#define __OPAMP_CSR_ANAWSELX OPAMP_CSR_ANAWSELX -#define __OPAMP_CSR_OPAXCALOUT OPAMP_CSR_OPAXCALOUT -#define __OPAMP_OFFSET_TRIM_BITSPOSITION OPAMP_OFFSET_TRIM_BITSPOSITION -#define __OPAMP_OFFSET_TRIM_SET OPAMP_OFFSET_TRIM_SET - -/** - * @} - */ - - -/** @defgroup HAL_PWR_Aliased_Macros HAL PWR Aliased Macros maintained for legacy purpose - * @{ - */ -#define __HAL_PVD_EVENT_DISABLE __HAL_PWR_PVD_EXTI_DISABLE_EVENT -#define __HAL_PVD_EVENT_ENABLE __HAL_PWR_PVD_EXTI_ENABLE_EVENT -#define __HAL_PVD_EXTI_FALLINGTRIGGER_DISABLE __HAL_PWR_PVD_EXTI_DISABLE_FALLING_EDGE -#define __HAL_PVD_EXTI_FALLINGTRIGGER_ENABLE __HAL_PWR_PVD_EXTI_ENABLE_FALLING_EDGE -#define __HAL_PVD_EXTI_RISINGTRIGGER_DISABLE __HAL_PWR_PVD_EXTI_DISABLE_RISING_EDGE -#define __HAL_PVD_EXTI_RISINGTRIGGER_ENABLE __HAL_PWR_PVD_EXTI_ENABLE_RISING_EDGE -#define __HAL_PVM_EVENT_DISABLE __HAL_PWR_PVM_EVENT_DISABLE -#define __HAL_PVM_EVENT_ENABLE __HAL_PWR_PVM_EVENT_ENABLE -#define __HAL_PVM_EXTI_FALLINGTRIGGER_DISABLE __HAL_PWR_PVM_EXTI_FALLINGTRIGGER_DISABLE -#define __HAL_PVM_EXTI_FALLINGTRIGGER_ENABLE __HAL_PWR_PVM_EXTI_FALLINGTRIGGER_ENABLE -#define __HAL_PVM_EXTI_RISINGTRIGGER_DISABLE __HAL_PWR_PVM_EXTI_RISINGTRIGGER_DISABLE -#define __HAL_PVM_EXTI_RISINGTRIGGER_ENABLE __HAL_PWR_PVM_EXTI_RISINGTRIGGER_ENABLE -#define __HAL_PWR_INTERNALWAKEUP_DISABLE HAL_PWREx_DisableInternalWakeUpLine -#define __HAL_PWR_INTERNALWAKEUP_ENABLE HAL_PWREx_EnableInternalWakeUpLine -#define __HAL_PWR_PULL_UP_DOWN_CONFIG_DISABLE HAL_PWREx_DisablePullUpPullDownConfig -#define __HAL_PWR_PULL_UP_DOWN_CONFIG_ENABLE HAL_PWREx_EnablePullUpPullDownConfig -#define __HAL_PWR_PVD_EXTI_CLEAR_EGDE_TRIGGER() do { __HAL_PWR_PVD_EXTI_DISABLE_RISING_EDGE();__HAL_PWR_PVD_EXTI_DISABLE_FALLING_EDGE(); } while(0) -#define __HAL_PWR_PVD_EXTI_EVENT_DISABLE __HAL_PWR_PVD_EXTI_DISABLE_EVENT -#define __HAL_PWR_PVD_EXTI_EVENT_ENABLE __HAL_PWR_PVD_EXTI_ENABLE_EVENT -#define __HAL_PWR_PVD_EXTI_FALLINGTRIGGER_DISABLE __HAL_PWR_PVD_EXTI_DISABLE_FALLING_EDGE -#define __HAL_PWR_PVD_EXTI_FALLINGTRIGGER_ENABLE __HAL_PWR_PVD_EXTI_ENABLE_FALLING_EDGE -#define __HAL_PWR_PVD_EXTI_RISINGTRIGGER_DISABLE __HAL_PWR_PVD_EXTI_DISABLE_RISING_EDGE -#define __HAL_PWR_PVD_EXTI_RISINGTRIGGER_ENABLE __HAL_PWR_PVD_EXTI_ENABLE_RISING_EDGE -#define __HAL_PWR_PVD_EXTI_SET_FALLING_EGDE_TRIGGER __HAL_PWR_PVD_EXTI_ENABLE_FALLING_EDGE -#define __HAL_PWR_PVD_EXTI_SET_RISING_EDGE_TRIGGER __HAL_PWR_PVD_EXTI_ENABLE_RISING_EDGE -#define __HAL_PWR_PVM_DISABLE() do { HAL_PWREx_DisablePVM1();HAL_PWREx_DisablePVM2();HAL_PWREx_DisablePVM3();HAL_PWREx_DisablePVM4(); } while(0) -#define __HAL_PWR_PVM_ENABLE() do { HAL_PWREx_EnablePVM1();HAL_PWREx_EnablePVM2();HAL_PWREx_EnablePVM3();HAL_PWREx_EnablePVM4(); } while(0) -#define __HAL_PWR_SRAM2CONTENT_PRESERVE_DISABLE HAL_PWREx_DisableSRAM2ContentRetention -#define __HAL_PWR_SRAM2CONTENT_PRESERVE_ENABLE HAL_PWREx_EnableSRAM2ContentRetention -#define __HAL_PWR_VDDIO2_DISABLE HAL_PWREx_DisableVddIO2 -#define __HAL_PWR_VDDIO2_ENABLE HAL_PWREx_EnableVddIO2 -#define __HAL_PWR_VDDIO2_EXTI_CLEAR_EGDE_TRIGGER __HAL_PWR_VDDIO2_EXTI_DISABLE_FALLING_EDGE -#define __HAL_PWR_VDDIO2_EXTI_SET_FALLING_EGDE_TRIGGER __HAL_PWR_VDDIO2_EXTI_ENABLE_FALLING_EDGE -#define __HAL_PWR_VDDUSB_DISABLE HAL_PWREx_DisableVddUSB -#define __HAL_PWR_VDDUSB_ENABLE HAL_PWREx_EnableVddUSB - -#if defined (STM32F4) -#define __HAL_PVD_EXTI_ENABLE_IT(PWR_EXTI_LINE_PVD) __HAL_PWR_PVD_EXTI_ENABLE_IT() -#define __HAL_PVD_EXTI_DISABLE_IT(PWR_EXTI_LINE_PVD) __HAL_PWR_PVD_EXTI_DISABLE_IT() -#define __HAL_PVD_EXTI_GET_FLAG(PWR_EXTI_LINE_PVD) __HAL_PWR_PVD_EXTI_GET_FLAG() -#define __HAL_PVD_EXTI_CLEAR_FLAG(PWR_EXTI_LINE_PVD) __HAL_PWR_PVD_EXTI_CLEAR_FLAG() -#define __HAL_PVD_EXTI_GENERATE_SWIT(PWR_EXTI_LINE_PVD) __HAL_PWR_PVD_EXTI_GENERATE_SWIT() -#else -#define __HAL_PVD_EXTI_CLEAR_FLAG __HAL_PWR_PVD_EXTI_CLEAR_FLAG -#define __HAL_PVD_EXTI_DISABLE_IT __HAL_PWR_PVD_EXTI_DISABLE_IT -#define __HAL_PVD_EXTI_ENABLE_IT __HAL_PWR_PVD_EXTI_ENABLE_IT -#define __HAL_PVD_EXTI_GENERATE_SWIT __HAL_PWR_PVD_EXTI_GENERATE_SWIT -#define __HAL_PVD_EXTI_GET_FLAG __HAL_PWR_PVD_EXTI_GET_FLAG -#endif /* STM32F4 */ -/** - * @} - */ - - -/** @defgroup HAL_RCC_Aliased HAL RCC Aliased maintained for legacy purpose - * @{ - */ - -#define RCC_StopWakeUpClock_MSI RCC_STOP_WAKEUPCLOCK_MSI -#define RCC_StopWakeUpClock_HSI RCC_STOP_WAKEUPCLOCK_HSI - -#define HAL_RCC_CCSCallback HAL_RCC_CSSCallback -#define HAL_RC48_EnableBuffer_Cmd(cmd) (((cmd)==ENABLE) ? HAL_RCCEx_EnableHSI48_VREFINT() : HAL_RCCEx_DisableHSI48_VREFINT()) - -#define __ADC_CLK_DISABLE __HAL_RCC_ADC_CLK_DISABLE -#define __ADC_CLK_ENABLE __HAL_RCC_ADC_CLK_ENABLE -#define __ADC_CLK_SLEEP_DISABLE __HAL_RCC_ADC_CLK_SLEEP_DISABLE -#define __ADC_CLK_SLEEP_ENABLE __HAL_RCC_ADC_CLK_SLEEP_ENABLE -#define __ADC_FORCE_RESET __HAL_RCC_ADC_FORCE_RESET -#define __ADC_RELEASE_RESET __HAL_RCC_ADC_RELEASE_RESET -#define __ADC1_CLK_DISABLE __HAL_RCC_ADC1_CLK_DISABLE -#define __ADC1_CLK_ENABLE __HAL_RCC_ADC1_CLK_ENABLE -#define __ADC1_FORCE_RESET __HAL_RCC_ADC1_FORCE_RESET -#define __ADC1_RELEASE_RESET __HAL_RCC_ADC1_RELEASE_RESET -#define __ADC1_CLK_SLEEP_ENABLE __HAL_RCC_ADC1_CLK_SLEEP_ENABLE -#define __ADC1_CLK_SLEEP_DISABLE __HAL_RCC_ADC1_CLK_SLEEP_DISABLE -#define __ADC2_CLK_DISABLE __HAL_RCC_ADC2_CLK_DISABLE -#define __ADC2_CLK_ENABLE __HAL_RCC_ADC2_CLK_ENABLE -#define __ADC2_FORCE_RESET __HAL_RCC_ADC2_FORCE_RESET -#define __ADC2_RELEASE_RESET __HAL_RCC_ADC2_RELEASE_RESET -#define __ADC3_CLK_DISABLE __HAL_RCC_ADC3_CLK_DISABLE -#define __ADC3_CLK_ENABLE __HAL_RCC_ADC3_CLK_ENABLE -#define __ADC3_FORCE_RESET __HAL_RCC_ADC3_FORCE_RESET -#define __ADC3_RELEASE_RESET __HAL_RCC_ADC3_RELEASE_RESET -#define __AES_CLK_DISABLE __HAL_RCC_AES_CLK_DISABLE -#define __AES_CLK_ENABLE __HAL_RCC_AES_CLK_ENABLE -#define __AES_CLK_SLEEP_DISABLE __HAL_RCC_AES_CLK_SLEEP_DISABLE -#define __AES_CLK_SLEEP_ENABLE __HAL_RCC_AES_CLK_SLEEP_ENABLE -#define __AES_FORCE_RESET __HAL_RCC_AES_FORCE_RESET -#define __AES_RELEASE_RESET __HAL_RCC_AES_RELEASE_RESET -#define __CRYP_CLK_SLEEP_ENABLE __HAL_RCC_CRYP_CLK_SLEEP_ENABLE -#define __CRYP_CLK_SLEEP_DISABLE __HAL_RCC_CRYP_CLK_SLEEP_DISABLE -#define __CRYP_CLK_ENABLE __HAL_RCC_CRYP_CLK_ENABLE -#define __CRYP_CLK_DISABLE __HAL_RCC_CRYP_CLK_DISABLE -#define __CRYP_FORCE_RESET __HAL_RCC_CRYP_FORCE_RESET -#define __CRYP_RELEASE_RESET __HAL_RCC_CRYP_RELEASE_RESET -#define __AFIO_CLK_DISABLE __HAL_RCC_AFIO_CLK_DISABLE -#define __AFIO_CLK_ENABLE __HAL_RCC_AFIO_CLK_ENABLE -#define __AFIO_FORCE_RESET __HAL_RCC_AFIO_FORCE_RESET -#define __AFIO_RELEASE_RESET __HAL_RCC_AFIO_RELEASE_RESET -#define __AHB_FORCE_RESET __HAL_RCC_AHB_FORCE_RESET -#define __AHB_RELEASE_RESET __HAL_RCC_AHB_RELEASE_RESET -#define __AHB1_FORCE_RESET __HAL_RCC_AHB1_FORCE_RESET -#define __AHB1_RELEASE_RESET __HAL_RCC_AHB1_RELEASE_RESET -#define __AHB2_FORCE_RESET __HAL_RCC_AHB2_FORCE_RESET -#define __AHB2_RELEASE_RESET __HAL_RCC_AHB2_RELEASE_RESET -#define __AHB3_FORCE_RESET __HAL_RCC_AHB3_FORCE_RESET -#define __AHB3_RELEASE_RESET __HAL_RCC_AHB3_RELEASE_RESET -#define __APB1_FORCE_RESET __HAL_RCC_APB1_FORCE_RESET -#define __APB1_RELEASE_RESET __HAL_RCC_APB1_RELEASE_RESET -#define __APB2_FORCE_RESET __HAL_RCC_APB2_FORCE_RESET -#define __APB2_RELEASE_RESET __HAL_RCC_APB2_RELEASE_RESET -#define __BKP_CLK_DISABLE __HAL_RCC_BKP_CLK_DISABLE -#define __BKP_CLK_ENABLE __HAL_RCC_BKP_CLK_ENABLE -#define __BKP_FORCE_RESET __HAL_RCC_BKP_FORCE_RESET -#define __BKP_RELEASE_RESET __HAL_RCC_BKP_RELEASE_RESET -#define __CAN1_CLK_DISABLE __HAL_RCC_CAN1_CLK_DISABLE -#define __CAN1_CLK_ENABLE __HAL_RCC_CAN1_CLK_ENABLE -#define __CAN1_CLK_SLEEP_DISABLE __HAL_RCC_CAN1_CLK_SLEEP_DISABLE -#define __CAN1_CLK_SLEEP_ENABLE __HAL_RCC_CAN1_CLK_SLEEP_ENABLE -#define __CAN1_FORCE_RESET __HAL_RCC_CAN1_FORCE_RESET -#define __CAN1_RELEASE_RESET __HAL_RCC_CAN1_RELEASE_RESET -#define __CAN_CLK_DISABLE __HAL_RCC_CAN1_CLK_DISABLE -#define __CAN_CLK_ENABLE __HAL_RCC_CAN1_CLK_ENABLE -#define __CAN_FORCE_RESET __HAL_RCC_CAN1_FORCE_RESET -#define __CAN_RELEASE_RESET __HAL_RCC_CAN1_RELEASE_RESET -#define __CAN2_CLK_DISABLE __HAL_RCC_CAN2_CLK_DISABLE -#define __CAN2_CLK_ENABLE __HAL_RCC_CAN2_CLK_ENABLE -#define __CAN2_FORCE_RESET __HAL_RCC_CAN2_FORCE_RESET -#define __CAN2_RELEASE_RESET __HAL_RCC_CAN2_RELEASE_RESET -#define __CEC_CLK_DISABLE __HAL_RCC_CEC_CLK_DISABLE -#define __CEC_CLK_ENABLE __HAL_RCC_CEC_CLK_ENABLE -#define __COMP_CLK_DISABLE __HAL_RCC_COMP_CLK_DISABLE -#define __COMP_CLK_ENABLE __HAL_RCC_COMP_CLK_ENABLE -#define __COMP_FORCE_RESET __HAL_RCC_COMP_FORCE_RESET -#define __COMP_RELEASE_RESET __HAL_RCC_COMP_RELEASE_RESET -#define __COMP_CLK_SLEEP_ENABLE __HAL_RCC_COMP_CLK_SLEEP_ENABLE -#define __COMP_CLK_SLEEP_DISABLE __HAL_RCC_COMP_CLK_SLEEP_DISABLE -#define __CEC_FORCE_RESET __HAL_RCC_CEC_FORCE_RESET -#define __CEC_RELEASE_RESET __HAL_RCC_CEC_RELEASE_RESET -#define __CRC_CLK_DISABLE __HAL_RCC_CRC_CLK_DISABLE -#define __CRC_CLK_ENABLE __HAL_RCC_CRC_CLK_ENABLE -#define __CRC_CLK_SLEEP_DISABLE __HAL_RCC_CRC_CLK_SLEEP_DISABLE -#define __CRC_CLK_SLEEP_ENABLE __HAL_RCC_CRC_CLK_SLEEP_ENABLE -#define __CRC_FORCE_RESET __HAL_RCC_CRC_FORCE_RESET -#define __CRC_RELEASE_RESET __HAL_RCC_CRC_RELEASE_RESET -#define __DAC_CLK_DISABLE __HAL_RCC_DAC_CLK_DISABLE -#define __DAC_CLK_ENABLE __HAL_RCC_DAC_CLK_ENABLE -#define __DAC_FORCE_RESET __HAL_RCC_DAC_FORCE_RESET -#define __DAC_RELEASE_RESET __HAL_RCC_DAC_RELEASE_RESET -#define __DAC1_CLK_DISABLE __HAL_RCC_DAC1_CLK_DISABLE -#define __DAC1_CLK_ENABLE __HAL_RCC_DAC1_CLK_ENABLE -#define __DAC1_CLK_SLEEP_DISABLE __HAL_RCC_DAC1_CLK_SLEEP_DISABLE -#define __DAC1_CLK_SLEEP_ENABLE __HAL_RCC_DAC1_CLK_SLEEP_ENABLE -#define __DAC1_FORCE_RESET __HAL_RCC_DAC1_FORCE_RESET -#define __DAC1_RELEASE_RESET __HAL_RCC_DAC1_RELEASE_RESET -#define __DBGMCU_CLK_ENABLE __HAL_RCC_DBGMCU_CLK_ENABLE -#define __DBGMCU_CLK_DISABLE __HAL_RCC_DBGMCU_CLK_DISABLE -#define __DBGMCU_FORCE_RESET __HAL_RCC_DBGMCU_FORCE_RESET -#define __DBGMCU_RELEASE_RESET __HAL_RCC_DBGMCU_RELEASE_RESET -#define __DFSDM_CLK_DISABLE __HAL_RCC_DFSDM_CLK_DISABLE -#define __DFSDM_CLK_ENABLE __HAL_RCC_DFSDM_CLK_ENABLE -#define __DFSDM_CLK_SLEEP_DISABLE __HAL_RCC_DFSDM_CLK_SLEEP_DISABLE -#define __DFSDM_CLK_SLEEP_ENABLE __HAL_RCC_DFSDM_CLK_SLEEP_ENABLE -#define __DFSDM_FORCE_RESET __HAL_RCC_DFSDM_FORCE_RESET -#define __DFSDM_RELEASE_RESET __HAL_RCC_DFSDM_RELEASE_RESET -#define __DMA1_CLK_DISABLE __HAL_RCC_DMA1_CLK_DISABLE -#define __DMA1_CLK_ENABLE __HAL_RCC_DMA1_CLK_ENABLE -#define __DMA1_CLK_SLEEP_DISABLE __HAL_RCC_DMA1_CLK_SLEEP_DISABLE -#define __DMA1_CLK_SLEEP_ENABLE __HAL_RCC_DMA1_CLK_SLEEP_ENABLE -#define __DMA1_FORCE_RESET __HAL_RCC_DMA1_FORCE_RESET -#define __DMA1_RELEASE_RESET __HAL_RCC_DMA1_RELEASE_RESET -#define __DMA2_CLK_DISABLE __HAL_RCC_DMA2_CLK_DISABLE -#define __DMA2_CLK_ENABLE __HAL_RCC_DMA2_CLK_ENABLE -#define __DMA2_CLK_SLEEP_DISABLE __HAL_RCC_DMA2_CLK_SLEEP_DISABLE -#define __DMA2_CLK_SLEEP_ENABLE __HAL_RCC_DMA2_CLK_SLEEP_ENABLE -#define __DMA2_FORCE_RESET __HAL_RCC_DMA2_FORCE_RESET -#define __DMA2_RELEASE_RESET __HAL_RCC_DMA2_RELEASE_RESET -#define __ETHMAC_CLK_DISABLE __HAL_RCC_ETHMAC_CLK_DISABLE -#define __ETHMAC_CLK_ENABLE __HAL_RCC_ETHMAC_CLK_ENABLE -#define __ETHMAC_FORCE_RESET __HAL_RCC_ETHMAC_FORCE_RESET -#define __ETHMAC_RELEASE_RESET __HAL_RCC_ETHMAC_RELEASE_RESET -#define __ETHMACRX_CLK_DISABLE __HAL_RCC_ETHMACRX_CLK_DISABLE -#define __ETHMACRX_CLK_ENABLE __HAL_RCC_ETHMACRX_CLK_ENABLE -#define __ETHMACTX_CLK_DISABLE __HAL_RCC_ETHMACTX_CLK_DISABLE -#define __ETHMACTX_CLK_ENABLE __HAL_RCC_ETHMACTX_CLK_ENABLE -#define __FIREWALL_CLK_DISABLE __HAL_RCC_FIREWALL_CLK_DISABLE -#define __FIREWALL_CLK_ENABLE __HAL_RCC_FIREWALL_CLK_ENABLE -#define __FLASH_CLK_DISABLE __HAL_RCC_FLASH_CLK_DISABLE -#define __FLASH_CLK_ENABLE __HAL_RCC_FLASH_CLK_ENABLE -#define __FLASH_CLK_SLEEP_DISABLE __HAL_RCC_FLASH_CLK_SLEEP_DISABLE -#define __FLASH_CLK_SLEEP_ENABLE __HAL_RCC_FLASH_CLK_SLEEP_ENABLE -#define __FLASH_FORCE_RESET __HAL_RCC_FLASH_FORCE_RESET -#define __FLASH_RELEASE_RESET __HAL_RCC_FLASH_RELEASE_RESET -#define __FLITF_CLK_DISABLE __HAL_RCC_FLITF_CLK_DISABLE -#define __FLITF_CLK_ENABLE __HAL_RCC_FLITF_CLK_ENABLE -#define __FLITF_FORCE_RESET __HAL_RCC_FLITF_FORCE_RESET -#define __FLITF_RELEASE_RESET __HAL_RCC_FLITF_RELEASE_RESET -#define __FLITF_CLK_SLEEP_ENABLE __HAL_RCC_FLITF_CLK_SLEEP_ENABLE -#define __FLITF_CLK_SLEEP_DISABLE __HAL_RCC_FLITF_CLK_SLEEP_DISABLE -#define __FMC_CLK_DISABLE __HAL_RCC_FMC_CLK_DISABLE -#define __FMC_CLK_ENABLE __HAL_RCC_FMC_CLK_ENABLE -#define __FMC_CLK_SLEEP_DISABLE __HAL_RCC_FMC_CLK_SLEEP_DISABLE -#define __FMC_CLK_SLEEP_ENABLE __HAL_RCC_FMC_CLK_SLEEP_ENABLE -#define __FMC_FORCE_RESET __HAL_RCC_FMC_FORCE_RESET -#define __FMC_RELEASE_RESET __HAL_RCC_FMC_RELEASE_RESET -#define __FSMC_CLK_DISABLE __HAL_RCC_FSMC_CLK_DISABLE -#define __FSMC_CLK_ENABLE __HAL_RCC_FSMC_CLK_ENABLE -#define __GPIOA_CLK_DISABLE __HAL_RCC_GPIOA_CLK_DISABLE -#define __GPIOA_CLK_ENABLE __HAL_RCC_GPIOA_CLK_ENABLE -#define __GPIOA_CLK_SLEEP_DISABLE __HAL_RCC_GPIOA_CLK_SLEEP_DISABLE -#define __GPIOA_CLK_SLEEP_ENABLE __HAL_RCC_GPIOA_CLK_SLEEP_ENABLE -#define __GPIOA_FORCE_RESET __HAL_RCC_GPIOA_FORCE_RESET -#define __GPIOA_RELEASE_RESET __HAL_RCC_GPIOA_RELEASE_RESET -#define __GPIOB_CLK_DISABLE __HAL_RCC_GPIOB_CLK_DISABLE -#define __GPIOB_CLK_ENABLE __HAL_RCC_GPIOB_CLK_ENABLE -#define __GPIOB_CLK_SLEEP_DISABLE __HAL_RCC_GPIOB_CLK_SLEEP_DISABLE -#define __GPIOB_CLK_SLEEP_ENABLE __HAL_RCC_GPIOB_CLK_SLEEP_ENABLE -#define __GPIOB_FORCE_RESET __HAL_RCC_GPIOB_FORCE_RESET -#define __GPIOB_RELEASE_RESET __HAL_RCC_GPIOB_RELEASE_RESET -#define __GPIOC_CLK_DISABLE __HAL_RCC_GPIOC_CLK_DISABLE -#define __GPIOC_CLK_ENABLE __HAL_RCC_GPIOC_CLK_ENABLE -#define __GPIOC_CLK_SLEEP_DISABLE __HAL_RCC_GPIOC_CLK_SLEEP_DISABLE -#define __GPIOC_CLK_SLEEP_ENABLE __HAL_RCC_GPIOC_CLK_SLEEP_ENABLE -#define __GPIOC_FORCE_RESET __HAL_RCC_GPIOC_FORCE_RESET -#define __GPIOC_RELEASE_RESET __HAL_RCC_GPIOC_RELEASE_RESET -#define __GPIOD_CLK_DISABLE __HAL_RCC_GPIOD_CLK_DISABLE -#define __GPIOD_CLK_ENABLE __HAL_RCC_GPIOD_CLK_ENABLE -#define __GPIOD_CLK_SLEEP_DISABLE __HAL_RCC_GPIOD_CLK_SLEEP_DISABLE -#define __GPIOD_CLK_SLEEP_ENABLE __HAL_RCC_GPIOD_CLK_SLEEP_ENABLE -#define __GPIOD_FORCE_RESET __HAL_RCC_GPIOD_FORCE_RESET -#define __GPIOD_RELEASE_RESET __HAL_RCC_GPIOD_RELEASE_RESET -#define __GPIOE_CLK_DISABLE __HAL_RCC_GPIOE_CLK_DISABLE -#define __GPIOE_CLK_ENABLE __HAL_RCC_GPIOE_CLK_ENABLE -#define __GPIOE_CLK_SLEEP_DISABLE __HAL_RCC_GPIOE_CLK_SLEEP_DISABLE -#define __GPIOE_CLK_SLEEP_ENABLE __HAL_RCC_GPIOE_CLK_SLEEP_ENABLE -#define __GPIOE_FORCE_RESET __HAL_RCC_GPIOE_FORCE_RESET -#define __GPIOE_RELEASE_RESET __HAL_RCC_GPIOE_RELEASE_RESET -#define __GPIOF_CLK_DISABLE __HAL_RCC_GPIOF_CLK_DISABLE -#define __GPIOF_CLK_ENABLE __HAL_RCC_GPIOF_CLK_ENABLE -#define __GPIOF_CLK_SLEEP_DISABLE __HAL_RCC_GPIOF_CLK_SLEEP_DISABLE -#define __GPIOF_CLK_SLEEP_ENABLE __HAL_RCC_GPIOF_CLK_SLEEP_ENABLE -#define __GPIOF_FORCE_RESET __HAL_RCC_GPIOF_FORCE_RESET -#define __GPIOF_RELEASE_RESET __HAL_RCC_GPIOF_RELEASE_RESET -#define __GPIOG_CLK_DISABLE __HAL_RCC_GPIOG_CLK_DISABLE -#define __GPIOG_CLK_ENABLE __HAL_RCC_GPIOG_CLK_ENABLE -#define __GPIOG_CLK_SLEEP_DISABLE __HAL_RCC_GPIOG_CLK_SLEEP_DISABLE -#define __GPIOG_CLK_SLEEP_ENABLE __HAL_RCC_GPIOG_CLK_SLEEP_ENABLE -#define __GPIOG_FORCE_RESET __HAL_RCC_GPIOG_FORCE_RESET -#define __GPIOG_RELEASE_RESET __HAL_RCC_GPIOG_RELEASE_RESET -#define __GPIOH_CLK_DISABLE __HAL_RCC_GPIOH_CLK_DISABLE -#define __GPIOH_CLK_ENABLE __HAL_RCC_GPIOH_CLK_ENABLE -#define __GPIOH_CLK_SLEEP_DISABLE __HAL_RCC_GPIOH_CLK_SLEEP_DISABLE -#define __GPIOH_CLK_SLEEP_ENABLE __HAL_RCC_GPIOH_CLK_SLEEP_ENABLE -#define __GPIOH_FORCE_RESET __HAL_RCC_GPIOH_FORCE_RESET -#define __GPIOH_RELEASE_RESET __HAL_RCC_GPIOH_RELEASE_RESET -#define __I2C1_CLK_DISABLE __HAL_RCC_I2C1_CLK_DISABLE -#define __I2C1_CLK_ENABLE __HAL_RCC_I2C1_CLK_ENABLE -#define __I2C1_CLK_SLEEP_DISABLE __HAL_RCC_I2C1_CLK_SLEEP_DISABLE -#define __I2C1_CLK_SLEEP_ENABLE __HAL_RCC_I2C1_CLK_SLEEP_ENABLE -#define __I2C1_FORCE_RESET __HAL_RCC_I2C1_FORCE_RESET -#define __I2C1_RELEASE_RESET __HAL_RCC_I2C1_RELEASE_RESET -#define __I2C2_CLK_DISABLE __HAL_RCC_I2C2_CLK_DISABLE -#define __I2C2_CLK_ENABLE __HAL_RCC_I2C2_CLK_ENABLE -#define __I2C2_CLK_SLEEP_DISABLE __HAL_RCC_I2C2_CLK_SLEEP_DISABLE -#define __I2C2_CLK_SLEEP_ENABLE __HAL_RCC_I2C2_CLK_SLEEP_ENABLE -#define __I2C2_FORCE_RESET __HAL_RCC_I2C2_FORCE_RESET -#define __I2C2_RELEASE_RESET __HAL_RCC_I2C2_RELEASE_RESET -#define __I2C3_CLK_DISABLE __HAL_RCC_I2C3_CLK_DISABLE -#define __I2C3_CLK_ENABLE __HAL_RCC_I2C3_CLK_ENABLE -#define __I2C3_CLK_SLEEP_DISABLE __HAL_RCC_I2C3_CLK_SLEEP_DISABLE -#define __I2C3_CLK_SLEEP_ENABLE __HAL_RCC_I2C3_CLK_SLEEP_ENABLE -#define __I2C3_FORCE_RESET __HAL_RCC_I2C3_FORCE_RESET -#define __I2C3_RELEASE_RESET __HAL_RCC_I2C3_RELEASE_RESET -#define __LCD_CLK_DISABLE __HAL_RCC_LCD_CLK_DISABLE -#define __LCD_CLK_ENABLE __HAL_RCC_LCD_CLK_ENABLE -#define __LCD_CLK_SLEEP_DISABLE __HAL_RCC_LCD_CLK_SLEEP_DISABLE -#define __LCD_CLK_SLEEP_ENABLE __HAL_RCC_LCD_CLK_SLEEP_ENABLE -#define __LCD_FORCE_RESET __HAL_RCC_LCD_FORCE_RESET -#define __LCD_RELEASE_RESET __HAL_RCC_LCD_RELEASE_RESET -#define __LPTIM1_CLK_DISABLE __HAL_RCC_LPTIM1_CLK_DISABLE -#define __LPTIM1_CLK_ENABLE __HAL_RCC_LPTIM1_CLK_ENABLE -#define __LPTIM1_CLK_SLEEP_DISABLE __HAL_RCC_LPTIM1_CLK_SLEEP_DISABLE -#define __LPTIM1_CLK_SLEEP_ENABLE __HAL_RCC_LPTIM1_CLK_SLEEP_ENABLE -#define __LPTIM1_FORCE_RESET __HAL_RCC_LPTIM1_FORCE_RESET -#define __LPTIM1_RELEASE_RESET __HAL_RCC_LPTIM1_RELEASE_RESET -#define __LPTIM2_CLK_DISABLE __HAL_RCC_LPTIM2_CLK_DISABLE -#define __LPTIM2_CLK_ENABLE __HAL_RCC_LPTIM2_CLK_ENABLE -#define __LPTIM2_CLK_SLEEP_DISABLE __HAL_RCC_LPTIM2_CLK_SLEEP_DISABLE -#define __LPTIM2_CLK_SLEEP_ENABLE __HAL_RCC_LPTIM2_CLK_SLEEP_ENABLE -#define __LPTIM2_FORCE_RESET __HAL_RCC_LPTIM2_FORCE_RESET -#define __LPTIM2_RELEASE_RESET __HAL_RCC_LPTIM2_RELEASE_RESET -#define __LPUART1_CLK_DISABLE __HAL_RCC_LPUART1_CLK_DISABLE -#define __LPUART1_CLK_ENABLE __HAL_RCC_LPUART1_CLK_ENABLE -#define __LPUART1_CLK_SLEEP_DISABLE __HAL_RCC_LPUART1_CLK_SLEEP_DISABLE -#define __LPUART1_CLK_SLEEP_ENABLE __HAL_RCC_LPUART1_CLK_SLEEP_ENABLE -#define __LPUART1_FORCE_RESET __HAL_RCC_LPUART1_FORCE_RESET -#define __LPUART1_RELEASE_RESET __HAL_RCC_LPUART1_RELEASE_RESET -#define __OPAMP_CLK_DISABLE __HAL_RCC_OPAMP_CLK_DISABLE -#define __OPAMP_CLK_ENABLE __HAL_RCC_OPAMP_CLK_ENABLE -#define __OPAMP_CLK_SLEEP_DISABLE __HAL_RCC_OPAMP_CLK_SLEEP_DISABLE -#define __OPAMP_CLK_SLEEP_ENABLE __HAL_RCC_OPAMP_CLK_SLEEP_ENABLE -#define __OPAMP_FORCE_RESET __HAL_RCC_OPAMP_FORCE_RESET -#define __OPAMP_RELEASE_RESET __HAL_RCC_OPAMP_RELEASE_RESET -#define __OTGFS_CLK_DISABLE __HAL_RCC_OTGFS_CLK_DISABLE -#define __OTGFS_CLK_ENABLE __HAL_RCC_OTGFS_CLK_ENABLE -#define __OTGFS_CLK_SLEEP_DISABLE __HAL_RCC_OTGFS_CLK_SLEEP_DISABLE -#define __OTGFS_CLK_SLEEP_ENABLE __HAL_RCC_OTGFS_CLK_SLEEP_ENABLE -#define __OTGFS_FORCE_RESET __HAL_RCC_OTGFS_FORCE_RESET -#define __OTGFS_RELEASE_RESET __HAL_RCC_OTGFS_RELEASE_RESET -#define __PWR_CLK_DISABLE __HAL_RCC_PWR_CLK_DISABLE -#define __PWR_CLK_ENABLE __HAL_RCC_PWR_CLK_ENABLE -#define __PWR_CLK_SLEEP_DISABLE __HAL_RCC_PWR_CLK_SLEEP_DISABLE -#define __PWR_CLK_SLEEP_ENABLE __HAL_RCC_PWR_CLK_SLEEP_ENABLE -#define __PWR_FORCE_RESET __HAL_RCC_PWR_FORCE_RESET -#define __PWR_RELEASE_RESET __HAL_RCC_PWR_RELEASE_RESET -#define __QSPI_CLK_DISABLE __HAL_RCC_QSPI_CLK_DISABLE -#define __QSPI_CLK_ENABLE __HAL_RCC_QSPI_CLK_ENABLE -#define __QSPI_CLK_SLEEP_DISABLE __HAL_RCC_QSPI_CLK_SLEEP_DISABLE -#define __QSPI_CLK_SLEEP_ENABLE __HAL_RCC_QSPI_CLK_SLEEP_ENABLE -#define __QSPI_FORCE_RESET __HAL_RCC_QSPI_FORCE_RESET -#define __QSPI_RELEASE_RESET __HAL_RCC_QSPI_RELEASE_RESET - -#if defined(STM32WB) -#define __HAL_RCC_QSPI_CLK_DISABLE __HAL_RCC_QUADSPI_CLK_DISABLE -#define __HAL_RCC_QSPI_CLK_ENABLE __HAL_RCC_QUADSPI_CLK_ENABLE -#define __HAL_RCC_QSPI_CLK_SLEEP_DISABLE __HAL_RCC_QUADSPI_CLK_SLEEP_DISABLE -#define __HAL_RCC_QSPI_CLK_SLEEP_ENABLE __HAL_RCC_QUADSPI_CLK_SLEEP_ENABLE -#define __HAL_RCC_QSPI_FORCE_RESET __HAL_RCC_QUADSPI_FORCE_RESET -#define __HAL_RCC_QSPI_RELEASE_RESET __HAL_RCC_QUADSPI_RELEASE_RESET -#define __HAL_RCC_QSPI_IS_CLK_ENABLED __HAL_RCC_QUADSPI_IS_CLK_ENABLED -#define __HAL_RCC_QSPI_IS_CLK_DISABLED __HAL_RCC_QUADSPI_IS_CLK_DISABLED -#define __HAL_RCC_QSPI_IS_CLK_SLEEP_ENABLED __HAL_RCC_QUADSPI_IS_CLK_SLEEP_ENABLED -#define __HAL_RCC_QSPI_IS_CLK_SLEEP_DISABLED __HAL_RCC_QUADSPI_IS_CLK_SLEEP_DISABLED -#define QSPI_IRQHandler QUADSPI_IRQHandler -#endif /* __HAL_RCC_QUADSPI_CLK_ENABLE */ - -#define __RNG_CLK_DISABLE __HAL_RCC_RNG_CLK_DISABLE -#define __RNG_CLK_ENABLE __HAL_RCC_RNG_CLK_ENABLE -#define __RNG_CLK_SLEEP_DISABLE __HAL_RCC_RNG_CLK_SLEEP_DISABLE -#define __RNG_CLK_SLEEP_ENABLE __HAL_RCC_RNG_CLK_SLEEP_ENABLE -#define __RNG_FORCE_RESET __HAL_RCC_RNG_FORCE_RESET -#define __RNG_RELEASE_RESET __HAL_RCC_RNG_RELEASE_RESET -#define __SAI1_CLK_DISABLE __HAL_RCC_SAI1_CLK_DISABLE -#define __SAI1_CLK_ENABLE __HAL_RCC_SAI1_CLK_ENABLE -#define __SAI1_CLK_SLEEP_DISABLE __HAL_RCC_SAI1_CLK_SLEEP_DISABLE -#define __SAI1_CLK_SLEEP_ENABLE __HAL_RCC_SAI1_CLK_SLEEP_ENABLE -#define __SAI1_FORCE_RESET __HAL_RCC_SAI1_FORCE_RESET -#define __SAI1_RELEASE_RESET __HAL_RCC_SAI1_RELEASE_RESET -#define __SAI2_CLK_DISABLE __HAL_RCC_SAI2_CLK_DISABLE -#define __SAI2_CLK_ENABLE __HAL_RCC_SAI2_CLK_ENABLE -#define __SAI2_CLK_SLEEP_DISABLE __HAL_RCC_SAI2_CLK_SLEEP_DISABLE -#define __SAI2_CLK_SLEEP_ENABLE __HAL_RCC_SAI2_CLK_SLEEP_ENABLE -#define __SAI2_FORCE_RESET __HAL_RCC_SAI2_FORCE_RESET -#define __SAI2_RELEASE_RESET __HAL_RCC_SAI2_RELEASE_RESET -#define __SDIO_CLK_DISABLE __HAL_RCC_SDIO_CLK_DISABLE -#define __SDIO_CLK_ENABLE __HAL_RCC_SDIO_CLK_ENABLE -#define __SDMMC_CLK_DISABLE __HAL_RCC_SDMMC_CLK_DISABLE -#define __SDMMC_CLK_ENABLE __HAL_RCC_SDMMC_CLK_ENABLE -#define __SDMMC_CLK_SLEEP_DISABLE __HAL_RCC_SDMMC_CLK_SLEEP_DISABLE -#define __SDMMC_CLK_SLEEP_ENABLE __HAL_RCC_SDMMC_CLK_SLEEP_ENABLE -#define __SDMMC_FORCE_RESET __HAL_RCC_SDMMC_FORCE_RESET -#define __SDMMC_RELEASE_RESET __HAL_RCC_SDMMC_RELEASE_RESET -#define __SPI1_CLK_DISABLE __HAL_RCC_SPI1_CLK_DISABLE -#define __SPI1_CLK_ENABLE __HAL_RCC_SPI1_CLK_ENABLE -#define __SPI1_CLK_SLEEP_DISABLE __HAL_RCC_SPI1_CLK_SLEEP_DISABLE -#define __SPI1_CLK_SLEEP_ENABLE __HAL_RCC_SPI1_CLK_SLEEP_ENABLE -#define __SPI1_FORCE_RESET __HAL_RCC_SPI1_FORCE_RESET -#define __SPI1_RELEASE_RESET __HAL_RCC_SPI1_RELEASE_RESET -#define __SPI2_CLK_DISABLE __HAL_RCC_SPI2_CLK_DISABLE -#define __SPI2_CLK_ENABLE __HAL_RCC_SPI2_CLK_ENABLE -#define __SPI2_CLK_SLEEP_DISABLE __HAL_RCC_SPI2_CLK_SLEEP_DISABLE -#define __SPI2_CLK_SLEEP_ENABLE __HAL_RCC_SPI2_CLK_SLEEP_ENABLE -#define __SPI2_FORCE_RESET __HAL_RCC_SPI2_FORCE_RESET -#define __SPI2_RELEASE_RESET __HAL_RCC_SPI2_RELEASE_RESET -#define __SPI3_CLK_DISABLE __HAL_RCC_SPI3_CLK_DISABLE -#define __SPI3_CLK_ENABLE __HAL_RCC_SPI3_CLK_ENABLE -#define __SPI3_CLK_SLEEP_DISABLE __HAL_RCC_SPI3_CLK_SLEEP_DISABLE -#define __SPI3_CLK_SLEEP_ENABLE __HAL_RCC_SPI3_CLK_SLEEP_ENABLE -#define __SPI3_FORCE_RESET __HAL_RCC_SPI3_FORCE_RESET -#define __SPI3_RELEASE_RESET __HAL_RCC_SPI3_RELEASE_RESET -#define __SRAM_CLK_DISABLE __HAL_RCC_SRAM_CLK_DISABLE -#define __SRAM_CLK_ENABLE __HAL_RCC_SRAM_CLK_ENABLE -#define __SRAM1_CLK_SLEEP_DISABLE __HAL_RCC_SRAM1_CLK_SLEEP_DISABLE -#define __SRAM1_CLK_SLEEP_ENABLE __HAL_RCC_SRAM1_CLK_SLEEP_ENABLE -#define __SRAM2_CLK_SLEEP_DISABLE __HAL_RCC_SRAM2_CLK_SLEEP_DISABLE -#define __SRAM2_CLK_SLEEP_ENABLE __HAL_RCC_SRAM2_CLK_SLEEP_ENABLE -#define __SWPMI1_CLK_DISABLE __HAL_RCC_SWPMI1_CLK_DISABLE -#define __SWPMI1_CLK_ENABLE __HAL_RCC_SWPMI1_CLK_ENABLE -#define __SWPMI1_CLK_SLEEP_DISABLE __HAL_RCC_SWPMI1_CLK_SLEEP_DISABLE -#define __SWPMI1_CLK_SLEEP_ENABLE __HAL_RCC_SWPMI1_CLK_SLEEP_ENABLE -#define __SWPMI1_FORCE_RESET __HAL_RCC_SWPMI1_FORCE_RESET -#define __SWPMI1_RELEASE_RESET __HAL_RCC_SWPMI1_RELEASE_RESET -#define __SYSCFG_CLK_DISABLE __HAL_RCC_SYSCFG_CLK_DISABLE -#define __SYSCFG_CLK_ENABLE __HAL_RCC_SYSCFG_CLK_ENABLE -#define __SYSCFG_CLK_SLEEP_DISABLE __HAL_RCC_SYSCFG_CLK_SLEEP_DISABLE -#define __SYSCFG_CLK_SLEEP_ENABLE __HAL_RCC_SYSCFG_CLK_SLEEP_ENABLE -#define __SYSCFG_FORCE_RESET __HAL_RCC_SYSCFG_FORCE_RESET -#define __SYSCFG_RELEASE_RESET __HAL_RCC_SYSCFG_RELEASE_RESET -#define __TIM1_CLK_DISABLE __HAL_RCC_TIM1_CLK_DISABLE -#define __TIM1_CLK_ENABLE __HAL_RCC_TIM1_CLK_ENABLE -#define __TIM1_CLK_SLEEP_DISABLE __HAL_RCC_TIM1_CLK_SLEEP_DISABLE -#define __TIM1_CLK_SLEEP_ENABLE __HAL_RCC_TIM1_CLK_SLEEP_ENABLE -#define __TIM1_FORCE_RESET __HAL_RCC_TIM1_FORCE_RESET -#define __TIM1_RELEASE_RESET __HAL_RCC_TIM1_RELEASE_RESET -#define __TIM10_CLK_DISABLE __HAL_RCC_TIM10_CLK_DISABLE -#define __TIM10_CLK_ENABLE __HAL_RCC_TIM10_CLK_ENABLE -#define __TIM10_FORCE_RESET __HAL_RCC_TIM10_FORCE_RESET -#define __TIM10_RELEASE_RESET __HAL_RCC_TIM10_RELEASE_RESET -#define __TIM11_CLK_DISABLE __HAL_RCC_TIM11_CLK_DISABLE -#define __TIM11_CLK_ENABLE __HAL_RCC_TIM11_CLK_ENABLE -#define __TIM11_FORCE_RESET __HAL_RCC_TIM11_FORCE_RESET -#define __TIM11_RELEASE_RESET __HAL_RCC_TIM11_RELEASE_RESET -#define __TIM12_CLK_DISABLE __HAL_RCC_TIM12_CLK_DISABLE -#define __TIM12_CLK_ENABLE __HAL_RCC_TIM12_CLK_ENABLE -#define __TIM12_FORCE_RESET __HAL_RCC_TIM12_FORCE_RESET -#define __TIM12_RELEASE_RESET __HAL_RCC_TIM12_RELEASE_RESET -#define __TIM13_CLK_DISABLE __HAL_RCC_TIM13_CLK_DISABLE -#define __TIM13_CLK_ENABLE __HAL_RCC_TIM13_CLK_ENABLE -#define __TIM13_FORCE_RESET __HAL_RCC_TIM13_FORCE_RESET -#define __TIM13_RELEASE_RESET __HAL_RCC_TIM13_RELEASE_RESET -#define __TIM14_CLK_DISABLE __HAL_RCC_TIM14_CLK_DISABLE -#define __TIM14_CLK_ENABLE __HAL_RCC_TIM14_CLK_ENABLE -#define __TIM14_FORCE_RESET __HAL_RCC_TIM14_FORCE_RESET -#define __TIM14_RELEASE_RESET __HAL_RCC_TIM14_RELEASE_RESET -#define __TIM15_CLK_DISABLE __HAL_RCC_TIM15_CLK_DISABLE -#define __TIM15_CLK_ENABLE __HAL_RCC_TIM15_CLK_ENABLE -#define __TIM15_CLK_SLEEP_DISABLE __HAL_RCC_TIM15_CLK_SLEEP_DISABLE -#define __TIM15_CLK_SLEEP_ENABLE __HAL_RCC_TIM15_CLK_SLEEP_ENABLE -#define __TIM15_FORCE_RESET __HAL_RCC_TIM15_FORCE_RESET -#define __TIM15_RELEASE_RESET __HAL_RCC_TIM15_RELEASE_RESET -#define __TIM16_CLK_DISABLE __HAL_RCC_TIM16_CLK_DISABLE -#define __TIM16_CLK_ENABLE __HAL_RCC_TIM16_CLK_ENABLE -#define __TIM16_CLK_SLEEP_DISABLE __HAL_RCC_TIM16_CLK_SLEEP_DISABLE -#define __TIM16_CLK_SLEEP_ENABLE __HAL_RCC_TIM16_CLK_SLEEP_ENABLE -#define __TIM16_FORCE_RESET __HAL_RCC_TIM16_FORCE_RESET -#define __TIM16_RELEASE_RESET __HAL_RCC_TIM16_RELEASE_RESET -#define __TIM17_CLK_DISABLE __HAL_RCC_TIM17_CLK_DISABLE -#define __TIM17_CLK_ENABLE __HAL_RCC_TIM17_CLK_ENABLE -#define __TIM17_CLK_SLEEP_DISABLE __HAL_RCC_TIM17_CLK_SLEEP_DISABLE -#define __TIM17_CLK_SLEEP_ENABLE __HAL_RCC_TIM17_CLK_SLEEP_ENABLE -#define __TIM17_FORCE_RESET __HAL_RCC_TIM17_FORCE_RESET -#define __TIM17_RELEASE_RESET __HAL_RCC_TIM17_RELEASE_RESET -#define __TIM2_CLK_DISABLE __HAL_RCC_TIM2_CLK_DISABLE -#define __TIM2_CLK_ENABLE __HAL_RCC_TIM2_CLK_ENABLE -#define __TIM2_CLK_SLEEP_DISABLE __HAL_RCC_TIM2_CLK_SLEEP_DISABLE -#define __TIM2_CLK_SLEEP_ENABLE __HAL_RCC_TIM2_CLK_SLEEP_ENABLE -#define __TIM2_FORCE_RESET __HAL_RCC_TIM2_FORCE_RESET -#define __TIM2_RELEASE_RESET __HAL_RCC_TIM2_RELEASE_RESET -#define __TIM3_CLK_DISABLE __HAL_RCC_TIM3_CLK_DISABLE -#define __TIM3_CLK_ENABLE __HAL_RCC_TIM3_CLK_ENABLE -#define __TIM3_CLK_SLEEP_DISABLE __HAL_RCC_TIM3_CLK_SLEEP_DISABLE -#define __TIM3_CLK_SLEEP_ENABLE __HAL_RCC_TIM3_CLK_SLEEP_ENABLE -#define __TIM3_FORCE_RESET __HAL_RCC_TIM3_FORCE_RESET -#define __TIM3_RELEASE_RESET __HAL_RCC_TIM3_RELEASE_RESET -#define __TIM4_CLK_DISABLE __HAL_RCC_TIM4_CLK_DISABLE -#define __TIM4_CLK_ENABLE __HAL_RCC_TIM4_CLK_ENABLE -#define __TIM4_CLK_SLEEP_DISABLE __HAL_RCC_TIM4_CLK_SLEEP_DISABLE -#define __TIM4_CLK_SLEEP_ENABLE __HAL_RCC_TIM4_CLK_SLEEP_ENABLE -#define __TIM4_FORCE_RESET __HAL_RCC_TIM4_FORCE_RESET -#define __TIM4_RELEASE_RESET __HAL_RCC_TIM4_RELEASE_RESET -#define __TIM5_CLK_DISABLE __HAL_RCC_TIM5_CLK_DISABLE -#define __TIM5_CLK_ENABLE __HAL_RCC_TIM5_CLK_ENABLE -#define __TIM5_CLK_SLEEP_DISABLE __HAL_RCC_TIM5_CLK_SLEEP_DISABLE -#define __TIM5_CLK_SLEEP_ENABLE __HAL_RCC_TIM5_CLK_SLEEP_ENABLE -#define __TIM5_FORCE_RESET __HAL_RCC_TIM5_FORCE_RESET -#define __TIM5_RELEASE_RESET __HAL_RCC_TIM5_RELEASE_RESET -#define __TIM6_CLK_DISABLE __HAL_RCC_TIM6_CLK_DISABLE -#define __TIM6_CLK_ENABLE __HAL_RCC_TIM6_CLK_ENABLE -#define __TIM6_CLK_SLEEP_DISABLE __HAL_RCC_TIM6_CLK_SLEEP_DISABLE -#define __TIM6_CLK_SLEEP_ENABLE __HAL_RCC_TIM6_CLK_SLEEP_ENABLE -#define __TIM6_FORCE_RESET __HAL_RCC_TIM6_FORCE_RESET -#define __TIM6_RELEASE_RESET __HAL_RCC_TIM6_RELEASE_RESET -#define __TIM7_CLK_DISABLE __HAL_RCC_TIM7_CLK_DISABLE -#define __TIM7_CLK_ENABLE __HAL_RCC_TIM7_CLK_ENABLE -#define __TIM7_CLK_SLEEP_DISABLE __HAL_RCC_TIM7_CLK_SLEEP_DISABLE -#define __TIM7_CLK_SLEEP_ENABLE __HAL_RCC_TIM7_CLK_SLEEP_ENABLE -#define __TIM7_FORCE_RESET __HAL_RCC_TIM7_FORCE_RESET -#define __TIM7_RELEASE_RESET __HAL_RCC_TIM7_RELEASE_RESET -#define __TIM8_CLK_DISABLE __HAL_RCC_TIM8_CLK_DISABLE -#define __TIM8_CLK_ENABLE __HAL_RCC_TIM8_CLK_ENABLE -#define __TIM8_CLK_SLEEP_DISABLE __HAL_RCC_TIM8_CLK_SLEEP_DISABLE -#define __TIM8_CLK_SLEEP_ENABLE __HAL_RCC_TIM8_CLK_SLEEP_ENABLE -#define __TIM8_FORCE_RESET __HAL_RCC_TIM8_FORCE_RESET -#define __TIM8_RELEASE_RESET __HAL_RCC_TIM8_RELEASE_RESET -#define __TIM9_CLK_DISABLE __HAL_RCC_TIM9_CLK_DISABLE -#define __TIM9_CLK_ENABLE __HAL_RCC_TIM9_CLK_ENABLE -#define __TIM9_FORCE_RESET __HAL_RCC_TIM9_FORCE_RESET -#define __TIM9_RELEASE_RESET __HAL_RCC_TIM9_RELEASE_RESET -#define __TSC_CLK_DISABLE __HAL_RCC_TSC_CLK_DISABLE -#define __TSC_CLK_ENABLE __HAL_RCC_TSC_CLK_ENABLE -#define __TSC_CLK_SLEEP_DISABLE __HAL_RCC_TSC_CLK_SLEEP_DISABLE -#define __TSC_CLK_SLEEP_ENABLE __HAL_RCC_TSC_CLK_SLEEP_ENABLE -#define __TSC_FORCE_RESET __HAL_RCC_TSC_FORCE_RESET -#define __TSC_RELEASE_RESET __HAL_RCC_TSC_RELEASE_RESET -#define __UART4_CLK_DISABLE __HAL_RCC_UART4_CLK_DISABLE -#define __UART4_CLK_ENABLE __HAL_RCC_UART4_CLK_ENABLE -#define __UART4_CLK_SLEEP_DISABLE __HAL_RCC_UART4_CLK_SLEEP_DISABLE -#define __UART4_CLK_SLEEP_ENABLE __HAL_RCC_UART4_CLK_SLEEP_ENABLE -#define __UART4_FORCE_RESET __HAL_RCC_UART4_FORCE_RESET -#define __UART4_RELEASE_RESET __HAL_RCC_UART4_RELEASE_RESET -#define __UART5_CLK_DISABLE __HAL_RCC_UART5_CLK_DISABLE -#define __UART5_CLK_ENABLE __HAL_RCC_UART5_CLK_ENABLE -#define __UART5_CLK_SLEEP_DISABLE __HAL_RCC_UART5_CLK_SLEEP_DISABLE -#define __UART5_CLK_SLEEP_ENABLE __HAL_RCC_UART5_CLK_SLEEP_ENABLE -#define __UART5_FORCE_RESET __HAL_RCC_UART5_FORCE_RESET -#define __UART5_RELEASE_RESET __HAL_RCC_UART5_RELEASE_RESET -#define __USART1_CLK_DISABLE __HAL_RCC_USART1_CLK_DISABLE -#define __USART1_CLK_ENABLE __HAL_RCC_USART1_CLK_ENABLE -#define __USART1_CLK_SLEEP_DISABLE __HAL_RCC_USART1_CLK_SLEEP_DISABLE -#define __USART1_CLK_SLEEP_ENABLE __HAL_RCC_USART1_CLK_SLEEP_ENABLE -#define __USART1_FORCE_RESET __HAL_RCC_USART1_FORCE_RESET -#define __USART1_RELEASE_RESET __HAL_RCC_USART1_RELEASE_RESET -#define __USART2_CLK_DISABLE __HAL_RCC_USART2_CLK_DISABLE -#define __USART2_CLK_ENABLE __HAL_RCC_USART2_CLK_ENABLE -#define __USART2_CLK_SLEEP_DISABLE __HAL_RCC_USART2_CLK_SLEEP_DISABLE -#define __USART2_CLK_SLEEP_ENABLE __HAL_RCC_USART2_CLK_SLEEP_ENABLE -#define __USART2_FORCE_RESET __HAL_RCC_USART2_FORCE_RESET -#define __USART2_RELEASE_RESET __HAL_RCC_USART2_RELEASE_RESET -#define __USART3_CLK_DISABLE __HAL_RCC_USART3_CLK_DISABLE -#define __USART3_CLK_ENABLE __HAL_RCC_USART3_CLK_ENABLE -#define __USART3_CLK_SLEEP_DISABLE __HAL_RCC_USART3_CLK_SLEEP_DISABLE -#define __USART3_CLK_SLEEP_ENABLE __HAL_RCC_USART3_CLK_SLEEP_ENABLE -#define __USART3_FORCE_RESET __HAL_RCC_USART3_FORCE_RESET -#define __USART3_RELEASE_RESET __HAL_RCC_USART3_RELEASE_RESET -#define __USART4_CLK_DISABLE __HAL_RCC_UART4_CLK_DISABLE -#define __USART4_CLK_ENABLE __HAL_RCC_UART4_CLK_ENABLE -#define __USART4_CLK_SLEEP_ENABLE __HAL_RCC_UART4_CLK_SLEEP_ENABLE -#define __USART4_CLK_SLEEP_DISABLE __HAL_RCC_UART4_CLK_SLEEP_DISABLE -#define __USART4_FORCE_RESET __HAL_RCC_UART4_FORCE_RESET -#define __USART4_RELEASE_RESET __HAL_RCC_UART4_RELEASE_RESET -#define __USART5_CLK_DISABLE __HAL_RCC_UART5_CLK_DISABLE -#define __USART5_CLK_ENABLE __HAL_RCC_UART5_CLK_ENABLE -#define __USART5_CLK_SLEEP_ENABLE __HAL_RCC_UART5_CLK_SLEEP_ENABLE -#define __USART5_CLK_SLEEP_DISABLE __HAL_RCC_UART5_CLK_SLEEP_DISABLE -#define __USART5_FORCE_RESET __HAL_RCC_UART5_FORCE_RESET -#define __USART5_RELEASE_RESET __HAL_RCC_UART5_RELEASE_RESET -#define __USART7_CLK_DISABLE __HAL_RCC_UART7_CLK_DISABLE -#define __USART7_CLK_ENABLE __HAL_RCC_UART7_CLK_ENABLE -#define __USART7_FORCE_RESET __HAL_RCC_UART7_FORCE_RESET -#define __USART7_RELEASE_RESET __HAL_RCC_UART7_RELEASE_RESET -#define __USART8_CLK_DISABLE __HAL_RCC_UART8_CLK_DISABLE -#define __USART8_CLK_ENABLE __HAL_RCC_UART8_CLK_ENABLE -#define __USART8_FORCE_RESET __HAL_RCC_UART8_FORCE_RESET -#define __USART8_RELEASE_RESET __HAL_RCC_UART8_RELEASE_RESET -#define __USB_CLK_DISABLE __HAL_RCC_USB_CLK_DISABLE -#define __USB_CLK_ENABLE __HAL_RCC_USB_CLK_ENABLE -#define __USB_FORCE_RESET __HAL_RCC_USB_FORCE_RESET -#define __USB_CLK_SLEEP_ENABLE __HAL_RCC_USB_CLK_SLEEP_ENABLE -#define __USB_CLK_SLEEP_DISABLE __HAL_RCC_USB_CLK_SLEEP_DISABLE -#define __USB_OTG_FS_CLK_DISABLE __HAL_RCC_USB_OTG_FS_CLK_DISABLE -#define __USB_OTG_FS_CLK_ENABLE __HAL_RCC_USB_OTG_FS_CLK_ENABLE -#define __USB_RELEASE_RESET __HAL_RCC_USB_RELEASE_RESET -#define __WWDG_CLK_DISABLE __HAL_RCC_WWDG_CLK_DISABLE -#define __WWDG_CLK_ENABLE __HAL_RCC_WWDG_CLK_ENABLE -#define __WWDG_CLK_SLEEP_DISABLE __HAL_RCC_WWDG_CLK_SLEEP_DISABLE -#define __WWDG_CLK_SLEEP_ENABLE __HAL_RCC_WWDG_CLK_SLEEP_ENABLE -#define __WWDG_FORCE_RESET __HAL_RCC_WWDG_FORCE_RESET -#define __WWDG_RELEASE_RESET __HAL_RCC_WWDG_RELEASE_RESET -#define __TIM21_CLK_ENABLE __HAL_RCC_TIM21_CLK_ENABLE -#define __TIM21_CLK_DISABLE __HAL_RCC_TIM21_CLK_DISABLE -#define __TIM21_FORCE_RESET __HAL_RCC_TIM21_FORCE_RESET -#define __TIM21_RELEASE_RESET __HAL_RCC_TIM21_RELEASE_RESET -#define __TIM21_CLK_SLEEP_ENABLE __HAL_RCC_TIM21_CLK_SLEEP_ENABLE -#define __TIM21_CLK_SLEEP_DISABLE __HAL_RCC_TIM21_CLK_SLEEP_DISABLE -#define __TIM22_CLK_ENABLE __HAL_RCC_TIM22_CLK_ENABLE -#define __TIM22_CLK_DISABLE __HAL_RCC_TIM22_CLK_DISABLE -#define __TIM22_FORCE_RESET __HAL_RCC_TIM22_FORCE_RESET -#define __TIM22_RELEASE_RESET __HAL_RCC_TIM22_RELEASE_RESET -#define __TIM22_CLK_SLEEP_ENABLE __HAL_RCC_TIM22_CLK_SLEEP_ENABLE -#define __TIM22_CLK_SLEEP_DISABLE __HAL_RCC_TIM22_CLK_SLEEP_DISABLE -#define __CRS_CLK_DISABLE __HAL_RCC_CRS_CLK_DISABLE -#define __CRS_CLK_ENABLE __HAL_RCC_CRS_CLK_ENABLE -#define __CRS_CLK_SLEEP_DISABLE __HAL_RCC_CRS_CLK_SLEEP_DISABLE -#define __CRS_CLK_SLEEP_ENABLE __HAL_RCC_CRS_CLK_SLEEP_ENABLE -#define __CRS_FORCE_RESET __HAL_RCC_CRS_FORCE_RESET -#define __CRS_RELEASE_RESET __HAL_RCC_CRS_RELEASE_RESET -#define __RCC_BACKUPRESET_FORCE __HAL_RCC_BACKUPRESET_FORCE -#define __RCC_BACKUPRESET_RELEASE __HAL_RCC_BACKUPRESET_RELEASE - -#define __USB_OTG_FS_FORCE_RESET __HAL_RCC_USB_OTG_FS_FORCE_RESET -#define __USB_OTG_FS_RELEASE_RESET __HAL_RCC_USB_OTG_FS_RELEASE_RESET -#define __USB_OTG_FS_CLK_SLEEP_ENABLE __HAL_RCC_USB_OTG_FS_CLK_SLEEP_ENABLE -#define __USB_OTG_FS_CLK_SLEEP_DISABLE __HAL_RCC_USB_OTG_FS_CLK_SLEEP_DISABLE -#define __USB_OTG_HS_CLK_DISABLE __HAL_RCC_USB_OTG_HS_CLK_DISABLE -#define __USB_OTG_HS_CLK_ENABLE __HAL_RCC_USB_OTG_HS_CLK_ENABLE -#define __USB_OTG_HS_ULPI_CLK_ENABLE __HAL_RCC_USB_OTG_HS_ULPI_CLK_ENABLE -#define __USB_OTG_HS_ULPI_CLK_DISABLE __HAL_RCC_USB_OTG_HS_ULPI_CLK_DISABLE -#define __TIM9_CLK_SLEEP_ENABLE __HAL_RCC_TIM9_CLK_SLEEP_ENABLE -#define __TIM9_CLK_SLEEP_DISABLE __HAL_RCC_TIM9_CLK_SLEEP_DISABLE -#define __TIM10_CLK_SLEEP_ENABLE __HAL_RCC_TIM10_CLK_SLEEP_ENABLE -#define __TIM10_CLK_SLEEP_DISABLE __HAL_RCC_TIM10_CLK_SLEEP_DISABLE -#define __TIM11_CLK_SLEEP_ENABLE __HAL_RCC_TIM11_CLK_SLEEP_ENABLE -#define __TIM11_CLK_SLEEP_DISABLE __HAL_RCC_TIM11_CLK_SLEEP_DISABLE -#define __ETHMACPTP_CLK_SLEEP_ENABLE __HAL_RCC_ETHMACPTP_CLK_SLEEP_ENABLE -#define __ETHMACPTP_CLK_SLEEP_DISABLE __HAL_RCC_ETHMACPTP_CLK_SLEEP_DISABLE -#define __ETHMACPTP_CLK_ENABLE __HAL_RCC_ETHMACPTP_CLK_ENABLE -#define __ETHMACPTP_CLK_DISABLE __HAL_RCC_ETHMACPTP_CLK_DISABLE -#define __HASH_CLK_ENABLE __HAL_RCC_HASH_CLK_ENABLE -#define __HASH_FORCE_RESET __HAL_RCC_HASH_FORCE_RESET -#define __HASH_RELEASE_RESET __HAL_RCC_HASH_RELEASE_RESET -#define __HASH_CLK_SLEEP_ENABLE __HAL_RCC_HASH_CLK_SLEEP_ENABLE -#define __HASH_CLK_SLEEP_DISABLE __HAL_RCC_HASH_CLK_SLEEP_DISABLE -#define __HASH_CLK_DISABLE __HAL_RCC_HASH_CLK_DISABLE -#define __SPI5_CLK_ENABLE __HAL_RCC_SPI5_CLK_ENABLE -#define __SPI5_CLK_DISABLE __HAL_RCC_SPI5_CLK_DISABLE -#define __SPI5_FORCE_RESET __HAL_RCC_SPI5_FORCE_RESET -#define __SPI5_RELEASE_RESET __HAL_RCC_SPI5_RELEASE_RESET -#define __SPI5_CLK_SLEEP_ENABLE __HAL_RCC_SPI5_CLK_SLEEP_ENABLE -#define __SPI5_CLK_SLEEP_DISABLE __HAL_RCC_SPI5_CLK_SLEEP_DISABLE -#define __SPI6_CLK_ENABLE __HAL_RCC_SPI6_CLK_ENABLE -#define __SPI6_CLK_DISABLE __HAL_RCC_SPI6_CLK_DISABLE -#define __SPI6_FORCE_RESET __HAL_RCC_SPI6_FORCE_RESET -#define __SPI6_RELEASE_RESET __HAL_RCC_SPI6_RELEASE_RESET -#define __SPI6_CLK_SLEEP_ENABLE __HAL_RCC_SPI6_CLK_SLEEP_ENABLE -#define __SPI6_CLK_SLEEP_DISABLE __HAL_RCC_SPI6_CLK_SLEEP_DISABLE -#define __LTDC_CLK_ENABLE __HAL_RCC_LTDC_CLK_ENABLE -#define __LTDC_CLK_DISABLE __HAL_RCC_LTDC_CLK_DISABLE -#define __LTDC_FORCE_RESET __HAL_RCC_LTDC_FORCE_RESET -#define __LTDC_RELEASE_RESET __HAL_RCC_LTDC_RELEASE_RESET -#define __LTDC_CLK_SLEEP_ENABLE __HAL_RCC_LTDC_CLK_SLEEP_ENABLE -#define __ETHMAC_CLK_SLEEP_ENABLE __HAL_RCC_ETHMAC_CLK_SLEEP_ENABLE -#define __ETHMAC_CLK_SLEEP_DISABLE __HAL_RCC_ETHMAC_CLK_SLEEP_DISABLE -#define __ETHMACTX_CLK_SLEEP_ENABLE __HAL_RCC_ETHMACTX_CLK_SLEEP_ENABLE -#define __ETHMACTX_CLK_SLEEP_DISABLE __HAL_RCC_ETHMACTX_CLK_SLEEP_DISABLE -#define __ETHMACRX_CLK_SLEEP_ENABLE __HAL_RCC_ETHMACRX_CLK_SLEEP_ENABLE -#define __ETHMACRX_CLK_SLEEP_DISABLE __HAL_RCC_ETHMACRX_CLK_SLEEP_DISABLE -#define __TIM12_CLK_SLEEP_ENABLE __HAL_RCC_TIM12_CLK_SLEEP_ENABLE -#define __TIM12_CLK_SLEEP_DISABLE __HAL_RCC_TIM12_CLK_SLEEP_DISABLE -#define __TIM13_CLK_SLEEP_ENABLE __HAL_RCC_TIM13_CLK_SLEEP_ENABLE -#define __TIM13_CLK_SLEEP_DISABLE __HAL_RCC_TIM13_CLK_SLEEP_DISABLE -#define __TIM14_CLK_SLEEP_ENABLE __HAL_RCC_TIM14_CLK_SLEEP_ENABLE -#define __TIM14_CLK_SLEEP_DISABLE __HAL_RCC_TIM14_CLK_SLEEP_DISABLE -#define __BKPSRAM_CLK_ENABLE __HAL_RCC_BKPSRAM_CLK_ENABLE -#define __BKPSRAM_CLK_DISABLE __HAL_RCC_BKPSRAM_CLK_DISABLE -#define __BKPSRAM_CLK_SLEEP_ENABLE __HAL_RCC_BKPSRAM_CLK_SLEEP_ENABLE -#define __BKPSRAM_CLK_SLEEP_DISABLE __HAL_RCC_BKPSRAM_CLK_SLEEP_DISABLE -#define __CCMDATARAMEN_CLK_ENABLE __HAL_RCC_CCMDATARAMEN_CLK_ENABLE -#define __CCMDATARAMEN_CLK_DISABLE __HAL_RCC_CCMDATARAMEN_CLK_DISABLE -#define __USART6_CLK_ENABLE __HAL_RCC_USART6_CLK_ENABLE -#define __USART6_CLK_DISABLE __HAL_RCC_USART6_CLK_DISABLE -#define __USART6_FORCE_RESET __HAL_RCC_USART6_FORCE_RESET -#define __USART6_RELEASE_RESET __HAL_RCC_USART6_RELEASE_RESET -#define __USART6_CLK_SLEEP_ENABLE __HAL_RCC_USART6_CLK_SLEEP_ENABLE -#define __USART6_CLK_SLEEP_DISABLE __HAL_RCC_USART6_CLK_SLEEP_DISABLE -#define __SPI4_CLK_ENABLE __HAL_RCC_SPI4_CLK_ENABLE -#define __SPI4_CLK_DISABLE __HAL_RCC_SPI4_CLK_DISABLE -#define __SPI4_FORCE_RESET __HAL_RCC_SPI4_FORCE_RESET -#define __SPI4_RELEASE_RESET __HAL_RCC_SPI4_RELEASE_RESET -#define __SPI4_CLK_SLEEP_ENABLE __HAL_RCC_SPI4_CLK_SLEEP_ENABLE -#define __SPI4_CLK_SLEEP_DISABLE __HAL_RCC_SPI4_CLK_SLEEP_DISABLE -#define __GPIOI_CLK_ENABLE __HAL_RCC_GPIOI_CLK_ENABLE -#define __GPIOI_CLK_DISABLE __HAL_RCC_GPIOI_CLK_DISABLE -#define __GPIOI_FORCE_RESET __HAL_RCC_GPIOI_FORCE_RESET -#define __GPIOI_RELEASE_RESET __HAL_RCC_GPIOI_RELEASE_RESET -#define __GPIOI_CLK_SLEEP_ENABLE __HAL_RCC_GPIOI_CLK_SLEEP_ENABLE -#define __GPIOI_CLK_SLEEP_DISABLE __HAL_RCC_GPIOI_CLK_SLEEP_DISABLE -#define __GPIOJ_CLK_ENABLE __HAL_RCC_GPIOJ_CLK_ENABLE -#define __GPIOJ_CLK_DISABLE __HAL_RCC_GPIOJ_CLK_DISABLE -#define __GPIOJ_FORCE_RESET __HAL_RCC_GPIOJ_FORCE_RESET -#define __GPIOJ_RELEASE_RESET __HAL_RCC_GPIOJ_RELEASE_RESET -#define __GPIOJ_CLK_SLEEP_ENABLE __HAL_RCC_GPIOJ_CLK_SLEEP_ENABLE -#define __GPIOJ_CLK_SLEEP_DISABLE __HAL_RCC_GPIOJ_CLK_SLEEP_DISABLE -#define __GPIOK_CLK_ENABLE __HAL_RCC_GPIOK_CLK_ENABLE -#define __GPIOK_CLK_DISABLE __HAL_RCC_GPIOK_CLK_DISABLE -#define __GPIOK_RELEASE_RESET __HAL_RCC_GPIOK_RELEASE_RESET -#define __GPIOK_CLK_SLEEP_ENABLE __HAL_RCC_GPIOK_CLK_SLEEP_ENABLE -#define __GPIOK_CLK_SLEEP_DISABLE __HAL_RCC_GPIOK_CLK_SLEEP_DISABLE -#define __ETH_CLK_ENABLE __HAL_RCC_ETH_CLK_ENABLE -#define __ETH_CLK_DISABLE __HAL_RCC_ETH_CLK_DISABLE -#define __DCMI_CLK_ENABLE __HAL_RCC_DCMI_CLK_ENABLE -#define __DCMI_CLK_DISABLE __HAL_RCC_DCMI_CLK_DISABLE -#define __DCMI_FORCE_RESET __HAL_RCC_DCMI_FORCE_RESET -#define __DCMI_RELEASE_RESET __HAL_RCC_DCMI_RELEASE_RESET -#define __DCMI_CLK_SLEEP_ENABLE __HAL_RCC_DCMI_CLK_SLEEP_ENABLE -#define __DCMI_CLK_SLEEP_DISABLE __HAL_RCC_DCMI_CLK_SLEEP_DISABLE -#define __UART7_CLK_ENABLE __HAL_RCC_UART7_CLK_ENABLE -#define __UART7_CLK_DISABLE __HAL_RCC_UART7_CLK_DISABLE -#define __UART7_RELEASE_RESET __HAL_RCC_UART7_RELEASE_RESET -#define __UART7_FORCE_RESET __HAL_RCC_UART7_FORCE_RESET -#define __UART7_CLK_SLEEP_ENABLE __HAL_RCC_UART7_CLK_SLEEP_ENABLE -#define __UART7_CLK_SLEEP_DISABLE __HAL_RCC_UART7_CLK_SLEEP_DISABLE -#define __UART8_CLK_ENABLE __HAL_RCC_UART8_CLK_ENABLE -#define __UART8_CLK_DISABLE __HAL_RCC_UART8_CLK_DISABLE -#define __UART8_FORCE_RESET __HAL_RCC_UART8_FORCE_RESET -#define __UART8_RELEASE_RESET __HAL_RCC_UART8_RELEASE_RESET -#define __UART8_CLK_SLEEP_ENABLE __HAL_RCC_UART8_CLK_SLEEP_ENABLE -#define __UART8_CLK_SLEEP_DISABLE __HAL_RCC_UART8_CLK_SLEEP_DISABLE -#define __OTGHS_CLK_SLEEP_ENABLE __HAL_RCC_USB_OTG_HS_CLK_SLEEP_ENABLE -#define __OTGHS_CLK_SLEEP_DISABLE __HAL_RCC_USB_OTG_HS_CLK_SLEEP_DISABLE -#define __OTGHS_FORCE_RESET __HAL_RCC_USB_OTG_HS_FORCE_RESET -#define __OTGHS_RELEASE_RESET __HAL_RCC_USB_OTG_HS_RELEASE_RESET -#define __OTGHSULPI_CLK_SLEEP_ENABLE __HAL_RCC_USB_OTG_HS_ULPI_CLK_SLEEP_ENABLE -#define __OTGHSULPI_CLK_SLEEP_DISABLE __HAL_RCC_USB_OTG_HS_ULPI_CLK_SLEEP_DISABLE -#define __HAL_RCC_OTGHS_CLK_SLEEP_ENABLE __HAL_RCC_USB_OTG_HS_CLK_SLEEP_ENABLE -#define __HAL_RCC_OTGHS_CLK_SLEEP_DISABLE __HAL_RCC_USB_OTG_HS_CLK_SLEEP_DISABLE -#define __HAL_RCC_OTGHS_IS_CLK_SLEEP_ENABLED __HAL_RCC_USB_OTG_HS_IS_CLK_SLEEP_ENABLED -#define __HAL_RCC_OTGHS_IS_CLK_SLEEP_DISABLED __HAL_RCC_USB_OTG_HS_IS_CLK_SLEEP_DISABLED -#define __HAL_RCC_OTGHS_FORCE_RESET __HAL_RCC_USB_OTG_HS_FORCE_RESET -#define __HAL_RCC_OTGHS_RELEASE_RESET __HAL_RCC_USB_OTG_HS_RELEASE_RESET -#define __HAL_RCC_OTGHSULPI_CLK_SLEEP_ENABLE __HAL_RCC_USB_OTG_HS_ULPI_CLK_SLEEP_ENABLE -#define __HAL_RCC_OTGHSULPI_CLK_SLEEP_DISABLE __HAL_RCC_USB_OTG_HS_ULPI_CLK_SLEEP_DISABLE -#define __HAL_RCC_OTGHSULPI_IS_CLK_SLEEP_ENABLED __HAL_RCC_USB_OTG_HS_ULPI_IS_CLK_SLEEP_ENABLED -#define __HAL_RCC_OTGHSULPI_IS_CLK_SLEEP_DISABLED __HAL_RCC_USB_OTG_HS_ULPI_IS_CLK_SLEEP_DISABLED -#define __SRAM3_CLK_SLEEP_ENABLE __HAL_RCC_SRAM3_CLK_SLEEP_ENABLE -#define __CAN2_CLK_SLEEP_ENABLE __HAL_RCC_CAN2_CLK_SLEEP_ENABLE -#define __CAN2_CLK_SLEEP_DISABLE __HAL_RCC_CAN2_CLK_SLEEP_DISABLE -#define __DAC_CLK_SLEEP_ENABLE __HAL_RCC_DAC_CLK_SLEEP_ENABLE -#define __DAC_CLK_SLEEP_DISABLE __HAL_RCC_DAC_CLK_SLEEP_DISABLE -#define __ADC2_CLK_SLEEP_ENABLE __HAL_RCC_ADC2_CLK_SLEEP_ENABLE -#define __ADC2_CLK_SLEEP_DISABLE __HAL_RCC_ADC2_CLK_SLEEP_DISABLE -#define __ADC3_CLK_SLEEP_ENABLE __HAL_RCC_ADC3_CLK_SLEEP_ENABLE -#define __ADC3_CLK_SLEEP_DISABLE __HAL_RCC_ADC3_CLK_SLEEP_DISABLE -#define __FSMC_FORCE_RESET __HAL_RCC_FSMC_FORCE_RESET -#define __FSMC_RELEASE_RESET __HAL_RCC_FSMC_RELEASE_RESET -#define __FSMC_CLK_SLEEP_ENABLE __HAL_RCC_FSMC_CLK_SLEEP_ENABLE -#define __FSMC_CLK_SLEEP_DISABLE __HAL_RCC_FSMC_CLK_SLEEP_DISABLE -#define __SDIO_FORCE_RESET __HAL_RCC_SDIO_FORCE_RESET -#define __SDIO_RELEASE_RESET __HAL_RCC_SDIO_RELEASE_RESET -#define __SDIO_CLK_SLEEP_DISABLE __HAL_RCC_SDIO_CLK_SLEEP_DISABLE -#define __SDIO_CLK_SLEEP_ENABLE __HAL_RCC_SDIO_CLK_SLEEP_ENABLE -#define __DMA2D_CLK_ENABLE __HAL_RCC_DMA2D_CLK_ENABLE -#define __DMA2D_CLK_DISABLE __HAL_RCC_DMA2D_CLK_DISABLE -#define __DMA2D_FORCE_RESET __HAL_RCC_DMA2D_FORCE_RESET -#define __DMA2D_RELEASE_RESET __HAL_RCC_DMA2D_RELEASE_RESET -#define __DMA2D_CLK_SLEEP_ENABLE __HAL_RCC_DMA2D_CLK_SLEEP_ENABLE -#define __DMA2D_CLK_SLEEP_DISABLE __HAL_RCC_DMA2D_CLK_SLEEP_DISABLE - -/* alias define maintained for legacy */ -#define __HAL_RCC_OTGFS_FORCE_RESET __HAL_RCC_USB_OTG_FS_FORCE_RESET -#define __HAL_RCC_OTGFS_RELEASE_RESET __HAL_RCC_USB_OTG_FS_RELEASE_RESET - -#define __ADC12_CLK_ENABLE __HAL_RCC_ADC12_CLK_ENABLE -#define __ADC12_CLK_DISABLE __HAL_RCC_ADC12_CLK_DISABLE -#define __ADC34_CLK_ENABLE __HAL_RCC_ADC34_CLK_ENABLE -#define __ADC34_CLK_DISABLE __HAL_RCC_ADC34_CLK_DISABLE -#define __DAC2_CLK_ENABLE __HAL_RCC_DAC2_CLK_ENABLE -#define __DAC2_CLK_DISABLE __HAL_RCC_DAC2_CLK_DISABLE -#define __TIM18_CLK_ENABLE __HAL_RCC_TIM18_CLK_ENABLE -#define __TIM18_CLK_DISABLE __HAL_RCC_TIM18_CLK_DISABLE -#define __TIM19_CLK_ENABLE __HAL_RCC_TIM19_CLK_ENABLE -#define __TIM19_CLK_DISABLE __HAL_RCC_TIM19_CLK_DISABLE -#define __TIM20_CLK_ENABLE __HAL_RCC_TIM20_CLK_ENABLE -#define __TIM20_CLK_DISABLE __HAL_RCC_TIM20_CLK_DISABLE -#define __HRTIM1_CLK_ENABLE __HAL_RCC_HRTIM1_CLK_ENABLE -#define __HRTIM1_CLK_DISABLE __HAL_RCC_HRTIM1_CLK_DISABLE -#define __SDADC1_CLK_ENABLE __HAL_RCC_SDADC1_CLK_ENABLE -#define __SDADC2_CLK_ENABLE __HAL_RCC_SDADC2_CLK_ENABLE -#define __SDADC3_CLK_ENABLE __HAL_RCC_SDADC3_CLK_ENABLE -#define __SDADC1_CLK_DISABLE __HAL_RCC_SDADC1_CLK_DISABLE -#define __SDADC2_CLK_DISABLE __HAL_RCC_SDADC2_CLK_DISABLE -#define __SDADC3_CLK_DISABLE __HAL_RCC_SDADC3_CLK_DISABLE - -#define __ADC12_FORCE_RESET __HAL_RCC_ADC12_FORCE_RESET -#define __ADC12_RELEASE_RESET __HAL_RCC_ADC12_RELEASE_RESET -#define __ADC34_FORCE_RESET __HAL_RCC_ADC34_FORCE_RESET -#define __ADC34_RELEASE_RESET __HAL_RCC_ADC34_RELEASE_RESET -#define __DAC2_FORCE_RESET __HAL_RCC_DAC2_FORCE_RESET -#define __DAC2_RELEASE_RESET __HAL_RCC_DAC2_RELEASE_RESET -#define __TIM18_FORCE_RESET __HAL_RCC_TIM18_FORCE_RESET -#define __TIM18_RELEASE_RESET __HAL_RCC_TIM18_RELEASE_RESET -#define __TIM19_FORCE_RESET __HAL_RCC_TIM19_FORCE_RESET -#define __TIM19_RELEASE_RESET __HAL_RCC_TIM19_RELEASE_RESET -#define __TIM20_FORCE_RESET __HAL_RCC_TIM20_FORCE_RESET -#define __TIM20_RELEASE_RESET __HAL_RCC_TIM20_RELEASE_RESET -#define __HRTIM1_FORCE_RESET __HAL_RCC_HRTIM1_FORCE_RESET -#define __HRTIM1_RELEASE_RESET __HAL_RCC_HRTIM1_RELEASE_RESET -#define __SDADC1_FORCE_RESET __HAL_RCC_SDADC1_FORCE_RESET -#define __SDADC2_FORCE_RESET __HAL_RCC_SDADC2_FORCE_RESET -#define __SDADC3_FORCE_RESET __HAL_RCC_SDADC3_FORCE_RESET -#define __SDADC1_RELEASE_RESET __HAL_RCC_SDADC1_RELEASE_RESET -#define __SDADC2_RELEASE_RESET __HAL_RCC_SDADC2_RELEASE_RESET -#define __SDADC3_RELEASE_RESET __HAL_RCC_SDADC3_RELEASE_RESET - -#define __ADC1_IS_CLK_ENABLED __HAL_RCC_ADC1_IS_CLK_ENABLED -#define __ADC1_IS_CLK_DISABLED __HAL_RCC_ADC1_IS_CLK_DISABLED -#define __ADC12_IS_CLK_ENABLED __HAL_RCC_ADC12_IS_CLK_ENABLED -#define __ADC12_IS_CLK_DISABLED __HAL_RCC_ADC12_IS_CLK_DISABLED -#define __ADC34_IS_CLK_ENABLED __HAL_RCC_ADC34_IS_CLK_ENABLED -#define __ADC34_IS_CLK_DISABLED __HAL_RCC_ADC34_IS_CLK_DISABLED -#define __CEC_IS_CLK_ENABLED __HAL_RCC_CEC_IS_CLK_ENABLED -#define __CEC_IS_CLK_DISABLED __HAL_RCC_CEC_IS_CLK_DISABLED -#define __CRC_IS_CLK_ENABLED __HAL_RCC_CRC_IS_CLK_ENABLED -#define __CRC_IS_CLK_DISABLED __HAL_RCC_CRC_IS_CLK_DISABLED -#define __DAC1_IS_CLK_ENABLED __HAL_RCC_DAC1_IS_CLK_ENABLED -#define __DAC1_IS_CLK_DISABLED __HAL_RCC_DAC1_IS_CLK_DISABLED -#define __DAC2_IS_CLK_ENABLED __HAL_RCC_DAC2_IS_CLK_ENABLED -#define __DAC2_IS_CLK_DISABLED __HAL_RCC_DAC2_IS_CLK_DISABLED -#define __DMA1_IS_CLK_ENABLED __HAL_RCC_DMA1_IS_CLK_ENABLED -#define __DMA1_IS_CLK_DISABLED __HAL_RCC_DMA1_IS_CLK_DISABLED -#define __DMA2_IS_CLK_ENABLED __HAL_RCC_DMA2_IS_CLK_ENABLED -#define __DMA2_IS_CLK_DISABLED __HAL_RCC_DMA2_IS_CLK_DISABLED -#define __FLITF_IS_CLK_ENABLED __HAL_RCC_FLITF_IS_CLK_ENABLED -#define __FLITF_IS_CLK_DISABLED __HAL_RCC_FLITF_IS_CLK_DISABLED -#define __FMC_IS_CLK_ENABLED __HAL_RCC_FMC_IS_CLK_ENABLED -#define __FMC_IS_CLK_DISABLED __HAL_RCC_FMC_IS_CLK_DISABLED -#define __GPIOA_IS_CLK_ENABLED __HAL_RCC_GPIOA_IS_CLK_ENABLED -#define __GPIOA_IS_CLK_DISABLED __HAL_RCC_GPIOA_IS_CLK_DISABLED -#define __GPIOB_IS_CLK_ENABLED __HAL_RCC_GPIOB_IS_CLK_ENABLED -#define __GPIOB_IS_CLK_DISABLED __HAL_RCC_GPIOB_IS_CLK_DISABLED -#define __GPIOC_IS_CLK_ENABLED __HAL_RCC_GPIOC_IS_CLK_ENABLED -#define __GPIOC_IS_CLK_DISABLED __HAL_RCC_GPIOC_IS_CLK_DISABLED -#define __GPIOD_IS_CLK_ENABLED __HAL_RCC_GPIOD_IS_CLK_ENABLED -#define __GPIOD_IS_CLK_DISABLED __HAL_RCC_GPIOD_IS_CLK_DISABLED -#define __GPIOE_IS_CLK_ENABLED __HAL_RCC_GPIOE_IS_CLK_ENABLED -#define __GPIOE_IS_CLK_DISABLED __HAL_RCC_GPIOE_IS_CLK_DISABLED -#define __GPIOF_IS_CLK_ENABLED __HAL_RCC_GPIOF_IS_CLK_ENABLED -#define __GPIOF_IS_CLK_DISABLED __HAL_RCC_GPIOF_IS_CLK_DISABLED -#define __GPIOG_IS_CLK_ENABLED __HAL_RCC_GPIOG_IS_CLK_ENABLED -#define __GPIOG_IS_CLK_DISABLED __HAL_RCC_GPIOG_IS_CLK_DISABLED -#define __GPIOH_IS_CLK_ENABLED __HAL_RCC_GPIOH_IS_CLK_ENABLED -#define __GPIOH_IS_CLK_DISABLED __HAL_RCC_GPIOH_IS_CLK_DISABLED -#define __HRTIM1_IS_CLK_ENABLED __HAL_RCC_HRTIM1_IS_CLK_ENABLED -#define __HRTIM1_IS_CLK_DISABLED __HAL_RCC_HRTIM1_IS_CLK_DISABLED -#define __I2C1_IS_CLK_ENABLED __HAL_RCC_I2C1_IS_CLK_ENABLED -#define __I2C1_IS_CLK_DISABLED __HAL_RCC_I2C1_IS_CLK_DISABLED -#define __I2C2_IS_CLK_ENABLED __HAL_RCC_I2C2_IS_CLK_ENABLED -#define __I2C2_IS_CLK_DISABLED __HAL_RCC_I2C2_IS_CLK_DISABLED -#define __I2C3_IS_CLK_ENABLED __HAL_RCC_I2C3_IS_CLK_ENABLED -#define __I2C3_IS_CLK_DISABLED __HAL_RCC_I2C3_IS_CLK_DISABLED -#define __PWR_IS_CLK_ENABLED __HAL_RCC_PWR_IS_CLK_ENABLED -#define __PWR_IS_CLK_DISABLED __HAL_RCC_PWR_IS_CLK_DISABLED -#define __SYSCFG_IS_CLK_ENABLED __HAL_RCC_SYSCFG_IS_CLK_ENABLED -#define __SYSCFG_IS_CLK_DISABLED __HAL_RCC_SYSCFG_IS_CLK_DISABLED -#define __SPI1_IS_CLK_ENABLED __HAL_RCC_SPI1_IS_CLK_ENABLED -#define __SPI1_IS_CLK_DISABLED __HAL_RCC_SPI1_IS_CLK_DISABLED -#define __SPI2_IS_CLK_ENABLED __HAL_RCC_SPI2_IS_CLK_ENABLED -#define __SPI2_IS_CLK_DISABLED __HAL_RCC_SPI2_IS_CLK_DISABLED -#define __SPI3_IS_CLK_ENABLED __HAL_RCC_SPI3_IS_CLK_ENABLED -#define __SPI3_IS_CLK_DISABLED __HAL_RCC_SPI3_IS_CLK_DISABLED -#define __SPI4_IS_CLK_ENABLED __HAL_RCC_SPI4_IS_CLK_ENABLED -#define __SPI4_IS_CLK_DISABLED __HAL_RCC_SPI4_IS_CLK_DISABLED -#define __SDADC1_IS_CLK_ENABLED __HAL_RCC_SDADC1_IS_CLK_ENABLED -#define __SDADC1_IS_CLK_DISABLED __HAL_RCC_SDADC1_IS_CLK_DISABLED -#define __SDADC2_IS_CLK_ENABLED __HAL_RCC_SDADC2_IS_CLK_ENABLED -#define __SDADC2_IS_CLK_DISABLED __HAL_RCC_SDADC2_IS_CLK_DISABLED -#define __SDADC3_IS_CLK_ENABLED __HAL_RCC_SDADC3_IS_CLK_ENABLED -#define __SDADC3_IS_CLK_DISABLED __HAL_RCC_SDADC3_IS_CLK_DISABLED -#define __SRAM_IS_CLK_ENABLED __HAL_RCC_SRAM_IS_CLK_ENABLED -#define __SRAM_IS_CLK_DISABLED __HAL_RCC_SRAM_IS_CLK_DISABLED -#define __TIM1_IS_CLK_ENABLED __HAL_RCC_TIM1_IS_CLK_ENABLED -#define __TIM1_IS_CLK_DISABLED __HAL_RCC_TIM1_IS_CLK_DISABLED -#define __TIM2_IS_CLK_ENABLED __HAL_RCC_TIM2_IS_CLK_ENABLED -#define __TIM2_IS_CLK_DISABLED __HAL_RCC_TIM2_IS_CLK_DISABLED -#define __TIM3_IS_CLK_ENABLED __HAL_RCC_TIM3_IS_CLK_ENABLED -#define __TIM3_IS_CLK_DISABLED __HAL_RCC_TIM3_IS_CLK_DISABLED -#define __TIM4_IS_CLK_ENABLED __HAL_RCC_TIM4_IS_CLK_ENABLED -#define __TIM4_IS_CLK_DISABLED __HAL_RCC_TIM4_IS_CLK_DISABLED -#define __TIM5_IS_CLK_ENABLED __HAL_RCC_TIM5_IS_CLK_ENABLED -#define __TIM5_IS_CLK_DISABLED __HAL_RCC_TIM5_IS_CLK_DISABLED -#define __TIM6_IS_CLK_ENABLED __HAL_RCC_TIM6_IS_CLK_ENABLED -#define __TIM6_IS_CLK_DISABLED __HAL_RCC_TIM6_IS_CLK_DISABLED -#define __TIM7_IS_CLK_ENABLED __HAL_RCC_TIM7_IS_CLK_ENABLED -#define __TIM7_IS_CLK_DISABLED __HAL_RCC_TIM7_IS_CLK_DISABLED -#define __TIM8_IS_CLK_ENABLED __HAL_RCC_TIM8_IS_CLK_ENABLED -#define __TIM8_IS_CLK_DISABLED __HAL_RCC_TIM8_IS_CLK_DISABLED -#define __TIM12_IS_CLK_ENABLED __HAL_RCC_TIM12_IS_CLK_ENABLED -#define __TIM12_IS_CLK_DISABLED __HAL_RCC_TIM12_IS_CLK_DISABLED -#define __TIM13_IS_CLK_ENABLED __HAL_RCC_TIM13_IS_CLK_ENABLED -#define __TIM13_IS_CLK_DISABLED __HAL_RCC_TIM13_IS_CLK_DISABLED -#define __TIM14_IS_CLK_ENABLED __HAL_RCC_TIM14_IS_CLK_ENABLED -#define __TIM14_IS_CLK_DISABLED __HAL_RCC_TIM14_IS_CLK_DISABLED -#define __TIM15_IS_CLK_ENABLED __HAL_RCC_TIM15_IS_CLK_ENABLED -#define __TIM15_IS_CLK_DISABLED __HAL_RCC_TIM15_IS_CLK_DISABLED -#define __TIM16_IS_CLK_ENABLED __HAL_RCC_TIM16_IS_CLK_ENABLED -#define __TIM16_IS_CLK_DISABLED __HAL_RCC_TIM16_IS_CLK_DISABLED -#define __TIM17_IS_CLK_ENABLED __HAL_RCC_TIM17_IS_CLK_ENABLED -#define __TIM17_IS_CLK_DISABLED __HAL_RCC_TIM17_IS_CLK_DISABLED -#define __TIM18_IS_CLK_ENABLED __HAL_RCC_TIM18_IS_CLK_ENABLED -#define __TIM18_IS_CLK_DISABLED __HAL_RCC_TIM18_IS_CLK_DISABLED -#define __TIM19_IS_CLK_ENABLED __HAL_RCC_TIM19_IS_CLK_ENABLED -#define __TIM19_IS_CLK_DISABLED __HAL_RCC_TIM19_IS_CLK_DISABLED -#define __TIM20_IS_CLK_ENABLED __HAL_RCC_TIM20_IS_CLK_ENABLED -#define __TIM20_IS_CLK_DISABLED __HAL_RCC_TIM20_IS_CLK_DISABLED -#define __TSC_IS_CLK_ENABLED __HAL_RCC_TSC_IS_CLK_ENABLED -#define __TSC_IS_CLK_DISABLED __HAL_RCC_TSC_IS_CLK_DISABLED -#define __UART4_IS_CLK_ENABLED __HAL_RCC_UART4_IS_CLK_ENABLED -#define __UART4_IS_CLK_DISABLED __HAL_RCC_UART4_IS_CLK_DISABLED -#define __UART5_IS_CLK_ENABLED __HAL_RCC_UART5_IS_CLK_ENABLED -#define __UART5_IS_CLK_DISABLED __HAL_RCC_UART5_IS_CLK_DISABLED -#define __USART1_IS_CLK_ENABLED __HAL_RCC_USART1_IS_CLK_ENABLED -#define __USART1_IS_CLK_DISABLED __HAL_RCC_USART1_IS_CLK_DISABLED -#define __USART2_IS_CLK_ENABLED __HAL_RCC_USART2_IS_CLK_ENABLED -#define __USART2_IS_CLK_DISABLED __HAL_RCC_USART2_IS_CLK_DISABLED -#define __USART3_IS_CLK_ENABLED __HAL_RCC_USART3_IS_CLK_ENABLED -#define __USART3_IS_CLK_DISABLED __HAL_RCC_USART3_IS_CLK_DISABLED -#define __USB_IS_CLK_ENABLED __HAL_RCC_USB_IS_CLK_ENABLED -#define __USB_IS_CLK_DISABLED __HAL_RCC_USB_IS_CLK_DISABLED -#define __WWDG_IS_CLK_ENABLED __HAL_RCC_WWDG_IS_CLK_ENABLED -#define __WWDG_IS_CLK_DISABLED __HAL_RCC_WWDG_IS_CLK_DISABLED - -#if defined(STM32F4) -#define __HAL_RCC_SDMMC1_FORCE_RESET __HAL_RCC_SDIO_FORCE_RESET -#define __HAL_RCC_SDMMC1_RELEASE_RESET __HAL_RCC_SDIO_RELEASE_RESET -#define __HAL_RCC_SDMMC1_CLK_SLEEP_ENABLE __HAL_RCC_SDIO_CLK_SLEEP_ENABLE -#define __HAL_RCC_SDMMC1_CLK_SLEEP_DISABLE __HAL_RCC_SDIO_CLK_SLEEP_DISABLE -#define __HAL_RCC_SDMMC1_CLK_ENABLE __HAL_RCC_SDIO_CLK_ENABLE -#define __HAL_RCC_SDMMC1_CLK_DISABLE __HAL_RCC_SDIO_CLK_DISABLE -#define __HAL_RCC_SDMMC1_IS_CLK_ENABLED __HAL_RCC_SDIO_IS_CLK_ENABLED -#define __HAL_RCC_SDMMC1_IS_CLK_DISABLED __HAL_RCC_SDIO_IS_CLK_DISABLED -#define Sdmmc1ClockSelection SdioClockSelection -#define RCC_PERIPHCLK_SDMMC1 RCC_PERIPHCLK_SDIO -#define RCC_SDMMC1CLKSOURCE_CLK48 RCC_SDIOCLKSOURCE_CK48 -#define RCC_SDMMC1CLKSOURCE_SYSCLK RCC_SDIOCLKSOURCE_SYSCLK -#define __HAL_RCC_SDMMC1_CONFIG __HAL_RCC_SDIO_CONFIG -#define __HAL_RCC_GET_SDMMC1_SOURCE __HAL_RCC_GET_SDIO_SOURCE -#endif - -#if defined(STM32F7) || defined(STM32L4) -#define __HAL_RCC_SDIO_FORCE_RESET __HAL_RCC_SDMMC1_FORCE_RESET -#define __HAL_RCC_SDIO_RELEASE_RESET __HAL_RCC_SDMMC1_RELEASE_RESET -#define __HAL_RCC_SDIO_CLK_SLEEP_ENABLE __HAL_RCC_SDMMC1_CLK_SLEEP_ENABLE -#define __HAL_RCC_SDIO_CLK_SLEEP_DISABLE __HAL_RCC_SDMMC1_CLK_SLEEP_DISABLE -#define __HAL_RCC_SDIO_CLK_ENABLE __HAL_RCC_SDMMC1_CLK_ENABLE -#define __HAL_RCC_SDIO_CLK_DISABLE __HAL_RCC_SDMMC1_CLK_DISABLE -#define __HAL_RCC_SDIO_IS_CLK_ENABLED __HAL_RCC_SDMMC1_IS_CLK_ENABLED -#define __HAL_RCC_SDIO_IS_CLK_DISABLED __HAL_RCC_SDMMC1_IS_CLK_DISABLED -#define SdioClockSelection Sdmmc1ClockSelection -#define RCC_PERIPHCLK_SDIO RCC_PERIPHCLK_SDMMC1 -#define __HAL_RCC_SDIO_CONFIG __HAL_RCC_SDMMC1_CONFIG -#define __HAL_RCC_GET_SDIO_SOURCE __HAL_RCC_GET_SDMMC1_SOURCE -#endif - -#if defined(STM32F7) -#define RCC_SDIOCLKSOURCE_CLK48 RCC_SDMMC1CLKSOURCE_CLK48 -#define RCC_SDIOCLKSOURCE_SYSCLK RCC_SDMMC1CLKSOURCE_SYSCLK -#endif - -#if defined(STM32H7) -#define __HAL_RCC_USB_OTG_HS_CLK_ENABLE() __HAL_RCC_USB1_OTG_HS_CLK_ENABLE() -#define __HAL_RCC_USB_OTG_HS_ULPI_CLK_ENABLE() __HAL_RCC_USB1_OTG_HS_ULPI_CLK_ENABLE() -#define __HAL_RCC_USB_OTG_HS_CLK_DISABLE() __HAL_RCC_USB1_OTG_HS_CLK_DISABLE() -#define __HAL_RCC_USB_OTG_HS_ULPI_CLK_DISABLE() __HAL_RCC_USB1_OTG_HS_ULPI_CLK_DISABLE() -#define __HAL_RCC_USB_OTG_HS_FORCE_RESET() __HAL_RCC_USB1_OTG_HS_FORCE_RESET() -#define __HAL_RCC_USB_OTG_HS_RELEASE_RESET() __HAL_RCC_USB1_OTG_HS_RELEASE_RESET() -#define __HAL_RCC_USB_OTG_HS_CLK_SLEEP_ENABLE() __HAL_RCC_USB1_OTG_HS_CLK_SLEEP_ENABLE() -#define __HAL_RCC_USB_OTG_HS_ULPI_CLK_SLEEP_ENABLE() __HAL_RCC_USB1_OTG_HS_ULPI_CLK_SLEEP_ENABLE() -#define __HAL_RCC_USB_OTG_HS_CLK_SLEEP_DISABLE() __HAL_RCC_USB1_OTG_HS_CLK_SLEEP_DISABLE() -#define __HAL_RCC_USB_OTG_HS_ULPI_CLK_SLEEP_DISABLE() __HAL_RCC_USB1_OTG_HS_ULPI_CLK_SLEEP_DISABLE() - -#define __HAL_RCC_USB_OTG_FS_CLK_ENABLE() __HAL_RCC_USB2_OTG_FS_CLK_ENABLE() -#define __HAL_RCC_USB_OTG_FS_ULPI_CLK_ENABLE() __HAL_RCC_USB2_OTG_FS_ULPI_CLK_ENABLE() -#define __HAL_RCC_USB_OTG_FS_CLK_DISABLE() __HAL_RCC_USB2_OTG_FS_CLK_DISABLE() -#define __HAL_RCC_USB_OTG_FS_ULPI_CLK_DISABLE() __HAL_RCC_USB2_OTG_FS_ULPI_CLK_DISABLE() -#define __HAL_RCC_USB_OTG_FS_FORCE_RESET() __HAL_RCC_USB2_OTG_FS_FORCE_RESET() -#define __HAL_RCC_USB_OTG_FS_RELEASE_RESET() __HAL_RCC_USB2_OTG_FS_RELEASE_RESET() -#define __HAL_RCC_USB_OTG_FS_CLK_SLEEP_ENABLE() __HAL_RCC_USB2_OTG_FS_CLK_SLEEP_ENABLE() -#define __HAL_RCC_USB_OTG_FS_ULPI_CLK_SLEEP_ENABLE() __HAL_RCC_USB2_OTG_FS_ULPI_CLK_SLEEP_ENABLE() -#define __HAL_RCC_USB_OTG_FS_CLK_SLEEP_DISABLE() __HAL_RCC_USB2_OTG_FS_CLK_SLEEP_DISABLE() -#define __HAL_RCC_USB_OTG_FS_ULPI_CLK_SLEEP_DISABLE() __HAL_RCC_USB2_OTG_FS_ULPI_CLK_SLEEP_DISABLE() -#endif - -#define __HAL_RCC_I2SCLK __HAL_RCC_I2S_CONFIG -#define __HAL_RCC_I2SCLK_CONFIG __HAL_RCC_I2S_CONFIG - -#define __RCC_PLLSRC RCC_GET_PLL_OSCSOURCE - -#define IS_RCC_MSIRANGE IS_RCC_MSI_CLOCK_RANGE -#define IS_RCC_RTCCLK_SOURCE IS_RCC_RTCCLKSOURCE -#define IS_RCC_SYSCLK_DIV IS_RCC_HCLK -#define IS_RCC_HCLK_DIV IS_RCC_PCLK -#define IS_RCC_PERIPHCLK IS_RCC_PERIPHCLOCK - -#define RCC_IT_HSI14 RCC_IT_HSI14RDY - -#define RCC_IT_CSSLSE RCC_IT_LSECSS -#define RCC_IT_CSSHSE RCC_IT_CSS - -#define RCC_PLLMUL_3 RCC_PLL_MUL3 -#define RCC_PLLMUL_4 RCC_PLL_MUL4 -#define RCC_PLLMUL_6 RCC_PLL_MUL6 -#define RCC_PLLMUL_8 RCC_PLL_MUL8 -#define RCC_PLLMUL_12 RCC_PLL_MUL12 -#define RCC_PLLMUL_16 RCC_PLL_MUL16 -#define RCC_PLLMUL_24 RCC_PLL_MUL24 -#define RCC_PLLMUL_32 RCC_PLL_MUL32 -#define RCC_PLLMUL_48 RCC_PLL_MUL48 - -#define RCC_PLLDIV_2 RCC_PLL_DIV2 -#define RCC_PLLDIV_3 RCC_PLL_DIV3 -#define RCC_PLLDIV_4 RCC_PLL_DIV4 - -#define IS_RCC_MCOSOURCE IS_RCC_MCO1SOURCE -#define __HAL_RCC_MCO_CONFIG __HAL_RCC_MCO1_CONFIG -#define RCC_MCO_NODIV RCC_MCODIV_1 -#define RCC_MCO_DIV1 RCC_MCODIV_1 -#define RCC_MCO_DIV2 RCC_MCODIV_2 -#define RCC_MCO_DIV4 RCC_MCODIV_4 -#define RCC_MCO_DIV8 RCC_MCODIV_8 -#define RCC_MCO_DIV16 RCC_MCODIV_16 -#define RCC_MCO_DIV32 RCC_MCODIV_32 -#define RCC_MCO_DIV64 RCC_MCODIV_64 -#define RCC_MCO_DIV128 RCC_MCODIV_128 -#define RCC_MCOSOURCE_NONE RCC_MCO1SOURCE_NOCLOCK -#define RCC_MCOSOURCE_LSI RCC_MCO1SOURCE_LSI -#define RCC_MCOSOURCE_LSE RCC_MCO1SOURCE_LSE -#define RCC_MCOSOURCE_SYSCLK RCC_MCO1SOURCE_SYSCLK -#define RCC_MCOSOURCE_HSI RCC_MCO1SOURCE_HSI -#define RCC_MCOSOURCE_HSI14 RCC_MCO1SOURCE_HSI14 -#define RCC_MCOSOURCE_HSI48 RCC_MCO1SOURCE_HSI48 -#define RCC_MCOSOURCE_HSE RCC_MCO1SOURCE_HSE -#define RCC_MCOSOURCE_PLLCLK_DIV1 RCC_MCO1SOURCE_PLLCLK -#define RCC_MCOSOURCE_PLLCLK_NODIV RCC_MCO1SOURCE_PLLCLK -#define RCC_MCOSOURCE_PLLCLK_DIV2 RCC_MCO1SOURCE_PLLCLK_DIV2 - -#if defined(STM32L4) -#define RCC_RTCCLKSOURCE_NO_CLK RCC_RTCCLKSOURCE_NONE -#elif defined(STM32WB) || defined(STM32G0) -#else -#define RCC_RTCCLKSOURCE_NONE RCC_RTCCLKSOURCE_NO_CLK -#endif - -#define RCC_USBCLK_PLLSAI1 RCC_USBCLKSOURCE_PLLSAI1 -#define RCC_USBCLK_PLL RCC_USBCLKSOURCE_PLL -#define RCC_USBCLK_MSI RCC_USBCLKSOURCE_MSI -#define RCC_USBCLKSOURCE_PLLCLK RCC_USBCLKSOURCE_PLL -#define RCC_USBPLLCLK_DIV1 RCC_USBCLKSOURCE_PLL -#define RCC_USBPLLCLK_DIV1_5 RCC_USBCLKSOURCE_PLL_DIV1_5 -#define RCC_USBPLLCLK_DIV2 RCC_USBCLKSOURCE_PLL_DIV2 -#define RCC_USBPLLCLK_DIV3 RCC_USBCLKSOURCE_PLL_DIV3 - -#define HSION_BitNumber RCC_HSION_BIT_NUMBER -#define HSION_BITNUMBER RCC_HSION_BIT_NUMBER -#define HSEON_BitNumber RCC_HSEON_BIT_NUMBER -#define HSEON_BITNUMBER RCC_HSEON_BIT_NUMBER -#define MSION_BITNUMBER RCC_MSION_BIT_NUMBER -#define CSSON_BitNumber RCC_CSSON_BIT_NUMBER -#define CSSON_BITNUMBER RCC_CSSON_BIT_NUMBER -#define PLLON_BitNumber RCC_PLLON_BIT_NUMBER -#define PLLON_BITNUMBER RCC_PLLON_BIT_NUMBER -#define PLLI2SON_BitNumber RCC_PLLI2SON_BIT_NUMBER -#define I2SSRC_BitNumber RCC_I2SSRC_BIT_NUMBER -#define RTCEN_BitNumber RCC_RTCEN_BIT_NUMBER -#define RTCEN_BITNUMBER RCC_RTCEN_BIT_NUMBER -#define BDRST_BitNumber RCC_BDRST_BIT_NUMBER -#define BDRST_BITNUMBER RCC_BDRST_BIT_NUMBER -#define RTCRST_BITNUMBER RCC_RTCRST_BIT_NUMBER -#define LSION_BitNumber RCC_LSION_BIT_NUMBER -#define LSION_BITNUMBER RCC_LSION_BIT_NUMBER -#define LSEON_BitNumber RCC_LSEON_BIT_NUMBER -#define LSEON_BITNUMBER RCC_LSEON_BIT_NUMBER -#define LSEBYP_BITNUMBER RCC_LSEBYP_BIT_NUMBER -#define PLLSAION_BitNumber RCC_PLLSAION_BIT_NUMBER -#define TIMPRE_BitNumber RCC_TIMPRE_BIT_NUMBER -#define RMVF_BitNumber RCC_RMVF_BIT_NUMBER -#define RMVF_BITNUMBER RCC_RMVF_BIT_NUMBER -#define RCC_CR2_HSI14TRIM_BitNumber RCC_HSI14TRIM_BIT_NUMBER -#define CR_BYTE2_ADDRESS RCC_CR_BYTE2_ADDRESS -#define CIR_BYTE1_ADDRESS RCC_CIR_BYTE1_ADDRESS -#define CIR_BYTE2_ADDRESS RCC_CIR_BYTE2_ADDRESS -#define BDCR_BYTE0_ADDRESS RCC_BDCR_BYTE0_ADDRESS -#define DBP_TIMEOUT_VALUE RCC_DBP_TIMEOUT_VALUE -#define LSE_TIMEOUT_VALUE RCC_LSE_TIMEOUT_VALUE - -#define CR_HSION_BB RCC_CR_HSION_BB -#define CR_CSSON_BB RCC_CR_CSSON_BB -#define CR_PLLON_BB RCC_CR_PLLON_BB -#define CR_PLLI2SON_BB RCC_CR_PLLI2SON_BB -#define CR_MSION_BB RCC_CR_MSION_BB -#define CSR_LSION_BB RCC_CSR_LSION_BB -#define CSR_LSEON_BB RCC_CSR_LSEON_BB -#define CSR_LSEBYP_BB RCC_CSR_LSEBYP_BB -#define CSR_RTCEN_BB RCC_CSR_RTCEN_BB -#define CSR_RTCRST_BB RCC_CSR_RTCRST_BB -#define CFGR_I2SSRC_BB RCC_CFGR_I2SSRC_BB -#define BDCR_RTCEN_BB RCC_BDCR_RTCEN_BB -#define BDCR_BDRST_BB RCC_BDCR_BDRST_BB -#define CR_HSEON_BB RCC_CR_HSEON_BB -#define CSR_RMVF_BB RCC_CSR_RMVF_BB -#define CR_PLLSAION_BB RCC_CR_PLLSAION_BB -#define DCKCFGR_TIMPRE_BB RCC_DCKCFGR_TIMPRE_BB - -#define __HAL_RCC_CRS_ENABLE_FREQ_ERROR_COUNTER __HAL_RCC_CRS_FREQ_ERROR_COUNTER_ENABLE -#define __HAL_RCC_CRS_DISABLE_FREQ_ERROR_COUNTER __HAL_RCC_CRS_FREQ_ERROR_COUNTER_DISABLE -#define __HAL_RCC_CRS_ENABLE_AUTOMATIC_CALIB __HAL_RCC_CRS_AUTOMATIC_CALIB_ENABLE -#define __HAL_RCC_CRS_DISABLE_AUTOMATIC_CALIB __HAL_RCC_CRS_AUTOMATIC_CALIB_DISABLE -#define __HAL_RCC_CRS_CALCULATE_RELOADVALUE __HAL_RCC_CRS_RELOADVALUE_CALCULATE - -#define __HAL_RCC_GET_IT_SOURCE __HAL_RCC_GET_IT - -#define RCC_CRS_SYNCWARM RCC_CRS_SYNCWARN -#define RCC_CRS_TRIMOV RCC_CRS_TRIMOVF - -#define RCC_PERIPHCLK_CK48 RCC_PERIPHCLK_CLK48 -#define RCC_CK48CLKSOURCE_PLLQ RCC_CLK48CLKSOURCE_PLLQ -#define RCC_CK48CLKSOURCE_PLLSAIP RCC_CLK48CLKSOURCE_PLLSAIP -#define RCC_CK48CLKSOURCE_PLLI2SQ RCC_CLK48CLKSOURCE_PLLI2SQ -#define IS_RCC_CK48CLKSOURCE IS_RCC_CLK48CLKSOURCE -#define RCC_SDIOCLKSOURCE_CK48 RCC_SDIOCLKSOURCE_CLK48 - -#define __HAL_RCC_DFSDM_CLK_ENABLE __HAL_RCC_DFSDM1_CLK_ENABLE -#define __HAL_RCC_DFSDM_CLK_DISABLE __HAL_RCC_DFSDM1_CLK_DISABLE -#define __HAL_RCC_DFSDM_IS_CLK_ENABLED __HAL_RCC_DFSDM1_IS_CLK_ENABLED -#define __HAL_RCC_DFSDM_IS_CLK_DISABLED __HAL_RCC_DFSDM1_IS_CLK_DISABLED -#define __HAL_RCC_DFSDM_FORCE_RESET __HAL_RCC_DFSDM1_FORCE_RESET -#define __HAL_RCC_DFSDM_RELEASE_RESET __HAL_RCC_DFSDM1_RELEASE_RESET -#define __HAL_RCC_DFSDM_CLK_SLEEP_ENABLE __HAL_RCC_DFSDM1_CLK_SLEEP_ENABLE -#define __HAL_RCC_DFSDM_CLK_SLEEP_DISABLE __HAL_RCC_DFSDM1_CLK_SLEEP_DISABLE -#define __HAL_RCC_DFSDM_IS_CLK_SLEEP_ENABLED __HAL_RCC_DFSDM1_IS_CLK_SLEEP_ENABLED -#define __HAL_RCC_DFSDM_IS_CLK_SLEEP_DISABLED __HAL_RCC_DFSDM1_IS_CLK_SLEEP_DISABLED -#define DfsdmClockSelection Dfsdm1ClockSelection -#define RCC_PERIPHCLK_DFSDM RCC_PERIPHCLK_DFSDM1 -#define RCC_DFSDMCLKSOURCE_PCLK RCC_DFSDM1CLKSOURCE_PCLK2 -#define RCC_DFSDMCLKSOURCE_SYSCLK RCC_DFSDM1CLKSOURCE_SYSCLK -#define __HAL_RCC_DFSDM_CONFIG __HAL_RCC_DFSDM1_CONFIG -#define __HAL_RCC_GET_DFSDM_SOURCE __HAL_RCC_GET_DFSDM1_SOURCE -#define RCC_DFSDM1CLKSOURCE_PCLK RCC_DFSDM1CLKSOURCE_PCLK2 -#define RCC_SWPMI1CLKSOURCE_PCLK RCC_SWPMI1CLKSOURCE_PCLK1 -#define RCC_LPTIM1CLKSOURCE_PCLK RCC_LPTIM1CLKSOURCE_PCLK1 -#define RCC_LPTIM2CLKSOURCE_PCLK RCC_LPTIM2CLKSOURCE_PCLK1 - -#define RCC_DFSDM1AUDIOCLKSOURCE_I2SAPB1 RCC_DFSDM1AUDIOCLKSOURCE_I2S1 -#define RCC_DFSDM1AUDIOCLKSOURCE_I2SAPB2 RCC_DFSDM1AUDIOCLKSOURCE_I2S2 -#define RCC_DFSDM2AUDIOCLKSOURCE_I2SAPB1 RCC_DFSDM2AUDIOCLKSOURCE_I2S1 -#define RCC_DFSDM2AUDIOCLKSOURCE_I2SAPB2 RCC_DFSDM2AUDIOCLKSOURCE_I2S2 -#define RCC_DFSDM1CLKSOURCE_APB2 RCC_DFSDM1CLKSOURCE_PCLK2 -#define RCC_DFSDM2CLKSOURCE_APB2 RCC_DFSDM2CLKSOURCE_PCLK2 -#define RCC_FMPI2C1CLKSOURCE_APB RCC_FMPI2C1CLKSOURCE_PCLK1 - -/** - * @} - */ - -/** @defgroup HAL_RNG_Aliased_Macros HAL RNG Aliased Macros maintained for legacy purpose - * @{ - */ -#define HAL_RNG_ReadyCallback(__HANDLE__) HAL_RNG_ReadyDataCallback((__HANDLE__), uint32_t random32bit) - -/** - * @} - */ - -/** @defgroup HAL_RTC_Aliased_Macros HAL RTC Aliased Macros maintained for legacy purpose - * @{ - */ -#if defined (STM32G0) || defined (STM32L412xx) || defined (STM32L422xx) || defined (STM32L4P5xx) || defined (STM32L4Q5xx) -#else -#define __HAL_RTC_CLEAR_FLAG __HAL_RTC_EXTI_CLEAR_FLAG -#endif -#define __HAL_RTC_DISABLE_IT __HAL_RTC_EXTI_DISABLE_IT -#define __HAL_RTC_ENABLE_IT __HAL_RTC_EXTI_ENABLE_IT - -#if defined (STM32F1) -#define __HAL_RTC_EXTI_CLEAR_FLAG(RTC_EXTI_LINE_ALARM_EVENT) __HAL_RTC_ALARM_EXTI_CLEAR_FLAG() - -#define __HAL_RTC_EXTI_ENABLE_IT(RTC_EXTI_LINE_ALARM_EVENT) __HAL_RTC_ALARM_EXTI_ENABLE_IT() - -#define __HAL_RTC_EXTI_DISABLE_IT(RTC_EXTI_LINE_ALARM_EVENT) __HAL_RTC_ALARM_EXTI_DISABLE_IT() - -#define __HAL_RTC_EXTI_GET_FLAG(RTC_EXTI_LINE_ALARM_EVENT) __HAL_RTC_ALARM_EXTI_GET_FLAG() - -#define __HAL_RTC_EXTI_GENERATE_SWIT(RTC_EXTI_LINE_ALARM_EVENT) __HAL_RTC_ALARM_EXTI_GENERATE_SWIT() -#else -#define __HAL_RTC_EXTI_CLEAR_FLAG(__EXTI_LINE__) (((__EXTI_LINE__) == RTC_EXTI_LINE_ALARM_EVENT) ? __HAL_RTC_ALARM_EXTI_CLEAR_FLAG() : \ - (((__EXTI_LINE__) == RTC_EXTI_LINE_WAKEUPTIMER_EVENT) ? __HAL_RTC_WAKEUPTIMER_EXTI_CLEAR_FLAG() : \ - __HAL_RTC_TAMPER_TIMESTAMP_EXTI_CLEAR_FLAG())) -#define __HAL_RTC_EXTI_ENABLE_IT(__EXTI_LINE__) (((__EXTI_LINE__) == RTC_EXTI_LINE_ALARM_EVENT) ? __HAL_RTC_ALARM_EXTI_ENABLE_IT() : \ - (((__EXTI_LINE__) == RTC_EXTI_LINE_WAKEUPTIMER_EVENT) ? __HAL_RTC_WAKEUPTIMER_EXTI_ENABLE_IT() : \ - __HAL_RTC_TAMPER_TIMESTAMP_EXTI_ENABLE_IT())) -#define __HAL_RTC_EXTI_DISABLE_IT(__EXTI_LINE__) (((__EXTI_LINE__) == RTC_EXTI_LINE_ALARM_EVENT) ? __HAL_RTC_ALARM_EXTI_DISABLE_IT() : \ - (((__EXTI_LINE__) == RTC_EXTI_LINE_WAKEUPTIMER_EVENT) ? __HAL_RTC_WAKEUPTIMER_EXTI_DISABLE_IT() : \ - __HAL_RTC_TAMPER_TIMESTAMP_EXTI_DISABLE_IT())) -#define __HAL_RTC_EXTI_GET_FLAG(__EXTI_LINE__) (((__EXTI_LINE__) == RTC_EXTI_LINE_ALARM_EVENT) ? __HAL_RTC_ALARM_EXTI_GET_FLAG() : \ - (((__EXTI_LINE__) == RTC_EXTI_LINE_WAKEUPTIMER_EVENT) ? __HAL_RTC_WAKEUPTIMER_EXTI_GET_FLAG() : \ - __HAL_RTC_TAMPER_TIMESTAMP_EXTI_GET_FLAG())) -#define __HAL_RTC_EXTI_GENERATE_SWIT(__EXTI_LINE__) (((__EXTI_LINE__) == RTC_EXTI_LINE_ALARM_EVENT) ? __HAL_RTC_ALARM_EXTI_GENERATE_SWIT() : \ - (((__EXTI_LINE__) == RTC_EXTI_LINE_WAKEUPTIMER_EVENT) ? __HAL_RTC_WAKEUPTIMER_EXTI_GENERATE_SWIT() : \ - __HAL_RTC_TAMPER_TIMESTAMP_EXTI_GENERATE_SWIT())) -#endif /* STM32F1 */ - -#define IS_ALARM IS_RTC_ALARM -#define IS_ALARM_MASK IS_RTC_ALARM_MASK -#define IS_TAMPER IS_RTC_TAMPER -#define IS_TAMPER_ERASE_MODE IS_RTC_TAMPER_ERASE_MODE -#define IS_TAMPER_FILTER IS_RTC_TAMPER_FILTER -#define IS_TAMPER_INTERRUPT IS_RTC_TAMPER_INTERRUPT -#define IS_TAMPER_MASKFLAG_STATE IS_RTC_TAMPER_MASKFLAG_STATE -#define IS_TAMPER_PRECHARGE_DURATION IS_RTC_TAMPER_PRECHARGE_DURATION -#define IS_TAMPER_PULLUP_STATE IS_RTC_TAMPER_PULLUP_STATE -#define IS_TAMPER_SAMPLING_FREQ IS_RTC_TAMPER_SAMPLING_FREQ -#define IS_TAMPER_TIMESTAMPONTAMPER_DETECTION IS_RTC_TAMPER_TIMESTAMPONTAMPER_DETECTION -#define IS_TAMPER_TRIGGER IS_RTC_TAMPER_TRIGGER -#define IS_WAKEUP_CLOCK IS_RTC_WAKEUP_CLOCK -#define IS_WAKEUP_COUNTER IS_RTC_WAKEUP_COUNTER - -#define __RTC_WRITEPROTECTION_ENABLE __HAL_RTC_WRITEPROTECTION_ENABLE -#define __RTC_WRITEPROTECTION_DISABLE __HAL_RTC_WRITEPROTECTION_DISABLE - -/** - * @} - */ - -/** @defgroup HAL_SD_Aliased_Macros HAL SD Aliased Macros maintained for legacy purpose - * @{ - */ - -#define SD_OCR_CID_CSD_OVERWRIETE SD_OCR_CID_CSD_OVERWRITE -#define SD_CMD_SD_APP_STAUS SD_CMD_SD_APP_STATUS - -#if defined(STM32F4) || defined(STM32F2) -#define SD_SDMMC_DISABLED SD_SDIO_DISABLED -#define SD_SDMMC_FUNCTION_BUSY SD_SDIO_FUNCTION_BUSY -#define SD_SDMMC_FUNCTION_FAILED SD_SDIO_FUNCTION_FAILED -#define SD_SDMMC_UNKNOWN_FUNCTION SD_SDIO_UNKNOWN_FUNCTION -#define SD_CMD_SDMMC_SEN_OP_COND SD_CMD_SDIO_SEN_OP_COND -#define SD_CMD_SDMMC_RW_DIRECT SD_CMD_SDIO_RW_DIRECT -#define SD_CMD_SDMMC_RW_EXTENDED SD_CMD_SDIO_RW_EXTENDED -#define __HAL_SD_SDMMC_ENABLE __HAL_SD_SDIO_ENABLE -#define __HAL_SD_SDMMC_DISABLE __HAL_SD_SDIO_DISABLE -#define __HAL_SD_SDMMC_DMA_ENABLE __HAL_SD_SDIO_DMA_ENABLE -#define __HAL_SD_SDMMC_DMA_DISABLE __HAL_SD_SDIO_DMA_DISABL -#define __HAL_SD_SDMMC_ENABLE_IT __HAL_SD_SDIO_ENABLE_IT -#define __HAL_SD_SDMMC_DISABLE_IT __HAL_SD_SDIO_DISABLE_IT -#define __HAL_SD_SDMMC_GET_FLAG __HAL_SD_SDIO_GET_FLAG -#define __HAL_SD_SDMMC_CLEAR_FLAG __HAL_SD_SDIO_CLEAR_FLAG -#define __HAL_SD_SDMMC_GET_IT __HAL_SD_SDIO_GET_IT -#define __HAL_SD_SDMMC_CLEAR_IT __HAL_SD_SDIO_CLEAR_IT -#define SDMMC_STATIC_FLAGS SDIO_STATIC_FLAGS -#define SDMMC_CMD0TIMEOUT SDIO_CMD0TIMEOUT -#define SD_SDMMC_SEND_IF_COND SD_SDIO_SEND_IF_COND -/* alias CMSIS */ -#define SDMMC1_IRQn SDIO_IRQn -#define SDMMC1_IRQHandler SDIO_IRQHandler -#endif - -#if defined(STM32F7) || defined(STM32L4) -#define SD_SDIO_DISABLED SD_SDMMC_DISABLED -#define SD_SDIO_FUNCTION_BUSY SD_SDMMC_FUNCTION_BUSY -#define SD_SDIO_FUNCTION_FAILED SD_SDMMC_FUNCTION_FAILED -#define SD_SDIO_UNKNOWN_FUNCTION SD_SDMMC_UNKNOWN_FUNCTION -#define SD_CMD_SDIO_SEN_OP_COND SD_CMD_SDMMC_SEN_OP_COND -#define SD_CMD_SDIO_RW_DIRECT SD_CMD_SDMMC_RW_DIRECT -#define SD_CMD_SDIO_RW_EXTENDED SD_CMD_SDMMC_RW_EXTENDED -#define __HAL_SD_SDIO_ENABLE __HAL_SD_SDMMC_ENABLE -#define __HAL_SD_SDIO_DISABLE __HAL_SD_SDMMC_DISABLE -#define __HAL_SD_SDIO_DMA_ENABLE __HAL_SD_SDMMC_DMA_ENABLE -#define __HAL_SD_SDIO_DMA_DISABL __HAL_SD_SDMMC_DMA_DISABLE -#define __HAL_SD_SDIO_ENABLE_IT __HAL_SD_SDMMC_ENABLE_IT -#define __HAL_SD_SDIO_DISABLE_IT __HAL_SD_SDMMC_DISABLE_IT -#define __HAL_SD_SDIO_GET_FLAG __HAL_SD_SDMMC_GET_FLAG -#define __HAL_SD_SDIO_CLEAR_FLAG __HAL_SD_SDMMC_CLEAR_FLAG -#define __HAL_SD_SDIO_GET_IT __HAL_SD_SDMMC_GET_IT -#define __HAL_SD_SDIO_CLEAR_IT __HAL_SD_SDMMC_CLEAR_IT -#define SDIO_STATIC_FLAGS SDMMC_STATIC_FLAGS -#define SDIO_CMD0TIMEOUT SDMMC_CMD0TIMEOUT -#define SD_SDIO_SEND_IF_COND SD_SDMMC_SEND_IF_COND -/* alias CMSIS for compatibilities */ -#define SDIO_IRQn SDMMC1_IRQn -#define SDIO_IRQHandler SDMMC1_IRQHandler -#endif - -#if defined(STM32F7) || defined(STM32F4) || defined(STM32F2) -#define HAL_SD_CardCIDTypedef HAL_SD_CardCIDTypeDef -#define HAL_SD_CardCSDTypedef HAL_SD_CardCSDTypeDef -#define HAL_SD_CardStatusTypedef HAL_SD_CardStatusTypeDef -#define HAL_SD_CardStateTypedef HAL_SD_CardStateTypeDef -#endif - -#if defined(STM32H7) -#define HAL_MMCEx_Read_DMADoubleBuffer0CpltCallback HAL_MMCEx_Read_DMADoubleBuf0CpltCallback -#define HAL_MMCEx_Read_DMADoubleBuffer1CpltCallback HAL_MMCEx_Read_DMADoubleBuf1CpltCallback -#define HAL_MMCEx_Write_DMADoubleBuffer0CpltCallback HAL_MMCEx_Write_DMADoubleBuf0CpltCallback -#define HAL_MMCEx_Write_DMADoubleBuffer1CpltCallback HAL_MMCEx_Write_DMADoubleBuf1CpltCallback -#define HAL_SDEx_Read_DMADoubleBuffer0CpltCallback HAL_SDEx_Read_DMADoubleBuf0CpltCallback -#define HAL_SDEx_Read_DMADoubleBuffer1CpltCallback HAL_SDEx_Read_DMADoubleBuf1CpltCallback -#define HAL_SDEx_Write_DMADoubleBuffer0CpltCallback HAL_SDEx_Write_DMADoubleBuf0CpltCallback -#define HAL_SDEx_Write_DMADoubleBuffer1CpltCallback HAL_SDEx_Write_DMADoubleBuf1CpltCallback -#define HAL_SD_DriveTransciver_1_8V_Callback HAL_SD_DriveTransceiver_1_8V_Callback -#endif -/** - * @} - */ - -/** @defgroup HAL_SMARTCARD_Aliased_Macros HAL SMARTCARD Aliased Macros maintained for legacy purpose - * @{ - */ - -#define __SMARTCARD_ENABLE_IT __HAL_SMARTCARD_ENABLE_IT -#define __SMARTCARD_DISABLE_IT __HAL_SMARTCARD_DISABLE_IT -#define __SMARTCARD_ENABLE __HAL_SMARTCARD_ENABLE -#define __SMARTCARD_DISABLE __HAL_SMARTCARD_DISABLE -#define __SMARTCARD_DMA_REQUEST_ENABLE __HAL_SMARTCARD_DMA_REQUEST_ENABLE -#define __SMARTCARD_DMA_REQUEST_DISABLE __HAL_SMARTCARD_DMA_REQUEST_DISABLE - -#define __HAL_SMARTCARD_GETCLOCKSOURCE SMARTCARD_GETCLOCKSOURCE -#define __SMARTCARD_GETCLOCKSOURCE SMARTCARD_GETCLOCKSOURCE - -#define IS_SMARTCARD_ONEBIT_SAMPLING IS_SMARTCARD_ONE_BIT_SAMPLE - -/** - * @} - */ - -/** @defgroup HAL_SMBUS_Aliased_Macros HAL SMBUS Aliased Macros maintained for legacy purpose - * @{ - */ -#define __HAL_SMBUS_RESET_CR1 SMBUS_RESET_CR1 -#define __HAL_SMBUS_RESET_CR2 SMBUS_RESET_CR2 -#define __HAL_SMBUS_GENERATE_START SMBUS_GENERATE_START -#define __HAL_SMBUS_GET_ADDR_MATCH SMBUS_GET_ADDR_MATCH -#define __HAL_SMBUS_GET_DIR SMBUS_GET_DIR -#define __HAL_SMBUS_GET_STOP_MODE SMBUS_GET_STOP_MODE -#define __HAL_SMBUS_GET_PEC_MODE SMBUS_GET_PEC_MODE -#define __HAL_SMBUS_GET_ALERT_ENABLED SMBUS_GET_ALERT_ENABLED -/** - * @} - */ - -/** @defgroup HAL_SPI_Aliased_Macros HAL SPI Aliased Macros maintained for legacy purpose - * @{ - */ - -#define __HAL_SPI_1LINE_TX SPI_1LINE_TX -#define __HAL_SPI_1LINE_RX SPI_1LINE_RX -#define __HAL_SPI_RESET_CRC SPI_RESET_CRC - -/** - * @} - */ - -/** @defgroup HAL_UART_Aliased_Macros HAL UART Aliased Macros maintained for legacy purpose - * @{ - */ - -#define __HAL_UART_GETCLOCKSOURCE UART_GETCLOCKSOURCE -#define __HAL_UART_MASK_COMPUTATION UART_MASK_COMPUTATION -#define __UART_GETCLOCKSOURCE UART_GETCLOCKSOURCE -#define __UART_MASK_COMPUTATION UART_MASK_COMPUTATION - -#define IS_UART_WAKEUPMETHODE IS_UART_WAKEUPMETHOD - -#define IS_UART_ONEBIT_SAMPLE IS_UART_ONE_BIT_SAMPLE -#define IS_UART_ONEBIT_SAMPLING IS_UART_ONE_BIT_SAMPLE - -/** - * @} - */ - - -/** @defgroup HAL_USART_Aliased_Macros HAL USART Aliased Macros maintained for legacy purpose - * @{ - */ - -#define __USART_ENABLE_IT __HAL_USART_ENABLE_IT -#define __USART_DISABLE_IT __HAL_USART_DISABLE_IT -#define __USART_ENABLE __HAL_USART_ENABLE -#define __USART_DISABLE __HAL_USART_DISABLE - -#define __HAL_USART_GETCLOCKSOURCE USART_GETCLOCKSOURCE -#define __USART_GETCLOCKSOURCE USART_GETCLOCKSOURCE - -/** - * @} - */ - -/** @defgroup HAL_USB_Aliased_Macros HAL USB Aliased Macros maintained for legacy purpose - * @{ - */ -#define USB_EXTI_LINE_WAKEUP USB_WAKEUP_EXTI_LINE - -#define USB_FS_EXTI_TRIGGER_RISING_EDGE USB_OTG_FS_WAKEUP_EXTI_RISING_EDGE -#define USB_FS_EXTI_TRIGGER_FALLING_EDGE USB_OTG_FS_WAKEUP_EXTI_FALLING_EDGE -#define USB_FS_EXTI_TRIGGER_BOTH_EDGE USB_OTG_FS_WAKEUP_EXTI_RISING_FALLING_EDGE -#define USB_FS_EXTI_LINE_WAKEUP USB_OTG_FS_WAKEUP_EXTI_LINE - -#define USB_HS_EXTI_TRIGGER_RISING_EDGE USB_OTG_HS_WAKEUP_EXTI_RISING_EDGE -#define USB_HS_EXTI_TRIGGER_FALLING_EDGE USB_OTG_HS_WAKEUP_EXTI_FALLING_EDGE -#define USB_HS_EXTI_TRIGGER_BOTH_EDGE USB_OTG_HS_WAKEUP_EXTI_RISING_FALLING_EDGE -#define USB_HS_EXTI_LINE_WAKEUP USB_OTG_HS_WAKEUP_EXTI_LINE - -#define __HAL_USB_EXTI_ENABLE_IT __HAL_USB_WAKEUP_EXTI_ENABLE_IT -#define __HAL_USB_EXTI_DISABLE_IT __HAL_USB_WAKEUP_EXTI_DISABLE_IT -#define __HAL_USB_EXTI_GET_FLAG __HAL_USB_WAKEUP_EXTI_GET_FLAG -#define __HAL_USB_EXTI_CLEAR_FLAG __HAL_USB_WAKEUP_EXTI_CLEAR_FLAG -#define __HAL_USB_EXTI_SET_RISING_EDGE_TRIGGER __HAL_USB_WAKEUP_EXTI_ENABLE_RISING_EDGE -#define __HAL_USB_EXTI_SET_FALLING_EDGE_TRIGGER __HAL_USB_WAKEUP_EXTI_ENABLE_FALLING_EDGE -#define __HAL_USB_EXTI_SET_FALLINGRISING_TRIGGER __HAL_USB_WAKEUP_EXTI_ENABLE_RISING_FALLING_EDGE - -#define __HAL_USB_FS_EXTI_ENABLE_IT __HAL_USB_OTG_FS_WAKEUP_EXTI_ENABLE_IT -#define __HAL_USB_FS_EXTI_DISABLE_IT __HAL_USB_OTG_FS_WAKEUP_EXTI_DISABLE_IT -#define __HAL_USB_FS_EXTI_GET_FLAG __HAL_USB_OTG_FS_WAKEUP_EXTI_GET_FLAG -#define __HAL_USB_FS_EXTI_CLEAR_FLAG __HAL_USB_OTG_FS_WAKEUP_EXTI_CLEAR_FLAG -#define __HAL_USB_FS_EXTI_SET_RISING_EGDE_TRIGGER __HAL_USB_OTG_FS_WAKEUP_EXTI_ENABLE_RISING_EDGE -#define __HAL_USB_FS_EXTI_SET_FALLING_EGDE_TRIGGER __HAL_USB_OTG_FS_WAKEUP_EXTI_ENABLE_FALLING_EDGE -#define __HAL_USB_FS_EXTI_SET_FALLINGRISING_TRIGGER __HAL_USB_OTG_FS_WAKEUP_EXTI_ENABLE_RISING_FALLING_EDGE -#define __HAL_USB_FS_EXTI_GENERATE_SWIT __HAL_USB_OTG_FS_WAKEUP_EXTI_GENERATE_SWIT - -#define __HAL_USB_HS_EXTI_ENABLE_IT __HAL_USB_OTG_HS_WAKEUP_EXTI_ENABLE_IT -#define __HAL_USB_HS_EXTI_DISABLE_IT __HAL_USB_OTG_HS_WAKEUP_EXTI_DISABLE_IT -#define __HAL_USB_HS_EXTI_GET_FLAG __HAL_USB_OTG_HS_WAKEUP_EXTI_GET_FLAG -#define __HAL_USB_HS_EXTI_CLEAR_FLAG __HAL_USB_OTG_HS_WAKEUP_EXTI_CLEAR_FLAG -#define __HAL_USB_HS_EXTI_SET_RISING_EGDE_TRIGGER __HAL_USB_OTG_HS_WAKEUP_EXTI_ENABLE_RISING_EDGE -#define __HAL_USB_HS_EXTI_SET_FALLING_EGDE_TRIGGER __HAL_USB_OTG_HS_WAKEUP_EXTI_ENABLE_FALLING_EDGE -#define __HAL_USB_HS_EXTI_SET_FALLINGRISING_TRIGGER __HAL_USB_OTG_HS_WAKEUP_EXTI_ENABLE_RISING_FALLING_EDGE -#define __HAL_USB_HS_EXTI_GENERATE_SWIT __HAL_USB_OTG_HS_WAKEUP_EXTI_GENERATE_SWIT - -#define HAL_PCD_ActiveRemoteWakeup HAL_PCD_ActivateRemoteWakeup -#define HAL_PCD_DeActiveRemoteWakeup HAL_PCD_DeActivateRemoteWakeup - -#define HAL_PCD_SetTxFiFo HAL_PCDEx_SetTxFiFo -#define HAL_PCD_SetRxFiFo HAL_PCDEx_SetRxFiFo -/** - * @} - */ - -/** @defgroup HAL_TIM_Aliased_Macros HAL TIM Aliased Macros maintained for legacy purpose - * @{ - */ -#define __HAL_TIM_SetICPrescalerValue TIM_SET_ICPRESCALERVALUE -#define __HAL_TIM_ResetICPrescalerValue TIM_RESET_ICPRESCALERVALUE - -#define TIM_GET_ITSTATUS __HAL_TIM_GET_IT_SOURCE -#define TIM_GET_CLEAR_IT __HAL_TIM_CLEAR_IT - -#define __HAL_TIM_GET_ITSTATUS __HAL_TIM_GET_IT_SOURCE - -#define __HAL_TIM_DIRECTION_STATUS __HAL_TIM_IS_TIM_COUNTING_DOWN -#define __HAL_TIM_PRESCALER __HAL_TIM_SET_PRESCALER -#define __HAL_TIM_SetCounter __HAL_TIM_SET_COUNTER -#define __HAL_TIM_GetCounter __HAL_TIM_GET_COUNTER -#define __HAL_TIM_SetAutoreload __HAL_TIM_SET_AUTORELOAD -#define __HAL_TIM_GetAutoreload __HAL_TIM_GET_AUTORELOAD -#define __HAL_TIM_SetClockDivision __HAL_TIM_SET_CLOCKDIVISION -#define __HAL_TIM_GetClockDivision __HAL_TIM_GET_CLOCKDIVISION -#define __HAL_TIM_SetICPrescaler __HAL_TIM_SET_ICPRESCALER -#define __HAL_TIM_GetICPrescaler __HAL_TIM_GET_ICPRESCALER -#define __HAL_TIM_SetCompare __HAL_TIM_SET_COMPARE -#define __HAL_TIM_GetCompare __HAL_TIM_GET_COMPARE - -#define TIM_BREAKINPUTSOURCE_DFSDM TIM_BREAKINPUTSOURCE_DFSDM1 -/** - * @} - */ - -/** @defgroup HAL_ETH_Aliased_Macros HAL ETH Aliased Macros maintained for legacy purpose - * @{ - */ - -#define __HAL_ETH_EXTI_ENABLE_IT __HAL_ETH_WAKEUP_EXTI_ENABLE_IT -#define __HAL_ETH_EXTI_DISABLE_IT __HAL_ETH_WAKEUP_EXTI_DISABLE_IT -#define __HAL_ETH_EXTI_GET_FLAG __HAL_ETH_WAKEUP_EXTI_GET_FLAG -#define __HAL_ETH_EXTI_CLEAR_FLAG __HAL_ETH_WAKEUP_EXTI_CLEAR_FLAG -#define __HAL_ETH_EXTI_SET_RISING_EGDE_TRIGGER __HAL_ETH_WAKEUP_EXTI_ENABLE_RISING_EDGE_TRIGGER -#define __HAL_ETH_EXTI_SET_FALLING_EGDE_TRIGGER __HAL_ETH_WAKEUP_EXTI_ENABLE_FALLING_EDGE_TRIGGER -#define __HAL_ETH_EXTI_SET_FALLINGRISING_TRIGGER __HAL_ETH_WAKEUP_EXTI_ENABLE_FALLINGRISING_TRIGGER - -#define ETH_PROMISCIOUSMODE_ENABLE ETH_PROMISCUOUS_MODE_ENABLE -#define ETH_PROMISCIOUSMODE_DISABLE ETH_PROMISCUOUS_MODE_DISABLE -#define IS_ETH_PROMISCIOUS_MODE IS_ETH_PROMISCUOUS_MODE -/** - * @} - */ - -/** @defgroup HAL_LTDC_Aliased_Macros HAL LTDC Aliased Macros maintained for legacy purpose - * @{ - */ -#define __HAL_LTDC_LAYER LTDC_LAYER -#define __HAL_LTDC_RELOAD_CONFIG __HAL_LTDC_RELOAD_IMMEDIATE_CONFIG -/** - * @} - */ - -/** @defgroup HAL_SAI_Aliased_Macros HAL SAI Aliased Macros maintained for legacy purpose - * @{ - */ -#define SAI_OUTPUTDRIVE_DISABLED SAI_OUTPUTDRIVE_DISABLE -#define SAI_OUTPUTDRIVE_ENABLED SAI_OUTPUTDRIVE_ENABLE -#define SAI_MASTERDIVIDER_ENABLED SAI_MASTERDIVIDER_ENABLE -#define SAI_MASTERDIVIDER_DISABLED SAI_MASTERDIVIDER_DISABLE -#define SAI_STREOMODE SAI_STEREOMODE -#define SAI_FIFOStatus_Empty SAI_FIFOSTATUS_EMPTY -#define SAI_FIFOStatus_Less1QuarterFull SAI_FIFOSTATUS_LESS1QUARTERFULL -#define SAI_FIFOStatus_1QuarterFull SAI_FIFOSTATUS_1QUARTERFULL -#define SAI_FIFOStatus_HalfFull SAI_FIFOSTATUS_HALFFULL -#define SAI_FIFOStatus_3QuartersFull SAI_FIFOSTATUS_3QUARTERFULL -#define SAI_FIFOStatus_Full SAI_FIFOSTATUS_FULL -#define IS_SAI_BLOCK_MONO_STREO_MODE IS_SAI_BLOCK_MONO_STEREO_MODE -#define SAI_SYNCHRONOUS_EXT SAI_SYNCHRONOUS_EXT_SAI1 -#define SAI_SYNCEXT_IN_ENABLE SAI_SYNCEXT_OUTBLOCKA_ENABLE -/** - * @} - */ - -/** @defgroup HAL_SPDIFRX_Aliased_Macros HAL SPDIFRX Aliased Macros maintained for legacy purpose - * @{ - */ -#if defined(STM32H7) -#define HAL_SPDIFRX_ReceiveControlFlow HAL_SPDIFRX_ReceiveCtrlFlow -#define HAL_SPDIFRX_ReceiveControlFlow_IT HAL_SPDIFRX_ReceiveCtrlFlow_IT -#define HAL_SPDIFRX_ReceiveControlFlow_DMA HAL_SPDIFRX_ReceiveCtrlFlow_DMA -#endif -/** - * @} - */ - -/** @defgroup HAL_HRTIM_Aliased_Functions HAL HRTIM Aliased Functions maintained for legacy purpose - * @{ - */ -#if defined (STM32H7) || defined (STM32F3) -#define HAL_HRTIM_WaveformCounterStart_IT HAL_HRTIM_WaveformCountStart_IT -#define HAL_HRTIM_WaveformCounterStart_DMA HAL_HRTIM_WaveformCountStart_DMA -#define HAL_HRTIM_WaveformCounterStart HAL_HRTIM_WaveformCountStart -#define HAL_HRTIM_WaveformCounterStop_IT HAL_HRTIM_WaveformCountStop_IT -#define HAL_HRTIM_WaveformCounterStop_DMA HAL_HRTIM_WaveformCountStop_DMA -#define HAL_HRTIM_WaveformCounterStop HAL_HRTIM_WaveformCountStop -#endif -/** - * @} - */ - -/** @defgroup HAL_PPP_Aliased_Macros HAL PPP Aliased Macros maintained for legacy purpose - * @{ - */ - -/** - * @} - */ - -#ifdef __cplusplus -} -#endif - -#endif /* STM32_HAL_LEGACY */ - -/************************ (C) COPYRIGHT STMicroelectronics *****END OF FILE****/ - diff --git a/test_dma/Drivers/STM32F7xx_HAL_Driver/Inc/stm32f7xx_hal.h b/test_dma/Drivers/STM32F7xx_HAL_Driver/Inc/stm32f7xx_hal.h deleted file mode 100644 index bc029ab..0000000 --- a/test_dma/Drivers/STM32F7xx_HAL_Driver/Inc/stm32f7xx_hal.h +++ /dev/null @@ -1,276 +0,0 @@ -/** - ****************************************************************************** - * @file stm32f7xx_hal.h - * @author MCD Application Team - * @brief This file contains all the functions prototypes for the HAL - * module driver. - ****************************************************************************** - * @attention - * - *

© Copyright (c) 2017 STMicroelectronics. - * All rights reserved.

- * - * This software component is licensed by ST under BSD 3-Clause license, - * the "License"; You may not use this file except in compliance with the - * License. You may obtain a copy of the License at: - * opensource.org/licenses/BSD-3-Clause - * - ****************************************************************************** - */ - -/* Define to prevent recursive inclusion -------------------------------------*/ -#ifndef __STM32F7xx_HAL_H -#define __STM32F7xx_HAL_H - -#ifdef __cplusplus - extern "C" { -#endif - -/* Includes ------------------------------------------------------------------*/ -#include "stm32f7xx_hal_conf.h" - -/** @addtogroup STM32F7xx_HAL_Driver - * @{ - */ - -/** @addtogroup HAL - * @{ - */ - -/* Exported types ------------------------------------------------------------*/ -/* Exported constants --------------------------------------------------------*/ - -/** @defgroup HAL_Exported_Constants HAL Exported Constants - * @{ - */ - -/** @defgroup HAL_TICK_FREQ Tick Frequency - * @{ - */ -typedef enum -{ - HAL_TICK_FREQ_10HZ = 100U, - HAL_TICK_FREQ_100HZ = 10U, - HAL_TICK_FREQ_1KHZ = 1U, - HAL_TICK_FREQ_DEFAULT = HAL_TICK_FREQ_1KHZ -} HAL_TickFreqTypeDef; -/** - * @} - */ - -/** @defgroup SYSCFG_BootMode Boot Mode - * @{ - */ -#define SYSCFG_MEM_BOOT_ADD0 ((uint32_t)0x00000000U) -#define SYSCFG_MEM_BOOT_ADD1 SYSCFG_MEMRMP_MEM_BOOT -/** - * @} - */ - -/** - * @} - */ - -/* Exported macro ------------------------------------------------------------*/ -/** @defgroup HAL_Exported_Macros HAL Exported Macros - * @{ - */ - -/** @brief Freeze/Unfreeze Peripherals in Debug mode - */ -#define __HAL_DBGMCU_FREEZE_TIM2() (DBGMCU->APB1FZ |= (DBGMCU_APB1_FZ_DBG_TIM2_STOP)) -#define __HAL_DBGMCU_FREEZE_TIM3() (DBGMCU->APB1FZ |= (DBGMCU_APB1_FZ_DBG_TIM3_STOP)) -#define __HAL_DBGMCU_FREEZE_TIM4() (DBGMCU->APB1FZ |= (DBGMCU_APB1_FZ_DBG_TIM4_STOP)) -#define __HAL_DBGMCU_FREEZE_TIM5() (DBGMCU->APB1FZ |= (DBGMCU_APB1_FZ_DBG_TIM5_STOP)) -#define __HAL_DBGMCU_FREEZE_TIM6() (DBGMCU->APB1FZ |= (DBGMCU_APB1_FZ_DBG_TIM6_STOP)) -#define __HAL_DBGMCU_FREEZE_TIM7() (DBGMCU->APB1FZ |= (DBGMCU_APB1_FZ_DBG_TIM7_STOP)) -#define __HAL_DBGMCU_FREEZE_TIM12() (DBGMCU->APB1FZ |= (DBGMCU_APB1_FZ_DBG_TIM12_STOP)) -#define __HAL_DBGMCU_FREEZE_TIM13() (DBGMCU->APB1FZ |= (DBGMCU_APB1_FZ_DBG_TIM13_STOP)) -#define __HAL_DBGMCU_FREEZE_TIM14() (DBGMCU->APB1FZ |= (DBGMCU_APB1_FZ_DBG_TIM14_STOP)) -#define __HAL_DBGMCU_FREEZE_LPTIM1() (DBGMCU->APB1FZ |= (DBGMCU_APB1_FZ_DBG_LPTIM1_STOP)) -#define __HAL_DBGMCU_FREEZE_RTC() (DBGMCU->APB1FZ |= (DBGMCU_APB1_FZ_DBG_RTC_STOP)) -#define __HAL_DBGMCU_FREEZE_WWDG() (DBGMCU->APB1FZ |= (DBGMCU_APB1_FZ_DBG_WWDG_STOP)) -#define __HAL_DBGMCU_FREEZE_IWDG() (DBGMCU->APB1FZ |= (DBGMCU_APB1_FZ_DBG_IWDG_STOP)) -#define __HAL_DBGMCU_FREEZE_I2C1_TIMEOUT() (DBGMCU->APB1FZ |= (DBGMCU_APB1_FZ_DBG_I2C1_SMBUS_TIMEOUT)) -#define __HAL_DBGMCU_FREEZE_I2C2_TIMEOUT() (DBGMCU->APB1FZ |= (DBGMCU_APB1_FZ_DBG_I2C2_SMBUS_TIMEOUT)) -#define __HAL_DBGMCU_FREEZE_I2C3_TIMEOUT() (DBGMCU->APB1FZ |= (DBGMCU_APB1_FZ_DBG_I2C3_SMBUS_TIMEOUT)) -#define __HAL_DBGMCU_FREEZE_I2C4_TIMEOUT() (DBGMCU->APB1FZ |= (DBGMCU_APB1_FZ_DBG_I2C4_SMBUS_TIMEOUT)) -#define __HAL_DBGMCU_FREEZE_CAN1() (DBGMCU->APB1FZ |= (DBGMCU_APB1_FZ_DBG_CAN1_STOP)) -#define __HAL_DBGMCU_FREEZE_CAN2() (DBGMCU->APB1FZ |= (DBGMCU_APB1_FZ_DBG_CAN2_STOP)) -#define __HAL_DBGMCU_FREEZE_TIM1() (DBGMCU->APB2FZ |= (DBGMCU_APB2_FZ_DBG_TIM1_STOP)) -#define __HAL_DBGMCU_FREEZE_TIM8() (DBGMCU->APB2FZ |= (DBGMCU_APB2_FZ_DBG_TIM8_STOP)) -#define __HAL_DBGMCU_FREEZE_TIM9() (DBGMCU->APB2FZ |= (DBGMCU_APB2_FZ_DBG_TIM9_STOP)) -#define __HAL_DBGMCU_FREEZE_TIM10() (DBGMCU->APB2FZ |= (DBGMCU_APB2_FZ_DBG_TIM10_STOP)) -#define __HAL_DBGMCU_FREEZE_TIM11() (DBGMCU->APB2FZ |= (DBGMCU_APB2_FZ_DBG_TIM11_STOP)) - -#define __HAL_DBGMCU_UNFREEZE_TIM2() (DBGMCU->APB1FZ &= ~(DBGMCU_APB1_FZ_DBG_TIM2_STOP)) -#define __HAL_DBGMCU_UNFREEZE_TIM3() (DBGMCU->APB1FZ &= ~(DBGMCU_APB1_FZ_DBG_TIM3_STOP)) -#define __HAL_DBGMCU_UNFREEZE_TIM4() (DBGMCU->APB1FZ &= ~(DBGMCU_APB1_FZ_DBG_TIM4_STOP)) -#define __HAL_DBGMCU_UNFREEZE_TIM5() (DBGMCU->APB1FZ &= ~(DBGMCU_APB1_FZ_DBG_TIM5_STOP)) -#define __HAL_DBGMCU_UNFREEZE_TIM6() (DBGMCU->APB1FZ &= ~(DBGMCU_APB1_FZ_DBG_TIM6_STOP)) -#define __HAL_DBGMCU_UNFREEZE_TIM7() (DBGMCU->APB1FZ &= ~(DBGMCU_APB1_FZ_DBG_TIM7_STOP)) -#define __HAL_DBGMCU_UNFREEZE_TIM12() (DBGMCU->APB1FZ &= ~(DBGMCU_APB1_FZ_DBG_TIM12_STOP)) -#define __HAL_DBGMCU_UNFREEZE_TIM13() (DBGMCU->APB1FZ &= ~(DBGMCU_APB1_FZ_DBG_TIM13_STOP)) -#define __HAL_DBGMCU_UNFREEZE_TIM14() (DBGMCU->APB1FZ &= ~(DBGMCU_APB1_FZ_DBG_TIM14_STOP)) -#define __HAL_DBGMCU_UNFREEZE_LPTIM1() (DBGMCU->APB1FZ &= ~(DBGMCU_APB1_FZ_DBG_LPTIM1_STOP)) -#define __HAL_DBGMCU_UNFREEZE_RTC() (DBGMCU->APB1FZ &= ~(DBGMCU_APB1_FZ_DBG_RTC_STOP)) -#define __HAL_DBGMCU_UNFREEZE_WWDG() (DBGMCU->APB1FZ &= ~(DBGMCU_APB1_FZ_DBG_WWDG_STOP)) -#define __HAL_DBGMCU_UNFREEZE_IWDG() (DBGMCU->APB1FZ &= ~(DBGMCU_APB1_FZ_DBG_IWDG_STOP)) -#define __HAL_DBGMCU_UNFREEZE_I2C1_TIMEOUT() (DBGMCU->APB1FZ &= ~(DBGMCU_APB1_FZ_DBG_I2C1_SMBUS_TIMEOUT)) -#define __HAL_DBGMCU_UNFREEZE_I2C2_TIMEOUT() (DBGMCU->APB1FZ &= ~(DBGMCU_APB1_FZ_DBG_I2C2_SMBUS_TIMEOUT)) -#define __HAL_DBGMCU_UNFREEZE_I2C3_TIMEOUT() (DBGMCU->APB1FZ &= ~(DBGMCU_APB1_FZ_DBG_I2C3_SMBUS_TIMEOUT)) -#define __HAL_DBGMCU_UNFREEZE_I2C4_TIMEOUT() (DBGMCU->APB1FZ &= ~(DBGMCU_APB1_FZ_DBG_I2C4_SMBUS_TIMEOUT)) -#define __HAL_DBGMCU_UNFREEZE_CAN1() (DBGMCU->APB1FZ &= ~(DBGMCU_APB1_FZ_DBG_CAN1_STOP)) -#define __HAL_DBGMCU_UNFREEZE_CAN2() (DBGMCU->APB1FZ &= ~(DBGMCU_APB1_FZ_DBG_CAN2_STOP)) -#define __HAL_DBGMCU_UNFREEZE_TIM1() (DBGMCU->APB2FZ &= ~(DBGMCU_APB2_FZ_DBG_TIM1_STOP)) -#define __HAL_DBGMCU_UNFREEZE_TIM8() (DBGMCU->APB2FZ &= ~(DBGMCU_APB2_FZ_DBG_TIM8_STOP)) -#define __HAL_DBGMCU_UNFREEZE_TIM9() (DBGMCU->APB2FZ &= ~(DBGMCU_APB2_FZ_DBG_TIM9_STOP)) -#define __HAL_DBGMCU_UNFREEZE_TIM10() (DBGMCU->APB2FZ &= ~(DBGMCU_APB2_FZ_DBG_TIM10_STOP)) -#define __HAL_DBGMCU_UNFREEZE_TIM11() (DBGMCU->APB2FZ &= ~(DBGMCU_APB2_FZ_DBG_TIM11_STOP)) - - -/** @brief FMC (NOR/RAM) mapped at 0x60000000 and SDRAM mapped at 0xC0000000 - */ -#define __HAL_SYSCFG_REMAPMEMORY_FMC() (SYSCFG->MEMRMP &= ~(SYSCFG_MEMRMP_SWP_FMC)) - - -/** @brief FMC/SDRAM mapped at 0x60000000 (NOR/RAM) mapped at 0xC0000000 - */ -#define __HAL_SYSCFG_REMAPMEMORY_FMC_SDRAM() do {SYSCFG->MEMRMP &= ~(SYSCFG_MEMRMP_SWP_FMC);\ - SYSCFG->MEMRMP |= (SYSCFG_MEMRMP_SWP_FMC_0);\ - }while(0); -/** - * @brief Return the memory boot mapping as configured by user. - * @retval The boot mode as configured by user. The returned value can be one - * of the following values: - * @arg @ref SYSCFG_MEM_BOOT_ADD0 - * @arg @ref SYSCFG_MEM_BOOT_ADD1 - */ -#define __HAL_SYSCFG_GET_BOOT_MODE() READ_BIT(SYSCFG->MEMRMP, SYSCFG_MEMRMP_MEM_BOOT) - -#if defined (STM32F765xx) || defined (STM32F767xx) || defined (STM32F769xx) || defined (STM32F777xx) || defined (STM32F779xx) -/** @brief SYSCFG Break Cortex-M7 Lockup lock. - * Enable and lock the connection of Cortex-M7 LOCKUP (Hardfault) output to TIM1/8 Break input. - * @note The selected configuration is locked and can be unlocked only by system reset. - */ -#define __HAL_SYSCFG_BREAK_LOCKUP_LOCK() SET_BIT(SYSCFG->CBR, SYSCFG_CBR_CLL) - -/** @brief SYSCFG Break PVD lock. - * Enable and lock the PVD connection to Timer1/8 Break input, as well as the PVDE and PLS[2:0] in the PWR_CR1 register. - * @note The selected configuration is locked and can be unlocked only by system reset. - */ -#define __HAL_SYSCFG_BREAK_PVD_LOCK() SET_BIT(SYSCFG->CBR, SYSCFG_CBR_PVDL) -#endif /* STM32F765xx || STM32F767xx || STM32F769xx || STM32F777xx || STM32F779xx */ - -/** - * @} - */ - -/** @defgroup HAL_Private_Macros HAL Private Macros - * @{ - */ -#define IS_TICKFREQ(FREQ) (((FREQ) == HAL_TICK_FREQ_10HZ) || \ - ((FREQ) == HAL_TICK_FREQ_100HZ) || \ - ((FREQ) == HAL_TICK_FREQ_1KHZ)) -/** - * @} - */ -/* Exported functions --------------------------------------------------------*/ -/** @addtogroup HAL_Exported_Functions - * @{ - */ -/** @addtogroup HAL_Exported_Functions_Group1 - * @{ - */ -/* Initialization and Configuration functions ******************************/ -HAL_StatusTypeDef HAL_Init(void); -HAL_StatusTypeDef HAL_DeInit(void); -void HAL_MspInit(void); -void HAL_MspDeInit(void); -HAL_StatusTypeDef HAL_InitTick(uint32_t TickPriority); -/** - * @} - */ - - /* Exported variables ---------------------------------------------------------*/ -/** @addtogroup HAL_Exported_Variables - * @{ - */ -extern __IO uint32_t uwTick; -extern uint32_t uwTickPrio; -extern HAL_TickFreqTypeDef uwTickFreq; -/** - * @} - */ - -/** @addtogroup HAL_Exported_Functions_Group2 - * @{ - */ -/* Peripheral Control functions ************************************************/ -void HAL_IncTick(void); -void HAL_Delay(uint32_t Delay); -uint32_t HAL_GetTick(void); -uint32_t HAL_GetTickPrio(void); -HAL_StatusTypeDef HAL_SetTickFreq(HAL_TickFreqTypeDef Freq); -HAL_TickFreqTypeDef HAL_GetTickFreq(void); -void HAL_SuspendTick(void); -void HAL_ResumeTick(void); -uint32_t HAL_GetHalVersion(void); -uint32_t HAL_GetREVID(void); -uint32_t HAL_GetDEVID(void); -uint32_t HAL_GetUIDw0(void); -uint32_t HAL_GetUIDw1(void); -uint32_t HAL_GetUIDw2(void); -void HAL_DBGMCU_EnableDBGSleepMode(void); -void HAL_DBGMCU_DisableDBGSleepMode(void); -void HAL_DBGMCU_EnableDBGStopMode(void); -void HAL_DBGMCU_DisableDBGStopMode(void); -void HAL_DBGMCU_EnableDBGStandbyMode(void); -void HAL_DBGMCU_DisableDBGStandbyMode(void); -void HAL_EnableCompensationCell(void); -void HAL_DisableCompensationCell(void); -void HAL_EnableFMCMemorySwapping(void); -void HAL_DisableFMCMemorySwapping(void); -#if defined (STM32F765xx) || defined (STM32F767xx) || defined (STM32F769xx) || defined (STM32F777xx) || defined (STM32F779xx) -void HAL_EnableMemorySwappingBank(void); -void HAL_DisableMemorySwappingBank(void); -#endif /* STM32F765xx || STM32F767xx || STM32F769xx || STM32F777xx || STM32F779xx */ -/** - * @} - */ - -/** - * @} - */ -/* Private types -------------------------------------------------------------*/ -/* Private variables ---------------------------------------------------------*/ -/** @defgroup HAL_Private_Variables HAL Private Variables - * @{ - */ -/** - * @} - */ -/* Private constants ---------------------------------------------------------*/ -/** @defgroup HAL_Private_Constants HAL Private Constants - * @{ - */ -/** - * @} - */ -/* Private macros ------------------------------------------------------------*/ -/* Private functions ---------------------------------------------------------*/ -/** - * @} - */ - -/** - * @} - */ - -#ifdef __cplusplus -} -#endif - -#endif /* __STM32F7xx_HAL_H */ - -/************************ (C) COPYRIGHT STMicroelectronics *****END OF FILE****/ diff --git a/test_dma/Drivers/STM32F7xx_HAL_Driver/Inc/stm32f7xx_hal_cortex.h b/test_dma/Drivers/STM32F7xx_HAL_Driver/Inc/stm32f7xx_hal_cortex.h deleted file mode 100644 index f600c5b..0000000 --- a/test_dma/Drivers/STM32F7xx_HAL_Driver/Inc/stm32f7xx_hal_cortex.h +++ /dev/null @@ -1,406 +0,0 @@ -/** - ****************************************************************************** - * @file stm32f7xx_hal_cortex.h - * @author MCD Application Team - * @brief Header file of CORTEX HAL module. - ****************************************************************************** - * @attention - * - *

© Copyright (c) 2017 STMicroelectronics. - * All rights reserved.

- * - * This software component is licensed by ST under BSD 3-Clause license, - * the "License"; You may not use this file except in compliance with the - * License. You may obtain a copy of the License at: - * opensource.org/licenses/BSD-3-Clause - * - ****************************************************************************** - */ - -/* Define to prevent recursive inclusion -------------------------------------*/ -#ifndef __STM32F7xx_HAL_CORTEX_H -#define __STM32F7xx_HAL_CORTEX_H - -#ifdef __cplusplus - extern "C" { -#endif - -/* Includes ------------------------------------------------------------------*/ -#include "stm32f7xx_hal_def.h" - -/** @addtogroup STM32F7xx_HAL_Driver - * @{ - */ - -/** @addtogroup CORTEX - * @{ - */ -/* Exported types ------------------------------------------------------------*/ -/** @defgroup CORTEX_Exported_Types Cortex Exported Types - * @{ - */ - -#if (__MPU_PRESENT == 1) -/** @defgroup CORTEX_MPU_Region_Initialization_Structure_definition MPU Region Initialization Structure Definition - * @brief MPU Region initialization structure - * @{ - */ -typedef struct -{ - uint8_t Enable; /*!< Specifies the status of the region. - This parameter can be a value of @ref CORTEX_MPU_Region_Enable */ - uint8_t Number; /*!< Specifies the number of the region to protect. - This parameter can be a value of @ref CORTEX_MPU_Region_Number */ - uint32_t BaseAddress; /*!< Specifies the base address of the region to protect. */ - uint8_t Size; /*!< Specifies the size of the region to protect. - This parameter can be a value of @ref CORTEX_MPU_Region_Size */ - uint8_t SubRegionDisable; /*!< Specifies the number of the subregion protection to disable. - This parameter must be a number between Min_Data = 0x00 and Max_Data = 0xFF */ - uint8_t TypeExtField; /*!< Specifies the TEX field level. - This parameter can be a value of @ref CORTEX_MPU_TEX_Levels */ - uint8_t AccessPermission; /*!< Specifies the region access permission type. - This parameter can be a value of @ref CORTEX_MPU_Region_Permission_Attributes */ - uint8_t DisableExec; /*!< Specifies the instruction access status. - This parameter can be a value of @ref CORTEX_MPU_Instruction_Access */ - uint8_t IsShareable; /*!< Specifies the shareability status of the protected region. - This parameter can be a value of @ref CORTEX_MPU_Access_Shareable */ - uint8_t IsCacheable; /*!< Specifies the cacheable status of the region protected. - This parameter can be a value of @ref CORTEX_MPU_Access_Cacheable */ - uint8_t IsBufferable; /*!< Specifies the bufferable status of the protected region. - This parameter can be a value of @ref CORTEX_MPU_Access_Bufferable */ -}MPU_Region_InitTypeDef; -/** - * @} - */ -#endif /* __MPU_PRESENT */ - -/** - * @} - */ - -/* Exported constants --------------------------------------------------------*/ - -/** @defgroup CORTEX_Exported_Constants CORTEX Exported Constants - * @{ - */ - -/** @defgroup CORTEX_Preemption_Priority_Group CORTEX Preemption Priority Group - * @{ - */ -#define NVIC_PRIORITYGROUP_0 ((uint32_t)0x00000007U) /*!< 0 bits for pre-emption priority - 4 bits for subpriority */ -#define NVIC_PRIORITYGROUP_1 ((uint32_t)0x00000006U) /*!< 1 bits for pre-emption priority - 3 bits for subpriority */ -#define NVIC_PRIORITYGROUP_2 ((uint32_t)0x00000005U) /*!< 2 bits for pre-emption priority - 2 bits for subpriority */ -#define NVIC_PRIORITYGROUP_3 ((uint32_t)0x00000004U) /*!< 3 bits for pre-emption priority - 1 bits for subpriority */ -#define NVIC_PRIORITYGROUP_4 ((uint32_t)0x00000003U) /*!< 4 bits for pre-emption priority - 0 bits for subpriority */ -/** - * @} - */ - -/** @defgroup CORTEX_SysTick_clock_source CORTEX _SysTick clock source - * @{ - */ -#define SYSTICK_CLKSOURCE_HCLK_DIV8 ((uint32_t)0x00000000U) -#define SYSTICK_CLKSOURCE_HCLK ((uint32_t)0x00000004U) - -/** - * @} - */ - -#if (__MPU_PRESENT == 1) -/** @defgroup CORTEX_MPU_HFNMI_PRIVDEF_Control MPU HFNMI and PRIVILEGED Access control - * @{ - */ -#define MPU_HFNMI_PRIVDEF_NONE ((uint32_t)0x00000000U) -#define MPU_HARDFAULT_NMI ((uint32_t)0x00000002U) -#define MPU_PRIVILEGED_DEFAULT ((uint32_t)0x00000004U) -#define MPU_HFNMI_PRIVDEF ((uint32_t)0x00000006U) -/** - * @} - */ - -/** @defgroup CORTEX_MPU_Region_Enable CORTEX MPU Region Enable - * @{ - */ -#define MPU_REGION_ENABLE ((uint8_t)0x01U) -#define MPU_REGION_DISABLE ((uint8_t)0x00U) -/** - * @} - */ - -/** @defgroup CORTEX_MPU_Instruction_Access CORTEX MPU Instruction Access - * @{ - */ -#define MPU_INSTRUCTION_ACCESS_ENABLE ((uint8_t)0x00U) -#define MPU_INSTRUCTION_ACCESS_DISABLE ((uint8_t)0x01U) -/** - * @} - */ - -/** @defgroup CORTEX_MPU_Access_Shareable CORTEX MPU Instruction Access Shareable - * @{ - */ -#define MPU_ACCESS_SHAREABLE ((uint8_t)0x01U) -#define MPU_ACCESS_NOT_SHAREABLE ((uint8_t)0x00U) -/** - * @} - */ - -/** @defgroup CORTEX_MPU_Access_Cacheable CORTEX MPU Instruction Access Cacheable - * @{ - */ -#define MPU_ACCESS_CACHEABLE ((uint8_t)0x01U) -#define MPU_ACCESS_NOT_CACHEABLE ((uint8_t)0x00U) -/** - * @} - */ - -/** @defgroup CORTEX_MPU_Access_Bufferable CORTEX MPU Instruction Access Bufferable - * @{ - */ -#define MPU_ACCESS_BUFFERABLE ((uint8_t)0x01U) -#define MPU_ACCESS_NOT_BUFFERABLE ((uint8_t)0x00U) -/** - * @} - */ - -/** @defgroup CORTEX_MPU_TEX_Levels MPU TEX Levels - * @{ - */ -#define MPU_TEX_LEVEL0 ((uint8_t)0x00U) -#define MPU_TEX_LEVEL1 ((uint8_t)0x01U) -#define MPU_TEX_LEVEL2 ((uint8_t)0x02U) -/** - * @} - */ - -/** @defgroup CORTEX_MPU_Region_Size CORTEX MPU Region Size - * @{ - */ -#define MPU_REGION_SIZE_32B ((uint8_t)0x04U) -#define MPU_REGION_SIZE_64B ((uint8_t)0x05U) -#define MPU_REGION_SIZE_128B ((uint8_t)0x06U) -#define MPU_REGION_SIZE_256B ((uint8_t)0x07U) -#define MPU_REGION_SIZE_512B ((uint8_t)0x08U) -#define MPU_REGION_SIZE_1KB ((uint8_t)0x09U) -#define MPU_REGION_SIZE_2KB ((uint8_t)0x0AU) -#define MPU_REGION_SIZE_4KB ((uint8_t)0x0BU) -#define MPU_REGION_SIZE_8KB ((uint8_t)0x0CU) -#define MPU_REGION_SIZE_16KB ((uint8_t)0x0DU) -#define MPU_REGION_SIZE_32KB ((uint8_t)0x0EU) -#define MPU_REGION_SIZE_64KB ((uint8_t)0x0FU) -#define MPU_REGION_SIZE_128KB ((uint8_t)0x10U) -#define MPU_REGION_SIZE_256KB ((uint8_t)0x11U) -#define MPU_REGION_SIZE_512KB ((uint8_t)0x12U) -#define MPU_REGION_SIZE_1MB ((uint8_t)0x13U) -#define MPU_REGION_SIZE_2MB ((uint8_t)0x14U) -#define MPU_REGION_SIZE_4MB ((uint8_t)0x15U) -#define MPU_REGION_SIZE_8MB ((uint8_t)0x16U) -#define MPU_REGION_SIZE_16MB ((uint8_t)0x17U) -#define MPU_REGION_SIZE_32MB ((uint8_t)0x18U) -#define MPU_REGION_SIZE_64MB ((uint8_t)0x19U) -#define MPU_REGION_SIZE_128MB ((uint8_t)0x1AU) -#define MPU_REGION_SIZE_256MB ((uint8_t)0x1BU) -#define MPU_REGION_SIZE_512MB ((uint8_t)0x1CU) -#define MPU_REGION_SIZE_1GB ((uint8_t)0x1DU) -#define MPU_REGION_SIZE_2GB ((uint8_t)0x1EU) -#define MPU_REGION_SIZE_4GB ((uint8_t)0x1FU) -/** - * @} - */ - -/** @defgroup CORTEX_MPU_Region_Permission_Attributes CORTEX MPU Region Permission Attributes - * @{ - */ -#define MPU_REGION_NO_ACCESS ((uint8_t)0x00U) -#define MPU_REGION_PRIV_RW ((uint8_t)0x01U) -#define MPU_REGION_PRIV_RW_URO ((uint8_t)0x02U) -#define MPU_REGION_FULL_ACCESS ((uint8_t)0x03U) -#define MPU_REGION_PRIV_RO ((uint8_t)0x05U) -#define MPU_REGION_PRIV_RO_URO ((uint8_t)0x06U) -/** - * @} - */ - -/** @defgroup CORTEX_MPU_Region_Number CORTEX MPU Region Number - * @{ - */ -#define MPU_REGION_NUMBER0 ((uint8_t)0x00U) -#define MPU_REGION_NUMBER1 ((uint8_t)0x01U) -#define MPU_REGION_NUMBER2 ((uint8_t)0x02U) -#define MPU_REGION_NUMBER3 ((uint8_t)0x03U) -#define MPU_REGION_NUMBER4 ((uint8_t)0x04U) -#define MPU_REGION_NUMBER5 ((uint8_t)0x05U) -#define MPU_REGION_NUMBER6 ((uint8_t)0x06U) -#define MPU_REGION_NUMBER7 ((uint8_t)0x07U) -/** - * @} - */ -#endif /* __MPU_PRESENT */ - -/** - * @} - */ - - -/* Exported Macros -----------------------------------------------------------*/ - -/* Exported functions --------------------------------------------------------*/ -/** @addtogroup CORTEX_Exported_Functions - * @{ - */ - -/** @addtogroup CORTEX_Exported_Functions_Group1 - * @{ - */ -/* Initialization and de-initialization functions *****************************/ -void HAL_NVIC_SetPriorityGrouping(uint32_t PriorityGroup); -void HAL_NVIC_SetPriority(IRQn_Type IRQn, uint32_t PreemptPriority, uint32_t SubPriority); -void HAL_NVIC_EnableIRQ(IRQn_Type IRQn); -void HAL_NVIC_DisableIRQ(IRQn_Type IRQn); -void HAL_NVIC_SystemReset(void); -uint32_t HAL_SYSTICK_Config(uint32_t TicksNumb); -/** - * @} - */ - -/** @addtogroup CORTEX_Exported_Functions_Group2 - * @{ - */ -/* Peripheral Control functions ***********************************************/ -#if (__MPU_PRESENT == 1) -void HAL_MPU_Enable(uint32_t MPU_Control); -void HAL_MPU_Disable(void); -void HAL_MPU_ConfigRegion(MPU_Region_InitTypeDef *MPU_Init); -#endif /* __MPU_PRESENT */ -uint32_t HAL_NVIC_GetPriorityGrouping(void); -void HAL_NVIC_GetPriority(IRQn_Type IRQn, uint32_t PriorityGroup, uint32_t* pPreemptPriority, uint32_t* pSubPriority); -uint32_t HAL_NVIC_GetPendingIRQ(IRQn_Type IRQn); -void HAL_NVIC_SetPendingIRQ(IRQn_Type IRQn); -void HAL_NVIC_ClearPendingIRQ(IRQn_Type IRQn); -uint32_t HAL_NVIC_GetActive(IRQn_Type IRQn); -void HAL_SYSTICK_CLKSourceConfig(uint32_t CLKSource); -void HAL_SYSTICK_IRQHandler(void); -void HAL_SYSTICK_Callback(void); -/** - * @} - */ - -/** - * @} - */ - -/* Private types -------------------------------------------------------------*/ -/* Private variables ---------------------------------------------------------*/ -/* Private constants ---------------------------------------------------------*/ -/* Private macros ------------------------------------------------------------*/ -/** @defgroup CORTEX_Private_Macros CORTEX Private Macros - * @{ - */ -#define IS_NVIC_PRIORITY_GROUP(GROUP) (((GROUP) == NVIC_PRIORITYGROUP_0) || \ - ((GROUP) == NVIC_PRIORITYGROUP_1) || \ - ((GROUP) == NVIC_PRIORITYGROUP_2) || \ - ((GROUP) == NVIC_PRIORITYGROUP_3) || \ - ((GROUP) == NVIC_PRIORITYGROUP_4)) - -#define IS_NVIC_PREEMPTION_PRIORITY(PRIORITY) ((PRIORITY) < 0x10U) - -#define IS_NVIC_SUB_PRIORITY(PRIORITY) ((PRIORITY) < 0x10U) - -#define IS_NVIC_DEVICE_IRQ(IRQ) ((IRQ) >= 0x00) - -#define IS_SYSTICK_CLK_SOURCE(SOURCE) (((SOURCE) == SYSTICK_CLKSOURCE_HCLK) || \ - ((SOURCE) == SYSTICK_CLKSOURCE_HCLK_DIV8)) - -#if (__MPU_PRESENT == 1) -#define IS_MPU_REGION_ENABLE(STATE) (((STATE) == MPU_REGION_ENABLE) || \ - ((STATE) == MPU_REGION_DISABLE)) - -#define IS_MPU_INSTRUCTION_ACCESS(STATE) (((STATE) == MPU_INSTRUCTION_ACCESS_ENABLE) || \ - ((STATE) == MPU_INSTRUCTION_ACCESS_DISABLE)) - -#define IS_MPU_ACCESS_SHAREABLE(STATE) (((STATE) == MPU_ACCESS_SHAREABLE) || \ - ((STATE) == MPU_ACCESS_NOT_SHAREABLE)) - -#define IS_MPU_ACCESS_CACHEABLE(STATE) (((STATE) == MPU_ACCESS_CACHEABLE) || \ - ((STATE) == MPU_ACCESS_NOT_CACHEABLE)) - -#define IS_MPU_ACCESS_BUFFERABLE(STATE) (((STATE) == MPU_ACCESS_BUFFERABLE) || \ - ((STATE) == MPU_ACCESS_NOT_BUFFERABLE)) - -#define IS_MPU_TEX_LEVEL(TYPE) (((TYPE) == MPU_TEX_LEVEL0) || \ - ((TYPE) == MPU_TEX_LEVEL1) || \ - ((TYPE) == MPU_TEX_LEVEL2)) - -#define IS_MPU_REGION_PERMISSION_ATTRIBUTE(TYPE) (((TYPE) == MPU_REGION_NO_ACCESS) || \ - ((TYPE) == MPU_REGION_PRIV_RW) || \ - ((TYPE) == MPU_REGION_PRIV_RW_URO) || \ - ((TYPE) == MPU_REGION_FULL_ACCESS) || \ - ((TYPE) == MPU_REGION_PRIV_RO) || \ - ((TYPE) == MPU_REGION_PRIV_RO_URO)) - -#define IS_MPU_REGION_NUMBER(NUMBER) (((NUMBER) == MPU_REGION_NUMBER0) || \ - ((NUMBER) == MPU_REGION_NUMBER1) || \ - ((NUMBER) == MPU_REGION_NUMBER2) || \ - ((NUMBER) == MPU_REGION_NUMBER3) || \ - ((NUMBER) == MPU_REGION_NUMBER4) || \ - ((NUMBER) == MPU_REGION_NUMBER5) || \ - ((NUMBER) == MPU_REGION_NUMBER6) || \ - ((NUMBER) == MPU_REGION_NUMBER7)) - -#define IS_MPU_REGION_SIZE(SIZE) (((SIZE) == MPU_REGION_SIZE_32B) || \ - ((SIZE) == MPU_REGION_SIZE_64B) || \ - ((SIZE) == MPU_REGION_SIZE_128B) || \ - ((SIZE) == MPU_REGION_SIZE_256B) || \ - ((SIZE) == MPU_REGION_SIZE_512B) || \ - ((SIZE) == MPU_REGION_SIZE_1KB) || \ - ((SIZE) == MPU_REGION_SIZE_2KB) || \ - ((SIZE) == MPU_REGION_SIZE_4KB) || \ - ((SIZE) == MPU_REGION_SIZE_8KB) || \ - ((SIZE) == MPU_REGION_SIZE_16KB) || \ - ((SIZE) == MPU_REGION_SIZE_32KB) || \ - ((SIZE) == MPU_REGION_SIZE_64KB) || \ - ((SIZE) == MPU_REGION_SIZE_128KB) || \ - ((SIZE) == MPU_REGION_SIZE_256KB) || \ - ((SIZE) == MPU_REGION_SIZE_512KB) || \ - ((SIZE) == MPU_REGION_SIZE_1MB) || \ - ((SIZE) == MPU_REGION_SIZE_2MB) || \ - ((SIZE) == MPU_REGION_SIZE_4MB) || \ - ((SIZE) == MPU_REGION_SIZE_8MB) || \ - ((SIZE) == MPU_REGION_SIZE_16MB) || \ - ((SIZE) == MPU_REGION_SIZE_32MB) || \ - ((SIZE) == MPU_REGION_SIZE_64MB) || \ - ((SIZE) == MPU_REGION_SIZE_128MB) || \ - ((SIZE) == MPU_REGION_SIZE_256MB) || \ - ((SIZE) == MPU_REGION_SIZE_512MB) || \ - ((SIZE) == MPU_REGION_SIZE_1GB) || \ - ((SIZE) == MPU_REGION_SIZE_2GB) || \ - ((SIZE) == MPU_REGION_SIZE_4GB)) - -#define IS_MPU_SUB_REGION_DISABLE(SUBREGION) ((SUBREGION) < (uint16_t)0x00FFU) -#endif /* __MPU_PRESENT */ - -/** - * @} - */ - -/** - * @} - */ - -/** - * @} - */ - -#ifdef __cplusplus -} -#endif - -#endif /* __STM32F7xx_HAL_CORTEX_H */ - - -/************************ (C) COPYRIGHT STMicroelectronics *****END OF FILE****/ diff --git a/test_dma/Drivers/STM32F7xx_HAL_Driver/Inc/stm32f7xx_hal_def.h b/test_dma/Drivers/STM32F7xx_HAL_Driver/Inc/stm32f7xx_hal_def.h deleted file mode 100644 index b8c3a86..0000000 --- a/test_dma/Drivers/STM32F7xx_HAL_Driver/Inc/stm32f7xx_hal_def.h +++ /dev/null @@ -1,205 +0,0 @@ -/** - ****************************************************************************** - * @file stm32f7xx_hal_def.h - * @author MCD Application Team - * @brief This file contains HAL common defines, enumeration, macros and - * structures definitions. - ****************************************************************************** - * @attention - * - *

© Copyright (c) 2017 STMicroelectronics. - * All rights reserved.

- * - * This software component is licensed by ST under BSD 3-Clause license, - * the "License"; You may not use this file except in compliance with the - * License. You may obtain a copy of the License at: - * opensource.org/licenses/BSD-3-Clause - * - ****************************************************************************** - */ - -/* Define to prevent recursive inclusion -------------------------------------*/ -#ifndef __STM32F7xx_HAL_DEF -#define __STM32F7xx_HAL_DEF - -#ifdef __cplusplus - extern "C" { -#endif - -/* Includes ------------------------------------------------------------------*/ -#include "stm32f7xx.h" -#include "Legacy/stm32_hal_legacy.h" -#include - -/* Exported types ------------------------------------------------------------*/ - -/** - * @brief HAL Status structures definition - */ -typedef enum -{ - HAL_OK = 0x00U, - HAL_ERROR = 0x01U, - HAL_BUSY = 0x02U, - HAL_TIMEOUT = 0x03U -} HAL_StatusTypeDef; - -/** - * @brief HAL Lock structures definition - */ -typedef enum -{ - HAL_UNLOCKED = 0x00U, - HAL_LOCKED = 0x01U -} HAL_LockTypeDef; - -/* Exported macro ------------------------------------------------------------*/ - -#define UNUSED(X) (void)X /* To avoid gcc/g++ warnings */ - -#define HAL_MAX_DELAY 0xFFFFFFFFU - -#define HAL_IS_BIT_SET(REG, BIT) (((REG) & (BIT)) == (BIT)) -#define HAL_IS_BIT_CLR(REG, BIT) (((REG) & (BIT)) == 0U) - -#define __HAL_LINKDMA(__HANDLE__, __PPP_DMA_FIELD__, __DMA_HANDLE__) \ - do{ \ - (__HANDLE__)->__PPP_DMA_FIELD__ = &(__DMA_HANDLE__); \ - (__DMA_HANDLE__).Parent = (__HANDLE__); \ - } while(0) - -/** @brief Reset the Handle's State field. - * @param __HANDLE__ specifies the Peripheral Handle. - * @note This macro can be used for the following purpose: - * - When the Handle is declared as local variable; before passing it as parameter - * to HAL_PPP_Init() for the first time, it is mandatory to use this macro - * to set to 0 the Handle's "State" field. - * Otherwise, "State" field may have any random value and the first time the function - * HAL_PPP_Init() is called, the low level hardware initialization will be missed - * (i.e. HAL_PPP_MspInit() will not be executed). - * - When there is a need to reconfigure the low level hardware: instead of calling - * HAL_PPP_DeInit() then HAL_PPP_Init(), user can make a call to this macro then HAL_PPP_Init(). - * In this later function, when the Handle's "State" field is set to 0, it will execute the function - * HAL_PPP_MspInit() which will reconfigure the low level hardware. - * @retval None - */ -#define __HAL_RESET_HANDLE_STATE(__HANDLE__) ((__HANDLE__)->State = 0U) - -#if (USE_RTOS == 1U) - /* Reserved for future use */ - #error "USE_RTOS should be 0 in the current HAL release" -#else - #define __HAL_LOCK(__HANDLE__) \ - do{ \ - if((__HANDLE__)->Lock == HAL_LOCKED) \ - { \ - return HAL_BUSY; \ - } \ - else \ - { \ - (__HANDLE__)->Lock = HAL_LOCKED; \ - } \ - }while (0U) - - #define __HAL_UNLOCK(__HANDLE__) \ - do{ \ - (__HANDLE__)->Lock = HAL_UNLOCKED; \ - }while (0U) -#endif /* USE_RTOS */ - -#if defined ( __GNUC__ ) && !defined (__CC_ARM) /* GNU Compiler */ - #ifndef __weak - #define __weak __attribute__((weak)) - #endif /* __weak */ - #ifndef __packed - #define __packed __attribute__((__packed__)) - #endif /* __packed */ -#endif /* __GNUC__ */ - - -/* Macro to get variable aligned on 4-bytes, for __ICCARM__ the directive "#pragma data_alignment=4" must be used instead */ -#if defined ( __GNUC__ ) && !defined (__CC_ARM) /* GNU Compiler */ - #ifndef __ALIGN_END - #define __ALIGN_END __attribute__ ((aligned (4))) - #endif /* __ALIGN_END */ - #ifndef __ALIGN_BEGIN - #define __ALIGN_BEGIN - #endif /* __ALIGN_BEGIN */ -#else - #ifndef __ALIGN_END - #define __ALIGN_END - #endif /* __ALIGN_END */ - #ifndef __ALIGN_BEGIN - #if defined (__CC_ARM) /* ARM Compiler */ - #define __ALIGN_BEGIN __align(4) - #elif defined (__ICCARM__) /* IAR Compiler */ - #define __ALIGN_BEGIN - #endif /* __CC_ARM */ - #endif /* __ALIGN_BEGIN */ -#endif /* __GNUC__ */ - -/* Macro to get variable aligned on 32-bytes,needed for cache maintenance purpose */ -#if defined (__GNUC__) /* GNU Compiler */ - #define ALIGN_32BYTES(buf) buf __attribute__ ((aligned (32))) -#elif defined (__ICCARM__) /* IAR Compiler */ - #define ALIGN_32BYTES(buf) _Pragma("data_alignment=32") buf -#elif defined (__CC_ARM) /* ARM Compiler */ - #define ALIGN_32BYTES(buf) __align(32) buf -#endif - -/** - * @brief __RAM_FUNC definition - */ -#if defined ( __CC_ARM ) -/* ARM Compiler - ------------ - RAM functions are defined using the toolchain options. - Functions that are executed in RAM should reside in a separate source module. - Using the 'Options for File' dialog you can simply change the 'Code / Const' - area of a module to a memory space in physical RAM. - Available memory areas are declared in the 'Target' tab of the 'Options for Target' - dialog. -*/ -#define __RAM_FUNC - -#elif defined ( __ICCARM__ ) -/* ICCARM Compiler - --------------- - RAM functions are defined using a specific toolchain keyword "__ramfunc". -*/ -#define __RAM_FUNC __ramfunc - -#elif defined ( __GNUC__ ) -/* GNU Compiler - ------------ - RAM functions are defined using a specific toolchain attribute - "__attribute__((section(".RamFunc")))". -*/ -#define __RAM_FUNC __attribute__((section(".RamFunc"))) - -#endif - -/** - * @brief __NOINLINE definition - */ -#if defined ( __CC_ARM ) || defined ( __GNUC__ ) -/* ARM & GNUCompiler - ---------------- -*/ -#define __NOINLINE __attribute__ ( (noinline) ) - -#elif defined ( __ICCARM__ ) -/* ICCARM Compiler - --------------- -*/ -#define __NOINLINE _Pragma("optimize = no_inline") - -#endif - -#ifdef __cplusplus -} -#endif - -#endif /* ___STM32F7xx_HAL_DEF */ - -/************************ (C) COPYRIGHT STMicroelectronics *****END OF FILE****/ diff --git a/test_dma/Drivers/STM32F7xx_HAL_Driver/Inc/stm32f7xx_hal_dma.h b/test_dma/Drivers/STM32F7xx_HAL_Driver/Inc/stm32f7xx_hal_dma.h deleted file mode 100644 index 63f752a..0000000 --- a/test_dma/Drivers/STM32F7xx_HAL_Driver/Inc/stm32f7xx_hal_dma.h +++ /dev/null @@ -1,749 +0,0 @@ -/** - ****************************************************************************** - * @file stm32f7xx_hal_dma.h - * @author MCD Application Team - * @brief Header file of DMA HAL module. - ****************************************************************************** - * @attention - * - *

© Copyright (c) 2017 STMicroelectronics. - * All rights reserved.

- * - * This software component is licensed by ST under BSD 3-Clause license, - * the "License"; You may not use this file except in compliance with the - * License. You may obtain a copy of the License at: - * opensource.org/licenses/BSD-3-Clause - * - ****************************************************************************** - */ - -/* Define to prevent recursive inclusion -------------------------------------*/ -#ifndef __STM32F7xx_HAL_DMA_H -#define __STM32F7xx_HAL_DMA_H - -#ifdef __cplusplus - extern "C" { -#endif - -/* Includes ------------------------------------------------------------------*/ -#include "stm32f7xx_hal_def.h" - -/** @addtogroup STM32F7xx_HAL_Driver - * @{ - */ - -/** @addtogroup DMA - * @{ - */ - -/* Exported types ------------------------------------------------------------*/ - -/** @defgroup DMA_Exported_Types DMA Exported Types - * @brief DMA Exported Types - * @{ - */ - -/** - * @brief DMA Configuration Structure definition - */ -typedef struct -{ - uint32_t Channel; /*!< Specifies the channel used for the specified stream. - This parameter can be a value of @ref DMAEx_Channel_selection */ - - uint32_t Direction; /*!< Specifies if the data will be transferred from memory to peripheral, - from memory to memory or from peripheral to memory. - This parameter can be a value of @ref DMA_Data_transfer_direction */ - - uint32_t PeriphInc; /*!< Specifies whether the Peripheral address register should be incremented or not. - This parameter can be a value of @ref DMA_Peripheral_incremented_mode */ - - uint32_t MemInc; /*!< Specifies whether the memory address register should be incremented or not. - This parameter can be a value of @ref DMA_Memory_incremented_mode */ - - uint32_t PeriphDataAlignment; /*!< Specifies the Peripheral data width. - This parameter can be a value of @ref DMA_Peripheral_data_size */ - - uint32_t MemDataAlignment; /*!< Specifies the Memory data width. - This parameter can be a value of @ref DMA_Memory_data_size */ - - uint32_t Mode; /*!< Specifies the operation mode of the DMAy Streamx. - This parameter can be a value of @ref DMA_mode - @note The circular buffer mode cannot be used if the memory-to-memory - data transfer is configured on the selected Stream */ - - uint32_t Priority; /*!< Specifies the software priority for the DMAy Streamx. - This parameter can be a value of @ref DMA_Priority_level */ - - uint32_t FIFOMode; /*!< Specifies if the FIFO mode or Direct mode will be used for the specified stream. - This parameter can be a value of @ref DMA_FIFO_direct_mode - @note The Direct mode (FIFO mode disabled) cannot be used if the - memory-to-memory data transfer is configured on the selected stream */ - - uint32_t FIFOThreshold; /*!< Specifies the FIFO threshold level. - This parameter can be a value of @ref DMA_FIFO_threshold_level */ - - uint32_t MemBurst; /*!< Specifies the Burst transfer configuration for the memory transfers. - It specifies the amount of data to be transferred in a single non interruptible - transaction. - This parameter can be a value of @ref DMA_Memory_burst - @note The burst mode is possible only if the address Increment mode is enabled. */ - - uint32_t PeriphBurst; /*!< Specifies the Burst transfer configuration for the peripheral transfers. - It specifies the amount of data to be transferred in a single non interruptible - transaction. - This parameter can be a value of @ref DMA_Peripheral_burst - @note The burst mode is possible only if the address Increment mode is enabled. */ -}DMA_InitTypeDef; - -/** - * @brief HAL DMA State structures definition - */ -typedef enum -{ - HAL_DMA_STATE_RESET = 0x00U, /*!< DMA not yet initialized or disabled */ - HAL_DMA_STATE_READY = 0x01U, /*!< DMA initialized and ready for use */ - HAL_DMA_STATE_BUSY = 0x02U, /*!< DMA process is ongoing */ - HAL_DMA_STATE_TIMEOUT = 0x03U, /*!< DMA timeout state */ - HAL_DMA_STATE_ERROR = 0x04U, /*!< DMA error state */ - HAL_DMA_STATE_ABORT = 0x05U, /*!< DMA Abort state */ -}HAL_DMA_StateTypeDef; - -/** - * @brief HAL DMA Error Code structure definition - */ -typedef enum -{ - HAL_DMA_FULL_TRANSFER = 0x00U, /*!< Full transfer */ - HAL_DMA_HALF_TRANSFER = 0x01U, /*!< Half Transfer */ -}HAL_DMA_LevelCompleteTypeDef; - -/** - * @brief HAL DMA Error Code structure definition - */ -typedef enum -{ - HAL_DMA_XFER_CPLT_CB_ID = 0x00U, /*!< Full transfer */ - HAL_DMA_XFER_HALFCPLT_CB_ID = 0x01U, /*!< Half Transfer */ - HAL_DMA_XFER_M1CPLT_CB_ID = 0x02U, /*!< M1 Full Transfer */ - HAL_DMA_XFER_M1HALFCPLT_CB_ID = 0x03U, /*!< M1 Half Transfer */ - HAL_DMA_XFER_ERROR_CB_ID = 0x04U, /*!< Error */ - HAL_DMA_XFER_ABORT_CB_ID = 0x05U, /*!< Abort */ - HAL_DMA_XFER_ALL_CB_ID = 0x06U /*!< All */ -}HAL_DMA_CallbackIDTypeDef; - -/** - * @brief DMA handle Structure definition - */ -typedef struct __DMA_HandleTypeDef -{ - DMA_Stream_TypeDef *Instance; /*!< Register base address */ - - DMA_InitTypeDef Init; /*!< DMA communication parameters */ - - HAL_LockTypeDef Lock; /*!< DMA locking object */ - - __IO HAL_DMA_StateTypeDef State; /*!< DMA transfer state */ - - void *Parent; /*!< Parent object state */ - - void (* XferCpltCallback)( struct __DMA_HandleTypeDef * hdma); /*!< DMA transfer complete callback */ - - void (* XferHalfCpltCallback)( struct __DMA_HandleTypeDef * hdma); /*!< DMA Half transfer complete callback */ - - void (* XferM1CpltCallback)( struct __DMA_HandleTypeDef * hdma); /*!< DMA transfer complete Memory1 callback */ - - void (* XferM1HalfCpltCallback)( struct __DMA_HandleTypeDef * hdma); /*!< DMA transfer Half complete Memory1 callback */ - - void (* XferErrorCallback)( struct __DMA_HandleTypeDef * hdma); /*!< DMA transfer error callback */ - - void (* XferAbortCallback)( struct __DMA_HandleTypeDef * hdma); /*!< DMA transfer Abort callback */ - - __IO uint32_t ErrorCode; /*!< DMA Error code */ - - uint32_t StreamBaseAddress; /*!< DMA Stream Base Address */ - - uint32_t StreamIndex; /*!< DMA Stream Index */ - -}DMA_HandleTypeDef; - -/** - * @} - */ - - -/* Exported constants --------------------------------------------------------*/ - -/** @defgroup DMA_Exported_Constants DMA Exported Constants - * @brief DMA Exported constants - * @{ - */ - -/** @defgroup DMA_Error_Code DMA Error Code - * @brief DMA Error Code - * @{ - */ -#define HAL_DMA_ERROR_NONE 0x00000000U /*!< No error */ -#define HAL_DMA_ERROR_TE 0x00000001U /*!< Transfer error */ -#define HAL_DMA_ERROR_FE 0x00000002U /*!< FIFO error */ -#define HAL_DMA_ERROR_DME 0x00000004U /*!< Direct Mode error */ -#define HAL_DMA_ERROR_TIMEOUT 0x00000020U /*!< Timeout error */ -#define HAL_DMA_ERROR_PARAM 0x00000040U /*!< Parameter error */ -#define HAL_DMA_ERROR_NO_XFER 0x00000080U /*!< Abort requested with no Xfer ongoing */ -#define HAL_DMA_ERROR_NOT_SUPPORTED 0x00000100U /*!< Not supported mode */ -/** - * @} - */ - -/** @defgroup DMA_Data_transfer_direction DMA Data transfer direction - * @brief DMA data transfer direction - * @{ - */ -#define DMA_PERIPH_TO_MEMORY 0x00000000U /*!< Peripheral to memory direction */ -#define DMA_MEMORY_TO_PERIPH DMA_SxCR_DIR_0 /*!< Memory to peripheral direction */ -#define DMA_MEMORY_TO_MEMORY DMA_SxCR_DIR_1 /*!< Memory to memory direction */ -/** - * @} - */ - -/** @defgroup DMA_Peripheral_incremented_mode DMA Peripheral incremented mode - * @brief DMA peripheral incremented mode - * @{ - */ -#define DMA_PINC_ENABLE DMA_SxCR_PINC /*!< Peripheral increment mode enable */ -#define DMA_PINC_DISABLE 0x00000000U /*!< Peripheral increment mode disable */ -/** - * @} - */ - -/** @defgroup DMA_Memory_incremented_mode DMA Memory incremented mode - * @brief DMA memory incremented mode - * @{ - */ -#define DMA_MINC_ENABLE DMA_SxCR_MINC /*!< Memory increment mode enable */ -#define DMA_MINC_DISABLE 0x00000000U /*!< Memory increment mode disable */ -/** - * @} - */ - -/** @defgroup DMA_Peripheral_data_size DMA Peripheral data size - * @brief DMA peripheral data size - * @{ - */ -#define DMA_PDATAALIGN_BYTE 0x00000000U /*!< Peripheral data alignment: Byte */ -#define DMA_PDATAALIGN_HALFWORD DMA_SxCR_PSIZE_0 /*!< Peripheral data alignment: HalfWord */ -#define DMA_PDATAALIGN_WORD DMA_SxCR_PSIZE_1 /*!< Peripheral data alignment: Word */ -/** - * @} - */ - -/** @defgroup DMA_Memory_data_size DMA Memory data size - * @brief DMA memory data size - * @{ - */ -#define DMA_MDATAALIGN_BYTE 0x00000000U /*!< Memory data alignment: Byte */ -#define DMA_MDATAALIGN_HALFWORD DMA_SxCR_MSIZE_0 /*!< Memory data alignment: HalfWord */ -#define DMA_MDATAALIGN_WORD DMA_SxCR_MSIZE_1 /*!< Memory data alignment: Word */ -/** - * @} - */ - -/** @defgroup DMA_mode DMA mode - * @brief DMA mode - * @{ - */ -#define DMA_NORMAL 0x00000000U /*!< Normal mode */ -#define DMA_CIRCULAR DMA_SxCR_CIRC /*!< Circular mode */ -#define DMA_PFCTRL DMA_SxCR_PFCTRL /*!< Peripheral flow control mode */ -/** - * @} - */ - -/** @defgroup DMA_Priority_level DMA Priority level - * @brief DMA priority levels - * @{ - */ -#define DMA_PRIORITY_LOW 0x00000000U /*!< Priority level: Low */ -#define DMA_PRIORITY_MEDIUM DMA_SxCR_PL_0 /*!< Priority level: Medium */ -#define DMA_PRIORITY_HIGH DMA_SxCR_PL_1 /*!< Priority level: High */ -#define DMA_PRIORITY_VERY_HIGH DMA_SxCR_PL /*!< Priority level: Very High */ -/** - * @} - */ - -/** @defgroup DMA_FIFO_direct_mode DMA FIFO direct mode - * @brief DMA FIFO direct mode - * @{ - */ -#define DMA_FIFOMODE_DISABLE 0x00000000U /*!< FIFO mode disable */ -#define DMA_FIFOMODE_ENABLE DMA_SxFCR_DMDIS /*!< FIFO mode enable */ -/** - * @} - */ - -/** @defgroup DMA_FIFO_threshold_level DMA FIFO threshold level - * @brief DMA FIFO level - * @{ - */ -#define DMA_FIFO_THRESHOLD_1QUARTERFULL 0x00000000U /*!< FIFO threshold 1 quart full configuration */ -#define DMA_FIFO_THRESHOLD_HALFFULL DMA_SxFCR_FTH_0 /*!< FIFO threshold half full configuration */ -#define DMA_FIFO_THRESHOLD_3QUARTERSFULL DMA_SxFCR_FTH_1 /*!< FIFO threshold 3 quarts full configuration */ -#define DMA_FIFO_THRESHOLD_FULL DMA_SxFCR_FTH /*!< FIFO threshold full configuration */ -/** - * @} - */ - -/** @defgroup DMA_Memory_burst DMA Memory burst - * @brief DMA memory burst - * @{ - */ -#define DMA_MBURST_SINGLE 0x00000000U -#define DMA_MBURST_INC4 DMA_SxCR_MBURST_0 -#define DMA_MBURST_INC8 DMA_SxCR_MBURST_1 -#define DMA_MBURST_INC16 DMA_SxCR_MBURST -/** - * @} - */ - -/** @defgroup DMA_Peripheral_burst DMA Peripheral burst - * @brief DMA peripheral burst - * @{ - */ -#define DMA_PBURST_SINGLE 0x00000000U -#define DMA_PBURST_INC4 DMA_SxCR_PBURST_0 -#define DMA_PBURST_INC8 DMA_SxCR_PBURST_1 -#define DMA_PBURST_INC16 DMA_SxCR_PBURST -/** - * @} - */ - -/** @defgroup DMA_interrupt_enable_definitions DMA interrupt enable definitions - * @brief DMA interrupts definition - * @{ - */ -#define DMA_IT_TC DMA_SxCR_TCIE -#define DMA_IT_HT DMA_SxCR_HTIE -#define DMA_IT_TE DMA_SxCR_TEIE -#define DMA_IT_DME DMA_SxCR_DMEIE -#define DMA_IT_FE 0x00000080U -/** - * @} - */ - -/** @defgroup DMA_flag_definitions DMA flag definitions - * @brief DMA flag definitions - * @{ - */ -#define DMA_FLAG_FEIF0_4 0x00000001U -#define DMA_FLAG_DMEIF0_4 0x00000004U -#define DMA_FLAG_TEIF0_4 0x00000008U -#define DMA_FLAG_HTIF0_4 0x00000010U -#define DMA_FLAG_TCIF0_4 0x00000020U -#define DMA_FLAG_FEIF1_5 0x00000040U -#define DMA_FLAG_DMEIF1_5 0x00000100U -#define DMA_FLAG_TEIF1_5 0x00000200U -#define DMA_FLAG_HTIF1_5 0x00000400U -#define DMA_FLAG_TCIF1_5 0x00000800U -#define DMA_FLAG_FEIF2_6 0x00010000U -#define DMA_FLAG_DMEIF2_6 0x00040000U -#define DMA_FLAG_TEIF2_6 0x00080000U -#define DMA_FLAG_HTIF2_6 0x00100000U -#define DMA_FLAG_TCIF2_6 0x00200000U -#define DMA_FLAG_FEIF3_7 0x00400000U -#define DMA_FLAG_DMEIF3_7 0x01000000U -#define DMA_FLAG_TEIF3_7 0x02000000U -#define DMA_FLAG_HTIF3_7 0x04000000U -#define DMA_FLAG_TCIF3_7 0x08000000U -/** - * @} - */ - -/** - * @} - */ - -/* Exported macro ------------------------------------------------------------*/ - -/** @brief Reset DMA handle state - * @param __HANDLE__ specifies the DMA handle. - * @retval None - */ -#define __HAL_DMA_RESET_HANDLE_STATE(__HANDLE__) ((__HANDLE__)->State = HAL_DMA_STATE_RESET) - -/** - * @brief Return the current DMA Stream FIFO filled level. - * @param __HANDLE__ DMA handle - * @retval The FIFO filling state. - * - DMA_FIFOStatus_Less1QuarterFull: when FIFO is less than 1 quarter-full - * and not empty. - * - DMA_FIFOStatus_1QuarterFull: if more than 1 quarter-full. - * - DMA_FIFOStatus_HalfFull: if more than 1 half-full. - * - DMA_FIFOStatus_3QuartersFull: if more than 3 quarters-full. - * - DMA_FIFOStatus_Empty: when FIFO is empty - * - DMA_FIFOStatus_Full: when FIFO is full - */ -#define __HAL_DMA_GET_FS(__HANDLE__) (((__HANDLE__)->Instance->FCR & (DMA_SxFCR_FS))) - -/** - * @brief Enable the specified DMA Stream. - * @param __HANDLE__ DMA handle - * @retval None - */ -#define __HAL_DMA_ENABLE(__HANDLE__) ((__HANDLE__)->Instance->CR |= DMA_SxCR_EN) - -/** - * @brief Disable the specified DMA Stream. - * @param __HANDLE__ DMA handle - * @retval None - */ -#define __HAL_DMA_DISABLE(__HANDLE__) ((__HANDLE__)->Instance->CR &= ~DMA_SxCR_EN) - -/* Interrupt & Flag management */ - -/** - * @brief Return the current DMA Stream transfer complete flag. - * @param __HANDLE__ DMA handle - * @retval The specified transfer complete flag index. - */ -#define __HAL_DMA_GET_TC_FLAG_INDEX(__HANDLE__) \ -(((uint32_t)((__HANDLE__)->Instance) == ((uint32_t)DMA1_Stream0))? DMA_FLAG_TCIF0_4 :\ - ((uint32_t)((__HANDLE__)->Instance) == ((uint32_t)DMA2_Stream0))? DMA_FLAG_TCIF0_4 :\ - ((uint32_t)((__HANDLE__)->Instance) == ((uint32_t)DMA1_Stream4))? DMA_FLAG_TCIF0_4 :\ - ((uint32_t)((__HANDLE__)->Instance) == ((uint32_t)DMA2_Stream4))? DMA_FLAG_TCIF0_4 :\ - ((uint32_t)((__HANDLE__)->Instance) == ((uint32_t)DMA1_Stream1))? DMA_FLAG_TCIF1_5 :\ - ((uint32_t)((__HANDLE__)->Instance) == ((uint32_t)DMA2_Stream1))? DMA_FLAG_TCIF1_5 :\ - ((uint32_t)((__HANDLE__)->Instance) == ((uint32_t)DMA1_Stream5))? DMA_FLAG_TCIF1_5 :\ - ((uint32_t)((__HANDLE__)->Instance) == ((uint32_t)DMA2_Stream5))? DMA_FLAG_TCIF1_5 :\ - ((uint32_t)((__HANDLE__)->Instance) == ((uint32_t)DMA1_Stream2))? DMA_FLAG_TCIF2_6 :\ - ((uint32_t)((__HANDLE__)->Instance) == ((uint32_t)DMA2_Stream2))? DMA_FLAG_TCIF2_6 :\ - ((uint32_t)((__HANDLE__)->Instance) == ((uint32_t)DMA1_Stream6))? DMA_FLAG_TCIF2_6 :\ - ((uint32_t)((__HANDLE__)->Instance) == ((uint32_t)DMA2_Stream6))? DMA_FLAG_TCIF2_6 :\ - DMA_FLAG_TCIF3_7) - -/** - * @brief Return the current DMA Stream half transfer complete flag. - * @param __HANDLE__ DMA handle - * @retval The specified half transfer complete flag index. - */ -#define __HAL_DMA_GET_HT_FLAG_INDEX(__HANDLE__)\ -(((uint32_t)((__HANDLE__)->Instance) == ((uint32_t)DMA1_Stream0))? DMA_FLAG_HTIF0_4 :\ - ((uint32_t)((__HANDLE__)->Instance) == ((uint32_t)DMA2_Stream0))? DMA_FLAG_HTIF0_4 :\ - ((uint32_t)((__HANDLE__)->Instance) == ((uint32_t)DMA1_Stream4))? DMA_FLAG_HTIF0_4 :\ - ((uint32_t)((__HANDLE__)->Instance) == ((uint32_t)DMA2_Stream4))? DMA_FLAG_HTIF0_4 :\ - ((uint32_t)((__HANDLE__)->Instance) == ((uint32_t)DMA1_Stream1))? DMA_FLAG_HTIF1_5 :\ - ((uint32_t)((__HANDLE__)->Instance) == ((uint32_t)DMA2_Stream1))? DMA_FLAG_HTIF1_5 :\ - ((uint32_t)((__HANDLE__)->Instance) == ((uint32_t)DMA1_Stream5))? DMA_FLAG_HTIF1_5 :\ - ((uint32_t)((__HANDLE__)->Instance) == ((uint32_t)DMA2_Stream5))? DMA_FLAG_HTIF1_5 :\ - ((uint32_t)((__HANDLE__)->Instance) == ((uint32_t)DMA1_Stream2))? DMA_FLAG_HTIF2_6 :\ - ((uint32_t)((__HANDLE__)->Instance) == ((uint32_t)DMA2_Stream2))? DMA_FLAG_HTIF2_6 :\ - ((uint32_t)((__HANDLE__)->Instance) == ((uint32_t)DMA1_Stream6))? DMA_FLAG_HTIF2_6 :\ - ((uint32_t)((__HANDLE__)->Instance) == ((uint32_t)DMA2_Stream6))? DMA_FLAG_HTIF2_6 :\ - DMA_FLAG_HTIF3_7) - -/** - * @brief Return the current DMA Stream transfer error flag. - * @param __HANDLE__ DMA handle - * @retval The specified transfer error flag index. - */ -#define __HAL_DMA_GET_TE_FLAG_INDEX(__HANDLE__)\ -(((uint32_t)((__HANDLE__)->Instance) == ((uint32_t)DMA1_Stream0))? DMA_FLAG_TEIF0_4 :\ - ((uint32_t)((__HANDLE__)->Instance) == ((uint32_t)DMA2_Stream0))? DMA_FLAG_TEIF0_4 :\ - ((uint32_t)((__HANDLE__)->Instance) == ((uint32_t)DMA1_Stream4))? DMA_FLAG_TEIF0_4 :\ - ((uint32_t)((__HANDLE__)->Instance) == ((uint32_t)DMA2_Stream4))? DMA_FLAG_TEIF0_4 :\ - ((uint32_t)((__HANDLE__)->Instance) == ((uint32_t)DMA1_Stream1))? DMA_FLAG_TEIF1_5 :\ - ((uint32_t)((__HANDLE__)->Instance) == ((uint32_t)DMA2_Stream1))? DMA_FLAG_TEIF1_5 :\ - ((uint32_t)((__HANDLE__)->Instance) == ((uint32_t)DMA1_Stream5))? DMA_FLAG_TEIF1_5 :\ - ((uint32_t)((__HANDLE__)->Instance) == ((uint32_t)DMA2_Stream5))? DMA_FLAG_TEIF1_5 :\ - ((uint32_t)((__HANDLE__)->Instance) == ((uint32_t)DMA1_Stream2))? DMA_FLAG_TEIF2_6 :\ - ((uint32_t)((__HANDLE__)->Instance) == ((uint32_t)DMA2_Stream2))? DMA_FLAG_TEIF2_6 :\ - ((uint32_t)((__HANDLE__)->Instance) == ((uint32_t)DMA1_Stream6))? DMA_FLAG_TEIF2_6 :\ - ((uint32_t)((__HANDLE__)->Instance) == ((uint32_t)DMA2_Stream6))? DMA_FLAG_TEIF2_6 :\ - DMA_FLAG_TEIF3_7) - -/** - * @brief Return the current DMA Stream FIFO error flag. - * @param __HANDLE__ DMA handle - * @retval The specified FIFO error flag index. - */ -#define __HAL_DMA_GET_FE_FLAG_INDEX(__HANDLE__)\ -(((uint32_t)((__HANDLE__)->Instance) == ((uint32_t)DMA1_Stream0))? DMA_FLAG_FEIF0_4 :\ - ((uint32_t)((__HANDLE__)->Instance) == ((uint32_t)DMA2_Stream0))? DMA_FLAG_FEIF0_4 :\ - ((uint32_t)((__HANDLE__)->Instance) == ((uint32_t)DMA1_Stream4))? DMA_FLAG_FEIF0_4 :\ - ((uint32_t)((__HANDLE__)->Instance) == ((uint32_t)DMA2_Stream4))? DMA_FLAG_FEIF0_4 :\ - ((uint32_t)((__HANDLE__)->Instance) == ((uint32_t)DMA1_Stream1))? DMA_FLAG_FEIF1_5 :\ - ((uint32_t)((__HANDLE__)->Instance) == ((uint32_t)DMA2_Stream1))? DMA_FLAG_FEIF1_5 :\ - ((uint32_t)((__HANDLE__)->Instance) == ((uint32_t)DMA1_Stream5))? DMA_FLAG_FEIF1_5 :\ - ((uint32_t)((__HANDLE__)->Instance) == ((uint32_t)DMA2_Stream5))? DMA_FLAG_FEIF1_5 :\ - ((uint32_t)((__HANDLE__)->Instance) == ((uint32_t)DMA1_Stream2))? DMA_FLAG_FEIF2_6 :\ - ((uint32_t)((__HANDLE__)->Instance) == ((uint32_t)DMA2_Stream2))? DMA_FLAG_FEIF2_6 :\ - ((uint32_t)((__HANDLE__)->Instance) == ((uint32_t)DMA1_Stream6))? DMA_FLAG_FEIF2_6 :\ - ((uint32_t)((__HANDLE__)->Instance) == ((uint32_t)DMA2_Stream6))? DMA_FLAG_FEIF2_6 :\ - DMA_FLAG_FEIF3_7) - -/** - * @brief Return the current DMA Stream direct mode error flag. - * @param __HANDLE__ DMA handle - * @retval The specified direct mode error flag index. - */ -#define __HAL_DMA_GET_DME_FLAG_INDEX(__HANDLE__)\ -(((uint32_t)((__HANDLE__)->Instance) == ((uint32_t)DMA1_Stream0))? DMA_FLAG_DMEIF0_4 :\ - ((uint32_t)((__HANDLE__)->Instance) == ((uint32_t)DMA2_Stream0))? DMA_FLAG_DMEIF0_4 :\ - ((uint32_t)((__HANDLE__)->Instance) == ((uint32_t)DMA1_Stream4))? DMA_FLAG_DMEIF0_4 :\ - ((uint32_t)((__HANDLE__)->Instance) == ((uint32_t)DMA2_Stream4))? DMA_FLAG_DMEIF0_4 :\ - ((uint32_t)((__HANDLE__)->Instance) == ((uint32_t)DMA1_Stream1))? DMA_FLAG_DMEIF1_5 :\ - ((uint32_t)((__HANDLE__)->Instance) == ((uint32_t)DMA2_Stream1))? DMA_FLAG_DMEIF1_5 :\ - ((uint32_t)((__HANDLE__)->Instance) == ((uint32_t)DMA1_Stream5))? DMA_FLAG_DMEIF1_5 :\ - ((uint32_t)((__HANDLE__)->Instance) == ((uint32_t)DMA2_Stream5))? DMA_FLAG_DMEIF1_5 :\ - ((uint32_t)((__HANDLE__)->Instance) == ((uint32_t)DMA1_Stream2))? DMA_FLAG_DMEIF2_6 :\ - ((uint32_t)((__HANDLE__)->Instance) == ((uint32_t)DMA2_Stream2))? DMA_FLAG_DMEIF2_6 :\ - ((uint32_t)((__HANDLE__)->Instance) == ((uint32_t)DMA1_Stream6))? DMA_FLAG_DMEIF2_6 :\ - ((uint32_t)((__HANDLE__)->Instance) == ((uint32_t)DMA2_Stream6))? DMA_FLAG_DMEIF2_6 :\ - DMA_FLAG_DMEIF3_7) - -/** - * @brief Get the DMA Stream pending flags. - * @param __HANDLE__ DMA handle - * @param __FLAG__ Get the specified flag. - * This parameter can be any combination of the following values: - * @arg DMA_FLAG_TCIFx: Transfer complete flag. - * @arg DMA_FLAG_HTIFx: Half transfer complete flag. - * @arg DMA_FLAG_TEIFx: Transfer error flag. - * @arg DMA_FLAG_DMEIFx: Direct mode error flag. - * @arg DMA_FLAG_FEIFx: FIFO error flag. - * Where x can be 0_4, 1_5, 2_6 or 3_7 to select the DMA Stream flag. - * @retval The state of FLAG (SET or RESET). - */ -#define __HAL_DMA_GET_FLAG(__HANDLE__, __FLAG__)\ -(((uint32_t)((__HANDLE__)->Instance) > (uint32_t)DMA2_Stream3)? (DMA2->HISR & (__FLAG__)) :\ - ((uint32_t)((__HANDLE__)->Instance) > (uint32_t)DMA1_Stream7)? (DMA2->LISR & (__FLAG__)) :\ - ((uint32_t)((__HANDLE__)->Instance) > (uint32_t)DMA1_Stream3)? (DMA1->HISR & (__FLAG__)) : (DMA1->LISR & (__FLAG__))) - -/** - * @brief Clear the DMA Stream pending flags. - * @param __HANDLE__ DMA handle - * @param __FLAG__ specifies the flag to clear. - * This parameter can be any combination of the following values: - * @arg DMA_FLAG_TCIFx: Transfer complete flag. - * @arg DMA_FLAG_HTIFx: Half transfer complete flag. - * @arg DMA_FLAG_TEIFx: Transfer error flag. - * @arg DMA_FLAG_DMEIFx: Direct mode error flag. - * @arg DMA_FLAG_FEIFx: FIFO error flag. - * Where x can be 0_4, 1_5, 2_6 or 3_7 to select the DMA Stream flag. - * @retval None - */ -#define __HAL_DMA_CLEAR_FLAG(__HANDLE__, __FLAG__) \ -(((uint32_t)((__HANDLE__)->Instance) > (uint32_t)DMA2_Stream3)? (DMA2->HIFCR = (__FLAG__)) :\ - ((uint32_t)((__HANDLE__)->Instance) > (uint32_t)DMA1_Stream7)? (DMA2->LIFCR = (__FLAG__)) :\ - ((uint32_t)((__HANDLE__)->Instance) > (uint32_t)DMA1_Stream3)? (DMA1->HIFCR = (__FLAG__)) : (DMA1->LIFCR = (__FLAG__))) - -/** - * @brief Enable the specified DMA Stream interrupts. - * @param __HANDLE__ DMA handle - * @param __INTERRUPT__ specifies the DMA interrupt sources to be enabled or disabled. - * This parameter can be one of the following values: - * @arg DMA_IT_TC: Transfer complete interrupt mask. - * @arg DMA_IT_HT: Half transfer complete interrupt mask. - * @arg DMA_IT_TE: Transfer error interrupt mask. - * @arg DMA_IT_FE: FIFO error interrupt mask. - * @arg DMA_IT_DME: Direct mode error interrupt. - * @retval None - */ -#define __HAL_DMA_ENABLE_IT(__HANDLE__, __INTERRUPT__) (((__INTERRUPT__) != DMA_IT_FE)? \ -((__HANDLE__)->Instance->CR |= (__INTERRUPT__)) : ((__HANDLE__)->Instance->FCR |= (__INTERRUPT__))) - -/** - * @brief Disable the specified DMA Stream interrupts. - * @param __HANDLE__ DMA handle - * @param __INTERRUPT__ specifies the DMA interrupt sources to be enabled or disabled. - * This parameter can be one of the following values: - * @arg DMA_IT_TC: Transfer complete interrupt mask. - * @arg DMA_IT_HT: Half transfer complete interrupt mask. - * @arg DMA_IT_TE: Transfer error interrupt mask. - * @arg DMA_IT_FE: FIFO error interrupt mask. - * @arg DMA_IT_DME: Direct mode error interrupt. - * @retval None - */ -#define __HAL_DMA_DISABLE_IT(__HANDLE__, __INTERRUPT__) (((__INTERRUPT__) != DMA_IT_FE)? \ -((__HANDLE__)->Instance->CR &= ~(__INTERRUPT__)) : ((__HANDLE__)->Instance->FCR &= ~(__INTERRUPT__))) - -/** - * @brief Check whether the specified DMA Stream interrupt is enabled or not. - * @param __HANDLE__ DMA handle - * @param __INTERRUPT__ specifies the DMA interrupt source to check. - * This parameter can be one of the following values: - * @arg DMA_IT_TC: Transfer complete interrupt mask. - * @arg DMA_IT_HT: Half transfer complete interrupt mask. - * @arg DMA_IT_TE: Transfer error interrupt mask. - * @arg DMA_IT_FE: FIFO error interrupt mask. - * @arg DMA_IT_DME: Direct mode error interrupt. - * @retval The state of DMA_IT. - */ -#define __HAL_DMA_GET_IT_SOURCE(__HANDLE__, __INTERRUPT__) (((__INTERRUPT__) != DMA_IT_FE)? \ - ((__HANDLE__)->Instance->CR & (__INTERRUPT__)) : \ - ((__HANDLE__)->Instance->FCR & (__INTERRUPT__))) - -/** - * @brief Writes the number of data units to be transferred on the DMA Stream. - * @param __HANDLE__ DMA handle - * @param __COUNTER__ Number of data units to be transferred (from 0 to 65535) - * Number of data items depends only on the Peripheral data format. - * - * @note If Peripheral data format is Bytes: number of data units is equal - * to total number of bytes to be transferred. - * - * @note If Peripheral data format is Half-Word: number of data units is - * equal to total number of bytes to be transferred / 2. - * - * @note If Peripheral data format is Word: number of data units is equal - * to total number of bytes to be transferred / 4. - * - * @retval The number of remaining data units in the current DMAy Streamx transfer. - */ -#define __HAL_DMA_SET_COUNTER(__HANDLE__, __COUNTER__) ((__HANDLE__)->Instance->NDTR = (uint16_t)(__COUNTER__)) - -/** - * @brief Returns the number of remaining data units in the current DMAy Streamx transfer. - * @param __HANDLE__ DMA handle - * - * @retval The number of remaining data units in the current DMA Stream transfer. - */ -#define __HAL_DMA_GET_COUNTER(__HANDLE__) ((__HANDLE__)->Instance->NDTR) - - -/* Include DMA HAL Extension module */ -#include "stm32f7xx_hal_dma_ex.h" - -/* Exported functions --------------------------------------------------------*/ - -/** @defgroup DMA_Exported_Functions DMA Exported Functions - * @brief DMA Exported functions - * @{ - */ - -/** @defgroup DMA_Exported_Functions_Group1 Initialization and de-initialization functions - * @brief Initialization and de-initialization functions - * @{ - */ -HAL_StatusTypeDef HAL_DMA_Init(DMA_HandleTypeDef *hdma); -HAL_StatusTypeDef HAL_DMA_DeInit(DMA_HandleTypeDef *hdma); -/** - * @} - */ - -/** @defgroup DMA_Exported_Functions_Group2 I/O operation functions - * @brief I/O operation functions - * @{ - */ -HAL_StatusTypeDef HAL_DMA_Start (DMA_HandleTypeDef *hdma, uint32_t SrcAddress, uint32_t DstAddress, uint32_t DataLength); -HAL_StatusTypeDef HAL_DMA_Start_IT(DMA_HandleTypeDef *hdma, uint32_t SrcAddress, uint32_t DstAddress, uint32_t DataLength); -HAL_StatusTypeDef HAL_DMA_Abort(DMA_HandleTypeDef *hdma); -HAL_StatusTypeDef HAL_DMA_Abort_IT(DMA_HandleTypeDef *hdma); -HAL_StatusTypeDef HAL_DMA_PollForTransfer(DMA_HandleTypeDef *hdma, HAL_DMA_LevelCompleteTypeDef CompleteLevel, uint32_t Timeout); -void HAL_DMA_IRQHandler(DMA_HandleTypeDef *hdma); -HAL_StatusTypeDef HAL_DMA_RegisterCallback(DMA_HandleTypeDef *hdma, HAL_DMA_CallbackIDTypeDef CallbackID, void (* pCallback)(DMA_HandleTypeDef *_hdma)); -HAL_StatusTypeDef HAL_DMA_UnRegisterCallback(DMA_HandleTypeDef *hdma, HAL_DMA_CallbackIDTypeDef CallbackID); - -/** - * @} - */ - -/** @defgroup DMA_Exported_Functions_Group3 Peripheral State functions - * @brief Peripheral State functions - * @{ - */ -HAL_DMA_StateTypeDef HAL_DMA_GetState(DMA_HandleTypeDef *hdma); -uint32_t HAL_DMA_GetError(DMA_HandleTypeDef *hdma); -/** - * @} - */ -/** - * @} - */ -/* Private Constants -------------------------------------------------------------*/ -/** @defgroup DMA_Private_Constants DMA Private Constants - * @brief DMA private defines and constants - * @{ - */ -/** - * @} - */ - -/* Private macros ------------------------------------------------------------*/ -/** @defgroup DMA_Private_Macros DMA Private Macros - * @brief DMA private macros - * @{ - */ -#define IS_DMA_DIRECTION(DIRECTION) (((DIRECTION) == DMA_PERIPH_TO_MEMORY ) || \ - ((DIRECTION) == DMA_MEMORY_TO_PERIPH) || \ - ((DIRECTION) == DMA_MEMORY_TO_MEMORY)) - -#define IS_DMA_BUFFER_SIZE(SIZE) (((SIZE) >= 0x01U) && ((SIZE) < 0x10000U)) - -#define IS_DMA_PERIPHERAL_INC_STATE(STATE) (((STATE) == DMA_PINC_ENABLE) || \ - ((STATE) == DMA_PINC_DISABLE)) - -#define IS_DMA_MEMORY_INC_STATE(STATE) (((STATE) == DMA_MINC_ENABLE) || \ - ((STATE) == DMA_MINC_DISABLE)) - -#define IS_DMA_PERIPHERAL_DATA_SIZE(SIZE) (((SIZE) == DMA_PDATAALIGN_BYTE) || \ - ((SIZE) == DMA_PDATAALIGN_HALFWORD) || \ - ((SIZE) == DMA_PDATAALIGN_WORD)) - -#define IS_DMA_MEMORY_DATA_SIZE(SIZE) (((SIZE) == DMA_MDATAALIGN_BYTE) || \ - ((SIZE) == DMA_MDATAALIGN_HALFWORD) || \ - ((SIZE) == DMA_MDATAALIGN_WORD )) - -#define IS_DMA_MODE(MODE) (((MODE) == DMA_NORMAL ) || \ - ((MODE) == DMA_CIRCULAR) || \ - ((MODE) == DMA_PFCTRL)) - -#define IS_DMA_PRIORITY(PRIORITY) (((PRIORITY) == DMA_PRIORITY_LOW ) || \ - ((PRIORITY) == DMA_PRIORITY_MEDIUM) || \ - ((PRIORITY) == DMA_PRIORITY_HIGH) || \ - ((PRIORITY) == DMA_PRIORITY_VERY_HIGH)) - -#define IS_DMA_FIFO_MODE_STATE(STATE) (((STATE) == DMA_FIFOMODE_DISABLE ) || \ - ((STATE) == DMA_FIFOMODE_ENABLE)) - -#define IS_DMA_FIFO_THRESHOLD(THRESHOLD) (((THRESHOLD) == DMA_FIFO_THRESHOLD_1QUARTERFULL ) || \ - ((THRESHOLD) == DMA_FIFO_THRESHOLD_HALFFULL) || \ - ((THRESHOLD) == DMA_FIFO_THRESHOLD_3QUARTERSFULL) || \ - ((THRESHOLD) == DMA_FIFO_THRESHOLD_FULL)) - -#define IS_DMA_MEMORY_BURST(BURST) (((BURST) == DMA_MBURST_SINGLE) || \ - ((BURST) == DMA_MBURST_INC4) || \ - ((BURST) == DMA_MBURST_INC8) || \ - ((BURST) == DMA_MBURST_INC16)) - -#define IS_DMA_PERIPHERAL_BURST(BURST) (((BURST) == DMA_PBURST_SINGLE) || \ - ((BURST) == DMA_PBURST_INC4) || \ - ((BURST) == DMA_PBURST_INC8) || \ - ((BURST) == DMA_PBURST_INC16)) -/** - * @} - */ - -/* Private functions ---------------------------------------------------------*/ -/** @defgroup DMA_Private_Functions DMA Private Functions - * @brief DMA private functions - * @{ - */ -/** - * @} - */ - -/** - * @} - */ - -/** - * @} - */ - -#ifdef __cplusplus -} -#endif - -#endif /* __STM32F7xx_HAL_DMA_H */ - -/************************ (C) COPYRIGHT STMicroelectronics *****END OF FILE****/ diff --git a/test_dma/Drivers/STM32F7xx_HAL_Driver/Inc/stm32f7xx_hal_dma_ex.h b/test_dma/Drivers/STM32F7xx_HAL_Driver/Inc/stm32f7xx_hal_dma_ex.h deleted file mode 100644 index e657a89..0000000 --- a/test_dma/Drivers/STM32F7xx_HAL_Driver/Inc/stm32f7xx_hal_dma_ex.h +++ /dev/null @@ -1,185 +0,0 @@ -/** - ****************************************************************************** - * @file stm32f7xx_hal_dma_ex.h - * @author MCD Application Team - * @brief Header file of DMA HAL extension module. - ****************************************************************************** - * @attention - * - *

© Copyright (c) 2017 STMicroelectronics. - * All rights reserved.

- * - * This software component is licensed by ST under BSD 3-Clause license, - * the "License"; You may not use this file except in compliance with the - * License. You may obtain a copy of the License at: - * opensource.org/licenses/BSD-3-Clause - * - ****************************************************************************** - */ - -/* Define to prevent recursive inclusion -------------------------------------*/ -#ifndef __STM32F7xx_HAL_DMA_EX_H -#define __STM32F7xx_HAL_DMA_EX_H - -#ifdef __cplusplus - extern "C" { -#endif - -/* Includes ------------------------------------------------------------------*/ -#include "stm32f7xx_hal_def.h" - -/** @addtogroup STM32F7xx_HAL_Driver - * @{ - */ - -/** @addtogroup DMAEx - * @{ - */ - -/* Exported types ------------------------------------------------------------*/ -/** @defgroup DMAEx_Exported_Types DMAEx Exported Types - * @brief DMAEx Exported types - * @{ - */ - -/** - * @brief HAL DMA Memory definition - */ -typedef enum -{ - MEMORY0 = 0x00U, /*!< Memory 0 */ - MEMORY1 = 0x01U, /*!< Memory 1 */ - -}HAL_DMA_MemoryTypeDef; - -/** - * @} - */ - -/* Exported constants --------------------------------------------------------*/ - -/** @defgroup DMA_Exported_Constants DMA Exported Constants - * @brief DMA Exported constants - * @{ - */ - -/** @defgroup DMAEx_Channel_selection DMA Channel selection - * @brief DMAEx channel selection - * @{ - */ -#define DMA_CHANNEL_0 0x00000000U /*!< DMA Channel 0 */ -#define DMA_CHANNEL_1 0x02000000U /*!< DMA Channel 1 */ -#define DMA_CHANNEL_2 0x04000000U /*!< DMA Channel 2 */ -#define DMA_CHANNEL_3 0x06000000U /*!< DMA Channel 3 */ -#define DMA_CHANNEL_4 0x08000000U /*!< DMA Channel 4 */ -#define DMA_CHANNEL_5 0x0A000000U /*!< DMA Channel 5 */ -#define DMA_CHANNEL_6 0x0C000000U /*!< DMA Channel 6 */ -#define DMA_CHANNEL_7 0x0E000000U /*!< DMA Channel 7 */ -#if defined (STM32F722xx) || defined (STM32F723xx) || defined (STM32F732xx) || defined (STM32F733xx) ||\ - defined (STM32F765xx) || defined (STM32F767xx) || defined (STM32F769xx) || defined (STM32F777xx) ||\ - defined (STM32F779xx) || defined (STM32F730xx) -#define DMA_CHANNEL_8 0x10000000U /*!< DMA Channel 8 */ -#define DMA_CHANNEL_9 0x12000000U /*!< DMA Channel 9 */ -#define DMA_CHANNEL_10 0x14000000U /*!< DMA Channel 10*/ -#define DMA_CHANNEL_11 0x16000000U /*!< DMA Channel 11*/ -#define DMA_CHANNEL_12 0x18000000U /*!< DMA Channel 12*/ -#define DMA_CHANNEL_13 0x1A000000U /*!< DMA Channel 13*/ -#define DMA_CHANNEL_14 0x1C000000U /*!< DMA Channel 14*/ -#define DMA_CHANNEL_15 0x1E000000U /*!< DMA Channel 15*/ -#endif /* STM32F722xx || STM32F723xx || STM32F732xx || STM32F733xx || STM32F765xx || STM32F767xx || - STM32F769xx || STM32F777xx || STM32F779xx || STM32F730xx */ - -/** - * @} - */ - -/** - * @} - */ - -/* Exported functions --------------------------------------------------------*/ -/** @defgroup DMAEx_Exported_Functions DMAEx Exported Functions - * @brief DMAEx Exported functions - * @{ - */ - -/** @defgroup DMAEx_Exported_Functions_Group1 Extended features functions - * @brief Extended features functions - * @{ - */ - -/* IO operation functions *******************************************************/ -HAL_StatusTypeDef HAL_DMAEx_MultiBufferStart(DMA_HandleTypeDef *hdma, uint32_t SrcAddress, uint32_t DstAddress, uint32_t SecondMemAddress, uint32_t DataLength); -HAL_StatusTypeDef HAL_DMAEx_MultiBufferStart_IT(DMA_HandleTypeDef *hdma, uint32_t SrcAddress, uint32_t DstAddress, uint32_t SecondMemAddress, uint32_t DataLength); -HAL_StatusTypeDef HAL_DMAEx_ChangeMemory(DMA_HandleTypeDef *hdma, uint32_t Address, HAL_DMA_MemoryTypeDef memory); - -/** - * @} - */ -/** - * @} - */ - -/* Private macros ------------------------------------------------------------*/ -/** @defgroup DMAEx_Private_Macros DMA Private Macros - * @brief DMAEx private macros - * @{ - */ -#if defined (STM32F722xx) || defined (STM32F723xx) || defined (STM32F732xx) || defined (STM32F733xx) ||\ - defined (STM32F765xx) || defined (STM32F767xx) || defined (STM32F769xx) || defined (STM32F777xx) ||\ - defined (STM32F779xx) || defined (STM32F730xx) -#define IS_DMA_CHANNEL(CHANNEL) (((CHANNEL) == DMA_CHANNEL_0) || \ - ((CHANNEL) == DMA_CHANNEL_1) || \ - ((CHANNEL) == DMA_CHANNEL_2) || \ - ((CHANNEL) == DMA_CHANNEL_3) || \ - ((CHANNEL) == DMA_CHANNEL_4) || \ - ((CHANNEL) == DMA_CHANNEL_5) || \ - ((CHANNEL) == DMA_CHANNEL_6) || \ - ((CHANNEL) == DMA_CHANNEL_7) || \ - ((CHANNEL) == DMA_CHANNEL_8) || \ - ((CHANNEL) == DMA_CHANNEL_9) || \ - ((CHANNEL) == DMA_CHANNEL_10) || \ - ((CHANNEL) == DMA_CHANNEL_11) || \ - ((CHANNEL) == DMA_CHANNEL_12) || \ - ((CHANNEL) == DMA_CHANNEL_13) || \ - ((CHANNEL) == DMA_CHANNEL_14) || \ - ((CHANNEL) == DMA_CHANNEL_15)) -#else -#define IS_DMA_CHANNEL(CHANNEL) (((CHANNEL) == DMA_CHANNEL_0) || \ - ((CHANNEL) == DMA_CHANNEL_1) || \ - ((CHANNEL) == DMA_CHANNEL_2) || \ - ((CHANNEL) == DMA_CHANNEL_3) || \ - ((CHANNEL) == DMA_CHANNEL_4) || \ - ((CHANNEL) == DMA_CHANNEL_5) || \ - ((CHANNEL) == DMA_CHANNEL_6) || \ - ((CHANNEL) == DMA_CHANNEL_7)) -#endif /* STM32F722xx || STM32F723xx || STM32F732xx || STM32F733xx || STM32F765xx || STM32F767xx || - STM32F769xx || STM32F777xx || STM32F779xx || STM32F730xx*/ -/** - * @} - */ - -/* Private functions ---------------------------------------------------------*/ -/** @defgroup DMAEx_Private_Functions DMAEx Private Functions - * @brief DMAEx Private functions - * @{ - */ -/** - * @} - */ - -/** - * @} - */ - -/** - * @} - */ - -#ifdef __cplusplus -} -#endif - -#endif /* __STM32F7xx_HAL_DMA_H */ - -/************************ (C) COPYRIGHT STMicroelectronics *****END OF FILE****/ diff --git a/test_dma/Drivers/STM32F7xx_HAL_Driver/Inc/stm32f7xx_hal_exti.h b/test_dma/Drivers/STM32F7xx_HAL_Driver/Inc/stm32f7xx_hal_exti.h deleted file mode 100644 index bf82a38..0000000 --- a/test_dma/Drivers/STM32F7xx_HAL_Driver/Inc/stm32f7xx_hal_exti.h +++ /dev/null @@ -1,260 +0,0 @@ -/** - ****************************************************************************** - * @file stm32f7xx_hal_exti.h - * @author MCD Application Team - * @brief Header file of EXTI HAL module. - ****************************************************************************** - * @attention - * - *

© Copyright (c) 2018 STMicroelectronics. - * All rights reserved.

- * - * This software component is licensed by ST under BSD 3-Clause license, - * the "License"; You may not use this file except in compliance with the - * License. You may obtain a copy of the License at: - * opensource.org/licenses/BSD-3-Clause - * - ****************************************************************************** - */ - -/* Define to prevent recursive inclusion -------------------------------------*/ -#ifndef __STM32F7xx_HAL_EXTI_H -#define __STM32F7xx_HAL_EXTI_H - -#ifdef __cplusplus -extern "C" { -#endif - -/* Includes ------------------------------------------------------------------*/ -#include "stm32f7xx_hal_def.h" - -/** @addtogroup STM32F7xx_HAL_Driver - * @{ - */ - -/** @defgroup EXTI EXTI - * @brief EXTI HAL module driver - * @{ - */ - -/* Exported types ------------------------------------------------------------*/ -/** @defgroup EXTI_Exported_Types EXTI Exported Types - * @{ - */ -typedef enum -{ - HAL_EXTI_COMMON_CB_ID = 0x00U, - HAL_EXTI_RISING_CB_ID = 0x01U, - HAL_EXTI_FALLING_CB_ID = 0x02U, -} EXTI_CallbackIDTypeDef; - -/** - * @brief EXTI Handle structure definition - */ -typedef struct -{ - uint32_t Line; /*!< Exti line number */ - void (* PendingCallback)(void); /*!< Exti pending callback */ -} EXTI_HandleTypeDef; - -/** - * @brief EXTI Configuration structure definition - */ -typedef struct -{ - uint32_t Line; /*!< The Exti line to be configured. This parameter - can be a value of @ref EXTI_Line */ - uint32_t Mode; /*!< The Exit Mode to be configured for a core. - This parameter can be a combination of @ref EXTI_Mode */ - uint32_t Trigger; /*!< The Exti Trigger to be configured. This parameter - can be a value of @ref EXTI_Trigger */ -} EXTI_ConfigTypeDef; - -/** - * @} - */ - -/* Exported constants --------------------------------------------------------*/ -/** @defgroup EXTI_Exported_Constants EXTI Exported Constants - * @{ - */ - -/** @defgroup EXTI_Line EXTI Line - * @{ - */ -#define EXTI_LINE_0 EXTI_IMR_IM0 /*!< External interrupt line 0 */ -#define EXTI_LINE_1 EXTI_IMR_IM1 /*!< External interrupt line 1 */ -#define EXTI_LINE_2 EXTI_IMR_IM2 /*!< External interrupt line 2 */ -#define EXTI_LINE_3 EXTI_IMR_IM3 /*!< External interrupt line 3 */ -#define EXTI_LINE_4 EXTI_IMR_IM4 /*!< External interrupt line 4 */ -#define EXTI_LINE_5 EXTI_IMR_IM5 /*!< External interrupt line 5 */ -#define EXTI_LINE_6 EXTI_IMR_IM6 /*!< External interrupt line 6 */ -#define EXTI_LINE_7 EXTI_IMR_IM7 /*!< External interrupt line 7 */ -#define EXTI_LINE_8 EXTI_IMR_IM8 /*!< External interrupt line 8 */ -#define EXTI_LINE_9 EXTI_IMR_IM9 /*!< External interrupt line 9 */ -#define EXTI_LINE_10 EXTI_IMR_IM10 /*!< External interrupt line 10 */ -#define EXTI_LINE_11 EXTI_IMR_IM11 /*!< External interrupt line 11 */ -#define EXTI_LINE_12 EXTI_IMR_IM12 /*!< External interrupt line 12 */ -#define EXTI_LINE_13 EXTI_IMR_IM13 /*!< External interrupt line 13 */ -#define EXTI_LINE_14 EXTI_IMR_IM14 /*!< External interrupt line 14 */ -#define EXTI_LINE_15 EXTI_IMR_IM15 /*!< External interrupt line 15 */ -#if defined(EXTI_IMR_IM16) -#define EXTI_LINE_16 EXTI_IMR_IM16 /*!< External interrupt line 16 Connected to the PVD Output */ -#endif /* EXTI_IMR_IM16 */ -#if defined(EXTI_IMR_IM17) -#define EXTI_LINE_17 EXTI_IMR_IM17 /*!< External interrupt line 17 Connected to the RTC Alarm event */ -#endif /* EXTI_IMR_IM17 */ -#if defined(EXTI_IMR_IM18) -#define EXTI_LINE_18 EXTI_IMR_IM18 /*!< External interrupt line 18 Connected to the USB OTG FS Wakeup from suspend event */ -#endif /* EXTI_IMR_IM18 */ -#if defined(EXTI_IMR_IM19) -#define EXTI_LINE_19 EXTI_IMR_IM19 /*!< External interrupt line 19 Connected to the Ethernet Wakeup event */ -#endif /* EXTI_IMR_IM19 */ -#if defined(EXTI_IMR_IM20) -#define EXTI_LINE_20 EXTI_IMR_IM20 /*!< External interrupt line 20 Connected to the USB OTG HS (configured in FS) Wakeup event */ -#endif /* EXTI_IMR_IM20 */ -#if defined(EXTI_IMR_IM21) -#define EXTI_LINE_21 EXTI_IMR_IM21 /*!< External interrupt line 21 Connected to the RTC Tamper and Time Stamp events */ -#endif /* EXTI_IMR_IM21 */ -#if defined(EXTI_IMR_IM22) -#define EXTI_LINE_22 EXTI_IMR_IM22 /*!< External interrupt line 22 Connected to the RTC Wakeup event */ -#endif /* EXTI_IMR_IM22 */ -#if defined(EXTI_IMR_IM23) -#define EXTI_LINE_23 EXTI_IMR_IM23 /*!< External interrupt line 23 Connected to the LPTIM Wakeup event */ -#endif /* EXTI_IMR_IM23 */ -#if defined(EXTI_IMR_IM24) -#define EXTI_LINE_24 EXTI_IMR_IM24 /*!< External interrupt line 24 Connected to the MDIO Slave global Interrupt Wakeup event */ -#endif /* EXTI_IMR_IM24 */ -/** - * @} - */ - -/** @defgroup EXTI_Mode EXTI Mode - * @{ - */ -#define EXTI_MODE_NONE 0x00000000u -#define EXTI_MODE_INTERRUPT 0x00000001u -#define EXTI_MODE_EVENT 0x00000002u -/** - * @} - */ - -/** @defgroup EXTI_Trigger EXTI Trigger - * @{ - */ -#define EXTI_TRIGGER_NONE 0x00000000u -#define EXTI_TRIGGER_RISING 0x00000001u -#define EXTI_TRIGGER_FALLING 0x00000002u -#define EXTI_TRIGGER_RISING_FALLING (EXTI_TRIGGER_RISING | EXTI_TRIGGER_FALLING) -/** - * @} - */ - -/** - * @} - */ - -/* Exported macro ------------------------------------------------------------*/ -/** @defgroup EXTI_Exported_Macros EXTI Exported Macros - * @{ - */ - -/** - * @} - */ - -/* Private constants --------------------------------------------------------*/ -/** @defgroup EXTI_Private_Constants EXTI Private Constants - * @{ - */ -/** - * @brief EXTI Mask for interrupt & event mode - */ -#define EXTI_MODE_MASK (EXTI_MODE_EVENT | EXTI_MODE_INTERRUPT) - -/** - * @brief EXTI Mask for trigger possibilities - */ -#define EXTI_TRIGGER_MASK (EXTI_TRIGGER_RISING | EXTI_TRIGGER_FALLING | EXTI_TRIGGER_RISING_FALLING) - -/** - * @brief EXTI Line number - */ -#define EXTI_LINE_NB 25u - -/** - * @} - */ - -/* Private macros ------------------------------------------------------------*/ -/** @defgroup EXTI_Private_Macros EXTI Private Macros - * @{ - */ -#define IS_EXTI_LINE(__LINE__) ((((__LINE__) & ~EXTI_IMR_IM) == 0x00U) && (__LINE__)) - -#define IS_EXTI_MODE(__LINE__) ((((__LINE__) & ~EXTI_MODE_MASK) == 0x00U)) - -#define IS_EXTI_TRIGGER(__LINE__) (((__LINE__) & ~EXTI_TRIGGER_MASK) == 0x00U) - -#define IS_EXTI_PENDING_EDGE(__LINE__) (((__LINE__) == EXTI_TRIGGER_FALLING) || \ - ((__LINE__) == EXTI_TRIGGER_RISING) || \ - ((__LINE__) == EXTI_TRIGGER_RISING_FALLING)) - -#define IS_EXTI_GPIO_PIN(__PIN__) ((__PIN__) < 16U) -/** - * @} - */ - -/* Exported functions --------------------------------------------------------*/ -/** @defgroup EXTI_Exported_Functions EXTI Exported Functions - * @brief EXTI Exported Functions - * @{ - */ - -/** @defgroup EXTI_Exported_Functions_Group1 Configuration functions - * @brief Configuration functions - * @{ - */ -/* Configuration functions ****************************************************/ -HAL_StatusTypeDef HAL_EXTI_SetConfigLine(EXTI_HandleTypeDef *hexti, EXTI_ConfigTypeDef *pExtiConfig); -HAL_StatusTypeDef HAL_EXTI_GetConfigLine(EXTI_HandleTypeDef *hexti, EXTI_ConfigTypeDef *pExtiConfig); -HAL_StatusTypeDef HAL_EXTI_ClearConfigLine(EXTI_HandleTypeDef *hexti); -HAL_StatusTypeDef HAL_EXTI_RegisterCallback(EXTI_HandleTypeDef *hexti, EXTI_CallbackIDTypeDef CallbackID, void (*pPendingCbfn)(void)); -HAL_StatusTypeDef HAL_EXTI_GetHandle(EXTI_HandleTypeDef *hexti, uint32_t ExtiLine); -/** - * @} - */ - -/** @defgroup EXTI_Exported_Functions_Group2 IO operation functions - * @brief IO operation functions - * @{ - */ -/* IO operation functions *****************************************************/ -void HAL_EXTI_IRQHandler(EXTI_HandleTypeDef *hexti); -uint32_t HAL_EXTI_GetPending(EXTI_HandleTypeDef *hexti, uint32_t Edge); -void HAL_EXTI_ClearPending(EXTI_HandleTypeDef *hexti, uint32_t Edge); -void HAL_EXTI_GenerateSWI(EXTI_HandleTypeDef *hexti); - -/** - * @} - */ - -/** - * @} - */ - -/** - * @} - */ - -/** - * @} - */ - -#ifdef __cplusplus -} -#endif - -#endif /* __STM32F7xx_HAL_EXTI_H */ - -/************************ (C) COPYRIGHT STMicroelectronics *****END OF FILE****/ diff --git a/test_dma/Drivers/STM32F7xx_HAL_Driver/Inc/stm32f7xx_hal_flash.h b/test_dma/Drivers/STM32F7xx_HAL_Driver/Inc/stm32f7xx_hal_flash.h deleted file mode 100644 index 66a901e..0000000 --- a/test_dma/Drivers/STM32F7xx_HAL_Driver/Inc/stm32f7xx_hal_flash.h +++ /dev/null @@ -1,418 +0,0 @@ -/** - ****************************************************************************** - * @file stm32f7xx_hal_flash.h - * @author MCD Application Team - * @brief Header file of FLASH HAL module. - ****************************************************************************** - * @attention - * - *

© Copyright (c) 2017 STMicroelectronics. - * All rights reserved.

- * - * This software component is licensed by ST under BSD 3-Clause license, - * the "License"; You may not use this file except in compliance with the - * License. You may obtain a copy of the License at: - * opensource.org/licenses/BSD-3-Clause - * - ****************************************************************************** - */ - -/* Define to prevent recursive inclusion -------------------------------------*/ -#ifndef __STM32F7xx_HAL_FLASH_H -#define __STM32F7xx_HAL_FLASH_H - -#ifdef __cplusplus - extern "C" { -#endif - -/* Includes ------------------------------------------------------------------*/ -#include "stm32f7xx_hal_def.h" - -/** @addtogroup STM32F7xx_HAL_Driver - * @{ - */ - -/** @addtogroup FLASH - * @{ - */ - -/* Exported types ------------------------------------------------------------*/ -/** @defgroup FLASH_Exported_Types FLASH Exported Types - * @{ - */ - -/** - * @brief FLASH Procedure structure definition - */ -typedef enum -{ - FLASH_PROC_NONE = 0U, - FLASH_PROC_SECTERASE, - FLASH_PROC_MASSERASE, - FLASH_PROC_PROGRAM -} FLASH_ProcedureTypeDef; - - -/** - * @brief FLASH handle Structure definition - */ -typedef struct -{ - __IO FLASH_ProcedureTypeDef ProcedureOnGoing; /* Internal variable to indicate which procedure is ongoing or not in IT context */ - - __IO uint32_t NbSectorsToErase; /* Internal variable to save the remaining sectors to erase in IT context */ - - __IO uint8_t VoltageForErase; /* Internal variable to provide voltage range selected by user in IT context */ - - __IO uint32_t Sector; /* Internal variable to define the current sector which is erasing */ - - __IO uint32_t Address; /* Internal variable to save address selected for program */ - - HAL_LockTypeDef Lock; /* FLASH locking object */ - - __IO uint32_t ErrorCode; /* FLASH error code */ - -}FLASH_ProcessTypeDef; - -/** - * @} - */ - -/* Exported constants --------------------------------------------------------*/ -/** @defgroup FLASH_Exported_Constants FLASH Exported Constants - * @{ - */ - -/** @defgroup FLASH_Error_Code FLASH Error Code - * @brief FLASH Error Code - * @{ - */ -#define HAL_FLASH_ERROR_NONE ((uint32_t)0x00000000U) /*!< No error */ -#define HAL_FLASH_ERROR_ERS ((uint32_t)0x00000002U) /*!< Programming Sequence error */ -#define HAL_FLASH_ERROR_PGP ((uint32_t)0x00000004U) /*!< Programming Parallelism error */ -#define HAL_FLASH_ERROR_PGA ((uint32_t)0x00000008U) /*!< Programming Alignment error */ -#define HAL_FLASH_ERROR_WRP ((uint32_t)0x00000010U) /*!< Write protection error */ -#define HAL_FLASH_ERROR_OPERATION ((uint32_t)0x00000020U) /*!< Operation Error */ -#define HAL_FLASH_ERROR_RD ((uint32_t)0x00000040U) /*!< Read Protection Error */ -/** - * @} - */ - -/** @defgroup FLASH_Type_Program FLASH Type Program - * @{ - */ -#define FLASH_TYPEPROGRAM_BYTE ((uint32_t)0x00U) /*!< Program byte (8-bit) at a specified address */ -#define FLASH_TYPEPROGRAM_HALFWORD ((uint32_t)0x01U) /*!< Program a half-word (16-bit) at a specified address */ -#define FLASH_TYPEPROGRAM_WORD ((uint32_t)0x02U) /*!< Program a word (32-bit) at a specified address */ -#define FLASH_TYPEPROGRAM_DOUBLEWORD ((uint32_t)0x03U) /*!< Program a double word (64-bit) at a specified address */ -/** - * @} - */ - -/** @defgroup FLASH_Flag_definition FLASH Flag definition - * @brief Flag definition - * @{ - */ -#define FLASH_FLAG_EOP FLASH_SR_EOP /*!< FLASH End of Operation flag */ -#define FLASH_FLAG_OPERR FLASH_SR_OPERR /*!< FLASH operation Error flag */ -#define FLASH_FLAG_WRPERR FLASH_SR_WRPERR /*!< FLASH Write protected error flag */ -#define FLASH_FLAG_PGAERR FLASH_SR_PGAERR /*!< FLASH Programming Alignment error flag */ -#define FLASH_FLAG_PGPERR FLASH_SR_PGPERR /*!< FLASH Programming Parallelism error flag */ -#define FLASH_FLAG_ERSERR FLASH_SR_ERSERR /*!< FLASH Erasing Sequence error flag */ -#define FLASH_FLAG_BSY FLASH_SR_BSY /*!< FLASH Busy flag */ - -#if defined (FLASH_OPTCR2_PCROP) -#define FLASH_FLAG_RDERR FLASH_SR_RDERR /*!< FLASH Read protection error flag */ -#define FLASH_FLAG_ALL_ERRORS (FLASH_FLAG_OPERR | FLASH_FLAG_WRPERR | FLASH_FLAG_PGAERR | \ - FLASH_FLAG_PGPERR | FLASH_FLAG_ERSERR | FLASH_FLAG_RDERR) -#else -#define FLASH_FLAG_ALL_ERRORS (FLASH_FLAG_OPERR | FLASH_FLAG_WRPERR | FLASH_FLAG_PGAERR | \ - FLASH_FLAG_PGPERR | FLASH_FLAG_ERSERR) -#endif /* FLASH_OPTCR2_PCROP */ -/** - * @} - */ - -/** @defgroup FLASH_Interrupt_definition FLASH Interrupt definition - * @brief FLASH Interrupt definition - * @{ - */ -#define FLASH_IT_EOP FLASH_CR_EOPIE /*!< End of FLASH Operation Interrupt source */ -#define FLASH_IT_ERR ((uint32_t)0x02000000U) /*!< Error Interrupt source */ -/** - * @} - */ - -/** @defgroup FLASH_Program_Parallelism FLASH Program Parallelism - * @{ - */ -#define FLASH_PSIZE_BYTE ((uint32_t)0x00000000U) -#define FLASH_PSIZE_HALF_WORD ((uint32_t)FLASH_CR_PSIZE_0) -#define FLASH_PSIZE_WORD ((uint32_t)FLASH_CR_PSIZE_1) -#define FLASH_PSIZE_DOUBLE_WORD ((uint32_t)FLASH_CR_PSIZE) -#define CR_PSIZE_MASK ((uint32_t)0xFFFFFCFFU) -/** - * @} - */ - -/** @defgroup FLASH_Keys FLASH Keys - * @{ - */ -#define FLASH_KEY1 ((uint32_t)0x45670123U) -#define FLASH_KEY2 ((uint32_t)0xCDEF89ABU) -#define FLASH_OPT_KEY1 ((uint32_t)0x08192A3BU) -#define FLASH_OPT_KEY2 ((uint32_t)0x4C5D6E7FU) -/** - * @} - */ - -/** @defgroup FLASH_Sectors FLASH Sectors - * @{ - */ -#if (FLASH_SECTOR_TOTAL == 2) -#define FLASH_SECTOR_0 ((uint32_t)0U) /*!< Sector Number 0 */ -#define FLASH_SECTOR_1 ((uint32_t)1U) /*!< Sector Number 1 */ -#elif (FLASH_SECTOR_TOTAL == 4) -#define FLASH_SECTOR_0 ((uint32_t)0U) /*!< Sector Number 0 */ -#define FLASH_SECTOR_1 ((uint32_t)1U) /*!< Sector Number 1 */ -#define FLASH_SECTOR_2 ((uint32_t)2U) /*!< Sector Number 2 */ -#define FLASH_SECTOR_3 ((uint32_t)3U) /*!< Sector Number 3 */ -#else -#define FLASH_SECTOR_0 ((uint32_t)0U) /*!< Sector Number 0 */ -#define FLASH_SECTOR_1 ((uint32_t)1U) /*!< Sector Number 1 */ -#define FLASH_SECTOR_2 ((uint32_t)2U) /*!< Sector Number 2 */ -#define FLASH_SECTOR_3 ((uint32_t)3U) /*!< Sector Number 3 */ -#define FLASH_SECTOR_4 ((uint32_t)4U) /*!< Sector Number 4 */ -#define FLASH_SECTOR_5 ((uint32_t)5U) /*!< Sector Number 5 */ -#define FLASH_SECTOR_6 ((uint32_t)6U) /*!< Sector Number 6 */ -#define FLASH_SECTOR_7 ((uint32_t)7U) /*!< Sector Number 7 */ -#endif /* FLASH_SECTOR_TOTAL */ -/** - * @} - */ - -/** - * @} - */ - -/* Exported macro ------------------------------------------------------------*/ -/** @defgroup FLASH_Exported_Macros FLASH Exported Macros - * @{ - */ -/** - * @brief Set the FLASH Latency. - * @param __LATENCY__ FLASH Latency - * The value of this parameter depend on device used within the same series - * @retval none - */ -#define __HAL_FLASH_SET_LATENCY(__LATENCY__) \ - MODIFY_REG(FLASH->ACR, FLASH_ACR_LATENCY, (uint32_t)(__LATENCY__)) - -/** - * @brief Get the FLASH Latency. - * @retval FLASH Latency - * The value of this parameter depend on device used within the same series - */ -#define __HAL_FLASH_GET_LATENCY() (READ_BIT((FLASH->ACR), FLASH_ACR_LATENCY)) - -/** - * @brief Enable the FLASH prefetch buffer. - * @retval none - */ -#define __HAL_FLASH_PREFETCH_BUFFER_ENABLE() (FLASH->ACR |= FLASH_ACR_PRFTEN) - -/** - * @brief Disable the FLASH prefetch buffer. - * @retval none - */ -#define __HAL_FLASH_PREFETCH_BUFFER_DISABLE() (FLASH->ACR &= (~FLASH_ACR_PRFTEN)) - -/** - * @brief Enable the FLASH Adaptive Real-Time memory accelerator. - * @note The ART accelerator is available only for flash access on ITCM interface. - * @retval none - */ -#define __HAL_FLASH_ART_ENABLE() SET_BIT(FLASH->ACR, FLASH_ACR_ARTEN) - -/** - * @brief Disable the FLASH Adaptive Real-Time memory accelerator. - * @retval none - */ -#define __HAL_FLASH_ART_DISABLE() CLEAR_BIT(FLASH->ACR, FLASH_ACR_ARTEN) - -/** - * @brief Resets the FLASH Adaptive Real-Time memory accelerator. - * @note This function must be used only when the Adaptive Real-Time memory accelerator - * is disabled. - * @retval None - */ -#define __HAL_FLASH_ART_RESET() (FLASH->ACR |= FLASH_ACR_ARTRST) - -/** - * @brief Enable the specified FLASH interrupt. - * @param __INTERRUPT__ FLASH interrupt - * This parameter can be any combination of the following values: - * @arg FLASH_IT_EOP: End of FLASH Operation Interrupt - * @arg FLASH_IT_ERR: Error Interrupt - * @retval none - */ -#define __HAL_FLASH_ENABLE_IT(__INTERRUPT__) (FLASH->CR |= (__INTERRUPT__)) - -/** - * @brief Disable the specified FLASH interrupt. - * @param __INTERRUPT__ FLASH interrupt - * This parameter can be any combination of the following values: - * @arg FLASH_IT_EOP: End of FLASH Operation Interrupt - * @arg FLASH_IT_ERR: Error Interrupt - * @retval none - */ -#define __HAL_FLASH_DISABLE_IT(__INTERRUPT__) (FLASH->CR &= ~(uint32_t)(__INTERRUPT__)) - -/** - * @brief Get the specified FLASH flag status. - * @param __FLAG__ specifies the FLASH flag to check. - * This parameter can be one of the following values: - * @arg FLASH_FLAG_EOP : FLASH End of Operation flag - * @arg FLASH_FLAG_OPERR : FLASH operation Error flag - * @arg FLASH_FLAG_WRPERR: FLASH Write protected error flag - * @arg FLASH_FLAG_PGAERR: FLASH Programming Alignment error flag - * @arg FLASH_FLAG_PGPERR: FLASH Programming Parallelism error flag - * @arg FLASH_FLAG_ERSERR : FLASH Erasing Sequence error flag - * @arg FLASH_FLAG_BSY : FLASH Busy flag - * @retval The new state of __FLAG__ (SET or RESET). - */ -#define __HAL_FLASH_GET_FLAG(__FLAG__) ((FLASH->SR & (__FLAG__))) - -/** - * @brief Clear the specified FLASH flag. - * @param __FLAG__ specifies the FLASH flags to clear. - * This parameter can be any combination of the following values: - * @arg FLASH_FLAG_EOP : FLASH End of Operation flag - * @arg FLASH_FLAG_OPERR : FLASH operation Error flag - * @arg FLASH_FLAG_WRPERR: FLASH Write protected error flag - * @arg FLASH_FLAG_PGAERR: FLASH Programming Alignment error flag - * @arg FLASH_FLAG_PGPERR: FLASH Programming Parallelism error flag - * @arg FLASH_FLAG_ERSERR : FLASH Erasing Sequence error flag - * @retval none - */ -#define __HAL_FLASH_CLEAR_FLAG(__FLAG__) (FLASH->SR = (__FLAG__)) -/** - * @} - */ - -/* Include FLASH HAL Extension module */ -#include "stm32f7xx_hal_flash_ex.h" - -/* Exported functions --------------------------------------------------------*/ -/** @addtogroup FLASH_Exported_Functions - * @{ - */ -/** @addtogroup FLASH_Exported_Functions_Group1 - * @{ - */ -/* Program operation functions ***********************************************/ -HAL_StatusTypeDef HAL_FLASH_Program(uint32_t TypeProgram, uint32_t Address, uint64_t Data); -HAL_StatusTypeDef HAL_FLASH_Program_IT(uint32_t TypeProgram, uint32_t Address, uint64_t Data); -/* FLASH IRQ handler method */ -void HAL_FLASH_IRQHandler(void); -/* Callbacks in non blocking modes */ -void HAL_FLASH_EndOfOperationCallback(uint32_t ReturnValue); -void HAL_FLASH_OperationErrorCallback(uint32_t ReturnValue); -/** - * @} - */ - -/** @addtogroup FLASH_Exported_Functions_Group2 - * @{ - */ -/* Peripheral Control functions **********************************************/ -HAL_StatusTypeDef HAL_FLASH_Unlock(void); -HAL_StatusTypeDef HAL_FLASH_Lock(void); -HAL_StatusTypeDef HAL_FLASH_OB_Unlock(void); -HAL_StatusTypeDef HAL_FLASH_OB_Lock(void); -/* Option bytes control */ -HAL_StatusTypeDef HAL_FLASH_OB_Launch(void); -/** - * @} - */ - -/** @addtogroup FLASH_Exported_Functions_Group3 - * @{ - */ -/* Peripheral State functions ************************************************/ -uint32_t HAL_FLASH_GetError(void); -HAL_StatusTypeDef FLASH_WaitForLastOperation(uint32_t Timeout); -/** - * @} - */ - -/** - * @} - */ -/* Private types -------------------------------------------------------------*/ -/* Private variables ---------------------------------------------------------*/ -/** @defgroup FLASH_Private_Variables FLASH Private Variables - * @{ - */ - -/** - * @} - */ -/* Private constants ---------------------------------------------------------*/ -/** @defgroup FLASH_Private_Constants FLASH Private Constants - * @{ - */ - -/** - * @brief OPTCR register byte 1 (Bits[15:8]) base address - */ -#define OPTCR_BYTE1_ADDRESS ((uint32_t)0x40023C15) - -/** - * @} - */ - -/* Private macros ------------------------------------------------------------*/ -/** @defgroup FLASH_Private_Macros FLASH Private Macros - * @{ - */ - -/** @defgroup FLASH_IS_FLASH_Definitions FLASH Private macros to check input parameters - * @{ - */ -#define IS_FLASH_TYPEPROGRAM(VALUE)(((VALUE) == FLASH_TYPEPROGRAM_BYTE) || \ - ((VALUE) == FLASH_TYPEPROGRAM_HALFWORD) || \ - ((VALUE) == FLASH_TYPEPROGRAM_WORD) || \ - ((VALUE) == FLASH_TYPEPROGRAM_DOUBLEWORD)) -/** - * @} - */ - -/** - * @} - */ - -/* Private functions ---------------------------------------------------------*/ -/** @defgroup FLASH_Private_Functions FLASH Private Functions - * @{ - */ - -/** - * @} - */ - -/** - * @} - */ - -/** - * @} - */ - -#ifdef __cplusplus -} -#endif - -#endif /* __STM32F7xx_HAL_FLASH_H */ - -/************************ (C) COPYRIGHT STMicroelectronics *****END OF FILE****/ diff --git a/test_dma/Drivers/STM32F7xx_HAL_Driver/Inc/stm32f7xx_hal_flash_ex.h b/test_dma/Drivers/STM32F7xx_HAL_Driver/Inc/stm32f7xx_hal_flash_ex.h deleted file mode 100644 index d417503..0000000 --- a/test_dma/Drivers/STM32F7xx_HAL_Driver/Inc/stm32f7xx_hal_flash_ex.h +++ /dev/null @@ -1,700 +0,0 @@ -/** - ****************************************************************************** - * @file stm32f7xx_hal_flash_ex.h - * @author MCD Application Team - * @brief Header file of FLASH HAL Extension module. - ****************************************************************************** - * @attention - * - *

© Copyright (c) 2017 STMicroelectronics. - * All rights reserved.

- * - * This software component is licensed by ST under BSD 3-Clause license, - * the "License"; You may not use this file except in compliance with the - * License. You may obtain a copy of the License at: - * opensource.org/licenses/BSD-3-Clause - * - ****************************************************************************** - */ - -/* Define to prevent recursive inclusion -------------------------------------*/ -#ifndef __STM32F7xx_HAL_FLASH_EX_H -#define __STM32F7xx_HAL_FLASH_EX_H - -#ifdef __cplusplus - extern "C" { -#endif - -/* Includes ------------------------------------------------------------------*/ -#include "stm32f7xx_hal_def.h" - -/** @addtogroup STM32F7xx_HAL_Driver - * @{ - */ - -/** @addtogroup FLASHEx - * @{ - */ - -/* Exported types ------------------------------------------------------------*/ -/** @defgroup FLASHEx_Exported_Types FLASH Exported Types - * @{ - */ - -/** - * @brief FLASH Erase structure definition - */ -typedef struct -{ - uint32_t TypeErase; /*!< Mass erase or sector Erase. - This parameter can be a value of @ref FLASHEx_Type_Erase */ - -#if defined (FLASH_OPTCR_nDBANK) - uint32_t Banks; /*!< Select banks to erase when Mass erase is enabled. - This parameter must be a value of @ref FLASHEx_Banks */ -#endif /* FLASH_OPTCR_nDBANK */ - - uint32_t Sector; /*!< Initial FLASH sector to erase when Mass erase is disabled - This parameter must be a value of @ref FLASHEx_Sectors */ - - uint32_t NbSectors; /*!< Number of sectors to be erased. - This parameter must be a value between 1 and (max number of sectors - value of Initial sector)*/ - - uint32_t VoltageRange;/*!< The device voltage range which defines the erase parallelism - This parameter must be a value of @ref FLASHEx_Voltage_Range */ - -} FLASH_EraseInitTypeDef; - -/** - * @brief FLASH Option Bytes Program structure definition - */ -typedef struct -{ - uint32_t OptionType; /*!< Option byte to be configured. - This parameter can be a value of @ref FLASHEx_Option_Type */ - - uint32_t WRPState; /*!< Write protection activation or deactivation. - This parameter can be a value of @ref FLASHEx_WRP_State */ - - uint32_t WRPSector; /*!< Specifies the sector(s) to be write protected. - The value of this parameter depend on device used within the same series */ - - uint32_t RDPLevel; /*!< Set the read protection level. - This parameter can be a value of @ref FLASHEx_Option_Bytes_Read_Protection */ - - uint32_t BORLevel; /*!< Set the BOR Level. - This parameter can be a value of @ref FLASHEx_BOR_Reset_Level */ - - uint32_t USERConfig; /*!< Program the FLASH User Option Byte: WWDG_SW / IWDG_SW / RST_STOP / RST_STDBY / - IWDG_FREEZE_STOP / IWDG_FREEZE_SANDBY / nDBANK / nDBOOT. - nDBANK / nDBOOT are only available for STM32F76xxx/STM32F77xxx devices */ - - uint32_t BootAddr0; /*!< Boot base address when Boot pin = 0. - This parameter can be a value of @ref FLASHEx_Boot_Address */ - - uint32_t BootAddr1; /*!< Boot base address when Boot pin = 1. - This parameter can be a value of @ref FLASHEx_Boot_Address */ - -#if defined (FLASH_OPTCR2_PCROP) - uint32_t PCROPSector; /*!< Set the PCROP sector. - This parameter can be a value of @ref FLASHEx_Option_Bytes_PCROP_Sectors */ - - uint32_t PCROPRdp; /*!< Set the PCROP_RDP option. - This parameter can be a value of @ref FLASHEx_Option_Bytes_PCROP_RDP */ -#endif /* FLASH_OPTCR2_PCROP */ - -} FLASH_OBProgramInitTypeDef; - -/** - * @} - */ -/* Exported constants --------------------------------------------------------*/ - -/** @defgroup FLASHEx_Exported_Constants FLASH Exported Constants - * @{ - */ - -/** @defgroup FLASHEx_Type_Erase FLASH Type Erase - * @{ - */ -#define FLASH_TYPEERASE_SECTORS ((uint32_t)0x00U) /*!< Sectors erase only */ -#define FLASH_TYPEERASE_MASSERASE ((uint32_t)0x01U) /*!< Flash Mass erase activation */ -/** - * @} - */ - -/** @defgroup FLASHEx_Voltage_Range FLASH Voltage Range - * @{ - */ -#define FLASH_VOLTAGE_RANGE_1 ((uint32_t)0x00U) /*!< Device operating range: 1.8V to 2.1V */ -#define FLASH_VOLTAGE_RANGE_2 ((uint32_t)0x01U) /*!< Device operating range: 2.1V to 2.7V */ -#define FLASH_VOLTAGE_RANGE_3 ((uint32_t)0x02U) /*!< Device operating range: 2.7V to 3.6V */ -#define FLASH_VOLTAGE_RANGE_4 ((uint32_t)0x03U) /*!< Device operating range: 2.7V to 3.6V + External Vpp */ -/** - * @} - */ - -/** @defgroup FLASHEx_WRP_State FLASH WRP State - * @{ - */ -#define OB_WRPSTATE_DISABLE ((uint32_t)0x00U) /*!< Disable the write protection of the desired bank 1 sectors */ -#define OB_WRPSTATE_ENABLE ((uint32_t)0x01U) /*!< Enable the write protection of the desired bank 1 sectors */ -/** - * @} - */ - -/** @defgroup FLASHEx_Option_Type FLASH Option Type - * @{ - */ -#define OPTIONBYTE_WRP ((uint32_t)0x01U) /*!< WRP option byte configuration */ -#define OPTIONBYTE_RDP ((uint32_t)0x02U) /*!< RDP option byte configuration */ -#define OPTIONBYTE_USER ((uint32_t)0x04U) /*!< USER option byte configuration */ -#define OPTIONBYTE_BOR ((uint32_t)0x08U) /*!< BOR option byte configuration */ -#define OPTIONBYTE_BOOTADDR_0 ((uint32_t)0x10U) /*!< Boot 0 Address configuration */ -#define OPTIONBYTE_BOOTADDR_1 ((uint32_t)0x20U) /*!< Boot 1 Address configuration */ -#if defined (FLASH_OPTCR2_PCROP) -#define OPTIONBYTE_PCROP ((uint32_t)0x40U) /*!< PCROP configuration */ -#define OPTIONBYTE_PCROP_RDP ((uint32_t)0x80U) /*!< PCROP_RDP configuration */ -#endif /* FLASH_OPTCR2_PCROP */ -/** - * @} - */ - -/** @defgroup FLASHEx_Option_Bytes_Read_Protection FLASH Option Bytes Read Protection - * @{ - */ -#define OB_RDP_LEVEL_0 ((uint8_t)0xAAU) -#define OB_RDP_LEVEL_1 ((uint8_t)0x55U) -#define OB_RDP_LEVEL_2 ((uint8_t)0xCCU) /*!< Warning: When enabling read protection level 2 - it s no more possible to go back to level 1 or 0 */ -/** - * @} - */ - -/** @defgroup FLASHEx_Option_Bytes_WWatchdog FLASH Option Bytes WWatchdog - * @{ - */ -#define OB_WWDG_SW ((uint32_t)0x10U) /*!< Software WWDG selected */ -#define OB_WWDG_HW ((uint32_t)0x00U) /*!< Hardware WWDG selected */ -/** - * @} - */ - - -/** @defgroup FLASHEx_Option_Bytes_IWatchdog FLASH Option Bytes IWatchdog - * @{ - */ -#define OB_IWDG_SW ((uint32_t)0x20U) /*!< Software IWDG selected */ -#define OB_IWDG_HW ((uint32_t)0x00U) /*!< Hardware IWDG selected */ -/** - * @} - */ - -/** @defgroup FLASHEx_Option_Bytes_nRST_STOP FLASH Option Bytes nRST_STOP - * @{ - */ -#define OB_STOP_NO_RST ((uint32_t)0x40U) /*!< No reset generated when entering in STOP */ -#define OB_STOP_RST ((uint32_t)0x00U) /*!< Reset generated when entering in STOP */ -/** - * @} - */ - -/** @defgroup FLASHEx_Option_Bytes_nRST_STDBY FLASH Option Bytes nRST_STDBY - * @{ - */ -#define OB_STDBY_NO_RST ((uint32_t)0x80U) /*!< No reset generated when entering in STANDBY */ -#define OB_STDBY_RST ((uint32_t)0x00U) /*!< Reset generated when entering in STANDBY */ -/** - * @} - */ - -/** @defgroup FLASHEx_Option_Bytes_IWDG_FREEZE_STOP FLASH IWDG Counter Freeze in STOP - * @{ - */ -#define OB_IWDG_STOP_FREEZE ((uint32_t)0x00000000U) /*!< Freeze IWDG counter in STOP mode */ -#define OB_IWDG_STOP_ACTIVE ((uint32_t)0x80000000U) /*!< IWDG counter active in STOP mode */ -/** - * @} - */ - -/** @defgroup FLASHEx_Option_Bytes_IWDG_FREEZE_SANDBY FLASH IWDG Counter Freeze in STANDBY - * @{ - */ -#define OB_IWDG_STDBY_FREEZE ((uint32_t)0x00000000U) /*!< Freeze IWDG counter in STANDBY mode */ -#define OB_IWDG_STDBY_ACTIVE ((uint32_t)0x40000000U) /*!< IWDG counter active in STANDBY mode */ -/** - * @} - */ - -/** @defgroup FLASHEx_BOR_Reset_Level FLASH BOR Reset Level - * @{ - */ -#define OB_BOR_LEVEL3 ((uint32_t)0x00U) /*!< Supply voltage ranges from 2.70 to 3.60 V */ -#define OB_BOR_LEVEL2 ((uint32_t)0x04U) /*!< Supply voltage ranges from 2.40 to 2.70 V */ -#define OB_BOR_LEVEL1 ((uint32_t)0x08U) /*!< Supply voltage ranges from 2.10 to 2.40 V */ -#define OB_BOR_OFF ((uint32_t)0x0CU) /*!< Supply voltage ranges from 1.62 to 2.10 V */ -/** - * @} - */ - -#if defined (FLASH_OPTCR_nDBOOT) -/** @defgroup FLASHEx_Option_Bytes_nDBOOT FLASH Option Bytes nDBOOT - * @{ - */ -#define OB_DUAL_BOOT_DISABLE ((uint32_t)0x10000000U) /* !< Dual Boot disable. Boot according to boot address option */ -#define OB_DUAL_BOOT_ENABLE ((uint32_t)0x00000000U) /* !< Dual Boot enable. Boot always from system memory if boot address in flash - (Dual bank Boot mode), or RAM if Boot address option in RAM */ -/** - * @} - */ -#endif /* FLASH_OPTCR_nDBOOT */ - -#if defined (FLASH_OPTCR_nDBANK) -/** @defgroup FLASHEx_Option_Bytes_nDBank FLASH Single Bank or Dual Bank - * @{ - */ -#define OB_NDBANK_SINGLE_BANK ((uint32_t)0x20000000U) /*!< NDBANK bit is set : Single Bank mode */ -#define OB_NDBANK_DUAL_BANK ((uint32_t)0x00000000U) /*!< NDBANK bit is reset : Dual Bank mode */ -/** - * @} - */ -#endif /* FLASH_OPTCR_nDBANK */ - -/** @defgroup FLASHEx_Boot_Address FLASH Boot Address - * @{ - */ -#define OB_BOOTADDR_ITCM_RAM ((uint32_t)0x0000U) /*!< Boot from ITCM RAM (0x00000000) */ -#define OB_BOOTADDR_SYSTEM ((uint32_t)0x0040U) /*!< Boot from System memory bootloader (0x00100000) */ -#define OB_BOOTADDR_ITCM_FLASH ((uint32_t)0x0080U) /*!< Boot from Flash on ITCM interface (0x00200000) */ -#define OB_BOOTADDR_AXIM_FLASH ((uint32_t)0x2000U) /*!< Boot from Flash on AXIM interface (0x08000000) */ -#define OB_BOOTADDR_DTCM_RAM ((uint32_t)0x8000U) /*!< Boot from DTCM RAM (0x20000000) */ -#define OB_BOOTADDR_SRAM1 ((uint32_t)0x8004U) /*!< Boot from SRAM1 (0x20010000) */ -#if (SRAM2_BASE == 0x2003C000U) -#define OB_BOOTADDR_SRAM2 ((uint32_t)0x800FU) /*!< Boot from SRAM2 (0x2003C000) */ -#else -#define OB_BOOTADDR_SRAM2 ((uint32_t)0x8013U) /*!< Boot from SRAM2 (0x2004C000) */ -#endif /* SRAM2_BASE == 0x2003C000U */ -/** - * @} - */ - -/** @defgroup FLASH_Latency FLASH Latency - * @{ - */ -#define FLASH_LATENCY_0 FLASH_ACR_LATENCY_0WS /*!< FLASH Zero Latency cycle */ -#define FLASH_LATENCY_1 FLASH_ACR_LATENCY_1WS /*!< FLASH One Latency cycle */ -#define FLASH_LATENCY_2 FLASH_ACR_LATENCY_2WS /*!< FLASH Two Latency cycles */ -#define FLASH_LATENCY_3 FLASH_ACR_LATENCY_3WS /*!< FLASH Three Latency cycles */ -#define FLASH_LATENCY_4 FLASH_ACR_LATENCY_4WS /*!< FLASH Four Latency cycles */ -#define FLASH_LATENCY_5 FLASH_ACR_LATENCY_5WS /*!< FLASH Five Latency cycles */ -#define FLASH_LATENCY_6 FLASH_ACR_LATENCY_6WS /*!< FLASH Six Latency cycles */ -#define FLASH_LATENCY_7 FLASH_ACR_LATENCY_7WS /*!< FLASH Seven Latency cycles */ -#define FLASH_LATENCY_8 FLASH_ACR_LATENCY_8WS /*!< FLASH Eight Latency cycles */ -#define FLASH_LATENCY_9 FLASH_ACR_LATENCY_9WS /*!< FLASH Nine Latency cycles */ -#define FLASH_LATENCY_10 FLASH_ACR_LATENCY_10WS /*!< FLASH Ten Latency cycles */ -#define FLASH_LATENCY_11 FLASH_ACR_LATENCY_11WS /*!< FLASH Eleven Latency cycles */ -#define FLASH_LATENCY_12 FLASH_ACR_LATENCY_12WS /*!< FLASH Twelve Latency cycles */ -#define FLASH_LATENCY_13 FLASH_ACR_LATENCY_13WS /*!< FLASH Thirteen Latency cycles */ -#define FLASH_LATENCY_14 FLASH_ACR_LATENCY_14WS /*!< FLASH Fourteen Latency cycles */ -#define FLASH_LATENCY_15 FLASH_ACR_LATENCY_15WS /*!< FLASH Fifteen Latency cycles */ -/** - * @} - */ - -#if defined (FLASH_OPTCR_nDBANK) -/** @defgroup FLASHEx_Banks FLASH Banks - * @{ - */ -#define FLASH_BANK_1 ((uint32_t)0x01U) /*!< Bank 1 */ -#define FLASH_BANK_2 ((uint32_t)0x02U) /*!< Bank 2 */ -#define FLASH_BANK_BOTH ((uint32_t)(FLASH_BANK_1 | FLASH_BANK_2)) /*!< Bank1 and Bank2 */ -/** - * @} - */ -#endif /* FLASH_OPTCR_nDBANK */ - -/** @defgroup FLASHEx_MassErase_bit FLASH Mass Erase bit - * @{ - */ -#if defined (FLASH_OPTCR_nDBANK) -#define FLASH_MER_BIT (FLASH_CR_MER1 | FLASH_CR_MER2) /*!< 2 MER bits */ -#else -#define FLASH_MER_BIT (FLASH_CR_MER) /*!< only 1 MER bit */ -#endif /* FLASH_OPTCR_nDBANK */ -/** - * @} - */ - -/** @defgroup FLASHEx_Sectors FLASH Sectors - * @{ - */ -#if (FLASH_SECTOR_TOTAL == 24) -#define FLASH_SECTOR_8 ((uint32_t)8U) /*!< Sector Number 8 */ -#define FLASH_SECTOR_9 ((uint32_t)9U) /*!< Sector Number 9 */ -#define FLASH_SECTOR_10 ((uint32_t)10U) /*!< Sector Number 10 */ -#define FLASH_SECTOR_11 ((uint32_t)11U) /*!< Sector Number 11 */ -#define FLASH_SECTOR_12 ((uint32_t)12U) /*!< Sector Number 12 */ -#define FLASH_SECTOR_13 ((uint32_t)13U) /*!< Sector Number 13 */ -#define FLASH_SECTOR_14 ((uint32_t)14U) /*!< Sector Number 14 */ -#define FLASH_SECTOR_15 ((uint32_t)15U) /*!< Sector Number 15 */ -#define FLASH_SECTOR_16 ((uint32_t)16U) /*!< Sector Number 16 */ -#define FLASH_SECTOR_17 ((uint32_t)17U) /*!< Sector Number 17 */ -#define FLASH_SECTOR_18 ((uint32_t)18U) /*!< Sector Number 18 */ -#define FLASH_SECTOR_19 ((uint32_t)19U) /*!< Sector Number 19 */ -#define FLASH_SECTOR_20 ((uint32_t)20U) /*!< Sector Number 20 */ -#define FLASH_SECTOR_21 ((uint32_t)21U) /*!< Sector Number 21 */ -#define FLASH_SECTOR_22 ((uint32_t)22U) /*!< Sector Number 22 */ -#define FLASH_SECTOR_23 ((uint32_t)23U) /*!< Sector Number 23 */ -#endif /* FLASH_SECTOR_TOTAL == 24 */ -/** - * @} - */ - -#if (FLASH_SECTOR_TOTAL == 24) -/** @defgroup FLASHEx_Option_Bytes_Write_Protection FLASH Option Bytes Write Protection - * @note For Single Bank mode, use OB_WRP_SECTOR_x defines: In fact, in FLASH_OPTCR register, - * nWRP[11:0] bits contain the value of the write-protection option bytes for sectors 0 to 11. - * For Dual Bank mode, use OB_WRP_DB_SECTOR_x defines: In fact, in FLASH_OPTCR register, - * nWRP[11:0] bits are divided on two groups, one group dedicated for bank 1 and - * a second one dedicated for bank 2 (nWRP[i] activates Write protection on sector 2*i and 2*i+1). - * This behavior is applicable only for STM32F76xxx / STM32F77xxx devices. - * @{ - */ -/* Single Bank Sectors */ -#define OB_WRP_SECTOR_0 ((uint32_t)0x00010000U) /*!< Write protection of Single Bank Sector0 */ -#define OB_WRP_SECTOR_1 ((uint32_t)0x00020000U) /*!< Write protection of Single Bank Sector1 */ -#define OB_WRP_SECTOR_2 ((uint32_t)0x00040000U) /*!< Write protection of Single Bank Sector2 */ -#define OB_WRP_SECTOR_3 ((uint32_t)0x00080000U) /*!< Write protection of Single Bank Sector3 */ -#define OB_WRP_SECTOR_4 ((uint32_t)0x00100000U) /*!< Write protection of Single Bank Sector4 */ -#define OB_WRP_SECTOR_5 ((uint32_t)0x00200000U) /*!< Write protection of Single Bank Sector5 */ -#define OB_WRP_SECTOR_6 ((uint32_t)0x00400000U) /*!< Write protection of Single Bank Sector6 */ -#define OB_WRP_SECTOR_7 ((uint32_t)0x00800000U) /*!< Write protection of Single Bank Sector7 */ -#define OB_WRP_SECTOR_8 ((uint32_t)0x01000000U) /*!< Write protection of Single Bank Sector8 */ -#define OB_WRP_SECTOR_9 ((uint32_t)0x02000000U) /*!< Write protection of Single Bank Sector9 */ -#define OB_WRP_SECTOR_10 ((uint32_t)0x04000000U) /*!< Write protection of Single Bank Sector10 */ -#define OB_WRP_SECTOR_11 ((uint32_t)0x08000000U) /*!< Write protection of Single Bank Sector11 */ -#define OB_WRP_SECTOR_All ((uint32_t)0x0FFF0000U) /*!< Write protection of all Sectors for Single Bank Flash */ - -/* Dual Bank Sectors */ -#define OB_WRP_DB_SECTOR_0 ((uint32_t)0x00010000U) /*!< Write protection of Dual Bank Sector0 */ -#define OB_WRP_DB_SECTOR_1 ((uint32_t)0x00010000U) /*!< Write protection of Dual Bank Sector1 */ -#define OB_WRP_DB_SECTOR_2 ((uint32_t)0x00020000U) /*!< Write protection of Dual Bank Sector2 */ -#define OB_WRP_DB_SECTOR_3 ((uint32_t)0x00020000U) /*!< Write protection of Dual Bank Sector3 */ -#define OB_WRP_DB_SECTOR_4 ((uint32_t)0x00040000U) /*!< Write protection of Dual Bank Sector4 */ -#define OB_WRP_DB_SECTOR_5 ((uint32_t)0x00040000U) /*!< Write protection of Dual Bank Sector5 */ -#define OB_WRP_DB_SECTOR_6 ((uint32_t)0x00080000U) /*!< Write protection of Dual Bank Sector6 */ -#define OB_WRP_DB_SECTOR_7 ((uint32_t)0x00080000U) /*!< Write protection of Dual Bank Sector7 */ -#define OB_WRP_DB_SECTOR_8 ((uint32_t)0x00100000U) /*!< Write protection of Dual Bank Sector8 */ -#define OB_WRP_DB_SECTOR_9 ((uint32_t)0x00100000U) /*!< Write protection of Dual Bank Sector9 */ -#define OB_WRP_DB_SECTOR_10 ((uint32_t)0x00200000U) /*!< Write protection of Dual Bank Sector10 */ -#define OB_WRP_DB_SECTOR_11 ((uint32_t)0x00200000U) /*!< Write protection of Dual Bank Sector11 */ -#define OB_WRP_DB_SECTOR_12 ((uint32_t)0x00400000U) /*!< Write protection of Dual Bank Sector12 */ -#define OB_WRP_DB_SECTOR_13 ((uint32_t)0x00400000U) /*!< Write protection of Dual Bank Sector13 */ -#define OB_WRP_DB_SECTOR_14 ((uint32_t)0x00800000U) /*!< Write protection of Dual Bank Sector14 */ -#define OB_WRP_DB_SECTOR_15 ((uint32_t)0x00800000U) /*!< Write protection of Dual Bank Sector15 */ -#define OB_WRP_DB_SECTOR_16 ((uint32_t)0x01000000U) /*!< Write protection of Dual Bank Sector16 */ -#define OB_WRP_DB_SECTOR_17 ((uint32_t)0x01000000U) /*!< Write protection of Dual Bank Sector17 */ -#define OB_WRP_DB_SECTOR_18 ((uint32_t)0x02000000U) /*!< Write protection of Dual Bank Sector18 */ -#define OB_WRP_DB_SECTOR_19 ((uint32_t)0x02000000U) /*!< Write protection of Dual Bank Sector19 */ -#define OB_WRP_DB_SECTOR_20 ((uint32_t)0x04000000U) /*!< Write protection of Dual Bank Sector20 */ -#define OB_WRP_DB_SECTOR_21 ((uint32_t)0x04000000U) /*!< Write protection of Dual Bank Sector21 */ -#define OB_WRP_DB_SECTOR_22 ((uint32_t)0x08000000U) /*!< Write protection of Dual Bank Sector22 */ -#define OB_WRP_DB_SECTOR_23 ((uint32_t)0x08000000U) /*!< Write protection of Dual Bank Sector23 */ -#define OB_WRP_DB_SECTOR_All ((uint32_t)0x0FFF0000U) /*!< Write protection of all Sectors for Dual Bank Flash */ -/** - * @} - */ -#endif /* FLASH_SECTOR_TOTAL == 24 */ - -#if (FLASH_SECTOR_TOTAL == 8) -/** @defgroup FLASHEx_Option_Bytes_Write_Protection FLASH Option Bytes Write Protection - * @{ - */ -#define OB_WRP_SECTOR_0 ((uint32_t)0x00010000U) /*!< Write protection of Sector0 */ -#define OB_WRP_SECTOR_1 ((uint32_t)0x00020000U) /*!< Write protection of Sector1 */ -#define OB_WRP_SECTOR_2 ((uint32_t)0x00040000U) /*!< Write protection of Sector2 */ -#define OB_WRP_SECTOR_3 ((uint32_t)0x00080000U) /*!< Write protection of Sector3 */ -#define OB_WRP_SECTOR_4 ((uint32_t)0x00100000U) /*!< Write protection of Sector4 */ -#define OB_WRP_SECTOR_5 ((uint32_t)0x00200000U) /*!< Write protection of Sector5 */ -#define OB_WRP_SECTOR_6 ((uint32_t)0x00400000U) /*!< Write protection of Sector6 */ -#define OB_WRP_SECTOR_7 ((uint32_t)0x00800000U) /*!< Write protection of Sector7 */ -#define OB_WRP_SECTOR_All ((uint32_t)0x00FF0000U) /*!< Write protection of all Sectors */ -/** - * @} - */ -#endif /* FLASH_SECTOR_TOTAL == 8 */ - -#if (FLASH_SECTOR_TOTAL == 4) -/** @defgroup FLASHEx_Option_Bytes_Write_Protection FLASH Option Bytes Write Protection - * @{ - */ -#define OB_WRP_SECTOR_0 ((uint32_t)0x00010000U) /*!< Write protection of Sector0 */ -#define OB_WRP_SECTOR_1 ((uint32_t)0x00020000U) /*!< Write protection of Sector1 */ -#define OB_WRP_SECTOR_2 ((uint32_t)0x00040000U) /*!< Write protection of Sector2 */ -#define OB_WRP_SECTOR_3 ((uint32_t)0x00080000U) /*!< Write protection of Sector3 */ -#define OB_WRP_SECTOR_All ((uint32_t)0x000F0000U) /*!< Write protection of all Sectors */ -/** - * @} - */ -#endif /* FLASH_SECTOR_TOTAL == 4 */ - -#if (FLASH_SECTOR_TOTAL == 2) -/** @defgroup FLASHEx_Option_Bytes_Write_Protection FLASH Option Bytes Write Protection - * @{ - */ -#define OB_WRP_SECTOR_0 ((uint32_t)0x00010000U) /*!< Write protection of Sector0 */ -#define OB_WRP_SECTOR_1 ((uint32_t)0x00020000U) /*!< Write protection of Sector1 */ -#define OB_WRP_SECTOR_All ((uint32_t)0x00030000U) /*!< Write protection of all Sectors */ -/** - * @} - */ -#endif /* FLASH_SECTOR_TOTAL == 2 */ - -#if defined (FLASH_OPTCR2_PCROP) -#if (FLASH_SECTOR_TOTAL == 8) -/** @defgroup FLASHEx_Option_Bytes_PCROP_Sectors FLASH Option Bytes PCROP Sectors - * @{ - */ -#define OB_PCROP_SECTOR_0 ((uint32_t)0x00000001U) /*!< PC Readout protection of Sector0 */ -#define OB_PCROP_SECTOR_1 ((uint32_t)0x00000002U) /*!< PC Readout protection of Sector1 */ -#define OB_PCROP_SECTOR_2 ((uint32_t)0x00000004U) /*!< PC Readout protection of Sector2 */ -#define OB_PCROP_SECTOR_3 ((uint32_t)0x00000008U) /*!< PC Readout protection of Sector3 */ -#define OB_PCROP_SECTOR_4 ((uint32_t)0x00000010U) /*!< PC Readout protection of Sector4 */ -#define OB_PCROP_SECTOR_5 ((uint32_t)0x00000020U) /*!< PC Readout protection of Sector5 */ -#define OB_PCROP_SECTOR_6 ((uint32_t)0x00000040U) /*!< PC Readout protection of Sector6 */ -#define OB_PCROP_SECTOR_7 ((uint32_t)0x00000080U) /*!< PC Readout protection of Sector7 */ -#define OB_PCROP_SECTOR_All ((uint32_t)0x000000FFU) /*!< PC Readout protection of all Sectors */ -/** - * @} - */ -#endif /* FLASH_SECTOR_TOTAL == 8 */ - -#if (FLASH_SECTOR_TOTAL == 4) -/** @defgroup FLASHEx_Option_Bytes_PCROP_Sectors FLASH Option Bytes PCROP Sectors - * @{ - */ -#define OB_PCROP_SECTOR_0 ((uint32_t)0x00000001U) /*!< PC Readout protection of Sector0 */ -#define OB_PCROP_SECTOR_1 ((uint32_t)0x00000002U) /*!< PC Readout protection of Sector1 */ -#define OB_PCROP_SECTOR_2 ((uint32_t)0x00000004U) /*!< PC Readout protection of Sector2 */ -#define OB_PCROP_SECTOR_3 ((uint32_t)0x00000008U) /*!< PC Readout protection of Sector3 */ -#define OB_PCROP_SECTOR_All ((uint32_t)0x0000000FU) /*!< PC Readout protection of all Sectors */ -/** - * @} - */ -#endif /* FLASH_SECTOR_TOTAL == 4 */ - -/** @defgroup FLASHEx_Option_Bytes_PCROP_RDP FLASH Option Bytes PCROP_RDP Bit - * @{ - */ -#define OB_PCROP_RDP_ENABLE ((uint32_t)0x80000000U) /*!< PCROP_RDP Enable */ -#define OB_PCROP_RDP_DISABLE ((uint32_t)0x00000000U) /*!< PCROP_RDP Disable */ -/** - * @} - */ -#endif /* FLASH_OPTCR2_PCROP */ - -/** - * @} - */ - -/* Exported macro ------------------------------------------------------------*/ -/** @defgroup FLASH_Exported_Macros FLASH Exported Macros - * @{ - */ -/** - * @brief Calculate the FLASH Boot Base Adress (BOOT_ADD0 or BOOT_ADD1) - * @note Returned value BOOT_ADDx[15:0] corresponds to boot address [29:14]. - * @param __ADDRESS__ FLASH Boot Address (in the range 0x0000 0000 to 0x2004 FFFF with a granularity of 16KB) - * @retval The FLASH Boot Base Adress - */ -#define __HAL_FLASH_CALC_BOOT_BASE_ADR(__ADDRESS__) ((__ADDRESS__) >> 14) - /** - * @} - */ - -/* Exported functions --------------------------------------------------------*/ -/** @addtogroup FLASHEx_Exported_Functions - * @{ - */ - -/** @addtogroup FLASHEx_Exported_Functions_Group1 - * @{ - */ -/* Extension Program operation functions *************************************/ -HAL_StatusTypeDef HAL_FLASHEx_Erase(FLASH_EraseInitTypeDef *pEraseInit, uint32_t *SectorError); -HAL_StatusTypeDef HAL_FLASHEx_Erase_IT(FLASH_EraseInitTypeDef *pEraseInit); -HAL_StatusTypeDef HAL_FLASHEx_OBProgram(FLASH_OBProgramInitTypeDef *pOBInit); -void HAL_FLASHEx_OBGetConfig(FLASH_OBProgramInitTypeDef *pOBInit); - -/** - * @} - */ - -/** - * @} - */ -/* Private types -------------------------------------------------------------*/ -/* Private variables ---------------------------------------------------------*/ -/* Private constants ---------------------------------------------------------*/ -/* Private macros ------------------------------------------------------------*/ -/** @defgroup FLASHEx_Private_Macros FLASH Private Macros - * @{ - */ - -/** @defgroup FLASHEx_IS_FLASH_Definitions FLASH Private macros to check input parameters - * @{ - */ - -#define IS_FLASH_TYPEERASE(VALUE)(((VALUE) == FLASH_TYPEERASE_SECTORS) || \ - ((VALUE) == FLASH_TYPEERASE_MASSERASE)) - -#define IS_VOLTAGERANGE(RANGE)(((RANGE) == FLASH_VOLTAGE_RANGE_1) || \ - ((RANGE) == FLASH_VOLTAGE_RANGE_2) || \ - ((RANGE) == FLASH_VOLTAGE_RANGE_3) || \ - ((RANGE) == FLASH_VOLTAGE_RANGE_4)) - -#define IS_WRPSTATE(VALUE)(((VALUE) == OB_WRPSTATE_DISABLE) || \ - ((VALUE) == OB_WRPSTATE_ENABLE)) - -#if defined (FLASH_OPTCR2_PCROP) -#define IS_OPTIONBYTE(VALUE)(((VALUE) <= (OPTIONBYTE_WRP | OPTIONBYTE_RDP | OPTIONBYTE_USER |\ - OPTIONBYTE_BOR | OPTIONBYTE_BOOTADDR_0 | OPTIONBYTE_BOOTADDR_1 |\ - OPTIONBYTE_PCROP | OPTIONBYTE_PCROP_RDP))) -#else -#define IS_OPTIONBYTE(VALUE)(((VALUE) <= (OPTIONBYTE_WRP | OPTIONBYTE_RDP | OPTIONBYTE_USER |\ - OPTIONBYTE_BOR | OPTIONBYTE_BOOTADDR_0 | OPTIONBYTE_BOOTADDR_1))) -#endif /* FLASH_OPTCR2_PCROP */ - -#define IS_OB_BOOT_ADDRESS(ADDRESS) ((ADDRESS) <= 0x8013) - -#define IS_OB_RDP_LEVEL(LEVEL) (((LEVEL) == OB_RDP_LEVEL_0) ||\ - ((LEVEL) == OB_RDP_LEVEL_1) ||\ - ((LEVEL) == OB_RDP_LEVEL_2)) - -#define IS_OB_WWDG_SOURCE(SOURCE) (((SOURCE) == OB_WWDG_SW) || ((SOURCE) == OB_WWDG_HW)) - -#define IS_OB_IWDG_SOURCE(SOURCE) (((SOURCE) == OB_IWDG_SW) || ((SOURCE) == OB_IWDG_HW)) - -#define IS_OB_STOP_SOURCE(SOURCE) (((SOURCE) == OB_STOP_NO_RST) || ((SOURCE) == OB_STOP_RST)) - -#define IS_OB_STDBY_SOURCE(SOURCE) (((SOURCE) == OB_STDBY_NO_RST) || ((SOURCE) == OB_STDBY_RST)) - -#define IS_OB_IWDG_STOP_FREEZE(FREEZE) (((FREEZE) == OB_IWDG_STOP_FREEZE) || ((FREEZE) == OB_IWDG_STOP_ACTIVE)) - -#define IS_OB_IWDG_STDBY_FREEZE(FREEZE) (((FREEZE) == OB_IWDG_STDBY_FREEZE) || ((FREEZE) == OB_IWDG_STDBY_ACTIVE)) - -#define IS_OB_BOR_LEVEL(LEVEL) (((LEVEL) == OB_BOR_LEVEL1) || ((LEVEL) == OB_BOR_LEVEL2) ||\ - ((LEVEL) == OB_BOR_LEVEL3) || ((LEVEL) == OB_BOR_OFF)) - -#define IS_FLASH_LATENCY(LATENCY) (((LATENCY) == FLASH_LATENCY_0) || \ - ((LATENCY) == FLASH_LATENCY_1) || \ - ((LATENCY) == FLASH_LATENCY_2) || \ - ((LATENCY) == FLASH_LATENCY_3) || \ - ((LATENCY) == FLASH_LATENCY_4) || \ - ((LATENCY) == FLASH_LATENCY_5) || \ - ((LATENCY) == FLASH_LATENCY_6) || \ - ((LATENCY) == FLASH_LATENCY_7) || \ - ((LATENCY) == FLASH_LATENCY_8) || \ - ((LATENCY) == FLASH_LATENCY_9) || \ - ((LATENCY) == FLASH_LATENCY_10) || \ - ((LATENCY) == FLASH_LATENCY_11) || \ - ((LATENCY) == FLASH_LATENCY_12) || \ - ((LATENCY) == FLASH_LATENCY_13) || \ - ((LATENCY) == FLASH_LATENCY_14) || \ - ((LATENCY) == FLASH_LATENCY_15)) - -#define IS_FLASH_ADDRESS(ADDRESS) ((((ADDRESS) >= FLASH_BASE) && ((ADDRESS) <= FLASH_END)) || \ - (((ADDRESS) >= FLASH_OTP_BASE) && ((ADDRESS) <= FLASH_OTP_END))) -#define IS_FLASH_NBSECTORS(NBSECTORS) (((NBSECTORS) != 0U) && ((NBSECTORS) <= FLASH_SECTOR_TOTAL)) - -#if (FLASH_SECTOR_TOTAL == 8) -#define IS_FLASH_SECTOR(SECTOR) (((SECTOR) == FLASH_SECTOR_0) || ((SECTOR) == FLASH_SECTOR_1) ||\ - ((SECTOR) == FLASH_SECTOR_2) || ((SECTOR) == FLASH_SECTOR_3) ||\ - ((SECTOR) == FLASH_SECTOR_4) || ((SECTOR) == FLASH_SECTOR_5) ||\ - ((SECTOR) == FLASH_SECTOR_6) || ((SECTOR) == FLASH_SECTOR_7)) - -#define IS_OB_WRP_SECTOR(SECTOR) ((((SECTOR) & 0xFF00FFFFU) == 0x00000000U) && ((SECTOR) != 0x00000000U)) -#endif /* FLASH_SECTOR_TOTAL == 8 */ - -#if (FLASH_SECTOR_TOTAL == 24) -#define IS_FLASH_SECTOR(SECTOR) (((SECTOR) == FLASH_SECTOR_0) || ((SECTOR) == FLASH_SECTOR_1) ||\ - ((SECTOR) == FLASH_SECTOR_2) || ((SECTOR) == FLASH_SECTOR_3) ||\ - ((SECTOR) == FLASH_SECTOR_4) || ((SECTOR) == FLASH_SECTOR_5) ||\ - ((SECTOR) == FLASH_SECTOR_6) || ((SECTOR) == FLASH_SECTOR_7) ||\ - ((SECTOR) == FLASH_SECTOR_8) || ((SECTOR) == FLASH_SECTOR_9) ||\ - ((SECTOR) == FLASH_SECTOR_10) || ((SECTOR) == FLASH_SECTOR_11) ||\ - ((SECTOR) == FLASH_SECTOR_12) || ((SECTOR) == FLASH_SECTOR_13) ||\ - ((SECTOR) == FLASH_SECTOR_14) || ((SECTOR) == FLASH_SECTOR_15) ||\ - ((SECTOR) == FLASH_SECTOR_16) || ((SECTOR) == FLASH_SECTOR_17) ||\ - ((SECTOR) == FLASH_SECTOR_18) || ((SECTOR) == FLASH_SECTOR_19) ||\ - ((SECTOR) == FLASH_SECTOR_20) || ((SECTOR) == FLASH_SECTOR_21) ||\ - ((SECTOR) == FLASH_SECTOR_22) || ((SECTOR) == FLASH_SECTOR_23)) - -#define IS_OB_WRP_SECTOR(SECTOR) ((((SECTOR) & 0xF000FFFFU) == 0x00000000U) && ((SECTOR) != 0x00000000U)) -#endif /* FLASH_SECTOR_TOTAL == 24 */ - -#if (FLASH_SECTOR_TOTAL == 4) -#define IS_FLASH_SECTOR(SECTOR) (((SECTOR) == FLASH_SECTOR_0) || ((SECTOR) == FLASH_SECTOR_1) ||\ - ((SECTOR) == FLASH_SECTOR_2) || ((SECTOR) == FLASH_SECTOR_3)) - -#define IS_OB_WRP_SECTOR(SECTOR) ((((SECTOR) & 0xFFF0FFFFU) == 0x00000000U) && ((SECTOR) != 0x00000000U)) -#endif /* FLASH_SECTOR_TOTAL == 4 */ - -#if (FLASH_SECTOR_TOTAL == 2) -#define IS_FLASH_SECTOR(SECTOR) (((SECTOR) == FLASH_SECTOR_0) || ((SECTOR) == FLASH_SECTOR_1)) - -#define IS_OB_WRP_SECTOR(SECTOR) ((((SECTOR) & 0xFFFCFFFFU) == 0x00000000U) && ((SECTOR) != 0x00000000U)) -#endif /* FLASH_SECTOR_TOTAL == 2 */ - -#if defined (FLASH_OPTCR_nDBANK) -#define IS_OB_NDBANK(VALUE) (((VALUE) == OB_NDBANK_SINGLE_BANK) || \ - ((VALUE) == OB_NDBANK_DUAL_BANK)) - -#define IS_FLASH_BANK(BANK) (((BANK) == FLASH_BANK_1) || \ - ((BANK) == FLASH_BANK_2) || \ - ((BANK) == FLASH_BANK_BOTH)) -#endif /* FLASH_OPTCR_nDBANK */ - -#if defined (FLASH_OPTCR_nDBOOT) -#define IS_OB_NDBOOT(VALUE) (((VALUE) == OB_DUAL_BOOT_DISABLE) || \ - ((VALUE) == OB_DUAL_BOOT_ENABLE)) -#endif /* FLASH_OPTCR_nDBOOT */ - -#if defined (FLASH_OPTCR2_PCROP) -#define IS_OB_PCROP_SECTOR(SECTOR) (((SECTOR) & (uint32_t)0xFFFFFF00U) == 0x00000000U) -#define IS_OB_PCROP_RDP_VALUE(VALUE) (((VALUE) == OB_PCROP_RDP_DISABLE) || \ - ((VALUE) == OB_PCROP_RDP_ENABLE)) -#endif /* FLASH_OPTCR2_PCROP */ - -/** - * @} - */ - -/** - * @} - */ - -/* Private functions ---------------------------------------------------------*/ -/** @defgroup FLASHEx_Private_Functions FLASH Private Functions - * @{ - */ -void FLASH_Erase_Sector(uint32_t Sector, uint8_t VoltageRange); -/** - * @} - */ - -/** - * @} - */ - -/** - * @} - */ - -#ifdef __cplusplus -} -#endif - -#endif /* __STM32F7xx_HAL_FLASH_EX_H */ - -/************************ (C) COPYRIGHT STMicroelectronics *****END OF FILE****/ diff --git a/test_dma/Drivers/STM32F7xx_HAL_Driver/Inc/stm32f7xx_hal_gpio.h b/test_dma/Drivers/STM32F7xx_HAL_Driver/Inc/stm32f7xx_hal_gpio.h deleted file mode 100644 index 3d9de6e..0000000 --- a/test_dma/Drivers/STM32F7xx_HAL_Driver/Inc/stm32f7xx_hal_gpio.h +++ /dev/null @@ -1,309 +0,0 @@ -/** - ****************************************************************************** - * @file stm32f7xx_hal_gpio.h - * @author MCD Application Team - * @brief Header file of GPIO HAL module. - ****************************************************************************** - * @attention - * - *

© Copyright (c) 2017 STMicroelectronics. - * All rights reserved.

- * - * This software component is licensed by ST under BSD 3-Clause license, - * the "License"; You may not use this file except in compliance with the - * License. You may obtain a copy of the License at: - * opensource.org/licenses/BSD-3-Clause - * - ****************************************************************************** - */ - -/* Define to prevent recursive inclusion -------------------------------------*/ -#ifndef __STM32F7xx_HAL_GPIO_H -#define __STM32F7xx_HAL_GPIO_H - -#ifdef __cplusplus - extern "C" { -#endif - -/* Includes ------------------------------------------------------------------*/ -#include "stm32f7xx_hal_def.h" - -/** @addtogroup STM32F7xx_HAL_Driver - * @{ - */ - -/** @addtogroup GPIO - * @{ - */ - -/* Exported types ------------------------------------------------------------*/ -/** @defgroup GPIO_Exported_Types GPIO Exported Types - * @{ - */ - -/** - * @brief GPIO Init structure definition - */ -typedef struct -{ - uint32_t Pin; /*!< Specifies the GPIO pins to be configured. - This parameter can be any value of @ref GPIO_pins_define */ - - uint32_t Mode; /*!< Specifies the operating mode for the selected pins. - This parameter can be a value of @ref GPIO_mode_define */ - - uint32_t Pull; /*!< Specifies the Pull-up or Pull-Down activation for the selected pins. - This parameter can be a value of @ref GPIO_pull_define */ - - uint32_t Speed; /*!< Specifies the speed for the selected pins. - This parameter can be a value of @ref GPIO_speed_define */ - - uint32_t Alternate; /*!< Peripheral to be connected to the selected pins. - This parameter can be a value of @ref GPIO_Alternate_function_selection */ -}GPIO_InitTypeDef; - -/** - * @brief GPIO Bit SET and Bit RESET enumeration - */ -typedef enum -{ - GPIO_PIN_RESET = 0, - GPIO_PIN_SET -}GPIO_PinState; -/** - * @} - */ - -/* Exported constants --------------------------------------------------------*/ - -/** @defgroup GPIO_Exported_Constants GPIO Exported Constants - * @{ - */ - -/** @defgroup GPIO_pins_define GPIO pins define - * @{ - */ -#define GPIO_PIN_0 ((uint16_t)0x0001U) /* Pin 0 selected */ -#define GPIO_PIN_1 ((uint16_t)0x0002U) /* Pin 1 selected */ -#define GPIO_PIN_2 ((uint16_t)0x0004U) /* Pin 2 selected */ -#define GPIO_PIN_3 ((uint16_t)0x0008U) /* Pin 3 selected */ -#define GPIO_PIN_4 ((uint16_t)0x0010U) /* Pin 4 selected */ -#define GPIO_PIN_5 ((uint16_t)0x0020U) /* Pin 5 selected */ -#define GPIO_PIN_6 ((uint16_t)0x0040U) /* Pin 6 selected */ -#define GPIO_PIN_7 ((uint16_t)0x0080U) /* Pin 7 selected */ -#define GPIO_PIN_8 ((uint16_t)0x0100U) /* Pin 8 selected */ -#define GPIO_PIN_9 ((uint16_t)0x0200U) /* Pin 9 selected */ -#define GPIO_PIN_10 ((uint16_t)0x0400U) /* Pin 10 selected */ -#define GPIO_PIN_11 ((uint16_t)0x0800U) /* Pin 11 selected */ -#define GPIO_PIN_12 ((uint16_t)0x1000U) /* Pin 12 selected */ -#define GPIO_PIN_13 ((uint16_t)0x2000U) /* Pin 13 selected */ -#define GPIO_PIN_14 ((uint16_t)0x4000U) /* Pin 14 selected */ -#define GPIO_PIN_15 ((uint16_t)0x8000U) /* Pin 15 selected */ -#define GPIO_PIN_All ((uint16_t)0xFFFFU) /* All pins selected */ - -#define GPIO_PIN_MASK ((uint32_t)0x0000FFFFU) /* PIN mask for assert test */ -/** - * @} - */ - -/** @defgroup GPIO_mode_define GPIO mode define - * @brief GPIO Configuration Mode - * Elements values convention: 0xX0yz00YZ - * - X : GPIO mode or EXTI Mode - * - y : External IT or Event trigger detection - * - z : IO configuration on External IT or Event - * - Y : Output type (Push Pull or Open Drain) - * - Z : IO Direction mode (Input, Output, Alternate or Analog) - * @{ - */ -#define GPIO_MODE_INPUT ((uint32_t)0x00000000U) /*!< Input Floating Mode */ -#define GPIO_MODE_OUTPUT_PP ((uint32_t)0x00000001U) /*!< Output Push Pull Mode */ -#define GPIO_MODE_OUTPUT_OD ((uint32_t)0x00000011U) /*!< Output Open Drain Mode */ -#define GPIO_MODE_AF_PP ((uint32_t)0x00000002U) /*!< Alternate Function Push Pull Mode */ -#define GPIO_MODE_AF_OD ((uint32_t)0x00000012U) /*!< Alternate Function Open Drain Mode */ - -#define GPIO_MODE_ANALOG ((uint32_t)0x00000003U) /*!< Analog Mode */ - -#define GPIO_MODE_IT_RISING ((uint32_t)0x10110000U) /*!< External Interrupt Mode with Rising edge trigger detection */ -#define GPIO_MODE_IT_FALLING ((uint32_t)0x10210000U) /*!< External Interrupt Mode with Falling edge trigger detection */ -#define GPIO_MODE_IT_RISING_FALLING ((uint32_t)0x10310000U) /*!< External Interrupt Mode with Rising/Falling edge trigger detection */ - -#define GPIO_MODE_EVT_RISING ((uint32_t)0x10120000U) /*!< External Event Mode with Rising edge trigger detection */ -#define GPIO_MODE_EVT_FALLING ((uint32_t)0x10220000U) /*!< External Event Mode with Falling edge trigger detection */ -#define GPIO_MODE_EVT_RISING_FALLING ((uint32_t)0x10320000U) /*!< External Event Mode with Rising/Falling edge trigger detection */ -/** - * @} - */ - -/** @defgroup GPIO_speed_define GPIO speed define - * @brief GPIO Output Maximum frequency - * @{ - */ -#define GPIO_SPEED_FREQ_LOW ((uint32_t)0x00000000U) /*!< Low speed */ -#define GPIO_SPEED_FREQ_MEDIUM ((uint32_t)0x00000001U) /*!< Medium speed */ -#define GPIO_SPEED_FREQ_HIGH ((uint32_t)0x00000002U) /*!< Fast speed */ -#define GPIO_SPEED_FREQ_VERY_HIGH ((uint32_t)0x00000003U) /*!< High speed */ -/** - * @} - */ - - /** @defgroup GPIO_pull_define GPIO pull define - * @brief GPIO Pull-Up or Pull-Down Activation - * @{ - */ -#define GPIO_NOPULL ((uint32_t)0x00000000U) /*!< No Pull-up or Pull-down activation */ -#define GPIO_PULLUP ((uint32_t)0x00000001U) /*!< Pull-up activation */ -#define GPIO_PULLDOWN ((uint32_t)0x00000002U) /*!< Pull-down activation */ -/** - * @} - */ - -/** - * @} - */ - -/* Exported macro ------------------------------------------------------------*/ -/** @defgroup GPIO_Exported_Macros GPIO Exported Macros - * @{ - */ - -/** - * @brief Checks whether the specified EXTI line flag is set or not. - * @param __EXTI_LINE__ specifies the EXTI line flag to check. - * This parameter can be GPIO_PIN_x where x can be(0..15) - * @retval The new state of __EXTI_LINE__ (SET or RESET). - */ -#define __HAL_GPIO_EXTI_GET_FLAG(__EXTI_LINE__) (EXTI->PR & (__EXTI_LINE__)) - -/** - * @brief Clears the EXTI's line pending flags. - * @param __EXTI_LINE__ specifies the EXTI lines flags to clear. - * This parameter can be any combination of GPIO_PIN_x where x can be (0..15) - * @retval None - */ -#define __HAL_GPIO_EXTI_CLEAR_FLAG(__EXTI_LINE__) (EXTI->PR = (__EXTI_LINE__)) - -/** - * @brief Checks whether the specified EXTI line is asserted or not. - * @param __EXTI_LINE__ specifies the EXTI line to check. - * This parameter can be GPIO_PIN_x where x can be(0..15) - * @retval The new state of __EXTI_LINE__ (SET or RESET). - */ -#define __HAL_GPIO_EXTI_GET_IT(__EXTI_LINE__) (EXTI->PR & (__EXTI_LINE__)) - -/** - * @brief Clears the EXTI's line pending bits. - * @param __EXTI_LINE__ specifies the EXTI lines to clear. - * This parameter can be any combination of GPIO_PIN_x where x can be (0..15) - * @retval None - */ -#define __HAL_GPIO_EXTI_CLEAR_IT(__EXTI_LINE__) (EXTI->PR = (__EXTI_LINE__)) - -/** - * @brief Generates a Software interrupt on selected EXTI line. - * @param __EXTI_LINE__ specifies the EXTI line to check. - * This parameter can be GPIO_PIN_x where x can be(0..15) - * @retval None - */ -#define __HAL_GPIO_EXTI_GENERATE_SWIT(__EXTI_LINE__) (EXTI->SWIER |= (__EXTI_LINE__)) -/** - * @} - */ - -/* Include GPIO HAL Extension module */ -#include "stm32f7xx_hal_gpio_ex.h" - -/* Exported functions --------------------------------------------------------*/ -/** @addtogroup GPIO_Exported_Functions - * @{ - */ - -/** @addtogroup GPIO_Exported_Functions_Group1 - * @{ - */ -/* Initialization and de-initialization functions *****************************/ -void HAL_GPIO_Init(GPIO_TypeDef *GPIOx, GPIO_InitTypeDef *GPIO_Init); -void HAL_GPIO_DeInit(GPIO_TypeDef *GPIOx, uint32_t GPIO_Pin); -/** - * @} - */ - -/** @addtogroup GPIO_Exported_Functions_Group2 - * @{ - */ -/* IO operation functions *****************************************************/ -GPIO_PinState HAL_GPIO_ReadPin(GPIO_TypeDef* GPIOx, uint16_t GPIO_Pin); -void HAL_GPIO_WritePin(GPIO_TypeDef* GPIOx, uint16_t GPIO_Pin, GPIO_PinState PinState); -void HAL_GPIO_TogglePin(GPIO_TypeDef* GPIOx, uint16_t GPIO_Pin); -HAL_StatusTypeDef HAL_GPIO_LockPin(GPIO_TypeDef* GPIOx, uint16_t GPIO_Pin); -void HAL_GPIO_EXTI_IRQHandler(uint16_t GPIO_Pin); -void HAL_GPIO_EXTI_Callback(uint16_t GPIO_Pin); - -/** - * @} - */ - -/** - * @} - */ -/* Private types -------------------------------------------------------------*/ -/* Private variables ---------------------------------------------------------*/ -/* Private constants ---------------------------------------------------------*/ -/** @defgroup GPIO_Private_Constants GPIO Private Constants - * @{ - */ - -/** - * @} - */ - -/* Private macros ------------------------------------------------------------*/ -/** @defgroup GPIO_Private_Macros GPIO Private Macros - * @{ - */ -#define IS_GPIO_PIN_ACTION(ACTION) (((ACTION) == GPIO_PIN_RESET) || ((ACTION) == GPIO_PIN_SET)) -#define IS_GPIO_PIN(__PIN__) ((((__PIN__) & GPIO_PIN_MASK) != (uint32_t)0x00)) -#define IS_GPIO_MODE(MODE) (((MODE) == GPIO_MODE_INPUT) ||\ - ((MODE) == GPIO_MODE_OUTPUT_PP) ||\ - ((MODE) == GPIO_MODE_OUTPUT_OD) ||\ - ((MODE) == GPIO_MODE_AF_PP) ||\ - ((MODE) == GPIO_MODE_AF_OD) ||\ - ((MODE) == GPIO_MODE_IT_RISING) ||\ - ((MODE) == GPIO_MODE_IT_FALLING) ||\ - ((MODE) == GPIO_MODE_IT_RISING_FALLING) ||\ - ((MODE) == GPIO_MODE_EVT_RISING) ||\ - ((MODE) == GPIO_MODE_EVT_FALLING) ||\ - ((MODE) == GPIO_MODE_EVT_RISING_FALLING) ||\ - ((MODE) == GPIO_MODE_ANALOG)) -#define IS_GPIO_SPEED(SPEED) (((SPEED) == GPIO_SPEED_LOW) || ((SPEED) == GPIO_SPEED_MEDIUM) || \ - ((SPEED) == GPIO_SPEED_FAST) || ((SPEED) == GPIO_SPEED_HIGH)) -#define IS_GPIO_PULL(PULL) (((PULL) == GPIO_NOPULL) || ((PULL) == GPIO_PULLUP) || \ - ((PULL) == GPIO_PULLDOWN)) -/** - * @} - */ - -/* Private functions ---------------------------------------------------------*/ -/** @defgroup GPIO_Private_Functions GPIO Private Functions - * @{ - */ - -/** - * @} - */ - -/** - * @} - */ - -/** - * @} - */ - -#ifdef __cplusplus -} -#endif - -#endif /* __STM32F7xx_HAL_GPIO_H */ - -/************************ (C) COPYRIGHT STMicroelectronics *****END OF FILE****/ diff --git a/test_dma/Drivers/STM32F7xx_HAL_Driver/Inc/stm32f7xx_hal_gpio_ex.h b/test_dma/Drivers/STM32F7xx_HAL_Driver/Inc/stm32f7xx_hal_gpio_ex.h deleted file mode 100644 index cd1413c..0000000 --- a/test_dma/Drivers/STM32F7xx_HAL_Driver/Inc/stm32f7xx_hal_gpio_ex.h +++ /dev/null @@ -1,658 +0,0 @@ -/** - ****************************************************************************** - * @file stm32f7xx_hal_gpio_ex.h - * @author MCD Application Team - * @brief Header file of GPIO HAL Extension module. - ****************************************************************************** - * @attention - * - *

© Copyright (c) 2017 STMicroelectronics. - * All rights reserved.

- * - * This software component is licensed by ST under BSD 3-Clause license, - * the "License"; You may not use this file except in compliance with the - * License. You may obtain a copy of the License at: - * opensource.org/licenses/BSD-3-Clause - * - ****************************************************************************** - */ - -/* Define to prevent recursive inclusion -------------------------------------*/ -#ifndef __STM32F7xx_HAL_GPIO_EX_H -#define __STM32F7xx_HAL_GPIO_EX_H - -#ifdef __cplusplus - extern "C" { -#endif - -/* Includes ------------------------------------------------------------------*/ -#include "stm32f7xx_hal_def.h" - -/** @addtogroup STM32F7xx_HAL_Driver - * @{ - */ - -/** @defgroup GPIOEx GPIOEx - * @{ - */ - -/* Exported types ------------------------------------------------------------*/ - -/* Exported constants --------------------------------------------------------*/ -/** @defgroup GPIOEx_Exported_Constants GPIO Exported Constants - * @{ - */ - -/** @defgroup GPIO_Alternate_function_selection GPIO Alternate Function Selection - * @{ - */ -/*--------------- STM32F74xxx/STM32F75xxx/STM32F76xxx/STM32F77xxx -------------*/ -#if defined (STM32F745xx) || defined (STM32F746xx) || defined (STM32F756xx) || defined (STM32F765xx) || defined (STM32F767xx) ||\ - defined (STM32F769xx) || defined (STM32F777xx) || defined (STM32F779xx) || defined (STM32F750xx) -/** - * @brief AF 0 selection - */ -#define GPIO_AF0_RTC_50Hz ((uint8_t)0x00U) /* RTC_50Hz Alternate Function mapping */ -#define GPIO_AF0_MCO ((uint8_t)0x00U) /* MCO (MCO1 and MCO2) Alternate Function mapping */ -#define GPIO_AF0_SWJ ((uint8_t)0x00U) /* SWJ (SWD and JTAG) Alternate Function mapping */ -#define GPIO_AF0_TRACE ((uint8_t)0x00U) /* TRACE Alternate Function mapping */ - -/** - * @brief AF 1 selection - */ -#define GPIO_AF1_TIM1 ((uint8_t)0x01U) /* TIM1 Alternate Function mapping */ -#define GPIO_AF1_TIM2 ((uint8_t)0x01U) /* TIM2 Alternate Function mapping */ -#if defined (STM32F765xx) || defined(STM32F767xx) || defined(STM32F769xx) || defined(STM32F777xx) || defined(STM32F779xx) -#define GPIO_AF1_UART5 ((uint8_t)0x01U) /* UART5 Alternate Function mapping */ -#define GPIO_AF1_I2C4 ((uint8_t)0x01U) /* I2C4 Alternate Function mapping */ -#endif /* STM32F767xx || STM32F769xx || STM32F777xx || STM32F779xx */ - -/** - * @brief AF 2 selection - */ -#define GPIO_AF2_TIM3 ((uint8_t)0x02U) /* TIM3 Alternate Function mapping */ -#define GPIO_AF2_TIM4 ((uint8_t)0x02U) /* TIM4 Alternate Function mapping */ -#define GPIO_AF2_TIM5 ((uint8_t)0x02U) /* TIM5 Alternate Function mapping */ - -/** - * @brief AF 3 selection - */ -#define GPIO_AF3_TIM8 ((uint8_t)0x03U) /* TIM8 Alternate Function mapping */ -#define GPIO_AF3_TIM9 ((uint8_t)0x03U) /* TIM9 Alternate Function mapping */ -#define GPIO_AF3_TIM10 ((uint8_t)0x03U) /* TIM10 Alternate Function mapping */ -#define GPIO_AF3_TIM11 ((uint8_t)0x03U) /* TIM11 Alternate Function mapping */ -#define GPIO_AF3_LPTIM1 ((uint8_t)0x03U) /* LPTIM1 Alternate Function mapping */ -#define GPIO_AF3_CEC ((uint8_t)0x03U) /* CEC Alternate Function mapping */ -#if defined (STM32F765xx) || defined(STM32F767xx) || defined(STM32F769xx) || defined(STM32F777xx) || defined(STM32F779xx) -#define GPIO_AF3_DFSDM1 ((uint8_t)0x03U) /* DFSDM1 Alternate Function mapping */ -#endif /* STM32F767xx || STM32F769xx || STM32F777xx || STM32F779xx */ -/** - * @brief AF 4 selection - */ -#define GPIO_AF4_I2C1 ((uint8_t)0x04U) /* I2C1 Alternate Function mapping */ -#define GPIO_AF4_I2C2 ((uint8_t)0x04U) /* I2C2 Alternate Function mapping */ -#define GPIO_AF4_I2C3 ((uint8_t)0x04U) /* I2C3 Alternate Function mapping */ -#define GPIO_AF4_I2C4 ((uint8_t)0x04U) /* I2C4 Alternate Function mapping */ -#define GPIO_AF4_CEC ((uint8_t)0x04U) /* CEC Alternate Function mapping */ -#if defined (STM32F765xx) || defined(STM32F767xx) || defined(STM32F769xx) || defined(STM32F777xx) || defined(STM32F779xx) -#define GPIO_AF4_USART1 ((uint8_t)0x04) /* USART1 Alternate Function mapping */ -#endif /* STM32F767xx || STM32F769xx || STM32F777xx || STM32F779xx */ - -/** - * @brief AF 5 selection - */ -#define GPIO_AF5_SPI1 ((uint8_t)0x05U) /* SPI1 Alternate Function mapping */ -#define GPIO_AF5_SPI2 ((uint8_t)0x05U) /* SPI2/I2S2 Alternate Function mapping */ -#define GPIO_AF5_SPI3 ((uint8_t)0x05U) /* SPI3/I2S3 Alternate Function mapping */ -#define GPIO_AF5_SPI4 ((uint8_t)0x05U) /* SPI4 Alternate Function mapping */ -#define GPIO_AF5_SPI5 ((uint8_t)0x05U) /* SPI5 Alternate Function mapping */ -#define GPIO_AF5_SPI6 ((uint8_t)0x05U) /* SPI6 Alternate Function mapping */ - -/** - * @brief AF 6 selection - */ -#define GPIO_AF6_SPI3 ((uint8_t)0x06U) /* SPI3/I2S3 Alternate Function mapping */ -#define GPIO_AF6_SAI1 ((uint8_t)0x06U) /* SAI1 Alternate Function mapping */ -#if defined (STM32F765xx) || defined(STM32F767xx) || defined(STM32F769xx) || defined(STM32F777xx) || defined(STM32F779xx) -#define GPIO_AF6_UART4 ((uint8_t)0x06U) /* UART4 Alternate Function mapping */ -#define GPIO_AF6_DFSDM1 ((uint8_t)0x06U) /* DFSDM1 Alternate Function mapping */ -#endif /* STM32F767xx || STM32F769xx || STM32F777xx || STM32F779xx */ - -/** - * @brief AF 7 selection - */ -#define GPIO_AF7_USART1 ((uint8_t)0x07U) /* USART1 Alternate Function mapping */ -#define GPIO_AF7_USART2 ((uint8_t)0x07U) /* USART2 Alternate Function mapping */ -#define GPIO_AF7_USART3 ((uint8_t)0x07U) /* USART3 Alternate Function mapping */ -#define GPIO_AF7_UART5 ((uint8_t)0x07U) /* UART5 Alternate Function mapping */ -#define GPIO_AF7_SPDIFRX ((uint8_t)0x07U) /* SPDIF-RX Alternate Function mapping */ -#define GPIO_AF7_SPI2 ((uint8_t)0x07U) /* SPI2 Alternate Function mapping */ -#define GPIO_AF7_SPI3 ((uint8_t)0x07U) /* SPI3 Alternate Function mapping */ -#if defined (STM32F765xx) || defined(STM32F767xx) || defined(STM32F769xx) || defined(STM32F777xx) || defined(STM32F779xx) -#define GPIO_AF7_SPI6 ((uint8_t)0x07U) /* SPI6 Alternate Function mapping */ -#define GPIO_AF7_DFSDM1 ((uint8_t)0x07U) /* DFSDM1 Alternate Function mapping */ -#endif /* STM32F767xx || STM32F769xx || STM32F777xx || STM32F779xx */ - -/** - * @brief AF 8 selection - */ -#define GPIO_AF8_UART4 ((uint8_t)0x08U) /* UART4 Alternate Function mapping */ -#define GPIO_AF8_UART5 ((uint8_t)0x08U) /* UART5 Alternate Function mapping */ -#define GPIO_AF8_USART6 ((uint8_t)0x08U) /* USART6 Alternate Function mapping */ -#define GPIO_AF8_UART7 ((uint8_t)0x08U) /* UART7 Alternate Function mapping */ -#define GPIO_AF8_UART8 ((uint8_t)0x08U) /* UART8 Alternate Function mapping */ -#define GPIO_AF8_SPDIFRX ((uint8_t)0x08U) /* SPIDIF-RX Alternate Function mapping */ -#define GPIO_AF8_SAI2 ((uint8_t)0x08U) /* SAI2 Alternate Function mapping */ -#if defined (STM32F765xx) || defined(STM32F767xx) || defined(STM32F769xx) || defined(STM32F777xx) || defined(STM32F779xx) -#define GPIO_AF8_SPI6 ((uint8_t)0x08U) /* SPI6 Alternate Function mapping */ -#endif /* STM32F767xx || STM32F769xx || STM32F777xx || STM32F779xx */ - - -/** - * @brief AF 9 selection - */ -#define GPIO_AF9_CAN1 ((uint8_t)0x09U) /* CAN1 Alternate Function mapping */ -#define GPIO_AF9_CAN2 ((uint8_t)0x09U) /* CAN2 Alternate Function mapping */ -#define GPIO_AF9_TIM12 ((uint8_t)0x09U) /* TIM12 Alternate Function mapping */ -#define GPIO_AF9_TIM13 ((uint8_t)0x09U) /* TIM13 Alternate Function mapping */ -#define GPIO_AF9_TIM14 ((uint8_t)0x09U) /* TIM14 Alternate Function mapping */ -#define GPIO_AF9_QUADSPI ((uint8_t)0x09U) /* QUADSPI Alternate Function mapping */ -#if defined(STM32F746xx) || defined(STM32F756xx) || defined(STM32F767xx) || defined(STM32F769xx) || defined(STM32F777xx) || defined(STM32F779xx) || defined(STM32F750xx) -#define GPIO_AF9_LTDC ((uint8_t)0x09U) /* LCD-TFT Alternate Function mapping */ -#endif /* STM32F746xx || STM32F756xx || STM32F767xx || STM32F769xx || STM32F777xx || STM32F779xx || STM32F750xx */ -#if defined(STM32F746xx) || defined(STM32F756xx) || defined(STM32F765xx) || defined(STM32F765xx) || defined(STM32F767xx) || defined(STM32F769xx) || defined(STM32F777xx) || defined(STM32F779xx) || defined(STM32F750xx) -#define GPIO_AF9_FMC ((uint8_t)0x09U) /* FMC Alternate Function mapping */ -#endif /* STM32F746xx || STM32F756xx || STM32F767xx || STM32F769xx || STM32F777xx || STM32F779xx || STM32F750xx */ -/** - * @brief AF 10 selection - */ -#define GPIO_AF10_OTG_FS ((uint8_t)0xAU) /* OTG_FS Alternate Function mapping */ -#define GPIO_AF10_OTG_HS ((uint8_t)0xAU) /* OTG_HS Alternate Function mapping */ -#define GPIO_AF10_QUADSPI ((uint8_t)0xAU) /* QUADSPI Alternate Function mapping */ -#define GPIO_AF10_SAI2 ((uint8_t)0xAU) /* SAI2 Alternate Function mapping */ -#if defined (STM32F765xx) || defined(STM32F767xx) || defined(STM32F769xx) || defined(STM32F777xx) || defined(STM32F779xx) -#define GPIO_AF10_DFSDM1 ((uint8_t)0x0AU) /* DFSDM1 Alternate Function mapping */ -#define GPIO_AF10_SDMMC2 ((uint8_t)0x0AU) /* SDMMC2 Alternate Function mapping */ -#define GPIO_AF10_LTDC ((uint8_t)0x0AU) /* LCD-TFT Alternate Function mapping */ -#endif /* STM32F767xx || STM32F769xx || STM32F777xx || STM32F779xx */ - -/** - * @brief AF 11 selection - */ -#define GPIO_AF11_ETH ((uint8_t)0x0BU) /* ETHERNET Alternate Function mapping */ -#if defined(STM32F765xx) || defined (STM32F767xx) || defined (STM32F769xx) || defined (STM32F777xx) || defined (STM32F779xx) -#define GPIO_AF11_CAN3 ((uint8_t)0x0BU) /* CAN3 Alternate Function mapping */ -#define GPIO_AF11_SDMMC2 ((uint8_t)0x0BU) /* SDMMC2 Alternate Function mapping */ -#define GPIO_AF11_I2C4 ((uint8_t)0x0BU) /* I2C4 Alternate Function mapping */ -#endif /* STM32F767xx || STM32F769xx || STM32F777xx || STM32F779xx */ - -/** - * @brief AF 12 selection - */ -#define GPIO_AF12_FMC ((uint8_t)0xCU) /* FMC Alternate Function mapping */ -#define GPIO_AF12_OTG_HS_FS ((uint8_t)0xCU) /* OTG HS configured in FS, Alternate Function mapping */ -#define GPIO_AF12_SDMMC1 ((uint8_t)0xCU) /* SDMMC1 Alternate Function mapping */ -#if defined(STM32F765xx) || defined (STM32F767xx) || defined (STM32F769xx) || defined (STM32F777xx) || defined (STM32F779xx) -#define GPIO_AF12_MDIOS ((uint8_t)0xCU) /* SDMMC1 Alternate Function mapping */ -#define GPIO_AF12_UART7 ((uint8_t)0xCU) /* UART7 Alternate Function mapping */ -#endif /* STM32F767xx || STM32F769xx || STM32F777xx || STM32F779xx */ - -/** - * @brief AF 13 selection - */ -#define GPIO_AF13_DCMI ((uint8_t)0x0DU) /* DCMI Alternate Function mapping */ -#if defined (STM32F769xx) || defined (STM32F779xx) -#define GPIO_AF13_DSI ((uint8_t)0x0DU) /* DSI Alternate Function mapping */ -#endif /* STM32F767xx || STM32F769xx || STM32F777xx || STM32F779xx */ -#if defined(STM32F746xx) || defined(STM32F756xx) || defined(STM32F767xx) || defined(STM32F769xx) || defined(STM32F777xx) || defined(STM32F779xx) || defined(STM32F750xx) -#define GPIO_AF13_LTDC ((uint8_t)0x0DU) /* LTDC Alternate Function mapping */ - -/** - * @brief AF 14 selection - */ -#define GPIO_AF14_LTDC ((uint8_t)0x0EU) /* LCD-TFT Alternate Function mapping */ -#endif /* STM32F746xx || STM32F756xx || STM32F767xx || STM32F769xx || STM32F777xx || STM32F779xx || STM32F750xx */ -/** - * @brief AF 15 selection - */ -#define GPIO_AF15_EVENTOUT ((uint8_t)0x0FU) /* EVENTOUT Alternate Function mapping */ -#endif /* STM32F745xx || STM32F746xx || STM32F756xx || STM32F765xx || STM32F767xx || STM32F769xx || STM32F777xx || STM32F779xx */ -/*----------------------------------------------------------------------------*/ - -/*---------------------------- STM32F72xxx/STM32F73xxx -----------------------*/ -#if defined(STM32F722xx) || defined(STM32F723xx) || defined(STM32F732xx) || defined(STM32F733xx) || defined(STM32F730xx) - /** - * @brief AF 0 selection - */ -#define GPIO_AF0_RTC_50Hz ((uint8_t)0x00U) /* RTC_50Hz Alternate Function mapping */ -#define GPIO_AF0_MCO ((uint8_t)0x00U) /* MCO (MCO1 and MCO2) Alternate Function mapping */ -#define GPIO_AF0_SWJ ((uint8_t)0x00U) /* SWJ (SWD and JTAG) Alternate Function mapping */ -#define GPIO_AF0_TRACE ((uint8_t)0x00U) /* TRACE Alternate Function mapping */ - -/** - * @brief AF 1 selection - */ -#define GPIO_AF1_TIM1 ((uint8_t)0x01U) /* TIM1 Alternate Function mapping */ -#define GPIO_AF1_TIM2 ((uint8_t)0x01U) /* TIM2 Alternate Function mapping */ - -/** - * @brief AF 2 selection - */ -#define GPIO_AF2_TIM3 ((uint8_t)0x02U) /* TIM3 Alternate Function mapping */ -#define GPIO_AF2_TIM4 ((uint8_t)0x02U) /* TIM4 Alternate Function mapping */ -#define GPIO_AF2_TIM5 ((uint8_t)0x02U) /* TIM5 Alternate Function mapping */ - -/** - * @brief AF 3 selection - */ -#define GPIO_AF3_TIM8 ((uint8_t)0x03U) /* TIM8 Alternate Function mapping */ -#define GPIO_AF3_TIM9 ((uint8_t)0x03U) /* TIM9 Alternate Function mapping */ -#define GPIO_AF3_TIM10 ((uint8_t)0x03U) /* TIM10 Alternate Function mapping */ -#define GPIO_AF3_TIM11 ((uint8_t)0x03U) /* TIM11 Alternate Function mapping */ -#define GPIO_AF3_LPTIM1 ((uint8_t)0x03U) /* LPTIM1 Alternate Function mapping */ - -/** - * @brief AF 4 selection - */ -#define GPIO_AF4_I2C1 ((uint8_t)0x04U) /* I2C1 Alternate Function mapping */ -#define GPIO_AF4_I2C2 ((uint8_t)0x04U) /* I2C2 Alternate Function mapping */ -#define GPIO_AF4_I2C3 ((uint8_t)0x04U) /* I2C3 Alternate Function mapping */ - -/** - * @brief AF 5 selection - */ -#define GPIO_AF5_SPI1 ((uint8_t)0x05U) /* SPI1 Alternate Function mapping */ -#define GPIO_AF5_SPI2 ((uint8_t)0x05U) /* SPI2/I2S2 Alternate Function mapping */ -#define GPIO_AF5_SPI3 ((uint8_t)0x05U) /* SPI3/I2S3 Alternate Function mapping */ -#define GPIO_AF5_SPI4 ((uint8_t)0x05U) /* SPI4 Alternate Function mapping */ -#define GPIO_AF5_SPI5 ((uint8_t)0x05U) /* SPI5 Alternate Function mapping */ - -/** - * @brief AF 6 selection - */ -#define GPIO_AF6_SPI3 ((uint8_t)0x06U) /* SPI3/I2S3 Alternate Function mapping */ -#define GPIO_AF6_SAI1 ((uint8_t)0x06U) /* SAI1 Alternate Function mapping */ - -/** - * @brief AF 7 selection - */ -#define GPIO_AF7_USART1 ((uint8_t)0x07U) /* USART1 Alternate Function mapping */ -#define GPIO_AF7_USART2 ((uint8_t)0x07U) /* USART2 Alternate Function mapping */ -#define GPIO_AF7_USART3 ((uint8_t)0x07U) /* USART3 Alternate Function mapping */ -#define GPIO_AF7_UART5 ((uint8_t)0x07U) /* UART5 Alternate Function mapping */ -#define GPIO_AF7_SPI2 ((uint8_t)0x07U) /* SPI2 Alternate Function mapping */ -#define GPIO_AF7_SPI3 ((uint8_t)0x07U) /* SPI3 Alternate Function mapping */ - -/** - * @brief AF 8 selection - */ -#define GPIO_AF8_UART4 ((uint8_t)0x08U) /* UART4 Alternate Function mapping */ -#define GPIO_AF8_UART5 ((uint8_t)0x08U) /* UART5 Alternate Function mapping */ -#define GPIO_AF8_USART6 ((uint8_t)0x08U) /* USART6 Alternate Function mapping */ -#define GPIO_AF8_UART7 ((uint8_t)0x08U) /* UART7 Alternate Function mapping */ -#define GPIO_AF8_UART8 ((uint8_t)0x08U) /* UART8 Alternate Function mapping */ -#define GPIO_AF8_SAI2 ((uint8_t)0x08U) /* SAI2 Alternate Function mapping */ - -/** - * @brief AF 9 selection - */ -#define GPIO_AF9_CAN1 ((uint8_t)0x09U) /* CAN1 Alternate Function mapping */ -#define GPIO_AF9_TIM12 ((uint8_t)0x09U) /* TIM12 Alternate Function mapping */ -#define GPIO_AF9_TIM13 ((uint8_t)0x09U) /* TIM13 Alternate Function mapping */ -#define GPIO_AF9_TIM14 ((uint8_t)0x09U) /* TIM14 Alternate Function mapping */ -#define GPIO_AF9_QUADSPI ((uint8_t)0x09U) /* QUADSPI Alternate Function mapping */ - -/** - * @brief AF 10 selection - */ -#define GPIO_AF10_OTG_FS ((uint8_t)0xAU) /* OTG_FS Alternate Function mapping */ -#define GPIO_AF10_OTG_HS ((uint8_t)0xAU) /* OTG_HS Alternate Function mapping */ -#define GPIO_AF10_QUADSPI ((uint8_t)0xAU) /* QUADSPI Alternate Function mapping */ -#define GPIO_AF10_SAI2 ((uint8_t)0xAU) /* SAI2 Alternate Function mapping */ -#define GPIO_AF10_SDMMC2 ((uint8_t)0x0AU) /* SDMMC2 Alternate Function mapping */ - -/** - * @brief AF 11 selection - */ -#define GPIO_AF11_SDMMC2 ((uint8_t)0x0BU) /* SDMMC2 Alternate Function mapping */ - -/** - * @brief AF 12 selection - */ -#define GPIO_AF12_FMC ((uint8_t)0xCU) /* FMC Alternate Function mapping */ -#define GPIO_AF12_OTG_HS_FS ((uint8_t)0xCU) /* OTG HS configured in FS, Alternate Function mapping */ -#define GPIO_AF12_SDMMC1 ((uint8_t)0xCU) /* SDMMC1 Alternate Function mapping */ - -/** - * @brief AF 13 selection - */ -#define GPIO_AF13_RNG ((uint8_t)0x0DU) /* RNG Alternate Function mapping */ - -/** - * @brief AF 15 selection - */ -#define GPIO_AF15_EVENTOUT ((uint8_t)0x0FU) /* EVENTOUT Alternate Function mapping */ -#endif /* STM32F722xx || STM32F723xx || STM32F732xx || STM32F733xx || STM32F730xx */ -/*----------------------------------------------------------------------------*/ - -/** - * @} - */ - -/** - * @} - */ - -/* Exported macro ------------------------------------------------------------*/ -/** @defgroup GPIOEx_Exported_Macros GPIO Exported Macros - * @{ - */ -/** - * @} - */ - -/* Exported functions --------------------------------------------------------*/ -/** @defgroup GPIOEx_Exported_Functions GPIO Exported Functions - * @{ - */ -/** - * @} - */ -/* Private types -------------------------------------------------------------*/ -/* Private variables ---------------------------------------------------------*/ -/* Private constants ---------------------------------------------------------*/ -/** @defgroup GPIOEx_Private_Constants GPIO Private Constants - * @{ - */ - -/** - * @brief GPIO pin available on the platform - */ -/* Defines the available pins per GPIOs */ -#define GPIOA_PIN_AVAILABLE GPIO_PIN_All -#define GPIOB_PIN_AVAILABLE GPIO_PIN_All -#define GPIOC_PIN_AVAILABLE GPIO_PIN_All -#define GPIOD_PIN_AVAILABLE GPIO_PIN_All -#define GPIOE_PIN_AVAILABLE GPIO_PIN_All -#define GPIOF_PIN_AVAILABLE GPIO_PIN_All -#define GPIOG_PIN_AVAILABLE GPIO_PIN_All -#define GPIOI_PIN_AVAILABLE GPIO_PIN_All -#define GPIOJ_PIN_AVAILABLE GPIO_PIN_All -#define GPIOH_PIN_AVAILABLE GPIO_PIN_All -#define GPIOK_PIN_AVAILABLE (GPIO_PIN_0 | GPIO_PIN_1 | GPIO_PIN_2 | GPIO_PIN_3 | GPIO_PIN_4 | \ - GPIO_PIN_5 | GPIO_PIN_6 | GPIO_PIN_7) - -/** - * @} - */ - -/* Private macros ------------------------------------------------------------*/ -/** @defgroup GPIOEx_Private_Macros GPIO Private Macros - * @{ - */ -/** @defgroup GPIOEx_Get_Port_Index GPIO Get Port Index - * @{ - */ -#if defined (STM32F745xx) || defined (STM32F746xx) || defined (STM32F756xx) || defined (STM32F765xx) ||\ - defined (STM32F767xx) || defined (STM32F769xx) || defined (STM32F777xx) || defined (STM32F779xx) ||\ - defined (STM32F750xx) -#define GPIO_GET_INDEX(__GPIOx__) (uint8_t)(((__GPIOx__) == (GPIOA))? 0U :\ - ((__GPIOx__) == (GPIOB))? 1U :\ - ((__GPIOx__) == (GPIOC))? 2U :\ - ((__GPIOx__) == (GPIOD))? 3U :\ - ((__GPIOx__) == (GPIOE))? 4U :\ - ((__GPIOx__) == (GPIOF))? 5U :\ - ((__GPIOx__) == (GPIOG))? 6U :\ - ((__GPIOx__) == (GPIOH))? 7U :\ - ((__GPIOx__) == (GPIOI))? 8U :\ - ((__GPIOx__) == (GPIOJ))? 9U : 10U) -#endif /* STM32F745xx || STM32F746xx || STM32F756xx || STM32F765xx || STM32F767xx || STM32F769xx || STM32F777xx || STM32F779xx || STM32F750xx */ - -#if defined (STM32F722xx) || defined (STM32F723xx) || defined (STM32F732xx) || defined (STM32F733xx) || defined (STM32F730xx) -#define GPIO_GET_INDEX(__GPIOx__) (uint8_t)(((__GPIOx__) == (GPIOA))? 0U :\ - ((__GPIOx__) == (GPIOB))? 1U :\ - ((__GPIOx__) == (GPIOC))? 2U :\ - ((__GPIOx__) == (GPIOD))? 3U :\ - ((__GPIOx__) == (GPIOE))? 4U :\ - ((__GPIOx__) == (GPIOF))? 5U :\ - ((__GPIOx__) == (GPIOG))? 6U :\ - ((__GPIOx__) == (GPIOH))? 7U : 8U) -#endif /* STM32F722xx || STM32F723xx || STM32F732xx || STM32F733xx || STM32F730xx */ -/** - * @} - */ - -#define IS_GPIO_PIN_AVAILABLE(__INSTANCE__,__PIN__) \ - ((((__INSTANCE__) == GPIOA) && (((__PIN__) & (GPIOA_PIN_AVAILABLE)) != 0) && (((__PIN__) | (GPIOA_PIN_AVAILABLE)) == (GPIOA_PIN_AVAILABLE))) || \ - (((__INSTANCE__) == GPIOB) && (((__PIN__) & (GPIOB_PIN_AVAILABLE)) != 0) && (((__PIN__) | (GPIOB_PIN_AVAILABLE)) == (GPIOB_PIN_AVAILABLE))) || \ - (((__INSTANCE__) == GPIOC) && (((__PIN__) & (GPIOC_PIN_AVAILABLE)) != 0) && (((__PIN__) | (GPIOC_PIN_AVAILABLE)) == (GPIOC_PIN_AVAILABLE))) || \ - (((__INSTANCE__) == GPIOD) && (((__PIN__) & (GPIOD_PIN_AVAILABLE)) != 0) && (((__PIN__) | (GPIOD_PIN_AVAILABLE)) == (GPIOD_PIN_AVAILABLE))) || \ - (((__INSTANCE__) == GPIOE) && (((__PIN__) & (GPIOE_PIN_AVAILABLE)) != 0) && (((__PIN__) | (GPIOE_PIN_AVAILABLE)) == (GPIOE_PIN_AVAILABLE))) || \ - (((__INSTANCE__) == GPIOF) && (((__PIN__) & (GPIOF_PIN_AVAILABLE)) != 0) && (((__PIN__) | (GPIOF_PIN_AVAILABLE)) == (GPIOF_PIN_AVAILABLE))) || \ - (((__INSTANCE__) == GPIOG) && (((__PIN__) & (GPIOG_PIN_AVAILABLE)) != 0) && (((__PIN__) | (GPIOG_PIN_AVAILABLE)) == (GPIOG_PIN_AVAILABLE))) || \ - (((__INSTANCE__) == GPIOI) && (((__PIN__) & (GPIOI_PIN_AVAILABLE)) != 0) && (((__PIN__) | (GPIOI_PIN_AVAILABLE)) == (GPIOI_PIN_AVAILABLE))) || \ - (((__INSTANCE__) == GPIOJ) && (((__PIN__) & (GPIOJ_PIN_AVAILABLE)) != 0) && (((__PIN__) | (GPIOJ_PIN_AVAILABLE)) == (GPIOJ_PIN_AVAILABLE))) || \ - (((__INSTANCE__) == GPIOK) && (((__PIN__) & (GPIOK_PIN_AVAILABLE)) != 0) && (((__PIN__) | (GPIOK_PIN_AVAILABLE)) == (GPIOK_PIN_AVAILABLE))) || \ - (((__INSTANCE__) == GPIOH) && (((__PIN__) & (GPIOH_PIN_AVAILABLE)) != 0) && (((__PIN__) | (GPIOH_PIN_AVAILABLE)) == (GPIOH_PIN_AVAILABLE)))) -/** @defgroup GPIOEx_IS_Alternat_function_selection GPIO Check Alternate Function - * @{ - */ -#if defined(STM32F756xx) || defined(STM32F746xx) || defined(STM32F750xx) -#define IS_GPIO_AF(AF) (((AF) == GPIO_AF0_RTC_50Hz) || ((AF) == GPIO_AF1_TIM1) || \ - ((AF) == GPIO_AF0_SWJ) || ((AF) == GPIO_AF0_TRACE) || \ - ((AF) == GPIO_AF0_MCO) || ((AF) == GPIO_AF1_TIM2) || \ - ((AF) == GPIO_AF2_TIM3) || ((AF) == GPIO_AF2_TIM4) || \ - ((AF) == GPIO_AF2_TIM5) || ((AF) == GPIO_AF3_TIM8) || \ - ((AF) == GPIO_AF3_TIM9) || ((AF) == GPIO_AF3_TIM10) || \ - ((AF) == GPIO_AF3_TIM11) || ((AF) == GPIO_AF3_LPTIM1) || \ - ((AF) == GPIO_AF3_CEC) || ((AF) == GPIO_AF4_CEC) || \ - ((AF) == GPIO_AF4_I2C1) || ((AF) == GPIO_AF4_I2C2) || \ - ((AF) == GPIO_AF4_I2C3) || ((AF) == GPIO_AF4_I2C4) || \ - ((AF) == GPIO_AF5_SPI1) || ((AF) == GPIO_AF5_SPI2) || \ - ((AF) == GPIO_AF5_SPI3) || ((AF) == GPIO_AF5_SPI4) || \ - ((AF) == GPIO_AF5_SPI5) || ((AF) == GPIO_AF5_SPI6) || \ - ((AF) == GPIO_AF6_SPI3) || ((AF) == GPIO_AF6_SAI1) || \ - ((AF) == GPIO_AF7_SPI3) || ((AF) == GPIO_AF7_SPI2) || \ - ((AF) == GPIO_AF7_USART1) || ((AF) == GPIO_AF7_USART2) || \ - ((AF) == GPIO_AF7_USART3) || ((AF) == GPIO_AF7_UART5) || \ - ((AF) == GPIO_AF7_SPDIFRX) || ((AF) == GPIO_AF8_SPDIFRX) || \ - ((AF) == GPIO_AF8_SAI2) || ((AF) == GPIO_AF8_USART6) || \ - ((AF) == GPIO_AF8_UART4) || ((AF) == GPIO_AF8_UART5) || \ - ((AF) == GPIO_AF8_UART7) || ((AF) == GPIO_AF8_UART8) || \ - ((AF) == GPIO_AF9_CAN1) || ((AF) == GPIO_AF9_CAN2) || \ - ((AF) == GPIO_AF9_TIM12) || ((AF) == GPIO_AF9_TIM12) || \ - ((AF) == GPIO_AF9_TIM14) || ((AF) == GPIO_AF9_QUADSPI) || \ - ((AF) == GPIO_AF9_LTDC) || ((AF) == GPIO_AF10_OTG_FS) || \ - ((AF) == GPIO_AF10_OTG_HS) || ((AF) == GPIO_AF10_SAI2) || \ - ((AF) == GPIO_AF10_QUADSPI) || ((AF) == GPIO_AF11_ETH) || \ - ((AF) == GPIO_AF12_OTG_HS_FS) || ((AF) == GPIO_AF12_SDMMC1) || \ - ((AF) == GPIO_AF12_FMC) || ((AF) == GPIO_AF15_EVENTOUT) || \ - ((AF) == GPIO_AF13_DCMI) || ((AF) == GPIO_AF14_LTDC)) -#elif defined(STM32F745xx) -#define IS_GPIO_AF(AF) (((AF) == GPIO_AF0_RTC_50Hz) || ((AF) == GPIO_AF1_TIM1) || \ - ((AF) == GPIO_AF0_SWJ) || ((AF) == GPIO_AF0_TRACE) || \ - ((AF) == GPIO_AF0_MCO) || ((AF) == GPIO_AF1_TIM2) || \ - ((AF) == GPIO_AF2_TIM3) || ((AF) == GPIO_AF2_TIM4) || \ - ((AF) == GPIO_AF2_TIM5) || ((AF) == GPIO_AF3_TIM8) || \ - ((AF) == GPIO_AF3_TIM9) || ((AF) == GPIO_AF3_TIM10) || \ - ((AF) == GPIO_AF3_TIM11) || ((AF) == GPIO_AF3_LPTIM1) || \ - ((AF) == GPIO_AF3_CEC) || ((AF) == GPIO_AF4_CEC) || \ - ((AF) == GPIO_AF4_I2C1) || ((AF) == GPIO_AF4_I2C2) || \ - ((AF) == GPIO_AF4_I2C3) || ((AF) == GPIO_AF4_I2C4) || \ - ((AF) == GPIO_AF5_SPI1) || ((AF) == GPIO_AF5_SPI2) || \ - ((AF) == GPIO_AF5_SPI3) || ((AF) == GPIO_AF5_SPI4) || \ - ((AF) == GPIO_AF5_SPI5) || ((AF) == GPIO_AF5_SPI6) || \ - ((AF) == GPIO_AF6_SPI3) || ((AF) == GPIO_AF6_SAI1) || \ - ((AF) == GPIO_AF7_SPI3) || ((AF) == GPIO_AF7_SPI2) || \ - ((AF) == GPIO_AF7_USART1) || ((AF) == GPIO_AF7_USART2) || \ - ((AF) == GPIO_AF7_USART3) || ((AF) == GPIO_AF7_UART5) || \ - ((AF) == GPIO_AF7_SPDIFRX) || ((AF) == GPIO_AF8_SPDIFRX) || \ - ((AF) == GPIO_AF8_SAI2) || ((AF) == GPIO_AF8_USART6) || \ - ((AF) == GPIO_AF8_UART4) || ((AF) == GPIO_AF8_UART5) || \ - ((AF) == GPIO_AF8_UART7) || ((AF) == GPIO_AF8_UART8) || \ - ((AF) == GPIO_AF9_CAN1) || ((AF) == GPIO_AF9_CAN2) || \ - ((AF) == GPIO_AF9_TIM12) || ((AF) == GPIO_AF9_TIM12) || \ - ((AF) == GPIO_AF9_TIM14) || ((AF) == GPIO_AF9_QUADSPI) || \ - ((AF) == GPIO_AF13_DCMI) || ((AF) == GPIO_AF10_OTG_FS) || \ - ((AF) == GPIO_AF10_OTG_HS) || ((AF) == GPIO_AF10_SAI2) || \ - ((AF) == GPIO_AF10_QUADSPI) || ((AF) == GPIO_AF11_ETH) || \ - ((AF) == GPIO_AF12_OTG_HS_FS) || ((AF) == GPIO_AF12_SDMMC1) || \ - ((AF) == GPIO_AF12_FMC) || ((AF) == GPIO_AF15_EVENTOUT)) -#elif defined(STM32F767xx) || defined(STM32F777xx) -#define IS_GPIO_AF(AF) (((AF) == GPIO_AF0_RTC_50Hz) || ((AF) == GPIO_AF1_TIM1) || \ - ((AF) == GPIO_AF0_SWJ) || ((AF) == GPIO_AF0_TRACE) || \ - ((AF) == GPIO_AF0_MCO) || ((AF) == GPIO_AF1_TIM2) || \ - ((AF) == GPIO_AF2_TIM3) || ((AF) == GPIO_AF2_TIM4) || \ - ((AF) == GPIO_AF2_TIM5) || ((AF) == GPIO_AF3_TIM8) || \ - ((AF) == GPIO_AF3_TIM9) || ((AF) == GPIO_AF3_TIM10) || \ - ((AF) == GPIO_AF3_TIM11) || ((AF) == GPIO_AF3_LPTIM1) || \ - ((AF) == GPIO_AF3_CEC) || ((AF) == GPIO_AF4_CEC) || \ - ((AF) == GPIO_AF4_I2C1) || ((AF) == GPIO_AF4_I2C2) || \ - ((AF) == GPIO_AF4_I2C3) || ((AF) == GPIO_AF4_I2C4) || \ - ((AF) == GPIO_AF5_SPI1) || ((AF) == GPIO_AF5_SPI2) || \ - ((AF) == GPIO_AF5_SPI3) || ((AF) == GPIO_AF5_SPI4) || \ - ((AF) == GPIO_AF5_SPI5) || ((AF) == GPIO_AF5_SPI6) || \ - ((AF) == GPIO_AF6_SPI3) || ((AF) == GPIO_AF6_SAI1) || \ - ((AF) == GPIO_AF7_SPI3) || ((AF) == GPIO_AF7_SPI2) || \ - ((AF) == GPIO_AF7_USART1) || ((AF) == GPIO_AF7_USART2) || \ - ((AF) == GPIO_AF7_USART3) || ((AF) == GPIO_AF7_UART5) || \ - ((AF) == GPIO_AF7_SPDIFRX) || ((AF) == GPIO_AF8_SPDIFRX) || \ - ((AF) == GPIO_AF8_SAI2) || ((AF) == GPIO_AF8_USART6) || \ - ((AF) == GPIO_AF8_UART4) || ((AF) == GPIO_AF8_UART5) || \ - ((AF) == GPIO_AF8_UART7) || ((AF) == GPIO_AF8_UART8) || \ - ((AF) == GPIO_AF9_CAN1) || ((AF) == GPIO_AF9_CAN2) || \ - ((AF) == GPIO_AF9_TIM12) || ((AF) == GPIO_AF9_TIM12) || \ - ((AF) == GPIO_AF9_TIM14) || ((AF) == GPIO_AF9_QUADSPI) || \ - ((AF) == GPIO_AF10_OTG_FS) || ((AF) == GPIO_AF9_LTDC) || \ - ((AF) == GPIO_AF10_OTG_HS) || ((AF) == GPIO_AF10_SAI2) || \ - ((AF) == GPIO_AF10_QUADSPI) || ((AF) == GPIO_AF11_ETH) || \ - ((AF) == GPIO_AF10_SDMMC2) || ((AF) == GPIO_AF11_SDMMC2) || \ - ((AF) == GPIO_AF11_CAN3) || ((AF) == GPIO_AF12_OTG_HS_FS) || \ - ((AF) == GPIO_AF12_SDMMC1) || ((AF) == GPIO_AF12_FMC) || \ - ((AF) == GPIO_AF15_EVENTOUT) || ((AF) == GPIO_AF13_DCMI) || \ - ((AF) == GPIO_AF14_LTDC)) -#elif defined(STM32F769xx) || defined(STM32F779xx) -#define IS_GPIO_AF(AF) (((AF) == GPIO_AF0_RTC_50Hz) || ((AF) == GPIO_AF1_TIM1) || \ - ((AF) == GPIO_AF0_SWJ) || ((AF) == GPIO_AF0_TRACE) || \ - ((AF) == GPIO_AF0_MCO) || ((AF) == GPIO_AF1_TIM2) || \ - ((AF) == GPIO_AF2_TIM3) || ((AF) == GPIO_AF2_TIM4) || \ - ((AF) == GPIO_AF2_TIM5) || ((AF) == GPIO_AF3_TIM8) || \ - ((AF) == GPIO_AF3_TIM9) || ((AF) == GPIO_AF3_TIM10) || \ - ((AF) == GPIO_AF3_TIM11) || ((AF) == GPIO_AF3_LPTIM1) || \ - ((AF) == GPIO_AF3_CEC) || ((AF) == GPIO_AF4_CEC) || \ - ((AF) == GPIO_AF4_I2C1) || ((AF) == GPIO_AF4_I2C2) || \ - ((AF) == GPIO_AF4_I2C3) || ((AF) == GPIO_AF4_I2C4) || \ - ((AF) == GPIO_AF5_SPI1) || ((AF) == GPIO_AF5_SPI2) || \ - ((AF) == GPIO_AF5_SPI3) || ((AF) == GPIO_AF5_SPI4) || \ - ((AF) == GPIO_AF5_SPI5) || ((AF) == GPIO_AF5_SPI6) || \ - ((AF) == GPIO_AF6_SPI3) || ((AF) == GPIO_AF6_SAI1) || \ - ((AF) == GPIO_AF7_SPI3) || ((AF) == GPIO_AF7_SPI2) || \ - ((AF) == GPIO_AF7_USART1) || ((AF) == GPIO_AF7_USART2) || \ - ((AF) == GPIO_AF7_USART3) || ((AF) == GPIO_AF7_UART5) || \ - ((AF) == GPIO_AF7_SPDIFRX) || ((AF) == GPIO_AF8_SPDIFRX) || \ - ((AF) == GPIO_AF8_SAI2) || ((AF) == GPIO_AF8_USART6) || \ - ((AF) == GPIO_AF8_UART4) || ((AF) == GPIO_AF8_UART5) || \ - ((AF) == GPIO_AF8_UART7) || ((AF) == GPIO_AF8_UART8) || \ - ((AF) == GPIO_AF9_CAN1) || ((AF) == GPIO_AF9_CAN2) || \ - ((AF) == GPIO_AF9_TIM12) || ((AF) == GPIO_AF9_TIM12) || \ - ((AF) == GPIO_AF9_TIM14) || ((AF) == GPIO_AF9_QUADSPI) || \ - ((AF) == GPIO_AF9_LTDC) || ((AF) == GPIO_AF10_OTG_FS) || \ - ((AF) == GPIO_AF10_OTG_HS) || ((AF) == GPIO_AF10_SAI2) || \ - ((AF) == GPIO_AF10_QUADSPI) || ((AF) == GPIO_AF11_ETH) || \ - ((AF) == GPIO_AF10_SDMMC2) || ((AF) == GPIO_AF11_SDMMC2) || \ - ((AF) == GPIO_AF11_CAN3) || ((AF) == GPIO_AF12_OTG_HS_FS) || \ - ((AF) == GPIO_AF12_SDMMC1) || ((AF) == GPIO_AF12_FMC) || \ - ((AF) == GPIO_AF15_EVENTOUT) || ((AF) == GPIO_AF13_DCMI) || \ - ((AF) == GPIO_AF14_LTDC) || ((AF) == GPIO_AF13_DSI)) -#elif defined(STM32F765xx) -#define IS_GPIO_AF(AF) (((AF) == GPIO_AF0_RTC_50Hz) || ((AF) == GPIO_AF1_TIM1) || \ - ((AF) == GPIO_AF0_SWJ) || ((AF) == GPIO_AF0_TRACE) || \ - ((AF) == GPIO_AF0_MCO) || ((AF) == GPIO_AF1_TIM2) || \ - ((AF) == GPIO_AF2_TIM3) || ((AF) == GPIO_AF2_TIM4) || \ - ((AF) == GPIO_AF2_TIM5) || ((AF) == GPIO_AF3_TIM8) || \ - ((AF) == GPIO_AF3_TIM9) || ((AF) == GPIO_AF3_TIM10) || \ - ((AF) == GPIO_AF3_TIM11) || ((AF) == GPIO_AF3_LPTIM1) || \ - ((AF) == GPIO_AF3_CEC) || ((AF) == GPIO_AF4_CEC) || \ - ((AF) == GPIO_AF4_I2C1) || ((AF) == GPIO_AF4_I2C2) || \ - ((AF) == GPIO_AF4_I2C3) || ((AF) == GPIO_AF4_I2C4) || \ - ((AF) == GPIO_AF5_SPI1) || ((AF) == GPIO_AF5_SPI2) || \ - ((AF) == GPIO_AF5_SPI3) || ((AF) == GPIO_AF5_SPI4) || \ - ((AF) == GPIO_AF5_SPI5) || ((AF) == GPIO_AF5_SPI6) || \ - ((AF) == GPIO_AF6_SPI3) || ((AF) == GPIO_AF6_SAI1) || \ - ((AF) == GPIO_AF7_SPI3) || ((AF) == GPIO_AF7_SPI2) || \ - ((AF) == GPIO_AF7_USART1) || ((AF) == GPIO_AF7_USART2) || \ - ((AF) == GPIO_AF7_USART3) || ((AF) == GPIO_AF7_UART5) || \ - ((AF) == GPIO_AF7_SPDIFRX) || ((AF) == GPIO_AF8_SPDIFRX) || \ - ((AF) == GPIO_AF8_SAI2) || ((AF) == GPIO_AF8_USART6) || \ - ((AF) == GPIO_AF8_UART4) || ((AF) == GPIO_AF8_UART5) || \ - ((AF) == GPIO_AF8_UART7) || ((AF) == GPIO_AF8_UART8) || \ - ((AF) == GPIO_AF9_CAN1) || ((AF) == GPIO_AF9_CAN2) || \ - ((AF) == GPIO_AF9_TIM12) || ((AF) == GPIO_AF9_TIM12) || \ - ((AF) == GPIO_AF9_TIM14) || ((AF) == GPIO_AF9_QUADSPI) || \ - ((AF) == GPIO_AF10_OTG_HS) || ((AF) == GPIO_AF10_SAI2) || \ - ((AF) == GPIO_AF10_QUADSPI) || ((AF) == GPIO_AF11_ETH) || \ - ((AF) == GPIO_AF10_SDMMC2) || ((AF) == GPIO_AF11_SDMMC2) || \ - ((AF) == GPIO_AF11_CAN3) || ((AF) == GPIO_AF12_OTG_HS_FS) || \ - ((AF) == GPIO_AF12_SDMMC1) || ((AF) == GPIO_AF12_FMC) || \ - ((AF) == GPIO_AF15_EVENTOUT) || ((AF) == GPIO_AF13_DCMI) || \ - ((AF) == GPIO_AF10_OTG_FS)) -#elif defined (STM32F722xx) || defined (STM32F723xx) || defined (STM32F732xx) || defined (STM32F733xx) || defined (STM32F730xx) -#define IS_GPIO_AF(AF) (((AF) == GPIO_AF0_RTC_50Hz) || ((AF) == GPIO_AF1_TIM1) || \ - ((AF) == GPIO_AF0_SWJ) || ((AF) == GPIO_AF0_TRACE) || \ - ((AF) == GPIO_AF0_MCO) || ((AF) == GPIO_AF1_TIM2) || \ - ((AF) == GPIO_AF2_TIM3) || ((AF) == GPIO_AF2_TIM4) || \ - ((AF) == GPIO_AF2_TIM5) || ((AF) == GPIO_AF3_TIM8) || \ - ((AF) == GPIO_AF3_TIM9) || ((AF) == GPIO_AF3_TIM10) || \ - ((AF) == GPIO_AF3_TIM11) || ((AF) == GPIO_AF3_LPTIM1) || \ - ((AF) == GPIO_AF4_I2C1) || ((AF) == GPIO_AF4_I2C2) || \ - ((AF) == GPIO_AF4_I2C3) || ((AF) == GPIO_AF5_SPI1) || \ - ((AF) == GPIO_AF5_SPI2) || ((AF) == GPIO_AF5_SPI3) || \ - ((AF) == GPIO_AF5_SPI4) || ((AF) == GPIO_AF5_SPI5) || \ - ((AF) == GPIO_AF6_SPI3) || ((AF) == GPIO_AF6_SAI1) || \ - ((AF) == GPIO_AF7_SPI3) || ((AF) == GPIO_AF7_SPI2) || \ - ((AF) == GPIO_AF7_USART1) || ((AF) == GPIO_AF7_USART2) || \ - ((AF) == GPIO_AF7_USART3) || ((AF) == GPIO_AF7_UART5) || \ - ((AF) == GPIO_AF8_SAI2) || ((AF) == GPIO_AF8_USART6) || \ - ((AF) == GPIO_AF8_UART4) || ((AF) == GPIO_AF8_UART5) || \ - ((AF) == GPIO_AF8_UART7) || ((AF) == GPIO_AF8_UART8) || \ - ((AF) == GPIO_AF9_CAN1) || ((AF) == GPIO_AF9_TIM12) || \ - ((AF) == GPIO_AF9_TIM12) || ((AF) == GPIO_AF9_TIM14) || \ - ((AF) == GPIO_AF9_QUADSPI) || ((AF) == GPIO_AF10_OTG_HS) || \ - ((AF) == GPIO_AF10_SAI2) || ((AF) == GPIO_AF10_QUADSPI) || \ - ((AF) == GPIO_AF10_SDMMC2) || ((AF) == GPIO_AF11_SDMMC2) || \ - ((AF) == GPIO_AF12_OTG_HS_FS) || ((AF) == GPIO_AF12_SDMMC1) || \ - ((AF) == GPIO_AF12_FMC) || ((AF) == GPIO_AF15_EVENTOUT) || \ - ((AF) == GPIO_AF10_OTG_FS)) -#endif /* STM32F756xx || STM32F746xx || STM32F750xx */ -/** - * @} - */ - -/** - * @} - */ - -/* Private functions ---------------------------------------------------------*/ -/** @defgroup GPIOEx_Private_Functions GPIO Private Functions - * @{ - */ - -/** - * @} - */ - -/** - * @} - */ - -/** - * @} - */ - -#ifdef __cplusplus -} -#endif - -#endif /* __STM32F7xx_HAL_GPIO_EX_H */ - -/************************ (C) COPYRIGHT STMicroelectronics *****END OF FILE****/ diff --git a/test_dma/Drivers/STM32F7xx_HAL_Driver/Inc/stm32f7xx_hal_i2c.h b/test_dma/Drivers/STM32F7xx_HAL_Driver/Inc/stm32f7xx_hal_i2c.h deleted file mode 100644 index f09e057..0000000 --- a/test_dma/Drivers/STM32F7xx_HAL_Driver/Inc/stm32f7xx_hal_i2c.h +++ /dev/null @@ -1,782 +0,0 @@ -/** - ****************************************************************************** - * @file stm32f7xx_hal_i2c.h - * @author MCD Application Team - * @brief Header file of I2C HAL module. - ****************************************************************************** - * @attention - * - *

© Copyright (c) 2017 STMicroelectronics. - * All rights reserved.

- * - * This software component is licensed by ST under BSD 3-Clause license, - * the "License"; You may not use this file except in compliance with the - * License. You may obtain a copy of the License at: - * opensource.org/licenses/BSD-3-Clause - * - ****************************************************************************** - */ - -/* Define to prevent recursive inclusion -------------------------------------*/ -#ifndef STM32F7xx_HAL_I2C_H -#define STM32F7xx_HAL_I2C_H - -#ifdef __cplusplus -extern "C" { -#endif - -/* Includes ------------------------------------------------------------------*/ -#include "stm32f7xx_hal_def.h" - -/** @addtogroup STM32F7xx_HAL_Driver - * @{ - */ - -/** @addtogroup I2C - * @{ - */ - -/* Exported types ------------------------------------------------------------*/ -/** @defgroup I2C_Exported_Types I2C Exported Types - * @{ - */ - -/** @defgroup I2C_Configuration_Structure_definition I2C Configuration Structure definition - * @brief I2C Configuration Structure definition - * @{ - */ -typedef struct -{ - uint32_t Timing; /*!< Specifies the I2C_TIMINGR_register value. - This parameter calculated by referring to I2C initialization - section in Reference manual */ - - uint32_t OwnAddress1; /*!< Specifies the first device own address. - This parameter can be a 7-bit or 10-bit address. */ - - uint32_t AddressingMode; /*!< Specifies if 7-bit or 10-bit addressing mode is selected. - This parameter can be a value of @ref I2C_ADDRESSING_MODE */ - - uint32_t DualAddressMode; /*!< Specifies if dual addressing mode is selected. - This parameter can be a value of @ref I2C_DUAL_ADDRESSING_MODE */ - - uint32_t OwnAddress2; /*!< Specifies the second device own address if dual addressing mode is selected - This parameter can be a 7-bit address. */ - - uint32_t OwnAddress2Masks; /*!< Specifies the acknowledge mask address second device own address if dual addressing mode is selected - This parameter can be a value of @ref I2C_OWN_ADDRESS2_MASKS */ - - uint32_t GeneralCallMode; /*!< Specifies if general call mode is selected. - This parameter can be a value of @ref I2C_GENERAL_CALL_ADDRESSING_MODE */ - - uint32_t NoStretchMode; /*!< Specifies if nostretch mode is selected. - This parameter can be a value of @ref I2C_NOSTRETCH_MODE */ - -} I2C_InitTypeDef; - -/** - * @} - */ - -/** @defgroup HAL_state_structure_definition HAL state structure definition - * @brief HAL State structure definition - * @note HAL I2C State value coding follow below described bitmap :\n - * b7-b6 Error information\n - * 00 : No Error\n - * 01 : Abort (Abort user request on going)\n - * 10 : Timeout\n - * 11 : Error\n - * b5 Peripheral initialization status\n - * 0 : Reset (peripheral not initialized)\n - * 1 : Init done (peripheral initialized and ready to use. HAL I2C Init function called)\n - * b4 (not used)\n - * x : Should be set to 0\n - * b3\n - * 0 : Ready or Busy (No Listen mode ongoing)\n - * 1 : Listen (peripheral in Address Listen Mode)\n - * b2 Intrinsic process state\n - * 0 : Ready\n - * 1 : Busy (peripheral busy with some configuration or internal operations)\n - * b1 Rx state\n - * 0 : Ready (no Rx operation ongoing)\n - * 1 : Busy (Rx operation ongoing)\n - * b0 Tx state\n - * 0 : Ready (no Tx operation ongoing)\n - * 1 : Busy (Tx operation ongoing) - * @{ - */ -typedef enum -{ - HAL_I2C_STATE_RESET = 0x00U, /*!< Peripheral is not yet Initialized */ - HAL_I2C_STATE_READY = 0x20U, /*!< Peripheral Initialized and ready for use */ - HAL_I2C_STATE_BUSY = 0x24U, /*!< An internal process is ongoing */ - HAL_I2C_STATE_BUSY_TX = 0x21U, /*!< Data Transmission process is ongoing */ - HAL_I2C_STATE_BUSY_RX = 0x22U, /*!< Data Reception process is ongoing */ - HAL_I2C_STATE_LISTEN = 0x28U, /*!< Address Listen Mode is ongoing */ - HAL_I2C_STATE_BUSY_TX_LISTEN = 0x29U, /*!< Address Listen Mode and Data Transmission - process is ongoing */ - HAL_I2C_STATE_BUSY_RX_LISTEN = 0x2AU, /*!< Address Listen Mode and Data Reception - process is ongoing */ - HAL_I2C_STATE_ABORT = 0x60U, /*!< Abort user request ongoing */ - HAL_I2C_STATE_TIMEOUT = 0xA0U, /*!< Timeout state */ - HAL_I2C_STATE_ERROR = 0xE0U /*!< Error */ - -} HAL_I2C_StateTypeDef; - -/** - * @} - */ - -/** @defgroup HAL_mode_structure_definition HAL mode structure definition - * @brief HAL Mode structure definition - * @note HAL I2C Mode value coding follow below described bitmap :\n - * b7 (not used)\n - * x : Should be set to 0\n - * b6\n - * 0 : None\n - * 1 : Memory (HAL I2C communication is in Memory Mode)\n - * b5\n - * 0 : None\n - * 1 : Slave (HAL I2C communication is in Slave Mode)\n - * b4\n - * 0 : None\n - * 1 : Master (HAL I2C communication is in Master Mode)\n - * b3-b2-b1-b0 (not used)\n - * xxxx : Should be set to 0000 - * @{ - */ -typedef enum -{ - HAL_I2C_MODE_NONE = 0x00U, /*!< No I2C communication on going */ - HAL_I2C_MODE_MASTER = 0x10U, /*!< I2C communication is in Master Mode */ - HAL_I2C_MODE_SLAVE = 0x20U, /*!< I2C communication is in Slave Mode */ - HAL_I2C_MODE_MEM = 0x40U /*!< I2C communication is in Memory Mode */ - -} HAL_I2C_ModeTypeDef; - -/** - * @} - */ - -/** @defgroup I2C_Error_Code_definition I2C Error Code definition - * @brief I2C Error Code definition - * @{ - */ -#define HAL_I2C_ERROR_NONE (0x00000000U) /*!< No error */ -#define HAL_I2C_ERROR_BERR (0x00000001U) /*!< BERR error */ -#define HAL_I2C_ERROR_ARLO (0x00000002U) /*!< ARLO error */ -#define HAL_I2C_ERROR_AF (0x00000004U) /*!< ACKF error */ -#define HAL_I2C_ERROR_OVR (0x00000008U) /*!< OVR error */ -#define HAL_I2C_ERROR_DMA (0x00000010U) /*!< DMA transfer error */ -#define HAL_I2C_ERROR_TIMEOUT (0x00000020U) /*!< Timeout error */ -#define HAL_I2C_ERROR_SIZE (0x00000040U) /*!< Size Management error */ -#define HAL_I2C_ERROR_DMA_PARAM (0x00000080U) /*!< DMA Parameter Error */ -#if (USE_HAL_I2C_REGISTER_CALLBACKS == 1) -#define HAL_I2C_ERROR_INVALID_CALLBACK (0x00000100U) /*!< Invalid Callback error */ -#endif /* USE_HAL_I2C_REGISTER_CALLBACKS */ -#define HAL_I2C_ERROR_INVALID_PARAM (0x00000200U) /*!< Invalid Parameters error */ -/** - * @} - */ - -/** @defgroup I2C_handle_Structure_definition I2C handle Structure definition - * @brief I2C handle Structure definition - * @{ - */ -typedef struct __I2C_HandleTypeDef -{ - I2C_TypeDef *Instance; /*!< I2C registers base address */ - - I2C_InitTypeDef Init; /*!< I2C communication parameters */ - - uint8_t *pBuffPtr; /*!< Pointer to I2C transfer buffer */ - - uint16_t XferSize; /*!< I2C transfer size */ - - __IO uint16_t XferCount; /*!< I2C transfer counter */ - - __IO uint32_t XferOptions; /*!< I2C sequantial transfer options, this parameter can - be a value of @ref I2C_XFEROPTIONS */ - - __IO uint32_t PreviousState; /*!< I2C communication Previous state */ - - HAL_StatusTypeDef(*XferISR)(struct __I2C_HandleTypeDef *hi2c, uint32_t ITFlags, uint32_t ITSources); /*!< I2C transfer IRQ handler function pointer */ - - DMA_HandleTypeDef *hdmatx; /*!< I2C Tx DMA handle parameters */ - - DMA_HandleTypeDef *hdmarx; /*!< I2C Rx DMA handle parameters */ - - HAL_LockTypeDef Lock; /*!< I2C locking object */ - - __IO HAL_I2C_StateTypeDef State; /*!< I2C communication state */ - - __IO HAL_I2C_ModeTypeDef Mode; /*!< I2C communication mode */ - - __IO uint32_t ErrorCode; /*!< I2C Error code */ - - __IO uint32_t AddrEventCount; /*!< I2C Address Event counter */ - -#if (USE_HAL_I2C_REGISTER_CALLBACKS == 1) - void (* MasterTxCpltCallback)(struct __I2C_HandleTypeDef *hi2c); /*!< I2C Master Tx Transfer completed callback */ - void (* MasterRxCpltCallback)(struct __I2C_HandleTypeDef *hi2c); /*!< I2C Master Rx Transfer completed callback */ - void (* SlaveTxCpltCallback)(struct __I2C_HandleTypeDef *hi2c); /*!< I2C Slave Tx Transfer completed callback */ - void (* SlaveRxCpltCallback)(struct __I2C_HandleTypeDef *hi2c); /*!< I2C Slave Rx Transfer completed callback */ - void (* ListenCpltCallback)(struct __I2C_HandleTypeDef *hi2c); /*!< I2C Listen Complete callback */ - void (* MemTxCpltCallback)(struct __I2C_HandleTypeDef *hi2c); /*!< I2C Memory Tx Transfer completed callback */ - void (* MemRxCpltCallback)(struct __I2C_HandleTypeDef *hi2c); /*!< I2C Memory Rx Transfer completed callback */ - void (* ErrorCallback)(struct __I2C_HandleTypeDef *hi2c); /*!< I2C Error callback */ - void (* AbortCpltCallback)(struct __I2C_HandleTypeDef *hi2c); /*!< I2C Abort callback */ - - void (* AddrCallback)(struct __I2C_HandleTypeDef *hi2c, uint8_t TransferDirection, uint16_t AddrMatchCode); /*!< I2C Slave Address Match callback */ - - void (* MspInitCallback)(struct __I2C_HandleTypeDef *hi2c); /*!< I2C Msp Init callback */ - void (* MspDeInitCallback)(struct __I2C_HandleTypeDef *hi2c); /*!< I2C Msp DeInit callback */ - -#endif /* USE_HAL_I2C_REGISTER_CALLBACKS */ -} I2C_HandleTypeDef; - -#if (USE_HAL_I2C_REGISTER_CALLBACKS == 1) -/** - * @brief HAL I2C Callback ID enumeration definition - */ -typedef enum -{ - HAL_I2C_MASTER_TX_COMPLETE_CB_ID = 0x00U, /*!< I2C Master Tx Transfer completed callback ID */ - HAL_I2C_MASTER_RX_COMPLETE_CB_ID = 0x01U, /*!< I2C Master Rx Transfer completed callback ID */ - HAL_I2C_SLAVE_TX_COMPLETE_CB_ID = 0x02U, /*!< I2C Slave Tx Transfer completed callback ID */ - HAL_I2C_SLAVE_RX_COMPLETE_CB_ID = 0x03U, /*!< I2C Slave Rx Transfer completed callback ID */ - HAL_I2C_LISTEN_COMPLETE_CB_ID = 0x04U, /*!< I2C Listen Complete callback ID */ - HAL_I2C_MEM_TX_COMPLETE_CB_ID = 0x05U, /*!< I2C Memory Tx Transfer callback ID */ - HAL_I2C_MEM_RX_COMPLETE_CB_ID = 0x06U, /*!< I2C Memory Rx Transfer completed callback ID */ - HAL_I2C_ERROR_CB_ID = 0x07U, /*!< I2C Error callback ID */ - HAL_I2C_ABORT_CB_ID = 0x08U, /*!< I2C Abort callback ID */ - - HAL_I2C_MSPINIT_CB_ID = 0x09U, /*!< I2C Msp Init callback ID */ - HAL_I2C_MSPDEINIT_CB_ID = 0x0AU /*!< I2C Msp DeInit callback ID */ - -} HAL_I2C_CallbackIDTypeDef; - -/** - * @brief HAL I2C Callback pointer definition - */ -typedef void (*pI2C_CallbackTypeDef)(I2C_HandleTypeDef *hi2c); /*!< pointer to an I2C callback function */ -typedef void (*pI2C_AddrCallbackTypeDef)(I2C_HandleTypeDef *hi2c, uint8_t TransferDirection, uint16_t AddrMatchCode); /*!< pointer to an I2C Address Match callback function */ - -#endif /* USE_HAL_I2C_REGISTER_CALLBACKS */ -/** - * @} - */ - -/** - * @} - */ -/* Exported constants --------------------------------------------------------*/ - -/** @defgroup I2C_Exported_Constants I2C Exported Constants - * @{ - */ - -/** @defgroup I2C_XFEROPTIONS I2C Sequential Transfer Options - * @{ - */ -#define I2C_FIRST_FRAME ((uint32_t)I2C_SOFTEND_MODE) -#define I2C_FIRST_AND_NEXT_FRAME ((uint32_t)(I2C_RELOAD_MODE | I2C_SOFTEND_MODE)) -#define I2C_NEXT_FRAME ((uint32_t)(I2C_RELOAD_MODE | I2C_SOFTEND_MODE)) -#define I2C_FIRST_AND_LAST_FRAME ((uint32_t)I2C_AUTOEND_MODE) -#define I2C_LAST_FRAME ((uint32_t)I2C_AUTOEND_MODE) -#define I2C_LAST_FRAME_NO_STOP ((uint32_t)I2C_SOFTEND_MODE) - -/* List of XferOptions in usage of : - * 1- Restart condition in all use cases (direction change or not) - */ -#define I2C_OTHER_FRAME (0x000000AAU) -#define I2C_OTHER_AND_LAST_FRAME (0x0000AA00U) -/** - * @} - */ - -/** @defgroup I2C_ADDRESSING_MODE I2C Addressing Mode - * @{ - */ -#define I2C_ADDRESSINGMODE_7BIT (0x00000001U) -#define I2C_ADDRESSINGMODE_10BIT (0x00000002U) -/** - * @} - */ - -/** @defgroup I2C_DUAL_ADDRESSING_MODE I2C Dual Addressing Mode - * @{ - */ -#define I2C_DUALADDRESS_DISABLE (0x00000000U) -#define I2C_DUALADDRESS_ENABLE I2C_OAR2_OA2EN -/** - * @} - */ - -/** @defgroup I2C_OWN_ADDRESS2_MASKS I2C Own Address2 Masks - * @{ - */ -#define I2C_OA2_NOMASK ((uint8_t)0x00U) -#define I2C_OA2_MASK01 ((uint8_t)0x01U) -#define I2C_OA2_MASK02 ((uint8_t)0x02U) -#define I2C_OA2_MASK03 ((uint8_t)0x03U) -#define I2C_OA2_MASK04 ((uint8_t)0x04U) -#define I2C_OA2_MASK05 ((uint8_t)0x05U) -#define I2C_OA2_MASK06 ((uint8_t)0x06U) -#define I2C_OA2_MASK07 ((uint8_t)0x07U) -/** - * @} - */ - -/** @defgroup I2C_GENERAL_CALL_ADDRESSING_MODE I2C General Call Addressing Mode - * @{ - */ -#define I2C_GENERALCALL_DISABLE (0x00000000U) -#define I2C_GENERALCALL_ENABLE I2C_CR1_GCEN -/** - * @} - */ - -/** @defgroup I2C_NOSTRETCH_MODE I2C No-Stretch Mode - * @{ - */ -#define I2C_NOSTRETCH_DISABLE (0x00000000U) -#define I2C_NOSTRETCH_ENABLE I2C_CR1_NOSTRETCH -/** - * @} - */ - -/** @defgroup I2C_MEMORY_ADDRESS_SIZE I2C Memory Address Size - * @{ - */ -#define I2C_MEMADD_SIZE_8BIT (0x00000001U) -#define I2C_MEMADD_SIZE_16BIT (0x00000002U) -/** - * @} - */ - -/** @defgroup I2C_XFERDIRECTION I2C Transfer Direction Master Point of View - * @{ - */ -#define I2C_DIRECTION_TRANSMIT (0x00000000U) -#define I2C_DIRECTION_RECEIVE (0x00000001U) -/** - * @} - */ - -/** @defgroup I2C_RELOAD_END_MODE I2C Reload End Mode - * @{ - */ -#define I2C_RELOAD_MODE I2C_CR2_RELOAD -#define I2C_AUTOEND_MODE I2C_CR2_AUTOEND -#define I2C_SOFTEND_MODE (0x00000000U) -/** - * @} - */ - -/** @defgroup I2C_START_STOP_MODE I2C Start or Stop Mode - * @{ - */ -#define I2C_NO_STARTSTOP (0x00000000U) -#define I2C_GENERATE_STOP (uint32_t)(0x80000000U | I2C_CR2_STOP) -#define I2C_GENERATE_START_READ (uint32_t)(0x80000000U | I2C_CR2_START | I2C_CR2_RD_WRN) -#define I2C_GENERATE_START_WRITE (uint32_t)(0x80000000U | I2C_CR2_START) -/** - * @} - */ - -/** @defgroup I2C_Interrupt_configuration_definition I2C Interrupt configuration definition - * @brief I2C Interrupt definition - * Elements values convention: 0xXXXXXXXX - * - XXXXXXXX : Interrupt control mask - * @{ - */ -#define I2C_IT_ERRI I2C_CR1_ERRIE -#define I2C_IT_TCI I2C_CR1_TCIE -#define I2C_IT_STOPI I2C_CR1_STOPIE -#define I2C_IT_NACKI I2C_CR1_NACKIE -#define I2C_IT_ADDRI I2C_CR1_ADDRIE -#define I2C_IT_RXI I2C_CR1_RXIE -#define I2C_IT_TXI I2C_CR1_TXIE -/** - * @} - */ - -/** @defgroup I2C_Flag_definition I2C Flag definition - * @{ - */ -#define I2C_FLAG_TXE I2C_ISR_TXE -#define I2C_FLAG_TXIS I2C_ISR_TXIS -#define I2C_FLAG_RXNE I2C_ISR_RXNE -#define I2C_FLAG_ADDR I2C_ISR_ADDR -#define I2C_FLAG_AF I2C_ISR_NACKF -#define I2C_FLAG_STOPF I2C_ISR_STOPF -#define I2C_FLAG_TC I2C_ISR_TC -#define I2C_FLAG_TCR I2C_ISR_TCR -#define I2C_FLAG_BERR I2C_ISR_BERR -#define I2C_FLAG_ARLO I2C_ISR_ARLO -#define I2C_FLAG_OVR I2C_ISR_OVR -#define I2C_FLAG_PECERR I2C_ISR_PECERR -#define I2C_FLAG_TIMEOUT I2C_ISR_TIMEOUT -#define I2C_FLAG_ALERT I2C_ISR_ALERT -#define I2C_FLAG_BUSY I2C_ISR_BUSY -#define I2C_FLAG_DIR I2C_ISR_DIR -/** - * @} - */ - -/** - * @} - */ - -/* Exported macros -----------------------------------------------------------*/ - -/** @defgroup I2C_Exported_Macros I2C Exported Macros - * @{ - */ - -/** @brief Reset I2C handle state. - * @param __HANDLE__ specifies the I2C Handle. - * @retval None - */ -#if (USE_HAL_I2C_REGISTER_CALLBACKS == 1) -#define __HAL_I2C_RESET_HANDLE_STATE(__HANDLE__) do{ \ - (__HANDLE__)->State = HAL_I2C_STATE_RESET; \ - (__HANDLE__)->MspInitCallback = NULL; \ - (__HANDLE__)->MspDeInitCallback = NULL; \ - } while(0) -#else -#define __HAL_I2C_RESET_HANDLE_STATE(__HANDLE__) ((__HANDLE__)->State = HAL_I2C_STATE_RESET) -#endif - -/** @brief Enable the specified I2C interrupt. - * @param __HANDLE__ specifies the I2C Handle. - * @param __INTERRUPT__ specifies the interrupt source to enable. - * This parameter can be one of the following values: - * @arg @ref I2C_IT_ERRI Errors interrupt enable - * @arg @ref I2C_IT_TCI Transfer complete interrupt enable - * @arg @ref I2C_IT_STOPI STOP detection interrupt enable - * @arg @ref I2C_IT_NACKI NACK received interrupt enable - * @arg @ref I2C_IT_ADDRI Address match interrupt enable - * @arg @ref I2C_IT_RXI RX interrupt enable - * @arg @ref I2C_IT_TXI TX interrupt enable - * - * @retval None - */ -#define __HAL_I2C_ENABLE_IT(__HANDLE__, __INTERRUPT__) ((__HANDLE__)->Instance->CR1 |= (__INTERRUPT__)) - -/** @brief Disable the specified I2C interrupt. - * @param __HANDLE__ specifies the I2C Handle. - * @param __INTERRUPT__ specifies the interrupt source to disable. - * This parameter can be one of the following values: - * @arg @ref I2C_IT_ERRI Errors interrupt enable - * @arg @ref I2C_IT_TCI Transfer complete interrupt enable - * @arg @ref I2C_IT_STOPI STOP detection interrupt enable - * @arg @ref I2C_IT_NACKI NACK received interrupt enable - * @arg @ref I2C_IT_ADDRI Address match interrupt enable - * @arg @ref I2C_IT_RXI RX interrupt enable - * @arg @ref I2C_IT_TXI TX interrupt enable - * - * @retval None - */ -#define __HAL_I2C_DISABLE_IT(__HANDLE__, __INTERRUPT__) ((__HANDLE__)->Instance->CR1 &= (~(__INTERRUPT__))) - -/** @brief Check whether the specified I2C interrupt source is enabled or not. - * @param __HANDLE__ specifies the I2C Handle. - * @param __INTERRUPT__ specifies the I2C interrupt source to check. - * This parameter can be one of the following values: - * @arg @ref I2C_IT_ERRI Errors interrupt enable - * @arg @ref I2C_IT_TCI Transfer complete interrupt enable - * @arg @ref I2C_IT_STOPI STOP detection interrupt enable - * @arg @ref I2C_IT_NACKI NACK received interrupt enable - * @arg @ref I2C_IT_ADDRI Address match interrupt enable - * @arg @ref I2C_IT_RXI RX interrupt enable - * @arg @ref I2C_IT_TXI TX interrupt enable - * - * @retval The new state of __INTERRUPT__ (SET or RESET). - */ -#define __HAL_I2C_GET_IT_SOURCE(__HANDLE__, __INTERRUPT__) ((((__HANDLE__)->Instance->CR1 & (__INTERRUPT__)) == (__INTERRUPT__)) ? SET : RESET) - -/** @brief Check whether the specified I2C flag is set or not. - * @param __HANDLE__ specifies the I2C Handle. - * @param __FLAG__ specifies the flag to check. - * This parameter can be one of the following values: - * @arg @ref I2C_FLAG_TXE Transmit data register empty - * @arg @ref I2C_FLAG_TXIS Transmit interrupt status - * @arg @ref I2C_FLAG_RXNE Receive data register not empty - * @arg @ref I2C_FLAG_ADDR Address matched (slave mode) - * @arg @ref I2C_FLAG_AF Acknowledge failure received flag - * @arg @ref I2C_FLAG_STOPF STOP detection flag - * @arg @ref I2C_FLAG_TC Transfer complete (master mode) - * @arg @ref I2C_FLAG_TCR Transfer complete reload - * @arg @ref I2C_FLAG_BERR Bus error - * @arg @ref I2C_FLAG_ARLO Arbitration lost - * @arg @ref I2C_FLAG_OVR Overrun/Underrun - * @arg @ref I2C_FLAG_PECERR PEC error in reception - * @arg @ref I2C_FLAG_TIMEOUT Timeout or Tlow detection flag - * @arg @ref I2C_FLAG_ALERT SMBus alert - * @arg @ref I2C_FLAG_BUSY Bus busy - * @arg @ref I2C_FLAG_DIR Transfer direction (slave mode) - * - * @retval The new state of __FLAG__ (SET or RESET). - */ -#define I2C_FLAG_MASK (0x0001FFFFU) -#define __HAL_I2C_GET_FLAG(__HANDLE__, __FLAG__) (((((__HANDLE__)->Instance->ISR) & (__FLAG__)) == (__FLAG__)) ? SET : RESET) - -/** @brief Clear the I2C pending flags which are cleared by writing 1 in a specific bit. - * @param __HANDLE__ specifies the I2C Handle. - * @param __FLAG__ specifies the flag to clear. - * This parameter can be any combination of the following values: - * @arg @ref I2C_FLAG_TXE Transmit data register empty - * @arg @ref I2C_FLAG_ADDR Address matched (slave mode) - * @arg @ref I2C_FLAG_AF Acknowledge failure received flag - * @arg @ref I2C_FLAG_STOPF STOP detection flag - * @arg @ref I2C_FLAG_BERR Bus error - * @arg @ref I2C_FLAG_ARLO Arbitration lost - * @arg @ref I2C_FLAG_OVR Overrun/Underrun - * @arg @ref I2C_FLAG_PECERR PEC error in reception - * @arg @ref I2C_FLAG_TIMEOUT Timeout or Tlow detection flag - * @arg @ref I2C_FLAG_ALERT SMBus alert - * - * @retval None - */ -#define __HAL_I2C_CLEAR_FLAG(__HANDLE__, __FLAG__) (((__FLAG__) == I2C_FLAG_TXE) ? ((__HANDLE__)->Instance->ISR |= (__FLAG__)) \ - : ((__HANDLE__)->Instance->ICR = (__FLAG__))) - -/** @brief Enable the specified I2C peripheral. - * @param __HANDLE__ specifies the I2C Handle. - * @retval None - */ -#define __HAL_I2C_ENABLE(__HANDLE__) (SET_BIT((__HANDLE__)->Instance->CR1, I2C_CR1_PE)) - -/** @brief Disable the specified I2C peripheral. - * @param __HANDLE__ specifies the I2C Handle. - * @retval None - */ -#define __HAL_I2C_DISABLE(__HANDLE__) (CLEAR_BIT((__HANDLE__)->Instance->CR1, I2C_CR1_PE)) - -/** @brief Generate a Non-Acknowledge I2C peripheral in Slave mode. - * @param __HANDLE__ specifies the I2C Handle. - * @retval None - */ -#define __HAL_I2C_GENERATE_NACK(__HANDLE__) (SET_BIT((__HANDLE__)->Instance->CR2, I2C_CR2_NACK)) -/** - * @} - */ - -/* Include I2C HAL Extended module */ -#include "stm32f7xx_hal_i2c_ex.h" - -/* Exported functions --------------------------------------------------------*/ -/** @addtogroup I2C_Exported_Functions - * @{ - */ - -/** @addtogroup I2C_Exported_Functions_Group1 Initialization and de-initialization functions - * @{ - */ -/* Initialization and de-initialization functions******************************/ -HAL_StatusTypeDef HAL_I2C_Init(I2C_HandleTypeDef *hi2c); -HAL_StatusTypeDef HAL_I2C_DeInit(I2C_HandleTypeDef *hi2c); -void HAL_I2C_MspInit(I2C_HandleTypeDef *hi2c); -void HAL_I2C_MspDeInit(I2C_HandleTypeDef *hi2c); - -/* Callbacks Register/UnRegister functions ***********************************/ -#if (USE_HAL_I2C_REGISTER_CALLBACKS == 1) -HAL_StatusTypeDef HAL_I2C_RegisterCallback(I2C_HandleTypeDef *hi2c, HAL_I2C_CallbackIDTypeDef CallbackID, pI2C_CallbackTypeDef pCallback); -HAL_StatusTypeDef HAL_I2C_UnRegisterCallback(I2C_HandleTypeDef *hi2c, HAL_I2C_CallbackIDTypeDef CallbackID); - -HAL_StatusTypeDef HAL_I2C_RegisterAddrCallback(I2C_HandleTypeDef *hi2c, pI2C_AddrCallbackTypeDef pCallback); -HAL_StatusTypeDef HAL_I2C_UnRegisterAddrCallback(I2C_HandleTypeDef *hi2c); -#endif /* USE_HAL_I2C_REGISTER_CALLBACKS */ -/** - * @} - */ - -/** @addtogroup I2C_Exported_Functions_Group2 Input and Output operation functions - * @{ - */ -/* IO operation functions ****************************************************/ -/******* Blocking mode: Polling */ -HAL_StatusTypeDef HAL_I2C_Master_Transmit(I2C_HandleTypeDef *hi2c, uint16_t DevAddress, uint8_t *pData, uint16_t Size, uint32_t Timeout); -HAL_StatusTypeDef HAL_I2C_Master_Receive(I2C_HandleTypeDef *hi2c, uint16_t DevAddress, uint8_t *pData, uint16_t Size, uint32_t Timeout); -HAL_StatusTypeDef HAL_I2C_Slave_Transmit(I2C_HandleTypeDef *hi2c, uint8_t *pData, uint16_t Size, uint32_t Timeout); -HAL_StatusTypeDef HAL_I2C_Slave_Receive(I2C_HandleTypeDef *hi2c, uint8_t *pData, uint16_t Size, uint32_t Timeout); -HAL_StatusTypeDef HAL_I2C_Mem_Write(I2C_HandleTypeDef *hi2c, uint16_t DevAddress, uint16_t MemAddress, uint16_t MemAddSize, uint8_t *pData, uint16_t Size, uint32_t Timeout); -HAL_StatusTypeDef HAL_I2C_Mem_Read(I2C_HandleTypeDef *hi2c, uint16_t DevAddress, uint16_t MemAddress, uint16_t MemAddSize, uint8_t *pData, uint16_t Size, uint32_t Timeout); -HAL_StatusTypeDef HAL_I2C_IsDeviceReady(I2C_HandleTypeDef *hi2c, uint16_t DevAddress, uint32_t Trials, uint32_t Timeout); - -/******* Non-Blocking mode: Interrupt */ -HAL_StatusTypeDef HAL_I2C_Master_Transmit_IT(I2C_HandleTypeDef *hi2c, uint16_t DevAddress, uint8_t *pData, uint16_t Size); -HAL_StatusTypeDef HAL_I2C_Master_Receive_IT(I2C_HandleTypeDef *hi2c, uint16_t DevAddress, uint8_t *pData, uint16_t Size); -HAL_StatusTypeDef HAL_I2C_Slave_Transmit_IT(I2C_HandleTypeDef *hi2c, uint8_t *pData, uint16_t Size); -HAL_StatusTypeDef HAL_I2C_Slave_Receive_IT(I2C_HandleTypeDef *hi2c, uint8_t *pData, uint16_t Size); -HAL_StatusTypeDef HAL_I2C_Mem_Write_IT(I2C_HandleTypeDef *hi2c, uint16_t DevAddress, uint16_t MemAddress, uint16_t MemAddSize, uint8_t *pData, uint16_t Size); -HAL_StatusTypeDef HAL_I2C_Mem_Read_IT(I2C_HandleTypeDef *hi2c, uint16_t DevAddress, uint16_t MemAddress, uint16_t MemAddSize, uint8_t *pData, uint16_t Size); - -HAL_StatusTypeDef HAL_I2C_Master_Seq_Transmit_IT(I2C_HandleTypeDef *hi2c, uint16_t DevAddress, uint8_t *pData, uint16_t Size, uint32_t XferOptions); -HAL_StatusTypeDef HAL_I2C_Master_Seq_Receive_IT(I2C_HandleTypeDef *hi2c, uint16_t DevAddress, uint8_t *pData, uint16_t Size, uint32_t XferOptions); -HAL_StatusTypeDef HAL_I2C_Slave_Seq_Transmit_IT(I2C_HandleTypeDef *hi2c, uint8_t *pData, uint16_t Size, uint32_t XferOptions); -HAL_StatusTypeDef HAL_I2C_Slave_Seq_Receive_IT(I2C_HandleTypeDef *hi2c, uint8_t *pData, uint16_t Size, uint32_t XferOptions); -HAL_StatusTypeDef HAL_I2C_EnableListen_IT(I2C_HandleTypeDef *hi2c); -HAL_StatusTypeDef HAL_I2C_DisableListen_IT(I2C_HandleTypeDef *hi2c); -HAL_StatusTypeDef HAL_I2C_Master_Abort_IT(I2C_HandleTypeDef *hi2c, uint16_t DevAddress); - -/******* Non-Blocking mode: DMA */ -HAL_StatusTypeDef HAL_I2C_Master_Transmit_DMA(I2C_HandleTypeDef *hi2c, uint16_t DevAddress, uint8_t *pData, uint16_t Size); -HAL_StatusTypeDef HAL_I2C_Master_Receive_DMA(I2C_HandleTypeDef *hi2c, uint16_t DevAddress, uint8_t *pData, uint16_t Size); -HAL_StatusTypeDef HAL_I2C_Slave_Transmit_DMA(I2C_HandleTypeDef *hi2c, uint8_t *pData, uint16_t Size); -HAL_StatusTypeDef HAL_I2C_Slave_Receive_DMA(I2C_HandleTypeDef *hi2c, uint8_t *pData, uint16_t Size); -HAL_StatusTypeDef HAL_I2C_Mem_Write_DMA(I2C_HandleTypeDef *hi2c, uint16_t DevAddress, uint16_t MemAddress, uint16_t MemAddSize, uint8_t *pData, uint16_t Size); -HAL_StatusTypeDef HAL_I2C_Mem_Read_DMA(I2C_HandleTypeDef *hi2c, uint16_t DevAddress, uint16_t MemAddress, uint16_t MemAddSize, uint8_t *pData, uint16_t Size); - -HAL_StatusTypeDef HAL_I2C_Master_Seq_Transmit_DMA(I2C_HandleTypeDef *hi2c, uint16_t DevAddress, uint8_t *pData, uint16_t Size, uint32_t XferOptions); -HAL_StatusTypeDef HAL_I2C_Master_Seq_Receive_DMA(I2C_HandleTypeDef *hi2c, uint16_t DevAddress, uint8_t *pData, uint16_t Size, uint32_t XferOptions); -HAL_StatusTypeDef HAL_I2C_Slave_Seq_Transmit_DMA(I2C_HandleTypeDef *hi2c, uint8_t *pData, uint16_t Size, uint32_t XferOptions); -HAL_StatusTypeDef HAL_I2C_Slave_Seq_Receive_DMA(I2C_HandleTypeDef *hi2c, uint8_t *pData, uint16_t Size, uint32_t XferOptions); -/** - * @} - */ - -/** @addtogroup I2C_IRQ_Handler_and_Callbacks IRQ Handler and Callbacks - * @{ - */ -/******* I2C IRQHandler and Callbacks used in non blocking modes (Interrupt and DMA) */ -void HAL_I2C_EV_IRQHandler(I2C_HandleTypeDef *hi2c); -void HAL_I2C_ER_IRQHandler(I2C_HandleTypeDef *hi2c); -void HAL_I2C_MasterTxCpltCallback(I2C_HandleTypeDef *hi2c); -void HAL_I2C_MasterRxCpltCallback(I2C_HandleTypeDef *hi2c); -void HAL_I2C_SlaveTxCpltCallback(I2C_HandleTypeDef *hi2c); -void HAL_I2C_SlaveRxCpltCallback(I2C_HandleTypeDef *hi2c); -void HAL_I2C_AddrCallback(I2C_HandleTypeDef *hi2c, uint8_t TransferDirection, uint16_t AddrMatchCode); -void HAL_I2C_ListenCpltCallback(I2C_HandleTypeDef *hi2c); -void HAL_I2C_MemTxCpltCallback(I2C_HandleTypeDef *hi2c); -void HAL_I2C_MemRxCpltCallback(I2C_HandleTypeDef *hi2c); -void HAL_I2C_ErrorCallback(I2C_HandleTypeDef *hi2c); -void HAL_I2C_AbortCpltCallback(I2C_HandleTypeDef *hi2c); -/** - * @} - */ - -/** @addtogroup I2C_Exported_Functions_Group3 Peripheral State, Mode and Error functions - * @{ - */ -/* Peripheral State, Mode and Error functions *********************************/ -HAL_I2C_StateTypeDef HAL_I2C_GetState(I2C_HandleTypeDef *hi2c); -HAL_I2C_ModeTypeDef HAL_I2C_GetMode(I2C_HandleTypeDef *hi2c); -uint32_t HAL_I2C_GetError(I2C_HandleTypeDef *hi2c); - -/** - * @} - */ - -/** - * @} - */ - -/* Private constants ---------------------------------------------------------*/ -/** @defgroup I2C_Private_Constants I2C Private Constants - * @{ - */ - -/** - * @} - */ - -/* Private macros ------------------------------------------------------------*/ -/** @defgroup I2C_Private_Macro I2C Private Macros - * @{ - */ - -#define IS_I2C_ADDRESSING_MODE(MODE) (((MODE) == I2C_ADDRESSINGMODE_7BIT) || \ - ((MODE) == I2C_ADDRESSINGMODE_10BIT)) - -#define IS_I2C_DUAL_ADDRESS(ADDRESS) (((ADDRESS) == I2C_DUALADDRESS_DISABLE) || \ - ((ADDRESS) == I2C_DUALADDRESS_ENABLE)) - -#define IS_I2C_OWN_ADDRESS2_MASK(MASK) (((MASK) == I2C_OA2_NOMASK) || \ - ((MASK) == I2C_OA2_MASK01) || \ - ((MASK) == I2C_OA2_MASK02) || \ - ((MASK) == I2C_OA2_MASK03) || \ - ((MASK) == I2C_OA2_MASK04) || \ - ((MASK) == I2C_OA2_MASK05) || \ - ((MASK) == I2C_OA2_MASK06) || \ - ((MASK) == I2C_OA2_MASK07)) - -#define IS_I2C_GENERAL_CALL(CALL) (((CALL) == I2C_GENERALCALL_DISABLE) || \ - ((CALL) == I2C_GENERALCALL_ENABLE)) - -#define IS_I2C_NO_STRETCH(STRETCH) (((STRETCH) == I2C_NOSTRETCH_DISABLE) || \ - ((STRETCH) == I2C_NOSTRETCH_ENABLE)) - -#define IS_I2C_MEMADD_SIZE(SIZE) (((SIZE) == I2C_MEMADD_SIZE_8BIT) || \ - ((SIZE) == I2C_MEMADD_SIZE_16BIT)) - -#define IS_TRANSFER_MODE(MODE) (((MODE) == I2C_RELOAD_MODE) || \ - ((MODE) == I2C_AUTOEND_MODE) || \ - ((MODE) == I2C_SOFTEND_MODE)) - -#define IS_TRANSFER_REQUEST(REQUEST) (((REQUEST) == I2C_GENERATE_STOP) || \ - ((REQUEST) == I2C_GENERATE_START_READ) || \ - ((REQUEST) == I2C_GENERATE_START_WRITE) || \ - ((REQUEST) == I2C_NO_STARTSTOP)) - -#define IS_I2C_TRANSFER_OPTIONS_REQUEST(REQUEST) (((REQUEST) == I2C_FIRST_FRAME) || \ - ((REQUEST) == I2C_FIRST_AND_NEXT_FRAME) || \ - ((REQUEST) == I2C_NEXT_FRAME) || \ - ((REQUEST) == I2C_FIRST_AND_LAST_FRAME) || \ - ((REQUEST) == I2C_LAST_FRAME) || \ - ((REQUEST) == I2C_LAST_FRAME_NO_STOP) || \ - IS_I2C_TRANSFER_OTHER_OPTIONS_REQUEST(REQUEST)) - -#define IS_I2C_TRANSFER_OTHER_OPTIONS_REQUEST(REQUEST) (((REQUEST) == I2C_OTHER_FRAME) || \ - ((REQUEST) == I2C_OTHER_AND_LAST_FRAME)) - -#define I2C_RESET_CR2(__HANDLE__) ((__HANDLE__)->Instance->CR2 &= (uint32_t)~((uint32_t)(I2C_CR2_SADD | I2C_CR2_HEAD10R | I2C_CR2_NBYTES | I2C_CR2_RELOAD | I2C_CR2_RD_WRN))) - -#define I2C_GET_ADDR_MATCH(__HANDLE__) ((uint16_t)(((__HANDLE__)->Instance->ISR & I2C_ISR_ADDCODE) >> 16U)) -#define I2C_GET_DIR(__HANDLE__) ((uint8_t)(((__HANDLE__)->Instance->ISR & I2C_ISR_DIR) >> 16U)) -#define I2C_GET_STOP_MODE(__HANDLE__) ((__HANDLE__)->Instance->CR2 & I2C_CR2_AUTOEND) -#define I2C_GET_OWN_ADDRESS1(__HANDLE__) ((uint16_t)((__HANDLE__)->Instance->OAR1 & I2C_OAR1_OA1)) -#define I2C_GET_OWN_ADDRESS2(__HANDLE__) ((uint16_t)((__HANDLE__)->Instance->OAR2 & I2C_OAR2_OA2)) - -#define IS_I2C_OWN_ADDRESS1(ADDRESS1) ((ADDRESS1) <= 0x000003FFU) -#define IS_I2C_OWN_ADDRESS2(ADDRESS2) ((ADDRESS2) <= (uint16_t)0x00FFU) - -#define I2C_MEM_ADD_MSB(__ADDRESS__) ((uint8_t)((uint16_t)(((uint16_t)((__ADDRESS__) & (uint16_t)(0xFF00U))) >> 8U))) -#define I2C_MEM_ADD_LSB(__ADDRESS__) ((uint8_t)((uint16_t)((__ADDRESS__) & (uint16_t)(0x00FFU)))) - -#define I2C_GENERATE_START(__ADDMODE__,__ADDRESS__) (((__ADDMODE__) == I2C_ADDRESSINGMODE_7BIT) ? (uint32_t)((((uint32_t)(__ADDRESS__) & (I2C_CR2_SADD)) | (I2C_CR2_START) | (I2C_CR2_AUTOEND)) & (~I2C_CR2_RD_WRN)) : \ - (uint32_t)((((uint32_t)(__ADDRESS__) & (I2C_CR2_SADD)) | (I2C_CR2_ADD10) | (I2C_CR2_START)) & (~I2C_CR2_RD_WRN))) - -#define I2C_CHECK_FLAG(__ISR__, __FLAG__) ((((__ISR__) & ((__FLAG__) & I2C_FLAG_MASK)) == ((__FLAG__) & I2C_FLAG_MASK)) ? SET : RESET) -#define I2C_CHECK_IT_SOURCE(__CR1__, __IT__) ((((__CR1__) & (__IT__)) == (__IT__)) ? SET : RESET) -/** - * @} - */ - -/* Private Functions ---------------------------------------------------------*/ -/** @defgroup I2C_Private_Functions I2C Private Functions - * @{ - */ -/* Private functions are defined in stm32f7xx_hal_i2c.c file */ -/** - * @} - */ - -/** - * @} - */ - -/** - * @} - */ - -#ifdef __cplusplus -} -#endif - - -#endif /* STM32F7xx_HAL_I2C_H */ - -/************************ (C) COPYRIGHT STMicroelectronics *****END OF FILE****/ diff --git a/test_dma/Drivers/STM32F7xx_HAL_Driver/Inc/stm32f7xx_hal_i2c_ex.h b/test_dma/Drivers/STM32F7xx_HAL_Driver/Inc/stm32f7xx_hal_i2c_ex.h deleted file mode 100644 index d5d7531..0000000 --- a/test_dma/Drivers/STM32F7xx_HAL_Driver/Inc/stm32f7xx_hal_i2c_ex.h +++ /dev/null @@ -1,205 +0,0 @@ -/** - ****************************************************************************** - * @file stm32f7xx_hal_i2c_ex.h - * @author MCD Application Team - * @brief Header file of I2C HAL Extended module. - ****************************************************************************** - * @attention - * - *

© Copyright (c) 2017 STMicroelectronics. - * All rights reserved.

- * - * This software component is licensed by ST under BSD 3-Clause license, - * the "License"; You may not use this file except in compliance with the - * License. You may obtain a copy of the License at: - * opensource.org/licenses/BSD-3-Clause - * - ****************************************************************************** - */ - -/* Define to prevent recursive inclusion -------------------------------------*/ -#ifndef STM32F7xx_HAL_I2C_EX_H -#define STM32F7xx_HAL_I2C_EX_H - -#ifdef __cplusplus -extern "C" { -#endif - -/* Includes ------------------------------------------------------------------*/ -#include "stm32f7xx_hal_def.h" - -/** @addtogroup STM32F7xx_HAL_Driver - * @{ - */ - -/** @addtogroup I2CEx - * @{ - */ - -/* Exported types ------------------------------------------------------------*/ -/* Exported constants --------------------------------------------------------*/ - -/** @defgroup I2CEx_Exported_Constants I2C Extended Exported Constants - * @{ - */ - -/** @defgroup I2CEx_Analog_Filter I2C Extended Analog Filter - * @{ - */ -#define I2C_ANALOGFILTER_ENABLE 0x00000000U -#define I2C_ANALOGFILTER_DISABLE I2C_CR1_ANFOFF -/** - * @} - */ - -/** @defgroup I2CEx_FastModePlus I2C Extended Fast Mode Plus - * @{ - */ -#define I2C_FMP_NOT_SUPPORTED 0xAAAA0000U /*!< Fast Mode Plus not supported */ -#if defined(SYSCFG_PMC_I2C_PB6_FMP) -#define I2C_FASTMODEPLUS_PB6 SYSCFG_PMC_I2C_PB6_FMP /*!< Enable Fast Mode Plus on PB6 */ -#define I2C_FASTMODEPLUS_PB7 SYSCFG_PMC_I2C_PB7_FMP /*!< Enable Fast Mode Plus on PB7 */ -#else -#define I2C_FASTMODEPLUS_PB6 (uint32_t)(0x00000004U | I2C_FMP_NOT_SUPPORTED) /*!< Fast Mode Plus PB6 not supported */ -#define I2C_FASTMODEPLUS_PB7 (uint32_t)(0x00000008U | I2C_FMP_NOT_SUPPORTED) /*!< Fast Mode Plus PB7 not supported */ -#endif -#if defined(SYSCFG_PMC_I2C_PB8_FMP) -#define I2C_FASTMODEPLUS_PB8 SYSCFG_PMC_I2C_PB8_FMP /*!< Enable Fast Mode Plus on PB8 */ -#define I2C_FASTMODEPLUS_PB9 SYSCFG_PMC_I2C_PB9_FMP /*!< Enable Fast Mode Plus on PB9 */ -#else -#define I2C_FASTMODEPLUS_PB8 (uint32_t)(0x00000010U | I2C_FMP_NOT_SUPPORTED) /*!< Fast Mode Plus PB8 not supported */ -#define I2C_FASTMODEPLUS_PB9 (uint32_t)(0x00000012U | I2C_FMP_NOT_SUPPORTED) /*!< Fast Mode Plus PB9 not supported */ -#endif -#if defined(SYSCFG_PMC_I2C1_FMP) -#define I2C_FASTMODEPLUS_I2C1 SYSCFG_PMC_I2C1_FMP /*!< Enable Fast Mode Plus on I2C1 pins */ -#else -#define I2C_FASTMODEPLUS_I2C1 (uint32_t)(0x00000100U | I2C_FMP_NOT_SUPPORTED) /*!< Fast Mode Plus I2C1 not supported */ -#endif -#if defined(SYSCFG_PMC_I2C2_FMP) -#define I2C_FASTMODEPLUS_I2C2 SYSCFG_PMC_I2C2_FMP /*!< Enable Fast Mode Plus on I2C2 pins */ -#else -#define I2C_FASTMODEPLUS_I2C2 (uint32_t)(0x00000200U | I2C_FMP_NOT_SUPPORTED) /*!< Fast Mode Plus I2C2 not supported */ -#endif -#if defined(SYSCFG_PMC_I2C3_FMP) -#define I2C_FASTMODEPLUS_I2C3 SYSCFG_PMC_I2C3_FMP /*!< Enable Fast Mode Plus on I2C3 pins */ -#else -#define I2C_FASTMODEPLUS_I2C3 (uint32_t)(0x00000400U | I2C_FMP_NOT_SUPPORTED) /*!< Fast Mode Plus I2C3 not supported */ -#endif -#if defined(SYSCFG_PMC_I2C4_FMP) -#define I2C_FASTMODEPLUS_I2C4 SYSCFG_PMC_I2C4_FMP /*!< Enable Fast Mode Plus on I2C4 pins */ -#else -#define I2C_FASTMODEPLUS_I2C4 (uint32_t)(0x00000800U | I2C_FMP_NOT_SUPPORTED) /*!< Fast Mode Plus I2C4 not supported */ -#endif -/** - * @} - */ - -/** - * @} - */ - -/* Exported macro ------------------------------------------------------------*/ -/* Exported functions --------------------------------------------------------*/ - -/** @addtogroup I2CEx_Exported_Functions I2C Extended Exported Functions - * @{ - */ - -/** @addtogroup I2CEx_Exported_Functions_Group1 Extended features functions - * @brief Extended features functions - * @{ - */ - -/* Peripheral Control functions ************************************************/ -HAL_StatusTypeDef HAL_I2CEx_ConfigAnalogFilter(I2C_HandleTypeDef *hi2c, uint32_t AnalogFilter); -HAL_StatusTypeDef HAL_I2CEx_ConfigDigitalFilter(I2C_HandleTypeDef *hi2c, uint32_t DigitalFilter); -#if (defined(SYSCFG_PMC_I2C_PB6_FMP) || defined(SYSCFG_PMC_I2C_PB7_FMP)) || (defined(SYSCFG_PMC_I2C_PB8_FMP) || defined(SYSCFG_PMC_I2C_PB9_FMP)) || (defined(SYSCFG_PMC_I2C1_FMP)) || (defined(SYSCFG_PMC_I2C2_FMP)) || defined(SYSCFG_PMC_I2C3_FMP) || defined(SYSCFG_PMC_I2C4_FMP) -void HAL_I2CEx_EnableFastModePlus(uint32_t ConfigFastModePlus); -void HAL_I2CEx_DisableFastModePlus(uint32_t ConfigFastModePlus); -#endif - -/* Private constants ---------------------------------------------------------*/ -/** @defgroup I2CEx_Private_Constants I2C Extended Private Constants - * @{ - */ - -/** - * @} - */ - -/* Private macros ------------------------------------------------------------*/ -/** @defgroup I2CEx_Private_Macro I2C Extended Private Macros - * @{ - */ -#define IS_I2C_ANALOG_FILTER(FILTER) (((FILTER) == I2C_ANALOGFILTER_ENABLE) || \ - ((FILTER) == I2C_ANALOGFILTER_DISABLE)) - -#define IS_I2C_DIGITAL_FILTER(FILTER) ((FILTER) <= 0x0000000FU) - -#if (defined(SYSCFG_PMC_I2C1_FMP) && defined(SYSCFG_PMC_I2C2_FMP) && defined(SYSCFG_PMC_I2C3_FMP) && defined(SYSCFG_PMC_I2C4_FMP)) -#define IS_I2C_FASTMODEPLUS(__CONFIG__) ((((__CONFIG__) & I2C_FASTMODEPLUS_PB6) == I2C_FASTMODEPLUS_PB6) || \ - (((__CONFIG__) & I2C_FASTMODEPLUS_PB7) == I2C_FASTMODEPLUS_PB7) || \ - (((__CONFIG__) & I2C_FASTMODEPLUS_PB8) == I2C_FASTMODEPLUS_PB8) || \ - (((__CONFIG__) & I2C_FASTMODEPLUS_PB9) == I2C_FASTMODEPLUS_PB9) || \ - (((__CONFIG__) & I2C_FASTMODEPLUS_I2C1) == I2C_FASTMODEPLUS_I2C1) || \ - (((__CONFIG__) & I2C_FASTMODEPLUS_I2C2) == I2C_FASTMODEPLUS_I2C2) || \ - (((__CONFIG__) & I2C_FASTMODEPLUS_I2C3) == I2C_FASTMODEPLUS_I2C3) || \ - (((__CONFIG__) & I2C_FASTMODEPLUS_I2C4) == I2C_FASTMODEPLUS_I2C4)) -#elif defined(SYSCFG_PMC_I2C1_FMP) && defined(SYSCFG_PMC_I2C2_FMP) && defined(SYSCFG_PMC_I2C3_FMP) -#define IS_I2C_FASTMODEPLUS(__CONFIG__) ((((__CONFIG__) & I2C_FASTMODEPLUS_PB6) == I2C_FASTMODEPLUS_PB6) || \ - (((__CONFIG__) & I2C_FASTMODEPLUS_PB7) == I2C_FASTMODEPLUS_PB7) || \ - (((__CONFIG__) & I2C_FASTMODEPLUS_PB8) == I2C_FASTMODEPLUS_PB8) || \ - (((__CONFIG__) & I2C_FASTMODEPLUS_PB9) == I2C_FASTMODEPLUS_PB9) || \ - (((__CONFIG__) & I2C_FASTMODEPLUS_I2C1) == I2C_FASTMODEPLUS_I2C1) || \ - (((__CONFIG__) & I2C_FASTMODEPLUS_I2C2) == I2C_FASTMODEPLUS_I2C2) || \ - (((__CONFIG__) & I2C_FASTMODEPLUS_I2C3) == I2C_FASTMODEPLUS_I2C3)) -#elif defined(SYSCFG_PMC_I2C1_FMP) && defined(SYSCFG_PMC_I2C2_FMP) -#define IS_I2C_FASTMODEPLUS(__CONFIG__) ((((__CONFIG__) & I2C_FASTMODEPLUS_PB6) == I2C_FASTMODEPLUS_PB6) || \ - (((__CONFIG__) & I2C_FASTMODEPLUS_PB7) == I2C_FASTMODEPLUS_PB7) || \ - (((__CONFIG__) & I2C_FASTMODEPLUS_PB8) == I2C_FASTMODEPLUS_PB8) || \ - (((__CONFIG__) & I2C_FASTMODEPLUS_PB9) == I2C_FASTMODEPLUS_PB9) || \ - (((__CONFIG__) & I2C_FASTMODEPLUS_I2C1) == I2C_FASTMODEPLUS_I2C1) || \ - (((__CONFIG__) & I2C_FASTMODEPLUS_I2C2) == I2C_FASTMODEPLUS_I2C2)) -#elif defined(SYSCFG_PMC_I2C1_FMP) -#define IS_I2C_FASTMODEPLUS(__CONFIG__) ((((__CONFIG__) & I2C_FASTMODEPLUS_PB6) == I2C_FASTMODEPLUS_PB6) || \ - (((__CONFIG__) & I2C_FASTMODEPLUS_PB7) == I2C_FASTMODEPLUS_PB7) || \ - (((__CONFIG__) & I2C_FASTMODEPLUS_PB8) == I2C_FASTMODEPLUS_PB8) || \ - (((__CONFIG__) & I2C_FASTMODEPLUS_PB9) == I2C_FASTMODEPLUS_PB9) || \ - (((__CONFIG__) & I2C_FASTMODEPLUS_I2C1) == I2C_FASTMODEPLUS_I2C1)) -#endif /* SYSCFG_PMC_I2C1_FMP && SYSCFG_PMC_I2C2_FMP && SYSCFG_PMC_I2C3_FMP && SYSCFG_PMC_I2C4_FMP */ -/** - * @} - */ - -/* Private Functions ---------------------------------------------------------*/ -/** @defgroup I2CEx_Private_Functions I2C Extended Private Functions - * @{ - */ -/* Private functions are defined in stm32f7xx_hal_i2c_ex.c file */ -/** - * @} - */ - -/** - * @} - */ - -/** - * @} - */ - -/** - * @} - */ - -/** - * @} - */ - -#ifdef __cplusplus -} -#endif - -#endif /* STM32F7xx_HAL_I2C_EX_H */ - -/************************ (C) COPYRIGHT STMicroelectronics *****END OF FILE****/ diff --git a/test_dma/Drivers/STM32F7xx_HAL_Driver/Inc/stm32f7xx_hal_pwr.h b/test_dma/Drivers/STM32F7xx_HAL_Driver/Inc/stm32f7xx_hal_pwr.h deleted file mode 100644 index e9ca922..0000000 --- a/test_dma/Drivers/STM32F7xx_HAL_Driver/Inc/stm32f7xx_hal_pwr.h +++ /dev/null @@ -1,404 +0,0 @@ -/** - ****************************************************************************** - * @file stm32f7xx_hal_pwr.h - * @author MCD Application Team - * @brief Header file of PWR HAL module. - ****************************************************************************** - * @attention - * - *

© Copyright (c) 2017 STMicroelectronics. - * All rights reserved.

- * - * This software component is licensed by ST under BSD 3-Clause license, - * the "License"; You may not use this file except in compliance with the - * License. You may obtain a copy of the License at: - * opensource.org/licenses/BSD-3-Clause - * - ****************************************************************************** - */ - -/* Define to prevent recursive inclusion -------------------------------------*/ -#ifndef __STM32F7xx_HAL_PWR_H -#define __STM32F7xx_HAL_PWR_H - -#ifdef __cplusplus - extern "C" { -#endif - -/* Includes ------------------------------------------------------------------*/ -#include "stm32f7xx_hal_def.h" - -/** @addtogroup STM32F7xx_HAL_Driver - * @{ - */ - -/** @addtogroup PWR - * @{ - */ - -/* Exported types ------------------------------------------------------------*/ - -/** @defgroup PWR_Exported_Types PWR Exported Types - * @{ - */ - -/** - * @brief PWR PVD configuration structure definition - */ -typedef struct -{ - uint32_t PVDLevel; /*!< PVDLevel: Specifies the PVD detection level. - This parameter can be a value of @ref PWR_PVD_detection_level */ - - uint32_t Mode; /*!< Mode: Specifies the operating mode for the selected pins. - This parameter can be a value of @ref PWR_PVD_Mode */ -}PWR_PVDTypeDef; - -/** - * @} - */ - -/* Exported constants --------------------------------------------------------*/ -/** @defgroup PWR_Exported_Constants PWR Exported Constants - * @{ - */ - -/** @defgroup PWR_PVD_detection_level PWR PVD detection level - * @{ - */ -#define PWR_PVDLEVEL_0 PWR_CR1_PLS_LEV0 -#define PWR_PVDLEVEL_1 PWR_CR1_PLS_LEV1 -#define PWR_PVDLEVEL_2 PWR_CR1_PLS_LEV2 -#define PWR_PVDLEVEL_3 PWR_CR1_PLS_LEV3 -#define PWR_PVDLEVEL_4 PWR_CR1_PLS_LEV4 -#define PWR_PVDLEVEL_5 PWR_CR1_PLS_LEV5 -#define PWR_PVDLEVEL_6 PWR_CR1_PLS_LEV6 -#define PWR_PVDLEVEL_7 PWR_CR1_PLS_LEV7/* External input analog voltage - (Compare internally to VREFINT) */ - -/** - * @} - */ - -/** @defgroup PWR_PVD_Mode PWR PVD Mode - * @{ - */ -#define PWR_PVD_MODE_NORMAL ((uint32_t)0x00000000U) /*!< basic mode is used */ -#define PWR_PVD_MODE_IT_RISING ((uint32_t)0x00010001U) /*!< External Interrupt Mode with Rising edge trigger detection */ -#define PWR_PVD_MODE_IT_FALLING ((uint32_t)0x00010002U) /*!< External Interrupt Mode with Falling edge trigger detection */ -#define PWR_PVD_MODE_IT_RISING_FALLING ((uint32_t)0x00010003U) /*!< External Interrupt Mode with Rising/Falling edge trigger detection */ -#define PWR_PVD_MODE_EVENT_RISING ((uint32_t)0x00020001U) /*!< Event Mode with Rising edge trigger detection */ -#define PWR_PVD_MODE_EVENT_FALLING ((uint32_t)0x00020002U) /*!< Event Mode with Falling edge trigger detection */ -#define PWR_PVD_MODE_EVENT_RISING_FALLING ((uint32_t)0x00020003U) /*!< Event Mode with Rising/Falling edge trigger detection */ -/** - * @} - */ - -/** @defgroup PWR_Regulator_state_in_STOP_mode PWR Regulator state in SLEEP/STOP mode - * @{ - */ -#define PWR_MAINREGULATOR_ON ((uint32_t)0x00000000U) -#define PWR_LOWPOWERREGULATOR_ON PWR_CR1_LPDS -/** - * @} - */ - -/** @defgroup PWR_SLEEP_mode_entry PWR SLEEP mode entry - * @{ - */ -#define PWR_SLEEPENTRY_WFI ((uint8_t)0x01U) -#define PWR_SLEEPENTRY_WFE ((uint8_t)0x02U) -/** - * @} - */ - -/** @defgroup PWR_STOP_mode_entry PWR STOP mode entry - * @{ - */ -#define PWR_STOPENTRY_WFI ((uint8_t)0x01U) -#define PWR_STOPENTRY_WFE ((uint8_t)0x02U) -/** - * @} - */ - -/** @defgroup PWR_Regulator_Voltage_Scale PWR Regulator Voltage Scale - * @{ - */ -#define PWR_REGULATOR_VOLTAGE_SCALE1 PWR_CR1_VOS -#define PWR_REGULATOR_VOLTAGE_SCALE2 PWR_CR1_VOS_1 -#define PWR_REGULATOR_VOLTAGE_SCALE3 PWR_CR1_VOS_0 -/** - * @} - */ - -/** @defgroup PWR_Flag PWR Flag - * @{ - */ -#define PWR_FLAG_WU PWR_CSR1_WUIF -#define PWR_FLAG_SB PWR_CSR1_SBF -#define PWR_FLAG_PVDO PWR_CSR1_PVDO -#define PWR_FLAG_BRR PWR_CSR1_BRR -#define PWR_FLAG_VOSRDY PWR_CSR1_VOSRDY -/** - * @} - */ - -/** - * @} - */ - -/* Exported macro ------------------------------------------------------------*/ -/** @defgroup PWR_Exported_Macro PWR Exported Macro - * @{ - */ - -/** @brief macros configure the main internal regulator output voltage. - * @param __REGULATOR__ specifies the regulator output voltage to achieve - * a tradeoff between performance and power consumption when the device does - * not operate at the maximum frequency (refer to the datasheets for more details). - * This parameter can be one of the following values: - * @arg PWR_REGULATOR_VOLTAGE_SCALE1: Regulator voltage output Scale 1 mode - * @arg PWR_REGULATOR_VOLTAGE_SCALE2: Regulator voltage output Scale 2 mode - * @arg PWR_REGULATOR_VOLTAGE_SCALE3: Regulator voltage output Scale 3 mode - * @retval None - */ -#define __HAL_PWR_VOLTAGESCALING_CONFIG(__REGULATOR__) do { \ - __IO uint32_t tmpreg; \ - MODIFY_REG(PWR->CR1, PWR_CR1_VOS, (__REGULATOR__)); \ - /* Delay after an RCC peripheral clock enabling */ \ - tmpreg = READ_BIT(PWR->CR1, PWR_CR1_VOS); \ - UNUSED(tmpreg); \ - } while(0) - -/** @brief Check PWR flag is set or not. - * @param __FLAG__ specifies the flag to check. - * This parameter can be one of the following values: - * @arg PWR_FLAG_WU: Wake Up flag. This flag indicates that a wakeup event - * was received on the internal wakeup line in standby mode (RTC alarm (Alarm A or Alarm B), - * RTC Tamper event, RTC TimeStamp event or RTC Wakeup)). - * @arg PWR_FLAG_SB: StandBy flag. This flag indicates that the system was - * resumed from StandBy mode. - * @arg PWR_FLAG_PVDO: PVD Output. This flag is valid only if PVD is enabled - * by the HAL_PWR_EnablePVD() function. The PVD is stopped by Standby mode - * For this reason, this bit is equal to 0 after Standby or reset - * until the PVDE bit is set. - * @arg PWR_FLAG_BRR: Backup regulator ready flag. This bit is not reset - * when the device wakes up from Standby mode or by a system reset - * or power reset. - * @arg PWR_FLAG_VOSRDY: This flag indicates that the Regulator voltage - * scaling output selection is ready. - * @retval The new state of __FLAG__ (TRUE or FALSE). - */ -#define __HAL_PWR_GET_FLAG(__FLAG__) ((PWR->CSR1 & (__FLAG__)) == (__FLAG__)) - -/** @brief Clear the PWR's pending flags. - * @param __FLAG__ specifies the flag to clear. - * This parameter can be one of the following values: - * @arg PWR_FLAG_SB: StandBy flag - */ -#define __HAL_PWR_CLEAR_FLAG(__FLAG__) (PWR->CR1 |= (__FLAG__) << 2) - -/** - * @brief Enable the PVD Exti Line 16. - * @retval None. - */ -#define __HAL_PWR_PVD_EXTI_ENABLE_IT() (EXTI->IMR |= (PWR_EXTI_LINE_PVD)) - -/** - * @brief Disable the PVD EXTI Line 16. - * @retval None. - */ -#define __HAL_PWR_PVD_EXTI_DISABLE_IT() (EXTI->IMR &= ~(PWR_EXTI_LINE_PVD)) - -/** - * @brief Enable event on PVD Exti Line 16. - * @retval None. - */ -#define __HAL_PWR_PVD_EXTI_ENABLE_EVENT() (EXTI->EMR |= (PWR_EXTI_LINE_PVD)) - -/** - * @brief Disable event on PVD Exti Line 16. - * @retval None. - */ -#define __HAL_PWR_PVD_EXTI_DISABLE_EVENT() (EXTI->EMR &= ~(PWR_EXTI_LINE_PVD)) - -/** - * @brief Enable the PVD Extended Interrupt Rising Trigger. - * @retval None. - */ -#define __HAL_PWR_PVD_EXTI_ENABLE_RISING_EDGE() SET_BIT(EXTI->RTSR, PWR_EXTI_LINE_PVD) - -/** - * @brief Disable the PVD Extended Interrupt Rising Trigger. - * @retval None. - */ -#define __HAL_PWR_PVD_EXTI_DISABLE_RISING_EDGE() CLEAR_BIT(EXTI->RTSR, PWR_EXTI_LINE_PVD) - -/** - * @brief Enable the PVD Extended Interrupt Falling Trigger. - * @retval None. - */ -#define __HAL_PWR_PVD_EXTI_ENABLE_FALLING_EDGE() SET_BIT(EXTI->FTSR, PWR_EXTI_LINE_PVD) - - -/** - * @brief Disable the PVD Extended Interrupt Falling Trigger. - * @retval None. - */ -#define __HAL_PWR_PVD_EXTI_DISABLE_FALLING_EDGE() CLEAR_BIT(EXTI->FTSR, PWR_EXTI_LINE_PVD) - - -/** - * @brief PVD EXTI line configuration: set rising & falling edge trigger. - * @retval None. - */ -#define __HAL_PWR_PVD_EXTI_ENABLE_RISING_FALLING_EDGE() __HAL_PWR_PVD_EXTI_ENABLE_RISING_EDGE();__HAL_PWR_PVD_EXTI_ENABLE_FALLING_EDGE(); - -/** - * @brief Disable the PVD Extended Interrupt Rising & Falling Trigger. - * @retval None. - */ -#define __HAL_PWR_PVD_EXTI_DISABLE_RISING_FALLING_EDGE() __HAL_PWR_PVD_EXTI_DISABLE_RISING_EDGE();__HAL_PWR_PVD_EXTI_DISABLE_FALLING_EDGE(); - -/** - * @brief checks whether the specified PVD Exti interrupt flag is set or not. - * @retval EXTI PVD Line Status. - */ -#define __HAL_PWR_PVD_EXTI_GET_FLAG() (EXTI->PR & (PWR_EXTI_LINE_PVD)) - -/** - * @brief Clear the PVD Exti flag. - * @retval None. - */ -#define __HAL_PWR_PVD_EXTI_CLEAR_FLAG() (EXTI->PR = (PWR_EXTI_LINE_PVD)) - -/** - * @brief Generates a Software interrupt on PVD EXTI line. - * @retval None - */ -#define __HAL_PWR_PVD_EXTI_GENERATE_SWIT() (EXTI->SWIER |= (PWR_EXTI_LINE_PVD)) - -/** - * @} - */ - -/* Include PWR HAL Extension module */ -#include "stm32f7xx_hal_pwr_ex.h" - -/* Exported functions --------------------------------------------------------*/ -/** @addtogroup PWR_Exported_Functions PWR Exported Functions - * @{ - */ - -/** @addtogroup PWR_Exported_Functions_Group1 Initialization and de-initialization functions - * @{ - */ -/* Initialization and de-initialization functions *****************************/ -void HAL_PWR_DeInit(void); -void HAL_PWR_EnableBkUpAccess(void); -void HAL_PWR_DisableBkUpAccess(void); -/** - * @} - */ - -/** @addtogroup PWR_Exported_Functions_Group2 Peripheral Control functions - * @{ - */ -/* Peripheral Control functions **********************************************/ -/* PVD configuration */ -void HAL_PWR_ConfigPVD(PWR_PVDTypeDef *sConfigPVD); -void HAL_PWR_EnablePVD(void); -void HAL_PWR_DisablePVD(void); - -/* WakeUp pins configuration */ -void HAL_PWR_EnableWakeUpPin(uint32_t WakeUpPinPolarity); -void HAL_PWR_DisableWakeUpPin(uint32_t WakeUpPinx); - -/* Low Power modes entry */ -void HAL_PWR_EnterSTOPMode(uint32_t Regulator, uint8_t STOPEntry); -void HAL_PWR_EnterSLEEPMode(uint32_t Regulator, uint8_t SLEEPEntry); -void HAL_PWR_EnterSTANDBYMode(void); - -/* Power PVD IRQ Handler */ -void HAL_PWR_PVD_IRQHandler(void); -void HAL_PWR_PVDCallback(void); - -/* Cortex System Control functions *******************************************/ -void HAL_PWR_EnableSleepOnExit(void); -void HAL_PWR_DisableSleepOnExit(void); -void HAL_PWR_EnableSEVOnPend(void); -void HAL_PWR_DisableSEVOnPend(void); -/** - * @} - */ - -/** - * @} - */ - -/* Private types -------------------------------------------------------------*/ -/* Private variables ---------------------------------------------------------*/ -/* Private constants ---------------------------------------------------------*/ -/** @defgroup PWR_Private_Constants PWR Private Constants - * @{ - */ - -/** @defgroup PWR_PVD_EXTI_Line PWR PVD EXTI Line - * @{ - */ -#define PWR_EXTI_LINE_PVD ((uint32_t)EXTI_IMR_IM16) /*!< External interrupt line 16 Connected to the PVD EXTI Line */ -/** - * @} - */ - -/** - * @} - */ -/* Private macros ------------------------------------------------------------*/ -/** @defgroup PWR_Private_Macros PWR Private Macros - * @{ - */ - -/** @defgroup PWR_IS_PWR_Definitions PWR Private macros to check input parameters - * @{ - */ -#define IS_PWR_PVD_LEVEL(LEVEL) (((LEVEL) == PWR_PVDLEVEL_0) || ((LEVEL) == PWR_PVDLEVEL_1)|| \ - ((LEVEL) == PWR_PVDLEVEL_2) || ((LEVEL) == PWR_PVDLEVEL_3)|| \ - ((LEVEL) == PWR_PVDLEVEL_4) || ((LEVEL) == PWR_PVDLEVEL_5)|| \ - ((LEVEL) == PWR_PVDLEVEL_6) || ((LEVEL) == PWR_PVDLEVEL_7)) -#define IS_PWR_PVD_MODE(MODE) (((MODE) == PWR_PVD_MODE_IT_RISING)|| ((MODE) == PWR_PVD_MODE_IT_FALLING) || \ - ((MODE) == PWR_PVD_MODE_IT_RISING_FALLING) || ((MODE) == PWR_PVD_MODE_EVENT_RISING) || \ - ((MODE) == PWR_PVD_MODE_EVENT_FALLING) || ((MODE) == PWR_PVD_MODE_EVENT_RISING_FALLING) || \ - ((MODE) == PWR_PVD_MODE_NORMAL)) -#define IS_PWR_REGULATOR(REGULATOR) (((REGULATOR) == PWR_MAINREGULATOR_ON) || \ - ((REGULATOR) == PWR_LOWPOWERREGULATOR_ON)) -#define IS_PWR_SLEEP_ENTRY(ENTRY) (((ENTRY) == PWR_SLEEPENTRY_WFI) || ((ENTRY) == PWR_SLEEPENTRY_WFE)) -#define IS_PWR_STOP_ENTRY(ENTRY) (((ENTRY) == PWR_STOPENTRY_WFI) || ((ENTRY) == PWR_STOPENTRY_WFE)) -#define IS_PWR_REGULATOR_VOLTAGE(VOLTAGE) (((VOLTAGE) == PWR_REGULATOR_VOLTAGE_SCALE1) || \ - ((VOLTAGE) == PWR_REGULATOR_VOLTAGE_SCALE2) || \ - ((VOLTAGE) == PWR_REGULATOR_VOLTAGE_SCALE3)) - -/** - * @} - */ - -/** - * @} - */ - -/** - * @} - */ - -/** - * @} - */ - -#ifdef __cplusplus -} -#endif - - -#endif /* __STM32F7xx_HAL_PWR_H */ - -/************************ (C) COPYRIGHT STMicroelectronics *****END OF FILE****/ diff --git a/test_dma/Drivers/STM32F7xx_HAL_Driver/Inc/stm32f7xx_hal_pwr_ex.h b/test_dma/Drivers/STM32F7xx_HAL_Driver/Inc/stm32f7xx_hal_pwr_ex.h deleted file mode 100644 index e35d3bb..0000000 --- a/test_dma/Drivers/STM32F7xx_HAL_Driver/Inc/stm32f7xx_hal_pwr_ex.h +++ /dev/null @@ -1,262 +0,0 @@ -/** - ****************************************************************************** - * @file stm32f7xx_hal_pwr_ex.h - * @author MCD Application Team - * @brief Header file of PWR HAL Extension module. - ****************************************************************************** - * @attention - * - *

© Copyright (c) 2017 STMicroelectronics. - * All rights reserved.

- * - * This software component is licensed by ST under BSD 3-Clause license, - * the "License"; You may not use this file except in compliance with the - * License. You may obtain a copy of the License at: - * opensource.org/licenses/BSD-3-Clause - * - ****************************************************************************** - */ - -/* Define to prevent recursive inclusion -------------------------------------*/ -#ifndef __STM32F7xx_HAL_PWR_EX_H -#define __STM32F7xx_HAL_PWR_EX_H - -#ifdef __cplusplus - extern "C" { -#endif - -/* Includes ------------------------------------------------------------------*/ -#include "stm32f7xx_hal_def.h" - -/** @addtogroup STM32F7xx_HAL_Driver - * @{ - */ - -/** @addtogroup PWREx - * @{ - */ - -/* Exported types ------------------------------------------------------------*/ -/* Exported constants --------------------------------------------------------*/ -/** @defgroup PWREx_Exported_Constants PWREx Exported Constants - * @{ - */ -/** @defgroup PWREx_WakeUp_Pins PWREx Wake Up Pins - * @{ - */ -#define PWR_WAKEUP_PIN1 PWR_CSR2_EWUP1 -#define PWR_WAKEUP_PIN2 PWR_CSR2_EWUP2 -#define PWR_WAKEUP_PIN3 PWR_CSR2_EWUP3 -#define PWR_WAKEUP_PIN4 PWR_CSR2_EWUP4 -#define PWR_WAKEUP_PIN5 PWR_CSR2_EWUP5 -#define PWR_WAKEUP_PIN6 PWR_CSR2_EWUP6 -#define PWR_WAKEUP_PIN1_HIGH PWR_CSR2_EWUP1 -#define PWR_WAKEUP_PIN2_HIGH PWR_CSR2_EWUP2 -#define PWR_WAKEUP_PIN3_HIGH PWR_CSR2_EWUP3 -#define PWR_WAKEUP_PIN4_HIGH PWR_CSR2_EWUP4 -#define PWR_WAKEUP_PIN5_HIGH PWR_CSR2_EWUP5 -#define PWR_WAKEUP_PIN6_HIGH PWR_CSR2_EWUP6 -#define PWR_WAKEUP_PIN1_LOW (uint32_t)((PWR_CR2_WUPP1<<6) | PWR_CSR2_EWUP1) -#define PWR_WAKEUP_PIN2_LOW (uint32_t)((PWR_CR2_WUPP2<<6) | PWR_CSR2_EWUP2) -#define PWR_WAKEUP_PIN3_LOW (uint32_t)((PWR_CR2_WUPP3<<6) | PWR_CSR2_EWUP3) -#define PWR_WAKEUP_PIN4_LOW (uint32_t)((PWR_CR2_WUPP4<<6) | PWR_CSR2_EWUP4) -#define PWR_WAKEUP_PIN5_LOW (uint32_t)((PWR_CR2_WUPP5<<6) | PWR_CSR2_EWUP5) -#define PWR_WAKEUP_PIN6_LOW (uint32_t)((PWR_CR2_WUPP6<<6) | PWR_CSR2_EWUP6) - -/** - * @} - */ - -/** @defgroup PWREx_Regulator_state_in_UnderDrive_mode PWREx Regulator state in UnderDrive mode - * @{ - */ -#define PWR_MAINREGULATOR_UNDERDRIVE_ON PWR_CR1_MRUDS -#define PWR_LOWPOWERREGULATOR_UNDERDRIVE_ON ((uint32_t)(PWR_CR1_LPDS | PWR_CR1_LPUDS)) -/** - * @} - */ - -/** @defgroup PWREx_Over_Under_Drive_Flag PWREx Over Under Drive Flag - * @{ - */ -#define PWR_FLAG_ODRDY PWR_CSR1_ODRDY -#define PWR_FLAG_ODSWRDY PWR_CSR1_ODSWRDY -#define PWR_FLAG_UDRDY PWR_CSR1_UDRDY -/** - * @} - */ - -/** @defgroup PWREx_Wakeup_Pins_Flag PWREx Wake Up Pin Flags - * @{ - */ -#define PWR_WAKEUP_PIN_FLAG1 PWR_CSR2_WUPF1 -#define PWR_WAKEUP_PIN_FLAG2 PWR_CSR2_WUPF2 -#define PWR_WAKEUP_PIN_FLAG3 PWR_CSR2_WUPF3 -#define PWR_WAKEUP_PIN_FLAG4 PWR_CSR2_WUPF4 -#define PWR_WAKEUP_PIN_FLAG5 PWR_CSR2_WUPF5 -#define PWR_WAKEUP_PIN_FLAG6 PWR_CSR2_WUPF6 -/** - * @} - */ - -/** - * @} - */ - -/* Exported macro ------------------------------------------------------------*/ -/** @defgroup PWREx_Exported_Macro PWREx Exported Macro - * @{ - */ -/** @brief Macros to enable or disable the Over drive mode. - */ -#define __HAL_PWR_OVERDRIVE_ENABLE() (PWR->CR1 |= (uint32_t)PWR_CR1_ODEN) -#define __HAL_PWR_OVERDRIVE_DISABLE() (PWR->CR1 &= (uint32_t)(~PWR_CR1_ODEN)) - -/** @brief Macros to enable or disable the Over drive switching. - */ -#define __HAL_PWR_OVERDRIVESWITCHING_ENABLE() (PWR->CR1 |= (uint32_t)PWR_CR1_ODSWEN) -#define __HAL_PWR_OVERDRIVESWITCHING_DISABLE() (PWR->CR1 &= (uint32_t)(~PWR_CR1_ODSWEN)) - -/** @brief Macros to enable or disable the Under drive mode. - * @note This mode is enabled only with STOP low power mode. - * In this mode, the 1.2V domain is preserved in reduced leakage mode. This - * mode is only available when the main regulator or the low power regulator - * is in low voltage mode. - * @note If the Under-drive mode was enabled, it is automatically disabled after - * exiting Stop mode. - * When the voltage regulator operates in Under-drive mode, an additional - * startup delay is induced when waking up from Stop mode. - */ -#define __HAL_PWR_UNDERDRIVE_ENABLE() (PWR->CR1 |= (uint32_t)PWR_CR1_UDEN) -#define __HAL_PWR_UNDERDRIVE_DISABLE() (PWR->CR1 &= (uint32_t)(~PWR_CR1_UDEN)) - -/** @brief Check PWR flag is set or not. - * @param __FLAG__ specifies the flag to check. - * This parameter can be one of the following values: - * @arg PWR_FLAG_ODRDY: This flag indicates that the Over-drive mode - * is ready - * @arg PWR_FLAG_ODSWRDY: This flag indicates that the Over-drive mode - * switching is ready - * @arg PWR_FLAG_UDRDY: This flag indicates that the Under-drive mode - * is enabled in Stop mode - * @retval The new state of __FLAG__ (TRUE or FALSE). - */ -#define __HAL_PWR_GET_ODRUDR_FLAG(__FLAG__) ((PWR->CSR1 & (__FLAG__)) == (__FLAG__)) - -/** @brief Clear the Under-Drive Ready flag. - */ -#define __HAL_PWR_CLEAR_ODRUDR_FLAG() (PWR->CSR1 |= PWR_FLAG_UDRDY) - -/** @brief Check Wake Up flag is set or not. - * @param __WUFLAG__ specifies the Wake Up flag to check. - * This parameter can be one of the following values: - * @arg PWR_WAKEUP_PIN_FLAG1: Wakeup Pin Flag for PA0 - * @arg PWR_WAKEUP_PIN_FLAG2: Wakeup Pin Flag for PA2 - * @arg PWR_WAKEUP_PIN_FLAG3: Wakeup Pin Flag for PC1 - * @arg PWR_WAKEUP_PIN_FLAG4: Wakeup Pin Flag for PC13 - * @arg PWR_WAKEUP_PIN_FLAG5: Wakeup Pin Flag for PI8 - * @arg PWR_WAKEUP_PIN_FLAG6: Wakeup Pin Flag for PI11 - */ -#define __HAL_PWR_GET_WAKEUP_FLAG(__WUFLAG__) (PWR->CSR2 & (__WUFLAG__)) - -/** @brief Clear the WakeUp pins flags. - * @param __WUFLAG__ specifies the Wake Up pin flag to clear. - * This parameter can be one of the following values: - * @arg PWR_WAKEUP_PIN_FLAG1: Wakeup Pin Flag for PA0 - * @arg PWR_WAKEUP_PIN_FLAG2: Wakeup Pin Flag for PA2 - * @arg PWR_WAKEUP_PIN_FLAG3: Wakeup Pin Flag for PC1 - * @arg PWR_WAKEUP_PIN_FLAG4: Wakeup Pin Flag for PC13 - * @arg PWR_WAKEUP_PIN_FLAG5: Wakeup Pin Flag for PI8 - * @arg PWR_WAKEUP_PIN_FLAG6: Wakeup Pin Flag for PI11 - */ -#define __HAL_PWR_CLEAR_WAKEUP_FLAG(__WUFLAG__) (PWR->CR2 |= (__WUFLAG__)) -/** - * @} - */ -/* Exported functions --------------------------------------------------------*/ -/** @addtogroup PWREx_Exported_Functions PWREx Exported Functions - * @{ - */ - -/** @addtogroup PWREx_Exported_Functions_Group1 - * @{ - */ -uint32_t HAL_PWREx_GetVoltageRange(void); -HAL_StatusTypeDef HAL_PWREx_ControlVoltageScaling(uint32_t VoltageScaling); - -void HAL_PWREx_EnableFlashPowerDown(void); -void HAL_PWREx_DisableFlashPowerDown(void); -HAL_StatusTypeDef HAL_PWREx_EnableBkUpReg(void); -HAL_StatusTypeDef HAL_PWREx_DisableBkUpReg(void); - -void HAL_PWREx_EnableMainRegulatorLowVoltage(void); -void HAL_PWREx_DisableMainRegulatorLowVoltage(void); -void HAL_PWREx_EnableLowRegulatorLowVoltage(void); -void HAL_PWREx_DisableLowRegulatorLowVoltage(void); - -HAL_StatusTypeDef HAL_PWREx_EnableOverDrive(void); -HAL_StatusTypeDef HAL_PWREx_DisableOverDrive(void); -HAL_StatusTypeDef HAL_PWREx_EnterUnderDriveSTOPMode(uint32_t Regulator, uint8_t STOPEntry); - -/** - * @} - */ - -/** - * @} - */ -/* Private types -------------------------------------------------------------*/ -/* Private variables ---------------------------------------------------------*/ -/* Private constants ---------------------------------------------------------*/ -/* Private macros ------------------------------------------------------------*/ -/** @defgroup PWREx_Private_Macros PWREx Private Macros - * @{ - */ - -/** @defgroup PWREx_IS_PWR_Definitions PWREx Private macros to check input parameters - * @{ - */ -#define IS_PWR_REGULATOR_UNDERDRIVE(REGULATOR) (((REGULATOR) == PWR_MAINREGULATOR_UNDERDRIVE_ON) || \ - ((REGULATOR) == PWR_LOWPOWERREGULATOR_UNDERDRIVE_ON)) -#define IS_PWR_WAKEUP_PIN(__PIN__) (((__PIN__) == PWR_WAKEUP_PIN1) || \ - ((__PIN__) == PWR_WAKEUP_PIN2) || \ - ((__PIN__) == PWR_WAKEUP_PIN3) || \ - ((__PIN__) == PWR_WAKEUP_PIN4) || \ - ((__PIN__) == PWR_WAKEUP_PIN5) || \ - ((__PIN__) == PWR_WAKEUP_PIN6) || \ - ((__PIN__) == PWR_WAKEUP_PIN1_HIGH) || \ - ((__PIN__) == PWR_WAKEUP_PIN2_HIGH) || \ - ((__PIN__) == PWR_WAKEUP_PIN3_HIGH) || \ - ((__PIN__) == PWR_WAKEUP_PIN4_HIGH) || \ - ((__PIN__) == PWR_WAKEUP_PIN5_HIGH) || \ - ((__PIN__) == PWR_WAKEUP_PIN6_HIGH) || \ - ((__PIN__) == PWR_WAKEUP_PIN1_LOW) || \ - ((__PIN__) == PWR_WAKEUP_PIN2_LOW) || \ - ((__PIN__) == PWR_WAKEUP_PIN3_LOW) || \ - ((__PIN__) == PWR_WAKEUP_PIN4_LOW) || \ - ((__PIN__) == PWR_WAKEUP_PIN5_LOW) || \ - ((__PIN__) == PWR_WAKEUP_PIN6_LOW)) -/** - * @} - */ - -/** - * @} - */ - -/** - * @} - */ - -/** - * @} - */ - -#ifdef __cplusplus -} -#endif - - -#endif /* __STM32F7xx_HAL_PWR_EX_H */ - -/************************ (C) COPYRIGHT STMicroelectronics *****END OF FILE****/ diff --git a/test_dma/Drivers/STM32F7xx_HAL_Driver/Inc/stm32f7xx_hal_rcc.h b/test_dma/Drivers/STM32F7xx_HAL_Driver/Inc/stm32f7xx_hal_rcc.h deleted file mode 100644 index dfeb31b..0000000 --- a/test_dma/Drivers/STM32F7xx_HAL_Driver/Inc/stm32f7xx_hal_rcc.h +++ /dev/null @@ -1,1310 +0,0 @@ -/** - ****************************************************************************** - * @file stm32f7xx_hal_rcc.h - * @author MCD Application Team - * @brief Header file of RCC HAL module. - ****************************************************************************** - * @attention - * - *

© Copyright (c) 2017 STMicroelectronics. - * All rights reserved.

- * - * This software component is licensed by ST under BSD 3-Clause license, - * the "License"; You may not use this file except in compliance with the - * License. You may obtain a copy of the License at: - * opensource.org/licenses/BSD-3-Clause - * - ****************************************************************************** - */ - -/* Define to prevent recursive inclusion -------------------------------------*/ -#ifndef __STM32F7xx_HAL_RCC_H -#define __STM32F7xx_HAL_RCC_H - -#ifdef __cplusplus - extern "C" { -#endif - -/* Includes ------------------------------------------------------------------*/ -#include "stm32f7xx_hal_def.h" - -/* Include RCC HAL Extended module */ -/* (include on top of file since RCC structures are defined in extended file) */ -#include "stm32f7xx_hal_rcc_ex.h" - -/** @addtogroup STM32F7xx_HAL_Driver - * @{ - */ - -/** @addtogroup RCC - * @{ - */ - -/* Exported types ------------------------------------------------------------*/ - -/** @defgroup RCC_Exported_Types RCC Exported Types - * @{ - */ - -/** - * @brief RCC Internal/External Oscillator (HSE, HSI, LSE and LSI) configuration structure definition - */ -typedef struct -{ - uint32_t OscillatorType; /*!< The oscillators to be configured. - This parameter can be a value of @ref RCC_Oscillator_Type */ - - uint32_t HSEState; /*!< The new state of the HSE. - This parameter can be a value of @ref RCC_HSE_Config */ - - uint32_t LSEState; /*!< The new state of the LSE. - This parameter can be a value of @ref RCC_LSE_Config */ - - uint32_t HSIState; /*!< The new state of the HSI. - This parameter can be a value of @ref RCC_HSI_Config */ - - uint32_t HSICalibrationValue; /*!< The HSI calibration trimming value (default is RCC_HSICALIBRATION_DEFAULT). - This parameter must be a number between Min_Data = 0x00 and Max_Data = 0x1F */ - - uint32_t LSIState; /*!< The new state of the LSI. - This parameter can be a value of @ref RCC_LSI_Config */ - - RCC_PLLInitTypeDef PLL; /*!< PLL structure parameters */ - -}RCC_OscInitTypeDef; - -/** - * @brief RCC System, AHB and APB busses clock configuration structure definition - */ -typedef struct -{ - uint32_t ClockType; /*!< The clock to be configured. - This parameter can be a value of @ref RCC_System_Clock_Type */ - - uint32_t SYSCLKSource; /*!< The clock source (SYSCLKS) used as system clock. - This parameter can be a value of @ref RCC_System_Clock_Source */ - - uint32_t AHBCLKDivider; /*!< The AHB clock (HCLK) divider. This clock is derived from the system clock (SYSCLK). - This parameter can be a value of @ref RCC_AHB_Clock_Source */ - - uint32_t APB1CLKDivider; /*!< The APB1 clock (PCLK1) divider. This clock is derived from the AHB clock (HCLK). - This parameter can be a value of @ref RCC_APB1_APB2_Clock_Source */ - - uint32_t APB2CLKDivider; /*!< The APB2 clock (PCLK2) divider. This clock is derived from the AHB clock (HCLK). - This parameter can be a value of @ref RCC_APB1_APB2_Clock_Source */ - -}RCC_ClkInitTypeDef; - -/** - * @} - */ - -/* Exported constants --------------------------------------------------------*/ -/** @defgroup RCC_Exported_Constants RCC Exported Constants - * @{ - */ - -/** @defgroup RCC_Oscillator_Type Oscillator Type - * @{ - */ -#define RCC_OSCILLATORTYPE_NONE ((uint32_t)0x00000000U) -#define RCC_OSCILLATORTYPE_HSE ((uint32_t)0x00000001U) -#define RCC_OSCILLATORTYPE_HSI ((uint32_t)0x00000002U) -#define RCC_OSCILLATORTYPE_LSE ((uint32_t)0x00000004U) -#define RCC_OSCILLATORTYPE_LSI ((uint32_t)0x00000008U) -/** - * @} - */ - -/** @defgroup RCC_HSE_Config RCC HSE Config - * @{ - */ -#define RCC_HSE_OFF ((uint32_t)0x00000000U) -#define RCC_HSE_ON RCC_CR_HSEON -#define RCC_HSE_BYPASS ((uint32_t)(RCC_CR_HSEBYP | RCC_CR_HSEON)) -/** - * @} - */ - -/** @defgroup RCC_LSE_Config RCC LSE Config - * @{ - */ -#define RCC_LSE_OFF ((uint32_t)0x00000000U) -#define RCC_LSE_ON RCC_BDCR_LSEON -#define RCC_LSE_BYPASS ((uint32_t)(RCC_BDCR_LSEBYP | RCC_BDCR_LSEON)) -/** - * @} - */ - -/** @defgroup RCC_HSI_Config RCC HSI Config - * @{ - */ -#define RCC_HSI_OFF ((uint32_t)0x00000000U) -#define RCC_HSI_ON RCC_CR_HSION - -#define RCC_HSICALIBRATION_DEFAULT ((uint32_t)0x10U) /* Default HSI calibration trimming value */ -/** - * @} - */ - -/** @defgroup RCC_LSI_Config RCC LSI Config - * @{ - */ -#define RCC_LSI_OFF ((uint32_t)0x00000000U) -#define RCC_LSI_ON RCC_CSR_LSION -/** - * @} - */ - -/** @defgroup RCC_PLL_Config RCC PLL Config - * @{ - */ -#define RCC_PLL_NONE ((uint32_t)0x00000000U) -#define RCC_PLL_OFF ((uint32_t)0x00000001U) -#define RCC_PLL_ON ((uint32_t)0x00000002U) -/** - * @} - */ - -/** @defgroup RCC_PLLP_Clock_Divider PLLP Clock Divider - * @{ - */ -#define RCC_PLLP_DIV2 ((uint32_t)0x00000002U) -#define RCC_PLLP_DIV4 ((uint32_t)0x00000004U) -#define RCC_PLLP_DIV6 ((uint32_t)0x00000006U) -#define RCC_PLLP_DIV8 ((uint32_t)0x00000008U) -/** - * @} - */ - -/** @defgroup RCC_PLL_Clock_Source PLL Clock Source - * @{ - */ -#define RCC_PLLSOURCE_HSI RCC_PLLCFGR_PLLSRC_HSI -#define RCC_PLLSOURCE_HSE RCC_PLLCFGR_PLLSRC_HSE -/** - * @} - */ - -/** @defgroup RCC_System_Clock_Type RCC System Clock Type - * @{ - */ -#define RCC_CLOCKTYPE_SYSCLK ((uint32_t)0x00000001U) -#define RCC_CLOCKTYPE_HCLK ((uint32_t)0x00000002U) -#define RCC_CLOCKTYPE_PCLK1 ((uint32_t)0x00000004U) -#define RCC_CLOCKTYPE_PCLK2 ((uint32_t)0x00000008U) -/** - * @} - */ - -/** @defgroup RCC_System_Clock_Source RCC System Clock Source - * @{ - */ -#define RCC_SYSCLKSOURCE_HSI RCC_CFGR_SW_HSI -#define RCC_SYSCLKSOURCE_HSE RCC_CFGR_SW_HSE -#define RCC_SYSCLKSOURCE_PLLCLK RCC_CFGR_SW_PLL -/** - * @} - */ - - -/** @defgroup RCC_System_Clock_Source_Status System Clock Source Status - * @{ - */ -#define RCC_SYSCLKSOURCE_STATUS_HSI RCC_CFGR_SWS_HSI /*!< HSI used as system clock */ -#define RCC_SYSCLKSOURCE_STATUS_HSE RCC_CFGR_SWS_HSE /*!< HSE used as system clock */ -#define RCC_SYSCLKSOURCE_STATUS_PLLCLK RCC_CFGR_SWS_PLL /*!< PLL used as system clock */ -/** - * @} - */ - -/** @defgroup RCC_AHB_Clock_Source RCC AHB Clock Source - * @{ - */ -#define RCC_SYSCLK_DIV1 RCC_CFGR_HPRE_DIV1 -#define RCC_SYSCLK_DIV2 RCC_CFGR_HPRE_DIV2 -#define RCC_SYSCLK_DIV4 RCC_CFGR_HPRE_DIV4 -#define RCC_SYSCLK_DIV8 RCC_CFGR_HPRE_DIV8 -#define RCC_SYSCLK_DIV16 RCC_CFGR_HPRE_DIV16 -#define RCC_SYSCLK_DIV64 RCC_CFGR_HPRE_DIV64 -#define RCC_SYSCLK_DIV128 RCC_CFGR_HPRE_DIV128 -#define RCC_SYSCLK_DIV256 RCC_CFGR_HPRE_DIV256 -#define RCC_SYSCLK_DIV512 RCC_CFGR_HPRE_DIV512 -/** - * @} - */ - -/** @defgroup RCC_APB1_APB2_Clock_Source RCC APB1/APB2 Clock Source - * @{ - */ -#define RCC_HCLK_DIV1 RCC_CFGR_PPRE1_DIV1 -#define RCC_HCLK_DIV2 RCC_CFGR_PPRE1_DIV2 -#define RCC_HCLK_DIV4 RCC_CFGR_PPRE1_DIV4 -#define RCC_HCLK_DIV8 RCC_CFGR_PPRE1_DIV8 -#define RCC_HCLK_DIV16 RCC_CFGR_PPRE1_DIV16 -/** - * @} - */ - -/** @defgroup RCC_RTC_Clock_Source RCC RTC Clock Source - * @{ - */ -#define RCC_RTCCLKSOURCE_NO_CLK ((uint32_t)0x00000000U) -#define RCC_RTCCLKSOURCE_LSE ((uint32_t)0x00000100U) -#define RCC_RTCCLKSOURCE_LSI ((uint32_t)0x00000200U) -#define RCC_RTCCLKSOURCE_HSE_DIVX ((uint32_t)0x00000300U) -#define RCC_RTCCLKSOURCE_HSE_DIV2 ((uint32_t)0x00020300U) -#define RCC_RTCCLKSOURCE_HSE_DIV3 ((uint32_t)0x00030300U) -#define RCC_RTCCLKSOURCE_HSE_DIV4 ((uint32_t)0x00040300U) -#define RCC_RTCCLKSOURCE_HSE_DIV5 ((uint32_t)0x00050300U) -#define RCC_RTCCLKSOURCE_HSE_DIV6 ((uint32_t)0x00060300U) -#define RCC_RTCCLKSOURCE_HSE_DIV7 ((uint32_t)0x00070300U) -#define RCC_RTCCLKSOURCE_HSE_DIV8 ((uint32_t)0x00080300U) -#define RCC_RTCCLKSOURCE_HSE_DIV9 ((uint32_t)0x00090300U) -#define RCC_RTCCLKSOURCE_HSE_DIV10 ((uint32_t)0x000A0300U) -#define RCC_RTCCLKSOURCE_HSE_DIV11 ((uint32_t)0x000B0300U) -#define RCC_RTCCLKSOURCE_HSE_DIV12 ((uint32_t)0x000C0300U) -#define RCC_RTCCLKSOURCE_HSE_DIV13 ((uint32_t)0x000D0300U) -#define RCC_RTCCLKSOURCE_HSE_DIV14 ((uint32_t)0x000E0300U) -#define RCC_RTCCLKSOURCE_HSE_DIV15 ((uint32_t)0x000F0300U) -#define RCC_RTCCLKSOURCE_HSE_DIV16 ((uint32_t)0x00100300U) -#define RCC_RTCCLKSOURCE_HSE_DIV17 ((uint32_t)0x00110300U) -#define RCC_RTCCLKSOURCE_HSE_DIV18 ((uint32_t)0x00120300U) -#define RCC_RTCCLKSOURCE_HSE_DIV19 ((uint32_t)0x00130300U) -#define RCC_RTCCLKSOURCE_HSE_DIV20 ((uint32_t)0x00140300U) -#define RCC_RTCCLKSOURCE_HSE_DIV21 ((uint32_t)0x00150300U) -#define RCC_RTCCLKSOURCE_HSE_DIV22 ((uint32_t)0x00160300U) -#define RCC_RTCCLKSOURCE_HSE_DIV23 ((uint32_t)0x00170300U) -#define RCC_RTCCLKSOURCE_HSE_DIV24 ((uint32_t)0x00180300U) -#define RCC_RTCCLKSOURCE_HSE_DIV25 ((uint32_t)0x00190300U) -#define RCC_RTCCLKSOURCE_HSE_DIV26 ((uint32_t)0x001A0300U) -#define RCC_RTCCLKSOURCE_HSE_DIV27 ((uint32_t)0x001B0300U) -#define RCC_RTCCLKSOURCE_HSE_DIV28 ((uint32_t)0x001C0300U) -#define RCC_RTCCLKSOURCE_HSE_DIV29 ((uint32_t)0x001D0300U) -#define RCC_RTCCLKSOURCE_HSE_DIV30 ((uint32_t)0x001E0300U) -#define RCC_RTCCLKSOURCE_HSE_DIV31 ((uint32_t)0x001F0300U) -/** - * @} - */ - - - -/** @defgroup RCC_MCO_Index RCC MCO Index - * @{ - */ -#define RCC_MCO1 ((uint32_t)0x00000000U) -#define RCC_MCO2 ((uint32_t)0x00000001U) -/** - * @} - */ - -/** @defgroup RCC_MCO1_Clock_Source RCC MCO1 Clock Source - * @{ - */ -#define RCC_MCO1SOURCE_HSI ((uint32_t)0x00000000U) -#define RCC_MCO1SOURCE_LSE RCC_CFGR_MCO1_0 -#define RCC_MCO1SOURCE_HSE RCC_CFGR_MCO1_1 -#define RCC_MCO1SOURCE_PLLCLK RCC_CFGR_MCO1 -/** - * @} - */ - -/** @defgroup RCC_MCO2_Clock_Source RCC MCO2 Clock Source - * @{ - */ -#define RCC_MCO2SOURCE_SYSCLK ((uint32_t)0x00000000U) -#define RCC_MCO2SOURCE_PLLI2SCLK RCC_CFGR_MCO2_0 -#define RCC_MCO2SOURCE_HSE RCC_CFGR_MCO2_1 -#define RCC_MCO2SOURCE_PLLCLK RCC_CFGR_MCO2 -/** - * @} - */ - -/** @defgroup RCC_MCOx_Clock_Prescaler RCC MCO1 Clock Prescaler - * @{ - */ -#define RCC_MCODIV_1 ((uint32_t)0x00000000U) -#define RCC_MCODIV_2 RCC_CFGR_MCO1PRE_2 -#define RCC_MCODIV_3 ((uint32_t)RCC_CFGR_MCO1PRE_0 | RCC_CFGR_MCO1PRE_2) -#define RCC_MCODIV_4 ((uint32_t)RCC_CFGR_MCO1PRE_1 | RCC_CFGR_MCO1PRE_2) -#define RCC_MCODIV_5 RCC_CFGR_MCO1PRE -/** - * @} - */ - -/** @defgroup RCC_Interrupt RCC Interrupt - * @{ - */ -#define RCC_IT_LSIRDY ((uint8_t)0x01U) -#define RCC_IT_LSERDY ((uint8_t)0x02U) -#define RCC_IT_HSIRDY ((uint8_t)0x04U) -#define RCC_IT_HSERDY ((uint8_t)0x08U) -#define RCC_IT_PLLRDY ((uint8_t)0x10U) -#define RCC_IT_PLLI2SRDY ((uint8_t)0x20U) -#define RCC_IT_PLLSAIRDY ((uint8_t)0x40U) -#define RCC_IT_CSS ((uint8_t)0x80U) -/** - * @} - */ - -/** @defgroup RCC_Flag RCC Flags - * Elements values convention: 0XXYYYYYb - * - YYYYY : Flag position in the register - * - 0XX : Register index - * - 01: CR register - * - 10: BDCR register - * - 11: CSR register - * @{ - */ -/* Flags in the CR register */ -#define RCC_FLAG_HSIRDY ((uint8_t)0x21U) -#define RCC_FLAG_HSERDY ((uint8_t)0x31U) -#define RCC_FLAG_PLLRDY ((uint8_t)0x39U) -#define RCC_FLAG_PLLI2SRDY ((uint8_t)0x3BU) -#define RCC_FLAG_PLLSAIRDY ((uint8_t)0x3CU) - -/* Flags in the BDCR register */ -#define RCC_FLAG_LSERDY ((uint8_t)0x41U) - -/* Flags in the CSR register */ -#define RCC_FLAG_LSIRDY ((uint8_t)0x61U) -#define RCC_FLAG_BORRST ((uint8_t)0x79U) -#define RCC_FLAG_PINRST ((uint8_t)0x7AU) -#define RCC_FLAG_PORRST ((uint8_t)0x7BU) -#define RCC_FLAG_SFTRST ((uint8_t)0x7CU) -#define RCC_FLAG_IWDGRST ((uint8_t)0x7DU) -#define RCC_FLAG_WWDGRST ((uint8_t)0x7EU) -#define RCC_FLAG_LPWRRST ((uint8_t)0x7FU) -/** - * @} - */ - -/** @defgroup RCC_LSEDrive_Configuration RCC LSE Drive configurations - * @{ - */ -#define RCC_LSEDRIVE_LOW ((uint32_t)0x00000000U) -#define RCC_LSEDRIVE_MEDIUMLOW RCC_BDCR_LSEDRV_1 -#define RCC_LSEDRIVE_MEDIUMHIGH RCC_BDCR_LSEDRV_0 -#define RCC_LSEDRIVE_HIGH RCC_BDCR_LSEDRV -/** - * @} - */ - -/** - * @} - */ - -/* Exported macro ------------------------------------------------------------*/ -/** @defgroup RCC_Exported_Macros RCC Exported Macros - * @{ - */ - -/** @defgroup RCC_AHB1_Clock_Enable_Disable AHB1 Peripheral Clock Enable Disable - * @brief Enable or disable the AHB1 peripheral clock. - * @note After reset, the peripheral clock (used for registers read/write access) - * is disabled and the application software has to enable this clock before - * using it. - * @{ - */ -#define __HAL_RCC_CRC_CLK_ENABLE() do { \ - __IO uint32_t tmpreg; \ - SET_BIT(RCC->AHB1ENR, RCC_AHB1ENR_CRCEN);\ - /* Delay after an RCC peripheral clock enabling */ \ - tmpreg = READ_BIT(RCC->AHB1ENR, RCC_AHB1ENR_CRCEN);\ - UNUSED(tmpreg); \ - } while(0) - -#define __HAL_RCC_DMA1_CLK_ENABLE() do { \ - __IO uint32_t tmpreg; \ - SET_BIT(RCC->AHB1ENR, RCC_AHB1ENR_DMA1EN);\ - /* Delay after an RCC peripheral clock enabling */ \ - tmpreg = READ_BIT(RCC->AHB1ENR, RCC_AHB1ENR_DMA1EN);\ - UNUSED(tmpreg); \ - } while(0) - -#define __HAL_RCC_CRC_CLK_DISABLE() (RCC->AHB1ENR &= ~(RCC_AHB1ENR_CRCEN)) -#define __HAL_RCC_DMA1_CLK_DISABLE() (RCC->AHB1ENR &= ~(RCC_AHB1ENR_DMA1EN)) - -/** - * @} - */ - -/** @defgroup RCC_APB1_Clock_Enable_Disable APB1 Peripheral Clock Enable Disable - * @brief Enable or disable the Low Speed APB (APB1) peripheral clock. - * @note After reset, the peripheral clock (used for registers read/write access) - * is disabled and the application software has to enable this clock before - * using it. - * @{ - */ -#define __HAL_RCC_WWDG_CLK_ENABLE() do { \ - __IO uint32_t tmpreg; \ - SET_BIT(RCC->APB1ENR, RCC_APB1ENR_WWDGEN);\ - /* Delay after an RCC peripheral clock enabling */ \ - tmpreg = READ_BIT(RCC->APB1ENR, RCC_APB1ENR_WWDGEN);\ - UNUSED(tmpreg); \ - } while(0) - -#define __HAL_RCC_PWR_CLK_ENABLE() do { \ - __IO uint32_t tmpreg; \ - SET_BIT(RCC->APB1ENR, RCC_APB1ENR_PWREN);\ - /* Delay after an RCC peripheral clock enabling */ \ - tmpreg = READ_BIT(RCC->APB1ENR, RCC_APB1ENR_PWREN);\ - UNUSED(tmpreg); \ - } while(0) - -#define __HAL_RCC_WWDG_CLK_DISABLE() (RCC->APB1ENR &= ~(RCC_APB1ENR_WWDGEN)) -#define __HAL_RCC_PWR_CLK_DISABLE() (RCC->APB1ENR &= ~(RCC_APB1ENR_PWREN)) -/** - * @} - */ - -/** @defgroup RCC_APB2_Clock_Enable_Disable APB2 Peripheral Clock Enable Disable - * @brief Enable or disable the High Speed APB (APB2) peripheral clock. - * @note After reset, the peripheral clock (used for registers read/write access) - * is disabled and the application software has to enable this clock before - * using it. - * @{ - */ -#define __HAL_RCC_SYSCFG_CLK_ENABLE() do { \ - __IO uint32_t tmpreg; \ - SET_BIT(RCC->APB2ENR, RCC_APB2ENR_SYSCFGEN);\ - /* Delay after an RCC peripheral clock enabling */ \ - tmpreg = READ_BIT(RCC->APB2ENR, RCC_APB2ENR_SYSCFGEN);\ - UNUSED(tmpreg); \ - } while(0) - -#define __HAL_RCC_SYSCFG_CLK_DISABLE() (RCC->APB2ENR &= ~(RCC_APB2ENR_SYSCFGEN)) - -/** - * @} - */ - -/** @defgroup RCC_AHB1_Peripheral_Clock_Enable_Disable_Status AHB1 Peripheral Clock Enable Disable Status - * @brief Get the enable or disable status of the AHB1 peripheral clock. - * @note After reset, the peripheral clock (used for registers read/write access) - * is disabled and the application software has to enable this clock before - * using it. - * @{ - */ -#define __HAL_RCC_CRC_IS_CLK_ENABLED() ((RCC->AHB1ENR & (RCC_AHB1ENR_CRCEN)) != RESET) -#define __HAL_RCC_DMA1_IS_CLK_ENABLED() ((RCC->AHB1ENR & (RCC_AHB1ENR_DMA1EN)) != RESET) - -#define __HAL_RCC_CRC_IS_CLK_DISABLED() ((RCC->AHB1ENR & (RCC_AHB1ENR_CRCEN)) == RESET) -#define __HAL_RCC_DMA1_IS_CLK_DISABLED() ((RCC->AHB1ENR & (RCC_AHB1ENR_DMA1EN)) == RESET) -/** - * @} - */ - -/** @defgroup RCC_APB1_Clock_Enable_Disable_Status APB1 Peripheral Clock Enable Disable Status - * @brief Get the enable or disable status of the APB1 peripheral clock. - * @note After reset, the peripheral clock (used for registers read/write access) - * is disabled and the application software has to enable this clock before - * using it. - * @{ - */ -#define __HAL_RCC_WWDG_IS_CLK_ENABLED() ((RCC->APB1ENR & (RCC_APB1ENR_WWDGEN)) != RESET) -#define __HAL_RCC_PWR_IS_CLK_ENABLED() ((RCC->APB1ENR & (RCC_APB1ENR_PWREN)) != RESET) - -#define __HAL_RCC_WWDG_IS_CLK_DISABLED() ((RCC->APB1ENR & (RCC_APB1ENR_WWDGEN)) == RESET) -#define __HAL_RCC_PWR_IS_CLK_DISABLED() ((RCC->APB1ENR & (RCC_APB1ENR_PWREN)) == RESET) -/** - * @} - */ - -/** @defgroup RCC_APB2_Clock_Enable_Disable_Status APB2 Peripheral Clock Enable Disable Status - * @brief EGet the enable or disable status of the APB2 peripheral clock. - * @note After reset, the peripheral clock (used for registers read/write access) - * is disabled and the application software has to enable this clock before - * using it. - * @{ - */ -#define __HAL_RCC_SYSCFG_IS_CLK_ENABLED() ((RCC->APB2ENR & (RCC_APB2ENR_SYSCFGEN)) != RESET) -#define __HAL_RCC_SYSCFG_IS_CLK_DISABLED() ((RCC->APB2ENR & (RCC_APB2ENR_SYSCFGEN)) == RESET) -/** - * @} - */ - -/** @defgroup RCC_Peripheral_Clock_Force_Release RCC Peripheral Clock Force Release - * @brief Force or release AHB peripheral reset. - * @{ - */ -#define __HAL_RCC_AHB1_FORCE_RESET() (RCC->AHB1RSTR = 0xFFFFFFFFU) -#define __HAL_RCC_CRC_FORCE_RESET() (RCC->AHB1RSTR |= (RCC_AHB1RSTR_CRCRST)) -#define __HAL_RCC_DMA1_FORCE_RESET() (RCC->AHB1RSTR |= (RCC_AHB1RSTR_DMA1RST)) - -#define __HAL_RCC_AHB1_RELEASE_RESET() (RCC->AHB1RSTR = 0x00U) -#define __HAL_RCC_CRC_RELEASE_RESET() (RCC->AHB1RSTR &= ~(RCC_AHB1RSTR_CRCRST)) -#define __HAL_RCC_DMA1_RELEASE_RESET() (RCC->AHB1RSTR &= ~(RCC_AHB1RSTR_DMA1RST)) -/** - * @} - */ - -/** @defgroup RCC_APB1_Force_Release_Reset APB1 Force Release Reset - * @brief Force or release APB1 peripheral reset. - * @{ - */ -#define __HAL_RCC_APB1_FORCE_RESET() (RCC->APB1RSTR = 0xFFFFFFFFU) -#define __HAL_RCC_WWDG_FORCE_RESET() (RCC->APB1RSTR |= (RCC_APB1RSTR_WWDGRST)) -#define __HAL_RCC_PWR_FORCE_RESET() (RCC->APB1RSTR |= (RCC_APB1RSTR_PWRRST)) - -#define __HAL_RCC_APB1_RELEASE_RESET() (RCC->APB1RSTR = 0x00U) -#define __HAL_RCC_WWDG_RELEASE_RESET() (RCC->APB1RSTR &= ~(RCC_APB1RSTR_WWDGRST)) -#define __HAL_RCC_PWR_RELEASE_RESET() (RCC->APB1RSTR &= ~(RCC_APB1RSTR_PWRRST)) -/** - * @} - */ - -/** @defgroup RCC_APB2_Force_Release_Reset APB2 Force Release Reset - * @brief Force or release APB2 peripheral reset. - * @{ - */ -#define __HAL_RCC_APB2_FORCE_RESET() (RCC->APB2RSTR = 0xFFFFFFFFU) -#define __HAL_RCC_SYSCFG_FORCE_RESET() (RCC->APB2RSTR |= (RCC_APB2RSTR_SYSCFGRST)) - -#define __HAL_RCC_APB2_RELEASE_RESET() (RCC->APB2RSTR = 0x00U) -#define __HAL_RCC_SYSCFG_RELEASE_RESET() (RCC->APB2RSTR &= ~(RCC_APB2RSTR_SYSCFGRST)) - -/** - * @} - */ - -/** @defgroup RCC_Peripheral_Clock_Sleep_Enable_Disable RCC Peripheral Clock Sleep Enable Disable - * @note Peripheral clock gating in SLEEP mode can be used to further reduce - * power consumption. - * @note After wakeup from SLEEP mode, the peripheral clock is enabled again. - * @note By default, all peripheral clocks are enabled during SLEEP mode. - * @{ - */ -#define __HAL_RCC_CRC_CLK_SLEEP_ENABLE() (RCC->AHB1LPENR |= (RCC_AHB1LPENR_CRCLPEN)) -#define __HAL_RCC_DMA1_CLK_SLEEP_ENABLE() (RCC->AHB1LPENR |= (RCC_AHB1LPENR_DMA1LPEN)) - -#define __HAL_RCC_CRC_CLK_SLEEP_DISABLE() (RCC->AHB1LPENR &= ~(RCC_AHB1LPENR_CRCLPEN)) -#define __HAL_RCC_DMA1_CLK_SLEEP_DISABLE() (RCC->AHB1LPENR &= ~(RCC_AHB1LPENR_DMA1LPEN)) - -/** @brief Enable or disable the APB1 peripheral clock during Low Power (Sleep) mode. - * @note Peripheral clock gating in SLEEP mode can be used to further reduce - * power consumption. - * @note After wakeup from SLEEP mode, the peripheral clock is enabled again. - * @note By default, all peripheral clocks are enabled during SLEEP mode. - */ -#define __HAL_RCC_WWDG_CLK_SLEEP_ENABLE() (RCC->APB1LPENR |= (RCC_APB1LPENR_WWDGLPEN)) -#define __HAL_RCC_PWR_CLK_SLEEP_ENABLE() (RCC->APB1LPENR |= (RCC_APB1LPENR_PWRLPEN)) - -#define __HAL_RCC_WWDG_CLK_SLEEP_DISABLE() (RCC->APB1LPENR &= ~(RCC_APB1LPENR_WWDGLPEN)) -#define __HAL_RCC_PWR_CLK_SLEEP_DISABLE() (RCC->APB1LPENR &= ~(RCC_APB1LPENR_PWRLPEN)) - -/** @brief Enable or disable the APB2 peripheral clock during Low Power (Sleep) mode. - * @note Peripheral clock gating in SLEEP mode can be used to further reduce - * power consumption. - * @note After wakeup from SLEEP mode, the peripheral clock is enabled again. - * @note By default, all peripheral clocks are enabled during SLEEP mode. - */ -#define __HAL_RCC_SYSCFG_CLK_SLEEP_ENABLE() (RCC->APB2LPENR |= (RCC_APB2LPENR_SYSCFGLPEN)) -#define __HAL_RCC_SYSCFG_CLK_SLEEP_DISABLE() (RCC->APB2LPENR &= ~(RCC_APB2LPENR_SYSCFGLPEN)) - -/** - * @} - */ - -/** @defgroup RCC_AHB1_Clock_Sleep_Enable_Disable_Status AHB1 Peripheral Clock Sleep Enable Disable Status - * @brief Get the enable or disable status of the AHB1 peripheral clock during Low Power (Sleep) mode. - * @note Peripheral clock gating in SLEEP mode can be used to further reduce - * power consumption. - * @note After wakeup from SLEEP mode, the peripheral clock is enabled again. - * @note By default, all peripheral clocks are enabled during SLEEP mode. - * @{ - */ -#define __HAL_RCC_CRC_IS_CLK_SLEEP_ENABLED() ((RCC->AHB1LPENR & (RCC_AHB1LPENR_CRCLPEN)) != RESET) -#define __HAL_RCC_DMA1_IS_CLK_SLEEP_ENABLED() ((RCC->AHB1LPENR & (RCC_AHB1LPENR_DMA1LPEN)) != RESET) - -#define __HAL_RCC_CRC_IS_CLK_SLEEP_DISABLED() ((RCC->AHB1LPENR & (RCC_AHB1LPENR_CRCLPEN)) == RESET) -#define __HAL_RCC_DMA1_IS_CLK_SLEEP_DISABLED() ((RCC->AHB1LPENR & (RCC_AHB1LPENR_DMA1LPEN)) == RESET) -/** - * @} - */ - -/** @defgroup RCC_APB1_Clock_Sleep_Enable_Disable_Status APB1 Peripheral Clock Sleep Enable Disable Status - * @brief Get the enable or disable status of the APB1 peripheral clock during Low Power (Sleep) mode. - * @note Peripheral clock gating in SLEEP mode can be used to further reduce - * power consumption. - * @note After wakeup from SLEEP mode, the peripheral clock is enabled again. - * @note By default, all peripheral clocks are enabled during SLEEP mode. - * @{ - */ -#define __HAL_RCC_WWDG_IS_CLK_SLEEP_ENABLED() ((RCC->APB1LPENR & (RCC_APB1LPENR_WWDGLPEN)) != RESET) -#define __HAL_RCC_PWR_IS_CLK_SLEEP_ENABLED() ((RCC->APB1LPENR & (RCC_APB1LPENR_PWRLPEN)) != RESET) - -#define __HAL_RCC_WWDG_IS_CLK_SLEEP_DISABLED() ((RCC->APB1LPENR & (RCC_APB1LPENR_WWDGLPEN)) == RESET) -#define __HAL_RCC_PWR_IS_CLK_SLEEP_DISABLED() ((RCC->APB1LPENR & (RCC_APB1LPENR_PWRLPEN)) == RESET) -/** - * @} - */ - -/** @defgroup RCC_APB2_Clock_Sleep_Enable_Disable_Status APB2 Peripheral Clock Sleep Enable Disable Status - * @brief Get the enable or disable status of the APB2 peripheral clock during Low Power (Sleep) mode. - * @note Peripheral clock gating in SLEEP mode can be used to further reduce - * power consumption. - * @note After wakeup from SLEEP mode, the peripheral clock is enabled again. - * @note By default, all peripheral clocks are enabled during SLEEP mode. - * @{ - */ -#define __HAL_RCC_SYSCFG_IS_CLK_SLEEP_ENABLED() ((RCC->APB2LPENR & (RCC_APB2LPENR_SYSCFGLPEN)) != RESET) -#define __HAL_RCC_SYSCFG_IS_CLK_SLEEP_DISABLED() ((RCC->APB2LPENR & (RCC_APB2LPENR_SYSCFGLPEN)) == RESET) -/** - * @} - */ - -/** @defgroup RCC_HSI_Configuration HSI Configuration - * @{ - */ - -/** @brief Macros to enable or disable the Internal High Speed oscillator (HSI). - * @note The HSI is stopped by hardware when entering STOP and STANDBY modes. - * It is used (enabled by hardware) as system clock source after startup - * from Reset, wakeup from STOP and STANDBY mode, or in case of failure - * of the HSE used directly or indirectly as system clock (if the Clock - * Security System CSS is enabled). - * @note HSI can not be stopped if it is used as system clock source. In this case, - * you have to select another source of the system clock then stop the HSI. - * @note After enabling the HSI, the application software should wait on HSIRDY - * flag to be set indicating that HSI clock is stable and can be used as - * system clock source. - * @note When the HSI is stopped, HSIRDY flag goes low after 6 HSI oscillator - * clock cycles. - */ -#define __HAL_RCC_HSI_ENABLE() (RCC->CR |= (RCC_CR_HSION)) -#define __HAL_RCC_HSI_DISABLE() (RCC->CR &= ~(RCC_CR_HSION)) - -/** @brief Macro to adjust the Internal High Speed oscillator (HSI) calibration value. - * @note The calibration is used to compensate for the variations in voltage - * and temperature that influence the frequency of the internal HSI RC. - * @param __HSICALIBRATIONVALUE__ specifies the calibration trimming value. - * (default is RCC_HSICALIBRATION_DEFAULT). - */ -#define __HAL_RCC_HSI_CALIBRATIONVALUE_ADJUST(__HSICALIBRATIONVALUE__) (MODIFY_REG(RCC->CR,\ - RCC_CR_HSITRIM, (uint32_t)(__HSICALIBRATIONVALUE__) << RCC_CR_HSITRIM_Pos)) -/** - * @} - */ - -/** @defgroup RCC_LSI_Configuration LSI Configuration - * @{ - */ - -/** @brief Macros to enable or disable the Internal Low Speed oscillator (LSI). - * @note After enabling the LSI, the application software should wait on - * LSIRDY flag to be set indicating that LSI clock is stable and can - * be used to clock the IWDG and/or the RTC. - * @note LSI can not be disabled if the IWDG is running. - * @note When the LSI is stopped, LSIRDY flag goes low after 6 LSI oscillator - * clock cycles. - */ -#define __HAL_RCC_LSI_ENABLE() (RCC->CSR |= (RCC_CSR_LSION)) -#define __HAL_RCC_LSI_DISABLE() (RCC->CSR &= ~(RCC_CSR_LSION)) -/** - * @} - */ - -/** @defgroup RCC_HSE_Configuration HSE Configuration - * @{ - */ -/** - * @brief Macro to configure the External High Speed oscillator (HSE). - * @note Transitions HSE Bypass to HSE On and HSE On to HSE Bypass are not - * supported by this macro. User should request a transition to HSE Off - * first and then HSE On or HSE Bypass. - * @note After enabling the HSE (RCC_HSE_ON or RCC_HSE_Bypass), the application - * software should wait on HSERDY flag to be set indicating that HSE clock - * is stable and can be used to clock the PLL and/or system clock. - * @note HSE state can not be changed if it is used directly or through the - * PLL as system clock. In this case, you have to select another source - * of the system clock then change the HSE state (ex. disable it). - * @note The HSE is stopped by hardware when entering STOP and STANDBY modes. - * @note This function reset the CSSON bit, so if the clock security system(CSS) - * was previously enabled you have to enable it again after calling this - * function. - * @param __STATE__ specifies the new state of the HSE. - * This parameter can be one of the following values: - * @arg RCC_HSE_OFF: turn OFF the HSE oscillator, HSERDY flag goes low after - * 6 HSE oscillator clock cycles. - * @arg RCC_HSE_ON: turn ON the HSE oscillator. - * @arg RCC_HSE_BYPASS: HSE oscillator bypassed with external clock. - */ -#define __HAL_RCC_HSE_CONFIG(__STATE__) \ - do { \ - if ((__STATE__) == RCC_HSE_ON) \ - { \ - SET_BIT(RCC->CR, RCC_CR_HSEON); \ - } \ - else if ((__STATE__) == RCC_HSE_OFF) \ - { \ - CLEAR_BIT(RCC->CR, RCC_CR_HSEON); \ - CLEAR_BIT(RCC->CR, RCC_CR_HSEBYP); \ - } \ - else if ((__STATE__) == RCC_HSE_BYPASS) \ - { \ - SET_BIT(RCC->CR, RCC_CR_HSEBYP); \ - SET_BIT(RCC->CR, RCC_CR_HSEON); \ - } \ - else \ - { \ - CLEAR_BIT(RCC->CR, RCC_CR_HSEON); \ - CLEAR_BIT(RCC->CR, RCC_CR_HSEBYP); \ - } \ - } while(0) -/** - * @} - */ - -/** @defgroup RCC_LSE_Configuration LSE Configuration - * @{ - */ - -/** - * @brief Macro to configure the External Low Speed oscillator (LSE). - * @note Transitions LSE Bypass to LSE On and LSE On to LSE Bypass are not supported by this macro. - * User should request a transition to LSE Off first and then LSE On or LSE Bypass. - * @note As the LSE is in the Backup domain and write access is denied to - * this domain after reset, you have to enable write access using - * HAL_PWR_EnableBkUpAccess() function before to configure the LSE - * (to be done once after reset). - * @note After enabling the LSE (RCC_LSE_ON or RCC_LSE_BYPASS), the application - * software should wait on LSERDY flag to be set indicating that LSE clock - * is stable and can be used to clock the RTC. - * @param __STATE__ specifies the new state of the LSE. - * This parameter can be one of the following values: - * @arg RCC_LSE_OFF: turn OFF the LSE oscillator, LSERDY flag goes low after - * 6 LSE oscillator clock cycles. - * @arg RCC_LSE_ON: turn ON the LSE oscillator. - * @arg RCC_LSE_BYPASS: LSE oscillator bypassed with external clock. - */ -#define __HAL_RCC_LSE_CONFIG(__STATE__) \ - do { \ - if((__STATE__) == RCC_LSE_ON) \ - { \ - SET_BIT(RCC->BDCR, RCC_BDCR_LSEON); \ - } \ - else if((__STATE__) == RCC_LSE_OFF) \ - { \ - CLEAR_BIT(RCC->BDCR, RCC_BDCR_LSEON); \ - CLEAR_BIT(RCC->BDCR, RCC_BDCR_LSEBYP); \ - } \ - else if((__STATE__) == RCC_LSE_BYPASS) \ - { \ - SET_BIT(RCC->BDCR, RCC_BDCR_LSEBYP); \ - SET_BIT(RCC->BDCR, RCC_BDCR_LSEON); \ - } \ - else \ - { \ - CLEAR_BIT(RCC->BDCR, RCC_BDCR_LSEON); \ - CLEAR_BIT(RCC->BDCR, RCC_BDCR_LSEBYP); \ - } \ - } while(0) -/** - * @} - */ - -/** @defgroup RCC_Internal_RTC_Clock_Configuration RTC Clock Configuration - * @{ - */ - -/** @brief Macros to enable or disable the RTC clock. - * @note These macros must be used only after the RTC clock source was selected. - */ -#define __HAL_RCC_RTC_ENABLE() (RCC->BDCR |= (RCC_BDCR_RTCEN)) -#define __HAL_RCC_RTC_DISABLE() (RCC->BDCR &= ~(RCC_BDCR_RTCEN)) - -/** @brief Macros to configure the RTC clock (RTCCLK). - * @note As the RTC clock configuration bits are in the Backup domain and write - * access is denied to this domain after reset, you have to enable write - * access using the Power Backup Access macro before to configure - * the RTC clock source (to be done once after reset). - * @note Once the RTC clock is configured it can't be changed unless the - * Backup domain is reset using __HAL_RCC_BackupReset_RELEASE() macro, or by - * a Power On Reset (POR). - * @param __RTCCLKSource__ specifies the RTC clock source. - * This parameter can be one of the following values: - @arg @ref RCC_RTCCLKSOURCE_NO_CLK: No clock selected as RTC clock. - * @arg @ref RCC_RTCCLKSOURCE_LSE: LSE selected as RTC clock. - * @arg @ref RCC_RTCCLKSOURCE_LSI: LSI selected as RTC clock. - * @arg @ref RCC_RTCCLKSOURCE_HSE_DIVX: HSE clock divided by x selected - * as RTC clock, where x:[2,31] - * @note If the LSE or LSI is used as RTC clock source, the RTC continues to - * work in STOP and STANDBY modes, and can be used as wakeup source. - * However, when the HSE clock is used as RTC clock source, the RTC - * cannot be used in STOP and STANDBY modes. - * @note The maximum input clock frequency for RTC is 1MHz (when using HSE as - * RTC clock source). - */ -#define __HAL_RCC_RTC_CLKPRESCALER(__RTCCLKSource__) (((__RTCCLKSource__) & RCC_BDCR_RTCSEL) == RCC_BDCR_RTCSEL) ? \ - MODIFY_REG(RCC->CFGR, RCC_CFGR_RTCPRE, ((__RTCCLKSource__) & 0xFFFFCFF)) : CLEAR_BIT(RCC->CFGR, RCC_CFGR_RTCPRE) - -#define __HAL_RCC_RTC_CONFIG(__RTCCLKSource__) do { __HAL_RCC_RTC_CLKPRESCALER(__RTCCLKSource__); \ - RCC->BDCR |= ((__RTCCLKSource__) & 0x00000FFF); \ - } while (0) - -/** @brief Macro to get the RTC clock source. - * @retval The clock source can be one of the following values: - * @arg @ref RCC_RTCCLKSOURCE_NO_CLK No clock selected as RTC clock - * @arg @ref RCC_RTCCLKSOURCE_LSE LSE selected as RTC clock - * @arg @ref RCC_RTCCLKSOURCE_LSI LSI selected as RTC clock - * @arg @ref RCC_RTCCLKSOURCE_HSE_DIVX HSE divided by X selected as RTC clock (X can be retrieved thanks to @ref __HAL_RCC_GET_RTC_HSE_PRESCALER() - */ -#define __HAL_RCC_GET_RTC_SOURCE() (READ_BIT(RCC->BDCR, RCC_BDCR_RTCSEL)) - -/** - * @brief Get the RTC and HSE clock divider (RTCPRE). - * @retval Returned value can be one of the following values: - * @arg @ref RCC_RTCCLKSOURCE_HSE_DIVX: HSE clock divided by x selected - * as RTC clock, where x:[2,31] - */ -#define __HAL_RCC_GET_RTC_HSE_PRESCALER() (READ_BIT(RCC->CFGR, RCC_CFGR_RTCPRE) | RCC_BDCR_RTCSEL) - -/** @brief Macros to force or release the Backup domain reset. - * @note This function resets the RTC peripheral (including the backup registers) - * and the RTC clock source selection in RCC_CSR register. - * @note The BKPSRAM is not affected by this reset. - */ -#define __HAL_RCC_BACKUPRESET_FORCE() (RCC->BDCR |= (RCC_BDCR_BDRST)) -#define __HAL_RCC_BACKUPRESET_RELEASE() (RCC->BDCR &= ~(RCC_BDCR_BDRST)) -/** - * @} - */ - -/** @defgroup RCC_PLL_Configuration PLL Configuration - * @{ - */ - -/** @brief Macros to enable or disable the main PLL. - * @note After enabling the main PLL, the application software should wait on - * PLLRDY flag to be set indicating that PLL clock is stable and can - * be used as system clock source. - * @note The main PLL can not be disabled if it is used as system clock source - * @note The main PLL is disabled by hardware when entering STOP and STANDBY modes. - */ -#define __HAL_RCC_PLL_ENABLE() SET_BIT(RCC->CR, RCC_CR_PLLON) -#define __HAL_RCC_PLL_DISABLE() CLEAR_BIT(RCC->CR, RCC_CR_PLLON) - -/** @brief Macro to configure the PLL clock source. - * @note This function must be used only when the main PLL is disabled. - * @param __PLLSOURCE__ specifies the PLL entry clock source. - * This parameter can be one of the following values: - * @arg RCC_PLLSOURCE_HSI: HSI oscillator clock selected as PLL clock entry - * @arg RCC_PLLSOURCE_HSE: HSE oscillator clock selected as PLL clock entry - * - */ -#define __HAL_RCC_PLL_PLLSOURCE_CONFIG(__PLLSOURCE__) MODIFY_REG(RCC->PLLCFGR, RCC_PLLCFGR_PLLSRC, (__PLLSOURCE__)) - -/** @brief Macro to configure the PLL multiplication factor. - * @note This function must be used only when the main PLL is disabled. - * @param __PLLM__ specifies the division factor for PLL VCO input clock - * This parameter must be a number between Min_Data = 2 and Max_Data = 63. - * @note You have to set the PLLM parameter correctly to ensure that the VCO input - * frequency ranges from 1 to 2 MHz. It is recommended to select a frequency - * of 2 MHz to limit PLL jitter. - * - */ -#define __HAL_RCC_PLL_PLLM_CONFIG(__PLLM__) MODIFY_REG(RCC->PLLCFGR, RCC_PLLCFGR_PLLM, (__PLLM__)) -/** - * @} - */ - -/** @defgroup RCC_PLL_I2S_Configuration PLL I2S Configuration - * @{ - */ - -/** @brief Macro to configure the I2S clock source (I2SCLK). - * @note This function must be called before enabling the I2S APB clock. - * @param __SOURCE__ specifies the I2S clock source. - * This parameter can be one of the following values: - * @arg RCC_I2SCLKSOURCE_PLLI2S: PLLI2S clock used as I2S clock source. - * @arg RCC_I2SCLKSOURCE_EXT: External clock mapped on the I2S_CKIN pin - * used as I2S clock source. - */ -#define __HAL_RCC_I2S_CONFIG(__SOURCE__) do {RCC->CFGR &= ~(RCC_CFGR_I2SSRC); \ - RCC->CFGR |= (__SOURCE__); \ - }while(0) - -/** @brief Macros to enable or disable the PLLI2S. - * @note The PLLI2S is disabled by hardware when entering STOP and STANDBY modes. - */ -#define __HAL_RCC_PLLI2S_ENABLE() (RCC->CR |= (RCC_CR_PLLI2SON)) -#define __HAL_RCC_PLLI2S_DISABLE() (RCC->CR &= ~(RCC_CR_PLLI2SON)) -/** - * @} - */ - -/** @defgroup RCC_Get_Clock_source Get Clock source - * @{ - */ -/** - * @brief Macro to configure the system clock source. - * @param __RCC_SYSCLKSOURCE__ specifies the system clock source. - * This parameter can be one of the following values: - * - RCC_SYSCLKSOURCE_HSI: HSI oscillator is used as system clock source. - * - RCC_SYSCLKSOURCE_HSE: HSE oscillator is used as system clock source. - * - RCC_SYSCLKSOURCE_PLLCLK: PLL output is used as system clock source. - */ -#define __HAL_RCC_SYSCLK_CONFIG(__RCC_SYSCLKSOURCE__) MODIFY_REG(RCC->CFGR, RCC_CFGR_SW, (__RCC_SYSCLKSOURCE__)) - -/** @brief Macro to get the clock source used as system clock. - * @retval The clock source used as system clock. The returned value can be one - * of the following: - * - RCC_SYSCLKSOURCE_STATUS_HSI: HSI used as system clock. - * - RCC_SYSCLKSOURCE_STATUS_HSE: HSE used as system clock. - * - RCC_SYSCLKSOURCE_STATUS_PLLCLK: PLL used as system clock. - */ -#define __HAL_RCC_GET_SYSCLK_SOURCE() (RCC->CFGR & RCC_CFGR_SWS) - -/** - * @brief Macro to configures the External Low Speed oscillator (LSE) drive capability. - * @note As the LSE is in the Backup domain and write access is denied to - * this domain after reset, you have to enable write access using - * HAL_PWR_EnableBkUpAccess() function before to configure the LSE - * (to be done once after reset). - * @param __RCC_LSEDRIVE__ specifies the new state of the LSE drive capability. - * This parameter can be one of the following values: - * @arg RCC_LSEDRIVE_LOW: LSE oscillator low drive capability. - * @arg RCC_LSEDRIVE_MEDIUMLOW: LSE oscillator medium low drive capability. - * @arg RCC_LSEDRIVE_MEDIUMHIGH: LSE oscillator medium high drive capability. - * @arg RCC_LSEDRIVE_HIGH: LSE oscillator high drive capability. - * @retval None - */ -#define __HAL_RCC_LSEDRIVE_CONFIG(__RCC_LSEDRIVE__) \ - (MODIFY_REG(RCC->BDCR, RCC_BDCR_LSEDRV, (uint32_t)(__RCC_LSEDRIVE__) )) - -/** @brief Macro to get the oscillator used as PLL clock source. - * @retval The oscillator used as PLL clock source. The returned value can be one - * of the following: - * - RCC_PLLSOURCE_HSI: HSI oscillator is used as PLL clock source. - * - RCC_PLLSOURCE_HSE: HSE oscillator is used as PLL clock source. - */ -#define __HAL_RCC_GET_PLL_OSCSOURCE() ((uint32_t)(RCC->PLLCFGR & RCC_PLLCFGR_PLLSRC)) -/** - * @} - */ - -/** @defgroup RCCEx_MCOx_Clock_Config RCC Extended MCOx Clock Config - * @{ - */ - -/** @brief Macro to configure the MCO1 clock. - * @param __MCOCLKSOURCE__ specifies the MCO clock source. - * This parameter can be one of the following values: - * @arg RCC_MCO1SOURCE_HSI: HSI clock selected as MCO1 source - * @arg RCC_MCO1SOURCE_LSE: LSE clock selected as MCO1 source - * @arg RCC_MCO1SOURCE_HSE: HSE clock selected as MCO1 source - * @arg RCC_MCO1SOURCE_PLLCLK: main PLL clock selected as MCO1 source - * @param __MCODIV__ specifies the MCO clock prescaler. - * This parameter can be one of the following values: - * @arg RCC_MCODIV_1: no division applied to MCOx clock - * @arg RCC_MCODIV_2: division by 2 applied to MCOx clock - * @arg RCC_MCODIV_3: division by 3 applied to MCOx clock - * @arg RCC_MCODIV_4: division by 4 applied to MCOx clock - * @arg RCC_MCODIV_5: division by 5 applied to MCOx clock - */ - -#define __HAL_RCC_MCO1_CONFIG(__MCOCLKSOURCE__, __MCODIV__) \ - MODIFY_REG(RCC->CFGR, (RCC_CFGR_MCO1 | RCC_CFGR_MCO1PRE), ((__MCOCLKSOURCE__) | (__MCODIV__))) - -/** @brief Macro to configure the MCO2 clock. - * @param __MCOCLKSOURCE__ specifies the MCO clock source. - * This parameter can be one of the following values: - * @arg RCC_MCO2SOURCE_SYSCLK: System clock (SYSCLK) selected as MCO2 source - * @arg RCC_MCO2SOURCE_PLLI2SCLK: PLLI2S clock selected as MCO2 source - * @arg RCC_MCO2SOURCE_HSE: HSE clock selected as MCO2 source - * @arg RCC_MCO2SOURCE_PLLCLK: main PLL clock selected as MCO2 source - * @param __MCODIV__ specifies the MCO clock prescaler. - * This parameter can be one of the following values: - * @arg RCC_MCODIV_1: no division applied to MCOx clock - * @arg RCC_MCODIV_2: division by 2 applied to MCOx clock - * @arg RCC_MCODIV_3: division by 3 applied to MCOx clock - * @arg RCC_MCODIV_4: division by 4 applied to MCOx clock - * @arg RCC_MCODIV_5: division by 5 applied to MCOx clock - */ - -#define __HAL_RCC_MCO2_CONFIG(__MCOCLKSOURCE__, __MCODIV__) \ - MODIFY_REG(RCC->CFGR, (RCC_CFGR_MCO2 | RCC_CFGR_MCO2PRE), ((__MCOCLKSOURCE__) | ((__MCODIV__) << 3))); -/** - * @} - */ - -/** @defgroup RCC_Flags_Interrupts_Management Flags Interrupts Management - * @brief macros to manage the specified RCC Flags and interrupts. - * @{ - */ - -/** @brief Enable RCC interrupt (Perform Byte access to RCC_CIR[14:8] bits to enable - * the selected interrupts). - * @param __INTERRUPT__ specifies the RCC interrupt sources to be enabled. - * This parameter can be any combination of the following values: - * @arg RCC_IT_LSIRDY: LSI ready interrupt. - * @arg RCC_IT_LSERDY: LSE ready interrupt. - * @arg RCC_IT_HSIRDY: HSI ready interrupt. - * @arg RCC_IT_HSERDY: HSE ready interrupt. - * @arg RCC_IT_PLLRDY: Main PLL ready interrupt. - * @arg RCC_IT_PLLI2SRDY: PLLI2S ready interrupt. - */ -#define __HAL_RCC_ENABLE_IT(__INTERRUPT__) (*(__IO uint8_t *) RCC_CIR_BYTE1_ADDRESS |= (__INTERRUPT__)) - -/** @brief Disable RCC interrupt (Perform Byte access to RCC_CIR[14:8] bits to disable - * the selected interrupts). - * @param __INTERRUPT__ specifies the RCC interrupt sources to be disabled. - * This parameter can be any combination of the following values: - * @arg RCC_IT_LSIRDY: LSI ready interrupt. - * @arg RCC_IT_LSERDY: LSE ready interrupt. - * @arg RCC_IT_HSIRDY: HSI ready interrupt. - * @arg RCC_IT_HSERDY: HSE ready interrupt. - * @arg RCC_IT_PLLRDY: Main PLL ready interrupt. - * @arg RCC_IT_PLLI2SRDY: PLLI2S ready interrupt. - */ -#define __HAL_RCC_DISABLE_IT(__INTERRUPT__) (*(__IO uint8_t *) RCC_CIR_BYTE1_ADDRESS &= (uint8_t)(~(__INTERRUPT__))) - -/** @brief Clear the RCC's interrupt pending bits (Perform Byte access to RCC_CIR[23:16] - * bits to clear the selected interrupt pending bits. - * @param __INTERRUPT__ specifies the interrupt pending bit to clear. - * This parameter can be any combination of the following values: - * @arg RCC_IT_LSIRDY: LSI ready interrupt. - * @arg RCC_IT_LSERDY: LSE ready interrupt. - * @arg RCC_IT_HSIRDY: HSI ready interrupt. - * @arg RCC_IT_HSERDY: HSE ready interrupt. - * @arg RCC_IT_PLLRDY: Main PLL ready interrupt. - * @arg RCC_IT_PLLI2SRDY: PLLI2S ready interrupt. - * @arg RCC_IT_CSS: Clock Security System interrupt - */ -#define __HAL_RCC_CLEAR_IT(__INTERRUPT__) (*(__IO uint8_t *) RCC_CIR_BYTE2_ADDRESS = (__INTERRUPT__)) - -/** @brief Check the RCC's interrupt has occurred or not. - * @param __INTERRUPT__ specifies the RCC interrupt source to check. - * This parameter can be one of the following values: - * @arg RCC_IT_LSIRDY: LSI ready interrupt. - * @arg RCC_IT_LSERDY: LSE ready interrupt. - * @arg RCC_IT_HSIRDY: HSI ready interrupt. - * @arg RCC_IT_HSERDY: HSE ready interrupt. - * @arg RCC_IT_PLLRDY: Main PLL ready interrupt. - * @arg RCC_IT_PLLI2SRDY: PLLI2S ready interrupt. - * @arg RCC_IT_CSS: Clock Security System interrupt - * @retval The new state of __INTERRUPT__ (TRUE or FALSE). - */ -#define __HAL_RCC_GET_IT(__INTERRUPT__) ((RCC->CIR & (__INTERRUPT__)) == (__INTERRUPT__)) - -/** @brief Set RMVF bit to clear the reset flags: RCC_FLAG_PINRST, RCC_FLAG_PORRST, - * RCC_FLAG_SFTRST, RCC_FLAG_IWDGRST, RCC_FLAG_WWDGRST and RCC_FLAG_LPWRRST. - */ -#define __HAL_RCC_CLEAR_RESET_FLAGS() (RCC->CSR |= RCC_CSR_RMVF) - -/** @brief Check RCC flag is set or not. - * @param __FLAG__ specifies the flag to check. - * This parameter can be one of the following values: - * @arg RCC_FLAG_HSIRDY: HSI oscillator clock ready. - * @arg RCC_FLAG_HSERDY: HSE oscillator clock ready. - * @arg RCC_FLAG_PLLRDY: Main PLL clock ready. - * @arg RCC_FLAG_PLLI2SRDY: PLLI2S clock ready. - * @arg RCC_FLAG_LSERDY: LSE oscillator clock ready. - * @arg RCC_FLAG_LSIRDY: LSI oscillator clock ready. - * @arg RCC_FLAG_BORRST: POR/PDR or BOR reset. - * @arg RCC_FLAG_PINRST: Pin reset. - * @arg RCC_FLAG_PORRST: POR/PDR reset. - * @arg RCC_FLAG_SFTRST: Software reset. - * @arg RCC_FLAG_IWDGRST: Independent Watchdog reset. - * @arg RCC_FLAG_WWDGRST: Window Watchdog reset. - * @arg RCC_FLAG_LPWRRST: Low Power reset. - * @retval The new state of __FLAG__ (TRUE or FALSE). - */ -#define RCC_FLAG_MASK ((uint8_t)0x1F) -#define __HAL_RCC_GET_FLAG(__FLAG__) (((((((__FLAG__) >> 5) == 1)? RCC->CR :((((__FLAG__) >> 5) == 2) ? RCC->BDCR :((((__FLAG__) >> 5) == 3)? RCC->CSR :RCC->CIR))) & ((uint32_t)1 << ((__FLAG__) & RCC_FLAG_MASK)))!= 0)? 1 : 0) - -/** - * @} - */ - -/** - * @} - */ - -/* Include RCC HAL Extension module */ -#include "stm32f7xx_hal_rcc_ex.h" - -/* Exported functions --------------------------------------------------------*/ - /** @addtogroup RCC_Exported_Functions - * @{ - */ - -/** @addtogroup RCC_Exported_Functions_Group1 - * @{ - */ -/* Initialization and de-initialization functions ******************************/ -HAL_StatusTypeDef HAL_RCC_DeInit(void); -HAL_StatusTypeDef HAL_RCC_OscConfig(RCC_OscInitTypeDef *RCC_OscInitStruct); -HAL_StatusTypeDef HAL_RCC_ClockConfig(RCC_ClkInitTypeDef *RCC_ClkInitStruct, uint32_t FLatency); -/** - * @} - */ - -/** @addtogroup RCC_Exported_Functions_Group2 - * @{ - */ -/* Peripheral Control functions ************************************************/ -void HAL_RCC_MCOConfig(uint32_t RCC_MCOx, uint32_t RCC_MCOSource, uint32_t RCC_MCODiv); -void HAL_RCC_EnableCSS(void); -void HAL_RCC_DisableCSS(void); -uint32_t HAL_RCC_GetSysClockFreq(void); -uint32_t HAL_RCC_GetHCLKFreq(void); -uint32_t HAL_RCC_GetPCLK1Freq(void); -uint32_t HAL_RCC_GetPCLK2Freq(void); -void HAL_RCC_GetOscConfig(RCC_OscInitTypeDef *RCC_OscInitStruct); -void HAL_RCC_GetClockConfig(RCC_ClkInitTypeDef *RCC_ClkInitStruct, uint32_t *pFLatency); - -/* CSS NMI IRQ handler */ -void HAL_RCC_NMI_IRQHandler(void); - -/* User Callbacks in non blocking mode (IT mode) */ -void HAL_RCC_CSSCallback(void); -/** - * @} - */ - -/** - * @} - */ - -/* Private types -------------------------------------------------------------*/ -/* Private variables ---------------------------------------------------------*/ -/* Private constants ---------------------------------------------------------*/ -/** @defgroup RCC_Private_Constants RCC Private Constants - * @{ - */ -#define HSE_TIMEOUT_VALUE HSE_STARTUP_TIMEOUT -#define HSI_TIMEOUT_VALUE ((uint32_t)2) /* 2 ms */ -#define LSI_TIMEOUT_VALUE ((uint32_t)2) /* 2 ms */ -#define PLL_TIMEOUT_VALUE ((uint32_t)2) /* 2 ms */ -#define CLOCKSWITCH_TIMEOUT_VALUE ((uint32_t)5000) /* 5 s */ -#define PLLI2S_TIMEOUT_VALUE 100U /* Timeout value fixed to 100 ms */ -#define PLLSAI_TIMEOUT_VALUE 100U /* Timeout value fixed to 100 ms */ - -/** @defgroup RCC_BitAddress_Alias RCC BitAddress Alias - * @brief RCC registers bit address alias - * @{ - */ -/* CIR register byte 2 (Bits[15:8]) base address */ -#define RCC_CIR_BYTE1_ADDRESS ((uint32_t)(RCC_BASE + 0x0C + 0x01)) - -/* CIR register byte 3 (Bits[23:16]) base address */ -#define RCC_CIR_BYTE2_ADDRESS ((uint32_t)(RCC_BASE + 0x0C + 0x02)) - -#define RCC_DBP_TIMEOUT_VALUE ((uint32_t)100) -#define RCC_LSE_TIMEOUT_VALUE LSE_STARTUP_TIMEOUT -/** - * @} - */ -/** - * @} - */ - -/* Private macros ------------------------------------------------------------*/ -/** @addtogroup RCC_Private_Macros RCC Private Macros - * @{ - */ - -/** @defgroup RCC_IS_RCC_Definitions RCC Private macros to check input parameters - * @{ - */ -#define IS_RCC_OSCILLATORTYPE(OSCILLATOR) ((OSCILLATOR) <= 15) - -#define IS_RCC_HSE(HSE) (((HSE) == RCC_HSE_OFF) || ((HSE) == RCC_HSE_ON) || \ - ((HSE) == RCC_HSE_BYPASS)) - -#define IS_RCC_LSE(LSE) (((LSE) == RCC_LSE_OFF) || ((LSE) == RCC_LSE_ON) || \ - ((LSE) == RCC_LSE_BYPASS)) - -#define IS_RCC_HSI(HSI) (((HSI) == RCC_HSI_OFF) || ((HSI) == RCC_HSI_ON)) - -#define IS_RCC_LSI(LSI) (((LSI) == RCC_LSI_OFF) || ((LSI) == RCC_LSI_ON)) - -#define IS_RCC_PLL(PLL) (((PLL) == RCC_PLL_NONE) ||((PLL) == RCC_PLL_OFF) || ((PLL) == RCC_PLL_ON)) - -#define IS_RCC_PLLSOURCE(SOURCE) (((SOURCE) == RCC_PLLSOURCE_HSI) || \ - ((SOURCE) == RCC_PLLSOURCE_HSE)) - -#define IS_RCC_SYSCLKSOURCE(SOURCE) (((SOURCE) == RCC_SYSCLKSOURCE_HSI) || \ - ((SOURCE) == RCC_SYSCLKSOURCE_HSE) || \ - ((SOURCE) == RCC_SYSCLKSOURCE_PLLCLK)) -#define IS_RCC_PLLM_VALUE(VALUE) ((2 <= (VALUE)) && ((VALUE) <= 63)) - -#define IS_RCC_PLLN_VALUE(VALUE) ((50 <= (VALUE)) && ((VALUE) <= 432)) - -#define IS_RCC_PLLP_VALUE(VALUE) (((VALUE) == RCC_PLLP_DIV2) || ((VALUE) == RCC_PLLP_DIV4) || \ - ((VALUE) == RCC_PLLP_DIV6) || ((VALUE) == RCC_PLLP_DIV8)) -#define IS_RCC_PLLQ_VALUE(VALUE) ((2 <= (VALUE)) && ((VALUE) <= 15)) - -#define IS_RCC_HCLK(HCLK) (((HCLK) == RCC_SYSCLK_DIV1) || ((HCLK) == RCC_SYSCLK_DIV2) || \ - ((HCLK) == RCC_SYSCLK_DIV4) || ((HCLK) == RCC_SYSCLK_DIV8) || \ - ((HCLK) == RCC_SYSCLK_DIV16) || ((HCLK) == RCC_SYSCLK_DIV64) || \ - ((HCLK) == RCC_SYSCLK_DIV128) || ((HCLK) == RCC_SYSCLK_DIV256) || \ - ((HCLK) == RCC_SYSCLK_DIV512)) - -#define IS_RCC_CLOCKTYPE(CLK) ((1 <= (CLK)) && ((CLK) <= 15)) - -#define IS_RCC_PCLK(PCLK) (((PCLK) == RCC_HCLK_DIV1) || ((PCLK) == RCC_HCLK_DIV2) || \ - ((PCLK) == RCC_HCLK_DIV4) || ((PCLK) == RCC_HCLK_DIV8) || \ - ((PCLK) == RCC_HCLK_DIV16)) - -#define IS_RCC_MCO(MCOX) (((MCOX) == RCC_MCO1) || ((MCOX) == RCC_MCO2)) - - -#define IS_RCC_MCO1SOURCE(SOURCE) (((SOURCE) == RCC_MCO1SOURCE_HSI) || ((SOURCE) == RCC_MCO1SOURCE_LSE) || \ - ((SOURCE) == RCC_MCO1SOURCE_HSE) || ((SOURCE) == RCC_MCO1SOURCE_PLLCLK)) - -#define IS_RCC_MCO2SOURCE(SOURCE) (((SOURCE) == RCC_MCO2SOURCE_SYSCLK) || ((SOURCE) == RCC_MCO2SOURCE_PLLI2SCLK)|| \ - ((SOURCE) == RCC_MCO2SOURCE_HSE) || ((SOURCE) == RCC_MCO2SOURCE_PLLCLK)) - -#define IS_RCC_MCODIV(DIV) (((DIV) == RCC_MCODIV_1) || ((DIV) == RCC_MCODIV_2) || \ - ((DIV) == RCC_MCODIV_3) || ((DIV) == RCC_MCODIV_4) || \ - ((DIV) == RCC_MCODIV_5)) -#define IS_RCC_CALIBRATION_VALUE(VALUE) ((VALUE) <= 0x1F) - -#define IS_RCC_RTCCLKSOURCE(SOURCE) (((SOURCE) == RCC_RTCCLKSOURCE_LSE) || ((SOURCE) == RCC_RTCCLKSOURCE_LSI) || \ - ((SOURCE) == RCC_RTCCLKSOURCE_HSE_DIV2) || ((SOURCE) == RCC_RTCCLKSOURCE_HSE_DIV3) || \ - ((SOURCE) == RCC_RTCCLKSOURCE_HSE_DIV4) || ((SOURCE) == RCC_RTCCLKSOURCE_HSE_DIV5) || \ - ((SOURCE) == RCC_RTCCLKSOURCE_HSE_DIV6) || ((SOURCE) == RCC_RTCCLKSOURCE_HSE_DIV7) || \ - ((SOURCE) == RCC_RTCCLKSOURCE_HSE_DIV8) || ((SOURCE) == RCC_RTCCLKSOURCE_HSE_DIV9) || \ - ((SOURCE) == RCC_RTCCLKSOURCE_HSE_DIV10) || ((SOURCE) == RCC_RTCCLKSOURCE_HSE_DIV11) || \ - ((SOURCE) == RCC_RTCCLKSOURCE_HSE_DIV12) || ((SOURCE) == RCC_RTCCLKSOURCE_HSE_DIV13) || \ - ((SOURCE) == RCC_RTCCLKSOURCE_HSE_DIV14) || ((SOURCE) == RCC_RTCCLKSOURCE_HSE_DIV15) || \ - ((SOURCE) == RCC_RTCCLKSOURCE_HSE_DIV16) || ((SOURCE) == RCC_RTCCLKSOURCE_HSE_DIV17) || \ - ((SOURCE) == RCC_RTCCLKSOURCE_HSE_DIV18) || ((SOURCE) == RCC_RTCCLKSOURCE_HSE_DIV19) || \ - ((SOURCE) == RCC_RTCCLKSOURCE_HSE_DIV20) || ((SOURCE) == RCC_RTCCLKSOURCE_HSE_DIV21) || \ - ((SOURCE) == RCC_RTCCLKSOURCE_HSE_DIV22) || ((SOURCE) == RCC_RTCCLKSOURCE_HSE_DIV23) || \ - ((SOURCE) == RCC_RTCCLKSOURCE_HSE_DIV24) || ((SOURCE) == RCC_RTCCLKSOURCE_HSE_DIV25) || \ - ((SOURCE) == RCC_RTCCLKSOURCE_HSE_DIV26) || ((SOURCE) == RCC_RTCCLKSOURCE_HSE_DIV27) || \ - ((SOURCE) == RCC_RTCCLKSOURCE_HSE_DIV28) || ((SOURCE) == RCC_RTCCLKSOURCE_HSE_DIV29) || \ - ((SOURCE) == RCC_RTCCLKSOURCE_HSE_DIV30) || ((SOURCE) == RCC_RTCCLKSOURCE_HSE_DIV31)) - - -#define IS_RCC_LSE_DRIVE(DRIVE) (((DRIVE) == RCC_LSEDRIVE_LOW) || \ - ((DRIVE) == RCC_LSEDRIVE_MEDIUMLOW) || \ - ((DRIVE) == RCC_LSEDRIVE_MEDIUMHIGH) || \ - ((DRIVE) == RCC_LSEDRIVE_HIGH)) -/** - * @} - */ - -/** - * @} - */ - -/** - * @} - */ - -/** - * @} - */ - -#ifdef __cplusplus -} -#endif - -#endif /* __STM32F7xx_HAL_RCC_H */ - -/************************ (C) COPYRIGHT STMicroelectronics *****END OF FILE****/ diff --git a/test_dma/Drivers/STM32F7xx_HAL_Driver/Inc/stm32f7xx_hal_rcc_ex.h b/test_dma/Drivers/STM32F7xx_HAL_Driver/Inc/stm32f7xx_hal_rcc_ex.h deleted file mode 100644 index f92f9d6..0000000 --- a/test_dma/Drivers/STM32F7xx_HAL_Driver/Inc/stm32f7xx_hal_rcc_ex.h +++ /dev/null @@ -1,3524 +0,0 @@ -/** - ****************************************************************************** - * @file stm32f7xx_hal_rcc_ex.h - * @author MCD Application Team - * @brief Header file of RCC HAL Extension module. - ****************************************************************************** - * @attention - * - *

© Copyright (c) 2017 STMicroelectronics. - * All rights reserved.

- * - * This software component is licensed by ST under BSD 3-Clause license, - * the "License"; You may not use this file except in compliance with the - * License. You may obtain a copy of the License at: - * opensource.org/licenses/BSD-3-Clause - * - ****************************************************************************** - */ - -/* Define to prevent recursive inclusion -------------------------------------*/ -#ifndef __STM32F7xx_HAL_RCC_EX_H -#define __STM32F7xx_HAL_RCC_EX_H - -#ifdef __cplusplus - extern "C" { -#endif - -/* Includes ------------------------------------------------------------------*/ -#include "stm32f7xx_hal_def.h" - -/** @addtogroup STM32F7xx_HAL_Driver - * @{ - */ - -/** @addtogroup RCCEx - * @{ - */ - -/* Exported types ------------------------------------------------------------*/ -/** @defgroup RCCEx_Exported_Types RCCEx Exported Types - * @{ - */ - -/** - * @brief RCC PLL configuration structure definition - */ -typedef struct -{ - uint32_t PLLState; /*!< The new state of the PLL. - This parameter can be a value of @ref RCC_PLL_Config */ - - uint32_t PLLSource; /*!< RCC_PLLSource: PLL entry clock source. - This parameter must be a value of @ref RCC_PLL_Clock_Source */ - - uint32_t PLLM; /*!< PLLM: Division factor for PLL VCO input clock. - This parameter must be a number between Min_Data = 2 and Max_Data = 63 */ - - uint32_t PLLN; /*!< PLLN: Multiplication factor for PLL VCO output clock. - This parameter must be a number between Min_Data = 50 and Max_Data = 432 */ - - uint32_t PLLP; /*!< PLLP: Division factor for main system clock (SYSCLK). - This parameter must be a value of @ref RCC_PLLP_Clock_Divider */ - - uint32_t PLLQ; /*!< PLLQ: Division factor for OTG FS, SDMMC and RNG clocks. - This parameter must be a number between Min_Data = 2 and Max_Data = 15 */ -#if defined (STM32F765xx) || defined (STM32F767xx) || defined (STM32F769xx) || defined (STM32F777xx) || defined (STM32F779xx) - uint32_t PLLR; /*!< PLLR: Division factor for DSI clock. - This parameter must be a number between Min_Data = 2 and Max_Data = 7 */ -#endif /* STM32F767xx || STM32F769xx || STM32F777xx || STM32F779xx */ - -}RCC_PLLInitTypeDef; - -/** - * @brief PLLI2S Clock structure definition - */ -typedef struct -{ - uint32_t PLLI2SN; /*!< Specifies the multiplication factor for PLLI2S VCO output clock. - This parameter must be a number between Min_Data = 50 and Max_Data = 432. - This parameter will be used only when PLLI2S is selected as Clock Source I2S or SAI */ - - uint32_t PLLI2SR; /*!< Specifies the division factor for I2S clock. - This parameter must be a number between Min_Data = 2 and Max_Data = 7. - This parameter will be used only when PLLI2S is selected as Clock Source I2S or SAI */ - - uint32_t PLLI2SQ; /*!< Specifies the division factor for SAI1 clock. - This parameter must be a number between Min_Data = 2 and Max_Data = 15. - This parameter will be used only when PLLI2S is selected as Clock Source SAI */ - -#if defined (STM32F745xx) || defined (STM32F746xx) || defined (STM32F756xx) || defined (STM32F765xx) || defined (STM32F767xx) || \ - defined (STM32F769xx) || defined (STM32F777xx) || defined (STM32F779xx) || defined (STM32F750xx) - uint32_t PLLI2SP; /*!< Specifies the division factor for SPDIF-RX clock. - This parameter must be a value of @ref RCCEx_PLLI2SP_Clock_Divider. - This parameter will be used only when PLLI2S is selected as Clock Source SPDIF-RX */ -#endif /* STM32F745xx || STM32F746xx || STM32F756xx || STM32F765xx || STM32F767xx || STM32F769xx || STM32F777xx || STM32F779xx || STM32F750xx */ -}RCC_PLLI2SInitTypeDef; - -/** - * @brief PLLSAI Clock structure definition - */ -typedef struct -{ - uint32_t PLLSAIN; /*!< Specifies the multiplication factor for PLLI2S VCO output clock. - This parameter must be a number between Min_Data = 50 and Max_Data = 432. - This parameter will be used only when PLLSAI is selected as Clock Source SAI or LTDC */ - - uint32_t PLLSAIQ; /*!< Specifies the division factor for SAI1 clock. - This parameter must be a number between Min_Data = 2 and Max_Data = 15. - This parameter will be used only when PLLSAI is selected as Clock Source SAI or LTDC */ - -#if defined (STM32F745xx) || defined (STM32F746xx) || defined (STM32F756xx) || defined (STM32F765xx) || defined (STM32F767xx) || \ - defined (STM32F769xx) || defined (STM32F777xx) || defined (STM32F779xx) || defined (STM32F750xx) - uint32_t PLLSAIR; /*!< specifies the division factor for LTDC clock - This parameter must be a number between Min_Data = 2 and Max_Data = 7. - This parameter will be used only when PLLSAI is selected as Clock Source LTDC */ -#endif /* STM32F745xx || STM32F746xx || STM32F756xx || STM32F765xx || STM32F767xx || STM32F769xx || STM32F777xx || STM32F779xx || STM32F750xx */ - - uint32_t PLLSAIP; /*!< Specifies the division factor for 48MHz clock. - This parameter must be a value of @ref RCCEx_PLLSAIP_Clock_Divider - This parameter will be used only when PLLSAI is disabled */ -}RCC_PLLSAIInitTypeDef; - -/** - * @brief RCC extended clocks structure definition - */ -typedef struct -{ - uint32_t PeriphClockSelection; /*!< The Extended Clock to be configured. - This parameter can be a value of @ref RCCEx_Periph_Clock_Selection */ - - RCC_PLLI2SInitTypeDef PLLI2S; /*!< PLL I2S structure parameters. - This parameter will be used only when PLLI2S is selected as Clock Source I2S or SAI */ - - RCC_PLLSAIInitTypeDef PLLSAI; /*!< PLL SAI structure parameters. - This parameter will be used only when PLLI2S is selected as Clock Source SAI or LTDC */ - - uint32_t PLLI2SDivQ; /*!< Specifies the PLLI2S division factor for SAI1 clock. - This parameter must be a number between Min_Data = 1 and Max_Data = 32 - This parameter will be used only when PLLI2S is selected as Clock Source SAI */ - - uint32_t PLLSAIDivQ; /*!< Specifies the PLLI2S division factor for SAI1 clock. - This parameter must be a number between Min_Data = 1 and Max_Data = 32 - This parameter will be used only when PLLSAI is selected as Clock Source SAI */ - - uint32_t PLLSAIDivR; /*!< Specifies the PLLSAI division factor for LTDC clock. - This parameter must be one value of @ref RCCEx_PLLSAI_DIVR */ - - uint32_t RTCClockSelection; /*!< Specifies RTC Clock source Selection. - This parameter can be a value of @ref RCC_RTC_Clock_Source */ - - uint32_t I2sClockSelection; /*!< Specifies I2S Clock source Selection. - This parameter can be a value of @ref RCCEx_I2S_Clock_Source */ - - uint32_t TIMPresSelection; /*!< Specifies TIM Clock Prescalers Selection. - This parameter can be a value of @ref RCCEx_TIM_Prescaler_Selection */ - - uint32_t Sai1ClockSelection; /*!< Specifies SAI1 Clock Prescalers Selection - This parameter can be a value of @ref RCCEx_SAI1_Clock_Source */ - - uint32_t Sai2ClockSelection; /*!< Specifies SAI2 Clock Prescalers Selection - This parameter can be a value of @ref RCCEx_SAI2_Clock_Source */ - - uint32_t Usart1ClockSelection; /*!< USART1 clock source - This parameter can be a value of @ref RCCEx_USART1_Clock_Source */ - - uint32_t Usart2ClockSelection; /*!< USART2 clock source - This parameter can be a value of @ref RCCEx_USART2_Clock_Source */ - - uint32_t Usart3ClockSelection; /*!< USART3 clock source - This parameter can be a value of @ref RCCEx_USART3_Clock_Source */ - - uint32_t Uart4ClockSelection; /*!< UART4 clock source - This parameter can be a value of @ref RCCEx_UART4_Clock_Source */ - - uint32_t Uart5ClockSelection; /*!< UART5 clock source - This parameter can be a value of @ref RCCEx_UART5_Clock_Source */ - - uint32_t Usart6ClockSelection; /*!< USART6 clock source - This parameter can be a value of @ref RCCEx_USART6_Clock_Source */ - - uint32_t Uart7ClockSelection; /*!< UART7 clock source - This parameter can be a value of @ref RCCEx_UART7_Clock_Source */ - - uint32_t Uart8ClockSelection; /*!< UART8 clock source - This parameter can be a value of @ref RCCEx_UART8_Clock_Source */ - - uint32_t I2c1ClockSelection; /*!< I2C1 clock source - This parameter can be a value of @ref RCCEx_I2C1_Clock_Source */ - - uint32_t I2c2ClockSelection; /*!< I2C2 clock source - This parameter can be a value of @ref RCCEx_I2C2_Clock_Source */ - - uint32_t I2c3ClockSelection; /*!< I2C3 clock source - This parameter can be a value of @ref RCCEx_I2C3_Clock_Source */ - - uint32_t I2c4ClockSelection; /*!< I2C4 clock source - This parameter can be a value of @ref RCCEx_I2C4_Clock_Source */ - - uint32_t Lptim1ClockSelection; /*!< Specifies LPTIM1 clock source - This parameter can be a value of @ref RCCEx_LPTIM1_Clock_Source */ - - uint32_t CecClockSelection; /*!< CEC clock source - This parameter can be a value of @ref RCCEx_CEC_Clock_Source */ - - uint32_t Clk48ClockSelection; /*!< Specifies 48Mhz clock source used by USB OTG FS, RNG and SDMMC - This parameter can be a value of @ref RCCEx_CLK48_Clock_Source */ - - uint32_t Sdmmc1ClockSelection; /*!< SDMMC1 clock source - This parameter can be a value of @ref RCCEx_SDMMC1_Clock_Source */ - -#if defined (STM32F722xx) || defined (STM32F723xx) || defined (STM32F732xx) || defined (STM32F733xx) || defined (STM32F765xx) ||\ - defined (STM32F767xx) || defined (STM32F769xx) || defined (STM32F777xx) || defined (STM32F779xx) || defined (STM32F730xx) - uint32_t Sdmmc2ClockSelection; /*!< SDMMC2 clock source - This parameter can be a value of @ref RCCEx_SDMMC2_Clock_Source */ -#endif /* STM32F722xx || STM32F723xx || STM32F732xx || STM32F733xx || STM32F765xx || STM32F767xx || STM32F769xx || STM32F777xx || STM32F779xx || STM32F730xx */ - -#if defined (STM32F765xx) || defined (STM32F767xx) || defined (STM32F769xx) || defined (STM32F777xx) || defined (STM32F779xx) - uint32_t Dfsdm1ClockSelection; /*!< DFSDM1 clock source - This parameter can be a value of @ref RCCEx_DFSDM1_Kernel_Clock_Source */ - - uint32_t Dfsdm1AudioClockSelection; /*!< DFSDM1 clock source - This parameter can be a value of @ref RCCEx_DFSDM1_AUDIO_Clock_Source */ -#endif /* STM32F767xx || STM32F769xx || STM32F777xx || STM32F779xx */ -}RCC_PeriphCLKInitTypeDef; -/** - * @} - */ - -/* Exported constants --------------------------------------------------------*/ -/** @defgroup RCCEx_Exported_Constants RCCEx Exported Constants - * @{ - */ - -/** @defgroup RCCEx_Periph_Clock_Selection RCC Periph Clock Selection - * @{ - */ -#define RCC_PERIPHCLK_I2S ((uint32_t)0x00000001U) -#if defined(STM32F746xx) || defined(STM32F756xx) || defined (STM32F767xx) || defined (STM32F769xx) || defined (STM32F777xx) || defined (STM32F779xx) || defined (STM32F750xx) -#define RCC_PERIPHCLK_LTDC ((uint32_t)0x00000008U) -#endif /* STM32F746xx || STM32F756xx || STM32F767xx || STM32F769xx || STM32F777xx || STM32F779xx || STM32F750xx */ -#define RCC_PERIPHCLK_TIM ((uint32_t)0x00000010U) -#define RCC_PERIPHCLK_RTC ((uint32_t)0x00000020U) -#define RCC_PERIPHCLK_USART1 ((uint32_t)0x00000040U) -#define RCC_PERIPHCLK_USART2 ((uint32_t)0x00000080U) -#define RCC_PERIPHCLK_USART3 ((uint32_t)0x00000100U) -#define RCC_PERIPHCLK_UART4 ((uint32_t)0x00000200U) -#define RCC_PERIPHCLK_UART5 ((uint32_t)0x00000400U) -#define RCC_PERIPHCLK_USART6 ((uint32_t)0x00000800U) -#define RCC_PERIPHCLK_UART7 ((uint32_t)0x00001000U) -#define RCC_PERIPHCLK_UART8 ((uint32_t)0x00002000U) -#define RCC_PERIPHCLK_I2C1 ((uint32_t)0x00004000U) -#define RCC_PERIPHCLK_I2C2 ((uint32_t)0x00008000U) -#define RCC_PERIPHCLK_I2C3 ((uint32_t)0x00010000U) -#define RCC_PERIPHCLK_I2C4 ((uint32_t)0x00020000U) -#define RCC_PERIPHCLK_LPTIM1 ((uint32_t)0x00040000U) -#define RCC_PERIPHCLK_SAI1 ((uint32_t)0x00080000U) -#define RCC_PERIPHCLK_SAI2 ((uint32_t)0x00100000U) -#define RCC_PERIPHCLK_CLK48 ((uint32_t)0x00200000U) -#define RCC_PERIPHCLK_CEC ((uint32_t)0x00400000U) -#define RCC_PERIPHCLK_SDMMC1 ((uint32_t)0x00800000U) -#define RCC_PERIPHCLK_SPDIFRX ((uint32_t)0x01000000U) -#define RCC_PERIPHCLK_PLLI2S ((uint32_t)0x02000000U) -#if defined (STM32F722xx) || defined (STM32F723xx) || defined (STM32F732xx) || defined (STM32F733xx) || defined (STM32F765xx) ||\ - defined (STM32F767xx) || defined (STM32F769xx) || defined (STM32F777xx) || defined (STM32F779xx) || defined (STM32F730xx) -#define RCC_PERIPHCLK_SDMMC2 ((uint32_t)0x04000000U) -#endif /* STM32F722xx || STM32F723xx || STM32F732xx || STM32F733xx || STM32F765xx || STM32F767xx || STM32F769xx || STM32F777xx || STM32F779xx || STM32F730xx */ -#if defined (STM32F765xx) || defined (STM32F767xx) || defined (STM32F769xx) || defined (STM32F777xx) || defined (STM32F779xx) -#define RCC_PERIPHCLK_DFSDM1 ((uint32_t)0x08000000U) -#define RCC_PERIPHCLK_DFSDM1_AUDIO ((uint32_t)0x10000000U) -#endif /* STM32F765xx || STM32F767xx || STM32F769xx || STM32F777xx || STM32F779xx */ - -/** - * @} - */ - -#if defined (STM32F745xx) || defined (STM32F746xx) || defined (STM32F756xx) || defined (STM32F765xx) || defined (STM32F767xx) || \ - defined (STM32F769xx) || defined (STM32F777xx) || defined (STM32F779xx) || defined (STM32F750xx) -/** @defgroup RCCEx_PLLI2SP_Clock_Divider RCCEx PLLI2SP Clock Divider - * @{ - */ -#define RCC_PLLI2SP_DIV2 ((uint32_t)0x00000000U) -#define RCC_PLLI2SP_DIV4 ((uint32_t)0x00000001U) -#define RCC_PLLI2SP_DIV6 ((uint32_t)0x00000002U) -#define RCC_PLLI2SP_DIV8 ((uint32_t)0x00000003U) -/** - * @} - */ -#endif /* STM32F745xx || STM32F746xx || STM32F756xx || STM32F765xx || STM32F767xx || STM32F769xx || STM32F777xx || STM32F779xx || STM32F750xx */ - -/** @defgroup RCCEx_PLLSAIP_Clock_Divider RCCEx PLLSAIP Clock Divider - * @{ - */ -#define RCC_PLLSAIP_DIV2 ((uint32_t)0x00000000U) -#define RCC_PLLSAIP_DIV4 ((uint32_t)0x00000001U) -#define RCC_PLLSAIP_DIV6 ((uint32_t)0x00000002U) -#define RCC_PLLSAIP_DIV8 ((uint32_t)0x00000003U) -/** - * @} - */ - -/** @defgroup RCCEx_PLLSAI_DIVR RCCEx PLLSAI DIVR - * @{ - */ -#define RCC_PLLSAIDIVR_2 ((uint32_t)0x00000000U) -#define RCC_PLLSAIDIVR_4 RCC_DCKCFGR1_PLLSAIDIVR_0 -#define RCC_PLLSAIDIVR_8 RCC_DCKCFGR1_PLLSAIDIVR_1 -#define RCC_PLLSAIDIVR_16 RCC_DCKCFGR1_PLLSAIDIVR -/** - * @} - */ - -/** @defgroup RCCEx_I2S_Clock_Source RCCEx I2S Clock Source - * @{ - */ -#define RCC_I2SCLKSOURCE_PLLI2S ((uint32_t)0x00000000U) -#define RCC_I2SCLKSOURCE_EXT RCC_CFGR_I2SSRC - -/** - * @} - */ - -/** @defgroup RCCEx_SAI1_Clock_Source RCCEx SAI1 Clock Source - * @{ - */ -#define RCC_SAI1CLKSOURCE_PLLSAI ((uint32_t)0x00000000U) -#define RCC_SAI1CLKSOURCE_PLLI2S RCC_DCKCFGR1_SAI1SEL_0 -#define RCC_SAI1CLKSOURCE_PIN RCC_DCKCFGR1_SAI1SEL_1 -#if defined (STM32F765xx) || defined (STM32F767xx) || defined (STM32F769xx) || defined (STM32F777xx) || defined (STM32F779xx) -#define RCC_SAI1CLKSOURCE_PLLSRC RCC_DCKCFGR1_SAI1SEL -#endif /* STM32F765xx || STM32F767xx || STM32F769xx || STM32F777xx || STM32F779xx */ -/** - * @} - */ - -/** @defgroup RCCEx_SAI2_Clock_Source RCCEx SAI2 Clock Source - * @{ - */ -#define RCC_SAI2CLKSOURCE_PLLSAI ((uint32_t)0x00000000U) -#define RCC_SAI2CLKSOURCE_PLLI2S RCC_DCKCFGR1_SAI2SEL_0 -#define RCC_SAI2CLKSOURCE_PIN RCC_DCKCFGR1_SAI2SEL_1 -#if defined (STM32F765xx) || defined (STM32F767xx) || defined (STM32F769xx) || defined (STM32F777xx) || defined (STM32F779xx) -#define RCC_SAI2CLKSOURCE_PLLSRC RCC_DCKCFGR1_SAI2SEL -#endif /* STM32F765xx || STM32F767xx || STM32F769xx || STM32F777xx || STM32F779xx */ -/** - * @} - */ - -/** @defgroup RCCEx_CEC_Clock_Source RCCEx CEC Clock Source - * @{ - */ -#define RCC_CECCLKSOURCE_LSE ((uint32_t)0x00000000U) -#define RCC_CECCLKSOURCE_HSI RCC_DCKCFGR2_CECSEL /* CEC clock is HSI/488*/ -/** - * @} - */ - -/** @defgroup RCCEx_USART1_Clock_Source RCCEx USART1 Clock Source - * @{ - */ -#define RCC_USART1CLKSOURCE_PCLK2 ((uint32_t)0x00000000U) -#define RCC_USART1CLKSOURCE_SYSCLK RCC_DCKCFGR2_USART1SEL_0 -#define RCC_USART1CLKSOURCE_HSI RCC_DCKCFGR2_USART1SEL_1 -#define RCC_USART1CLKSOURCE_LSE RCC_DCKCFGR2_USART1SEL -/** - * @} - */ - -/** @defgroup RCCEx_USART2_Clock_Source RCCEx USART2 Clock Source - * @{ - */ -#define RCC_USART2CLKSOURCE_PCLK1 ((uint32_t)0x00000000U) -#define RCC_USART2CLKSOURCE_SYSCLK RCC_DCKCFGR2_USART2SEL_0 -#define RCC_USART2CLKSOURCE_HSI RCC_DCKCFGR2_USART2SEL_1 -#define RCC_USART2CLKSOURCE_LSE RCC_DCKCFGR2_USART2SEL -/** - * @} - */ - -/** @defgroup RCCEx_USART3_Clock_Source RCCEx USART3 Clock Source - * @{ - */ -#define RCC_USART3CLKSOURCE_PCLK1 ((uint32_t)0x00000000U) -#define RCC_USART3CLKSOURCE_SYSCLK RCC_DCKCFGR2_USART3SEL_0 -#define RCC_USART3CLKSOURCE_HSI RCC_DCKCFGR2_USART3SEL_1 -#define RCC_USART3CLKSOURCE_LSE RCC_DCKCFGR2_USART3SEL -/** - * @} - */ - -/** @defgroup RCCEx_UART4_Clock_Source RCCEx UART4 Clock Source - * @{ - */ -#define RCC_UART4CLKSOURCE_PCLK1 ((uint32_t)0x00000000U) -#define RCC_UART4CLKSOURCE_SYSCLK RCC_DCKCFGR2_UART4SEL_0 -#define RCC_UART4CLKSOURCE_HSI RCC_DCKCFGR2_UART4SEL_1 -#define RCC_UART4CLKSOURCE_LSE RCC_DCKCFGR2_UART4SEL -/** - * @} - */ - -/** @defgroup RCCEx_UART5_Clock_Source RCCEx UART5 Clock Source - * @{ - */ -#define RCC_UART5CLKSOURCE_PCLK1 ((uint32_t)0x00000000U) -#define RCC_UART5CLKSOURCE_SYSCLK RCC_DCKCFGR2_UART5SEL_0 -#define RCC_UART5CLKSOURCE_HSI RCC_DCKCFGR2_UART5SEL_1 -#define RCC_UART5CLKSOURCE_LSE RCC_DCKCFGR2_UART5SEL -/** - * @} - */ - -/** @defgroup RCCEx_USART6_Clock_Source RCCEx USART6 Clock Source - * @{ - */ -#define RCC_USART6CLKSOURCE_PCLK2 ((uint32_t)0x00000000U) -#define RCC_USART6CLKSOURCE_SYSCLK RCC_DCKCFGR2_USART6SEL_0 -#define RCC_USART6CLKSOURCE_HSI RCC_DCKCFGR2_USART6SEL_1 -#define RCC_USART6CLKSOURCE_LSE RCC_DCKCFGR2_USART6SEL -/** - * @} - */ - -/** @defgroup RCCEx_UART7_Clock_Source RCCEx UART7 Clock Source - * @{ - */ -#define RCC_UART7CLKSOURCE_PCLK1 ((uint32_t)0x00000000U) -#define RCC_UART7CLKSOURCE_SYSCLK RCC_DCKCFGR2_UART7SEL_0 -#define RCC_UART7CLKSOURCE_HSI RCC_DCKCFGR2_UART7SEL_1 -#define RCC_UART7CLKSOURCE_LSE RCC_DCKCFGR2_UART7SEL -/** - * @} - */ - -/** @defgroup RCCEx_UART8_Clock_Source RCCEx UART8 Clock Source - * @{ - */ -#define RCC_UART8CLKSOURCE_PCLK1 ((uint32_t)0x00000000U) -#define RCC_UART8CLKSOURCE_SYSCLK RCC_DCKCFGR2_UART8SEL_0 -#define RCC_UART8CLKSOURCE_HSI RCC_DCKCFGR2_UART8SEL_1 -#define RCC_UART8CLKSOURCE_LSE RCC_DCKCFGR2_UART8SEL -/** - * @} - */ - -/** @defgroup RCCEx_I2C1_Clock_Source RCCEx I2C1 Clock Source - * @{ - */ -#define RCC_I2C1CLKSOURCE_PCLK1 ((uint32_t)0x00000000U) -#define RCC_I2C1CLKSOURCE_SYSCLK RCC_DCKCFGR2_I2C1SEL_0 -#define RCC_I2C1CLKSOURCE_HSI RCC_DCKCFGR2_I2C1SEL_1 -/** - * @} - */ - -/** @defgroup RCCEx_I2C2_Clock_Source RCCEx I2C2 Clock Source - * @{ - */ -#define RCC_I2C2CLKSOURCE_PCLK1 ((uint32_t)0x00000000U) -#define RCC_I2C2CLKSOURCE_SYSCLK RCC_DCKCFGR2_I2C2SEL_0 -#define RCC_I2C2CLKSOURCE_HSI RCC_DCKCFGR2_I2C2SEL_1 - -/** - * @} - */ - -/** @defgroup RCCEx_I2C3_Clock_Source RCCEx I2C3 Clock Source - * @{ - */ -#define RCC_I2C3CLKSOURCE_PCLK1 ((uint32_t)0x00000000U) -#define RCC_I2C3CLKSOURCE_SYSCLK RCC_DCKCFGR2_I2C3SEL_0 -#define RCC_I2C3CLKSOURCE_HSI RCC_DCKCFGR2_I2C3SEL_1 -/** - * @} - */ - -/** @defgroup RCCEx_I2C4_Clock_Source RCCEx I2C4 Clock Source - * @{ - */ -#define RCC_I2C4CLKSOURCE_PCLK1 ((uint32_t)0x00000000U) -#define RCC_I2C4CLKSOURCE_SYSCLK RCC_DCKCFGR2_I2C4SEL_0 -#define RCC_I2C4CLKSOURCE_HSI RCC_DCKCFGR2_I2C4SEL_1 -/** - * @} - */ - -/** @defgroup RCCEx_LPTIM1_Clock_Source RCCEx LPTIM1 Clock Source - * @{ - */ -#define RCC_LPTIM1CLKSOURCE_PCLK1 ((uint32_t)0x00000000U) -#define RCC_LPTIM1CLKSOURCE_LSI RCC_DCKCFGR2_LPTIM1SEL_0 -#define RCC_LPTIM1CLKSOURCE_HSI RCC_DCKCFGR2_LPTIM1SEL_1 -#define RCC_LPTIM1CLKSOURCE_LSE RCC_DCKCFGR2_LPTIM1SEL - -/** - * @} - */ - -/** @defgroup RCCEx_CLK48_Clock_Source RCCEx CLK48 Clock Source - * @{ - */ -#define RCC_CLK48SOURCE_PLL ((uint32_t)0x00000000U) -#define RCC_CLK48SOURCE_PLLSAIP RCC_DCKCFGR2_CK48MSEL -/** - * @} - */ - -/** @defgroup RCCEx_TIM_Prescaler_Selection RCCEx TIM Prescaler Selection - * @{ - */ -#define RCC_TIMPRES_DESACTIVATED ((uint32_t)0x00000000U) -#define RCC_TIMPRES_ACTIVATED RCC_DCKCFGR1_TIMPRE -/** - * @} - */ - -/** @defgroup RCCEx_SDMMC1_Clock_Source RCCEx SDMMC1 Clock Source - * @{ - */ -#define RCC_SDMMC1CLKSOURCE_CLK48 ((uint32_t)0x00000000U) -#define RCC_SDMMC1CLKSOURCE_SYSCLK RCC_DCKCFGR2_SDMMC1SEL -/** - * @} - */ - -#if defined (STM32F722xx) || defined (STM32F723xx) || defined (STM32F732xx) || defined (STM32F733xx) || defined (STM32F765xx) ||\ - defined (STM32F767xx) || defined (STM32F769xx) || defined (STM32F777xx) || defined (STM32F779xx) || defined (STM32F730xx) -/** @defgroup RCCEx_SDMMC2_Clock_Source RCCEx SDMMC2 Clock Source - * @{ - */ -#define RCC_SDMMC2CLKSOURCE_CLK48 ((uint32_t)0x00000000U) -#define RCC_SDMMC2CLKSOURCE_SYSCLK RCC_DCKCFGR2_SDMMC2SEL -/** - * @} - */ -#endif /* STM32F722xx || STM32F723xx || STM32F732xx || STM32F733xx || STM32F765xx || STM32F767xx || STM32F769xx || STM32F777xx || STM32F779xx || STM32F730xx */ - -#if defined (STM32F765xx) || defined (STM32F767xx) || defined (STM32F769xx) || defined (STM32F777xx) || defined (STM32F779xx) -/** @defgroup RCCEx_DFSDM1_Kernel_Clock_Source RCCEx DFSDM1 Kernel Clock Source - * @{ - */ -#define RCC_DFSDM1CLKSOURCE_PCLK2 ((uint32_t)0x00000000U) -#define RCC_DFSDM1CLKSOURCE_SYSCLK RCC_DCKCFGR1_DFSDM1SEL -/** - * @} - */ - -/** @defgroup RCCEx_DFSDM1_AUDIO_Clock_Source RCCEx DFSDM1 AUDIO Clock Source - * @{ - */ -#define RCC_DFSDM1AUDIOCLKSOURCE_SAI1 ((uint32_t)0x00000000U) -#define RCC_DFSDM1AUDIOCLKSOURCE_SAI2 RCC_DCKCFGR1_ADFSDM1SEL -/** - * @} - */ -#endif /* STM32F767xx || STM32F769xx || STM32F777xx || STM32F779xx */ - -#if defined (STM32F769xx) || defined (STM32F779xx) -/** @defgroup RCCEx_DSI_Clock_Source RCC DSI Clock Source - * @{ - */ -#define RCC_DSICLKSOURCE_DSIPHY ((uint32_t)0x00000000U) -#define RCC_DSICLKSOURCE_PLLR ((uint32_t)RCC_DCKCFGR2_DSISEL) -/** - * @} - */ -#endif /* STM32F769xx || STM32F779xx */ - -/** - * @} - */ - -/* Exported macro ------------------------------------------------------------*/ -/** @defgroup RCCEx_Exported_Macros RCCEx Exported Macros - * @{ - */ -/** @defgroup RCCEx_Peripheral_Clock_Enable_Disable RCCEx_Peripheral_Clock_Enable_Disable - * @brief Enables or disables the AHB/APB peripheral clock. - * @note After reset, the peripheral clock (used for registers read/write access) - * is disabled and the application software has to enable this clock before - * using it. - * @{ - */ - -/** @brief Enables or disables the AHB1 peripheral clock. - * @note After reset, the peripheral clock (used for registers read/write access) - * is disabled and the application software has to enable this clock before - * using it. - */ -#define __HAL_RCC_BKPSRAM_CLK_ENABLE() do { \ - __IO uint32_t tmpreg; \ - SET_BIT(RCC->AHB1ENR, RCC_AHB1ENR_BKPSRAMEN);\ - /* Delay after an RCC peripheral clock enabling */ \ - tmpreg = READ_BIT(RCC->AHB1ENR, RCC_AHB1ENR_BKPSRAMEN);\ - UNUSED(tmpreg); \ - } while(0) - -#define __HAL_RCC_DTCMRAMEN_CLK_ENABLE() do { \ - __IO uint32_t tmpreg; \ - SET_BIT(RCC->AHB1ENR, RCC_AHB1ENR_DTCMRAMEN);\ - /* Delay after an RCC peripheral clock enabling */ \ - tmpreg = READ_BIT(RCC->AHB1ENR, RCC_AHB1ENR_DTCMRAMEN);\ - UNUSED(tmpreg); \ - } while(0) - -#define __HAL_RCC_DMA2_CLK_ENABLE() do { \ - __IO uint32_t tmpreg; \ - SET_BIT(RCC->AHB1ENR, RCC_AHB1ENR_DMA2EN);\ - /* Delay after an RCC peripheral clock enabling */ \ - tmpreg = READ_BIT(RCC->AHB1ENR, RCC_AHB1ENR_DMA2EN);\ - UNUSED(tmpreg); \ - } while(0) - -#define __HAL_RCC_USB_OTG_HS_CLK_ENABLE() do { \ - __IO uint32_t tmpreg; \ - SET_BIT(RCC->AHB1ENR, RCC_AHB1ENR_OTGHSEN);\ - /* Delay after an RCC peripheral clock enabling */ \ - tmpreg = READ_BIT(RCC->AHB1ENR, RCC_AHB1ENR_OTGHSEN);\ - UNUSED(tmpreg); \ - } while(0) - -#define __HAL_RCC_USB_OTG_HS_ULPI_CLK_ENABLE() do { \ - __IO uint32_t tmpreg; \ - SET_BIT(RCC->AHB1ENR, RCC_AHB1ENR_OTGHSULPIEN);\ - /* Delay after an RCC peripheral clock enabling */ \ - tmpreg = READ_BIT(RCC->AHB1ENR, RCC_AHB1ENR_OTGHSULPIEN);\ - UNUSED(tmpreg); \ - } while(0) - -#define __HAL_RCC_GPIOA_CLK_ENABLE() do { \ - __IO uint32_t tmpreg; \ - SET_BIT(RCC->AHB1ENR, RCC_AHB1ENR_GPIOAEN);\ - /* Delay after an RCC peripheral clock enabling */ \ - tmpreg = READ_BIT(RCC->AHB1ENR, RCC_AHB1ENR_GPIOAEN);\ - UNUSED(tmpreg); \ - } while(0) - -#define __HAL_RCC_GPIOB_CLK_ENABLE() do { \ - __IO uint32_t tmpreg; \ - SET_BIT(RCC->AHB1ENR, RCC_AHB1ENR_GPIOBEN);\ - /* Delay after an RCC peripheral clock enabling */ \ - tmpreg = READ_BIT(RCC->AHB1ENR, RCC_AHB1ENR_GPIOBEN);\ - UNUSED(tmpreg); \ - } while(0) - -#define __HAL_RCC_GPIOC_CLK_ENABLE() do { \ - __IO uint32_t tmpreg; \ - SET_BIT(RCC->AHB1ENR, RCC_AHB1ENR_GPIOCEN);\ - /* Delay after an RCC peripheral clock enabling */ \ - tmpreg = READ_BIT(RCC->AHB1ENR, RCC_AHB1ENR_GPIOCEN);\ - UNUSED(tmpreg); \ - } while(0) - -#define __HAL_RCC_GPIOD_CLK_ENABLE() do { \ - __IO uint32_t tmpreg; \ - SET_BIT(RCC->AHB1ENR, RCC_AHB1ENR_GPIODEN);\ - /* Delay after an RCC peripheral clock enabling */ \ - tmpreg = READ_BIT(RCC->AHB1ENR, RCC_AHB1ENR_GPIODEN);\ - UNUSED(tmpreg); \ - } while(0) - -#define __HAL_RCC_GPIOE_CLK_ENABLE() do { \ - __IO uint32_t tmpreg; \ - SET_BIT(RCC->AHB1ENR, RCC_AHB1ENR_GPIOEEN);\ - /* Delay after an RCC peripheral clock enabling */ \ - tmpreg = READ_BIT(RCC->AHB1ENR, RCC_AHB1ENR_GPIOEEN);\ - UNUSED(tmpreg); \ - } while(0) - -#define __HAL_RCC_GPIOF_CLK_ENABLE() do { \ - __IO uint32_t tmpreg; \ - SET_BIT(RCC->AHB1ENR, RCC_AHB1ENR_GPIOFEN);\ - /* Delay after an RCC peripheral clock enabling */ \ - tmpreg = READ_BIT(RCC->AHB1ENR, RCC_AHB1ENR_GPIOFEN);\ - UNUSED(tmpreg); \ - } while(0) - -#define __HAL_RCC_GPIOG_CLK_ENABLE() do { \ - __IO uint32_t tmpreg; \ - SET_BIT(RCC->AHB1ENR, RCC_AHB1ENR_GPIOGEN);\ - /* Delay after an RCC peripheral clock enabling */ \ - tmpreg = READ_BIT(RCC->AHB1ENR, RCC_AHB1ENR_GPIOGEN);\ - UNUSED(tmpreg); \ - } while(0) - -#define __HAL_RCC_GPIOH_CLK_ENABLE() do { \ - __IO uint32_t tmpreg; \ - SET_BIT(RCC->AHB1ENR, RCC_AHB1ENR_GPIOHEN);\ - /* Delay after an RCC peripheral clock enabling */ \ - tmpreg = READ_BIT(RCC->AHB1ENR, RCC_AHB1ENR_GPIOHEN);\ - UNUSED(tmpreg); \ - } while(0) - -#define __HAL_RCC_GPIOI_CLK_ENABLE() do { \ - __IO uint32_t tmpreg; \ - SET_BIT(RCC->AHB1ENR, RCC_AHB1ENR_GPIOIEN);\ - /* Delay after an RCC peripheral clock enabling */ \ - tmpreg = READ_BIT(RCC->AHB1ENR, RCC_AHB1ENR_GPIOIEN);\ - UNUSED(tmpreg); \ - } while(0) - -#if defined (STM32F745xx) || defined (STM32F746xx) || defined (STM32F756xx) || defined (STM32F765xx) ||\ - defined (STM32F767xx) || defined (STM32F769xx) || defined (STM32F777xx) || defined (STM32F779xx) ||\ - defined (STM32F750xx) -#define __HAL_RCC_GPIOJ_CLK_ENABLE() do { \ - __IO uint32_t tmpreg; \ - SET_BIT(RCC->AHB1ENR, RCC_AHB1ENR_GPIOJEN);\ - /* Delay after an RCC peripheral clock enabling */ \ - tmpreg = READ_BIT(RCC->AHB1ENR, RCC_AHB1ENR_GPIOJEN);\ - UNUSED(tmpreg); \ - } while(0) - -#define __HAL_RCC_GPIOK_CLK_ENABLE() do { \ - __IO uint32_t tmpreg; \ - SET_BIT(RCC->AHB1ENR, RCC_AHB1ENR_GPIOKEN);\ - /* Delay after an RCC peripheral clock enabling */ \ - tmpreg = READ_BIT(RCC->AHB1ENR, RCC_AHB1ENR_GPIOKEN);\ - UNUSED(tmpreg); \ - } while(0) - -#define __HAL_RCC_DMA2D_CLK_ENABLE() do { \ - __IO uint32_t tmpreg; \ - SET_BIT(RCC->AHB1ENR, RCC_AHB1ENR_DMA2DEN);\ - /* Delay after an RCC peripheral clock enabling */ \ - tmpreg = READ_BIT(RCC->AHB1ENR, RCC_AHB1ENR_DMA2DEN);\ - UNUSED(tmpreg); \ - } while(0) -#endif /* STM32F745xx || STM32F746xx || STM32F756xx || STM32F765xx || STM32F767xx || STM32F769xx || STM32F777xx || STM32F779xx || STM32F750xx */ - -#define __HAL_RCC_BKPSRAM_CLK_DISABLE() (RCC->AHB1ENR &= ~(RCC_AHB1ENR_BKPSRAMEN)) -#define __HAL_RCC_DTCMRAMEN_CLK_DISABLE() (RCC->AHB1ENR &= ~(RCC_AHB1ENR_DTCMRAMEN)) -#define __HAL_RCC_DMA2_CLK_DISABLE() (RCC->AHB1ENR &= ~(RCC_AHB1ENR_DMA2EN)) -#define __HAL_RCC_USB_OTG_HS_CLK_DISABLE() (RCC->AHB1ENR &= ~(RCC_AHB1ENR_OTGHSEN)) -#define __HAL_RCC_USB_OTG_HS_ULPI_CLK_DISABLE() (RCC->AHB1ENR &= ~(RCC_AHB1ENR_OTGHSULPIEN)) -#define __HAL_RCC_GPIOA_CLK_DISABLE() (RCC->AHB1ENR &= ~(RCC_AHB1ENR_GPIOAEN)) -#define __HAL_RCC_GPIOB_CLK_DISABLE() (RCC->AHB1ENR &= ~(RCC_AHB1ENR_GPIOBEN)) -#define __HAL_RCC_GPIOC_CLK_DISABLE() (RCC->AHB1ENR &= ~(RCC_AHB1ENR_GPIOCEN)) -#define __HAL_RCC_GPIOD_CLK_DISABLE() (RCC->AHB1ENR &= ~(RCC_AHB1ENR_GPIODEN)) -#define __HAL_RCC_GPIOE_CLK_DISABLE() (RCC->AHB1ENR &= ~(RCC_AHB1ENR_GPIOEEN)) -#define __HAL_RCC_GPIOF_CLK_DISABLE() (RCC->AHB1ENR &= ~(RCC_AHB1ENR_GPIOFEN)) -#define __HAL_RCC_GPIOG_CLK_DISABLE() (RCC->AHB1ENR &= ~(RCC_AHB1ENR_GPIOGEN)) -#define __HAL_RCC_GPIOH_CLK_DISABLE() (RCC->AHB1ENR &= ~(RCC_AHB1ENR_GPIOHEN)) -#define __HAL_RCC_GPIOI_CLK_DISABLE() (RCC->AHB1ENR &= ~(RCC_AHB1ENR_GPIOIEN)) -#if defined (STM32F745xx) || defined (STM32F746xx) || defined (STM32F756xx) || defined (STM32F765xx) ||\ - defined (STM32F767xx) || defined (STM32F769xx) || defined (STM32F777xx) || defined (STM32F779xx) ||\ - defined (STM32F750xx) -#define __HAL_RCC_GPIOJ_CLK_DISABLE() (RCC->AHB1ENR &= ~(RCC_AHB1ENR_GPIOJEN)) -#define __HAL_RCC_GPIOK_CLK_DISABLE() (RCC->AHB1ENR &= ~(RCC_AHB1ENR_GPIOKEN)) -#define __HAL_RCC_DMA2D_CLK_DISABLE() (RCC->AHB1ENR &= ~(RCC_AHB1ENR_DMA2DEN)) -#endif /* STM32F745xx || STM32F746xx || STM32F756xx || STM32F765xx || STM32F767xx || STM32F769xx || STM32F777xx || STM32F779xx || STM32F750xx */ - -#if defined (STM32F745xx) || defined (STM32F746xx) || defined (STM32F756xx) || defined (STM32F765xx) ||\ - defined (STM32F767xx) || defined (STM32F769xx) || defined (STM32F777xx) || defined (STM32F779xx) ||\ - defined (STM32F750xx) -/** - * @brief Enable ETHERNET clock. - */ -#define __HAL_RCC_ETHMAC_CLK_ENABLE() do { \ - __IO uint32_t tmpreg; \ - SET_BIT(RCC->AHB1ENR, RCC_AHB1ENR_ETHMACEN);\ - /* Delay after an RCC peripheral clock enabling */ \ - tmpreg = READ_BIT(RCC->AHB1ENR, RCC_AHB1ENR_ETHMACEN);\ - UNUSED(tmpreg); \ - } while(0) - -#define __HAL_RCC_ETHMACTX_CLK_ENABLE() do { \ - __IO uint32_t tmpreg; \ - SET_BIT(RCC->AHB1ENR, RCC_AHB1ENR_ETHMACTXEN);\ - /* Delay after an RCC peripheral clock enabling */ \ - tmpreg = READ_BIT(RCC->AHB1ENR, RCC_AHB1ENR_ETHMACTXEN);\ - UNUSED(tmpreg); \ - } while(0) - -#define __HAL_RCC_ETHMACRX_CLK_ENABLE() do { \ - __IO uint32_t tmpreg; \ - SET_BIT(RCC->AHB1ENR, RCC_AHB1ENR_ETHMACRXEN);\ - /* Delay after an RCC peripheral clock enabling */ \ - tmpreg = READ_BIT(RCC->AHB1ENR, RCC_AHB1ENR_ETHMACRXEN);\ - UNUSED(tmpreg); \ - } while(0) - -#define __HAL_RCC_ETHMACPTP_CLK_ENABLE() do { \ - __IO uint32_t tmpreg; \ - SET_BIT(RCC->AHB1ENR, RCC_AHB1ENR_ETHMACPTPEN);\ - /* Delay after an RCC peripheral clock enabling */ \ - tmpreg = READ_BIT(RCC->AHB1ENR, RCC_AHB1ENR_ETHMACPTPEN);\ - UNUSED(tmpreg); \ - } while(0) - -#define __HAL_RCC_ETH_CLK_ENABLE() do { \ - __HAL_RCC_ETHMAC_CLK_ENABLE(); \ - __HAL_RCC_ETHMACTX_CLK_ENABLE(); \ - __HAL_RCC_ETHMACRX_CLK_ENABLE(); \ - } while(0) -/** - * @brief Disable ETHERNET clock. - */ -#define __HAL_RCC_ETHMAC_CLK_DISABLE() (RCC->AHB1ENR &= ~(RCC_AHB1ENR_ETHMACEN)) -#define __HAL_RCC_ETHMACTX_CLK_DISABLE() (RCC->AHB1ENR &= ~(RCC_AHB1ENR_ETHMACTXEN)) -#define __HAL_RCC_ETHMACRX_CLK_DISABLE() (RCC->AHB1ENR &= ~(RCC_AHB1ENR_ETHMACRXEN)) -#define __HAL_RCC_ETHMACPTP_CLK_DISABLE() (RCC->AHB1ENR &= ~(RCC_AHB1ENR_ETHMACPTPEN)) -#define __HAL_RCC_ETH_CLK_DISABLE() do { \ - __HAL_RCC_ETHMACTX_CLK_DISABLE(); \ - __HAL_RCC_ETHMACRX_CLK_DISABLE(); \ - __HAL_RCC_ETHMAC_CLK_DISABLE(); \ - } while(0) -#endif /* STM32F745xx || STM32F746xx || STM32F756xx || STM32F765xx || STM32F767xx || STM32F769xx || STM32F777xx || STM32F779xx || STM32F750xx */ - -/** @brief Enable or disable the AHB2 peripheral clock. - * @note After reset, the peripheral clock (used for registers read/write access) - * is disabled and the application software has to enable this clock before - * using it. - */ -#if defined (STM32F745xx) || defined (STM32F746xx) || defined (STM32F756xx) || defined (STM32F765xx) ||\ - defined (STM32F767xx) || defined (STM32F769xx) || defined (STM32F777xx) || defined (STM32F779xx) ||\ - defined (STM32F750xx) -#define __HAL_RCC_DCMI_CLK_ENABLE() do { \ - __IO uint32_t tmpreg; \ - SET_BIT(RCC->AHB2ENR, RCC_AHB2ENR_DCMIEN);\ - /* Delay after an RCC peripheral clock enabling */ \ - tmpreg = READ_BIT(RCC->AHB2ENR, RCC_AHB2ENR_DCMIEN);\ - UNUSED(tmpreg); \ - } while(0) -#define __HAL_RCC_DCMI_CLK_DISABLE() (RCC->AHB2ENR &= ~(RCC_AHB2ENR_DCMIEN)) -#endif /* STM32F745xx || STM32F746xx || STM32F756xx || STM32F765xx || STM32F767xx || STM32F769xx || STM32F777xx || STM32F779xx || STM32F750xx */ - -#if defined (STM32F767xx) || defined (STM32F769xx) || defined (STM32F777xx) || defined (STM32F779xx) -#define __HAL_RCC_JPEG_CLK_ENABLE() do { \ - __IO uint32_t tmpreg; \ - SET_BIT(RCC->AHB2ENR, RCC_AHB2ENR_JPEGEN);\ - /* Delay after an RCC peripheral clock enabling */ \ - tmpreg = READ_BIT(RCC->AHB2ENR, RCC_AHB2ENR_JPEGEN);\ - UNUSED(tmpreg); \ - } while(0) -#define __HAL_RCC_JPEG_CLK_DISABLE() (RCC->AHB2ENR &= ~(RCC_AHB2ENR_JPEGEN)) -#endif /* STM32F767xx || STM32F769xx || STM32F777xx || STM32F779xx */ - -#define __HAL_RCC_RNG_CLK_ENABLE() do { \ - __IO uint32_t tmpreg; \ - SET_BIT(RCC->AHB2ENR, RCC_AHB2ENR_RNGEN);\ - /* Delay after an RCC peripheral clock enabling */ \ - tmpreg = READ_BIT(RCC->AHB2ENR, RCC_AHB2ENR_RNGEN);\ - UNUSED(tmpreg); \ - } while(0) - -#define __HAL_RCC_USB_OTG_FS_CLK_ENABLE() do { \ - __IO uint32_t tmpreg; \ - SET_BIT(RCC->AHB2ENR, RCC_AHB2ENR_OTGFSEN);\ - /* Delay after an RCC peripheral clock enabling */ \ - tmpreg = READ_BIT(RCC->AHB2ENR, RCC_AHB2ENR_OTGFSEN);\ - UNUSED(tmpreg); \ - __HAL_RCC_SYSCFG_CLK_ENABLE();\ - } while(0) - -#define __HAL_RCC_RNG_CLK_DISABLE() (RCC->AHB2ENR &= ~(RCC_AHB2ENR_RNGEN)) - -#define __HAL_RCC_USB_OTG_FS_CLK_DISABLE() (RCC->AHB2ENR &= ~(RCC_AHB2ENR_OTGFSEN)) -#if defined(STM32F756xx) || defined (STM32F777xx) || defined (STM32F779xx) || defined (STM32F750xx) -#define __HAL_RCC_CRYP_CLK_ENABLE() do { \ - __IO uint32_t tmpreg; \ - SET_BIT(RCC->AHB2ENR, RCC_AHB2ENR_CRYPEN);\ - /* Delay after an RCC peripheral clock enabling */ \ - tmpreg = READ_BIT(RCC->AHB2ENR, RCC_AHB2ENR_CRYPEN);\ - UNUSED(tmpreg); \ - } while(0) - -#define __HAL_RCC_HASH_CLK_ENABLE() do { \ - __IO uint32_t tmpreg; \ - SET_BIT(RCC->AHB2ENR, RCC_AHB2ENR_HASHEN);\ - /* Delay after an RCC peripheral clock enabling */ \ - tmpreg = READ_BIT(RCC->AHB2ENR, RCC_AHB2ENR_HASHEN);\ - UNUSED(tmpreg); \ - } while(0) - -#define __HAL_RCC_CRYP_CLK_DISABLE() (RCC->AHB2ENR &= ~(RCC_AHB2ENR_CRYPEN)) -#define __HAL_RCC_HASH_CLK_DISABLE() (RCC->AHB2ENR &= ~(RCC_AHB2ENR_HASHEN)) -#endif /* STM32F756x || STM32F777xx || STM32F779xx || STM32F750xx */ - -#if defined(STM32F732xx) || defined (STM32F733xx) || defined (STM32F730xx) -#define __HAL_RCC_AES_CLK_ENABLE() do { \ - __IO uint32_t tmpreg; \ - SET_BIT(RCC->AHB2ENR, RCC_AHB2ENR_AESEN);\ - /* Delay after an RCC peripheral clock enabling */ \ - tmpreg = READ_BIT(RCC->AHB2ENR, RCC_AHB2ENR_AESEN);\ - UNUSED(tmpreg); \ - } while(0) - -#define __HAL_RCC_AES_CLK_DISABLE() (RCC->AHB2ENR &= ~(RCC_AHB2ENR_AESEN)) -#endif /* STM32F732xx || STM32F733xx || STM32F730xx */ - -/** @brief Enables or disables the AHB3 peripheral clock. - * @note After reset, the peripheral clock (used for registers read/write access) - * is disabled and the application software has to enable this clock before - * using it. - */ -#define __HAL_RCC_FMC_CLK_ENABLE() do { \ - __IO uint32_t tmpreg; \ - SET_BIT(RCC->AHB3ENR, RCC_AHB3ENR_FMCEN);\ - /* Delay after an RCC peripheral clock enabling */ \ - tmpreg = READ_BIT(RCC->AHB3ENR, RCC_AHB3ENR_FMCEN);\ - UNUSED(tmpreg); \ - } while(0) - -#define __HAL_RCC_QSPI_CLK_ENABLE() do { \ - __IO uint32_t tmpreg; \ - SET_BIT(RCC->AHB3ENR, RCC_AHB3ENR_QSPIEN);\ - /* Delay after an RCC peripheral clock enabling */ \ - tmpreg = READ_BIT(RCC->AHB3ENR, RCC_AHB3ENR_QSPIEN);\ - UNUSED(tmpreg); \ - } while(0) - -#define __HAL_RCC_FMC_CLK_DISABLE() (RCC->AHB3ENR &= ~(RCC_AHB3ENR_FMCEN)) -#define __HAL_RCC_QSPI_CLK_DISABLE() (RCC->AHB3ENR &= ~(RCC_AHB3ENR_QSPIEN)) - -/** @brief Enable or disable the Low Speed APB (APB1) peripheral clock. - * @note After reset, the peripheral clock (used for registers read/write access) - * is disabled and the application software has to enable this clock before - * using it. - */ -#define __HAL_RCC_TIM2_CLK_ENABLE() do { \ - __IO uint32_t tmpreg; \ - SET_BIT(RCC->APB1ENR, RCC_APB1ENR_TIM2EN);\ - /* Delay after an RCC peripheral clock enabling */ \ - tmpreg = READ_BIT(RCC->APB1ENR, RCC_APB1ENR_TIM2EN);\ - UNUSED(tmpreg); \ - } while(0) - -#define __HAL_RCC_TIM3_CLK_ENABLE() do { \ - __IO uint32_t tmpreg; \ - SET_BIT(RCC->APB1ENR, RCC_APB1ENR_TIM3EN);\ - /* Delay after an RCC peripheral clock enabling */ \ - tmpreg = READ_BIT(RCC->APB1ENR, RCC_APB1ENR_TIM3EN);\ - UNUSED(tmpreg); \ - } while(0) - -#define __HAL_RCC_TIM4_CLK_ENABLE() do { \ - __IO uint32_t tmpreg; \ - SET_BIT(RCC->APB1ENR, RCC_APB1ENR_TIM4EN);\ - /* Delay after an RCC peripheral clock enabling */ \ - tmpreg = READ_BIT(RCC->APB1ENR, RCC_APB1ENR_TIM4EN);\ - UNUSED(tmpreg); \ - } while(0) - -#define __HAL_RCC_TIM5_CLK_ENABLE() do { \ - __IO uint32_t tmpreg; \ - SET_BIT(RCC->APB1ENR, RCC_APB1ENR_TIM5EN);\ - /* Delay after an RCC peripheral clock enabling */ \ - tmpreg = READ_BIT(RCC->APB1ENR, RCC_APB1ENR_TIM5EN);\ - UNUSED(tmpreg); \ - } while(0) - -#define __HAL_RCC_TIM6_CLK_ENABLE() do { \ - __IO uint32_t tmpreg; \ - SET_BIT(RCC->APB1ENR, RCC_APB1ENR_TIM6EN);\ - /* Delay after an RCC peripheral clock enabling */ \ - tmpreg = READ_BIT(RCC->APB1ENR, RCC_APB1ENR_TIM6EN);\ - UNUSED(tmpreg); \ - } while(0) - -#define __HAL_RCC_TIM7_CLK_ENABLE() do { \ - __IO uint32_t tmpreg; \ - SET_BIT(RCC->APB1ENR, RCC_APB1ENR_TIM7EN);\ - /* Delay after an RCC peripheral clock enabling */ \ - tmpreg = READ_BIT(RCC->APB1ENR, RCC_APB1ENR_TIM7EN);\ - UNUSED(tmpreg); \ - } while(0) - -#define __HAL_RCC_TIM12_CLK_ENABLE() do { \ - __IO uint32_t tmpreg; \ - SET_BIT(RCC->APB1ENR, RCC_APB1ENR_TIM12EN);\ - /* Delay after an RCC peripheral clock enabling */ \ - tmpreg = READ_BIT(RCC->APB1ENR, RCC_APB1ENR_TIM12EN);\ - UNUSED(tmpreg); \ - } while(0) - -#define __HAL_RCC_TIM13_CLK_ENABLE() do { \ - __IO uint32_t tmpreg; \ - SET_BIT(RCC->APB1ENR, RCC_APB1ENR_TIM13EN);\ - /* Delay after an RCC peripheral clock enabling */ \ - tmpreg = READ_BIT(RCC->APB1ENR, RCC_APB1ENR_TIM13EN);\ - UNUSED(tmpreg); \ - } while(0) - -#define __HAL_RCC_TIM14_CLK_ENABLE() do { \ - __IO uint32_t tmpreg; \ - SET_BIT(RCC->APB1ENR, RCC_APB1ENR_TIM14EN);\ - /* Delay after an RCC peripheral clock enabling */ \ - tmpreg = READ_BIT(RCC->APB1ENR, RCC_APB1ENR_TIM14EN);\ - UNUSED(tmpreg); \ - } while(0) - -#define __HAL_RCC_LPTIM1_CLK_ENABLE() do { \ - __IO uint32_t tmpreg; \ - SET_BIT(RCC->APB1ENR, RCC_APB1ENR_LPTIM1EN);\ - /* Delay after an RCC peripheral clock enabling */ \ - tmpreg = READ_BIT(RCC->APB1ENR, RCC_APB1ENR_LPTIM1EN);\ - UNUSED(tmpreg); \ - } while(0) - -#if defined (STM32F722xx) || defined (STM32F723xx) || defined (STM32F732xx) || defined (STM32F733xx) ||\ - defined (STM32F765xx) || defined (STM32F767xx) || defined (STM32F769xx) || defined (STM32F777xx) ||\ - defined (STM32F779xx) || defined (STM32F730xx) -#define __HAL_RCC_RTC_CLK_ENABLE() do { \ - __IO uint32_t tmpreg; \ - SET_BIT(RCC->APB1ENR, RCC_APB1ENR_RTCEN);\ - /* Delay after an RCC peripheral clock enabling */ \ - tmpreg = READ_BIT(RCC->APB1ENR, RCC_APB1ENR_RTCEN);\ - UNUSED(tmpreg); \ - } while(0) -#endif /* STM32F722xx || STM32F723xx || STM32F732xx || STM32F733xx || STM32F765xx || STM32F767xx || - STM32F769xx || STM32F777xx || STM32F779xx || STM32F730xx */ - -#if defined (STM32F765xx) || defined (STM32F767xx) || defined (STM32F769xx) || defined (STM32F777xx) || defined (STM32F779xx) -#define __HAL_RCC_CAN3_CLK_ENABLE() do { \ - __IO uint32_t tmpreg; \ - SET_BIT(RCC->APB1ENR, RCC_APB1ENR_CAN3EN);\ - /* Delay after an RCC peripheral clock enabling */ \ - tmpreg = READ_BIT(RCC->APB1ENR, RCC_APB1ENR_CAN3EN);\ - UNUSED(tmpreg); \ - } while(0) -#endif /* STM32F767xx || STM32F769xx || STM32F777xx || STM32F779xx */ - -#define __HAL_RCC_SPI2_CLK_ENABLE() do { \ - __IO uint32_t tmpreg; \ - SET_BIT(RCC->APB1ENR, RCC_APB1ENR_SPI2EN);\ - /* Delay after an RCC peripheral clock enabling */ \ - tmpreg = READ_BIT(RCC->APB1ENR, RCC_APB1ENR_SPI2EN);\ - UNUSED(tmpreg); \ - } while(0) - -#define __HAL_RCC_SPI3_CLK_ENABLE() do { \ - __IO uint32_t tmpreg; \ - SET_BIT(RCC->APB1ENR, RCC_APB1ENR_SPI3EN);\ - /* Delay after an RCC peripheral clock enabling */ \ - tmpreg = READ_BIT(RCC->APB1ENR, RCC_APB1ENR_SPI3EN);\ - UNUSED(tmpreg); \ - } while(0) - -#define __HAL_RCC_USART2_CLK_ENABLE() do { \ - __IO uint32_t tmpreg; \ - SET_BIT(RCC->APB1ENR, RCC_APB1ENR_USART2EN);\ - /* Delay after an RCC peripheral clock enabling */ \ - tmpreg = READ_BIT(RCC->APB1ENR, RCC_APB1ENR_USART2EN);\ - UNUSED(tmpreg); \ - } while(0) - -#define __HAL_RCC_USART3_CLK_ENABLE() do { \ - __IO uint32_t tmpreg; \ - SET_BIT(RCC->APB1ENR, RCC_APB1ENR_USART3EN);\ - /* Delay after an RCC peripheral clock enabling */ \ - tmpreg = READ_BIT(RCC->APB1ENR, RCC_APB1ENR_USART3EN);\ - UNUSED(tmpreg); \ - } while(0) - -#define __HAL_RCC_UART4_CLK_ENABLE() do { \ - __IO uint32_t tmpreg; \ - SET_BIT(RCC->APB1ENR, RCC_APB1ENR_UART4EN);\ - /* Delay after an RCC peripheral clock enabling */ \ - tmpreg = READ_BIT(RCC->APB1ENR, RCC_APB1ENR_UART4EN);\ - UNUSED(tmpreg); \ - } while(0) - -#define __HAL_RCC_UART5_CLK_ENABLE() do { \ - __IO uint32_t tmpreg; \ - SET_BIT(RCC->APB1ENR, RCC_APB1ENR_UART5EN);\ - /* Delay after an RCC peripheral clock enabling */ \ - tmpreg = READ_BIT(RCC->APB1ENR, RCC_APB1ENR_UART5EN);\ - UNUSED(tmpreg); \ - } while(0) - -#define __HAL_RCC_I2C1_CLK_ENABLE() do { \ - __IO uint32_t tmpreg; \ - SET_BIT(RCC->APB1ENR, RCC_APB1ENR_I2C1EN);\ - /* Delay after an RCC peripheral clock enabling */ \ - tmpreg = READ_BIT(RCC->APB1ENR, RCC_APB1ENR_I2C1EN);\ - UNUSED(tmpreg); \ - } while(0) - -#define __HAL_RCC_I2C2_CLK_ENABLE() do { \ - __IO uint32_t tmpreg; \ - SET_BIT(RCC->APB1ENR, RCC_APB1ENR_I2C2EN);\ - /* Delay after an RCC peripheral clock enabling */ \ - tmpreg = READ_BIT(RCC->APB1ENR, RCC_APB1ENR_I2C2EN);\ - UNUSED(tmpreg); \ - } while(0) - -#define __HAL_RCC_I2C3_CLK_ENABLE() do { \ - __IO uint32_t tmpreg; \ - SET_BIT(RCC->APB1ENR, RCC_APB1ENR_I2C3EN);\ - /* Delay after an RCC peripheral clock enabling */ \ - tmpreg = READ_BIT(RCC->APB1ENR, RCC_APB1ENR_I2C3EN);\ - UNUSED(tmpreg); \ - } while(0) - -#define __HAL_RCC_CAN1_CLK_ENABLE() do { \ - __IO uint32_t tmpreg; \ - SET_BIT(RCC->APB1ENR, RCC_APB1ENR_CAN1EN);\ - /* Delay after an RCC peripheral clock enabling */ \ - tmpreg = READ_BIT(RCC->APB1ENR, RCC_APB1ENR_CAN1EN);\ - UNUSED(tmpreg); \ - } while(0) - -#define __HAL_RCC_DAC_CLK_ENABLE() do { \ - __IO uint32_t tmpreg; \ - SET_BIT(RCC->APB1ENR, RCC_APB1ENR_DACEN);\ - /* Delay after an RCC peripheral clock enabling */ \ - tmpreg = READ_BIT(RCC->APB1ENR, RCC_APB1ENR_DACEN);\ - UNUSED(tmpreg); \ - } while(0) - -#define __HAL_RCC_UART7_CLK_ENABLE() do { \ - __IO uint32_t tmpreg; \ - SET_BIT(RCC->APB1ENR, RCC_APB1ENR_UART7EN);\ - /* Delay after an RCC peripheral clock enabling */ \ - tmpreg = READ_BIT(RCC->APB1ENR, RCC_APB1ENR_UART7EN);\ - UNUSED(tmpreg); \ - } while(0) - -#define __HAL_RCC_UART8_CLK_ENABLE() do { \ - __IO uint32_t tmpreg; \ - SET_BIT(RCC->APB1ENR, RCC_APB1ENR_UART8EN);\ - /* Delay after an RCC peripheral clock enabling */ \ - tmpreg = READ_BIT(RCC->APB1ENR, RCC_APB1ENR_UART8EN);\ - UNUSED(tmpreg); \ - } while(0) - -#if defined (STM32F745xx) || defined (STM32F746xx) || defined (STM32F756xx) || defined (STM32F765xx) ||\ - defined (STM32F767xx) || defined (STM32F769xx) || defined (STM32F777xx) || defined (STM32F779xx) ||\ - defined (STM32F750xx) -#define __HAL_RCC_SPDIFRX_CLK_ENABLE() do { \ - __IO uint32_t tmpreg; \ - SET_BIT(RCC->APB1ENR, RCC_APB1ENR_SPDIFRXEN);\ - /* Delay after an RCC peripheral clock enabling */ \ - tmpreg = READ_BIT(RCC->APB1ENR, RCC_APB1ENR_SPDIFRXEN);\ - UNUSED(tmpreg); \ - } while(0) - -#define __HAL_RCC_I2C4_CLK_ENABLE() do { \ - __IO uint32_t tmpreg; \ - SET_BIT(RCC->APB1ENR, RCC_APB1ENR_I2C4EN);\ - /* Delay after an RCC peripheral clock enabling */ \ - tmpreg = READ_BIT(RCC->APB1ENR, RCC_APB1ENR_I2C4EN);\ - UNUSED(tmpreg); \ - } while(0) - -#define __HAL_RCC_CAN2_CLK_ENABLE() do { \ - __IO uint32_t tmpreg; \ - SET_BIT(RCC->APB1ENR, RCC_APB1ENR_CAN2EN);\ - /* Delay after an RCC peripheral clock enabling */ \ - tmpreg = READ_BIT(RCC->APB1ENR, RCC_APB1ENR_CAN2EN);\ - UNUSED(tmpreg); \ - } while(0) - -#define __HAL_RCC_CEC_CLK_ENABLE() do { \ - __IO uint32_t tmpreg; \ - SET_BIT(RCC->APB1ENR, RCC_APB1ENR_CECEN);\ - /* Delay after an RCC peripheral clock enabling */ \ - tmpreg = READ_BIT(RCC->APB1ENR, RCC_APB1ENR_CECEN);\ - UNUSED(tmpreg); \ - } while(0) -#endif /* STM32F745xx || STM32F746xx || STM32F756xx || STM32F765xx || STM32F767xx || STM32F769xx || STM32F777xx || STM32F779xx || STM32F750xx */ - -#define __HAL_RCC_TIM2_CLK_DISABLE() (RCC->APB1ENR &= ~(RCC_APB1ENR_TIM2EN)) -#define __HAL_RCC_TIM3_CLK_DISABLE() (RCC->APB1ENR &= ~(RCC_APB1ENR_TIM3EN)) -#define __HAL_RCC_TIM4_CLK_DISABLE() (RCC->APB1ENR &= ~(RCC_APB1ENR_TIM4EN)) -#define __HAL_RCC_TIM5_CLK_DISABLE() (RCC->APB1ENR &= ~(RCC_APB1ENR_TIM5EN)) -#define __HAL_RCC_TIM6_CLK_DISABLE() (RCC->APB1ENR &= ~(RCC_APB1ENR_TIM6EN)) -#define __HAL_RCC_TIM7_CLK_DISABLE() (RCC->APB1ENR &= ~(RCC_APB1ENR_TIM7EN)) -#define __HAL_RCC_TIM12_CLK_DISABLE() (RCC->APB1ENR &= ~(RCC_APB1ENR_TIM12EN)) -#define __HAL_RCC_TIM13_CLK_DISABLE() (RCC->APB1ENR &= ~(RCC_APB1ENR_TIM13EN)) -#define __HAL_RCC_TIM14_CLK_DISABLE() (RCC->APB1ENR &= ~(RCC_APB1ENR_TIM14EN)) -#define __HAL_RCC_LPTIM1_CLK_DISABLE() (RCC->APB1ENR &= ~(RCC_APB1ENR_LPTIM1EN)) -#if defined (STM32F722xx) || defined (STM32F723xx) || defined (STM32F732xx) || defined (STM32F733xx) ||\ - defined (STM32F765xx) || defined (STM32F767xx) || defined (STM32F769xx) || defined (STM32F777xx) ||\ - defined (STM32F779xx) || defined (STM32F730xx) -#define __HAL_RCC_RTC_CLK_DISABLE() (RCC->APB1ENR &= ~(RCC_APB1ENR_RTCEN)) -#endif /* STM32F722xx || STM32F723xx || STM32F732xx || STM32F733xx || STM32F765xx || STM32F767xx || - STM32F769xx || STM32F777xx || STM32F779xx || STM32F730xx */ -#if defined (STM32F765xx) || defined (STM32F767xx) || defined (STM32F769xx) || defined (STM32F777xx) || defined (STM32F779xx) -#define __HAL_RCC_CAN3_CLK_DISABLE() (RCC->APB1ENR &= ~(RCC_APB1ENR_CAN3EN)) -#endif /* STM32F767xx || STM32F769xx || STM32F777xx || STM32F779xx */ -#define __HAL_RCC_SPI2_CLK_DISABLE() (RCC->APB1ENR &= ~(RCC_APB1ENR_SPI2EN)) -#define __HAL_RCC_SPI3_CLK_DISABLE() (RCC->APB1ENR &= ~(RCC_APB1ENR_SPI3EN)) -#define __HAL_RCC_USART2_CLK_DISABLE() (RCC->APB1ENR &= ~(RCC_APB1ENR_USART2EN)) -#define __HAL_RCC_USART3_CLK_DISABLE() (RCC->APB1ENR &= ~(RCC_APB1ENR_USART3EN)) -#define __HAL_RCC_UART4_CLK_DISABLE() (RCC->APB1ENR &= ~(RCC_APB1ENR_UART4EN)) -#define __HAL_RCC_UART5_CLK_DISABLE() (RCC->APB1ENR &= ~(RCC_APB1ENR_UART5EN)) -#define __HAL_RCC_I2C1_CLK_DISABLE() (RCC->APB1ENR &= ~(RCC_APB1ENR_I2C1EN)) -#define __HAL_RCC_I2C2_CLK_DISABLE() (RCC->APB1ENR &= ~(RCC_APB1ENR_I2C2EN)) -#define __HAL_RCC_I2C3_CLK_DISABLE() (RCC->APB1ENR &= ~(RCC_APB1ENR_I2C3EN)) -#define __HAL_RCC_CAN1_CLK_DISABLE() (RCC->APB1ENR &= ~(RCC_APB1ENR_CAN1EN)) -#define __HAL_RCC_DAC_CLK_DISABLE() (RCC->APB1ENR &= ~(RCC_APB1ENR_DACEN)) -#define __HAL_RCC_UART7_CLK_DISABLE() (RCC->APB1ENR &= ~(RCC_APB1ENR_UART7EN)) -#define __HAL_RCC_UART8_CLK_DISABLE() (RCC->APB1ENR &= ~(RCC_APB1ENR_UART8EN)) -#if defined (STM32F745xx) || defined (STM32F746xx) || defined (STM32F756xx) || defined (STM32F765xx) ||\ - defined (STM32F767xx) || defined (STM32F769xx) || defined (STM32F777xx) || defined (STM32F779xx) ||\ - defined (STM32F750xx) -#define __HAL_RCC_SPDIFRX_CLK_DISABLE()(RCC->APB1ENR &= ~(RCC_APB1ENR_SPDIFRXEN)) -#define __HAL_RCC_I2C4_CLK_DISABLE() (RCC->APB1ENR &= ~(RCC_APB1ENR_I2C4EN)) -#define __HAL_RCC_CAN2_CLK_DISABLE() (RCC->APB1ENR &= ~(RCC_APB1ENR_CAN2EN)) -#define __HAL_RCC_CEC_CLK_DISABLE() (RCC->APB1ENR &= ~(RCC_APB1ENR_CECEN)) -#endif /* STM32F745xx || STM32F746xx || STM32F756xx || STM32F765xx || STM32F767xx || STM32F769xx || STM32F777xx || STM32F779xx || || STM32F750xx */ - -/** @brief Enable or disable the High Speed APB (APB2) peripheral clock. - * @note After reset, the peripheral clock (used for registers read/write access) - * is disabled and the application software has to enable this clock before - * using it. - */ -#define __HAL_RCC_TIM1_CLK_ENABLE() do { \ - __IO uint32_t tmpreg; \ - SET_BIT(RCC->APB2ENR, RCC_APB2ENR_TIM1EN);\ - /* Delay after an RCC peripheral clock enabling */ \ - tmpreg = READ_BIT(RCC->APB2ENR, RCC_APB2ENR_TIM1EN);\ - UNUSED(tmpreg); \ - } while(0) - -#define __HAL_RCC_TIM8_CLK_ENABLE() do { \ - __IO uint32_t tmpreg; \ - SET_BIT(RCC->APB2ENR, RCC_APB2ENR_TIM8EN);\ - /* Delay after an RCC peripheral clock enabling */ \ - tmpreg = READ_BIT(RCC->APB2ENR, RCC_APB2ENR_TIM8EN);\ - UNUSED(tmpreg); \ - } while(0) - -#define __HAL_RCC_USART1_CLK_ENABLE() do { \ - __IO uint32_t tmpreg; \ - SET_BIT(RCC->APB2ENR, RCC_APB2ENR_USART1EN);\ - /* Delay after an RCC peripheral clock enabling */ \ - tmpreg = READ_BIT(RCC->APB2ENR, RCC_APB2ENR_USART1EN);\ - UNUSED(tmpreg); \ - } while(0) - -#define __HAL_RCC_USART6_CLK_ENABLE() do { \ - __IO uint32_t tmpreg; \ - SET_BIT(RCC->APB2ENR, RCC_APB2ENR_USART6EN);\ - /* Delay after an RCC peripheral clock enabling */ \ - tmpreg = READ_BIT(RCC->APB2ENR, RCC_APB2ENR_USART6EN);\ - UNUSED(tmpreg); \ - } while(0) - -#if defined (STM32F722xx) || defined (STM32F723xx) || defined (STM32F732xx) || defined (STM32F733xx) || defined (STM32F765xx) ||\ - defined (STM32F767xx) || defined (STM32F769xx) || defined (STM32F777xx) || defined (STM32F779xx) || defined (STM32F730xx) -#define __HAL_RCC_SDMMC2_CLK_ENABLE() do { \ - __IO uint32_t tmpreg; \ - SET_BIT(RCC->APB2ENR, RCC_APB2ENR_SDMMC2EN);\ - /* Delay after an RCC peripheral clock enabling */ \ - tmpreg = READ_BIT(RCC->APB2ENR, RCC_APB2ENR_SDMMC2EN);\ - UNUSED(tmpreg); \ - } while(0) -#endif /* STM32F722xx || STM32F723xx || STM32F732xx || STM32F733xx || STM32F767xx || STM32F769xx || STM32F777xx || STM32F779xx || || STM32F730xx */ - -#define __HAL_RCC_ADC1_CLK_ENABLE() do { \ - __IO uint32_t tmpreg; \ - SET_BIT(RCC->APB2ENR, RCC_APB2ENR_ADC1EN);\ - /* Delay after an RCC peripheral clock enabling */ \ - tmpreg = READ_BIT(RCC->APB2ENR, RCC_APB2ENR_ADC1EN);\ - UNUSED(tmpreg); \ - } while(0) - -#define __HAL_RCC_ADC2_CLK_ENABLE() do { \ - __IO uint32_t tmpreg; \ - SET_BIT(RCC->APB2ENR, RCC_APB2ENR_ADC2EN);\ - /* Delay after an RCC peripheral clock enabling */ \ - tmpreg = READ_BIT(RCC->APB2ENR, RCC_APB2ENR_ADC2EN);\ - UNUSED(tmpreg); \ - } while(0) - -#define __HAL_RCC_ADC3_CLK_ENABLE() do { \ - __IO uint32_t tmpreg; \ - SET_BIT(RCC->APB2ENR, RCC_APB2ENR_ADC3EN);\ - /* Delay after an RCC peripheral clock enabling */ \ - tmpreg = READ_BIT(RCC->APB2ENR, RCC_APB2ENR_ADC3EN);\ - UNUSED(tmpreg); \ - } while(0) - -#define __HAL_RCC_SDMMC1_CLK_ENABLE() do { \ - __IO uint32_t tmpreg; \ - SET_BIT(RCC->APB2ENR, RCC_APB2ENR_SDMMC1EN);\ - /* Delay after an RCC peripheral clock enabling */ \ - tmpreg = READ_BIT(RCC->APB2ENR, RCC_APB2ENR_SDMMC1EN);\ - UNUSED(tmpreg); \ - } while(0) - -#define __HAL_RCC_SPI1_CLK_ENABLE() do { \ - __IO uint32_t tmpreg; \ - SET_BIT(RCC->APB2ENR, RCC_APB2ENR_SPI1EN);\ - /* Delay after an RCC peripheral clock enabling */ \ - tmpreg = READ_BIT(RCC->APB2ENR, RCC_APB2ENR_SPI1EN);\ - UNUSED(tmpreg); \ - } while(0) - -#define __HAL_RCC_SPI4_CLK_ENABLE() do { \ - __IO uint32_t tmpreg; \ - SET_BIT(RCC->APB2ENR, RCC_APB2ENR_SPI4EN);\ - /* Delay after an RCC peripheral clock enabling */ \ - tmpreg = READ_BIT(RCC->APB2ENR, RCC_APB2ENR_SPI4EN);\ - UNUSED(tmpreg); \ - } while(0) - -#define __HAL_RCC_TIM9_CLK_ENABLE() do { \ - __IO uint32_t tmpreg; \ - SET_BIT(RCC->APB2ENR, RCC_APB2ENR_TIM9EN);\ - /* Delay after an RCC peripheral clock enabling */ \ - tmpreg = READ_BIT(RCC->APB2ENR, RCC_APB2ENR_TIM9EN);\ - UNUSED(tmpreg); \ - } while(0) - -#define __HAL_RCC_TIM10_CLK_ENABLE() do { \ - __IO uint32_t tmpreg; \ - SET_BIT(RCC->APB2ENR, RCC_APB2ENR_TIM10EN);\ - /* Delay after an RCC peripheral clock enabling */ \ - tmpreg = READ_BIT(RCC->APB2ENR, RCC_APB2ENR_TIM10EN);\ - UNUSED(tmpreg); \ - } while(0) - -#define __HAL_RCC_TIM11_CLK_ENABLE() do { \ - __IO uint32_t tmpreg; \ - SET_BIT(RCC->APB2ENR, RCC_APB2ENR_TIM11EN);\ - /* Delay after an RCC peripheral clock enabling */ \ - tmpreg = READ_BIT(RCC->APB2ENR, RCC_APB2ENR_TIM11EN);\ - UNUSED(tmpreg); \ - } while(0) - -#define __HAL_RCC_SPI5_CLK_ENABLE() do { \ - __IO uint32_t tmpreg; \ - SET_BIT(RCC->APB2ENR, RCC_APB2ENR_SPI5EN);\ - /* Delay after an RCC peripheral clock enabling */ \ - tmpreg = READ_BIT(RCC->APB2ENR, RCC_APB2ENR_SPI5EN);\ - UNUSED(tmpreg); \ - } while(0) - -#define __HAL_RCC_SPI6_CLK_ENABLE() do { \ - __IO uint32_t tmpreg; \ - SET_BIT(RCC->APB2ENR, RCC_APB2ENR_SPI6EN);\ - /* Delay after an RCC peripheral clock enabling */ \ - tmpreg = READ_BIT(RCC->APB2ENR, RCC_APB2ENR_SPI6EN);\ - UNUSED(tmpreg); \ - } while(0) - -#define __HAL_RCC_SAI1_CLK_ENABLE() do { \ - __IO uint32_t tmpreg; \ - SET_BIT(RCC->APB2ENR, RCC_APB2ENR_SAI1EN);\ - /* Delay after an RCC peripheral clock enabling */ \ - tmpreg = READ_BIT(RCC->APB2ENR, RCC_APB2ENR_SAI1EN);\ - UNUSED(tmpreg); \ - } while(0) - -#define __HAL_RCC_SAI2_CLK_ENABLE() do { \ - __IO uint32_t tmpreg; \ - SET_BIT(RCC->APB2ENR, RCC_APB2ENR_SAI2EN);\ - /* Delay after an RCC peripheral clock enabling */ \ - tmpreg = READ_BIT(RCC->APB2ENR, RCC_APB2ENR_SAI2EN);\ - UNUSED(tmpreg); \ - } while(0) - -#if defined (STM32F746xx) || defined (STM32F756xx) || defined (STM32F767xx) || defined (STM32F769xx) || defined (STM32F777xx) || defined (STM32F779xx) || defined (STM32F750xx) -#define __HAL_RCC_LTDC_CLK_ENABLE() do { \ - __IO uint32_t tmpreg; \ - SET_BIT(RCC->APB2ENR, RCC_APB2ENR_LTDCEN);\ - /* Delay after an RCC peripheral clock enabling */ \ - tmpreg = READ_BIT(RCC->APB2ENR, RCC_APB2ENR_LTDCEN);\ - UNUSED(tmpreg); \ - } while(0) -#endif /* STM32F746xx || STM32F756xx || STM32F767xx || STM32F769xx || STM32F777xx || STM32F779xx || STM32F750xx */ - -#if defined (STM32F769xx) || defined (STM32F779xx) -#define __HAL_RCC_DSI_CLK_ENABLE() do { \ - __IO uint32_t tmpreg; \ - SET_BIT(RCC->APB2ENR, RCC_APB2ENR_DSIEN);\ - /* Delay after an RCC peripheral clock enabling */ \ - tmpreg = READ_BIT(RCC->APB2ENR, RCC_APB2ENR_DSIEN);\ - UNUSED(tmpreg); \ - } while(0) -#endif /* STM32F769xx || STM32F779xx */ - -#if defined (STM32F765xx) || defined (STM32F767xx) || defined (STM32F769xx) || defined (STM32F777xx) || defined (STM32F779xx) -#define __HAL_RCC_DFSDM1_CLK_ENABLE() do { \ - __IO uint32_t tmpreg; \ - SET_BIT(RCC->APB2ENR, RCC_APB2ENR_DFSDM1EN);\ - /* Delay after an RCC peripheral clock enabling */ \ - tmpreg = READ_BIT(RCC->APB2ENR, RCC_APB2ENR_DFSDM1EN);\ - UNUSED(tmpreg); \ - } while(0) - -#define __HAL_RCC_MDIO_CLK_ENABLE() do { \ - __IO uint32_t tmpreg; \ - SET_BIT(RCC->APB2ENR, RCC_APB2ENR_MDIOEN);\ - /* Delay after an RCC peripheral clock enabling */ \ - tmpreg = READ_BIT(RCC->APB2ENR, RCC_APB2ENR_MDIOEN);\ - UNUSED(tmpreg); \ - } while(0) -#endif /* STM32F767xx || STM32F769xx || STM32F777xx || STM32F779xx */ -#if defined (STM32F723xx) || defined (STM32F733xx) || defined (STM32F730xx) -#define __HAL_RCC_OTGPHYC_CLK_ENABLE() do { \ - __IO uint32_t tmpreg; \ - SET_BIT(RCC->APB2ENR, RCC_APB2ENR_OTGPHYCEN);\ - /* Delay after an RCC peripheral clock enabling */ \ - tmpreg = READ_BIT(RCC->APB2ENR, RCC_APB2ENR_OTGPHYCEN);\ - UNUSED(tmpreg); \ - } while(0) -#endif /* STM32F723xx || STM32F733xx || STM32F730xx */ - -#define __HAL_RCC_TIM1_CLK_DISABLE() (RCC->APB2ENR &= ~(RCC_APB2ENR_TIM1EN)) -#define __HAL_RCC_TIM8_CLK_DISABLE() (RCC->APB2ENR &= ~(RCC_APB2ENR_TIM8EN)) -#define __HAL_RCC_USART1_CLK_DISABLE() (RCC->APB2ENR &= ~(RCC_APB2ENR_USART1EN)) -#define __HAL_RCC_USART6_CLK_DISABLE() (RCC->APB2ENR &= ~(RCC_APB2ENR_USART6EN)) -#if defined (STM32F722xx) || defined (STM32F723xx) || defined (STM32F732xx) || defined (STM32F733xx) || defined (STM32F765xx) ||\ - defined (STM32F767xx) || defined (STM32F769xx) || defined (STM32F777xx) || defined (STM32F779xx) || defined (STM32F730xx) -#define __HAL_RCC_SDMMC2_CLK_DISABLE() (RCC->APB2ENR &= ~(RCC_APB2ENR_SDMMC2EN)) -#endif /* STM32F722xx || STM32F723xx || STM32F732xx || STM32F733xx || STM32F765xx || STM32F767xx || STM32F769xx || STM32F777xx || STM32F779xx || STM32F730xx */ -#define __HAL_RCC_ADC1_CLK_DISABLE() (RCC->APB2ENR &= ~(RCC_APB2ENR_ADC1EN)) -#define __HAL_RCC_ADC2_CLK_DISABLE() (RCC->APB2ENR &= ~(RCC_APB2ENR_ADC2EN)) -#define __HAL_RCC_ADC3_CLK_DISABLE() (RCC->APB2ENR &= ~(RCC_APB2ENR_ADC3EN)) -#define __HAL_RCC_SDMMC1_CLK_DISABLE() (RCC->APB2ENR &= ~(RCC_APB2ENR_SDMMC1EN)) -#define __HAL_RCC_SPI1_CLK_DISABLE() (RCC->APB2ENR &= ~(RCC_APB2ENR_SPI1EN)) -#define __HAL_RCC_SPI4_CLK_DISABLE() (RCC->APB2ENR &= ~(RCC_APB2ENR_SPI4EN)) -#define __HAL_RCC_TIM9_CLK_DISABLE() (RCC->APB2ENR &= ~(RCC_APB2ENR_TIM9EN)) -#define __HAL_RCC_TIM10_CLK_DISABLE() (RCC->APB2ENR &= ~(RCC_APB2ENR_TIM10EN)) -#define __HAL_RCC_TIM11_CLK_DISABLE() (RCC->APB2ENR &= ~(RCC_APB2ENR_TIM11EN)) -#define __HAL_RCC_SPI5_CLK_DISABLE() (RCC->APB2ENR &= ~(RCC_APB2ENR_SPI5EN)) -#define __HAL_RCC_SPI6_CLK_DISABLE() (RCC->APB2ENR &= ~(RCC_APB2ENR_SPI6EN)) -#define __HAL_RCC_SAI1_CLK_DISABLE() (RCC->APB2ENR &= ~(RCC_APB2ENR_SAI1EN)) -#define __HAL_RCC_SAI2_CLK_DISABLE() (RCC->APB2ENR &= ~(RCC_APB2ENR_SAI2EN)) -#if defined (STM32F746xx) || defined (STM32F756xx) || defined (STM32F767xx) || defined (STM32F769xx) || defined (STM32F777xx) || defined (STM32F779xx) || defined (STM32F750xx) -#define __HAL_RCC_LTDC_CLK_DISABLE() (RCC->APB2ENR &= ~(RCC_APB2ENR_LTDCEN)) -#endif /* STM32F746xx || STM32F756xx || STM32F767xx || STM32F769xx || STM32F777xx || STM32F779xx || STM32F750xx */ -#if defined (STM32F769xx) || defined (STM32F779xx) -#define __HAL_RCC_DSI_CLK_DISABLE() (RCC->APB2ENR &= ~(RCC_APB2ENR_DSIEN)) -#endif /* STM32F769xx || STM32F779xx */ -#if defined (STM32F765xx) || defined (STM32F767xx) || defined (STM32F769xx) || defined (STM32F777xx) || defined (STM32F779xx) -#define __HAL_RCC_DFSDM1_CLK_DISABLE() (RCC->APB2ENR &= ~(RCC_APB2ENR_DFSDM1EN)) -#define __HAL_RCC_MDIO_CLK_DISABLE() (RCC->APB2ENR &= ~(RCC_APB2ENR_MDIOEN)) -#endif /* STM32F767xx || STM32F769xx || STM32F777xx || STM32F779xx */ -#if defined (STM32F723xx) || defined (STM32F733xx) || defined (STM32F730xx) -#define __HAL_RCC_OTGPHYC_CLK_DISABLE() (RCC->APB2ENR &= ~(RCC_APB2ENR_OTGPHYCEN)) -#endif /* STM32F723xx || STM32F733xx || STM32F730xx */ - -/** - * @} - */ - -/** @defgroup RCCEx_Peripheral_Clock_Enable_Disable_Status Peripheral Clock Enable Disable Status - * @brief Get the enable or disable status of the AHB/APB peripheral clock. - * @note After reset, the peripheral clock (used for registers read/write access) - * is disabled and the application software has to enable this clock before - * using it. - * @{ - */ - -/** @brief Get the enable or disable status of the AHB1 peripheral clock. - * @note After reset, the peripheral clock (used for registers read/write access) - * is disabled and the application software has to enable this clock before - * using it. - */ -#define __HAL_RCC_BKPSRAM_IS_CLK_ENABLED() ((RCC->AHB1ENR & (RCC_AHB1ENR_BKPSRAMEN)) != RESET) -#define __HAL_RCC_DTCMRAMEN_IS_CLK_ENABLED() ((RCC->AHB1ENR & (RCC_AHB1ENR_DTCMRAMEN)) != RESET) -#define __HAL_RCC_DMA2_IS_CLK_ENABLED() ((RCC->AHB1ENR & (RCC_AHB1ENR_DMA2EN)) != RESET) -#define __HAL_RCC_USB_OTG_HS_IS_CLK_ENABLED() ((RCC->AHB1ENR & (RCC_AHB1ENR_OTGHSEN)) != RESET) -#define __HAL_RCC_USB_OTG_HS_ULPI_IS_CLK_ENABLED() ((RCC->AHB1ENR & (RCC_AHB1ENR_OTGHSULPIEN)) != RESET) -#define __HAL_RCC_GPIOA_IS_CLK_ENABLED() ((RCC->AHB1ENR & (RCC_AHB1ENR_GPIOAEN)) != RESET) -#define __HAL_RCC_GPIOB_IS_CLK_ENABLED() ((RCC->AHB1ENR & (RCC_AHB1ENR_GPIOBEN)) != RESET) -#define __HAL_RCC_GPIOC_IS_CLK_ENABLED() ((RCC->AHB1ENR & (RCC_AHB1ENR_GPIOCEN)) != RESET) -#define __HAL_RCC_GPIOD_IS_CLK_ENABLED() ((RCC->AHB1ENR & (RCC_AHB1ENR_GPIODEN)) != RESET) -#define __HAL_RCC_GPIOE_IS_CLK_ENABLED() ((RCC->AHB1ENR & (RCC_AHB1ENR_GPIOEEN)) != RESET) -#define __HAL_RCC_GPIOF_IS_CLK_ENABLED() ((RCC->AHB1ENR & (RCC_AHB1ENR_GPIOFEN)) != RESET) -#define __HAL_RCC_GPIOG_IS_CLK_ENABLED() ((RCC->AHB1ENR & (RCC_AHB1ENR_GPIOGEN)) != RESET) -#define __HAL_RCC_GPIOH_IS_CLK_ENABLED() ((RCC->AHB1ENR & (RCC_AHB1ENR_GPIOHEN)) != RESET) -#define __HAL_RCC_GPIOI_IS_CLK_ENABLED() ((RCC->AHB1ENR & (RCC_AHB1ENR_GPIOIEN)) != RESET) -#if defined (STM32F745xx) || defined (STM32F746xx) || defined (STM32F756xx) || defined (STM32F765xx) ||\ - defined (STM32F767xx) || defined (STM32F769xx) || defined (STM32F777xx) || defined (STM32F779xx) ||\ - defined (STM32F750xx) -#define __HAL_RCC_GPIOJ_IS_CLK_ENABLED() ((RCC->AHB1ENR & (RCC_AHB1ENR_GPIOJEN)) != RESET) -#define __HAL_RCC_GPIOK_IS_CLK_ENABLED() ((RCC->AHB1ENR & (RCC_AHB1ENR_GPIOKEN)) != RESET) -#define __HAL_RCC_DMA2D_IS_CLK_ENABLED() ((RCC->AHB1ENR & (RCC_AHB1ENR_DMA2DEN)) != RESET) -#endif /* STM32F745xx || STM32F746xx || STM32F756xx || STM32F765xx || STM32F767xx || STM32F769xx || STM32F777xx || STM32F779xx || STM32F750xx */ - -#define __HAL_RCC_BKPSRAM_IS_CLK_DISABLED() ((RCC->AHB1ENR & (RCC_AHB1ENR_BKPSRAMEN)) == RESET) -#define __HAL_RCC_DTCMRAMEN_IS_CLK_DISABLED() ((RCC->AHB1ENR & (RCC_AHB1ENR_DTCMRAMEN)) == RESET) -#define __HAL_RCC_DMA2_IS_CLK_DISABLED() ((RCC->AHB1ENR & (RCC_AHB1ENR_DMA2EN)) == RESET) -#define __HAL_RCC_USB_OTG_HS_IS_CLK_DISABLED() ((RCC->AHB1ENR & (RCC_AHB1ENR_OTGHSEN)) == RESET) -#define __HAL_RCC_USB_OTG_HS_ULPI_IS_CLK_DISABLED() ((RCC->AHB1ENR & (RCC_AHB1ENR_OTGHSULPIEN)) == RESET) -#define __HAL_RCC_GPIOA_IS_CLK_DISABLED() ((RCC->AHB1ENR & (RCC_AHB1ENR_GPIOAEN)) == RESET) -#define __HAL_RCC_GPIOB_IS_CLK_DISABLED() ((RCC->AHB1ENR & (RCC_AHB1ENR_GPIOBEN)) == RESET) -#define __HAL_RCC_GPIOC_IS_CLK_DISABLED() ((RCC->AHB1ENR & (RCC_AHB1ENR_GPIOCEN)) == RESET) -#define __HAL_RCC_GPIOD_IS_CLK_DISABLED() ((RCC->AHB1ENR & (RCC_AHB1ENR_GPIODEN)) == RESET) -#define __HAL_RCC_GPIOE_IS_CLK_DISABLED() ((RCC->AHB1ENR & (RCC_AHB1ENR_GPIOEEN)) == RESET) -#define __HAL_RCC_GPIOF_IS_CLK_DISABLED() ((RCC->AHB1ENR & (RCC_AHB1ENR_GPIOFEN)) == RESET) -#define __HAL_RCC_GPIOG_IS_CLK_DISABLED() ((RCC->AHB1ENR & (RCC_AHB1ENR_GPIOGEN)) == RESET) -#define __HAL_RCC_GPIOH_IS_CLK_DISABLED() ((RCC->AHB1ENR & (RCC_AHB1ENR_GPIOHEN)) == RESET) -#define __HAL_RCC_GPIOI_IS_CLK_DISABLED() ((RCC->AHB1ENR & (RCC_AHB1ENR_GPIOIEN)) == RESET) -#if defined (STM32F745xx) || defined (STM32F746xx) || defined (STM32F756xx) || defined (STM32F765xx) ||\ - defined (STM32F767xx) || defined (STM32F769xx) || defined (STM32F777xx) || defined (STM32F779xx) ||\ - defined (STM32F750xx) -#define __HAL_RCC_GPIOJ_IS_CLK_DISABLED() ((RCC->AHB1ENR & (RCC_AHB1ENR_GPIOJEN)) == RESET) -#define __HAL_RCC_GPIOK_IS_CLK_DISABLED() ((RCC->AHB1ENR & (RCC_AHB1ENR_GPIOKEN)) == RESET) -#define __HAL_RCC_DMA2D_IS_CLK_DISABLED() ((RCC->AHB1ENR & (RCC_AHB1ENR_DMA2DEN)) == RESET) -#endif /* STM32F745xx || STM32F746xx || STM32F756xx || STM32F765xx || STM32F767xx || STM32F769xx || STM32F777xx || STM32F779xx || STM32F750xx */ - -#if defined (STM32F745xx) || defined (STM32F746xx) || defined (STM32F756xx) || defined (STM32F765xx) ||\ - defined (STM32F767xx) || defined (STM32F769xx) || defined (STM32F777xx) || defined (STM32F779xx) ||\ - defined (STM32F750xx) -/** - * @brief Enable ETHERNET clock. - */ -#define __HAL_RCC_ETHMAC_IS_CLK_ENABLED() ((RCC->AHB1ENR & (RCC_AHB1ENR_ETHMACEN)) != RESET) -#define __HAL_RCC_ETHMACTX_IS_CLK_ENABLED() ((RCC->AHB1ENR & (RCC_AHB1ENR_ETHMACTXEN)) != RESET) -#define __HAL_RCC_ETHMACRX_IS_CLK_ENABLED() ((RCC->AHB1ENR & (RCC_AHB1ENR_ETHMACRXEN)) != RESET) -#define __HAL_RCC_ETHMACPTP_IS_CLK_ENABLED() ((RCC->AHB1ENR & (RCC_AHB1ENR_ETHMACPTPEN)) != RESET) -#define __HAL_RCC_ETH_IS_CLK_ENABLED() (__HAL_RCC_ETHMAC_IS_CLK_ENABLED() && \ - __HAL_RCC_ETHMACTX_IS_CLK_ENABLED() && \ - __HAL_RCC_ETHMACRX_IS_CLK_ENABLED()) - -/** - * @brief Disable ETHERNET clock. - */ -#define __HAL_RCC_ETHMAC_IS_CLK_DISABLED() ((RCC->AHB1ENR & (RCC_AHB1ENR_ETHMACEN)) == RESET) -#define __HAL_RCC_ETHMACTX_IS_CLK_DISABLED() ((RCC->AHB1ENR & (RCC_AHB1ENR_ETHMACTXEN)) == RESET) -#define __HAL_RCC_ETHMACRX_IS_CLK_DISABLED() ((RCC->AHB1ENR & (RCC_AHB1ENR_ETHMACRXEN)) == RESET) -#define __HAL_RCC_ETHMACPTP_IS_CLK_DISABLED() ((RCC->AHB1ENR & (RCC_AHB1ENR_ETHMACPTPEN)) == RESET) -#define __HAL_RCC_ETH_IS_CLK_DISABLED() (__HAL_RCC_ETHMAC_IS_CLK_DISABLED() && \ - __HAL_RCC_ETHMACTX_IS_CLK_DISABLED() && \ - __HAL_RCC_ETHMACRX_IS_CLK_DISABLED()) -#endif /* STM32F745xx || STM32F746xx || STM32F756xx || STM32F765xx || STM32F767xx || STM32F769xx || STM32F777xx || STM32F779xx || STM32F750xx */ - -/** @brief Get the enable or disable status of the AHB2 peripheral clock. - * @note After reset, the peripheral clock (used for registers read/write access) - * is disabled and the application software has to enable this clock before - * using it. - */ -#define __HAL_RCC_RNG_IS_CLK_ENABLED() ((RCC->AHB2ENR & (RCC_AHB2ENR_RNGEN)) != RESET) -#define __HAL_RCC_USB_OTG_FS_IS_CLK_ENABLED() ((RCC->AHB2ENR & (RCC_AHB2ENR_OTGFSEN)) != RESET) - -#define __HAL_RCC_RNG_IS_CLK_DISABLED() ((RCC->AHB2ENR & (RCC_AHB2ENR_RNGEN)) == RESET) -#define __HAL_RCC_USB_IS_OTG_FS_CLK_DISABLED() ((RCC->AHB2ENR & (RCC_AHB2ENR_OTGFSEN)) == RESET) - -#if defined(STM32F756xx) || defined (STM32F777xx) || defined (STM32F779xx) || defined (STM32F750xx) -#define __HAL_RCC_CRYP_IS_CLK_ENABLED() ((RCC->AHB2ENR & (RCC_AHB2ENR_CRYPEN)) != RESET) -#define __HAL_RCC_HASH_IS_CLK_ENABLED() ((RCC->AHB2ENR & (RCC_AHB2ENR_HASHEN)) != RESET) -#define __HAL_RCC_CRYP_IS_CLK_DISABLED() ((RCC->AHB2ENR & (RCC_AHB2ENR_CRYPEN)) == RESET) -#define __HAL_RCC_HASH_IS_CLK_DISABLED() ((RCC->AHB2ENR & (RCC_AHB2ENR_HASHEN)) == RESET) -#endif /* STM32F756xx || STM32F777xx || STM32F779xx || STM32F750xx */ - -#if defined(STM32F732xx) || defined (STM32F733xx) || defined (STM32F730xx) -#define __HAL_RCC_AES_IS_CLK_ENABLED() ((RCC->AHB2ENR & (RCC_AHB2ENR_AESEN)) != RESET) -#define __HAL_RCC_AES_IS_CLK_DISABLED() ((RCC->AHB2ENR & (RCC_AHB2ENR_AESEN)) == RESET) -#endif /* STM32F732xx || STM32F733xx || STM32F730xx */ - -#if defined (STM32F745xx) || defined (STM32F746xx) || defined (STM32F756xx) || defined (STM32F765xx) ||\ - defined (STM32F767xx) || defined (STM32F769xx) || defined (STM32F777xx) || defined (STM32F779xx) ||\ - defined (STM32F750xx) -#define __HAL_RCC_DCMI_IS_CLK_ENABLED() ((RCC->AHB2ENR & (RCC_AHB2ENR_DCMIEN)) != RESET) -#define __HAL_RCC_DCMI_IS_CLK_DISABLED() ((RCC->AHB2ENR & (RCC_AHB2ENR_DCMIEN)) == RESET) -#endif /* STM32F745xx || STM32F746xx || STM32F756xx || STM32F765xx || STM32F767xx || STM32F769xx || STM32F777xx || STM32F779xx || STM32F750xx */ - -#if defined (STM32F767xx) || defined (STM32F769xx) || defined (STM32F777xx) || defined (STM32F779xx) -#define __HAL_RCC_JPEG_IS_CLK_ENABLED() ((RCC->AHB2ENR & (RCC_AHB2ENR_JPEGEN)) != RESET) -#define __HAL_RCC_JPEG_IS_CLK_DISABLED() ((RCC->AHB2ENR & (RCC_AHB2ENR_JPEGEN)) == RESET) -#endif /* STM32F767xx || STM32F769xx || STM32F777xx || STM32F779xx */ - -/** @brief Get the enable or disable status of the AHB3 peripheral clock. - * @note After reset, the peripheral clock (used for registers read/write access) - * is disabled and the application software has to enable this clock before - * using it. - */ -#define __HAL_RCC_FMC_IS_CLK_ENABLED() ((RCC->AHB3ENR & (RCC_AHB3ENR_FMCEN)) != RESET) -#define __HAL_RCC_QSPI_IS_CLK_ENABLED() ((RCC->AHB3ENR & (RCC_AHB3ENR_QSPIEN)) != RESET) - -#define __HAL_RCC_FMC_IS_CLK_DISABLED() ((RCC->AHB3ENR & (RCC_AHB3ENR_FMCEN)) == RESET) -#define __HAL_RCC_QSPI_IS_CLK_DISABLED() ((RCC->AHB3ENR & (RCC_AHB3ENR_QSPIEN)) == RESET) - -/** @brief Get the enable or disable status of the APB1 peripheral clock. - * @note After reset, the peripheral clock (used for registers read/write access) - * is disabled and the application software has to enable this clock before - * using it. - */ -#define __HAL_RCC_TIM2_IS_CLK_ENABLED() ((RCC->APB1ENR & (RCC_APB1ENR_TIM2EN)) != RESET) -#define __HAL_RCC_TIM3_IS_CLK_ENABLED() ((RCC->APB1ENR & (RCC_APB1ENR_TIM3EN)) != RESET) -#define __HAL_RCC_TIM4_IS_CLK_ENABLED() ((RCC->APB1ENR & (RCC_APB1ENR_TIM4EN)) != RESET) -#define __HAL_RCC_TIM5_IS_CLK_ENABLED() ((RCC->APB1ENR & (RCC_APB1ENR_TIM5EN)) != RESET) -#define __HAL_RCC_TIM6_IS_CLK_ENABLED() ((RCC->APB1ENR & (RCC_APB1ENR_TIM6EN)) != RESET) -#define __HAL_RCC_TIM7_IS_CLK_ENABLED() ((RCC->APB1ENR & (RCC_APB1ENR_TIM7EN)) != RESET) -#define __HAL_RCC_TIM12_IS_CLK_ENABLED() ((RCC->APB1ENR & (RCC_APB1ENR_TIM12EN)) != RESET) -#define __HAL_RCC_TIM13_IS_CLK_ENABLED() ((RCC->APB1ENR & (RCC_APB1ENR_TIM13EN)) != RESET) -#define __HAL_RCC_TIM14_IS_CLK_ENABLED() ((RCC->APB1ENR & (RCC_APB1ENR_TIM14EN)) != RESET) -#define __HAL_RCC_LPTIM1_IS_CLK_ENABLED() ((RCC->APB1ENR & (RCC_APB1ENR_LPTIM1EN)) != RESET) -#if defined (STM32F765xx) || defined (STM32F767xx) || defined (STM32F769xx) || defined (STM32F777xx) || defined (STM32F779xx) -#define __HAL_RCC_CAN3_IS_CLK_ENABLED() ((RCC->APB1ENR & (RCC_APB1ENR_CAN3EN)) != RESET) -#endif /* STM32F767xx || STM32F769xx || STM32F777xx || STM32F779xx */ -#define __HAL_RCC_SPI2_IS_CLK_ENABLED() ((RCC->APB1ENR & (RCC_APB1ENR_SPI2EN)) != RESET) -#define __HAL_RCC_SPI3_IS_CLK_ENABLED() ((RCC->APB1ENR & (RCC_APB1ENR_SPI3EN)) != RESET) -#define __HAL_RCC_USART2_IS_CLK_ENABLED() ((RCC->APB1ENR & (RCC_APB1ENR_USART2EN)) != RESET) -#define __HAL_RCC_USART3_IS_CLK_ENABLED() ((RCC->APB1ENR & (RCC_APB1ENR_USART3EN)) != RESET) -#define __HAL_RCC_UART4_IS_CLK_ENABLED() ((RCC->APB1ENR & (RCC_APB1ENR_UART4EN)) != RESET) -#define __HAL_RCC_UART5_IS_CLK_ENABLED() ((RCC->APB1ENR & (RCC_APB1ENR_UART5EN)) != RESET) -#define __HAL_RCC_I2C1_IS_CLK_ENABLED() ((RCC->APB1ENR & (RCC_APB1ENR_I2C1EN)) != RESET) -#define __HAL_RCC_I2C2_IS_CLK_ENABLED() ((RCC->APB1ENR & (RCC_APB1ENR_I2C2EN)) != RESET) -#define __HAL_RCC_I2C3_IS_CLK_ENABLED() ((RCC->APB1ENR & (RCC_APB1ENR_I2C3EN)) != RESET) -#define __HAL_RCC_CAN1_IS_CLK_ENABLED() ((RCC->APB1ENR & (RCC_APB1ENR_CAN1EN)) != RESET) -#define __HAL_RCC_DAC_IS_CLK_ENABLED() ((RCC->APB1ENR & (RCC_APB1ENR_DACEN)) != RESET) -#define __HAL_RCC_UART7_IS_CLK_ENABLED() ((RCC->APB1ENR & (RCC_APB1ENR_UART7EN)) != RESET) -#define __HAL_RCC_UART8_IS_CLK_ENABLED() ((RCC->APB1ENR & (RCC_APB1ENR_UART8EN)) != RESET) - -#define __HAL_RCC_TIM2_IS_CLK_DISABLED() ((RCC->APB1ENR & (RCC_APB1ENR_TIM2EN)) == RESET) -#define __HAL_RCC_TIM3_IS_CLK_DISABLED() ((RCC->APB1ENR & (RCC_APB1ENR_TIM3EN)) == RESET) -#define __HAL_RCC_TIM4_IS_CLK_DISABLED() ((RCC->APB1ENR & (RCC_APB1ENR_TIM4EN)) == RESET) -#define __HAL_RCC_TIM5_IS_CLK_DISABLED() ((RCC->APB1ENR & (RCC_APB1ENR_TIM5EN)) == RESET) -#define __HAL_RCC_TIM6_IS_CLK_DISABLED() ((RCC->APB1ENR & (RCC_APB1ENR_TIM6EN)) == RESET) -#define __HAL_RCC_TIM7_IS_CLK_DISABLED() ((RCC->APB1ENR & (RCC_APB1ENR_TIM7EN)) == RESET) -#define __HAL_RCC_TIM12_IS_CLK_DISABLED() ((RCC->APB1ENR & (RCC_APB1ENR_TIM12EN)) == RESET) -#define __HAL_RCC_TIM13_IS_CLK_DISABLED() ((RCC->APB1ENR & (RCC_APB1ENR_TIM13EN)) == RESET) -#define __HAL_RCC_TIM14_IS_CLK_DISABLED() ((RCC->APB1ENR & (RCC_APB1ENR_TIM14EN)) == RESET) -#define __HAL_RCC_LPTIM1_IS_CLK_DISABLED() ((RCC->APB1ENR & (RCC_APB1ENR_LPTIM1EN)) == RESET) -#if defined (STM32F765xx) || defined (STM32F767xx) || defined (STM32F769xx) || defined (STM32F777xx) || defined (STM32F779xx) -#define __HAL_RCC_CAN3_IS_CLK_DISABLED() ((RCC->APB1ENR & (RCC_APB1ENR_CAN3EN)) == RESET) -#endif /* STM32F767xx || STM32F769xx || STM32F777xx || STM32F779xx */ -#define __HAL_RCC_SPI2_IS_CLK_DISABLED() ((RCC->APB1ENR & (RCC_APB1ENR_SPI2EN)) == RESET) -#define __HAL_RCC_SPI3_IS_CLK_DISABLED() ((RCC->APB1ENR & (RCC_APB1ENR_SPI3EN)) == RESET) -#define __HAL_RCC_USART2_IS_CLK_DISABLED() ((RCC->APB1ENR & (RCC_APB1ENR_USART2EN)) == RESET) -#define __HAL_RCC_USART3_IS_CLK_DISABLED() ((RCC->APB1ENR & (RCC_APB1ENR_USART3EN)) == RESET) -#define __HAL_RCC_UART4_IS_CLK_DISABLED() ((RCC->APB1ENR & (RCC_APB1ENR_UART4EN)) == RESET) -#define __HAL_RCC_UART5_IS_CLK_DISABLED() ((RCC->APB1ENR & (RCC_APB1ENR_UART5EN)) == RESET) -#define __HAL_RCC_I2C1_IS_CLK_DISABLED() ((RCC->APB1ENR & (RCC_APB1ENR_I2C1EN)) == RESET) -#define __HAL_RCC_I2C2_IS_CLK_DISABLED() ((RCC->APB1ENR & (RCC_APB1ENR_I2C2EN)) == RESET) -#define __HAL_RCC_I2C3_IS_CLK_DISABLED() ((RCC->APB1ENR & (RCC_APB1ENR_I2C3EN)) == RESET) -#define __HAL_RCC_CAN1_IS_CLK_DISABLED() ((RCC->APB1ENR & (RCC_APB1ENR_CAN1EN)) == RESET) -#define __HAL_RCC_DAC_IS_CLK_DISABLED() ((RCC->APB1ENR & (RCC_APB1ENR_DACEN)) == RESET) -#define __HAL_RCC_UART7_IS_CLK_DISABLED() ((RCC->APB1ENR & (RCC_APB1ENR_UART7EN)) == RESET) -#define __HAL_RCC_UART8_IS_CLK_DISABLED() ((RCC->APB1ENR & (RCC_APB1ENR_UART8EN)) == RESET) -#if defined (STM32F745xx) || defined (STM32F746xx) || defined (STM32F756xx) || defined (STM32F765xx) ||\ - defined (STM32F767xx) || defined (STM32F769xx) || defined (STM32F777xx) || defined (STM32F779xx) ||\ - defined (STM32F750xx) -#define __HAL_RCC_SPDIFRX_IS_CLK_ENABLED() ((RCC->APB1ENR & (RCC_APB1ENR_SPDIFRXEN)) != RESET) -#define __HAL_RCC_CAN2_IS_CLK_ENABLED() ((RCC->APB1ENR & (RCC_APB1ENR_CAN2EN)) != RESET) -#define __HAL_RCC_CEC_IS_CLK_ENABLED() ((RCC->APB1ENR & (RCC_APB1ENR_CECEN)) != RESET) -#define __HAL_RCC_I2C4_IS_CLK_ENABLED() ((RCC->APB1ENR & (RCC_APB1ENR_I2C4EN)) != RESET) - -#define __HAL_RCC_SPDIFRX_IS_CLK_DISABLED()((RCC->APB1ENR & (RCC_APB1ENR_SPDIFRXEN)) == RESET) -#define __HAL_RCC_CAN2_IS_CLK_DISABLED() ((RCC->APB1ENR & (RCC_APB1ENR_CAN2EN)) == RESET) -#define __HAL_RCC_CEC_IS_CLK_DISABLED() ((RCC->APB1ENR & (RCC_APB1ENR_CECEN)) == RESET) -#define __HAL_RCC_I2C4_IS_CLK_DISABLED() ((RCC->APB1ENR & (RCC_APB1ENR_I2C4EN)) == RESET) -#endif /* STM32F745xx || STM32F746xx || STM32F756xx || STM32F765xx || STM32F767xx || STM32F769xx || STM32F777xx || STM32F779xx || STM32F750xx */ - -#if defined (STM32F722xx) || defined (STM32F723xx) || defined (STM32F732xx) || defined (STM32F733xx) ||\ - defined (STM32F765xx) || defined (STM32F767xx) || defined (STM32F769xx) || defined (STM32F777xx) ||\ - defined (STM32F779xx) || defined (STM32F730xx) -#define __HAL_RCC_RTC_IS_CLK_ENABLED() ((RCC->APB1ENR & (RCC_APB1ENR_RTCEN)) != RESET) -#define __HAL_RCC_RTC_IS_CLK_DISABLED() ((RCC->APB1ENR & (RCC_APB1ENR_RTCEN)) == RESET) -#endif /* STM32F722xx || STM32F723xx || STM32F732xx || STM32F733xx || STM32F765xx || STM32F767xx || - STM32F769xx || STM32F777xx || STM32F779xx || STM32F730xx */ - -/** @brief Get the enable or disable status of the APB2 peripheral clock. - * @note After reset, the peripheral clock (used for registers read/write access) - * is disabled and the application software has to enable this clock before - * using it. - */ -#define __HAL_RCC_TIM1_IS_CLK_ENABLED() ((RCC->APB2ENR & (RCC_APB2ENR_TIM1EN)) != RESET) -#define __HAL_RCC_TIM8_IS_CLK_ENABLED() ((RCC->APB2ENR & (RCC_APB2ENR_TIM8EN)) != RESET) -#define __HAL_RCC_USART1_IS_CLK_ENABLED() ((RCC->APB2ENR & (RCC_APB2ENR_USART1EN)) != RESET) -#define __HAL_RCC_USART6_IS_CLK_ENABLED() ((RCC->APB2ENR & (RCC_APB2ENR_USART6EN)) != RESET) -#define __HAL_RCC_ADC1_IS_CLK_ENABLED() ((RCC->APB2ENR & (RCC_APB2ENR_ADC1EN)) != RESET) -#define __HAL_RCC_ADC2_IS_CLK_ENABLED() ((RCC->APB2ENR & (RCC_APB2ENR_ADC2EN)) != RESET) -#define __HAL_RCC_ADC3_IS_CLK_ENABLED() ((RCC->APB2ENR & (RCC_APB2ENR_ADC3EN)) != RESET) -#define __HAL_RCC_SDMMC1_IS_CLK_ENABLED() ((RCC->APB2ENR & (RCC_APB2ENR_SDMMC1EN)) != RESET) -#define __HAL_RCC_SPI1_IS_CLK_ENABLED() ((RCC->APB2ENR & (RCC_APB2ENR_SPI1EN)) != RESET) -#define __HAL_RCC_SPI4_IS_CLK_ENABLED() ((RCC->APB2ENR & (RCC_APB2ENR_SPI4EN)) != RESET) -#define __HAL_RCC_TIM9_IS_CLK_ENABLED() ((RCC->APB2ENR & (RCC_APB2ENR_TIM9EN)) != RESET) -#define __HAL_RCC_TIM10_IS_CLK_ENABLED() ((RCC->APB2ENR & (RCC_APB2ENR_TIM10EN)) != RESET) -#define __HAL_RCC_TIM11_IS_CLK_ENABLED() ((RCC->APB2ENR & (RCC_APB2ENR_TIM11EN)) != RESET) -#define __HAL_RCC_SPI5_IS_CLK_ENABLED() ((RCC->APB2ENR & (RCC_APB2ENR_SPI5EN)) != RESET) -#define __HAL_RCC_SPI6_IS_CLK_ENABLED() ((RCC->APB2ENR & (RCC_APB2ENR_SPI6EN)) != RESET) -#define __HAL_RCC_SAI1_IS_CLK_ENABLED() ((RCC->APB2ENR & (RCC_APB2ENR_SAI1EN)) != RESET) -#define __HAL_RCC_SAI2_IS_CLK_ENABLED() ((RCC->APB2ENR & (RCC_APB2ENR_SAI2EN)) != RESET) -#if defined (STM32F746xx) || defined (STM32F756xx) || defined (STM32F767xx) || defined (STM32F769xx) || defined (STM32F777xx) || defined (STM32F779xx) || defined (STM32F750xx) -#define __HAL_RCC_LTDC_IS_CLK_ENABLED() ((RCC->APB2ENR & (RCC_APB2ENR_LTDCEN)) != RESET) -#endif /* STM32F746xx || STM32F756xx || STM32F767xx || STM32F769xx || STM32F777xx || STM32F779xx || STM32F750xx */ -#if defined (STM32F769xx) || defined (STM32F779xx) -#define __HAL_RCC_DSI_IS_CLK_ENABLED() ((RCC->APB2ENR & (RCC_APB2ENR_DSIEN)) != RESET) -#endif /* STM32F769xx || STM32F779xx */ -#if defined (STM32F722xx) || defined (STM32F723xx) || defined (STM32F732xx) || defined (STM32F733xx) || defined (STM32F765xx) ||\ - defined (STM32F767xx) || defined (STM32F769xx) || defined (STM32F777xx) || defined (STM32F779xx) || defined (STM32F730xx) -#define __HAL_RCC_SDMMC2_IS_CLK_ENABLED() ((RCC->APB2ENR & (RCC_APB2ENR_SDMMC2EN)) != RESET) -#endif /* STM32F722xx || STM32F723xx || STM32F732xx || STM32F733xx || STM32F765xx || STM32F767xx || STM32F769xx || STM32F777xx || STM32F779xx || STM32F730xx */ -#if defined (STM32F765xx) || defined (STM32F767xx) || defined (STM32F769xx) || defined (STM32F777xx) || defined (STM32F779xx) -#define __HAL_RCC_DFSDM1_IS_CLK_ENABLED() ((RCC->APB2ENR & (RCC_APB2ENR_DFSDM1EN)) != RESET) -#define __HAL_RCC_MDIO_IS_CLK_ENABLED() ((RCC->APB2ENR & (RCC_APB2ENR_MDIOEN)) != RESET) -#endif /* STM32F767xx || STM32F769xx || STM32F777xx || STM32F779xx */ -#if defined (STM32F723xx) || defined (STM32F733xx) || defined (STM32F730xx) -#define __HAL_RCC_OTGPHYC_IS_CLK_ENABLED() ((RCC->APB2ENR & (RCC_APB2ENR_OTGPHYCEN)) != RESET) -#endif /* STM32F723xx || STM32F733xx || STM32F730xx */ - -#define __HAL_RCC_TIM1_IS_CLK_DISABLED() ((RCC->APB2ENR & (RCC_APB2ENR_TIM1EN)) == RESET) -#define __HAL_RCC_TIM8_IS_CLK_DISABLED() ((RCC->APB2ENR & (RCC_APB2ENR_TIM8EN)) == RESET) -#define __HAL_RCC_USART1_IS_CLK_DISABLED() ((RCC->APB2ENR & (RCC_APB2ENR_USART1EN)) == RESET) -#define __HAL_RCC_USART6_IS_CLK_DISABLED() ((RCC->APB2ENR & (RCC_APB2ENR_USART6EN)) == RESET) -#define __HAL_RCC_ADC1_IS_CLK_DISABLED() ((RCC->APB2ENR & (RCC_APB2ENR_ADC1EN)) == RESET) -#define __HAL_RCC_ADC2_IS_CLK_DISABLED() ((RCC->APB2ENR & (RCC_APB2ENR_ADC2EN)) == RESET) -#define __HAL_RCC_ADC3_IS_CLK_DISABLED() ((RCC->APB2ENR & (RCC_APB2ENR_ADC3EN)) == RESET) -#define __HAL_RCC_SDMMC1_IS_CLK_DISABLED() ((RCC->APB2ENR & (RCC_APB2ENR_SDMMC1EN)) == RESET) -#define __HAL_RCC_SPI1_IS_CLK_DISABLED() ((RCC->APB2ENR & (RCC_APB2ENR_SPI1EN)) == RESET) -#define __HAL_RCC_SPI4_IS_CLK_DISABLED() ((RCC->APB2ENR & (RCC_APB2ENR_SPI4EN)) == RESET) -#define __HAL_RCC_TIM9_IS_CLK_DISABLED() ((RCC->APB2ENR & (RCC_APB2ENR_TIM9EN)) == RESET) -#define __HAL_RCC_TIM10_IS_CLK_DISABLED() ((RCC->APB2ENR & (RCC_APB2ENR_TIM10EN)) == RESET) -#define __HAL_RCC_TIM11_IS_CLK_DISABLED() ((RCC->APB2ENR & (RCC_APB2ENR_TIM11EN)) == RESET) -#define __HAL_RCC_SPI5_IS_CLK_DISABLED() ((RCC->APB2ENR & (RCC_APB2ENR_SPI5EN)) == RESET) -#define __HAL_RCC_SPI6_IS_CLK_DISABLED() ((RCC->APB2ENR & (RCC_APB2ENR_SPI6EN)) == RESET) -#define __HAL_RCC_SAI1_IS_CLK_DISABLED() ((RCC->APB2ENR & (RCC_APB2ENR_SAI1EN)) == RESET) -#define __HAL_RCC_SAI2_IS_CLK_DISABLED() ((RCC->APB2ENR & (RCC_APB2ENR_SAI2EN)) == RESET) -#if defined (STM32F746xx) || defined (STM32F756xx) || defined (STM32F767xx) || defined (STM32F769xx) || defined (STM32F777xx) || defined (STM32F779xx) || defined (STM32F750xx) -#define __HAL_RCC_LTDC_IS_CLK_DISABLED() ((RCC->APB2ENR & (RCC_APB2ENR_LTDCEN)) == RESET) -#endif /* STM32F746xx || STM32F756xx || STM32F767xx || STM32F769xx || STM32F777xx || STM32F779xx || STM32F750xx */ -#if defined (STM32F769xx) || defined (STM32F779xx) -#define __HAL_RCC_DSI_IS_CLK_DISABLED() ((RCC->APB2ENR & (RCC_APB2ENR_DSIEN)) == RESET) -#endif /* STM32F769xx || STM32F779xx */ -#if defined (STM32F722xx) || defined (STM32F723xx) || defined (STM32F732xx) || defined (STM32F733xx) || defined (STM32F765xx) ||\ - defined (STM32F767xx) || defined (STM32F769xx) || defined (STM32F777xx) || defined (STM32F779xx) || defined (STM32F730xx) -#define __HAL_RCC_SDMMC2_IS_CLK_DISABLED() ((RCC->APB2ENR & (RCC_APB2ENR_SDMMC2EN)) == RESET) -#endif /* STM32F722xx || STM32F723xx || STM32F732xx || STM32F733xx || STM32F765xx || STM32F767xx || STM32F769xx || STM32F777xx || STM32F779xx || STM32F730xx */ -#if defined (STM32F765xx) || defined (STM32F767xx) || defined (STM32F769xx) || defined (STM32F777xx) || defined (STM32F779xx) -#define __HAL_RCC_DFSDM1_IS_CLK_DISABLED() ((RCC->APB2ENR & (RCC_APB2ENR_DFSDM1EN)) == RESET) -#define __HAL_RCC_MDIO_IS_CLK_DISABLED() ((RCC->APB2ENR & (RCC_APB2ENR_MDIOEN)) == RESET) -#endif /* STM32F767xx || STM32F769xx || STM32F777xx || STM32F779xx */ -#if defined (STM32F723xx) || defined (STM32F733xx) || defined (STM32F730xx) -#define __HAL_RCC_OTGPHYC_IS_CLK_DISABLED() ((RCC->APB2ENR & (RCC_APB2ENR_OTGPHYCEN)) == RESET) -#endif /* STM32F723xx || STM32F733xx || STM32F730xx */ - -/** - * @} - */ - -/** @defgroup RCCEx_Force_Release_Peripheral_Reset RCCEx Force Release Peripheral Reset - * @brief Forces or releases AHB/APB peripheral reset. - * @{ - */ - -/** @brief Force or release AHB1 peripheral reset. - */ -#define __HAL_RCC_DMA2_FORCE_RESET() (RCC->AHB1RSTR |= (RCC_AHB1RSTR_DMA2RST)) -#define __HAL_RCC_USB_OTG_HS_FORCE_RESET() (RCC->AHB1RSTR |= (RCC_AHB1RSTR_OTGHRST)) -#define __HAL_RCC_GPIOA_FORCE_RESET() (RCC->AHB1RSTR |= (RCC_AHB1RSTR_GPIOARST)) -#define __HAL_RCC_GPIOB_FORCE_RESET() (RCC->AHB1RSTR |= (RCC_AHB1RSTR_GPIOBRST)) -#define __HAL_RCC_GPIOC_FORCE_RESET() (RCC->AHB1RSTR |= (RCC_AHB1RSTR_GPIOCRST)) -#define __HAL_RCC_GPIOD_FORCE_RESET() (RCC->AHB1RSTR |= (RCC_AHB1RSTR_GPIODRST)) -#define __HAL_RCC_GPIOE_FORCE_RESET() (RCC->AHB1RSTR |= (RCC_AHB1RSTR_GPIOERST)) -#define __HAL_RCC_GPIOF_FORCE_RESET() (RCC->AHB1RSTR |= (RCC_AHB1RSTR_GPIOFRST)) -#define __HAL_RCC_GPIOG_FORCE_RESET() (RCC->AHB1RSTR |= (RCC_AHB1RSTR_GPIOGRST)) -#define __HAL_RCC_GPIOH_FORCE_RESET() (RCC->AHB1RSTR |= (RCC_AHB1RSTR_GPIOHRST)) -#define __HAL_RCC_GPIOI_FORCE_RESET() (RCC->AHB1RSTR |= (RCC_AHB1RSTR_GPIOIRST)) - -#define __HAL_RCC_DMA2_RELEASE_RESET() (RCC->AHB1RSTR &= ~(RCC_AHB1RSTR_DMA2RST)) -#define __HAL_RCC_USB_OTG_HS_RELEASE_RESET() (RCC->AHB1RSTR &= ~(RCC_AHB1RSTR_OTGHRST)) -#define __HAL_RCC_GPIOA_RELEASE_RESET() (RCC->AHB1RSTR &= ~(RCC_AHB1RSTR_GPIOARST)) -#define __HAL_RCC_GPIOB_RELEASE_RESET() (RCC->AHB1RSTR &= ~(RCC_AHB1RSTR_GPIOBRST)) -#define __HAL_RCC_GPIOC_RELEASE_RESET() (RCC->AHB1RSTR &= ~(RCC_AHB1RSTR_GPIOCRST)) -#define __HAL_RCC_GPIOD_RELEASE_RESET() (RCC->AHB1RSTR &= ~(RCC_AHB1RSTR_GPIODRST)) -#define __HAL_RCC_GPIOE_RELEASE_RESET() (RCC->AHB1RSTR &= ~(RCC_AHB1RSTR_GPIOERST)) -#define __HAL_RCC_GPIOF_RELEASE_RESET() (RCC->AHB1RSTR &= ~(RCC_AHB1RSTR_GPIOFRST)) -#define __HAL_RCC_GPIOG_RELEASE_RESET() (RCC->AHB1RSTR &= ~(RCC_AHB1RSTR_GPIOGRST)) -#define __HAL_RCC_GPIOH_RELEASE_RESET() (RCC->AHB1RSTR &= ~(RCC_AHB1RSTR_GPIOHRST)) -#define __HAL_RCC_GPIOI_RELEASE_RESET() (RCC->AHB1RSTR &= ~(RCC_AHB1RSTR_GPIOIRST)) - -#if defined (STM32F745xx) || defined (STM32F746xx) || defined (STM32F756xx) || defined (STM32F765xx) ||\ - defined (STM32F767xx) || defined (STM32F769xx) || defined (STM32F777xx) || defined (STM32F779xx) ||\ - defined (STM32F750xx) -#define __HAL_RCC_DMA2D_FORCE_RESET() (RCC->AHB1RSTR |= (RCC_AHB1RSTR_DMA2DRST)) -#define __HAL_RCC_ETHMAC_FORCE_RESET() (RCC->AHB1RSTR |= (RCC_AHB1RSTR_ETHMACRST)) -#define __HAL_RCC_GPIOJ_FORCE_RESET() (RCC->AHB1RSTR |= (RCC_AHB1RSTR_GPIOJRST)) -#define __HAL_RCC_GPIOK_FORCE_RESET() (RCC->AHB1RSTR |= (RCC_AHB1RSTR_GPIOKRST)) - -#define __HAL_RCC_DMA2D_RELEASE_RESET() (RCC->AHB1RSTR &= ~(RCC_AHB1RSTR_DMA2DRST)) -#define __HAL_RCC_ETHMAC_RELEASE_RESET() (RCC->AHB1RSTR &= ~(RCC_AHB1RSTR_ETHMACRST)) -#define __HAL_RCC_GPIOJ_RELEASE_RESET() (RCC->AHB1RSTR &= ~(RCC_AHB1RSTR_GPIOJRST)) -#define __HAL_RCC_GPIOK_RELEASE_RESET() (RCC->AHB1RSTR &= ~(RCC_AHB1RSTR_GPIOKRST)) -#endif /* STM32F745xx || STM32F746xx || STM32F756xx || STM32F765xx || STM32F767xx || STM32F769xx || STM32F777xx || STM32F779xx || STM32F750xx */ - -/** @brief Force or release AHB2 peripheral reset. - */ -#define __HAL_RCC_AHB2_FORCE_RESET() (RCC->AHB2RSTR = 0xFFFFFFFFU) -#define __HAL_RCC_RNG_FORCE_RESET() (RCC->AHB2RSTR |= (RCC_AHB2RSTR_RNGRST)) -#define __HAL_RCC_USB_OTG_FS_FORCE_RESET() (RCC->AHB2RSTR |= (RCC_AHB2RSTR_OTGFSRST)) - -#define __HAL_RCC_AHB2_RELEASE_RESET() (RCC->AHB2RSTR = 0x00U) -#define __HAL_RCC_RNG_RELEASE_RESET() (RCC->AHB2RSTR &= ~(RCC_AHB2RSTR_RNGRST)) -#define __HAL_RCC_USB_OTG_FS_RELEASE_RESET() (RCC->AHB2RSTR &= ~(RCC_AHB2RSTR_OTGFSRST)) - -#if defined (STM32F767xx) || defined (STM32F769xx) || defined (STM32F777xx) || defined (STM32F779xx) -#define __HAL_RCC_JPEG_FORCE_RESET() (RCC->AHB2RSTR |= (RCC_AHB2RSTR_JPEGRST)) -#define __HAL_RCC_JPEG_RELEASE_RESET() (RCC->AHB2RSTR &= ~(RCC_AHB2RSTR_JPEGRST)) -#endif /* STM32F767xx || STM32F769xx || STM32F777xx || STM32F779xx */ - -#if defined(STM32F756xx) || defined (STM32F777xx) || defined (STM32F779xx) || defined (STM32F750xx) -#define __HAL_RCC_CRYP_FORCE_RESET() (RCC->AHB2RSTR |= (RCC_AHB2RSTR_CRYPRST)) -#define __HAL_RCC_HASH_FORCE_RESET() (RCC->AHB2RSTR |= (RCC_AHB2RSTR_HASHRST)) -#define __HAL_RCC_CRYP_RELEASE_RESET() (RCC->AHB2RSTR &= ~(RCC_AHB2RSTR_CRYPRST)) -#define __HAL_RCC_HASH_RELEASE_RESET() (RCC->AHB2RSTR &= ~(RCC_AHB2RSTR_HASHRST)) -#endif /* STM32F756xx || STM32F777xx || STM32F779xx || STM32F750xx */ - -#if defined(STM32F732xx) || defined (STM32F733xx) || defined (STM32F730xx) -#define __HAL_RCC_AES_FORCE_RESET() (RCC->AHB2RSTR |= (RCC_AHB2RSTR_AESRST)) -#define __HAL_RCC_AES_RELEASE_RESET() (RCC->AHB2RSTR &= ~(RCC_AHB2RSTR_AESRST)) -#endif /* STM32F732xx || STM32F733xx || STM32F730xx */ - -#if defined (STM32F745xx) || defined (STM32F746xx) || defined (STM32F756xx) || defined (STM32F765xx) ||\ - defined (STM32F767xx) || defined (STM32F769xx) || defined (STM32F777xx) || defined (STM32F779xx) ||\ - defined (STM32F750xx) -#define __HAL_RCC_DCMI_FORCE_RESET() (RCC->AHB2RSTR |= (RCC_AHB2RSTR_DCMIRST)) -#define __HAL_RCC_DCMI_RELEASE_RESET() (RCC->AHB2RSTR &= ~(RCC_AHB2RSTR_DCMIRST)) -#endif /* STM32F745xx || STM32F746xx || STM32F756xx || STM32F765xx || STM32F767xx || STM32F769xx || STM32F777xx || STM32F779xx || STM32F750xx */ - -/** @brief Force or release AHB3 peripheral reset - */ -#define __HAL_RCC_AHB3_FORCE_RESET() (RCC->AHB3RSTR = 0xFFFFFFFFU) -#define __HAL_RCC_FMC_FORCE_RESET() (RCC->AHB3RSTR |= (RCC_AHB3RSTR_FMCRST)) -#define __HAL_RCC_QSPI_FORCE_RESET() (RCC->AHB3RSTR |= (RCC_AHB3RSTR_QSPIRST)) - -#define __HAL_RCC_AHB3_RELEASE_RESET() (RCC->AHB3RSTR = 0x00U) -#define __HAL_RCC_FMC_RELEASE_RESET() (RCC->AHB3RSTR &= ~(RCC_AHB3RSTR_FMCRST)) -#define __HAL_RCC_QSPI_RELEASE_RESET() (RCC->AHB3RSTR &= ~(RCC_AHB3RSTR_QSPIRST)) - -/** @brief Force or release APB1 peripheral reset. - */ -#define __HAL_RCC_TIM2_FORCE_RESET() (RCC->APB1RSTR |= (RCC_APB1RSTR_TIM2RST)) -#define __HAL_RCC_TIM3_FORCE_RESET() (RCC->APB1RSTR |= (RCC_APB1RSTR_TIM3RST)) -#define __HAL_RCC_TIM4_FORCE_RESET() (RCC->APB1RSTR |= (RCC_APB1RSTR_TIM4RST)) -#define __HAL_RCC_TIM5_FORCE_RESET() (RCC->APB1RSTR |= (RCC_APB1RSTR_TIM5RST)) -#define __HAL_RCC_TIM6_FORCE_RESET() (RCC->APB1RSTR |= (RCC_APB1RSTR_TIM6RST)) -#define __HAL_RCC_TIM7_FORCE_RESET() (RCC->APB1RSTR |= (RCC_APB1RSTR_TIM7RST)) -#define __HAL_RCC_TIM12_FORCE_RESET() (RCC->APB1RSTR |= (RCC_APB1RSTR_TIM12RST)) -#define __HAL_RCC_TIM13_FORCE_RESET() (RCC->APB1RSTR |= (RCC_APB1RSTR_TIM13RST)) -#define __HAL_RCC_TIM14_FORCE_RESET() (RCC->APB1RSTR |= (RCC_APB1RSTR_TIM14RST)) -#define __HAL_RCC_LPTIM1_FORCE_RESET() (RCC->APB1RSTR |= (RCC_APB1RSTR_LPTIM1RST)) -#if defined (STM32F765xx) || defined (STM32F767xx) || defined (STM32F769xx) || defined (STM32F777xx) || defined (STM32F779xx) -#define __HAL_RCC_CAN3_FORCE_RESET() (RCC->APB1RSTR |= (RCC_APB1RSTR_CAN3RST)) -#endif /* STM32F767xx || STM32F769xx || STM32F777xx || STM32F779xx */ -#define __HAL_RCC_SPI2_FORCE_RESET() (RCC->APB1RSTR |= (RCC_APB1RSTR_SPI2RST)) -#define __HAL_RCC_SPI3_FORCE_RESET() (RCC->APB1RSTR |= (RCC_APB1RSTR_SPI3RST)) -#define __HAL_RCC_USART2_FORCE_RESET() (RCC->APB1RSTR |= (RCC_APB1RSTR_USART2RST)) -#define __HAL_RCC_USART3_FORCE_RESET() (RCC->APB1RSTR |= (RCC_APB1RSTR_USART3RST)) -#define __HAL_RCC_UART4_FORCE_RESET() (RCC->APB1RSTR |= (RCC_APB1RSTR_UART4RST)) -#define __HAL_RCC_UART5_FORCE_RESET() (RCC->APB1RSTR |= (RCC_APB1RSTR_UART5RST)) -#define __HAL_RCC_I2C1_FORCE_RESET() (RCC->APB1RSTR |= (RCC_APB1RSTR_I2C1RST)) -#define __HAL_RCC_I2C2_FORCE_RESET() (RCC->APB1RSTR |= (RCC_APB1RSTR_I2C2RST)) -#define __HAL_RCC_I2C3_FORCE_RESET() (RCC->APB1RSTR |= (RCC_APB1RSTR_I2C3RST)) -#define __HAL_RCC_CAN1_FORCE_RESET() (RCC->APB1RSTR |= (RCC_APB1RSTR_CAN1RST)) -#define __HAL_RCC_DAC_FORCE_RESET() (RCC->APB1RSTR |= (RCC_APB1RSTR_DACRST)) -#define __HAL_RCC_UART7_FORCE_RESET() (RCC->APB1RSTR |= (RCC_APB1RSTR_UART7RST)) -#define __HAL_RCC_UART8_FORCE_RESET() (RCC->APB1RSTR |= (RCC_APB1RSTR_UART8RST)) - -#define __HAL_RCC_TIM2_RELEASE_RESET() (RCC->APB1RSTR &= ~(RCC_APB1RSTR_TIM2RST)) -#define __HAL_RCC_TIM3_RELEASE_RESET() (RCC->APB1RSTR &= ~(RCC_APB1RSTR_TIM3RST)) -#define __HAL_RCC_TIM4_RELEASE_RESET() (RCC->APB1RSTR &= ~(RCC_APB1RSTR_TIM4RST)) -#define __HAL_RCC_TIM5_RELEASE_RESET() (RCC->APB1RSTR &= ~(RCC_APB1RSTR_TIM5RST)) -#define __HAL_RCC_TIM6_RELEASE_RESET() (RCC->APB1RSTR &= ~(RCC_APB1RSTR_TIM6RST)) -#define __HAL_RCC_TIM7_RELEASE_RESET() (RCC->APB1RSTR &= ~(RCC_APB1RSTR_TIM7RST)) -#define __HAL_RCC_TIM12_RELEASE_RESET() (RCC->APB1RSTR &= ~(RCC_APB1RSTR_TIM12RST)) -#define __HAL_RCC_TIM13_RELEASE_RESET() (RCC->APB1RSTR &= ~(RCC_APB1RSTR_TIM13RST)) -#define __HAL_RCC_TIM14_RELEASE_RESET() (RCC->APB1RSTR &= ~(RCC_APB1RSTR_TIM14RST)) -#define __HAL_RCC_LPTIM1_RELEASE_RESET() (RCC->APB1RSTR &= ~(RCC_APB1RSTR_LPTIM1RST)) -#if defined (STM32F765xx) || defined (STM32F767xx) || defined (STM32F769xx) || defined (STM32F777xx) || defined (STM32F779xx) -#define __HAL_RCC_CAN3_RELEASE_RESET() (RCC->APB1RSTR &= ~(RCC_APB1RSTR_CAN3RST)) -#endif /* STM32F767xx || STM32F769xx || STM32F777xx || STM32F779xx */ -#define __HAL_RCC_SPI2_RELEASE_RESET() (RCC->APB1RSTR &= ~(RCC_APB1RSTR_SPI2RST)) -#define __HAL_RCC_SPI3_RELEASE_RESET() (RCC->APB1RSTR &= ~(RCC_APB1RSTR_SPI3RST)) -#define __HAL_RCC_USART2_RELEASE_RESET() (RCC->APB1RSTR &= ~(RCC_APB1RSTR_USART2RST)) -#define __HAL_RCC_USART3_RELEASE_RESET() (RCC->APB1RSTR &= ~(RCC_APB1RSTR_USART3RST)) -#define __HAL_RCC_UART4_RELEASE_RESET() (RCC->APB1RSTR &= ~(RCC_APB1RSTR_UART4RST)) -#define __HAL_RCC_UART5_RELEASE_RESET() (RCC->APB1RSTR &= ~(RCC_APB1RSTR_UART5RST)) -#define __HAL_RCC_I2C1_RELEASE_RESET() (RCC->APB1RSTR &= ~(RCC_APB1RSTR_I2C1RST)) -#define __HAL_RCC_I2C2_RELEASE_RESET() (RCC->APB1RSTR &= ~(RCC_APB1RSTR_I2C2RST)) -#define __HAL_RCC_I2C3_RELEASE_RESET() (RCC->APB1RSTR &= ~(RCC_APB1RSTR_I2C3RST)) -#define __HAL_RCC_CAN1_RELEASE_RESET() (RCC->APB1RSTR &= ~(RCC_APB1RSTR_CAN1RST)) -#define __HAL_RCC_DAC_RELEASE_RESET() (RCC->APB1RSTR &= ~(RCC_APB1RSTR_DACRST)) -#define __HAL_RCC_UART7_RELEASE_RESET() (RCC->APB1RSTR &= ~(RCC_APB1RSTR_UART7RST)) -#define __HAL_RCC_UART8_RELEASE_RESET() (RCC->APB1RSTR &= ~(RCC_APB1RSTR_UART8RST)) - -#if defined (STM32F745xx) || defined (STM32F746xx) || defined (STM32F756xx) || defined (STM32F765xx) ||\ - defined (STM32F767xx) || defined (STM32F769xx) || defined (STM32F777xx) || defined (STM32F779xx) ||\ - defined (STM32F750xx) -#define __HAL_RCC_SPDIFRX_FORCE_RESET() (RCC->APB1RSTR |= (RCC_APB1RSTR_SPDIFRXRST)) -#define __HAL_RCC_I2C4_FORCE_RESET() (RCC->APB1RSTR |= (RCC_APB1RSTR_I2C4RST)) -#define __HAL_RCC_CAN2_FORCE_RESET() (RCC->APB1RSTR |= (RCC_APB1RSTR_CAN2RST)) -#define __HAL_RCC_CEC_FORCE_RESET() (RCC->APB1RSTR |= (RCC_APB1RSTR_CECRST)) - -#define __HAL_RCC_SPDIFRX_RELEASE_RESET()(RCC->APB1RSTR &= ~(RCC_APB1RSTR_SPDIFRXRST)) -#define __HAL_RCC_I2C4_RELEASE_RESET() (RCC->APB1RSTR &= ~(RCC_APB1RSTR_I2C4RST)) -#define __HAL_RCC_CAN2_RELEASE_RESET() (RCC->APB1RSTR &= ~(RCC_APB1RSTR_CAN2RST)) -#define __HAL_RCC_CEC_RELEASE_RESET() (RCC->APB1RSTR &= ~(RCC_APB1RSTR_CECRST)) -#endif /* STM32F745xx || STM32F746xx || STM32F756xx || STM32F765xx || STM32F767xx || STM32F769xx || STM32F777xx || STM32F779xx || STM32F750xx */ - -/** @brief Force or release APB2 peripheral reset. - */ -#define __HAL_RCC_TIM1_FORCE_RESET() (RCC->APB2RSTR |= (RCC_APB2RSTR_TIM1RST)) -#define __HAL_RCC_TIM8_FORCE_RESET() (RCC->APB2RSTR |= (RCC_APB2RSTR_TIM8RST)) -#define __HAL_RCC_USART1_FORCE_RESET() (RCC->APB2RSTR |= (RCC_APB2RSTR_USART1RST)) -#define __HAL_RCC_USART6_FORCE_RESET() (RCC->APB2RSTR |= (RCC_APB2RSTR_USART6RST)) -#define __HAL_RCC_ADC_FORCE_RESET() (RCC->APB2RSTR |= (RCC_APB2RSTR_ADCRST)) -#define __HAL_RCC_SDMMC1_FORCE_RESET() (RCC->APB2RSTR |= (RCC_APB2RSTR_SDMMC1RST)) -#define __HAL_RCC_SPI1_FORCE_RESET() (RCC->APB2RSTR |= (RCC_APB2RSTR_SPI1RST)) -#define __HAL_RCC_SPI4_FORCE_RESET() (RCC->APB2RSTR |= (RCC_APB2RSTR_SPI4RST)) -#define __HAL_RCC_TIM9_FORCE_RESET() (RCC->APB2RSTR |= (RCC_APB2RSTR_TIM9RST)) -#define __HAL_RCC_TIM10_FORCE_RESET() (RCC->APB2RSTR |= (RCC_APB2RSTR_TIM10RST)) -#define __HAL_RCC_TIM11_FORCE_RESET() (RCC->APB2RSTR |= (RCC_APB2RSTR_TIM11RST)) -#define __HAL_RCC_SPI5_FORCE_RESET() (RCC->APB2RSTR |= (RCC_APB2RSTR_SPI5RST)) -#define __HAL_RCC_SPI6_FORCE_RESET() (RCC->APB2RSTR |= (RCC_APB2RSTR_SPI6RST)) -#define __HAL_RCC_SAI1_FORCE_RESET() (RCC->APB2RSTR |= (RCC_APB2RSTR_SAI1RST)) -#define __HAL_RCC_SAI2_FORCE_RESET() (RCC->APB2RSTR |= (RCC_APB2RSTR_SAI2RST)) -#if defined (STM32F746xx) || defined (STM32F756xx) || defined (STM32F767xx) || defined (STM32F769xx) || defined (STM32F777xx) || defined (STM32F779xx) || defined (STM32F750xx) -#define __HAL_RCC_LTDC_FORCE_RESET() (RCC->APB2RSTR |= (RCC_APB2RSTR_LTDCRST)) -#endif /* STM32F746xx || STM32F756xx || STM32F767xx || STM32F769xx || STM32F777xx || STM32F779xx || STM32F750xx */ -#if defined (STM32F723xx) || defined (STM32F733xx) || defined (STM32F730xx) -#define __HAL_RCC_OTGPHYC_FORCE_RESET() (RCC->APB2RSTR |= (RCC_APB2RSTR_OTGPHYCRST)) -#endif /* STM32F723xx || STM32F733xx || STM32F730xx */ - -#define __HAL_RCC_TIM1_RELEASE_RESET() (RCC->APB2RSTR &= ~(RCC_APB2RSTR_TIM1RST)) -#define __HAL_RCC_TIM8_RELEASE_RESET() (RCC->APB2RSTR &= ~(RCC_APB2RSTR_TIM8RST)) -#define __HAL_RCC_USART1_RELEASE_RESET() (RCC->APB2RSTR &= ~(RCC_APB2RSTR_USART1RST)) -#define __HAL_RCC_USART6_RELEASE_RESET() (RCC->APB2RSTR &= ~(RCC_APB2RSTR_USART6RST)) -#define __HAL_RCC_ADC_RELEASE_RESET() (RCC->APB2RSTR &= ~(RCC_APB2RSTR_ADCRST)) -#define __HAL_RCC_SDMMC1_RELEASE_RESET() (RCC->APB2RSTR &= ~(RCC_APB2RSTR_SDMMC1RST)) -#define __HAL_RCC_SPI1_RELEASE_RESET() (RCC->APB2RSTR &= ~(RCC_APB2RSTR_SPI1RST)) -#define __HAL_RCC_SPI4_RELEASE_RESET() (RCC->APB2RSTR &= ~(RCC_APB2RSTR_SPI4RST)) -#define __HAL_RCC_TIM9_RELEASE_RESET() (RCC->APB2RSTR &= ~(RCC_APB2RSTR_TIM9RST)) -#define __HAL_RCC_TIM10_RELEASE_RESET() (RCC->APB2RSTR &= ~(RCC_APB2RSTR_TIM10RST)) -#define __HAL_RCC_TIM11_RELEASE_RESET() (RCC->APB2RSTR &= ~(RCC_APB2RSTR_TIM11RST)) -#define __HAL_RCC_SPI5_RELEASE_RESET() (RCC->APB2RSTR &= ~(RCC_APB2RSTR_SPI5RST)) -#define __HAL_RCC_SPI6_RELEASE_RESET() (RCC->APB2RSTR &= ~(RCC_APB2RSTR_SPI6RST)) -#define __HAL_RCC_SAI1_RELEASE_RESET() (RCC->APB2RSTR &= ~(RCC_APB2RSTR_SAI1RST)) -#define __HAL_RCC_SAI2_RELEASE_RESET() (RCC->APB2RSTR &= ~(RCC_APB2RSTR_SAI2RST)) -#if defined (STM32F746xx) || defined (STM32F756xx) || defined (STM32F767xx) || defined (STM32F769xx) || defined (STM32F777xx) || defined (STM32F779xx) || defined (STM32F750xx) -#define __HAL_RCC_LTDC_RELEASE_RESET() (RCC->APB2RSTR &= ~(RCC_APB2RSTR_LTDCRST)) -#endif /* STM32F746xx || STM32F756xx || STM32F767xx || STM32F769xx || STM32F777xx || STM32F779xx || STM32F750xx */ -#if defined (STM32F723xx) || defined (STM32F733xx) || defined (STM32F730xx) -#define __HAL_RCC_OTGPHYC_RELEASE_RESET() (RCC->APB2RSTR &= ~(RCC_APB2RSTR_OTGPHYCRST)) -#endif /* STM32F723xx || STM32F733xx || STM32F730xx */ - -#if defined (STM32F769xx) || defined (STM32F779xx) -#define __HAL_RCC_DSI_FORCE_RESET() (RCC->APB2RSTR |= (RCC_APB2RSTR_DSIRST)) -#define __HAL_RCC_DSI_RELEASE_RESET() (RCC->APB2RSTR &= ~(RCC_APB2RSTR_DSIRST)) -#endif /* STM32F769xx || STM32F779xx */ - -#if defined (STM32F722xx) || defined (STM32F723xx) || defined (STM32F732xx) || defined (STM32F733xx) || defined (STM32F765xx) ||\ - defined (STM32F767xx) || defined (STM32F769xx) || defined (STM32F777xx) || defined (STM32F779xx) || defined (STM32F730xx) -#define __HAL_RCC_SDMMC2_FORCE_RESET() (RCC->APB2RSTR |= (RCC_APB2RSTR_SDMMC2RST)) -#define __HAL_RCC_SDMMC2_RELEASE_RESET() (RCC->APB2RSTR &= ~(RCC_APB2RSTR_SDMMC2RST)) -#endif /* STM32F722xx || STM32F723xx || STM32F732xx || STM32F733xx || STM32F765xx || STM32F767xx || STM32F769xx || STM32F777xx || STM32F779xx || STM32F730xx */ - -#if defined (STM32F765xx) || defined (STM32F767xx) || defined (STM32F769xx) || defined (STM32F777xx) || defined (STM32F779xx) -#define __HAL_RCC_DFSDM1_FORCE_RESET() (RCC->APB2RSTR |= (RCC_APB2RSTR_DFSDM1RST)) -#define __HAL_RCC_MDIO_FORCE_RESET() (RCC->APB2RSTR |= (RCC_APB2RSTR_MDIORST)) -#define __HAL_RCC_DFSDM1_RELEASE_RESET() (RCC->APB2RSTR &= ~(RCC_APB2RSTR_DFSDM1RST)) -#define __HAL_RCC_MDIO_RELEASE_RESET() (RCC->APB2RSTR &= ~(RCC_APB2RSTR_MDIORST)) -#endif /* STM32F767xx || STM32F769xx || STM32F777xx || STM32F779xx */ -/** - * @} - */ - -/** @defgroup RCCEx_Peripheral_Clock_Sleep_Enable_Disable RCCEx Peripheral Clock Sleep Enable Disable - * @brief Enables or disables the AHB/APB peripheral clock during Low Power (Sleep) mode. - * @note Peripheral clock gating in SLEEP mode can be used to further reduce - * power consumption. - * @note After wakeup from SLEEP mode, the peripheral clock is enabled again. - * @note By default, all peripheral clocks are enabled during SLEEP mode. - * @{ - */ - -/** @brief Enable or disable the AHB1 peripheral clock during Low Power (Sleep) mode. - */ -#define __HAL_RCC_FLITF_CLK_SLEEP_ENABLE() (RCC->AHB1LPENR |= (RCC_AHB1LPENR_FLITFLPEN)) -#define __HAL_RCC_AXI_CLK_SLEEP_ENABLE() (RCC->AHB1LPENR |= (RCC_AHB1LPENR_AXILPEN)) -#define __HAL_RCC_SRAM1_CLK_SLEEP_ENABLE() (RCC->AHB1LPENR |= (RCC_AHB1LPENR_SRAM1LPEN)) -#define __HAL_RCC_SRAM2_CLK_SLEEP_ENABLE() (RCC->AHB1LPENR |= (RCC_AHB1LPENR_SRAM2LPEN)) -#define __HAL_RCC_BKPSRAM_CLK_SLEEP_ENABLE() (RCC->AHB1LPENR |= (RCC_AHB1LPENR_BKPSRAMLPEN)) -#define __HAL_RCC_DTCM_CLK_SLEEP_ENABLE() (RCC->AHB1LPENR |= (RCC_AHB1LPENR_DTCMLPEN)) -#define __HAL_RCC_DMA2_CLK_SLEEP_ENABLE() (RCC->AHB1LPENR |= (RCC_AHB1LPENR_DMA2LPEN)) -#define __HAL_RCC_USB_OTG_HS_CLK_SLEEP_ENABLE() (RCC->AHB1LPENR |= (RCC_AHB1LPENR_OTGHSLPEN)) -#define __HAL_RCC_USB_OTG_HS_ULPI_CLK_SLEEP_ENABLE() (RCC->AHB1LPENR |= (RCC_AHB1LPENR_OTGHSULPILPEN)) -#define __HAL_RCC_GPIOA_CLK_SLEEP_ENABLE() (RCC->AHB1LPENR |= (RCC_AHB1LPENR_GPIOALPEN)) -#define __HAL_RCC_GPIOB_CLK_SLEEP_ENABLE() (RCC->AHB1LPENR |= (RCC_AHB1LPENR_GPIOBLPEN)) -#define __HAL_RCC_GPIOC_CLK_SLEEP_ENABLE() (RCC->AHB1LPENR |= (RCC_AHB1LPENR_GPIOCLPEN)) -#define __HAL_RCC_GPIOD_CLK_SLEEP_ENABLE() (RCC->AHB1LPENR |= (RCC_AHB1LPENR_GPIODLPEN)) -#define __HAL_RCC_GPIOE_CLK_SLEEP_ENABLE() (RCC->AHB1LPENR |= (RCC_AHB1LPENR_GPIOELPEN)) -#define __HAL_RCC_GPIOF_CLK_SLEEP_ENABLE() (RCC->AHB1LPENR |= (RCC_AHB1LPENR_GPIOFLPEN)) -#define __HAL_RCC_GPIOG_CLK_SLEEP_ENABLE() (RCC->AHB1LPENR |= (RCC_AHB1LPENR_GPIOGLPEN)) -#define __HAL_RCC_GPIOH_CLK_SLEEP_ENABLE() (RCC->AHB1LPENR |= (RCC_AHB1LPENR_GPIOHLPEN)) -#define __HAL_RCC_GPIOI_CLK_SLEEP_ENABLE() (RCC->AHB1LPENR |= (RCC_AHB1LPENR_GPIOILPEN)) - -#define __HAL_RCC_FLITF_CLK_SLEEP_DISABLE() (RCC->AHB1LPENR &= ~(RCC_AHB1LPENR_FLITFLPEN)) -#define __HAL_RCC_AXI_CLK_SLEEP_DISABLE() (RCC->AHB1LPENR &= ~(RCC_AHB1LPENR_AXILPEN)) -#define __HAL_RCC_SRAM1_CLK_SLEEP_DISABLE() (RCC->AHB1LPENR &= ~(RCC_AHB1LPENR_SRAM1LPEN)) -#define __HAL_RCC_SRAM2_CLK_SLEEP_DISABLE() (RCC->AHB1LPENR &= ~(RCC_AHB1LPENR_SRAM2LPEN)) -#define __HAL_RCC_BKPSRAM_CLK_SLEEP_DISABLE() (RCC->AHB1LPENR &= ~(RCC_AHB1LPENR_BKPSRAMLPEN)) -#define __HAL_RCC_DTCM_CLK_SLEEP_DISABLE() (RCC->AHB1LPENR &= ~(RCC_AHB1LPENR_DTCMLPEN)) -#define __HAL_RCC_DMA2_CLK_SLEEP_DISABLE() (RCC->AHB1LPENR &= ~(RCC_AHB1LPENR_DMA2LPEN)) -#define __HAL_RCC_USB_OTG_HS_CLK_SLEEP_DISABLE() (RCC->AHB1LPENR &= ~(RCC_AHB1LPENR_OTGHSLPEN)) -#define __HAL_RCC_USB_OTG_HS_ULPI_CLK_SLEEP_DISABLE() (RCC->AHB1LPENR &= ~(RCC_AHB1LPENR_OTGHSULPILPEN)) -#define __HAL_RCC_GPIOA_CLK_SLEEP_DISABLE() (RCC->AHB1LPENR &= ~(RCC_AHB1LPENR_GPIOALPEN)) -#define __HAL_RCC_GPIOB_CLK_SLEEP_DISABLE() (RCC->AHB1LPENR &= ~(RCC_AHB1LPENR_GPIOBLPEN)) -#define __HAL_RCC_GPIOC_CLK_SLEEP_DISABLE() (RCC->AHB1LPENR &= ~(RCC_AHB1LPENR_GPIOCLPEN)) -#define __HAL_RCC_GPIOD_CLK_SLEEP_DISABLE() (RCC->AHB1LPENR &= ~(RCC_AHB1LPENR_GPIODLPEN)) -#define __HAL_RCC_GPIOE_CLK_SLEEP_DISABLE() (RCC->AHB1LPENR &= ~(RCC_AHB1LPENR_GPIOELPEN)) -#define __HAL_RCC_GPIOF_CLK_SLEEP_DISABLE() (RCC->AHB1LPENR &= ~(RCC_AHB1LPENR_GPIOFLPEN)) -#define __HAL_RCC_GPIOG_CLK_SLEEP_DISABLE() (RCC->AHB1LPENR &= ~(RCC_AHB1LPENR_GPIOGLPEN)) -#define __HAL_RCC_GPIOH_CLK_SLEEP_DISABLE() (RCC->AHB1LPENR &= ~(RCC_AHB1LPENR_GPIOHLPEN)) -#define __HAL_RCC_GPIOI_CLK_SLEEP_DISABLE() (RCC->AHB1LPENR &= ~(RCC_AHB1LPENR_GPIOILPEN)) - -#if defined (STM32F745xx) || defined (STM32F746xx) || defined (STM32F756xx) || defined (STM32F765xx) ||\ - defined (STM32F767xx) || defined (STM32F769xx) || defined (STM32F777xx) || defined (STM32F779xx) ||\ - defined (STM32F750xx) -#define __HAL_RCC_DMA2D_CLK_SLEEP_ENABLE() (RCC->AHB1LPENR |= (RCC_AHB1LPENR_DMA2DLPEN)) -#define __HAL_RCC_ETHMAC_CLK_SLEEP_ENABLE() (RCC->AHB1LPENR |= (RCC_AHB1LPENR_ETHMACLPEN)) -#define __HAL_RCC_ETHMACTX_CLK_SLEEP_ENABLE() (RCC->AHB1LPENR |= (RCC_AHB1LPENR_ETHMACTXLPEN)) -#define __HAL_RCC_ETHMACRX_CLK_SLEEP_ENABLE() (RCC->AHB1LPENR |= (RCC_AHB1LPENR_ETHMACRXLPEN)) -#define __HAL_RCC_ETHMACPTP_CLK_SLEEP_ENABLE() (RCC->AHB1LPENR |= (RCC_AHB1LPENR_ETHMACPTPLPEN)) -#define __HAL_RCC_GPIOJ_CLK_SLEEP_ENABLE() (RCC->AHB1LPENR |= (RCC_AHB1LPENR_GPIOJLPEN)) -#define __HAL_RCC_GPIOK_CLK_SLEEP_ENABLE() (RCC->AHB1LPENR |= (RCC_AHB1LPENR_GPIOKLPEN)) - -#define __HAL_RCC_DMA2D_CLK_SLEEP_DISABLE() (RCC->AHB1LPENR &= ~(RCC_AHB1LPENR_DMA2DLPEN)) -#define __HAL_RCC_ETHMAC_CLK_SLEEP_DISABLE() (RCC->AHB1LPENR &= ~(RCC_AHB1LPENR_ETHMACLPEN)) -#define __HAL_RCC_ETHMACTX_CLK_SLEEP_DISABLE() (RCC->AHB1LPENR &= ~(RCC_AHB1LPENR_ETHMACTXLPEN)) -#define __HAL_RCC_ETHMACRX_CLK_SLEEP_DISABLE() (RCC->AHB1LPENR &= ~(RCC_AHB1LPENR_ETHMACRXLPEN)) -#define __HAL_RCC_ETHMACPTP_CLK_SLEEP_DISABLE() (RCC->AHB1LPENR &= ~(RCC_AHB1LPENR_ETHMACPTPLPEN)) -#define __HAL_RCC_GPIOJ_CLK_SLEEP_DISABLE() (RCC->AHB1LPENR &= ~(RCC_AHB1LPENR_GPIOJLPEN)) -#define __HAL_RCC_GPIOK_CLK_SLEEP_DISABLE() (RCC->AHB1LPENR &= ~(RCC_AHB1LPENR_GPIOKLPEN)) -#endif /* STM32F745xx || STM32F746xx || STM32F756xx || STM32F765xx || STM32F767xx || STM32F769xx || STM32F777xx || STM32F779xx || STM32F750xx */ - -/** @brief Enable or disable the AHB2 peripheral clock during Low Power (Sleep) mode. - * @note Peripheral clock gating in SLEEP mode can be used to further reduce - * power consumption. - * @note After wakeup from SLEEP mode, the peripheral clock is enabled again. - * @note By default, all peripheral clocks are enabled during SLEEP mode. - */ -#if defined (STM32F745xx) || defined (STM32F746xx) || defined (STM32F756xx) || defined (STM32F765xx) ||\ - defined (STM32F767xx) || defined (STM32F769xx) || defined (STM32F777xx) || defined (STM32F779xx) ||\ - defined (STM32F750xx) -#define __HAL_RCC_DCMI_CLK_SLEEP_ENABLE() (RCC->AHB2LPENR |= (RCC_AHB2LPENR_DCMILPEN)) -#define __HAL_RCC_DCMI_CLK_SLEEP_DISABLE() (RCC->AHB2LPENR &= ~(RCC_AHB2LPENR_DCMILPEN)) -#endif /* STM32F745xx || STM32F746xx || STM32F756xx || STM32F765xx || STM32F767xx || STM32F769xx || STM32F777xx || STM32F779xx || STM32F750xx */ - -#if defined (STM32F767xx) || defined (STM32F769xx) || defined (STM32F777xx) || defined (STM32F779xx) -#define __HAL_RCC_JPEG_CLK_SLEEP_ENABLE() (RCC->AHB2LPENR |= (RCC_AHB2LPENR_JPEGLPEN)) -#define __HAL_RCC_JPEG_CLK_SLEEP_DISABLE() (RCC->AHB2LPENR &= ~(RCC_AHB2LPENR_JPEGLPEN)) -#endif /* STM32F767xx || STM32F769xx || STM32F777xx || STM32F779xx */ - -#define __HAL_RCC_RNG_CLK_SLEEP_ENABLE() (RCC->AHB2LPENR |= (RCC_AHB2LPENR_RNGLPEN)) -#define __HAL_RCC_RNG_CLK_SLEEP_DISABLE() (RCC->AHB2LPENR &= ~(RCC_AHB2LPENR_RNGLPEN)) - -#define __HAL_RCC_USB_OTG_FS_CLK_SLEEP_ENABLE() (RCC->AHB2LPENR |= (RCC_AHB2LPENR_OTGFSLPEN)) -#define __HAL_RCC_USB_OTG_FS_CLK_SLEEP_DISABLE() (RCC->AHB2LPENR &= ~(RCC_AHB2LPENR_OTGFSLPEN)) - -#if defined(STM32F756xx) || defined (STM32F777xx) || defined (STM32F779xx) || defined (STM32F750xx) -#define __HAL_RCC_CRYP_CLK_SLEEP_ENABLE() (RCC->AHB2LPENR |= (RCC_AHB2LPENR_CRYPLPEN)) -#define __HAL_RCC_HASH_CLK_SLEEP_ENABLE() (RCC->AHB2LPENR |= (RCC_AHB2LPENR_HASHLPEN)) - -#define __HAL_RCC_CRYP_CLK_SLEEP_DISABLE() (RCC->AHB2LPENR &= ~(RCC_AHB2LPENR_CRYPLPEN)) -#define __HAL_RCC_HASH_CLK_SLEEP_DISABLE() (RCC->AHB2LPENR &= ~(RCC_AHB2LPENR_HASHLPEN)) -#endif /* STM32F756xx || STM32F777xx || STM32F779xx || STM32F750xx */ - -#if defined(STM32F732xx) || defined (STM32F733xx) || defined (STM32F730xx) -#define __HAL_RCC_AES_CLK_SLEEP_ENABLE() (RCC->AHB2LPENR |= (RCC_AHB2LPENR_AESLPEN)) -#define __HAL_RCC_AES_CLK_SLEEP_DISABLE() (RCC->AHB2LPENR &= ~(RCC_AHB2LPENR_AESLPEN)) -#endif /* STM32F732xx || STM32F733xx || STM32F730xx */ - -/** @brief Enable or disable the AHB3 peripheral clock during Low Power (Sleep) mode. - * @note Peripheral clock gating in SLEEP mode can be used to further reduce - * power consumption. - * @note After wakeup from SLEEP mode, the peripheral clock is enabled again. - * @note By default, all peripheral clocks are enabled during SLEEP mode. - */ -#define __HAL_RCC_FMC_CLK_SLEEP_ENABLE() (RCC->AHB3LPENR |= (RCC_AHB3LPENR_FMCLPEN)) -#define __HAL_RCC_FMC_CLK_SLEEP_DISABLE() (RCC->AHB3LPENR &= ~(RCC_AHB3LPENR_FMCLPEN)) - -#define __HAL_RCC_QSPI_CLK_SLEEP_ENABLE() (RCC->AHB3LPENR |= (RCC_AHB3LPENR_QSPILPEN)) -#define __HAL_RCC_QSPI_CLK_SLEEP_DISABLE() (RCC->AHB3LPENR &= ~(RCC_AHB3LPENR_QSPILPEN)) - -/** @brief Enable or disable the APB1 peripheral clock during Low Power (Sleep) mode. - * @note Peripheral clock gating in SLEEP mode can be used to further reduce - * power consumption. - * @note After wakeup from SLEEP mode, the peripheral clock is enabled again. - * @note By default, all peripheral clocks are enabled during SLEEP mode. - */ -#define __HAL_RCC_TIM2_CLK_SLEEP_ENABLE() (RCC->APB1LPENR |= (RCC_APB1LPENR_TIM2LPEN)) -#define __HAL_RCC_TIM3_CLK_SLEEP_ENABLE() (RCC->APB1LPENR |= (RCC_APB1LPENR_TIM3LPEN)) -#define __HAL_RCC_TIM4_CLK_SLEEP_ENABLE() (RCC->APB1LPENR |= (RCC_APB1LPENR_TIM4LPEN)) -#define __HAL_RCC_TIM5_CLK_SLEEP_ENABLE() (RCC->APB1LPENR |= (RCC_APB1LPENR_TIM5LPEN)) -#define __HAL_RCC_TIM6_CLK_SLEEP_ENABLE() (RCC->APB1LPENR |= (RCC_APB1LPENR_TIM6LPEN)) -#define __HAL_RCC_TIM7_CLK_SLEEP_ENABLE() (RCC->APB1LPENR |= (RCC_APB1LPENR_TIM7LPEN)) -#define __HAL_RCC_TIM12_CLK_SLEEP_ENABLE() (RCC->APB1LPENR |= (RCC_APB1LPENR_TIM12LPEN)) -#define __HAL_RCC_TIM13_CLK_SLEEP_ENABLE() (RCC->APB1LPENR |= (RCC_APB1LPENR_TIM13LPEN)) -#define __HAL_RCC_TIM14_CLK_SLEEP_ENABLE() (RCC->APB1LPENR |= (RCC_APB1LPENR_TIM14LPEN)) -#define __HAL_RCC_LPTIM1_CLK_SLEEP_ENABLE() (RCC->APB1LPENR |= (RCC_APB1LPENR_LPTIM1LPEN)) -#if defined (STM32F765xx) || defined (STM32F767xx) || defined (STM32F769xx) || defined (STM32F777xx) || defined (STM32F779xx) -#define __HAL_RCC_CAN3_CLK_SLEEP_ENABLE() (RCC->APB1LPENR |= (RCC_APB1LPENR_CAN3LPEN)) -#endif /* STM32F767xx || STM32F769xx || STM32F777xx || STM32F779xx */ -#define __HAL_RCC_SPI2_CLK_SLEEP_ENABLE() (RCC->APB1LPENR |= (RCC_APB1LPENR_SPI2LPEN)) -#define __HAL_RCC_SPI3_CLK_SLEEP_ENABLE() (RCC->APB1LPENR |= (RCC_APB1LPENR_SPI3LPEN)) -#define __HAL_RCC_USART2_CLK_SLEEP_ENABLE() (RCC->APB1LPENR |= (RCC_APB1LPENR_USART2LPEN)) -#define __HAL_RCC_USART3_CLK_SLEEP_ENABLE() (RCC->APB1LPENR |= (RCC_APB1LPENR_USART3LPEN)) -#define __HAL_RCC_UART4_CLK_SLEEP_ENABLE() (RCC->APB1LPENR |= (RCC_APB1LPENR_UART4LPEN)) -#define __HAL_RCC_UART5_CLK_SLEEP_ENABLE() (RCC->APB1LPENR |= (RCC_APB1LPENR_UART5LPEN)) -#define __HAL_RCC_I2C1_CLK_SLEEP_ENABLE() (RCC->APB1LPENR |= (RCC_APB1LPENR_I2C1LPEN)) -#define __HAL_RCC_I2C2_CLK_SLEEP_ENABLE() (RCC->APB1LPENR |= (RCC_APB1LPENR_I2C2LPEN)) -#define __HAL_RCC_I2C3_CLK_SLEEP_ENABLE() (RCC->APB1LPENR |= (RCC_APB1LPENR_I2C3LPEN)) -#define __HAL_RCC_CAN1_CLK_SLEEP_ENABLE() (RCC->APB1LPENR |= (RCC_APB1LPENR_CAN1LPEN)) -#define __HAL_RCC_DAC_CLK_SLEEP_ENABLE() (RCC->APB1LPENR |= (RCC_APB1LPENR_DACLPEN)) -#define __HAL_RCC_UART7_CLK_SLEEP_ENABLE() (RCC->APB1LPENR |= (RCC_APB1LPENR_UART7LPEN)) -#define __HAL_RCC_UART8_CLK_SLEEP_ENABLE() (RCC->APB1LPENR |= (RCC_APB1LPENR_UART8LPEN)) - -#define __HAL_RCC_TIM2_CLK_SLEEP_DISABLE() (RCC->APB1LPENR &= ~(RCC_APB1LPENR_TIM2LPEN)) -#define __HAL_RCC_TIM3_CLK_SLEEP_DISABLE() (RCC->APB1LPENR &= ~(RCC_APB1LPENR_TIM3LPEN)) -#define __HAL_RCC_TIM4_CLK_SLEEP_DISABLE() (RCC->APB1LPENR &= ~(RCC_APB1LPENR_TIM4LPEN)) -#define __HAL_RCC_TIM5_CLK_SLEEP_DISABLE() (RCC->APB1LPENR &= ~(RCC_APB1LPENR_TIM5LPEN)) -#define __HAL_RCC_TIM6_CLK_SLEEP_DISABLE() (RCC->APB1LPENR &= ~(RCC_APB1LPENR_TIM6LPEN)) -#define __HAL_RCC_TIM7_CLK_SLEEP_DISABLE() (RCC->APB1LPENR &= ~(RCC_APB1LPENR_TIM7LPEN)) -#define __HAL_RCC_TIM12_CLK_SLEEP_DISABLE() (RCC->APB1LPENR &= ~(RCC_APB1LPENR_TIM12LPEN)) -#define __HAL_RCC_TIM13_CLK_SLEEP_DISABLE() (RCC->APB1LPENR &= ~(RCC_APB1LPENR_TIM13LPEN)) -#define __HAL_RCC_TIM14_CLK_SLEEP_DISABLE() (RCC->APB1LPENR &= ~(RCC_APB1LPENR_TIM14LPEN)) -#define __HAL_RCC_LPTIM1_CLK_SLEEP_DISABLE() (RCC->APB1LPENR &= ~(RCC_APB1LPENR_LPTIM1LPEN)) -#if defined (STM32F765xx) || defined (STM32F767xx) || defined (STM32F769xx) || defined (STM32F777xx) || defined (STM32F779xx) -#define __HAL_RCC_CAN3_CLK_SLEEP_DISABLE() (RCC->APB1LPENR &= ~(RCC_APB1LPENR_CAN3LPEN)) -#endif /* STM32F767xx || STM32F769xx || STM32F777xx || STM32F779xx */ -#define __HAL_RCC_SPI2_CLK_SLEEP_DISABLE() (RCC->APB1LPENR &= ~(RCC_APB1LPENR_SPI2LPEN)) -#define __HAL_RCC_SPI3_CLK_SLEEP_DISABLE() (RCC->APB1LPENR &= ~(RCC_APB1LPENR_SPI3LPEN)) -#define __HAL_RCC_USART2_CLK_SLEEP_DISABLE() (RCC->APB1LPENR &= ~(RCC_APB1LPENR_USART2LPEN)) -#define __HAL_RCC_USART3_CLK_SLEEP_DISABLE() (RCC->APB1LPENR &= ~(RCC_APB1LPENR_USART3LPEN)) -#define __HAL_RCC_UART4_CLK_SLEEP_DISABLE() (RCC->APB1LPENR &= ~(RCC_APB1LPENR_UART4LPEN)) -#define __HAL_RCC_UART5_CLK_SLEEP_DISABLE() (RCC->APB1LPENR &= ~(RCC_APB1LPENR_UART5LPEN)) -#define __HAL_RCC_I2C1_CLK_SLEEP_DISABLE() (RCC->APB1LPENR &= ~(RCC_APB1LPENR_I2C1LPEN)) -#define __HAL_RCC_I2C2_CLK_SLEEP_DISABLE() (RCC->APB1LPENR &= ~(RCC_APB1LPENR_I2C2LPEN)) -#define __HAL_RCC_I2C3_CLK_SLEEP_DISABLE() (RCC->APB1LPENR &= ~(RCC_APB1LPENR_I2C3LPEN)) -#define __HAL_RCC_CAN1_CLK_SLEEP_DISABLE() (RCC->APB1LPENR &= ~(RCC_APB1LPENR_CAN1LPEN)) -#define __HAL_RCC_DAC_CLK_SLEEP_DISABLE() (RCC->APB1LPENR &= ~(RCC_APB1LPENR_DACLPEN)) -#define __HAL_RCC_UART7_CLK_SLEEP_DISABLE() (RCC->APB1LPENR &= ~(RCC_APB1LPENR_UART7LPEN)) -#define __HAL_RCC_UART8_CLK_SLEEP_DISABLE() (RCC->APB1LPENR &= ~(RCC_APB1LPENR_UART8LPEN)) - -#if defined (STM32F722xx) || defined (STM32F723xx) || defined (STM32F732xx) || defined (STM32F733xx) ||\ - defined (STM32F765xx) || defined (STM32F767xx) || defined (STM32F769xx) || defined (STM32F777xx) ||\ - defined (STM32F779xx) || defined (STM32F730xx) -#define __HAL_RCC_RTC_CLK_SLEEP_ENABLE() (RCC->APB1LPENR |= (RCC_APB1LPENR_RTCLPEN)) -#define __HAL_RCC_RTC_CLK_SLEEP_DISABLE() (RCC->APB1LPENR &= ~(RCC_APB1LPENR_RTCLPEN)) -#endif /* STM32F722xx || STM32F723xx || STM32F732xx || STM32F733xx || STM32F765xx || STM32F767xx || - STM32F769xx || STM32F777xx || STM32F779xx || STM32F730xx */ - -#if defined (STM32F745xx) || defined (STM32F746xx) || defined (STM32F756xx) || defined (STM32F765xx) ||\ - defined (STM32F767xx) || defined (STM32F769xx) || defined (STM32F777xx) || defined (STM32F779xx) ||\ - defined (STM32F750xx) -#define __HAL_RCC_SPDIFRX_CLK_SLEEP_ENABLE() (RCC->APB1LPENR |= (RCC_APB1LPENR_SPDIFRXLPEN)) -#define __HAL_RCC_I2C4_CLK_SLEEP_ENABLE() (RCC->APB1LPENR |= (RCC_APB1LPENR_I2C4LPEN)) -#define __HAL_RCC_CAN2_CLK_SLEEP_ENABLE() (RCC->APB1LPENR |= (RCC_APB1LPENR_CAN2LPEN)) -#define __HAL_RCC_CEC_CLK_SLEEP_ENABLE() (RCC->APB1LPENR |= (RCC_APB1LPENR_CECLPEN)) - -#define __HAL_RCC_SPDIFRX_CLK_SLEEP_DISABLE()(RCC->APB1LPENR &= ~(RCC_APB1LPENR_SPDIFRXLPEN)) -#define __HAL_RCC_I2C4_CLK_SLEEP_DISABLE() (RCC->APB1LPENR &= ~(RCC_APB1LPENR_I2C4LPEN)) -#define __HAL_RCC_CAN2_CLK_SLEEP_DISABLE() (RCC->APB1LPENR &= ~(RCC_APB1LPENR_CAN2LPEN)) -#define __HAL_RCC_CEC_CLK_SLEEP_DISABLE() (RCC->APB1LPENR &= ~(RCC_APB1LPENR_CECLPEN)) -#endif /* STM32F745xx || STM32F746xx || STM32F756xx || STM32F765xx || STM32F767xx || STM32F769xx || STM32F777xx || STM32F779xx || STM32F750xx */ - -/** @brief Enable or disable the APB2 peripheral clock during Low Power (Sleep) mode. - * @note Peripheral clock gating in SLEEP mode can be used to further reduce - * power consumption. - * @note After wakeup from SLEEP mode, the peripheral clock is enabled again. - * @note By default, all peripheral clocks are enabled during SLEEP mode. - */ -#define __HAL_RCC_TIM1_CLK_SLEEP_ENABLE() (RCC->APB2LPENR |= (RCC_APB2LPENR_TIM1LPEN)) -#define __HAL_RCC_TIM8_CLK_SLEEP_ENABLE() (RCC->APB2LPENR |= (RCC_APB2LPENR_TIM8LPEN)) -#define __HAL_RCC_USART1_CLK_SLEEP_ENABLE() (RCC->APB2LPENR |= (RCC_APB2LPENR_USART1LPEN)) -#define __HAL_RCC_USART6_CLK_SLEEP_ENABLE() (RCC->APB2LPENR |= (RCC_APB2LPENR_USART6LPEN)) -#define __HAL_RCC_ADC1_CLK_SLEEP_ENABLE() (RCC->APB2LPENR |= (RCC_APB2LPENR_ADC1LPEN)) -#define __HAL_RCC_ADC2_CLK_SLEEP_ENABLE() (RCC->APB2LPENR |= (RCC_APB2LPENR_ADC2LPEN)) -#define __HAL_RCC_ADC3_CLK_SLEEP_ENABLE() (RCC->APB2LPENR |= (RCC_APB2LPENR_ADC3LPEN)) -#define __HAL_RCC_SDMMC1_CLK_SLEEP_ENABLE() (RCC->APB2LPENR |= (RCC_APB2LPENR_SDMMC1LPEN)) -#define __HAL_RCC_SPI1_CLK_SLEEP_ENABLE() (RCC->APB2LPENR |= (RCC_APB2LPENR_SPI1LPEN)) -#define __HAL_RCC_SPI4_CLK_SLEEP_ENABLE() (RCC->APB2LPENR |= (RCC_APB2LPENR_SPI4LPEN)) -#define __HAL_RCC_TIM9_CLK_SLEEP_ENABLE() (RCC->APB2LPENR |= (RCC_APB2LPENR_TIM9LPEN)) -#define __HAL_RCC_TIM10_CLK_SLEEP_ENABLE() (RCC->APB2LPENR |= (RCC_APB2LPENR_TIM10LPEN)) -#define __HAL_RCC_TIM11_CLK_SLEEP_ENABLE() (RCC->APB2LPENR |= (RCC_APB2LPENR_TIM11LPEN)) -#define __HAL_RCC_SPI5_CLK_SLEEP_ENABLE() (RCC->APB2LPENR |= (RCC_APB2LPENR_SPI5LPEN)) -#define __HAL_RCC_SAI1_CLK_SLEEP_ENABLE() (RCC->APB2LPENR |= (RCC_APB2LPENR_SAI1LPEN)) -#define __HAL_RCC_SAI2_CLK_SLEEP_ENABLE() (RCC->APB2LPENR |= (RCC_APB2LPENR_SAI2LPEN)) -#if defined (STM32F746xx) || defined (STM32F756xx) || defined (STM32F767xx) || defined (STM32F769xx) || defined (STM32F777xx) || defined (STM32F779xx) || defined (STM32F750xx) -#define __HAL_RCC_LTDC_CLK_SLEEP_ENABLE() (RCC->APB2LPENR |= (RCC_APB2LPENR_LTDCLPEN)) -#endif /* STM32F746xx || STM32F756xx || STM32F767xx || STM32F769xx || STM32F777xx || STM32F779xx || STM32F750xx */ - -#define __HAL_RCC_TIM1_CLK_SLEEP_DISABLE() (RCC->APB2LPENR &= ~(RCC_APB2LPENR_TIM1LPEN)) -#define __HAL_RCC_TIM8_CLK_SLEEP_DISABLE() (RCC->APB2LPENR &= ~(RCC_APB2LPENR_TIM8LPEN)) -#define __HAL_RCC_USART1_CLK_SLEEP_DISABLE() (RCC->APB2LPENR &= ~(RCC_APB2LPENR_USART1LPEN)) -#define __HAL_RCC_USART6_CLK_SLEEP_DISABLE() (RCC->APB2LPENR &= ~(RCC_APB2LPENR_USART6LPEN)) -#define __HAL_RCC_ADC1_CLK_SLEEP_DISABLE() (RCC->APB2LPENR &= ~(RCC_APB2LPENR_ADC1LPEN)) -#define __HAL_RCC_ADC2_CLK_SLEEP_DISABLE() (RCC->APB2LPENR &= ~(RCC_APB2LPENR_ADC2LPEN)) -#define __HAL_RCC_ADC3_CLK_SLEEP_DISABLE() (RCC->APB2LPENR &= ~(RCC_APB2LPENR_ADC3LPEN)) -#define __HAL_RCC_SDMMC1_CLK_SLEEP_DISABLE() (RCC->APB2LPENR &= ~(RCC_APB2LPENR_SDMMC1LPEN)) -#define __HAL_RCC_SPI1_CLK_SLEEP_DISABLE() (RCC->APB2LPENR &= ~(RCC_APB2LPENR_SPI1LPEN)) -#define __HAL_RCC_SPI4_CLK_SLEEP_DISABLE() (RCC->APB2LPENR &= ~(RCC_APB2LPENR_SPI4LPEN)) -#define __HAL_RCC_TIM9_CLK_SLEEP_DISABLE() (RCC->APB2LPENR &= ~(RCC_APB2LPENR_TIM9LPEN)) -#define __HAL_RCC_TIM10_CLK_SLEEP_DISABLE() (RCC->APB2LPENR &= ~(RCC_APB2LPENR_TIM10LPEN)) -#define __HAL_RCC_TIM11_CLK_SLEEP_DISABLE() (RCC->APB2LPENR &= ~(RCC_APB2LPENR_TIM11LPEN)) -#define __HAL_RCC_SPI5_CLK_SLEEP_DISABLE() (RCC->APB2LPENR &= ~(RCC_APB2LPENR_SPI5LPEN)) -#define __HAL_RCC_SAI1_CLK_SLEEP_DISABLE() (RCC->APB2LPENR &= ~(RCC_APB2LPENR_SAI1LPEN)) -#define __HAL_RCC_SAI2_CLK_SLEEP_DISABLE() (RCC->APB2LPENR &= ~(RCC_APB2LPENR_SAI2LPEN)) -#if defined (STM32F746xx) || defined (STM32F756xx) || defined (STM32F767xx) || defined (STM32F769xx) || defined (STM32F777xx) || defined (STM32F779xx)|| defined (STM32F750xx) -#define __HAL_RCC_LTDC_CLK_SLEEP_DISABLE() (RCC->APB2LPENR &= ~(RCC_APB2LPENR_LTDCLPEN)) -#endif /* STM32F746xx || STM32F756xx || STM32F767xx || STM32F769xx || STM32F777xx || STM32F779xx || STM32F750xx */ -#if defined (STM32F769xx) || defined (STM32F779xx) -#define __HAL_RCC_DSI_CLK_SLEEP_ENABLE() (RCC->APB2LPENR |= (RCC_APB2LPENR_DSILPEN)) -#define __HAL_RCC_DSI_CLK_SLEEP_DISABLE() (RCC->APB2LPENR &= ~(RCC_APB2LPENR_DSILPEN)) -#endif /* STM32F769xx || STM32F779xx */ -#if defined (STM32F765xx) || defined (STM32F767xx) || defined (STM32F769xx) || defined (STM32F777xx) || defined (STM32F779xx) -#define __HAL_RCC_DFSDM1_CLK_SLEEP_ENABLE() (RCC->APB2LPENR |= (RCC_APB2LPENR_DFSDM1LPEN)) -#define __HAL_RCC_MDIO_CLK_SLEEP_ENABLE() (RCC->APB2LPENR |= (RCC_APB2LPENR_MDIOLPEN)) -#define __HAL_RCC_DFSDM1_CLK_SLEEP_DISABLE() (RCC->APB2LPENR &= ~(RCC_APB2LPENR_DFSDM1LPEN)) -#define __HAL_RCC_MDIO_CLK_SLEEP_DISABLE() (RCC->APB2LPENR &= ~(RCC_APB2LPENR_MDIOLPEN)) -#endif /* STM32F767xx || STM32F769xx || STM32F777xx || STM32F779xx */ -#if defined (STM32F722xx) || defined (STM32F723xx) || defined (STM32F732xx) || defined (STM32F733xx) || defined (STM32F765xx) ||\ - defined (STM32F767xx) || defined (STM32F769xx) || defined (STM32F777xx) || defined (STM32F779xx) || defined (STM32F730xx) -#define __HAL_RCC_SDMMC2_CLK_SLEEP_ENABLE() (RCC->APB2LPENR |= (RCC_APB2LPENR_SDMMC2LPEN)) -#define __HAL_RCC_SDMMC2_CLK_SLEEP_DISABLE() (RCC->APB2LPENR &= ~(RCC_APB2LPENR_SDMMC2LPEN)) -#endif /* STM32F722xx || STM32F723xx || STM32F732xx || STM32F733xx || STM32F765xx || STM32F767xx || STM32F769xx || STM32F777xx || STM32F779xx || STM32F730xx */ - -#if defined (STM32F745xx) || defined (STM32F746xx) || defined (STM32F756xx) || defined (STM32F765xx) ||\ - defined (STM32F767xx) || defined (STM32F769xx) || defined (STM32F777xx) || defined (STM32F779xx) ||\ - defined (STM32F750xx) -#define __HAL_RCC_SPI6_CLK_SLEEP_ENABLE() (RCC->APB2LPENR |= (RCC_APB2LPENR_SPI6LPEN)) -#define __HAL_RCC_SPI6_CLK_SLEEP_DISABLE() (RCC->APB2LPENR &= ~(RCC_APB2LPENR_SPI6LPEN)) -#endif /* STM32F745xx || STM32F746xx || STM32F756xx || STM32F765xx || STM32F767xx || STM32F769xx || STM32F777xx || STM32F779xx || STM32F750xx */ -/** - * @} - */ - -/** @defgroup RCC_Clock_Sleep_Enable_Disable_Status AHB/APB Peripheral Clock Sleep Enable Disable Status - * @brief Get the enable or disable status of the AHB/APB peripheral clock during Low Power (Sleep) mode. - * @note Peripheral clock gating in SLEEP mode can be used to further reduce - * power consumption. - * @note After wakeup from SLEEP mode, the peripheral clock is enabled again. - * @note By default, all peripheral clocks are enabled during SLEEP mode. - * @{ - */ - -/** @brief Get the enable or disable status of the AHB1 peripheral clock during Low Power (Sleep) mode. - * @note Peripheral clock gating in SLEEP mode can be used to further reduce - * power consumption. - * @note After wakeup from SLEEP mode, the peripheral clock is enabled again. - * @note By default, all peripheral clocks are enabled during SLEEP mode. - */ -#define __HAL_RCC_FLITF_IS_CLK_SLEEP_ENABLED() ((RCC->AHB1LPENR & (RCC_AHB1LPENR_FLITFLPEN)) != RESET) -#define __HAL_RCC_AXI_IS_CLK_SLEEP_ENABLED() ((RCC->AHB1LPENR & (RCC_AHB1LPENR_AXILPEN)) != RESET) -#define __HAL_RCC_SRAM1_IS_CLK_SLEEP_ENABLED() ((RCC->AHB1LPENR & (RCC_AHB1LPENR_SRAM1LPEN)) != RESET) -#define __HAL_RCC_SRAM2_IS_CLK_SLEEP_ENABLED() ((RCC->AHB1LPENR & (RCC_AHB1LPENR_SRAM2LPEN)) != RESET) -#define __HAL_RCC_BKPSRAM_IS_CLK_SLEEP_ENABLED() ((RCC->AHB1LPENR & (RCC_AHB1LPENR_BKPSRAMLPEN)) != RESET) -#define __HAL_RCC_DTCM_IS_CLK_SLEEP_ENABLED() ((RCC->AHB1LPENR & (RCC_AHB1LPENR_DTCMLPEN)) != RESET) -#define __HAL_RCC_DMA2_IS_CLK_SLEEP_ENABLED() ((RCC->AHB1LPENR & (RCC_AHB1LPENR_DMA2LPEN)) != RESET) -#define __HAL_RCC_USB_OTG_HS_IS_CLK_SLEEP_ENABLED() ((RCC->AHB1LPENR & (RCC_AHB1LPENR_OTGHSLPEN)) != RESET) -#define __HAL_RCC_USB_OTG_HS_ULPI_IS_CLK_SLEEP_ENABLED() ((RCC->AHB1LPENR & (RCC_AHB1LPENR_OTGHSULPILPEN)) != RESET) -#define __HAL_RCC_GPIOA_IS_CLK_SLEEP_ENABLED() ((RCC->AHB1LPENR & (RCC_AHB1LPENR_GPIOALPEN)) != RESET) -#define __HAL_RCC_GPIOB_IS_CLK_SLEEP_ENABLED() ((RCC->AHB1LPENR & (RCC_AHB1LPENR_GPIOBLPEN)) != RESET) -#define __HAL_RCC_GPIOC_IS_CLK_SLEEP_ENABLED() ((RCC->AHB1LPENR & (RCC_AHB1LPENR_GPIOCLPEN)) != RESET) -#define __HAL_RCC_GPIOD_IS_CLK_SLEEP_ENABLED() ((RCC->AHB1LPENR & (RCC_AHB1LPENR_GPIODLPEN)) != RESET) -#define __HAL_RCC_GPIOE_IS_CLK_SLEEP_ENABLED() ((RCC->AHB1LPENR & (RCC_AHB1LPENR_GPIOELPEN)) != RESET) -#define __HAL_RCC_GPIOF_IS_CLK_SLEEP_ENABLED() ((RCC->AHB1LPENR & (RCC_AHB1LPENR_GPIOFLPEN)) != RESET) -#define __HAL_RCC_GPIOG_IS_CLK_SLEEP_ENABLED() ((RCC->AHB1LPENR & (RCC_AHB1LPENR_GPIOGLPEN)) != RESET) -#define __HAL_RCC_GPIOH_IS_CLK_SLEEP_ENABLED() ((RCC->AHB1LPENR & (RCC_AHB1LPENR_GPIOHLPEN)) != RESET) -#define __HAL_RCC_GPIOI_IS_CLK_SLEEP_ENABLED() ((RCC->AHB1LPENR & (RCC_AHB1LPENR_GPIOILPEN)) != RESET) - -#define __HAL_RCC_FLITF_IS_CLK_SLEEP_DISABLED() ((RCC->AHB1LPENR & (RCC_AHB1LPENR_FLITFLPEN)) == RESET) -#define __HAL_RCC_AXI_IS_CLK_SLEEP_DISABLED() ((RCC->AHB1LPENR & (RCC_AHB1LPENR_AXILPEN)) == RESET) -#define __HAL_RCC_SRAM1_IS_CLK_SLEEP_DISABLED() ((RCC->AHB1LPENR & (RCC_AHB1LPENR_SRAM1LPEN)) == RESET) -#define __HAL_RCC_SRAM2_IS_CLK_SLEEP_DISABLED() ((RCC->AHB1LPENR & (RCC_AHB1LPENR_SRAM2LPEN)) == RESET) -#define __HAL_RCC_BKPSRAM_IS_CLK_SLEEP_DISABLED() ((RCC->AHB1LPENR & (RCC_AHB1LPENR_BKPSRAMLPEN)) == RESET) -#define __HAL_RCC_DTCM_IS_CLK_SLEEP_DISABLED() ((RCC->AHB1LPENR & (RCC_AHB1LPENR_DTCMLPEN)) == RESET) -#define __HAL_RCC_DMA2_IS_CLK_SLEEP_DISABLED() ((RCC->AHB1LPENR & (RCC_AHB1LPENR_DMA2LPEN)) == RESET) -#define __HAL_RCC_USB_OTG_HS_IS_CLK_SLEEP_DISABLED() ((RCC->AHB1LPENR & (RCC_AHB1LPENR_OTGHSLPEN)) == RESET) -#define __HAL_RCC_USB_OTG_HS_ULPI_IS_CLK_SLEEP_DISABLED() ((RCC->AHB1LPENR & (RCC_AHB1LPENR_OTGHSULPILPEN)) == RESET) -#define __HAL_RCC_GPIOA_IS_CLK_SLEEP_DISABLED() ((RCC->AHB1LPENR & (RCC_AHB1LPENR_GPIOALPEN)) == RESET) -#define __HAL_RCC_GPIOB_IS_CLK_SLEEP_DISABLED() ((RCC->AHB1LPENR & (RCC_AHB1LPENR_GPIOBLPEN)) == RESET) -#define __HAL_RCC_GPIOC_IS_CLK_SLEEP_DISABLED() ((RCC->AHB1LPENR & (RCC_AHB1LPENR_GPIOCLPEN)) == RESET) -#define __HAL_RCC_GPIOD_IS_CLK_SLEEP_DISABLED() ((RCC->AHB1LPENR & (RCC_AHB1LPENR_GPIODLPEN)) == RESET) -#define __HAL_RCC_GPIOE_IS_CLK_SLEEP_DISABLED() ((RCC->AHB1LPENR & (RCC_AHB1LPENR_GPIOELPEN)) == RESET) -#define __HAL_RCC_GPIOF_IS_CLK_SLEEP_DISABLED() ((RCC->AHB1LPENR & (RCC_AHB1LPENR_GPIOFLPEN)) == RESET) -#define __HAL_RCC_GPIOG_IS_CLK_SLEEP_DISABLED() ((RCC->AHB1LPENR & (RCC_AHB1LPENR_GPIOGLPEN)) == RESET) -#define __HAL_RCC_GPIOH_IS_CLK_SLEEP_DISABLED() ((RCC->AHB1LPENR & (RCC_AHB1LPENR_GPIOHLPEN)) == RESET) -#define __HAL_RCC_GPIOI_IS_CLK_SLEEP_DISABLED() ((RCC->AHB1LPENR & (RCC_AHB1LPENR_GPIOILPEN)) == RESET) - -#if defined (STM32F745xx) || defined (STM32F746xx) || defined (STM32F756xx) || defined (STM32F765xx) ||\ - defined (STM32F767xx) || defined (STM32F769xx) || defined (STM32F777xx) || defined (STM32F779xx) ||\ - defined (STM32F750xx) -#define __HAL_RCC_DMA2D_IS_CLK_SLEEP_ENABLED() ((RCC->AHB1LPENR & (RCC_AHB1LPENR_DMA2DLPEN)) != RESET) -#define __HAL_RCC_ETHMAC_IS_CLK_SLEEP_ENABLED() ((RCC->AHB1LPENR & (RCC_AHB1LPENR_ETHMACLPEN)) != RESET) -#define __HAL_RCC_ETHMACTX_IS_CLK_SLEEP_ENABLED() ((RCC->AHB1LPENR & (RCC_AHB1LPENR_ETHMACTXLPEN)) != RESET) -#define __HAL_RCC_ETHMACRX_IS_CLK_SLEEP_ENABLED() ((RCC->AHB1LPENR & (RCC_AHB1LPENR_ETHMACRXLPEN)) != RESET) -#define __HAL_RCC_ETHMACPTP_IS_CLK_SLEEP_ENABLED() ((RCC->AHB1LPENR & (RCC_AHB1LPENR_ETHMACPTPLPEN)) != RESET) -#define __HAL_RCC_GPIOJ_IS_CLK_SLEEP_ENABLED() ((RCC->AHB1LPENR & (RCC_AHB1LPENR_GPIOJLPEN)) != RESET) -#define __HAL_RCC_GPIOK_IS_CLK_SLEEP_ENABLED() ((RCC->AHB1LPENR & (RCC_AHB1LPENR_GPIOKLPEN)) != RESET) - -#define __HAL_RCC_DMA2D_IS_CLK_SLEEP_DISABLED() ((RCC->AHB1LPENR & (RCC_AHB1LPENR_DMA2DLPEN)) == RESET) -#define __HAL_RCC_ETHMAC_IS_CLK_SLEEP_DISABLED() ((RCC->AHB1LPENR & (RCC_AHB1LPENR_ETHMACLPEN)) == RESET) -#define __HAL_RCC_ETHMACTX_IS_CLK_SLEEP_DISABLED() ((RCC->AHB1LPENR & (RCC_AHB1LPENR_ETHMACTXLPEN)) == RESET) -#define __HAL_RCC_ETHMACRX_IS_CLK_SLEEP_DISABLED() ((RCC->AHB1LPENR & (RCC_AHB1LPENR_ETHMACRXLPEN)) == RESET) -#define __HAL_RCC_ETHMACPTP_IS_CLK_SLEEP_DISABLED() ((RCC->AHB1LPENR & (RCC_AHB1LPENR_ETHMACPTPLPEN)) == RESET) -#define __HAL_RCC_GPIOJ_IS_CLK_SLEEP_DISABLED() ((RCC->AHB1LPENR & (RCC_AHB1LPENR_GPIOJLPEN)) == RESET) -#define __HAL_RCC_GPIOK_IS_CLK_SLEEP_DISABLED() ((RCC->AHB1LPENR & (RCC_AHB1LPENR_GPIOKLPEN)) == RESET) -#endif /* STM32F745xx || STM32F746xx || STM32F756xx || STM32F765xx || STM32F767xx || STM32F769xx || STM32F777xx || STM32F779xx || STM32F750xx */ - -/** @brief Get the enable or disable status of the AHB2 peripheral clock during Low Power (Sleep) mode. - * @note Peripheral clock gating in SLEEP mode can be used to further reduce - * power consumption. - * @note After wakeup from SLEEP mode, the peripheral clock is enabled again. - * @note By default, all peripheral clocks are enabled during SLEEP mode. - */ -#if defined (STM32F745xx) || defined (STM32F746xx) || defined (STM32F756xx) || defined (STM32F765xx) ||\ - defined (STM32F767xx) || defined (STM32F769xx) || defined (STM32F777xx) || defined (STM32F779xx) ||\ - defined (STM32F750xx) -#define __HAL_RCC_DCMI_IS_CLK_SLEEP_ENABLED() ((RCC->AHB2LPENR & (RCC_AHB2LPENR_DCMILPEN)) != RESET) -#define __HAL_RCC_DCMI_IS_CLK_SLEEP_DISABLED() ((RCC->AHB2LPENR & (RCC_AHB2LPENR_DCMILPEN)) == RESET) -#endif /* STM32F745xx || STM32F746xx || STM32F756xx || STM32F765xx || STM32F767xx || STM32F769xx || STM32F777xx || STM32F779xx || STM32F750xx */ - -#if defined(STM32F767xx) || defined(STM32F769xx) || defined (STM32F777xx) || defined (STM32F779xx) -#define __HAL_RCC_JPEG_IS_CLK_SLEEP_ENABLED() ((RCC->AHB2LPENR & (RCC_AHB2LPENR_JPEGLPEN)) != RESET) -#define __HAL_RCC_JPEG_IS_CLK_SLEEP_DISABLED() ((RCC->AHB2LPENR & (RCC_AHB2LPENR_JPEGLPEN)) == RESET) -#endif /* STM32F767xx || STM32F769xx || STM32F777xx || STM32F779xx */ - -#define __HAL_RCC_RNG_IS_CLK_SLEEP_ENABLED() ((RCC->AHB2LPENR & (RCC_AHB2LPENR_RNGLPEN)) != RESET) -#define __HAL_RCC_RNG_IS_CLK_SLEEP_DISABLED() ((RCC->AHB2LPENR & (RCC_AHB2LPENR_RNGLPEN)) == RESET) - -#define __HAL_RCC_USB_OTG_FS_IS_CLK_SLEEP_ENABLED() ((RCC->AHB2LPENR & (RCC_AHB2LPENR_OTGFSLPEN)) != RESET) -#define __HAL_RCC_USB_OTG_FS_IS_CLK_SLEEP_DISABLED() ((RCC->AHB2LPENR & (RCC_AHB2LPENR_OTGFSLPEN)) == RESET) - -#if defined(STM32F756xx) || defined (STM32F777xx) || defined (STM32F779xx) || defined (STM32F750xx) -#define __HAL_RCC_CRYP_IS_CLK_SLEEP_ENABLED() ((RCC->AHB2LPENR & (RCC_AHB2LPENR_CRYPLPEN)) != RESET) -#define __HAL_RCC_HASH_IS_CLK_SLEEP_ENABLED() ((RCC->AHB2LPENR & (RCC_AHB2LPENR_HASHLPEN)) != RESET) - -#define __HAL_RCC_CRYP_IS_CLK_SLEEP_DISABLED() ((RCC->AHB2LPENR & (RCC_AHB2LPENR_CRYPLPEN)) == RESET) -#define __HAL_RCC_HASH_IS_CLK_SLEEP_DISABLED() ((RCC->AHB2LPENR & (RCC_AHB2LPENR_HASHLPEN)) == RESET) -#endif /* STM32F756xx || STM32F777xx || STM32F779xx || STM32F750xx */ - -#if defined(STM32F732xx) || defined (STM32F733xx) || defined (STM32F730xx) -#define __HAL_RCC_AES_IS_CLK_SLEEP_ENABLED() ((RCC->AHB2LPENR & (RCC_AHB2LPENR_AESLPEN)) != RESET) -#define __HAL_RCC_AES_IS_CLK_SLEEP_DISABLED() ((RCC->AHB2LPENR & (RCC_AHB2LPENR_AESLPEN)) == RESET) -#endif /* STM32F732xx || STM32F733xx || STM32F730xx */ - -/** @brief Get the enable or disable status of the AHB3 peripheral clock during Low Power (Sleep) mode. - * @note Peripheral clock gating in SLEEP mode can be used to further reduce - * power consumption. - * @note After wakeup from SLEEP mode, the peripheral clock is enabled again. - * @note By default, all peripheral clocks are enabled during SLEEP mode. - */ -#define __HAL_RCC_FMC_IS_CLK_SLEEP_ENABLED() ((RCC->AHB3LPENR & (RCC_AHB3LPENR_FMCLPEN)) != RESET) -#define __HAL_RCC_FMC_IS_CLK_SLEEP_DISABLED() ((RCC->AHB3LPENR & (RCC_AHB3LPENR_FMCLPEN)) == RESET) - -#define __HAL_RCC_QSPI_IS_CLK_SLEEP_ENABLED() ((RCC->AHB3LPENR & (RCC_AHB3LPENR_QSPILPEN)) != RESET) -#define __HAL_RCC_QSPI_IS_CLK_SLEEP_DISABLED() ((RCC->AHB3LPENR & (RCC_AHB3LPENR_QSPILPEN)) == RESET) - -/** @brief Get the enable or disable status of the APB1 peripheral clock during Low Power (Sleep) mode. - * @note Peripheral clock gating in SLEEP mode can be used to further reduce - * power consumption. - * @note After wakeup from SLEEP mode, the peripheral clock is enabled again. - * @note By default, all peripheral clocks are enabled during SLEEP mode. - */ -#define __HAL_RCC_TIM2_IS_CLK_SLEEP_ENABLED() ((RCC->APB1LPENR & (RCC_APB1LPENR_TIM2LPEN)) != RESET) -#define __HAL_RCC_TIM3_IS_CLK_SLEEP_ENABLED() ((RCC->APB1LPENR & (RCC_APB1LPENR_TIM3LPEN)) != RESET) -#define __HAL_RCC_TIM4_IS_CLK_SLEEP_ENABLED() ((RCC->APB1LPENR & (RCC_APB1LPENR_TIM4LPEN)) != RESET) -#define __HAL_RCC_TIM5_IS_CLK_SLEEP_ENABLED() ((RCC->APB1LPENR & (RCC_APB1LPENR_TIM5LPEN)) != RESET) -#define __HAL_RCC_TIM6_IS_CLK_SLEEP_ENABLED() ((RCC->APB1LPENR & (RCC_APB1LPENR_TIM6LPEN)) != RESET) -#define __HAL_RCC_TIM7_IS_CLK_SLEEP_ENABLED() ((RCC->APB1LPENR & (RCC_APB1LPENR_TIM7LPEN)) != RESET) -#define __HAL_RCC_TIM12_IS_CLK_SLEEP_ENABLED() ((RCC->APB1LPENR & (RCC_APB1LPENR_TIM12LPEN)) != RESET) -#define __HAL_RCC_TIM13_IS_CLK_SLEEP_ENABLED() ((RCC->APB1LPENR & (RCC_APB1LPENR_TIM13LPEN)) != RESET) -#define __HAL_RCC_TIM14_IS_CLK_SLEEP_ENABLED() ((RCC->APB1LPENR & (RCC_APB1LPENR_TIM14LPEN)) != RESET) -#define __HAL_RCC_LPTIM1_IS_CLK_SLEEP_ENABLED() ((RCC->APB1LPENR & (RCC_APB1LPENR_LPTIM1LPEN)) != RESET) -#if defined (STM32F722xx) || defined (STM32F723xx) || defined (STM32F732xx) || defined (STM32F733xx) ||\ - defined (STM32F765xx) || defined (STM32F767xx) || defined (STM32F769xx) || defined (STM32F777xx) ||\ - defined (STM32F779xx) || defined (STM32F730xx) -#define __HAL_RCC_RTC_IS_CLK_SLEEP_ENABLED() ((RCC->APB1LPENR & (RCC_APB1LPENR_RTCLPEN)) != RESET) -#endif /* STM32F722xx || STM32F723xx || STM32F732xx || STM32F733xx || STM32F765xx || STM32F767xx || - STM32F769xx || STM32F777xx || STM32F779xx || STM32F730xx */ -#if defined (STM32F765xx) || defined (STM32F767xx) || defined (STM32F769xx) || defined (STM32F777xx) || defined (STM32F779xx) -#define __HAL_RCC_CAN3_IS_CLK_SLEEP_ENABLED() ((RCC->APB1LPENR & (RCC_APB1LPENR_CAN3LPEN)) != RESET) -#endif /* STM32F767xx || STM32F769xx || STM32F777xx || STM32F779xx */ -#define __HAL_RCC_SPI2_IS_CLK_SLEEP_ENABLED() ((RCC->APB1LPENR & (RCC_APB1LPENR_SPI2LPEN)) != RESET) -#define __HAL_RCC_SPI3_IS_CLK_SLEEP_ENABLED() ((RCC->APB1LPENR & (RCC_APB1LPENR_SPI3LPEN)) != RESET) -#define __HAL_RCC_USART2_IS_CLK_SLEEP_ENABLED() ((RCC->APB1LPENR & (RCC_APB1LPENR_USART2LPEN)) != RESET) -#define __HAL_RCC_USART3_IS_CLK_SLEEP_ENABLED() ((RCC->APB1LPENR & (RCC_APB1LPENR_USART3LPEN)) != RESET) -#define __HAL_RCC_UART4_IS_CLK_SLEEP_ENABLED() ((RCC->APB1LPENR & (RCC_APB1LPENR_UART4LPEN)) != RESET) -#define __HAL_RCC_UART5_IS_CLK_SLEEP_ENABLED() ((RCC->APB1LPENR & (RCC_APB1LPENR_UART5LPEN)) != RESET) -#define __HAL_RCC_I2C1_IS_CLK_SLEEP_ENABLED() ((RCC->APB1LPENR & (RCC_APB1LPENR_I2C1LPEN)) != RESET) -#define __HAL_RCC_I2C2_IS_CLK_SLEEP_ENABLED() ((RCC->APB1LPENR & (RCC_APB1LPENR_I2C2LPEN)) != RESET) -#define __HAL_RCC_I2C3_IS_CLK_SLEEP_ENABLED() ((RCC->APB1LPENR & (RCC_APB1LPENR_I2C3LPEN)) != RESET) -#define __HAL_RCC_CAN1_IS_CLK_SLEEP_ENABLED() ((RCC->APB1LPENR & (RCC_APB1LPENR_CAN1LPEN)) != RESET) -#define __HAL_RCC_DAC_IS_CLK_SLEEP_ENABLED() ((RCC->APB1LPENR & (RCC_APB1LPENR_DACLPEN)) != RESET) -#define __HAL_RCC_UART7_IS_CLK_SLEEP_ENABLED() ((RCC->APB1LPENR & (RCC_APB1LPENR_UART7LPEN)) != RESET) -#define __HAL_RCC_UART8_IS_CLK_SLEEP_ENABLED() ((RCC->APB1LPENR & (RCC_APB1LPENR_UART8LPEN)) != RESET) - -#define __HAL_RCC_TIM2_IS_CLK_SLEEP_DISABLED() ((RCC->APB1LPENR & (RCC_APB1LPENR_TIM2LPEN)) == RESET) -#define __HAL_RCC_TIM3_IS_CLK_SLEEP_DISABLED() ((RCC->APB1LPENR & (RCC_APB1LPENR_TIM3LPEN)) == RESET) -#define __HAL_RCC_TIM4_IS_CLK_SLEEP_DISABLED() ((RCC->APB1LPENR & (RCC_APB1LPENR_TIM4LPEN)) == RESET) -#define __HAL_RCC_TIM5_IS_CLK_SLEEP_DISABLED() ((RCC->APB1LPENR & (RCC_APB1LPENR_TIM5LPEN)) == RESET) -#define __HAL_RCC_TIM6_IS_CLK_SLEEP_DISABLED() ((RCC->APB1LPENR & (RCC_APB1LPENR_TIM6LPEN)) == RESET) -#define __HAL_RCC_TIM7_IS_CLK_SLEEP_DISABLED() ((RCC->APB1LPENR & (RCC_APB1LPENR_TIM7LPEN)) == RESET) -#define __HAL_RCC_TIM12_IS_CLK_SLEEP_DISABLED() ((RCC->APB1LPENR & (RCC_APB1LPENR_TIM12LPEN)) == RESET) -#define __HAL_RCC_TIM13_IS_CLK_SLEEP_DISABLED() ((RCC->APB1LPENR & (RCC_APB1LPENR_TIM13LPEN)) == RESET) -#define __HAL_RCC_TIM14_IS_CLK_SLEEP_DISABLED() ((RCC->APB1LPENR & (RCC_APB1LPENR_TIM14LPEN)) == RESET) -#define __HAL_RCC_LPTIM1_IS_CLK_SLEEP_DISABLED() ((RCC->APB1LPENR & (RCC_APB1LPENR_LPTIM1LPEN)) == RESET) -#if defined (STM32F722xx) || defined (STM32F723xx) || defined (STM32F732xx) || defined (STM32F733xx) ||\ - defined (STM32F765xx) || defined (STM32F767xx) || defined (STM32F769xx) || defined (STM32F777xx) ||\ - defined (STM32F779xx) || defined (STM32F730xx) -#define __HAL_RCC_RTC_IS_CLK_SLEEP_DISABLED() ((RCC->APB1LPENR & (RCC_APB1LPENR_RTCLPEN)) == RESET) -#endif /* STM32F722xx || STM32F723xx || STM32F732xx || STM32F733xx || STM32F765xx || STM32F767xx || - STM32F769xx || STM32F777xx || STM32F779xx || STM32F730xx */ -#if defined (STM32F765xx) || defined (STM32F767xx) || defined (STM32F769xx) || defined (STM32F777xx) || defined (STM32F779xx) -#define __HAL_RCC_CAN3_IS_CLK_SLEEP_DISABLED() ((RCC->APB1LPENR & (RCC_APB1LPENR_CAN3LPEN)) == RESET) -#endif /* STM32F767xx || STM32F769xx || STM32F777xx || STM32F779xx */ -#define __HAL_RCC_SPI2_IS_CLK_SLEEP_DISABLED() ((RCC->APB1LPENR & (RCC_APB1LPENR_SPI2LPEN)) == RESET) -#define __HAL_RCC_SPI3_IS_CLK_SLEEP_DISABLED() ((RCC->APB1LPENR & (RCC_APB1LPENR_SPI3LPEN)) == RESET) -#define __HAL_RCC_USART2_IS_CLK_SLEEP_DISABLED() ((RCC->APB1LPENR & (RCC_APB1LPENR_USART2LPEN)) == RESET) -#define __HAL_RCC_USART3_IS_CLK_SLEEP_DISABLED() ((RCC->APB1LPENR & (RCC_APB1LPENR_USART3LPEN)) == RESET) -#define __HAL_RCC_UART4_IS_CLK_SLEEP_DISABLED() ((RCC->APB1LPENR & (RCC_APB1LPENR_UART4LPEN)) == RESET) -#define __HAL_RCC_UART5_IS_CLK_SLEEP_DISABLED() ((RCC->APB1LPENR & (RCC_APB1LPENR_UART5LPEN)) == RESET) -#define __HAL_RCC_I2C1_IS_CLK_SLEEP_DISABLED() ((RCC->APB1LPENR & (RCC_APB1LPENR_I2C1LPEN)) == RESET) -#define __HAL_RCC_I2C2_IS_CLK_SLEEP_DISABLED() ((RCC->APB1LPENR & (RCC_APB1LPENR_I2C2LPEN)) == RESET) -#define __HAL_RCC_I2C3_IS_CLK_SLEEP_DISABLED() ((RCC->APB1LPENR & (RCC_APB1LPENR_I2C3LPEN)) == RESET) -#define __HAL_RCC_CAN1_IS_CLK_SLEEP_DISABLED() ((RCC->APB1LPENR & (RCC_APB1LPENR_CAN1LPEN)) == RESET) -#define __HAL_RCC_DAC_IS_CLK_SLEEP_DISABLED() ((RCC->APB1LPENR & (RCC_APB1LPENR_DACLPEN)) == RESET) -#define __HAL_RCC_UART7_IS_CLK_SLEEP_DISABLED() ((RCC->APB1LPENR & (RCC_APB1LPENR_UART7LPEN)) == RESET) -#define __HAL_RCC_UART8_IS_CLK_SLEEP_DISABLED() ((RCC->APB1LPENR & (RCC_APB1LPENR_UART8LPEN)) == RESET) - -#if defined (STM32F745xx) || defined (STM32F746xx) || defined (STM32F756xx) || defined (STM32F765xx) ||\ - defined (STM32F767xx) || defined (STM32F769xx) || defined (STM32F777xx) || defined (STM32F779xx) ||\ - defined (STM32F750xx) -#define __HAL_RCC_SPDIFRX_IS_CLK_SLEEP_ENABLED() ((RCC->APB1LPENR & (RCC_APB1LPENR_SPDIFRXLPEN)) != RESET) -#define __HAL_RCC_I2C4_IS_CLK_SLEEP_ENABLED() ((RCC->APB1LPENR & (RCC_APB1LPENR_I2C4LPEN)) != RESET) -#define __HAL_RCC_CAN2_IS_CLK_SLEEP_ENABLED() ((RCC->APB1LPENR & (RCC_APB1LPENR_CAN2LPEN)) != RESET) -#define __HAL_RCC_CEC_IS_CLK_SLEEP_ENABLED() ((RCC->APB1LPENR & (RCC_APB1LPENR_CECLPEN)) != RESET) - -#define __HAL_RCC_SPDIFRX_IS_CLK_SLEEP_DISABLED()((RCC->APB1LPENR & (RCC_APB1LPENR_SPDIFRXLPEN)) == RESET) -#define __HAL_RCC_I2C4_IS_CLK_SLEEP_DISABLED() ((RCC->APB1LPENR & (RCC_APB1LPENR_I2C4LPEN)) == RESET) -#define __HAL_RCC_CAN2_IS_CLK_SLEEP_DISABLED() ((RCC->APB1LPENR & (RCC_APB1LPENR_CAN2LPEN)) == RESET) -#define __HAL_RCC_CEC_IS_CLK_SLEEP_DISABLED() ((RCC->APB1LPENR & (RCC_APB1LPENR_CECLPEN)) == RESET) -#endif /* STM32F745xx || STM32F746xx || STM32F756xx || STM32F765xx || STM32F767xx || STM32F769xx || STM32F777xx || STM32F779xx || STM32F750xx */ - -/** @brief Get the enable or disable status of the APB2 peripheral clock during Low Power (Sleep) mode. - * @note Peripheral clock gating in SLEEP mode can be used to further reduce - * power consumption. - * @note After wakeup from SLEEP mode, the peripheral clock is enabled again. - * @note By default, all peripheral clocks are enabled during SLEEP mode. - */ -#define __HAL_RCC_TIM1_IS_CLK_SLEEP_ENABLED() ((RCC->APB2LPENR & (RCC_APB2LPENR_TIM1LPEN)) != RESET) -#define __HAL_RCC_TIM8_IS_CLK_SLEEP_ENABLED() ((RCC->APB2LPENR & (RCC_APB2LPENR_TIM8LPEN)) != RESET) -#define __HAL_RCC_USART1_IS_CLK_SLEEP_ENABLED() ((RCC->APB2LPENR & (RCC_APB2LPENR_USART1LPEN)) != RESET) -#define __HAL_RCC_USART6_IS_CLK_SLEEP_ENABLED() ((RCC->APB2LPENR & (RCC_APB2LPENR_USART6LPEN)) != RESET) -#define __HAL_RCC_ADC1_IS_CLK_SLEEP_ENABLED() ((RCC->APB2LPENR & (RCC_APB2LPENR_ADC1LPEN)) != RESET) -#define __HAL_RCC_ADC2_IS_CLK_SLEEP_ENABLED() ((RCC->APB2LPENR & (RCC_APB2LPENR_ADC2LPEN)) != RESET) -#define __HAL_RCC_ADC3_IS_CLK_SLEEP_ENABLED() ((RCC->APB2LPENR & (RCC_APB2LPENR_ADC3LPEN)) != RESET) -#define __HAL_RCC_SDMMC1_IS_CLK_SLEEP_ENABLED() ((RCC->APB2LPENR & (RCC_APB2LPENR_SDMMC1LPEN)) != RESET) -#define __HAL_RCC_SPI1_IS_CLK_SLEEP_ENABLED() ((RCC->APB2LPENR & (RCC_APB2LPENR_SPI1LPEN)) != RESET) -#define __HAL_RCC_SPI4_IS_CLK_SLEEP_ENABLED() ((RCC->APB2LPENR & (RCC_APB2LPENR_SPI4LPEN)) != RESET) -#define __HAL_RCC_TIM9_IS_CLK_SLEEP_ENABLED() ((RCC->APB2LPENR & (RCC_APB2LPENR_TIM9LPEN)) != RESET) -#define __HAL_RCC_TIM10_IS_CLK_SLEEP_ENABLED() ((RCC->APB2LPENR & (RCC_APB2LPENR_TIM10LPEN)) != RESET) -#define __HAL_RCC_TIM11_IS_CLK_SLEEP_ENABLED() ((RCC->APB2LPENR & (RCC_APB2LPENR_TIM11LPEN)) != RESET) -#define __HAL_RCC_SPI5_IS_CLK_SLEEP_ENABLED() ((RCC->APB2LPENR & (RCC_APB2LPENR_SPI5LPEN)) != RESET) -#define __HAL_RCC_SAI1_IS_CLK_SLEEP_ENABLED() ((RCC->APB2LPENR & (RCC_APB2LPENR_SAI1LPEN)) != RESET) -#define __HAL_RCC_SAI2_IS_CLK_SLEEP_ENABLED() ((RCC->APB2LPENR & (RCC_APB2LPENR_SAI2LPEN)) != RESET) -#if defined (STM32F746xx) || defined (STM32F756xx) || defined (STM32F767xx) || defined (STM32F769xx) || defined (STM32F777xx) || defined (STM32F779xx) || defined (STM32F750xx) -#define __HAL_RCC_LTDC_IS_CLK_SLEEP_ENABLED() ((RCC->APB2LPENR & (RCC_APB2LPENR_LTDCLPEN)) != RESET) -#endif /* STM32F746xx || STM32F756xx || STM32F767xx || STM32F769xx || STM32F777xx || STM32F779xx || STM32F750xx */ -#if defined (STM32F769xx) || defined (STM32F779xx) -#define __HAL_RCC_DSI_IS_CLK_SLEEP_ENABLED() ((RCC->APB2LPENR & (RCC_APB2LPENR_DSILPEN)) != RESET) -#endif /* STM32F769xx || STM32F779xx */ -#if defined (STM32F722xx) || defined (STM32F723xx) || defined (STM32F732xx) || defined (STM32F733xx) || defined (STM32F765xx) ||\ - defined (STM32F767xx) || defined (STM32F769xx) || defined (STM32F777xx) || defined (STM32F779xx) || defined (STM32F730xx) -#define __HAL_RCC_SDMMC2_IS_CLK_SLEEP_ENABLED() ((RCC->APB2LPENR & (RCC_APB2LPENR_SDMMC2LPEN)) != RESET) -#endif /* STM32F722xx || STM32F723xx || STM32F732xx || STM32F733xx || STM32F765xx || STM32F767xx || STM32F769xx || STM32F777xx || STM32F779xx || STM32F730xx */ -#if defined (STM32F765xx) || defined (STM32F767xx) || defined (STM32F769xx) || defined (STM32F777xx) || defined (STM32F779xx) -#define __HAL_RCC_DFSDM1_IS_CLK_SLEEP_ENABLED() ((RCC->APB2LPENR & (RCC_APB2LPENR_DFSDM1LPEN)) != RESET) -#define __HAL_RCC_MDIO_IS_CLK_SLEEP_ENABLED() ((RCC->APB2LPENR & (RCC_APB2LPENR_MDIOLPEN)) != RESET) -#endif /* STM32F767xx || STM32F769xx || STM32F777xx || STM32F779xx */ - -#define __HAL_RCC_TIM1_IS_CLK_SLEEP_DISABLED() ((RCC->APB2LPENR & (RCC_APB2LPENR_TIM1LPEN)) == RESET) -#define __HAL_RCC_TIM8_IS_CLK_SLEEP_DISABLED() ((RCC->APB2LPENR & (RCC_APB2LPENR_TIM8LPEN)) == RESET) -#define __HAL_RCC_USART1_IS_CLK_SLEEP_DISABLED() ((RCC->APB2LPENR & (RCC_APB2LPENR_USART1LPEN)) == RESET) -#define __HAL_RCC_USART6_IS_CLK_SLEEP_DISABLED() ((RCC->APB2LPENR & (RCC_APB2LPENR_USART6LPEN)) == RESET) -#define __HAL_RCC_ADC1_IS_CLK_SLEEP_DISABLED() ((RCC->APB2LPENR & (RCC_APB2LPENR_ADC1LPEN)) == RESET) -#define __HAL_RCC_ADC2_IS_CLK_SLEEP_DISABLED() ((RCC->APB2LPENR & (RCC_APB2LPENR_ADC2LPEN)) == RESET) -#define __HAL_RCC_ADC3_IS_CLK_SLEEP_DISABLED() ((RCC->APB2LPENR & (RCC_APB2LPENR_ADC3LPEN)) == RESET) -#define __HAL_RCC_SDMMC1_IS_CLK_SLEEP_DISABLED() ((RCC->APB2LPENR & (RCC_APB2LPENR_SDMMC1LPEN)) == RESET) -#define __HAL_RCC_SPI1_IS_CLK_SLEEP_DISABLED() ((RCC->APB2LPENR & (RCC_APB2LPENR_SPI1LPEN)) == RESET) -#define __HAL_RCC_SPI4_IS_CLK_SLEEP_DISABLED() ((RCC->APB2LPENR & (RCC_APB2LPENR_SPI4LPEN)) == RESET) -#define __HAL_RCC_TIM9_IS_CLK_SLEEP_DISABLED() ((RCC->APB2LPENR & (RCC_APB2LPENR_TIM9LPEN)) == RESET) -#define __HAL_RCC_TIM10_IS_CLK_SLEEP_DISABLED() ((RCC->APB2LPENR & (RCC_APB2LPENR_TIM10LPEN)) == RESET) -#define __HAL_RCC_TIM11_IS_CLK_SLEEP_DISABLED() ((RCC->APB2LPENR & (RCC_APB2LPENR_TIM11LPEN)) == RESET) -#define __HAL_RCC_SPI5_IS_CLK_SLEEP_DISABLED() ((RCC->APB2LPENR & (RCC_APB2LPENR_SPI5LPEN)) == RESET) -#define __HAL_RCC_SAI1_IS_CLK_SLEEP_DISABLED() ((RCC->APB2LPENR & (RCC_APB2LPENR_SAI1LPEN)) == RESET) -#define __HAL_RCC_SAI2_IS_CLK_SLEEP_DISABLED() ((RCC->APB2LPENR & (RCC_APB2LPENR_SAI2LPEN)) == RESET) -#if defined (STM32F746xx) || defined (STM32F756xx) || defined (STM32F767xx) || defined (STM32F769xx) || defined (STM32F777xx) || defined (STM32F779xx) || defined (STM32F750xx) -#define __HAL_RCC_LTDC_IS_CLK_SLEEP_DISABLED() ((RCC->APB2LPENR & (RCC_APB2LPENR_LTDCLPEN)) == RESET) -#endif /* STM32F746xx || STM32F756xx || STM32F767xx || STM32F769xx || STM32F777xx || STM32F779xx || STM32F750xx */ -#if defined (STM32F769xx) || defined (STM32F779xx) -#define __HAL_RCC_DSI_IS_CLK_SLEEP_DISABLED() ((RCC->APB2LPENR & (RCC_APB2LPENR_DSILPEN)) == RESET) -#endif /* STM32F769xx || STM32F779xx */ -#if defined (STM32F722xx) || defined (STM32F723xx) || defined (STM32F732xx) || defined (STM32F733xx) || defined (STM32F765xx) ||\ - defined (STM32F767xx) || defined (STM32F769xx) || defined (STM32F777xx) || defined (STM32F779xx) || defined (STM32F730xx) -#define __HAL_RCC_SDMMC2_IS_CLK_SLEEP_DISABLED() ((RCC->APB2LPENR & (RCC_APB2LPENR_SDMMC2LPEN)) == RESET) -#endif /* STM32F722xx || STM32F723xx || STM32F732xx || STM32F733xx || STM32F765xx || STM32F767xx || STM32F769xx || STM32F777xx || STM32F779xx || STM32F730xx */ -#if defined (STM32F765xx) || defined (STM32F767xx) || defined (STM32F769xx) || defined (STM32F777xx) || defined (STM32F779xx) -#define __HAL_RCC_DFSDM1_IS_CLK_SLEEP_DISABLED() ((RCC->APB2LPENR & (RCC_APB2LPENR_DFSDM1LPEN)) == RESET) -#define __HAL_RCC_MDIO_IS_CLK_SLEEP_DISABLED() ((RCC->APB2LPENR & (RCC_APB2LPENR_MDIOLPEN)) == RESET) -#endif /* STM32F767xx || STM32F769xx || STM32F777xx || STM32F779xx */ - -#if defined (STM32F745xx) || defined (STM32F746xx) || defined (STM32F756xx) || defined (STM32F765xx) ||\ - defined (STM32F767xx) || defined (STM32F769xx) || defined (STM32F777xx) || defined (STM32F779xx) ||\ - defined (STM32F750xx) -#define __HAL_RCC_SPI6_IS_CLK_SLEEP_ENABLED() ((RCC->APB2LPENR & (RCC_APB2LPENR_SPI6LPEN)) != RESET) -#define __HAL_RCC_SPI6_IS_CLK_SLEEP_DISABLED() ((RCC->APB2LPENR & (RCC_APB2LPENR_SPI6LPEN)) == RESET) -#endif /* STM32F745xx || STM32F746xx || STM32F756xx || STM32F765xx || STM32F767xx || STM32F769xx || STM32F777xx || STM32F779xx || STM32F750xx */ -/** - * @} - */ - -/*------------------------------- PLL Configuration --------------------------*/ -#if defined (STM32F765xx) || defined (STM32F767xx) || defined (STM32F769xx) || defined (STM32F777xx) || defined (STM32F779xx) -/** @brief Macro to configure the main PLL clock source, multiplication and division factors. - * @note This function must be used only when the main PLL is disabled. - * @param __RCC_PLLSource__ specifies the PLL entry clock source. - * This parameter can be one of the following values: - * @arg RCC_PLLSOURCE_HSI: HSI oscillator clock selected as PLL clock entry - * @arg RCC_PLLSOURCE_HSE: HSE oscillator clock selected as PLL clock entry - * @note This clock source (RCC_PLLSource) is common for the main PLL and PLLI2S. - * @param __PLLM__ specifies the division factor for PLL VCO input clock - * This parameter must be a number between Min_Data = 2 and Max_Data = 63. - * @note You have to set the PLLM parameter correctly to ensure that the VCO input - * frequency ranges from 1 to 2 MHz. It is recommended to select a frequency - * of 2 MHz to limit PLL jitter. - * @param __PLLN__ specifies the multiplication factor for PLL VCO output clock - * This parameter must be a number between Min_Data = 50 and Max_Data = 432. - * @note You have to set the PLLN parameter correctly to ensure that the VCO - * output frequency is between 100 and 432 MHz. - * @param __PLLP__ specifies the division factor for main system clock (SYSCLK) - * This parameter must be a number in the range {2, 4, 6, or 8}. - * @note You have to set the PLLP parameter correctly to not exceed 216 MHz on - * the System clock frequency. - * @param __PLLQ__ specifies the division factor for OTG FS, SDMMC and RNG clocks - * This parameter must be a number between Min_Data = 2 and Max_Data = 15. - * @note If the USB OTG FS is used in your application, you have to set the - * PLLQ parameter correctly to have 48 MHz clock for the USB. However, - * the SDMMC and RNG need a frequency lower than or equal to 48 MHz to work - * correctly. - * @param __PLLR__ specifies the division factor for DSI clock - * This parameter must be a number between Min_Data = 2 and Max_Data = 7. - */ -#define __HAL_RCC_PLL_CONFIG(__RCC_PLLSource__, __PLLM__, __PLLN__, __PLLP__, __PLLQ__,__PLLR__) \ - (RCC->PLLCFGR = ((__RCC_PLLSource__) | (__PLLM__) | \ - ((__PLLN__) << RCC_PLLCFGR_PLLN_Pos) | \ - ((((__PLLP__) >> 1) -1) << RCC_PLLCFGR_PLLP_Pos) | \ - ((__PLLQ__) << RCC_PLLCFGR_PLLQ_Pos) | \ - ((__PLLR__) << RCC_PLLCFGR_PLLR_Pos))) -#else -/** @brief Macro to configure the main PLL clock source, multiplication and division factors. - * @note This function must be used only when the main PLL is disabled. - * @param __RCC_PLLSource__ specifies the PLL entry clock source. - * This parameter can be one of the following values: - * @arg RCC_PLLSOURCE_HSI: HSI oscillator clock selected as PLL clock entry - * @arg RCC_PLLSOURCE_HSE: HSE oscillator clock selected as PLL clock entry - * @note This clock source (RCC_PLLSource) is common for the main PLL and PLLI2S. - * @param __PLLM__ specifies the division factor for PLL VCO input clock - * This parameter must be a number between Min_Data = 2 and Max_Data = 63. - * @note You have to set the PLLM parameter correctly to ensure that the VCO input - * frequency ranges from 1 to 2 MHz. It is recommended to select a frequency - * of 2 MHz to limit PLL jitter. - * @param __PLLN__ specifies the multiplication factor for PLL VCO output clock - * This parameter must be a number between Min_Data = 50 and Max_Data = 432. - * @note You have to set the PLLN parameter correctly to ensure that the VCO - * output frequency is between 100 and 432 MHz. - * @param __PLLP__ specifies the division factor for main system clock (SYSCLK) - * This parameter must be a number in the range {2, 4, 6, or 8}. - * @note You have to set the PLLP parameter correctly to not exceed 216 MHz on - * the System clock frequency. - * @param __PLLQ__ specifies the division factor for OTG FS, SDMMC and RNG clocks - * This parameter must be a number between Min_Data = 2 and Max_Data = 15. - * @note If the USB OTG FS is used in your application, you have to set the - * PLLQ parameter correctly to have 48 MHz clock for the USB. However, - * the SDMMC and RNG need a frequency lower than or equal to 48 MHz to work - * correctly. - */ -#define __HAL_RCC_PLL_CONFIG(__RCC_PLLSource__, __PLLM__, __PLLN__, __PLLP__, __PLLQ__) \ - (RCC->PLLCFGR = (0x20000000 | (__RCC_PLLSource__) | (__PLLM__)| \ - ((__PLLN__) << RCC_PLLCFGR_PLLN_Pos) | \ - ((((__PLLP__) >> 1) -1) << RCC_PLLCFGR_PLLP_Pos) | \ - ((__PLLQ__) << RCC_PLLCFGR_PLLQ_Pos))) -#endif /* STM32F767xx || STM32F769xx || STM32F777xx || STM32F779xx */ -/*---------------------------------------------------------------------------------------------*/ - -/** @brief Macro to configure the Timers clocks prescalers - * @param __PRESC__ specifies the Timers clocks prescalers selection - * This parameter can be one of the following values: - * @arg RCC_TIMPRES_DESACTIVATED: The Timers kernels clocks prescaler is - * equal to HPRE if PPREx is corresponding to division by 1 or 2, - * else it is equal to [(HPRE * PPREx) / 2] if PPREx is corresponding to - * division by 4 or more. - * @arg RCC_TIMPRES_ACTIVATED: The Timers kernels clocks prescaler is - * equal to HPRE if PPREx is corresponding to division by 1, 2 or 4, - * else it is equal to [(HPRE * PPREx) / 4] if PPREx is corresponding - * to division by 8 or more. - */ -#define __HAL_RCC_TIMCLKPRESCALER(__PRESC__) do {RCC->DCKCFGR1 &= ~(RCC_DCKCFGR1_TIMPRE);\ - RCC->DCKCFGR1 |= (__PRESC__); \ - }while(0) - -/** @brief Macros to Enable or Disable the PLLISAI. - * @note The PLLSAI is disabled by hardware when entering STOP and STANDBY modes. - */ -#define __HAL_RCC_PLLSAI_ENABLE() (RCC->CR |= (RCC_CR_PLLSAION)) -#define __HAL_RCC_PLLSAI_DISABLE() (RCC->CR &= ~(RCC_CR_PLLSAION)) - -#if defined (STM32F722xx) || defined (STM32F723xx) || defined (STM32F732xx) || defined (STM32F733xx) || defined (STM32F730xx) -/** @brief Macro to configure the PLLSAI clock multiplication and division factors. - * @note This function must be used only when the PLLSAI is disabled. - * @note PLLSAI clock source is common with the main PLL (configured in - * RCC_PLLConfig function ) - * @param __PLLSAIN__ specifies the multiplication factor for PLLSAI VCO output clock. - * This parameter must be a number between Min_Data = 50 and Max_Data = 432. - * @note You have to set the PLLSAIN parameter correctly to ensure that the VCO - * output frequency is between Min_Data = 100 and Max_Data = 432 MHz. - * @param __PLLSAIP__ specifies the division factor for USB, RNG, SDMMC clocks - * This parameter can be a value of @ref RCCEx_PLLSAIP_Clock_Divider. - * @param __PLLSAIQ__ specifies the division factor for SAI clock - * This parameter must be a number between Min_Data = 2 and Max_Data = 15. - */ -#define __HAL_RCC_PLLSAI_CONFIG(__PLLSAIN__, __PLLSAIP__, __PLLSAIQ__) \ - (RCC->PLLSAICFGR = ((__PLLSAIN__) << RCC_PLLSAICFGR_PLLSAIN_Pos) |\ - ((__PLLSAIP__) << RCC_PLLSAICFGR_PLLSAIP_Pos) |\ - ((__PLLSAIQ__) << RCC_PLLSAICFGR_PLLSAIQ_Pos)) - -/** @brief Macro to configure the PLLI2S clock multiplication and division factors. - * @note This macro must be used only when the PLLI2S is disabled. - * @note PLLI2S clock source is common with the main PLL (configured in - * HAL_RCC_ClockConfig() API) - * @param __PLLI2SN__ specifies the multiplication factor for PLLI2S VCO output clock. - * This parameter must be a number between Min_Data = 50 and Max_Data = 432. - * @note You have to set the PLLI2SN parameter correctly to ensure that the VCO - * output frequency is between Min_Data = 100 and Max_Data = 432 MHz. - * @param __PLLI2SQ__ specifies the division factor for SAI clock. - * This parameter must be a number between Min_Data = 2 and Max_Data = 15. - * @param __PLLI2SR__ specifies the division factor for I2S clock - * This parameter must be a number between Min_Data = 2 and Max_Data = 7. - * @note You have to set the PLLI2SR parameter correctly to not exceed 192 MHz - * on the I2S clock frequency. - */ -#define __HAL_RCC_PLLI2S_CONFIG(__PLLI2SN__, __PLLI2SQ__, __PLLI2SR__) \ - (RCC->PLLI2SCFGR = ((__PLLI2SN__) << RCC_PLLI2SCFGR_PLLI2SN_Pos) |\ - ((__PLLI2SQ__) << RCC_PLLI2SCFGR_PLLI2SQ_Pos) |\ - ((__PLLI2SR__) << RCC_PLLI2SCFGR_PLLI2SR_Pos)) -#else -/** @brief Macro to configure the PLLSAI clock multiplication and division factors. - * @note This function must be used only when the PLLSAI is disabled. - * @note PLLSAI clock source is common with the main PLL (configured in - * RCC_PLLConfig function ) - * @param __PLLSAIN__ specifies the multiplication factor for PLLSAI VCO output clock. - * This parameter must be a number between Min_Data = 50 and Max_Data = 432. - * @note You have to set the PLLSAIN parameter correctly to ensure that the VCO - * output frequency is between Min_Data = 100 and Max_Data = 432 MHz. - * @param __PLLSAIP__ specifies the division factor for USB, RNG, SDMMC clocks - * This parameter can be a value of @ref RCCEx_PLLSAIP_Clock_Divider. - * @param __PLLSAIQ__ specifies the division factor for SAI clock - * This parameter must be a number between Min_Data = 2 and Max_Data = 15. - * @param __PLLSAIR__ specifies the division factor for LTDC clock - * This parameter must be a number between Min_Data = 2 and Max_Data = 7. - */ -#define __HAL_RCC_PLLSAI_CONFIG(__PLLSAIN__, __PLLSAIP__, __PLLSAIQ__, __PLLSAIR__) \ - (RCC->PLLSAICFGR = ((__PLLSAIN__) << RCC_PLLSAICFGR_PLLSAIN_Pos) |\ - ((__PLLSAIP__) << RCC_PLLSAICFGR_PLLSAIP_Pos) |\ - ((__PLLSAIQ__) << RCC_PLLSAICFGR_PLLSAIQ_Pos) |\ - ((__PLLSAIR__) << RCC_PLLSAICFGR_PLLSAIR_Pos)) - -/** @brief Macro to configure the PLLI2S clock multiplication and division factors. - * @note This macro must be used only when the PLLI2S is disabled. - * @note PLLI2S clock source is common with the main PLL (configured in - * HAL_RCC_ClockConfig() API) - * @param __PLLI2SN__ specifies the multiplication factor for PLLI2S VCO output clock. - * This parameter must be a number between Min_Data = 50 and Max_Data = 432. - * @note You have to set the PLLI2SN parameter correctly to ensure that the VCO - * output frequency is between Min_Data = 100 and Max_Data = 432 MHz. - * @param __PLLI2SP__ specifies the division factor for SPDDIF-RX clock. - * This parameter can be a value of @ref RCCEx_PLLI2SP_Clock_Divider. - * @param __PLLI2SQ__ specifies the division factor for SAI clock. - * This parameter must be a number between Min_Data = 2 and Max_Data = 15. - * @param __PLLI2SR__ specifies the division factor for I2S clock - * This parameter must be a number between Min_Data = 2 and Max_Data = 7. - * @note You have to set the PLLI2SR parameter correctly to not exceed 192 MHz - * on the I2S clock frequency. - */ -#define __HAL_RCC_PLLI2S_CONFIG(__PLLI2SN__, __PLLI2SP__, __PLLI2SQ__, __PLLI2SR__) \ - (RCC->PLLI2SCFGR = ((__PLLI2SN__) << RCC_PLLI2SCFGR_PLLI2SN_Pos) |\ - ((__PLLI2SP__) << RCC_PLLI2SCFGR_PLLI2SP_Pos) |\ - ((__PLLI2SQ__) << RCC_PLLI2SCFGR_PLLI2SQ_Pos) |\ - ((__PLLI2SR__) << RCC_PLLI2SCFGR_PLLI2SR_Pos)) -#endif /* STM32F722xx || STM32F723xx || STM32F732xx || STM32F733xx || STM32F730xx */ - -/** @brief Macro to configure the SAI clock Divider coming from PLLI2S. - * @note This function must be called before enabling the PLLI2S. - * @param __PLLI2SDivQ__ specifies the PLLI2S division factor for SAI1 clock . - * This parameter must be a number between 1 and 32. - * SAI1 clock frequency = f(PLLI2SQ) / __PLLI2SDivQ__ - */ -#define __HAL_RCC_PLLI2S_PLLSAICLKDIVQ_CONFIG(__PLLI2SDivQ__) (MODIFY_REG(RCC->DCKCFGR1, RCC_DCKCFGR1_PLLI2SDIVQ, (__PLLI2SDivQ__)-1)) - -/** @brief Macro to configure the SAI clock Divider coming from PLLSAI. - * @note This function must be called before enabling the PLLSAI. - * @param __PLLSAIDivQ__ specifies the PLLSAI division factor for SAI1 clock . - * This parameter must be a number between Min_Data = 1 and Max_Data = 32. - * SAI1 clock frequency = f(PLLSAIQ) / __PLLSAIDivQ__ - */ -#define __HAL_RCC_PLLSAI_PLLSAICLKDIVQ_CONFIG(__PLLSAIDivQ__) (MODIFY_REG(RCC->DCKCFGR1, RCC_DCKCFGR1_PLLSAIDIVQ, ((__PLLSAIDivQ__)-1)<<8)) - -#if defined (STM32F745xx) || defined (STM32F746xx) || defined (STM32F756xx) || defined (STM32F765xx) ||\ - defined (STM32F767xx) || defined (STM32F769xx) || defined (STM32F777xx) || defined (STM32F779xx) ||\ - defined (STM32F750xx) -/** @brief Macro to configure the LTDC clock Divider coming from PLLSAI. - * @note This function must be called before enabling the PLLSAI. - * @param __PLLSAIDivR__ specifies the PLLSAI division factor for LTDC clock . - * This parameter can be a value of @ref RCCEx_PLLSAI_DIVR. - * LTDC clock frequency = f(PLLSAIR) / __PLLSAIDivR__ - */ -#define __HAL_RCC_PLLSAI_PLLSAICLKDIVR_CONFIG(__PLLSAIDivR__)\ - MODIFY_REG(RCC->DCKCFGR1, RCC_DCKCFGR1_PLLSAIDIVR, (uint32_t)(__PLLSAIDivR__)) -#endif /* STM32F745xx || STM32F746xx || STM32F756xx || STM32F765xx || STM32F767xx || STM32F769xx || STM32F777xx || STM32F779xx || STM32F750xx */ - -/** @brief Macro to configure SAI1 clock source selection. - * @note This function must be called before enabling PLLSAI, PLLI2S and - * the SAI clock. - * @param __SOURCE__ specifies the SAI1 clock source. - * This parameter can be one of the following values: - * @arg RCC_SAI1CLKSOURCE_PLLI2S: PLLI2S_Q clock divided by PLLI2SDIVQ used - * as SAI1 clock. - * @arg RCC_SAI1CLKSOURCE_PLLSAI: PLLISAI_Q clock divided by PLLSAIDIVQ used - * as SAI1 clock. - * @arg RCC_SAI1CLKSOURCE_PIN: External clock mapped on the I2S_CKIN pin - * used as SAI1 clock. - * @arg RCC_SAI1CLKSOURCE_PLLSRC: HSI or HSE depending from PLL Source clock - * used as SAI1 clock. - * @note The RCC_SAI1CLKSOURCE_PLLSRC value is only available with STM32F767/769/777/779xx Devices - */ -#define __HAL_RCC_SAI1_CONFIG(__SOURCE__)\ - MODIFY_REG(RCC->DCKCFGR1, RCC_DCKCFGR1_SAI1SEL, (uint32_t)(__SOURCE__)) - -/** @brief Macro to get the SAI1 clock source. - * @retval The clock source can be one of the following values: - * @arg RCC_SAI1CLKSOURCE_PLLI2S: PLLI2S_Q clock divided by PLLI2SDIVQ used - * as SAI1 clock. - * @arg RCC_SAI1CLKSOURCE_PLLSAI: PLLISAI_Q clock divided by PLLSAIDIVQ used - * as SAI1 clock. - * @arg RCC_SAI1CLKSOURCE_PIN: External clock mapped on the I2S_CKIN pin - * used as SAI1 clock. - * @arg RCC_SAI1CLKSOURCE_PLLSRC: HSI or HSE depending from PLL Source clock - * used as SAI1 clock. - * @note The RCC_SAI1CLKSOURCE_PLLSRC value is only available with STM32F767/769/777/779xx Devices - */ -#define __HAL_RCC_GET_SAI1_SOURCE() ((uint32_t)(READ_BIT(RCC->DCKCFGR1, RCC_DCKCFGR1_SAI1SEL))) - -/** @brief Macro to configure SAI2 clock source selection. - * @note This function must be called before enabling PLLSAI, PLLI2S and - * the SAI clock. - * @param __SOURCE__ specifies the SAI2 clock source. - * This parameter can be one of the following values: - * @arg RCC_SAI2CLKSOURCE_PLLI2S: PLLI2S_Q clock divided by PLLI2SDIVQ used - * as SAI2 clock. - * @arg RCC_SAI2CLKSOURCE_PLLSAI: PLLISAI_Q clock divided by PLLSAIDIVQ used - * as SAI2 clock. - * @arg RCC_SAI2CLKSOURCE_PIN: External clock mapped on the I2S_CKIN pin - * used as SAI2 clock. - * @arg RCC_SAI2CLKSOURCE_PLLSRC: HSI or HSE depending from PLL Source clock - * used as SAI2 clock. - * @note The RCC_SAI2CLKSOURCE_PLLSRC value is only available with STM32F767/769/777/779xx Devices - */ -#define __HAL_RCC_SAI2_CONFIG(__SOURCE__)\ - MODIFY_REG(RCC->DCKCFGR1, RCC_DCKCFGR1_SAI2SEL, (uint32_t)(__SOURCE__)) - - -/** @brief Macro to get the SAI2 clock source. - * @retval The clock source can be one of the following values: - * @arg RCC_SAI2CLKSOURCE_PLLI2S: PLLI2S_Q clock divided by PLLI2SDIVQ used - * as SAI2 clock. - * @arg RCC_SAI2CLKSOURCE_PLLSAI: PLLISAI_Q clock divided by PLLSAIDIVQ used - * as SAI2 clock. - * @arg RCC_SAI2CLKSOURCE_PIN: External clock mapped on the I2S_CKIN pin - * used as SAI2 clock. - * @arg RCC_SAI2CLKSOURCE_PLLSRC: HSI or HSE depending from PLL Source clock - * used as SAI2 clock. - * @note The RCC_SAI2CLKSOURCE_PLLSRC value is only available with STM32F767/769/777/779xx Devices - */ -#define __HAL_RCC_GET_SAI2_SOURCE() ((uint32_t)(READ_BIT(RCC->DCKCFGR1, RCC_DCKCFGR1_SAI2SEL))) - - -/** @brief Enable PLLSAI_RDY interrupt. - */ -#define __HAL_RCC_PLLSAI_ENABLE_IT() (RCC->CIR |= (RCC_CIR_PLLSAIRDYIE)) - -/** @brief Disable PLLSAI_RDY interrupt. - */ -#define __HAL_RCC_PLLSAI_DISABLE_IT() (RCC->CIR &= ~(RCC_CIR_PLLSAIRDYIE)) - -/** @brief Clear the PLLSAI RDY interrupt pending bits. - */ -#define __HAL_RCC_PLLSAI_CLEAR_IT() (RCC->CIR |= (RCC_CIR_PLLSAIRDYF)) - -/** @brief Check the PLLSAI RDY interrupt has occurred or not. - * @retval The new state (TRUE or FALSE). - */ -#define __HAL_RCC_PLLSAI_GET_IT() ((RCC->CIR & (RCC_CIR_PLLSAIRDYIE)) == (RCC_CIR_PLLSAIRDYIE)) - -/** @brief Check PLLSAI RDY flag is set or not. - * @retval The new state (TRUE or FALSE). - */ -#define __HAL_RCC_PLLSAI_GET_FLAG() ((RCC->CR & (RCC_CR_PLLSAIRDY)) == (RCC_CR_PLLSAIRDY)) - -/** @brief Macro to Get I2S clock source selection. - * @retval The clock source can be one of the following values: - * @arg RCC_I2SCLKSOURCE_PLLI2S: PLLI2S VCO output clock divided by PLLI2SR used as I2S clock. - * @arg RCC_I2SCLKSOURCE_EXT: External clock mapped on the I2S_CKIN pin used as I2S clock source - */ -#define __HAL_RCC_GET_I2SCLKSOURCE() (READ_BIT(RCC->CFGR, RCC_CFGR_I2SSRC)) - -/** @brief Macro to configure the I2C1 clock (I2C1CLK). - * - * @param __I2C1_CLKSOURCE__ specifies the I2C1 clock source. - * This parameter can be one of the following values: - * @arg RCC_I2C1CLKSOURCE_PCLK1: PCLK1 selected as I2C1 clock - * @arg RCC_I2C1CLKSOURCE_HSI: HSI selected as I2C1 clock - * @arg RCC_I2C1CLKSOURCE_SYSCLK: System Clock selected as I2C1 clock - */ -#define __HAL_RCC_I2C1_CONFIG(__I2C1_CLKSOURCE__) \ - MODIFY_REG(RCC->DCKCFGR2, RCC_DCKCFGR2_I2C1SEL, (uint32_t)(__I2C1_CLKSOURCE__)) - -/** @brief Macro to get the I2C1 clock source. - * @retval The clock source can be one of the following values: - * @arg RCC_I2C1CLKSOURCE_PCLK1: PCLK1 selected as I2C1 clock - * @arg RCC_I2C1CLKSOURCE_HSI: HSI selected as I2C1 clock - * @arg RCC_I2C1CLKSOURCE_SYSCLK: System Clock selected as I2C1 clock - */ -#define __HAL_RCC_GET_I2C1_SOURCE() ((uint32_t)(READ_BIT(RCC->DCKCFGR2, RCC_DCKCFGR2_I2C1SEL))) - -/** @brief Macro to configure the I2C2 clock (I2C2CLK). - * - * @param __I2C2_CLKSOURCE__ specifies the I2C2 clock source. - * This parameter can be one of the following values: - * @arg RCC_I2C2CLKSOURCE_PCLK1: PCLK1 selected as I2C2 clock - * @arg RCC_I2C2CLKSOURCE_HSI: HSI selected as I2C2 clock - * @arg RCC_I2C2CLKSOURCE_SYSCLK: System Clock selected as I2C2 clock - */ -#define __HAL_RCC_I2C2_CONFIG(__I2C2_CLKSOURCE__) \ - MODIFY_REG(RCC->DCKCFGR2, RCC_DCKCFGR2_I2C2SEL, (uint32_t)(__I2C2_CLKSOURCE__)) - -/** @brief Macro to get the I2C2 clock source. - * @retval The clock source can be one of the following values: - * @arg RCC_I2C2CLKSOURCE_PCLK1: PCLK1 selected as I2C2 clock - * @arg RCC_I2C2CLKSOURCE_HSI: HSI selected as I2C2 clock - * @arg RCC_I2C2CLKSOURCE_SYSCLK: System Clock selected as I2C2 clock - */ -#define __HAL_RCC_GET_I2C2_SOURCE() ((uint32_t)(READ_BIT(RCC->DCKCFGR2, RCC_DCKCFGR2_I2C2SEL))) - -/** @brief Macro to configure the I2C3 clock (I2C3CLK). - * - * @param __I2C3_CLKSOURCE__ specifies the I2C3 clock source. - * This parameter can be one of the following values: - * @arg RCC_I2C3CLKSOURCE_PCLK1: PCLK1 selected as I2C3 clock - * @arg RCC_I2C3CLKSOURCE_HSI: HSI selected as I2C3 clock - * @arg RCC_I2C3CLKSOURCE_SYSCLK: System Clock selected as I2C3 clock - */ -#define __HAL_RCC_I2C3_CONFIG(__I2C3_CLKSOURCE__) \ - MODIFY_REG(RCC->DCKCFGR2, RCC_DCKCFGR2_I2C3SEL, (uint32_t)(__I2C3_CLKSOURCE__)) - -/** @brief macro to get the I2C3 clock source. - * @retval The clock source can be one of the following values: - * @arg RCC_I2C3CLKSOURCE_PCLK1: PCLK1 selected as I2C3 clock - * @arg RCC_I2C3CLKSOURCE_HSI: HSI selected as I2C3 clock - * @arg RCC_I2C3CLKSOURCE_SYSCLK: System Clock selected as I2C3 clock - */ -#define __HAL_RCC_GET_I2C3_SOURCE() ((uint32_t)(READ_BIT(RCC->DCKCFGR2, RCC_DCKCFGR2_I2C3SEL))) - -/** @brief Macro to configure the I2C4 clock (I2C4CLK). - * - * @param __I2C4_CLKSOURCE__ specifies the I2C4 clock source. - * This parameter can be one of the following values: - * @arg RCC_I2C4CLKSOURCE_PCLK1: PCLK1 selected as I2C4 clock - * @arg RCC_I2C4CLKSOURCE_HSI: HSI selected as I2C4 clock - * @arg RCC_I2C4CLKSOURCE_SYSCLK: System Clock selected as I2C4 clock - */ -#define __HAL_RCC_I2C4_CONFIG(__I2C4_CLKSOURCE__) \ - MODIFY_REG(RCC->DCKCFGR2, RCC_DCKCFGR2_I2C4SEL, (uint32_t)(__I2C4_CLKSOURCE__)) - -/** @brief macro to get the I2C4 clock source. - * @retval The clock source can be one of the following values: - * @arg RCC_I2C4CLKSOURCE_PCLK1: PCLK1 selected as I2C4 clock - * @arg RCC_I2C4CLKSOURCE_HSI: HSI selected as I2C4 clock - * @arg RCC_I2C4CLKSOURCE_SYSCLK: System Clock selected as I2C4 clock - */ -#define __HAL_RCC_GET_I2C4_SOURCE() ((uint32_t)(READ_BIT(RCC->DCKCFGR2, RCC_DCKCFGR2_I2C4SEL))) - -/** @brief Macro to configure the USART1 clock (USART1CLK). - * - * @param __USART1_CLKSOURCE__ specifies the USART1 clock source. - * This parameter can be one of the following values: - * @arg RCC_USART1CLKSOURCE_PCLK2: PCLK2 selected as USART1 clock - * @arg RCC_USART1CLKSOURCE_HSI: HSI selected as USART1 clock - * @arg RCC_USART1CLKSOURCE_SYSCLK: System Clock selected as USART1 clock - * @arg RCC_USART1CLKSOURCE_LSE: LSE selected as USART1 clock - */ -#define __HAL_RCC_USART1_CONFIG(__USART1_CLKSOURCE__) \ - MODIFY_REG(RCC->DCKCFGR2, RCC_DCKCFGR2_USART1SEL, (uint32_t)(__USART1_CLKSOURCE__)) - -/** @brief macro to get the USART1 clock source. - * @retval The clock source can be one of the following values: - * @arg RCC_USART1CLKSOURCE_PCLK2: PCLK2 selected as USART1 clock - * @arg RCC_USART1CLKSOURCE_HSI: HSI selected as USART1 clock - * @arg RCC_USART1CLKSOURCE_SYSCLK: System Clock selected as USART1 clock - * @arg RCC_USART1CLKSOURCE_LSE: LSE selected as USART1 clock - */ -#define __HAL_RCC_GET_USART1_SOURCE() ((uint32_t)(READ_BIT(RCC->DCKCFGR2, RCC_DCKCFGR2_USART1SEL))) - -/** @brief Macro to configure the USART2 clock (USART2CLK). - * - * @param __USART2_CLKSOURCE__ specifies the USART2 clock source. - * This parameter can be one of the following values: - * @arg RCC_USART2CLKSOURCE_PCLK1: PCLK1 selected as USART2 clock - * @arg RCC_USART2CLKSOURCE_HSI: HSI selected as USART2 clock - * @arg RCC_USART2CLKSOURCE_SYSCLK: System Clock selected as USART2 clock - * @arg RCC_USART2CLKSOURCE_LSE: LSE selected as USART2 clock - */ -#define __HAL_RCC_USART2_CONFIG(__USART2_CLKSOURCE__) \ - MODIFY_REG(RCC->DCKCFGR2, RCC_DCKCFGR2_USART2SEL, (uint32_t)(__USART2_CLKSOURCE__)) - -/** @brief macro to get the USART2 clock source. - * @retval The clock source can be one of the following values: - * @arg RCC_USART2CLKSOURCE_PCLK1: PCLK1 selected as USART2 clock - * @arg RCC_USART2CLKSOURCE_HSI: HSI selected as USART2 clock - * @arg RCC_USART2CLKSOURCE_SYSCLK: System Clock selected as USART2 clock - * @arg RCC_USART2CLKSOURCE_LSE: LSE selected as USART2 clock - */ -#define __HAL_RCC_GET_USART2_SOURCE() ((uint32_t)(READ_BIT(RCC->DCKCFGR2, RCC_DCKCFGR2_USART2SEL))) - -/** @brief Macro to configure the USART3 clock (USART3CLK). - * - * @param __USART3_CLKSOURCE__ specifies the USART3 clock source. - * This parameter can be one of the following values: - * @arg RCC_USART3CLKSOURCE_PCLK1: PCLK1 selected as USART3 clock - * @arg RCC_USART3CLKSOURCE_HSI: HSI selected as USART3 clock - * @arg RCC_USART3CLKSOURCE_SYSCLK: System Clock selected as USART3 clock - * @arg RCC_USART3CLKSOURCE_LSE: LSE selected as USART3 clock - */ -#define __HAL_RCC_USART3_CONFIG(__USART3_CLKSOURCE__) \ - MODIFY_REG(RCC->DCKCFGR2, RCC_DCKCFGR2_USART3SEL, (uint32_t)(__USART3_CLKSOURCE__)) - -/** @brief macro to get the USART3 clock source. - * @retval The clock source can be one of the following values: - * @arg RCC_USART3CLKSOURCE_PCLK1: PCLK1 selected as USART3 clock - * @arg RCC_USART3CLKSOURCE_HSI: HSI selected as USART3 clock - * @arg RCC_USART3CLKSOURCE_SYSCLK: System Clock selected as USART3 clock - * @arg RCC_USART3CLKSOURCE_LSE: LSE selected as USART3 clock - */ -#define __HAL_RCC_GET_USART3_SOURCE() ((uint32_t)(READ_BIT(RCC->DCKCFGR2, RCC_DCKCFGR2_USART3SEL))) - - /** @brief Macro to configure the UART4 clock (UART4CLK). - * - * @param __UART4_CLKSOURCE__ specifies the UART4 clock source. - * This parameter can be one of the following values: - * @arg RCC_UART4CLKSOURCE_PCLK1: PCLK1 selected as UART4 clock - * @arg RCC_UART4CLKSOURCE_HSI: HSI selected as UART4 clock - * @arg RCC_UART4CLKSOURCE_SYSCLK: System Clock selected as UART4 clock - * @arg RCC_UART4CLKSOURCE_LSE: LSE selected as UART4 clock - */ -#define __HAL_RCC_UART4_CONFIG(__UART4_CLKSOURCE__) \ - MODIFY_REG(RCC->DCKCFGR2, RCC_DCKCFGR2_UART4SEL, (uint32_t)(__UART4_CLKSOURCE__)) - -/** @brief macro to get the UART4 clock source. - * @retval The clock source can be one of the following values: - * @arg RCC_UART4CLKSOURCE_PCLK1: PCLK1 selected as UART4 clock - * @arg RCC_UART4CLKSOURCE_HSI: HSI selected as UART4 clock - * @arg RCC_UART4CLKSOURCE_SYSCLK: System Clock selected as UART4 clock - * @arg RCC_UART4CLKSOURCE_LSE: LSE selected as UART4 clock - */ -#define __HAL_RCC_GET_UART4_SOURCE() ((uint32_t)(READ_BIT(RCC->DCKCFGR2, RCC_DCKCFGR2_UART4SEL))) - - /** @brief Macro to configure the UART5 clock (UART5CLK). - * - * @param __UART5_CLKSOURCE__ specifies the UART5 clock source. - * This parameter can be one of the following values: - * @arg RCC_UART5CLKSOURCE_PCLK1: PCLK1 selected as UART5 clock - * @arg RCC_UART5CLKSOURCE_HSI: HSI selected as UART5 clock - * @arg RCC_UART5CLKSOURCE_SYSCLK: System Clock selected as UART5 clock - * @arg RCC_UART5CLKSOURCE_LSE: LSE selected as UART5 clock - */ -#define __HAL_RCC_UART5_CONFIG(__UART5_CLKSOURCE__) \ - MODIFY_REG(RCC->DCKCFGR2, RCC_DCKCFGR2_UART5SEL, (uint32_t)(__UART5_CLKSOURCE__)) - -/** @brief macro to get the UART5 clock source. - * @retval The clock source can be one of the following values: - * @arg RCC_UART5CLKSOURCE_PCLK1: PCLK1 selected as UART5 clock - * @arg RCC_UART5CLKSOURCE_HSI: HSI selected as UART5 clock - * @arg RCC_UART5CLKSOURCE_SYSCLK: System Clock selected as UART5 clock - * @arg RCC_UART5CLKSOURCE_LSE: LSE selected as UART5 clock - */ -#define __HAL_RCC_GET_UART5_SOURCE() ((uint32_t)(READ_BIT(RCC->DCKCFGR2, RCC_DCKCFGR2_UART5SEL))) - - /** @brief Macro to configure the USART6 clock (USART6CLK). - * - * @param __USART6_CLKSOURCE__ specifies the USART6 clock source. - * This parameter can be one of the following values: - * @arg RCC_USART6CLKSOURCE_PCLK1: PCLK1 selected as USART6 clock - * @arg RCC_USART6CLKSOURCE_HSI: HSI selected as USART6 clock - * @arg RCC_USART6CLKSOURCE_SYSCLK: System Clock selected as USART6 clock - * @arg RCC_USART6CLKSOURCE_LSE: LSE selected as USART6 clock - */ -#define __HAL_RCC_USART6_CONFIG(__USART6_CLKSOURCE__) \ - MODIFY_REG(RCC->DCKCFGR2, RCC_DCKCFGR2_USART6SEL, (uint32_t)(__USART6_CLKSOURCE__)) - -/** @brief macro to get the USART6 clock source. - * @retval The clock source can be one of the following values: - * @arg RCC_USART6CLKSOURCE_PCLK1: PCLK1 selected as USART6 clock - * @arg RCC_USART6CLKSOURCE_HSI: HSI selected as USART6 clock - * @arg RCC_USART6CLKSOURCE_SYSCLK: System Clock selected as USART6 clock - * @arg RCC_USART6CLKSOURCE_LSE: LSE selected as USART6 clock - */ -#define __HAL_RCC_GET_USART6_SOURCE() ((uint32_t)(READ_BIT(RCC->DCKCFGR2, RCC_DCKCFGR2_USART6SEL))) - - /** @brief Macro to configure the UART7 clock (UART7CLK). - * - * @param __UART7_CLKSOURCE__ specifies the UART7 clock source. - * This parameter can be one of the following values: - * @arg RCC_UART7CLKSOURCE_PCLK1: PCLK1 selected as UART7 clock - * @arg RCC_UART7CLKSOURCE_HSI: HSI selected as UART7 clock - * @arg RCC_UART7CLKSOURCE_SYSCLK: System Clock selected as UART7 clock - * @arg RCC_UART7CLKSOURCE_LSE: LSE selected as UART7 clock - */ -#define __HAL_RCC_UART7_CONFIG(__UART7_CLKSOURCE__) \ - MODIFY_REG(RCC->DCKCFGR2, RCC_DCKCFGR2_UART7SEL, (uint32_t)(__UART7_CLKSOURCE__)) - -/** @brief macro to get the UART7 clock source. - * @retval The clock source can be one of the following values: - * @arg RCC_UART7CLKSOURCE_PCLK1: PCLK1 selected as UART7 clock - * @arg RCC_UART7CLKSOURCE_HSI: HSI selected as UART7 clock - * @arg RCC_UART7CLKSOURCE_SYSCLK: System Clock selected as UART7 clock - * @arg RCC_UART7CLKSOURCE_LSE: LSE selected as UART7 clock - */ -#define __HAL_RCC_GET_UART7_SOURCE() ((uint32_t)(READ_BIT(RCC->DCKCFGR2, RCC_DCKCFGR2_UART7SEL))) - -/** @brief Macro to configure the UART8 clock (UART8CLK). - * - * @param __UART8_CLKSOURCE__ specifies the UART8 clock source. - * This parameter can be one of the following values: - * @arg RCC_UART8CLKSOURCE_PCLK1: PCLK1 selected as UART8 clock - * @arg RCC_UART8CLKSOURCE_HSI: HSI selected as UART8 clock - * @arg RCC_UART8CLKSOURCE_SYSCLK: System Clock selected as UART8 clock - * @arg RCC_UART8CLKSOURCE_LSE: LSE selected as UART8 clock - */ -#define __HAL_RCC_UART8_CONFIG(__UART8_CLKSOURCE__) \ - MODIFY_REG(RCC->DCKCFGR2, RCC_DCKCFGR2_UART8SEL, (uint32_t)(__UART8_CLKSOURCE__)) - -/** @brief macro to get the UART8 clock source. - * @retval The clock source can be one of the following values: - * @arg RCC_UART8CLKSOURCE_PCLK1: PCLK1 selected as UART8 clock - * @arg RCC_UART8CLKSOURCE_HSI: HSI selected as UART8 clock - * @arg RCC_UART8CLKSOURCE_SYSCLK: System Clock selected as UART8 clock - * @arg RCC_UART8CLKSOURCE_LSE: LSE selected as UART8 clock - */ -#define __HAL_RCC_GET_UART8_SOURCE() ((uint32_t)(READ_BIT(RCC->DCKCFGR2, RCC_DCKCFGR2_UART8SEL))) - -/** @brief Macro to configure the LPTIM1 clock (LPTIM1CLK). - * - * @param __LPTIM1_CLKSOURCE__ specifies the LPTIM1 clock source. - * This parameter can be one of the following values: - * @arg RCC_LPTIM1CLKSOURCE_PCLK1: PCLK selected as LPTIM1 clock - * @arg RCC_LPTIM1CLKSOURCE_HSI: HSI selected as LPTIM1 clock - * @arg RCC_LPTIM1CLKSOURCE_LSI: LSI selected as LPTIM1 clock - * @arg RCC_LPTIM1CLKSOURCE_LSE: LSE selected as LPTIM1 clock - */ -#define __HAL_RCC_LPTIM1_CONFIG(__LPTIM1_CLKSOURCE__) \ - MODIFY_REG(RCC->DCKCFGR2, RCC_DCKCFGR2_LPTIM1SEL, (uint32_t)(__LPTIM1_CLKSOURCE__)) - -/** @brief macro to get the LPTIM1 clock source. - * @retval The clock source can be one of the following values: - * @arg RCC_LPTIM1CLKSOURCE_PCLK1: PCLK selected as LPTIM1 clock - * @arg RCC_LPTIM1CLKSOURCE_HSI: HSI selected as LPTIM1 clock - * @arg RCC_LPTIM1CLKSOURCE_LSI: LSI selected as LPTIM1 clock - * @arg RCC_LPTIM1CLKSOURCE_LSE: LSE selected as LPTIM1 clock - */ -#define __HAL_RCC_GET_LPTIM1_SOURCE() ((uint32_t)(READ_BIT(RCC->DCKCFGR2, RCC_DCKCFGR2_LPTIM1SEL))) - -/** @brief Macro to configure the CEC clock (CECCLK). - * - * @param __CEC_CLKSOURCE__ specifies the CEC clock source. - * This parameter can be one of the following values: - * @arg RCC_CECCLKSOURCE_LSE: LSE selected as CEC clock - * @arg RCC_CECCLKSOURCE_HSI: HSI divided by 488 selected as CEC clock - */ -#define __HAL_RCC_CEC_CONFIG(__CEC_CLKSOURCE__) \ - MODIFY_REG(RCC->DCKCFGR2, RCC_DCKCFGR2_CECSEL, (uint32_t)(__CEC_CLKSOURCE__)) - -/** @brief macro to get the CEC clock source. - * @retval The clock source can be one of the following values: - * @arg RCC_CECCLKSOURCE_LSE: LSE selected as CEC clock - * @arg RCC_CECCLKSOURCE_HSI: HSI selected as CEC clock - */ -#define __HAL_RCC_GET_CEC_SOURCE() ((uint32_t)(READ_BIT(RCC->DCKCFGR2, RCC_DCKCFGR2_CECSEL))) - -/** @brief Macro to configure the CLK48 source (CLK48CLK). - * - * @param __CLK48_SOURCE__ specifies the CLK48 clock source. - * This parameter can be one of the following values: - * @arg RCC_CLK48SOURCE_PLL: PLL selected as CLK48 source - * @arg RCC_CLK48SOURCE_PLLSAIP: PLLSAIP selected as CLK48 source - */ -#define __HAL_RCC_CLK48_CONFIG(__CLK48_SOURCE__) \ - MODIFY_REG(RCC->DCKCFGR2, RCC_DCKCFGR2_CK48MSEL, (uint32_t)(__CLK48_SOURCE__)) - -/** @brief macro to get the CLK48 source. - * @retval The clock source can be one of the following values: - * @arg RCC_CLK48SOURCE_PLL: PLL used as CLK48 source - * @arg RCC_CLK48SOURCE_PLLSAIP: PLLSAIP used as CLK48 source - */ -#define __HAL_RCC_GET_CLK48_SOURCE() ((uint32_t)(READ_BIT(RCC->DCKCFGR2, RCC_DCKCFGR2_CK48MSEL))) - -/** @brief Macro to configure the SDMMC1 clock (SDMMC1CLK). - * - * @param __SDMMC1_CLKSOURCE__ specifies the SDMMC1 clock source. - * This parameter can be one of the following values: - * @arg RCC_SDMMC1CLKSOURCE_CLK48: CLK48 selected as SDMMC clock - * @arg RCC_SDMMC1CLKSOURCE_SYSCLK: SYSCLK selected as SDMMC clock - */ -#define __HAL_RCC_SDMMC1_CONFIG(__SDMMC1_CLKSOURCE__) \ - MODIFY_REG(RCC->DCKCFGR2, RCC_DCKCFGR2_SDMMC1SEL, (uint32_t)(__SDMMC1_CLKSOURCE__)) - -/** @brief macro to get the SDMMC1 clock source. - * @retval The clock source can be one of the following values: - * @arg RCC_SDMMC1CLKSOURCE_CLK48: CLK48 selected as SDMMC1 clock - * @arg RCC_SDMMC1CLKSOURCE_SYSCLK: SYSCLK selected as SDMMC1 clock - */ -#define __HAL_RCC_GET_SDMMC1_SOURCE() ((uint32_t)(READ_BIT(RCC->DCKCFGR2, RCC_DCKCFGR2_SDMMC1SEL))) - -#if defined (STM32F722xx) || defined (STM32F723xx) || defined (STM32F732xx) || defined (STM32F733xx) || defined (STM32F765xx) ||\ - defined (STM32F767xx) || defined (STM32F769xx) || defined (STM32F777xx) || defined (STM32F779xx) || defined (STM32F730xx) -/** @brief Macro to configure the SDMMC2 clock (SDMMC2CLK). - * @param __SDMMC2_CLKSOURCE__ specifies the SDMMC2 clock source. - * This parameter can be one of the following values: - * @arg RCC_SDMMC2CLKSOURCE_CLK48: CLK48 selected as SDMMC2 clock - * @arg RCC_SDMMC2CLKSOURCE_SYSCLK: SYSCLK selected as SDMMC2 clock - */ -#define __HAL_RCC_SDMMC2_CONFIG(__SDMMC2_CLKSOURCE__) \ - MODIFY_REG(RCC->DCKCFGR2, RCC_DCKCFGR2_SDMMC2SEL, (uint32_t)(__SDMMC2_CLKSOURCE__)) - -/** @brief macro to get the SDMMC2 clock source. - * @retval The clock source can be one of the following values: - * @arg RCC_SDMMC2CLKSOURCE_CLK48: CLK48 selected as SDMMC2 clock - * @arg RCC_SDMMC2CLKSOURCE_SYSCLK: SYSCLK selected as SDMMC2 clock - */ -#define __HAL_RCC_GET_SDMMC2_SOURCE() ((uint32_t)(READ_BIT(RCC->DCKCFGR2, RCC_DCKCFGR2_SDMMC2SEL))) -#endif /* STM32F722xx || STM32F723xx || STM32F732xx || STM32F733xx || STM32F765xx || STM32F767xx || STM32F769xx || STM32F777xx || STM32F779xx || STM32F730xx */ - -#if defined (STM32F765xx) || defined (STM32F767xx) || defined (STM32F769xx) || defined (STM32F777xx) || defined (STM32F779xx) -/** @brief Macro to configure the DFSDM1 clock - * @param __DFSDM1_CLKSOURCE__ specifies the DFSDM1 clock source. - * This parameter can be one of the following values: - * @arg RCC_DFSDM1CLKSOURCE_PCLK2: PCLK2 Clock selected as DFSDM clock - * @arg RCC_DFSDMCLKSOURCE_SYSCLK: System Clock selected as DFSDM clock - */ -#define __HAL_RCC_DFSDM1_CONFIG(__DFSDM1_CLKSOURCE__) \ - MODIFY_REG(RCC->DCKCFGR1, RCC_DCKCFGR1_DFSDM1SEL, (uint32_t)(__DFSDM1_CLKSOURCE__)) - -/** @brief Macro to get the DFSDM1 clock source. - * @retval The clock source can be one of the following values: - * @arg RCC_DFSDM1CLKSOURCE_PCLK2: PCLK2 Clock selected as DFSDM1 clock - * @arg RCC_DFSDM1CLKSOURCE_SYSCLK: System Clock selected as DFSDM1 clock - */ -#define __HAL_RCC_GET_DFSDM1_SOURCE() ((uint32_t)(READ_BIT(RCC->DCKCFGR1, RCC_DCKCFGR1_DFSDM1SEL))) - -/** @brief Macro to configure the DFSDM1 Audio clock - * @param __DFSDM1AUDIO_CLKSOURCE__ specifies the DFSDM1 Audio clock source. - * This parameter can be one of the following values: - * @arg RCC_DFSDM1AUDIOCLKSOURCE_SAI1: SAI1 Clock selected as DFSDM1 Audio clock - * @arg RCC_DFSDM1AUDIOCLKSOURCE_SAI2: SAI2 Clock selected as DFSDM1 Audio clock - */ -#define __HAL_RCC_DFSDM1AUDIO_CONFIG(__DFSDM1AUDIO_CLKSOURCE__) \ - MODIFY_REG(RCC->DCKCFGR1, RCC_DCKCFGR1_ADFSDM1SEL, (uint32_t)(__DFSDM1AUDIO_CLKSOURCE__)) - -/** @brief Macro to get the DFSDM1 Audio clock source. - * @retval The clock source can be one of the following values: - * @arg RCC_DFSDM1AUDIOCLKSOURCE_SAI1: SAI1 Clock selected as DFSDM1 Audio clock - * @arg RCC_DFSDM1AUDIOCLKSOURCE_SAI2: SAI2 Clock selected as DFSDM1 Audio clock - */ -#define __HAL_RCC_GET_DFSDM1AUDIO_SOURCE() ((uint32_t)(READ_BIT(RCC->DCKCFGR1, RCC_DCKCFGR1_ADFSDM1SEL))) -#endif /* STM32F767xx || STM32F769xx || STM32F777xx || STM32F779xx */ - -#if defined (STM32F769xx) || defined (STM32F779xx) -/** @brief Macro to configure the DSI clock. - * @param __DSI_CLKSOURCE__ specifies the DSI clock source. - * This parameter can be one of the following values: - * @arg RCC_DSICLKSOURCE_PLLR: PLLR output used as DSI clock. - * @arg RCC_DSICLKSOURCE_DSIPHY: DSI-PHY output used as DSI clock. - */ -#define __HAL_RCC_DSI_CONFIG(__DSI_CLKSOURCE__) (MODIFY_REG(RCC->DCKCFGR2, RCC_DCKCFGR2_DSISEL, (uint32_t)(__DSI_CLKSOURCE__))) - -/** @brief Macro to Get the DSI clock. - * @retval The clock source can be one of the following values: - * @arg RCC_DSICLKSOURCE_PLLR: PLLR output used as DSI clock. - * @arg RCC_DSICLKSOURCE_DSIPHY: DSI-PHY output used as DSI clock. - */ -#define __HAL_RCC_GET_DSI_SOURCE() (READ_BIT(RCC->DCKCFGR2, RCC_DCKCFGR2_DSISEL)) -#endif /* STM32F769xx || STM32F779xx */ -/** - * @} - */ - -/* Exported functions --------------------------------------------------------*/ -/** @addtogroup RCCEx_Exported_Functions_Group1 - * @{ - */ -HAL_StatusTypeDef HAL_RCCEx_PeriphCLKConfig(RCC_PeriphCLKInitTypeDef *PeriphClkInit); -void HAL_RCCEx_GetPeriphCLKConfig(RCC_PeriphCLKInitTypeDef *PeriphClkInit); -uint32_t HAL_RCCEx_GetPeriphCLKFreq(uint32_t PeriphClk); -HAL_StatusTypeDef HAL_RCCEx_EnablePLLI2S(RCC_PLLI2SInitTypeDef *PLLI2SInit); -HAL_StatusTypeDef HAL_RCCEx_DisablePLLI2S(void); -HAL_StatusTypeDef HAL_RCCEx_EnablePLLSAI(RCC_PLLSAIInitTypeDef *PLLSAIInit); -HAL_StatusTypeDef HAL_RCCEx_DisablePLLSAI(void); -/** - * @} - */ -/* Private macros ------------------------------------------------------------*/ -/** @addtogroup RCCEx_Private_Macros RCCEx Private Macros - * @{ - */ -/** @defgroup RCCEx_IS_RCC_Definitions RCC Private macros to check input parameters - * @{ - */ -#if defined(STM32F756xx) || defined(STM32F746xx) || defined(STM32F750xx) -#define IS_RCC_PERIPHCLOCK(SELECTION) \ - ((((SELECTION) & RCC_PERIPHCLK_I2S) == RCC_PERIPHCLK_I2S) || \ - (((SELECTION) & RCC_PERIPHCLK_LTDC) == RCC_PERIPHCLK_LTDC) || \ - (((SELECTION) & RCC_PERIPHCLK_TIM) == RCC_PERIPHCLK_TIM) || \ - (((SELECTION) & RCC_PERIPHCLK_USART1) == RCC_PERIPHCLK_USART1) || \ - (((SELECTION) & RCC_PERIPHCLK_USART2) == RCC_PERIPHCLK_USART2) || \ - (((SELECTION) & RCC_PERIPHCLK_USART3) == RCC_PERIPHCLK_USART3) || \ - (((SELECTION) & RCC_PERIPHCLK_UART4) == RCC_PERIPHCLK_UART4) || \ - (((SELECTION) & RCC_PERIPHCLK_UART5) == RCC_PERIPHCLK_UART5) || \ - (((SELECTION) & RCC_PERIPHCLK_USART6) == RCC_PERIPHCLK_USART6) || \ - (((SELECTION) & RCC_PERIPHCLK_UART7) == RCC_PERIPHCLK_UART7) || \ - (((SELECTION) & RCC_PERIPHCLK_UART8) == RCC_PERIPHCLK_UART8) || \ - (((SELECTION) & RCC_PERIPHCLK_I2C1) == RCC_PERIPHCLK_I2C1) || \ - (((SELECTION) & RCC_PERIPHCLK_I2C2) == RCC_PERIPHCLK_I2C2) || \ - (((SELECTION) & RCC_PERIPHCLK_I2C3) == RCC_PERIPHCLK_I2C3) || \ - (((SELECTION) & RCC_PERIPHCLK_I2C4) == RCC_PERIPHCLK_I2C4) || \ - (((SELECTION) & RCC_PERIPHCLK_LPTIM1) == RCC_PERIPHCLK_LPTIM1) || \ - (((SELECTION) & RCC_PERIPHCLK_SAI1) == RCC_PERIPHCLK_SAI1) || \ - (((SELECTION) & RCC_PERIPHCLK_SAI2) == RCC_PERIPHCLK_SAI2) || \ - (((SELECTION) & RCC_PERIPHCLK_CLK48) == RCC_PERIPHCLK_CLK48) || \ - (((SELECTION) & RCC_PERIPHCLK_CEC) == RCC_PERIPHCLK_CEC) || \ - (((SELECTION) & RCC_PERIPHCLK_SDMMC1) == RCC_PERIPHCLK_SDMMC1) || \ - (((SELECTION) & RCC_PERIPHCLK_SPDIFRX) == RCC_PERIPHCLK_SPDIFRX) || \ - (((SELECTION) & RCC_PERIPHCLK_RTC) == RCC_PERIPHCLK_RTC)) -#elif defined(STM32F745xx) -#define IS_RCC_PERIPHCLOCK(SELECTION) \ - ((((SELECTION) & RCC_PERIPHCLK_I2S) == RCC_PERIPHCLK_I2S) || \ - (((SELECTION) & RCC_PERIPHCLK_TIM) == RCC_PERIPHCLK_TIM) || \ - (((SELECTION) & RCC_PERIPHCLK_USART1) == RCC_PERIPHCLK_USART1) || \ - (((SELECTION) & RCC_PERIPHCLK_USART2) == RCC_PERIPHCLK_USART2) || \ - (((SELECTION) & RCC_PERIPHCLK_USART3) == RCC_PERIPHCLK_USART3) || \ - (((SELECTION) & RCC_PERIPHCLK_UART4) == RCC_PERIPHCLK_UART4) || \ - (((SELECTION) & RCC_PERIPHCLK_UART5) == RCC_PERIPHCLK_UART5) || \ - (((SELECTION) & RCC_PERIPHCLK_USART6) == RCC_PERIPHCLK_USART6) || \ - (((SELECTION) & RCC_PERIPHCLK_UART7) == RCC_PERIPHCLK_UART7) || \ - (((SELECTION) & RCC_PERIPHCLK_UART8) == RCC_PERIPHCLK_UART8) || \ - (((SELECTION) & RCC_PERIPHCLK_I2C1) == RCC_PERIPHCLK_I2C1) || \ - (((SELECTION) & RCC_PERIPHCLK_I2C2) == RCC_PERIPHCLK_I2C2) || \ - (((SELECTION) & RCC_PERIPHCLK_I2C3) == RCC_PERIPHCLK_I2C3) || \ - (((SELECTION) & RCC_PERIPHCLK_I2C4) == RCC_PERIPHCLK_I2C4) || \ - (((SELECTION) & RCC_PERIPHCLK_LPTIM1) == RCC_PERIPHCLK_LPTIM1) || \ - (((SELECTION) & RCC_PERIPHCLK_SAI1) == RCC_PERIPHCLK_SAI1) || \ - (((SELECTION) & RCC_PERIPHCLK_SAI2) == RCC_PERIPHCLK_SAI2) || \ - (((SELECTION) & RCC_PERIPHCLK_CLK48) == RCC_PERIPHCLK_CLK48) || \ - (((SELECTION) & RCC_PERIPHCLK_CEC) == RCC_PERIPHCLK_CEC) || \ - (((SELECTION) & RCC_PERIPHCLK_SDMMC1) == RCC_PERIPHCLK_SDMMC1) || \ - (((SELECTION) & RCC_PERIPHCLK_SPDIFRX) == RCC_PERIPHCLK_SPDIFRX) || \ - (((SELECTION) & RCC_PERIPHCLK_RTC) == RCC_PERIPHCLK_RTC)) -#elif defined (STM32F767xx) || defined (STM32F769xx) || defined (STM32F777xx) || defined (STM32F779xx) -#define IS_RCC_PERIPHCLOCK(SELECTION) \ - ((((SELECTION) & RCC_PERIPHCLK_I2S) == RCC_PERIPHCLK_I2S) || \ - (((SELECTION) & RCC_PERIPHCLK_LTDC) == RCC_PERIPHCLK_LTDC) || \ - (((SELECTION) & RCC_PERIPHCLK_TIM) == RCC_PERIPHCLK_TIM) || \ - (((SELECTION) & RCC_PERIPHCLK_USART1) == RCC_PERIPHCLK_USART1) || \ - (((SELECTION) & RCC_PERIPHCLK_USART2) == RCC_PERIPHCLK_USART2) || \ - (((SELECTION) & RCC_PERIPHCLK_USART3) == RCC_PERIPHCLK_USART3) || \ - (((SELECTION) & RCC_PERIPHCLK_UART4) == RCC_PERIPHCLK_UART4) || \ - (((SELECTION) & RCC_PERIPHCLK_UART5) == RCC_PERIPHCLK_UART5) || \ - (((SELECTION) & RCC_PERIPHCLK_USART6) == RCC_PERIPHCLK_USART6) || \ - (((SELECTION) & RCC_PERIPHCLK_UART7) == RCC_PERIPHCLK_UART7) || \ - (((SELECTION) & RCC_PERIPHCLK_UART8) == RCC_PERIPHCLK_UART8) || \ - (((SELECTION) & RCC_PERIPHCLK_I2C1) == RCC_PERIPHCLK_I2C1) || \ - (((SELECTION) & RCC_PERIPHCLK_I2C2) == RCC_PERIPHCLK_I2C2) || \ - (((SELECTION) & RCC_PERIPHCLK_I2C3) == RCC_PERIPHCLK_I2C3) || \ - (((SELECTION) & RCC_PERIPHCLK_I2C4) == RCC_PERIPHCLK_I2C4) || \ - (((SELECTION) & RCC_PERIPHCLK_LPTIM1) == RCC_PERIPHCLK_LPTIM1) || \ - (((SELECTION) & RCC_PERIPHCLK_SAI1) == RCC_PERIPHCLK_SAI1) || \ - (((SELECTION) & RCC_PERIPHCLK_SAI2) == RCC_PERIPHCLK_SAI2) || \ - (((SELECTION) & RCC_PERIPHCLK_CLK48) == RCC_PERIPHCLK_CLK48) || \ - (((SELECTION) & RCC_PERIPHCLK_CEC) == RCC_PERIPHCLK_CEC) || \ - (((SELECTION) & RCC_PERIPHCLK_SDMMC1) == RCC_PERIPHCLK_SDMMC1) || \ - (((SELECTION) & RCC_PERIPHCLK_SDMMC2) == RCC_PERIPHCLK_SDMMC2) || \ - (((SELECTION) & RCC_PERIPHCLK_DFSDM1) == RCC_PERIPHCLK_DFSDM1) || \ - (((SELECTION) & RCC_PERIPHCLK_DFSDM1_AUDIO) == RCC_PERIPHCLK_DFSDM1_AUDIO) || \ - (((SELECTION) & RCC_PERIPHCLK_SPDIFRX) == RCC_PERIPHCLK_SPDIFRX) || \ - (((SELECTION) & RCC_PERIPHCLK_RTC) == RCC_PERIPHCLK_RTC)) -#elif defined (STM32F765xx) -#define IS_RCC_PERIPHCLOCK(SELECTION) \ - ((((SELECTION) & RCC_PERIPHCLK_I2S) == RCC_PERIPHCLK_I2S) || \ - (((SELECTION) & RCC_PERIPHCLK_TIM) == RCC_PERIPHCLK_TIM) || \ - (((SELECTION) & RCC_PERIPHCLK_USART1) == RCC_PERIPHCLK_USART1) || \ - (((SELECTION) & RCC_PERIPHCLK_USART2) == RCC_PERIPHCLK_USART2) || \ - (((SELECTION) & RCC_PERIPHCLK_USART3) == RCC_PERIPHCLK_USART3) || \ - (((SELECTION) & RCC_PERIPHCLK_UART4) == RCC_PERIPHCLK_UART4) || \ - (((SELECTION) & RCC_PERIPHCLK_UART5) == RCC_PERIPHCLK_UART5) || \ - (((SELECTION) & RCC_PERIPHCLK_USART6) == RCC_PERIPHCLK_USART6) || \ - (((SELECTION) & RCC_PERIPHCLK_UART7) == RCC_PERIPHCLK_UART7) || \ - (((SELECTION) & RCC_PERIPHCLK_UART8) == RCC_PERIPHCLK_UART8) || \ - (((SELECTION) & RCC_PERIPHCLK_I2C1) == RCC_PERIPHCLK_I2C1) || \ - (((SELECTION) & RCC_PERIPHCLK_I2C2) == RCC_PERIPHCLK_I2C2) || \ - (((SELECTION) & RCC_PERIPHCLK_I2C3) == RCC_PERIPHCLK_I2C3) || \ - (((SELECTION) & RCC_PERIPHCLK_I2C4) == RCC_PERIPHCLK_I2C4) || \ - (((SELECTION) & RCC_PERIPHCLK_LPTIM1) == RCC_PERIPHCLK_LPTIM1) || \ - (((SELECTION) & RCC_PERIPHCLK_SAI1) == RCC_PERIPHCLK_SAI1) || \ - (((SELECTION) & RCC_PERIPHCLK_SAI2) == RCC_PERIPHCLK_SAI2) || \ - (((SELECTION) & RCC_PERIPHCLK_CLK48) == RCC_PERIPHCLK_CLK48) || \ - (((SELECTION) & RCC_PERIPHCLK_CEC) == RCC_PERIPHCLK_CEC) || \ - (((SELECTION) & RCC_PERIPHCLK_SDMMC1) == RCC_PERIPHCLK_SDMMC1) || \ - (((SELECTION) & RCC_PERIPHCLK_SDMMC2) == RCC_PERIPHCLK_SDMMC2) || \ - (((SELECTION) & RCC_PERIPHCLK_DFSDM1) == RCC_PERIPHCLK_DFSDM1) || \ - (((SELECTION) & RCC_PERIPHCLK_DFSDM1_AUDIO) == RCC_PERIPHCLK_DFSDM1_AUDIO) || \ - (((SELECTION) & RCC_PERIPHCLK_SPDIFRX) == RCC_PERIPHCLK_SPDIFRX) || \ - (((SELECTION) & RCC_PERIPHCLK_RTC) == RCC_PERIPHCLK_RTC)) -#elif defined (STM32F722xx) || defined (STM32F723xx) || defined (STM32F732xx) || defined (STM32F733xx) || defined (STM32F730xx) -#define IS_RCC_PERIPHCLOCK(SELECTION) \ - ((((SELECTION) & RCC_PERIPHCLK_I2S) == RCC_PERIPHCLK_I2S) || \ - (((SELECTION) & RCC_PERIPHCLK_TIM) == RCC_PERIPHCLK_TIM) || \ - (((SELECTION) & RCC_PERIPHCLK_USART1) == RCC_PERIPHCLK_USART1) || \ - (((SELECTION) & RCC_PERIPHCLK_USART2) == RCC_PERIPHCLK_USART2) || \ - (((SELECTION) & RCC_PERIPHCLK_USART3) == RCC_PERIPHCLK_USART3) || \ - (((SELECTION) & RCC_PERIPHCLK_UART4) == RCC_PERIPHCLK_UART4) || \ - (((SELECTION) & RCC_PERIPHCLK_UART5) == RCC_PERIPHCLK_UART5) || \ - (((SELECTION) & RCC_PERIPHCLK_USART6) == RCC_PERIPHCLK_USART6) || \ - (((SELECTION) & RCC_PERIPHCLK_UART7) == RCC_PERIPHCLK_UART7) || \ - (((SELECTION) & RCC_PERIPHCLK_UART8) == RCC_PERIPHCLK_UART8) || \ - (((SELECTION) & RCC_PERIPHCLK_I2C1) == RCC_PERIPHCLK_I2C1) || \ - (((SELECTION) & RCC_PERIPHCLK_I2C2) == RCC_PERIPHCLK_I2C2) || \ - (((SELECTION) & RCC_PERIPHCLK_I2C3) == RCC_PERIPHCLK_I2C3) || \ - (((SELECTION) & RCC_PERIPHCLK_LPTIM1) == RCC_PERIPHCLK_LPTIM1) || \ - (((SELECTION) & RCC_PERIPHCLK_SAI1) == RCC_PERIPHCLK_SAI1) || \ - (((SELECTION) & RCC_PERIPHCLK_SAI2) == RCC_PERIPHCLK_SAI2) || \ - (((SELECTION) & RCC_PERIPHCLK_CLK48) == RCC_PERIPHCLK_CLK48) || \ - (((SELECTION) & RCC_PERIPHCLK_SDMMC1) == RCC_PERIPHCLK_SDMMC1) || \ - (((SELECTION) & RCC_PERIPHCLK_SDMMC2) == RCC_PERIPHCLK_SDMMC2) || \ - (((SELECTION) & RCC_PERIPHCLK_RTC) == RCC_PERIPHCLK_RTC)) -#endif /* STM32F746xx || STM32F756xx || STM32F750xx */ -#define IS_RCC_PLLI2SN_VALUE(VALUE) ((50 <= (VALUE)) && ((VALUE) <= 432)) -#if defined (STM32F745xx) || defined (STM32F746xx) || defined (STM32F756xx) || defined (STM32F765xx) || defined (STM32F767xx) || \ - defined (STM32F769xx) || defined (STM32F777xx) || defined (STM32F779xx) || defined (STM32F750xx) -#define IS_RCC_PLLI2SP_VALUE(VALUE) (((VALUE) == RCC_PLLI2SP_DIV2) ||\ - ((VALUE) == RCC_PLLI2SP_DIV4) ||\ - ((VALUE) == RCC_PLLI2SP_DIV6) ||\ - ((VALUE) == RCC_PLLI2SP_DIV8)) -#endif /* STM32F745xx || STM32F746xx || STM32F756xx || STM32F765xx || STM32F767xx || STM32F769xx || STM32F777xx || STM32F779xx || STM32F750xx */ -#define IS_RCC_PLLI2SQ_VALUE(VALUE) ((2 <= (VALUE)) && ((VALUE) <= 15)) -#define IS_RCC_PLLI2SR_VALUE(VALUE) ((2 <= (VALUE)) && ((VALUE) <= 7)) - -#define IS_RCC_PLLSAIN_VALUE(VALUE) ((50 <= (VALUE)) && ((VALUE) <= 432)) -#define IS_RCC_PLLSAIP_VALUE(VALUE) (((VALUE) == RCC_PLLSAIP_DIV2) ||\ - ((VALUE) == RCC_PLLSAIP_DIV4) ||\ - ((VALUE) == RCC_PLLSAIP_DIV6) ||\ - ((VALUE) == RCC_PLLSAIP_DIV8)) -#define IS_RCC_PLLSAIQ_VALUE(VALUE) ((2 <= (VALUE)) && ((VALUE) <= 15)) -#define IS_RCC_PLLSAIR_VALUE(VALUE) ((2 <= (VALUE)) && ((VALUE) <= 7)) - -#define IS_RCC_PLLSAI_DIVQ_VALUE(VALUE) ((1 <= (VALUE)) && ((VALUE) <= 32)) - -#define IS_RCC_PLLI2S_DIVQ_VALUE(VALUE) ((1 <= (VALUE)) && ((VALUE) <= 32)) - -#define IS_RCC_PLLSAI_DIVR_VALUE(VALUE) (((VALUE) == RCC_PLLSAIDIVR_2) ||\ - ((VALUE) == RCC_PLLSAIDIVR_4) ||\ - ((VALUE) == RCC_PLLSAIDIVR_8) ||\ - ((VALUE) == RCC_PLLSAIDIVR_16)) -#define IS_RCC_I2SCLKSOURCE(SOURCE) (((SOURCE) == RCC_I2SCLKSOURCE_PLLI2S) || \ - ((SOURCE) == RCC_I2SCLKSOURCE_EXT)) - -#define IS_RCC_SDMMC1CLKSOURCE(SOURCE) (((SOURCE) == RCC_SDMMC1CLKSOURCE_SYSCLK) || \ - ((SOURCE) == RCC_SDMMC1CLKSOURCE_CLK48)) - -#define IS_RCC_CECCLKSOURCE(SOURCE) (((SOURCE) == RCC_CECCLKSOURCE_HSI) || \ - ((SOURCE) == RCC_CECCLKSOURCE_LSE)) -#define IS_RCC_USART1CLKSOURCE(SOURCE) \ - (((SOURCE) == RCC_USART1CLKSOURCE_PCLK2) || \ - ((SOURCE) == RCC_USART1CLKSOURCE_SYSCLK) || \ - ((SOURCE) == RCC_USART1CLKSOURCE_LSE) || \ - ((SOURCE) == RCC_USART1CLKSOURCE_HSI)) - -#define IS_RCC_USART2CLKSOURCE(SOURCE) \ - (((SOURCE) == RCC_USART2CLKSOURCE_PCLK1) || \ - ((SOURCE) == RCC_USART2CLKSOURCE_SYSCLK) || \ - ((SOURCE) == RCC_USART2CLKSOURCE_LSE) || \ - ((SOURCE) == RCC_USART2CLKSOURCE_HSI)) -#define IS_RCC_USART3CLKSOURCE(SOURCE) \ - (((SOURCE) == RCC_USART3CLKSOURCE_PCLK1) || \ - ((SOURCE) == RCC_USART3CLKSOURCE_SYSCLK) || \ - ((SOURCE) == RCC_USART3CLKSOURCE_LSE) || \ - ((SOURCE) == RCC_USART3CLKSOURCE_HSI)) - -#define IS_RCC_UART4CLKSOURCE(SOURCE) \ - (((SOURCE) == RCC_UART4CLKSOURCE_PCLK1) || \ - ((SOURCE) == RCC_UART4CLKSOURCE_SYSCLK) || \ - ((SOURCE) == RCC_UART4CLKSOURCE_LSE) || \ - ((SOURCE) == RCC_UART4CLKSOURCE_HSI)) - -#define IS_RCC_UART5CLKSOURCE(SOURCE) \ - (((SOURCE) == RCC_UART5CLKSOURCE_PCLK1) || \ - ((SOURCE) == RCC_UART5CLKSOURCE_SYSCLK) || \ - ((SOURCE) == RCC_UART5CLKSOURCE_LSE) || \ - ((SOURCE) == RCC_UART5CLKSOURCE_HSI)) - -#define IS_RCC_USART6CLKSOURCE(SOURCE) \ - (((SOURCE) == RCC_USART6CLKSOURCE_PCLK2) || \ - ((SOURCE) == RCC_USART6CLKSOURCE_SYSCLK) || \ - ((SOURCE) == RCC_USART6CLKSOURCE_LSE) || \ - ((SOURCE) == RCC_USART6CLKSOURCE_HSI)) - -#define IS_RCC_UART7CLKSOURCE(SOURCE) \ - (((SOURCE) == RCC_UART7CLKSOURCE_PCLK1) || \ - ((SOURCE) == RCC_UART7CLKSOURCE_SYSCLK) || \ - ((SOURCE) == RCC_UART7CLKSOURCE_LSE) || \ - ((SOURCE) == RCC_UART7CLKSOURCE_HSI)) - -#define IS_RCC_UART8CLKSOURCE(SOURCE) \ - (((SOURCE) == RCC_UART8CLKSOURCE_PCLK1) || \ - ((SOURCE) == RCC_UART8CLKSOURCE_SYSCLK) || \ - ((SOURCE) == RCC_UART8CLKSOURCE_LSE) || \ - ((SOURCE) == RCC_UART8CLKSOURCE_HSI)) -#define IS_RCC_I2C1CLKSOURCE(SOURCE) \ - (((SOURCE) == RCC_I2C1CLKSOURCE_PCLK1) || \ - ((SOURCE) == RCC_I2C1CLKSOURCE_SYSCLK)|| \ - ((SOURCE) == RCC_I2C1CLKSOURCE_HSI)) -#define IS_RCC_I2C2CLKSOURCE(SOURCE) \ - (((SOURCE) == RCC_I2C2CLKSOURCE_PCLK1) || \ - ((SOURCE) == RCC_I2C2CLKSOURCE_SYSCLK)|| \ - ((SOURCE) == RCC_I2C2CLKSOURCE_HSI)) - -#define IS_RCC_I2C3CLKSOURCE(SOURCE) \ - (((SOURCE) == RCC_I2C3CLKSOURCE_PCLK1) || \ - ((SOURCE) == RCC_I2C3CLKSOURCE_SYSCLK)|| \ - ((SOURCE) == RCC_I2C3CLKSOURCE_HSI)) -#define IS_RCC_I2C4CLKSOURCE(SOURCE) \ - (((SOURCE) == RCC_I2C4CLKSOURCE_PCLK1) || \ - ((SOURCE) == RCC_I2C4CLKSOURCE_SYSCLK)|| \ - ((SOURCE) == RCC_I2C4CLKSOURCE_HSI)) -#define IS_RCC_LPTIM1CLK(SOURCE) \ - (((SOURCE) == RCC_LPTIM1CLKSOURCE_PCLK1) || \ - ((SOURCE) == RCC_LPTIM1CLKSOURCE_LSI) || \ - ((SOURCE) == RCC_LPTIM1CLKSOURCE_HSI) || \ - ((SOURCE) == RCC_LPTIM1CLKSOURCE_LSE)) -#define IS_RCC_CLK48SOURCE(SOURCE) \ - (((SOURCE) == RCC_CLK48SOURCE_PLLSAIP) || \ - ((SOURCE) == RCC_CLK48SOURCE_PLL)) -#define IS_RCC_TIMPRES(VALUE) \ - (((VALUE) == RCC_TIMPRES_DESACTIVATED) || \ - ((VALUE) == RCC_TIMPRES_ACTIVATED)) - -#if defined (STM32F722xx) || defined (STM32F723xx) || defined (STM32F732xx) || defined (STM32F733xx) || defined (STM32F745xx) ||\ - defined (STM32F746xx) || defined (STM32F756xx) || defined (STM32F730xx) || defined (STM32F750xx) -#define IS_RCC_SAI1CLKSOURCE(SOURCE) (((SOURCE) == RCC_SAI1CLKSOURCE_PLLSAI) || \ - ((SOURCE) == RCC_SAI1CLKSOURCE_PLLI2S) || \ - ((SOURCE) == RCC_SAI1CLKSOURCE_PIN)) -#define IS_RCC_SAI2CLKSOURCE(SOURCE) (((SOURCE) == RCC_SAI2CLKSOURCE_PLLSAI) || \ - ((SOURCE) == RCC_SAI2CLKSOURCE_PLLI2S) || \ - ((SOURCE) == RCC_SAI2CLKSOURCE_PIN)) -#endif /* STM32F722xx || STM32F723xx || STM32F732xx || STM32F733xx || STM32F745xx || STM32F746xx || STM32F756xx || STM32F750xx || STM32F730xx */ - -#if defined (STM32F765xx) || defined (STM32F767xx) || defined (STM32F769xx) || defined (STM32F777xx) || defined (STM32F779xx) -#define IS_RCC_PLLR_VALUE(VALUE) ((2 <= (VALUE)) && ((VALUE) <= 7)) - -#define IS_RCC_SAI1CLKSOURCE(SOURCE) (((SOURCE) == RCC_SAI1CLKSOURCE_PLLSAI) || \ - ((SOURCE) == RCC_SAI1CLKSOURCE_PLLI2S) || \ - ((SOURCE) == RCC_SAI1CLKSOURCE_PIN) || \ - ((SOURCE) == RCC_SAI1CLKSOURCE_PLLSRC)) - -#define IS_RCC_SAI2CLKSOURCE(SOURCE) (((SOURCE) == RCC_SAI2CLKSOURCE_PLLSAI) || \ - ((SOURCE) == RCC_SAI2CLKSOURCE_PLLI2S) || \ - ((SOURCE) == RCC_SAI2CLKSOURCE_PIN) || \ - ((SOURCE) == RCC_SAI2CLKSOURCE_PLLSRC)) - -#define IS_RCC_DFSDM1CLKSOURCE(SOURCE) (((SOURCE) == RCC_DFSDM1CLKSOURCE_PCLK2) || \ - ((SOURCE) == RCC_DFSDM1CLKSOURCE_SYSCLK)) - -#define IS_RCC_DFSDM1AUDIOCLKSOURCE(SOURCE) (((SOURCE) == RCC_DFSDM1AUDIOCLKSOURCE_SAI1) || \ - ((SOURCE) == RCC_DFSDM1AUDIOCLKSOURCE_SAI2)) -#endif /* STM32F767xx || STM32F769xx || STM32F777xx || STM32F779xx */ - -#if defined (STM32F722xx) || defined (STM32F723xx) || defined (STM32F732xx) || defined (STM32F733xx) || defined (STM32F765xx) ||\ - defined (STM32F767xx) || defined (STM32F769xx) || defined (STM32F777xx) || defined (STM32F779xx) || defined (STM32F730xx) -#define IS_RCC_SDMMC2CLKSOURCE(SOURCE) (((SOURCE) == RCC_SDMMC2CLKSOURCE_SYSCLK) || \ - ((SOURCE) == RCC_SDMMC2CLKSOURCE_CLK48)) -#endif /* STM32F722xx || STM32F723xx || STM32F732xx || STM32F733xx || STM32F767xx || STM32F769xx || STM32F777xx || STM32F779xx || STM32F730xx */ - -#if defined (STM32F767xx) || defined (STM32F769xx) || defined (STM32F777xx) || defined (STM32F779xx) -#define IS_RCC_DSIBYTELANECLKSOURCE(SOURCE) (((SOURCE) == RCC_DSICLKSOURCE_PLLR) ||\ - ((SOURCE) == RCC_DSICLKSOURCE_DSIPHY)) -#endif /* STM32F767xx || STM32F769xx || STM32F777xx || STM32F779xx */ - -/** - * @} - */ - -/** - * @} - */ - -/** - * @} - */ - -/** - * @} - */ -#ifdef __cplusplus -} -#endif - -#endif /* __STM32F7xx_HAL_RCC_EX_H */ - -/************************ (C) COPYRIGHT STMicroelectronics *****END OF FILE****/ diff --git a/test_dma/Drivers/STM32F7xx_HAL_Driver/Inc/stm32f7xx_hal_tim.h b/test_dma/Drivers/STM32F7xx_HAL_Driver/Inc/stm32f7xx_hal_tim.h deleted file mode 100644 index 6a29ae5..0000000 --- a/test_dma/Drivers/STM32F7xx_HAL_Driver/Inc/stm32f7xx_hal_tim.h +++ /dev/null @@ -1,2166 +0,0 @@ -/** - ****************************************************************************** - * @file stm32f7xx_hal_tim.h - * @author MCD Application Team - * @brief Header file of TIM HAL module. - ****************************************************************************** - * @attention - * - *

© Copyright (c) 2017 STMicroelectronics. - * All rights reserved.

- * - * This software component is licensed by ST under BSD 3-Clause license, - * the "License"; You may not use this file except in compliance with the - * License. You may obtain a copy of the License at: - * opensource.org/licenses/BSD-3-Clause - * - ****************************************************************************** - */ - -/* Define to prevent recursive inclusion -------------------------------------*/ -#ifndef STM32F7xx_HAL_TIM_H -#define STM32F7xx_HAL_TIM_H - -#ifdef __cplusplus -extern "C" { -#endif - -/* Includes ------------------------------------------------------------------*/ -#include "stm32f7xx_hal_def.h" - -/** @addtogroup STM32F7xx_HAL_Driver - * @{ - */ - -/** @addtogroup TIM - * @{ - */ - -/* Exported types ------------------------------------------------------------*/ -/** @defgroup TIM_Exported_Types TIM Exported Types - * @{ - */ - -/** - * @brief TIM Time base Configuration Structure definition - */ -typedef struct -{ - uint32_t Prescaler; /*!< Specifies the prescaler value used to divide the TIM clock. - This parameter can be a number between Min_Data = 0x0000 and Max_Data = 0xFFFF */ - - uint32_t CounterMode; /*!< Specifies the counter mode. - This parameter can be a value of @ref TIM_Counter_Mode */ - - uint32_t Period; /*!< Specifies the period value to be loaded into the active - Auto-Reload Register at the next update event. - This parameter can be a number between Min_Data = 0x0000 and Max_Data = 0xFFFF. */ - - uint32_t ClockDivision; /*!< Specifies the clock division. - This parameter can be a value of @ref TIM_ClockDivision */ - - uint32_t RepetitionCounter; /*!< Specifies the repetition counter value. Each time the RCR downcounter - reaches zero, an update event is generated and counting restarts - from the RCR value (N). - This means in PWM mode that (N+1) corresponds to: - - the number of PWM periods in edge-aligned mode - - the number of half PWM period in center-aligned mode - GP timers: this parameter must be a number between Min_Data = 0x00 and Max_Data = 0xFF. - Advanced timers: this parameter must be a number between Min_Data = 0x0000 and Max_Data = 0xFFFF. */ - - uint32_t AutoReloadPreload; /*!< Specifies the auto-reload preload. - This parameter can be a value of @ref TIM_AutoReloadPreload */ -} TIM_Base_InitTypeDef; - -/** - * @brief TIM Output Compare Configuration Structure definition - */ -typedef struct -{ - uint32_t OCMode; /*!< Specifies the TIM mode. - This parameter can be a value of @ref TIM_Output_Compare_and_PWM_modes */ - - uint32_t Pulse; /*!< Specifies the pulse value to be loaded into the Capture Compare Register. - This parameter can be a number between Min_Data = 0x0000 and Max_Data = 0xFFFF */ - - uint32_t OCPolarity; /*!< Specifies the output polarity. - This parameter can be a value of @ref TIM_Output_Compare_Polarity */ - - uint32_t OCNPolarity; /*!< Specifies the complementary output polarity. - This parameter can be a value of @ref TIM_Output_Compare_N_Polarity - @note This parameter is valid only for timer instances supporting break feature. */ - - uint32_t OCFastMode; /*!< Specifies the Fast mode state. - This parameter can be a value of @ref TIM_Output_Fast_State - @note This parameter is valid only in PWM1 and PWM2 mode. */ - - - uint32_t OCIdleState; /*!< Specifies the TIM Output Compare pin state during Idle state. - This parameter can be a value of @ref TIM_Output_Compare_Idle_State - @note This parameter is valid only for timer instances supporting break feature. */ - - uint32_t OCNIdleState; /*!< Specifies the TIM Output Compare pin state during Idle state. - This parameter can be a value of @ref TIM_Output_Compare_N_Idle_State - @note This parameter is valid only for timer instances supporting break feature. */ -} TIM_OC_InitTypeDef; - -/** - * @brief TIM One Pulse Mode Configuration Structure definition - */ -typedef struct -{ - uint32_t OCMode; /*!< Specifies the TIM mode. - This parameter can be a value of @ref TIM_Output_Compare_and_PWM_modes */ - - uint32_t Pulse; /*!< Specifies the pulse value to be loaded into the Capture Compare Register. - This parameter can be a number between Min_Data = 0x0000 and Max_Data = 0xFFFF */ - - uint32_t OCPolarity; /*!< Specifies the output polarity. - This parameter can be a value of @ref TIM_Output_Compare_Polarity */ - - uint32_t OCNPolarity; /*!< Specifies the complementary output polarity. - This parameter can be a value of @ref TIM_Output_Compare_N_Polarity - @note This parameter is valid only for timer instances supporting break feature. */ - - uint32_t OCIdleState; /*!< Specifies the TIM Output Compare pin state during Idle state. - This parameter can be a value of @ref TIM_Output_Compare_Idle_State - @note This parameter is valid only for timer instances supporting break feature. */ - - uint32_t OCNIdleState; /*!< Specifies the TIM Output Compare pin state during Idle state. - This parameter can be a value of @ref TIM_Output_Compare_N_Idle_State - @note This parameter is valid only for timer instances supporting break feature. */ - - uint32_t ICPolarity; /*!< Specifies the active edge of the input signal. - This parameter can be a value of @ref TIM_Input_Capture_Polarity */ - - uint32_t ICSelection; /*!< Specifies the input. - This parameter can be a value of @ref TIM_Input_Capture_Selection */ - - uint32_t ICFilter; /*!< Specifies the input capture filter. - This parameter can be a number between Min_Data = 0x0 and Max_Data = 0xF */ -} TIM_OnePulse_InitTypeDef; - -/** - * @brief TIM Input Capture Configuration Structure definition - */ -typedef struct -{ - uint32_t ICPolarity; /*!< Specifies the active edge of the input signal. - This parameter can be a value of @ref TIM_Input_Capture_Polarity */ - - uint32_t ICSelection; /*!< Specifies the input. - This parameter can be a value of @ref TIM_Input_Capture_Selection */ - - uint32_t ICPrescaler; /*!< Specifies the Input Capture Prescaler. - This parameter can be a value of @ref TIM_Input_Capture_Prescaler */ - - uint32_t ICFilter; /*!< Specifies the input capture filter. - This parameter can be a number between Min_Data = 0x0 and Max_Data = 0xF */ -} TIM_IC_InitTypeDef; - -/** - * @brief TIM Encoder Configuration Structure definition - */ -typedef struct -{ - uint32_t EncoderMode; /*!< Specifies the active edge of the input signal. - This parameter can be a value of @ref TIM_Encoder_Mode */ - - uint32_t IC1Polarity; /*!< Specifies the active edge of the input signal. - This parameter can be a value of @ref TIM_Input_Capture_Polarity */ - - uint32_t IC1Selection; /*!< Specifies the input. - This parameter can be a value of @ref TIM_Input_Capture_Selection */ - - uint32_t IC1Prescaler; /*!< Specifies the Input Capture Prescaler. - This parameter can be a value of @ref TIM_Input_Capture_Prescaler */ - - uint32_t IC1Filter; /*!< Specifies the input capture filter. - This parameter can be a number between Min_Data = 0x0 and Max_Data = 0xF */ - - uint32_t IC2Polarity; /*!< Specifies the active edge of the input signal. - This parameter can be a value of @ref TIM_Input_Capture_Polarity */ - - uint32_t IC2Selection; /*!< Specifies the input. - This parameter can be a value of @ref TIM_Input_Capture_Selection */ - - uint32_t IC2Prescaler; /*!< Specifies the Input Capture Prescaler. - This parameter can be a value of @ref TIM_Input_Capture_Prescaler */ - - uint32_t IC2Filter; /*!< Specifies the input capture filter. - This parameter can be a number between Min_Data = 0x0 and Max_Data = 0xF */ -} TIM_Encoder_InitTypeDef; - -/** - * @brief Clock Configuration Handle Structure definition - */ -typedef struct -{ - uint32_t ClockSource; /*!< TIM clock sources - This parameter can be a value of @ref TIM_Clock_Source */ - uint32_t ClockPolarity; /*!< TIM clock polarity - This parameter can be a value of @ref TIM_Clock_Polarity */ - uint32_t ClockPrescaler; /*!< TIM clock prescaler - This parameter can be a value of @ref TIM_Clock_Prescaler */ - uint32_t ClockFilter; /*!< TIM clock filter - This parameter can be a number between Min_Data = 0x0 and Max_Data = 0xF */ -} TIM_ClockConfigTypeDef; - -/** - * @brief TIM Clear Input Configuration Handle Structure definition - */ -typedef struct -{ - uint32_t ClearInputState; /*!< TIM clear Input state - This parameter can be ENABLE or DISABLE */ - uint32_t ClearInputSource; /*!< TIM clear Input sources - This parameter can be a value of @ref TIM_ClearInput_Source */ - uint32_t ClearInputPolarity; /*!< TIM Clear Input polarity - This parameter can be a value of @ref TIM_ClearInput_Polarity */ - uint32_t ClearInputPrescaler; /*!< TIM Clear Input prescaler - This parameter must be 0: When OCRef clear feature is used with ETR source, ETR prescaler must be off */ - uint32_t ClearInputFilter; /*!< TIM Clear Input filter - This parameter can be a number between Min_Data = 0x0 and Max_Data = 0xF */ -} TIM_ClearInputConfigTypeDef; - -/** - * @brief TIM Master configuration Structure definition - * @note Advanced timers provide TRGO2 internal line which is redirected - * to the ADC - */ -typedef struct -{ - uint32_t MasterOutputTrigger; /*!< Trigger output (TRGO) selection - This parameter can be a value of @ref TIM_Master_Mode_Selection */ - uint32_t MasterOutputTrigger2; /*!< Trigger output2 (TRGO2) selection - This parameter can be a value of @ref TIM_Master_Mode_Selection_2 */ - uint32_t MasterSlaveMode; /*!< Master/slave mode selection - This parameter can be a value of @ref TIM_Master_Slave_Mode */ -} TIM_MasterConfigTypeDef; - -/** - * @brief TIM Slave configuration Structure definition - */ -typedef struct -{ - uint32_t SlaveMode; /*!< Slave mode selection - This parameter can be a value of @ref TIM_Slave_Mode */ - uint32_t InputTrigger; /*!< Input Trigger source - This parameter can be a value of @ref TIM_Trigger_Selection */ - uint32_t TriggerPolarity; /*!< Input Trigger polarity - This parameter can be a value of @ref TIM_Trigger_Polarity */ - uint32_t TriggerPrescaler; /*!< Input trigger prescaler - This parameter can be a value of @ref TIM_Trigger_Prescaler */ - uint32_t TriggerFilter; /*!< Input trigger filter - This parameter can be a number between Min_Data = 0x0 and Max_Data = 0xF */ - -} TIM_SlaveConfigTypeDef; - -/** - * @brief TIM Break input(s) and Dead time configuration Structure definition - * @note 2 break inputs can be configured (BKIN and BKIN2) with configurable - * filter and polarity. - */ -typedef struct -{ - uint32_t OffStateRunMode; /*!< TIM off state in run mode - This parameter can be a value of @ref TIM_OSSR_Off_State_Selection_for_Run_mode_state */ - uint32_t OffStateIDLEMode; /*!< TIM off state in IDLE mode - This parameter can be a value of @ref TIM_OSSI_Off_State_Selection_for_Idle_mode_state */ - uint32_t LockLevel; /*!< TIM Lock level - This parameter can be a value of @ref TIM_Lock_level */ - uint32_t DeadTime; /*!< TIM dead Time - This parameter can be a number between Min_Data = 0x00 and Max_Data = 0xFF */ - uint32_t BreakState; /*!< TIM Break State - This parameter can be a value of @ref TIM_Break_Input_enable_disable */ - uint32_t BreakPolarity; /*!< TIM Break input polarity - This parameter can be a value of @ref TIM_Break_Polarity */ - uint32_t BreakFilter; /*!< Specifies the break input filter. - This parameter can be a number between Min_Data = 0x0 and Max_Data = 0xF */ - uint32_t Break2State; /*!< TIM Break2 State - This parameter can be a value of @ref TIM_Break2_Input_enable_disable */ - uint32_t Break2Polarity; /*!< TIM Break2 input polarity - This parameter can be a value of @ref TIM_Break2_Polarity */ - uint32_t Break2Filter; /*!< TIM break2 input filter. - This parameter can be a number between Min_Data = 0x0 and Max_Data = 0xF */ - uint32_t AutomaticOutput; /*!< TIM Automatic Output Enable state - This parameter can be a value of @ref TIM_AOE_Bit_Set_Reset */ -} TIM_BreakDeadTimeConfigTypeDef; - -/** - * @brief HAL State structures definition - */ -typedef enum -{ - HAL_TIM_STATE_RESET = 0x00U, /*!< Peripheral not yet initialized or disabled */ - HAL_TIM_STATE_READY = 0x01U, /*!< Peripheral Initialized and ready for use */ - HAL_TIM_STATE_BUSY = 0x02U, /*!< An internal process is ongoing */ - HAL_TIM_STATE_TIMEOUT = 0x03U, /*!< Timeout state */ - HAL_TIM_STATE_ERROR = 0x04U /*!< Reception process is ongoing */ -} HAL_TIM_StateTypeDef; - -/** - * @brief HAL Active channel structures definition - */ -typedef enum -{ - HAL_TIM_ACTIVE_CHANNEL_1 = 0x01U, /*!< The active channel is 1 */ - HAL_TIM_ACTIVE_CHANNEL_2 = 0x02U, /*!< The active channel is 2 */ - HAL_TIM_ACTIVE_CHANNEL_3 = 0x04U, /*!< The active channel is 3 */ - HAL_TIM_ACTIVE_CHANNEL_4 = 0x08U, /*!< The active channel is 4 */ - HAL_TIM_ACTIVE_CHANNEL_5 = 0x10U, /*!< The active channel is 5 */ - HAL_TIM_ACTIVE_CHANNEL_6 = 0x20U, /*!< The active channel is 6 */ - HAL_TIM_ACTIVE_CHANNEL_CLEARED = 0x00U /*!< All active channels cleared */ -} HAL_TIM_ActiveChannel; - -/** - * @brief TIM Time Base Handle Structure definition - */ -#if (USE_HAL_TIM_REGISTER_CALLBACKS == 1) -typedef struct __TIM_HandleTypeDef -#else -typedef struct -#endif /* USE_HAL_TIM_REGISTER_CALLBACKS */ -{ - TIM_TypeDef *Instance; /*!< Register base address */ - TIM_Base_InitTypeDef Init; /*!< TIM Time Base required parameters */ - HAL_TIM_ActiveChannel Channel; /*!< Active channel */ - DMA_HandleTypeDef *hdma[7]; /*!< DMA Handlers array - This array is accessed by a @ref DMA_Handle_index */ - HAL_LockTypeDef Lock; /*!< Locking object */ - __IO HAL_TIM_StateTypeDef State; /*!< TIM operation state */ - -#if (USE_HAL_TIM_REGISTER_CALLBACKS == 1) - void (* Base_MspInitCallback)(struct __TIM_HandleTypeDef *htim); /*!< TIM Base Msp Init Callback */ - void (* Base_MspDeInitCallback)(struct __TIM_HandleTypeDef *htim); /*!< TIM Base Msp DeInit Callback */ - void (* IC_MspInitCallback)(struct __TIM_HandleTypeDef *htim); /*!< TIM IC Msp Init Callback */ - void (* IC_MspDeInitCallback)(struct __TIM_HandleTypeDef *htim); /*!< TIM IC Msp DeInit Callback */ - void (* OC_MspInitCallback)(struct __TIM_HandleTypeDef *htim); /*!< TIM OC Msp Init Callback */ - void (* OC_MspDeInitCallback)(struct __TIM_HandleTypeDef *htim); /*!< TIM OC Msp DeInit Callback */ - void (* PWM_MspInitCallback)(struct __TIM_HandleTypeDef *htim); /*!< TIM PWM Msp Init Callback */ - void (* PWM_MspDeInitCallback)(struct __TIM_HandleTypeDef *htim); /*!< TIM PWM Msp DeInit Callback */ - void (* OnePulse_MspInitCallback)(struct __TIM_HandleTypeDef *htim); /*!< TIM One Pulse Msp Init Callback */ - void (* OnePulse_MspDeInitCallback)(struct __TIM_HandleTypeDef *htim); /*!< TIM One Pulse Msp DeInit Callback */ - void (* Encoder_MspInitCallback)(struct __TIM_HandleTypeDef *htim); /*!< TIM Encoder Msp Init Callback */ - void (* Encoder_MspDeInitCallback)(struct __TIM_HandleTypeDef *htim); /*!< TIM Encoder Msp DeInit Callback */ - void (* HallSensor_MspInitCallback)(struct __TIM_HandleTypeDef *htim); /*!< TIM Hall Sensor Msp Init Callback */ - void (* HallSensor_MspDeInitCallback)(struct __TIM_HandleTypeDef *htim); /*!< TIM Hall Sensor Msp DeInit Callback */ - void (* PeriodElapsedCallback)(struct __TIM_HandleTypeDef *htim); /*!< TIM Period Elapsed Callback */ - void (* PeriodElapsedHalfCpltCallback)(struct __TIM_HandleTypeDef *htim); /*!< TIM Period Elapsed half complete Callback */ - void (* TriggerCallback)(struct __TIM_HandleTypeDef *htim); /*!< TIM Trigger Callback */ - void (* TriggerHalfCpltCallback)(struct __TIM_HandleTypeDef *htim); /*!< TIM Trigger half complete Callback */ - void (* IC_CaptureCallback)(struct __TIM_HandleTypeDef *htim); /*!< TIM Input Capture Callback */ - void (* IC_CaptureHalfCpltCallback)(struct __TIM_HandleTypeDef *htim); /*!< TIM Input Capture half complete Callback */ - void (* OC_DelayElapsedCallback)(struct __TIM_HandleTypeDef *htim); /*!< TIM Output Compare Delay Elapsed Callback */ - void (* PWM_PulseFinishedCallback)(struct __TIM_HandleTypeDef *htim); /*!< TIM PWM Pulse Finished Callback */ - void (* PWM_PulseFinishedHalfCpltCallback)(struct __TIM_HandleTypeDef *htim); /*!< TIM PWM Pulse Finished half complete Callback */ - void (* ErrorCallback)(struct __TIM_HandleTypeDef *htim); /*!< TIM Error Callback */ - void (* CommutationCallback)(struct __TIM_HandleTypeDef *htim); /*!< TIM Commutation Callback */ - void (* CommutationHalfCpltCallback)(struct __TIM_HandleTypeDef *htim); /*!< TIM Commutation half complete Callback */ - void (* BreakCallback)(struct __TIM_HandleTypeDef *htim); /*!< TIM Break Callback */ - void (* Break2Callback)(struct __TIM_HandleTypeDef *htim); /*!< TIM Break2 Callback */ -#endif /* USE_HAL_TIM_REGISTER_CALLBACKS */ -} TIM_HandleTypeDef; - -#if (USE_HAL_TIM_REGISTER_CALLBACKS == 1) -/** - * @brief HAL TIM Callback ID enumeration definition - */ -typedef enum -{ - HAL_TIM_BASE_MSPINIT_CB_ID = 0x00U /*!< TIM Base MspInit Callback ID */ - ,HAL_TIM_BASE_MSPDEINIT_CB_ID = 0x01U /*!< TIM Base MspDeInit Callback ID */ - ,HAL_TIM_IC_MSPINIT_CB_ID = 0x02U /*!< TIM IC MspInit Callback ID */ - ,HAL_TIM_IC_MSPDEINIT_CB_ID = 0x03U /*!< TIM IC MspDeInit Callback ID */ - ,HAL_TIM_OC_MSPINIT_CB_ID = 0x04U /*!< TIM OC MspInit Callback ID */ - ,HAL_TIM_OC_MSPDEINIT_CB_ID = 0x05U /*!< TIM OC MspDeInit Callback ID */ - ,HAL_TIM_PWM_MSPINIT_CB_ID = 0x06U /*!< TIM PWM MspInit Callback ID */ - ,HAL_TIM_PWM_MSPDEINIT_CB_ID = 0x07U /*!< TIM PWM MspDeInit Callback ID */ - ,HAL_TIM_ONE_PULSE_MSPINIT_CB_ID = 0x08U /*!< TIM One Pulse MspInit Callback ID */ - ,HAL_TIM_ONE_PULSE_MSPDEINIT_CB_ID = 0x09U /*!< TIM One Pulse MspDeInit Callback ID */ - ,HAL_TIM_ENCODER_MSPINIT_CB_ID = 0x0AU /*!< TIM Encoder MspInit Callback ID */ - ,HAL_TIM_ENCODER_MSPDEINIT_CB_ID = 0x0BU /*!< TIM Encoder MspDeInit Callback ID */ - ,HAL_TIM_HALL_SENSOR_MSPINIT_CB_ID = 0x0CU /*!< TIM Hall Sensor MspDeInit Callback ID */ - ,HAL_TIM_HALL_SENSOR_MSPDEINIT_CB_ID = 0x0DU /*!< TIM Hall Sensor MspDeInit Callback ID */ - ,HAL_TIM_PERIOD_ELAPSED_CB_ID = 0x0EU /*!< TIM Period Elapsed Callback ID */ - ,HAL_TIM_PERIOD_ELAPSED_HALF_CB_ID = 0x0FU /*!< TIM Period Elapsed half complete Callback ID */ - ,HAL_TIM_TRIGGER_CB_ID = 0x10U /*!< TIM Trigger Callback ID */ - ,HAL_TIM_TRIGGER_HALF_CB_ID = 0x11U /*!< TIM Trigger half complete Callback ID */ - - ,HAL_TIM_IC_CAPTURE_CB_ID = 0x12U /*!< TIM Input Capture Callback ID */ - ,HAL_TIM_IC_CAPTURE_HALF_CB_ID = 0x13U /*!< TIM Input Capture half complete Callback ID */ - ,HAL_TIM_OC_DELAY_ELAPSED_CB_ID = 0x14U /*!< TIM Output Compare Delay Elapsed Callback ID */ - ,HAL_TIM_PWM_PULSE_FINISHED_CB_ID = 0x15U /*!< TIM PWM Pulse Finished Callback ID */ - ,HAL_TIM_PWM_PULSE_FINISHED_HALF_CB_ID = 0x16U /*!< TIM PWM Pulse Finished half complete Callback ID */ - ,HAL_TIM_ERROR_CB_ID = 0x17U /*!< TIM Error Callback ID */ - ,HAL_TIM_COMMUTATION_CB_ID = 0x18U /*!< TIM Commutation Callback ID */ - ,HAL_TIM_COMMUTATION_HALF_CB_ID = 0x19U /*!< TIM Commutation half complete Callback ID */ - ,HAL_TIM_BREAK_CB_ID = 0x1AU /*!< TIM Break Callback ID */ - ,HAL_TIM_BREAK2_CB_ID = 0x1BU /*!< TIM Break2 Callback ID */ -} HAL_TIM_CallbackIDTypeDef; - -/** - * @brief HAL TIM Callback pointer definition - */ -typedef void (*pTIM_CallbackTypeDef)(TIM_HandleTypeDef *htim); /*!< pointer to the TIM callback function */ - -#endif /* USE_HAL_TIM_REGISTER_CALLBACKS */ - -/** - * @} - */ -/* End of exported types -----------------------------------------------------*/ - -/* Exported constants --------------------------------------------------------*/ -/** @defgroup TIM_Exported_Constants TIM Exported Constants - * @{ - */ - -/** @defgroup TIM_ClearInput_Source TIM Clear Input Source - * @{ - */ -#define TIM_CLEARINPUTSOURCE_NONE 0x00000000U /*!< OCREF_CLR is disabled */ -#define TIM_CLEARINPUTSOURCE_ETR 0x00000001U /*!< OCREF_CLR is connected to ETRF input */ -/** - * @} - */ - -/** @defgroup TIM_DMA_Base_address TIM DMA Base Address - * @{ - */ -#define TIM_DMABASE_CR1 0x00000000U -#define TIM_DMABASE_CR2 0x00000001U -#define TIM_DMABASE_SMCR 0x00000002U -#define TIM_DMABASE_DIER 0x00000003U -#define TIM_DMABASE_SR 0x00000004U -#define TIM_DMABASE_EGR 0x00000005U -#define TIM_DMABASE_CCMR1 0x00000006U -#define TIM_DMABASE_CCMR2 0x00000007U -#define TIM_DMABASE_CCER 0x00000008U -#define TIM_DMABASE_CNT 0x00000009U -#define TIM_DMABASE_PSC 0x0000000AU -#define TIM_DMABASE_ARR 0x0000000BU -#define TIM_DMABASE_RCR 0x0000000CU -#define TIM_DMABASE_CCR1 0x0000000DU -#define TIM_DMABASE_CCR2 0x0000000EU -#define TIM_DMABASE_CCR3 0x0000000FU -#define TIM_DMABASE_CCR4 0x00000010U -#define TIM_DMABASE_BDTR 0x00000011U -#define TIM_DMABASE_DCR 0x00000012U -#define TIM_DMABASE_DMAR 0x00000013U -#define TIM_DMABASE_OR 0x00000014U -#define TIM_DMABASE_CCMR3 0x00000015U -#define TIM_DMABASE_CCR5 0x00000016U -#define TIM_DMABASE_CCR6 0x00000017U -#if defined(TIM_BREAK_INPUT_SUPPORT) -#define TIM_DMABASE_AF1 0x00000018U -#define TIM_DMABASE_AF2 0x00000019U -#endif /* TIM_BREAK_INPUT_SUPPORT */ -/** - * @} - */ - -/** @defgroup TIM_Event_Source TIM Event Source - * @{ - */ -#define TIM_EVENTSOURCE_UPDATE TIM_EGR_UG /*!< Reinitialize the counter and generates an update of the registers */ -#define TIM_EVENTSOURCE_CC1 TIM_EGR_CC1G /*!< A capture/compare event is generated on channel 1 */ -#define TIM_EVENTSOURCE_CC2 TIM_EGR_CC2G /*!< A capture/compare event is generated on channel 2 */ -#define TIM_EVENTSOURCE_CC3 TIM_EGR_CC3G /*!< A capture/compare event is generated on channel 3 */ -#define TIM_EVENTSOURCE_CC4 TIM_EGR_CC4G /*!< A capture/compare event is generated on channel 4 */ -#define TIM_EVENTSOURCE_COM TIM_EGR_COMG /*!< A commutation event is generated */ -#define TIM_EVENTSOURCE_TRIGGER TIM_EGR_TG /*!< A trigger event is generated */ -#define TIM_EVENTSOURCE_BREAK TIM_EGR_BG /*!< A break event is generated */ -#define TIM_EVENTSOURCE_BREAK2 TIM_EGR_B2G /*!< A break 2 event is generated */ -/** - * @} - */ - -/** @defgroup TIM_Input_Channel_Polarity TIM Input Channel polarity - * @{ - */ -#define TIM_INPUTCHANNELPOLARITY_RISING 0x00000000U /*!< Polarity for TIx source */ -#define TIM_INPUTCHANNELPOLARITY_FALLING TIM_CCER_CC1P /*!< Polarity for TIx source */ -#define TIM_INPUTCHANNELPOLARITY_BOTHEDGE (TIM_CCER_CC1P | TIM_CCER_CC1NP) /*!< Polarity for TIx source */ -/** - * @} - */ - -/** @defgroup TIM_ETR_Polarity TIM ETR Polarity - * @{ - */ -#define TIM_ETRPOLARITY_INVERTED TIM_SMCR_ETP /*!< Polarity for ETR source */ -#define TIM_ETRPOLARITY_NONINVERTED 0x00000000U /*!< Polarity for ETR source */ -/** - * @} - */ - -/** @defgroup TIM_ETR_Prescaler TIM ETR Prescaler - * @{ - */ -#define TIM_ETRPRESCALER_DIV1 0x00000000U /*!< No prescaler is used */ -#define TIM_ETRPRESCALER_DIV2 TIM_SMCR_ETPS_0 /*!< ETR input source is divided by 2 */ -#define TIM_ETRPRESCALER_DIV4 TIM_SMCR_ETPS_1 /*!< ETR input source is divided by 4 */ -#define TIM_ETRPRESCALER_DIV8 TIM_SMCR_ETPS /*!< ETR input source is divided by 8 */ -/** - * @} - */ - -/** @defgroup TIM_Counter_Mode TIM Counter Mode - * @{ - */ -#define TIM_COUNTERMODE_UP 0x00000000U /*!< Counter used as up-counter */ -#define TIM_COUNTERMODE_DOWN TIM_CR1_DIR /*!< Counter used as down-counter */ -#define TIM_COUNTERMODE_CENTERALIGNED1 TIM_CR1_CMS_0 /*!< Center-aligned mode 1 */ -#define TIM_COUNTERMODE_CENTERALIGNED2 TIM_CR1_CMS_1 /*!< Center-aligned mode 2 */ -#define TIM_COUNTERMODE_CENTERALIGNED3 TIM_CR1_CMS /*!< Center-aligned mode 3 */ -/** - * @} - */ - -/** @defgroup TIM_ClockDivision TIM Clock Division - * @{ - */ -#define TIM_CLOCKDIVISION_DIV1 0x00000000U /*!< Clock division: tDTS=tCK_INT */ -#define TIM_CLOCKDIVISION_DIV2 TIM_CR1_CKD_0 /*!< Clock division: tDTS=2*tCK_INT */ -#define TIM_CLOCKDIVISION_DIV4 TIM_CR1_CKD_1 /*!< Clock division: tDTS=4*tCK_INT */ -/** - * @} - */ - -/** @defgroup TIM_Output_Compare_State TIM Output Compare State - * @{ - */ -#define TIM_OUTPUTSTATE_DISABLE 0x00000000U /*!< Capture/Compare 1 output disabled */ -#define TIM_OUTPUTSTATE_ENABLE TIM_CCER_CC1E /*!< Capture/Compare 1 output enabled */ -/** - * @} - */ - -/** @defgroup TIM_AutoReloadPreload TIM Auto-Reload Preload - * @{ - */ -#define TIM_AUTORELOAD_PRELOAD_DISABLE 0x00000000U /*!< TIMx_ARR register is not buffered */ -#define TIM_AUTORELOAD_PRELOAD_ENABLE TIM_CR1_ARPE /*!< TIMx_ARR register is buffered */ - -/** - * @} - */ - -/** @defgroup TIM_Output_Fast_State TIM Output Fast State - * @{ - */ -#define TIM_OCFAST_DISABLE 0x00000000U /*!< Output Compare fast disable */ -#define TIM_OCFAST_ENABLE TIM_CCMR1_OC1FE /*!< Output Compare fast enable */ -/** - * @} - */ - -/** @defgroup TIM_Output_Compare_N_State TIM Complementary Output Compare State - * @{ - */ -#define TIM_OUTPUTNSTATE_DISABLE 0x00000000U /*!< OCxN is disabled */ -#define TIM_OUTPUTNSTATE_ENABLE TIM_CCER_CC1NE /*!< OCxN is enabled */ -/** - * @} - */ - -/** @defgroup TIM_Output_Compare_Polarity TIM Output Compare Polarity - * @{ - */ -#define TIM_OCPOLARITY_HIGH 0x00000000U /*!< Capture/Compare output polarity */ -#define TIM_OCPOLARITY_LOW TIM_CCER_CC1P /*!< Capture/Compare output polarity */ -/** - * @} - */ - -/** @defgroup TIM_Output_Compare_N_Polarity TIM Complementary Output Compare Polarity - * @{ - */ -#define TIM_OCNPOLARITY_HIGH 0x00000000U /*!< Capture/Compare complementary output polarity */ -#define TIM_OCNPOLARITY_LOW TIM_CCER_CC1NP /*!< Capture/Compare complementary output polarity */ -/** - * @} - */ - -/** @defgroup TIM_Output_Compare_Idle_State TIM Output Compare Idle State - * @{ - */ -#define TIM_OCIDLESTATE_SET TIM_CR2_OIS1 /*!< Output Idle state: OCx=1 when MOE=0 */ -#define TIM_OCIDLESTATE_RESET 0x00000000U /*!< Output Idle state: OCx=0 when MOE=0 */ -/** - * @} - */ - -/** @defgroup TIM_Output_Compare_N_Idle_State TIM Complementary Output Compare Idle State - * @{ - */ -#define TIM_OCNIDLESTATE_SET TIM_CR2_OIS1N /*!< Complementary output Idle state: OCxN=1 when MOE=0 */ -#define TIM_OCNIDLESTATE_RESET 0x00000000U /*!< Complementary output Idle state: OCxN=0 when MOE=0 */ -/** - * @} - */ - -/** @defgroup TIM_Input_Capture_Polarity TIM Input Capture Polarity - * @{ - */ -#define TIM_ICPOLARITY_RISING TIM_INPUTCHANNELPOLARITY_RISING /*!< Capture triggered by rising edge on timer input */ -#define TIM_ICPOLARITY_FALLING TIM_INPUTCHANNELPOLARITY_FALLING /*!< Capture triggered by falling edge on timer input */ -#define TIM_ICPOLARITY_BOTHEDGE TIM_INPUTCHANNELPOLARITY_BOTHEDGE /*!< Capture triggered by both rising and falling edges on timer input*/ -/** - * @} - */ - -/** @defgroup TIM_Input_Capture_Selection TIM Input Capture Selection - * @{ - */ -#define TIM_ICSELECTION_DIRECTTI TIM_CCMR1_CC1S_0 /*!< TIM Input 1, 2, 3 or 4 is selected to be - connected to IC1, IC2, IC3 or IC4, respectively */ -#define TIM_ICSELECTION_INDIRECTTI TIM_CCMR1_CC1S_1 /*!< TIM Input 1, 2, 3 or 4 is selected to be - connected to IC2, IC1, IC4 or IC3, respectively */ -#define TIM_ICSELECTION_TRC TIM_CCMR1_CC1S /*!< TIM Input 1, 2, 3 or 4 is selected to be connected to TRC */ -/** - * @} - */ - -/** @defgroup TIM_Input_Capture_Prescaler TIM Input Capture Prescaler - * @{ - */ -#define TIM_ICPSC_DIV1 0x00000000U /*!< Capture performed each time an edge is detected on the capture input */ -#define TIM_ICPSC_DIV2 TIM_CCMR1_IC1PSC_0 /*!< Capture performed once every 2 events */ -#define TIM_ICPSC_DIV4 TIM_CCMR1_IC1PSC_1 /*!< Capture performed once every 4 events */ -#define TIM_ICPSC_DIV8 TIM_CCMR1_IC1PSC /*!< Capture performed once every 8 events */ -/** - * @} - */ - -/** @defgroup TIM_One_Pulse_Mode TIM One Pulse Mode - * @{ - */ -#define TIM_OPMODE_SINGLE TIM_CR1_OPM /*!< Counter stops counting at the next update event */ -#define TIM_OPMODE_REPETITIVE 0x00000000U /*!< Counter is not stopped at update event */ -/** - * @} - */ - -/** @defgroup TIM_Encoder_Mode TIM Encoder Mode - * @{ - */ -#define TIM_ENCODERMODE_TI1 TIM_SMCR_SMS_0 /*!< Quadrature encoder mode 1, x2 mode, counts up/down on TI1FP1 edge depending on TI2FP2 level */ -#define TIM_ENCODERMODE_TI2 TIM_SMCR_SMS_1 /*!< Quadrature encoder mode 2, x2 mode, counts up/down on TI2FP2 edge depending on TI1FP1 level. */ -#define TIM_ENCODERMODE_TI12 (TIM_SMCR_SMS_1 | TIM_SMCR_SMS_0) /*!< Quadrature encoder mode 3, x4 mode, counts up/down on both TI1FP1 and TI2FP2 edges depending on the level of the other input. */ -/** - * @} - */ - -/** @defgroup TIM_Interrupt_definition TIM interrupt Definition - * @{ - */ -#define TIM_IT_UPDATE TIM_DIER_UIE /*!< Update interrupt */ -#define TIM_IT_CC1 TIM_DIER_CC1IE /*!< Capture/Compare 1 interrupt */ -#define TIM_IT_CC2 TIM_DIER_CC2IE /*!< Capture/Compare 2 interrupt */ -#define TIM_IT_CC3 TIM_DIER_CC3IE /*!< Capture/Compare 3 interrupt */ -#define TIM_IT_CC4 TIM_DIER_CC4IE /*!< Capture/Compare 4 interrupt */ -#define TIM_IT_COM TIM_DIER_COMIE /*!< Commutation interrupt */ -#define TIM_IT_TRIGGER TIM_DIER_TIE /*!< Trigger interrupt */ -#define TIM_IT_BREAK TIM_DIER_BIE /*!< Break interrupt */ -/** - * @} - */ - -/** @defgroup TIM_Commutation_Source TIM Commutation Source - * @{ - */ -#define TIM_COMMUTATION_TRGI TIM_CR2_CCUS /*!< When Capture/compare control bits are preloaded, they are updated by setting the COMG bit or when an rising edge occurs on trigger input */ -#define TIM_COMMUTATION_SOFTWARE 0x00000000U /*!< When Capture/compare control bits are preloaded, they are updated by setting the COMG bit */ -/** - * @} - */ - -/** @defgroup TIM_DMA_sources TIM DMA Sources - * @{ - */ -#define TIM_DMA_UPDATE TIM_DIER_UDE /*!< DMA request is triggered by the update event */ -#define TIM_DMA_CC1 TIM_DIER_CC1DE /*!< DMA request is triggered by the capture/compare macth 1 event */ -#define TIM_DMA_CC2 TIM_DIER_CC2DE /*!< DMA request is triggered by the capture/compare macth 2 event event */ -#define TIM_DMA_CC3 TIM_DIER_CC3DE /*!< DMA request is triggered by the capture/compare macth 3 event event */ -#define TIM_DMA_CC4 TIM_DIER_CC4DE /*!< DMA request is triggered by the capture/compare macth 4 event event */ -#define TIM_DMA_COM TIM_DIER_COMDE /*!< DMA request is triggered by the commutation event */ -#define TIM_DMA_TRIGGER TIM_DIER_TDE /*!< DMA request is triggered by the trigger event */ -/** - * @} - */ - -/** @defgroup TIM_Flag_definition TIM Flag Definition - * @{ - */ -#define TIM_FLAG_UPDATE TIM_SR_UIF /*!< Update interrupt flag */ -#define TIM_FLAG_CC1 TIM_SR_CC1IF /*!< Capture/Compare 1 interrupt flag */ -#define TIM_FLAG_CC2 TIM_SR_CC2IF /*!< Capture/Compare 2 interrupt flag */ -#define TIM_FLAG_CC3 TIM_SR_CC3IF /*!< Capture/Compare 3 interrupt flag */ -#define TIM_FLAG_CC4 TIM_SR_CC4IF /*!< Capture/Compare 4 interrupt flag */ -#define TIM_FLAG_CC5 TIM_SR_CC5IF /*!< Capture/Compare 5 interrupt flag */ -#define TIM_FLAG_CC6 TIM_SR_CC6IF /*!< Capture/Compare 6 interrupt flag */ -#define TIM_FLAG_COM TIM_SR_COMIF /*!< Commutation interrupt flag */ -#define TIM_FLAG_TRIGGER TIM_SR_TIF /*!< Trigger interrupt flag */ -#define TIM_FLAG_BREAK TIM_SR_BIF /*!< Break interrupt flag */ -#define TIM_FLAG_BREAK2 TIM_SR_B2IF /*!< Break 2 interrupt flag */ -#define TIM_FLAG_SYSTEM_BREAK TIM_SR_SBIF /*!< System Break interrupt flag */ -#define TIM_FLAG_CC1OF TIM_SR_CC1OF /*!< Capture 1 overcapture flag */ -#define TIM_FLAG_CC2OF TIM_SR_CC2OF /*!< Capture 2 overcapture flag */ -#define TIM_FLAG_CC3OF TIM_SR_CC3OF /*!< Capture 3 overcapture flag */ -#define TIM_FLAG_CC4OF TIM_SR_CC4OF /*!< Capture 4 overcapture flag */ -/** - * @} - */ - -/** @defgroup TIM_Channel TIM Channel - * @{ - */ -#define TIM_CHANNEL_1 0x00000000U /*!< Capture/compare channel 1 identifier */ -#define TIM_CHANNEL_2 0x00000004U /*!< Capture/compare channel 2 identifier */ -#define TIM_CHANNEL_3 0x00000008U /*!< Capture/compare channel 3 identifier */ -#define TIM_CHANNEL_4 0x0000000CU /*!< Capture/compare channel 4 identifier */ -#define TIM_CHANNEL_5 0x00000010U /*!< Compare channel 5 identifier */ -#define TIM_CHANNEL_6 0x00000014U /*!< Compare channel 6 identifier */ -#define TIM_CHANNEL_ALL 0x0000003CU /*!< Global Capture/compare channel identifier */ -/** - * @} - */ - -/** @defgroup TIM_Clock_Source TIM Clock Source - * @{ - */ -#define TIM_CLOCKSOURCE_ETRMODE2 TIM_SMCR_ETPS_1 /*!< External clock source mode 2 */ -#define TIM_CLOCKSOURCE_INTERNAL TIM_SMCR_ETPS_0 /*!< Internal clock source */ -#define TIM_CLOCKSOURCE_ITR0 TIM_TS_ITR0 /*!< External clock source mode 1 (ITR0) */ -#define TIM_CLOCKSOURCE_ITR1 TIM_TS_ITR1 /*!< External clock source mode 1 (ITR1) */ -#define TIM_CLOCKSOURCE_ITR2 TIM_TS_ITR2 /*!< External clock source mode 1 (ITR2) */ -#define TIM_CLOCKSOURCE_ITR3 TIM_TS_ITR3 /*!< External clock source mode 1 (ITR3) */ -#define TIM_CLOCKSOURCE_TI1ED TIM_TS_TI1F_ED /*!< External clock source mode 1 (TTI1FP1 + edge detect.) */ -#define TIM_CLOCKSOURCE_TI1 TIM_TS_TI1FP1 /*!< External clock source mode 1 (TTI1FP1) */ -#define TIM_CLOCKSOURCE_TI2 TIM_TS_TI2FP2 /*!< External clock source mode 1 (TTI2FP2) */ -#define TIM_CLOCKSOURCE_ETRMODE1 TIM_TS_ETRF /*!< External clock source mode 1 (ETRF) */ -/** - * @} - */ - -/** @defgroup TIM_Clock_Polarity TIM Clock Polarity - * @{ - */ -#define TIM_CLOCKPOLARITY_INVERTED TIM_ETRPOLARITY_INVERTED /*!< Polarity for ETRx clock sources */ -#define TIM_CLOCKPOLARITY_NONINVERTED TIM_ETRPOLARITY_NONINVERTED /*!< Polarity for ETRx clock sources */ -#define TIM_CLOCKPOLARITY_RISING TIM_INPUTCHANNELPOLARITY_RISING /*!< Polarity for TIx clock sources */ -#define TIM_CLOCKPOLARITY_FALLING TIM_INPUTCHANNELPOLARITY_FALLING /*!< Polarity for TIx clock sources */ -#define TIM_CLOCKPOLARITY_BOTHEDGE TIM_INPUTCHANNELPOLARITY_BOTHEDGE /*!< Polarity for TIx clock sources */ -/** - * @} - */ - -/** @defgroup TIM_Clock_Prescaler TIM Clock Prescaler - * @{ - */ -#define TIM_CLOCKPRESCALER_DIV1 TIM_ETRPRESCALER_DIV1 /*!< No prescaler is used */ -#define TIM_CLOCKPRESCALER_DIV2 TIM_ETRPRESCALER_DIV2 /*!< Prescaler for External ETR Clock: Capture performed once every 2 events. */ -#define TIM_CLOCKPRESCALER_DIV4 TIM_ETRPRESCALER_DIV4 /*!< Prescaler for External ETR Clock: Capture performed once every 4 events. */ -#define TIM_CLOCKPRESCALER_DIV8 TIM_ETRPRESCALER_DIV8 /*!< Prescaler for External ETR Clock: Capture performed once every 8 events. */ -/** - * @} - */ - -/** @defgroup TIM_ClearInput_Polarity TIM Clear Input Polarity - * @{ - */ -#define TIM_CLEARINPUTPOLARITY_INVERTED TIM_ETRPOLARITY_INVERTED /*!< Polarity for ETRx pin */ -#define TIM_CLEARINPUTPOLARITY_NONINVERTED TIM_ETRPOLARITY_NONINVERTED /*!< Polarity for ETRx pin */ -/** - * @} - */ - -/** @defgroup TIM_ClearInput_Prescaler TIM Clear Input Prescaler - * @{ - */ -#define TIM_CLEARINPUTPRESCALER_DIV1 TIM_ETRPRESCALER_DIV1 /*!< No prescaler is used */ -#define TIM_CLEARINPUTPRESCALER_DIV2 TIM_ETRPRESCALER_DIV2 /*!< Prescaler for External ETR pin: Capture performed once every 2 events. */ -#define TIM_CLEARINPUTPRESCALER_DIV4 TIM_ETRPRESCALER_DIV4 /*!< Prescaler for External ETR pin: Capture performed once every 4 events. */ -#define TIM_CLEARINPUTPRESCALER_DIV8 TIM_ETRPRESCALER_DIV8 /*!< Prescaler for External ETR pin: Capture performed once every 8 events. */ -/** - * @} - */ - -/** @defgroup TIM_OSSR_Off_State_Selection_for_Run_mode_state TIM OSSR OffState Selection for Run mode state - * @{ - */ -#define TIM_OSSR_ENABLE TIM_BDTR_OSSR /*!< When inactive, OC/OCN outputs are enabled (still controlled by the timer) */ -#define TIM_OSSR_DISABLE 0x00000000U /*!< When inactive, OC/OCN outputs are disabled (not controlled any longer by the timer) */ -/** - * @} - */ - -/** @defgroup TIM_OSSI_Off_State_Selection_for_Idle_mode_state TIM OSSI OffState Selection for Idle mode state - * @{ - */ -#define TIM_OSSI_ENABLE TIM_BDTR_OSSI /*!< When inactive, OC/OCN outputs are enabled (still controlled by the timer) */ -#define TIM_OSSI_DISABLE 0x00000000U /*!< When inactive, OC/OCN outputs are disabled (not controlled any longer by the timer) */ -/** - * @} - */ -/** @defgroup TIM_Lock_level TIM Lock level - * @{ - */ -#define TIM_LOCKLEVEL_OFF 0x00000000U /*!< LOCK OFF */ -#define TIM_LOCKLEVEL_1 TIM_BDTR_LOCK_0 /*!< LOCK Level 1 */ -#define TIM_LOCKLEVEL_2 TIM_BDTR_LOCK_1 /*!< LOCK Level 2 */ -#define TIM_LOCKLEVEL_3 TIM_BDTR_LOCK /*!< LOCK Level 3 */ -/** - * @} - */ - -/** @defgroup TIM_Break_Input_enable_disable TIM Break Input Enable - * @{ - */ -#define TIM_BREAK_ENABLE TIM_BDTR_BKE /*!< Break input BRK is enabled */ -#define TIM_BREAK_DISABLE 0x00000000U /*!< Break input BRK is disabled */ -/** - * @} - */ - -/** @defgroup TIM_Break_Polarity TIM Break Input Polarity - * @{ - */ -#define TIM_BREAKPOLARITY_LOW 0x00000000U /*!< Break input BRK is active low */ -#define TIM_BREAKPOLARITY_HIGH TIM_BDTR_BKP /*!< Break input BRK is active high */ -/** - * @} - */ - -/** @defgroup TIM_Break2_Input_enable_disable TIM Break input 2 Enable - * @{ - */ -#define TIM_BREAK2_DISABLE 0x00000000U /*!< Break input BRK2 is disabled */ -#define TIM_BREAK2_ENABLE TIM_BDTR_BK2E /*!< Break input BRK2 is enabled */ -/** - * @} - */ - -/** @defgroup TIM_Break2_Polarity TIM Break Input 2 Polarity - * @{ - */ -#define TIM_BREAK2POLARITY_LOW 0x00000000U /*!< Break input BRK2 is active low */ -#define TIM_BREAK2POLARITY_HIGH TIM_BDTR_BK2P /*!< Break input BRK2 is active high */ -/** - * @} - */ - -/** @defgroup TIM_AOE_Bit_Set_Reset TIM Automatic Output Enable - * @{ - */ -#define TIM_AUTOMATICOUTPUT_DISABLE 0x00000000U /*!< MOE can be set only by software */ -#define TIM_AUTOMATICOUTPUT_ENABLE TIM_BDTR_AOE /*!< MOE can be set by software or automatically at the next update event - (if none of the break inputs BRK and BRK2 is active) */ -/** - * @} - */ - -/** @defgroup TIM_Group_Channel5 Group Channel 5 and Channel 1, 2 or 3 - * @{ - */ -#define TIM_GROUPCH5_NONE 0x00000000U /* !< No effect of OC5REF on OC1REFC, OC2REFC and OC3REFC */ -#define TIM_GROUPCH5_OC1REFC TIM_CCR5_GC5C1 /* !< OC1REFC is the logical AND of OC1REFC and OC5REF */ -#define TIM_GROUPCH5_OC2REFC TIM_CCR5_GC5C2 /* !< OC2REFC is the logical AND of OC2REFC and OC5REF */ -#define TIM_GROUPCH5_OC3REFC TIM_CCR5_GC5C3 /* !< OC3REFC is the logical AND of OC3REFC and OC5REF */ -/** - * @} - */ - -/** @defgroup TIM_Master_Mode_Selection TIM Master Mode Selection - * @{ - */ -#define TIM_TRGO_RESET 0x00000000U /*!< TIMx_EGR.UG bit is used as trigger output (TRGO) */ -#define TIM_TRGO_ENABLE TIM_CR2_MMS_0 /*!< TIMx_CR1.CEN bit is used as trigger output (TRGO) */ -#define TIM_TRGO_UPDATE TIM_CR2_MMS_1 /*!< Update event is used as trigger output (TRGO) */ -#define TIM_TRGO_OC1 (TIM_CR2_MMS_1 | TIM_CR2_MMS_0) /*!< Capture or a compare match 1 is used as trigger output (TRGO) */ -#define TIM_TRGO_OC1REF TIM_CR2_MMS_2 /*!< OC1REF signal is used as trigger output (TRGO) */ -#define TIM_TRGO_OC2REF (TIM_CR2_MMS_2 | TIM_CR2_MMS_0) /*!< OC2REF signal is used as trigger output(TRGO) */ -#define TIM_TRGO_OC3REF (TIM_CR2_MMS_2 | TIM_CR2_MMS_1) /*!< OC3REF signal is used as trigger output(TRGO) */ -#define TIM_TRGO_OC4REF (TIM_CR2_MMS_2 | TIM_CR2_MMS_1 | TIM_CR2_MMS_0) /*!< OC4REF signal is used as trigger output(TRGO) */ -/** - * @} - */ - -/** @defgroup TIM_Master_Mode_Selection_2 TIM Master Mode Selection 2 (TRGO2) - * @{ - */ -#define TIM_TRGO2_RESET 0x00000000U /*!< TIMx_EGR.UG bit is used as trigger output (TRGO2) */ -#define TIM_TRGO2_ENABLE TIM_CR2_MMS2_0 /*!< TIMx_CR1.CEN bit is used as trigger output (TRGO2) */ -#define TIM_TRGO2_UPDATE TIM_CR2_MMS2_1 /*!< Update event is used as trigger output (TRGO2) */ -#define TIM_TRGO2_OC1 (TIM_CR2_MMS2_1 | TIM_CR2_MMS2_0) /*!< Capture or a compare match 1 is used as trigger output (TRGO2) */ -#define TIM_TRGO2_OC1REF TIM_CR2_MMS2_2 /*!< OC1REF signal is used as trigger output (TRGO2) */ -#define TIM_TRGO2_OC2REF (TIM_CR2_MMS2_2 | TIM_CR2_MMS2_0) /*!< OC2REF signal is used as trigger output (TRGO2) */ -#define TIM_TRGO2_OC3REF (TIM_CR2_MMS2_2 | TIM_CR2_MMS2_1) /*!< OC3REF signal is used as trigger output (TRGO2) */ -#define TIM_TRGO2_OC4REF (TIM_CR2_MMS2_2 | TIM_CR2_MMS2_1 | TIM_CR2_MMS2_0) /*!< OC4REF signal is used as trigger output (TRGO2) */ -#define TIM_TRGO2_OC5REF TIM_CR2_MMS2_3 /*!< OC5REF signal is used as trigger output (TRGO2) */ -#define TIM_TRGO2_OC6REF (TIM_CR2_MMS2_3 | TIM_CR2_MMS2_0) /*!< OC6REF signal is used as trigger output (TRGO2) */ -#define TIM_TRGO2_OC4REF_RISINGFALLING (TIM_CR2_MMS2_3 | TIM_CR2_MMS2_1) /*!< OC4REF rising or falling edges generate pulses on TRGO2 */ -#define TIM_TRGO2_OC6REF_RISINGFALLING (TIM_CR2_MMS2_3 | TIM_CR2_MMS2_1 | TIM_CR2_MMS2_0) /*!< OC6REF rising or falling edges generate pulses on TRGO2 */ -#define TIM_TRGO2_OC4REF_RISING_OC6REF_RISING (TIM_CR2_MMS2_3 | TIM_CR2_MMS2_2) /*!< OC4REF or OC6REF rising edges generate pulses on TRGO2 */ -#define TIM_TRGO2_OC4REF_RISING_OC6REF_FALLING (TIM_CR2_MMS2_3 | TIM_CR2_MMS2_2 | TIM_CR2_MMS2_0) /*!< OC4REF rising or OC6REF falling edges generate pulses on TRGO2 */ -#define TIM_TRGO2_OC5REF_RISING_OC6REF_RISING (TIM_CR2_MMS2_3 | TIM_CR2_MMS2_2 |TIM_CR2_MMS2_1) /*!< OC5REF or OC6REF rising edges generate pulses on TRGO2 */ -#define TIM_TRGO2_OC5REF_RISING_OC6REF_FALLING (TIM_CR2_MMS2_3 | TIM_CR2_MMS2_2 | TIM_CR2_MMS2_1 | TIM_CR2_MMS2_0) /*!< OC5REF or OC6REF rising edges generate pulses on TRGO2 */ -/** - * @} - */ - -/** @defgroup TIM_Master_Slave_Mode TIM Master/Slave Mode - * @{ - */ -#define TIM_MASTERSLAVEMODE_ENABLE TIM_SMCR_MSM /*!< No action */ -#define TIM_MASTERSLAVEMODE_DISABLE 0x00000000U /*!< Master/slave mode is selected */ -/** - * @} - */ - -/** @defgroup TIM_Slave_Mode TIM Slave mode - * @{ - */ -#define TIM_SLAVEMODE_DISABLE 0x00000000U /*!< Slave mode disabled */ -#define TIM_SLAVEMODE_RESET TIM_SMCR_SMS_2 /*!< Reset Mode */ -#define TIM_SLAVEMODE_GATED (TIM_SMCR_SMS_2 | TIM_SMCR_SMS_0) /*!< Gated Mode */ -#define TIM_SLAVEMODE_TRIGGER (TIM_SMCR_SMS_2 | TIM_SMCR_SMS_1) /*!< Trigger Mode */ -#define TIM_SLAVEMODE_EXTERNAL1 (TIM_SMCR_SMS_2 | TIM_SMCR_SMS_1 | TIM_SMCR_SMS_0) /*!< External Clock Mode 1 */ -#define TIM_SLAVEMODE_COMBINED_RESETTRIGGER TIM_SMCR_SMS_3 /*!< Combined reset + trigger mode */ -/** - * @} - */ - -/** @defgroup TIM_Output_Compare_and_PWM_modes TIM Output Compare and PWM Modes - * @{ - */ -#define TIM_OCMODE_TIMING 0x00000000U /*!< Frozen */ -#define TIM_OCMODE_ACTIVE TIM_CCMR1_OC1M_0 /*!< Set channel to active level on match */ -#define TIM_OCMODE_INACTIVE TIM_CCMR1_OC1M_1 /*!< Set channel to inactive level on match */ -#define TIM_OCMODE_TOGGLE (TIM_CCMR1_OC1M_1 | TIM_CCMR1_OC1M_0) /*!< Toggle */ -#define TIM_OCMODE_PWM1 (TIM_CCMR1_OC1M_2 | TIM_CCMR1_OC1M_1) /*!< PWM mode 1 */ -#define TIM_OCMODE_PWM2 (TIM_CCMR1_OC1M_2 | TIM_CCMR1_OC1M_1 | TIM_CCMR1_OC1M_0) /*!< PWM mode 2 */ -#define TIM_OCMODE_FORCED_ACTIVE (TIM_CCMR1_OC1M_2 | TIM_CCMR1_OC1M_0) /*!< Force active level */ -#define TIM_OCMODE_FORCED_INACTIVE TIM_CCMR1_OC1M_2 /*!< Force inactive level */ -#define TIM_OCMODE_RETRIGERRABLE_OPM1 TIM_CCMR1_OC1M_3 /*!< Retrigerrable OPM mode 1 */ -#define TIM_OCMODE_RETRIGERRABLE_OPM2 (TIM_CCMR1_OC1M_3 | TIM_CCMR1_OC1M_0) /*!< Retrigerrable OPM mode 2 */ -#define TIM_OCMODE_COMBINED_PWM1 (TIM_CCMR1_OC1M_3 | TIM_CCMR1_OC1M_2) /*!< Combined PWM mode 1 */ -#define TIM_OCMODE_COMBINED_PWM2 (TIM_CCMR1_OC1M_3 | TIM_CCMR1_OC1M_0 | TIM_CCMR1_OC1M_2) /*!< Combined PWM mode 2 */ -#define TIM_OCMODE_ASSYMETRIC_PWM1 (TIM_CCMR1_OC1M_3 | TIM_CCMR1_OC1M_1 | TIM_CCMR1_OC1M_2) /*!< Asymmetric PWM mode 1 */ -#define TIM_OCMODE_ASSYMETRIC_PWM2 TIM_CCMR1_OC1M /*!< Asymmetric PWM mode 2 */ -/** - * @} - */ - -/** @defgroup TIM_Trigger_Selection TIM Trigger Selection - * @{ - */ -#define TIM_TS_ITR0 0x00000000U /*!< Internal Trigger 0 (ITR0) */ -#define TIM_TS_ITR1 TIM_SMCR_TS_0 /*!< Internal Trigger 1 (ITR1) */ -#define TIM_TS_ITR2 TIM_SMCR_TS_1 /*!< Internal Trigger 2 (ITR2) */ -#define TIM_TS_ITR3 (TIM_SMCR_TS_0 | TIM_SMCR_TS_1) /*!< Internal Trigger 3 (ITR3) */ -#define TIM_TS_TI1F_ED TIM_SMCR_TS_2 /*!< TI1 Edge Detector (TI1F_ED) */ -#define TIM_TS_TI1FP1 (TIM_SMCR_TS_0 | TIM_SMCR_TS_2) /*!< Filtered Timer Input 1 (TI1FP1) */ -#define TIM_TS_TI2FP2 (TIM_SMCR_TS_1 | TIM_SMCR_TS_2) /*!< Filtered Timer Input 2 (TI2FP2) */ -#define TIM_TS_ETRF (TIM_SMCR_TS_0 | TIM_SMCR_TS_1 | TIM_SMCR_TS_2) /*!< Filtered External Trigger input (ETRF) */ -#define TIM_TS_NONE 0x0000FFFFU /*!< No trigger selected */ -/** - * @} - */ - -/** @defgroup TIM_Trigger_Polarity TIM Trigger Polarity - * @{ - */ -#define TIM_TRIGGERPOLARITY_INVERTED TIM_ETRPOLARITY_INVERTED /*!< Polarity for ETRx trigger sources */ -#define TIM_TRIGGERPOLARITY_NONINVERTED TIM_ETRPOLARITY_NONINVERTED /*!< Polarity for ETRx trigger sources */ -#define TIM_TRIGGERPOLARITY_RISING TIM_INPUTCHANNELPOLARITY_RISING /*!< Polarity for TIxFPx or TI1_ED trigger sources */ -#define TIM_TRIGGERPOLARITY_FALLING TIM_INPUTCHANNELPOLARITY_FALLING /*!< Polarity for TIxFPx or TI1_ED trigger sources */ -#define TIM_TRIGGERPOLARITY_BOTHEDGE TIM_INPUTCHANNELPOLARITY_BOTHEDGE /*!< Polarity for TIxFPx or TI1_ED trigger sources */ -/** - * @} - */ - -/** @defgroup TIM_Trigger_Prescaler TIM Trigger Prescaler - * @{ - */ -#define TIM_TRIGGERPRESCALER_DIV1 TIM_ETRPRESCALER_DIV1 /*!< No prescaler is used */ -#define TIM_TRIGGERPRESCALER_DIV2 TIM_ETRPRESCALER_DIV2 /*!< Prescaler for External ETR Trigger: Capture performed once every 2 events. */ -#define TIM_TRIGGERPRESCALER_DIV4 TIM_ETRPRESCALER_DIV4 /*!< Prescaler for External ETR Trigger: Capture performed once every 4 events. */ -#define TIM_TRIGGERPRESCALER_DIV8 TIM_ETRPRESCALER_DIV8 /*!< Prescaler for External ETR Trigger: Capture performed once every 8 events. */ -/** - * @} - */ - -/** @defgroup TIM_TI1_Selection TIM TI1 Input Selection - * @{ - */ -#define TIM_TI1SELECTION_CH1 0x00000000U /*!< The TIMx_CH1 pin is connected to TI1 input */ -#define TIM_TI1SELECTION_XORCOMBINATION TIM_CR2_TI1S /*!< The TIMx_CH1, CH2 and CH3 pins are connected to the TI1 input (XOR combination) */ -/** - * @} - */ - -/** @defgroup TIM_DMA_Burst_Length TIM DMA Burst Length - * @{ - */ -#define TIM_DMABURSTLENGTH_1TRANSFER 0x00000000U /*!< The transfer is done to 1 register starting trom TIMx_CR1 + TIMx_DCR.DBA */ -#define TIM_DMABURSTLENGTH_2TRANSFERS 0x00000100U /*!< The transfer is done to 2 registers starting trom TIMx_CR1 + TIMx_DCR.DBA */ -#define TIM_DMABURSTLENGTH_3TRANSFERS 0x00000200U /*!< The transfer is done to 3 registers starting trom TIMx_CR1 + TIMx_DCR.DBA */ -#define TIM_DMABURSTLENGTH_4TRANSFERS 0x00000300U /*!< The transfer is done to 4 registers starting trom TIMx_CR1 + TIMx_DCR.DBA */ -#define TIM_DMABURSTLENGTH_5TRANSFERS 0x00000400U /*!< The transfer is done to 5 registers starting trom TIMx_CR1 + TIMx_DCR.DBA */ -#define TIM_DMABURSTLENGTH_6TRANSFERS 0x00000500U /*!< The transfer is done to 6 registers starting trom TIMx_CR1 + TIMx_DCR.DBA */ -#define TIM_DMABURSTLENGTH_7TRANSFERS 0x00000600U /*!< The transfer is done to 7 registers starting trom TIMx_CR1 + TIMx_DCR.DBA */ -#define TIM_DMABURSTLENGTH_8TRANSFERS 0x00000700U /*!< The transfer is done to 8 registers starting trom TIMx_CR1 + TIMx_DCR.DBA */ -#define TIM_DMABURSTLENGTH_9TRANSFERS 0x00000800U /*!< The transfer is done to 9 registers starting trom TIMx_CR1 + TIMx_DCR.DBA */ -#define TIM_DMABURSTLENGTH_10TRANSFERS 0x00000900U /*!< The transfer is done to 10 registers starting trom TIMx_CR1 + TIMx_DCR.DBA */ -#define TIM_DMABURSTLENGTH_11TRANSFERS 0x00000A00U /*!< The transfer is done to 11 registers starting trom TIMx_CR1 + TIMx_DCR.DBA */ -#define TIM_DMABURSTLENGTH_12TRANSFERS 0x00000B00U /*!< The transfer is done to 12 registers starting trom TIMx_CR1 + TIMx_DCR.DBA */ -#define TIM_DMABURSTLENGTH_13TRANSFERS 0x00000C00U /*!< The transfer is done to 13 registers starting trom TIMx_CR1 + TIMx_DCR.DBA */ -#define TIM_DMABURSTLENGTH_14TRANSFERS 0x00000D00U /*!< The transfer is done to 14 registers starting trom TIMx_CR1 + TIMx_DCR.DBA */ -#define TIM_DMABURSTLENGTH_15TRANSFERS 0x00000E00U /*!< The transfer is done to 15 registers starting trom TIMx_CR1 + TIMx_DCR.DBA */ -#define TIM_DMABURSTLENGTH_16TRANSFERS 0x00000F00U /*!< The transfer is done to 16 registers starting trom TIMx_CR1 + TIMx_DCR.DBA */ -#define TIM_DMABURSTLENGTH_17TRANSFERS 0x00001000U /*!< The transfer is done to 17 registers starting trom TIMx_CR1 + TIMx_DCR.DBA */ -#define TIM_DMABURSTLENGTH_18TRANSFERS 0x00001100U /*!< The transfer is done to 18 registers starting trom TIMx_CR1 + TIMx_DCR.DBA */ -/** - * @} - */ - -/** @defgroup DMA_Handle_index TIM DMA Handle Index - * @{ - */ -#define TIM_DMA_ID_UPDATE ((uint16_t) 0x0000) /*!< Index of the DMA handle used for Update DMA requests */ -#define TIM_DMA_ID_CC1 ((uint16_t) 0x0001) /*!< Index of the DMA handle used for Capture/Compare 1 DMA requests */ -#define TIM_DMA_ID_CC2 ((uint16_t) 0x0002) /*!< Index of the DMA handle used for Capture/Compare 2 DMA requests */ -#define TIM_DMA_ID_CC3 ((uint16_t) 0x0003) /*!< Index of the DMA handle used for Capture/Compare 3 DMA requests */ -#define TIM_DMA_ID_CC4 ((uint16_t) 0x0004) /*!< Index of the DMA handle used for Capture/Compare 4 DMA requests */ -#define TIM_DMA_ID_COMMUTATION ((uint16_t) 0x0005) /*!< Index of the DMA handle used for Commutation DMA requests */ -#define TIM_DMA_ID_TRIGGER ((uint16_t) 0x0006) /*!< Index of the DMA handle used for Trigger DMA requests */ -/** - * @} - */ - -/** @defgroup Channel_CC_State TIM Capture/Compare Channel State - * @{ - */ -#define TIM_CCx_ENABLE 0x00000001U /*!< Input or output channel is enabled */ -#define TIM_CCx_DISABLE 0x00000000U /*!< Input or output channel is disabled */ -#define TIM_CCxN_ENABLE 0x00000004U /*!< Complementary output channel is enabled */ -#define TIM_CCxN_DISABLE 0x00000000U /*!< Complementary output channel is enabled */ -/** - * @} - */ - -/** @defgroup TIM_Break_System TIM Break System - * @{ - */ -#define TIM_BREAK_SYSTEM_ECC SYSCFG_CFGR2_ECCL /*!< Enables and locks the ECC error signal with Break Input of TIM1/8/15/16/17 */ -#define TIM_BREAK_SYSTEM_PVD SYSCFG_CFGR2_PVDL /*!< Enables and locks the PVD connection with TIM1/8/15/16/17 Break Input and also the PVDE and PLS bits of the Power Control Interface */ -#define TIM_BREAK_SYSTEM_SRAM_PARITY_ERROR SYSCFG_CFGR2_SPL /*!< Enables and locks the SRAM_PARITY error signal with Break Input of TIM1/8/15/16/17 */ -#define TIM_BREAK_SYSTEM_LOCKUP SYSCFG_CFGR2_CLL /*!< Enables and locks the LOCKUP output of CortexM4 with Break Input of TIM1/8/15/16/17 */ -/** - * @} - */ - -/** - * @} - */ -/* End of exported constants -------------------------------------------------*/ - -/* Exported macros -----------------------------------------------------------*/ -/** @defgroup TIM_Exported_Macros TIM Exported Macros - * @{ - */ - -/** @brief Reset TIM handle state. - * @param __HANDLE__ TIM handle. - * @retval None - */ -#if (USE_HAL_TIM_REGISTER_CALLBACKS == 1) -#define __HAL_TIM_RESET_HANDLE_STATE(__HANDLE__) do { \ - (__HANDLE__)->State = HAL_TIM_STATE_RESET; \ - (__HANDLE__)->Base_MspInitCallback = NULL; \ - (__HANDLE__)->Base_MspDeInitCallback = NULL; \ - (__HANDLE__)->IC_MspInitCallback = NULL; \ - (__HANDLE__)->IC_MspDeInitCallback = NULL; \ - (__HANDLE__)->OC_MspInitCallback = NULL; \ - (__HANDLE__)->OC_MspDeInitCallback = NULL; \ - (__HANDLE__)->PWM_MspInitCallback = NULL; \ - (__HANDLE__)->PWM_MspDeInitCallback = NULL; \ - (__HANDLE__)->OnePulse_MspInitCallback = NULL; \ - (__HANDLE__)->OnePulse_MspDeInitCallback = NULL; \ - (__HANDLE__)->Encoder_MspInitCallback = NULL; \ - (__HANDLE__)->Encoder_MspDeInitCallback = NULL; \ - (__HANDLE__)->HallSensor_MspInitCallback = NULL; \ - (__HANDLE__)->HallSensor_MspDeInitCallback = NULL; \ - } while(0) -#else -#define __HAL_TIM_RESET_HANDLE_STATE(__HANDLE__) ((__HANDLE__)->State = HAL_TIM_STATE_RESET) -#endif /* USE_HAL_TIM_REGISTER_CALLBACKS */ - -/** - * @brief Enable the TIM peripheral. - * @param __HANDLE__ TIM handle - * @retval None - */ -#define __HAL_TIM_ENABLE(__HANDLE__) ((__HANDLE__)->Instance->CR1|=(TIM_CR1_CEN)) - -/** - * @brief Enable the TIM main Output. - * @param __HANDLE__ TIM handle - * @retval None - */ -#define __HAL_TIM_MOE_ENABLE(__HANDLE__) ((__HANDLE__)->Instance->BDTR|=(TIM_BDTR_MOE)) - -/** - * @brief Disable the TIM peripheral. - * @param __HANDLE__ TIM handle - * @retval None - */ -#define __HAL_TIM_DISABLE(__HANDLE__) \ - do { \ - if (((__HANDLE__)->Instance->CCER & TIM_CCER_CCxE_MASK) == 0UL) \ - { \ - if(((__HANDLE__)->Instance->CCER & TIM_CCER_CCxNE_MASK) == 0UL) \ - { \ - (__HANDLE__)->Instance->CR1 &= ~(TIM_CR1_CEN); \ - } \ - } \ - } while(0) - -/** - * @brief Disable the TIM main Output. - * @param __HANDLE__ TIM handle - * @retval None - * @note The Main Output Enable of a timer instance is disabled only if all the CCx and CCxN channels have been disabled - */ -#define __HAL_TIM_MOE_DISABLE(__HANDLE__) \ - do { \ - if (((__HANDLE__)->Instance->CCER & TIM_CCER_CCxE_MASK) == 0UL) \ - { \ - if(((__HANDLE__)->Instance->CCER & TIM_CCER_CCxNE_MASK) == 0UL) \ - { \ - (__HANDLE__)->Instance->BDTR &= ~(TIM_BDTR_MOE); \ - } \ - } \ - } while(0) - -/** - * @brief Disable the TIM main Output. - * @param __HANDLE__ TIM handle - * @retval None - * @note The Main Output Enable of a timer instance is disabled unconditionally - */ -#define __HAL_TIM_MOE_DISABLE_UNCONDITIONALLY(__HANDLE__) (__HANDLE__)->Instance->BDTR &= ~(TIM_BDTR_MOE) - -/** @brief Enable the specified TIM interrupt. - * @param __HANDLE__ specifies the TIM Handle. - * @param __INTERRUPT__ specifies the TIM interrupt source to enable. - * This parameter can be one of the following values: - * @arg TIM_IT_UPDATE: Update interrupt - * @arg TIM_IT_CC1: Capture/Compare 1 interrupt - * @arg TIM_IT_CC2: Capture/Compare 2 interrupt - * @arg TIM_IT_CC3: Capture/Compare 3 interrupt - * @arg TIM_IT_CC4: Capture/Compare 4 interrupt - * @arg TIM_IT_COM: Commutation interrupt - * @arg TIM_IT_TRIGGER: Trigger interrupt - * @arg TIM_IT_BREAK: Break interrupt - * @retval None - */ -#define __HAL_TIM_ENABLE_IT(__HANDLE__, __INTERRUPT__) ((__HANDLE__)->Instance->DIER |= (__INTERRUPT__)) - -/** @brief Disable the specified TIM interrupt. - * @param __HANDLE__ specifies the TIM Handle. - * @param __INTERRUPT__ specifies the TIM interrupt source to disable. - * This parameter can be one of the following values: - * @arg TIM_IT_UPDATE: Update interrupt - * @arg TIM_IT_CC1: Capture/Compare 1 interrupt - * @arg TIM_IT_CC2: Capture/Compare 2 interrupt - * @arg TIM_IT_CC3: Capture/Compare 3 interrupt - * @arg TIM_IT_CC4: Capture/Compare 4 interrupt - * @arg TIM_IT_COM: Commutation interrupt - * @arg TIM_IT_TRIGGER: Trigger interrupt - * @arg TIM_IT_BREAK: Break interrupt - * @retval None - */ -#define __HAL_TIM_DISABLE_IT(__HANDLE__, __INTERRUPT__) ((__HANDLE__)->Instance->DIER &= ~(__INTERRUPT__)) - -/** @brief Enable the specified DMA request. - * @param __HANDLE__ specifies the TIM Handle. - * @param __DMA__ specifies the TIM DMA request to enable. - * This parameter can be one of the following values: - * @arg TIM_DMA_UPDATE: Update DMA request - * @arg TIM_DMA_CC1: Capture/Compare 1 DMA request - * @arg TIM_DMA_CC2: Capture/Compare 2 DMA request - * @arg TIM_DMA_CC3: Capture/Compare 3 DMA request - * @arg TIM_DMA_CC4: Capture/Compare 4 DMA request - * @arg TIM_DMA_COM: Commutation DMA request - * @arg TIM_DMA_TRIGGER: Trigger DMA request - * @retval None - */ -#define __HAL_TIM_ENABLE_DMA(__HANDLE__, __DMA__) ((__HANDLE__)->Instance->DIER |= (__DMA__)) - -/** @brief Disable the specified DMA request. - * @param __HANDLE__ specifies the TIM Handle. - * @param __DMA__ specifies the TIM DMA request to disable. - * This parameter can be one of the following values: - * @arg TIM_DMA_UPDATE: Update DMA request - * @arg TIM_DMA_CC1: Capture/Compare 1 DMA request - * @arg TIM_DMA_CC2: Capture/Compare 2 DMA request - * @arg TIM_DMA_CC3: Capture/Compare 3 DMA request - * @arg TIM_DMA_CC4: Capture/Compare 4 DMA request - * @arg TIM_DMA_COM: Commutation DMA request - * @arg TIM_DMA_TRIGGER: Trigger DMA request - * @retval None - */ -#define __HAL_TIM_DISABLE_DMA(__HANDLE__, __DMA__) ((__HANDLE__)->Instance->DIER &= ~(__DMA__)) - -/** @brief Check whether the specified TIM interrupt flag is set or not. - * @param __HANDLE__ specifies the TIM Handle. - * @param __FLAG__ specifies the TIM interrupt flag to check. - * This parameter can be one of the following values: - * @arg TIM_FLAG_UPDATE: Update interrupt flag - * @arg TIM_FLAG_CC1: Capture/Compare 1 interrupt flag - * @arg TIM_FLAG_CC2: Capture/Compare 2 interrupt flag - * @arg TIM_FLAG_CC3: Capture/Compare 3 interrupt flag - * @arg TIM_FLAG_CC4: Capture/Compare 4 interrupt flag - * @arg TIM_FLAG_CC5: Compare 5 interrupt flag - * @arg TIM_FLAG_CC6: Compare 6 interrupt flag - * @arg TIM_FLAG_COM: Commutation interrupt flag - * @arg TIM_FLAG_TRIGGER: Trigger interrupt flag - * @arg TIM_FLAG_BREAK: Break interrupt flag - * @arg TIM_FLAG_BREAK2: Break 2 interrupt flag - * @arg TIM_FLAG_SYSTEM_BREAK: System Break interrupt flag - * @arg TIM_FLAG_CC1OF: Capture/Compare 1 overcapture flag - * @arg TIM_FLAG_CC2OF: Capture/Compare 2 overcapture flag - * @arg TIM_FLAG_CC3OF: Capture/Compare 3 overcapture flag - * @arg TIM_FLAG_CC4OF: Capture/Compare 4 overcapture flag - * @retval The new state of __FLAG__ (TRUE or FALSE). - */ -#define __HAL_TIM_GET_FLAG(__HANDLE__, __FLAG__) (((__HANDLE__)->Instance->SR &(__FLAG__)) == (__FLAG__)) - -/** @brief Clear the specified TIM interrupt flag. - * @param __HANDLE__ specifies the TIM Handle. - * @param __FLAG__ specifies the TIM interrupt flag to clear. - * This parameter can be one of the following values: - * @arg TIM_FLAG_UPDATE: Update interrupt flag - * @arg TIM_FLAG_CC1: Capture/Compare 1 interrupt flag - * @arg TIM_FLAG_CC2: Capture/Compare 2 interrupt flag - * @arg TIM_FLAG_CC3: Capture/Compare 3 interrupt flag - * @arg TIM_FLAG_CC4: Capture/Compare 4 interrupt flag - * @arg TIM_FLAG_CC5: Compare 5 interrupt flag - * @arg TIM_FLAG_CC6: Compare 6 interrupt flag - * @arg TIM_FLAG_COM: Commutation interrupt flag - * @arg TIM_FLAG_TRIGGER: Trigger interrupt flag - * @arg TIM_FLAG_BREAK: Break interrupt flag - * @arg TIM_FLAG_BREAK2: Break 2 interrupt flag - * @arg TIM_FLAG_SYSTEM_BREAK: System Break interrupt flag - * @arg TIM_FLAG_CC1OF: Capture/Compare 1 overcapture flag - * @arg TIM_FLAG_CC2OF: Capture/Compare 2 overcapture flag - * @arg TIM_FLAG_CC3OF: Capture/Compare 3 overcapture flag - * @arg TIM_FLAG_CC4OF: Capture/Compare 4 overcapture flag - * @retval The new state of __FLAG__ (TRUE or FALSE). - */ -#define __HAL_TIM_CLEAR_FLAG(__HANDLE__, __FLAG__) ((__HANDLE__)->Instance->SR = ~(__FLAG__)) - -/** - * @brief Check whether the specified TIM interrupt source is enabled or not. - * @param __HANDLE__ TIM handle - * @param __INTERRUPT__ specifies the TIM interrupt source to check. - * This parameter can be one of the following values: - * @arg TIM_IT_UPDATE: Update interrupt - * @arg TIM_IT_CC1: Capture/Compare 1 interrupt - * @arg TIM_IT_CC2: Capture/Compare 2 interrupt - * @arg TIM_IT_CC3: Capture/Compare 3 interrupt - * @arg TIM_IT_CC4: Capture/Compare 4 interrupt - * @arg TIM_IT_COM: Commutation interrupt - * @arg TIM_IT_TRIGGER: Trigger interrupt - * @arg TIM_IT_BREAK: Break interrupt - * @retval The state of TIM_IT (SET or RESET). - */ -#define __HAL_TIM_GET_IT_SOURCE(__HANDLE__, __INTERRUPT__) ((((__HANDLE__)->Instance->DIER & (__INTERRUPT__)) == (__INTERRUPT__)) ? SET : RESET) - -/** @brief Clear the TIM interrupt pending bits. - * @param __HANDLE__ TIM handle - * @param __INTERRUPT__ specifies the interrupt pending bit to clear. - * This parameter can be one of the following values: - * @arg TIM_IT_UPDATE: Update interrupt - * @arg TIM_IT_CC1: Capture/Compare 1 interrupt - * @arg TIM_IT_CC2: Capture/Compare 2 interrupt - * @arg TIM_IT_CC3: Capture/Compare 3 interrupt - * @arg TIM_IT_CC4: Capture/Compare 4 interrupt - * @arg TIM_IT_COM: Commutation interrupt - * @arg TIM_IT_TRIGGER: Trigger interrupt - * @arg TIM_IT_BREAK: Break interrupt - * @retval None - */ -#define __HAL_TIM_CLEAR_IT(__HANDLE__, __INTERRUPT__) ((__HANDLE__)->Instance->SR = ~(__INTERRUPT__)) - -/** - * @brief Indicates whether or not the TIM Counter is used as downcounter. - * @param __HANDLE__ TIM handle. - * @retval False (Counter used as upcounter) or True (Counter used as downcounter) - * @note This macro is particularly useful to get the counting mode when the timer operates in Center-aligned mode or Encoder -mode. - */ -#define __HAL_TIM_IS_TIM_COUNTING_DOWN(__HANDLE__) (((__HANDLE__)->Instance->CR1 &(TIM_CR1_DIR)) == (TIM_CR1_DIR)) - -/** - * @brief Set the TIM Prescaler on runtime. - * @param __HANDLE__ TIM handle. - * @param __PRESC__ specifies the Prescaler new value. - * @retval None - */ -#define __HAL_TIM_SET_PRESCALER(__HANDLE__, __PRESC__) ((__HANDLE__)->Instance->PSC = (__PRESC__)) - -/** - * @brief Set the TIM Counter Register value on runtime. - * @param __HANDLE__ TIM handle. - * @param __COUNTER__ specifies the Counter register new value. - * @retval None - */ -#define __HAL_TIM_SET_COUNTER(__HANDLE__, __COUNTER__) ((__HANDLE__)->Instance->CNT = (__COUNTER__)) - -/** - * @brief Get the TIM Counter Register value on runtime. - * @param __HANDLE__ TIM handle. - * @retval 16-bit or 32-bit value of the timer counter register (TIMx_CNT) - */ -#define __HAL_TIM_GET_COUNTER(__HANDLE__) \ - ((__HANDLE__)->Instance->CNT) - -/** - * @brief Set the TIM Autoreload Register value on runtime without calling another time any Init function. - * @param __HANDLE__ TIM handle. - * @param __AUTORELOAD__ specifies the Counter register new value. - * @retval None - */ -#define __HAL_TIM_SET_AUTORELOAD(__HANDLE__, __AUTORELOAD__) \ - do{ \ - (__HANDLE__)->Instance->ARR = (__AUTORELOAD__); \ - (__HANDLE__)->Init.Period = (__AUTORELOAD__); \ - } while(0) - -/** - * @brief Get the TIM Autoreload Register value on runtime. - * @param __HANDLE__ TIM handle. - * @retval 16-bit or 32-bit value of the timer auto-reload register(TIMx_ARR) - */ -#define __HAL_TIM_GET_AUTORELOAD(__HANDLE__) \ - ((__HANDLE__)->Instance->ARR) - -/** - * @brief Set the TIM Clock Division value on runtime without calling another time any Init function. - * @param __HANDLE__ TIM handle. - * @param __CKD__ specifies the clock division value. - * This parameter can be one of the following value: - * @arg TIM_CLOCKDIVISION_DIV1: tDTS=tCK_INT - * @arg TIM_CLOCKDIVISION_DIV2: tDTS=2*tCK_INT - * @arg TIM_CLOCKDIVISION_DIV4: tDTS=4*tCK_INT - * @retval None - */ -#define __HAL_TIM_SET_CLOCKDIVISION(__HANDLE__, __CKD__) \ - do{ \ - (__HANDLE__)->Instance->CR1 &= (~TIM_CR1_CKD); \ - (__HANDLE__)->Instance->CR1 |= (__CKD__); \ - (__HANDLE__)->Init.ClockDivision = (__CKD__); \ - } while(0) - -/** - * @brief Get the TIM Clock Division value on runtime. - * @param __HANDLE__ TIM handle. - * @retval The clock division can be one of the following values: - * @arg TIM_CLOCKDIVISION_DIV1: tDTS=tCK_INT - * @arg TIM_CLOCKDIVISION_DIV2: tDTS=2*tCK_INT - * @arg TIM_CLOCKDIVISION_DIV4: tDTS=4*tCK_INT - */ -#define __HAL_TIM_GET_CLOCKDIVISION(__HANDLE__) \ - ((__HANDLE__)->Instance->CR1 & TIM_CR1_CKD) - -/** - * @brief Set the TIM Input Capture prescaler on runtime without calling another time HAL_TIM_IC_ConfigChannel() function. - * @param __HANDLE__ TIM handle. - * @param __CHANNEL__ TIM Channels to be configured. - * This parameter can be one of the following values: - * @arg TIM_CHANNEL_1: TIM Channel 1 selected - * @arg TIM_CHANNEL_2: TIM Channel 2 selected - * @arg TIM_CHANNEL_3: TIM Channel 3 selected - * @arg TIM_CHANNEL_4: TIM Channel 4 selected - * @param __ICPSC__ specifies the Input Capture4 prescaler new value. - * This parameter can be one of the following values: - * @arg TIM_ICPSC_DIV1: no prescaler - * @arg TIM_ICPSC_DIV2: capture is done once every 2 events - * @arg TIM_ICPSC_DIV4: capture is done once every 4 events - * @arg TIM_ICPSC_DIV8: capture is done once every 8 events - * @retval None - */ -#define __HAL_TIM_SET_ICPRESCALER(__HANDLE__, __CHANNEL__, __ICPSC__) \ - do{ \ - TIM_RESET_ICPRESCALERVALUE((__HANDLE__), (__CHANNEL__)); \ - TIM_SET_ICPRESCALERVALUE((__HANDLE__), (__CHANNEL__), (__ICPSC__)); \ - } while(0) - -/** - * @brief Get the TIM Input Capture prescaler on runtime. - * @param __HANDLE__ TIM handle. - * @param __CHANNEL__ TIM Channels to be configured. - * This parameter can be one of the following values: - * @arg TIM_CHANNEL_1: get input capture 1 prescaler value - * @arg TIM_CHANNEL_2: get input capture 2 prescaler value - * @arg TIM_CHANNEL_3: get input capture 3 prescaler value - * @arg TIM_CHANNEL_4: get input capture 4 prescaler value - * @retval The input capture prescaler can be one of the following values: - * @arg TIM_ICPSC_DIV1: no prescaler - * @arg TIM_ICPSC_DIV2: capture is done once every 2 events - * @arg TIM_ICPSC_DIV4: capture is done once every 4 events - * @arg TIM_ICPSC_DIV8: capture is done once every 8 events - */ -#define __HAL_TIM_GET_ICPRESCALER(__HANDLE__, __CHANNEL__) \ - (((__CHANNEL__) == TIM_CHANNEL_1) ? ((__HANDLE__)->Instance->CCMR1 & TIM_CCMR1_IC1PSC) :\ - ((__CHANNEL__) == TIM_CHANNEL_2) ? (((__HANDLE__)->Instance->CCMR1 & TIM_CCMR1_IC2PSC) >> 8U) :\ - ((__CHANNEL__) == TIM_CHANNEL_3) ? ((__HANDLE__)->Instance->CCMR2 & TIM_CCMR2_IC3PSC) :\ - (((__HANDLE__)->Instance->CCMR2 & TIM_CCMR2_IC4PSC)) >> 8U) - -/** - * @brief Set the TIM Capture Compare Register value on runtime without calling another time ConfigChannel function. - * @param __HANDLE__ TIM handle. - * @param __CHANNEL__ TIM Channels to be configured. - * This parameter can be one of the following values: - * @arg TIM_CHANNEL_1: TIM Channel 1 selected - * @arg TIM_CHANNEL_2: TIM Channel 2 selected - * @arg TIM_CHANNEL_3: TIM Channel 3 selected - * @arg TIM_CHANNEL_4: TIM Channel 4 selected - * @arg TIM_CHANNEL_5: TIM Channel 5 selected - * @arg TIM_CHANNEL_6: TIM Channel 6 selected - * @param __COMPARE__ specifies the Capture Compare register new value. - * @retval None - */ -#define __HAL_TIM_SET_COMPARE(__HANDLE__, __CHANNEL__, __COMPARE__) \ -(((__CHANNEL__) == TIM_CHANNEL_1) ? ((__HANDLE__)->Instance->CCR1 = (__COMPARE__)) :\ - ((__CHANNEL__) == TIM_CHANNEL_2) ? ((__HANDLE__)->Instance->CCR2 = (__COMPARE__)) :\ - ((__CHANNEL__) == TIM_CHANNEL_3) ? ((__HANDLE__)->Instance->CCR3 = (__COMPARE__)) :\ - ((__CHANNEL__) == TIM_CHANNEL_4) ? ((__HANDLE__)->Instance->CCR4 = (__COMPARE__)) :\ - ((__CHANNEL__) == TIM_CHANNEL_5) ? ((__HANDLE__)->Instance->CCR5 = (__COMPARE__)) :\ - ((__HANDLE__)->Instance->CCR6 = (__COMPARE__))) - -/** - * @brief Get the TIM Capture Compare Register value on runtime. - * @param __HANDLE__ TIM handle. - * @param __CHANNEL__ TIM Channel associated with the capture compare register - * This parameter can be one of the following values: - * @arg TIM_CHANNEL_1: get capture/compare 1 register value - * @arg TIM_CHANNEL_2: get capture/compare 2 register value - * @arg TIM_CHANNEL_3: get capture/compare 3 register value - * @arg TIM_CHANNEL_4: get capture/compare 4 register value - * @arg TIM_CHANNEL_5: get capture/compare 5 register value - * @arg TIM_CHANNEL_6: get capture/compare 6 register value - * @retval 16-bit or 32-bit value of the capture/compare register (TIMx_CCRy) - */ -#define __HAL_TIM_GET_COMPARE(__HANDLE__, __CHANNEL__) \ -(((__CHANNEL__) == TIM_CHANNEL_1) ? ((__HANDLE__)->Instance->CCR1) :\ - ((__CHANNEL__) == TIM_CHANNEL_2) ? ((__HANDLE__)->Instance->CCR2) :\ - ((__CHANNEL__) == TIM_CHANNEL_3) ? ((__HANDLE__)->Instance->CCR3) :\ - ((__CHANNEL__) == TIM_CHANNEL_4) ? ((__HANDLE__)->Instance->CCR4) :\ - ((__CHANNEL__) == TIM_CHANNEL_5) ? ((__HANDLE__)->Instance->CCR5) :\ - ((__HANDLE__)->Instance->CCR6)) - -/** - * @brief Set the TIM Output compare preload. - * @param __HANDLE__ TIM handle. - * @param __CHANNEL__ TIM Channels to be configured. - * This parameter can be one of the following values: - * @arg TIM_CHANNEL_1: TIM Channel 1 selected - * @arg TIM_CHANNEL_2: TIM Channel 2 selected - * @arg TIM_CHANNEL_3: TIM Channel 3 selected - * @arg TIM_CHANNEL_4: TIM Channel 4 selected - * @arg TIM_CHANNEL_5: TIM Channel 5 selected - * @arg TIM_CHANNEL_6: TIM Channel 6 selected - * @retval None - */ -#define __HAL_TIM_ENABLE_OCxPRELOAD(__HANDLE__, __CHANNEL__) \ - (((__CHANNEL__) == TIM_CHANNEL_1) ? ((__HANDLE__)->Instance->CCMR1 |= TIM_CCMR1_OC1PE) :\ - ((__CHANNEL__) == TIM_CHANNEL_2) ? ((__HANDLE__)->Instance->CCMR1 |= TIM_CCMR1_OC2PE) :\ - ((__CHANNEL__) == TIM_CHANNEL_3) ? ((__HANDLE__)->Instance->CCMR2 |= TIM_CCMR2_OC3PE) :\ - ((__CHANNEL__) == TIM_CHANNEL_4) ? ((__HANDLE__)->Instance->CCMR2 |= TIM_CCMR2_OC4PE) :\ - ((__CHANNEL__) == TIM_CHANNEL_5) ? ((__HANDLE__)->Instance->CCMR3 |= TIM_CCMR3_OC5PE) :\ - ((__HANDLE__)->Instance->CCMR3 |= TIM_CCMR3_OC6PE)) - -/** - * @brief Reset the TIM Output compare preload. - * @param __HANDLE__ TIM handle. - * @param __CHANNEL__ TIM Channels to be configured. - * This parameter can be one of the following values: - * @arg TIM_CHANNEL_1: TIM Channel 1 selected - * @arg TIM_CHANNEL_2: TIM Channel 2 selected - * @arg TIM_CHANNEL_3: TIM Channel 3 selected - * @arg TIM_CHANNEL_4: TIM Channel 4 selected - * @arg TIM_CHANNEL_5: TIM Channel 5 selected - * @arg TIM_CHANNEL_6: TIM Channel 6 selected - * @retval None - */ -#define __HAL_TIM_DISABLE_OCxPRELOAD(__HANDLE__, __CHANNEL__) \ - (((__CHANNEL__) == TIM_CHANNEL_1) ? ((__HANDLE__)->Instance->CCMR1 &= (uint16_t)~TIM_CCMR1_OC1PE) :\ - ((__CHANNEL__) == TIM_CHANNEL_2) ? ((__HANDLE__)->Instance->CCMR1 &= (uint16_t)~TIM_CCMR1_OC2PE) :\ - ((__CHANNEL__) == TIM_CHANNEL_3) ? ((__HANDLE__)->Instance->CCMR2 &= (uint16_t)~TIM_CCMR2_OC3PE) :\ - ((__CHANNEL__) == TIM_CHANNEL_4) ? ((__HANDLE__)->Instance->CCMR2 &= (uint16_t)~TIM_CCMR2_OC4PE) :\ - ((__CHANNEL__) == TIM_CHANNEL_5) ? ((__HANDLE__)->Instance->CCMR3 &= (uint16_t)~TIM_CCMR3_OC5PE) :\ - ((__HANDLE__)->Instance->CCMR3 &= (uint16_t)~TIM_CCMR3_OC6PE)) - -/** - * @brief Set the Update Request Source (URS) bit of the TIMx_CR1 register. - * @param __HANDLE__ TIM handle. - * @note When the URS bit of the TIMx_CR1 register is set, only counter - * overflow/underflow generates an update interrupt or DMA request (if - * enabled) - * @retval None - */ -#define __HAL_TIM_URS_ENABLE(__HANDLE__) \ - ((__HANDLE__)->Instance->CR1|= TIM_CR1_URS) - -/** - * @brief Reset the Update Request Source (URS) bit of the TIMx_CR1 register. - * @param __HANDLE__ TIM handle. - * @note When the URS bit of the TIMx_CR1 register is reset, any of the - * following events generate an update interrupt or DMA request (if - * enabled): - * _ Counter overflow underflow - * _ Setting the UG bit - * _ Update generation through the slave mode controller - * @retval None - */ -#define __HAL_TIM_URS_DISABLE(__HANDLE__) \ - ((__HANDLE__)->Instance->CR1&=~TIM_CR1_URS) - -/** - * @brief Set the TIM Capture x input polarity on runtime. - * @param __HANDLE__ TIM handle. - * @param __CHANNEL__ TIM Channels to be configured. - * This parameter can be one of the following values: - * @arg TIM_CHANNEL_1: TIM Channel 1 selected - * @arg TIM_CHANNEL_2: TIM Channel 2 selected - * @arg TIM_CHANNEL_3: TIM Channel 3 selected - * @arg TIM_CHANNEL_4: TIM Channel 4 selected - * @param __POLARITY__ Polarity for TIx source - * @arg TIM_INPUTCHANNELPOLARITY_RISING: Rising Edge - * @arg TIM_INPUTCHANNELPOLARITY_FALLING: Falling Edge - * @arg TIM_INPUTCHANNELPOLARITY_BOTHEDGE: Rising and Falling Edge - * @retval None - */ -#define __HAL_TIM_SET_CAPTUREPOLARITY(__HANDLE__, __CHANNEL__, __POLARITY__) \ - do{ \ - TIM_RESET_CAPTUREPOLARITY((__HANDLE__), (__CHANNEL__)); \ - TIM_SET_CAPTUREPOLARITY((__HANDLE__), (__CHANNEL__), (__POLARITY__)); \ - }while(0) - -/** - * @} - */ -/* End of exported macros ----------------------------------------------------*/ - -/* Private constants ---------------------------------------------------------*/ -/** @defgroup TIM_Private_Constants TIM Private Constants - * @{ - */ -/* The counter of a timer instance is disabled only if all the CCx and CCxN - channels have been disabled */ -#define TIM_CCER_CCxE_MASK ((uint32_t)(TIM_CCER_CC1E | TIM_CCER_CC2E | TIM_CCER_CC3E | TIM_CCER_CC4E)) -#define TIM_CCER_CCxNE_MASK ((uint32_t)(TIM_CCER_CC1NE | TIM_CCER_CC2NE | TIM_CCER_CC3NE)) -/** - * @} - */ -/* End of private constants --------------------------------------------------*/ - -/* Private macros ------------------------------------------------------------*/ -/** @defgroup TIM_Private_Macros TIM Private Macros - * @{ - */ -#define IS_TIM_CLEARINPUT_SOURCE(__MODE__) (((__MODE__) == TIM_CLEARINPUTSOURCE_NONE) || \ - ((__MODE__) == TIM_CLEARINPUTSOURCE_ETR)) - -#if defined(TIM_AF1_BKINE)&&defined(TIM_AF2_BKINE) -#define IS_TIM_DMA_BASE(__BASE__) (((__BASE__) == TIM_DMABASE_CR1) || \ - ((__BASE__) == TIM_DMABASE_CR2) || \ - ((__BASE__) == TIM_DMABASE_SMCR) || \ - ((__BASE__) == TIM_DMABASE_DIER) || \ - ((__BASE__) == TIM_DMABASE_SR) || \ - ((__BASE__) == TIM_DMABASE_EGR) || \ - ((__BASE__) == TIM_DMABASE_CCMR1) || \ - ((__BASE__) == TIM_DMABASE_CCMR2) || \ - ((__BASE__) == TIM_DMABASE_CCER) || \ - ((__BASE__) == TIM_DMABASE_CNT) || \ - ((__BASE__) == TIM_DMABASE_PSC) || \ - ((__BASE__) == TIM_DMABASE_ARR) || \ - ((__BASE__) == TIM_DMABASE_RCR) || \ - ((__BASE__) == TIM_DMABASE_CCR1) || \ - ((__BASE__) == TIM_DMABASE_CCR2) || \ - ((__BASE__) == TIM_DMABASE_CCR3) || \ - ((__BASE__) == TIM_DMABASE_CCR4) || \ - ((__BASE__) == TIM_DMABASE_BDTR) || \ - ((__BASE__) == TIM_DMABASE_OR) || \ - ((__BASE__) == TIM_DMABASE_CCMR3) || \ - ((__BASE__) == TIM_DMABASE_CCR5) || \ - ((__BASE__) == TIM_DMABASE_CCR6) || \ - ((__BASE__) == TIM_DMABASE_AF1) || \ - ((__BASE__) == TIM_DMABASE_AF2)) -#else -#define IS_TIM_DMA_BASE(__BASE__) (((__BASE__) == TIM_DMABASE_CR1) || \ - ((__BASE__) == TIM_DMABASE_CR2) || \ - ((__BASE__) == TIM_DMABASE_SMCR) || \ - ((__BASE__) == TIM_DMABASE_DIER) || \ - ((__BASE__) == TIM_DMABASE_SR) || \ - ((__BASE__) == TIM_DMABASE_EGR) || \ - ((__BASE__) == TIM_DMABASE_CCMR1) || \ - ((__BASE__) == TIM_DMABASE_CCMR2) || \ - ((__BASE__) == TIM_DMABASE_CCER) || \ - ((__BASE__) == TIM_DMABASE_CNT) || \ - ((__BASE__) == TIM_DMABASE_PSC) || \ - ((__BASE__) == TIM_DMABASE_ARR) || \ - ((__BASE__) == TIM_DMABASE_RCR) || \ - ((__BASE__) == TIM_DMABASE_CCR1) || \ - ((__BASE__) == TIM_DMABASE_CCR2) || \ - ((__BASE__) == TIM_DMABASE_CCR3) || \ - ((__BASE__) == TIM_DMABASE_CCR4) || \ - ((__BASE__) == TIM_DMABASE_BDTR) || \ - ((__BASE__) == TIM_DMABASE_OR) || \ - ((__BASE__) == TIM_DMABASE_CCMR3) || \ - ((__BASE__) == TIM_DMABASE_CCR5) || \ - ((__BASE__) == TIM_DMABASE_CCR6)) -#endif /* TIM_AF1_BKINE && TIM_AF1_BKINE */ - -#define IS_TIM_EVENT_SOURCE(__SOURCE__) ((((__SOURCE__) & 0xFFFFFE00U) == 0x00000000U) && ((__SOURCE__) != 0x00000000U)) - -#define IS_TIM_COUNTER_MODE(__MODE__) (((__MODE__) == TIM_COUNTERMODE_UP) || \ - ((__MODE__) == TIM_COUNTERMODE_DOWN) || \ - ((__MODE__) == TIM_COUNTERMODE_CENTERALIGNED1) || \ - ((__MODE__) == TIM_COUNTERMODE_CENTERALIGNED2) || \ - ((__MODE__) == TIM_COUNTERMODE_CENTERALIGNED3)) - -#define IS_TIM_CLOCKDIVISION_DIV(__DIV__) (((__DIV__) == TIM_CLOCKDIVISION_DIV1) || \ - ((__DIV__) == TIM_CLOCKDIVISION_DIV2) || \ - ((__DIV__) == TIM_CLOCKDIVISION_DIV4)) - -#define IS_TIM_AUTORELOAD_PRELOAD(PRELOAD) (((PRELOAD) == TIM_AUTORELOAD_PRELOAD_DISABLE) || \ - ((PRELOAD) == TIM_AUTORELOAD_PRELOAD_ENABLE)) - -#define IS_TIM_FAST_STATE(__STATE__) (((__STATE__) == TIM_OCFAST_DISABLE) || \ - ((__STATE__) == TIM_OCFAST_ENABLE)) - -#define IS_TIM_OC_POLARITY(__POLARITY__) (((__POLARITY__) == TIM_OCPOLARITY_HIGH) || \ - ((__POLARITY__) == TIM_OCPOLARITY_LOW)) - -#define IS_TIM_OCN_POLARITY(__POLARITY__) (((__POLARITY__) == TIM_OCNPOLARITY_HIGH) || \ - ((__POLARITY__) == TIM_OCNPOLARITY_LOW)) - -#define IS_TIM_OCIDLE_STATE(__STATE__) (((__STATE__) == TIM_OCIDLESTATE_SET) || \ - ((__STATE__) == TIM_OCIDLESTATE_RESET)) - -#define IS_TIM_OCNIDLE_STATE(__STATE__) (((__STATE__) == TIM_OCNIDLESTATE_SET) || \ - ((__STATE__) == TIM_OCNIDLESTATE_RESET)) - -#define IS_TIM_IC_POLARITY(__POLARITY__) (((__POLARITY__) == TIM_ICPOLARITY_RISING) || \ - ((__POLARITY__) == TIM_ICPOLARITY_FALLING) || \ - ((__POLARITY__) == TIM_ICPOLARITY_BOTHEDGE)) - -#define IS_TIM_IC_SELECTION(__SELECTION__) (((__SELECTION__) == TIM_ICSELECTION_DIRECTTI) || \ - ((__SELECTION__) == TIM_ICSELECTION_INDIRECTTI) || \ - ((__SELECTION__) == TIM_ICSELECTION_TRC)) - -#define IS_TIM_IC_PRESCALER(__PRESCALER__) (((__PRESCALER__) == TIM_ICPSC_DIV1) || \ - ((__PRESCALER__) == TIM_ICPSC_DIV2) || \ - ((__PRESCALER__) == TIM_ICPSC_DIV4) || \ - ((__PRESCALER__) == TIM_ICPSC_DIV8)) - -#define IS_TIM_OPM_MODE(__MODE__) (((__MODE__) == TIM_OPMODE_SINGLE) || \ - ((__MODE__) == TIM_OPMODE_REPETITIVE)) - -#define IS_TIM_ENCODER_MODE(__MODE__) (((__MODE__) == TIM_ENCODERMODE_TI1) || \ - ((__MODE__) == TIM_ENCODERMODE_TI2) || \ - ((__MODE__) == TIM_ENCODERMODE_TI12)) - -#define IS_TIM_DMA_SOURCE(__SOURCE__) ((((__SOURCE__) & 0xFFFF80FFU) == 0x00000000U) && ((__SOURCE__) != 0x00000000U)) - -#define IS_TIM_CHANNELS(__CHANNEL__) (((__CHANNEL__) == TIM_CHANNEL_1) || \ - ((__CHANNEL__) == TIM_CHANNEL_2) || \ - ((__CHANNEL__) == TIM_CHANNEL_3) || \ - ((__CHANNEL__) == TIM_CHANNEL_4) || \ - ((__CHANNEL__) == TIM_CHANNEL_5) || \ - ((__CHANNEL__) == TIM_CHANNEL_6) || \ - ((__CHANNEL__) == TIM_CHANNEL_ALL)) - -#define IS_TIM_OPM_CHANNELS(__CHANNEL__) (((__CHANNEL__) == TIM_CHANNEL_1) || \ - ((__CHANNEL__) == TIM_CHANNEL_2)) - -#define IS_TIM_COMPLEMENTARY_CHANNELS(__CHANNEL__) (((__CHANNEL__) == TIM_CHANNEL_1) || \ - ((__CHANNEL__) == TIM_CHANNEL_2) || \ - ((__CHANNEL__) == TIM_CHANNEL_3)) - -#define IS_TIM_CLOCKSOURCE(__CLOCK__) (((__CLOCK__) == TIM_CLOCKSOURCE_INTERNAL) || \ - ((__CLOCK__) == TIM_CLOCKSOURCE_ETRMODE2) || \ - ((__CLOCK__) == TIM_CLOCKSOURCE_ITR0) || \ - ((__CLOCK__) == TIM_CLOCKSOURCE_ITR1) || \ - ((__CLOCK__) == TIM_CLOCKSOURCE_ITR2) || \ - ((__CLOCK__) == TIM_CLOCKSOURCE_ITR3) || \ - ((__CLOCK__) == TIM_CLOCKSOURCE_TI1ED) || \ - ((__CLOCK__) == TIM_CLOCKSOURCE_TI1) || \ - ((__CLOCK__) == TIM_CLOCKSOURCE_TI2) || \ - ((__CLOCK__) == TIM_CLOCKSOURCE_ETRMODE1)) - -#define IS_TIM_CLOCKPOLARITY(__POLARITY__) (((__POLARITY__) == TIM_CLOCKPOLARITY_INVERTED) || \ - ((__POLARITY__) == TIM_CLOCKPOLARITY_NONINVERTED) || \ - ((__POLARITY__) == TIM_CLOCKPOLARITY_RISING) || \ - ((__POLARITY__) == TIM_CLOCKPOLARITY_FALLING) || \ - ((__POLARITY__) == TIM_CLOCKPOLARITY_BOTHEDGE)) - -#define IS_TIM_CLOCKPRESCALER(__PRESCALER__) (((__PRESCALER__) == TIM_CLOCKPRESCALER_DIV1) || \ - ((__PRESCALER__) == TIM_CLOCKPRESCALER_DIV2) || \ - ((__PRESCALER__) == TIM_CLOCKPRESCALER_DIV4) || \ - ((__PRESCALER__) == TIM_CLOCKPRESCALER_DIV8)) - -#define IS_TIM_CLOCKFILTER(__ICFILTER__) ((__ICFILTER__) <= 0xFU) - -#define IS_TIM_CLEARINPUT_POLARITY(__POLARITY__) (((__POLARITY__) == TIM_CLEARINPUTPOLARITY_INVERTED) || \ - ((__POLARITY__) == TIM_CLEARINPUTPOLARITY_NONINVERTED)) - -#define IS_TIM_CLEARINPUT_PRESCALER(__PRESCALER__) (((__PRESCALER__) == TIM_CLEARINPUTPRESCALER_DIV1) || \ - ((__PRESCALER__) == TIM_CLEARINPUTPRESCALER_DIV2) || \ - ((__PRESCALER__) == TIM_CLEARINPUTPRESCALER_DIV4) || \ - ((__PRESCALER__) == TIM_CLEARINPUTPRESCALER_DIV8)) - -#define IS_TIM_CLEARINPUT_FILTER(__ICFILTER__) ((__ICFILTER__) <= 0xFU) - -#define IS_TIM_OSSR_STATE(__STATE__) (((__STATE__) == TIM_OSSR_ENABLE) || \ - ((__STATE__) == TIM_OSSR_DISABLE)) - -#define IS_TIM_OSSI_STATE(__STATE__) (((__STATE__) == TIM_OSSI_ENABLE) || \ - ((__STATE__) == TIM_OSSI_DISABLE)) - -#define IS_TIM_LOCK_LEVEL(__LEVEL__) (((__LEVEL__) == TIM_LOCKLEVEL_OFF) || \ - ((__LEVEL__) == TIM_LOCKLEVEL_1) || \ - ((__LEVEL__) == TIM_LOCKLEVEL_2) || \ - ((__LEVEL__) == TIM_LOCKLEVEL_3)) - -#define IS_TIM_BREAK_FILTER(__BRKFILTER__) ((__BRKFILTER__) <= 0xFUL) - - -#define IS_TIM_BREAK_STATE(__STATE__) (((__STATE__) == TIM_BREAK_ENABLE) || \ - ((__STATE__) == TIM_BREAK_DISABLE)) - -#define IS_TIM_BREAK_POLARITY(__POLARITY__) (((__POLARITY__) == TIM_BREAKPOLARITY_LOW) || \ - ((__POLARITY__) == TIM_BREAKPOLARITY_HIGH)) - -#define IS_TIM_BREAK2_STATE(__STATE__) (((__STATE__) == TIM_BREAK2_ENABLE) || \ - ((__STATE__) == TIM_BREAK2_DISABLE)) - -#define IS_TIM_BREAK2_POLARITY(__POLARITY__) (((__POLARITY__) == TIM_BREAK2POLARITY_LOW) || \ - ((__POLARITY__) == TIM_BREAK2POLARITY_HIGH)) - -#define IS_TIM_AUTOMATIC_OUTPUT_STATE(__STATE__) (((__STATE__) == TIM_AUTOMATICOUTPUT_ENABLE) || \ - ((__STATE__) == TIM_AUTOMATICOUTPUT_DISABLE)) - -#define IS_TIM_GROUPCH5(__OCREF__) ((((__OCREF__) & 0x1FFFFFFFU) == 0x00000000U)) - -#define IS_TIM_TRGO_SOURCE(__SOURCE__) (((__SOURCE__) == TIM_TRGO_RESET) || \ - ((__SOURCE__) == TIM_TRGO_ENABLE) || \ - ((__SOURCE__) == TIM_TRGO_UPDATE) || \ - ((__SOURCE__) == TIM_TRGO_OC1) || \ - ((__SOURCE__) == TIM_TRGO_OC1REF) || \ - ((__SOURCE__) == TIM_TRGO_OC2REF) || \ - ((__SOURCE__) == TIM_TRGO_OC3REF) || \ - ((__SOURCE__) == TIM_TRGO_OC4REF)) - -#define IS_TIM_TRGO2_SOURCE(__SOURCE__) (((__SOURCE__) == TIM_TRGO2_RESET) || \ - ((__SOURCE__) == TIM_TRGO2_ENABLE) || \ - ((__SOURCE__) == TIM_TRGO2_UPDATE) || \ - ((__SOURCE__) == TIM_TRGO2_OC1) || \ - ((__SOURCE__) == TIM_TRGO2_OC1REF) || \ - ((__SOURCE__) == TIM_TRGO2_OC2REF) || \ - ((__SOURCE__) == TIM_TRGO2_OC3REF) || \ - ((__SOURCE__) == TIM_TRGO2_OC3REF) || \ - ((__SOURCE__) == TIM_TRGO2_OC4REF) || \ - ((__SOURCE__) == TIM_TRGO2_OC5REF) || \ - ((__SOURCE__) == TIM_TRGO2_OC6REF) || \ - ((__SOURCE__) == TIM_TRGO2_OC4REF_RISINGFALLING) || \ - ((__SOURCE__) == TIM_TRGO2_OC6REF_RISINGFALLING) || \ - ((__SOURCE__) == TIM_TRGO2_OC4REF_RISING_OC6REF_RISING) || \ - ((__SOURCE__) == TIM_TRGO2_OC4REF_RISING_OC6REF_FALLING) || \ - ((__SOURCE__) == TIM_TRGO2_OC5REF_RISING_OC6REF_RISING) || \ - ((__SOURCE__) == TIM_TRGO2_OC5REF_RISING_OC6REF_FALLING)) - -#define IS_TIM_MSM_STATE(__STATE__) (((__STATE__) == TIM_MASTERSLAVEMODE_ENABLE) || \ - ((__STATE__) == TIM_MASTERSLAVEMODE_DISABLE)) - -#define IS_TIM_SLAVE_MODE(__MODE__) (((__MODE__) == TIM_SLAVEMODE_DISABLE) || \ - ((__MODE__) == TIM_SLAVEMODE_RESET) || \ - ((__MODE__) == TIM_SLAVEMODE_GATED) || \ - ((__MODE__) == TIM_SLAVEMODE_TRIGGER) || \ - ((__MODE__) == TIM_SLAVEMODE_EXTERNAL1) || \ - ((__MODE__) == TIM_SLAVEMODE_COMBINED_RESETTRIGGER)) - -#define IS_TIM_PWM_MODE(__MODE__) (((__MODE__) == TIM_OCMODE_PWM1) || \ - ((__MODE__) == TIM_OCMODE_PWM2) || \ - ((__MODE__) == TIM_OCMODE_COMBINED_PWM1) || \ - ((__MODE__) == TIM_OCMODE_COMBINED_PWM2) || \ - ((__MODE__) == TIM_OCMODE_ASSYMETRIC_PWM1) || \ - ((__MODE__) == TIM_OCMODE_ASSYMETRIC_PWM2)) - -#define IS_TIM_OC_MODE(__MODE__) (((__MODE__) == TIM_OCMODE_TIMING) || \ - ((__MODE__) == TIM_OCMODE_ACTIVE) || \ - ((__MODE__) == TIM_OCMODE_INACTIVE) || \ - ((__MODE__) == TIM_OCMODE_TOGGLE) || \ - ((__MODE__) == TIM_OCMODE_FORCED_ACTIVE) || \ - ((__MODE__) == TIM_OCMODE_FORCED_INACTIVE) || \ - ((__MODE__) == TIM_OCMODE_RETRIGERRABLE_OPM1) || \ - ((__MODE__) == TIM_OCMODE_RETRIGERRABLE_OPM2)) - -#define IS_TIM_TRIGGER_SELECTION(__SELECTION__) (((__SELECTION__) == TIM_TS_ITR0) || \ - ((__SELECTION__) == TIM_TS_ITR1) || \ - ((__SELECTION__) == TIM_TS_ITR2) || \ - ((__SELECTION__) == TIM_TS_ITR3) || \ - ((__SELECTION__) == TIM_TS_TI1F_ED) || \ - ((__SELECTION__) == TIM_TS_TI1FP1) || \ - ((__SELECTION__) == TIM_TS_TI2FP2) || \ - ((__SELECTION__) == TIM_TS_ETRF)) - -#define IS_TIM_INTERNAL_TRIGGEREVENT_SELECTION(__SELECTION__) (((__SELECTION__) == TIM_TS_ITR0) || \ - ((__SELECTION__) == TIM_TS_ITR1) || \ - ((__SELECTION__) == TIM_TS_ITR2) || \ - ((__SELECTION__) == TIM_TS_ITR3) || \ - ((__SELECTION__) == TIM_TS_NONE)) - -#define IS_TIM_TRIGGERPOLARITY(__POLARITY__) (((__POLARITY__) == TIM_TRIGGERPOLARITY_INVERTED ) || \ - ((__POLARITY__) == TIM_TRIGGERPOLARITY_NONINVERTED) || \ - ((__POLARITY__) == TIM_TRIGGERPOLARITY_RISING ) || \ - ((__POLARITY__) == TIM_TRIGGERPOLARITY_FALLING ) || \ - ((__POLARITY__) == TIM_TRIGGERPOLARITY_BOTHEDGE )) - -#define IS_TIM_TRIGGERPRESCALER(__PRESCALER__) (((__PRESCALER__) == TIM_TRIGGERPRESCALER_DIV1) || \ - ((__PRESCALER__) == TIM_TRIGGERPRESCALER_DIV2) || \ - ((__PRESCALER__) == TIM_TRIGGERPRESCALER_DIV4) || \ - ((__PRESCALER__) == TIM_TRIGGERPRESCALER_DIV8)) - -#define IS_TIM_TRIGGERFILTER(__ICFILTER__) ((__ICFILTER__) <= 0xFU) - -#define IS_TIM_TI1SELECTION(__TI1SELECTION__) (((__TI1SELECTION__) == TIM_TI1SELECTION_CH1) || \ - ((__TI1SELECTION__) == TIM_TI1SELECTION_XORCOMBINATION)) - -#define IS_TIM_DMA_LENGTH(__LENGTH__) (((__LENGTH__) == TIM_DMABURSTLENGTH_1TRANSFER) || \ - ((__LENGTH__) == TIM_DMABURSTLENGTH_2TRANSFERS) || \ - ((__LENGTH__) == TIM_DMABURSTLENGTH_3TRANSFERS) || \ - ((__LENGTH__) == TIM_DMABURSTLENGTH_4TRANSFERS) || \ - ((__LENGTH__) == TIM_DMABURSTLENGTH_5TRANSFERS) || \ - ((__LENGTH__) == TIM_DMABURSTLENGTH_6TRANSFERS) || \ - ((__LENGTH__) == TIM_DMABURSTLENGTH_7TRANSFERS) || \ - ((__LENGTH__) == TIM_DMABURSTLENGTH_8TRANSFERS) || \ - ((__LENGTH__) == TIM_DMABURSTLENGTH_9TRANSFERS) || \ - ((__LENGTH__) == TIM_DMABURSTLENGTH_10TRANSFERS) || \ - ((__LENGTH__) == TIM_DMABURSTLENGTH_11TRANSFERS) || \ - ((__LENGTH__) == TIM_DMABURSTLENGTH_12TRANSFERS) || \ - ((__LENGTH__) == TIM_DMABURSTLENGTH_13TRANSFERS) || \ - ((__LENGTH__) == TIM_DMABURSTLENGTH_14TRANSFERS) || \ - ((__LENGTH__) == TIM_DMABURSTLENGTH_15TRANSFERS) || \ - ((__LENGTH__) == TIM_DMABURSTLENGTH_16TRANSFERS) || \ - ((__LENGTH__) == TIM_DMABURSTLENGTH_17TRANSFERS) || \ - ((__LENGTH__) == TIM_DMABURSTLENGTH_18TRANSFERS)) - -#define IS_TIM_IC_FILTER(__ICFILTER__) ((__ICFILTER__) <= 0xFU) - -#define IS_TIM_DEADTIME(__DEADTIME__) ((__DEADTIME__) <= 0xFFU) - -#define IS_TIM_BREAK_SYSTEM(__CONFIG__) (((__CONFIG__) == TIM_BREAK_SYSTEM_ECC) || \ - ((__CONFIG__) == TIM_BREAK_SYSTEM_PVD) || \ - ((__CONFIG__) == TIM_BREAK_SYSTEM_SRAM_PARITY_ERROR) || \ - ((__CONFIG__) == TIM_BREAK_SYSTEM_LOCKUP)) - -#define IS_TIM_SLAVEMODE_TRIGGER_ENABLED(__TRIGGER__) (((__TRIGGER__) == TIM_SLAVEMODE_TRIGGER) || \ - ((__TRIGGER__) == TIM_SLAVEMODE_COMBINED_RESETTRIGGER)) - -#define TIM_SET_ICPRESCALERVALUE(__HANDLE__, __CHANNEL__, __ICPSC__) \ -(((__CHANNEL__) == TIM_CHANNEL_1) ? ((__HANDLE__)->Instance->CCMR1 |= (__ICPSC__)) :\ - ((__CHANNEL__) == TIM_CHANNEL_2) ? ((__HANDLE__)->Instance->CCMR1 |= ((__ICPSC__) << 8U)) :\ - ((__CHANNEL__) == TIM_CHANNEL_3) ? ((__HANDLE__)->Instance->CCMR2 |= (__ICPSC__)) :\ - ((__HANDLE__)->Instance->CCMR2 |= ((__ICPSC__) << 8U))) - -#define TIM_RESET_ICPRESCALERVALUE(__HANDLE__, __CHANNEL__) \ -(((__CHANNEL__) == TIM_CHANNEL_1) ? ((__HANDLE__)->Instance->CCMR1 &= (uint16_t)~TIM_CCMR1_IC1PSC) :\ - ((__CHANNEL__) == TIM_CHANNEL_2) ? ((__HANDLE__)->Instance->CCMR1 &= (uint16_t)~TIM_CCMR1_IC2PSC) :\ - ((__CHANNEL__) == TIM_CHANNEL_3) ? ((__HANDLE__)->Instance->CCMR2 &= (uint16_t)~TIM_CCMR2_IC3PSC) :\ - ((__HANDLE__)->Instance->CCMR2 &= (uint16_t)~TIM_CCMR2_IC4PSC)) - -#define TIM_SET_CAPTUREPOLARITY(__HANDLE__, __CHANNEL__, __POLARITY__) \ -(((__CHANNEL__) == TIM_CHANNEL_1) ? ((__HANDLE__)->Instance->CCER |= (__POLARITY__)) :\ - ((__CHANNEL__) == TIM_CHANNEL_2) ? ((__HANDLE__)->Instance->CCER |= ((__POLARITY__) << 4U)) :\ - ((__CHANNEL__) == TIM_CHANNEL_3) ? ((__HANDLE__)->Instance->CCER |= ((__POLARITY__) << 8U)) :\ - ((__HANDLE__)->Instance->CCER |= (((__POLARITY__) << 12U)))) - -#define TIM_RESET_CAPTUREPOLARITY(__HANDLE__, __CHANNEL__) \ -(((__CHANNEL__) == TIM_CHANNEL_1) ? ((__HANDLE__)->Instance->CCER &= (uint16_t)~(TIM_CCER_CC1P | TIM_CCER_CC1NP)) :\ - ((__CHANNEL__) == TIM_CHANNEL_2) ? ((__HANDLE__)->Instance->CCER &= (uint16_t)~(TIM_CCER_CC2P | TIM_CCER_CC2NP)) :\ - ((__CHANNEL__) == TIM_CHANNEL_3) ? ((__HANDLE__)->Instance->CCER &= (uint16_t)~(TIM_CCER_CC3P | TIM_CCER_CC3NP)) :\ - ((__HANDLE__)->Instance->CCER &= (uint16_t)~(TIM_CCER_CC4P | TIM_CCER_CC4NP))) - -/** - * @} - */ -/* End of private macros -----------------------------------------------------*/ - -/* Include TIM HAL Extended module */ -#include "stm32f7xx_hal_tim_ex.h" - -/* Exported functions --------------------------------------------------------*/ -/** @addtogroup TIM_Exported_Functions TIM Exported Functions - * @{ - */ - -/** @addtogroup TIM_Exported_Functions_Group1 TIM Time Base functions - * @brief Time Base functions - * @{ - */ -/* Time Base functions ********************************************************/ -HAL_StatusTypeDef HAL_TIM_Base_Init(TIM_HandleTypeDef *htim); -HAL_StatusTypeDef HAL_TIM_Base_DeInit(TIM_HandleTypeDef *htim); -void HAL_TIM_Base_MspInit(TIM_HandleTypeDef *htim); -void HAL_TIM_Base_MspDeInit(TIM_HandleTypeDef *htim); -/* Blocking mode: Polling */ -HAL_StatusTypeDef HAL_TIM_Base_Start(TIM_HandleTypeDef *htim); -HAL_StatusTypeDef HAL_TIM_Base_Stop(TIM_HandleTypeDef *htim); -/* Non-Blocking mode: Interrupt */ -HAL_StatusTypeDef HAL_TIM_Base_Start_IT(TIM_HandleTypeDef *htim); -HAL_StatusTypeDef HAL_TIM_Base_Stop_IT(TIM_HandleTypeDef *htim); -/* Non-Blocking mode: DMA */ -HAL_StatusTypeDef HAL_TIM_Base_Start_DMA(TIM_HandleTypeDef *htim, uint32_t *pData, uint16_t Length); -HAL_StatusTypeDef HAL_TIM_Base_Stop_DMA(TIM_HandleTypeDef *htim); -/** - * @} - */ - -/** @addtogroup TIM_Exported_Functions_Group2 TIM Output Compare functions - * @brief TIM Output Compare functions - * @{ - */ -/* Timer Output Compare functions *********************************************/ -HAL_StatusTypeDef HAL_TIM_OC_Init(TIM_HandleTypeDef *htim); -HAL_StatusTypeDef HAL_TIM_OC_DeInit(TIM_HandleTypeDef *htim); -void HAL_TIM_OC_MspInit(TIM_HandleTypeDef *htim); -void HAL_TIM_OC_MspDeInit(TIM_HandleTypeDef *htim); -/* Blocking mode: Polling */ -HAL_StatusTypeDef HAL_TIM_OC_Start(TIM_HandleTypeDef *htim, uint32_t Channel); -HAL_StatusTypeDef HAL_TIM_OC_Stop(TIM_HandleTypeDef *htim, uint32_t Channel); -/* Non-Blocking mode: Interrupt */ -HAL_StatusTypeDef HAL_TIM_OC_Start_IT(TIM_HandleTypeDef *htim, uint32_t Channel); -HAL_StatusTypeDef HAL_TIM_OC_Stop_IT(TIM_HandleTypeDef *htim, uint32_t Channel); -/* Non-Blocking mode: DMA */ -HAL_StatusTypeDef HAL_TIM_OC_Start_DMA(TIM_HandleTypeDef *htim, uint32_t Channel, uint32_t *pData, uint16_t Length); -HAL_StatusTypeDef HAL_TIM_OC_Stop_DMA(TIM_HandleTypeDef *htim, uint32_t Channel); -/** - * @} - */ - -/** @addtogroup TIM_Exported_Functions_Group3 TIM PWM functions - * @brief TIM PWM functions - * @{ - */ -/* Timer PWM functions ********************************************************/ -HAL_StatusTypeDef HAL_TIM_PWM_Init(TIM_HandleTypeDef *htim); -HAL_StatusTypeDef HAL_TIM_PWM_DeInit(TIM_HandleTypeDef *htim); -void HAL_TIM_PWM_MspInit(TIM_HandleTypeDef *htim); -void HAL_TIM_PWM_MspDeInit(TIM_HandleTypeDef *htim); -/* Blocking mode: Polling */ -HAL_StatusTypeDef HAL_TIM_PWM_Start(TIM_HandleTypeDef *htim, uint32_t Channel); -HAL_StatusTypeDef HAL_TIM_PWM_Stop(TIM_HandleTypeDef *htim, uint32_t Channel); -/* Non-Blocking mode: Interrupt */ -HAL_StatusTypeDef HAL_TIM_PWM_Start_IT(TIM_HandleTypeDef *htim, uint32_t Channel); -HAL_StatusTypeDef HAL_TIM_PWM_Stop_IT(TIM_HandleTypeDef *htim, uint32_t Channel); -/* Non-Blocking mode: DMA */ -HAL_StatusTypeDef HAL_TIM_PWM_Start_DMA(TIM_HandleTypeDef *htim, uint32_t Channel, uint32_t *pData, uint16_t Length); -HAL_StatusTypeDef HAL_TIM_PWM_Stop_DMA(TIM_HandleTypeDef *htim, uint32_t Channel); -/** - * @} - */ - -/** @addtogroup TIM_Exported_Functions_Group4 TIM Input Capture functions - * @brief TIM Input Capture functions - * @{ - */ -/* Timer Input Capture functions **********************************************/ -HAL_StatusTypeDef HAL_TIM_IC_Init(TIM_HandleTypeDef *htim); -HAL_StatusTypeDef HAL_TIM_IC_DeInit(TIM_HandleTypeDef *htim); -void HAL_TIM_IC_MspInit(TIM_HandleTypeDef *htim); -void HAL_TIM_IC_MspDeInit(TIM_HandleTypeDef *htim); -/* Blocking mode: Polling */ -HAL_StatusTypeDef HAL_TIM_IC_Start(TIM_HandleTypeDef *htim, uint32_t Channel); -HAL_StatusTypeDef HAL_TIM_IC_Stop(TIM_HandleTypeDef *htim, uint32_t Channel); -/* Non-Blocking mode: Interrupt */ -HAL_StatusTypeDef HAL_TIM_IC_Start_IT(TIM_HandleTypeDef *htim, uint32_t Channel); -HAL_StatusTypeDef HAL_TIM_IC_Stop_IT(TIM_HandleTypeDef *htim, uint32_t Channel); -/* Non-Blocking mode: DMA */ -HAL_StatusTypeDef HAL_TIM_IC_Start_DMA(TIM_HandleTypeDef *htim, uint32_t Channel, uint32_t *pData, uint16_t Length); -HAL_StatusTypeDef HAL_TIM_IC_Stop_DMA(TIM_HandleTypeDef *htim, uint32_t Channel); -/** - * @} - */ - -/** @addtogroup TIM_Exported_Functions_Group5 TIM One Pulse functions - * @brief TIM One Pulse functions - * @{ - */ -/* Timer One Pulse functions **************************************************/ -HAL_StatusTypeDef HAL_TIM_OnePulse_Init(TIM_HandleTypeDef *htim, uint32_t OnePulseMode); -HAL_StatusTypeDef HAL_TIM_OnePulse_DeInit(TIM_HandleTypeDef *htim); -void HAL_TIM_OnePulse_MspInit(TIM_HandleTypeDef *htim); -void HAL_TIM_OnePulse_MspDeInit(TIM_HandleTypeDef *htim); -/* Blocking mode: Polling */ -HAL_StatusTypeDef HAL_TIM_OnePulse_Start(TIM_HandleTypeDef *htim, uint32_t OutputChannel); -HAL_StatusTypeDef HAL_TIM_OnePulse_Stop(TIM_HandleTypeDef *htim, uint32_t OutputChannel); -/* Non-Blocking mode: Interrupt */ -HAL_StatusTypeDef HAL_TIM_OnePulse_Start_IT(TIM_HandleTypeDef *htim, uint32_t OutputChannel); -HAL_StatusTypeDef HAL_TIM_OnePulse_Stop_IT(TIM_HandleTypeDef *htim, uint32_t OutputChannel); -/** - * @} - */ - -/** @addtogroup TIM_Exported_Functions_Group6 TIM Encoder functions - * @brief TIM Encoder functions - * @{ - */ -/* Timer Encoder functions ****************************************************/ -HAL_StatusTypeDef HAL_TIM_Encoder_Init(TIM_HandleTypeDef *htim, TIM_Encoder_InitTypeDef *sConfig); -HAL_StatusTypeDef HAL_TIM_Encoder_DeInit(TIM_HandleTypeDef *htim); -void HAL_TIM_Encoder_MspInit(TIM_HandleTypeDef *htim); -void HAL_TIM_Encoder_MspDeInit(TIM_HandleTypeDef *htim); -/* Blocking mode: Polling */ -HAL_StatusTypeDef HAL_TIM_Encoder_Start(TIM_HandleTypeDef *htim, uint32_t Channel); -HAL_StatusTypeDef HAL_TIM_Encoder_Stop(TIM_HandleTypeDef *htim, uint32_t Channel); -/* Non-Blocking mode: Interrupt */ -HAL_StatusTypeDef HAL_TIM_Encoder_Start_IT(TIM_HandleTypeDef *htim, uint32_t Channel); -HAL_StatusTypeDef HAL_TIM_Encoder_Stop_IT(TIM_HandleTypeDef *htim, uint32_t Channel); -/* Non-Blocking mode: DMA */ -HAL_StatusTypeDef HAL_TIM_Encoder_Start_DMA(TIM_HandleTypeDef *htim, uint32_t Channel, uint32_t *pData1, uint32_t *pData2, uint16_t Length); -HAL_StatusTypeDef HAL_TIM_Encoder_Stop_DMA(TIM_HandleTypeDef *htim, uint32_t Channel); -/** - * @} - */ - -/** @addtogroup TIM_Exported_Functions_Group7 TIM IRQ handler management - * @brief IRQ handler management - * @{ - */ -/* Interrupt Handler functions ***********************************************/ -void HAL_TIM_IRQHandler(TIM_HandleTypeDef *htim); -/** - * @} - */ - -/** @defgroup TIM_Exported_Functions_Group8 TIM Peripheral Control functions - * @brief Peripheral Control functions - * @{ - */ -/* Control functions *********************************************************/ -HAL_StatusTypeDef HAL_TIM_OC_ConfigChannel(TIM_HandleTypeDef *htim, TIM_OC_InitTypeDef *sConfig, uint32_t Channel); -HAL_StatusTypeDef HAL_TIM_PWM_ConfigChannel(TIM_HandleTypeDef *htim, TIM_OC_InitTypeDef *sConfig, uint32_t Channel); -HAL_StatusTypeDef HAL_TIM_IC_ConfigChannel(TIM_HandleTypeDef *htim, TIM_IC_InitTypeDef *sConfig, uint32_t Channel); -HAL_StatusTypeDef HAL_TIM_OnePulse_ConfigChannel(TIM_HandleTypeDef *htim, TIM_OnePulse_InitTypeDef *sConfig, uint32_t OutputChannel, uint32_t InputChannel); -HAL_StatusTypeDef HAL_TIM_ConfigOCrefClear(TIM_HandleTypeDef *htim, TIM_ClearInputConfigTypeDef *sClearInputConfig, uint32_t Channel); -HAL_StatusTypeDef HAL_TIM_ConfigClockSource(TIM_HandleTypeDef *htim, TIM_ClockConfigTypeDef *sClockSourceConfig); -HAL_StatusTypeDef HAL_TIM_ConfigTI1Input(TIM_HandleTypeDef *htim, uint32_t TI1_Selection); -HAL_StatusTypeDef HAL_TIM_SlaveConfigSynchro(TIM_HandleTypeDef *htim, TIM_SlaveConfigTypeDef *sSlaveConfig); -HAL_StatusTypeDef HAL_TIM_SlaveConfigSynchro_IT(TIM_HandleTypeDef *htim, TIM_SlaveConfigTypeDef *sSlaveConfig); -HAL_StatusTypeDef HAL_TIM_DMABurst_WriteStart(TIM_HandleTypeDef *htim, uint32_t BurstBaseAddress, uint32_t BurstRequestSrc, \ - uint32_t *BurstBuffer, uint32_t BurstLength); -HAL_StatusTypeDef HAL_TIM_DMABurst_WriteStop(TIM_HandleTypeDef *htim, uint32_t BurstRequestSrc); -HAL_StatusTypeDef HAL_TIM_DMABurst_ReadStart(TIM_HandleTypeDef *htim, uint32_t BurstBaseAddress, uint32_t BurstRequestSrc, \ - uint32_t *BurstBuffer, uint32_t BurstLength); -HAL_StatusTypeDef HAL_TIM_DMABurst_ReadStop(TIM_HandleTypeDef *htim, uint32_t BurstRequestSrc); -HAL_StatusTypeDef HAL_TIM_GenerateEvent(TIM_HandleTypeDef *htim, uint32_t EventSource); -uint32_t HAL_TIM_ReadCapturedValue(TIM_HandleTypeDef *htim, uint32_t Channel); -/** - * @} - */ - -/** @defgroup TIM_Exported_Functions_Group9 TIM Callbacks functions - * @brief TIM Callbacks functions - * @{ - */ -/* Callback in non blocking modes (Interrupt and DMA) *************************/ -void HAL_TIM_PeriodElapsedCallback(TIM_HandleTypeDef *htim); -void HAL_TIM_PeriodElapsedHalfCpltCallback(TIM_HandleTypeDef *htim); -void HAL_TIM_OC_DelayElapsedCallback(TIM_HandleTypeDef *htim); -void HAL_TIM_IC_CaptureCallback(TIM_HandleTypeDef *htim); -void HAL_TIM_IC_CaptureHalfCpltCallback(TIM_HandleTypeDef *htim); -void HAL_TIM_PWM_PulseFinishedCallback(TIM_HandleTypeDef *htim); -void HAL_TIM_PWM_PulseFinishedHalfCpltCallback(TIM_HandleTypeDef *htim); -void HAL_TIM_TriggerCallback(TIM_HandleTypeDef *htim); -void HAL_TIM_TriggerHalfCpltCallback(TIM_HandleTypeDef *htim); -void HAL_TIM_ErrorCallback(TIM_HandleTypeDef *htim); - -/* Callbacks Register/UnRegister functions ***********************************/ -#if (USE_HAL_TIM_REGISTER_CALLBACKS == 1) -HAL_StatusTypeDef HAL_TIM_RegisterCallback(TIM_HandleTypeDef *htim, HAL_TIM_CallbackIDTypeDef CallbackID, pTIM_CallbackTypeDef pCallback); -HAL_StatusTypeDef HAL_TIM_UnRegisterCallback(TIM_HandleTypeDef *htim, HAL_TIM_CallbackIDTypeDef CallbackID); -#endif /* USE_HAL_TIM_REGISTER_CALLBACKS */ - -/** - * @} - */ - -/** @defgroup TIM_Exported_Functions_Group10 TIM Peripheral State functions - * @brief Peripheral State functions - * @{ - */ -/* Peripheral State functions ************************************************/ -HAL_TIM_StateTypeDef HAL_TIM_Base_GetState(TIM_HandleTypeDef *htim); -HAL_TIM_StateTypeDef HAL_TIM_OC_GetState(TIM_HandleTypeDef *htim); -HAL_TIM_StateTypeDef HAL_TIM_PWM_GetState(TIM_HandleTypeDef *htim); -HAL_TIM_StateTypeDef HAL_TIM_IC_GetState(TIM_HandleTypeDef *htim); -HAL_TIM_StateTypeDef HAL_TIM_OnePulse_GetState(TIM_HandleTypeDef *htim); -HAL_TIM_StateTypeDef HAL_TIM_Encoder_GetState(TIM_HandleTypeDef *htim); -/** - * @} - */ - -/** - * @} - */ -/* End of exported functions -------------------------------------------------*/ - -/* Private functions----------------------------------------------------------*/ -/** @defgroup TIM_Private_Functions TIM Private Functions -* @{ -*/ -void TIM_Base_SetConfig(TIM_TypeDef *TIMx, TIM_Base_InitTypeDef *Structure); -void TIM_TI1_SetConfig(TIM_TypeDef *TIMx, uint32_t TIM_ICPolarity, uint32_t TIM_ICSelection, uint32_t TIM_ICFilter); -void TIM_OC2_SetConfig(TIM_TypeDef *TIMx, TIM_OC_InitTypeDef *OC_Config); -void TIM_ETR_SetConfig(TIM_TypeDef *TIMx, uint32_t TIM_ExtTRGPrescaler, - uint32_t TIM_ExtTRGPolarity, uint32_t ExtTRGFilter); - -void TIM_DMADelayPulseCplt(DMA_HandleTypeDef *hdma); -void TIM_DMADelayPulseHalfCplt(DMA_HandleTypeDef *hdma); -void TIM_DMAError(DMA_HandleTypeDef *hdma); -void TIM_DMACaptureCplt(DMA_HandleTypeDef *hdma); -void TIM_DMACaptureHalfCplt(DMA_HandleTypeDef *hdma); -void TIM_CCxChannelCmd(TIM_TypeDef *TIMx, uint32_t Channel, uint32_t ChannelState); - -#if (USE_HAL_TIM_REGISTER_CALLBACKS == 1) -void TIM_ResetCallback(TIM_HandleTypeDef *htim); -#endif /* USE_HAL_TIM_REGISTER_CALLBACKS */ - -/** -* @} -*/ -/* End of private functions --------------------------------------------------*/ - -/** - * @} - */ - -/** - * @} - */ - -#ifdef __cplusplus -} -#endif - -#endif /* STM32F7xx_HAL_TIM_H */ - -/************************ (C) COPYRIGHT STMicroelectronics *****END OF FILE****/ diff --git a/test_dma/Drivers/STM32F7xx_HAL_Driver/Inc/stm32f7xx_hal_tim_ex.h b/test_dma/Drivers/STM32F7xx_HAL_Driver/Inc/stm32f7xx_hal_tim_ex.h deleted file mode 100644 index 598f5c6..0000000 --- a/test_dma/Drivers/STM32F7xx_HAL_Driver/Inc/stm32f7xx_hal_tim_ex.h +++ /dev/null @@ -1,355 +0,0 @@ -/** - ****************************************************************************** - * @file stm32f7xx_hal_tim_ex.h - * @author MCD Application Team - * @brief Header file of TIM HAL Extended module. - ****************************************************************************** - * @attention - * - *

© Copyright (c) 2017 STMicroelectronics. - * All rights reserved.

- * - * This software component is licensed by ST under BSD 3-Clause license, - * the "License"; You may not use this file except in compliance with the - * License. You may obtain a copy of the License at: - * opensource.org/licenses/BSD-3-Clause - * - ****************************************************************************** - */ - -/* Define to prevent recursive inclusion -------------------------------------*/ -#ifndef STM32F7xx_HAL_TIM_EX_H -#define STM32F7xx_HAL_TIM_EX_H - -#ifdef __cplusplus -extern "C" { -#endif - -/* Includes ------------------------------------------------------------------*/ -#include "stm32f7xx_hal_def.h" - -/** @addtogroup STM32F7xx_HAL_Driver - * @{ - */ - -/** @addtogroup TIMEx - * @{ - */ - -/* Exported types ------------------------------------------------------------*/ -/** @defgroup TIMEx_Exported_Types TIM Extended Exported Types - * @{ - */ - -/** - * @brief TIM Hall sensor Configuration Structure definition - */ - -typedef struct -{ - uint32_t IC1Polarity; /*!< Specifies the active edge of the input signal. - This parameter can be a value of @ref TIM_Input_Capture_Polarity */ - - uint32_t IC1Prescaler; /*!< Specifies the Input Capture Prescaler. - This parameter can be a value of @ref TIM_Input_Capture_Prescaler */ - - uint32_t IC1Filter; /*!< Specifies the input capture filter. - This parameter can be a number between Min_Data = 0x0 and Max_Data = 0xF */ - - uint32_t Commutation_Delay; /*!< Specifies the pulse value to be loaded into the Capture Compare Register. - This parameter can be a number between Min_Data = 0x0000 and Max_Data = 0xFFFF */ -} TIM_HallSensor_InitTypeDef; -#if defined(TIM_BREAK_INPUT_SUPPORT) - -/** - * @brief TIM Break/Break2 input configuration - */ -typedef struct -{ - uint32_t Source; /*!< Specifies the source of the timer break input. - This parameter can be a value of @ref TIMEx_Break_Input_Source */ - uint32_t Enable; /*!< Specifies whether or not the break input source is enabled. - This parameter can be a value of @ref TIMEx_Break_Input_Source_Enable */ - uint32_t Polarity; /*!< Specifies the break input source polarity. - This parameter can be a value of @ref TIMEx_Break_Input_Source_Polarity - Not relevant when analog watchdog output of the DFSDM1 used as break input source */ -} -TIMEx_BreakInputConfigTypeDef; - -#endif /* TIM_BREAK_INPUT_SUPPORT */ -/** - * @} - */ -/* End of exported types -----------------------------------------------------*/ - -/* Exported constants --------------------------------------------------------*/ -/** @defgroup TIMEx_Exported_Constants TIM Extended Exported Constants - * @{ - */ - -/** @defgroup TIMEx_Remap TIM Extended Remapping - * @{ - */ -#define TIM_TIM2_TIM8_TRGO (0x00000000U) -#define TIM_TIM2_ETH_PTP (0x00000400U) -#define TIM_TIM2_USBFS_SOF (0x00000800U) -#define TIM_TIM2_USBHS_SOF (0x00000C00U) -#define TIM_TIM5_GPIO (0x00000000U) -#define TIM_TIM5_LSI (0x00000040U) -#define TIM_TIM5_LSE (0x00000080U) -#define TIM_TIM5_RTC (0x000000C0U) -#define TIM_TIM11_GPIO (0x00000000U) -#define TIM_TIM11_SPDIFRX (0x00000001U) -#define TIM_TIM11_HSE (0x00000002U) -#define TIM_TIM11_MCO1 (0x00000003U) -/** - * @} - */ -#if defined(TIM_BREAK_INPUT_SUPPORT) - -/** @defgroup TIMEx_Break_Input TIM Extended Break input - * @{ - */ -#define TIM_BREAKINPUT_BRK 0x00000001U /* !< Timer break input */ -#define TIM_BREAKINPUT_BRK2 0x00000002U /* !< Timer break2 input */ -/** - * @} - */ - -/** @defgroup TIMEx_Break_Input_Source TIM Extended Break input source - * @{ - */ -#define TIM_BREAKINPUTSOURCE_BKIN ((uint32_t)0x00000001U) /* !< An external source (GPIO) is connected to the BKIN pin */ -#define TIM_BREAKINPUTSOURCE_DFSDM1 ((uint32_t)0x00000008U) /* !< The analog watchdog output of the DFSDM1 peripheral is connected to the break input */ -/** - * @} - */ - -/** @defgroup TIMEx_Break_Input_Source_Enable TIM Extended Break input source enabling - * @{ - */ -#define TIM_BREAKINPUTSOURCE_DISABLE 0x00000000U /* !< Break input source is disabled */ -#define TIM_BREAKINPUTSOURCE_ENABLE 0x00000001U /* !< Break input source is enabled */ -/** - * @} - */ - -/** @defgroup TIMEx_Break_Input_Source_Polarity TIM Extended Break input polarity - * @{ - */ -#define TIM_BREAKINPUTSOURCE_POLARITY_LOW 0x00000001U /* !< Break input source is active low */ -#define TIM_BREAKINPUTSOURCE_POLARITY_HIGH 0x00000000U /* !< Break input source is active_high */ -/** - * @} - */ -#endif /* TIM_BREAK_INPUT_SUPPORT */ - -/** - * @} - */ -/* End of exported constants -------------------------------------------------*/ - -/* Exported macro ------------------------------------------------------------*/ -/** @defgroup TIMEx_Exported_Macros TIM Extended Exported Macros - * @{ - */ - -/** - * @} - */ -/* End of exported macro -----------------------------------------------------*/ - -/* Private macro -------------------------------------------------------------*/ -/** @defgroup TIMEx_Private_Macros TIM Extended Private Macros - * @{ - */ -#define IS_TIM_REMAP(__TIM_REMAP__) (((__TIM_REMAP__) == TIM_TIM2_TIM8_TRGO)||\ - ((__TIM_REMAP__) == TIM_TIM2_ETH_PTP) ||\ - ((__TIM_REMAP__) == TIM_TIM2_USBFS_SOF)||\ - ((__TIM_REMAP__) == TIM_TIM2_USBHS_SOF)||\ - ((__TIM_REMAP__) == TIM_TIM5_GPIO) ||\ - ((__TIM_REMAP__) == TIM_TIM5_LSI) ||\ - ((__TIM_REMAP__) == TIM_TIM5_LSE) ||\ - ((__TIM_REMAP__) == TIM_TIM5_RTC) ||\ - ((__TIM_REMAP__) == TIM_TIM11_GPIO) ||\ - ((__TIM_REMAP__) == TIM_TIM11_SPDIFRX) ||\ - ((__TIM_REMAP__) == TIM_TIM11_HSE) ||\ - ((__TIM_REMAP__) == TIM_TIM11_MCO1)) -#if defined(TIM_BREAK_INPUT_SUPPORT) - -#define IS_TIM_BREAKINPUT(__BREAKINPUT__) (((__BREAKINPUT__) == TIM_BREAKINPUT_BRK) || \ - ((__BREAKINPUT__) == TIM_BREAKINPUT_BRK2)) - -#define IS_TIM_BREAKINPUTSOURCE(__SOURCE__) (((__SOURCE__) == TIM_BREAKINPUTSOURCE_BKIN) || \ - ((__SOURCE__) == TIM_BREAKINPUTSOURCE_DFSDM)) - -#define IS_TIM_BREAKINPUTSOURCE_STATE(__STATE__) (((__STATE__) == TIM_BREAKINPUTSOURCE_DISABLE) || \ - ((__STATE__) == TIM_BREAKINPUTSOURCE_ENABLE)) - -#define IS_TIM_BREAKINPUTSOURCE_POLARITY(__POLARITY__) (((__POLARITY__) == TIM_BREAKINPUTSOURCE_POLARITY_LOW) || \ - ((__POLARITY__) == TIM_BREAKINPUTSOURCE_POLARITY_HIGH)) -#endif /* TIM_BREAK_INPUT_SUPPORT */ - -/** - * @} - */ -/* End of private macro ------------------------------------------------------*/ - -/* Exported functions --------------------------------------------------------*/ -/** @addtogroup TIMEx_Exported_Functions TIM Extended Exported Functions - * @{ - */ - -/** @addtogroup TIMEx_Exported_Functions_Group1 Extended Timer Hall Sensor functions - * @brief Timer Hall Sensor functions - * @{ - */ -/* Timer Hall Sensor functions **********************************************/ -HAL_StatusTypeDef HAL_TIMEx_HallSensor_Init(TIM_HandleTypeDef *htim, TIM_HallSensor_InitTypeDef *sConfig); -HAL_StatusTypeDef HAL_TIMEx_HallSensor_DeInit(TIM_HandleTypeDef *htim); - -void HAL_TIMEx_HallSensor_MspInit(TIM_HandleTypeDef *htim); -void HAL_TIMEx_HallSensor_MspDeInit(TIM_HandleTypeDef *htim); - -/* Blocking mode: Polling */ -HAL_StatusTypeDef HAL_TIMEx_HallSensor_Start(TIM_HandleTypeDef *htim); -HAL_StatusTypeDef HAL_TIMEx_HallSensor_Stop(TIM_HandleTypeDef *htim); -/* Non-Blocking mode: Interrupt */ -HAL_StatusTypeDef HAL_TIMEx_HallSensor_Start_IT(TIM_HandleTypeDef *htim); -HAL_StatusTypeDef HAL_TIMEx_HallSensor_Stop_IT(TIM_HandleTypeDef *htim); -/* Non-Blocking mode: DMA */ -HAL_StatusTypeDef HAL_TIMEx_HallSensor_Start_DMA(TIM_HandleTypeDef *htim, uint32_t *pData, uint16_t Length); -HAL_StatusTypeDef HAL_TIMEx_HallSensor_Stop_DMA(TIM_HandleTypeDef *htim); -/** - * @} - */ - -/** @addtogroup TIMEx_Exported_Functions_Group2 Extended Timer Complementary Output Compare functions - * @brief Timer Complementary Output Compare functions - * @{ - */ -/* Timer Complementary Output Compare functions *****************************/ -/* Blocking mode: Polling */ -HAL_StatusTypeDef HAL_TIMEx_OCN_Start(TIM_HandleTypeDef *htim, uint32_t Channel); -HAL_StatusTypeDef HAL_TIMEx_OCN_Stop(TIM_HandleTypeDef *htim, uint32_t Channel); - -/* Non-Blocking mode: Interrupt */ -HAL_StatusTypeDef HAL_TIMEx_OCN_Start_IT(TIM_HandleTypeDef *htim, uint32_t Channel); -HAL_StatusTypeDef HAL_TIMEx_OCN_Stop_IT(TIM_HandleTypeDef *htim, uint32_t Channel); - -/* Non-Blocking mode: DMA */ -HAL_StatusTypeDef HAL_TIMEx_OCN_Start_DMA(TIM_HandleTypeDef *htim, uint32_t Channel, uint32_t *pData, uint16_t Length); -HAL_StatusTypeDef HAL_TIMEx_OCN_Stop_DMA(TIM_HandleTypeDef *htim, uint32_t Channel); -/** - * @} - */ - -/** @addtogroup TIMEx_Exported_Functions_Group3 Extended Timer Complementary PWM functions - * @brief Timer Complementary PWM functions - * @{ - */ -/* Timer Complementary PWM functions ****************************************/ -/* Blocking mode: Polling */ -HAL_StatusTypeDef HAL_TIMEx_PWMN_Start(TIM_HandleTypeDef *htim, uint32_t Channel); -HAL_StatusTypeDef HAL_TIMEx_PWMN_Stop(TIM_HandleTypeDef *htim, uint32_t Channel); - -/* Non-Blocking mode: Interrupt */ -HAL_StatusTypeDef HAL_TIMEx_PWMN_Start_IT(TIM_HandleTypeDef *htim, uint32_t Channel); -HAL_StatusTypeDef HAL_TIMEx_PWMN_Stop_IT(TIM_HandleTypeDef *htim, uint32_t Channel); -/* Non-Blocking mode: DMA */ -HAL_StatusTypeDef HAL_TIMEx_PWMN_Start_DMA(TIM_HandleTypeDef *htim, uint32_t Channel, uint32_t *pData, uint16_t Length); -HAL_StatusTypeDef HAL_TIMEx_PWMN_Stop_DMA(TIM_HandleTypeDef *htim, uint32_t Channel); -/** - * @} - */ - -/** @addtogroup TIMEx_Exported_Functions_Group4 Extended Timer Complementary One Pulse functions - * @brief Timer Complementary One Pulse functions - * @{ - */ -/* Timer Complementary One Pulse functions **********************************/ -/* Blocking mode: Polling */ -HAL_StatusTypeDef HAL_TIMEx_OnePulseN_Start(TIM_HandleTypeDef *htim, uint32_t OutputChannel); -HAL_StatusTypeDef HAL_TIMEx_OnePulseN_Stop(TIM_HandleTypeDef *htim, uint32_t OutputChannel); - -/* Non-Blocking mode: Interrupt */ -HAL_StatusTypeDef HAL_TIMEx_OnePulseN_Start_IT(TIM_HandleTypeDef *htim, uint32_t OutputChannel); -HAL_StatusTypeDef HAL_TIMEx_OnePulseN_Stop_IT(TIM_HandleTypeDef *htim, uint32_t OutputChannel); -/** - * @} - */ - -/** @addtogroup TIMEx_Exported_Functions_Group5 Extended Peripheral Control functions - * @brief Peripheral Control functions - * @{ - */ -/* Extended Control functions ************************************************/ -HAL_StatusTypeDef HAL_TIMEx_ConfigCommutEvent(TIM_HandleTypeDef *htim, uint32_t InputTrigger, uint32_t CommutationSource); -HAL_StatusTypeDef HAL_TIMEx_ConfigCommutEvent_IT(TIM_HandleTypeDef *htim, uint32_t InputTrigger, uint32_t CommutationSource); -HAL_StatusTypeDef HAL_TIMEx_ConfigCommutEvent_DMA(TIM_HandleTypeDef *htim, uint32_t InputTrigger, uint32_t CommutationSource); -HAL_StatusTypeDef HAL_TIMEx_MasterConfigSynchronization(TIM_HandleTypeDef *htim, TIM_MasterConfigTypeDef *sMasterConfig); -HAL_StatusTypeDef HAL_TIMEx_ConfigBreakDeadTime(TIM_HandleTypeDef *htim, TIM_BreakDeadTimeConfigTypeDef *sBreakDeadTimeConfig); -#if defined(TIM_BREAK_INPUT_SUPPORT) -HAL_StatusTypeDef HAL_TIMEx_ConfigBreakInput(TIM_HandleTypeDef *htim, uint32_t BreakInput, TIMEx_BreakInputConfigTypeDef *sBreakInputConfig); -#endif /* TIM_BREAK_INPUT_SUPPORT */ -HAL_StatusTypeDef HAL_TIMEx_GroupChannel5(TIM_HandleTypeDef *htim, uint32_t Channels); -HAL_StatusTypeDef HAL_TIMEx_RemapConfig(TIM_HandleTypeDef *htim, uint32_t Remap); -/** - * @} - */ - -/** @addtogroup TIMEx_Exported_Functions_Group6 Extended Callbacks functions - * @brief Extended Callbacks functions - * @{ - */ -/* Extended Callback **********************************************************/ -void HAL_TIMEx_CommutCallback(TIM_HandleTypeDef *htim); -void HAL_TIMEx_CommutHalfCpltCallback(TIM_HandleTypeDef *htim); -void HAL_TIMEx_BreakCallback(TIM_HandleTypeDef *htim); -void HAL_TIMEx_Break2Callback(TIM_HandleTypeDef *htim); -/** - * @} - */ - -/** @addtogroup TIMEx_Exported_Functions_Group7 Extended Peripheral State functions - * @brief Extended Peripheral State functions - * @{ - */ -/* Extended Peripheral State functions ***************************************/ -HAL_TIM_StateTypeDef HAL_TIMEx_HallSensor_GetState(TIM_HandleTypeDef *htim); -/** - * @} - */ - -/** - * @} - */ -/* End of exported functions -------------------------------------------------*/ - -/* Private functions----------------------------------------------------------*/ -/** @defgroup TIMEx_Private_Functions TIM Extended Private Functions - * @{ - */ -void TIMEx_DMACommutationCplt(DMA_HandleTypeDef *hdma); -void TIMEx_DMACommutationHalfCplt(DMA_HandleTypeDef *hdma); -/** - * @} - */ -/* End of private functions --------------------------------------------------*/ - -/** - * @} - */ - -/** - * @} - */ - -#ifdef __cplusplus -} -#endif - - -#endif /* STM32F7xx_HAL_TIM_EX_H */ - -/************************ (C) COPYRIGHT STMicroelectronics *****END OF FILE****/ diff --git a/test_dma/Drivers/STM32F7xx_HAL_Driver/Inc/stm32f7xx_hal_uart.h b/test_dma/Drivers/STM32F7xx_HAL_Driver/Inc/stm32f7xx_hal_uart.h deleted file mode 100644 index 4209206..0000000 --- a/test_dma/Drivers/STM32F7xx_HAL_Driver/Inc/stm32f7xx_hal_uart.h +++ /dev/null @@ -1,1429 +0,0 @@ -/** - ****************************************************************************** - * @file stm32f7xx_hal_uart.h - * @author MCD Application Team - * @brief Header file of UART HAL module. - ****************************************************************************** - * @attention - * - *

© Copyright (c) 2017 STMicroelectronics. - * All rights reserved.

- * - * This software component is licensed by ST under BSD 3-Clause license, - * the "License"; You may not use this file except in compliance with the - * License. You may obtain a copy of the License at: - * opensource.org/licenses/BSD-3-Clause - * - ****************************************************************************** - */ - -/* Define to prevent recursive inclusion -------------------------------------*/ -#ifndef STM32F7xx_HAL_UART_H -#define STM32F7xx_HAL_UART_H - -#ifdef __cplusplus -extern "C" { -#endif - -/* Includes ------------------------------------------------------------------*/ -#include "stm32f7xx_hal_def.h" - -/** @addtogroup STM32F7xx_HAL_Driver - * @{ - */ - -/** @addtogroup UART - * @{ - */ - -/* Exported types ------------------------------------------------------------*/ -/** @defgroup UART_Exported_Types UART Exported Types - * @{ - */ - -/** - * @brief UART Init Structure definition - */ -typedef struct -{ - uint32_t BaudRate; /*!< This member configures the UART communication baud rate. - The baud rate register is computed using the following formula: - - If oversampling is 16 or in LIN mode, - Baud Rate Register = ((uart_ker_ck) / ((huart->Init.BaudRate))) - - If oversampling is 8, - Baud Rate Register[15:4] = ((2 * uart_ker_ck) / ((huart->Init.BaudRate)))[15:4] - Baud Rate Register[3] = 0 - Baud Rate Register[2:0] = (((2 * uart_ker_ck) / ((huart->Init.BaudRate)))[3:0]) >> 1 - where uart_ker_ck is the UART input clock */ - - uint32_t WordLength; /*!< Specifies the number of data bits transmitted or received in a frame. - This parameter can be a value of @ref UARTEx_Word_Length. */ - - uint32_t StopBits; /*!< Specifies the number of stop bits transmitted. - This parameter can be a value of @ref UART_Stop_Bits. */ - - uint32_t Parity; /*!< Specifies the parity mode. - This parameter can be a value of @ref UART_Parity - @note When parity is enabled, the computed parity is inserted - at the MSB position of the transmitted data (9th bit when - the word length is set to 9 data bits; 8th bit when the - word length is set to 8 data bits). */ - - uint32_t Mode; /*!< Specifies whether the Receive or Transmit mode is enabled or disabled. - This parameter can be a value of @ref UART_Mode. */ - - uint32_t HwFlowCtl; /*!< Specifies whether the hardware flow control mode is enabled - or disabled. - This parameter can be a value of @ref UART_Hardware_Flow_Control. */ - - uint32_t OverSampling; /*!< Specifies whether the Over sampling 8 is enabled or disabled, to achieve higher speed (up to f_PCLK/8). - This parameter can be a value of @ref UART_Over_Sampling. */ - - uint32_t OneBitSampling; /*!< Specifies whether a single sample or three samples' majority vote is selected. - Selecting the single sample method increases the receiver tolerance to clock - deviations. This parameter can be a value of @ref UART_OneBit_Sampling. */ - - -} UART_InitTypeDef; - -/** - * @brief UART Advanced Features initialization structure definition - */ -typedef struct -{ - uint32_t AdvFeatureInit; /*!< Specifies which advanced UART features is initialized. Several - Advanced Features may be initialized at the same time . - This parameter can be a value of @ref UART_Advanced_Features_Initialization_Type. */ - - uint32_t TxPinLevelInvert; /*!< Specifies whether the TX pin active level is inverted. - This parameter can be a value of @ref UART_Tx_Inv. */ - - uint32_t RxPinLevelInvert; /*!< Specifies whether the RX pin active level is inverted. - This parameter can be a value of @ref UART_Rx_Inv. */ - - uint32_t DataInvert; /*!< Specifies whether data are inverted (positive/direct logic - vs negative/inverted logic). - This parameter can be a value of @ref UART_Data_Inv. */ - - uint32_t Swap; /*!< Specifies whether TX and RX pins are swapped. - This parameter can be a value of @ref UART_Rx_Tx_Swap. */ - - uint32_t OverrunDisable; /*!< Specifies whether the reception overrun detection is disabled. - This parameter can be a value of @ref UART_Overrun_Disable. */ - - uint32_t DMADisableonRxError; /*!< Specifies whether the DMA is disabled in case of reception error. - This parameter can be a value of @ref UART_DMA_Disable_on_Rx_Error. */ - - uint32_t AutoBaudRateEnable; /*!< Specifies whether auto Baud rate detection is enabled. - This parameter can be a value of @ref UART_AutoBaudRate_Enable. */ - - uint32_t AutoBaudRateMode; /*!< If auto Baud rate detection is enabled, specifies how the rate - detection is carried out. - This parameter can be a value of @ref UART_AutoBaud_Rate_Mode. */ - - uint32_t MSBFirst; /*!< Specifies whether MSB is sent first on UART line. - This parameter can be a value of @ref UART_MSB_First. */ -} UART_AdvFeatureInitTypeDef; - - - -/** - * @brief HAL UART State definition - * @note HAL UART State value is a combination of 2 different substates: gState and RxState (see @ref UART_State_Definition). - * - gState contains UART state information related to global Handle management - * and also information related to Tx operations. - * gState value coding follow below described bitmap : - * b7-b6 Error information - * 00 : No Error - * 01 : (Not Used) - * 10 : Timeout - * 11 : Error - * b5 Peripheral initialization status - * 0 : Reset (Peripheral not initialized) - * 1 : Init done (Peripheral not initialized. HAL UART Init function already called) - * b4-b3 (not used) - * xx : Should be set to 00 - * b2 Intrinsic process state - * 0 : Ready - * 1 : Busy (Peripheral busy with some configuration or internal operations) - * b1 (not used) - * x : Should be set to 0 - * b0 Tx state - * 0 : Ready (no Tx operation ongoing) - * 1 : Busy (Tx operation ongoing) - * - RxState contains information related to Rx operations. - * RxState value coding follow below described bitmap : - * b7-b6 (not used) - * xx : Should be set to 00 - * b5 Peripheral initialization status - * 0 : Reset (Peripheral not initialized) - * 1 : Init done (Peripheral not initialized) - * b4-b2 (not used) - * xxx : Should be set to 000 - * b1 Rx state - * 0 : Ready (no Rx operation ongoing) - * 1 : Busy (Rx operation ongoing) - * b0 (not used) - * x : Should be set to 0. - */ -typedef uint32_t HAL_UART_StateTypeDef; - -/** - * @brief UART clock sources definition - */ -typedef enum -{ - UART_CLOCKSOURCE_PCLK1 = 0x00U, /*!< PCLK1 clock source */ - UART_CLOCKSOURCE_PCLK2 = 0x01U, /*!< PCLK2 clock source */ - UART_CLOCKSOURCE_HSI = 0x02U, /*!< HSI clock source */ - UART_CLOCKSOURCE_SYSCLK = 0x04U, /*!< SYSCLK clock source */ - UART_CLOCKSOURCE_LSE = 0x08U, /*!< LSE clock source */ - UART_CLOCKSOURCE_UNDEFINED = 0x10U /*!< Undefined clock source */ -} UART_ClockSourceTypeDef; - -/** - * @brief UART handle Structure definition - */ -typedef struct __UART_HandleTypeDef -{ - USART_TypeDef *Instance; /*!< UART registers base address */ - - UART_InitTypeDef Init; /*!< UART communication parameters */ - - UART_AdvFeatureInitTypeDef AdvancedInit; /*!< UART Advanced Features initialization parameters */ - - uint8_t *pTxBuffPtr; /*!< Pointer to UART Tx transfer Buffer */ - - uint16_t TxXferSize; /*!< UART Tx Transfer size */ - - __IO uint16_t TxXferCount; /*!< UART Tx Transfer Counter */ - - uint8_t *pRxBuffPtr; /*!< Pointer to UART Rx transfer Buffer */ - - uint16_t RxXferSize; /*!< UART Rx Transfer size */ - - __IO uint16_t RxXferCount; /*!< UART Rx Transfer Counter */ - - uint16_t Mask; /*!< UART Rx RDR register mask */ - - - void (*RxISR)(struct __UART_HandleTypeDef *huart); /*!< Function pointer on Rx IRQ handler */ - - void (*TxISR)(struct __UART_HandleTypeDef *huart); /*!< Function pointer on Tx IRQ handler */ - - DMA_HandleTypeDef *hdmatx; /*!< UART Tx DMA Handle parameters */ - - DMA_HandleTypeDef *hdmarx; /*!< UART Rx DMA Handle parameters */ - - HAL_LockTypeDef Lock; /*!< Locking object */ - - __IO HAL_UART_StateTypeDef gState; /*!< UART state information related to global Handle management - and also related to Tx operations. - This parameter can be a value of @ref HAL_UART_StateTypeDef */ - - __IO HAL_UART_StateTypeDef RxState; /*!< UART state information related to Rx operations. - This parameter can be a value of @ref HAL_UART_StateTypeDef */ - - __IO uint32_t ErrorCode; /*!< UART Error code */ - -#if (USE_HAL_UART_REGISTER_CALLBACKS == 1) - void (* TxHalfCpltCallback)(struct __UART_HandleTypeDef *huart); /*!< UART Tx Half Complete Callback */ - void (* TxCpltCallback)(struct __UART_HandleTypeDef *huart); /*!< UART Tx Complete Callback */ - void (* RxHalfCpltCallback)(struct __UART_HandleTypeDef *huart); /*!< UART Rx Half Complete Callback */ - void (* RxCpltCallback)(struct __UART_HandleTypeDef *huart); /*!< UART Rx Complete Callback */ - void (* ErrorCallback)(struct __UART_HandleTypeDef *huart); /*!< UART Error Callback */ - void (* AbortCpltCallback)(struct __UART_HandleTypeDef *huart); /*!< UART Abort Complete Callback */ - void (* AbortTransmitCpltCallback)(struct __UART_HandleTypeDef *huart); /*!< UART Abort Transmit Complete Callback */ - void (* AbortReceiveCpltCallback)(struct __UART_HandleTypeDef *huart); /*!< UART Abort Receive Complete Callback */ - void (* WakeupCallback)(struct __UART_HandleTypeDef *huart); /*!< UART Wakeup Callback */ - - void (* MspInitCallback)(struct __UART_HandleTypeDef *huart); /*!< UART Msp Init callback */ - void (* MspDeInitCallback)(struct __UART_HandleTypeDef *huart); /*!< UART Msp DeInit callback */ -#endif /* USE_HAL_UART_REGISTER_CALLBACKS */ - -} UART_HandleTypeDef; - -#if (USE_HAL_UART_REGISTER_CALLBACKS == 1) -/** - * @brief HAL UART Callback ID enumeration definition - */ -typedef enum -{ - HAL_UART_TX_HALFCOMPLETE_CB_ID = 0x00U, /*!< UART Tx Half Complete Callback ID */ - HAL_UART_TX_COMPLETE_CB_ID = 0x01U, /*!< UART Tx Complete Callback ID */ - HAL_UART_RX_HALFCOMPLETE_CB_ID = 0x02U, /*!< UART Rx Half Complete Callback ID */ - HAL_UART_RX_COMPLETE_CB_ID = 0x03U, /*!< UART Rx Complete Callback ID */ - HAL_UART_ERROR_CB_ID = 0x04U, /*!< UART Error Callback ID */ - HAL_UART_ABORT_COMPLETE_CB_ID = 0x05U, /*!< UART Abort Complete Callback ID */ - HAL_UART_ABORT_TRANSMIT_COMPLETE_CB_ID = 0x06U, /*!< UART Abort Transmit Complete Callback ID */ - HAL_UART_ABORT_RECEIVE_COMPLETE_CB_ID = 0x07U, /*!< UART Abort Receive Complete Callback ID */ - HAL_UART_WAKEUP_CB_ID = 0x08U, /*!< UART Wakeup Callback ID */ - - HAL_UART_MSPINIT_CB_ID = 0x0BU, /*!< UART MspInit callback ID */ - HAL_UART_MSPDEINIT_CB_ID = 0x0CU /*!< UART MspDeInit callback ID */ - -} HAL_UART_CallbackIDTypeDef; - -/** - * @brief HAL UART Callback pointer definition - */ -typedef void (*pUART_CallbackTypeDef)(UART_HandleTypeDef *huart); /*!< pointer to an UART callback function */ - -#endif /* USE_HAL_UART_REGISTER_CALLBACKS */ - -/** - * @} - */ - -/* Exported constants --------------------------------------------------------*/ -/** @defgroup UART_Exported_Constants UART Exported Constants - * @{ - */ - -/** @defgroup UART_State_Definition UART State Code Definition - * @{ - */ -#define HAL_UART_STATE_RESET 0x00000000U /*!< Peripheral is not initialized - Value is allowed for gState and RxState */ -#define HAL_UART_STATE_READY 0x00000020U /*!< Peripheral Initialized and ready for use - Value is allowed for gState and RxState */ -#define HAL_UART_STATE_BUSY 0x00000024U /*!< an internal process is ongoing - Value is allowed for gState only */ -#define HAL_UART_STATE_BUSY_TX 0x00000021U /*!< Data Transmission process is ongoing - Value is allowed for gState only */ -#define HAL_UART_STATE_BUSY_RX 0x00000022U /*!< Data Reception process is ongoing - Value is allowed for RxState only */ -#define HAL_UART_STATE_BUSY_TX_RX 0x00000023U /*!< Data Transmission and Reception process is ongoing - Not to be used for neither gState nor RxState. - Value is result of combination (Or) between gState and RxState values */ -#define HAL_UART_STATE_TIMEOUT 0x000000A0U /*!< Timeout state - Value is allowed for gState only */ -#define HAL_UART_STATE_ERROR 0x000000E0U /*!< Error - Value is allowed for gState only */ -/** - * @} - */ - -/** @defgroup UART_Error_Definition UART Error Definition - * @{ - */ -#define HAL_UART_ERROR_NONE ((uint32_t)0x00000000U) /*!< No error */ -#define HAL_UART_ERROR_PE ((uint32_t)0x00000001U) /*!< Parity error */ -#define HAL_UART_ERROR_NE ((uint32_t)0x00000002U) /*!< Noise error */ -#define HAL_UART_ERROR_FE ((uint32_t)0x00000004U) /*!< Frame error */ -#define HAL_UART_ERROR_ORE ((uint32_t)0x00000008U) /*!< Overrun error */ -#define HAL_UART_ERROR_DMA ((uint32_t)0x00000010U) /*!< DMA transfer error */ -#if (USE_HAL_UART_REGISTER_CALLBACKS == 1) -#define HAL_UART_ERROR_INVALID_CALLBACK ((uint32_t)0x00000020U) /*!< Invalid Callback error */ -#endif /* USE_HAL_UART_REGISTER_CALLBACKS */ -/** - * @} - */ - -/** @defgroup UART_Stop_Bits UART Number of Stop Bits - * @{ - */ -#define UART_STOPBITS_0_5 USART_CR2_STOP_0 /*!< UART frame with 0.5 stop bit */ -#define UART_STOPBITS_1 0x00000000U /*!< UART frame with 1 stop bit */ -#define UART_STOPBITS_1_5 (USART_CR2_STOP_0 | USART_CR2_STOP_1) /*!< UART frame with 1.5 stop bits */ -#define UART_STOPBITS_2 USART_CR2_STOP_1 /*!< UART frame with 2 stop bits */ -/** - * @} - */ - -/** @defgroup UART_Parity UART Parity - * @{ - */ -#define UART_PARITY_NONE 0x00000000U /*!< No parity */ -#define UART_PARITY_EVEN USART_CR1_PCE /*!< Even parity */ -#define UART_PARITY_ODD (USART_CR1_PCE | USART_CR1_PS) /*!< Odd parity */ -/** - * @} - */ - -/** @defgroup UART_Hardware_Flow_Control UART Hardware Flow Control - * @{ - */ -#define UART_HWCONTROL_NONE 0x00000000U /*!< No hardware control */ -#define UART_HWCONTROL_RTS USART_CR3_RTSE /*!< Request To Send */ -#define UART_HWCONTROL_CTS USART_CR3_CTSE /*!< Clear To Send */ -#define UART_HWCONTROL_RTS_CTS (USART_CR3_RTSE | USART_CR3_CTSE) /*!< Request and Clear To Send */ -/** - * @} - */ - -/** @defgroup UART_Mode UART Transfer Mode - * @{ - */ -#define UART_MODE_RX USART_CR1_RE /*!< RX mode */ -#define UART_MODE_TX USART_CR1_TE /*!< TX mode */ -#define UART_MODE_TX_RX (USART_CR1_TE |USART_CR1_RE) /*!< RX and TX mode */ -/** - * @} - */ - -/** @defgroup UART_State UART State - * @{ - */ -#define UART_STATE_DISABLE 0x00000000U /*!< UART disabled */ -#define UART_STATE_ENABLE USART_CR1_UE /*!< UART enabled */ -/** - * @} - */ - -/** @defgroup UART_Over_Sampling UART Over Sampling - * @{ - */ -#define UART_OVERSAMPLING_16 0x00000000U /*!< Oversampling by 16 */ -#define UART_OVERSAMPLING_8 USART_CR1_OVER8 /*!< Oversampling by 8 */ -/** - * @} - */ - -/** @defgroup UART_OneBit_Sampling UART One Bit Sampling Method - * @{ - */ -#define UART_ONE_BIT_SAMPLE_DISABLE 0x00000000U /*!< One-bit sampling disable */ -#define UART_ONE_BIT_SAMPLE_ENABLE USART_CR3_ONEBIT /*!< One-bit sampling enable */ -/** - * @} - */ - -/** @defgroup UART_AutoBaud_Rate_Mode UART Advanced Feature AutoBaud Rate Mode - * @{ - */ -#define UART_ADVFEATURE_AUTOBAUDRATE_ONSTARTBIT 0x00000000U /*!< Auto Baud rate detection on start bit */ -#define UART_ADVFEATURE_AUTOBAUDRATE_ONFALLINGEDGE USART_CR2_ABRMODE_0 /*!< Auto Baud rate detection on falling edge */ -#define UART_ADVFEATURE_AUTOBAUDRATE_ON0X7FFRAME USART_CR2_ABRMODE_1 /*!< Auto Baud rate detection on 0x7F frame detection */ -#define UART_ADVFEATURE_AUTOBAUDRATE_ON0X55FRAME USART_CR2_ABRMODE /*!< Auto Baud rate detection on 0x55 frame detection */ -/** - * @} - */ - -/** @defgroup UART_Receiver_TimeOut UART Receiver TimeOut - * @{ - */ -#define UART_RECEIVER_TIMEOUT_DISABLE 0x00000000U /*!< UART receiver timeout disable */ -#define UART_RECEIVER_TIMEOUT_ENABLE USART_CR2_RTOEN /*!< UART receiver timeout enable */ -/** - * @} - */ - -/** @defgroup UART_LIN UART Local Interconnection Network mode - * @{ - */ -#define UART_LIN_DISABLE 0x00000000U /*!< Local Interconnect Network disable */ -#define UART_LIN_ENABLE USART_CR2_LINEN /*!< Local Interconnect Network enable */ -/** - * @} - */ - -/** @defgroup UART_LIN_Break_Detection UART LIN Break Detection - * @{ - */ -#define UART_LINBREAKDETECTLENGTH_10B 0x00000000U /*!< LIN 10-bit break detection length */ -#define UART_LINBREAKDETECTLENGTH_11B USART_CR2_LBDL /*!< LIN 11-bit break detection length */ -/** - * @} - */ - -/** @defgroup UART_DMA_Tx UART DMA Tx - * @{ - */ -#define UART_DMA_TX_DISABLE 0x00000000U /*!< UART DMA TX disabled */ -#define UART_DMA_TX_ENABLE USART_CR3_DMAT /*!< UART DMA TX enabled */ -/** - * @} - */ - -/** @defgroup UART_DMA_Rx UART DMA Rx - * @{ - */ -#define UART_DMA_RX_DISABLE 0x00000000U /*!< UART DMA RX disabled */ -#define UART_DMA_RX_ENABLE USART_CR3_DMAR /*!< UART DMA RX enabled */ -/** - * @} - */ - -/** @defgroup UART_Half_Duplex_Selection UART Half Duplex Selection - * @{ - */ -#define UART_HALF_DUPLEX_DISABLE 0x00000000U /*!< UART half-duplex disabled */ -#define UART_HALF_DUPLEX_ENABLE USART_CR3_HDSEL /*!< UART half-duplex enabled */ -/** - * @} - */ - -/** @defgroup UART_WakeUp_Methods UART WakeUp Methods - * @{ - */ -#define UART_WAKEUPMETHOD_IDLELINE 0x00000000U /*!< UART wake-up on idle line */ -#define UART_WAKEUPMETHOD_ADDRESSMARK USART_CR1_WAKE /*!< UART wake-up on address mark */ -/** - * @} - */ - -/** @defgroup UART_Request_Parameters UART Request Parameters - * @{ - */ -#define UART_AUTOBAUD_REQUEST USART_RQR_ABRRQ /*!< Auto-Baud Rate Request */ -#define UART_SENDBREAK_REQUEST USART_RQR_SBKRQ /*!< Send Break Request */ -#define UART_MUTE_MODE_REQUEST USART_RQR_MMRQ /*!< Mute Mode Request */ -#define UART_RXDATA_FLUSH_REQUEST USART_RQR_RXFRQ /*!< Receive Data flush Request */ -#define UART_TXDATA_FLUSH_REQUEST USART_RQR_TXFRQ /*!< Transmit data flush Request */ -/** - * @} - */ - -/** @defgroup UART_Advanced_Features_Initialization_Type UART Advanced Feature Initialization Type - * @{ - */ -#define UART_ADVFEATURE_NO_INIT 0x00000000U /*!< No advanced feature initialization */ -#define UART_ADVFEATURE_TXINVERT_INIT 0x00000001U /*!< TX pin active level inversion */ -#define UART_ADVFEATURE_RXINVERT_INIT 0x00000002U /*!< RX pin active level inversion */ -#define UART_ADVFEATURE_DATAINVERT_INIT 0x00000004U /*!< Binary data inversion */ -#define UART_ADVFEATURE_SWAP_INIT 0x00000008U /*!< TX/RX pins swap */ -#define UART_ADVFEATURE_RXOVERRUNDISABLE_INIT 0x00000010U /*!< RX overrun disable */ -#define UART_ADVFEATURE_DMADISABLEONERROR_INIT 0x00000020U /*!< DMA disable on Reception Error */ -#define UART_ADVFEATURE_AUTOBAUDRATE_INIT 0x00000040U /*!< Auto Baud rate detection initialization */ -#define UART_ADVFEATURE_MSBFIRST_INIT 0x00000080U /*!< Most significant bit sent/received first */ -/** - * @} - */ - -/** @defgroup UART_Tx_Inv UART Advanced Feature TX Pin Active Level Inversion - * @{ - */ -#define UART_ADVFEATURE_TXINV_DISABLE 0x00000000U /*!< TX pin active level inversion disable */ -#define UART_ADVFEATURE_TXINV_ENABLE USART_CR2_TXINV /*!< TX pin active level inversion enable */ -/** - * @} - */ - -/** @defgroup UART_Rx_Inv UART Advanced Feature RX Pin Active Level Inversion - * @{ - */ -#define UART_ADVFEATURE_RXINV_DISABLE 0x00000000U /*!< RX pin active level inversion disable */ -#define UART_ADVFEATURE_RXINV_ENABLE USART_CR2_RXINV /*!< RX pin active level inversion enable */ -/** - * @} - */ - -/** @defgroup UART_Data_Inv UART Advanced Feature Binary Data Inversion - * @{ - */ -#define UART_ADVFEATURE_DATAINV_DISABLE 0x00000000U /*!< Binary data inversion disable */ -#define UART_ADVFEATURE_DATAINV_ENABLE USART_CR2_DATAINV /*!< Binary data inversion enable */ -/** - * @} - */ - -/** @defgroup UART_Rx_Tx_Swap UART Advanced Feature RX TX Pins Swap - * @{ - */ -#define UART_ADVFEATURE_SWAP_DISABLE 0x00000000U /*!< TX/RX pins swap disable */ -#define UART_ADVFEATURE_SWAP_ENABLE USART_CR2_SWAP /*!< TX/RX pins swap enable */ -/** - * @} - */ - -/** @defgroup UART_Overrun_Disable UART Advanced Feature Overrun Disable - * @{ - */ -#define UART_ADVFEATURE_OVERRUN_ENABLE 0x00000000U /*!< RX overrun enable */ -#define UART_ADVFEATURE_OVERRUN_DISABLE USART_CR3_OVRDIS /*!< RX overrun disable */ -/** - * @} - */ - -/** @defgroup UART_AutoBaudRate_Enable UART Advanced Feature Auto BaudRate Enable - * @{ - */ -#define UART_ADVFEATURE_AUTOBAUDRATE_DISABLE 0x00000000U /*!< RX Auto Baud rate detection enable */ -#define UART_ADVFEATURE_AUTOBAUDRATE_ENABLE USART_CR2_ABREN /*!< RX Auto Baud rate detection disable */ -/** - * @} - */ - -/** @defgroup UART_DMA_Disable_on_Rx_Error UART Advanced Feature DMA Disable On Rx Error - * @{ - */ -#define UART_ADVFEATURE_DMA_ENABLEONRXERROR 0x00000000U /*!< DMA enable on Reception Error */ -#define UART_ADVFEATURE_DMA_DISABLEONRXERROR USART_CR3_DDRE /*!< DMA disable on Reception Error */ -/** - * @} - */ - -/** @defgroup UART_MSB_First UART Advanced Feature MSB First - * @{ - */ -#define UART_ADVFEATURE_MSBFIRST_DISABLE 0x00000000U /*!< Most significant bit sent/received first disable */ -#define UART_ADVFEATURE_MSBFIRST_ENABLE USART_CR2_MSBFIRST /*!< Most significant bit sent/received first enable */ -/** - * @} - */ - -/** @defgroup UART_Mute_Mode UART Advanced Feature Mute Mode Enable - * @{ - */ -#define UART_ADVFEATURE_MUTEMODE_DISABLE 0x00000000U /*!< UART mute mode disable */ -#define UART_ADVFEATURE_MUTEMODE_ENABLE USART_CR1_MME /*!< UART mute mode enable */ -/** - * @} - */ - -/** @defgroup UART_CR2_ADDRESS_LSB_POS UART Address-matching LSB Position In CR2 Register - * @{ - */ -#define UART_CR2_ADDRESS_LSB_POS 24U /*!< UART address-matching LSB position in CR2 register */ -/** - * @} - */ - -/** @defgroup UART_DriverEnable_Polarity UART DriverEnable Polarity - * @{ - */ -#define UART_DE_POLARITY_HIGH 0x00000000U /*!< Driver enable signal is active high */ -#define UART_DE_POLARITY_LOW USART_CR3_DEP /*!< Driver enable signal is active low */ -/** - * @} - */ - -/** @defgroup UART_CR1_DEAT_ADDRESS_LSB_POS UART Driver Enable Assertion Time LSB Position In CR1 Register - * @{ - */ -#define UART_CR1_DEAT_ADDRESS_LSB_POS 21U /*!< UART Driver Enable assertion time LSB position in CR1 register */ -/** - * @} - */ - -/** @defgroup UART_CR1_DEDT_ADDRESS_LSB_POS UART Driver Enable DeAssertion Time LSB Position In CR1 Register - * @{ - */ -#define UART_CR1_DEDT_ADDRESS_LSB_POS 16U /*!< UART Driver Enable de-assertion time LSB position in CR1 register */ -/** - * @} - */ - -/** @defgroup UART_Interruption_Mask UART Interruptions Flag Mask - * @{ - */ -#define UART_IT_MASK 0x001FU /*!< UART interruptions flags mask */ -/** - * @} - */ - -/** @defgroup UART_TimeOut_Value UART polling-based communications time-out value - * @{ - */ -#define HAL_UART_TIMEOUT_VALUE 0x1FFFFFFU /*!< UART polling-based communications time-out value */ -/** - * @} - */ - -/** @defgroup UART_Flags UART Status Flags - * Elements values convention: 0xXXXX - * - 0xXXXX : Flag mask in the ISR register - * @{ - */ -#define UART_FLAG_TEACK USART_ISR_TEACK /*!< UART transmit enable acknowledge flag */ -#define UART_FLAG_RWU USART_ISR_RWU /*!< UART receiver wake-up from mute mode flag */ -#define UART_FLAG_SBKF USART_ISR_SBKF /*!< UART send break flag */ -#define UART_FLAG_CMF USART_ISR_CMF /*!< UART character match flag */ -#define UART_FLAG_BUSY USART_ISR_BUSY /*!< UART busy flag */ -#define UART_FLAG_ABRF USART_ISR_ABRF /*!< UART auto Baud rate flag */ -#define UART_FLAG_ABRE USART_ISR_ABRE /*!< UART auto Baud rate error */ -#define UART_FLAG_CTS USART_ISR_CTS /*!< UART clear to send flag */ -#define UART_FLAG_CTSIF USART_ISR_CTSIF /*!< UART clear to send interrupt flag */ -#define UART_FLAG_LBDF USART_ISR_LBDF /*!< UART LIN break detection flag */ -#define UART_FLAG_TXE USART_ISR_TXE /*!< UART transmit data register empty */ -#define UART_FLAG_TC USART_ISR_TC /*!< UART transmission complete */ -#define UART_FLAG_RXNE USART_ISR_RXNE /*!< UART read data register not empty */ -#define UART_FLAG_IDLE USART_ISR_IDLE /*!< UART idle flag */ -#define UART_FLAG_ORE USART_ISR_ORE /*!< UART overrun error */ -#define UART_FLAG_NE USART_ISR_NE /*!< UART noise error */ -#define UART_FLAG_FE USART_ISR_FE /*!< UART frame error */ -#define UART_FLAG_PE USART_ISR_PE /*!< UART parity error */ -/** - * @} - */ - -/** @defgroup UART_Interrupt_definition UART Interrupts Definition - * Elements values convention: 000ZZZZZ0XXYYYYYb - * - YYYYY : Interrupt source position in the XX register (5bits) - * - XX : Interrupt source register (2bits) - * - 01: CR1 register - * - 10: CR2 register - * - 11: CR3 register - * - ZZZZZ : Flag position in the ISR register(5bits) - * Elements values convention: 000000000XXYYYYYb - * - YYYYY : Interrupt source position in the XX register (5bits) - * - XX : Interrupt source register (2bits) - * - 01: CR1 register - * - 10: CR2 register - * - 11: CR3 register - * Elements values convention: 0000ZZZZ00000000b - * - ZZZZ : Flag position in the ISR register(4bits) - * @{ - */ -#define UART_IT_PE 0x0028U /*!< UART parity error interruption */ -#define UART_IT_TXE 0x0727U /*!< UART transmit data register empty interruption */ -#define UART_IT_TC 0x0626U /*!< UART transmission complete interruption */ -#define UART_IT_RXNE 0x0525U /*!< UART read data register not empty interruption */ -#define UART_IT_IDLE 0x0424U /*!< UART idle interruption */ -#define UART_IT_LBD 0x0846U /*!< UART LIN break detection interruption */ -#define UART_IT_CTS 0x096AU /*!< UART CTS interruption */ -#define UART_IT_CM 0x112EU /*!< UART character match interruption */ - -#define UART_IT_ERR 0x0060U /*!< UART error interruption */ - -#define UART_IT_ORE 0x0300U /*!< UART overrun error interruption */ -#define UART_IT_NE 0x0200U /*!< UART noise error interruption */ -#define UART_IT_FE 0x0100U /*!< UART frame error interruption */ -/** - * @} - */ - -/** @defgroup UART_IT_CLEAR_Flags UART Interruption Clear Flags - * @{ - */ -#define UART_CLEAR_PEF USART_ICR_PECF /*!< Parity Error Clear Flag */ -#define UART_CLEAR_FEF USART_ICR_FECF /*!< Framing Error Clear Flag */ -#define UART_CLEAR_NEF USART_ICR_NCF /*!< Noise Error detected Clear Flag */ -#define UART_CLEAR_OREF USART_ICR_ORECF /*!< Overrun Error Clear Flag */ -#define UART_CLEAR_IDLEF USART_ICR_IDLECF /*!< IDLE line detected Clear Flag */ -#define UART_CLEAR_TCF USART_ICR_TCCF /*!< Transmission Complete Clear Flag */ -#define UART_CLEAR_LBDF USART_ICR_LBDCF /*!< LIN Break Detection Clear Flag */ -#define UART_CLEAR_CTSF USART_ICR_CTSCF /*!< CTS Interrupt Clear Flag */ -#define UART_CLEAR_CMF USART_ICR_CMCF /*!< Character Match Clear Flag */ -/** - * @} - */ - - -/** - * @} - */ - -/* Exported macros -----------------------------------------------------------*/ -/** @defgroup UART_Exported_Macros UART Exported Macros - * @{ - */ - -/** @brief Reset UART handle states. - * @param __HANDLE__ UART handle. - * @retval None - */ -#if (USE_HAL_UART_REGISTER_CALLBACKS == 1) -#define __HAL_UART_RESET_HANDLE_STATE(__HANDLE__) do{ \ - (__HANDLE__)->gState = HAL_UART_STATE_RESET; \ - (__HANDLE__)->RxState = HAL_UART_STATE_RESET; \ - (__HANDLE__)->MspInitCallback = NULL; \ - (__HANDLE__)->MspDeInitCallback = NULL; \ - } while(0U) -#else -#define __HAL_UART_RESET_HANDLE_STATE(__HANDLE__) do{ \ - (__HANDLE__)->gState = HAL_UART_STATE_RESET; \ - (__HANDLE__)->RxState = HAL_UART_STATE_RESET; \ - } while(0U) -#endif /*USE_HAL_UART_REGISTER_CALLBACKS */ - -/** @brief Flush the UART Data registers. - * @param __HANDLE__ specifies the UART Handle. - * @retval None - */ -#define __HAL_UART_FLUSH_DRREGISTER(__HANDLE__) \ - do{ \ - SET_BIT((__HANDLE__)->Instance->RQR, UART_RXDATA_FLUSH_REQUEST); \ - SET_BIT((__HANDLE__)->Instance->RQR, UART_TXDATA_FLUSH_REQUEST); \ - } while(0U) - -/** @brief Clear the specified UART pending flag. - * @param __HANDLE__ specifies the UART Handle. - * @param __FLAG__ specifies the flag to check. - * This parameter can be any combination of the following values: - * @arg @ref UART_CLEAR_PEF Parity Error Clear Flag - * @arg @ref UART_CLEAR_FEF Framing Error Clear Flag - * @arg @ref UART_CLEAR_NEF Noise detected Clear Flag - * @arg @ref UART_CLEAR_OREF Overrun Error Clear Flag - * @arg @ref UART_CLEAR_IDLEF IDLE line detected Clear Flag - * @arg @ref UART_CLEAR_TCF Transmission Complete Clear Flag - * @arg @ref UART_CLEAR_LBDF LIN Break Detection Clear Flag - * @arg @ref UART_CLEAR_CTSF CTS Interrupt Clear Flag - * @arg @ref UART_CLEAR_CMF Character Match Clear Flag - * @retval None - */ -#define __HAL_UART_CLEAR_FLAG(__HANDLE__, __FLAG__) ((__HANDLE__)->Instance->ICR = (__FLAG__)) - -/** @brief Clear the UART PE pending flag. - * @param __HANDLE__ specifies the UART Handle. - * @retval None - */ -#define __HAL_UART_CLEAR_PEFLAG(__HANDLE__) __HAL_UART_CLEAR_FLAG((__HANDLE__), UART_CLEAR_PEF) - -/** @brief Clear the UART FE pending flag. - * @param __HANDLE__ specifies the UART Handle. - * @retval None - */ -#define __HAL_UART_CLEAR_FEFLAG(__HANDLE__) __HAL_UART_CLEAR_FLAG((__HANDLE__), UART_CLEAR_FEF) - -/** @brief Clear the UART NE pending flag. - * @param __HANDLE__ specifies the UART Handle. - * @retval None - */ -#define __HAL_UART_CLEAR_NEFLAG(__HANDLE__) __HAL_UART_CLEAR_FLAG((__HANDLE__), UART_CLEAR_NEF) - -/** @brief Clear the UART ORE pending flag. - * @param __HANDLE__ specifies the UART Handle. - * @retval None - */ -#define __HAL_UART_CLEAR_OREFLAG(__HANDLE__) __HAL_UART_CLEAR_FLAG((__HANDLE__), UART_CLEAR_OREF) - -/** @brief Clear the UART IDLE pending flag. - * @param __HANDLE__ specifies the UART Handle. - * @retval None - */ -#define __HAL_UART_CLEAR_IDLEFLAG(__HANDLE__) __HAL_UART_CLEAR_FLAG((__HANDLE__), UART_CLEAR_IDLEF) - - -/** @brief Check whether the specified UART flag is set or not. - * @param __HANDLE__ specifies the UART Handle. - * @param __FLAG__ specifies the flag to check. - * This parameter can be one of the following values: - * @arg @ref UART_FLAG_TEACK Transmit enable acknowledge flag - * @arg @ref UART_FLAG_RWU Receiver wake up flag (if the UART in mute mode) - * @arg @ref UART_FLAG_SBKF Send Break flag - * @arg @ref UART_FLAG_CMF Character match flag - * @arg @ref UART_FLAG_BUSY Busy flag - * @arg @ref UART_FLAG_ABRF Auto Baud rate detection flag - * @arg @ref UART_FLAG_ABRE Auto Baud rate detection error flag - * @arg @ref UART_FLAG_CTS CTS Change flag - * @arg @ref UART_FLAG_LBDF LIN Break detection flag - * @arg @ref UART_FLAG_TXE Transmit data register empty flag - * @arg @ref UART_FLAG_TC Transmission Complete flag - * @arg @ref UART_FLAG_RXNE Receive data register not empty flag - * @arg @ref UART_FLAG_IDLE Idle Line detection flag - * @arg @ref UART_FLAG_ORE Overrun Error flag - * @arg @ref UART_FLAG_NE Noise Error flag - * @arg @ref UART_FLAG_FE Framing Error flag - * @arg @ref UART_FLAG_PE Parity Error flag - * @retval The new state of __FLAG__ (TRUE or FALSE). - */ -#define __HAL_UART_GET_FLAG(__HANDLE__, __FLAG__) (((__HANDLE__)->Instance->ISR & (__FLAG__)) == (__FLAG__)) - -/** @brief Enable the specified UART interrupt. - * @param __HANDLE__ specifies the UART Handle. - * @param __INTERRUPT__ specifies the UART interrupt source to enable. - * This parameter can be one of the following values: - * @arg @ref UART_IT_CM Character match interrupt - * @arg @ref UART_IT_CTS CTS change interrupt - * @arg @ref UART_IT_LBD LIN Break detection interrupt - * @arg @ref UART_IT_TXE Transmit Data Register empty interrupt - * @arg @ref UART_IT_TC Transmission complete interrupt - * @arg @ref UART_IT_RXNE Receive Data register not empty interrupt - * @arg @ref UART_IT_IDLE Idle line detection interrupt - * @arg @ref UART_IT_PE Parity Error interrupt - * @arg @ref UART_IT_ERR Error interrupt (frame error, noise error, overrun error) - * @retval None - */ -#define __HAL_UART_ENABLE_IT(__HANDLE__, __INTERRUPT__) (((((uint8_t)(__INTERRUPT__)) >> 5U) == 1U)? ((__HANDLE__)->Instance->CR1 |= (1U << ((__INTERRUPT__) & UART_IT_MASK))): \ - ((((uint8_t)(__INTERRUPT__)) >> 5U) == 2U)? ((__HANDLE__)->Instance->CR2 |= (1U << ((__INTERRUPT__) & UART_IT_MASK))): \ - ((__HANDLE__)->Instance->CR3 |= (1U << ((__INTERRUPT__) & UART_IT_MASK)))) - - -/** @brief Disable the specified UART interrupt. - * @param __HANDLE__ specifies the UART Handle. - * @param __INTERRUPT__ specifies the UART interrupt source to disable. - * This parameter can be one of the following values: - * @arg @ref UART_IT_CM Character match interrupt - * @arg @ref UART_IT_CTS CTS change interrupt - * @arg @ref UART_IT_LBD LIN Break detection interrupt - * @arg @ref UART_IT_TXE Transmit Data Register empty interrupt - * @arg @ref UART_IT_TC Transmission complete interrupt - * @arg @ref UART_IT_RXNE Receive Data register not empty interrupt - * @arg @ref UART_IT_IDLE Idle line detection interrupt - * @arg @ref UART_IT_PE Parity Error interrupt - * @arg @ref UART_IT_ERR Error interrupt (Frame error, noise error, overrun error) - * @retval None - */ -#define __HAL_UART_DISABLE_IT(__HANDLE__, __INTERRUPT__) (((((uint8_t)(__INTERRUPT__)) >> 5U) == 1U)? ((__HANDLE__)->Instance->CR1 &= ~ (1U << ((__INTERRUPT__) & UART_IT_MASK))): \ - ((((uint8_t)(__INTERRUPT__)) >> 5U) == 2U)? ((__HANDLE__)->Instance->CR2 &= ~ (1U << ((__INTERRUPT__) & UART_IT_MASK))): \ - ((__HANDLE__)->Instance->CR3 &= ~ (1U << ((__INTERRUPT__) & UART_IT_MASK)))) - -/** @brief Check whether the specified UART interrupt has occurred or not. - * @param __HANDLE__ specifies the UART Handle. - * @param __INTERRUPT__ specifies the UART interrupt to check. - * This parameter can be one of the following values: - * @arg @ref UART_IT_CM Character match interrupt - * @arg @ref UART_IT_CTS CTS change interrupt - * @arg @ref UART_IT_LBD LIN Break detection interrupt - * @arg @ref UART_IT_TXE Transmit Data Register empty interrupt - * @arg @ref UART_IT_TC Transmission complete interrupt - * @arg @ref UART_IT_RXNE Receive Data register not empty interrupt - * @arg @ref UART_IT_IDLE Idle line detection interrupt - * @arg @ref UART_IT_PE Parity Error interrupt - * @arg @ref UART_IT_ERR Error interrupt (Frame error, noise error, overrun error) - * @retval The new state of __INTERRUPT__ (SET or RESET). - */ -#define __HAL_UART_GET_IT(__HANDLE__, __INTERRUPT__) ((((__HANDLE__)->Instance->ISR & (1U << ((__INTERRUPT__)>> 8U))) != RESET) ? SET : RESET) - -/** @brief Check whether the specified UART interrupt source is enabled or not. - * @param __HANDLE__ specifies the UART Handle. - * @param __INTERRUPT__ specifies the UART interrupt source to check. - * This parameter can be one of the following values: - * @arg @ref UART_IT_CM Character match interrupt - * @arg @ref UART_IT_CTS CTS change interrupt - * @arg @ref UART_IT_LBD LIN Break detection interrupt - * @arg @ref UART_IT_TXE Transmit Data Register empty interrupt - * @arg @ref UART_IT_TC Transmission complete interrupt - * @arg @ref UART_IT_RXNE Receive Data register not empty interrupt - * @arg @ref UART_IT_IDLE Idle line detection interrupt - * @arg @ref UART_IT_PE Parity Error interrupt - * @arg @ref UART_IT_ERR Error interrupt (Frame error, noise error, overrun error) - * @retval The new state of __INTERRUPT__ (SET or RESET). - */ -#define __HAL_UART_GET_IT_SOURCE(__HANDLE__, __INTERRUPT__) ((((((((uint8_t)(__INTERRUPT__)) >> 5U) == 1U) ? (__HANDLE__)->Instance->CR1 : \ - (((((uint8_t)(__INTERRUPT__)) >> 5U) == 2U) ? (__HANDLE__)->Instance->CR2 : \ - (__HANDLE__)->Instance->CR3)) & (1U << (((uint16_t)(__INTERRUPT__)) & UART_IT_MASK))) != RESET) ? SET : RESET) - -/** @brief Clear the specified UART ISR flag, in setting the proper ICR register flag. - * @param __HANDLE__ specifies the UART Handle. - * @param __IT_CLEAR__ specifies the interrupt clear register flag that needs to be set - * to clear the corresponding interrupt - * This parameter can be one of the following values: - * @arg @ref UART_CLEAR_PEF Parity Error Clear Flag - * @arg @ref UART_CLEAR_FEF Framing Error Clear Flag - * @arg @ref UART_CLEAR_NEF Noise detected Clear Flag - * @arg @ref UART_CLEAR_OREF Overrun Error Clear Flag - * @arg @ref UART_CLEAR_IDLEF IDLE line detected Clear Flag - * @arg @ref UART_CLEAR_TCF Transmission Complete Clear Flag - * @arg @ref UART_CLEAR_LBDF LIN Break Detection Clear Flag - * @arg @ref UART_CLEAR_CTSF CTS Interrupt Clear Flag - * @arg @ref UART_CLEAR_CMF Character Match Clear Flag - * @retval None - */ -#define __HAL_UART_CLEAR_IT(__HANDLE__, __IT_CLEAR__) ((__HANDLE__)->Instance->ICR = (uint32_t)(__IT_CLEAR__)) - -/** @brief Set a specific UART request flag. - * @param __HANDLE__ specifies the UART Handle. - * @param __REQ__ specifies the request flag to set - * This parameter can be one of the following values: - * @arg @ref UART_AUTOBAUD_REQUEST Auto-Baud Rate Request - * @arg @ref UART_SENDBREAK_REQUEST Send Break Request - * @arg @ref UART_MUTE_MODE_REQUEST Mute Mode Request - * @arg @ref UART_RXDATA_FLUSH_REQUEST Receive Data flush Request - * @arg @ref UART_TXDATA_FLUSH_REQUEST Transmit data flush Request - * @retval None - */ -#define __HAL_UART_SEND_REQ(__HANDLE__, __REQ__) ((__HANDLE__)->Instance->RQR |= (uint16_t)(__REQ__)) - -/** @brief Enable the UART one bit sample method. - * @param __HANDLE__ specifies the UART Handle. - * @retval None - */ -#define __HAL_UART_ONE_BIT_SAMPLE_ENABLE(__HANDLE__) ((__HANDLE__)->Instance->CR3|= USART_CR3_ONEBIT) - -/** @brief Disable the UART one bit sample method. - * @param __HANDLE__ specifies the UART Handle. - * @retval None - */ -#define __HAL_UART_ONE_BIT_SAMPLE_DISABLE(__HANDLE__) ((__HANDLE__)->Instance->CR3 &= ~USART_CR3_ONEBIT) - -/** @brief Enable UART. - * @param __HANDLE__ specifies the UART Handle. - * @retval None - */ -#define __HAL_UART_ENABLE(__HANDLE__) ((__HANDLE__)->Instance->CR1 |= USART_CR1_UE) - -/** @brief Disable UART. - * @param __HANDLE__ specifies the UART Handle. - * @retval None - */ -#define __HAL_UART_DISABLE(__HANDLE__) ((__HANDLE__)->Instance->CR1 &= ~USART_CR1_UE) - -/** @brief Enable CTS flow control. - * @note This macro allows to enable CTS hardware flow control for a given UART instance, - * without need to call HAL_UART_Init() function. - * As involving direct access to UART registers, usage of this macro should be fully endorsed by user. - * @note As macro is expected to be used for modifying CTS Hw flow control feature activation, without need - * for USART instance Deinit/Init, following conditions for macro call should be fulfilled : - * - UART instance should have already been initialised (through call of HAL_UART_Init() ) - * - macro could only be called when corresponding UART instance is disabled (i.e. __HAL_UART_DISABLE(__HANDLE__)) - * and should be followed by an Enable macro (i.e. __HAL_UART_ENABLE(__HANDLE__)). - * @param __HANDLE__ specifies the UART Handle. - * @retval None - */ -#define __HAL_UART_HWCONTROL_CTS_ENABLE(__HANDLE__) \ - do{ \ - SET_BIT((__HANDLE__)->Instance->CR3, USART_CR3_CTSE); \ - (__HANDLE__)->Init.HwFlowCtl |= USART_CR3_CTSE; \ - } while(0U) - -/** @brief Disable CTS flow control. - * @note This macro allows to disable CTS hardware flow control for a given UART instance, - * without need to call HAL_UART_Init() function. - * As involving direct access to UART registers, usage of this macro should be fully endorsed by user. - * @note As macro is expected to be used for modifying CTS Hw flow control feature activation, without need - * for USART instance Deinit/Init, following conditions for macro call should be fulfilled : - * - UART instance should have already been initialised (through call of HAL_UART_Init() ) - * - macro could only be called when corresponding UART instance is disabled (i.e. __HAL_UART_DISABLE(__HANDLE__)) - * and should be followed by an Enable macro (i.e. __HAL_UART_ENABLE(__HANDLE__)). - * @param __HANDLE__ specifies the UART Handle. - * @retval None - */ -#define __HAL_UART_HWCONTROL_CTS_DISABLE(__HANDLE__) \ - do{ \ - CLEAR_BIT((__HANDLE__)->Instance->CR3, USART_CR3_CTSE); \ - (__HANDLE__)->Init.HwFlowCtl &= ~(USART_CR3_CTSE); \ - } while(0U) - -/** @brief Enable RTS flow control. - * @note This macro allows to enable RTS hardware flow control for a given UART instance, - * without need to call HAL_UART_Init() function. - * As involving direct access to UART registers, usage of this macro should be fully endorsed by user. - * @note As macro is expected to be used for modifying RTS Hw flow control feature activation, without need - * for USART instance Deinit/Init, following conditions for macro call should be fulfilled : - * - UART instance should have already been initialised (through call of HAL_UART_Init() ) - * - macro could only be called when corresponding UART instance is disabled (i.e. __HAL_UART_DISABLE(__HANDLE__)) - * and should be followed by an Enable macro (i.e. __HAL_UART_ENABLE(__HANDLE__)). - * @param __HANDLE__ specifies the UART Handle. - * @retval None - */ -#define __HAL_UART_HWCONTROL_RTS_ENABLE(__HANDLE__) \ - do{ \ - SET_BIT((__HANDLE__)->Instance->CR3, USART_CR3_RTSE); \ - (__HANDLE__)->Init.HwFlowCtl |= USART_CR3_RTSE; \ - } while(0U) - -/** @brief Disable RTS flow control. - * @note This macro allows to disable RTS hardware flow control for a given UART instance, - * without need to call HAL_UART_Init() function. - * As involving direct access to UART registers, usage of this macro should be fully endorsed by user. - * @note As macro is expected to be used for modifying RTS Hw flow control feature activation, without need - * for USART instance Deinit/Init, following conditions for macro call should be fulfilled : - * - UART instance should have already been initialised (through call of HAL_UART_Init() ) - * - macro could only be called when corresponding UART instance is disabled (i.e. __HAL_UART_DISABLE(__HANDLE__)) - * and should be followed by an Enable macro (i.e. __HAL_UART_ENABLE(__HANDLE__)). - * @param __HANDLE__ specifies the UART Handle. - * @retval None - */ -#define __HAL_UART_HWCONTROL_RTS_DISABLE(__HANDLE__) \ - do{ \ - CLEAR_BIT((__HANDLE__)->Instance->CR3, USART_CR3_RTSE);\ - (__HANDLE__)->Init.HwFlowCtl &= ~(USART_CR3_RTSE); \ - } while(0U) -/** - * @} - */ - -/* Private macros --------------------------------------------------------*/ -/** @defgroup UART_Private_Macros UART Private Macros - * @{ - */ - - -/** @brief BRR division operation to set BRR register in 8-bit oversampling mode. - * @param __PCLK__ UART clock. - * @param __BAUD__ Baud rate set by the user. - * @retval Division result - */ -#define UART_DIV_SAMPLING8(__PCLK__, __BAUD__) ((((__PCLK__)*2U) + ((__BAUD__)/2U)) / (__BAUD__)) - -/** @brief BRR division operation to set BRR register in 16-bit oversampling mode. - * @param __PCLK__ UART clock. - * @param __BAUD__ Baud rate set by the user. - * @retval Division result - */ -#define UART_DIV_SAMPLING16(__PCLK__, __BAUD__) (((__PCLK__) + ((__BAUD__)/2U)) / (__BAUD__)) - - -/** @brief Check UART Baud rate. - * @param __BAUDRATE__ Baudrate specified by the user. - * The maximum Baud Rate is derived from the maximum clock on F7 (i.e. 216 MHz) - * divided by the smallest oversampling used on the USART (i.e. 8) - * @retval SET (__BAUDRATE__ is valid) or RESET (__BAUDRATE__ is invalid) - */ -#define IS_UART_BAUDRATE(__BAUDRATE__) ((__BAUDRATE__) < 27000001U) - -/** @brief Check UART assertion time. - * @param __TIME__ 5-bit value assertion time. - * @retval Test result (TRUE or FALSE). - */ -#define IS_UART_ASSERTIONTIME(__TIME__) ((__TIME__) <= 0x1FU) - -/** @brief Check UART deassertion time. - * @param __TIME__ 5-bit value deassertion time. - * @retval Test result (TRUE or FALSE). - */ -#define IS_UART_DEASSERTIONTIME(__TIME__) ((__TIME__) <= 0x1FU) - -/** - * @brief Ensure that UART frame number of stop bits is valid. - * @param __STOPBITS__ UART frame number of stop bits. - * @retval SET (__STOPBITS__ is valid) or RESET (__STOPBITS__ is invalid) - */ -#define IS_UART_STOPBITS(__STOPBITS__) (((__STOPBITS__) == UART_STOPBITS_0_5) || \ - ((__STOPBITS__) == UART_STOPBITS_1) || \ - ((__STOPBITS__) == UART_STOPBITS_1_5) || \ - ((__STOPBITS__) == UART_STOPBITS_2)) - - -/** - * @brief Ensure that UART frame parity is valid. - * @param __PARITY__ UART frame parity. - * @retval SET (__PARITY__ is valid) or RESET (__PARITY__ is invalid) - */ -#define IS_UART_PARITY(__PARITY__) (((__PARITY__) == UART_PARITY_NONE) || \ - ((__PARITY__) == UART_PARITY_EVEN) || \ - ((__PARITY__) == UART_PARITY_ODD)) - -/** - * @brief Ensure that UART hardware flow control is valid. - * @param __CONTROL__ UART hardware flow control. - * @retval SET (__CONTROL__ is valid) or RESET (__CONTROL__ is invalid) - */ -#define IS_UART_HARDWARE_FLOW_CONTROL(__CONTROL__)\ - (((__CONTROL__) == UART_HWCONTROL_NONE) || \ - ((__CONTROL__) == UART_HWCONTROL_RTS) || \ - ((__CONTROL__) == UART_HWCONTROL_CTS) || \ - ((__CONTROL__) == UART_HWCONTROL_RTS_CTS)) - -/** - * @brief Ensure that UART communication mode is valid. - * @param __MODE__ UART communication mode. - * @retval SET (__MODE__ is valid) or RESET (__MODE__ is invalid) - */ -#define IS_UART_MODE(__MODE__) ((((__MODE__) & (~((uint32_t)(UART_MODE_TX_RX)))) == 0x00U) && ((__MODE__) != 0x00U)) - -/** - * @brief Ensure that UART state is valid. - * @param __STATE__ UART state. - * @retval SET (__STATE__ is valid) or RESET (__STATE__ is invalid) - */ -#define IS_UART_STATE(__STATE__) (((__STATE__) == UART_STATE_DISABLE) || \ - ((__STATE__) == UART_STATE_ENABLE)) - -/** - * @brief Ensure that UART oversampling is valid. - * @param __SAMPLING__ UART oversampling. - * @retval SET (__SAMPLING__ is valid) or RESET (__SAMPLING__ is invalid) - */ -#define IS_UART_OVERSAMPLING(__SAMPLING__) (((__SAMPLING__) == UART_OVERSAMPLING_16) || \ - ((__SAMPLING__) == UART_OVERSAMPLING_8)) - -/** - * @brief Ensure that UART frame sampling is valid. - * @param __ONEBIT__ UART frame sampling. - * @retval SET (__ONEBIT__ is valid) or RESET (__ONEBIT__ is invalid) - */ -#define IS_UART_ONE_BIT_SAMPLE(__ONEBIT__) (((__ONEBIT__) == UART_ONE_BIT_SAMPLE_DISABLE) || \ - ((__ONEBIT__) == UART_ONE_BIT_SAMPLE_ENABLE)) - -/** - * @brief Ensure that UART auto Baud rate detection mode is valid. - * @param __MODE__ UART auto Baud rate detection mode. - * @retval SET (__MODE__ is valid) or RESET (__MODE__ is invalid) - */ -#define IS_UART_ADVFEATURE_AUTOBAUDRATEMODE(__MODE__) (((__MODE__) == UART_ADVFEATURE_AUTOBAUDRATE_ONSTARTBIT) || \ - ((__MODE__) == UART_ADVFEATURE_AUTOBAUDRATE_ONFALLINGEDGE) || \ - ((__MODE__) == UART_ADVFEATURE_AUTOBAUDRATE_ON0X7FFRAME) || \ - ((__MODE__) == UART_ADVFEATURE_AUTOBAUDRATE_ON0X55FRAME)) - -/** - * @brief Ensure that UART receiver timeout setting is valid. - * @param __TIMEOUT__ UART receiver timeout setting. - * @retval SET (__TIMEOUT__ is valid) or RESET (__TIMEOUT__ is invalid) - */ -#define IS_UART_RECEIVER_TIMEOUT(__TIMEOUT__) (((__TIMEOUT__) == UART_RECEIVER_TIMEOUT_DISABLE) || \ - ((__TIMEOUT__) == UART_RECEIVER_TIMEOUT_ENABLE)) - -/** - * @brief Ensure that UART LIN state is valid. - * @param __LIN__ UART LIN state. - * @retval SET (__LIN__ is valid) or RESET (__LIN__ is invalid) - */ -#define IS_UART_LIN(__LIN__) (((__LIN__) == UART_LIN_DISABLE) || \ - ((__LIN__) == UART_LIN_ENABLE)) - -/** - * @brief Ensure that UART LIN break detection length is valid. - * @param __LENGTH__ UART LIN break detection length. - * @retval SET (__LENGTH__ is valid) or RESET (__LENGTH__ is invalid) - */ -#define IS_UART_LIN_BREAK_DETECT_LENGTH(__LENGTH__) (((__LENGTH__) == UART_LINBREAKDETECTLENGTH_10B) || \ - ((__LENGTH__) == UART_LINBREAKDETECTLENGTH_11B)) - -/** - * @brief Ensure that UART DMA TX state is valid. - * @param __DMATX__ UART DMA TX state. - * @retval SET (__DMATX__ is valid) or RESET (__DMATX__ is invalid) - */ -#define IS_UART_DMA_TX(__DMATX__) (((__DMATX__) == UART_DMA_TX_DISABLE) || \ - ((__DMATX__) == UART_DMA_TX_ENABLE)) - -/** - * @brief Ensure that UART DMA RX state is valid. - * @param __DMARX__ UART DMA RX state. - * @retval SET (__DMARX__ is valid) or RESET (__DMARX__ is invalid) - */ -#define IS_UART_DMA_RX(__DMARX__) (((__DMARX__) == UART_DMA_RX_DISABLE) || \ - ((__DMARX__) == UART_DMA_RX_ENABLE)) - -/** - * @brief Ensure that UART half-duplex state is valid. - * @param __HDSEL__ UART half-duplex state. - * @retval SET (__HDSEL__ is valid) or RESET (__HDSEL__ is invalid) - */ -#define IS_UART_HALF_DUPLEX(__HDSEL__) (((__HDSEL__) == UART_HALF_DUPLEX_DISABLE) || \ - ((__HDSEL__) == UART_HALF_DUPLEX_ENABLE)) - -/** - * @brief Ensure that UART wake-up method is valid. - * @param __WAKEUP__ UART wake-up method . - * @retval SET (__WAKEUP__ is valid) or RESET (__WAKEUP__ is invalid) - */ -#define IS_UART_WAKEUPMETHOD(__WAKEUP__) (((__WAKEUP__) == UART_WAKEUPMETHOD_IDLELINE) || \ - ((__WAKEUP__) == UART_WAKEUPMETHOD_ADDRESSMARK)) - -/** - * @brief Ensure that UART request parameter is valid. - * @param __PARAM__ UART request parameter. - * @retval SET (__PARAM__ is valid) or RESET (__PARAM__ is invalid) - */ -#define IS_UART_REQUEST_PARAMETER(__PARAM__) (((__PARAM__) == UART_AUTOBAUD_REQUEST) || \ - ((__PARAM__) == UART_SENDBREAK_REQUEST) || \ - ((__PARAM__) == UART_MUTE_MODE_REQUEST) || \ - ((__PARAM__) == UART_RXDATA_FLUSH_REQUEST) || \ - ((__PARAM__) == UART_TXDATA_FLUSH_REQUEST)) - -/** - * @brief Ensure that UART advanced features initialization is valid. - * @param __INIT__ UART advanced features initialization. - * @retval SET (__INIT__ is valid) or RESET (__INIT__ is invalid) - */ -#define IS_UART_ADVFEATURE_INIT(__INIT__) ((__INIT__) <= (UART_ADVFEATURE_NO_INIT | \ - UART_ADVFEATURE_TXINVERT_INIT | \ - UART_ADVFEATURE_RXINVERT_INIT | \ - UART_ADVFEATURE_DATAINVERT_INIT | \ - UART_ADVFEATURE_SWAP_INIT | \ - UART_ADVFEATURE_RXOVERRUNDISABLE_INIT | \ - UART_ADVFEATURE_DMADISABLEONERROR_INIT | \ - UART_ADVFEATURE_AUTOBAUDRATE_INIT | \ - UART_ADVFEATURE_MSBFIRST_INIT)) - -/** - * @brief Ensure that UART frame TX inversion setting is valid. - * @param __TXINV__ UART frame TX inversion setting. - * @retval SET (__TXINV__ is valid) or RESET (__TXINV__ is invalid) - */ -#define IS_UART_ADVFEATURE_TXINV(__TXINV__) (((__TXINV__) == UART_ADVFEATURE_TXINV_DISABLE) || \ - ((__TXINV__) == UART_ADVFEATURE_TXINV_ENABLE)) - -/** - * @brief Ensure that UART frame RX inversion setting is valid. - * @param __RXINV__ UART frame RX inversion setting. - * @retval SET (__RXINV__ is valid) or RESET (__RXINV__ is invalid) - */ -#define IS_UART_ADVFEATURE_RXINV(__RXINV__) (((__RXINV__) == UART_ADVFEATURE_RXINV_DISABLE) || \ - ((__RXINV__) == UART_ADVFEATURE_RXINV_ENABLE)) - -/** - * @brief Ensure that UART frame data inversion setting is valid. - * @param __DATAINV__ UART frame data inversion setting. - * @retval SET (__DATAINV__ is valid) or RESET (__DATAINV__ is invalid) - */ -#define IS_UART_ADVFEATURE_DATAINV(__DATAINV__) (((__DATAINV__) == UART_ADVFEATURE_DATAINV_DISABLE) || \ - ((__DATAINV__) == UART_ADVFEATURE_DATAINV_ENABLE)) - -/** - * @brief Ensure that UART frame RX/TX pins swap setting is valid. - * @param __SWAP__ UART frame RX/TX pins swap setting. - * @retval SET (__SWAP__ is valid) or RESET (__SWAP__ is invalid) - */ -#define IS_UART_ADVFEATURE_SWAP(__SWAP__) (((__SWAP__) == UART_ADVFEATURE_SWAP_DISABLE) || \ - ((__SWAP__) == UART_ADVFEATURE_SWAP_ENABLE)) - -/** - * @brief Ensure that UART frame overrun setting is valid. - * @param __OVERRUN__ UART frame overrun setting. - * @retval SET (__OVERRUN__ is valid) or RESET (__OVERRUN__ is invalid) - */ -#define IS_UART_OVERRUN(__OVERRUN__) (((__OVERRUN__) == UART_ADVFEATURE_OVERRUN_ENABLE) || \ - ((__OVERRUN__) == UART_ADVFEATURE_OVERRUN_DISABLE)) - -/** - * @brief Ensure that UART auto Baud rate state is valid. - * @param __AUTOBAUDRATE__ UART auto Baud rate state. - * @retval SET (__AUTOBAUDRATE__ is valid) or RESET (__AUTOBAUDRATE__ is invalid) - */ -#define IS_UART_ADVFEATURE_AUTOBAUDRATE(__AUTOBAUDRATE__) (((__AUTOBAUDRATE__) == UART_ADVFEATURE_AUTOBAUDRATE_DISABLE) || \ - ((__AUTOBAUDRATE__) == UART_ADVFEATURE_AUTOBAUDRATE_ENABLE)) - -/** - * @brief Ensure that UART DMA enabling or disabling on error setting is valid. - * @param __DMA__ UART DMA enabling or disabling on error setting. - * @retval SET (__DMA__ is valid) or RESET (__DMA__ is invalid) - */ -#define IS_UART_ADVFEATURE_DMAONRXERROR(__DMA__) (((__DMA__) == UART_ADVFEATURE_DMA_ENABLEONRXERROR) || \ - ((__DMA__) == UART_ADVFEATURE_DMA_DISABLEONRXERROR)) - -/** - * @brief Ensure that UART frame MSB first setting is valid. - * @param __MSBFIRST__ UART frame MSB first setting. - * @retval SET (__MSBFIRST__ is valid) or RESET (__MSBFIRST__ is invalid) - */ -#define IS_UART_ADVFEATURE_MSBFIRST(__MSBFIRST__) (((__MSBFIRST__) == UART_ADVFEATURE_MSBFIRST_DISABLE) || \ - ((__MSBFIRST__) == UART_ADVFEATURE_MSBFIRST_ENABLE)) - -/** - * @brief Ensure that UART mute mode state is valid. - * @param __MUTE__ UART mute mode state. - * @retval SET (__MUTE__ is valid) or RESET (__MUTE__ is invalid) - */ -#define IS_UART_MUTE_MODE(__MUTE__) (((__MUTE__) == UART_ADVFEATURE_MUTEMODE_DISABLE) || \ - ((__MUTE__) == UART_ADVFEATURE_MUTEMODE_ENABLE)) - -/** - * @brief Ensure that UART driver enable polarity is valid. - * @param __POLARITY__ UART driver enable polarity. - * @retval SET (__POLARITY__ is valid) or RESET (__POLARITY__ is invalid) - */ -#define IS_UART_DE_POLARITY(__POLARITY__) (((__POLARITY__) == UART_DE_POLARITY_HIGH) || \ - ((__POLARITY__) == UART_DE_POLARITY_LOW)) - - -/** - * @} - */ - -/* Include UART HAL Extended module */ -#include "stm32f7xx_hal_uart_ex.h" - - -/* Exported functions --------------------------------------------------------*/ -/** @addtogroup UART_Exported_Functions UART Exported Functions - * @{ - */ - -/** @addtogroup UART_Exported_Functions_Group1 Initialization and de-initialization functions - * @{ - */ - -/* Initialization and de-initialization functions ****************************/ -HAL_StatusTypeDef HAL_UART_Init(UART_HandleTypeDef *huart); -HAL_StatusTypeDef HAL_HalfDuplex_Init(UART_HandleTypeDef *huart); -HAL_StatusTypeDef HAL_LIN_Init(UART_HandleTypeDef *huart, uint32_t BreakDetectLength); -HAL_StatusTypeDef HAL_MultiProcessor_Init(UART_HandleTypeDef *huart, uint8_t Address, uint32_t WakeUpMethod); -HAL_StatusTypeDef HAL_UART_DeInit(UART_HandleTypeDef *huart); -void HAL_UART_MspInit(UART_HandleTypeDef *huart); -void HAL_UART_MspDeInit(UART_HandleTypeDef *huart); - -/* Callbacks Register/UnRegister functions ***********************************/ -#if (USE_HAL_UART_REGISTER_CALLBACKS == 1) -HAL_StatusTypeDef HAL_UART_RegisterCallback(UART_HandleTypeDef *huart, HAL_UART_CallbackIDTypeDef CallbackID, pUART_CallbackTypeDef pCallback); -HAL_StatusTypeDef HAL_UART_UnRegisterCallback(UART_HandleTypeDef *huart, HAL_UART_CallbackIDTypeDef CallbackID); -#endif /* USE_HAL_UART_REGISTER_CALLBACKS */ - -/** - * @} - */ - -/** @addtogroup UART_Exported_Functions_Group2 IO operation functions - * @{ - */ - -/* IO operation functions *****************************************************/ -HAL_StatusTypeDef HAL_UART_Transmit(UART_HandleTypeDef *huart, uint8_t *pData, uint16_t Size, uint32_t Timeout); -HAL_StatusTypeDef HAL_UART_Receive(UART_HandleTypeDef *huart, uint8_t *pData, uint16_t Size, uint32_t Timeout); -HAL_StatusTypeDef HAL_UART_Transmit_IT(UART_HandleTypeDef *huart, uint8_t *pData, uint16_t Size); -HAL_StatusTypeDef HAL_UART_Receive_IT(UART_HandleTypeDef *huart, uint8_t *pData, uint16_t Size); -HAL_StatusTypeDef HAL_UART_Transmit_DMA(UART_HandleTypeDef *huart, uint8_t *pData, uint16_t Size); -HAL_StatusTypeDef HAL_UART_Receive_DMA(UART_HandleTypeDef *huart, uint8_t *pData, uint16_t Size); -HAL_StatusTypeDef HAL_UART_DMAPause(UART_HandleTypeDef *huart); -HAL_StatusTypeDef HAL_UART_DMAResume(UART_HandleTypeDef *huart); -HAL_StatusTypeDef HAL_UART_DMAStop(UART_HandleTypeDef *huart); -/* Transfer Abort functions */ -HAL_StatusTypeDef HAL_UART_Abort(UART_HandleTypeDef *huart); -HAL_StatusTypeDef HAL_UART_AbortTransmit(UART_HandleTypeDef *huart); -HAL_StatusTypeDef HAL_UART_AbortReceive(UART_HandleTypeDef *huart); -HAL_StatusTypeDef HAL_UART_Abort_IT(UART_HandleTypeDef *huart); -HAL_StatusTypeDef HAL_UART_AbortTransmit_IT(UART_HandleTypeDef *huart); -HAL_StatusTypeDef HAL_UART_AbortReceive_IT(UART_HandleTypeDef *huart); - -void HAL_UART_IRQHandler(UART_HandleTypeDef *huart); -void HAL_UART_TxHalfCpltCallback(UART_HandleTypeDef *huart); -void HAL_UART_TxCpltCallback(UART_HandleTypeDef *huart); -void HAL_UART_RxHalfCpltCallback(UART_HandleTypeDef *huart); -void HAL_UART_RxCpltCallback(UART_HandleTypeDef *huart); -void HAL_UART_ErrorCallback(UART_HandleTypeDef *huart); -void HAL_UART_AbortCpltCallback(UART_HandleTypeDef *huart); -void HAL_UART_AbortTransmitCpltCallback(UART_HandleTypeDef *huart); -void HAL_UART_AbortReceiveCpltCallback(UART_HandleTypeDef *huart); - -/** - * @} - */ - -/** @addtogroup UART_Exported_Functions_Group3 Peripheral Control functions - * @{ - */ - -/* Peripheral Control functions ************************************************/ -HAL_StatusTypeDef HAL_LIN_SendBreak(UART_HandleTypeDef *huart); -HAL_StatusTypeDef HAL_MultiProcessor_EnableMuteMode(UART_HandleTypeDef *huart); -HAL_StatusTypeDef HAL_MultiProcessor_DisableMuteMode(UART_HandleTypeDef *huart); -void HAL_MultiProcessor_EnterMuteMode(UART_HandleTypeDef *huart); -HAL_StatusTypeDef HAL_HalfDuplex_EnableTransmitter(UART_HandleTypeDef *huart); -HAL_StatusTypeDef HAL_HalfDuplex_EnableReceiver(UART_HandleTypeDef *huart); - -/** - * @} - */ - -/** @addtogroup UART_Exported_Functions_Group4 Peripheral State and Error functions - * @{ - */ - -/* Peripheral State and Errors functions **************************************************/ -HAL_UART_StateTypeDef HAL_UART_GetState(UART_HandleTypeDef *huart); -uint32_t HAL_UART_GetError(UART_HandleTypeDef *huart); - -/** - * @} - */ - -/** - * @} - */ - -/* Private functions -----------------------------------------------------------*/ -/** @addtogroup UART_Private_Functions UART Private Functions - * @{ - */ -#if (USE_HAL_UART_REGISTER_CALLBACKS == 1) -void UART_InitCallbacksToDefault(UART_HandleTypeDef *huart); -#endif /* USE_HAL_UART_REGISTER_CALLBACKS */ -HAL_StatusTypeDef UART_SetConfig(UART_HandleTypeDef *huart); -HAL_StatusTypeDef UART_CheckIdleState(UART_HandleTypeDef *huart); -HAL_StatusTypeDef UART_WaitOnFlagUntilTimeout(UART_HandleTypeDef *huart, uint32_t Flag, FlagStatus Status, uint32_t Tickstart, uint32_t Timeout); -void UART_AdvFeatureConfig(UART_HandleTypeDef *huart); - -/** - * @} - */ - -/** - * @} - */ - -/** - * @} - */ - -#ifdef __cplusplus -} -#endif - -#endif /* STM32F7xx_HAL_UART_H */ - -/************************ (C) COPYRIGHT STMicroelectronics *****END OF FILE****/ diff --git a/test_dma/Drivers/STM32F7xx_HAL_Driver/Inc/stm32f7xx_hal_uart_ex.h b/test_dma/Drivers/STM32F7xx_HAL_Driver/Inc/stm32f7xx_hal_uart_ex.h deleted file mode 100644 index a5907f5..0000000 --- a/test_dma/Drivers/STM32F7xx_HAL_Driver/Inc/stm32f7xx_hal_uart_ex.h +++ /dev/null @@ -1,393 +0,0 @@ -/** - ****************************************************************************** - * @file stm32f7xx_hal_uart_ex.h - * @author MCD Application Team - * @brief Header file of UART HAL Extended module. - ****************************************************************************** - * @attention - * - *

© Copyright (c) 2017 STMicroelectronics. - * All rights reserved.

- * - * This software component is licensed by ST under BSD 3-Clause license, - * the "License"; You may not use this file except in compliance with the - * License. You may obtain a copy of the License at: - * opensource.org/licenses/BSD-3-Clause - * - ****************************************************************************** - */ - -/* Define to prevent recursive inclusion -------------------------------------*/ -#ifndef STM32F7xx_HAL_UART_EX_H -#define STM32F7xx_HAL_UART_EX_H - -#ifdef __cplusplus -extern "C" { -#endif - -/* Includes ------------------------------------------------------------------*/ -#include "stm32f7xx_hal_def.h" - -/** @addtogroup STM32F7xx_HAL_Driver - * @{ - */ - -/** @addtogroup UARTEx - * @{ - */ - -/* Exported types ------------------------------------------------------------*/ -/** @defgroup UARTEx_Exported_Types UARTEx Exported Types - * @{ - */ - - -/** - * @} - */ - -/* Exported constants --------------------------------------------------------*/ -/** @defgroup UARTEx_Exported_Constants UARTEx Exported Constants - * @{ - */ - -/** @defgroup UARTEx_Word_Length UARTEx Word Length - * @{ - */ -#define UART_WORDLENGTH_7B USART_CR1_M1 /*!< 7-bit long UART frame */ -#define UART_WORDLENGTH_8B 0x00000000U /*!< 8-bit long UART frame */ -#define UART_WORDLENGTH_9B USART_CR1_M0 /*!< 9-bit long UART frame */ -/** - * @} - */ - -/** @defgroup UARTEx_WakeUp_Address_Length UARTEx WakeUp Address Length - * @{ - */ -#define UART_ADDRESS_DETECT_4B 0x00000000U /*!< 4-bit long wake-up address */ -#define UART_ADDRESS_DETECT_7B USART_CR2_ADDM7 /*!< 7-bit long wake-up address */ -/** - * @} - */ - - -/** - * @} - */ - -/* Exported macros -----------------------------------------------------------*/ -/* Exported functions --------------------------------------------------------*/ -/** @addtogroup UARTEx_Exported_Functions - * @{ - */ - -/** @addtogroup UARTEx_Exported_Functions_Group1 - * @{ - */ - -/* Initialization and de-initialization functions ****************************/ -HAL_StatusTypeDef HAL_RS485Ex_Init(UART_HandleTypeDef *huart, uint32_t Polarity, uint32_t AssertionTime, uint32_t DeassertionTime); - -/** - * @} - */ - -/** @addtogroup UARTEx_Exported_Functions_Group2 - * @{ - */ - - -/** - * @} - */ - -/** @addtogroup UARTEx_Exported_Functions_Group3 - * @{ - */ - -/* Peripheral Control functions **********************************************/ -HAL_StatusTypeDef HAL_MultiProcessorEx_AddressLength_Set(UART_HandleTypeDef *huart, uint32_t AddressLength); - -/** - * @} - */ - -/** - * @} - */ - -/* Private macros ------------------------------------------------------------*/ -/** @defgroup UARTEx_Private_Macros UARTEx Private Macros - * @{ - */ - -/** @brief Report the UART clock source. - * @param __HANDLE__ specifies the UART Handle. - * @param __CLOCKSOURCE__ output variable. - * @retval UART clocking source, written in __CLOCKSOURCE__. - */ -#define UART_GETCLOCKSOURCE(__HANDLE__,__CLOCKSOURCE__) \ - do { \ - if((__HANDLE__)->Instance == USART1) \ - { \ - switch(__HAL_RCC_GET_USART1_SOURCE()) \ - { \ - case RCC_USART1CLKSOURCE_PCLK2: \ - (__CLOCKSOURCE__) = UART_CLOCKSOURCE_PCLK2; \ - break; \ - case RCC_USART1CLKSOURCE_HSI: \ - (__CLOCKSOURCE__) = UART_CLOCKSOURCE_HSI; \ - break; \ - case RCC_USART1CLKSOURCE_SYSCLK: \ - (__CLOCKSOURCE__) = UART_CLOCKSOURCE_SYSCLK; \ - break; \ - case RCC_USART1CLKSOURCE_LSE: \ - (__CLOCKSOURCE__) = UART_CLOCKSOURCE_LSE; \ - break; \ - default: \ - (__CLOCKSOURCE__) = UART_CLOCKSOURCE_UNDEFINED; \ - break; \ - } \ - } \ - else if((__HANDLE__)->Instance == USART2) \ - { \ - switch(__HAL_RCC_GET_USART2_SOURCE()) \ - { \ - case RCC_USART2CLKSOURCE_PCLK1: \ - (__CLOCKSOURCE__) = UART_CLOCKSOURCE_PCLK1; \ - break; \ - case RCC_USART2CLKSOURCE_HSI: \ - (__CLOCKSOURCE__) = UART_CLOCKSOURCE_HSI; \ - break; \ - case RCC_USART2CLKSOURCE_SYSCLK: \ - (__CLOCKSOURCE__) = UART_CLOCKSOURCE_SYSCLK; \ - break; \ - case RCC_USART2CLKSOURCE_LSE: \ - (__CLOCKSOURCE__) = UART_CLOCKSOURCE_LSE; \ - break; \ - default: \ - (__CLOCKSOURCE__) = UART_CLOCKSOURCE_UNDEFINED; \ - break; \ - } \ - } \ - else if((__HANDLE__)->Instance == USART3) \ - { \ - switch(__HAL_RCC_GET_USART3_SOURCE()) \ - { \ - case RCC_USART3CLKSOURCE_PCLK1: \ - (__CLOCKSOURCE__) = UART_CLOCKSOURCE_PCLK1; \ - break; \ - case RCC_USART3CLKSOURCE_HSI: \ - (__CLOCKSOURCE__) = UART_CLOCKSOURCE_HSI; \ - break; \ - case RCC_USART3CLKSOURCE_SYSCLK: \ - (__CLOCKSOURCE__) = UART_CLOCKSOURCE_SYSCLK; \ - break; \ - case RCC_USART3CLKSOURCE_LSE: \ - (__CLOCKSOURCE__) = UART_CLOCKSOURCE_LSE; \ - break; \ - default: \ - (__CLOCKSOURCE__) = UART_CLOCKSOURCE_UNDEFINED; \ - break; \ - } \ - } \ - else if((__HANDLE__)->Instance == UART4) \ - { \ - switch(__HAL_RCC_GET_UART4_SOURCE()) \ - { \ - case RCC_UART4CLKSOURCE_PCLK1: \ - (__CLOCKSOURCE__) = UART_CLOCKSOURCE_PCLK1; \ - break; \ - case RCC_UART4CLKSOURCE_HSI: \ - (__CLOCKSOURCE__) = UART_CLOCKSOURCE_HSI; \ - break; \ - case RCC_UART4CLKSOURCE_SYSCLK: \ - (__CLOCKSOURCE__) = UART_CLOCKSOURCE_SYSCLK; \ - break; \ - case RCC_UART4CLKSOURCE_LSE: \ - (__CLOCKSOURCE__) = UART_CLOCKSOURCE_LSE; \ - break; \ - default: \ - (__CLOCKSOURCE__) = UART_CLOCKSOURCE_UNDEFINED; \ - break; \ - } \ - } \ - else if ((__HANDLE__)->Instance == UART5) \ - { \ - switch(__HAL_RCC_GET_UART5_SOURCE()) \ - { \ - case RCC_UART5CLKSOURCE_PCLK1: \ - (__CLOCKSOURCE__) = UART_CLOCKSOURCE_PCLK1; \ - break; \ - case RCC_UART5CLKSOURCE_HSI: \ - (__CLOCKSOURCE__) = UART_CLOCKSOURCE_HSI; \ - break; \ - case RCC_UART5CLKSOURCE_SYSCLK: \ - (__CLOCKSOURCE__) = UART_CLOCKSOURCE_SYSCLK; \ - break; \ - case RCC_UART5CLKSOURCE_LSE: \ - (__CLOCKSOURCE__) = UART_CLOCKSOURCE_LSE; \ - break; \ - default: \ - (__CLOCKSOURCE__) = UART_CLOCKSOURCE_UNDEFINED; \ - break; \ - } \ - } \ - else if((__HANDLE__)->Instance == USART6) \ - { \ - switch(__HAL_RCC_GET_USART6_SOURCE()) \ - { \ - case RCC_USART6CLKSOURCE_PCLK2: \ - (__CLOCKSOURCE__) = UART_CLOCKSOURCE_PCLK2; \ - break; \ - case RCC_USART6CLKSOURCE_HSI: \ - (__CLOCKSOURCE__) = UART_CLOCKSOURCE_HSI; \ - break; \ - case RCC_USART6CLKSOURCE_SYSCLK: \ - (__CLOCKSOURCE__) = UART_CLOCKSOURCE_SYSCLK; \ - break; \ - case RCC_USART6CLKSOURCE_LSE: \ - (__CLOCKSOURCE__) = UART_CLOCKSOURCE_LSE; \ - break; \ - default: \ - (__CLOCKSOURCE__) = UART_CLOCKSOURCE_UNDEFINED; \ - break; \ - } \ - } \ - else if ((__HANDLE__)->Instance == UART7) \ - { \ - switch(__HAL_RCC_GET_UART7_SOURCE()) \ - { \ - case RCC_UART7CLKSOURCE_PCLK1: \ - (__CLOCKSOURCE__) = UART_CLOCKSOURCE_PCLK1; \ - break; \ - case RCC_UART7CLKSOURCE_HSI: \ - (__CLOCKSOURCE__) = UART_CLOCKSOURCE_HSI; \ - break; \ - case RCC_UART7CLKSOURCE_SYSCLK: \ - (__CLOCKSOURCE__) = UART_CLOCKSOURCE_SYSCLK; \ - break; \ - case RCC_UART7CLKSOURCE_LSE: \ - (__CLOCKSOURCE__) = UART_CLOCKSOURCE_LSE; \ - break; \ - default: \ - (__CLOCKSOURCE__) = UART_CLOCKSOURCE_UNDEFINED; \ - break; \ - } \ - } \ - else if ((__HANDLE__)->Instance == UART8) \ - { \ - switch(__HAL_RCC_GET_UART8_SOURCE()) \ - { \ - case RCC_UART8CLKSOURCE_PCLK1: \ - (__CLOCKSOURCE__) = UART_CLOCKSOURCE_PCLK1; \ - break; \ - case RCC_UART8CLKSOURCE_HSI: \ - (__CLOCKSOURCE__) = UART_CLOCKSOURCE_HSI; \ - break; \ - case RCC_UART8CLKSOURCE_SYSCLK: \ - (__CLOCKSOURCE__) = UART_CLOCKSOURCE_SYSCLK; \ - break; \ - case RCC_UART8CLKSOURCE_LSE: \ - (__CLOCKSOURCE__) = UART_CLOCKSOURCE_LSE; \ - break; \ - default: \ - (__CLOCKSOURCE__) = UART_CLOCKSOURCE_UNDEFINED; \ - break; \ - } \ - } \ - else \ - { \ - (__CLOCKSOURCE__) = UART_CLOCKSOURCE_UNDEFINED; \ - } \ - } while(0U) - -/** @brief Report the UART mask to apply to retrieve the received data - * according to the word length and to the parity bits activation. - * @note If PCE = 1, the parity bit is not included in the data extracted - * by the reception API(). - * This masking operation is not carried out in the case of - * DMA transfers. - * @param __HANDLE__ specifies the UART Handle. - * @retval None, the mask to apply to UART RDR register is stored in (__HANDLE__)->Mask field. - */ -#define UART_MASK_COMPUTATION(__HANDLE__) \ - do { \ - if ((__HANDLE__)->Init.WordLength == UART_WORDLENGTH_9B) \ - { \ - if ((__HANDLE__)->Init.Parity == UART_PARITY_NONE) \ - { \ - (__HANDLE__)->Mask = 0x01FFU ; \ - } \ - else \ - { \ - (__HANDLE__)->Mask = 0x00FFU ; \ - } \ - } \ - else if ((__HANDLE__)->Init.WordLength == UART_WORDLENGTH_8B) \ - { \ - if ((__HANDLE__)->Init.Parity == UART_PARITY_NONE) \ - { \ - (__HANDLE__)->Mask = 0x00FFU ; \ - } \ - else \ - { \ - (__HANDLE__)->Mask = 0x007FU ; \ - } \ - } \ - else if ((__HANDLE__)->Init.WordLength == UART_WORDLENGTH_7B) \ - { \ - if ((__HANDLE__)->Init.Parity == UART_PARITY_NONE) \ - { \ - (__HANDLE__)->Mask = 0x007FU ; \ - } \ - else \ - { \ - (__HANDLE__)->Mask = 0x003FU ; \ - } \ - } \ - else \ - { \ - (__HANDLE__)->Mask = 0x0000U; \ - } \ -} while(0U) - -/** - * @brief Ensure that UART frame length is valid. - * @param __LENGTH__ UART frame length. - * @retval SET (__LENGTH__ is valid) or RESET (__LENGTH__ is invalid) - */ -#define IS_UART_WORD_LENGTH(__LENGTH__) (((__LENGTH__) == UART_WORDLENGTH_7B) || \ - ((__LENGTH__) == UART_WORDLENGTH_8B) || \ - ((__LENGTH__) == UART_WORDLENGTH_9B)) - -/** - * @brief Ensure that UART wake-up address length is valid. - * @param __ADDRESS__ UART wake-up address length. - * @retval SET (__ADDRESS__ is valid) or RESET (__ADDRESS__ is invalid) - */ -#define IS_UART_ADDRESSLENGTH_DETECT(__ADDRESS__) (((__ADDRESS__) == UART_ADDRESS_DETECT_4B) || \ - ((__ADDRESS__) == UART_ADDRESS_DETECT_7B)) - - -/** - * @} - */ - -/* Private functions ---------------------------------------------------------*/ - -/** - * @} - */ - -/** - * @} - */ - -#ifdef __cplusplus -} -#endif - -#endif /* STM32F7xx_HAL_UART_EX_H */ - -/************************ (C) COPYRIGHT STMicroelectronics *****END OF FILE****/ diff --git a/test_dma/Drivers/STM32F7xx_HAL_Driver/Src/stm32f7xx_hal.c b/test_dma/Drivers/STM32F7xx_HAL_Driver/Src/stm32f7xx_hal.c deleted file mode 100644 index 81a39d7..0000000 --- a/test_dma/Drivers/STM32F7xx_HAL_Driver/Src/stm32f7xx_hal.c +++ /dev/null @@ -1,608 +0,0 @@ -/** - ****************************************************************************** - * @file stm32f7xx_hal.c - * @author MCD Application Team - * @brief HAL module driver. - * This is the common part of the HAL initialization - * - @verbatim - ============================================================================== - ##### How to use this driver ##### - ============================================================================== - [..] - The common HAL driver contains a set of generic and common APIs that can be - used by the PPP peripheral drivers and the user to start using the HAL. - [..] - The HAL contains two APIs' categories: - (+) Common HAL APIs - (+) Services HAL APIs - - @endverbatim - ****************************************************************************** - * @attention - * - *

© Copyright (c) 2017 STMicroelectronics. - * All rights reserved.

- * - * This software component is licensed by ST under BSD 3-Clause license, - * the "License"; You may not use this file except in compliance with the - * License. You may obtain a copy of the License at: - * opensource.org/licenses/BSD-3-Clause - * - ****************************************************************************** - */ - -/* Includes ------------------------------------------------------------------*/ -#include "stm32f7xx_hal.h" - -/** @addtogroup STM32F7xx_HAL_Driver - * @{ - */ - -/** @defgroup HAL HAL - * @brief HAL module driver. - * @{ - */ - -/* Private typedef -----------------------------------------------------------*/ -/* Private define ------------------------------------------------------------*/ -/** @addtogroup HAL_Private_Constants - * @{ - */ -/** - * @brief STM32F7xx HAL Driver version number V1.2.7 - */ -#define __STM32F7xx_HAL_VERSION_MAIN (0x01) /*!< [31:24] main version */ -#define __STM32F7xx_HAL_VERSION_SUB1 (0x02) /*!< [23:16] sub1 version */ -#define __STM32F7xx_HAL_VERSION_SUB2 (0x07) /*!< [15:8] sub2 version */ -#define __STM32F7xx_HAL_VERSION_RC (0x00) /*!< [7:0] release candidate */ -#define __STM32F7xx_HAL_VERSION ((__STM32F7xx_HAL_VERSION_MAIN << 24)\ - |(__STM32F7xx_HAL_VERSION_SUB1 << 16)\ - |(__STM32F7xx_HAL_VERSION_SUB2 << 8 )\ - |(__STM32F7xx_HAL_VERSION_RC)) - -#define IDCODE_DEVID_MASK ((uint32_t)0x00000FFF) -/** - * @} - */ - -/* Private macro -------------------------------------------------------------*/ -/* Exported variables ---------------------------------------------------------*/ -/** @addtogroup HAL_Exported_Variables - * @{ - */ -__IO uint32_t uwTick; -uint32_t uwTickPrio = (1UL << __NVIC_PRIO_BITS); /* Invalid PRIO */ -HAL_TickFreqTypeDef uwTickFreq = HAL_TICK_FREQ_DEFAULT; /* 1KHz */ -/** - * @} - */ - -/* Private function prototypes -----------------------------------------------*/ -/* Private functions ---------------------------------------------------------*/ - -/** @defgroup HAL_Exported_Functions HAL Exported Functions - * @{ - */ - -/** @defgroup HAL_Exported_Functions_Group1 Initialization and de-initialization Functions - * @brief Initialization and de-initialization functions - * -@verbatim - =============================================================================== - ##### Initialization and Configuration functions ##### - =============================================================================== - [..] This section provides functions allowing to: - (+) Initializes the Flash interface the NVIC allocation and initial clock - configuration. It initializes the systick also when timeout is needed - and the backup domain when enabled. - (+) De-Initializes common part of the HAL. - (+) Configure the time base source to have 1ms time base with a dedicated - Tick interrupt priority. - (++) SysTick timer is used by default as source of time base, but user - can eventually implement his proper time base source (a general purpose - timer for example or other time source), keeping in mind that Time base - duration should be kept 1ms since PPP_TIMEOUT_VALUEs are defined and - handled in milliseconds basis. - (++) Time base configuration function (HAL_InitTick ()) is called automatically - at the beginning of the program after reset by HAL_Init() or at any time - when clock is configured, by HAL_RCC_ClockConfig(). - (++) Source of time base is configured to generate interrupts at regular - time intervals. Care must be taken if HAL_Delay() is called from a - peripheral ISR process, the Tick interrupt line must have higher priority - (numerically lower) than the peripheral interrupt. Otherwise the caller - ISR process will be blocked. - (++) functions affecting time base configurations are declared as __weak - to make override possible in case of other implementations in user file. -@endverbatim - * @{ - */ - -/** - * @brief This function is used to initialize the HAL Library; it must be the first - * instruction to be executed in the main program (before to call any other - * HAL function), it performs the following: - * Configure the Flash prefetch, and instruction cache through ART accelerator. - * Configures the SysTick to generate an interrupt each 1 millisecond, - * which is clocked by the HSI (at this stage, the clock is not yet - * configured and thus the system is running from the internal HSI at 16 MHz). - * Set NVIC Group Priority to 4. - * Calls the HAL_MspInit() callback function defined in user file - * "stm32f7xx_hal_msp.c" to do the global low level hardware initialization - * - * @note SysTick is used as time base for the HAL_Delay() function, the application - * need to ensure that the SysTick time base is always set to 1 millisecond - * to have correct HAL operation. - * @retval HAL status - */ -HAL_StatusTypeDef HAL_Init(void) -{ - /* Configure Instruction cache through ART accelerator */ -#if (ART_ACCLERATOR_ENABLE != 0) - __HAL_FLASH_ART_ENABLE(); -#endif /* ART_ACCLERATOR_ENABLE */ - - /* Configure Flash prefetch */ -#if (PREFETCH_ENABLE != 0U) - __HAL_FLASH_PREFETCH_BUFFER_ENABLE(); -#endif /* PREFETCH_ENABLE */ - - /* Set Interrupt Group Priority */ - HAL_NVIC_SetPriorityGrouping(NVIC_PRIORITYGROUP_4); - - /* Use systick as time base source and configure 1ms tick (default clock after Reset is HSI) */ - HAL_InitTick(TICK_INT_PRIORITY); - - /* Init the low level hardware */ - HAL_MspInit(); - - /* Return function status */ - return HAL_OK; -} - -/** - * @brief This function de-Initializes common part of the HAL and stops the systick. - * This function is optional. - * @retval HAL status - */ -HAL_StatusTypeDef HAL_DeInit(void) -{ - /* Reset of all peripherals */ - __HAL_RCC_APB1_FORCE_RESET(); - __HAL_RCC_APB1_RELEASE_RESET(); - - __HAL_RCC_APB2_FORCE_RESET(); - __HAL_RCC_APB2_RELEASE_RESET(); - - __HAL_RCC_AHB1_FORCE_RESET(); - __HAL_RCC_AHB1_RELEASE_RESET(); - - __HAL_RCC_AHB2_FORCE_RESET(); - __HAL_RCC_AHB2_RELEASE_RESET(); - - __HAL_RCC_AHB3_FORCE_RESET(); - __HAL_RCC_AHB3_RELEASE_RESET(); - - /* De-Init the low level hardware */ - HAL_MspDeInit(); - - /* Return function status */ - return HAL_OK; -} - -/** - * @brief Initialize the MSP. - * @retval None - */ -__weak void HAL_MspInit(void) -{ - /* NOTE : This function should not be modified, when the callback is needed, - the HAL_MspInit could be implemented in the user file - */ -} - -/** - * @brief DeInitializes the MSP. - * @retval None - */ -__weak void HAL_MspDeInit(void) -{ - /* NOTE : This function should not be modified, when the callback is needed, - the HAL_MspDeInit could be implemented in the user file - */ -} - -/** - * @brief This function configures the source of the time base. - * The time source is configured to have 1ms time base with a dedicated - * Tick interrupt priority. - * @note This function is called automatically at the beginning of program after - * reset by HAL_Init() or at any time when clock is reconfigured by HAL_RCC_ClockConfig(). - * @note In the default implementation, SysTick timer is the source of time base. - * It is used to generate interrupts at regular time intervals. - * Care must be taken if HAL_Delay() is called from a peripheral ISR process, - * The SysTick interrupt must have higher priority (numerically lower) - * than the peripheral interrupt. Otherwise the caller ISR process will be blocked. - * The function is declared as __weak to be overwritten in case of other - * implementation in user file. - * @param TickPriority Tick interrupt priority. - * @retval HAL status - */ -__weak HAL_StatusTypeDef HAL_InitTick(uint32_t TickPriority) -{ - /* Configure the SysTick to have interrupt in 1ms time basis*/ - if (HAL_SYSTICK_Config(SystemCoreClock / (1000U / uwTickFreq)) > 0U) - { - return HAL_ERROR; - } - - /* Configure the SysTick IRQ priority */ - if (TickPriority < (1UL << __NVIC_PRIO_BITS)) - { - HAL_NVIC_SetPriority(SysTick_IRQn, TickPriority, 0U); - uwTickPrio = TickPriority; - } - else - { - return HAL_ERROR; - } - - /* Return function status */ - return HAL_OK; -} - -/** - * @} - */ - -/** @defgroup HAL_Exported_Functions_Group2 HAL Control functions - * @brief HAL Control functions - * -@verbatim - =============================================================================== - ##### HAL Control functions ##### - =============================================================================== - [..] This section provides functions allowing to: - (+) Provide a tick value in millisecond - (+) Provide a blocking delay in millisecond - (+) Suspend the time base source interrupt - (+) Resume the time base source interrupt - (+) Get the HAL API driver version - (+) Get the device identifier - (+) Get the device revision identifier - (+) Enable/Disable Debug module during SLEEP mode - (+) Enable/Disable Debug module during STOP mode - (+) Enable/Disable Debug module during STANDBY mode - -@endverbatim - * @{ - */ - -/** - * @brief This function is called to increment a global variable "uwTick" - * used as application time base. - * @note In the default implementation, this variable is incremented each 1ms - * in SysTick ISR. - * @note This function is declared as __weak to be overwritten in case of other - * implementations in user file. - * @retval None - */ -__weak void HAL_IncTick(void) -{ - uwTick += uwTickFreq; -} - -/** - * @brief Provides a tick value in millisecond. - * @note This function is declared as __weak to be overwritten in case of other - * implementations in user file. - * @retval tick value - */ -__weak uint32_t HAL_GetTick(void) -{ - return uwTick; -} - -/** - * @brief This function returns a tick priority. - * @retval tick priority - */ -uint32_t HAL_GetTickPrio(void) -{ - return uwTickPrio; -} - -/** - * @brief Set new tick Freq. - * @retval Status - */ -HAL_StatusTypeDef HAL_SetTickFreq(HAL_TickFreqTypeDef Freq) -{ - HAL_StatusTypeDef status = HAL_OK; - assert_param(IS_TICKFREQ(Freq)); - - if (uwTickFreq != Freq) - { - uwTickFreq = Freq; - - /* Apply the new tick Freq */ - status = HAL_InitTick(uwTickPrio); - } - - return status; -} - -/** - * @brief Return tick frequency. - * @retval tick period in Hz - */ -HAL_TickFreqTypeDef HAL_GetTickFreq(void) -{ - return uwTickFreq; -} - -/** - * @brief This function provides minimum delay (in milliseconds) based - * on variable incremented. - * @note In the default implementation , SysTick timer is the source of time base. - * It is used to generate interrupts at regular time intervals where uwTick - * is incremented. - * @note This function is declared as __weak to be overwritten in case of other - * implementations in user file. - * @param Delay specifies the delay time length, in milliseconds. - * @retval None - */ -__weak void HAL_Delay(uint32_t Delay) -{ - uint32_t tickstart = HAL_GetTick(); - uint32_t wait = Delay; - - /* Add a freq to guarantee minimum wait */ - if (wait < HAL_MAX_DELAY) - { - wait += (uint32_t)(uwTickFreq); - } - - while ((HAL_GetTick() - tickstart) < wait) - { - } -} - -/** - * @brief Suspend Tick increment. - * @note In the default implementation , SysTick timer is the source of time base. It is - * used to generate interrupts at regular time intervals. Once HAL_SuspendTick() - * is called, the SysTick interrupt will be disabled and so Tick increment - * is suspended. - * @note This function is declared as __weak to be overwritten in case of other - * implementations in user file. - * @retval None - */ -__weak void HAL_SuspendTick(void) -{ - /* Disable SysTick Interrupt */ - SysTick->CTRL &= ~SysTick_CTRL_TICKINT_Msk; -} - -/** - * @brief Resume Tick increment. - * @note In the default implementation , SysTick timer is the source of time base. It is - * used to generate interrupts at regular time intervals. Once HAL_ResumeTick() - * is called, the SysTick interrupt will be enabled and so Tick increment - * is resumed. - * @note This function is declared as __weak to be overwritten in case of other - * implementations in user file. - * @retval None - */ -__weak void HAL_ResumeTick(void) -{ - /* Enable SysTick Interrupt */ - SysTick->CTRL |= SysTick_CTRL_TICKINT_Msk; -} - -/** - * @brief Returns the HAL revision - * @retval version : 0xXYZR (8bits for each decimal, R for RC) - */ -uint32_t HAL_GetHalVersion(void) -{ - return __STM32F7xx_HAL_VERSION; -} - -/** - * @brief Returns the device revision identifier. - * @retval Device revision identifier - */ -uint32_t HAL_GetREVID(void) -{ - return((DBGMCU->IDCODE) >> 16U); -} - -/** - * @brief Returns the device identifier. - * @retval Device identifier - */ -uint32_t HAL_GetDEVID(void) -{ - return((DBGMCU->IDCODE) & IDCODE_DEVID_MASK); -} - -/** - * @brief Returns first word of the unique device identifier (UID based on 96 bits) - * @retval Device identifier - */ -uint32_t HAL_GetUIDw0(void) -{ - return(READ_REG(*((uint32_t *)UID_BASE))); -} - -/** - * @brief Returns second word of the unique device identifier (UID based on 96 bits) - * @retval Device identifier - */ -uint32_t HAL_GetUIDw1(void) -{ - return(READ_REG(*((uint32_t *)(UID_BASE + 4U)))); -} - -/** - * @brief Returns third word of the unique device identifier (UID based on 96 bits) - * @retval Device identifier - */ -uint32_t HAL_GetUIDw2(void) -{ - return(READ_REG(*((uint32_t *)(UID_BASE + 8U)))); -} - -/** - * @brief Enable the Debug Module during SLEEP mode - * @retval None - */ -void HAL_DBGMCU_EnableDBGSleepMode(void) -{ - SET_BIT(DBGMCU->CR, DBGMCU_CR_DBG_SLEEP); -} - -/** - * @brief Disable the Debug Module during SLEEP mode - * @retval None - */ -void HAL_DBGMCU_DisableDBGSleepMode(void) -{ - CLEAR_BIT(DBGMCU->CR, DBGMCU_CR_DBG_SLEEP); -} - -/** - * @brief Enable the Debug Module during STOP mode - * @retval None - */ -void HAL_DBGMCU_EnableDBGStopMode(void) -{ - SET_BIT(DBGMCU->CR, DBGMCU_CR_DBG_STOP); -} - -/** - * @brief Disable the Debug Module during STOP mode - * @retval None - */ -void HAL_DBGMCU_DisableDBGStopMode(void) -{ - CLEAR_BIT(DBGMCU->CR, DBGMCU_CR_DBG_STOP); -} - -/** - * @brief Enable the Debug Module during STANDBY mode - * @retval None - */ -void HAL_DBGMCU_EnableDBGStandbyMode(void) -{ - SET_BIT(DBGMCU->CR, DBGMCU_CR_DBG_STANDBY); -} - -/** - * @brief Disable the Debug Module during STANDBY mode - * @retval None - */ -void HAL_DBGMCU_DisableDBGStandbyMode(void) -{ - CLEAR_BIT(DBGMCU->CR, DBGMCU_CR_DBG_STANDBY); -} - -/** - * @brief Enables the I/O Compensation Cell. - * @note The I/O compensation cell can be used only when the device supply - * voltage ranges from 2.4 to 3.6 V. - * @retval None - */ -void HAL_EnableCompensationCell(void) -{ - SYSCFG->CMPCR |= SYSCFG_CMPCR_CMP_PD; -} - -/** - * @brief Power-down the I/O Compensation Cell. - * @note The I/O compensation cell can be used only when the device supply - * voltage ranges from 2.4 to 3.6 V. - * @retval None - */ -void HAL_DisableCompensationCell(void) -{ - SYSCFG->CMPCR &= (uint32_t)~((uint32_t)SYSCFG_CMPCR_CMP_PD); -} - -/** - * @brief Enables the FMC Memory Mapping Swapping. - * - * @note SDRAM is accessible at 0x60000000 - * and NOR/RAM is accessible at 0xC0000000 - * - * @retval None - */ -void HAL_EnableFMCMemorySwapping(void) -{ - SYSCFG->MEMRMP |= SYSCFG_MEMRMP_SWP_FMC_0; -} - -/** - * @brief Disables the FMC Memory Mapping Swapping - * - * @note SDRAM is accessible at 0xC0000000 (default mapping) - * and NOR/RAM is accessible at 0x60000000 (default mapping) - * - * @retval None - */ -void HAL_DisableFMCMemorySwapping(void) -{ - - SYSCFG->MEMRMP &= (uint32_t)~((uint32_t)SYSCFG_MEMRMP_SWP_FMC); -} - -#if defined (STM32F765xx) || defined (STM32F767xx) || defined (STM32F769xx) || defined (STM32F777xx) || defined (STM32F779xx) -/** -* @brief Enable the Internal FLASH Bank Swapping. -* -* @note This function can be used only for STM32F77xx/STM32F76xx devices. -* -* @note Flash Bank2 mapped at 0x08000000 (AXI) (aliased at 0x00200000 (TCM)) -* and Flash Bank1 mapped at 0x08100000 (AXI) (aliased at 0x00300000 (TCM)) -* -* @retval None -*/ -void HAL_EnableMemorySwappingBank(void) -{ - SET_BIT(SYSCFG->MEMRMP, SYSCFG_MEMRMP_SWP_FB); -} - -/** -* @brief Disable the Internal FLASH Bank Swapping. -* -* @note This function can be used only for STM32F77xx/STM32F76xx devices. -* -* @note The default state : Flash Bank1 mapped at 0x08000000 (AXI) (aliased at 0x00200000 (TCM)) -* and Flash Bank2 mapped at 0x08100000 (AXI)( aliased at 0x00300000 (TCM)) -* -* @retval None -*/ -void HAL_DisableMemorySwappingBank(void) -{ - CLEAR_BIT(SYSCFG->MEMRMP, SYSCFG_MEMRMP_SWP_FB); -} -#endif /* STM32F767xx || STM32F769xx || STM32F777xx || STM32F779xx */ - -/** - * @} - */ - -/** - * @} - */ - -/** - * @} - */ - -/** - * @} - */ - -/************************ (C) COPYRIGHT STMicroelectronics *****END OF FILE****/ diff --git a/test_dma/Drivers/STM32F7xx_HAL_Driver/Src/stm32f7xx_hal_cortex.c b/test_dma/Drivers/STM32F7xx_HAL_Driver/Src/stm32f7xx_hal_cortex.c deleted file mode 100644 index b0a816a..0000000 --- a/test_dma/Drivers/STM32F7xx_HAL_Driver/Src/stm32f7xx_hal_cortex.c +++ /dev/null @@ -1,505 +0,0 @@ -/** - ****************************************************************************** - * @file stm32f7xx_hal_cortex.c - * @author MCD Application Team - * @brief CORTEX HAL module driver. - * This file provides firmware functions to manage the following - * functionalities of the CORTEX: - * + Initialization and de-initialization functions - * + Peripheral Control functions - * - @verbatim - ============================================================================== - ##### How to use this driver ##### - ============================================================================== - - [..] - *** How to configure Interrupts using CORTEX HAL driver *** - =========================================================== - [..] - This section provides functions allowing to configure the NVIC interrupts (IRQ). - The Cortex-M4 exceptions are managed by CMSIS functions. - - (#) Configure the NVIC Priority Grouping using HAL_NVIC_SetPriorityGrouping() - function according to the following table. - (#) Configure the priority of the selected IRQ Channels using HAL_NVIC_SetPriority(). - (#) Enable the selected IRQ Channels using HAL_NVIC_EnableIRQ(). - (#) please refer to programming manual for details in how to configure priority. - - -@- When the NVIC_PRIORITYGROUP_0 is selected, IRQ preemption is no more possible. - The pending IRQ priority will be managed only by the sub priority. - - -@- IRQ priority order (sorted by highest to lowest priority): - (+@) Lowest preemption priority - (+@) Lowest sub priority - (+@) Lowest hardware priority (IRQ number) - - [..] - *** How to configure Systick using CORTEX HAL driver *** - ======================================================== - [..] - Setup SysTick Timer for time base. - - (+) The HAL_SYSTICK_Config() function calls the SysTick_Config() function which - is a CMSIS function that: - (++) Configures the SysTick Reload register with value passed as function parameter. - (++) Configures the SysTick IRQ priority to the lowest value (0x0F). - (++) Resets the SysTick Counter register. - (++) Configures the SysTick Counter clock source to be Core Clock Source (HCLK). - (++) Enables the SysTick Interrupt. - (++) Starts the SysTick Counter. - - (+) You can change the SysTick Clock source to be HCLK_Div8 by calling the macro - __HAL_CORTEX_SYSTICKCLK_CONFIG(SYSTICK_CLKSOURCE_HCLK_DIV8) just after the - HAL_SYSTICK_Config() function call. The __HAL_CORTEX_SYSTICKCLK_CONFIG() macro is defined - inside the stm32f7xx_hal_cortex.h file. - - (+) You can change the SysTick IRQ priority by calling the - HAL_NVIC_SetPriority(SysTick_IRQn,...) function just after the HAL_SYSTICK_Config() function - call. The HAL_NVIC_SetPriority() call the NVIC_SetPriority() function which is a CMSIS function. - - (+) To adjust the SysTick time base, use the following formula: - - Reload Value = SysTick Counter Clock (Hz) x Desired Time base (s) - (++) Reload Value is the parameter to be passed for HAL_SYSTICK_Config() function - (++) Reload Value should not exceed 0xFFFFFF - - @endverbatim - ****************************************************************************** - * @attention - * - *

© Copyright (c) 2017 STMicroelectronics. - * All rights reserved.

- * - * This software component is licensed by ST under BSD 3-Clause license, - * the "License"; You may not use this file except in compliance with the - * License. You may obtain a copy of the License at: - * opensource.org/licenses/BSD-3-Clause - * - ****************************************************************************** - */ - -/* Includes ------------------------------------------------------------------*/ -#include "stm32f7xx_hal.h" - -/** @addtogroup STM32F7xx_HAL_Driver - * @{ - */ - -/** @defgroup CORTEX CORTEX - * @brief CORTEX HAL module driver - * @{ - */ - -#ifdef HAL_CORTEX_MODULE_ENABLED - -/* Private types -------------------------------------------------------------*/ -/* Private variables ---------------------------------------------------------*/ -/* Private constants ---------------------------------------------------------*/ -/* Private macros ------------------------------------------------------------*/ -/* Private functions ---------------------------------------------------------*/ -/* Exported functions --------------------------------------------------------*/ - -/** @defgroup CORTEX_Exported_Functions CORTEX Exported Functions - * @{ - */ - - -/** @defgroup CORTEX_Exported_Functions_Group1 Initialization and de-initialization functions - * @brief Initialization and Configuration functions - * -@verbatim - ============================================================================== - ##### Initialization and de-initialization functions ##### - ============================================================================== - [..] - This section provides the CORTEX HAL driver functions allowing to configure Interrupts - Systick functionalities - -@endverbatim - * @{ - */ - - -/** - * @brief Sets the priority grouping field (preemption priority and subpriority) - * using the required unlock sequence. - * @param PriorityGroup The priority grouping bits length. - * This parameter can be one of the following values: - * @arg NVIC_PRIORITYGROUP_0: 0 bits for preemption priority - * 4 bits for subpriority - * @arg NVIC_PRIORITYGROUP_1: 1 bits for preemption priority - * 3 bits for subpriority - * @arg NVIC_PRIORITYGROUP_2: 2 bits for preemption priority - * 2 bits for subpriority - * @arg NVIC_PRIORITYGROUP_3: 3 bits for preemption priority - * 1 bits for subpriority - * @arg NVIC_PRIORITYGROUP_4: 4 bits for preemption priority - * 0 bits for subpriority - * @note When the NVIC_PriorityGroup_0 is selected, IRQ preemption is no more possible. - * The pending IRQ priority will be managed only by the subpriority. - * @retval None - */ -void HAL_NVIC_SetPriorityGrouping(uint32_t PriorityGroup) -{ - /* Check the parameters */ - assert_param(IS_NVIC_PRIORITY_GROUP(PriorityGroup)); - - /* Set the PRIGROUP[10:8] bits according to the PriorityGroup parameter value */ - NVIC_SetPriorityGrouping(PriorityGroup); -} - -/** - * @brief Sets the priority of an interrupt. - * @param IRQn External interrupt number. - * This parameter can be an enumerator of IRQn_Type enumeration - * (For the complete STM32 Devices IRQ Channels list, please refer to the appropriate CMSIS device file (stm32f7xxxx.h)) - * @param PreemptPriority The preemption priority for the IRQn channel. - * This parameter can be a value between 0 and 15 - * A lower priority value indicates a higher priority - * @param SubPriority the subpriority level for the IRQ channel. - * This parameter can be a value between 0 and 15 - * A lower priority value indicates a higher priority. - * @retval None - */ -void HAL_NVIC_SetPriority(IRQn_Type IRQn, uint32_t PreemptPriority, uint32_t SubPriority) -{ - uint32_t prioritygroup = 0x00; - - /* Check the parameters */ - assert_param(IS_NVIC_SUB_PRIORITY(SubPriority)); - assert_param(IS_NVIC_PREEMPTION_PRIORITY(PreemptPriority)); - - prioritygroup = NVIC_GetPriorityGrouping(); - - NVIC_SetPriority(IRQn, NVIC_EncodePriority(prioritygroup, PreemptPriority, SubPriority)); -} - -/** - * @brief Enables a device specific interrupt in the NVIC interrupt controller. - * @note To configure interrupts priority correctly, the NVIC_PriorityGroupConfig() - * function should be called before. - * @param IRQn External interrupt number. - * This parameter can be an enumerator of IRQn_Type enumeration - * (For the complete STM32 Devices IRQ Channels list, please refer to the appropriate CMSIS device file (stm32f7xxxx.h)) - * @retval None - */ -void HAL_NVIC_EnableIRQ(IRQn_Type IRQn) -{ - /* Check the parameters */ - assert_param(IS_NVIC_DEVICE_IRQ(IRQn)); - - /* Enable interrupt */ - NVIC_EnableIRQ(IRQn); -} - -/** - * @brief Disables a device specific interrupt in the NVIC interrupt controller. - * @param IRQn External interrupt number. - * This parameter can be an enumerator of IRQn_Type enumeration - * (For the complete STM32 Devices IRQ Channels list, please refer to the appropriate CMSIS device file (stm32f7xxxx.h)) - * @retval None - */ -void HAL_NVIC_DisableIRQ(IRQn_Type IRQn) -{ - /* Check the parameters */ - assert_param(IS_NVIC_DEVICE_IRQ(IRQn)); - - /* Disable interrupt */ - NVIC_DisableIRQ(IRQn); -} - -/** - * @brief Initiates a system reset request to reset the MCU. - * @retval None - */ -void HAL_NVIC_SystemReset(void) -{ - /* System Reset */ - NVIC_SystemReset(); -} - -/** - * @brief Initializes the System Timer and its interrupt, and starts the System Tick Timer. - * Counter is in free running mode to generate periodic interrupts. - * @param TicksNumb Specifies the ticks Number of ticks between two interrupts. - * @retval status: - 0 Function succeeded. - * - 1 Function failed. - */ -uint32_t HAL_SYSTICK_Config(uint32_t TicksNumb) -{ - return SysTick_Config(TicksNumb); -} -/** - * @} - */ - -/** @defgroup CORTEX_Exported_Functions_Group2 Peripheral Control functions - * @brief Cortex control functions - * -@verbatim - ============================================================================== - ##### Peripheral Control functions ##### - ============================================================================== - [..] - This subsection provides a set of functions allowing to control the CORTEX - (NVIC, SYSTICK, MPU) functionalities. - - -@endverbatim - * @{ - */ - -#if (__MPU_PRESENT == 1) -/** - * @brief Disables the MPU - * @retval None - */ -void HAL_MPU_Disable(void) -{ - /* Make sure outstanding transfers are done */ - __DMB(); - - /* Disable fault exceptions */ - SCB->SHCSR &= ~SCB_SHCSR_MEMFAULTENA_Msk; - - /* Disable the MPU and clear the control register*/ - MPU->CTRL = 0; -} - -/** - * @brief Enables the MPU - * @param MPU_Control Specifies the control mode of the MPU during hard fault, - * NMI, FAULTMASK and privileged access to the default memory - * This parameter can be one of the following values: - * @arg MPU_HFNMI_PRIVDEF_NONE - * @arg MPU_HARDFAULT_NMI - * @arg MPU_PRIVILEGED_DEFAULT - * @arg MPU_HFNMI_PRIVDEF - * @retval None - */ -void HAL_MPU_Enable(uint32_t MPU_Control) -{ - /* Enable the MPU */ - MPU->CTRL = MPU_Control | MPU_CTRL_ENABLE_Msk; - - /* Enable fault exceptions */ - SCB->SHCSR |= SCB_SHCSR_MEMFAULTENA_Msk; - - /* Ensure MPU setting take effects */ - __DSB(); - __ISB(); -} - -/** - * @brief Initializes and configures the Region and the memory to be protected. - * @param MPU_Init Pointer to a MPU_Region_InitTypeDef structure that contains - * the initialization and configuration information. - * @retval None - */ -void HAL_MPU_ConfigRegion(MPU_Region_InitTypeDef *MPU_Init) -{ - /* Check the parameters */ - assert_param(IS_MPU_REGION_NUMBER(MPU_Init->Number)); - assert_param(IS_MPU_REGION_ENABLE(MPU_Init->Enable)); - - /* Set the Region number */ - MPU->RNR = MPU_Init->Number; - - if ((MPU_Init->Enable) != RESET) - { - /* Check the parameters */ - assert_param(IS_MPU_INSTRUCTION_ACCESS(MPU_Init->DisableExec)); - assert_param(IS_MPU_REGION_PERMISSION_ATTRIBUTE(MPU_Init->AccessPermission)); - assert_param(IS_MPU_TEX_LEVEL(MPU_Init->TypeExtField)); - assert_param(IS_MPU_ACCESS_SHAREABLE(MPU_Init->IsShareable)); - assert_param(IS_MPU_ACCESS_CACHEABLE(MPU_Init->IsCacheable)); - assert_param(IS_MPU_ACCESS_BUFFERABLE(MPU_Init->IsBufferable)); - assert_param(IS_MPU_SUB_REGION_DISABLE(MPU_Init->SubRegionDisable)); - assert_param(IS_MPU_REGION_SIZE(MPU_Init->Size)); - - MPU->RBAR = MPU_Init->BaseAddress; - MPU->RASR = ((uint32_t)MPU_Init->DisableExec << MPU_RASR_XN_Pos) | - ((uint32_t)MPU_Init->AccessPermission << MPU_RASR_AP_Pos) | - ((uint32_t)MPU_Init->TypeExtField << MPU_RASR_TEX_Pos) | - ((uint32_t)MPU_Init->IsShareable << MPU_RASR_S_Pos) | - ((uint32_t)MPU_Init->IsCacheable << MPU_RASR_C_Pos) | - ((uint32_t)MPU_Init->IsBufferable << MPU_RASR_B_Pos) | - ((uint32_t)MPU_Init->SubRegionDisable << MPU_RASR_SRD_Pos) | - ((uint32_t)MPU_Init->Size << MPU_RASR_SIZE_Pos) | - ((uint32_t)MPU_Init->Enable << MPU_RASR_ENABLE_Pos); - } - else - { - MPU->RBAR = 0x00; - MPU->RASR = 0x00; - } -} -#endif /* __MPU_PRESENT */ - -/** - * @brief Gets the priority grouping field from the NVIC Interrupt Controller. - * @retval Priority grouping field (SCB->AIRCR [10:8] PRIGROUP field) - */ -uint32_t HAL_NVIC_GetPriorityGrouping(void) -{ - /* Get the PRIGROUP[10:8] field value */ - return NVIC_GetPriorityGrouping(); -} - -/** - * @brief Gets the priority of an interrupt. - * @param IRQn External interrupt number. - * This parameter can be an enumerator of IRQn_Type enumeration - * (For the complete STM32 Devices IRQ Channels list, please refer to the appropriate CMSIS device file (stm32f7xxxx.h)) - * @param PriorityGroup the priority grouping bits length. - * This parameter can be one of the following values: - * @arg NVIC_PRIORITYGROUP_0: 0 bits for preemption priority - * 4 bits for subpriority - * @arg NVIC_PRIORITYGROUP_1: 1 bits for preemption priority - * 3 bits for subpriority - * @arg NVIC_PRIORITYGROUP_2: 2 bits for preemption priority - * 2 bits for subpriority - * @arg NVIC_PRIORITYGROUP_3: 3 bits for preemption priority - * 1 bits for subpriority - * @arg NVIC_PRIORITYGROUP_4: 4 bits for preemption priority - * 0 bits for subpriority - * @param pPreemptPriority Pointer on the Preemptive priority value (starting from 0). - * @param pSubPriority Pointer on the Subpriority value (starting from 0). - * @retval None - */ -void HAL_NVIC_GetPriority(IRQn_Type IRQn, uint32_t PriorityGroup, uint32_t *pPreemptPriority, uint32_t *pSubPriority) -{ - /* Check the parameters */ - assert_param(IS_NVIC_PRIORITY_GROUP(PriorityGroup)); - /* Get priority for Cortex-M system or device specific interrupts */ - NVIC_DecodePriority(NVIC_GetPriority(IRQn), PriorityGroup, pPreemptPriority, pSubPriority); -} - -/** - * @brief Sets Pending bit of an external interrupt. - * @param IRQn External interrupt number - * This parameter can be an enumerator of IRQn_Type enumeration - * (For the complete STM32 Devices IRQ Channels list, please refer to the appropriate CMSIS device file (stm32f7xxxx.h)) - * @retval None - */ -void HAL_NVIC_SetPendingIRQ(IRQn_Type IRQn) -{ - /* Check the parameters */ - assert_param(IS_NVIC_DEVICE_IRQ(IRQn)); - - /* Set interrupt pending */ - NVIC_SetPendingIRQ(IRQn); -} - -/** - * @brief Gets Pending Interrupt (reads the pending register in the NVIC - * and returns the pending bit for the specified interrupt). - * @param IRQn External interrupt number. - * This parameter can be an enumerator of IRQn_Type enumeration - * (For the complete STM32 Devices IRQ Channels list, please refer to the appropriate CMSIS device file (stm32f7xxxx.h)) - * @retval status: - 0 Interrupt status is not pending. - * - 1 Interrupt status is pending. - */ -uint32_t HAL_NVIC_GetPendingIRQ(IRQn_Type IRQn) -{ - /* Check the parameters */ - assert_param(IS_NVIC_DEVICE_IRQ(IRQn)); - - /* Return 1 if pending else 0 */ - return NVIC_GetPendingIRQ(IRQn); -} - -/** - * @brief Clears the pending bit of an external interrupt. - * @param IRQn External interrupt number. - * This parameter can be an enumerator of IRQn_Type enumeration - * (For the complete STM32 Devices IRQ Channels list, please refer to the appropriate CMSIS device file (stm32f7xxxx.h)) - * @retval None - */ -void HAL_NVIC_ClearPendingIRQ(IRQn_Type IRQn) -{ - /* Check the parameters */ - assert_param(IS_NVIC_DEVICE_IRQ(IRQn)); - - /* Clear pending interrupt */ - NVIC_ClearPendingIRQ(IRQn); -} - -/** - * @brief Gets active interrupt ( reads the active register in NVIC and returns the active bit). - * @param IRQn External interrupt number - * This parameter can be an enumerator of IRQn_Type enumeration - * (For the complete STM32 Devices IRQ Channels list, please refer to the appropriate CMSIS device file (stm32f7xxxx.h)) - * @retval status: - 0 Interrupt status is not pending. - * - 1 Interrupt status is pending. - */ -uint32_t HAL_NVIC_GetActive(IRQn_Type IRQn) -{ - /* Check the parameters */ - assert_param(IS_NVIC_DEVICE_IRQ(IRQn)); - - /* Return 1 if active else 0 */ - return NVIC_GetActive(IRQn); -} - -/** - * @brief Configures the SysTick clock source. - * @param CLKSource specifies the SysTick clock source. - * This parameter can be one of the following values: - * @arg SYSTICK_CLKSOURCE_HCLK_DIV8: AHB clock divided by 8 selected as SysTick clock source. - * @arg SYSTICK_CLKSOURCE_HCLK: AHB clock selected as SysTick clock source. - * @retval None - */ -void HAL_SYSTICK_CLKSourceConfig(uint32_t CLKSource) -{ - /* Check the parameters */ - assert_param(IS_SYSTICK_CLK_SOURCE(CLKSource)); - if (CLKSource == SYSTICK_CLKSOURCE_HCLK) - { - SysTick->CTRL |= SYSTICK_CLKSOURCE_HCLK; - } - else - { - SysTick->CTRL &= ~SYSTICK_CLKSOURCE_HCLK; - } -} - -/** - * @brief This function handles SYSTICK interrupt request. - * @retval None - */ -void HAL_SYSTICK_IRQHandler(void) -{ - HAL_SYSTICK_Callback(); -} - -/** - * @brief SYSTICK callback. - * @retval None - */ -__weak void HAL_SYSTICK_Callback(void) -{ - /* NOTE : This function Should not be modified, when the callback is needed, - the HAL_SYSTICK_Callback could be implemented in the user file - */ -} - -/** - * @} - */ - -/** - * @} - */ - -#endif /* HAL_CORTEX_MODULE_ENABLED */ -/** - * @} - */ - -/** - * @} - */ - -/************************ (C) COPYRIGHT STMicroelectronics *****END OF FILE****/ diff --git a/test_dma/Drivers/STM32F7xx_HAL_Driver/Src/stm32f7xx_hal_dma.c b/test_dma/Drivers/STM32F7xx_HAL_Driver/Src/stm32f7xx_hal_dma.c deleted file mode 100644 index 6bd09e1..0000000 --- a/test_dma/Drivers/STM32F7xx_HAL_Driver/Src/stm32f7xx_hal_dma.c +++ /dev/null @@ -1,1307 +0,0 @@ -/** - ****************************************************************************** - * @file stm32f7xx_hal_dma.c - * @author MCD Application Team - * @brief DMA HAL module driver. - * - * This file provides firmware functions to manage the following - * functionalities of the Direct Memory Access (DMA) peripheral: - * + Initialization and de-initialization functions - * + IO operation functions - * + Peripheral State and errors functions - @verbatim - ============================================================================== - ##### How to use this driver ##### - ============================================================================== - [..] - (#) Enable and configure the peripheral to be connected to the DMA Stream - (except for internal SRAM/FLASH memories: no initialization is - necessary) please refer to Reference manual for connection between peripherals - and DMA requests. - - (#) For a given Stream, program the required configuration through the following parameters: - Transfer Direction, Source and Destination data formats, - Circular, Normal or peripheral flow control mode, Stream Priority level, - Source and Destination Increment mode, FIFO mode and its Threshold (if needed), - Burst mode for Source and/or Destination (if needed) using HAL_DMA_Init() function. - - -@- Prior to HAL_DMA_Init() the clock must be enabled for DMA through the following macros: - __HAL_RCC_DMA1_CLK_ENABLE() or __HAL_RCC_DMA2_CLK_ENABLE(). - - *** Polling mode IO operation *** - ================================= - [..] - (+) Use HAL_DMA_Start() to start DMA transfer after the configuration of Source - address and destination address and the Length of data to be transferred. - (+) Use HAL_DMA_PollForTransfer() to poll for the end of current transfer, in this - case a fixed Timeout can be configured by User depending from his application. - (+) Use HAL_DMA_Abort() function to abort the current transfer. - - *** Interrupt mode IO operation *** - =================================== - [..] - (+) Configure the DMA interrupt priority using HAL_NVIC_SetPriority() - (+) Enable the DMA IRQ handler using HAL_NVIC_EnableIRQ() - (+) Select Callbacks functions using HAL_DMA_RegisterCallback() - (+) Use HAL_DMA_Start_IT() to start DMA transfer after the configuration of - Source address and destination address and the Length of data to be transferred. In this - case the DMA interrupt is configured - (+) Use HAL_DMA_IRQHandler() called under DMA_IRQHandler() Interrupt subroutine - (+) At the end of data transfer HAL_DMA_IRQHandler() function is executed and user can - add his own function by customization of function pointer XferCpltCallback and - XferErrorCallback (i.e a member of DMA handle structure). - [..] - (#) Use HAL_DMA_GetState() function to return the DMA state and HAL_DMA_GetError() in case of error - detection. - - (#) Use HAL_DMA_Abort_IT() function to abort the current transfer - - -@- In Memory-to-Memory transfer mode, Circular mode is not allowed. - - -@- The FIFO is used mainly to reduce bus usage and to allow data packing/unpacking: it is - possible to set different Data Sizes for the Peripheral and the Memory (ie. you can set - Half-Word data size for the peripheral to access its data register and set Word data size - for the Memory to gain in access time. Each two half words will be packed and written in - a single access to a Word in the Memory). - - -@- When FIFO is disabled, it is not allowed to configure different Data Sizes for Source - and Destination. In this case the Peripheral Data Size will be applied to both Source - and Destination. - - *** DMA HAL driver macros list *** - ============================================= - [..] - Below the list of most used macros in DMA HAL driver. - - (+) __HAL_DMA_ENABLE: Enable the specified DMA Stream. - (+) __HAL_DMA_DISABLE: Disable the specified DMA Stream. - (+) __HAL_DMA_GET_IT_SOURCE: Check whether the specified DMA Stream interrupt has occurred or not. - - [..] - (@) You can refer to the DMA HAL driver header file for more useful macros - - @endverbatim - ****************************************************************************** - * @attention - * - *

© Copyright (c) 2017 STMicroelectronics. - * All rights reserved.

- * - * This software component is licensed by ST under BSD 3-Clause license, - * the "License"; You may not use this file except in compliance with the - * License. You may obtain a copy of the License at: - * opensource.org/licenses/BSD-3-Clause - * - ****************************************************************************** - */ - -/* Includes ------------------------------------------------------------------*/ -#include "stm32f7xx_hal.h" - -/** @addtogroup STM32F7xx_HAL_Driver - * @{ - */ - -/** @defgroup DMA DMA - * @brief DMA HAL module driver - * @{ - */ - -#ifdef HAL_DMA_MODULE_ENABLED - -/* Private types -------------------------------------------------------------*/ -typedef struct -{ - __IO uint32_t ISR; /*!< DMA interrupt status register */ - __IO uint32_t Reserved0; - __IO uint32_t IFCR; /*!< DMA interrupt flag clear register */ -} DMA_Base_Registers; - -/* Private variables ---------------------------------------------------------*/ -/* Private constants ---------------------------------------------------------*/ -/** @addtogroup DMA_Private_Constants - * @{ - */ - #define HAL_TIMEOUT_DMA_ABORT ((uint32_t)5) /* 5 ms */ -/** - * @} - */ -/* Private macros ------------------------------------------------------------*/ -/* Private functions ---------------------------------------------------------*/ -/** @addtogroup DMA_Private_Functions - * @{ - */ -static void DMA_SetConfig(DMA_HandleTypeDef *hdma, uint32_t SrcAddress, uint32_t DstAddress, uint32_t DataLength); -static uint32_t DMA_CalcBaseAndBitshift(DMA_HandleTypeDef *hdma); -static HAL_StatusTypeDef DMA_CheckFifoParam(DMA_HandleTypeDef *hdma); - -/** - * @} - */ - -/* Exported functions ---------------------------------------------------------*/ -/** @addtogroup DMA_Exported_Functions - * @{ - */ - -/** @addtogroup DMA_Exported_Functions_Group1 - * -@verbatim - =============================================================================== - ##### Initialization and de-initialization functions ##### - =============================================================================== - [..] - This section provides functions allowing to initialize the DMA Stream source - and destination addresses, incrementation and data sizes, transfer direction, - circular/normal mode selection, memory-to-memory mode selection and Stream priority value. - [..] - The HAL_DMA_Init() function follows the DMA configuration procedures as described in - reference manual. - -@endverbatim - * @{ - */ - -/** - * @brief Initialize the DMA according to the specified - * parameters in the DMA_InitTypeDef and create the associated handle. - * @param hdma Pointer to a DMA_HandleTypeDef structure that contains - * the configuration information for the specified DMA Stream. - * @retval HAL status - */ -HAL_StatusTypeDef HAL_DMA_Init(DMA_HandleTypeDef *hdma) -{ - uint32_t tmp = 0U; - uint32_t tickstart = HAL_GetTick(); - DMA_Base_Registers *regs; - - /* Check the DMA peripheral state */ - if(hdma == NULL) - { - return HAL_ERROR; - } - - /* Check the parameters */ - assert_param(IS_DMA_STREAM_ALL_INSTANCE(hdma->Instance)); - assert_param(IS_DMA_CHANNEL(hdma->Init.Channel)); - assert_param(IS_DMA_DIRECTION(hdma->Init.Direction)); - assert_param(IS_DMA_PERIPHERAL_INC_STATE(hdma->Init.PeriphInc)); - assert_param(IS_DMA_MEMORY_INC_STATE(hdma->Init.MemInc)); - assert_param(IS_DMA_PERIPHERAL_DATA_SIZE(hdma->Init.PeriphDataAlignment)); - assert_param(IS_DMA_MEMORY_DATA_SIZE(hdma->Init.MemDataAlignment)); - assert_param(IS_DMA_MODE(hdma->Init.Mode)); - assert_param(IS_DMA_PRIORITY(hdma->Init.Priority)); - assert_param(IS_DMA_FIFO_MODE_STATE(hdma->Init.FIFOMode)); - /* Check the memory burst, peripheral burst and FIFO threshold parameters only - when FIFO mode is enabled */ - if(hdma->Init.FIFOMode != DMA_FIFOMODE_DISABLE) - { - assert_param(IS_DMA_FIFO_THRESHOLD(hdma->Init.FIFOThreshold)); - assert_param(IS_DMA_MEMORY_BURST(hdma->Init.MemBurst)); - assert_param(IS_DMA_PERIPHERAL_BURST(hdma->Init.PeriphBurst)); - } - - /* Allocate lock resource */ - __HAL_UNLOCK(hdma); - - /* Change DMA peripheral state */ - hdma->State = HAL_DMA_STATE_BUSY; - - /* Disable the peripheral */ - __HAL_DMA_DISABLE(hdma); - - /* Check if the DMA Stream is effectively disabled */ - while((hdma->Instance->CR & DMA_SxCR_EN) != RESET) - { - /* Check for the Timeout */ - if((HAL_GetTick() - tickstart ) > HAL_TIMEOUT_DMA_ABORT) - { - /* Update error code */ - hdma->ErrorCode = HAL_DMA_ERROR_TIMEOUT; - - /* Change the DMA state */ - hdma->State = HAL_DMA_STATE_TIMEOUT; - - return HAL_TIMEOUT; - } - } - - /* Get the CR register value */ - tmp = hdma->Instance->CR; - - /* Clear CHSEL, MBURST, PBURST, PL, MSIZE, PSIZE, MINC, PINC, CIRC, DIR, CT and DBM bits */ - tmp &= ((uint32_t)~(DMA_SxCR_CHSEL | DMA_SxCR_MBURST | DMA_SxCR_PBURST | \ - DMA_SxCR_PL | DMA_SxCR_MSIZE | DMA_SxCR_PSIZE | \ - DMA_SxCR_MINC | DMA_SxCR_PINC | DMA_SxCR_CIRC | \ - DMA_SxCR_DIR | DMA_SxCR_CT | DMA_SxCR_DBM)); - - /* Prepare the DMA Stream configuration */ - tmp |= hdma->Init.Channel | hdma->Init.Direction | - hdma->Init.PeriphInc | hdma->Init.MemInc | - hdma->Init.PeriphDataAlignment | hdma->Init.MemDataAlignment | - hdma->Init.Mode | hdma->Init.Priority; - - /* the Memory burst and peripheral burst are not used when the FIFO is disabled */ - if(hdma->Init.FIFOMode == DMA_FIFOMODE_ENABLE) - { - /* Get memory burst and peripheral burst */ - tmp |= hdma->Init.MemBurst | hdma->Init.PeriphBurst; - } - - /* Write to DMA Stream CR register */ - hdma->Instance->CR = tmp; - - /* Get the FCR register value */ - tmp = hdma->Instance->FCR; - - /* Clear Direct mode and FIFO threshold bits */ - tmp &= (uint32_t)~(DMA_SxFCR_DMDIS | DMA_SxFCR_FTH); - - /* Prepare the DMA Stream FIFO configuration */ - tmp |= hdma->Init.FIFOMode; - - /* The FIFO threshold is not used when the FIFO mode is disabled */ - if(hdma->Init.FIFOMode == DMA_FIFOMODE_ENABLE) - { - /* Get the FIFO threshold */ - tmp |= hdma->Init.FIFOThreshold; - - /* Check compatibility between FIFO threshold level and size of the memory burst */ - /* for INCR4, INCR8, INCR16 bursts */ - if (hdma->Init.MemBurst != DMA_MBURST_SINGLE) - { - if (DMA_CheckFifoParam(hdma) != HAL_OK) - { - /* Update error code */ - hdma->ErrorCode = HAL_DMA_ERROR_PARAM; - - /* Change the DMA state */ - hdma->State = HAL_DMA_STATE_READY; - - return HAL_ERROR; - } - } - } - - /* Write to DMA Stream FCR */ - hdma->Instance->FCR = tmp; - - /* Initialize StreamBaseAddress and StreamIndex parameters to be used to calculate - DMA steam Base Address needed by HAL_DMA_IRQHandler() and HAL_DMA_PollForTransfer() */ - regs = (DMA_Base_Registers *)DMA_CalcBaseAndBitshift(hdma); - - /* Clear all interrupt flags */ - regs->IFCR = 0x3FU << hdma->StreamIndex; - - /* Initialize the error code */ - hdma->ErrorCode = HAL_DMA_ERROR_NONE; - - /* Initialize the DMA state */ - hdma->State = HAL_DMA_STATE_READY; - - return HAL_OK; -} - -/** - * @brief DeInitializes the DMA peripheral - * @param hdma pointer to a DMA_HandleTypeDef structure that contains - * the configuration information for the specified DMA Stream. - * @retval HAL status - */ -HAL_StatusTypeDef HAL_DMA_DeInit(DMA_HandleTypeDef *hdma) -{ - DMA_Base_Registers *regs; - - /* Check the DMA peripheral state */ - if(hdma == NULL) - { - return HAL_ERROR; - } - - /* Check the DMA peripheral state */ - if(hdma->State == HAL_DMA_STATE_BUSY) - { - /* Return error status */ - return HAL_BUSY; - } - - /* Check the parameters */ - assert_param(IS_DMA_STREAM_ALL_INSTANCE(hdma->Instance)); - - /* Disable the selected DMA Streamx */ - __HAL_DMA_DISABLE(hdma); - - /* Reset DMA Streamx control register */ - hdma->Instance->CR = 0U; - - /* Reset DMA Streamx number of data to transfer register */ - hdma->Instance->NDTR = 0U; - - /* Reset DMA Streamx peripheral address register */ - hdma->Instance->PAR = 0U; - - /* Reset DMA Streamx memory 0 address register */ - hdma->Instance->M0AR = 0U; - - /* Reset DMA Streamx memory 1 address register */ - hdma->Instance->M1AR = 0U; - - /* Reset DMA Streamx FIFO control register */ - hdma->Instance->FCR = (uint32_t)0x00000021U; - - /* Get DMA steam Base Address */ - regs = (DMA_Base_Registers *)DMA_CalcBaseAndBitshift(hdma); - - /* Clear all interrupt flags at correct offset within the register */ - regs->IFCR = 0x3FU << hdma->StreamIndex; - - /* Clean all callbacks */ - hdma->XferCpltCallback = NULL; - hdma->XferHalfCpltCallback = NULL; - hdma->XferM1CpltCallback = NULL; - hdma->XferM1HalfCpltCallback = NULL; - hdma->XferErrorCallback = NULL; - hdma->XferAbortCallback = NULL; - - /* Reset the error code */ - hdma->ErrorCode = HAL_DMA_ERROR_NONE; - - /* Reset the DMA state */ - hdma->State = HAL_DMA_STATE_RESET; - - /* Release Lock */ - __HAL_UNLOCK(hdma); - - return HAL_OK; -} - -/** - * @} - */ - -/** @addtogroup DMA_Exported_Functions_Group2 - * -@verbatim - =============================================================================== - ##### IO operation functions ##### - =============================================================================== - [..] This section provides functions allowing to: - (+) Configure the source, destination address and data length and Start DMA transfer - (+) Configure the source, destination address and data length and - Start DMA transfer with interrupt - (+) Abort DMA transfer - (+) Poll for transfer complete - (+) Handle DMA interrupt request - -@endverbatim - * @{ - */ - -/** - * @brief Starts the DMA Transfer. - * @param hdma pointer to a DMA_HandleTypeDef structure that contains - * the configuration information for the specified DMA Stream. - * @param SrcAddress The source memory Buffer address - * @param DstAddress The destination memory Buffer address - * @param DataLength The length of data to be transferred from source to destination - * @retval HAL status - */ -HAL_StatusTypeDef HAL_DMA_Start(DMA_HandleTypeDef *hdma, uint32_t SrcAddress, uint32_t DstAddress, uint32_t DataLength) -{ - HAL_StatusTypeDef status = HAL_OK; - - /* Check the parameters */ - assert_param(IS_DMA_BUFFER_SIZE(DataLength)); - - /* Process locked */ - __HAL_LOCK(hdma); - - if(HAL_DMA_STATE_READY == hdma->State) - { - /* Change DMA peripheral state */ - hdma->State = HAL_DMA_STATE_BUSY; - - /* Initialize the error code */ - hdma->ErrorCode = HAL_DMA_ERROR_NONE; - - /* Configure the source, destination address and the data length */ - DMA_SetConfig(hdma, SrcAddress, DstAddress, DataLength); - - /* Enable the Peripheral */ - __HAL_DMA_ENABLE(hdma); - } - else - { - /* Process unlocked */ - __HAL_UNLOCK(hdma); - - /* Return error status */ - status = HAL_BUSY; - } - return status; -} - -/** - * @brief Start the DMA Transfer with interrupt enabled. - * @param hdma pointer to a DMA_HandleTypeDef structure that contains - * the configuration information for the specified DMA Stream. - * @param SrcAddress The source memory Buffer address - * @param DstAddress The destination memory Buffer address - * @param DataLength The length of data to be transferred from source to destination - * @retval HAL status - */ -HAL_StatusTypeDef HAL_DMA_Start_IT(DMA_HandleTypeDef *hdma, uint32_t SrcAddress, uint32_t DstAddress, uint32_t DataLength) -{ - HAL_StatusTypeDef status = HAL_OK; - - /* calculate DMA base and stream number */ - DMA_Base_Registers *regs = (DMA_Base_Registers *)hdma->StreamBaseAddress; - - /* Check the parameters */ - assert_param(IS_DMA_BUFFER_SIZE(DataLength)); - - /* Process locked */ - __HAL_LOCK(hdma); - - if(HAL_DMA_STATE_READY == hdma->State) - { - /* Change DMA peripheral state */ - hdma->State = HAL_DMA_STATE_BUSY; - - /* Initialize the error code */ - hdma->ErrorCode = HAL_DMA_ERROR_NONE; - - /* Configure the source, destination address and the data length */ - DMA_SetConfig(hdma, SrcAddress, DstAddress, DataLength); - - /* Clear all interrupt flags at correct offset within the register */ - regs->IFCR = 0x3FU << hdma->StreamIndex; - - /* Enable Common interrupts*/ - hdma->Instance->CR |= DMA_IT_TC | DMA_IT_TE | DMA_IT_DME; - hdma->Instance->FCR |= DMA_IT_FE; - - if(hdma->XferHalfCpltCallback != NULL) - { - hdma->Instance->CR |= DMA_IT_HT; - } - - /* Enable the Peripheral */ - __HAL_DMA_ENABLE(hdma); - } - else - { - /* Process unlocked */ - __HAL_UNLOCK(hdma); - - /* Return error status */ - status = HAL_BUSY; - } - - return status; -} - -/** - * @brief Aborts the DMA Transfer. - * @param hdma pointer to a DMA_HandleTypeDef structure that contains - * the configuration information for the specified DMA Stream. - * - * @note After disabling a DMA Stream, a check for wait until the DMA Stream is - * effectively disabled is added. If a Stream is disabled - * while a data transfer is ongoing, the current data will be transferred - * and the Stream will be effectively disabled only after the transfer of - * this single data is finished. - * @retval HAL status - */ -HAL_StatusTypeDef HAL_DMA_Abort(DMA_HandleTypeDef *hdma) -{ - /* calculate DMA base and stream number */ - DMA_Base_Registers *regs = (DMA_Base_Registers *)hdma->StreamBaseAddress; - - uint32_t tickstart = HAL_GetTick(); - - if(hdma->State != HAL_DMA_STATE_BUSY) - { - hdma->ErrorCode = HAL_DMA_ERROR_NO_XFER; - - /* Process Unlocked */ - __HAL_UNLOCK(hdma); - - return HAL_ERROR; - } - else - { - /* Disable all the transfer interrupts */ - hdma->Instance->CR &= ~(DMA_IT_TC | DMA_IT_TE | DMA_IT_DME); - hdma->Instance->FCR &= ~(DMA_IT_FE); - - if((hdma->XferHalfCpltCallback != NULL) || (hdma->XferM1HalfCpltCallback != NULL)) - { - hdma->Instance->CR &= ~(DMA_IT_HT); - } - - /* Disable the stream */ - __HAL_DMA_DISABLE(hdma); - - /* Check if the DMA Stream is effectively disabled */ - while((hdma->Instance->CR & DMA_SxCR_EN) != RESET) - { - /* Check for the Timeout */ - if((HAL_GetTick() - tickstart ) > HAL_TIMEOUT_DMA_ABORT) - { - /* Update error code */ - hdma->ErrorCode = HAL_DMA_ERROR_TIMEOUT; - - /* Process Unlocked */ - __HAL_UNLOCK(hdma); - - /* Change the DMA state */ - hdma->State = HAL_DMA_STATE_TIMEOUT; - - return HAL_TIMEOUT; - } - } - - /* Clear all interrupt flags at correct offset within the register */ - regs->IFCR = 0x3FU << hdma->StreamIndex; - - /* Process Unlocked */ - __HAL_UNLOCK(hdma); - - /* Change the DMA state*/ - hdma->State = HAL_DMA_STATE_READY; - } - return HAL_OK; -} - -/** - * @brief Aborts the DMA Transfer in Interrupt mode. - * @param hdma pointer to a DMA_HandleTypeDef structure that contains - * the configuration information for the specified DMA Stream. - * @retval HAL status - */ -HAL_StatusTypeDef HAL_DMA_Abort_IT(DMA_HandleTypeDef *hdma) -{ - if(hdma->State != HAL_DMA_STATE_BUSY) - { - hdma->ErrorCode = HAL_DMA_ERROR_NO_XFER; - return HAL_ERROR; - } - else - { - /* Set Abort State */ - hdma->State = HAL_DMA_STATE_ABORT; - - /* Disable the stream */ - __HAL_DMA_DISABLE(hdma); - } - - return HAL_OK; -} - -/** - * @brief Polling for transfer complete. - * @param hdma pointer to a DMA_HandleTypeDef structure that contains - * the configuration information for the specified DMA Stream. - * @param CompleteLevel Specifies the DMA level complete. - * @note The polling mode is kept in this version for legacy. it is recommanded to use the IT model instead. - * This model could be used for debug purpose. - * @note The HAL_DMA_PollForTransfer API cannot be used in circular and double buffering mode (automatic circular mode). - * @param Timeout Timeout duration. - * @retval HAL status - */ -HAL_StatusTypeDef HAL_DMA_PollForTransfer(DMA_HandleTypeDef *hdma, HAL_DMA_LevelCompleteTypeDef CompleteLevel, uint32_t Timeout) -{ - HAL_StatusTypeDef status = HAL_OK; - uint32_t mask_cpltlevel; - uint32_t tickstart = HAL_GetTick(); - uint32_t tmpisr; - - /* calculate DMA base and stream number */ - DMA_Base_Registers *regs; - - if(HAL_DMA_STATE_BUSY != hdma->State) - { - /* No transfer ongoing */ - hdma->ErrorCode = HAL_DMA_ERROR_NO_XFER; - __HAL_UNLOCK(hdma); - return HAL_ERROR; - } - - /* Polling mode not supported in circular mode and double buffering mode */ - if ((hdma->Instance->CR & DMA_SxCR_CIRC) != RESET) - { - hdma->ErrorCode = HAL_DMA_ERROR_NOT_SUPPORTED; - return HAL_ERROR; - } - - /* Get the level transfer complete flag */ - if(CompleteLevel == HAL_DMA_FULL_TRANSFER) - { - /* Transfer Complete flag */ - mask_cpltlevel = DMA_FLAG_TCIF0_4 << hdma->StreamIndex; - } - else - { - /* Half Transfer Complete flag */ - mask_cpltlevel = DMA_FLAG_HTIF0_4 << hdma->StreamIndex; - } - - regs = (DMA_Base_Registers *)hdma->StreamBaseAddress; - tmpisr = regs->ISR; - - while(((tmpisr & mask_cpltlevel) == RESET) && ((hdma->ErrorCode & HAL_DMA_ERROR_TE) == RESET)) - { - /* Check for the Timeout (Not applicable in circular mode)*/ - if(Timeout != HAL_MAX_DELAY) - { - if((Timeout == 0)||((HAL_GetTick() - tickstart ) > Timeout)) - { - /* Update error code */ - hdma->ErrorCode = HAL_DMA_ERROR_TIMEOUT; - - /* Process Unlocked */ - __HAL_UNLOCK(hdma); - - /* Change the DMA state */ - hdma->State = HAL_DMA_STATE_READY; - - return HAL_TIMEOUT; - } - } - - /* Get the ISR register value */ - tmpisr = regs->ISR; - - if((tmpisr & (DMA_FLAG_TEIF0_4 << hdma->StreamIndex)) != RESET) - { - /* Update error code */ - hdma->ErrorCode |= HAL_DMA_ERROR_TE; - - /* Clear the transfer error flag */ - regs->IFCR = DMA_FLAG_TEIF0_4 << hdma->StreamIndex; - } - - if((tmpisr & (DMA_FLAG_FEIF0_4 << hdma->StreamIndex)) != RESET) - { - /* Update error code */ - hdma->ErrorCode |= HAL_DMA_ERROR_FE; - - /* Clear the FIFO error flag */ - regs->IFCR = DMA_FLAG_FEIF0_4 << hdma->StreamIndex; - } - - if((tmpisr & (DMA_FLAG_DMEIF0_4 << hdma->StreamIndex)) != RESET) - { - /* Update error code */ - hdma->ErrorCode |= HAL_DMA_ERROR_DME; - - /* Clear the Direct Mode error flag */ - regs->IFCR = DMA_FLAG_DMEIF0_4 << hdma->StreamIndex; - } - } - - if(hdma->ErrorCode != HAL_DMA_ERROR_NONE) - { - if((hdma->ErrorCode & HAL_DMA_ERROR_TE) != RESET) - { - HAL_DMA_Abort(hdma); - - /* Clear the half transfer and transfer complete flags */ - regs->IFCR = (DMA_FLAG_HTIF0_4 | DMA_FLAG_TCIF0_4) << hdma->StreamIndex; - - /* Process Unlocked */ - __HAL_UNLOCK(hdma); - - /* Change the DMA state */ - hdma->State= HAL_DMA_STATE_READY; - - return HAL_ERROR; - } - } - - /* Get the level transfer complete flag */ - if(CompleteLevel == HAL_DMA_FULL_TRANSFER) - { - /* Clear the half transfer and transfer complete flags */ - regs->IFCR = (DMA_FLAG_HTIF0_4 | DMA_FLAG_TCIF0_4) << hdma->StreamIndex; - - /* Process Unlocked */ - __HAL_UNLOCK(hdma); - - hdma->State = HAL_DMA_STATE_READY; - } - else - { - /* Clear the half transfer flag */ - regs->IFCR = (DMA_FLAG_HTIF0_4) << hdma->StreamIndex; - } - - return status; -} - -/** - * @brief Handles DMA interrupt request. - * @param hdma pointer to a DMA_HandleTypeDef structure that contains - * the configuration information for the specified DMA Stream. - * @retval None - */ -void HAL_DMA_IRQHandler(DMA_HandleTypeDef *hdma) -{ - uint32_t tmpisr; - __IO uint32_t count = 0; - uint32_t timeout = SystemCoreClock / 9600; - - /* calculate DMA base and stream number */ - DMA_Base_Registers *regs = (DMA_Base_Registers *)hdma->StreamBaseAddress; - - tmpisr = regs->ISR; - - /* Transfer Error Interrupt management ***************************************/ - if ((tmpisr & (DMA_FLAG_TEIF0_4 << hdma->StreamIndex)) != RESET) - { - if(__HAL_DMA_GET_IT_SOURCE(hdma, DMA_IT_TE) != RESET) - { - /* Disable the transfer error interrupt */ - hdma->Instance->CR &= ~(DMA_IT_TE); - - /* Clear the transfer error flag */ - regs->IFCR = DMA_FLAG_TEIF0_4 << hdma->StreamIndex; - - /* Update error code */ - hdma->ErrorCode |= HAL_DMA_ERROR_TE; - } - } - /* FIFO Error Interrupt management ******************************************/ - if ((tmpisr & (DMA_FLAG_FEIF0_4 << hdma->StreamIndex)) != RESET) - { - if(__HAL_DMA_GET_IT_SOURCE(hdma, DMA_IT_FE) != RESET) - { - /* Clear the FIFO error flag */ - regs->IFCR = DMA_FLAG_FEIF0_4 << hdma->StreamIndex; - - /* Update error code */ - hdma->ErrorCode |= HAL_DMA_ERROR_FE; - } - } - /* Direct Mode Error Interrupt management ***********************************/ - if ((tmpisr & (DMA_FLAG_DMEIF0_4 << hdma->StreamIndex)) != RESET) - { - if(__HAL_DMA_GET_IT_SOURCE(hdma, DMA_IT_DME) != RESET) - { - /* Clear the direct mode error flag */ - regs->IFCR = DMA_FLAG_DMEIF0_4 << hdma->StreamIndex; - - /* Update error code */ - hdma->ErrorCode |= HAL_DMA_ERROR_DME; - } - } - /* Half Transfer Complete Interrupt management ******************************/ - if ((tmpisr & (DMA_FLAG_HTIF0_4 << hdma->StreamIndex)) != RESET) - { - if(__HAL_DMA_GET_IT_SOURCE(hdma, DMA_IT_HT) != RESET) - { - /* Clear the half transfer complete flag */ - regs->IFCR = DMA_FLAG_HTIF0_4 << hdma->StreamIndex; - - /* Multi_Buffering mode enabled */ - if(((hdma->Instance->CR) & (uint32_t)(DMA_SxCR_DBM)) != RESET) - { - /* Current memory buffer used is Memory 0 */ - if((hdma->Instance->CR & DMA_SxCR_CT) == RESET) - { - if(hdma->XferHalfCpltCallback != NULL) - { - /* Half transfer callback */ - hdma->XferHalfCpltCallback(hdma); - } - } - /* Current memory buffer used is Memory 1 */ - else - { - if(hdma->XferM1HalfCpltCallback != NULL) - { - /* Half transfer callback */ - hdma->XferM1HalfCpltCallback(hdma); - } - } - } - else - { - /* Disable the half transfer interrupt if the DMA mode is not CIRCULAR */ - if((hdma->Instance->CR & DMA_SxCR_CIRC) == RESET) - { - /* Disable the half transfer interrupt */ - hdma->Instance->CR &= ~(DMA_IT_HT); - } - - if(hdma->XferHalfCpltCallback != NULL) - { - /* Half transfer callback */ - hdma->XferHalfCpltCallback(hdma); - } - } - } - } - /* Transfer Complete Interrupt management ***********************************/ - if ((tmpisr & (DMA_FLAG_TCIF0_4 << hdma->StreamIndex)) != RESET) - { - if(__HAL_DMA_GET_IT_SOURCE(hdma, DMA_IT_TC) != RESET) - { - /* Clear the transfer complete flag */ - regs->IFCR = DMA_FLAG_TCIF0_4 << hdma->StreamIndex; - - if(HAL_DMA_STATE_ABORT == hdma->State) - { - /* Disable all the transfer interrupts */ - hdma->Instance->CR &= ~(DMA_IT_TC | DMA_IT_TE | DMA_IT_DME); - hdma->Instance->FCR &= ~(DMA_IT_FE); - - if((hdma->XferHalfCpltCallback != NULL) || (hdma->XferM1HalfCpltCallback != NULL)) - { - hdma->Instance->CR &= ~(DMA_IT_HT); - } - - /* Clear all interrupt flags at correct offset within the register */ - regs->IFCR = 0x3FU << hdma->StreamIndex; - - /* Process Unlocked */ - __HAL_UNLOCK(hdma); - - /* Change the DMA state */ - hdma->State = HAL_DMA_STATE_READY; - - if(hdma->XferAbortCallback != NULL) - { - hdma->XferAbortCallback(hdma); - } - return; - } - - if(((hdma->Instance->CR) & (uint32_t)(DMA_SxCR_DBM)) != RESET) - { - /* Current memory buffer used is Memory 0 */ - if((hdma->Instance->CR & DMA_SxCR_CT) == RESET) - { - if(hdma->XferM1CpltCallback != NULL) - { - /* Transfer complete Callback for memory1 */ - hdma->XferM1CpltCallback(hdma); - } - } - /* Current memory buffer used is Memory 1 */ - else - { - if(hdma->XferCpltCallback != NULL) - { - /* Transfer complete Callback for memory0 */ - hdma->XferCpltCallback(hdma); - } - } - } - /* Disable the transfer complete interrupt if the DMA mode is not CIRCULAR */ - else - { - if((hdma->Instance->CR & DMA_SxCR_CIRC) == RESET) - { - /* Disable the transfer complete interrupt */ - hdma->Instance->CR &= ~(DMA_IT_TC); - - /* Process Unlocked */ - __HAL_UNLOCK(hdma); - - /* Change the DMA state */ - hdma->State = HAL_DMA_STATE_READY; - } - - if(hdma->XferCpltCallback != NULL) - { - /* Transfer complete callback */ - hdma->XferCpltCallback(hdma); - } - } - } - } - - /* manage error case */ - if(hdma->ErrorCode != HAL_DMA_ERROR_NONE) - { - if((hdma->ErrorCode & HAL_DMA_ERROR_TE) != RESET) - { - hdma->State = HAL_DMA_STATE_ABORT; - - /* Disable the stream */ - __HAL_DMA_DISABLE(hdma); - - do - { - if (++count > timeout) - { - break; - } - } - while((hdma->Instance->CR & DMA_SxCR_EN) != RESET); - - /* Process Unlocked */ - __HAL_UNLOCK(hdma); - - /* Change the DMA state */ - hdma->State = HAL_DMA_STATE_READY; - } - - if(hdma->XferErrorCallback != NULL) - { - /* Transfer error callback */ - hdma->XferErrorCallback(hdma); - } - } -} - -/** - * @brief Register callbacks - * @param hdma pointer to a DMA_HandleTypeDef structure that contains - * the configuration information for the specified DMA Stream. - * @param CallbackID User Callback identifer - * a DMA_HandleTypeDef structure as parameter. - * @param pCallback pointer to private callbacsk function which has pointer to - * a DMA_HandleTypeDef structure as parameter. - * @retval HAL status - */ -HAL_StatusTypeDef HAL_DMA_RegisterCallback(DMA_HandleTypeDef *hdma, HAL_DMA_CallbackIDTypeDef CallbackID, void (* pCallback)(DMA_HandleTypeDef *_hdma)) -{ - - HAL_StatusTypeDef status = HAL_OK; - - /* Process locked */ - __HAL_LOCK(hdma); - - if(HAL_DMA_STATE_READY == hdma->State) - { - switch (CallbackID) - { - case HAL_DMA_XFER_CPLT_CB_ID: - hdma->XferCpltCallback = pCallback; - break; - - case HAL_DMA_XFER_HALFCPLT_CB_ID: - hdma->XferHalfCpltCallback = pCallback; - break; - - case HAL_DMA_XFER_M1CPLT_CB_ID: - hdma->XferM1CpltCallback = pCallback; - break; - - case HAL_DMA_XFER_M1HALFCPLT_CB_ID: - hdma->XferM1HalfCpltCallback = pCallback; - break; - - case HAL_DMA_XFER_ERROR_CB_ID: - hdma->XferErrorCallback = pCallback; - break; - - case HAL_DMA_XFER_ABORT_CB_ID: - hdma->XferAbortCallback = pCallback; - break; - - default: - break; - } - } - else - { - /* Return error status */ - status = HAL_ERROR; - } - - /* Release Lock */ - __HAL_UNLOCK(hdma); - - return status; -} - -/** - * @brief UnRegister callbacks - * @param hdma pointer to a DMA_HandleTypeDef structure that contains - * the configuration information for the specified DMA Stream. - * @param CallbackID User Callback identifer - * a HAL_DMA_CallbackIDTypeDef ENUM as parameter. - * @retval HAL status - */ -HAL_StatusTypeDef HAL_DMA_UnRegisterCallback(DMA_HandleTypeDef *hdma, HAL_DMA_CallbackIDTypeDef CallbackID) -{ - HAL_StatusTypeDef status = HAL_OK; - - /* Process locked */ - __HAL_LOCK(hdma); - - if(HAL_DMA_STATE_READY == hdma->State) - { - switch (CallbackID) - { - case HAL_DMA_XFER_CPLT_CB_ID: - hdma->XferCpltCallback = NULL; - break; - - case HAL_DMA_XFER_HALFCPLT_CB_ID: - hdma->XferHalfCpltCallback = NULL; - break; - - case HAL_DMA_XFER_M1CPLT_CB_ID: - hdma->XferM1CpltCallback = NULL; - break; - - case HAL_DMA_XFER_M1HALFCPLT_CB_ID: - hdma->XferM1HalfCpltCallback = NULL; - break; - - case HAL_DMA_XFER_ERROR_CB_ID: - hdma->XferErrorCallback = NULL; - break; - - case HAL_DMA_XFER_ABORT_CB_ID: - hdma->XferAbortCallback = NULL; - break; - - case HAL_DMA_XFER_ALL_CB_ID: - hdma->XferCpltCallback = NULL; - hdma->XferHalfCpltCallback = NULL; - hdma->XferM1CpltCallback = NULL; - hdma->XferM1HalfCpltCallback = NULL; - hdma->XferErrorCallback = NULL; - hdma->XferAbortCallback = NULL; - break; - - default: - status = HAL_ERROR; - break; - } - } - else - { - status = HAL_ERROR; - } - - /* Release Lock */ - __HAL_UNLOCK(hdma); - - return status; -} - -/** - * @} - */ - -/** @addtogroup DMA_Exported_Functions_Group3 - * -@verbatim - =============================================================================== - ##### State and Errors functions ##### - =============================================================================== - [..] - This subsection provides functions allowing to - (+) Check the DMA state - (+) Get error code - -@endverbatim - * @{ - */ - -/** - * @brief Returns the DMA state. - * @param hdma pointer to a DMA_HandleTypeDef structure that contains - * the configuration information for the specified DMA Stream. - * @retval HAL state - */ -HAL_DMA_StateTypeDef HAL_DMA_GetState(DMA_HandleTypeDef *hdma) -{ - return hdma->State; -} - -/** - * @brief Return the DMA error code - * @param hdma pointer to a DMA_HandleTypeDef structure that contains - * the configuration information for the specified DMA Stream. - * @retval DMA Error Code - */ -uint32_t HAL_DMA_GetError(DMA_HandleTypeDef *hdma) -{ - return hdma->ErrorCode; -} - -/** - * @} - */ - -/** - * @} - */ - -/** @addtogroup DMA_Private_Functions - * @{ - */ - -/** - * @brief Sets the DMA Transfer parameter. - * @param hdma pointer to a DMA_HandleTypeDef structure that contains - * the configuration information for the specified DMA Stream. - * @param SrcAddress The source memory Buffer address - * @param DstAddress The destination memory Buffer address - * @param DataLength The length of data to be transferred from source to destination - * @retval HAL status - */ -static void DMA_SetConfig(DMA_HandleTypeDef *hdma, uint32_t SrcAddress, uint32_t DstAddress, uint32_t DataLength) -{ - /* Clear DBM bit */ - hdma->Instance->CR &= (uint32_t)(~DMA_SxCR_DBM); - - /* Configure DMA Stream data length */ - hdma->Instance->NDTR = DataLength; - - /* Memory to Peripheral */ - if((hdma->Init.Direction) == DMA_MEMORY_TO_PERIPH) - { - /* Configure DMA Stream destination address */ - hdma->Instance->PAR = DstAddress; - - /* Configure DMA Stream source address */ - hdma->Instance->M0AR = SrcAddress; - } - /* Peripheral to Memory */ - else - { - /* Configure DMA Stream source address */ - hdma->Instance->PAR = SrcAddress; - - /* Configure DMA Stream destination address */ - hdma->Instance->M0AR = DstAddress; - } -} - -/** - * @brief Returns the DMA Stream base address depending on stream number - * @param hdma pointer to a DMA_HandleTypeDef structure that contains - * the configuration information for the specified DMA Stream. - * @retval Stream base address - */ -static uint32_t DMA_CalcBaseAndBitshift(DMA_HandleTypeDef *hdma) -{ - uint32_t stream_number = (((uint32_t)hdma->Instance & 0xFFU) - 16U) / 24U; - - /* lookup table for necessary bitshift of flags within status registers */ - static const uint8_t flagBitshiftOffset[8U] = {0U, 6U, 16U, 22U, 0U, 6U, 16U, 22U}; - hdma->StreamIndex = flagBitshiftOffset[stream_number]; - - if (stream_number > 3U) - { - /* return pointer to HISR and HIFCR */ - hdma->StreamBaseAddress = (((uint32_t)hdma->Instance & (uint32_t)(~0x3FFU)) + 4U); - } - else - { - /* return pointer to LISR and LIFCR */ - hdma->StreamBaseAddress = ((uint32_t)hdma->Instance & (uint32_t)(~0x3FFU)); - } - - return hdma->StreamBaseAddress; -} - -/** - * @brief Check compatibility between FIFO threshold level and size of the memory burst - * @param hdma pointer to a DMA_HandleTypeDef structure that contains - * the configuration information for the specified DMA Stream. - * @retval HAL status - */ -static HAL_StatusTypeDef DMA_CheckFifoParam(DMA_HandleTypeDef *hdma) -{ - HAL_StatusTypeDef status = HAL_OK; - uint32_t tmp = hdma->Init.FIFOThreshold; - - /* Memory Data size equal to Byte */ - if(hdma->Init.MemDataAlignment == DMA_MDATAALIGN_BYTE) - { - switch (tmp) - { - case DMA_FIFO_THRESHOLD_1QUARTERFULL: - case DMA_FIFO_THRESHOLD_3QUARTERSFULL: - if ((hdma->Init.MemBurst & DMA_SxCR_MBURST_1) == DMA_SxCR_MBURST_1) - { - status = HAL_ERROR; - } - break; - case DMA_FIFO_THRESHOLD_HALFFULL: - if (hdma->Init.MemBurst == DMA_MBURST_INC16) - { - status = HAL_ERROR; - } - break; - case DMA_FIFO_THRESHOLD_FULL: - break; - default: - break; - } - } - - /* Memory Data size equal to Half-Word */ - else if (hdma->Init.MemDataAlignment == DMA_MDATAALIGN_HALFWORD) - { - switch (tmp) - { - case DMA_FIFO_THRESHOLD_1QUARTERFULL: - case DMA_FIFO_THRESHOLD_3QUARTERSFULL: - status = HAL_ERROR; - break; - case DMA_FIFO_THRESHOLD_HALFFULL: - if ((hdma->Init.MemBurst & DMA_SxCR_MBURST_1) == DMA_SxCR_MBURST_1) - { - status = HAL_ERROR; - } - break; - case DMA_FIFO_THRESHOLD_FULL: - if (hdma->Init.MemBurst == DMA_MBURST_INC16) - { - status = HAL_ERROR; - } - break; - default: - break; - } - } - - /* Memory Data size equal to Word */ - else - { - switch (tmp) - { - case DMA_FIFO_THRESHOLD_1QUARTERFULL: - case DMA_FIFO_THRESHOLD_HALFFULL: - case DMA_FIFO_THRESHOLD_3QUARTERSFULL: - status = HAL_ERROR; - break; - case DMA_FIFO_THRESHOLD_FULL: - if ((hdma->Init.MemBurst & DMA_SxCR_MBURST_1) == DMA_SxCR_MBURST_1) - { - status = HAL_ERROR; - } - break; - default: - break; - } - } - - return status; -} - -/** - * @} - */ - -#endif /* HAL_DMA_MODULE_ENABLED */ -/** - * @} - */ - -/** - * @} - */ - -/************************ (C) COPYRIGHT STMicroelectronics *****END OF FILE****/ diff --git a/test_dma/Drivers/STM32F7xx_HAL_Driver/Src/stm32f7xx_hal_dma_ex.c b/test_dma/Drivers/STM32F7xx_HAL_Driver/Src/stm32f7xx_hal_dma_ex.c deleted file mode 100644 index 0873354..0000000 --- a/test_dma/Drivers/STM32F7xx_HAL_Driver/Src/stm32f7xx_hal_dma_ex.c +++ /dev/null @@ -1,310 +0,0 @@ -/** - ****************************************************************************** - * @file stm32f7xx_hal_dma_ex.c - * @author MCD Application Team - * @brief DMA Extension HAL module driver - * This file provides firmware functions to manage the following - * functionalities of the DMA Extension peripheral: - * + Extended features functions - * - @verbatim - ============================================================================== - ##### How to use this driver ##### - ============================================================================== - [..] - The DMA Extension HAL driver can be used as follows: - (+) Start a multi buffer transfer using the HAL_DMA_MultiBufferStart() function - for polling mode or HAL_DMA_MultiBufferStart_IT() for interrupt mode. - - -@- In Memory-to-Memory transfer mode, Multi (Double) Buffer mode is not allowed. - -@- When Multi (Double) Buffer mode is enabled, the transfer is circular by default. - -@- In Multi (Double) buffer mode, it is possible to update the base address for - the AHB memory port on the fly (DMA_SxM0AR or DMA_SxM1AR) when the stream is enabled. - - @endverbatim - ****************************************************************************** - * @attention - * - *

© Copyright (c) 2017 STMicroelectronics. - * All rights reserved.

- * - * This software component is licensed by ST under BSD 3-Clause license, - * the "License"; You may not use this file except in compliance with the - * License. You may obtain a copy of the License at: - * opensource.org/licenses/BSD-3-Clause - * - ****************************************************************************** - */ - -/* Includes ------------------------------------------------------------------*/ -#include "stm32f7xx_hal.h" - -/** @addtogroup STM32F7xx_HAL_Driver - * @{ - */ - -/** @defgroup DMAEx DMAEx - * @brief DMA Extended HAL module driver - * @{ - */ - -#ifdef HAL_DMA_MODULE_ENABLED - -/* Private types -------------------------------------------------------------*/ -/* Private variables ---------------------------------------------------------*/ -/* Private Constants ---------------------------------------------------------*/ -/* Private macros ------------------------------------------------------------*/ -/* Private functions ---------------------------------------------------------*/ -/** @addtogroup DMAEx_Private_Functions - * @{ - */ - -static void DMA_MultiBufferSetConfig(DMA_HandleTypeDef *hdma, uint32_t SrcAddress, uint32_t DstAddress, uint32_t DataLength); - -/** - * @} - */ - -/* Exported functions ---------------------------------------------------------*/ - -/** @addtogroup DMAEx_Exported_Functions - * @{ - */ - - -/** @addtogroup DMAEx_Exported_Functions_Group1 - * -@verbatim - =============================================================================== - ##### Extended features functions ##### - =============================================================================== - [..] This section provides functions allowing to: - (+) Configure the source, destination address and data length and - Start MultiBuffer DMA transfer - (+) Configure the source, destination address and data length and - Start MultiBuffer DMA transfer with interrupt - (+) Change on the fly the memory0 or memory1 address. - -@endverbatim - * @{ - */ - - -/** - * @brief Starts the multi_buffer DMA Transfer. - * @param hdma pointer to a DMA_HandleTypeDef structure that contains - * the configuration information for the specified DMA Stream. - * @param SrcAddress The source memory Buffer address - * @param DstAddress The destination memory Buffer address - * @param SecondMemAddress The second memory Buffer address in case of multi buffer Transfer - * @param DataLength The length of data to be transferred from source to destination - * @retval HAL status - */ -HAL_StatusTypeDef HAL_DMAEx_MultiBufferStart(DMA_HandleTypeDef *hdma, uint32_t SrcAddress, uint32_t DstAddress, uint32_t SecondMemAddress, uint32_t DataLength) -{ - HAL_StatusTypeDef status = HAL_OK; - - /* Check the parameters */ - assert_param(IS_DMA_BUFFER_SIZE(DataLength)); - - /* Memory-to-memory transfer not supported in double buffering mode */ - if (hdma->Init.Direction == DMA_MEMORY_TO_MEMORY) - { - hdma->ErrorCode = HAL_DMA_ERROR_NOT_SUPPORTED; - status = HAL_ERROR; - } - else - { - /* Process Locked */ - __HAL_LOCK(hdma); - - if(HAL_DMA_STATE_READY == hdma->State) - { - /* Change DMA peripheral state */ - hdma->State = HAL_DMA_STATE_BUSY; - - /* Enable the double buffer mode */ - hdma->Instance->CR |= (uint32_t)DMA_SxCR_DBM; - - /* Configure DMA Stream destination address */ - hdma->Instance->M1AR = SecondMemAddress; - - /* Configure the source, destination address and the data length */ - DMA_MultiBufferSetConfig(hdma, SrcAddress, DstAddress, DataLength); - - /* Enable the peripheral */ - __HAL_DMA_ENABLE(hdma); - } - else - { - /* Return error status */ - status = HAL_BUSY; - } - } - return status; -} - -/** - * @brief Starts the multi_buffer DMA Transfer with interrupt enabled. - * @param hdma pointer to a DMA_HandleTypeDef structure that contains - * the configuration information for the specified DMA Stream. - * @param SrcAddress The source memory Buffer address - * @param DstAddress The destination memory Buffer address - * @param SecondMemAddress The second memory Buffer address in case of multi buffer Transfer - * @param DataLength The length of data to be transferred from source to destination - * @retval HAL status - */ -HAL_StatusTypeDef HAL_DMAEx_MultiBufferStart_IT(DMA_HandleTypeDef *hdma, uint32_t SrcAddress, uint32_t DstAddress, uint32_t SecondMemAddress, uint32_t DataLength) -{ - HAL_StatusTypeDef status = HAL_OK; - - /* Check the parameters */ - assert_param(IS_DMA_BUFFER_SIZE(DataLength)); - - /* Memory-to-memory transfer not supported in double buffering mode */ - if (hdma->Init.Direction == DMA_MEMORY_TO_MEMORY) - { - hdma->ErrorCode = HAL_DMA_ERROR_NOT_SUPPORTED; - return HAL_ERROR; - } - - /* Process locked */ - __HAL_LOCK(hdma); - - if(HAL_DMA_STATE_READY == hdma->State) - { - /* Change DMA peripheral state */ - hdma->State = HAL_DMA_STATE_BUSY; - - /* Initialize the error code */ - hdma->ErrorCode = HAL_DMA_ERROR_NONE; - - /* Enable the Double buffer mode */ - hdma->Instance->CR |= (uint32_t)DMA_SxCR_DBM; - - /* Configure DMA Stream destination address */ - hdma->Instance->M1AR = SecondMemAddress; - - /* Configure the source, destination address and the data length */ - DMA_MultiBufferSetConfig(hdma, SrcAddress, DstAddress, DataLength); - - /* Clear all flags */ - __HAL_DMA_CLEAR_FLAG (hdma, __HAL_DMA_GET_TC_FLAG_INDEX(hdma)); - __HAL_DMA_CLEAR_FLAG (hdma, __HAL_DMA_GET_HT_FLAG_INDEX(hdma)); - __HAL_DMA_CLEAR_FLAG (hdma, __HAL_DMA_GET_TE_FLAG_INDEX(hdma)); - __HAL_DMA_CLEAR_FLAG (hdma, __HAL_DMA_GET_DME_FLAG_INDEX(hdma)); - __HAL_DMA_CLEAR_FLAG (hdma, __HAL_DMA_GET_FE_FLAG_INDEX(hdma)); - - /* Enable Common interrupts*/ - hdma->Instance->CR |= DMA_IT_TC | DMA_IT_TE | DMA_IT_DME; - hdma->Instance->FCR |= DMA_IT_FE; - - if((hdma->XferHalfCpltCallback != NULL) || (hdma->XferM1HalfCpltCallback != NULL)) - { - hdma->Instance->CR |= DMA_IT_HT; - } - - /* Enable the peripheral */ - __HAL_DMA_ENABLE(hdma); - } - else - { - /* Process unlocked */ - __HAL_UNLOCK(hdma); - - /* Return error status */ - status = HAL_BUSY; - } - return status; -} - -/** - * @brief Change the memory0 or memory1 address on the fly. - * @param hdma pointer to a DMA_HandleTypeDef structure that contains - * the configuration information for the specified DMA Stream. - * @param Address The new address - * @param memory the memory to be changed, This parameter can be one of - * the following values: - * MEMORY0 / - * MEMORY1 - * @note The MEMORY0 address can be changed only when the current transfer use - * MEMORY1 and the MEMORY1 address can be changed only when the current - * transfer use MEMORY0. - * @retval HAL status - */ -HAL_StatusTypeDef HAL_DMAEx_ChangeMemory(DMA_HandleTypeDef *hdma, uint32_t Address, HAL_DMA_MemoryTypeDef memory) -{ - if(memory == MEMORY0) - { - /* change the memory0 address */ - hdma->Instance->M0AR = Address; - } - else - { - /* change the memory1 address */ - hdma->Instance->M1AR = Address; - } - - return HAL_OK; -} - -/** - * @} - */ - -/** - * @} - */ - -/** @addtogroup DMAEx_Private_Functions - * @{ - */ - -/** - * @brief Set the DMA Transfer parameter. - * @param hdma pointer to a DMA_HandleTypeDef structure that contains - * the configuration information for the specified DMA Stream. - * @param SrcAddress The source memory Buffer address - * @param DstAddress The destination memory Buffer address - * @param DataLength The length of data to be transferred from source to destination - * @retval HAL status - */ -static void DMA_MultiBufferSetConfig(DMA_HandleTypeDef *hdma, uint32_t SrcAddress, uint32_t DstAddress, uint32_t DataLength) -{ - /* Configure DMA Stream data length */ - hdma->Instance->NDTR = DataLength; - - /* Peripheral to Memory */ - if((hdma->Init.Direction) == DMA_MEMORY_TO_PERIPH) - { - /* Configure DMA Stream destination address */ - hdma->Instance->PAR = DstAddress; - - /* Configure DMA Stream source address */ - hdma->Instance->M0AR = SrcAddress; - } - /* Memory to Peripheral */ - else - { - /* Configure DMA Stream source address */ - hdma->Instance->PAR = SrcAddress; - - /* Configure DMA Stream destination address */ - hdma->Instance->M0AR = DstAddress; - } -} - -/** - * @} - */ - -#endif /* HAL_DMA_MODULE_ENABLED */ -/** - * @} - */ - -/** - * @} - */ - -/************************ (C) COPYRIGHT STMicroelectronics *****END OF FILE****/ diff --git a/test_dma/Drivers/STM32F7xx_HAL_Driver/Src/stm32f7xx_hal_exti.c b/test_dma/Drivers/STM32F7xx_HAL_Driver/Src/stm32f7xx_hal_exti.c deleted file mode 100644 index 07e5353..0000000 --- a/test_dma/Drivers/STM32F7xx_HAL_Driver/Src/stm32f7xx_hal_exti.c +++ /dev/null @@ -1,451 +0,0 @@ -/** - ****************************************************************************** - * @file stm32F7xx_hal_exti.c - * @author MCD Application Team - * @brief EXTI HAL module driver. - * This file provides firmware functions to manage the following - * functionalities of the Extended Interrupts and events controller (EXTI) peripheral: - * + Initialization and de-initialization functions - * + IO operation functions - * - @verbatim - ============================================================================== - ##### EXTI Peripheral features ##### - ============================================================================== - [..] - (+) Each Exti line can be configured within this driver. - - (+) Exti line can be configured in 3 different modes - (++) Interrupt - (++) Event - (++) Both of them - - (+) Configurable Exti lines can be configured with 3 different triggers - (++) Rising - (++) Falling - (++) Both of them - - (+) When set in interrupt mode, configurable Exti lines have two different - interrupts pending registers which allow to distinguish which transition - occurs: - (++) Rising edge pending interrupt - (++) Falling - - (+) Exti lines 0 to 15 are linked to gpio pin number 0 to 15. Gpio port can - be selected through multiplexer. - - ##### How to use this driver ##### - ============================================================================== - [..] - - (#) Configure the EXTI line using HAL_EXTI_SetConfigLine(). - (++) Choose the interrupt line number by setting "Line" member from - EXTI_ConfigTypeDef structure. - (++) Configure the interrupt and/or event mode using "Mode" member from - EXTI_ConfigTypeDef structure. - (++) For configurable lines, configure rising and/or falling trigger - "Trigger" member from EXTI_ConfigTypeDef structure. - (++) For Exti lines linked to gpio, choose gpio port using "GPIOSel" - member from GPIO_InitTypeDef structure. - - (#) Get current Exti configuration of a dedicated line using - HAL_EXTI_GetConfigLine(). - (++) Provide exiting handle as parameter. - (++) Provide pointer on EXTI_ConfigTypeDef structure as second parameter. - - (#) Clear Exti configuration of a dedicated line using HAL_EXTI_GetConfigLine(). - (++) Provide exiting handle as parameter. - - (#) Register callback to treat Exti interrupts using HAL_EXTI_RegisterCallback(). - (++) Provide exiting handle as first parameter. - (++) Provide which callback will be registered using one value from - EXTI_CallbackIDTypeDef. - (++) Provide callback function pointer. - - (#) Get interrupt pending bit using HAL_EXTI_GetPending(). - - (#) Clear interrupt pending bit using HAL_EXTI_GetPending(). - - (#) Generate software interrupt using HAL_EXTI_GenerateSWI(). - - @endverbatim - ****************************************************************************** - * @attention - * - *

© Copyright (c) 2018 STMicroelectronics. - * All rights reserved.

- * - * This software component is licensed by ST under BSD 3-Clause license, - * the "License"; You may not use this file except in compliance with the - * License. You may obtain a copy of the License at: - * opensource.org/licenses/BSD-3-Clause - * - ****************************************************************************** - */ - -/* Includes ------------------------------------------------------------------*/ -#include "stm32f7xx_hal.h" -#include "stm32f7xx_hal_exti.h" - -/** @addtogroup STM32F7xx_HAL_Driver - * @{ - */ - -/** @addtogroup EXTI - * @{ - */ -/** MISRA C:2012 deviation rule has been granted for following rule: - * Rule-18.1_b - Medium: Array `EXTICR' 1st subscript interval [0,7] may be out - * of bounds [0,3] in following API : - * HAL_EXTI_SetConfigLine - * HAL_EXTI_GetConfigLine - * HAL_EXTI_ClearConfigLine - */ - -#ifdef HAL_EXTI_MODULE_ENABLED - -/* Private typedef -----------------------------------------------------------*/ -/* Private defines ------------------------------------------------------------*/ -/** @defgroup EXTI_Private_Constants EXTI Private Constants - * @{ - */ - -/** - * @} - */ - -/* Private macros ------------------------------------------------------------*/ -/* Private variables ---------------------------------------------------------*/ -/* Private function prototypes -----------------------------------------------*/ -/* Exported functions --------------------------------------------------------*/ - -/** @addtogroup EXTI_Exported_Functions - * @{ - */ - -/** @addtogroup EXTI_Exported_Functions_Group1 - * @brief Configuration functions - * -@verbatim - =============================================================================== - ##### Configuration functions ##### - =============================================================================== - -@endverbatim - * @{ - */ - -/** - * @brief Set configuration of a dedicated Exti line. - * @param hexti Exti handle. - * @param pExtiConfig Pointer on EXTI configuration to be set. - * @retval HAL Status. - */ -HAL_StatusTypeDef HAL_EXTI_SetConfigLine(EXTI_HandleTypeDef *hexti, EXTI_ConfigTypeDef *pExtiConfig) -{ - uint32_t regval; - - /* Check null pointer */ - if ((hexti == NULL) || (pExtiConfig == NULL)) - { - return HAL_ERROR; - } - - /* Check parameters */ - assert_param(IS_EXTI_LINE(pExtiConfig->Line)); - assert_param(IS_EXTI_MODE(pExtiConfig->Mode)); - assert_param(IS_EXTI_TRIGGER(pExtiConfig->Trigger)); - - /* Assign line number to handle */ - hexti->Line = pExtiConfig->Line; - - /* Clear EXTI line configuration */ - EXTI->IMR &= ~pExtiConfig->Line; - EXTI->EMR &= ~pExtiConfig->Line; - - /* Select the Mode for the selected external interrupts */ - regval = (uint32_t)EXTI_BASE; - regval += pExtiConfig->Mode; - *(__IO uint32_t *) regval |= pExtiConfig->Line; - - /* Clear Rising Falling edge configuration */ - EXTI->RTSR &= ~pExtiConfig->Line; - EXTI->FTSR &= ~pExtiConfig->Line; - - /* Select the trigger for the selected external interrupts */ - if (pExtiConfig->Trigger == EXTI_TRIGGER_RISING_FALLING) - { - /* Rising Falling edge */ - EXTI->RTSR |= pExtiConfig->Line; - EXTI->FTSR |= pExtiConfig->Line; - } - else - { - regval = (uint32_t)EXTI_BASE; - regval += pExtiConfig->Trigger; - *(__IO uint32_t *) regval |= pExtiConfig->Line; - } - return HAL_OK; -} - -/** - * @brief Get configuration of a dedicated Exti line. - * @param hexti Exti handle. - * @param pExtiConfig Pointer on structure to store Exti configuration. - * @retval HAL Status. - */ -HAL_StatusTypeDef HAL_EXTI_GetConfigLine(EXTI_HandleTypeDef *hexti, EXTI_ConfigTypeDef *pExtiConfig) -{ - /* Check null pointer */ - if ((hexti == NULL) || (pExtiConfig == NULL)) - { - return HAL_ERROR; - } - - /* Check the parameter */ - assert_param(IS_EXTI_LINE(hexti->Line)); - - /* Store handle line number to configuration structure */ - pExtiConfig->Line = hexti->Line; - - /* Get EXTI mode to configiguration structure */ - if ((EXTI->IMR & hexti->Line) == hexti->Line) - { - pExtiConfig->Mode = EXTI_MODE_INTERRUPT; - } - else if ((EXTI->EMR & hexti->Line) == hexti->Line) - { - pExtiConfig->Mode = EXTI_MODE_EVENT; - } - else - { - /* No MODE selected */ - pExtiConfig->Mode = 0x0Bu; - } - - /* Get EXTI Trigger to configiguration structure */ - if ((EXTI->RTSR & hexti->Line) == hexti->Line) - { - if ((EXTI->FTSR & hexti->Line) == hexti->Line) - { - pExtiConfig->Trigger = EXTI_TRIGGER_RISING_FALLING; - } - else - { - pExtiConfig->Trigger = EXTI_TRIGGER_RISING; - } - } - else if ((EXTI->FTSR & hexti->Line) == hexti->Line) - { - pExtiConfig->Trigger = EXTI_TRIGGER_FALLING; - } - else - { - /* No Trigger selected */ - pExtiConfig->Trigger = 0x00u; - } - - return HAL_OK; -} - -/** - * @brief Clear whole configuration of a dedicated Exti line. - * @param hexti Exti handle. - * @retval HAL Status. - */ -HAL_StatusTypeDef HAL_EXTI_ClearConfigLine(EXTI_HandleTypeDef *hexti) -{ - /* Check null pointer */ - if (hexti == NULL) - { - return HAL_ERROR; - } - - /* Check the parameter */ - assert_param(IS_EXTI_LINE(hexti->Line)); - - /* 1] Clear interrupt mode */ - EXTI->IMR = (EXTI->IMR & ~hexti->Line); - - /* 2] Clear event mode */ - EXTI->EMR = (EXTI->EMR & ~hexti->Line); - - /* 3] Clear triggers */ - EXTI->RTSR = (EXTI->RTSR & ~hexti->Line); - EXTI->FTSR = (EXTI->FTSR & ~hexti->Line); - - return HAL_OK; -} - -/** - * @brief Register callback for a dedicated Exti line. - * @param hexti Exti handle. - * @param CallbackID User callback identifier. - * This parameter can be one of @arg @ref EXTI_CallbackIDTypeDef values. - * @param pPendingCbfn function pointer to be stored as callback. - * @retval HAL Status. - */ -HAL_StatusTypeDef HAL_EXTI_RegisterCallback(EXTI_HandleTypeDef *hexti, EXTI_CallbackIDTypeDef CallbackID, void (*pPendingCbfn)(void)) -{ - HAL_StatusTypeDef status = HAL_OK; - - switch (CallbackID) - { - case HAL_EXTI_COMMON_CB_ID: - hexti->PendingCallback = pPendingCbfn; - break; - - default: - status = HAL_ERROR; - break; - } - - return status; -} - -/** - * @brief Store line number as handle private field. - * @param hexti Exti handle. - * @param ExtiLine Exti line number. - * This parameter can be from 0 to @ref EXTI_LINE_NB. - * @retval HAL Status. - */ -HAL_StatusTypeDef HAL_EXTI_GetHandle(EXTI_HandleTypeDef *hexti, uint32_t ExtiLine) -{ - /* Check the parameters */ - assert_param(IS_EXTI_LINE(ExtiLine)); - - /* Check null pointer */ - if (hexti == NULL) - { - return HAL_ERROR; - } - else - { - /* Store line number as handle private field */ - hexti->Line = ExtiLine; - - return HAL_OK; - } -} - -/** - * @} - */ - -/** @addtogroup EXTI_Exported_Functions_Group2 - * @brief EXTI IO functions. - * -@verbatim - =============================================================================== - ##### IO operation functions ##### - =============================================================================== - -@endverbatim - * @{ - */ - -/** - * @brief Handle EXTI interrupt request. - * @param hexti Exti handle. - * @retval none. - */ -void HAL_EXTI_IRQHandler(EXTI_HandleTypeDef *hexti) -{ - __IO uint32_t *regaddr; - uint32_t regval; - - /* Get pending bit */ - regaddr = (&EXTI->PR); - regval = (*regaddr & hexti->Line); - - if (regval != 0x00u) - { - /* Clear pending bit */ - *regaddr = hexti->Line; - - /* Call callback */ - if (hexti->PendingCallback != NULL) - { - hexti->PendingCallback(); - } - } -} - -/** - * @brief Get interrupt pending bit of a dedicated line. - * @param hexti Exti handle. - * @param Edge Specify which pending edge as to be checked. - * This parameter can be one of the following values: - * @arg @ref EXTI_TRIGGER_RISING_FALLING - * This parameter is kept for compatibility with other series. - * @retval 1 if interrupt is pending else 0. - */ -uint32_t HAL_EXTI_GetPending(EXTI_HandleTypeDef *hexti, uint32_t Edge) -{ - __IO uint32_t *regaddr; - uint32_t regval; - - /* Check parameters */ - assert_param(IS_EXTI_LINE(hexti->Line)); - assert_param(IS_EXTI_PENDING_EDGE(Edge)); - - /* Get pending bit */ - regaddr = &EXTI->PR; - - /* return 1 if bit is set else 0 */ - regval = ((*regaddr & hexti->Line) >> POSITION_VAL(hexti->Line)); - - return regval; -} - -/** - * @brief Clear interrupt pending bit of a dedicated line. - * @param hexti Exti handle. - * @param Edge Specify which pending edge as to be clear. - * This parameter can be one of the following values: - * @arg @ref EXTI_TRIGGER_RISING_FALLING - * This parameter is kept for compatibility with other series. - * @retval None. - */ -void HAL_EXTI_ClearPending(EXTI_HandleTypeDef *hexti, uint32_t Edge) -{ - /* Check parameters */ - assert_param(IS_EXTI_LINE(hexti->Line)); - assert_param(IS_EXTI_PENDING_EDGE(Edge)); - - /* Clear Pending bit */ - EXTI->PR = hexti->Line; -} - -/** - * @brief Generate a software interrupt for a dedicated line. - * @param hexti Exti handle. - * @retval None. - */ -void HAL_EXTI_GenerateSWI(EXTI_HandleTypeDef *hexti) -{ - /* Check parameters */ - assert_param(IS_EXTI_LINE(hexti->Line)); - - EXTI->SWIER = hexti->Line; -} - -/** - * @} - */ - -/** - * @} - */ - -#endif /* HAL_EXTI_MODULE_ENABLED */ -/** - * @} - */ - -/** - * @} - */ - -/************************ (C) COPYRIGHT STMicroelectronics *****END OF FILE****/ diff --git a/test_dma/Drivers/STM32F7xx_HAL_Driver/Src/stm32f7xx_hal_flash.c b/test_dma/Drivers/STM32F7xx_HAL_Driver/Src/stm32f7xx_hal_flash.c deleted file mode 100644 index 27fa98c..0000000 --- a/test_dma/Drivers/STM32F7xx_HAL_Driver/Src/stm32f7xx_hal_flash.c +++ /dev/null @@ -1,817 +0,0 @@ -/** - ****************************************************************************** - * @file stm32f7xx_hal_flash.c - * @author MCD Application Team - * @brief FLASH HAL module driver. - * This file provides firmware functions to manage the following - * functionalities of the internal FLASH memory: - * + Program operations functions - * + Memory Control functions - * + Peripheral Errors functions - * - @verbatim - ============================================================================== - ##### FLASH peripheral features ##### - ============================================================================== - - [..] The Flash memory interface manages CPU AHB I-Code and D-Code accesses - to the Flash memory. It implements the erase and program Flash memory operations - and the read and write protection mechanisms. - - [..] The Flash memory interface accelerates code execution with a system of instruction - prefetch and cache lines. - - [..] The FLASH main features are: - (+) Flash memory read operations - (+) Flash memory program/erase operations - (+) Read / write protections - (+) Prefetch on I-Code - (+) 64 cache lines of 128 bits on I-Code - (+) 8 cache lines of 128 bits on D-Code - - ##### How to use this driver ##### - ============================================================================== - [..] - This driver provides functions and macros to configure and program the FLASH - memory of all STM32F7xx devices. - - (#) FLASH Memory IO Programming functions: - (++) Lock and Unlock the FLASH interface using HAL_FLASH_Unlock() and - HAL_FLASH_Lock() functions - (++) Program functions: byte, half word, word and double word - (++) There Two modes of programming : - (+++) Polling mode using HAL_FLASH_Program() function - (+++) Interrupt mode using HAL_FLASH_Program_IT() function - - (#) Interrupts and flags management functions : - (++) Handle FLASH interrupts by calling HAL_FLASH_IRQHandler() - (++) Wait for last FLASH operation according to its status - (++) Get error flag status by calling HAL_SetErrorCode() - [..] - In addition to these functions, this driver includes a set of macros allowing - to handle the following operations: - (+) Set the latency - (+) Enable/Disable the prefetch buffer - (+) Enable/Disable the Instruction cache and the Data cache - (+) Reset the Instruction cache and the Data cache - (+) Enable/Disable the FLASH interrupts - (+) Monitor the FLASH flags status - [..] - (@) For any Flash memory program operation (erase or program), the CPU clock frequency - (HCLK) must be at least 1MHz. - (@) The contents of the Flash memory are not guaranteed if a device reset occurs during - a Flash memory operation. - (@) Any attempt to read the Flash memory while it is being written or erased, causes the - bus to stall. Read operations are processed correctly once the program operation has - completed. This means that code or data fetches cannot be performed while a write/erase - operation is ongoing. - - @endverbatim - ****************************************************************************** - * @attention - * - *

© Copyright (c) 2017 STMicroelectronics. - * All rights reserved.

- * - * This software component is licensed by ST under BSD 3-Clause license, - * the "License"; You may not use this file except in compliance with the - * License. You may obtain a copy of the License at: - * opensource.org/licenses/BSD-3-Clause - * - ****************************************************************************** - */ - -/* Includes ------------------------------------------------------------------*/ -#include "stm32f7xx_hal.h" - -/** @addtogroup STM32F7xx_HAL_Driver - * @{ - */ - -/** @defgroup FLASH FLASH - * @brief FLASH HAL module driver - * @{ - */ - -#ifdef HAL_FLASH_MODULE_ENABLED - -/* Private typedef -----------------------------------------------------------*/ -/* Private define ------------------------------------------------------------*/ -/** @addtogroup FLASH_Private_Constants - * @{ - */ -#define SECTOR_MASK ((uint32_t)0xFFFFFF07U) -#define FLASH_TIMEOUT_VALUE ((uint32_t)50000U)/* 50 s */ -/** - * @} - */ -/* Private macro -------------------------------------------------------------*/ -/* Private variables ---------------------------------------------------------*/ -/** @addtogroup FLASH_Private_Variables - * @{ - */ -/* Variable used for Erase sectors under interruption */ -FLASH_ProcessTypeDef pFlash; -/** - * @} - */ - -/* Private function prototypes -----------------------------------------------*/ -/** @addtogroup FLASH_Private_Functions - * @{ - */ -/* Program operations */ -static void FLASH_Program_DoubleWord(uint32_t Address, uint64_t Data); -static void FLASH_Program_Word(uint32_t Address, uint32_t Data); -static void FLASH_Program_HalfWord(uint32_t Address, uint16_t Data); -static void FLASH_Program_Byte(uint32_t Address, uint8_t Data); -static void FLASH_SetErrorCode(void); - -HAL_StatusTypeDef FLASH_WaitForLastOperation(uint32_t Timeout); -/** - * @} - */ - -/* Exported functions --------------------------------------------------------*/ -/** @defgroup FLASH_Exported_Functions FLASH Exported Functions - * @{ - */ - -/** @defgroup FLASH_Exported_Functions_Group1 Programming operation functions - * @brief Programming operation functions - * -@verbatim - =============================================================================== - ##### Programming operation functions ##### - =============================================================================== - [..] - This subsection provides a set of functions allowing to manage the FLASH - program operations. - -@endverbatim - * @{ - */ - -/** - * @brief Program byte, halfword, word or double word at a specified address - * @param TypeProgram Indicate the way to program at a specified address. - * This parameter can be a value of @ref FLASH_Type_Program - * @param Address specifies the address to be programmed. - * @param Data specifies the data to be programmed - * - * @retval HAL_StatusTypeDef HAL Status - */ -HAL_StatusTypeDef HAL_FLASH_Program(uint32_t TypeProgram, uint32_t Address, uint64_t Data) -{ - HAL_StatusTypeDef status = HAL_ERROR; - - /* Process Locked */ - __HAL_LOCK(&pFlash); - - /* Check the parameters */ - assert_param(IS_FLASH_TYPEPROGRAM(TypeProgram)); - - /* Wait for last operation to be completed */ - status = FLASH_WaitForLastOperation((uint32_t)FLASH_TIMEOUT_VALUE); - - if(status == HAL_OK) - { - switch(TypeProgram) - { - case FLASH_TYPEPROGRAM_BYTE : - { - /*Program byte (8-bit) at a specified address.*/ - FLASH_Program_Byte(Address, (uint8_t) Data); - break; - } - - case FLASH_TYPEPROGRAM_HALFWORD : - { - /*Program halfword (16-bit) at a specified address.*/ - FLASH_Program_HalfWord(Address, (uint16_t) Data); - break; - } - - case FLASH_TYPEPROGRAM_WORD : - { - /*Program word (32-bit) at a specified address.*/ - FLASH_Program_Word(Address, (uint32_t) Data); - break; - } - - case FLASH_TYPEPROGRAM_DOUBLEWORD : - { - /*Program double word (64-bit) at a specified address.*/ - FLASH_Program_DoubleWord(Address, Data); - break; - } - default : - break; - } - /* Wait for last operation to be completed */ - status = FLASH_WaitForLastOperation((uint32_t)FLASH_TIMEOUT_VALUE); - - /* If the program operation is completed, disable the PG Bit */ - FLASH->CR &= (~FLASH_CR_PG); - } - - /* Process Unlocked */ - __HAL_UNLOCK(&pFlash); - - return status; -} - -/** - * @brief Program byte, halfword, word or double word at a specified address with interrupt enabled. - * @param TypeProgram Indicate the way to program at a specified address. - * This parameter can be a value of @ref FLASH_Type_Program - * @param Address specifies the address to be programmed. - * @param Data specifies the data to be programmed - * - * @retval HAL Status - */ -HAL_StatusTypeDef HAL_FLASH_Program_IT(uint32_t TypeProgram, uint32_t Address, uint64_t Data) -{ - HAL_StatusTypeDef status = HAL_OK; - - /* Process Locked */ - __HAL_LOCK(&pFlash); - - /* Check the parameters */ - assert_param(IS_FLASH_TYPEPROGRAM(TypeProgram)); - - /* Enable End of FLASH Operation interrupt */ - __HAL_FLASH_ENABLE_IT(FLASH_IT_EOP); - - /* Enable Error source interrupt */ - __HAL_FLASH_ENABLE_IT(FLASH_IT_ERR); - - /* Clear pending flags (if any) */ - __HAL_FLASH_CLEAR_FLAG(FLASH_FLAG_EOP | FLASH_FLAG_OPERR | FLASH_FLAG_WRPERR |\ - FLASH_FLAG_PGAERR | FLASH_FLAG_PGPERR| FLASH_FLAG_ERSERR); - - pFlash.ProcedureOnGoing = FLASH_PROC_PROGRAM; - pFlash.Address = Address; - - switch(TypeProgram) - { - case FLASH_TYPEPROGRAM_BYTE : - { - /*Program byte (8-bit) at a specified address.*/ - FLASH_Program_Byte(Address, (uint8_t) Data); - break; - } - - case FLASH_TYPEPROGRAM_HALFWORD : - { - /*Program halfword (16-bit) at a specified address.*/ - FLASH_Program_HalfWord(Address, (uint16_t) Data); - break; - } - - case FLASH_TYPEPROGRAM_WORD : - { - /*Program word (32-bit) at a specified address.*/ - FLASH_Program_Word(Address, (uint32_t) Data); - break; - } - - case FLASH_TYPEPROGRAM_DOUBLEWORD : - { - /*Program double word (64-bit) at a specified address.*/ - FLASH_Program_DoubleWord(Address, Data); - break; - } - default : - break; - } - return status; -} - -/** - * @brief This function handles FLASH interrupt request. - * @retval None - */ -void HAL_FLASH_IRQHandler(void) -{ - uint32_t temp = 0; - - /* If the program operation is completed, disable the PG Bit */ - FLASH->CR &= (~FLASH_CR_PG); - - /* If the erase operation is completed, disable the SER Bit */ - FLASH->CR &= (~FLASH_CR_SER); - FLASH->CR &= SECTOR_MASK; - - /* if the erase operation is completed, disable the MER Bit */ - FLASH->CR &= (~FLASH_MER_BIT); - - /* Check FLASH End of Operation flag */ - if(__HAL_FLASH_GET_FLAG(FLASH_FLAG_EOP) != RESET) - { - /* Clear FLASH End of Operation pending bit */ - __HAL_FLASH_CLEAR_FLAG(FLASH_FLAG_EOP); - - switch (pFlash.ProcedureOnGoing) - { - case FLASH_PROC_SECTERASE : - { - /* Nb of sector to erased can be decreased */ - pFlash.NbSectorsToErase--; - - /* Check if there are still sectors to erase */ - if(pFlash.NbSectorsToErase != 0) - { - temp = pFlash.Sector; - /* Indicate user which sector has been erased */ - HAL_FLASH_EndOfOperationCallback(temp); - - /* Increment sector number */ - temp = ++pFlash.Sector; - FLASH_Erase_Sector(temp, pFlash.VoltageForErase); - } - else - { - /* No more sectors to Erase, user callback can be called.*/ - /* Reset Sector and stop Erase sectors procedure */ - pFlash.Sector = temp = 0xFFFFFFFFU; - /* FLASH EOP interrupt user callback */ - HAL_FLASH_EndOfOperationCallback(temp); - /* Sector Erase procedure is completed */ - pFlash.ProcedureOnGoing = FLASH_PROC_NONE; - } - break; - } - - case FLASH_PROC_MASSERASE : - { - /* MassErase ended. Return the selected bank : in this product we don't have Banks */ - /* FLASH EOP interrupt user callback */ - HAL_FLASH_EndOfOperationCallback(0); - /* MAss Erase procedure is completed */ - pFlash.ProcedureOnGoing = FLASH_PROC_NONE; - break; - } - - case FLASH_PROC_PROGRAM : - { - /*Program ended. Return the selected address*/ - /* FLASH EOP interrupt user callback */ - HAL_FLASH_EndOfOperationCallback(pFlash.Address); - /* Programming procedure is completed */ - pFlash.ProcedureOnGoing = FLASH_PROC_NONE; - break; - } - default : - break; - } - } - - /* Check FLASH operation error flags */ - if(__HAL_FLASH_GET_FLAG(FLASH_FLAG_ALL_ERRORS) != RESET) - { - switch (pFlash.ProcedureOnGoing) - { - case FLASH_PROC_SECTERASE : - { - /* return the faulty sector */ - temp = pFlash.Sector; - pFlash.Sector = 0xFFFFFFFFU; - break; - } - case FLASH_PROC_MASSERASE : - { - /* No return in case of Mass Erase */ - temp = 0; - break; - } - case FLASH_PROC_PROGRAM : - { - /*return the faulty address*/ - temp = pFlash.Address; - break; - } - default : - break; - } - /*Save the Error code*/ - FLASH_SetErrorCode(); - - /* FLASH error interrupt user callback */ - HAL_FLASH_OperationErrorCallback(temp); - - /*Stop the procedure ongoing */ - pFlash.ProcedureOnGoing = FLASH_PROC_NONE; - } - - if(pFlash.ProcedureOnGoing == FLASH_PROC_NONE) - { - /* Disable End of FLASH Operation interrupt */ - __HAL_FLASH_DISABLE_IT(FLASH_IT_EOP); - - /* Disable Error source interrupt */ - __HAL_FLASH_DISABLE_IT(FLASH_IT_ERR); - - /* Process Unlocked */ - __HAL_UNLOCK(&pFlash); - } - -} - -/** - * @brief FLASH end of operation interrupt callback - * @param ReturnValue The value saved in this parameter depends on the ongoing procedure - * - Sectors Erase: Sector which has been erased (if 0xFFFFFFFF, it means that - * all the selected sectors have been erased) - * - Program : Address which was selected for data program - * - Mass Erase : No return value expected - * @retval None - */ -__weak void HAL_FLASH_EndOfOperationCallback(uint32_t ReturnValue) -{ - /* Prevent unused argument(s) compilation warning */ - UNUSED(ReturnValue); - /* NOTE : This function Should not be modified, when the callback is needed, - the HAL_FLASH_EndOfOperationCallback could be implemented in the user file - */ -} - -/** - * @brief FLASH operation error interrupt callback - * @param ReturnValue The value saved in this parameter depends on the ongoing procedure - * - Sectors Erase: Sector which has been erased (if 0xFFFFFFFF, it means that - * all the selected sectors have been erased) - * - Program : Address which was selected for data program - * - Mass Erase : No return value expected - * @retval None - */ -__weak void HAL_FLASH_OperationErrorCallback(uint32_t ReturnValue) -{ - /* Prevent unused argument(s) compilation warning */ - UNUSED(ReturnValue); - /* NOTE : This function Should not be modified, when the callback is needed, - the HAL_FLASH_OperationErrorCallback could be implemented in the user file - */ -} - -/** - * @} - */ - -/** @defgroup FLASH_Exported_Functions_Group2 Peripheral Control functions - * @brief management functions - * -@verbatim - =============================================================================== - ##### Peripheral Control functions ##### - =============================================================================== - [..] - This subsection provides a set of functions allowing to control the FLASH - memory operations. - -@endverbatim - * @{ - */ - -/** - * @brief Unlock the FLASH control register access - * @retval HAL Status - */ -HAL_StatusTypeDef HAL_FLASH_Unlock(void) -{ - HAL_StatusTypeDef status = HAL_OK; - - if(READ_BIT(FLASH->CR, FLASH_CR_LOCK) != RESET) - { - /* Authorize the FLASH Registers access */ - WRITE_REG(FLASH->KEYR, FLASH_KEY1); - WRITE_REG(FLASH->KEYR, FLASH_KEY2); - - /* Verify Flash is unlocked */ - if(READ_BIT(FLASH->CR, FLASH_CR_LOCK) != RESET) - { - status = HAL_ERROR; - } - } - - return status; -} - -/** - * @brief Locks the FLASH control register access - * @retval HAL Status - */ -HAL_StatusTypeDef HAL_FLASH_Lock(void) -{ - /* Set the LOCK Bit to lock the FLASH Registers access */ - FLASH->CR |= FLASH_CR_LOCK; - - return HAL_OK; -} - -/** - * @brief Unlock the FLASH Option Control Registers access. - * @retval HAL Status - */ -HAL_StatusTypeDef HAL_FLASH_OB_Unlock(void) -{ - if((FLASH->OPTCR & FLASH_OPTCR_OPTLOCK) != RESET) - { - /* Authorizes the Option Byte register programming */ - FLASH->OPTKEYR = FLASH_OPT_KEY1; - FLASH->OPTKEYR = FLASH_OPT_KEY2; - } - else - { - return HAL_ERROR; - } - - return HAL_OK; -} - -/** - * @brief Lock the FLASH Option Control Registers access. - * @retval HAL Status - */ -HAL_StatusTypeDef HAL_FLASH_OB_Lock(void) -{ - /* Set the OPTLOCK Bit to lock the FLASH Option Byte Registers access */ - FLASH->OPTCR |= FLASH_OPTCR_OPTLOCK; - - return HAL_OK; -} - -/** - * @brief Launch the option byte loading. - * @retval HAL Status - */ -HAL_StatusTypeDef HAL_FLASH_OB_Launch(void) -{ - /* Set the OPTSTRT bit in OPTCR register */ - FLASH->OPTCR |= FLASH_OPTCR_OPTSTRT; - - /* Wait for last operation to be completed */ - return(FLASH_WaitForLastOperation((uint32_t)FLASH_TIMEOUT_VALUE)); -} - -/** - * @} - */ - -/** @defgroup FLASH_Exported_Functions_Group3 Peripheral State and Errors functions - * @brief Peripheral Errors functions - * -@verbatim - =============================================================================== - ##### Peripheral Errors functions ##### - =============================================================================== - [..] - This subsection permits to get in run-time Errors of the FLASH peripheral. - -@endverbatim - * @{ - */ - -/** - * @brief Get the specific FLASH error flag. - * @retval FLASH_ErrorCode: The returned value can be: - * @arg FLASH_ERROR_ERS: FLASH Erasing Sequence error flag - * @arg FLASH_ERROR_PGP: FLASH Programming Parallelism error flag - * @arg FLASH_ERROR_PGA: FLASH Programming Alignment error flag - * @arg FLASH_ERROR_WRP: FLASH Write protected error flag - * @arg FLASH_ERROR_OPERATION: FLASH operation Error flag - */ -uint32_t HAL_FLASH_GetError(void) -{ - return pFlash.ErrorCode; -} - -/** - * @} - */ - -/** - * @brief Wait for a FLASH operation to complete. - * @param Timeout maximum flash operationtimeout - * @retval HAL Status - */ -HAL_StatusTypeDef FLASH_WaitForLastOperation(uint32_t Timeout) -{ - uint32_t tickstart = 0; - - /* Clear Error Code */ - pFlash.ErrorCode = HAL_FLASH_ERROR_NONE; - - /* Wait for the FLASH operation to complete by polling on BUSY flag to be reset. - Even if the FLASH operation fails, the BUSY flag will be reset and an error - flag will be set */ - /* Get tick */ - tickstart = HAL_GetTick(); - - while(__HAL_FLASH_GET_FLAG(FLASH_FLAG_BSY) != RESET) - { - if(Timeout != HAL_MAX_DELAY) - { - if((Timeout == 0)||((HAL_GetTick() - tickstart ) > Timeout)) - { - return HAL_TIMEOUT; - } - } - } - - if(__HAL_FLASH_GET_FLAG(FLASH_FLAG_ALL_ERRORS) != RESET) - { - /*Save the error code*/ - FLASH_SetErrorCode(); - return HAL_ERROR; - } - - /* Check FLASH End of Operation flag */ - if (__HAL_FLASH_GET_FLAG(FLASH_FLAG_EOP) != RESET) - { - /* Clear FLASH End of Operation pending bit */ - __HAL_FLASH_CLEAR_FLAG(FLASH_FLAG_EOP); - } - - /* If there is an error flag set */ - return HAL_OK; - -} - -/** - * @brief Program a double word (64-bit) at a specified address. - * @note This function must be used when the device voltage range is from - * 2.7V to 3.6V and an External Vpp is present. - * - * @note If an erase and a program operations are requested simultaneously, - * the erase operation is performed before the program one. - * - * @param Address specifies the address to be programmed. - * @param Data specifies the data to be programmed. - * @retval None - */ -static void FLASH_Program_DoubleWord(uint32_t Address, uint64_t Data) -{ - /* Check the parameters */ - assert_param(IS_FLASH_ADDRESS(Address)); - - /* If the previous operation is completed, proceed to program the new data */ - FLASH->CR &= CR_PSIZE_MASK; - FLASH->CR |= FLASH_PSIZE_DOUBLE_WORD; - FLASH->CR |= FLASH_CR_PG; - - /* Program the double-word */ - *(__IO uint32_t*)Address = (uint32_t)Data; - *(__IO uint32_t*)(Address+4) = (uint32_t)(Data >> 32); - - /* Data synchronous Barrier (DSB) Just after the write operation - This will force the CPU to respect the sequence of instruction (no optimization).*/ - __DSB(); -} - - -/** - * @brief Program word (32-bit) at a specified address. - * @note This function must be used when the device voltage range is from - * 2.7V to 3.6V. - * - * @note If an erase and a program operations are requested simultaneously, - * the erase operation is performed before the program one. - * - * @param Address specifies the address to be programmed. - * @param Data specifies the data to be programmed. - * @retval None - */ -static void FLASH_Program_Word(uint32_t Address, uint32_t Data) -{ - /* Check the parameters */ - assert_param(IS_FLASH_ADDRESS(Address)); - - /* If the previous operation is completed, proceed to program the new data */ - FLASH->CR &= CR_PSIZE_MASK; - FLASH->CR |= FLASH_PSIZE_WORD; - FLASH->CR |= FLASH_CR_PG; - - *(__IO uint32_t*)Address = Data; - - /* Data synchronous Barrier (DSB) Just after the write operation - This will force the CPU to respect the sequence of instruction (no optimization).*/ - __DSB(); -} - -/** - * @brief Program a half-word (16-bit) at a specified address. - * @note This function must be used when the device voltage range is from - * 2.7V to 3.6V. - * - * @note If an erase and a program operations are requested simultaneously, - * the erase operation is performed before the program one. - * - * @param Address specifies the address to be programmed. - * @param Data specifies the data to be programmed. - * @retval None - */ -static void FLASH_Program_HalfWord(uint32_t Address, uint16_t Data) -{ - /* Check the parameters */ - assert_param(IS_FLASH_ADDRESS(Address)); - - /* If the previous operation is completed, proceed to program the new data */ - FLASH->CR &= CR_PSIZE_MASK; - FLASH->CR |= FLASH_PSIZE_HALF_WORD; - FLASH->CR |= FLASH_CR_PG; - - *(__IO uint16_t*)Address = Data; - - /* Data synchronous Barrier (DSB) Just after the write operation - This will force the CPU to respect the sequence of instruction (no optimization).*/ - __DSB(); - -} - -/** - * @brief Program byte (8-bit) at a specified address. - * @note This function must be used when the device voltage range is from - * 2.7V to 3.6V. - * - * @note If an erase and a program operations are requested simultaneously, - * the erase operation is performed before the program one. - * - * @param Address specifies the address to be programmed. - * @param Data specifies the data to be programmed. - * @retval None - */ -static void FLASH_Program_Byte(uint32_t Address, uint8_t Data) -{ - /* Check the parameters */ - assert_param(IS_FLASH_ADDRESS(Address)); - - /* If the previous operation is completed, proceed to program the new data */ - FLASH->CR &= CR_PSIZE_MASK; - FLASH->CR |= FLASH_PSIZE_BYTE; - FLASH->CR |= FLASH_CR_PG; - - *(__IO uint8_t*)Address = Data; - - /* Data synchronous Barrier (DSB) Just after the write operation - This will force the CPU to respect the sequence of instruction (no optimization).*/ - __DSB(); -} - -/** - * @brief Set the specific FLASH error flag. - * @retval None - */ -static void FLASH_SetErrorCode(void) -{ - if(__HAL_FLASH_GET_FLAG(FLASH_FLAG_OPERR) != RESET) - { - pFlash.ErrorCode |= HAL_FLASH_ERROR_OPERATION; - } - - if(__HAL_FLASH_GET_FLAG(FLASH_FLAG_WRPERR) != RESET) - { - pFlash.ErrorCode |= HAL_FLASH_ERROR_WRP; - } - - if(__HAL_FLASH_GET_FLAG(FLASH_FLAG_PGAERR) != RESET) - { - pFlash.ErrorCode |= HAL_FLASH_ERROR_PGA; - } - - if(__HAL_FLASH_GET_FLAG(FLASH_FLAG_PGPERR) != RESET) - { - pFlash.ErrorCode |= HAL_FLASH_ERROR_PGP; - } - - if(__HAL_FLASH_GET_FLAG(FLASH_FLAG_ERSERR) != RESET) - { - pFlash.ErrorCode |= HAL_FLASH_ERROR_ERS; - } - -#if defined (FLASH_OPTCR2_PCROP) - if(__HAL_FLASH_GET_FLAG(FLASH_FLAG_RDERR) != RESET) - { - pFlash.ErrorCode |= HAL_FLASH_ERROR_RD; - } -#endif /* FLASH_OPTCR2_PCROP */ - - /* Clear error programming flags */ - __HAL_FLASH_CLEAR_FLAG(FLASH_FLAG_ALL_ERRORS); -} - -/** - * @} - */ - -#endif /* HAL_FLASH_MODULE_ENABLED */ - -/** - * @} - */ - -/** - * @} - */ - -/************************ (C) COPYRIGHT STMicroelectronics *****END OF FILE****/ diff --git a/test_dma/Drivers/STM32F7xx_HAL_Driver/Src/stm32f7xx_hal_flash_ex.c b/test_dma/Drivers/STM32F7xx_HAL_Driver/Src/stm32f7xx_hal_flash_ex.c deleted file mode 100644 index 33314d4..0000000 --- a/test_dma/Drivers/STM32F7xx_HAL_Driver/Src/stm32f7xx_hal_flash_ex.c +++ /dev/null @@ -1,1122 +0,0 @@ -/** - ****************************************************************************** - * @file stm32f7xx_hal_flash_ex.c - * @author MCD Application Team - * @brief Extended FLASH HAL module driver. - * This file provides firmware functions to manage the following - * functionalities of the FLASH extension peripheral: - * + Extended programming operations functions - * - @verbatim - ============================================================================== - ##### Flash Extension features ##### - ============================================================================== - - [..] Comparing to other previous devices, the FLASH interface for STM32F76xx/STM32F77xx - devices contains the following additional features - - (+) Capacity up to 2 Mbyte with dual bank architecture supporting read-while-write - capability (RWW) - (+) Dual bank memory organization - (+) Dual boot mode - - ##### How to use this driver ##### - ============================================================================== - [..] This driver provides functions to configure and program the FLASH memory - of all STM32F7xx devices. It includes - (#) FLASH Memory Erase functions: - (++) Lock and Unlock the FLASH interface using HAL_FLASH_Unlock() and - HAL_FLASH_Lock() functions - (++) Erase function: Erase sector, erase all sectors - (++) There are two modes of erase : - (+++) Polling Mode using HAL_FLASHEx_Erase() - (+++) Interrupt Mode using HAL_FLASHEx_Erase_IT() - - (#) Option Bytes Programming functions: Use HAL_FLASHEx_OBProgram() to : - (++) Set/Reset the write protection - (++) Set the Read protection Level - (++) Set the BOR level - (++) Program the user Option Bytes - - @endverbatim - ****************************************************************************** - * @attention - * - *

© Copyright (c) 2017 STMicroelectronics. - * All rights reserved.

- * - * This software component is licensed by ST under BSD 3-Clause license, - * the "License"; You may not use this file except in compliance with the - * License. You may obtain a copy of the License at: - * opensource.org/licenses/BSD-3-Clause - * - ****************************************************************************** - */ - -/* Includes ------------------------------------------------------------------*/ -#include "stm32f7xx_hal.h" - -/** @addtogroup STM32F7xx_HAL_Driver - * @{ - */ - -/** @defgroup FLASHEx FLASHEx - * @brief FLASH HAL Extension module driver - * @{ - */ - -#ifdef HAL_FLASH_MODULE_ENABLED - -/* Private typedef -----------------------------------------------------------*/ -/* Private define ------------------------------------------------------------*/ -/** @addtogroup FLASHEx_Private_Constants - * @{ - */ -#define SECTOR_MASK 0xFFFFFF07U -#define FLASH_TIMEOUT_VALUE 50000U/* 50 s */ -/** - * @} - */ - -/* Private macro -------------------------------------------------------------*/ -/* Private variables ---------------------------------------------------------*/ -/** @addtogroup FLASHEx_Private_Variables - * @{ - */ -extern FLASH_ProcessTypeDef pFlash; -/** - * @} - */ - -/* Private function prototypes -----------------------------------------------*/ -/** @addtogroup FLASHEx_Private_Functions - * @{ - */ -/* Option bytes control */ -static HAL_StatusTypeDef FLASH_OB_EnableWRP(uint32_t WRPSector); -static HAL_StatusTypeDef FLASH_OB_DisableWRP(uint32_t WRPSector); -static HAL_StatusTypeDef FLASH_OB_RDP_LevelConfig(uint8_t Level); -static HAL_StatusTypeDef FLASH_OB_BOR_LevelConfig(uint8_t Level); -static HAL_StatusTypeDef FLASH_OB_BootAddressConfig(uint32_t BootOption, uint32_t Address); -static uint32_t FLASH_OB_GetUser(void); -static uint32_t FLASH_OB_GetWRP(void); -static uint8_t FLASH_OB_GetRDP(void); -static uint32_t FLASH_OB_GetBOR(void); -static uint32_t FLASH_OB_GetBootAddress(uint32_t BootOption); - -#if defined (FLASH_OPTCR_nDBANK) -static void FLASH_MassErase(uint8_t VoltageRange, uint32_t Banks); -static HAL_StatusTypeDef FLASH_OB_UserConfig(uint32_t Wwdg, uint32_t Iwdg, uint32_t Stop, uint32_t Stdby, uint32_t Iwdgstop, \ - uint32_t Iwdgstdby, uint32_t NDBank, uint32_t NDBoot); -#else -static void FLASH_MassErase(uint8_t VoltageRange); -static HAL_StatusTypeDef FLASH_OB_UserConfig(uint32_t Wwdg, uint32_t Iwdg, uint32_t Stop, uint32_t Stdby, uint32_t Iwdgstop, uint32_t Iwdgstdby); -#endif /* FLASH_OPTCR_nDBANK */ - -#if defined (FLASH_OPTCR2_PCROP) -static HAL_StatusTypeDef FLASH_OB_PCROP_Config(uint32_t PCROPSector); -static HAL_StatusTypeDef FLASH_OB_PCROP_RDP_Config(uint32_t Pcrop_Rdp); -static uint32_t FLASH_OB_GetPCROP(void); -static uint32_t FLASH_OB_GetPCROPRDP(void); -#endif /* FLASH_OPTCR2_PCROP */ - -extern HAL_StatusTypeDef FLASH_WaitForLastOperation(uint32_t Timeout); -/** - * @} - */ - -/* Exported functions --------------------------------------------------------*/ -/** @defgroup FLASHEx_Exported_Functions FLASHEx Exported Functions - * @{ - */ - -/** @defgroup FLASHEx_Exported_Functions_Group1 Extended IO operation functions - * @brief Extended IO operation functions - * -@verbatim - =============================================================================== - ##### Extended programming operation functions ##### - =============================================================================== - [..] - This subsection provides a set of functions allowing to manage the Extension FLASH - programming operations Operations. - -@endverbatim - * @{ - */ -/** - * @brief Perform a mass erase or erase the specified FLASH memory sectors - * @param[in] pEraseInit pointer to an FLASH_EraseInitTypeDef structure that - * contains the configuration information for the erasing. - * - * @param[out] SectorError pointer to variable that - * contains the configuration information on faulty sector in case of error - * (0xFFFFFFFF means that all the sectors have been correctly erased) - * - * @retval HAL Status - */ -HAL_StatusTypeDef HAL_FLASHEx_Erase(FLASH_EraseInitTypeDef *pEraseInit, uint32_t *SectorError) -{ - HAL_StatusTypeDef status = HAL_ERROR; - uint32_t index = 0; - - /* Process Locked */ - __HAL_LOCK(&pFlash); - - /* Check the parameters */ - assert_param(IS_FLASH_TYPEERASE(pEraseInit->TypeErase)); - - /* Wait for last operation to be completed */ - status = FLASH_WaitForLastOperation((uint32_t)FLASH_TIMEOUT_VALUE); - - if(status == HAL_OK) - { - /*Initialization of SectorError variable*/ - *SectorError = 0xFFFFFFFFU; - - if(pEraseInit->TypeErase == FLASH_TYPEERASE_MASSERASE) - { - /*Mass erase to be done*/ -#if defined (FLASH_OPTCR_nDBANK) - FLASH_MassErase((uint8_t) pEraseInit->VoltageRange, pEraseInit->Banks); -#else - FLASH_MassErase((uint8_t) pEraseInit->VoltageRange); -#endif /* FLASH_OPTCR_nDBANK */ - - /* Wait for last operation to be completed */ - status = FLASH_WaitForLastOperation((uint32_t)FLASH_TIMEOUT_VALUE); - - /* if the erase operation is completed, disable the MER Bit */ - FLASH->CR &= (~FLASH_MER_BIT); - } - else - { - /* Check the parameters */ - assert_param(IS_FLASH_NBSECTORS(pEraseInit->NbSectors + pEraseInit->Sector)); - - /* Erase by sector by sector to be done*/ - for(index = pEraseInit->Sector; index < (pEraseInit->NbSectors + pEraseInit->Sector); index++) - { - FLASH_Erase_Sector(index, (uint8_t) pEraseInit->VoltageRange); - - /* Wait for last operation to be completed */ - status = FLASH_WaitForLastOperation((uint32_t)FLASH_TIMEOUT_VALUE); - - /* If the erase operation is completed, disable the SER Bit and SNB Bits */ - CLEAR_BIT(FLASH->CR, (FLASH_CR_SER | FLASH_CR_SNB)); - - if(status != HAL_OK) - { - /* In case of error, stop erase procedure and return the faulty sector*/ - *SectorError = index; - break; - } - } - } - } - - /* Process Unlocked */ - __HAL_UNLOCK(&pFlash); - - return status; -} - -/** - * @brief Perform a mass erase or erase the specified FLASH memory sectors with interrupt enabled - * @param pEraseInit pointer to an FLASH_EraseInitTypeDef structure that - * contains the configuration information for the erasing. - * - * @retval HAL Status - */ -HAL_StatusTypeDef HAL_FLASHEx_Erase_IT(FLASH_EraseInitTypeDef *pEraseInit) -{ - HAL_StatusTypeDef status = HAL_OK; - - /* Process Locked */ - __HAL_LOCK(&pFlash); - - /* Check the parameters */ - assert_param(IS_FLASH_TYPEERASE(pEraseInit->TypeErase)); - - /* Enable End of FLASH Operation interrupt */ - __HAL_FLASH_ENABLE_IT(FLASH_IT_EOP); - - /* Enable Error source interrupt */ - __HAL_FLASH_ENABLE_IT(FLASH_IT_ERR); - - /* Clear pending flags (if any) */ - __HAL_FLASH_CLEAR_FLAG(FLASH_FLAG_EOP | FLASH_FLAG_OPERR | FLASH_FLAG_WRPERR |\ - FLASH_FLAG_PGAERR | FLASH_FLAG_PGPERR| FLASH_FLAG_ERSERR); - - if(pEraseInit->TypeErase == FLASH_TYPEERASE_MASSERASE) - { - /*Mass erase to be done*/ - pFlash.ProcedureOnGoing = FLASH_PROC_MASSERASE; -#if defined (FLASH_OPTCR_nDBANK) - FLASH_MassErase((uint8_t) pEraseInit->VoltageRange, pEraseInit->Banks); -#else - FLASH_MassErase((uint8_t) pEraseInit->VoltageRange); -#endif /* FLASH_OPTCR_nDBANK */ - } - else - { - /* Erase by sector to be done*/ - - /* Check the parameters */ - assert_param(IS_FLASH_NBSECTORS(pEraseInit->NbSectors + pEraseInit->Sector)); - - pFlash.ProcedureOnGoing = FLASH_PROC_SECTERASE; - pFlash.NbSectorsToErase = pEraseInit->NbSectors; - pFlash.Sector = pEraseInit->Sector; - pFlash.VoltageForErase = (uint8_t)pEraseInit->VoltageRange; - - /*Erase 1st sector and wait for IT*/ - FLASH_Erase_Sector(pEraseInit->Sector, pEraseInit->VoltageRange); - } - - return status; -} - -/** - * @brief Program option bytes - * @param pOBInit pointer to an FLASH_OBInitStruct structure that - * contains the configuration information for the programming. - * - * @retval HAL Status - */ -HAL_StatusTypeDef HAL_FLASHEx_OBProgram(FLASH_OBProgramInitTypeDef *pOBInit) -{ - HAL_StatusTypeDef status = HAL_ERROR; - - /* Process Locked */ - __HAL_LOCK(&pFlash); - - /* Check the parameters */ - assert_param(IS_OPTIONBYTE(pOBInit->OptionType)); - - /* Write protection configuration */ - if((pOBInit->OptionType & OPTIONBYTE_WRP) == OPTIONBYTE_WRP) - { - assert_param(IS_WRPSTATE(pOBInit->WRPState)); - if(pOBInit->WRPState == OB_WRPSTATE_ENABLE) - { - /*Enable of Write protection on the selected Sector*/ - status = FLASH_OB_EnableWRP(pOBInit->WRPSector); - } - else - { - /*Disable of Write protection on the selected Sector*/ - status = FLASH_OB_DisableWRP(pOBInit->WRPSector); - } - } - - /* Read protection configuration */ - if((pOBInit->OptionType & OPTIONBYTE_RDP) == OPTIONBYTE_RDP) - { - status = FLASH_OB_RDP_LevelConfig(pOBInit->RDPLevel); - } - - /* USER configuration */ - if((pOBInit->OptionType & OPTIONBYTE_USER) == OPTIONBYTE_USER) - { -#if defined (FLASH_OPTCR_nDBANK) - status = FLASH_OB_UserConfig(pOBInit->USERConfig & OB_WWDG_SW, - pOBInit->USERConfig & OB_IWDG_SW, - pOBInit->USERConfig & OB_STOP_NO_RST, - pOBInit->USERConfig & OB_STDBY_NO_RST, - pOBInit->USERConfig & OB_IWDG_STOP_ACTIVE, - pOBInit->USERConfig & OB_IWDG_STDBY_ACTIVE, - pOBInit->USERConfig & OB_NDBANK_SINGLE_BANK, - pOBInit->USERConfig & OB_DUAL_BOOT_DISABLE); -#else - status = FLASH_OB_UserConfig(pOBInit->USERConfig & OB_WWDG_SW, - pOBInit->USERConfig & OB_IWDG_SW, - pOBInit->USERConfig & OB_STOP_NO_RST, - pOBInit->USERConfig & OB_STDBY_NO_RST, - pOBInit->USERConfig & OB_IWDG_STOP_ACTIVE, - pOBInit->USERConfig & OB_IWDG_STDBY_ACTIVE); -#endif /* FLASH_OPTCR_nDBANK */ - } - - /* BOR Level configuration */ - if((pOBInit->OptionType & OPTIONBYTE_BOR) == OPTIONBYTE_BOR) - { - status = FLASH_OB_BOR_LevelConfig(pOBInit->BORLevel); - } - - /* Boot 0 Address configuration */ - if((pOBInit->OptionType & OPTIONBYTE_BOOTADDR_0) == OPTIONBYTE_BOOTADDR_0) - { - status = FLASH_OB_BootAddressConfig(OPTIONBYTE_BOOTADDR_0, pOBInit->BootAddr0); - } - - /* Boot 1 Address configuration */ - if((pOBInit->OptionType & OPTIONBYTE_BOOTADDR_1) == OPTIONBYTE_BOOTADDR_1) - { - status = FLASH_OB_BootAddressConfig(OPTIONBYTE_BOOTADDR_1, pOBInit->BootAddr1); - } - -#if defined (FLASH_OPTCR2_PCROP) - /* PCROP configuration */ - if((pOBInit->OptionType & OPTIONBYTE_PCROP) == OPTIONBYTE_PCROP) - { - status = FLASH_OB_PCROP_Config(pOBInit->PCROPSector); - } - - /* PCROP_RDP configuration */ - if((pOBInit->OptionType & OPTIONBYTE_PCROP_RDP) == OPTIONBYTE_PCROP_RDP) - { - status = FLASH_OB_PCROP_RDP_Config(pOBInit->PCROPRdp); - } -#endif /* FLASH_OPTCR2_PCROP */ - - /* Process Unlocked */ - __HAL_UNLOCK(&pFlash); - - return status; -} - -/** - * @brief Get the Option byte configuration - * @param pOBInit pointer to an FLASH_OBInitStruct structure that - * contains the configuration information for the programming. - * - * @retval None - */ -void HAL_FLASHEx_OBGetConfig(FLASH_OBProgramInitTypeDef *pOBInit) -{ - pOBInit->OptionType = OPTIONBYTE_WRP | OPTIONBYTE_RDP | OPTIONBYTE_USER |\ - OPTIONBYTE_BOR | OPTIONBYTE_BOOTADDR_0 | OPTIONBYTE_BOOTADDR_1; - - /*Get WRP*/ - pOBInit->WRPSector = FLASH_OB_GetWRP(); - - /*Get RDP Level*/ - pOBInit->RDPLevel = FLASH_OB_GetRDP(); - - /*Get USER*/ - pOBInit->USERConfig = FLASH_OB_GetUser(); - - /*Get BOR Level*/ - pOBInit->BORLevel = FLASH_OB_GetBOR(); - - /*Get Boot Address when Boot pin = 0 */ - pOBInit->BootAddr0 = FLASH_OB_GetBootAddress(OPTIONBYTE_BOOTADDR_0); - - /*Get Boot Address when Boot pin = 1 */ - pOBInit->BootAddr1 = FLASH_OB_GetBootAddress(OPTIONBYTE_BOOTADDR_1); - -#if defined (FLASH_OPTCR2_PCROP) - /*Get PCROP Sectors */ - pOBInit->PCROPSector = FLASH_OB_GetPCROP(); - - /*Get PCROP_RDP Value */ - pOBInit->PCROPRdp = FLASH_OB_GetPCROPRDP(); -#endif /* FLASH_OPTCR2_PCROP */ -} -/** - * @} - */ - -#if defined (FLASH_OPTCR_nDBANK) -/** - * @brief Full erase of FLASH memory sectors - * @param VoltageRange The device voltage range which defines the erase parallelism. - * This parameter can be one of the following values: - * @arg VOLTAGE_RANGE_1: when the device voltage range is 1.8V to 2.1V, - * the operation will be done by byte (8-bit) - * @arg VOLTAGE_RANGE_2: when the device voltage range is 2.1V to 2.7V, - * the operation will be done by half word (16-bit) - * @arg VOLTAGE_RANGE_3: when the device voltage range is 2.7V to 3.6V, - * the operation will be done by word (32-bit) - * @arg VOLTAGE_RANGE_4: when the device voltage range is 2.7V to 3.6V + External Vpp, - * the operation will be done by double word (64-bit) - * @param Banks Banks to be erased - * This parameter can be one of the following values: - * @arg FLASH_BANK_1: Bank1 to be erased - * @arg FLASH_BANK_2: Bank2 to be erased - * @arg FLASH_BANK_BOTH: Bank1 and Bank2 to be erased - * - * @retval HAL Status - */ -static void FLASH_MassErase(uint8_t VoltageRange, uint32_t Banks) -{ - /* Check the parameters */ - assert_param(IS_VOLTAGERANGE(VoltageRange)); - assert_param(IS_FLASH_BANK(Banks)); - - /* if the previous operation is completed, proceed to erase all sectors */ - FLASH->CR &= CR_PSIZE_MASK; - if(Banks == FLASH_BANK_BOTH) - { - /* bank1 & bank2 will be erased*/ - FLASH->CR |= FLASH_MER_BIT; - } - else if(Banks == FLASH_BANK_2) - { - /*Only bank2 will be erased*/ - FLASH->CR |= FLASH_CR_MER2; - } - else - { - /*Only bank1 will be erased*/ - FLASH->CR |= FLASH_CR_MER1; - } - FLASH->CR |= FLASH_CR_STRT | ((uint32_t)VoltageRange <<8); - /* Data synchronous Barrier (DSB) Just after the write operation - This will force the CPU to respect the sequence of instruction (no optimization).*/ - __DSB(); -} - -/** - * @brief Erase the specified FLASH memory sector - * @param Sector FLASH sector to erase - * The value of this parameter depend on device used within the same series - * @param VoltageRange The device voltage range which defines the erase parallelism. - * This parameter can be one of the following values: - * @arg FLASH_VOLTAGE_RANGE_1: when the device voltage range is 1.8V to 2.1V, - * the operation will be done by byte (8-bit) - * @arg FLASH_VOLTAGE_RANGE_2: when the device voltage range is 2.1V to 2.7V, - * the operation will be done by half word (16-bit) - * @arg FLASH_VOLTAGE_RANGE_3: when the device voltage range is 2.7V to 3.6V, - * the operation will be done by word (32-bit) - * @arg FLASH_VOLTAGE_RANGE_4: when the device voltage range is 2.7V to 3.6V + External Vpp, - * the operation will be done by double word (64-bit) - * - * @retval None - */ -void FLASH_Erase_Sector(uint32_t Sector, uint8_t VoltageRange) -{ - uint32_t tmp_psize = 0; - - /* Check the parameters */ - assert_param(IS_FLASH_SECTOR(Sector)); - assert_param(IS_VOLTAGERANGE(VoltageRange)); - - if(VoltageRange == FLASH_VOLTAGE_RANGE_1) - { - tmp_psize = FLASH_PSIZE_BYTE; - } - else if(VoltageRange == FLASH_VOLTAGE_RANGE_2) - { - tmp_psize = FLASH_PSIZE_HALF_WORD; - } - else if(VoltageRange == FLASH_VOLTAGE_RANGE_3) - { - tmp_psize = FLASH_PSIZE_WORD; - } - else - { - tmp_psize = FLASH_PSIZE_DOUBLE_WORD; - } - - /* Need to add offset of 4 when sector higher than FLASH_SECTOR_11 */ - if(Sector > FLASH_SECTOR_11) - { - Sector += 4; - } - - /* If the previous operation is completed, proceed to erase the sector */ - FLASH->CR &= CR_PSIZE_MASK; - FLASH->CR |= tmp_psize; - CLEAR_BIT(FLASH->CR, FLASH_CR_SNB); - FLASH->CR |= FLASH_CR_SER | (Sector << FLASH_CR_SNB_Pos); - FLASH->CR |= FLASH_CR_STRT; - - /* Data synchronous Barrier (DSB) Just after the write operation - This will force the CPU to respect the sequence of instruction (no optimization).*/ - __DSB(); -} - -/** - * @brief Return the FLASH Write Protection Option Bytes value. - * @retval uint32_t FLASH Write Protection Option Bytes value - */ -static uint32_t FLASH_OB_GetWRP(void) -{ - /* Return the FLASH write protection Register value */ - return ((uint32_t)(FLASH->OPTCR & 0x0FFF0000)); -} - -/** - * @brief Program the FLASH User Option Byte: IWDG_SW / RST_STOP / RST_STDBY. - * @param Wwdg Selects the IWDG mode - * This parameter can be one of the following values: - * @arg OB_WWDG_SW: Software WWDG selected - * @arg OB_WWDG_HW: Hardware WWDG selected - * @param Iwdg Selects the WWDG mode - * This parameter can be one of the following values: - * @arg OB_IWDG_SW: Software IWDG selected - * @arg OB_IWDG_HW: Hardware IWDG selected - * @param Stop Reset event when entering STOP mode. - * This parameter can be one of the following values: - * @arg OB_STOP_NO_RST: No reset generated when entering in STOP - * @arg OB_STOP_RST: Reset generated when entering in STOP - * @param Stdby Reset event when entering Standby mode. - * This parameter can be one of the following values: - * @arg OB_STDBY_NO_RST: No reset generated when entering in STANDBY - * @arg OB_STDBY_RST: Reset generated when entering in STANDBY - * @param Iwdgstop Independent watchdog counter freeze in Stop mode. - * This parameter can be one of the following values: - * @arg OB_IWDG_STOP_FREEZE: Freeze IWDG counter in STOP - * @arg OB_IWDG_STOP_ACTIVE: IWDG counter active in STOP - * @param Iwdgstdby Independent watchdog counter freeze in standby mode. - * This parameter can be one of the following values: - * @arg OB_IWDG_STDBY_FREEZE: Freeze IWDG counter in STANDBY - * @arg OB_IWDG_STDBY_ACTIVE: IWDG counter active in STANDBY - * @param NDBank Flash Single Bank mode enabled. - * This parameter can be one of the following values: - * @arg OB_NDBANK_SINGLE_BANK: enable 256 bits mode (Flash is a single bank) - * @arg OB_NDBANK_DUAL_BANK: disable 256 bits mode (Flash is a dual bank in 128 bits mode) - * @param NDBoot Flash Dual boot mode disable. - * This parameter can be one of the following values: - * @arg OB_DUAL_BOOT_DISABLE: Disable Dual Boot - * @arg OB_DUAL_BOOT_ENABLE: Enable Dual Boot - - * @retval HAL Status - */ -static HAL_StatusTypeDef FLASH_OB_UserConfig(uint32_t Wwdg, uint32_t Iwdg, uint32_t Stop, uint32_t Stdby, uint32_t Iwdgstop, \ - uint32_t Iwdgstdby, uint32_t NDBank, uint32_t NDBoot) -{ - uint32_t useroptionmask = 0x00; - uint32_t useroptionvalue = 0x00; - - HAL_StatusTypeDef status = HAL_OK; - - /* Check the parameters */ - assert_param(IS_OB_WWDG_SOURCE(Wwdg)); - assert_param(IS_OB_IWDG_SOURCE(Iwdg)); - assert_param(IS_OB_STOP_SOURCE(Stop)); - assert_param(IS_OB_STDBY_SOURCE(Stdby)); - assert_param(IS_OB_IWDG_STOP_FREEZE(Iwdgstop)); - assert_param(IS_OB_IWDG_STDBY_FREEZE(Iwdgstdby)); - assert_param(IS_OB_NDBANK(NDBank)); - assert_param(IS_OB_NDBOOT(NDBoot)); - - /* Wait for last operation to be completed */ - status = FLASH_WaitForLastOperation((uint32_t)FLASH_TIMEOUT_VALUE); - - if(status == HAL_OK) - { - useroptionmask = (FLASH_OPTCR_WWDG_SW | FLASH_OPTCR_IWDG_SW | FLASH_OPTCR_nRST_STOP | \ - FLASH_OPTCR_nRST_STDBY | FLASH_OPTCR_IWDG_STOP | FLASH_OPTCR_IWDG_STDBY | \ - FLASH_OPTCR_nDBOOT | FLASH_OPTCR_nDBANK); - - useroptionvalue = (Iwdg | Wwdg | Stop | Stdby | Iwdgstop | Iwdgstdby | NDBoot | NDBank); - - /* Update User Option Byte */ - MODIFY_REG(FLASH->OPTCR, useroptionmask, useroptionvalue); - } - - return status; -} - -/** - * @brief Return the FLASH User Option Byte value. - * @retval uint32_t FLASH User Option Bytes values: WWDG_SW(Bit4), IWDG_SW(Bit5), nRST_STOP(Bit6), - * nRST_STDBY(Bit7), nDBOOT(Bit28), nDBANK(Bit29), IWDG_STDBY(Bit30) and IWDG_STOP(Bit31). - */ -static uint32_t FLASH_OB_GetUser(void) -{ - /* Return the User Option Byte */ - return ((uint32_t)(FLASH->OPTCR & 0xF00000F0U)); -} -#else - -/** - * @brief Full erase of FLASH memory sectors - * @param VoltageRange The device voltage range which defines the erase parallelism. - * This parameter can be one of the following values: - * @arg VOLTAGE_RANGE_1: when the device voltage range is 1.8V to 2.1V, - * the operation will be done by byte (8-bit) - * @arg VOLTAGE_RANGE_2: when the device voltage range is 2.1V to 2.7V, - * the operation will be done by half word (16-bit) - * @arg VOLTAGE_RANGE_3: when the device voltage range is 2.7V to 3.6V, - * the operation will be done by word (32-bit) - * @arg VOLTAGE_RANGE_4: when the device voltage range is 2.7V to 3.6V + External Vpp, - * the operation will be done by double word (64-bit) - * - * @retval HAL Status - */ -static void FLASH_MassErase(uint8_t VoltageRange) -{ - /* Check the parameters */ - assert_param(IS_VOLTAGERANGE(VoltageRange)); - - /* if the previous operation is completed, proceed to erase all sectors */ - FLASH->CR &= CR_PSIZE_MASK; - FLASH->CR |= FLASH_CR_MER; - FLASH->CR |= FLASH_CR_STRT | ((uint32_t)VoltageRange <<8); - /* Data synchronous Barrier (DSB) Just after the write operation - This will force the CPU to respect the sequence of instruction (no optimization).*/ - __DSB(); -} - -/** - * @brief Erase the specified FLASH memory sector - * @param Sector FLASH sector to erase - * The value of this parameter depend on device used within the same series - * @param VoltageRange The device voltage range which defines the erase parallelism. - * This parameter can be one of the following values: - * @arg FLASH_VOLTAGE_RANGE_1: when the device voltage range is 1.8V to 2.1V, - * the operation will be done by byte (8-bit) - * @arg FLASH_VOLTAGE_RANGE_2: when the device voltage range is 2.1V to 2.7V, - * the operation will be done by half word (16-bit) - * @arg FLASH_VOLTAGE_RANGE_3: when the device voltage range is 2.7V to 3.6V, - * the operation will be done by word (32-bit) - * @arg FLASH_VOLTAGE_RANGE_4: when the device voltage range is 2.7V to 3.6V + External Vpp, - * the operation will be done by double word (64-bit) - * - * @retval None - */ -void FLASH_Erase_Sector(uint32_t Sector, uint8_t VoltageRange) -{ - uint32_t tmp_psize = 0; - - /* Check the parameters */ - assert_param(IS_FLASH_SECTOR(Sector)); - assert_param(IS_VOLTAGERANGE(VoltageRange)); - - if(VoltageRange == FLASH_VOLTAGE_RANGE_1) - { - tmp_psize = FLASH_PSIZE_BYTE; - } - else if(VoltageRange == FLASH_VOLTAGE_RANGE_2) - { - tmp_psize = FLASH_PSIZE_HALF_WORD; - } - else if(VoltageRange == FLASH_VOLTAGE_RANGE_3) - { - tmp_psize = FLASH_PSIZE_WORD; - } - else - { - tmp_psize = FLASH_PSIZE_DOUBLE_WORD; - } - - /* If the previous operation is completed, proceed to erase the sector */ - FLASH->CR &= CR_PSIZE_MASK; - FLASH->CR |= tmp_psize; - FLASH->CR &= SECTOR_MASK; - FLASH->CR |= FLASH_CR_SER | (Sector << FLASH_CR_SNB_Pos); - FLASH->CR |= FLASH_CR_STRT; - - /* Data synchronous Barrier (DSB) Just after the write operation - This will force the CPU to respect the sequence of instruction (no optimization).*/ - __DSB(); -} - -/** - * @brief Return the FLASH Write Protection Option Bytes value. - * @retval uint32_t FLASH Write Protection Option Bytes value - */ -static uint32_t FLASH_OB_GetWRP(void) -{ - /* Return the FLASH write protection Register value */ - return ((uint32_t)(FLASH->OPTCR & 0x00FF0000)); -} - -/** - * @brief Program the FLASH User Option Byte: IWDG_SW / RST_STOP / RST_STDBY. - * @param Wwdg Selects the IWDG mode - * This parameter can be one of the following values: - * @arg OB_WWDG_SW: Software WWDG selected - * @arg OB_WWDG_HW: Hardware WWDG selected - * @param Iwdg Selects the WWDG mode - * This parameter can be one of the following values: - * @arg OB_IWDG_SW: Software IWDG selected - * @arg OB_IWDG_HW: Hardware IWDG selected - * @param Stop Reset event when entering STOP mode. - * This parameter can be one of the following values: - * @arg OB_STOP_NO_RST: No reset generated when entering in STOP - * @arg OB_STOP_RST: Reset generated when entering in STOP - * @param Stdby Reset event when entering Standby mode. - * This parameter can be one of the following values: - * @arg OB_STDBY_NO_RST: No reset generated when entering in STANDBY - * @arg OB_STDBY_RST: Reset generated when entering in STANDBY - * @param Iwdgstop Independent watchdog counter freeze in Stop mode. - * This parameter can be one of the following values: - * @arg OB_IWDG_STOP_FREEZE: Freeze IWDG counter in STOP - * @arg OB_IWDG_STOP_ACTIVE: IWDG counter active in STOP - * @param Iwdgstdby Independent watchdog counter freeze in standby mode. - * This parameter can be one of the following values: - * @arg OB_IWDG_STDBY_FREEZE: Freeze IWDG counter in STANDBY - * @arg OB_IWDG_STDBY_ACTIVE: IWDG counter active in STANDBY - * @retval HAL Status - */ -static HAL_StatusTypeDef FLASH_OB_UserConfig(uint32_t Wwdg, uint32_t Iwdg, uint32_t Stop, uint32_t Stdby, uint32_t Iwdgstop, uint32_t Iwdgstdby) -{ - uint32_t useroptionmask = 0x00; - uint32_t useroptionvalue = 0x00; - - HAL_StatusTypeDef status = HAL_OK; - - /* Check the parameters */ - assert_param(IS_OB_WWDG_SOURCE(Wwdg)); - assert_param(IS_OB_IWDG_SOURCE(Iwdg)); - assert_param(IS_OB_STOP_SOURCE(Stop)); - assert_param(IS_OB_STDBY_SOURCE(Stdby)); - assert_param(IS_OB_IWDG_STOP_FREEZE(Iwdgstop)); - assert_param(IS_OB_IWDG_STDBY_FREEZE(Iwdgstdby)); - - /* Wait for last operation to be completed */ - status = FLASH_WaitForLastOperation((uint32_t)FLASH_TIMEOUT_VALUE); - - if(status == HAL_OK) - { - useroptionmask = (FLASH_OPTCR_WWDG_SW | FLASH_OPTCR_IWDG_SW | FLASH_OPTCR_nRST_STOP | \ - FLASH_OPTCR_nRST_STDBY | FLASH_OPTCR_IWDG_STOP | FLASH_OPTCR_IWDG_STDBY); - - useroptionvalue = (Iwdg | Wwdg | Stop | Stdby | Iwdgstop | Iwdgstdby); - - /* Update User Option Byte */ - MODIFY_REG(FLASH->OPTCR, useroptionmask, useroptionvalue); - } - - return status; - -} - -/** - * @brief Return the FLASH User Option Byte value. - * @retval uint32_t FLASH User Option Bytes values: WWDG_SW(Bit4), IWDG_SW(Bit5), nRST_STOP(Bit6), - * nRST_STDBY(Bit7), IWDG_STDBY(Bit30) and IWDG_STOP(Bit31). - */ -static uint32_t FLASH_OB_GetUser(void) -{ - /* Return the User Option Byte */ - return ((uint32_t)(FLASH->OPTCR & 0xC00000F0U)); -} -#endif /* FLASH_OPTCR_nDBANK */ - -/** - * @brief Enable the write protection of the desired bank1 or bank2 sectors - * - * @note When the memory read protection level is selected (RDP level = 1), - * it is not possible to program or erase the flash sector i if CortexM7 - * debug features are connected or boot code is executed in RAM, even if nWRPi = 1 - * - * @param WRPSector specifies the sector(s) to be write protected. - * This parameter can be one of the following values: - * @arg WRPSector: A value between OB_WRP_SECTOR_0 and OB_WRP_SECTOR_7 (for STM32F74xxx/STM32F75xxx devices) - * or a value between OB_WRP_SECTOR_0 and OB_WRP_SECTOR_11 (in Single Bank mode for STM32F76xxx/STM32F77xxx devices) - * or a value between OB_WRP_DB_SECTOR_0 and OB_WRP_DB_SECTOR_23 (in Dual Bank mode for STM32F76xxx/STM32F77xxx devices) - * @arg OB_WRP_SECTOR_All - * - * @retval HAL FLASH State - */ -static HAL_StatusTypeDef FLASH_OB_EnableWRP(uint32_t WRPSector) -{ - HAL_StatusTypeDef status = HAL_OK; - - /* Check the parameters */ - assert_param(IS_OB_WRP_SECTOR(WRPSector)); - - /* Wait for last operation to be completed */ - status = FLASH_WaitForLastOperation((uint32_t)FLASH_TIMEOUT_VALUE); - - if(status == HAL_OK) - { - /*Write protection enabled on sectors */ - FLASH->OPTCR &= (~WRPSector); - } - - return status; -} - -/** - * @brief Disable the write protection of the desired bank1 or bank 2 sectors - * - * @note When the memory read protection level is selected (RDP level = 1), - * it is not possible to program or erase the flash sector i if CortexM4 - * debug features are connected or boot code is executed in RAM, even if nWRPi = 1 - * - * @param WRPSector specifies the sector(s) to be write protected. - * This parameter can be one of the following values: - * @arg WRPSector: A value between OB_WRP_SECTOR_0 and OB_WRP_SECTOR_7 (for STM32F74xxx/STM32F75xxx devices) - * or a value between OB_WRP_SECTOR_0 and OB_WRP_SECTOR_11 (in Single Bank mode for STM32F76xxx/STM32F77xxx devices) - * or a value between OB_WRP_DB_SECTOR_0 and OB_WRP_DB_SECTOR_23 (in Dual Bank mode for STM32F76xxx/STM32F77xxx devices) - * @arg OB_WRP_Sector_All - * - * - * @retval HAL Status - */ -static HAL_StatusTypeDef FLASH_OB_DisableWRP(uint32_t WRPSector) -{ - HAL_StatusTypeDef status = HAL_OK; - - /* Check the parameters */ - assert_param(IS_OB_WRP_SECTOR(WRPSector)); - - /* Wait for last operation to be completed */ - status = FLASH_WaitForLastOperation((uint32_t)FLASH_TIMEOUT_VALUE); - - if(status == HAL_OK) - { - /* Write protection disabled on sectors */ - FLASH->OPTCR |= (WRPSector); - } - - return status; -} - -/** - * @brief Set the read protection level. - * @param Level specifies the read protection level. - * This parameter can be one of the following values: - * @arg OB_RDP_LEVEL_0: No protection - * @arg OB_RDP_LEVEL_1: Read protection of the memory - * @arg OB_RDP_LEVEL_2: Full chip protection - * - * @note WARNING: When enabling OB_RDP level 2 it's no more possible to go back to level 1 or 0 - * - * @retval HAL Status - */ -static HAL_StatusTypeDef FLASH_OB_RDP_LevelConfig(uint8_t Level) -{ - HAL_StatusTypeDef status = HAL_OK; - - /* Check the parameters */ - assert_param(IS_OB_RDP_LEVEL(Level)); - - /* Wait for last operation to be completed */ - status = FLASH_WaitForLastOperation((uint32_t)FLASH_TIMEOUT_VALUE); - - if(status == HAL_OK) - { - *(__IO uint8_t*)OPTCR_BYTE1_ADDRESS = Level; - } - - return status; -} - -/** - * @brief Set the BOR Level. - * @param Level specifies the Option Bytes BOR Reset Level. - * This parameter can be one of the following values: - * @arg OB_BOR_LEVEL3: Supply voltage ranges from 2.7 to 3.6 V - * @arg OB_BOR_LEVEL2: Supply voltage ranges from 2.4 to 2.7 V - * @arg OB_BOR_LEVEL1: Supply voltage ranges from 2.1 to 2.4 V - * @arg OB_BOR_OFF: Supply voltage ranges from 1.62 to 2.1 V - * @retval HAL Status - */ -static HAL_StatusTypeDef FLASH_OB_BOR_LevelConfig(uint8_t Level) -{ - /* Check the parameters */ - assert_param(IS_OB_BOR_LEVEL(Level)); - - /* Set the BOR Level */ - MODIFY_REG(FLASH->OPTCR, FLASH_OPTCR_BOR_LEV, Level); - - return HAL_OK; - -} - -/** - * @brief Configure Boot base address. - * - * @param BootOption specifies Boot base address depending from Boot pin = 0 or pin = 1 - * This parameter can be one of the following values: - * @arg OPTIONBYTE_BOOTADDR_0 : Boot address based when Boot pin = 0 - * @arg OPTIONBYTE_BOOTADDR_1 : Boot address based when Boot pin = 1 - * @param Address specifies Boot base address - * This parameter can be one of the following values: - * @arg OB_BOOTADDR_ITCM_RAM : Boot from ITCM RAM (0x00000000) - * @arg OB_BOOTADDR_SYSTEM : Boot from System memory bootloader (0x00100000) - * @arg OB_BOOTADDR_ITCM_FLASH : Boot from Flash on ITCM interface (0x00200000) - * @arg OB_BOOTADDR_AXIM_FLASH : Boot from Flash on AXIM interface (0x08000000) - * @arg OB_BOOTADDR_DTCM_RAM : Boot from DTCM RAM (0x20000000) - * @arg OB_BOOTADDR_SRAM1 : Boot from SRAM1 (0x20010000) - * @arg OB_BOOTADDR_SRAM2 : Boot from SRAM2 (0x2004C000) - * - * @retval HAL Status - */ -static HAL_StatusTypeDef FLASH_OB_BootAddressConfig(uint32_t BootOption, uint32_t Address) -{ - HAL_StatusTypeDef status = HAL_OK; - - /* Check the parameters */ - assert_param(IS_OB_BOOT_ADDRESS(Address)); - - /* Wait for last operation to be completed */ - status = FLASH_WaitForLastOperation((uint32_t)FLASH_TIMEOUT_VALUE); - - if(status == HAL_OK) - { - if(BootOption == OPTIONBYTE_BOOTADDR_0) - { - MODIFY_REG(FLASH->OPTCR1, FLASH_OPTCR1_BOOT_ADD0, Address); - } - else - { - MODIFY_REG(FLASH->OPTCR1, FLASH_OPTCR1_BOOT_ADD1, (Address << 16)); - } - } - - return status; -} - -/** - * @brief Returns the FLASH Read Protection level. - * @retval FlagStatus FLASH ReadOut Protection Status: - * This parameter can be one of the following values: - * @arg OB_RDP_LEVEL_0: No protection - * @arg OB_RDP_LEVEL_1: Read protection of the memory - * @arg OB_RDP_LEVEL_2: Full chip protection - */ -static uint8_t FLASH_OB_GetRDP(void) -{ - uint8_t readstatus = OB_RDP_LEVEL_0; - - if ((*(__IO uint8_t*)(OPTCR_BYTE1_ADDRESS)) == OB_RDP_LEVEL_0) - { - readstatus = OB_RDP_LEVEL_0; - } - else if ((*(__IO uint8_t*)(OPTCR_BYTE1_ADDRESS)) == OB_RDP_LEVEL_2) - { - readstatus = OB_RDP_LEVEL_2; - } - else - { - readstatus = OB_RDP_LEVEL_1; - } - - return readstatus; -} - -/** - * @brief Returns the FLASH BOR level. - * @retval uint32_t The FLASH BOR level: - * - OB_BOR_LEVEL3: Supply voltage ranges from 2.7 to 3.6 V - * - OB_BOR_LEVEL2: Supply voltage ranges from 2.4 to 2.7 V - * - OB_BOR_LEVEL1: Supply voltage ranges from 2.1 to 2.4 V - * - OB_BOR_OFF : Supply voltage ranges from 1.62 to 2.1 V - */ -static uint32_t FLASH_OB_GetBOR(void) -{ - /* Return the FLASH BOR level */ - return ((uint32_t)(FLASH->OPTCR & 0x0C)); -} - -/** - * @brief Configure Boot base address. - * - * @param BootOption specifies Boot base address depending from Boot pin = 0 or pin = 1 - * This parameter can be one of the following values: - * @arg OPTIONBYTE_BOOTADDR_0 : Boot address based when Boot pin = 0 - * @arg OPTIONBYTE_BOOTADDR_1 : Boot address based when Boot pin = 1 - * - * @retval uint32_t Boot Base Address: - * - OB_BOOTADDR_ITCM_RAM : Boot from ITCM RAM (0x00000000) - * - OB_BOOTADDR_SYSTEM : Boot from System memory bootloader (0x00100000) - * - OB_BOOTADDR_ITCM_FLASH : Boot from Flash on ITCM interface (0x00200000) - * - OB_BOOTADDR_AXIM_FLASH : Boot from Flash on AXIM interface (0x08000000) - * - OB_BOOTADDR_DTCM_RAM : Boot from DTCM RAM (0x20000000) - * - OB_BOOTADDR_SRAM1 : Boot from SRAM1 (0x20010000) - * - OB_BOOTADDR_SRAM2 : Boot from SRAM2 (0x2004C000) - */ -static uint32_t FLASH_OB_GetBootAddress(uint32_t BootOption) -{ - uint32_t Address = 0; - - /* Return the Boot base Address */ - if(BootOption == OPTIONBYTE_BOOTADDR_0) - { - Address = FLASH->OPTCR1 & FLASH_OPTCR1_BOOT_ADD0; - } - else - { - Address = ((FLASH->OPTCR1 & FLASH_OPTCR1_BOOT_ADD1) >> 16); - } - - return Address; -} - -#if defined (FLASH_OPTCR2_PCROP) -/** - * @brief Set the PCROP protection for sectors. - * @param PCROPSector specifies the sector(s) to be PCROP protected. - * This parameter can be one of the following values: - * @arg OB_PCROP_SECTOR_x: A value between OB_PCROP_SECTOR_0 and OB_PCROP_SECTOR_7 - * @arg OB_PCROP_SECTOR_ALL - * - * @retval HAL Status - */ -static HAL_StatusTypeDef FLASH_OB_PCROP_Config(uint32_t PCROPSector) -{ - HAL_StatusTypeDef status = HAL_OK; - - /* Check the parameters */ - assert_param(IS_OB_PCROP_SECTOR(PCROPSector)); - - /* Wait for last operation to be completed */ - status = FLASH_WaitForLastOperation((uint32_t)FLASH_TIMEOUT_VALUE); - - if(status == HAL_OK) - { - MODIFY_REG(FLASH->OPTCR2, FLASH_OPTCR2_PCROP, PCROPSector); - } - - return status; -} - -/** - * @brief Set the PCROP_RDP value - * @param Pcrop_Rdp specifies the PCROP_RDP bit value. - * - * @retval HAL Status - */ -static HAL_StatusTypeDef FLASH_OB_PCROP_RDP_Config(uint32_t Pcrop_Rdp) -{ - HAL_StatusTypeDef status = HAL_OK; - - /* Check the parameters */ - assert_param(IS_OB_PCROP_RDP_VALUE(Pcrop_Rdp)); - - /* Wait for last operation to be completed */ - status = FLASH_WaitForLastOperation((uint32_t)FLASH_TIMEOUT_VALUE); - - if(status == HAL_OK) - { - MODIFY_REG(FLASH->OPTCR2, FLASH_OPTCR2_PCROP_RDP, Pcrop_Rdp); - } - - return status; -} - -/** - * @brief Return the FLASH PCROP Protection Option Bytes value. - * @retval uint32_t FLASH PCROP Protection Option Bytes value - */ -static uint32_t FLASH_OB_GetPCROP(void) -{ - /* Return the FLASH write protection Register value */ - return ((uint32_t)(FLASH->OPTCR2 & FLASH_OPTCR2_PCROP)); -} - -/** - * @brief Return the FLASH PCROP_RDP option byte value. - * @retval uint32_t FLASH PCROP_RDP option byte value - */ -static uint32_t FLASH_OB_GetPCROPRDP(void) -{ - /* Return the FLASH write protection Register value */ - return ((uint32_t)(FLASH->OPTCR2 & FLASH_OPTCR2_PCROP_RDP)); -} -#endif /* FLASH_OPTCR2_PCROP */ - -/** - * @} - */ - -#endif /* HAL_FLASH_MODULE_ENABLED */ - -/** - * @} - */ - -/** - * @} - */ - -/************************ (C) COPYRIGHT STMicroelectronics *****END OF FILE****/ diff --git a/test_dma/Drivers/STM32F7xx_HAL_Driver/Src/stm32f7xx_hal_gpio.c b/test_dma/Drivers/STM32F7xx_HAL_Driver/Src/stm32f7xx_hal_gpio.c deleted file mode 100644 index ffc617d..0000000 --- a/test_dma/Drivers/STM32F7xx_HAL_Driver/Src/stm32f7xx_hal_gpio.c +++ /dev/null @@ -1,531 +0,0 @@ -/** - ****************************************************************************** - * @file stm32f7xx_hal_gpio.c - * @author MCD Application Team - * @brief GPIO HAL module driver. - * This file provides firmware functions to manage the following - * functionalities of the General Purpose Input/Output (GPIO) peripheral: - * + Initialization and de-initialization functions - * + IO operation functions - * - @verbatim - ============================================================================== - ##### GPIO Peripheral features ##### - ============================================================================== - [..] - Subject to the specific hardware characteristics of each I/O port listed in the datasheet, each - port bit of the General Purpose IO (GPIO) Ports, can be individually configured by software - in several modes: - (+) Input mode - (+) Analog mode - (+) Output mode - (+) Alternate function mode - (+) External interrupt/event lines - - [..] - During and just after reset, the alternate functions and external interrupt - lines are not active and the I/O ports are configured in input floating mode. - - [..] - All GPIO pins have weak internal pull-up and pull-down resistors, which can be - activated or not. - - [..] - In Output or Alternate mode, each IO can be configured on open-drain or push-pull - type and the IO speed can be selected depending on the VDD value. - - [..] - All ports have external interrupt/event capability. To use external interrupt - lines, the port must be configured in input mode. All available GPIO pins are - connected to the 16 external interrupt/event lines from EXTI0 to EXTI15. - - [..] - The external interrupt/event controller consists of up to 23 edge detectors - (16 lines are connected to GPIO) for generating event/interrupt requests (each - input line can be independently configured to select the type (interrupt or event) - and the corresponding trigger event (rising or falling or both). Each line can - also be masked independently. - - ##### How to use this driver ##### - ============================================================================== - [..] - (#) Enable the GPIO AHB clock using the following function: __HAL_RCC_GPIOx_CLK_ENABLE(). - - (#) Configure the GPIO pin(s) using HAL_GPIO_Init(). - (++) Configure the IO mode using "Mode" member from GPIO_InitTypeDef structure - (++) Activate Pull-up, Pull-down resistor using "Pull" member from GPIO_InitTypeDef - structure. - (++) In case of Output or alternate function mode selection: the speed is - configured through "Speed" member from GPIO_InitTypeDef structure. - (++) In alternate mode is selection, the alternate function connected to the IO - is configured through "Alternate" member from GPIO_InitTypeDef structure. - (++) Analog mode is required when a pin is to be used as ADC channel - or DAC output. - (++) In case of external interrupt/event selection the "Mode" member from - GPIO_InitTypeDef structure select the type (interrupt or event) and - the corresponding trigger event (rising or falling or both). - - (#) In case of external interrupt/event mode selection, configure NVIC IRQ priority - mapped to the EXTI line using HAL_NVIC_SetPriority() and enable it using - HAL_NVIC_EnableIRQ(). - - (#) To get the level of a pin configured in input mode use HAL_GPIO_ReadPin(). - - (#) To set/reset the level of a pin configured in output mode use - HAL_GPIO_WritePin()/HAL_GPIO_TogglePin(). - - (#) To lock pin configuration until next reset use HAL_GPIO_LockPin(). - - - (#) During and just after reset, the alternate functions are not - active and the GPIO pins are configured in input floating mode (except JTAG - pins). - - (#) The LSE oscillator pins OSC32_IN and OSC32_OUT can be used as general purpose - (PC14 and PC15, respectively) when the LSE oscillator is off. The LSE has - priority over the GPIO function. - - (#) The HSE oscillator pins OSC_IN/OSC_OUT can be used as - general purpose PH0 and PH1, respectively, when the HSE oscillator is off. - The HSE has priority over the GPIO function. - - @endverbatim - ****************************************************************************** - * @attention - * - *

© Copyright (c) 2017 STMicroelectronics. - * All rights reserved.

- * - * This software component is licensed by ST under BSD 3-Clause license, - * the "License"; You may not use this file except in compliance with the - * License. You may obtain a copy of the License at: - * opensource.org/licenses/BSD-3-Clause - * - ****************************************************************************** - */ - -/* Includes ------------------------------------------------------------------*/ -#include "stm32f7xx_hal.h" - -/** @addtogroup STM32F7xx_HAL_Driver - * @{ - */ - -/** @defgroup GPIO GPIO - * @brief GPIO HAL module driver - * @{ - */ - -#ifdef HAL_GPIO_MODULE_ENABLED - -/* Private typedef -----------------------------------------------------------*/ -/* Private define ------------------------------------------------------------*/ -/** @addtogroup GPIO_Private_Constants GPIO Private Constants - * @{ - */ -#define GPIO_MODE ((uint32_t)0x00000003U) -#define EXTI_MODE ((uint32_t)0x10000000U) -#define GPIO_MODE_IT ((uint32_t)0x00010000U) -#define GPIO_MODE_EVT ((uint32_t)0x00020000U) -#define RISING_EDGE ((uint32_t)0x00100000U) -#define FALLING_EDGE ((uint32_t)0x00200000U) -#define GPIO_OUTPUT_TYPE ((uint32_t)0x00000010U) - -#define GPIO_NUMBER ((uint32_t)16U) -/** - * @} - */ -/* Private macro -------------------------------------------------------------*/ -/* Private variables ---------------------------------------------------------*/ -/* Private function prototypes -----------------------------------------------*/ -/* Private functions ---------------------------------------------------------*/ -/* Exported functions --------------------------------------------------------*/ -/** @defgroup GPIO_Exported_Functions GPIO Exported Functions - * @{ - */ - -/** @defgroup GPIO_Exported_Functions_Group1 Initialization and de-initialization functions - * @brief Initialization and Configuration functions - * -@verbatim - =============================================================================== - ##### Initialization and de-initialization functions ##### - =============================================================================== - [..] - This section provides functions allowing to initialize and de-initialize the GPIOs - to be ready for use. - -@endverbatim - * @{ - */ - -/** - * @brief Initializes the GPIOx peripheral according to the specified parameters in the GPIO_Init. - * @param GPIOx where x can be (A..K) to select the GPIO peripheral. - * @param GPIO_Init pointer to a GPIO_InitTypeDef structure that contains - * the configuration information for the specified GPIO peripheral. - * @retval None - */ -void HAL_GPIO_Init(GPIO_TypeDef *GPIOx, GPIO_InitTypeDef *GPIO_Init) -{ - uint32_t position = 0x00; - uint32_t ioposition = 0x00; - uint32_t iocurrent = 0x00; - uint32_t temp = 0x00; - - /* Check the parameters */ - assert_param(IS_GPIO_ALL_INSTANCE(GPIOx)); - assert_param(IS_GPIO_PIN(GPIO_Init->Pin)); - assert_param(IS_GPIO_MODE(GPIO_Init->Mode)); - assert_param(IS_GPIO_PULL(GPIO_Init->Pull)); - - /* Configure the port pins */ - for(position = 0; position < GPIO_NUMBER; position++) - { - /* Get the IO position */ - ioposition = ((uint32_t)0x01) << position; - /* Get the current IO position */ - iocurrent = (uint32_t)(GPIO_Init->Pin) & ioposition; - - if(iocurrent == ioposition) - { - /*--------------------- GPIO Mode Configuration ------------------------*/ - /* In case of Alternate function mode selection */ - if((GPIO_Init->Mode == GPIO_MODE_AF_PP) || (GPIO_Init->Mode == GPIO_MODE_AF_OD)) - { - /* Check the Alternate function parameter */ - assert_param(IS_GPIO_AF(GPIO_Init->Alternate)); - - /* Configure Alternate function mapped with the current IO */ - temp = GPIOx->AFR[position >> 3]; - temp &= ~((uint32_t)0xF << ((uint32_t)(position & (uint32_t)0x07) * 4)) ; - temp |= ((uint32_t)(GPIO_Init->Alternate) << (((uint32_t)position & (uint32_t)0x07) * 4)); - GPIOx->AFR[position >> 3] = temp; - } - - /* Configure IO Direction mode (Input, Output, Alternate or Analog) */ - temp = GPIOx->MODER; - temp &= ~(GPIO_MODER_MODER0 << (position * 2)); - temp |= ((GPIO_Init->Mode & GPIO_MODE) << (position * 2)); - GPIOx->MODER = temp; - - /* In case of Output or Alternate function mode selection */ - if((GPIO_Init->Mode == GPIO_MODE_OUTPUT_PP) || (GPIO_Init->Mode == GPIO_MODE_AF_PP) || - (GPIO_Init->Mode == GPIO_MODE_OUTPUT_OD) || (GPIO_Init->Mode == GPIO_MODE_AF_OD)) - { - /* Check the Speed parameter */ - assert_param(IS_GPIO_SPEED(GPIO_Init->Speed)); - /* Configure the IO Speed */ - temp = GPIOx->OSPEEDR; - temp &= ~(GPIO_OSPEEDER_OSPEEDR0 << (position * 2)); - temp |= (GPIO_Init->Speed << (position * 2)); - GPIOx->OSPEEDR = temp; - - /* Configure the IO Output Type */ - temp = GPIOx->OTYPER; - temp &= ~(GPIO_OTYPER_OT_0 << position) ; - temp |= (((GPIO_Init->Mode & GPIO_OUTPUT_TYPE) >> 4) << position); - GPIOx->OTYPER = temp; - } - - /* Activate the Pull-up or Pull down resistor for the current IO */ - temp = GPIOx->PUPDR; - temp &= ~(GPIO_PUPDR_PUPDR0 << (position * 2)); - temp |= ((GPIO_Init->Pull) << (position * 2)); - GPIOx->PUPDR = temp; - - /*--------------------- EXTI Mode Configuration ------------------------*/ - /* Configure the External Interrupt or event for the current IO */ - if((GPIO_Init->Mode & EXTI_MODE) == EXTI_MODE) - { - /* Enable SYSCFG Clock */ - __HAL_RCC_SYSCFG_CLK_ENABLE(); - - temp = SYSCFG->EXTICR[position >> 2]; - temp &= ~(((uint32_t)0x0F) << (4 * (position & 0x03))); - temp |= ((uint32_t)(GPIO_GET_INDEX(GPIOx)) << (4 * (position & 0x03))); - SYSCFG->EXTICR[position >> 2] = temp; - - /* Clear EXTI line configuration */ - temp = EXTI->IMR; - temp &= ~((uint32_t)iocurrent); - if((GPIO_Init->Mode & GPIO_MODE_IT) == GPIO_MODE_IT) - { - temp |= iocurrent; - } - EXTI->IMR = temp; - - temp = EXTI->EMR; - temp &= ~((uint32_t)iocurrent); - if((GPIO_Init->Mode & GPIO_MODE_EVT) == GPIO_MODE_EVT) - { - temp |= iocurrent; - } - EXTI->EMR = temp; - - /* Clear Rising Falling edge configuration */ - temp = EXTI->RTSR; - temp &= ~((uint32_t)iocurrent); - if((GPIO_Init->Mode & RISING_EDGE) == RISING_EDGE) - { - temp |= iocurrent; - } - EXTI->RTSR = temp; - - temp = EXTI->FTSR; - temp &= ~((uint32_t)iocurrent); - if((GPIO_Init->Mode & FALLING_EDGE) == FALLING_EDGE) - { - temp |= iocurrent; - } - EXTI->FTSR = temp; - } - } - } -} - -/** - * @brief De-initializes the GPIOx peripheral registers to their default reset values. - * @param GPIOx where x can be (A..K) to select the GPIO peripheral. - * @param GPIO_Pin specifies the port bit to be written. - * This parameter can be one of GPIO_PIN_x where x can be (0..15). - * @retval None - */ -void HAL_GPIO_DeInit(GPIO_TypeDef *GPIOx, uint32_t GPIO_Pin) -{ - uint32_t position; - uint32_t ioposition = 0x00; - uint32_t iocurrent = 0x00; - uint32_t tmp = 0x00; - - /* Check the parameters */ - assert_param(IS_GPIO_ALL_INSTANCE(GPIOx)); - - /* Configure the port pins */ - for(position = 0; position < GPIO_NUMBER; position++) - { - /* Get the IO position */ - ioposition = ((uint32_t)0x01) << position; - /* Get the current IO position */ - iocurrent = (GPIO_Pin) & ioposition; - - if(iocurrent == ioposition) - { - /*------------------------- EXTI Mode Configuration --------------------*/ - tmp = SYSCFG->EXTICR[position >> 2]; - tmp &= (((uint32_t)0x0F) << (4 * (position & 0x03))); - if(tmp == ((uint32_t)(GPIO_GET_INDEX(GPIOx)) << (4 * (position & 0x03)))) - { - /* Configure the External Interrupt or event for the current IO */ - tmp = ((uint32_t)0x0F) << (4 * (position & 0x03)); - SYSCFG->EXTICR[position >> 2] &= ~tmp; - - /* Clear EXTI line configuration */ - EXTI->IMR &= ~((uint32_t)iocurrent); - EXTI->EMR &= ~((uint32_t)iocurrent); - - /* Clear Rising Falling edge configuration */ - EXTI->RTSR &= ~((uint32_t)iocurrent); - EXTI->FTSR &= ~((uint32_t)iocurrent); - } - /*------------------------- GPIO Mode Configuration --------------------*/ - /* Configure IO Direction in Input Floating Mode */ - GPIOx->MODER &= ~(GPIO_MODER_MODER0 << (position * 2)); - - /* Configure the default Alternate Function in current IO */ - GPIOx->AFR[position >> 3] &= ~((uint32_t)0xF << ((uint32_t)(position & (uint32_t)0x07) * 4)) ; - - /* Configure the default value for IO Speed */ - GPIOx->OSPEEDR &= ~(GPIO_OSPEEDER_OSPEEDR0 << (position * 2)); - - /* Configure the default value IO Output Type */ - GPIOx->OTYPER &= ~(GPIO_OTYPER_OT_0 << position) ; - - /* Deactivate the Pull-up and Pull-down resistor for the current IO */ - GPIOx->PUPDR &= ~(GPIO_PUPDR_PUPDR0 << (position * 2)); - } - } -} - -/** - * @} - */ - -/** @defgroup GPIO_Exported_Functions_Group2 IO operation functions - * @brief GPIO Read and Write - * -@verbatim - =============================================================================== - ##### IO operation functions ##### - =============================================================================== - -@endverbatim - * @{ - */ - -/** - * @brief Reads the specified input port pin. - * @param GPIOx where x can be (A..K) to select the GPIO peripheral. - * @param GPIO_Pin specifies the port bit to read. - * This parameter can be GPIO_PIN_x where x can be (0..15). - * @retval The input port pin value. - */ -GPIO_PinState HAL_GPIO_ReadPin(GPIO_TypeDef* GPIOx, uint16_t GPIO_Pin) -{ - GPIO_PinState bitstatus; - - /* Check the parameters */ - assert_param(IS_GPIO_PIN(GPIO_Pin)); - - if((GPIOx->IDR & GPIO_Pin) != (uint32_t)GPIO_PIN_RESET) - { - bitstatus = GPIO_PIN_SET; - } - else - { - bitstatus = GPIO_PIN_RESET; - } - return bitstatus; -} - -/** - * @brief Sets or clears the selected data port bit. - * - * @note This function uses GPIOx_BSRR register to allow atomic read/modify - * accesses. In this way, there is no risk of an IRQ occurring between - * the read and the modify access. - * - * @param GPIOx where x can be (A..K) to select the GPIO peripheral. - * @param GPIO_Pin specifies the port bit to be written. - * This parameter can be one of GPIO_PIN_x where x can be (0..15). - * @param PinState specifies the value to be written to the selected bit. - * This parameter can be one of the GPIO_PinState enum values: - * @arg GPIO_PIN_RESET: to clear the port pin - * @arg GPIO_PIN_SET: to set the port pin - * @retval None - */ -void HAL_GPIO_WritePin(GPIO_TypeDef* GPIOx, uint16_t GPIO_Pin, GPIO_PinState PinState) -{ - /* Check the parameters */ - assert_param(IS_GPIO_PIN(GPIO_Pin)); - assert_param(IS_GPIO_PIN_ACTION(PinState)); - - if(PinState != GPIO_PIN_RESET) - { - GPIOx->BSRR = GPIO_Pin; - } - else - { - GPIOx->BSRR = (uint32_t)GPIO_Pin << 16; - } -} - -/** - * @brief Toggles the specified GPIO pins. - * @param GPIOx Where x can be (A..I) to select the GPIO peripheral. - * @param GPIO_Pin Specifies the pins to be toggled. - * @retval None - */ -void HAL_GPIO_TogglePin(GPIO_TypeDef* GPIOx, uint16_t GPIO_Pin) -{ - /* Check the parameters */ - assert_param(IS_GPIO_PIN(GPIO_Pin)); - - if ((GPIOx->ODR & GPIO_Pin) == GPIO_Pin) - { - GPIOx->BSRR = (uint32_t)GPIO_Pin << GPIO_NUMBER; - } - else - { - GPIOx->BSRR = GPIO_Pin; - } -} - -/** - * @brief Locks GPIO Pins configuration registers. - * @note The locked registers are GPIOx_MODER, GPIOx_OTYPER, GPIOx_OSPEEDR, - * GPIOx_PUPDR, GPIOx_AFRL and GPIOx_AFRH. - * @note The configuration of the locked GPIO pins can no longer be modified - * until the next reset. - * @param GPIOx where x can be (A..F) to select the GPIO peripheral for STM32F7 family - * @param GPIO_Pin specifies the port bit to be locked. - * This parameter can be any combination of GPIO_PIN_x where x can be (0..15). - * @retval None - */ -HAL_StatusTypeDef HAL_GPIO_LockPin(GPIO_TypeDef* GPIOx, uint16_t GPIO_Pin) -{ - __IO uint32_t tmp = GPIO_LCKR_LCKK; - - /* Check the parameters */ - assert_param(IS_GPIO_PIN(GPIO_Pin)); - - /* Apply lock key write sequence */ - tmp |= GPIO_Pin; - /* Set LCKx bit(s): LCKK='1' + LCK[15-0] */ - GPIOx->LCKR = tmp; - /* Reset LCKx bit(s): LCKK='0' + LCK[15-0] */ - GPIOx->LCKR = GPIO_Pin; - /* Set LCKx bit(s): LCKK='1' + LCK[15-0] */ - GPIOx->LCKR = tmp; - /* Read LCKK bit*/ - tmp = GPIOx->LCKR; - - if((GPIOx->LCKR & GPIO_LCKR_LCKK) != RESET) - { - return HAL_OK; - } - else - { - return HAL_ERROR; - } -} - -/** - * @brief This function handles EXTI interrupt request. - * @param GPIO_Pin Specifies the pins connected EXTI line - * @retval None - */ -void HAL_GPIO_EXTI_IRQHandler(uint16_t GPIO_Pin) -{ - /* EXTI line interrupt detected */ - if(__HAL_GPIO_EXTI_GET_IT(GPIO_Pin) != RESET) - { - __HAL_GPIO_EXTI_CLEAR_IT(GPIO_Pin); - HAL_GPIO_EXTI_Callback(GPIO_Pin); - } -} - -/** - * @brief EXTI line detection callbacks. - * @param GPIO_Pin Specifies the pins connected EXTI line - * @retval None - */ -__weak void HAL_GPIO_EXTI_Callback(uint16_t GPIO_Pin) -{ - /* Prevent unused argument(s) compilation warning */ - UNUSED(GPIO_Pin); - - /* NOTE: This function Should not be modified, when the callback is needed, - the HAL_GPIO_EXTI_Callback could be implemented in the user file - */ -} - -/** - * @} - */ - - -/** - * @} - */ - -#endif /* HAL_GPIO_MODULE_ENABLED */ -/** - * @} - */ - -/** - * @} - */ - -/************************ (C) COPYRIGHT STMicroelectronics *****END OF FILE****/ diff --git a/test_dma/Drivers/STM32F7xx_HAL_Driver/Src/stm32f7xx_hal_i2c.c b/test_dma/Drivers/STM32F7xx_HAL_Driver/Src/stm32f7xx_hal_i2c.c deleted file mode 100644 index 775bff2..0000000 --- a/test_dma/Drivers/STM32F7xx_HAL_Driver/Src/stm32f7xx_hal_i2c.c +++ /dev/null @@ -1,6523 +0,0 @@ -/** - ****************************************************************************** - * @file stm32f7xx_hal_i2c.c - * @author MCD Application Team - * @brief I2C HAL module driver. - * This file provides firmware functions to manage the following - * functionalities of the Inter Integrated Circuit (I2C) peripheral: - * + Initialization and de-initialization functions - * + IO operation functions - * + Peripheral State and Errors functions - * - @verbatim - ============================================================================== - ##### How to use this driver ##### - ============================================================================== - [..] - The I2C HAL driver can be used as follows: - - (#) Declare a I2C_HandleTypeDef handle structure, for example: - I2C_HandleTypeDef hi2c; - - (#)Initialize the I2C low level resources by implementing the @ref HAL_I2C_MspInit() API: - (##) Enable the I2Cx interface clock - (##) I2C pins configuration - (+++) Enable the clock for the I2C GPIOs - (+++) Configure I2C pins as alternate function open-drain - (##) NVIC configuration if you need to use interrupt process - (+++) Configure the I2Cx interrupt priority - (+++) Enable the NVIC I2C IRQ Channel - (##) DMA Configuration if you need to use DMA process - (+++) Declare a DMA_HandleTypeDef handle structure for the transmit or receive stream - (+++) Enable the DMAx interface clock using - (+++) Configure the DMA handle parameters - (+++) Configure the DMA Tx or Rx stream - (+++) Associate the initialized DMA handle to the hi2c DMA Tx or Rx handle - (+++) Configure the priority and enable the NVIC for the transfer complete interrupt on - the DMA Tx or Rx stream - - (#) Configure the Communication Clock Timing, Own Address1, Master Addressing mode, Dual Addressing mode, - Own Address2, Own Address2 Mask, General call and Nostretch mode in the hi2c Init structure. - - (#) Initialize the I2C registers by calling the @ref HAL_I2C_Init(), configures also the low level Hardware - (GPIO, CLOCK, NVIC...etc) by calling the customized @ref HAL_I2C_MspInit(&hi2c) API. - - (#) To check if target device is ready for communication, use the function @ref HAL_I2C_IsDeviceReady() - - (#) For I2C IO and IO MEM operations, three operation modes are available within this driver : - - *** Polling mode IO operation *** - ================================= - [..] - (+) Transmit in master mode an amount of data in blocking mode using @ref HAL_I2C_Master_Transmit() - (+) Receive in master mode an amount of data in blocking mode using @ref HAL_I2C_Master_Receive() - (+) Transmit in slave mode an amount of data in blocking mode using @ref HAL_I2C_Slave_Transmit() - (+) Receive in slave mode an amount of data in blocking mode using @ref HAL_I2C_Slave_Receive() - - *** Polling mode IO MEM operation *** - ===================================== - [..] - (+) Write an amount of data in blocking mode to a specific memory address using @ref HAL_I2C_Mem_Write() - (+) Read an amount of data in blocking mode from a specific memory address using @ref HAL_I2C_Mem_Read() - - - *** Interrupt mode IO operation *** - =================================== - [..] - (+) Transmit in master mode an amount of data in non-blocking mode using @ref HAL_I2C_Master_Transmit_IT() - (+) At transmission end of transfer, @ref HAL_I2C_MasterTxCpltCallback() is executed and user can - add his own code by customization of function pointer @ref HAL_I2C_MasterTxCpltCallback() - (+) Receive in master mode an amount of data in non-blocking mode using @ref HAL_I2C_Master_Receive_IT() - (+) At reception end of transfer, @ref HAL_I2C_MasterRxCpltCallback() is executed and user can - add his own code by customization of function pointer @ref HAL_I2C_MasterRxCpltCallback() - (+) Transmit in slave mode an amount of data in non-blocking mode using @ref HAL_I2C_Slave_Transmit_IT() - (+) At transmission end of transfer, @ref HAL_I2C_SlaveTxCpltCallback() is executed and user can - add his own code by customization of function pointer @ref HAL_I2C_SlaveTxCpltCallback() - (+) Receive in slave mode an amount of data in non-blocking mode using @ref HAL_I2C_Slave_Receive_IT() - (+) At reception end of transfer, @ref HAL_I2C_SlaveRxCpltCallback() is executed and user can - add his own code by customization of function pointer @ref HAL_I2C_SlaveRxCpltCallback() - (+) In case of transfer Error, @ref HAL_I2C_ErrorCallback() function is executed and user can - add his own code by customization of function pointer @ref HAL_I2C_ErrorCallback() - (+) Abort a master I2C process communication with Interrupt using @ref HAL_I2C_Master_Abort_IT() - (+) End of abort process, @ref HAL_I2C_AbortCpltCallback() is executed and user can - add his own code by customization of function pointer @ref HAL_I2C_AbortCpltCallback() - (+) Discard a slave I2C process communication using @ref __HAL_I2C_GENERATE_NACK() macro. - This action will inform Master to generate a Stop condition to discard the communication. - - - *** Interrupt mode or DMA mode IO sequential operation *** - ========================================================== - [..] - (@) These interfaces allow to manage a sequential transfer with a repeated start condition - when a direction change during transfer - [..] - (+) A specific option field manage the different steps of a sequential transfer - (+) Option field values are defined through @ref I2C_XFEROPTIONS and are listed below: - (++) I2C_FIRST_AND_LAST_FRAME: No sequential usage, functionnal is same as associated interfaces in no sequential mode - (++) I2C_FIRST_FRAME: Sequential usage, this option allow to manage a sequence with start condition, address - and data to transfer without a final stop condition - (++) I2C_FIRST_AND_NEXT_FRAME: Sequential usage (Master only), this option allow to manage a sequence with start condition, address - and data to transfer without a final stop condition, an then permit a call the same master sequential interface - several times (like @ref HAL_I2C_Master_Seq_Transmit_IT() then @ref HAL_I2C_Master_Seq_Transmit_IT() - or @ref HAL_I2C_Master_Seq_Transmit_DMA() then @ref HAL_I2C_Master_Seq_Transmit_DMA()) - (++) I2C_NEXT_FRAME: Sequential usage, this option allow to manage a sequence with a restart condition, address - and with new data to transfer if the direction change or manage only the new data to transfer - if no direction change and without a final stop condition in both cases - (++) I2C_LAST_FRAME: Sequential usage, this option allow to manage a sequance with a restart condition, address - and with new data to transfer if the direction change or manage only the new data to transfer - if no direction change and with a final stop condition in both cases - (++) I2C_LAST_FRAME_NO_STOP: Sequential usage (Master only), this option allow to manage a restart condition after several call of the same master sequential - interface several times (link with option I2C_FIRST_AND_NEXT_FRAME). - Usage can, transfer several bytes one by one using HAL_I2C_Master_Seq_Transmit_IT(option I2C_FIRST_AND_NEXT_FRAME then I2C_NEXT_FRAME) - or HAL_I2C_Master_Seq_Receive_IT(option I2C_FIRST_AND_NEXT_FRAME then I2C_NEXT_FRAME) - or HAL_I2C_Master_Seq_Transmit_DMA(option I2C_FIRST_AND_NEXT_FRAME then I2C_NEXT_FRAME) - or HAL_I2C_Master_Seq_Receive_DMA(option I2C_FIRST_AND_NEXT_FRAME then I2C_NEXT_FRAME). - Then usage of this option I2C_LAST_FRAME_NO_STOP at the last Transmit or Receive sequence permit to call the oposite interface Receive or Transmit - without stopping the communication and so generate a restart condition. - (++) I2C_OTHER_FRAME: Sequential usage (Master only), this option allow to manage a restart condition after each call of the same master sequential - interface. - Usage can, transfer several bytes one by one with a restart with slave address between each bytes using HAL_I2C_Master_Seq_Transmit_IT(option I2C_FIRST_FRAME then I2C_OTHER_FRAME) - or HAL_I2C_Master_Seq_Receive_IT(option I2C_FIRST_FRAME then I2C_OTHER_FRAME) - or HAL_I2C_Master_Seq_Transmit_DMA(option I2C_FIRST_FRAME then I2C_OTHER_FRAME) - or HAL_I2C_Master_Seq_Receive_DMA(option I2C_FIRST_FRAME then I2C_OTHER_FRAME). - Then usage of this option I2C_OTHER_AND_LAST_FRAME at the last frame to help automatic generation of STOP condition. - - (+) Differents sequential I2C interfaces are listed below: - (++) Sequential transmit in master I2C mode an amount of data in non-blocking mode using @ref HAL_I2C_Master_Seq_Transmit_IT() - or using @ref HAL_I2C_Master_Seq_Transmit_DMA() - (+++) At transmission end of current frame transfer, @ref HAL_I2C_MasterTxCpltCallback() is executed and user can - add his own code by customization of function pointer @ref HAL_I2C_MasterTxCpltCallback() - (++) Sequential receive in master I2C mode an amount of data in non-blocking mode using @ref HAL_I2C_Master_Seq_Receive_IT() - or using @ref HAL_I2C_Master_Seq_Receive_DMA() - (+++) At reception end of current frame transfer, @ref HAL_I2C_MasterRxCpltCallback() is executed and user can - add his own code by customization of function pointer @ref HAL_I2C_MasterRxCpltCallback() - (++) Abort a master IT or DMA I2C process communication with Interrupt using @ref HAL_I2C_Master_Abort_IT() - (+++) End of abort process, @ref HAL_I2C_AbortCpltCallback() is executed and user can - add his own code by customization of function pointer @ref HAL_I2C_AbortCpltCallback() - (++) Enable/disable the Address listen mode in slave I2C mode using @ref HAL_I2C_EnableListen_IT() @ref HAL_I2C_DisableListen_IT() - (+++) When address slave I2C match, @ref HAL_I2C_AddrCallback() is executed and user can - add his own code to check the Address Match Code and the transmission direction request by master (Write/Read). - (+++) At Listen mode end @ref HAL_I2C_ListenCpltCallback() is executed and user can - add his own code by customization of function pointer @ref HAL_I2C_ListenCpltCallback() - (++) Sequential transmit in slave I2C mode an amount of data in non-blocking mode using @ref HAL_I2C_Slave_Seq_Transmit_IT() - or using @ref HAL_I2C_Slave_Seq_Transmit_DMA() - (+++) At transmission end of current frame transfer, @ref HAL_I2C_SlaveTxCpltCallback() is executed and user can - add his own code by customization of function pointer @ref HAL_I2C_SlaveTxCpltCallback() - (++) Sequential receive in slave I2C mode an amount of data in non-blocking mode using @ref HAL_I2C_Slave_Seq_Receive_IT() - or using @ref HAL_I2C_Slave_Seq_Receive_DMA() - (+++) At reception end of current frame transfer, @ref HAL_I2C_SlaveRxCpltCallback() is executed and user can - add his own code by customization of function pointer @ref HAL_I2C_SlaveRxCpltCallback() - (++) In case of transfer Error, @ref HAL_I2C_ErrorCallback() function is executed and user can - add his own code by customization of function pointer @ref HAL_I2C_ErrorCallback() - (++) Discard a slave I2C process communication using @ref __HAL_I2C_GENERATE_NACK() macro. - This action will inform Master to generate a Stop condition to discard the communication. - - *** Interrupt mode IO MEM operation *** - ======================================= - [..] - (+) Write an amount of data in non-blocking mode with Interrupt to a specific memory address using - @ref HAL_I2C_Mem_Write_IT() - (+) At Memory end of write transfer, @ref HAL_I2C_MemTxCpltCallback() is executed and user can - add his own code by customization of function pointer @ref HAL_I2C_MemTxCpltCallback() - (+) Read an amount of data in non-blocking mode with Interrupt from a specific memory address using - @ref HAL_I2C_Mem_Read_IT() - (+) At Memory end of read transfer, @ref HAL_I2C_MemRxCpltCallback() is executed and user can - add his own code by customization of function pointer @ref HAL_I2C_MemRxCpltCallback() - (+) In case of transfer Error, @ref HAL_I2C_ErrorCallback() function is executed and user can - add his own code by customization of function pointer @ref HAL_I2C_ErrorCallback() - - *** DMA mode IO operation *** - ============================== - [..] - (+) Transmit in master mode an amount of data in non-blocking mode (DMA) using - @ref HAL_I2C_Master_Transmit_DMA() - (+) At transmission end of transfer, @ref HAL_I2C_MasterTxCpltCallback() is executed and user can - add his own code by customization of function pointer @ref HAL_I2C_MasterTxCpltCallback() - (+) Receive in master mode an amount of data in non-blocking mode (DMA) using - @ref HAL_I2C_Master_Receive_DMA() - (+) At reception end of transfer, @ref HAL_I2C_MasterRxCpltCallback() is executed and user can - add his own code by customization of function pointer @ref HAL_I2C_MasterRxCpltCallback() - (+) Transmit in slave mode an amount of data in non-blocking mode (DMA) using - @ref HAL_I2C_Slave_Transmit_DMA() - (+) At transmission end of transfer, @ref HAL_I2C_SlaveTxCpltCallback() is executed and user can - add his own code by customization of function pointer @ref HAL_I2C_SlaveTxCpltCallback() - (+) Receive in slave mode an amount of data in non-blocking mode (DMA) using - @ref HAL_I2C_Slave_Receive_DMA() - (+) At reception end of transfer, @ref HAL_I2C_SlaveRxCpltCallback() is executed and user can - add his own code by customization of function pointer @ref HAL_I2C_SlaveRxCpltCallback() - (+) In case of transfer Error, @ref HAL_I2C_ErrorCallback() function is executed and user can - add his own code by customization of function pointer @ref HAL_I2C_ErrorCallback() - (+) Abort a master I2C process communication with Interrupt using @ref HAL_I2C_Master_Abort_IT() - (+) End of abort process, @ref HAL_I2C_AbortCpltCallback() is executed and user can - add his own code by customization of function pointer @ref HAL_I2C_AbortCpltCallback() - (+) Discard a slave I2C process communication using @ref __HAL_I2C_GENERATE_NACK() macro. - This action will inform Master to generate a Stop condition to discard the communication. - - *** DMA mode IO MEM operation *** - ================================= - [..] - (+) Write an amount of data in non-blocking mode with DMA to a specific memory address using - @ref HAL_I2C_Mem_Write_DMA() - (+) At Memory end of write transfer, @ref HAL_I2C_MemTxCpltCallback() is executed and user can - add his own code by customization of function pointer @ref HAL_I2C_MemTxCpltCallback() - (+) Read an amount of data in non-blocking mode with DMA from a specific memory address using - @ref HAL_I2C_Mem_Read_DMA() - (+) At Memory end of read transfer, @ref HAL_I2C_MemRxCpltCallback() is executed and user can - add his own code by customization of function pointer @ref HAL_I2C_MemRxCpltCallback() - (+) In case of transfer Error, @ref HAL_I2C_ErrorCallback() function is executed and user can - add his own code by customization of function pointer @ref HAL_I2C_ErrorCallback() - - - *** I2C HAL driver macros list *** - ================================== - [..] - Below the list of most used macros in I2C HAL driver. - - (+) @ref __HAL_I2C_ENABLE: Enable the I2C peripheral - (+) @ref __HAL_I2C_DISABLE: Disable the I2C peripheral - (+) @ref __HAL_I2C_GENERATE_NACK: Generate a Non-Acknowledge I2C peripheral in Slave mode - (+) @ref __HAL_I2C_GET_FLAG: Check whether the specified I2C flag is set or not - (+) @ref __HAL_I2C_CLEAR_FLAG: Clear the specified I2C pending flag - (+) @ref __HAL_I2C_ENABLE_IT: Enable the specified I2C interrupt - (+) @ref __HAL_I2C_DISABLE_IT: Disable the specified I2C interrupt - - *** Callback registration *** - ============================================= - - The compilation flag USE_HAL_I2C_REGISTER_CALLBACKS when set to 1 - allows the user to configure dynamically the driver callbacks. - Use Functions @ref HAL_I2C_RegisterCallback() or @ref HAL_I2C_RegisterAddrCallback() - to register an interrupt callback. - - Function @ref HAL_I2C_RegisterCallback() allows to register following callbacks: - (+) MasterTxCpltCallback : callback for Master transmission end of transfer. - (+) MasterRxCpltCallback : callback for Master reception end of transfer. - (+) SlaveTxCpltCallback : callback for Slave transmission end of transfer. - (+) SlaveRxCpltCallback : callback for Slave reception end of transfer. - (+) ListenCpltCallback : callback for end of listen mode. - (+) MemTxCpltCallback : callback for Memory transmission end of transfer. - (+) MemRxCpltCallback : callback for Memory reception end of transfer. - (+) ErrorCallback : callback for error detection. - (+) AbortCpltCallback : callback for abort completion process. - (+) MspInitCallback : callback for Msp Init. - (+) MspDeInitCallback : callback for Msp DeInit. - This function takes as parameters the HAL peripheral handle, the Callback ID - and a pointer to the user callback function. - - For specific callback AddrCallback use dedicated register callbacks : @ref HAL_I2C_RegisterAddrCallback(). - - Use function @ref HAL_I2C_UnRegisterCallback to reset a callback to the default - weak function. - @ref HAL_I2C_UnRegisterCallback takes as parameters the HAL peripheral handle, - and the Callback ID. - This function allows to reset following callbacks: - (+) MasterTxCpltCallback : callback for Master transmission end of transfer. - (+) MasterRxCpltCallback : callback for Master reception end of transfer. - (+) SlaveTxCpltCallback : callback for Slave transmission end of transfer. - (+) SlaveRxCpltCallback : callback for Slave reception end of transfer. - (+) ListenCpltCallback : callback for end of listen mode. - (+) MemTxCpltCallback : callback for Memory transmission end of transfer. - (+) MemRxCpltCallback : callback for Memory reception end of transfer. - (+) ErrorCallback : callback for error detection. - (+) AbortCpltCallback : callback for abort completion process. - (+) MspInitCallback : callback for Msp Init. - (+) MspDeInitCallback : callback for Msp DeInit. - - For callback AddrCallback use dedicated register callbacks : @ref HAL_I2C_UnRegisterAddrCallback(). - - By default, after the @ref HAL_I2C_Init() and when the state is @ref HAL_I2C_STATE_RESET - all callbacks are set to the corresponding weak functions: - examples @ref HAL_I2C_MasterTxCpltCallback(), @ref HAL_I2C_MasterRxCpltCallback(). - Exception done for MspInit and MspDeInit functions that are - reset to the legacy weak functions in the @ref HAL_I2C_Init()/ @ref HAL_I2C_DeInit() only when - these callbacks are null (not registered beforehand). - If MspInit or MspDeInit are not null, the @ref HAL_I2C_Init()/ @ref HAL_I2C_DeInit() - keep and use the user MspInit/MspDeInit callbacks (registered beforehand) whatever the state. - - Callbacks can be registered/unregistered in @ref HAL_I2C_STATE_READY state only. - Exception done MspInit/MspDeInit functions that can be registered/unregistered - in @ref HAL_I2C_STATE_READY or @ref HAL_I2C_STATE_RESET state, - thus registered (user) MspInit/DeInit callbacks can be used during the Init/DeInit. - Then, the user first registers the MspInit/MspDeInit user callbacks - using @ref HAL_I2C_RegisterCallback() before calling @ref HAL_I2C_DeInit() - or @ref HAL_I2C_Init() function. - - When the compilation flag USE_HAL_I2C_REGISTER_CALLBACKS is set to 0 or - not defined, the callback registration feature is not available and all callbacks - are set to the corresponding weak functions. - - [..] - (@) You can refer to the I2C HAL driver header file for more useful macros - - @endverbatim - ****************************************************************************** - * @attention - * - *

© Copyright (c) 2017 STMicroelectronics. - * All rights reserved.

- * - * This software component is licensed by ST under BSD 3-Clause license, - * the "License"; You may not use this file except in compliance with the - * License. You may obtain a copy of the License at: - * opensource.org/licenses/BSD-3-Clause - * - ****************************************************************************** - */ - -/* Includes ------------------------------------------------------------------*/ -#include "stm32f7xx_hal.h" - -/** @addtogroup STM32F7xx_HAL_Driver - * @{ - */ - -/** @defgroup I2C I2C - * @brief I2C HAL module driver - * @{ - */ - -#ifdef HAL_I2C_MODULE_ENABLED - -/* Private typedef -----------------------------------------------------------*/ -/* Private define ------------------------------------------------------------*/ - -/** @defgroup I2C_Private_Define I2C Private Define - * @{ - */ -#define TIMING_CLEAR_MASK (0xF0FFFFFFU) /*!< I2C TIMING clear register Mask */ -#define I2C_TIMEOUT_ADDR (10000U) /*!< 10 s */ -#define I2C_TIMEOUT_BUSY (25U) /*!< 25 ms */ -#define I2C_TIMEOUT_DIR (25U) /*!< 25 ms */ -#define I2C_TIMEOUT_RXNE (25U) /*!< 25 ms */ -#define I2C_TIMEOUT_STOPF (25U) /*!< 25 ms */ -#define I2C_TIMEOUT_TC (25U) /*!< 25 ms */ -#define I2C_TIMEOUT_TCR (25U) /*!< 25 ms */ -#define I2C_TIMEOUT_TXIS (25U) /*!< 25 ms */ -#define I2C_TIMEOUT_FLAG (25U) /*!< 25 ms */ - -#define MAX_NBYTE_SIZE 255U -#define SlaveAddr_SHIFT 7U -#define SlaveAddr_MSK 0x06U - -/* Private define for @ref PreviousState usage */ -#define I2C_STATE_MSK ((uint32_t)((uint32_t)((uint32_t)HAL_I2C_STATE_BUSY_TX | (uint32_t)HAL_I2C_STATE_BUSY_RX) & (uint32_t)(~((uint32_t)HAL_I2C_STATE_READY)))) /*!< Mask State define, keep only RX and TX bits */ -#define I2C_STATE_NONE ((uint32_t)(HAL_I2C_MODE_NONE)) /*!< Default Value */ -#define I2C_STATE_MASTER_BUSY_TX ((uint32_t)(((uint32_t)HAL_I2C_STATE_BUSY_TX & I2C_STATE_MSK) | (uint32_t)HAL_I2C_MODE_MASTER)) /*!< Master Busy TX, combinaison of State LSB and Mode enum */ -#define I2C_STATE_MASTER_BUSY_RX ((uint32_t)(((uint32_t)HAL_I2C_STATE_BUSY_RX & I2C_STATE_MSK) | (uint32_t)HAL_I2C_MODE_MASTER)) /*!< Master Busy RX, combinaison of State LSB and Mode enum */ -#define I2C_STATE_SLAVE_BUSY_TX ((uint32_t)(((uint32_t)HAL_I2C_STATE_BUSY_TX & I2C_STATE_MSK) | (uint32_t)HAL_I2C_MODE_SLAVE)) /*!< Slave Busy TX, combinaison of State LSB and Mode enum */ -#define I2C_STATE_SLAVE_BUSY_RX ((uint32_t)(((uint32_t)HAL_I2C_STATE_BUSY_RX & I2C_STATE_MSK) | (uint32_t)HAL_I2C_MODE_SLAVE)) /*!< Slave Busy RX, combinaison of State LSB and Mode enum */ -#define I2C_STATE_MEM_BUSY_TX ((uint32_t)(((uint32_t)HAL_I2C_STATE_BUSY_TX & I2C_STATE_MSK) | (uint32_t)HAL_I2C_MODE_MEM)) /*!< Memory Busy TX, combinaison of State LSB and Mode enum */ -#define I2C_STATE_MEM_BUSY_RX ((uint32_t)(((uint32_t)HAL_I2C_STATE_BUSY_RX & I2C_STATE_MSK) | (uint32_t)HAL_I2C_MODE_MEM)) /*!< Memory Busy RX, combinaison of State LSB and Mode enum */ - - -/* Private define to centralize the enable/disable of Interrupts */ -#define I2C_XFER_TX_IT (0x00000001U) -#define I2C_XFER_RX_IT (0x00000002U) -#define I2C_XFER_LISTEN_IT (0x00000004U) - -#define I2C_XFER_ERROR_IT (0x00000011U) -#define I2C_XFER_CPLT_IT (0x00000012U) -#define I2C_XFER_RELOAD_IT (0x00000012U) - -/* Private define Sequential Transfer Options default/reset value */ -#define I2C_NO_OPTION_FRAME (0xFFFF0000U) -/** - * @} - */ - -/* Private macro -------------------------------------------------------------*/ -/* Private variables ---------------------------------------------------------*/ -/* Private function prototypes -----------------------------------------------*/ - -/** @defgroup I2C_Private_Functions I2C Private Functions - * @{ - */ -/* Private functions to handle DMA transfer */ -static void I2C_DMAMasterTransmitCplt(DMA_HandleTypeDef *hdma); -static void I2C_DMAMasterReceiveCplt(DMA_HandleTypeDef *hdma); -static void I2C_DMASlaveTransmitCplt(DMA_HandleTypeDef *hdma); -static void I2C_DMASlaveReceiveCplt(DMA_HandleTypeDef *hdma); -static void I2C_DMAError(DMA_HandleTypeDef *hdma); -static void I2C_DMAAbort(DMA_HandleTypeDef *hdma); - -/* Private functions to handle IT transfer */ -static void I2C_ITAddrCplt(I2C_HandleTypeDef *hi2c, uint32_t ITFlags); -static void I2C_ITMasterSeqCplt(I2C_HandleTypeDef *hi2c); -static void I2C_ITSlaveSeqCplt(I2C_HandleTypeDef *hi2c); -static void I2C_ITMasterCplt(I2C_HandleTypeDef *hi2c, uint32_t ITFlags); -static void I2C_ITSlaveCplt(I2C_HandleTypeDef *hi2c, uint32_t ITFlags); -static void I2C_ITListenCplt(I2C_HandleTypeDef *hi2c, uint32_t ITFlags); -static void I2C_ITError(I2C_HandleTypeDef *hi2c, uint32_t ErrorCode); - -/* Private functions to handle IT transfer */ -static HAL_StatusTypeDef I2C_RequestMemoryWrite(I2C_HandleTypeDef *hi2c, uint16_t DevAddress, uint16_t MemAddress, uint16_t MemAddSize, uint32_t Timeout, uint32_t Tickstart); -static HAL_StatusTypeDef I2C_RequestMemoryRead(I2C_HandleTypeDef *hi2c, uint16_t DevAddress, uint16_t MemAddress, uint16_t MemAddSize, uint32_t Timeout, uint32_t Tickstart); - -/* Private functions for I2C transfer IRQ handler */ -static HAL_StatusTypeDef I2C_Master_ISR_IT(struct __I2C_HandleTypeDef *hi2c, uint32_t ITFlags, uint32_t ITSources); -static HAL_StatusTypeDef I2C_Slave_ISR_IT(struct __I2C_HandleTypeDef *hi2c, uint32_t ITFlags, uint32_t ITSources); -static HAL_StatusTypeDef I2C_Master_ISR_DMA(struct __I2C_HandleTypeDef *hi2c, uint32_t ITFlags, uint32_t ITSources); -static HAL_StatusTypeDef I2C_Slave_ISR_DMA(struct __I2C_HandleTypeDef *hi2c, uint32_t ITFlags, uint32_t ITSources); - -/* Private functions to handle flags during polling transfer */ -static HAL_StatusTypeDef I2C_WaitOnFlagUntilTimeout(I2C_HandleTypeDef *hi2c, uint32_t Flag, FlagStatus Status, uint32_t Timeout, uint32_t Tickstart); -static HAL_StatusTypeDef I2C_WaitOnTXISFlagUntilTimeout(I2C_HandleTypeDef *hi2c, uint32_t Timeout, uint32_t Tickstart); -static HAL_StatusTypeDef I2C_WaitOnRXNEFlagUntilTimeout(I2C_HandleTypeDef *hi2c, uint32_t Timeout, uint32_t Tickstart); -static HAL_StatusTypeDef I2C_WaitOnSTOPFlagUntilTimeout(I2C_HandleTypeDef *hi2c, uint32_t Timeout, uint32_t Tickstart); -static HAL_StatusTypeDef I2C_IsAcknowledgeFailed(I2C_HandleTypeDef *hi2c, uint32_t Timeout, uint32_t Tickstart); - -/* Private functions to centralize the enable/disable of Interrupts */ -static void I2C_Enable_IRQ(I2C_HandleTypeDef *hi2c, uint16_t InterruptRequest); -static void I2C_Disable_IRQ(I2C_HandleTypeDef *hi2c, uint16_t InterruptRequest); - -/* Private function to flush TXDR register */ -static void I2C_Flush_TXDR(I2C_HandleTypeDef *hi2c); - -/* Private function to handle start, restart or stop a transfer */ -static void I2C_TransferConfig(I2C_HandleTypeDef *hi2c, uint16_t DevAddress, uint8_t Size, uint32_t Mode, uint32_t Request); - -/* Private function to Convert Specific options */ -static void I2C_ConvertOtherXferOptions(I2C_HandleTypeDef *hi2c); -/** - * @} - */ - -/* Exported functions --------------------------------------------------------*/ - -/** @defgroup I2C_Exported_Functions I2C Exported Functions - * @{ - */ - -/** @defgroup I2C_Exported_Functions_Group1 Initialization and de-initialization functions - * @brief Initialization and Configuration functions - * -@verbatim - =============================================================================== - ##### Initialization and de-initialization functions ##### - =============================================================================== - [..] This subsection provides a set of functions allowing to initialize and - deinitialize the I2Cx peripheral: - - (+) User must Implement HAL_I2C_MspInit() function in which he configures - all related peripherals resources (CLOCK, GPIO, DMA, IT and NVIC ). - - (+) Call the function HAL_I2C_Init() to configure the selected device with - the selected configuration: - (++) Clock Timing - (++) Own Address 1 - (++) Addressing mode (Master, Slave) - (++) Dual Addressing mode - (++) Own Address 2 - (++) Own Address 2 Mask - (++) General call mode - (++) Nostretch mode - - (+) Call the function HAL_I2C_DeInit() to restore the default configuration - of the selected I2Cx peripheral. - -@endverbatim - * @{ - */ - -/** - * @brief Initializes the I2C according to the specified parameters - * in the I2C_InitTypeDef and initialize the associated handle. - * @param hi2c Pointer to a I2C_HandleTypeDef structure that contains - * the configuration information for the specified I2C. - * @retval HAL status - */ -HAL_StatusTypeDef HAL_I2C_Init(I2C_HandleTypeDef *hi2c) -{ - /* Check the I2C handle allocation */ - if (hi2c == NULL) - { - return HAL_ERROR; - } - - /* Check the parameters */ - assert_param(IS_I2C_ALL_INSTANCE(hi2c->Instance)); - assert_param(IS_I2C_OWN_ADDRESS1(hi2c->Init.OwnAddress1)); - assert_param(IS_I2C_ADDRESSING_MODE(hi2c->Init.AddressingMode)); - assert_param(IS_I2C_DUAL_ADDRESS(hi2c->Init.DualAddressMode)); - assert_param(IS_I2C_OWN_ADDRESS2(hi2c->Init.OwnAddress2)); - assert_param(IS_I2C_OWN_ADDRESS2_MASK(hi2c->Init.OwnAddress2Masks)); - assert_param(IS_I2C_GENERAL_CALL(hi2c->Init.GeneralCallMode)); - assert_param(IS_I2C_NO_STRETCH(hi2c->Init.NoStretchMode)); - - if (hi2c->State == HAL_I2C_STATE_RESET) - { - /* Allocate lock resource and initialize it */ - hi2c->Lock = HAL_UNLOCKED; - -#if (USE_HAL_I2C_REGISTER_CALLBACKS == 1) - /* Init the I2C Callback settings */ - hi2c->MasterTxCpltCallback = HAL_I2C_MasterTxCpltCallback; /* Legacy weak MasterTxCpltCallback */ - hi2c->MasterRxCpltCallback = HAL_I2C_MasterRxCpltCallback; /* Legacy weak MasterRxCpltCallback */ - hi2c->SlaveTxCpltCallback = HAL_I2C_SlaveTxCpltCallback; /* Legacy weak SlaveTxCpltCallback */ - hi2c->SlaveRxCpltCallback = HAL_I2C_SlaveRxCpltCallback; /* Legacy weak SlaveRxCpltCallback */ - hi2c->ListenCpltCallback = HAL_I2C_ListenCpltCallback; /* Legacy weak ListenCpltCallback */ - hi2c->MemTxCpltCallback = HAL_I2C_MemTxCpltCallback; /* Legacy weak MemTxCpltCallback */ - hi2c->MemRxCpltCallback = HAL_I2C_MemRxCpltCallback; /* Legacy weak MemRxCpltCallback */ - hi2c->ErrorCallback = HAL_I2C_ErrorCallback; /* Legacy weak ErrorCallback */ - hi2c->AbortCpltCallback = HAL_I2C_AbortCpltCallback; /* Legacy weak AbortCpltCallback */ - hi2c->AddrCallback = HAL_I2C_AddrCallback; /* Legacy weak AddrCallback */ - - if (hi2c->MspInitCallback == NULL) - { - hi2c->MspInitCallback = HAL_I2C_MspInit; /* Legacy weak MspInit */ - } - - /* Init the low level hardware : GPIO, CLOCK, CORTEX...etc */ - hi2c->MspInitCallback(hi2c); -#else - /* Init the low level hardware : GPIO, CLOCK, CORTEX...etc */ - HAL_I2C_MspInit(hi2c); -#endif /* USE_HAL_I2C_REGISTER_CALLBACKS */ - } - - hi2c->State = HAL_I2C_STATE_BUSY; - - /* Disable the selected I2C peripheral */ - __HAL_I2C_DISABLE(hi2c); - - /*---------------------------- I2Cx TIMINGR Configuration ------------------*/ - /* Configure I2Cx: Frequency range */ - hi2c->Instance->TIMINGR = hi2c->Init.Timing & TIMING_CLEAR_MASK; - - /*---------------------------- I2Cx OAR1 Configuration ---------------------*/ - /* Disable Own Address1 before set the Own Address1 configuration */ - hi2c->Instance->OAR1 &= ~I2C_OAR1_OA1EN; - - /* Configure I2Cx: Own Address1 and ack own address1 mode */ - if (hi2c->Init.AddressingMode == I2C_ADDRESSINGMODE_7BIT) - { - hi2c->Instance->OAR1 = (I2C_OAR1_OA1EN | hi2c->Init.OwnAddress1); - } - else /* I2C_ADDRESSINGMODE_10BIT */ - { - hi2c->Instance->OAR1 = (I2C_OAR1_OA1EN | I2C_OAR1_OA1MODE | hi2c->Init.OwnAddress1); - } - - /*---------------------------- I2Cx CR2 Configuration ----------------------*/ - /* Configure I2Cx: Addressing Master mode */ - if (hi2c->Init.AddressingMode == I2C_ADDRESSINGMODE_10BIT) - { - hi2c->Instance->CR2 = (I2C_CR2_ADD10); - } - /* Enable the AUTOEND by default, and enable NACK (should be disable only during Slave process */ - hi2c->Instance->CR2 |= (I2C_CR2_AUTOEND | I2C_CR2_NACK); - - /*---------------------------- I2Cx OAR2 Configuration ---------------------*/ - /* Disable Own Address2 before set the Own Address2 configuration */ - hi2c->Instance->OAR2 &= ~I2C_DUALADDRESS_ENABLE; - - /* Configure I2Cx: Dual mode and Own Address2 */ - hi2c->Instance->OAR2 = (hi2c->Init.DualAddressMode | hi2c->Init.OwnAddress2 | (hi2c->Init.OwnAddress2Masks << 8)); - - /*---------------------------- I2Cx CR1 Configuration ----------------------*/ - /* Configure I2Cx: Generalcall and NoStretch mode */ - hi2c->Instance->CR1 = (hi2c->Init.GeneralCallMode | hi2c->Init.NoStretchMode); - - /* Enable the selected I2C peripheral */ - __HAL_I2C_ENABLE(hi2c); - - hi2c->ErrorCode = HAL_I2C_ERROR_NONE; - hi2c->State = HAL_I2C_STATE_READY; - hi2c->PreviousState = I2C_STATE_NONE; - hi2c->Mode = HAL_I2C_MODE_NONE; - - return HAL_OK; -} - -/** - * @brief DeInitialize the I2C peripheral. - * @param hi2c Pointer to a I2C_HandleTypeDef structure that contains - * the configuration information for the specified I2C. - * @retval HAL status - */ -HAL_StatusTypeDef HAL_I2C_DeInit(I2C_HandleTypeDef *hi2c) -{ - /* Check the I2C handle allocation */ - if (hi2c == NULL) - { - return HAL_ERROR; - } - - /* Check the parameters */ - assert_param(IS_I2C_ALL_INSTANCE(hi2c->Instance)); - - hi2c->State = HAL_I2C_STATE_BUSY; - - /* Disable the I2C Peripheral Clock */ - __HAL_I2C_DISABLE(hi2c); - -#if (USE_HAL_I2C_REGISTER_CALLBACKS == 1) - if (hi2c->MspDeInitCallback == NULL) - { - hi2c->MspDeInitCallback = HAL_I2C_MspDeInit; /* Legacy weak MspDeInit */ - } - - /* DeInit the low level hardware: GPIO, CLOCK, NVIC */ - hi2c->MspDeInitCallback(hi2c); -#else - /* DeInit the low level hardware: GPIO, CLOCK, NVIC */ - HAL_I2C_MspDeInit(hi2c); -#endif /* USE_HAL_I2C_REGISTER_CALLBACKS */ - - hi2c->ErrorCode = HAL_I2C_ERROR_NONE; - hi2c->State = HAL_I2C_STATE_RESET; - hi2c->PreviousState = I2C_STATE_NONE; - hi2c->Mode = HAL_I2C_MODE_NONE; - - /* Release Lock */ - __HAL_UNLOCK(hi2c); - - return HAL_OK; -} - -/** - * @brief Initialize the I2C MSP. - * @param hi2c Pointer to a I2C_HandleTypeDef structure that contains - * the configuration information for the specified I2C. - * @retval None - */ -__weak void HAL_I2C_MspInit(I2C_HandleTypeDef *hi2c) -{ - /* Prevent unused argument(s) compilation warning */ - UNUSED(hi2c); - - /* NOTE : This function should not be modified, when the callback is needed, - the HAL_I2C_MspInit could be implemented in the user file - */ -} - -/** - * @brief DeInitialize the I2C MSP. - * @param hi2c Pointer to a I2C_HandleTypeDef structure that contains - * the configuration information for the specified I2C. - * @retval None - */ -__weak void HAL_I2C_MspDeInit(I2C_HandleTypeDef *hi2c) -{ - /* Prevent unused argument(s) compilation warning */ - UNUSED(hi2c); - - /* NOTE : This function should not be modified, when the callback is needed, - the HAL_I2C_MspDeInit could be implemented in the user file - */ -} - -#if (USE_HAL_I2C_REGISTER_CALLBACKS == 1) -/** - * @brief Register a User I2C Callback - * To be used instead of the weak predefined callback - * @param hi2c Pointer to a I2C_HandleTypeDef structure that contains - * the configuration information for the specified I2C. - * @param CallbackID ID of the callback to be registered - * This parameter can be one of the following values: - * @arg @ref HAL_I2C_MASTER_TX_COMPLETE_CB_ID Master Tx Transfer completed callback ID - * @arg @ref HAL_I2C_MASTER_RX_COMPLETE_CB_ID Master Rx Transfer completed callback ID - * @arg @ref HAL_I2C_SLAVE_TX_COMPLETE_CB_ID Slave Tx Transfer completed callback ID - * @arg @ref HAL_I2C_SLAVE_RX_COMPLETE_CB_ID Slave Rx Transfer completed callback ID - * @arg @ref HAL_I2C_LISTEN_COMPLETE_CB_ID Listen Complete callback ID - * @arg @ref HAL_I2C_MEM_TX_COMPLETE_CB_ID Memory Tx Transfer callback ID - * @arg @ref HAL_I2C_MEM_RX_COMPLETE_CB_ID Memory Rx Transfer completed callback ID - * @arg @ref HAL_I2C_ERROR_CB_ID Error callback ID - * @arg @ref HAL_I2C_ABORT_CB_ID Abort callback ID - * @arg @ref HAL_I2C_MSPINIT_CB_ID MspInit callback ID - * @arg @ref HAL_I2C_MSPDEINIT_CB_ID MspDeInit callback ID - * @param pCallback pointer to the Callback function - * @retval HAL status - */ -HAL_StatusTypeDef HAL_I2C_RegisterCallback(I2C_HandleTypeDef *hi2c, HAL_I2C_CallbackIDTypeDef CallbackID, pI2C_CallbackTypeDef pCallback) -{ - HAL_StatusTypeDef status = HAL_OK; - - if (pCallback == NULL) - { - /* Update the error code */ - hi2c->ErrorCode |= HAL_I2C_ERROR_INVALID_CALLBACK; - - return HAL_ERROR; - } - /* Process locked */ - __HAL_LOCK(hi2c); - - if (HAL_I2C_STATE_READY == hi2c->State) - { - switch (CallbackID) - { - case HAL_I2C_MASTER_TX_COMPLETE_CB_ID : - hi2c->MasterTxCpltCallback = pCallback; - break; - - case HAL_I2C_MASTER_RX_COMPLETE_CB_ID : - hi2c->MasterRxCpltCallback = pCallback; - break; - - case HAL_I2C_SLAVE_TX_COMPLETE_CB_ID : - hi2c->SlaveTxCpltCallback = pCallback; - break; - - case HAL_I2C_SLAVE_RX_COMPLETE_CB_ID : - hi2c->SlaveRxCpltCallback = pCallback; - break; - - case HAL_I2C_LISTEN_COMPLETE_CB_ID : - hi2c->ListenCpltCallback = pCallback; - break; - - case HAL_I2C_MEM_TX_COMPLETE_CB_ID : - hi2c->MemTxCpltCallback = pCallback; - break; - - case HAL_I2C_MEM_RX_COMPLETE_CB_ID : - hi2c->MemRxCpltCallback = pCallback; - break; - - case HAL_I2C_ERROR_CB_ID : - hi2c->ErrorCallback = pCallback; - break; - - case HAL_I2C_ABORT_CB_ID : - hi2c->AbortCpltCallback = pCallback; - break; - - case HAL_I2C_MSPINIT_CB_ID : - hi2c->MspInitCallback = pCallback; - break; - - case HAL_I2C_MSPDEINIT_CB_ID : - hi2c->MspDeInitCallback = pCallback; - break; - - default : - /* Update the error code */ - hi2c->ErrorCode |= HAL_I2C_ERROR_INVALID_CALLBACK; - - /* Return error status */ - status = HAL_ERROR; - break; - } - } - else if (HAL_I2C_STATE_RESET == hi2c->State) - { - switch (CallbackID) - { - case HAL_I2C_MSPINIT_CB_ID : - hi2c->MspInitCallback = pCallback; - break; - - case HAL_I2C_MSPDEINIT_CB_ID : - hi2c->MspDeInitCallback = pCallback; - break; - - default : - /* Update the error code */ - hi2c->ErrorCode |= HAL_I2C_ERROR_INVALID_CALLBACK; - - /* Return error status */ - status = HAL_ERROR; - break; - } - } - else - { - /* Update the error code */ - hi2c->ErrorCode |= HAL_I2C_ERROR_INVALID_CALLBACK; - - /* Return error status */ - status = HAL_ERROR; - } - - /* Release Lock */ - __HAL_UNLOCK(hi2c); - return status; -} - -/** - * @brief Unregister an I2C Callback - * I2C callback is redirected to the weak predefined callback - * @param hi2c Pointer to a I2C_HandleTypeDef structure that contains - * the configuration information for the specified I2C. - * @param CallbackID ID of the callback to be unregistered - * This parameter can be one of the following values: - * This parameter can be one of the following values: - * @arg @ref HAL_I2C_MASTER_TX_COMPLETE_CB_ID Master Tx Transfer completed callback ID - * @arg @ref HAL_I2C_MASTER_RX_COMPLETE_CB_ID Master Rx Transfer completed callback ID - * @arg @ref HAL_I2C_SLAVE_TX_COMPLETE_CB_ID Slave Tx Transfer completed callback ID - * @arg @ref HAL_I2C_SLAVE_RX_COMPLETE_CB_ID Slave Rx Transfer completed callback ID - * @arg @ref HAL_I2C_LISTEN_COMPLETE_CB_ID Listen Complete callback ID - * @arg @ref HAL_I2C_MEM_TX_COMPLETE_CB_ID Memory Tx Transfer callback ID - * @arg @ref HAL_I2C_MEM_RX_COMPLETE_CB_ID Memory Rx Transfer completed callback ID - * @arg @ref HAL_I2C_ERROR_CB_ID Error callback ID - * @arg @ref HAL_I2C_ABORT_CB_ID Abort callback ID - * @arg @ref HAL_I2C_MSPINIT_CB_ID MspInit callback ID - * @arg @ref HAL_I2C_MSPDEINIT_CB_ID MspDeInit callback ID - * @retval HAL status - */ -HAL_StatusTypeDef HAL_I2C_UnRegisterCallback(I2C_HandleTypeDef *hi2c, HAL_I2C_CallbackIDTypeDef CallbackID) -{ - HAL_StatusTypeDef status = HAL_OK; - - /* Process locked */ - __HAL_LOCK(hi2c); - - if (HAL_I2C_STATE_READY == hi2c->State) - { - switch (CallbackID) - { - case HAL_I2C_MASTER_TX_COMPLETE_CB_ID : - hi2c->MasterTxCpltCallback = HAL_I2C_MasterTxCpltCallback; /* Legacy weak MasterTxCpltCallback */ - break; - - case HAL_I2C_MASTER_RX_COMPLETE_CB_ID : - hi2c->MasterRxCpltCallback = HAL_I2C_MasterRxCpltCallback; /* Legacy weak MasterRxCpltCallback */ - break; - - case HAL_I2C_SLAVE_TX_COMPLETE_CB_ID : - hi2c->SlaveTxCpltCallback = HAL_I2C_SlaveTxCpltCallback; /* Legacy weak SlaveTxCpltCallback */ - break; - - case HAL_I2C_SLAVE_RX_COMPLETE_CB_ID : - hi2c->SlaveRxCpltCallback = HAL_I2C_SlaveRxCpltCallback; /* Legacy weak SlaveRxCpltCallback */ - break; - - case HAL_I2C_LISTEN_COMPLETE_CB_ID : - hi2c->ListenCpltCallback = HAL_I2C_ListenCpltCallback; /* Legacy weak ListenCpltCallback */ - break; - - case HAL_I2C_MEM_TX_COMPLETE_CB_ID : - hi2c->MemTxCpltCallback = HAL_I2C_MemTxCpltCallback; /* Legacy weak MemTxCpltCallback */ - break; - - case HAL_I2C_MEM_RX_COMPLETE_CB_ID : - hi2c->MemRxCpltCallback = HAL_I2C_MemRxCpltCallback; /* Legacy weak MemRxCpltCallback */ - break; - - case HAL_I2C_ERROR_CB_ID : - hi2c->ErrorCallback = HAL_I2C_ErrorCallback; /* Legacy weak ErrorCallback */ - break; - - case HAL_I2C_ABORT_CB_ID : - hi2c->AbortCpltCallback = HAL_I2C_AbortCpltCallback; /* Legacy weak AbortCpltCallback */ - break; - - case HAL_I2C_MSPINIT_CB_ID : - hi2c->MspInitCallback = HAL_I2C_MspInit; /* Legacy weak MspInit */ - break; - - case HAL_I2C_MSPDEINIT_CB_ID : - hi2c->MspDeInitCallback = HAL_I2C_MspDeInit; /* Legacy weak MspDeInit */ - break; - - default : - /* Update the error code */ - hi2c->ErrorCode |= HAL_I2C_ERROR_INVALID_CALLBACK; - - /* Return error status */ - status = HAL_ERROR; - break; - } - } - else if (HAL_I2C_STATE_RESET == hi2c->State) - { - switch (CallbackID) - { - case HAL_I2C_MSPINIT_CB_ID : - hi2c->MspInitCallback = HAL_I2C_MspInit; /* Legacy weak MspInit */ - break; - - case HAL_I2C_MSPDEINIT_CB_ID : - hi2c->MspDeInitCallback = HAL_I2C_MspDeInit; /* Legacy weak MspDeInit */ - break; - - default : - /* Update the error code */ - hi2c->ErrorCode |= HAL_I2C_ERROR_INVALID_CALLBACK; - - /* Return error status */ - status = HAL_ERROR; - break; - } - } - else - { - /* Update the error code */ - hi2c->ErrorCode |= HAL_I2C_ERROR_INVALID_CALLBACK; - - /* Return error status */ - status = HAL_ERROR; - } - - /* Release Lock */ - __HAL_UNLOCK(hi2c); - return status; -} - -/** - * @brief Register the Slave Address Match I2C Callback - * To be used instead of the weak HAL_I2C_AddrCallback() predefined callback - * @param hi2c Pointer to a I2C_HandleTypeDef structure that contains - * the configuration information for the specified I2C. - * @param pCallback pointer to the Address Match Callback function - * @retval HAL status - */ -HAL_StatusTypeDef HAL_I2C_RegisterAddrCallback(I2C_HandleTypeDef *hi2c, pI2C_AddrCallbackTypeDef pCallback) -{ - HAL_StatusTypeDef status = HAL_OK; - - if (pCallback == NULL) - { - /* Update the error code */ - hi2c->ErrorCode |= HAL_I2C_ERROR_INVALID_CALLBACK; - - return HAL_ERROR; - } - /* Process locked */ - __HAL_LOCK(hi2c); - - if (HAL_I2C_STATE_READY == hi2c->State) - { - hi2c->AddrCallback = pCallback; - } - else - { - /* Update the error code */ - hi2c->ErrorCode |= HAL_I2C_ERROR_INVALID_CALLBACK; - - /* Return error status */ - status = HAL_ERROR; - } - - /* Release Lock */ - __HAL_UNLOCK(hi2c); - return status; -} - -/** - * @brief UnRegister the Slave Address Match I2C Callback - * Info Ready I2C Callback is redirected to the weak HAL_I2C_AddrCallback() predefined callback - * @param hi2c Pointer to a I2C_HandleTypeDef structure that contains - * the configuration information for the specified I2C. - * @retval HAL status - */ -HAL_StatusTypeDef HAL_I2C_UnRegisterAddrCallback(I2C_HandleTypeDef *hi2c) -{ - HAL_StatusTypeDef status = HAL_OK; - - /* Process locked */ - __HAL_LOCK(hi2c); - - if (HAL_I2C_STATE_READY == hi2c->State) - { - hi2c->AddrCallback = HAL_I2C_AddrCallback; /* Legacy weak AddrCallback */ - } - else - { - /* Update the error code */ - hi2c->ErrorCode |= HAL_I2C_ERROR_INVALID_CALLBACK; - - /* Return error status */ - status = HAL_ERROR; - } - - /* Release Lock */ - __HAL_UNLOCK(hi2c); - return status; -} - -#endif /* USE_HAL_I2C_REGISTER_CALLBACKS */ - -/** - * @} - */ - -/** @defgroup I2C_Exported_Functions_Group2 Input and Output operation functions - * @brief Data transfers functions - * -@verbatim - =============================================================================== - ##### IO operation functions ##### - =============================================================================== - [..] - This subsection provides a set of functions allowing to manage the I2C data - transfers. - - (#) There are two modes of transfer: - (++) Blocking mode : The communication is performed in the polling mode. - The status of all data processing is returned by the same function - after finishing transfer. - (++) No-Blocking mode : The communication is performed using Interrupts - or DMA. These functions return the status of the transfer startup. - The end of the data processing will be indicated through the - dedicated I2C IRQ when using Interrupt mode or the DMA IRQ when - using DMA mode. - - (#) Blocking mode functions are : - (++) HAL_I2C_Master_Transmit() - (++) HAL_I2C_Master_Receive() - (++) HAL_I2C_Slave_Transmit() - (++) HAL_I2C_Slave_Receive() - (++) HAL_I2C_Mem_Write() - (++) HAL_I2C_Mem_Read() - (++) HAL_I2C_IsDeviceReady() - - (#) No-Blocking mode functions with Interrupt are : - (++) HAL_I2C_Master_Transmit_IT() - (++) HAL_I2C_Master_Receive_IT() - (++) HAL_I2C_Slave_Transmit_IT() - (++) HAL_I2C_Slave_Receive_IT() - (++) HAL_I2C_Mem_Write_IT() - (++) HAL_I2C_Mem_Read_IT() - (++) HAL_I2C_Master_Seq_Transmit_IT() - (++) HAL_I2C_Master_Seq_Receive_IT() - (++) HAL_I2C_Slave_Seq_Transmit_IT() - (++) HAL_I2C_Slave_Seq_Receive_IT() - (++) HAL_I2C_EnableListen_IT() - (++) HAL_I2C_DisableListen_IT() - (++) HAL_I2C_Master_Abort_IT() - - (#) No-Blocking mode functions with DMA are : - (++) HAL_I2C_Master_Transmit_DMA() - (++) HAL_I2C_Master_Receive_DMA() - (++) HAL_I2C_Slave_Transmit_DMA() - (++) HAL_I2C_Slave_Receive_DMA() - (++) HAL_I2C_Mem_Write_DMA() - (++) HAL_I2C_Mem_Read_DMA() - (++) HAL_I2C_Master_Seq_Transmit_DMA() - (++) HAL_I2C_Master_Seq_Receive_DMA() - (++) HAL_I2C_Slave_Seq_Transmit_DMA() - (++) HAL_I2C_Slave_Seq_Receive_DMA() - - (#) A set of Transfer Complete Callbacks are provided in non Blocking mode: - (++) HAL_I2C_MasterTxCpltCallback() - (++) HAL_I2C_MasterRxCpltCallback() - (++) HAL_I2C_SlaveTxCpltCallback() - (++) HAL_I2C_SlaveRxCpltCallback() - (++) HAL_I2C_MemTxCpltCallback() - (++) HAL_I2C_MemRxCpltCallback() - (++) HAL_I2C_AddrCallback() - (++) HAL_I2C_ListenCpltCallback() - (++) HAL_I2C_ErrorCallback() - (++) HAL_I2C_AbortCpltCallback() - -@endverbatim - * @{ - */ - -/** - * @brief Transmits in master mode an amount of data in blocking mode. - * @param hi2c Pointer to a I2C_HandleTypeDef structure that contains - * the configuration information for the specified I2C. - * @param DevAddress Target device address: The device 7 bits address value - * in datasheet must be shifted to the left before calling the interface - * @param pData Pointer to data buffer - * @param Size Amount of data to be sent - * @param Timeout Timeout duration - * @retval HAL status - */ -HAL_StatusTypeDef HAL_I2C_Master_Transmit(I2C_HandleTypeDef *hi2c, uint16_t DevAddress, uint8_t *pData, uint16_t Size, uint32_t Timeout) -{ - uint32_t tickstart; - - if (hi2c->State == HAL_I2C_STATE_READY) - { - /* Process Locked */ - __HAL_LOCK(hi2c); - - /* Init tickstart for timeout management*/ - tickstart = HAL_GetTick(); - - if (I2C_WaitOnFlagUntilTimeout(hi2c, I2C_FLAG_BUSY, SET, I2C_TIMEOUT_BUSY, tickstart) != HAL_OK) - { - return HAL_ERROR; - } - - hi2c->State = HAL_I2C_STATE_BUSY_TX; - hi2c->Mode = HAL_I2C_MODE_MASTER; - hi2c->ErrorCode = HAL_I2C_ERROR_NONE; - - /* Prepare transfer parameters */ - hi2c->pBuffPtr = pData; - hi2c->XferCount = Size; - hi2c->XferISR = NULL; - - /* Send Slave Address */ - /* Set NBYTES to write and reload if hi2c->XferCount > MAX_NBYTE_SIZE and generate RESTART */ - if (hi2c->XferCount > MAX_NBYTE_SIZE) - { - hi2c->XferSize = MAX_NBYTE_SIZE; - I2C_TransferConfig(hi2c, DevAddress, (uint8_t)hi2c->XferSize, I2C_RELOAD_MODE, I2C_GENERATE_START_WRITE); - } - else - { - hi2c->XferSize = hi2c->XferCount; - I2C_TransferConfig(hi2c, DevAddress, (uint8_t)hi2c->XferSize, I2C_AUTOEND_MODE, I2C_GENERATE_START_WRITE); - } - - while (hi2c->XferCount > 0U) - { - /* Wait until TXIS flag is set */ - if (I2C_WaitOnTXISFlagUntilTimeout(hi2c, Timeout, tickstart) != HAL_OK) - { - return HAL_ERROR; - } - /* Write data to TXDR */ - hi2c->Instance->TXDR = *hi2c->pBuffPtr; - - /* Increment Buffer pointer */ - hi2c->pBuffPtr++; - - hi2c->XferCount--; - hi2c->XferSize--; - - if ((hi2c->XferCount != 0U) && (hi2c->XferSize == 0U)) - { - /* Wait until TCR flag is set */ - if (I2C_WaitOnFlagUntilTimeout(hi2c, I2C_FLAG_TCR, RESET, Timeout, tickstart) != HAL_OK) - { - return HAL_ERROR; - } - - if (hi2c->XferCount > MAX_NBYTE_SIZE) - { - hi2c->XferSize = MAX_NBYTE_SIZE; - I2C_TransferConfig(hi2c, DevAddress, (uint8_t)hi2c->XferSize, I2C_RELOAD_MODE, I2C_NO_STARTSTOP); - } - else - { - hi2c->XferSize = hi2c->XferCount; - I2C_TransferConfig(hi2c, DevAddress, (uint8_t)hi2c->XferSize, I2C_AUTOEND_MODE, I2C_NO_STARTSTOP); - } - } - } - - /* No need to Check TC flag, with AUTOEND mode the stop is automatically generated */ - /* Wait until STOPF flag is set */ - if (I2C_WaitOnSTOPFlagUntilTimeout(hi2c, Timeout, tickstart) != HAL_OK) - { - return HAL_ERROR; - } - - /* Clear STOP Flag */ - __HAL_I2C_CLEAR_FLAG(hi2c, I2C_FLAG_STOPF); - - /* Clear Configuration Register 2 */ - I2C_RESET_CR2(hi2c); - - hi2c->State = HAL_I2C_STATE_READY; - hi2c->Mode = HAL_I2C_MODE_NONE; - - /* Process Unlocked */ - __HAL_UNLOCK(hi2c); - - return HAL_OK; - } - else - { - return HAL_BUSY; - } -} - -/** - * @brief Receives in master mode an amount of data in blocking mode. - * @param hi2c Pointer to a I2C_HandleTypeDef structure that contains - * the configuration information for the specified I2C. - * @param DevAddress Target device address: The device 7 bits address value - * in datasheet must be shifted to the left before calling the interface - * @param pData Pointer to data buffer - * @param Size Amount of data to be sent - * @param Timeout Timeout duration - * @retval HAL status - */ -HAL_StatusTypeDef HAL_I2C_Master_Receive(I2C_HandleTypeDef *hi2c, uint16_t DevAddress, uint8_t *pData, uint16_t Size, uint32_t Timeout) -{ - uint32_t tickstart; - - if (hi2c->State == HAL_I2C_STATE_READY) - { - /* Process Locked */ - __HAL_LOCK(hi2c); - - /* Init tickstart for timeout management*/ - tickstart = HAL_GetTick(); - - if (I2C_WaitOnFlagUntilTimeout(hi2c, I2C_FLAG_BUSY, SET, I2C_TIMEOUT_BUSY, tickstart) != HAL_OK) - { - return HAL_ERROR; - } - - hi2c->State = HAL_I2C_STATE_BUSY_RX; - hi2c->Mode = HAL_I2C_MODE_MASTER; - hi2c->ErrorCode = HAL_I2C_ERROR_NONE; - - /* Prepare transfer parameters */ - hi2c->pBuffPtr = pData; - hi2c->XferCount = Size; - hi2c->XferISR = NULL; - - /* Send Slave Address */ - /* Set NBYTES to write and reload if hi2c->XferCount > MAX_NBYTE_SIZE and generate RESTART */ - if (hi2c->XferCount > MAX_NBYTE_SIZE) - { - hi2c->XferSize = MAX_NBYTE_SIZE; - I2C_TransferConfig(hi2c, DevAddress, (uint8_t)hi2c->XferSize, I2C_RELOAD_MODE, I2C_GENERATE_START_READ); - } - else - { - hi2c->XferSize = hi2c->XferCount; - I2C_TransferConfig(hi2c, DevAddress, (uint8_t)hi2c->XferSize, I2C_AUTOEND_MODE, I2C_GENERATE_START_READ); - } - - while (hi2c->XferCount > 0U) - { - /* Wait until RXNE flag is set */ - if (I2C_WaitOnRXNEFlagUntilTimeout(hi2c, Timeout, tickstart) != HAL_OK) - { - return HAL_ERROR; - } - - /* Read data from RXDR */ - *hi2c->pBuffPtr = (uint8_t)hi2c->Instance->RXDR; - - /* Increment Buffer pointer */ - hi2c->pBuffPtr++; - - hi2c->XferSize--; - hi2c->XferCount--; - - if ((hi2c->XferCount != 0U) && (hi2c->XferSize == 0U)) - { - /* Wait until TCR flag is set */ - if (I2C_WaitOnFlagUntilTimeout(hi2c, I2C_FLAG_TCR, RESET, Timeout, tickstart) != HAL_OK) - { - return HAL_ERROR; - } - - if (hi2c->XferCount > MAX_NBYTE_SIZE) - { - hi2c->XferSize = MAX_NBYTE_SIZE; - I2C_TransferConfig(hi2c, DevAddress, (uint8_t)hi2c->XferSize, I2C_RELOAD_MODE, I2C_NO_STARTSTOP); - } - else - { - hi2c->XferSize = hi2c->XferCount; - I2C_TransferConfig(hi2c, DevAddress, (uint8_t)hi2c->XferSize, I2C_AUTOEND_MODE, I2C_NO_STARTSTOP); - } - } - } - - /* No need to Check TC flag, with AUTOEND mode the stop is automatically generated */ - /* Wait until STOPF flag is set */ - if (I2C_WaitOnSTOPFlagUntilTimeout(hi2c, Timeout, tickstart) != HAL_OK) - { - return HAL_ERROR; - } - - /* Clear STOP Flag */ - __HAL_I2C_CLEAR_FLAG(hi2c, I2C_FLAG_STOPF); - - /* Clear Configuration Register 2 */ - I2C_RESET_CR2(hi2c); - - hi2c->State = HAL_I2C_STATE_READY; - hi2c->Mode = HAL_I2C_MODE_NONE; - - /* Process Unlocked */ - __HAL_UNLOCK(hi2c); - - return HAL_OK; - } - else - { - return HAL_BUSY; - } -} - -/** - * @brief Transmits in slave mode an amount of data in blocking mode. - * @param hi2c Pointer to a I2C_HandleTypeDef structure that contains - * the configuration information for the specified I2C. - * @param pData Pointer to data buffer - * @param Size Amount of data to be sent - * @param Timeout Timeout duration - * @retval HAL status - */ -HAL_StatusTypeDef HAL_I2C_Slave_Transmit(I2C_HandleTypeDef *hi2c, uint8_t *pData, uint16_t Size, uint32_t Timeout) -{ - uint32_t tickstart; - - if (hi2c->State == HAL_I2C_STATE_READY) - { - if ((pData == NULL) || (Size == 0U)) - { - hi2c->ErrorCode = HAL_I2C_ERROR_INVALID_PARAM; - return HAL_ERROR; - } - /* Process Locked */ - __HAL_LOCK(hi2c); - - /* Init tickstart for timeout management*/ - tickstart = HAL_GetTick(); - - hi2c->State = HAL_I2C_STATE_BUSY_TX; - hi2c->Mode = HAL_I2C_MODE_SLAVE; - hi2c->ErrorCode = HAL_I2C_ERROR_NONE; - - /* Prepare transfer parameters */ - hi2c->pBuffPtr = pData; - hi2c->XferCount = Size; - hi2c->XferISR = NULL; - - /* Enable Address Acknowledge */ - hi2c->Instance->CR2 &= ~I2C_CR2_NACK; - - /* Wait until ADDR flag is set */ - if (I2C_WaitOnFlagUntilTimeout(hi2c, I2C_FLAG_ADDR, RESET, Timeout, tickstart) != HAL_OK) - { - /* Disable Address Acknowledge */ - hi2c->Instance->CR2 |= I2C_CR2_NACK; - return HAL_ERROR; - } - - /* Clear ADDR flag */ - __HAL_I2C_CLEAR_FLAG(hi2c, I2C_FLAG_ADDR); - - /* If 10bit addressing mode is selected */ - if (hi2c->Init.AddressingMode == I2C_ADDRESSINGMODE_10BIT) - { - /* Wait until ADDR flag is set */ - if (I2C_WaitOnFlagUntilTimeout(hi2c, I2C_FLAG_ADDR, RESET, Timeout, tickstart) != HAL_OK) - { - /* Disable Address Acknowledge */ - hi2c->Instance->CR2 |= I2C_CR2_NACK; - return HAL_ERROR; - } - - /* Clear ADDR flag */ - __HAL_I2C_CLEAR_FLAG(hi2c, I2C_FLAG_ADDR); - } - - /* Wait until DIR flag is set Transmitter mode */ - if (I2C_WaitOnFlagUntilTimeout(hi2c, I2C_FLAG_DIR, RESET, Timeout, tickstart) != HAL_OK) - { - /* Disable Address Acknowledge */ - hi2c->Instance->CR2 |= I2C_CR2_NACK; - return HAL_ERROR; - } - - while (hi2c->XferCount > 0U) - { - /* Wait until TXIS flag is set */ - if (I2C_WaitOnTXISFlagUntilTimeout(hi2c, Timeout, tickstart) != HAL_OK) - { - /* Disable Address Acknowledge */ - hi2c->Instance->CR2 |= I2C_CR2_NACK; - return HAL_ERROR; - } - - /* Write data to TXDR */ - hi2c->Instance->TXDR = *hi2c->pBuffPtr; - - /* Increment Buffer pointer */ - hi2c->pBuffPtr++; - - hi2c->XferCount--; - } - - /* Wait until STOP flag is set */ - if (I2C_WaitOnSTOPFlagUntilTimeout(hi2c, Timeout, tickstart) != HAL_OK) - { - /* Disable Address Acknowledge */ - hi2c->Instance->CR2 |= I2C_CR2_NACK; - - if (hi2c->ErrorCode == HAL_I2C_ERROR_AF) - { - /* Normal use case for Transmitter mode */ - /* A NACK is generated to confirm the end of transfer */ - hi2c->ErrorCode = HAL_I2C_ERROR_NONE; - } - else - { - return HAL_ERROR; - } - } - - /* Clear STOP flag */ - __HAL_I2C_CLEAR_FLAG(hi2c, I2C_FLAG_STOPF); - - /* Wait until BUSY flag is reset */ - if (I2C_WaitOnFlagUntilTimeout(hi2c, I2C_FLAG_BUSY, SET, Timeout, tickstart) != HAL_OK) - { - /* Disable Address Acknowledge */ - hi2c->Instance->CR2 |= I2C_CR2_NACK; - return HAL_ERROR; - } - - /* Disable Address Acknowledge */ - hi2c->Instance->CR2 |= I2C_CR2_NACK; - - hi2c->State = HAL_I2C_STATE_READY; - hi2c->Mode = HAL_I2C_MODE_NONE; - - /* Process Unlocked */ - __HAL_UNLOCK(hi2c); - - return HAL_OK; - } - else - { - return HAL_BUSY; - } -} - -/** - * @brief Receive in slave mode an amount of data in blocking mode - * @param hi2c Pointer to a I2C_HandleTypeDef structure that contains - * the configuration information for the specified I2C. - * @param pData Pointer to data buffer - * @param Size Amount of data to be sent - * @param Timeout Timeout duration - * @retval HAL status - */ -HAL_StatusTypeDef HAL_I2C_Slave_Receive(I2C_HandleTypeDef *hi2c, uint8_t *pData, uint16_t Size, uint32_t Timeout) -{ - uint32_t tickstart; - - if (hi2c->State == HAL_I2C_STATE_READY) - { - if ((pData == NULL) || (Size == 0U)) - { - hi2c->ErrorCode = HAL_I2C_ERROR_INVALID_PARAM; - return HAL_ERROR; - } - /* Process Locked */ - __HAL_LOCK(hi2c); - - /* Init tickstart for timeout management*/ - tickstart = HAL_GetTick(); - - hi2c->State = HAL_I2C_STATE_BUSY_RX; - hi2c->Mode = HAL_I2C_MODE_SLAVE; - hi2c->ErrorCode = HAL_I2C_ERROR_NONE; - - /* Prepare transfer parameters */ - hi2c->pBuffPtr = pData; - hi2c->XferCount = Size; - hi2c->XferISR = NULL; - - /* Enable Address Acknowledge */ - hi2c->Instance->CR2 &= ~I2C_CR2_NACK; - - /* Wait until ADDR flag is set */ - if (I2C_WaitOnFlagUntilTimeout(hi2c, I2C_FLAG_ADDR, RESET, Timeout, tickstart) != HAL_OK) - { - /* Disable Address Acknowledge */ - hi2c->Instance->CR2 |= I2C_CR2_NACK; - return HAL_ERROR; - } - - /* Clear ADDR flag */ - __HAL_I2C_CLEAR_FLAG(hi2c, I2C_FLAG_ADDR); - - /* Wait until DIR flag is reset Receiver mode */ - if (I2C_WaitOnFlagUntilTimeout(hi2c, I2C_FLAG_DIR, SET, Timeout, tickstart) != HAL_OK) - { - /* Disable Address Acknowledge */ - hi2c->Instance->CR2 |= I2C_CR2_NACK; - return HAL_ERROR; - } - - while (hi2c->XferCount > 0U) - { - /* Wait until RXNE flag is set */ - if (I2C_WaitOnRXNEFlagUntilTimeout(hi2c, Timeout, tickstart) != HAL_OK) - { - /* Disable Address Acknowledge */ - hi2c->Instance->CR2 |= I2C_CR2_NACK; - - /* Store Last receive data if any */ - if (__HAL_I2C_GET_FLAG(hi2c, I2C_FLAG_RXNE) == SET) - { - /* Read data from RXDR */ - *hi2c->pBuffPtr = (uint8_t)hi2c->Instance->RXDR; - - /* Increment Buffer pointer */ - hi2c->pBuffPtr++; - - hi2c->XferCount--; - } - - return HAL_ERROR; - } - - /* Read data from RXDR */ - *hi2c->pBuffPtr = (uint8_t)hi2c->Instance->RXDR; - - /* Increment Buffer pointer */ - hi2c->pBuffPtr++; - - hi2c->XferCount--; - } - - /* Wait until STOP flag is set */ - if (I2C_WaitOnSTOPFlagUntilTimeout(hi2c, Timeout, tickstart) != HAL_OK) - { - /* Disable Address Acknowledge */ - hi2c->Instance->CR2 |= I2C_CR2_NACK; - return HAL_ERROR; - } - - /* Clear STOP flag */ - __HAL_I2C_CLEAR_FLAG(hi2c, I2C_FLAG_STOPF); - - /* Wait until BUSY flag is reset */ - if (I2C_WaitOnFlagUntilTimeout(hi2c, I2C_FLAG_BUSY, SET, Timeout, tickstart) != HAL_OK) - { - /* Disable Address Acknowledge */ - hi2c->Instance->CR2 |= I2C_CR2_NACK; - return HAL_ERROR; - } - - /* Disable Address Acknowledge */ - hi2c->Instance->CR2 |= I2C_CR2_NACK; - - hi2c->State = HAL_I2C_STATE_READY; - hi2c->Mode = HAL_I2C_MODE_NONE; - - /* Process Unlocked */ - __HAL_UNLOCK(hi2c); - - return HAL_OK; - } - else - { - return HAL_BUSY; - } -} - -/** - * @brief Transmit in master mode an amount of data in non-blocking mode with Interrupt - * @param hi2c Pointer to a I2C_HandleTypeDef structure that contains - * the configuration information for the specified I2C. - * @param DevAddress Target device address: The device 7 bits address value - * in datasheet must be shifted to the left before calling the interface - * @param pData Pointer to data buffer - * @param Size Amount of data to be sent - * @retval HAL status - */ -HAL_StatusTypeDef HAL_I2C_Master_Transmit_IT(I2C_HandleTypeDef *hi2c, uint16_t DevAddress, uint8_t *pData, uint16_t Size) -{ - uint32_t xfermode; - - if (hi2c->State == HAL_I2C_STATE_READY) - { - if (__HAL_I2C_GET_FLAG(hi2c, I2C_FLAG_BUSY) == SET) - { - return HAL_BUSY; - } - - /* Process Locked */ - __HAL_LOCK(hi2c); - - hi2c->State = HAL_I2C_STATE_BUSY_TX; - hi2c->Mode = HAL_I2C_MODE_MASTER; - hi2c->ErrorCode = HAL_I2C_ERROR_NONE; - - /* Prepare transfer parameters */ - hi2c->pBuffPtr = pData; - hi2c->XferCount = Size; - hi2c->XferOptions = I2C_NO_OPTION_FRAME; - hi2c->XferISR = I2C_Master_ISR_IT; - - if (hi2c->XferCount > MAX_NBYTE_SIZE) - { - hi2c->XferSize = MAX_NBYTE_SIZE; - xfermode = I2C_RELOAD_MODE; - } - else - { - hi2c->XferSize = hi2c->XferCount; - xfermode = I2C_AUTOEND_MODE; - } - - /* Send Slave Address */ - /* Set NBYTES to write and reload if hi2c->XferCount > MAX_NBYTE_SIZE */ - I2C_TransferConfig(hi2c, DevAddress, (uint8_t)hi2c->XferSize, xfermode, I2C_GENERATE_START_WRITE); - - /* Process Unlocked */ - __HAL_UNLOCK(hi2c); - - /* Note : The I2C interrupts must be enabled after unlocking current process - to avoid the risk of I2C interrupt handle execution before current - process unlock */ - - /* Enable ERR, TC, STOP, NACK, TXI interrupt */ - /* possible to enable all of these */ - /* I2C_IT_ERRI | I2C_IT_TCI| I2C_IT_STOPI| I2C_IT_NACKI | I2C_IT_ADDRI | I2C_IT_RXI | I2C_IT_TXI */ - I2C_Enable_IRQ(hi2c, I2C_XFER_TX_IT); - - return HAL_OK; - } - else - { - return HAL_BUSY; - } -} - -/** - * @brief Receive in master mode an amount of data in non-blocking mode with Interrupt - * @param hi2c Pointer to a I2C_HandleTypeDef structure that contains - * the configuration information for the specified I2C. - * @param DevAddress Target device address: The device 7 bits address value - * in datasheet must be shifted to the left before calling the interface - * @param pData Pointer to data buffer - * @param Size Amount of data to be sent - * @retval HAL status - */ -HAL_StatusTypeDef HAL_I2C_Master_Receive_IT(I2C_HandleTypeDef *hi2c, uint16_t DevAddress, uint8_t *pData, uint16_t Size) -{ - uint32_t xfermode; - - if (hi2c->State == HAL_I2C_STATE_READY) - { - if (__HAL_I2C_GET_FLAG(hi2c, I2C_FLAG_BUSY) == SET) - { - return HAL_BUSY; - } - - /* Process Locked */ - __HAL_LOCK(hi2c); - - hi2c->State = HAL_I2C_STATE_BUSY_RX; - hi2c->Mode = HAL_I2C_MODE_MASTER; - hi2c->ErrorCode = HAL_I2C_ERROR_NONE; - - /* Prepare transfer parameters */ - hi2c->pBuffPtr = pData; - hi2c->XferCount = Size; - hi2c->XferOptions = I2C_NO_OPTION_FRAME; - hi2c->XferISR = I2C_Master_ISR_IT; - - if (hi2c->XferCount > MAX_NBYTE_SIZE) - { - hi2c->XferSize = MAX_NBYTE_SIZE; - xfermode = I2C_RELOAD_MODE; - } - else - { - hi2c->XferSize = hi2c->XferCount; - xfermode = I2C_AUTOEND_MODE; - } - - /* Send Slave Address */ - /* Set NBYTES to write and reload if hi2c->XferCount > MAX_NBYTE_SIZE */ - I2C_TransferConfig(hi2c, DevAddress, (uint8_t)hi2c->XferSize, xfermode, I2C_GENERATE_START_READ); - - /* Process Unlocked */ - __HAL_UNLOCK(hi2c); - - /* Note : The I2C interrupts must be enabled after unlocking current process - to avoid the risk of I2C interrupt handle execution before current - process unlock */ - - /* Enable ERR, TC, STOP, NACK, RXI interrupt */ - /* possible to enable all of these */ - /* I2C_IT_ERRI | I2C_IT_TCI| I2C_IT_STOPI| I2C_IT_NACKI | I2C_IT_ADDRI | I2C_IT_RXI | I2C_IT_TXI */ - I2C_Enable_IRQ(hi2c, I2C_XFER_RX_IT); - - return HAL_OK; - } - else - { - return HAL_BUSY; - } -} - -/** - * @brief Transmit in slave mode an amount of data in non-blocking mode with Interrupt - * @param hi2c Pointer to a I2C_HandleTypeDef structure that contains - * the configuration information for the specified I2C. - * @param pData Pointer to data buffer - * @param Size Amount of data to be sent - * @retval HAL status - */ -HAL_StatusTypeDef HAL_I2C_Slave_Transmit_IT(I2C_HandleTypeDef *hi2c, uint8_t *pData, uint16_t Size) -{ - if (hi2c->State == HAL_I2C_STATE_READY) - { - /* Process Locked */ - __HAL_LOCK(hi2c); - - hi2c->State = HAL_I2C_STATE_BUSY_TX; - hi2c->Mode = HAL_I2C_MODE_SLAVE; - hi2c->ErrorCode = HAL_I2C_ERROR_NONE; - - /* Enable Address Acknowledge */ - hi2c->Instance->CR2 &= ~I2C_CR2_NACK; - - /* Prepare transfer parameters */ - hi2c->pBuffPtr = pData; - hi2c->XferCount = Size; - hi2c->XferSize = hi2c->XferCount; - hi2c->XferOptions = I2C_NO_OPTION_FRAME; - hi2c->XferISR = I2C_Slave_ISR_IT; - - /* Process Unlocked */ - __HAL_UNLOCK(hi2c); - - /* Note : The I2C interrupts must be enabled after unlocking current process - to avoid the risk of I2C interrupt handle execution before current - process unlock */ - - /* Enable ERR, TC, STOP, NACK, TXI interrupt */ - /* possible to enable all of these */ - /* I2C_IT_ERRI | I2C_IT_TCI| I2C_IT_STOPI| I2C_IT_NACKI | I2C_IT_ADDRI | I2C_IT_RXI | I2C_IT_TXI */ - I2C_Enable_IRQ(hi2c, I2C_XFER_TX_IT | I2C_XFER_LISTEN_IT); - - return HAL_OK; - } - else - { - return HAL_BUSY; - } -} - -/** - * @brief Receive in slave mode an amount of data in non-blocking mode with Interrupt - * @param hi2c Pointer to a I2C_HandleTypeDef structure that contains - * the configuration information for the specified I2C. - * @param pData Pointer to data buffer - * @param Size Amount of data to be sent - * @retval HAL status - */ -HAL_StatusTypeDef HAL_I2C_Slave_Receive_IT(I2C_HandleTypeDef *hi2c, uint8_t *pData, uint16_t Size) -{ - if (hi2c->State == HAL_I2C_STATE_READY) - { - /* Process Locked */ - __HAL_LOCK(hi2c); - - hi2c->State = HAL_I2C_STATE_BUSY_RX; - hi2c->Mode = HAL_I2C_MODE_SLAVE; - hi2c->ErrorCode = HAL_I2C_ERROR_NONE; - - /* Enable Address Acknowledge */ - hi2c->Instance->CR2 &= ~I2C_CR2_NACK; - - /* Prepare transfer parameters */ - hi2c->pBuffPtr = pData; - hi2c->XferCount = Size; - hi2c->XferSize = hi2c->XferCount; - hi2c->XferOptions = I2C_NO_OPTION_FRAME; - hi2c->XferISR = I2C_Slave_ISR_IT; - - /* Process Unlocked */ - __HAL_UNLOCK(hi2c); - - /* Note : The I2C interrupts must be enabled after unlocking current process - to avoid the risk of I2C interrupt handle execution before current - process unlock */ - - /* Enable ERR, TC, STOP, NACK, RXI interrupt */ - /* possible to enable all of these */ - /* I2C_IT_ERRI | I2C_IT_TCI| I2C_IT_STOPI| I2C_IT_NACKI | I2C_IT_ADDRI | I2C_IT_RXI | I2C_IT_TXI */ - I2C_Enable_IRQ(hi2c, I2C_XFER_RX_IT | I2C_XFER_LISTEN_IT); - - return HAL_OK; - } - else - { - return HAL_BUSY; - } -} - -/** - * @brief Transmit in master mode an amount of data in non-blocking mode with DMA - * @param hi2c Pointer to a I2C_HandleTypeDef structure that contains - * the configuration information for the specified I2C. - * @param DevAddress Target device address: The device 7 bits address value - * in datasheet must be shifted to the left before calling the interface - * @param pData Pointer to data buffer - * @param Size Amount of data to be sent - * @retval HAL status - */ -HAL_StatusTypeDef HAL_I2C_Master_Transmit_DMA(I2C_HandleTypeDef *hi2c, uint16_t DevAddress, uint8_t *pData, uint16_t Size) -{ - uint32_t xfermode; - HAL_StatusTypeDef dmaxferstatus; - - if (hi2c->State == HAL_I2C_STATE_READY) - { - if (__HAL_I2C_GET_FLAG(hi2c, I2C_FLAG_BUSY) == SET) - { - return HAL_BUSY; - } - - /* Process Locked */ - __HAL_LOCK(hi2c); - - hi2c->State = HAL_I2C_STATE_BUSY_TX; - hi2c->Mode = HAL_I2C_MODE_MASTER; - hi2c->ErrorCode = HAL_I2C_ERROR_NONE; - - /* Prepare transfer parameters */ - hi2c->pBuffPtr = pData; - hi2c->XferCount = Size; - hi2c->XferOptions = I2C_NO_OPTION_FRAME; - hi2c->XferISR = I2C_Master_ISR_DMA; - - if (hi2c->XferCount > MAX_NBYTE_SIZE) - { - hi2c->XferSize = MAX_NBYTE_SIZE; - xfermode = I2C_RELOAD_MODE; - } - else - { - hi2c->XferSize = hi2c->XferCount; - xfermode = I2C_AUTOEND_MODE; - } - - if (hi2c->XferSize > 0U) - { - if (hi2c->hdmatx != NULL) - { - /* Set the I2C DMA transfer complete callback */ - hi2c->hdmatx->XferCpltCallback = I2C_DMAMasterTransmitCplt; - - /* Set the DMA error callback */ - hi2c->hdmatx->XferErrorCallback = I2C_DMAError; - - /* Set the unused DMA callbacks to NULL */ - hi2c->hdmatx->XferHalfCpltCallback = NULL; - hi2c->hdmatx->XferAbortCallback = NULL; - - /* Enable the DMA stream */ - dmaxferstatus = HAL_DMA_Start_IT(hi2c->hdmatx, (uint32_t)pData, (uint32_t)&hi2c->Instance->TXDR, hi2c->XferSize); - } - else - { - /* Update I2C state */ - hi2c->State = HAL_I2C_STATE_READY; - hi2c->Mode = HAL_I2C_MODE_NONE; - - /* Update I2C error code */ - hi2c->ErrorCode |= HAL_I2C_ERROR_DMA_PARAM; - - /* Process Unlocked */ - __HAL_UNLOCK(hi2c); - - return HAL_ERROR; - } - - if (dmaxferstatus == HAL_OK) - { - /* Send Slave Address */ - /* Set NBYTES to write and reload if hi2c->XferCount > MAX_NBYTE_SIZE and generate RESTART */ - I2C_TransferConfig(hi2c, DevAddress, (uint8_t)hi2c->XferSize, xfermode, I2C_GENERATE_START_WRITE); - - /* Update XferCount value */ - hi2c->XferCount -= hi2c->XferSize; - - /* Process Unlocked */ - __HAL_UNLOCK(hi2c); - - /* Note : The I2C interrupts must be enabled after unlocking current process - to avoid the risk of I2C interrupt handle execution before current - process unlock */ - /* Enable ERR and NACK interrupts */ - I2C_Enable_IRQ(hi2c, I2C_XFER_ERROR_IT); - - /* Enable DMA Request */ - hi2c->Instance->CR1 |= I2C_CR1_TXDMAEN; - } - else - { - /* Update I2C state */ - hi2c->State = HAL_I2C_STATE_READY; - hi2c->Mode = HAL_I2C_MODE_NONE; - - /* Update I2C error code */ - hi2c->ErrorCode |= HAL_I2C_ERROR_DMA; - - /* Process Unlocked */ - __HAL_UNLOCK(hi2c); - - return HAL_ERROR; - } - } - else - { - /* Update Transfer ISR function pointer */ - hi2c->XferISR = I2C_Master_ISR_IT; - - /* Send Slave Address */ - /* Set NBYTES to write and generate START condition */ - I2C_TransferConfig(hi2c, DevAddress, (uint8_t)hi2c->XferSize, I2C_AUTOEND_MODE, I2C_GENERATE_START_WRITE); - - /* Process Unlocked */ - __HAL_UNLOCK(hi2c); - - /* Note : The I2C interrupts must be enabled after unlocking current process - to avoid the risk of I2C interrupt handle execution before current - process unlock */ - /* Enable ERR, TC, STOP, NACK, TXI interrupt */ - /* possible to enable all of these */ - /* I2C_IT_ERRI | I2C_IT_TCI| I2C_IT_STOPI| I2C_IT_NACKI | I2C_IT_ADDRI | I2C_IT_RXI | I2C_IT_TXI */ - I2C_Enable_IRQ(hi2c, I2C_XFER_TX_IT); - } - - return HAL_OK; - } - else - { - return HAL_BUSY; - } -} - -/** - * @brief Receive in master mode an amount of data in non-blocking mode with DMA - * @param hi2c Pointer to a I2C_HandleTypeDef structure that contains - * the configuration information for the specified I2C. - * @param DevAddress Target device address: The device 7 bits address value - * in datasheet must be shifted to the left before calling the interface - * @param pData Pointer to data buffer - * @param Size Amount of data to be sent - * @retval HAL status - */ -HAL_StatusTypeDef HAL_I2C_Master_Receive_DMA(I2C_HandleTypeDef *hi2c, uint16_t DevAddress, uint8_t *pData, uint16_t Size) -{ - uint32_t xfermode; - HAL_StatusTypeDef dmaxferstatus; - - if (hi2c->State == HAL_I2C_STATE_READY) - { - if (__HAL_I2C_GET_FLAG(hi2c, I2C_FLAG_BUSY) == SET) - { - return HAL_BUSY; - } - - /* Process Locked */ - __HAL_LOCK(hi2c); - - hi2c->State = HAL_I2C_STATE_BUSY_RX; - hi2c->Mode = HAL_I2C_MODE_MASTER; - hi2c->ErrorCode = HAL_I2C_ERROR_NONE; - - /* Prepare transfer parameters */ - hi2c->pBuffPtr = pData; - hi2c->XferCount = Size; - hi2c->XferOptions = I2C_NO_OPTION_FRAME; - hi2c->XferISR = I2C_Master_ISR_DMA; - - if (hi2c->XferCount > MAX_NBYTE_SIZE) - { - hi2c->XferSize = MAX_NBYTE_SIZE; - xfermode = I2C_RELOAD_MODE; - } - else - { - hi2c->XferSize = hi2c->XferCount; - xfermode = I2C_AUTOEND_MODE; - } - - if (hi2c->XferSize > 0U) - { - if (hi2c->hdmarx != NULL) - { - /* Set the I2C DMA transfer complete callback */ - hi2c->hdmarx->XferCpltCallback = I2C_DMAMasterReceiveCplt; - - /* Set the DMA error callback */ - hi2c->hdmarx->XferErrorCallback = I2C_DMAError; - - /* Set the unused DMA callbacks to NULL */ - hi2c->hdmarx->XferHalfCpltCallback = NULL; - hi2c->hdmarx->XferAbortCallback = NULL; - - /* Enable the DMA stream */ - dmaxferstatus = HAL_DMA_Start_IT(hi2c->hdmarx, (uint32_t)&hi2c->Instance->RXDR, (uint32_t)pData, hi2c->XferSize); - } - else - { - /* Update I2C state */ - hi2c->State = HAL_I2C_STATE_READY; - hi2c->Mode = HAL_I2C_MODE_NONE; - - /* Update I2C error code */ - hi2c->ErrorCode |= HAL_I2C_ERROR_DMA_PARAM; - - /* Process Unlocked */ - __HAL_UNLOCK(hi2c); - - return HAL_ERROR; - } - - if (dmaxferstatus == HAL_OK) - { - /* Send Slave Address */ - /* Set NBYTES to read and reload if hi2c->XferCount > MAX_NBYTE_SIZE and generate RESTART */ - I2C_TransferConfig(hi2c, DevAddress, (uint8_t)hi2c->XferSize, xfermode, I2C_GENERATE_START_READ); - - /* Update XferCount value */ - hi2c->XferCount -= hi2c->XferSize; - - /* Process Unlocked */ - __HAL_UNLOCK(hi2c); - - /* Note : The I2C interrupts must be enabled after unlocking current process - to avoid the risk of I2C interrupt handle execution before current - process unlock */ - /* Enable ERR and NACK interrupts */ - I2C_Enable_IRQ(hi2c, I2C_XFER_ERROR_IT); - - /* Enable DMA Request */ - hi2c->Instance->CR1 |= I2C_CR1_RXDMAEN; - } - else - { - /* Update I2C state */ - hi2c->State = HAL_I2C_STATE_READY; - hi2c->Mode = HAL_I2C_MODE_NONE; - - /* Update I2C error code */ - hi2c->ErrorCode |= HAL_I2C_ERROR_DMA; - - /* Process Unlocked */ - __HAL_UNLOCK(hi2c); - - return HAL_ERROR; - } - } - else - { - /* Update Transfer ISR function pointer */ - hi2c->XferISR = I2C_Master_ISR_IT; - - /* Send Slave Address */ - /* Set NBYTES to read and generate START condition */ - I2C_TransferConfig(hi2c, DevAddress, (uint8_t)hi2c->XferSize, I2C_AUTOEND_MODE, I2C_GENERATE_START_READ); - - /* Process Unlocked */ - __HAL_UNLOCK(hi2c); - - /* Note : The I2C interrupts must be enabled after unlocking current process - to avoid the risk of I2C interrupt handle execution before current - process unlock */ - /* Enable ERR, TC, STOP, NACK, TXI interrupt */ - /* possible to enable all of these */ - /* I2C_IT_ERRI | I2C_IT_TCI| I2C_IT_STOPI| I2C_IT_NACKI | I2C_IT_ADDRI | I2C_IT_RXI | I2C_IT_TXI */ - I2C_Enable_IRQ(hi2c, I2C_XFER_TX_IT); - } - - return HAL_OK; - } - else - { - return HAL_BUSY; - } -} - -/** - * @brief Transmit in slave mode an amount of data in non-blocking mode with DMA - * @param hi2c Pointer to a I2C_HandleTypeDef structure that contains - * the configuration information for the specified I2C. - * @param pData Pointer to data buffer - * @param Size Amount of data to be sent - * @retval HAL status - */ -HAL_StatusTypeDef HAL_I2C_Slave_Transmit_DMA(I2C_HandleTypeDef *hi2c, uint8_t *pData, uint16_t Size) -{ - HAL_StatusTypeDef dmaxferstatus; - - if (hi2c->State == HAL_I2C_STATE_READY) - { - if ((pData == NULL) || (Size == 0U)) - { - hi2c->ErrorCode = HAL_I2C_ERROR_INVALID_PARAM; - return HAL_ERROR; - } - /* Process Locked */ - __HAL_LOCK(hi2c); - - hi2c->State = HAL_I2C_STATE_BUSY_TX; - hi2c->Mode = HAL_I2C_MODE_SLAVE; - hi2c->ErrorCode = HAL_I2C_ERROR_NONE; - - /* Prepare transfer parameters */ - hi2c->pBuffPtr = pData; - hi2c->XferCount = Size; - hi2c->XferSize = hi2c->XferCount; - hi2c->XferOptions = I2C_NO_OPTION_FRAME; - hi2c->XferISR = I2C_Slave_ISR_DMA; - - if (hi2c->hdmatx != NULL) - { - /* Set the I2C DMA transfer complete callback */ - hi2c->hdmatx->XferCpltCallback = I2C_DMASlaveTransmitCplt; - - /* Set the DMA error callback */ - hi2c->hdmatx->XferErrorCallback = I2C_DMAError; - - /* Set the unused DMA callbacks to NULL */ - hi2c->hdmatx->XferHalfCpltCallback = NULL; - hi2c->hdmatx->XferAbortCallback = NULL; - - /* Enable the DMA stream */ - dmaxferstatus = HAL_DMA_Start_IT(hi2c->hdmatx, (uint32_t)pData, (uint32_t)&hi2c->Instance->TXDR, hi2c->XferSize); - } - else - { - /* Update I2C state */ - hi2c->State = HAL_I2C_STATE_LISTEN; - hi2c->Mode = HAL_I2C_MODE_NONE; - - /* Update I2C error code */ - hi2c->ErrorCode |= HAL_I2C_ERROR_DMA_PARAM; - - /* Process Unlocked */ - __HAL_UNLOCK(hi2c); - - return HAL_ERROR; - } - - if (dmaxferstatus == HAL_OK) - { - /* Enable Address Acknowledge */ - hi2c->Instance->CR2 &= ~I2C_CR2_NACK; - - /* Process Unlocked */ - __HAL_UNLOCK(hi2c); - - /* Note : The I2C interrupts must be enabled after unlocking current process - to avoid the risk of I2C interrupt handle execution before current - process unlock */ - /* Enable ERR, STOP, NACK, ADDR interrupts */ - I2C_Enable_IRQ(hi2c, I2C_XFER_LISTEN_IT); - - /* Enable DMA Request */ - hi2c->Instance->CR1 |= I2C_CR1_TXDMAEN; - } - else - { - /* Update I2C state */ - hi2c->State = HAL_I2C_STATE_LISTEN; - hi2c->Mode = HAL_I2C_MODE_NONE; - - /* Update I2C error code */ - hi2c->ErrorCode |= HAL_I2C_ERROR_DMA; - - /* Process Unlocked */ - __HAL_UNLOCK(hi2c); - - return HAL_ERROR; - } - - return HAL_OK; - } - else - { - return HAL_BUSY; - } -} - -/** - * @brief Receive in slave mode an amount of data in non-blocking mode with DMA - * @param hi2c Pointer to a I2C_HandleTypeDef structure that contains - * the configuration information for the specified I2C. - * @param pData Pointer to data buffer - * @param Size Amount of data to be sent - * @retval HAL status - */ -HAL_StatusTypeDef HAL_I2C_Slave_Receive_DMA(I2C_HandleTypeDef *hi2c, uint8_t *pData, uint16_t Size) -{ - HAL_StatusTypeDef dmaxferstatus; - - if (hi2c->State == HAL_I2C_STATE_READY) - { - if ((pData == NULL) || (Size == 0U)) - { - hi2c->ErrorCode = HAL_I2C_ERROR_INVALID_PARAM; - return HAL_ERROR; - } - /* Process Locked */ - __HAL_LOCK(hi2c); - - hi2c->State = HAL_I2C_STATE_BUSY_RX; - hi2c->Mode = HAL_I2C_MODE_SLAVE; - hi2c->ErrorCode = HAL_I2C_ERROR_NONE; - - /* Prepare transfer parameters */ - hi2c->pBuffPtr = pData; - hi2c->XferCount = Size; - hi2c->XferSize = hi2c->XferCount; - hi2c->XferOptions = I2C_NO_OPTION_FRAME; - hi2c->XferISR = I2C_Slave_ISR_DMA; - - if (hi2c->hdmarx != NULL) - { - /* Set the I2C DMA transfer complete callback */ - hi2c->hdmarx->XferCpltCallback = I2C_DMASlaveReceiveCplt; - - /* Set the DMA error callback */ - hi2c->hdmarx->XferErrorCallback = I2C_DMAError; - - /* Set the unused DMA callbacks to NULL */ - hi2c->hdmarx->XferHalfCpltCallback = NULL; - hi2c->hdmarx->XferAbortCallback = NULL; - - /* Enable the DMA stream */ - dmaxferstatus = HAL_DMA_Start_IT(hi2c->hdmarx, (uint32_t)&hi2c->Instance->RXDR, (uint32_t)pData, hi2c->XferSize); - } - else - { - /* Update I2C state */ - hi2c->State = HAL_I2C_STATE_LISTEN; - hi2c->Mode = HAL_I2C_MODE_NONE; - - /* Update I2C error code */ - hi2c->ErrorCode |= HAL_I2C_ERROR_DMA_PARAM; - - /* Process Unlocked */ - __HAL_UNLOCK(hi2c); - - return HAL_ERROR; - } - - if (dmaxferstatus == HAL_OK) - { - /* Enable Address Acknowledge */ - hi2c->Instance->CR2 &= ~I2C_CR2_NACK; - - /* Process Unlocked */ - __HAL_UNLOCK(hi2c); - - /* Note : The I2C interrupts must be enabled after unlocking current process - to avoid the risk of I2C interrupt handle execution before current - process unlock */ - /* Enable ERR, STOP, NACK, ADDR interrupts */ - I2C_Enable_IRQ(hi2c, I2C_XFER_LISTEN_IT); - - /* Enable DMA Request */ - hi2c->Instance->CR1 |= I2C_CR1_RXDMAEN; - } - else - { - /* Update I2C state */ - hi2c->State = HAL_I2C_STATE_LISTEN; - hi2c->Mode = HAL_I2C_MODE_NONE; - - /* Update I2C error code */ - hi2c->ErrorCode |= HAL_I2C_ERROR_DMA; - - /* Process Unlocked */ - __HAL_UNLOCK(hi2c); - - return HAL_ERROR; - } - - return HAL_OK; - } - else - { - return HAL_BUSY; - } -} -/** - * @brief Write an amount of data in blocking mode to a specific memory address - * @param hi2c Pointer to a I2C_HandleTypeDef structure that contains - * the configuration information for the specified I2C. - * @param DevAddress Target device address: The device 7 bits address value - * in datasheet must be shifted to the left before calling the interface - * @param MemAddress Internal memory address - * @param MemAddSize Size of internal memory address - * @param pData Pointer to data buffer - * @param Size Amount of data to be sent - * @param Timeout Timeout duration - * @retval HAL status - */ -HAL_StatusTypeDef HAL_I2C_Mem_Write(I2C_HandleTypeDef *hi2c, uint16_t DevAddress, uint16_t MemAddress, uint16_t MemAddSize, uint8_t *pData, uint16_t Size, uint32_t Timeout) -{ - uint32_t tickstart; - - /* Check the parameters */ - assert_param(IS_I2C_MEMADD_SIZE(MemAddSize)); - - if (hi2c->State == HAL_I2C_STATE_READY) - { - if ((pData == NULL) || (Size == 0U)) - { - hi2c->ErrorCode = HAL_I2C_ERROR_INVALID_PARAM; - return HAL_ERROR; - } - - /* Process Locked */ - __HAL_LOCK(hi2c); - - /* Init tickstart for timeout management*/ - tickstart = HAL_GetTick(); - - if (I2C_WaitOnFlagUntilTimeout(hi2c, I2C_FLAG_BUSY, SET, I2C_TIMEOUT_BUSY, tickstart) != HAL_OK) - { - return HAL_ERROR; - } - - hi2c->State = HAL_I2C_STATE_BUSY_TX; - hi2c->Mode = HAL_I2C_MODE_MEM; - hi2c->ErrorCode = HAL_I2C_ERROR_NONE; - - /* Prepare transfer parameters */ - hi2c->pBuffPtr = pData; - hi2c->XferCount = Size; - hi2c->XferISR = NULL; - - /* Send Slave Address and Memory Address */ - if (I2C_RequestMemoryWrite(hi2c, DevAddress, MemAddress, MemAddSize, Timeout, tickstart) != HAL_OK) - { - /* Process Unlocked */ - __HAL_UNLOCK(hi2c); - return HAL_ERROR; - } - - /* Set NBYTES to write and reload if hi2c->XferCount > MAX_NBYTE_SIZE */ - if (hi2c->XferCount > MAX_NBYTE_SIZE) - { - hi2c->XferSize = MAX_NBYTE_SIZE; - I2C_TransferConfig(hi2c, DevAddress, (uint8_t)hi2c->XferSize, I2C_RELOAD_MODE, I2C_NO_STARTSTOP); - } - else - { - hi2c->XferSize = hi2c->XferCount; - I2C_TransferConfig(hi2c, DevAddress, (uint8_t)hi2c->XferSize, I2C_AUTOEND_MODE, I2C_NO_STARTSTOP); - } - - do - { - /* Wait until TXIS flag is set */ - if (I2C_WaitOnTXISFlagUntilTimeout(hi2c, Timeout, tickstart) != HAL_OK) - { - return HAL_ERROR; - } - - /* Write data to TXDR */ - hi2c->Instance->TXDR = *hi2c->pBuffPtr; - - /* Increment Buffer pointer */ - hi2c->pBuffPtr++; - - hi2c->XferCount--; - hi2c->XferSize--; - - if ((hi2c->XferCount != 0U) && (hi2c->XferSize == 0U)) - { - /* Wait until TCR flag is set */ - if (I2C_WaitOnFlagUntilTimeout(hi2c, I2C_FLAG_TCR, RESET, Timeout, tickstart) != HAL_OK) - { - return HAL_ERROR; - } - - if (hi2c->XferCount > MAX_NBYTE_SIZE) - { - hi2c->XferSize = MAX_NBYTE_SIZE; - I2C_TransferConfig(hi2c, DevAddress, (uint8_t)hi2c->XferSize, I2C_RELOAD_MODE, I2C_NO_STARTSTOP); - } - else - { - hi2c->XferSize = hi2c->XferCount; - I2C_TransferConfig(hi2c, DevAddress, (uint8_t)hi2c->XferSize, I2C_AUTOEND_MODE, I2C_NO_STARTSTOP); - } - } - - } - while (hi2c->XferCount > 0U); - - /* No need to Check TC flag, with AUTOEND mode the stop is automatically generated */ - /* Wait until STOPF flag is reset */ - if (I2C_WaitOnSTOPFlagUntilTimeout(hi2c, Timeout, tickstart) != HAL_OK) - { - return HAL_ERROR; - } - - /* Clear STOP Flag */ - __HAL_I2C_CLEAR_FLAG(hi2c, I2C_FLAG_STOPF); - - /* Clear Configuration Register 2 */ - I2C_RESET_CR2(hi2c); - - hi2c->State = HAL_I2C_STATE_READY; - hi2c->Mode = HAL_I2C_MODE_NONE; - - /* Process Unlocked */ - __HAL_UNLOCK(hi2c); - - return HAL_OK; - } - else - { - return HAL_BUSY; - } -} - -/** - * @brief Read an amount of data in blocking mode from a specific memory address - * @param hi2c Pointer to a I2C_HandleTypeDef structure that contains - * the configuration information for the specified I2C. - * @param DevAddress Target device address: The device 7 bits address value - * in datasheet must be shifted to the left before calling the interface - * @param MemAddress Internal memory address - * @param MemAddSize Size of internal memory address - * @param pData Pointer to data buffer - * @param Size Amount of data to be sent - * @param Timeout Timeout duration - * @retval HAL status - */ -HAL_StatusTypeDef HAL_I2C_Mem_Read(I2C_HandleTypeDef *hi2c, uint16_t DevAddress, uint16_t MemAddress, uint16_t MemAddSize, uint8_t *pData, uint16_t Size, uint32_t Timeout) -{ - uint32_t tickstart; - - /* Check the parameters */ - assert_param(IS_I2C_MEMADD_SIZE(MemAddSize)); - - if (hi2c->State == HAL_I2C_STATE_READY) - { - if ((pData == NULL) || (Size == 0U)) - { - hi2c->ErrorCode = HAL_I2C_ERROR_INVALID_PARAM; - return HAL_ERROR; - } - - /* Process Locked */ - __HAL_LOCK(hi2c); - - /* Init tickstart for timeout management*/ - tickstart = HAL_GetTick(); - - if (I2C_WaitOnFlagUntilTimeout(hi2c, I2C_FLAG_BUSY, SET, I2C_TIMEOUT_BUSY, tickstart) != HAL_OK) - { - return HAL_ERROR; - } - - hi2c->State = HAL_I2C_STATE_BUSY_RX; - hi2c->Mode = HAL_I2C_MODE_MEM; - hi2c->ErrorCode = HAL_I2C_ERROR_NONE; - - /* Prepare transfer parameters */ - hi2c->pBuffPtr = pData; - hi2c->XferCount = Size; - hi2c->XferISR = NULL; - - /* Send Slave Address and Memory Address */ - if (I2C_RequestMemoryRead(hi2c, DevAddress, MemAddress, MemAddSize, Timeout, tickstart) != HAL_OK) - { - /* Process Unlocked */ - __HAL_UNLOCK(hi2c); - return HAL_ERROR; - } - - /* Send Slave Address */ - /* Set NBYTES to write and reload if hi2c->XferCount > MAX_NBYTE_SIZE and generate RESTART */ - if (hi2c->XferCount > MAX_NBYTE_SIZE) - { - hi2c->XferSize = MAX_NBYTE_SIZE; - I2C_TransferConfig(hi2c, DevAddress, (uint8_t)hi2c->XferSize, I2C_RELOAD_MODE, I2C_GENERATE_START_READ); - } - else - { - hi2c->XferSize = hi2c->XferCount; - I2C_TransferConfig(hi2c, DevAddress, (uint8_t)hi2c->XferSize, I2C_AUTOEND_MODE, I2C_GENERATE_START_READ); - } - - do - { - /* Wait until RXNE flag is set */ - if (I2C_WaitOnFlagUntilTimeout(hi2c, I2C_FLAG_RXNE, RESET, Timeout, tickstart) != HAL_OK) - { - return HAL_ERROR; - } - - /* Read data from RXDR */ - *hi2c->pBuffPtr = (uint8_t)hi2c->Instance->RXDR; - - /* Increment Buffer pointer */ - hi2c->pBuffPtr++; - - hi2c->XferSize--; - hi2c->XferCount--; - - if ((hi2c->XferCount != 0U) && (hi2c->XferSize == 0U)) - { - /* Wait until TCR flag is set */ - if (I2C_WaitOnFlagUntilTimeout(hi2c, I2C_FLAG_TCR, RESET, Timeout, tickstart) != HAL_OK) - { - return HAL_ERROR; - } - - if (hi2c->XferCount > MAX_NBYTE_SIZE) - { - hi2c->XferSize = MAX_NBYTE_SIZE; - I2C_TransferConfig(hi2c, DevAddress, (uint8_t) hi2c->XferSize, I2C_RELOAD_MODE, I2C_NO_STARTSTOP); - } - else - { - hi2c->XferSize = hi2c->XferCount; - I2C_TransferConfig(hi2c, DevAddress, (uint8_t)hi2c->XferSize, I2C_AUTOEND_MODE, I2C_NO_STARTSTOP); - } - } - } - while (hi2c->XferCount > 0U); - - /* No need to Check TC flag, with AUTOEND mode the stop is automatically generated */ - /* Wait until STOPF flag is reset */ - if (I2C_WaitOnSTOPFlagUntilTimeout(hi2c, Timeout, tickstart) != HAL_OK) - { - return HAL_ERROR; - } - - /* Clear STOP Flag */ - __HAL_I2C_CLEAR_FLAG(hi2c, I2C_FLAG_STOPF); - - /* Clear Configuration Register 2 */ - I2C_RESET_CR2(hi2c); - - hi2c->State = HAL_I2C_STATE_READY; - hi2c->Mode = HAL_I2C_MODE_NONE; - - /* Process Unlocked */ - __HAL_UNLOCK(hi2c); - - return HAL_OK; - } - else - { - return HAL_BUSY; - } -} -/** - * @brief Write an amount of data in non-blocking mode with Interrupt to a specific memory address - * @param hi2c Pointer to a I2C_HandleTypeDef structure that contains - * the configuration information for the specified I2C. - * @param DevAddress Target device address: The device 7 bits address value - * in datasheet must be shifted to the left before calling the interface - * @param MemAddress Internal memory address - * @param MemAddSize Size of internal memory address - * @param pData Pointer to data buffer - * @param Size Amount of data to be sent - * @retval HAL status - */ -HAL_StatusTypeDef HAL_I2C_Mem_Write_IT(I2C_HandleTypeDef *hi2c, uint16_t DevAddress, uint16_t MemAddress, uint16_t MemAddSize, uint8_t *pData, uint16_t Size) -{ - uint32_t tickstart; - uint32_t xfermode; - - /* Check the parameters */ - assert_param(IS_I2C_MEMADD_SIZE(MemAddSize)); - - if (hi2c->State == HAL_I2C_STATE_READY) - { - if ((pData == NULL) || (Size == 0U)) - { - hi2c->ErrorCode = HAL_I2C_ERROR_INVALID_PARAM; - return HAL_ERROR; - } - - if (__HAL_I2C_GET_FLAG(hi2c, I2C_FLAG_BUSY) == SET) - { - return HAL_BUSY; - } - - /* Process Locked */ - __HAL_LOCK(hi2c); - - /* Init tickstart for timeout management*/ - tickstart = HAL_GetTick(); - - hi2c->State = HAL_I2C_STATE_BUSY_TX; - hi2c->Mode = HAL_I2C_MODE_MEM; - hi2c->ErrorCode = HAL_I2C_ERROR_NONE; - - /* Prepare transfer parameters */ - hi2c->pBuffPtr = pData; - hi2c->XferCount = Size; - hi2c->XferOptions = I2C_NO_OPTION_FRAME; - hi2c->XferISR = I2C_Master_ISR_IT; - - if (hi2c->XferCount > MAX_NBYTE_SIZE) - { - hi2c->XferSize = MAX_NBYTE_SIZE; - xfermode = I2C_RELOAD_MODE; - } - else - { - hi2c->XferSize = hi2c->XferCount; - xfermode = I2C_AUTOEND_MODE; - } - - /* Send Slave Address and Memory Address */ - if (I2C_RequestMemoryWrite(hi2c, DevAddress, MemAddress, MemAddSize, I2C_TIMEOUT_FLAG, tickstart) != HAL_OK) - { - /* Process Unlocked */ - __HAL_UNLOCK(hi2c); - return HAL_ERROR; - } - - /* Set NBYTES to write and reload if hi2c->XferCount > MAX_NBYTE_SIZE and generate RESTART */ - I2C_TransferConfig(hi2c, DevAddress, (uint8_t)hi2c->XferSize, xfermode, I2C_NO_STARTSTOP); - - /* Process Unlocked */ - __HAL_UNLOCK(hi2c); - - /* Note : The I2C interrupts must be enabled after unlocking current process - to avoid the risk of I2C interrupt handle execution before current - process unlock */ - - /* Enable ERR, TC, STOP, NACK, TXI interrupt */ - /* possible to enable all of these */ - /* I2C_IT_ERRI | I2C_IT_TCI| I2C_IT_STOPI| I2C_IT_NACKI | I2C_IT_ADDRI | I2C_IT_RXI | I2C_IT_TXI */ - I2C_Enable_IRQ(hi2c, I2C_XFER_TX_IT); - - return HAL_OK; - } - else - { - return HAL_BUSY; - } -} - -/** - * @brief Read an amount of data in non-blocking mode with Interrupt from a specific memory address - * @param hi2c Pointer to a I2C_HandleTypeDef structure that contains - * the configuration information for the specified I2C. - * @param DevAddress Target device address: The device 7 bits address value - * in datasheet must be shifted to the left before calling the interface - * @param MemAddress Internal memory address - * @param MemAddSize Size of internal memory address - * @param pData Pointer to data buffer - * @param Size Amount of data to be sent - * @retval HAL status - */ -HAL_StatusTypeDef HAL_I2C_Mem_Read_IT(I2C_HandleTypeDef *hi2c, uint16_t DevAddress, uint16_t MemAddress, uint16_t MemAddSize, uint8_t *pData, uint16_t Size) -{ - uint32_t tickstart; - uint32_t xfermode; - - /* Check the parameters */ - assert_param(IS_I2C_MEMADD_SIZE(MemAddSize)); - - if (hi2c->State == HAL_I2C_STATE_READY) - { - if ((pData == NULL) || (Size == 0U)) - { - hi2c->ErrorCode = HAL_I2C_ERROR_INVALID_PARAM; - return HAL_ERROR; - } - - if (__HAL_I2C_GET_FLAG(hi2c, I2C_FLAG_BUSY) == SET) - { - return HAL_BUSY; - } - - /* Process Locked */ - __HAL_LOCK(hi2c); - - /* Init tickstart for timeout management*/ - tickstart = HAL_GetTick(); - - hi2c->State = HAL_I2C_STATE_BUSY_RX; - hi2c->Mode = HAL_I2C_MODE_MEM; - hi2c->ErrorCode = HAL_I2C_ERROR_NONE; - - /* Prepare transfer parameters */ - hi2c->pBuffPtr = pData; - hi2c->XferCount = Size; - hi2c->XferOptions = I2C_NO_OPTION_FRAME; - hi2c->XferISR = I2C_Master_ISR_IT; - - if (hi2c->XferCount > MAX_NBYTE_SIZE) - { - hi2c->XferSize = MAX_NBYTE_SIZE; - xfermode = I2C_RELOAD_MODE; - } - else - { - hi2c->XferSize = hi2c->XferCount; - xfermode = I2C_AUTOEND_MODE; - } - - /* Send Slave Address and Memory Address */ - if (I2C_RequestMemoryRead(hi2c, DevAddress, MemAddress, MemAddSize, I2C_TIMEOUT_FLAG, tickstart) != HAL_OK) - { - /* Process Unlocked */ - __HAL_UNLOCK(hi2c); - return HAL_ERROR; - } - - /* Set NBYTES to write and reload if hi2c->XferCount > MAX_NBYTE_SIZE and generate RESTART */ - I2C_TransferConfig(hi2c, DevAddress, (uint8_t)hi2c->XferSize, xfermode, I2C_GENERATE_START_READ); - - /* Process Unlocked */ - __HAL_UNLOCK(hi2c); - - /* Note : The I2C interrupts must be enabled after unlocking current process - to avoid the risk of I2C interrupt handle execution before current - process unlock */ - - /* Enable ERR, TC, STOP, NACK, RXI interrupt */ - /* possible to enable all of these */ - /* I2C_IT_ERRI | I2C_IT_TCI| I2C_IT_STOPI| I2C_IT_NACKI | I2C_IT_ADDRI | I2C_IT_RXI | I2C_IT_TXI */ - I2C_Enable_IRQ(hi2c, I2C_XFER_RX_IT); - - return HAL_OK; - } - else - { - return HAL_BUSY; - } -} -/** - * @brief Write an amount of data in non-blocking mode with DMA to a specific memory address - * @param hi2c Pointer to a I2C_HandleTypeDef structure that contains - * the configuration information for the specified I2C. - * @param DevAddress Target device address: The device 7 bits address value - * in datasheet must be shifted to the left before calling the interface - * @param MemAddress Internal memory address - * @param MemAddSize Size of internal memory address - * @param pData Pointer to data buffer - * @param Size Amount of data to be sent - * @retval HAL status - */ -HAL_StatusTypeDef HAL_I2C_Mem_Write_DMA(I2C_HandleTypeDef *hi2c, uint16_t DevAddress, uint16_t MemAddress, uint16_t MemAddSize, uint8_t *pData, uint16_t Size) -{ - uint32_t tickstart; - uint32_t xfermode; - HAL_StatusTypeDef dmaxferstatus; - - /* Check the parameters */ - assert_param(IS_I2C_MEMADD_SIZE(MemAddSize)); - - if (hi2c->State == HAL_I2C_STATE_READY) - { - if ((pData == NULL) || (Size == 0U)) - { - hi2c->ErrorCode = HAL_I2C_ERROR_INVALID_PARAM; - return HAL_ERROR; - } - - if (__HAL_I2C_GET_FLAG(hi2c, I2C_FLAG_BUSY) == SET) - { - return HAL_BUSY; - } - - /* Process Locked */ - __HAL_LOCK(hi2c); - - /* Init tickstart for timeout management*/ - tickstart = HAL_GetTick(); - - hi2c->State = HAL_I2C_STATE_BUSY_TX; - hi2c->Mode = HAL_I2C_MODE_MEM; - hi2c->ErrorCode = HAL_I2C_ERROR_NONE; - - /* Prepare transfer parameters */ - hi2c->pBuffPtr = pData; - hi2c->XferCount = Size; - hi2c->XferOptions = I2C_NO_OPTION_FRAME; - hi2c->XferISR = I2C_Master_ISR_DMA; - - if (hi2c->XferCount > MAX_NBYTE_SIZE) - { - hi2c->XferSize = MAX_NBYTE_SIZE; - xfermode = I2C_RELOAD_MODE; - } - else - { - hi2c->XferSize = hi2c->XferCount; - xfermode = I2C_AUTOEND_MODE; - } - - /* Send Slave Address and Memory Address */ - if (I2C_RequestMemoryWrite(hi2c, DevAddress, MemAddress, MemAddSize, I2C_TIMEOUT_FLAG, tickstart) != HAL_OK) - { - /* Process Unlocked */ - __HAL_UNLOCK(hi2c); - return HAL_ERROR; - } - - - if (hi2c->hdmatx != NULL) - { - /* Set the I2C DMA transfer complete callback */ - hi2c->hdmatx->XferCpltCallback = I2C_DMAMasterTransmitCplt; - - /* Set the DMA error callback */ - hi2c->hdmatx->XferErrorCallback = I2C_DMAError; - - /* Set the unused DMA callbacks to NULL */ - hi2c->hdmatx->XferHalfCpltCallback = NULL; - hi2c->hdmatx->XferAbortCallback = NULL; - - /* Enable the DMA stream */ - dmaxferstatus = HAL_DMA_Start_IT(hi2c->hdmatx, (uint32_t)pData, (uint32_t)&hi2c->Instance->TXDR, hi2c->XferSize); - } - else - { - /* Update I2C state */ - hi2c->State = HAL_I2C_STATE_READY; - hi2c->Mode = HAL_I2C_MODE_NONE; - - /* Update I2C error code */ - hi2c->ErrorCode |= HAL_I2C_ERROR_DMA_PARAM; - - /* Process Unlocked */ - __HAL_UNLOCK(hi2c); - - return HAL_ERROR; - } - - if (dmaxferstatus == HAL_OK) - { - /* Send Slave Address */ - /* Set NBYTES to write and reload if hi2c->XferCount > MAX_NBYTE_SIZE and generate RESTART */ - I2C_TransferConfig(hi2c, DevAddress, (uint8_t)hi2c->XferSize, xfermode, I2C_NO_STARTSTOP); - - /* Update XferCount value */ - hi2c->XferCount -= hi2c->XferSize; - - /* Process Unlocked */ - __HAL_UNLOCK(hi2c); - - /* Note : The I2C interrupts must be enabled after unlocking current process - to avoid the risk of I2C interrupt handle execution before current - process unlock */ - /* Enable ERR and NACK interrupts */ - I2C_Enable_IRQ(hi2c, I2C_XFER_ERROR_IT); - - /* Enable DMA Request */ - hi2c->Instance->CR1 |= I2C_CR1_TXDMAEN; - } - else - { - /* Update I2C state */ - hi2c->State = HAL_I2C_STATE_READY; - hi2c->Mode = HAL_I2C_MODE_NONE; - - /* Update I2C error code */ - hi2c->ErrorCode |= HAL_I2C_ERROR_DMA; - - /* Process Unlocked */ - __HAL_UNLOCK(hi2c); - - return HAL_ERROR; - } - - return HAL_OK; - } - else - { - return HAL_BUSY; - } -} - -/** - * @brief Reads an amount of data in non-blocking mode with DMA from a specific memory address. - * @param hi2c Pointer to a I2C_HandleTypeDef structure that contains - * the configuration information for the specified I2C. - * @param DevAddress Target device address: The device 7 bits address value - * in datasheet must be shifted to the left before calling the interface - * @param MemAddress Internal memory address - * @param MemAddSize Size of internal memory address - * @param pData Pointer to data buffer - * @param Size Amount of data to be read - * @retval HAL status - */ -HAL_StatusTypeDef HAL_I2C_Mem_Read_DMA(I2C_HandleTypeDef *hi2c, uint16_t DevAddress, uint16_t MemAddress, uint16_t MemAddSize, uint8_t *pData, uint16_t Size) -{ - uint32_t tickstart; - uint32_t xfermode; - HAL_StatusTypeDef dmaxferstatus; - - /* Check the parameters */ - assert_param(IS_I2C_MEMADD_SIZE(MemAddSize)); - - if (hi2c->State == HAL_I2C_STATE_READY) - { - if ((pData == NULL) || (Size == 0U)) - { - hi2c->ErrorCode = HAL_I2C_ERROR_INVALID_PARAM; - return HAL_ERROR; - } - - if (__HAL_I2C_GET_FLAG(hi2c, I2C_FLAG_BUSY) == SET) - { - return HAL_BUSY; - } - - /* Process Locked */ - __HAL_LOCK(hi2c); - - /* Init tickstart for timeout management*/ - tickstart = HAL_GetTick(); - - hi2c->State = HAL_I2C_STATE_BUSY_RX; - hi2c->Mode = HAL_I2C_MODE_MEM; - hi2c->ErrorCode = HAL_I2C_ERROR_NONE; - - /* Prepare transfer parameters */ - hi2c->pBuffPtr = pData; - hi2c->XferCount = Size; - hi2c->XferOptions = I2C_NO_OPTION_FRAME; - hi2c->XferISR = I2C_Master_ISR_DMA; - - if (hi2c->XferCount > MAX_NBYTE_SIZE) - { - hi2c->XferSize = MAX_NBYTE_SIZE; - xfermode = I2C_RELOAD_MODE; - } - else - { - hi2c->XferSize = hi2c->XferCount; - xfermode = I2C_AUTOEND_MODE; - } - - /* Send Slave Address and Memory Address */ - if (I2C_RequestMemoryRead(hi2c, DevAddress, MemAddress, MemAddSize, I2C_TIMEOUT_FLAG, tickstart) != HAL_OK) - { - /* Process Unlocked */ - __HAL_UNLOCK(hi2c); - return HAL_ERROR; - } - - if (hi2c->hdmarx != NULL) - { - /* Set the I2C DMA transfer complete callback */ - hi2c->hdmarx->XferCpltCallback = I2C_DMAMasterReceiveCplt; - - /* Set the DMA error callback */ - hi2c->hdmarx->XferErrorCallback = I2C_DMAError; - - /* Set the unused DMA callbacks to NULL */ - hi2c->hdmarx->XferHalfCpltCallback = NULL; - hi2c->hdmarx->XferAbortCallback = NULL; - - /* Enable the DMA stream */ - dmaxferstatus = HAL_DMA_Start_IT(hi2c->hdmarx, (uint32_t)&hi2c->Instance->RXDR, (uint32_t)pData, hi2c->XferSize); - } - else - { - /* Update I2C state */ - hi2c->State = HAL_I2C_STATE_READY; - hi2c->Mode = HAL_I2C_MODE_NONE; - - /* Update I2C error code */ - hi2c->ErrorCode |= HAL_I2C_ERROR_DMA_PARAM; - - /* Process Unlocked */ - __HAL_UNLOCK(hi2c); - - return HAL_ERROR; - } - - if (dmaxferstatus == HAL_OK) - { - /* Set NBYTES to write and reload if hi2c->XferCount > MAX_NBYTE_SIZE and generate RESTART */ - I2C_TransferConfig(hi2c, DevAddress, (uint8_t)hi2c->XferSize, xfermode, I2C_GENERATE_START_READ); - - /* Update XferCount value */ - hi2c->XferCount -= hi2c->XferSize; - - /* Process Unlocked */ - __HAL_UNLOCK(hi2c); - - /* Note : The I2C interrupts must be enabled after unlocking current process - to avoid the risk of I2C interrupt handle execution before current - process unlock */ - /* Enable ERR and NACK interrupts */ - I2C_Enable_IRQ(hi2c, I2C_XFER_ERROR_IT); - - /* Enable DMA Request */ - hi2c->Instance->CR1 |= I2C_CR1_RXDMAEN; - } - else - { - /* Update I2C state */ - hi2c->State = HAL_I2C_STATE_READY; - hi2c->Mode = HAL_I2C_MODE_NONE; - - /* Update I2C error code */ - hi2c->ErrorCode |= HAL_I2C_ERROR_DMA; - - /* Process Unlocked */ - __HAL_UNLOCK(hi2c); - - return HAL_ERROR; - } - - return HAL_OK; - } - else - { - return HAL_BUSY; - } -} - -/** - * @brief Checks if target device is ready for communication. - * @note This function is used with Memory devices - * @param hi2c Pointer to a I2C_HandleTypeDef structure that contains - * the configuration information for the specified I2C. - * @param DevAddress Target device address: The device 7 bits address value - * in datasheet must be shifted to the left before calling the interface - * @param Trials Number of trials - * @param Timeout Timeout duration - * @retval HAL status - */ -HAL_StatusTypeDef HAL_I2C_IsDeviceReady(I2C_HandleTypeDef *hi2c, uint16_t DevAddress, uint32_t Trials, uint32_t Timeout) -{ - uint32_t tickstart; - - __IO uint32_t I2C_Trials = 0UL; - - FlagStatus tmp1; - FlagStatus tmp2; - - if (hi2c->State == HAL_I2C_STATE_READY) - { - if (__HAL_I2C_GET_FLAG(hi2c, I2C_FLAG_BUSY) == SET) - { - return HAL_BUSY; - } - - /* Process Locked */ - __HAL_LOCK(hi2c); - - hi2c->State = HAL_I2C_STATE_BUSY; - hi2c->ErrorCode = HAL_I2C_ERROR_NONE; - - do - { - /* Generate Start */ - hi2c->Instance->CR2 = I2C_GENERATE_START(hi2c->Init.AddressingMode, DevAddress); - - /* No need to Check TC flag, with AUTOEND mode the stop is automatically generated */ - /* Wait until STOPF flag is set or a NACK flag is set*/ - tickstart = HAL_GetTick(); - - tmp1 = __HAL_I2C_GET_FLAG(hi2c, I2C_FLAG_STOPF); - tmp2 = __HAL_I2C_GET_FLAG(hi2c, I2C_FLAG_AF); - - while ((tmp1 == RESET) && (tmp2 == RESET)) - { - if (Timeout != HAL_MAX_DELAY) - { - if (((HAL_GetTick() - tickstart) > Timeout) || (Timeout == 0U)) - { - /* Update I2C state */ - hi2c->State = HAL_I2C_STATE_READY; - - /* Update I2C error code */ - hi2c->ErrorCode |= HAL_I2C_ERROR_TIMEOUT; - - /* Process Unlocked */ - __HAL_UNLOCK(hi2c); - - return HAL_ERROR; - } - } - - tmp1 = __HAL_I2C_GET_FLAG(hi2c, I2C_FLAG_STOPF); - tmp2 = __HAL_I2C_GET_FLAG(hi2c, I2C_FLAG_AF); - } - - /* Check if the NACKF flag has not been set */ - if (__HAL_I2C_GET_FLAG(hi2c, I2C_FLAG_AF) == RESET) - { - /* Wait until STOPF flag is reset */ - if (I2C_WaitOnFlagUntilTimeout(hi2c, I2C_FLAG_STOPF, RESET, Timeout, tickstart) != HAL_OK) - { - return HAL_ERROR; - } - - /* Clear STOP Flag */ - __HAL_I2C_CLEAR_FLAG(hi2c, I2C_FLAG_STOPF); - - /* Device is ready */ - hi2c->State = HAL_I2C_STATE_READY; - - /* Process Unlocked */ - __HAL_UNLOCK(hi2c); - - return HAL_OK; - } - else - { - /* Wait until STOPF flag is reset */ - if (I2C_WaitOnFlagUntilTimeout(hi2c, I2C_FLAG_STOPF, RESET, Timeout, tickstart) != HAL_OK) - { - return HAL_ERROR; - } - - /* Clear NACK Flag */ - __HAL_I2C_CLEAR_FLAG(hi2c, I2C_FLAG_AF); - - /* Clear STOP Flag, auto generated with autoend*/ - __HAL_I2C_CLEAR_FLAG(hi2c, I2C_FLAG_STOPF); - } - - /* Check if the maximum allowed number of trials has been reached */ - if (I2C_Trials == Trials) - { - /* Generate Stop */ - hi2c->Instance->CR2 |= I2C_CR2_STOP; - - /* Wait until STOPF flag is reset */ - if (I2C_WaitOnFlagUntilTimeout(hi2c, I2C_FLAG_STOPF, RESET, Timeout, tickstart) != HAL_OK) - { - return HAL_ERROR; - } - - /* Clear STOP Flag */ - __HAL_I2C_CLEAR_FLAG(hi2c, I2C_FLAG_STOPF); - } - - /* Increment Trials */ - I2C_Trials++; - } - while (I2C_Trials < Trials); - - /* Update I2C state */ - hi2c->State = HAL_I2C_STATE_READY; - - /* Update I2C error code */ - hi2c->ErrorCode |= HAL_I2C_ERROR_TIMEOUT; - - /* Process Unlocked */ - __HAL_UNLOCK(hi2c); - - return HAL_ERROR; - } - else - { - return HAL_BUSY; - } -} - -/** - * @brief Sequential transmit in master I2C mode an amount of data in non-blocking mode with Interrupt. - * @note This interface allow to manage repeated start condition when a direction change during transfer - * @param hi2c Pointer to a I2C_HandleTypeDef structure that contains - * the configuration information for the specified I2C. - * @param DevAddress Target device address: The device 7 bits address value - * in datasheet must be shifted to the left before calling the interface - * @param pData Pointer to data buffer - * @param Size Amount of data to be sent - * @param XferOptions Options of Transfer, value of @ref I2C_XFEROPTIONS - * @retval HAL status - */ -HAL_StatusTypeDef HAL_I2C_Master_Seq_Transmit_IT(I2C_HandleTypeDef *hi2c, uint16_t DevAddress, uint8_t *pData, uint16_t Size, uint32_t XferOptions) -{ - uint32_t xfermode; - uint32_t xferrequest = I2C_GENERATE_START_WRITE; - - /* Check the parameters */ - assert_param(IS_I2C_TRANSFER_OPTIONS_REQUEST(XferOptions)); - - if (hi2c->State == HAL_I2C_STATE_READY) - { - /* Process Locked */ - __HAL_LOCK(hi2c); - - hi2c->State = HAL_I2C_STATE_BUSY_TX; - hi2c->Mode = HAL_I2C_MODE_MASTER; - hi2c->ErrorCode = HAL_I2C_ERROR_NONE; - - /* Prepare transfer parameters */ - hi2c->pBuffPtr = pData; - hi2c->XferCount = Size; - hi2c->XferOptions = XferOptions; - hi2c->XferISR = I2C_Master_ISR_IT; - - /* If hi2c->XferCount > MAX_NBYTE_SIZE, use reload mode */ - if (hi2c->XferCount > MAX_NBYTE_SIZE) - { - hi2c->XferSize = MAX_NBYTE_SIZE; - xfermode = I2C_RELOAD_MODE; - } - else - { - hi2c->XferSize = hi2c->XferCount; - xfermode = hi2c->XferOptions; - } - - /* If transfer direction not change and there is no request to start another frame, do not generate Restart Condition */ - /* Mean Previous state is same as current state */ - if ((hi2c->PreviousState == I2C_STATE_MASTER_BUSY_TX) && (IS_I2C_TRANSFER_OTHER_OPTIONS_REQUEST(XferOptions) == 0)) - { - xferrequest = I2C_NO_STARTSTOP; - } - else - { - /* Convert OTHER_xxx XferOptions if any */ - I2C_ConvertOtherXferOptions(hi2c); - - /* Update xfermode accordingly if no reload is necessary */ - if (hi2c->XferCount < MAX_NBYTE_SIZE) - { - xfermode = hi2c->XferOptions; - } - } - - /* Send Slave Address and set NBYTES to write */ - I2C_TransferConfig(hi2c, DevAddress, (uint8_t)hi2c->XferSize, xfermode, xferrequest); - - /* Process Unlocked */ - __HAL_UNLOCK(hi2c); - - /* Note : The I2C interrupts must be enabled after unlocking current process - to avoid the risk of I2C interrupt handle execution before current - process unlock */ - I2C_Enable_IRQ(hi2c, I2C_XFER_TX_IT); - - return HAL_OK; - } - else - { - return HAL_BUSY; - } -} - -/** - * @brief Sequential transmit in master I2C mode an amount of data in non-blocking mode with DMA. - * @note This interface allow to manage repeated start condition when a direction change during transfer - * @param hi2c Pointer to a I2C_HandleTypeDef structure that contains - * the configuration information for the specified I2C. - * @param DevAddress Target device address: The device 7 bits address value - * in datasheet must be shifted to the left before calling the interface - * @param pData Pointer to data buffer - * @param Size Amount of data to be sent - * @param XferOptions Options of Transfer, value of @ref I2C_XFEROPTIONS - * @retval HAL status - */ -HAL_StatusTypeDef HAL_I2C_Master_Seq_Transmit_DMA(I2C_HandleTypeDef *hi2c, uint16_t DevAddress, uint8_t *pData, uint16_t Size, uint32_t XferOptions) -{ - uint32_t xfermode; - uint32_t xferrequest = I2C_GENERATE_START_WRITE; - HAL_StatusTypeDef dmaxferstatus; - - /* Check the parameters */ - assert_param(IS_I2C_TRANSFER_OPTIONS_REQUEST(XferOptions)); - - if (hi2c->State == HAL_I2C_STATE_READY) - { - /* Process Locked */ - __HAL_LOCK(hi2c); - - hi2c->State = HAL_I2C_STATE_BUSY_TX; - hi2c->Mode = HAL_I2C_MODE_MASTER; - hi2c->ErrorCode = HAL_I2C_ERROR_NONE; - - /* Prepare transfer parameters */ - hi2c->pBuffPtr = pData; - hi2c->XferCount = Size; - hi2c->XferOptions = XferOptions; - hi2c->XferISR = I2C_Master_ISR_DMA; - - /* If hi2c->XferCount > MAX_NBYTE_SIZE, use reload mode */ - if (hi2c->XferCount > MAX_NBYTE_SIZE) - { - hi2c->XferSize = MAX_NBYTE_SIZE; - xfermode = I2C_RELOAD_MODE; - } - else - { - hi2c->XferSize = hi2c->XferCount; - xfermode = hi2c->XferOptions; - } - - /* If transfer direction not change and there is no request to start another frame, do not generate Restart Condition */ - /* Mean Previous state is same as current state */ - if ((hi2c->PreviousState == I2C_STATE_MASTER_BUSY_TX) && (IS_I2C_TRANSFER_OTHER_OPTIONS_REQUEST(XferOptions) == 0)) - { - xferrequest = I2C_NO_STARTSTOP; - } - else - { - /* Convert OTHER_xxx XferOptions if any */ - I2C_ConvertOtherXferOptions(hi2c); - - /* Update xfermode accordingly if no reload is necessary */ - if (hi2c->XferCount < MAX_NBYTE_SIZE) - { - xfermode = hi2c->XferOptions; - } - } - - if (hi2c->XferSize > 0U) - { - if (hi2c->hdmatx != NULL) - { - /* Set the I2C DMA transfer complete callback */ - hi2c->hdmatx->XferCpltCallback = I2C_DMAMasterTransmitCplt; - - /* Set the DMA error callback */ - hi2c->hdmatx->XferErrorCallback = I2C_DMAError; - - /* Set the unused DMA callbacks to NULL */ - hi2c->hdmatx->XferHalfCpltCallback = NULL; - hi2c->hdmatx->XferAbortCallback = NULL; - - /* Enable the DMA stream */ - dmaxferstatus = HAL_DMA_Start_IT(hi2c->hdmatx, (uint32_t)pData, (uint32_t)&hi2c->Instance->TXDR, hi2c->XferSize); - } - else - { - /* Update I2C state */ - hi2c->State = HAL_I2C_STATE_READY; - hi2c->Mode = HAL_I2C_MODE_NONE; - - /* Update I2C error code */ - hi2c->ErrorCode |= HAL_I2C_ERROR_DMA_PARAM; - - /* Process Unlocked */ - __HAL_UNLOCK(hi2c); - - return HAL_ERROR; - } - - if (dmaxferstatus == HAL_OK) - { - /* Send Slave Address and set NBYTES to write */ - I2C_TransferConfig(hi2c, DevAddress, (uint8_t)hi2c->XferSize, xfermode, xferrequest); - - /* Update XferCount value */ - hi2c->XferCount -= hi2c->XferSize; - - /* Process Unlocked */ - __HAL_UNLOCK(hi2c); - - /* Note : The I2C interrupts must be enabled after unlocking current process - to avoid the risk of I2C interrupt handle execution before current - process unlock */ - /* Enable ERR and NACK interrupts */ - I2C_Enable_IRQ(hi2c, I2C_XFER_ERROR_IT); - - /* Enable DMA Request */ - hi2c->Instance->CR1 |= I2C_CR1_TXDMAEN; - } - else - { - /* Update I2C state */ - hi2c->State = HAL_I2C_STATE_READY; - hi2c->Mode = HAL_I2C_MODE_NONE; - - /* Update I2C error code */ - hi2c->ErrorCode |= HAL_I2C_ERROR_DMA; - - /* Process Unlocked */ - __HAL_UNLOCK(hi2c); - - return HAL_ERROR; - } - } - else - { - /* Update Transfer ISR function pointer */ - hi2c->XferISR = I2C_Master_ISR_IT; - - /* Send Slave Address */ - /* Set NBYTES to write and generate START condition */ - I2C_TransferConfig(hi2c, DevAddress, (uint8_t)hi2c->XferSize, I2C_AUTOEND_MODE, I2C_GENERATE_START_WRITE); - - /* Process Unlocked */ - __HAL_UNLOCK(hi2c); - - /* Note : The I2C interrupts must be enabled after unlocking current process - to avoid the risk of I2C interrupt handle execution before current - process unlock */ - /* Enable ERR, TC, STOP, NACK, TXI interrupt */ - /* possible to enable all of these */ - /* I2C_IT_ERRI | I2C_IT_TCI| I2C_IT_STOPI| I2C_IT_NACKI | I2C_IT_ADDRI | I2C_IT_RXI | I2C_IT_TXI */ - I2C_Enable_IRQ(hi2c, I2C_XFER_TX_IT); - } - - return HAL_OK; - } - else - { - return HAL_BUSY; - } -} - -/** - * @brief Sequential receive in master I2C mode an amount of data in non-blocking mode with Interrupt - * @note This interface allow to manage repeated start condition when a direction change during transfer - * @param hi2c Pointer to a I2C_HandleTypeDef structure that contains - * the configuration information for the specified I2C. - * @param DevAddress Target device address: The device 7 bits address value - * in datasheet must be shifted to the left before calling the interface - * @param pData Pointer to data buffer - * @param Size Amount of data to be sent - * @param XferOptions Options of Transfer, value of @ref I2C_XFEROPTIONS - * @retval HAL status - */ -HAL_StatusTypeDef HAL_I2C_Master_Seq_Receive_IT(I2C_HandleTypeDef *hi2c, uint16_t DevAddress, uint8_t *pData, uint16_t Size, uint32_t XferOptions) -{ - uint32_t xfermode; - uint32_t xferrequest = I2C_GENERATE_START_READ; - - /* Check the parameters */ - assert_param(IS_I2C_TRANSFER_OPTIONS_REQUEST(XferOptions)); - - if (hi2c->State == HAL_I2C_STATE_READY) - { - /* Process Locked */ - __HAL_LOCK(hi2c); - - hi2c->State = HAL_I2C_STATE_BUSY_RX; - hi2c->Mode = HAL_I2C_MODE_MASTER; - hi2c->ErrorCode = HAL_I2C_ERROR_NONE; - - /* Prepare transfer parameters */ - hi2c->pBuffPtr = pData; - hi2c->XferCount = Size; - hi2c->XferOptions = XferOptions; - hi2c->XferISR = I2C_Master_ISR_IT; - - /* If hi2c->XferCount > MAX_NBYTE_SIZE, use reload mode */ - if (hi2c->XferCount > MAX_NBYTE_SIZE) - { - hi2c->XferSize = MAX_NBYTE_SIZE; - xfermode = I2C_RELOAD_MODE; - } - else - { - hi2c->XferSize = hi2c->XferCount; - xfermode = hi2c->XferOptions; - } - - /* If transfer direction not change and there is no request to start another frame, do not generate Restart Condition */ - /* Mean Previous state is same as current state */ - if ((hi2c->PreviousState == I2C_STATE_MASTER_BUSY_RX) && (IS_I2C_TRANSFER_OTHER_OPTIONS_REQUEST(XferOptions) == 0)) - { - xferrequest = I2C_NO_STARTSTOP; - } - else - { - /* Convert OTHER_xxx XferOptions if any */ - I2C_ConvertOtherXferOptions(hi2c); - - /* Update xfermode accordingly if no reload is necessary */ - if (hi2c->XferCount < MAX_NBYTE_SIZE) - { - xfermode = hi2c->XferOptions; - } - } - - /* Send Slave Address and set NBYTES to read */ - I2C_TransferConfig(hi2c, DevAddress, (uint8_t)hi2c->XferSize, xfermode, xferrequest); - - /* Process Unlocked */ - __HAL_UNLOCK(hi2c); - - /* Note : The I2C interrupts must be enabled after unlocking current process - to avoid the risk of I2C interrupt handle execution before current - process unlock */ - I2C_Enable_IRQ(hi2c, I2C_XFER_RX_IT); - - return HAL_OK; - } - else - { - return HAL_BUSY; - } -} - -/** - * @brief Sequential receive in master I2C mode an amount of data in non-blocking mode with DMA - * @note This interface allow to manage repeated start condition when a direction change during transfer - * @param hi2c Pointer to a I2C_HandleTypeDef structure that contains - * the configuration information for the specified I2C. - * @param DevAddress Target device address: The device 7 bits address value - * in datasheet must be shifted to the left before calling the interface - * @param pData Pointer to data buffer - * @param Size Amount of data to be sent - * @param XferOptions Options of Transfer, value of @ref I2C_XFEROPTIONS - * @retval HAL status - */ -HAL_StatusTypeDef HAL_I2C_Master_Seq_Receive_DMA(I2C_HandleTypeDef *hi2c, uint16_t DevAddress, uint8_t *pData, uint16_t Size, uint32_t XferOptions) -{ - uint32_t xfermode; - uint32_t xferrequest = I2C_GENERATE_START_READ; - HAL_StatusTypeDef dmaxferstatus; - - /* Check the parameters */ - assert_param(IS_I2C_TRANSFER_OPTIONS_REQUEST(XferOptions)); - - if (hi2c->State == HAL_I2C_STATE_READY) - { - /* Process Locked */ - __HAL_LOCK(hi2c); - - hi2c->State = HAL_I2C_STATE_BUSY_RX; - hi2c->Mode = HAL_I2C_MODE_MASTER; - hi2c->ErrorCode = HAL_I2C_ERROR_NONE; - - /* Prepare transfer parameters */ - hi2c->pBuffPtr = pData; - hi2c->XferCount = Size; - hi2c->XferOptions = XferOptions; - hi2c->XferISR = I2C_Master_ISR_DMA; - - /* If hi2c->XferCount > MAX_NBYTE_SIZE, use reload mode */ - if (hi2c->XferCount > MAX_NBYTE_SIZE) - { - hi2c->XferSize = MAX_NBYTE_SIZE; - xfermode = I2C_RELOAD_MODE; - } - else - { - hi2c->XferSize = hi2c->XferCount; - xfermode = hi2c->XferOptions; - } - - /* If transfer direction not change and there is no request to start another frame, do not generate Restart Condition */ - /* Mean Previous state is same as current state */ - if ((hi2c->PreviousState == I2C_STATE_MASTER_BUSY_RX) && (IS_I2C_TRANSFER_OTHER_OPTIONS_REQUEST(XferOptions) == 0)) - { - xferrequest = I2C_NO_STARTSTOP; - } - else - { - /* Convert OTHER_xxx XferOptions if any */ - I2C_ConvertOtherXferOptions(hi2c); - - /* Update xfermode accordingly if no reload is necessary */ - if (hi2c->XferCount < MAX_NBYTE_SIZE) - { - xfermode = hi2c->XferOptions; - } - } - - if (hi2c->XferSize > 0U) - { - if (hi2c->hdmarx != NULL) - { - /* Set the I2C DMA transfer complete callback */ - hi2c->hdmarx->XferCpltCallback = I2C_DMAMasterReceiveCplt; - - /* Set the DMA error callback */ - hi2c->hdmarx->XferErrorCallback = I2C_DMAError; - - /* Set the unused DMA callbacks to NULL */ - hi2c->hdmarx->XferHalfCpltCallback = NULL; - hi2c->hdmarx->XferAbortCallback = NULL; - - /* Enable the DMA stream */ - dmaxferstatus = HAL_DMA_Start_IT(hi2c->hdmarx, (uint32_t)&hi2c->Instance->RXDR, (uint32_t)pData, hi2c->XferSize); - } - else - { - /* Update I2C state */ - hi2c->State = HAL_I2C_STATE_READY; - hi2c->Mode = HAL_I2C_MODE_NONE; - - /* Update I2C error code */ - hi2c->ErrorCode |= HAL_I2C_ERROR_DMA_PARAM; - - /* Process Unlocked */ - __HAL_UNLOCK(hi2c); - - return HAL_ERROR; - } - - if (dmaxferstatus == HAL_OK) - { - /* Send Slave Address and set NBYTES to read */ - I2C_TransferConfig(hi2c, DevAddress, (uint8_t)hi2c->XferSize, xfermode, xferrequest); - - /* Update XferCount value */ - hi2c->XferCount -= hi2c->XferSize; - - /* Process Unlocked */ - __HAL_UNLOCK(hi2c); - - /* Note : The I2C interrupts must be enabled after unlocking current process - to avoid the risk of I2C interrupt handle execution before current - process unlock */ - /* Enable ERR and NACK interrupts */ - I2C_Enable_IRQ(hi2c, I2C_XFER_ERROR_IT); - - /* Enable DMA Request */ - hi2c->Instance->CR1 |= I2C_CR1_RXDMAEN; - } - else - { - /* Update I2C state */ - hi2c->State = HAL_I2C_STATE_READY; - hi2c->Mode = HAL_I2C_MODE_NONE; - - /* Update I2C error code */ - hi2c->ErrorCode |= HAL_I2C_ERROR_DMA; - - /* Process Unlocked */ - __HAL_UNLOCK(hi2c); - - return HAL_ERROR; - } - } - else - { - /* Update Transfer ISR function pointer */ - hi2c->XferISR = I2C_Master_ISR_IT; - - /* Send Slave Address */ - /* Set NBYTES to read and generate START condition */ - I2C_TransferConfig(hi2c, DevAddress, (uint8_t)hi2c->XferSize, I2C_AUTOEND_MODE, I2C_GENERATE_START_READ); - - /* Process Unlocked */ - __HAL_UNLOCK(hi2c); - - /* Note : The I2C interrupts must be enabled after unlocking current process - to avoid the risk of I2C interrupt handle execution before current - process unlock */ - /* Enable ERR, TC, STOP, NACK, TXI interrupt */ - /* possible to enable all of these */ - /* I2C_IT_ERRI | I2C_IT_TCI| I2C_IT_STOPI| I2C_IT_NACKI | I2C_IT_ADDRI | I2C_IT_RXI | I2C_IT_TXI */ - I2C_Enable_IRQ(hi2c, I2C_XFER_TX_IT); - } - - return HAL_OK; - } - else - { - return HAL_BUSY; - } -} - -/** - * @brief Sequential transmit in slave/device I2C mode an amount of data in non-blocking mode with Interrupt - * @note This interface allow to manage repeated start condition when a direction change during transfer - * @param hi2c Pointer to a I2C_HandleTypeDef structure that contains - * the configuration information for the specified I2C. - * @param pData Pointer to data buffer - * @param Size Amount of data to be sent - * @param XferOptions Options of Transfer, value of @ref I2C_XFEROPTIONS - * @retval HAL status - */ -HAL_StatusTypeDef HAL_I2C_Slave_Seq_Transmit_IT(I2C_HandleTypeDef *hi2c, uint8_t *pData, uint16_t Size, uint32_t XferOptions) -{ - /* Check the parameters */ - assert_param(IS_I2C_TRANSFER_OPTIONS_REQUEST(XferOptions)); - - if (((uint32_t)hi2c->State & (uint32_t)HAL_I2C_STATE_LISTEN) == (uint32_t)HAL_I2C_STATE_LISTEN) - { - if ((pData == NULL) || (Size == 0U)) - { - hi2c->ErrorCode = HAL_I2C_ERROR_INVALID_PARAM; - return HAL_ERROR; - } - - /* Disable Interrupts, to prevent preemption during treatment in case of multicall */ - I2C_Disable_IRQ(hi2c, I2C_XFER_LISTEN_IT | I2C_XFER_TX_IT); - - /* Process Locked */ - __HAL_LOCK(hi2c); - - /* I2C cannot manage full duplex exchange so disable previous IT enabled if any */ - /* and then toggle the HAL slave RX state to TX state */ - if (hi2c->State == HAL_I2C_STATE_BUSY_RX_LISTEN) - { - /* Disable associated Interrupts */ - I2C_Disable_IRQ(hi2c, I2C_XFER_RX_IT); - - /* Abort DMA Xfer if any */ - if ((hi2c->Instance->CR1 & I2C_CR1_RXDMAEN) == I2C_CR1_RXDMAEN) - { - hi2c->Instance->CR1 &= ~I2C_CR1_RXDMAEN; - - if (hi2c->hdmarx != NULL) - { - /* Set the I2C DMA Abort callback : - will lead to call HAL_I2C_ErrorCallback() at end of DMA abort procedure */ - hi2c->hdmarx->XferAbortCallback = I2C_DMAAbort; - - /* Abort DMA RX */ - if (HAL_DMA_Abort_IT(hi2c->hdmarx) != HAL_OK) - { - /* Call Directly XferAbortCallback function in case of error */ - hi2c->hdmarx->XferAbortCallback(hi2c->hdmarx); - } - } - } - } - - hi2c->State = HAL_I2C_STATE_BUSY_TX_LISTEN; - hi2c->Mode = HAL_I2C_MODE_SLAVE; - hi2c->ErrorCode = HAL_I2C_ERROR_NONE; - - /* Enable Address Acknowledge */ - hi2c->Instance->CR2 &= ~I2C_CR2_NACK; - - /* Prepare transfer parameters */ - hi2c->pBuffPtr = pData; - hi2c->XferCount = Size; - hi2c->XferSize = hi2c->XferCount; - hi2c->XferOptions = XferOptions; - hi2c->XferISR = I2C_Slave_ISR_IT; - - if (I2C_GET_DIR(hi2c) == I2C_DIRECTION_RECEIVE) - { - /* Clear ADDR flag after prepare the transfer parameters */ - /* This action will generate an acknowledge to the Master */ - __HAL_I2C_CLEAR_FLAG(hi2c, I2C_FLAG_ADDR); - } - - /* Process Unlocked */ - __HAL_UNLOCK(hi2c); - - /* Note : The I2C interrupts must be enabled after unlocking current process - to avoid the risk of I2C interrupt handle execution before current - process unlock */ - /* REnable ADDR interrupt */ - I2C_Enable_IRQ(hi2c, I2C_XFER_TX_IT | I2C_XFER_LISTEN_IT); - - return HAL_OK; - } - else - { - return HAL_ERROR; - } -} - -/** - * @brief Sequential transmit in slave/device I2C mode an amount of data in non-blocking mode with DMA - * @note This interface allow to manage repeated start condition when a direction change during transfer - * @param hi2c Pointer to a I2C_HandleTypeDef structure that contains - * the configuration information for the specified I2C. - * @param pData Pointer to data buffer - * @param Size Amount of data to be sent - * @param XferOptions Options of Transfer, value of @ref I2C_XFEROPTIONS - * @retval HAL status - */ -HAL_StatusTypeDef HAL_I2C_Slave_Seq_Transmit_DMA(I2C_HandleTypeDef *hi2c, uint8_t *pData, uint16_t Size, uint32_t XferOptions) -{ - HAL_StatusTypeDef dmaxferstatus; - - /* Check the parameters */ - assert_param(IS_I2C_TRANSFER_OPTIONS_REQUEST(XferOptions)); - - if (((uint32_t)hi2c->State & (uint32_t)HAL_I2C_STATE_LISTEN) == (uint32_t)HAL_I2C_STATE_LISTEN) - { - if ((pData == NULL) || (Size == 0U)) - { - hi2c->ErrorCode = HAL_I2C_ERROR_INVALID_PARAM; - return HAL_ERROR; - } - - /* Process Locked */ - __HAL_LOCK(hi2c); - - /* Disable Interrupts, to prevent preemption during treatment in case of multicall */ - I2C_Disable_IRQ(hi2c, I2C_XFER_LISTEN_IT | I2C_XFER_TX_IT); - - /* I2C cannot manage full duplex exchange so disable previous IT enabled if any */ - /* and then toggle the HAL slave RX state to TX state */ - if (hi2c->State == HAL_I2C_STATE_BUSY_RX_LISTEN) - { - /* Disable associated Interrupts */ - I2C_Disable_IRQ(hi2c, I2C_XFER_RX_IT); - - if ((hi2c->Instance->CR1 & I2C_CR1_RXDMAEN) == I2C_CR1_RXDMAEN) - { - /* Abort DMA Xfer if any */ - if (hi2c->hdmarx != NULL) - { - hi2c->Instance->CR1 &= ~I2C_CR1_RXDMAEN; - - /* Set the I2C DMA Abort callback : - will lead to call HAL_I2C_ErrorCallback() at end of DMA abort procedure */ - hi2c->hdmarx->XferAbortCallback = I2C_DMAAbort; - - /* Abort DMA RX */ - if (HAL_DMA_Abort_IT(hi2c->hdmarx) != HAL_OK) - { - /* Call Directly XferAbortCallback function in case of error */ - hi2c->hdmarx->XferAbortCallback(hi2c->hdmarx); - } - } - } - } - else if (hi2c->State == HAL_I2C_STATE_BUSY_TX_LISTEN) - { - if ((hi2c->Instance->CR1 & I2C_CR1_TXDMAEN) == I2C_CR1_TXDMAEN) - { - hi2c->Instance->CR1 &= ~I2C_CR1_TXDMAEN; - - /* Abort DMA Xfer if any */ - if (hi2c->hdmatx != NULL) - { - /* Set the I2C DMA Abort callback : - will lead to call HAL_I2C_ErrorCallback() at end of DMA abort procedure */ - hi2c->hdmatx->XferAbortCallback = I2C_DMAAbort; - - /* Abort DMA TX */ - if (HAL_DMA_Abort_IT(hi2c->hdmatx) != HAL_OK) - { - /* Call Directly XferAbortCallback function in case of error */ - hi2c->hdmatx->XferAbortCallback(hi2c->hdmatx); - } - } - } - } - else - { - /* Nothing to do */ - } - - hi2c->State = HAL_I2C_STATE_BUSY_TX_LISTEN; - hi2c->Mode = HAL_I2C_MODE_SLAVE; - hi2c->ErrorCode = HAL_I2C_ERROR_NONE; - - /* Enable Address Acknowledge */ - hi2c->Instance->CR2 &= ~I2C_CR2_NACK; - - /* Prepare transfer parameters */ - hi2c->pBuffPtr = pData; - hi2c->XferCount = Size; - hi2c->XferSize = hi2c->XferCount; - hi2c->XferOptions = XferOptions; - hi2c->XferISR = I2C_Slave_ISR_DMA; - - if (hi2c->hdmatx != NULL) - { - /* Set the I2C DMA transfer complete callback */ - hi2c->hdmatx->XferCpltCallback = I2C_DMASlaveTransmitCplt; - - /* Set the DMA error callback */ - hi2c->hdmatx->XferErrorCallback = I2C_DMAError; - - /* Set the unused DMA callbacks to NULL */ - hi2c->hdmatx->XferHalfCpltCallback = NULL; - hi2c->hdmatx->XferAbortCallback = NULL; - - /* Enable the DMA stream */ - dmaxferstatus = HAL_DMA_Start_IT(hi2c->hdmatx, (uint32_t)pData, (uint32_t)&hi2c->Instance->TXDR, hi2c->XferSize); - } - else - { - /* Update I2C state */ - hi2c->State = HAL_I2C_STATE_LISTEN; - hi2c->Mode = HAL_I2C_MODE_NONE; - - /* Update I2C error code */ - hi2c->ErrorCode |= HAL_I2C_ERROR_DMA_PARAM; - - /* Process Unlocked */ - __HAL_UNLOCK(hi2c); - - return HAL_ERROR; - } - - if (dmaxferstatus == HAL_OK) - { - /* Update XferCount value */ - hi2c->XferCount -= hi2c->XferSize; - - /* Reset XferSize */ - hi2c->XferSize = 0; - } - else - { - /* Update I2C state */ - hi2c->State = HAL_I2C_STATE_LISTEN; - hi2c->Mode = HAL_I2C_MODE_NONE; - - /* Update I2C error code */ - hi2c->ErrorCode |= HAL_I2C_ERROR_DMA; - - /* Process Unlocked */ - __HAL_UNLOCK(hi2c); - - return HAL_ERROR; - } - - if (I2C_GET_DIR(hi2c) == I2C_DIRECTION_RECEIVE) - { - /* Clear ADDR flag after prepare the transfer parameters */ - /* This action will generate an acknowledge to the Master */ - __HAL_I2C_CLEAR_FLAG(hi2c, I2C_FLAG_ADDR); - } - - /* Process Unlocked */ - __HAL_UNLOCK(hi2c); - - /* Note : The I2C interrupts must be enabled after unlocking current process - to avoid the risk of I2C interrupt handle execution before current - process unlock */ - /* Enable ERR, STOP, NACK, ADDR interrupts */ - I2C_Enable_IRQ(hi2c, I2C_XFER_LISTEN_IT); - - /* Enable DMA Request */ - hi2c->Instance->CR1 |= I2C_CR1_TXDMAEN; - - return HAL_OK; - } - else - { - return HAL_ERROR; - } -} - -/** - * @brief Sequential receive in slave/device I2C mode an amount of data in non-blocking mode with Interrupt - * @note This interface allow to manage repeated start condition when a direction change during transfer - * @param hi2c Pointer to a I2C_HandleTypeDef structure that contains - * the configuration information for the specified I2C. - * @param pData Pointer to data buffer - * @param Size Amount of data to be sent - * @param XferOptions Options of Transfer, value of @ref I2C_XFEROPTIONS - * @retval HAL status - */ -HAL_StatusTypeDef HAL_I2C_Slave_Seq_Receive_IT(I2C_HandleTypeDef *hi2c, uint8_t *pData, uint16_t Size, uint32_t XferOptions) -{ - /* Check the parameters */ - assert_param(IS_I2C_TRANSFER_OPTIONS_REQUEST(XferOptions)); - - if (((uint32_t)hi2c->State & (uint32_t)HAL_I2C_STATE_LISTEN) == (uint32_t)HAL_I2C_STATE_LISTEN) - { - if ((pData == NULL) || (Size == 0U)) - { - hi2c->ErrorCode = HAL_I2C_ERROR_INVALID_PARAM; - return HAL_ERROR; - } - - /* Disable Interrupts, to prevent preemption during treatment in case of multicall */ - I2C_Disable_IRQ(hi2c, I2C_XFER_LISTEN_IT | I2C_XFER_RX_IT); - - /* Process Locked */ - __HAL_LOCK(hi2c); - - /* I2C cannot manage full duplex exchange so disable previous IT enabled if any */ - /* and then toggle the HAL slave TX state to RX state */ - if (hi2c->State == HAL_I2C_STATE_BUSY_TX_LISTEN) - { - /* Disable associated Interrupts */ - I2C_Disable_IRQ(hi2c, I2C_XFER_TX_IT); - - if ((hi2c->Instance->CR1 & I2C_CR1_TXDMAEN) == I2C_CR1_TXDMAEN) - { - hi2c->Instance->CR1 &= ~I2C_CR1_TXDMAEN; - - /* Abort DMA Xfer if any */ - if (hi2c->hdmatx != NULL) - { - /* Set the I2C DMA Abort callback : - will lead to call HAL_I2C_ErrorCallback() at end of DMA abort procedure */ - hi2c->hdmatx->XferAbortCallback = I2C_DMAAbort; - - /* Abort DMA TX */ - if (HAL_DMA_Abort_IT(hi2c->hdmatx) != HAL_OK) - { - /* Call Directly XferAbortCallback function in case of error */ - hi2c->hdmatx->XferAbortCallback(hi2c->hdmatx); - } - } - } - } - - hi2c->State = HAL_I2C_STATE_BUSY_RX_LISTEN; - hi2c->Mode = HAL_I2C_MODE_SLAVE; - hi2c->ErrorCode = HAL_I2C_ERROR_NONE; - - /* Enable Address Acknowledge */ - hi2c->Instance->CR2 &= ~I2C_CR2_NACK; - - /* Prepare transfer parameters */ - hi2c->pBuffPtr = pData; - hi2c->XferCount = Size; - hi2c->XferSize = hi2c->XferCount; - hi2c->XferOptions = XferOptions; - hi2c->XferISR = I2C_Slave_ISR_IT; - - if (I2C_GET_DIR(hi2c) == I2C_DIRECTION_TRANSMIT) - { - /* Clear ADDR flag after prepare the transfer parameters */ - /* This action will generate an acknowledge to the Master */ - __HAL_I2C_CLEAR_FLAG(hi2c, I2C_FLAG_ADDR); - } - - /* Process Unlocked */ - __HAL_UNLOCK(hi2c); - - /* Note : The I2C interrupts must be enabled after unlocking current process - to avoid the risk of I2C interrupt handle execution before current - process unlock */ - /* REnable ADDR interrupt */ - I2C_Enable_IRQ(hi2c, I2C_XFER_RX_IT | I2C_XFER_LISTEN_IT); - - return HAL_OK; - } - else - { - return HAL_ERROR; - } -} - -/** - * @brief Sequential receive in slave/device I2C mode an amount of data in non-blocking mode with DMA - * @note This interface allow to manage repeated start condition when a direction change during transfer - * @param hi2c Pointer to a I2C_HandleTypeDef structure that contains - * the configuration information for the specified I2C. - * @param pData Pointer to data buffer - * @param Size Amount of data to be sent - * @param XferOptions Options of Transfer, value of @ref I2C_XFEROPTIONS - * @retval HAL status - */ -HAL_StatusTypeDef HAL_I2C_Slave_Seq_Receive_DMA(I2C_HandleTypeDef *hi2c, uint8_t *pData, uint16_t Size, uint32_t XferOptions) -{ - HAL_StatusTypeDef dmaxferstatus; - - /* Check the parameters */ - assert_param(IS_I2C_TRANSFER_OPTIONS_REQUEST(XferOptions)); - - if (((uint32_t)hi2c->State & (uint32_t)HAL_I2C_STATE_LISTEN) == (uint32_t)HAL_I2C_STATE_LISTEN) - { - if ((pData == NULL) || (Size == 0U)) - { - hi2c->ErrorCode = HAL_I2C_ERROR_INVALID_PARAM; - return HAL_ERROR; - } - - /* Disable Interrupts, to prevent preemption during treatment in case of multicall */ - I2C_Disable_IRQ(hi2c, I2C_XFER_LISTEN_IT | I2C_XFER_RX_IT); - - /* Process Locked */ - __HAL_LOCK(hi2c); - - /* I2C cannot manage full duplex exchange so disable previous IT enabled if any */ - /* and then toggle the HAL slave TX state to RX state */ - if (hi2c->State == HAL_I2C_STATE_BUSY_TX_LISTEN) - { - /* Disable associated Interrupts */ - I2C_Disable_IRQ(hi2c, I2C_XFER_TX_IT); - - if ((hi2c->Instance->CR1 & I2C_CR1_TXDMAEN) == I2C_CR1_TXDMAEN) - { - /* Abort DMA Xfer if any */ - if (hi2c->hdmatx != NULL) - { - hi2c->Instance->CR1 &= ~I2C_CR1_TXDMAEN; - - /* Set the I2C DMA Abort callback : - will lead to call HAL_I2C_ErrorCallback() at end of DMA abort procedure */ - hi2c->hdmatx->XferAbortCallback = I2C_DMAAbort; - - /* Abort DMA TX */ - if (HAL_DMA_Abort_IT(hi2c->hdmatx) != HAL_OK) - { - /* Call Directly XferAbortCallback function in case of error */ - hi2c->hdmatx->XferAbortCallback(hi2c->hdmatx); - } - } - } - } - else if (hi2c->State == HAL_I2C_STATE_BUSY_RX_LISTEN) - { - if ((hi2c->Instance->CR1 & I2C_CR1_RXDMAEN) == I2C_CR1_RXDMAEN) - { - hi2c->Instance->CR1 &= ~I2C_CR1_RXDMAEN; - - /* Abort DMA Xfer if any */ - if (hi2c->hdmarx != NULL) - { - /* Set the I2C DMA Abort callback : - will lead to call HAL_I2C_ErrorCallback() at end of DMA abort procedure */ - hi2c->hdmarx->XferAbortCallback = I2C_DMAAbort; - - /* Abort DMA RX */ - if (HAL_DMA_Abort_IT(hi2c->hdmarx) != HAL_OK) - { - /* Call Directly XferAbortCallback function in case of error */ - hi2c->hdmarx->XferAbortCallback(hi2c->hdmarx); - } - } - } - } - else - { - /* Nothing to do */ - } - - hi2c->State = HAL_I2C_STATE_BUSY_RX_LISTEN; - hi2c->Mode = HAL_I2C_MODE_SLAVE; - hi2c->ErrorCode = HAL_I2C_ERROR_NONE; - - /* Enable Address Acknowledge */ - hi2c->Instance->CR2 &= ~I2C_CR2_NACK; - - /* Prepare transfer parameters */ - hi2c->pBuffPtr = pData; - hi2c->XferCount = Size; - hi2c->XferSize = hi2c->XferCount; - hi2c->XferOptions = XferOptions; - hi2c->XferISR = I2C_Slave_ISR_DMA; - - if (hi2c->hdmarx != NULL) - { - /* Set the I2C DMA transfer complete callback */ - hi2c->hdmarx->XferCpltCallback = I2C_DMASlaveReceiveCplt; - - /* Set the DMA error callback */ - hi2c->hdmarx->XferErrorCallback = I2C_DMAError; - - /* Set the unused DMA callbacks to NULL */ - hi2c->hdmarx->XferHalfCpltCallback = NULL; - hi2c->hdmarx->XferAbortCallback = NULL; - - /* Enable the DMA stream */ - dmaxferstatus = HAL_DMA_Start_IT(hi2c->hdmarx, (uint32_t)&hi2c->Instance->RXDR, (uint32_t)pData, hi2c->XferSize); - } - else - { - /* Update I2C state */ - hi2c->State = HAL_I2C_STATE_LISTEN; - hi2c->Mode = HAL_I2C_MODE_NONE; - - /* Update I2C error code */ - hi2c->ErrorCode |= HAL_I2C_ERROR_DMA_PARAM; - - /* Process Unlocked */ - __HAL_UNLOCK(hi2c); - - return HAL_ERROR; - } - - if (dmaxferstatus == HAL_OK) - { - /* Update XferCount value */ - hi2c->XferCount -= hi2c->XferSize; - - /* Reset XferSize */ - hi2c->XferSize = 0; - } - else - { - /* Update I2C state */ - hi2c->State = HAL_I2C_STATE_LISTEN; - hi2c->Mode = HAL_I2C_MODE_NONE; - - /* Update I2C error code */ - hi2c->ErrorCode |= HAL_I2C_ERROR_DMA; - - /* Process Unlocked */ - __HAL_UNLOCK(hi2c); - - return HAL_ERROR; - } - - if (I2C_GET_DIR(hi2c) == I2C_DIRECTION_TRANSMIT) - { - /* Clear ADDR flag after prepare the transfer parameters */ - /* This action will generate an acknowledge to the Master */ - __HAL_I2C_CLEAR_FLAG(hi2c, I2C_FLAG_ADDR); - } - - /* Process Unlocked */ - __HAL_UNLOCK(hi2c); - - /* Note : The I2C interrupts must be enabled after unlocking current process - to avoid the risk of I2C interrupt handle execution before current - process unlock */ - /* REnable ADDR interrupt */ - I2C_Enable_IRQ(hi2c, I2C_XFER_RX_IT | I2C_XFER_LISTEN_IT); - - /* Enable DMA Request */ - hi2c->Instance->CR1 |= I2C_CR1_RXDMAEN; - - return HAL_OK; - } - else - { - return HAL_ERROR; - } -} - -/** - * @brief Enable the Address listen mode with Interrupt. - * @param hi2c Pointer to a I2C_HandleTypeDef structure that contains - * the configuration information for the specified I2C. - * @retval HAL status - */ -HAL_StatusTypeDef HAL_I2C_EnableListen_IT(I2C_HandleTypeDef *hi2c) -{ - if (hi2c->State == HAL_I2C_STATE_READY) - { - hi2c->State = HAL_I2C_STATE_LISTEN; - hi2c->XferISR = I2C_Slave_ISR_IT; - - /* Enable the Address Match interrupt */ - I2C_Enable_IRQ(hi2c, I2C_XFER_LISTEN_IT); - - return HAL_OK; - } - else - { - return HAL_BUSY; - } -} - -/** - * @brief Disable the Address listen mode with Interrupt. - * @param hi2c Pointer to a I2C_HandleTypeDef structure that contains - * the configuration information for the specified I2C - * @retval HAL status - */ -HAL_StatusTypeDef HAL_I2C_DisableListen_IT(I2C_HandleTypeDef *hi2c) -{ - /* Declaration of tmp to prevent undefined behavior of volatile usage */ - uint32_t tmp; - - /* Disable Address listen mode only if a transfer is not ongoing */ - if (hi2c->State == HAL_I2C_STATE_LISTEN) - { - tmp = (uint32_t)(hi2c->State) & I2C_STATE_MSK; - hi2c->PreviousState = tmp | (uint32_t)(hi2c->Mode); - hi2c->State = HAL_I2C_STATE_READY; - hi2c->Mode = HAL_I2C_MODE_NONE; - hi2c->XferISR = NULL; - - /* Disable the Address Match interrupt */ - I2C_Disable_IRQ(hi2c, I2C_XFER_LISTEN_IT); - - return HAL_OK; - } - else - { - return HAL_BUSY; - } -} - -/** - * @brief Abort a master I2C IT or DMA process communication with Interrupt. - * @param hi2c Pointer to a I2C_HandleTypeDef structure that contains - * the configuration information for the specified I2C. - * @param DevAddress Target device address: The device 7 bits address value - * in datasheet must be shifted to the left before calling the interface - * @retval HAL status - */ -HAL_StatusTypeDef HAL_I2C_Master_Abort_IT(I2C_HandleTypeDef *hi2c, uint16_t DevAddress) -{ - if (hi2c->Mode == HAL_I2C_MODE_MASTER) - { - /* Process Locked */ - __HAL_LOCK(hi2c); - - /* Disable Interrupts */ - I2C_Disable_IRQ(hi2c, I2C_XFER_RX_IT); - I2C_Disable_IRQ(hi2c, I2C_XFER_TX_IT); - - /* Set State at HAL_I2C_STATE_ABORT */ - hi2c->State = HAL_I2C_STATE_ABORT; - - /* Set NBYTES to 1 to generate a dummy read on I2C peripheral */ - /* Set AUTOEND mode, this will generate a NACK then STOP condition to abort the current transfer */ - I2C_TransferConfig(hi2c, DevAddress, 1, I2C_AUTOEND_MODE, I2C_GENERATE_STOP); - - /* Process Unlocked */ - __HAL_UNLOCK(hi2c); - - /* Note : The I2C interrupts must be enabled after unlocking current process - to avoid the risk of I2C interrupt handle execution before current - process unlock */ - I2C_Enable_IRQ(hi2c, I2C_XFER_CPLT_IT); - - return HAL_OK; - } - else - { - /* Wrong usage of abort function */ - /* This function should be used only in case of abort monitored by master device */ - return HAL_ERROR; - } -} - -/** - * @} - */ - -/** @defgroup I2C_IRQ_Handler_and_Callbacks IRQ Handler and Callbacks - * @{ - */ - -/** - * @brief This function handles I2C event interrupt request. - * @param hi2c Pointer to a I2C_HandleTypeDef structure that contains - * the configuration information for the specified I2C. - * @retval None - */ -void HAL_I2C_EV_IRQHandler(I2C_HandleTypeDef *hi2c) -{ - /* Get current IT Flags and IT sources value */ - uint32_t itflags = READ_REG(hi2c->Instance->ISR); - uint32_t itsources = READ_REG(hi2c->Instance->CR1); - - /* I2C events treatment -------------------------------------*/ - if (hi2c->XferISR != NULL) - { - hi2c->XferISR(hi2c, itflags, itsources); - } -} - -/** - * @brief This function handles I2C error interrupt request. - * @param hi2c Pointer to a I2C_HandleTypeDef structure that contains - * the configuration information for the specified I2C. - * @retval None - */ -void HAL_I2C_ER_IRQHandler(I2C_HandleTypeDef *hi2c) -{ - uint32_t itflags = READ_REG(hi2c->Instance->ISR); - uint32_t itsources = READ_REG(hi2c->Instance->CR1); - uint32_t tmperror; - - /* I2C Bus error interrupt occurred ------------------------------------*/ - if ((I2C_CHECK_FLAG(itflags, I2C_FLAG_BERR) != RESET) && (I2C_CHECK_IT_SOURCE(itsources, I2C_IT_ERRI) != RESET)) - { - hi2c->ErrorCode |= HAL_I2C_ERROR_BERR; - - /* Clear BERR flag */ - __HAL_I2C_CLEAR_FLAG(hi2c, I2C_FLAG_BERR); - } - - /* I2C Over-Run/Under-Run interrupt occurred ----------------------------------------*/ - if ((I2C_CHECK_FLAG(itflags, I2C_FLAG_OVR) != RESET) && (I2C_CHECK_IT_SOURCE(itsources, I2C_IT_ERRI) != RESET)) - { - hi2c->ErrorCode |= HAL_I2C_ERROR_OVR; - - /* Clear OVR flag */ - __HAL_I2C_CLEAR_FLAG(hi2c, I2C_FLAG_OVR); - } - - /* I2C Arbitration Loss error interrupt occurred -------------------------------------*/ - if ((I2C_CHECK_FLAG(itflags, I2C_FLAG_ARLO) != RESET) && (I2C_CHECK_IT_SOURCE(itsources, I2C_IT_ERRI) != RESET)) - { - hi2c->ErrorCode |= HAL_I2C_ERROR_ARLO; - - /* Clear ARLO flag */ - __HAL_I2C_CLEAR_FLAG(hi2c, I2C_FLAG_ARLO); - } - - /* Store current volatile hi2c->ErrorCode, misra rule */ - tmperror = hi2c->ErrorCode; - - /* Call the Error Callback in case of Error detected */ - if ((tmperror & (HAL_I2C_ERROR_BERR | HAL_I2C_ERROR_OVR | HAL_I2C_ERROR_ARLO)) != HAL_I2C_ERROR_NONE) - { - I2C_ITError(hi2c, tmperror); - } -} - -/** - * @brief Master Tx Transfer completed callback. - * @param hi2c Pointer to a I2C_HandleTypeDef structure that contains - * the configuration information for the specified I2C. - * @retval None - */ -__weak void HAL_I2C_MasterTxCpltCallback(I2C_HandleTypeDef *hi2c) -{ - /* Prevent unused argument(s) compilation warning */ - UNUSED(hi2c); - - /* NOTE : This function should not be modified, when the callback is needed, - the HAL_I2C_MasterTxCpltCallback could be implemented in the user file - */ -} - -/** - * @brief Master Rx Transfer completed callback. - * @param hi2c Pointer to a I2C_HandleTypeDef structure that contains - * the configuration information for the specified I2C. - * @retval None - */ -__weak void HAL_I2C_MasterRxCpltCallback(I2C_HandleTypeDef *hi2c) -{ - /* Prevent unused argument(s) compilation warning */ - UNUSED(hi2c); - - /* NOTE : This function should not be modified, when the callback is needed, - the HAL_I2C_MasterRxCpltCallback could be implemented in the user file - */ -} - -/** @brief Slave Tx Transfer completed callback. - * @param hi2c Pointer to a I2C_HandleTypeDef structure that contains - * the configuration information for the specified I2C. - * @retval None - */ -__weak void HAL_I2C_SlaveTxCpltCallback(I2C_HandleTypeDef *hi2c) -{ - /* Prevent unused argument(s) compilation warning */ - UNUSED(hi2c); - - /* NOTE : This function should not be modified, when the callback is needed, - the HAL_I2C_SlaveTxCpltCallback could be implemented in the user file - */ -} - -/** - * @brief Slave Rx Transfer completed callback. - * @param hi2c Pointer to a I2C_HandleTypeDef structure that contains - * the configuration information for the specified I2C. - * @retval None - */ -__weak void HAL_I2C_SlaveRxCpltCallback(I2C_HandleTypeDef *hi2c) -{ - /* Prevent unused argument(s) compilation warning */ - UNUSED(hi2c); - - /* NOTE : This function should not be modified, when the callback is needed, - the HAL_I2C_SlaveRxCpltCallback could be implemented in the user file - */ -} - -/** - * @brief Slave Address Match callback. - * @param hi2c Pointer to a I2C_HandleTypeDef structure that contains - * the configuration information for the specified I2C. - * @param TransferDirection Master request Transfer Direction (Write/Read), value of @ref I2C_XFERDIRECTION - * @param AddrMatchCode Address Match Code - * @retval None - */ -__weak void HAL_I2C_AddrCallback(I2C_HandleTypeDef *hi2c, uint8_t TransferDirection, uint16_t AddrMatchCode) -{ - /* Prevent unused argument(s) compilation warning */ - UNUSED(hi2c); - UNUSED(TransferDirection); - UNUSED(AddrMatchCode); - - /* NOTE : This function should not be modified, when the callback is needed, - the HAL_I2C_AddrCallback() could be implemented in the user file - */ -} - -/** - * @brief Listen Complete callback. - * @param hi2c Pointer to a I2C_HandleTypeDef structure that contains - * the configuration information for the specified I2C. - * @retval None - */ -__weak void HAL_I2C_ListenCpltCallback(I2C_HandleTypeDef *hi2c) -{ - /* Prevent unused argument(s) compilation warning */ - UNUSED(hi2c); - - /* NOTE : This function should not be modified, when the callback is needed, - the HAL_I2C_ListenCpltCallback() could be implemented in the user file - */ -} - -/** - * @brief Memory Tx Transfer completed callback. - * @param hi2c Pointer to a I2C_HandleTypeDef structure that contains - * the configuration information for the specified I2C. - * @retval None - */ -__weak void HAL_I2C_MemTxCpltCallback(I2C_HandleTypeDef *hi2c) -{ - /* Prevent unused argument(s) compilation warning */ - UNUSED(hi2c); - - /* NOTE : This function should not be modified, when the callback is needed, - the HAL_I2C_MemTxCpltCallback could be implemented in the user file - */ -} - -/** - * @brief Memory Rx Transfer completed callback. - * @param hi2c Pointer to a I2C_HandleTypeDef structure that contains - * the configuration information for the specified I2C. - * @retval None - */ -__weak void HAL_I2C_MemRxCpltCallback(I2C_HandleTypeDef *hi2c) -{ - /* Prevent unused argument(s) compilation warning */ - UNUSED(hi2c); - - /* NOTE : This function should not be modified, when the callback is needed, - the HAL_I2C_MemRxCpltCallback could be implemented in the user file - */ -} - -/** - * @brief I2C error callback. - * @param hi2c Pointer to a I2C_HandleTypeDef structure that contains - * the configuration information for the specified I2C. - * @retval None - */ -__weak void HAL_I2C_ErrorCallback(I2C_HandleTypeDef *hi2c) -{ - /* Prevent unused argument(s) compilation warning */ - UNUSED(hi2c); - - /* NOTE : This function should not be modified, when the callback is needed, - the HAL_I2C_ErrorCallback could be implemented in the user file - */ -} - -/** - * @brief I2C abort callback. - * @param hi2c Pointer to a I2C_HandleTypeDef structure that contains - * the configuration information for the specified I2C. - * @retval None - */ -__weak void HAL_I2C_AbortCpltCallback(I2C_HandleTypeDef *hi2c) -{ - /* Prevent unused argument(s) compilation warning */ - UNUSED(hi2c); - - /* NOTE : This function should not be modified, when the callback is needed, - the HAL_I2C_AbortCpltCallback could be implemented in the user file - */ -} - -/** - * @} - */ - -/** @defgroup I2C_Exported_Functions_Group3 Peripheral State, Mode and Error functions - * @brief Peripheral State, Mode and Error functions - * -@verbatim - =============================================================================== - ##### Peripheral State, Mode and Error functions ##### - =============================================================================== - [..] - This subsection permit to get in run-time the status of the peripheral - and the data flow. - -@endverbatim - * @{ - */ - -/** - * @brief Return the I2C handle state. - * @param hi2c Pointer to a I2C_HandleTypeDef structure that contains - * the configuration information for the specified I2C. - * @retval HAL state - */ -HAL_I2C_StateTypeDef HAL_I2C_GetState(I2C_HandleTypeDef *hi2c) -{ - /* Return I2C handle state */ - return hi2c->State; -} - -/** - * @brief Returns the I2C Master, Slave, Memory or no mode. - * @param hi2c Pointer to a I2C_HandleTypeDef structure that contains - * the configuration information for I2C module - * @retval HAL mode - */ -HAL_I2C_ModeTypeDef HAL_I2C_GetMode(I2C_HandleTypeDef *hi2c) -{ - return hi2c->Mode; -} - -/** -* @brief Return the I2C error code. - * @param hi2c Pointer to a I2C_HandleTypeDef structure that contains - * the configuration information for the specified I2C. -* @retval I2C Error Code -*/ -uint32_t HAL_I2C_GetError(I2C_HandleTypeDef *hi2c) -{ - return hi2c->ErrorCode; -} - -/** - * @} - */ - -/** - * @} - */ - -/** @addtogroup I2C_Private_Functions - * @{ - */ - -/** - * @brief Interrupt Sub-Routine which handle the Interrupt Flags Master Mode with Interrupt. - * @param hi2c Pointer to a I2C_HandleTypeDef structure that contains - * the configuration information for the specified I2C. - * @param ITFlags Interrupt flags to handle. - * @param ITSources Interrupt sources enabled. - * @retval HAL status - */ -static HAL_StatusTypeDef I2C_Master_ISR_IT(struct __I2C_HandleTypeDef *hi2c, uint32_t ITFlags, uint32_t ITSources) -{ - uint16_t devaddress; - uint32_t tmpITFlags = ITFlags; - - /* Process Locked */ - __HAL_LOCK(hi2c); - - if ((I2C_CHECK_FLAG(tmpITFlags, I2C_FLAG_AF) != RESET) && (I2C_CHECK_IT_SOURCE(ITSources, I2C_IT_NACKI) != RESET)) - { - /* Clear NACK Flag */ - __HAL_I2C_CLEAR_FLAG(hi2c, I2C_FLAG_AF); - - /* Set corresponding Error Code */ - /* No need to generate STOP, it is automatically done */ - /* Error callback will be send during stop flag treatment */ - hi2c->ErrorCode |= HAL_I2C_ERROR_AF; - - /* Flush TX register */ - I2C_Flush_TXDR(hi2c); - } - else if ((I2C_CHECK_FLAG(tmpITFlags, I2C_FLAG_RXNE) != RESET) && (I2C_CHECK_IT_SOURCE(ITSources, I2C_IT_RXI) != RESET)) - { - /* Remove RXNE flag on temporary variable as read done */ - tmpITFlags &= ~I2C_FLAG_RXNE; - - /* Read data from RXDR */ - *hi2c->pBuffPtr = (uint8_t)hi2c->Instance->RXDR; - - /* Increment Buffer pointer */ - hi2c->pBuffPtr++; - - hi2c->XferSize--; - hi2c->XferCount--; - } - else if ((I2C_CHECK_FLAG(tmpITFlags, I2C_FLAG_TXIS) != RESET) && (I2C_CHECK_IT_SOURCE(ITSources, I2C_IT_TXI) != RESET)) - { - /* Write data to TXDR */ - hi2c->Instance->TXDR = *hi2c->pBuffPtr; - - /* Increment Buffer pointer */ - hi2c->pBuffPtr++; - - hi2c->XferSize--; - hi2c->XferCount--; - } - else if ((I2C_CHECK_FLAG(tmpITFlags, I2C_FLAG_TCR) != RESET) && (I2C_CHECK_IT_SOURCE(ITSources, I2C_IT_TCI) != RESET)) - { - if ((hi2c->XferCount != 0U) && (hi2c->XferSize == 0U)) - { - devaddress = (uint16_t)(hi2c->Instance->CR2 & I2C_CR2_SADD); - - if (hi2c->XferCount > MAX_NBYTE_SIZE) - { - hi2c->XferSize = MAX_NBYTE_SIZE; - I2C_TransferConfig(hi2c, devaddress, (uint8_t)hi2c->XferSize, I2C_RELOAD_MODE, I2C_NO_STARTSTOP); - } - else - { - hi2c->XferSize = hi2c->XferCount; - if (hi2c->XferOptions != I2C_NO_OPTION_FRAME) - { - I2C_TransferConfig(hi2c, devaddress, (uint8_t)hi2c->XferSize, hi2c->XferOptions, I2C_NO_STARTSTOP); - } - else - { - I2C_TransferConfig(hi2c, devaddress, (uint8_t)hi2c->XferSize, I2C_AUTOEND_MODE, I2C_NO_STARTSTOP); - } - } - } - else - { - /* Call TxCpltCallback() if no stop mode is set */ - if (I2C_GET_STOP_MODE(hi2c) != I2C_AUTOEND_MODE) - { - /* Call I2C Master Sequential complete process */ - I2C_ITMasterSeqCplt(hi2c); - } - else - { - /* Wrong size Status regarding TCR flag event */ - /* Call the corresponding callback to inform upper layer of End of Transfer */ - I2C_ITError(hi2c, HAL_I2C_ERROR_SIZE); - } - } - } - else if ((I2C_CHECK_FLAG(tmpITFlags, I2C_FLAG_TC) != RESET) && (I2C_CHECK_IT_SOURCE(ITSources, I2C_IT_TCI) != RESET)) - { - if (hi2c->XferCount == 0U) - { - if (I2C_GET_STOP_MODE(hi2c) != I2C_AUTOEND_MODE) - { - /* Generate a stop condition in case of no transfer option */ - if (hi2c->XferOptions == I2C_NO_OPTION_FRAME) - { - /* Generate Stop */ - hi2c->Instance->CR2 |= I2C_CR2_STOP; - } - else - { - /* Call I2C Master Sequential complete process */ - I2C_ITMasterSeqCplt(hi2c); - } - } - } - else - { - /* Wrong size Status regarding TC flag event */ - /* Call the corresponding callback to inform upper layer of End of Transfer */ - I2C_ITError(hi2c, HAL_I2C_ERROR_SIZE); - } - } - else - { - /* Nothing to do */ - } - - if ((I2C_CHECK_FLAG(tmpITFlags, I2C_FLAG_STOPF) != RESET) && (I2C_CHECK_IT_SOURCE(ITSources, I2C_IT_STOPI) != RESET)) - { - /* Call I2C Master complete process */ - I2C_ITMasterCplt(hi2c, tmpITFlags); - } - - /* Process Unlocked */ - __HAL_UNLOCK(hi2c); - - return HAL_OK; -} - -/** - * @brief Interrupt Sub-Routine which handle the Interrupt Flags Slave Mode with Interrupt. - * @param hi2c Pointer to a I2C_HandleTypeDef structure that contains - * the configuration information for the specified I2C. - * @param ITFlags Interrupt flags to handle. - * @param ITSources Interrupt sources enabled. - * @retval HAL status - */ -static HAL_StatusTypeDef I2C_Slave_ISR_IT(struct __I2C_HandleTypeDef *hi2c, uint32_t ITFlags, uint32_t ITSources) -{ - uint32_t tmpoptions = hi2c->XferOptions; - uint32_t tmpITFlags = ITFlags; - - /* Process locked */ - __HAL_LOCK(hi2c); - - if ((I2C_CHECK_FLAG(tmpITFlags, I2C_FLAG_AF) != RESET) && (I2C_CHECK_IT_SOURCE(ITSources, I2C_IT_NACKI) != RESET)) - { - /* Check that I2C transfer finished */ - /* if yes, normal use case, a NACK is sent by the MASTER when Transfer is finished */ - /* Mean XferCount == 0*/ - /* So clear Flag NACKF only */ - if (hi2c->XferCount == 0U) - { - if ((hi2c->State == HAL_I2C_STATE_LISTEN) && (tmpoptions == I2C_FIRST_AND_LAST_FRAME)) /* Same action must be done for (tmpoptions == I2C_LAST_FRAME) which removed for Warning[Pa134]: left and right operands are identical */ - { - /* Call I2C Listen complete process */ - I2C_ITListenCplt(hi2c, tmpITFlags); - } - else if ((hi2c->State == HAL_I2C_STATE_BUSY_TX_LISTEN) && (tmpoptions != I2C_NO_OPTION_FRAME)) - { - /* Clear NACK Flag */ - __HAL_I2C_CLEAR_FLAG(hi2c, I2C_FLAG_AF); - - /* Flush TX register */ - I2C_Flush_TXDR(hi2c); - - /* Last Byte is Transmitted */ - /* Call I2C Slave Sequential complete process */ - I2C_ITSlaveSeqCplt(hi2c); - } - else - { - /* Clear NACK Flag */ - __HAL_I2C_CLEAR_FLAG(hi2c, I2C_FLAG_AF); - } - } - else - { - /* if no, error use case, a Non-Acknowledge of last Data is generated by the MASTER*/ - /* Clear NACK Flag */ - __HAL_I2C_CLEAR_FLAG(hi2c, I2C_FLAG_AF); - - /* Set ErrorCode corresponding to a Non-Acknowledge */ - hi2c->ErrorCode |= HAL_I2C_ERROR_AF; - - if ((tmpoptions == I2C_FIRST_FRAME) || (tmpoptions == I2C_NEXT_FRAME)) - { - /* Call the corresponding callback to inform upper layer of End of Transfer */ - I2C_ITError(hi2c, hi2c->ErrorCode); - } - } - } - else if ((I2C_CHECK_FLAG(tmpITFlags, I2C_FLAG_RXNE) != RESET) && (I2C_CHECK_IT_SOURCE(ITSources, I2C_IT_RXI) != RESET)) - { - if (hi2c->XferCount > 0U) - { - /* Remove RXNE flag on temporary variable as read done */ - tmpITFlags &= ~I2C_FLAG_RXNE; - - /* Read data from RXDR */ - *hi2c->pBuffPtr = (uint8_t)hi2c->Instance->RXDR; - - /* Increment Buffer pointer */ - hi2c->pBuffPtr++; - - hi2c->XferSize--; - hi2c->XferCount--; - } - - if ((hi2c->XferCount == 0U) && \ - (tmpoptions != I2C_NO_OPTION_FRAME)) - { - /* Call I2C Slave Sequential complete process */ - I2C_ITSlaveSeqCplt(hi2c); - } - } - else if ((I2C_CHECK_FLAG(tmpITFlags, I2C_FLAG_ADDR) != RESET) && (I2C_CHECK_IT_SOURCE(ITSources, I2C_IT_ADDRI) != RESET)) - { - I2C_ITAddrCplt(hi2c, tmpITFlags); - } - else if ((I2C_CHECK_FLAG(tmpITFlags, I2C_FLAG_TXIS) != RESET) && (I2C_CHECK_IT_SOURCE(ITSources, I2C_IT_TXI) != RESET)) - { - /* Write data to TXDR only if XferCount not reach "0" */ - /* A TXIS flag can be set, during STOP treatment */ - /* Check if all Datas have already been sent */ - /* If it is the case, this last write in TXDR is not sent, correspond to a dummy TXIS event */ - if (hi2c->XferCount > 0U) - { - /* Write data to TXDR */ - hi2c->Instance->TXDR = *hi2c->pBuffPtr; - - /* Increment Buffer pointer */ - hi2c->pBuffPtr++; - - hi2c->XferCount--; - hi2c->XferSize--; - } - else - { - if ((tmpoptions == I2C_NEXT_FRAME) || (tmpoptions == I2C_FIRST_FRAME)) - { - /* Last Byte is Transmitted */ - /* Call I2C Slave Sequential complete process */ - I2C_ITSlaveSeqCplt(hi2c); - } - } - } - else - { - /* Nothing to do */ - } - - /* Check if STOPF is set */ - if ((I2C_CHECK_FLAG(tmpITFlags, I2C_FLAG_STOPF) != RESET) && (I2C_CHECK_IT_SOURCE(ITSources, I2C_IT_STOPI) != RESET)) - { - /* Call I2C Slave complete process */ - I2C_ITSlaveCplt(hi2c, tmpITFlags); - } - - /* Process Unlocked */ - __HAL_UNLOCK(hi2c); - - return HAL_OK; -} - -/** - * @brief Interrupt Sub-Routine which handle the Interrupt Flags Master Mode with DMA. - * @param hi2c Pointer to a I2C_HandleTypeDef structure that contains - * the configuration information for the specified I2C. - * @param ITFlags Interrupt flags to handle. - * @param ITSources Interrupt sources enabled. - * @retval HAL status - */ -static HAL_StatusTypeDef I2C_Master_ISR_DMA(struct __I2C_HandleTypeDef *hi2c, uint32_t ITFlags, uint32_t ITSources) -{ - uint16_t devaddress; - uint32_t xfermode; - - /* Process Locked */ - __HAL_LOCK(hi2c); - - if ((I2C_CHECK_FLAG(ITFlags, I2C_FLAG_AF) != RESET) && (I2C_CHECK_IT_SOURCE(ITSources, I2C_IT_NACKI) != RESET)) - { - /* Clear NACK Flag */ - __HAL_I2C_CLEAR_FLAG(hi2c, I2C_FLAG_AF); - - /* Set corresponding Error Code */ - hi2c->ErrorCode |= HAL_I2C_ERROR_AF; - - /* No need to generate STOP, it is automatically done */ - /* But enable STOP interrupt, to treat it */ - /* Error callback will be send during stop flag treatment */ - I2C_Enable_IRQ(hi2c, I2C_XFER_CPLT_IT); - - /* Flush TX register */ - I2C_Flush_TXDR(hi2c); - } - else if ((I2C_CHECK_FLAG(ITFlags, I2C_FLAG_TCR) != RESET) && (I2C_CHECK_IT_SOURCE(ITSources, I2C_IT_TCI) != RESET)) - { - /* Disable TC interrupt */ - __HAL_I2C_DISABLE_IT(hi2c, I2C_IT_TCI); - - if (hi2c->XferCount != 0U) - { - /* Recover Slave address */ - devaddress = (uint16_t)(hi2c->Instance->CR2 & I2C_CR2_SADD); - - /* Prepare the new XferSize to transfer */ - if (hi2c->XferCount > MAX_NBYTE_SIZE) - { - hi2c->XferSize = MAX_NBYTE_SIZE; - xfermode = I2C_RELOAD_MODE; - } - else - { - hi2c->XferSize = hi2c->XferCount; - if (hi2c->XferOptions != I2C_NO_OPTION_FRAME) - { - xfermode = hi2c->XferOptions; - } - else - { - xfermode = I2C_AUTOEND_MODE; - } - } - - /* Set the new XferSize in Nbytes register */ - I2C_TransferConfig(hi2c, devaddress, (uint8_t)hi2c->XferSize, xfermode, I2C_NO_STARTSTOP); - - /* Update XferCount value */ - hi2c->XferCount -= hi2c->XferSize; - - /* Enable DMA Request */ - if (hi2c->State == HAL_I2C_STATE_BUSY_RX) - { - hi2c->Instance->CR1 |= I2C_CR1_RXDMAEN; - } - else - { - hi2c->Instance->CR1 |= I2C_CR1_TXDMAEN; - } - } - else - { - /* Call TxCpltCallback() if no stop mode is set */ - if (I2C_GET_STOP_MODE(hi2c) != I2C_AUTOEND_MODE) - { - /* Call I2C Master Sequential complete process */ - I2C_ITMasterSeqCplt(hi2c); - } - else - { - /* Wrong size Status regarding TCR flag event */ - /* Call the corresponding callback to inform upper layer of End of Transfer */ - I2C_ITError(hi2c, HAL_I2C_ERROR_SIZE); - } - } - } - else if ((I2C_CHECK_FLAG(ITFlags, I2C_FLAG_TC) != RESET) && (I2C_CHECK_IT_SOURCE(ITSources, I2C_IT_TCI) != RESET)) - { - if (hi2c->XferCount == 0U) - { - if (I2C_GET_STOP_MODE(hi2c) != I2C_AUTOEND_MODE) - { - /* Generate a stop condition in case of no transfer option */ - if (hi2c->XferOptions == I2C_NO_OPTION_FRAME) - { - /* Generate Stop */ - hi2c->Instance->CR2 |= I2C_CR2_STOP; - } - else - { - /* Call I2C Master Sequential complete process */ - I2C_ITMasterSeqCplt(hi2c); - } - } - } - else - { - /* Wrong size Status regarding TC flag event */ - /* Call the corresponding callback to inform upper layer of End of Transfer */ - I2C_ITError(hi2c, HAL_I2C_ERROR_SIZE); - } - } - else if ((I2C_CHECK_FLAG(ITFlags, I2C_FLAG_STOPF) != RESET) && (I2C_CHECK_IT_SOURCE(ITSources, I2C_IT_STOPI) != RESET)) - { - /* Call I2C Master complete process */ - I2C_ITMasterCplt(hi2c, ITFlags); - } - else - { - /* Nothing to do */ - } - - /* Process Unlocked */ - __HAL_UNLOCK(hi2c); - - return HAL_OK; -} - -/** - * @brief Interrupt Sub-Routine which handle the Interrupt Flags Slave Mode with DMA. - * @param hi2c Pointer to a I2C_HandleTypeDef structure that contains - * the configuration information for the specified I2C. - * @param ITFlags Interrupt flags to handle. - * @param ITSources Interrupt sources enabled. - * @retval HAL status - */ -static HAL_StatusTypeDef I2C_Slave_ISR_DMA(struct __I2C_HandleTypeDef *hi2c, uint32_t ITFlags, uint32_t ITSources) -{ - uint32_t tmpoptions = hi2c->XferOptions; - uint32_t treatdmanack = 0U; - - /* Process locked */ - __HAL_LOCK(hi2c); - - if ((I2C_CHECK_FLAG(ITFlags, I2C_FLAG_AF) != RESET) && (I2C_CHECK_IT_SOURCE(ITSources, I2C_IT_NACKI) != RESET)) - { - /* Check that I2C transfer finished */ - /* if yes, normal use case, a NACK is sent by the MASTER when Transfer is finished */ - /* Mean XferCount == 0 */ - /* So clear Flag NACKF only */ - if ((I2C_CHECK_IT_SOURCE(ITSources, I2C_CR1_TXDMAEN) != RESET) || - (I2C_CHECK_IT_SOURCE(ITSources, I2C_CR1_RXDMAEN) != RESET)) - { - /* Split check of hdmarx, for MISRA compliance */ - if (hi2c->hdmarx != NULL) - { - if (I2C_CHECK_IT_SOURCE(ITSources, I2C_CR1_RXDMAEN) != RESET) - { - if (__HAL_DMA_GET_COUNTER(hi2c->hdmarx) == 0U) - { - treatdmanack = 1U; - } - } - } - - /* Split check of hdmatx, for MISRA compliance */ - if (hi2c->hdmatx != NULL) - { - if (I2C_CHECK_IT_SOURCE(ITSources, I2C_CR1_TXDMAEN) != RESET) - { - if (__HAL_DMA_GET_COUNTER(hi2c->hdmatx) == 0U) - { - treatdmanack = 1U; - } - } - } - - if (treatdmanack == 1U) - { - if ((hi2c->State == HAL_I2C_STATE_LISTEN) && (tmpoptions == I2C_FIRST_AND_LAST_FRAME)) /* Same action must be done for (tmpoptions == I2C_LAST_FRAME) which removed for Warning[Pa134]: left and right operands are identical */ - { - /* Call I2C Listen complete process */ - I2C_ITListenCplt(hi2c, ITFlags); - } - else if ((hi2c->State == HAL_I2C_STATE_BUSY_TX_LISTEN) && (tmpoptions != I2C_NO_OPTION_FRAME)) - { - /* Clear NACK Flag */ - __HAL_I2C_CLEAR_FLAG(hi2c, I2C_FLAG_AF); - - /* Flush TX register */ - I2C_Flush_TXDR(hi2c); - - /* Last Byte is Transmitted */ - /* Call I2C Slave Sequential complete process */ - I2C_ITSlaveSeqCplt(hi2c); - } - else - { - /* Clear NACK Flag */ - __HAL_I2C_CLEAR_FLAG(hi2c, I2C_FLAG_AF); - } - } - else - { - /* if no, error use case, a Non-Acknowledge of last Data is generated by the MASTER*/ - /* Clear NACK Flag */ - __HAL_I2C_CLEAR_FLAG(hi2c, I2C_FLAG_AF); - - /* Set ErrorCode corresponding to a Non-Acknowledge */ - hi2c->ErrorCode |= HAL_I2C_ERROR_AF; - - if ((tmpoptions == I2C_FIRST_FRAME) || (tmpoptions == I2C_NEXT_FRAME)) - { - /* Call the corresponding callback to inform upper layer of End of Transfer */ - I2C_ITError(hi2c, hi2c->ErrorCode); - } - } - } - else - { - /* Only Clear NACK Flag, no DMA treatment is pending */ - __HAL_I2C_CLEAR_FLAG(hi2c, I2C_FLAG_AF); - } - } - else if ((I2C_CHECK_FLAG(ITFlags, I2C_FLAG_ADDR) != RESET) && (I2C_CHECK_IT_SOURCE(ITSources, I2C_IT_ADDRI) != RESET)) - { - I2C_ITAddrCplt(hi2c, ITFlags); - } - else if ((I2C_CHECK_FLAG(ITFlags, I2C_FLAG_STOPF) != RESET) && (I2C_CHECK_IT_SOURCE(ITSources, I2C_IT_STOPI) != RESET)) - { - /* Call I2C Slave complete process */ - I2C_ITSlaveCplt(hi2c, ITFlags); - } - else - { - /* Nothing to do */ - } - - /* Process Unlocked */ - __HAL_UNLOCK(hi2c); - - return HAL_OK; -} - -/** - * @brief Master sends target device address followed by internal memory address for write request. - * @param hi2c Pointer to a I2C_HandleTypeDef structure that contains - * the configuration information for the specified I2C. - * @param DevAddress Target device address: The device 7 bits address value - * in datasheet must be shifted to the left before calling the interface - * @param MemAddress Internal memory address - * @param MemAddSize Size of internal memory address - * @param Timeout Timeout duration - * @param Tickstart Tick start value - * @retval HAL status - */ -static HAL_StatusTypeDef I2C_RequestMemoryWrite(I2C_HandleTypeDef *hi2c, uint16_t DevAddress, uint16_t MemAddress, uint16_t MemAddSize, uint32_t Timeout, uint32_t Tickstart) -{ - I2C_TransferConfig(hi2c, DevAddress, (uint8_t)MemAddSize, I2C_RELOAD_MODE, I2C_GENERATE_START_WRITE); - - /* Wait until TXIS flag is set */ - if (I2C_WaitOnTXISFlagUntilTimeout(hi2c, Timeout, Tickstart) != HAL_OK) - { - return HAL_ERROR; - } - - /* If Memory address size is 8Bit */ - if (MemAddSize == I2C_MEMADD_SIZE_8BIT) - { - /* Send Memory Address */ - hi2c->Instance->TXDR = I2C_MEM_ADD_LSB(MemAddress); - } - /* If Memory address size is 16Bit */ - else - { - /* Send MSB of Memory Address */ - hi2c->Instance->TXDR = I2C_MEM_ADD_MSB(MemAddress); - - /* Wait until TXIS flag is set */ - if (I2C_WaitOnTXISFlagUntilTimeout(hi2c, Timeout, Tickstart) != HAL_OK) - { - return HAL_ERROR; - } - - /* Send LSB of Memory Address */ - hi2c->Instance->TXDR = I2C_MEM_ADD_LSB(MemAddress); - } - - /* Wait until TCR flag is set */ - if (I2C_WaitOnFlagUntilTimeout(hi2c, I2C_FLAG_TCR, RESET, Timeout, Tickstart) != HAL_OK) - { - return HAL_ERROR; - } - - return HAL_OK; -} - -/** - * @brief Master sends target device address followed by internal memory address for read request. - * @param hi2c Pointer to a I2C_HandleTypeDef structure that contains - * the configuration information for the specified I2C. - * @param DevAddress Target device address: The device 7 bits address value - * in datasheet must be shifted to the left before calling the interface - * @param MemAddress Internal memory address - * @param MemAddSize Size of internal memory address - * @param Timeout Timeout duration - * @param Tickstart Tick start value - * @retval HAL status - */ -static HAL_StatusTypeDef I2C_RequestMemoryRead(I2C_HandleTypeDef *hi2c, uint16_t DevAddress, uint16_t MemAddress, uint16_t MemAddSize, uint32_t Timeout, uint32_t Tickstart) -{ - I2C_TransferConfig(hi2c, DevAddress, (uint8_t)MemAddSize, I2C_SOFTEND_MODE, I2C_GENERATE_START_WRITE); - - /* Wait until TXIS flag is set */ - if (I2C_WaitOnTXISFlagUntilTimeout(hi2c, Timeout, Tickstart) != HAL_OK) - { - return HAL_ERROR; - } - - /* If Memory address size is 8Bit */ - if (MemAddSize == I2C_MEMADD_SIZE_8BIT) - { - /* Send Memory Address */ - hi2c->Instance->TXDR = I2C_MEM_ADD_LSB(MemAddress); - } - /* If Memory address size is 16Bit */ - else - { - /* Send MSB of Memory Address */ - hi2c->Instance->TXDR = I2C_MEM_ADD_MSB(MemAddress); - - /* Wait until TXIS flag is set */ - if (I2C_WaitOnTXISFlagUntilTimeout(hi2c, Timeout, Tickstart) != HAL_OK) - { - return HAL_ERROR; - } - - /* Send LSB of Memory Address */ - hi2c->Instance->TXDR = I2C_MEM_ADD_LSB(MemAddress); - } - - /* Wait until TC flag is set */ - if (I2C_WaitOnFlagUntilTimeout(hi2c, I2C_FLAG_TC, RESET, Timeout, Tickstart) != HAL_OK) - { - return HAL_ERROR; - } - - return HAL_OK; -} - -/** - * @brief I2C Address complete process callback. - * @param hi2c I2C handle. - * @param ITFlags Interrupt flags to handle. - * @retval None - */ -static void I2C_ITAddrCplt(I2C_HandleTypeDef *hi2c, uint32_t ITFlags) -{ - uint8_t transferdirection; - uint16_t slaveaddrcode; - uint16_t ownadd1code; - uint16_t ownadd2code; - - /* Prevent unused argument(s) compilation warning */ - UNUSED(ITFlags); - - /* In case of Listen state, need to inform upper layer of address match code event */ - if (((uint32_t)hi2c->State & (uint32_t)HAL_I2C_STATE_LISTEN) == (uint32_t)HAL_I2C_STATE_LISTEN) - { - transferdirection = I2C_GET_DIR(hi2c); - slaveaddrcode = I2C_GET_ADDR_MATCH(hi2c); - ownadd1code = I2C_GET_OWN_ADDRESS1(hi2c); - ownadd2code = I2C_GET_OWN_ADDRESS2(hi2c); - - /* If 10bits addressing mode is selected */ - if (hi2c->Init.AddressingMode == I2C_ADDRESSINGMODE_10BIT) - { - if ((slaveaddrcode & SlaveAddr_MSK) == ((ownadd1code >> SlaveAddr_SHIFT) & SlaveAddr_MSK)) - { - slaveaddrcode = ownadd1code; - hi2c->AddrEventCount++; - if (hi2c->AddrEventCount == 2U) - { - /* Reset Address Event counter */ - hi2c->AddrEventCount = 0U; - - /* Clear ADDR flag */ - __HAL_I2C_CLEAR_FLAG(hi2c, I2C_FLAG_ADDR); - - /* Process Unlocked */ - __HAL_UNLOCK(hi2c); - - /* Call Slave Addr callback */ -#if (USE_HAL_I2C_REGISTER_CALLBACKS == 1) - hi2c->AddrCallback(hi2c, transferdirection, slaveaddrcode); -#else - HAL_I2C_AddrCallback(hi2c, transferdirection, slaveaddrcode); -#endif /* USE_HAL_I2C_REGISTER_CALLBACKS */ - } - } - else - { - slaveaddrcode = ownadd2code; - - /* Disable ADDR Interrupts */ - I2C_Disable_IRQ(hi2c, I2C_XFER_LISTEN_IT); - - /* Process Unlocked */ - __HAL_UNLOCK(hi2c); - - /* Call Slave Addr callback */ -#if (USE_HAL_I2C_REGISTER_CALLBACKS == 1) - hi2c->AddrCallback(hi2c, transferdirection, slaveaddrcode); -#else - HAL_I2C_AddrCallback(hi2c, transferdirection, slaveaddrcode); -#endif /* USE_HAL_I2C_REGISTER_CALLBACKS */ - } - } - /* else 7 bits addressing mode is selected */ - else - { - /* Disable ADDR Interrupts */ - I2C_Disable_IRQ(hi2c, I2C_XFER_LISTEN_IT); - - /* Process Unlocked */ - __HAL_UNLOCK(hi2c); - - /* Call Slave Addr callback */ -#if (USE_HAL_I2C_REGISTER_CALLBACKS == 1) - hi2c->AddrCallback(hi2c, transferdirection, slaveaddrcode); -#else - HAL_I2C_AddrCallback(hi2c, transferdirection, slaveaddrcode); -#endif /* USE_HAL_I2C_REGISTER_CALLBACKS */ - } - } - /* Else clear address flag only */ - else - { - /* Clear ADDR flag */ - __HAL_I2C_CLEAR_FLAG(hi2c, I2C_FLAG_ADDR); - - /* Process Unlocked */ - __HAL_UNLOCK(hi2c); - } -} - -/** - * @brief I2C Master sequential complete process. - * @param hi2c I2C handle. - * @retval None - */ -static void I2C_ITMasterSeqCplt(I2C_HandleTypeDef *hi2c) -{ - /* Reset I2C handle mode */ - hi2c->Mode = HAL_I2C_MODE_NONE; - - /* No Generate Stop, to permit restart mode */ - /* The stop will be done at the end of transfer, when I2C_AUTOEND_MODE enable */ - if (hi2c->State == HAL_I2C_STATE_BUSY_TX) - { - hi2c->State = HAL_I2C_STATE_READY; - hi2c->PreviousState = I2C_STATE_MASTER_BUSY_TX; - hi2c->XferISR = NULL; - - /* Disable Interrupts */ - I2C_Disable_IRQ(hi2c, I2C_XFER_TX_IT); - - /* Process Unlocked */ - __HAL_UNLOCK(hi2c); - - /* Call the corresponding callback to inform upper layer of End of Transfer */ -#if (USE_HAL_I2C_REGISTER_CALLBACKS == 1) - hi2c->MasterTxCpltCallback(hi2c); -#else - HAL_I2C_MasterTxCpltCallback(hi2c); -#endif /* USE_HAL_I2C_REGISTER_CALLBACKS */ - } - /* hi2c->State == HAL_I2C_STATE_BUSY_RX */ - else - { - hi2c->State = HAL_I2C_STATE_READY; - hi2c->PreviousState = I2C_STATE_MASTER_BUSY_RX; - hi2c->XferISR = NULL; - - /* Disable Interrupts */ - I2C_Disable_IRQ(hi2c, I2C_XFER_RX_IT); - - /* Process Unlocked */ - __HAL_UNLOCK(hi2c); - - /* Call the corresponding callback to inform upper layer of End of Transfer */ -#if (USE_HAL_I2C_REGISTER_CALLBACKS == 1) - hi2c->MasterRxCpltCallback(hi2c); -#else - HAL_I2C_MasterRxCpltCallback(hi2c); -#endif /* USE_HAL_I2C_REGISTER_CALLBACKS */ - } -} - -/** - * @brief I2C Slave sequential complete process. - * @param hi2c I2C handle. - * @retval None - */ -static void I2C_ITSlaveSeqCplt(I2C_HandleTypeDef *hi2c) -{ - /* Reset I2C handle mode */ - hi2c->Mode = HAL_I2C_MODE_NONE; - - if (hi2c->State == HAL_I2C_STATE_BUSY_TX_LISTEN) - { - /* Remove HAL_I2C_STATE_SLAVE_BUSY_TX, keep only HAL_I2C_STATE_LISTEN */ - hi2c->State = HAL_I2C_STATE_LISTEN; - hi2c->PreviousState = I2C_STATE_SLAVE_BUSY_TX; - - /* Disable Interrupts */ - I2C_Disable_IRQ(hi2c, I2C_XFER_TX_IT); - - /* Process Unlocked */ - __HAL_UNLOCK(hi2c); - - /* Call the corresponding callback to inform upper layer of End of Transfer */ -#if (USE_HAL_I2C_REGISTER_CALLBACKS == 1) - hi2c->SlaveTxCpltCallback(hi2c); -#else - HAL_I2C_SlaveTxCpltCallback(hi2c); -#endif /* USE_HAL_I2C_REGISTER_CALLBACKS */ - } - - else if (hi2c->State == HAL_I2C_STATE_BUSY_RX_LISTEN) - { - /* Remove HAL_I2C_STATE_SLAVE_BUSY_RX, keep only HAL_I2C_STATE_LISTEN */ - hi2c->State = HAL_I2C_STATE_LISTEN; - hi2c->PreviousState = I2C_STATE_SLAVE_BUSY_RX; - - /* Disable Interrupts */ - I2C_Disable_IRQ(hi2c, I2C_XFER_RX_IT); - - /* Process Unlocked */ - __HAL_UNLOCK(hi2c); - - /* Call the corresponding callback to inform upper layer of End of Transfer */ -#if (USE_HAL_I2C_REGISTER_CALLBACKS == 1) - hi2c->SlaveRxCpltCallback(hi2c); -#else - HAL_I2C_SlaveRxCpltCallback(hi2c); -#endif /* USE_HAL_I2C_REGISTER_CALLBACKS */ - } - else - { - /* Nothing to do */ - } -} - -/** - * @brief I2C Master complete process. - * @param hi2c I2C handle. - * @param ITFlags Interrupt flags to handle. - * @retval None - */ -static void I2C_ITMasterCplt(I2C_HandleTypeDef *hi2c, uint32_t ITFlags) -{ - uint32_t tmperror; - - /* Clear STOP Flag */ - __HAL_I2C_CLEAR_FLAG(hi2c, I2C_FLAG_STOPF); - - /* Clear Configuration Register 2 */ - I2C_RESET_CR2(hi2c); - - /* Reset handle parameters */ - hi2c->PreviousState = I2C_STATE_NONE; - hi2c->XferISR = NULL; - hi2c->XferOptions = I2C_NO_OPTION_FRAME; - - if (I2C_CHECK_FLAG(ITFlags, I2C_FLAG_AF) != RESET) - { - /* Clear NACK Flag */ - __HAL_I2C_CLEAR_FLAG(hi2c, I2C_FLAG_AF); - - /* Set acknowledge error code */ - hi2c->ErrorCode |= HAL_I2C_ERROR_AF; - } - - /* Flush TX register */ - I2C_Flush_TXDR(hi2c); - - /* Disable Interrupts */ - I2C_Disable_IRQ(hi2c, I2C_XFER_TX_IT | I2C_XFER_RX_IT); - - /* Store current volatile hi2c->ErrorCode, misra rule */ - tmperror = hi2c->ErrorCode; - - /* Call the corresponding callback to inform upper layer of End of Transfer */ - if ((hi2c->State == HAL_I2C_STATE_ABORT) || (tmperror != HAL_I2C_ERROR_NONE)) - { - /* Call the corresponding callback to inform upper layer of End of Transfer */ - I2C_ITError(hi2c, hi2c->ErrorCode); - } - /* hi2c->State == HAL_I2C_STATE_BUSY_TX */ - else if (hi2c->State == HAL_I2C_STATE_BUSY_TX) - { - hi2c->State = HAL_I2C_STATE_READY; - - if (hi2c->Mode == HAL_I2C_MODE_MEM) - { - hi2c->Mode = HAL_I2C_MODE_NONE; - - /* Process Unlocked */ - __HAL_UNLOCK(hi2c); - - /* Call the corresponding callback to inform upper layer of End of Transfer */ -#if (USE_HAL_I2C_REGISTER_CALLBACKS == 1) - hi2c->MemTxCpltCallback(hi2c); -#else - HAL_I2C_MemTxCpltCallback(hi2c); -#endif /* USE_HAL_I2C_REGISTER_CALLBACKS */ - } - else - { - hi2c->Mode = HAL_I2C_MODE_NONE; - - /* Process Unlocked */ - __HAL_UNLOCK(hi2c); - - /* Call the corresponding callback to inform upper layer of End of Transfer */ -#if (USE_HAL_I2C_REGISTER_CALLBACKS == 1) - hi2c->MasterTxCpltCallback(hi2c); -#else - HAL_I2C_MasterTxCpltCallback(hi2c); -#endif /* USE_HAL_I2C_REGISTER_CALLBACKS */ - } - } - /* hi2c->State == HAL_I2C_STATE_BUSY_RX */ - else if (hi2c->State == HAL_I2C_STATE_BUSY_RX) - { - hi2c->State = HAL_I2C_STATE_READY; - - if (hi2c->Mode == HAL_I2C_MODE_MEM) - { - hi2c->Mode = HAL_I2C_MODE_NONE; - - /* Process Unlocked */ - __HAL_UNLOCK(hi2c); - - /* Call the corresponding callback to inform upper layer of End of Transfer */ -#if (USE_HAL_I2C_REGISTER_CALLBACKS == 1) - hi2c->MemRxCpltCallback(hi2c); -#else - HAL_I2C_MemRxCpltCallback(hi2c); -#endif /* USE_HAL_I2C_REGISTER_CALLBACKS */ - } - else - { - hi2c->Mode = HAL_I2C_MODE_NONE; - - /* Process Unlocked */ - __HAL_UNLOCK(hi2c); - - /* Call the corresponding callback to inform upper layer of End of Transfer */ -#if (USE_HAL_I2C_REGISTER_CALLBACKS == 1) - hi2c->MasterRxCpltCallback(hi2c); -#else - HAL_I2C_MasterRxCpltCallback(hi2c); -#endif /* USE_HAL_I2C_REGISTER_CALLBACKS */ - } - } - else - { - /* Nothing to do */ - } -} - -/** - * @brief I2C Slave complete process. - * @param hi2c I2C handle. - * @param ITFlags Interrupt flags to handle. - * @retval None - */ -static void I2C_ITSlaveCplt(I2C_HandleTypeDef *hi2c, uint32_t ITFlags) -{ - uint32_t tmpcr1value = READ_REG(hi2c->Instance->CR1); - uint32_t tmpITFlags = ITFlags; - - /* Clear STOP Flag */ - __HAL_I2C_CLEAR_FLAG(hi2c, I2C_FLAG_STOPF); - - /* Disable all interrupts */ - I2C_Disable_IRQ(hi2c, I2C_XFER_LISTEN_IT | I2C_XFER_TX_IT | I2C_XFER_RX_IT); - - /* Disable Address Acknowledge */ - hi2c->Instance->CR2 |= I2C_CR2_NACK; - - /* Clear Configuration Register 2 */ - I2C_RESET_CR2(hi2c); - - /* Flush TX register */ - I2C_Flush_TXDR(hi2c); - - /* If a DMA is ongoing, Update handle size context */ - if (I2C_CHECK_IT_SOURCE(tmpcr1value, I2C_CR1_TXDMAEN) != RESET) - { - if (hi2c->hdmatx != NULL) - { - hi2c->XferCount = (uint16_t)__HAL_DMA_GET_COUNTER(hi2c->hdmatx); - } - } - else if (I2C_CHECK_IT_SOURCE(tmpcr1value, I2C_CR1_RXDMAEN) != RESET) - { - if (hi2c->hdmarx != NULL) - { - hi2c->XferCount = (uint16_t)__HAL_DMA_GET_COUNTER(hi2c->hdmarx); - } - } - else - { - /* Do nothing */ - } - - /* Store Last receive data if any */ - if (I2C_CHECK_FLAG(tmpITFlags, I2C_FLAG_RXNE) != RESET) - { - /* Remove RXNE flag on temporary variable as read done */ - tmpITFlags &= ~I2C_FLAG_RXNE; - - /* Read data from RXDR */ - *hi2c->pBuffPtr = (uint8_t)hi2c->Instance->RXDR; - - /* Increment Buffer pointer */ - hi2c->pBuffPtr++; - - if ((hi2c->XferSize > 0U)) - { - hi2c->XferSize--; - hi2c->XferCount--; - } - } - - /* All data are not transferred, so set error code accordingly */ - if (hi2c->XferCount != 0U) - { - /* Set ErrorCode corresponding to a Non-Acknowledge */ - hi2c->ErrorCode |= HAL_I2C_ERROR_AF; - } - - hi2c->PreviousState = I2C_STATE_NONE; - hi2c->Mode = HAL_I2C_MODE_NONE; - hi2c->XferISR = NULL; - - if (hi2c->ErrorCode != HAL_I2C_ERROR_NONE) - { - /* Call the corresponding callback to inform upper layer of End of Transfer */ - I2C_ITError(hi2c, hi2c->ErrorCode); - - /* Call the Listen Complete callback, to inform upper layer of the end of Listen usecase */ - if (hi2c->State == HAL_I2C_STATE_LISTEN) - { - /* Call I2C Listen complete process */ - I2C_ITListenCplt(hi2c, tmpITFlags); - } - } - else if (hi2c->XferOptions != I2C_NO_OPTION_FRAME) - { - /* Call the Sequential Complete callback, to inform upper layer of the end of Tranfer */ - I2C_ITSlaveSeqCplt(hi2c); - - hi2c->XferOptions = I2C_NO_OPTION_FRAME; - hi2c->State = HAL_I2C_STATE_READY; - - /* Process Unlocked */ - __HAL_UNLOCK(hi2c); - - /* Call the Listen Complete callback, to inform upper layer of the end of Listen usecase */ -#if (USE_HAL_I2C_REGISTER_CALLBACKS == 1) - hi2c->ListenCpltCallback(hi2c); -#else - HAL_I2C_ListenCpltCallback(hi2c); -#endif /* USE_HAL_I2C_REGISTER_CALLBACKS */ - } - /* Call the corresponding callback to inform upper layer of End of Transfer */ - else if (hi2c->State == HAL_I2C_STATE_BUSY_RX) - { - hi2c->State = HAL_I2C_STATE_READY; - - /* Process Unlocked */ - __HAL_UNLOCK(hi2c); - - /* Call the corresponding callback to inform upper layer of End of Transfer */ -#if (USE_HAL_I2C_REGISTER_CALLBACKS == 1) - hi2c->SlaveRxCpltCallback(hi2c); -#else - HAL_I2C_SlaveRxCpltCallback(hi2c); -#endif /* USE_HAL_I2C_REGISTER_CALLBACKS */ - } - else - { - hi2c->State = HAL_I2C_STATE_READY; - - /* Process Unlocked */ - __HAL_UNLOCK(hi2c); - - /* Call the corresponding callback to inform upper layer of End of Transfer */ -#if (USE_HAL_I2C_REGISTER_CALLBACKS == 1) - hi2c->SlaveTxCpltCallback(hi2c); -#else - HAL_I2C_SlaveTxCpltCallback(hi2c); -#endif /* USE_HAL_I2C_REGISTER_CALLBACKS */ - } -} - -/** - * @brief I2C Listen complete process. - * @param hi2c I2C handle. - * @param ITFlags Interrupt flags to handle. - * @retval None - */ -static void I2C_ITListenCplt(I2C_HandleTypeDef *hi2c, uint32_t ITFlags) -{ - /* Reset handle parameters */ - hi2c->XferOptions = I2C_NO_OPTION_FRAME; - hi2c->PreviousState = I2C_STATE_NONE; - hi2c->State = HAL_I2C_STATE_READY; - hi2c->Mode = HAL_I2C_MODE_NONE; - hi2c->XferISR = NULL; - - /* Store Last receive data if any */ - if (I2C_CHECK_FLAG(ITFlags, I2C_FLAG_RXNE) != RESET) - { - /* Read data from RXDR */ - *hi2c->pBuffPtr = (uint8_t)hi2c->Instance->RXDR; - - /* Increment Buffer pointer */ - hi2c->pBuffPtr++; - - if ((hi2c->XferSize > 0U)) - { - hi2c->XferSize--; - hi2c->XferCount--; - - /* Set ErrorCode corresponding to a Non-Acknowledge */ - hi2c->ErrorCode |= HAL_I2C_ERROR_AF; - } - } - - /* Disable all Interrupts*/ - I2C_Disable_IRQ(hi2c, I2C_XFER_LISTEN_IT | I2C_XFER_RX_IT | I2C_XFER_TX_IT); - - /* Clear NACK Flag */ - __HAL_I2C_CLEAR_FLAG(hi2c, I2C_FLAG_AF); - - /* Process Unlocked */ - __HAL_UNLOCK(hi2c); - - /* Call the Listen Complete callback, to inform upper layer of the end of Listen usecase */ -#if (USE_HAL_I2C_REGISTER_CALLBACKS == 1) - hi2c->ListenCpltCallback(hi2c); -#else - HAL_I2C_ListenCpltCallback(hi2c); -#endif /* USE_HAL_I2C_REGISTER_CALLBACKS */ -} - -/** - * @brief I2C interrupts error process. - * @param hi2c I2C handle. - * @param ErrorCode Error code to handle. - * @retval None - */ -static void I2C_ITError(I2C_HandleTypeDef *hi2c, uint32_t ErrorCode) -{ - HAL_I2C_StateTypeDef tmpstate = hi2c->State; - - /* Reset handle parameters */ - hi2c->Mode = HAL_I2C_MODE_NONE; - hi2c->XferOptions = I2C_NO_OPTION_FRAME; - hi2c->XferCount = 0U; - - /* Set new error code */ - hi2c->ErrorCode |= ErrorCode; - - /* Disable Interrupts */ - if ((tmpstate == HAL_I2C_STATE_LISTEN) || - (tmpstate == HAL_I2C_STATE_BUSY_TX_LISTEN) || - (tmpstate == HAL_I2C_STATE_BUSY_RX_LISTEN)) - { - /* Disable all interrupts, except interrupts related to LISTEN state */ - I2C_Disable_IRQ(hi2c, I2C_XFER_RX_IT | I2C_XFER_TX_IT); - - /* keep HAL_I2C_STATE_LISTEN if set */ - hi2c->State = HAL_I2C_STATE_LISTEN; - hi2c->PreviousState = I2C_STATE_NONE; - hi2c->XferISR = I2C_Slave_ISR_IT; - } - else - { - /* Disable all interrupts */ - I2C_Disable_IRQ(hi2c, I2C_XFER_LISTEN_IT | I2C_XFER_RX_IT | I2C_XFER_TX_IT); - - /* If state is an abort treatment on goind, don't change state */ - /* This change will be do later */ - if (hi2c->State != HAL_I2C_STATE_ABORT) - { - /* Set HAL_I2C_STATE_READY */ - hi2c->State = HAL_I2C_STATE_READY; - } - hi2c->PreviousState = I2C_STATE_NONE; - hi2c->XferISR = NULL; - } - - /* Abort DMA TX transfer if any */ - if ((hi2c->Instance->CR1 & I2C_CR1_TXDMAEN) == I2C_CR1_TXDMAEN) - { - hi2c->Instance->CR1 &= ~I2C_CR1_TXDMAEN; - - if (hi2c->hdmatx != NULL) - { - /* Set the I2C DMA Abort callback : - will lead to call HAL_I2C_ErrorCallback() at end of DMA abort procedure */ - hi2c->hdmatx->XferAbortCallback = I2C_DMAAbort; - - /* Process Unlocked */ - __HAL_UNLOCK(hi2c); - - /* Abort DMA TX */ - if (HAL_DMA_Abort_IT(hi2c->hdmatx) != HAL_OK) - { - /* Call Directly XferAbortCallback function in case of error */ - hi2c->hdmatx->XferAbortCallback(hi2c->hdmatx); - } - } - } - /* Abort DMA RX transfer if any */ - else if ((hi2c->Instance->CR1 & I2C_CR1_RXDMAEN) == I2C_CR1_RXDMAEN) - { - hi2c->Instance->CR1 &= ~I2C_CR1_RXDMAEN; - - if (hi2c->hdmarx != NULL) - { - /* Set the I2C DMA Abort callback : - will lead to call HAL_I2C_ErrorCallback() at end of DMA abort procedure */ - hi2c->hdmarx->XferAbortCallback = I2C_DMAAbort; - - /* Process Unlocked */ - __HAL_UNLOCK(hi2c); - - /* Abort DMA RX */ - if (HAL_DMA_Abort_IT(hi2c->hdmarx) != HAL_OK) - { - /* Call Directly hi2c->hdmarx->XferAbortCallback function in case of error */ - hi2c->hdmarx->XferAbortCallback(hi2c->hdmarx); - } - } - } - else if (hi2c->State == HAL_I2C_STATE_ABORT) - { - hi2c->State = HAL_I2C_STATE_READY; - - /* Process Unlocked */ - __HAL_UNLOCK(hi2c); - - /* Call the corresponding callback to inform upper layer of End of Transfer */ -#if (USE_HAL_I2C_REGISTER_CALLBACKS == 1) - hi2c->AbortCpltCallback(hi2c); -#else - HAL_I2C_AbortCpltCallback(hi2c); -#endif /* USE_HAL_I2C_REGISTER_CALLBACKS */ - } - else - { - /* Process Unlocked */ - __HAL_UNLOCK(hi2c); - - /* Call the corresponding callback to inform upper layer of End of Transfer */ -#if (USE_HAL_I2C_REGISTER_CALLBACKS == 1) - hi2c->ErrorCallback(hi2c); -#else - HAL_I2C_ErrorCallback(hi2c); -#endif /* USE_HAL_I2C_REGISTER_CALLBACKS */ - } -} - -/** - * @brief I2C Tx data register flush process. - * @param hi2c I2C handle. - * @retval None - */ -static void I2C_Flush_TXDR(I2C_HandleTypeDef *hi2c) -{ - /* If a pending TXIS flag is set */ - /* Write a dummy data in TXDR to clear it */ - if (__HAL_I2C_GET_FLAG(hi2c, I2C_FLAG_TXIS) != RESET) - { - hi2c->Instance->TXDR = 0x00U; - } - - /* Flush TX register if not empty */ - if (__HAL_I2C_GET_FLAG(hi2c, I2C_FLAG_TXE) == RESET) - { - __HAL_I2C_CLEAR_FLAG(hi2c, I2C_FLAG_TXE); - } -} - -/** - * @brief DMA I2C master transmit process complete callback. - * @param hdma DMA handle - * @retval None - */ -static void I2C_DMAMasterTransmitCplt(DMA_HandleTypeDef *hdma) -{ - I2C_HandleTypeDef *hi2c = (I2C_HandleTypeDef *)(((DMA_HandleTypeDef *)hdma)->Parent); /* Derogation MISRAC2012-Rule-11.5 */ - - /* Disable DMA Request */ - hi2c->Instance->CR1 &= ~I2C_CR1_TXDMAEN; - - /* If last transfer, enable STOP interrupt */ - if (hi2c->XferCount == 0U) - { - /* Enable STOP interrupt */ - I2C_Enable_IRQ(hi2c, I2C_XFER_CPLT_IT); - } - /* else prepare a new DMA transfer and enable TCReload interrupt */ - else - { - /* Update Buffer pointer */ - hi2c->pBuffPtr += hi2c->XferSize; - - /* Set the XferSize to transfer */ - if (hi2c->XferCount > MAX_NBYTE_SIZE) - { - hi2c->XferSize = MAX_NBYTE_SIZE; - } - else - { - hi2c->XferSize = hi2c->XferCount; - } - - /* Enable the DMA stream */ - if (HAL_DMA_Start_IT(hi2c->hdmatx, (uint32_t)hi2c->pBuffPtr, (uint32_t)&hi2c->Instance->TXDR, hi2c->XferSize) != HAL_OK) - { - /* Call the corresponding callback to inform upper layer of End of Transfer */ - I2C_ITError(hi2c, HAL_I2C_ERROR_DMA); - } - else - { - /* Enable TC interrupts */ - I2C_Enable_IRQ(hi2c, I2C_XFER_RELOAD_IT); - } - } -} - -/** - * @brief DMA I2C slave transmit process complete callback. - * @param hdma DMA handle - * @retval None - */ -static void I2C_DMASlaveTransmitCplt(DMA_HandleTypeDef *hdma) -{ - I2C_HandleTypeDef *hi2c = (I2C_HandleTypeDef *)(((DMA_HandleTypeDef *)hdma)->Parent); /* Derogation MISRAC2012-Rule-11.5 */ - uint32_t tmpoptions = hi2c->XferOptions; - - if ((tmpoptions == I2C_NEXT_FRAME) || (tmpoptions == I2C_FIRST_FRAME)) - { - /* Disable DMA Request */ - hi2c->Instance->CR1 &= ~I2C_CR1_TXDMAEN; - - /* Last Byte is Transmitted */ - /* Call I2C Slave Sequential complete process */ - I2C_ITSlaveSeqCplt(hi2c); - } - else - { - /* No specific action, Master fully manage the generation of STOP condition */ - /* Mean that this generation can arrive at any time, at the end or during DMA process */ - /* So STOP condition should be manage through Interrupt treatment */ - } -} - -/** - * @brief DMA I2C master receive process complete callback. - * @param hdma DMA handle - * @retval None - */ -static void I2C_DMAMasterReceiveCplt(DMA_HandleTypeDef *hdma) -{ - I2C_HandleTypeDef *hi2c = (I2C_HandleTypeDef *)(((DMA_HandleTypeDef *)hdma)->Parent); /* Derogation MISRAC2012-Rule-11.5 */ - - /* Disable DMA Request */ - hi2c->Instance->CR1 &= ~I2C_CR1_RXDMAEN; - - /* If last transfer, enable STOP interrupt */ - if (hi2c->XferCount == 0U) - { - /* Enable STOP interrupt */ - I2C_Enable_IRQ(hi2c, I2C_XFER_CPLT_IT); - } - /* else prepare a new DMA transfer and enable TCReload interrupt */ - else - { - /* Update Buffer pointer */ - hi2c->pBuffPtr += hi2c->XferSize; - - /* Set the XferSize to transfer */ - if (hi2c->XferCount > MAX_NBYTE_SIZE) - { - hi2c->XferSize = MAX_NBYTE_SIZE; - } - else - { - hi2c->XferSize = hi2c->XferCount; - } - - /* Enable the DMA stream */ - if (HAL_DMA_Start_IT(hi2c->hdmarx, (uint32_t)&hi2c->Instance->RXDR, (uint32_t)hi2c->pBuffPtr, hi2c->XferSize) != HAL_OK) - { - /* Call the corresponding callback to inform upper layer of End of Transfer */ - I2C_ITError(hi2c, HAL_I2C_ERROR_DMA); - } - else - { - /* Enable TC interrupts */ - I2C_Enable_IRQ(hi2c, I2C_XFER_RELOAD_IT); - } - } -} - -/** - * @brief DMA I2C slave receive process complete callback. - * @param hdma DMA handle - * @retval None - */ -static void I2C_DMASlaveReceiveCplt(DMA_HandleTypeDef *hdma) -{ - I2C_HandleTypeDef *hi2c = (I2C_HandleTypeDef *)(((DMA_HandleTypeDef *)hdma)->Parent); /* Derogation MISRAC2012-Rule-11.5 */ - uint32_t tmpoptions = hi2c->XferOptions; - - if ((__HAL_DMA_GET_COUNTER(hi2c->hdmarx) == 0U) && \ - (tmpoptions != I2C_NO_OPTION_FRAME)) - { - /* Disable DMA Request */ - hi2c->Instance->CR1 &= ~I2C_CR1_RXDMAEN; - - /* Call I2C Slave Sequential complete process */ - I2C_ITSlaveSeqCplt(hi2c); - } - else - { - /* No specific action, Master fully manage the generation of STOP condition */ - /* Mean that this generation can arrive at any time, at the end or during DMA process */ - /* So STOP condition should be manage through Interrupt treatment */ - } -} - -/** - * @brief DMA I2C communication error callback. - * @param hdma DMA handle - * @retval None - */ -static void I2C_DMAError(DMA_HandleTypeDef *hdma) -{ - uint32_t treatdmaerror = 0U; - I2C_HandleTypeDef *hi2c = (I2C_HandleTypeDef *)(((DMA_HandleTypeDef *)hdma)->Parent); /* Derogation MISRAC2012-Rule-11.5 */ - - if (hi2c->hdmatx != NULL) - { - if (__HAL_DMA_GET_COUNTER(hi2c->hdmatx) == 0U) - { - treatdmaerror = 1U; - } - } - - if (hi2c->hdmarx != NULL) - { - if (__HAL_DMA_GET_COUNTER(hi2c->hdmarx) == 0U) - { - treatdmaerror = 1U; - } - } - - /* Check if a FIFO error is detected, if true normal use case, so no specific action to perform */ - if (!((HAL_DMA_GetError(hdma) == HAL_DMA_ERROR_FE)) && (treatdmaerror != 0U)) - { - /* Disable Acknowledge */ - hi2c->Instance->CR2 |= I2C_CR2_NACK; - - /* Call the corresponding callback to inform upper layer of End of Transfer */ - I2C_ITError(hi2c, HAL_I2C_ERROR_DMA); - } -} - -/** - * @brief DMA I2C communication abort callback - * (To be called at end of DMA Abort procedure). - * @param hdma DMA handle. - * @retval None - */ -static void I2C_DMAAbort(DMA_HandleTypeDef *hdma) -{ - I2C_HandleTypeDef *hi2c = (I2C_HandleTypeDef *)(((DMA_HandleTypeDef *)hdma)->Parent); /* Derogation MISRAC2012-Rule-11.5 */ - - /* Reset AbortCpltCallback */ - hi2c->hdmatx->XferAbortCallback = NULL; - hi2c->hdmarx->XferAbortCallback = NULL; - - /* Check if come from abort from user */ - if (hi2c->State == HAL_I2C_STATE_ABORT) - { - hi2c->State = HAL_I2C_STATE_READY; - - /* Call the corresponding callback to inform upper layer of End of Transfer */ -#if (USE_HAL_I2C_REGISTER_CALLBACKS == 1) - hi2c->AbortCpltCallback(hi2c); -#else - HAL_I2C_AbortCpltCallback(hi2c); -#endif /* USE_HAL_I2C_REGISTER_CALLBACKS */ - } - else - { - /* Call the corresponding callback to inform upper layer of End of Transfer */ -#if (USE_HAL_I2C_REGISTER_CALLBACKS == 1) - hi2c->ErrorCallback(hi2c); -#else - HAL_I2C_ErrorCallback(hi2c); -#endif /* USE_HAL_I2C_REGISTER_CALLBACKS */ - } -} - -/** - * @brief This function handles I2C Communication Timeout. - * @param hi2c Pointer to a I2C_HandleTypeDef structure that contains - * the configuration information for the specified I2C. - * @param Flag Specifies the I2C flag to check. - * @param Status The new Flag status (SET or RESET). - * @param Timeout Timeout duration - * @param Tickstart Tick start value - * @retval HAL status - */ -static HAL_StatusTypeDef I2C_WaitOnFlagUntilTimeout(I2C_HandleTypeDef *hi2c, uint32_t Flag, FlagStatus Status, uint32_t Timeout, uint32_t Tickstart) -{ - while (__HAL_I2C_GET_FLAG(hi2c, Flag) == Status) - { - /* Check for the Timeout */ - if (Timeout != HAL_MAX_DELAY) - { - if (((HAL_GetTick() - Tickstart) > Timeout) || (Timeout == 0U)) - { - hi2c->ErrorCode |= HAL_I2C_ERROR_TIMEOUT; - hi2c->State = HAL_I2C_STATE_READY; - hi2c->Mode = HAL_I2C_MODE_NONE; - - /* Process Unlocked */ - __HAL_UNLOCK(hi2c); - return HAL_ERROR; - } - } - } - return HAL_OK; -} - -/** - * @brief This function handles I2C Communication Timeout for specific usage of TXIS flag. - * @param hi2c Pointer to a I2C_HandleTypeDef structure that contains - * the configuration information for the specified I2C. - * @param Timeout Timeout duration - * @param Tickstart Tick start value - * @retval HAL status - */ -static HAL_StatusTypeDef I2C_WaitOnTXISFlagUntilTimeout(I2C_HandleTypeDef *hi2c, uint32_t Timeout, uint32_t Tickstart) -{ - while (__HAL_I2C_GET_FLAG(hi2c, I2C_FLAG_TXIS) == RESET) - { - /* Check if a NACK is detected */ - if (I2C_IsAcknowledgeFailed(hi2c, Timeout, Tickstart) != HAL_OK) - { - return HAL_ERROR; - } - - /* Check for the Timeout */ - if (Timeout != HAL_MAX_DELAY) - { - if (((HAL_GetTick() - Tickstart) > Timeout) || (Timeout == 0U)) - { - hi2c->ErrorCode |= HAL_I2C_ERROR_TIMEOUT; - hi2c->State = HAL_I2C_STATE_READY; - hi2c->Mode = HAL_I2C_MODE_NONE; - - /* Process Unlocked */ - __HAL_UNLOCK(hi2c); - - return HAL_ERROR; - } - } - } - return HAL_OK; -} - -/** - * @brief This function handles I2C Communication Timeout for specific usage of STOP flag. - * @param hi2c Pointer to a I2C_HandleTypeDef structure that contains - * the configuration information for the specified I2C. - * @param Timeout Timeout duration - * @param Tickstart Tick start value - * @retval HAL status - */ -static HAL_StatusTypeDef I2C_WaitOnSTOPFlagUntilTimeout(I2C_HandleTypeDef *hi2c, uint32_t Timeout, uint32_t Tickstart) -{ - while (__HAL_I2C_GET_FLAG(hi2c, I2C_FLAG_STOPF) == RESET) - { - /* Check if a NACK is detected */ - if (I2C_IsAcknowledgeFailed(hi2c, Timeout, Tickstart) != HAL_OK) - { - return HAL_ERROR; - } - - /* Check for the Timeout */ - if (((HAL_GetTick() - Tickstart) > Timeout) || (Timeout == 0U)) - { - hi2c->ErrorCode |= HAL_I2C_ERROR_TIMEOUT; - hi2c->State = HAL_I2C_STATE_READY; - hi2c->Mode = HAL_I2C_MODE_NONE; - - /* Process Unlocked */ - __HAL_UNLOCK(hi2c); - - return HAL_ERROR; - } - } - return HAL_OK; -} - -/** - * @brief This function handles I2C Communication Timeout for specific usage of RXNE flag. - * @param hi2c Pointer to a I2C_HandleTypeDef structure that contains - * the configuration information for the specified I2C. - * @param Timeout Timeout duration - * @param Tickstart Tick start value - * @retval HAL status - */ -static HAL_StatusTypeDef I2C_WaitOnRXNEFlagUntilTimeout(I2C_HandleTypeDef *hi2c, uint32_t Timeout, uint32_t Tickstart) -{ - while (__HAL_I2C_GET_FLAG(hi2c, I2C_FLAG_RXNE) == RESET) - { - /* Check if a NACK is detected */ - if (I2C_IsAcknowledgeFailed(hi2c, Timeout, Tickstart) != HAL_OK) - { - return HAL_ERROR; - } - - /* Check if a STOPF is detected */ - if (__HAL_I2C_GET_FLAG(hi2c, I2C_FLAG_STOPF) == SET) - { - /* Check if an RXNE is pending */ - /* Store Last receive data if any */ - if ((__HAL_I2C_GET_FLAG(hi2c, I2C_FLAG_RXNE) == SET) && (hi2c->XferSize > 0U)) - { - /* Return HAL_OK */ - /* The Reading of data from RXDR will be done in caller function */ - return HAL_OK; - } - else - { - /* Clear STOP Flag */ - __HAL_I2C_CLEAR_FLAG(hi2c, I2C_FLAG_STOPF); - - /* Clear Configuration Register 2 */ - I2C_RESET_CR2(hi2c); - - hi2c->ErrorCode = HAL_I2C_ERROR_NONE; - hi2c->State = HAL_I2C_STATE_READY; - hi2c->Mode = HAL_I2C_MODE_NONE; - - /* Process Unlocked */ - __HAL_UNLOCK(hi2c); - - return HAL_ERROR; - } - } - - /* Check for the Timeout */ - if (((HAL_GetTick() - Tickstart) > Timeout) || (Timeout == 0U)) - { - hi2c->ErrorCode |= HAL_I2C_ERROR_TIMEOUT; - hi2c->State = HAL_I2C_STATE_READY; - - /* Process Unlocked */ - __HAL_UNLOCK(hi2c); - - return HAL_ERROR; - } - } - return HAL_OK; -} - -/** - * @brief This function handles Acknowledge failed detection during an I2C Communication. - * @param hi2c Pointer to a I2C_HandleTypeDef structure that contains - * the configuration information for the specified I2C. - * @param Timeout Timeout duration - * @param Tickstart Tick start value - * @retval HAL status - */ -static HAL_StatusTypeDef I2C_IsAcknowledgeFailed(I2C_HandleTypeDef *hi2c, uint32_t Timeout, uint32_t Tickstart) -{ - if (__HAL_I2C_GET_FLAG(hi2c, I2C_FLAG_AF) == SET) - { - /* Wait until STOP Flag is reset */ - /* AutoEnd should be initiate after AF */ - while (__HAL_I2C_GET_FLAG(hi2c, I2C_FLAG_STOPF) == RESET) - { - /* Check for the Timeout */ - if (Timeout != HAL_MAX_DELAY) - { - if (((HAL_GetTick() - Tickstart) > Timeout) || (Timeout == 0U)) - { - hi2c->ErrorCode |= HAL_I2C_ERROR_TIMEOUT; - hi2c->State = HAL_I2C_STATE_READY; - hi2c->Mode = HAL_I2C_MODE_NONE; - - /* Process Unlocked */ - __HAL_UNLOCK(hi2c); - - return HAL_ERROR; - } - } - } - - /* Clear NACKF Flag */ - __HAL_I2C_CLEAR_FLAG(hi2c, I2C_FLAG_AF); - - /* Clear STOP Flag */ - __HAL_I2C_CLEAR_FLAG(hi2c, I2C_FLAG_STOPF); - - /* Flush TX register */ - I2C_Flush_TXDR(hi2c); - - /* Clear Configuration Register 2 */ - I2C_RESET_CR2(hi2c); - - hi2c->ErrorCode |= HAL_I2C_ERROR_AF; - hi2c->State = HAL_I2C_STATE_READY; - hi2c->Mode = HAL_I2C_MODE_NONE; - - /* Process Unlocked */ - __HAL_UNLOCK(hi2c); - - return HAL_ERROR; - } - return HAL_OK; -} - -/** - * @brief Handles I2Cx communication when starting transfer or during transfer (TC or TCR flag are set). - * @param hi2c I2C handle. - * @param DevAddress Specifies the slave address to be programmed. - * @param Size Specifies the number of bytes to be programmed. - * This parameter must be a value between 0 and 255. - * @param Mode New state of the I2C START condition generation. - * This parameter can be one of the following values: - * @arg @ref I2C_RELOAD_MODE Enable Reload mode . - * @arg @ref I2C_AUTOEND_MODE Enable Automatic end mode. - * @arg @ref I2C_SOFTEND_MODE Enable Software end mode. - * @param Request New state of the I2C START condition generation. - * This parameter can be one of the following values: - * @arg @ref I2C_NO_STARTSTOP Don't Generate stop and start condition. - * @arg @ref I2C_GENERATE_STOP Generate stop condition (Size should be set to 0). - * @arg @ref I2C_GENERATE_START_READ Generate Restart for read request. - * @arg @ref I2C_GENERATE_START_WRITE Generate Restart for write request. - * @retval None - */ -static void I2C_TransferConfig(I2C_HandleTypeDef *hi2c, uint16_t DevAddress, uint8_t Size, uint32_t Mode, uint32_t Request) -{ - /* Check the parameters */ - assert_param(IS_I2C_ALL_INSTANCE(hi2c->Instance)); - assert_param(IS_TRANSFER_MODE(Mode)); - assert_param(IS_TRANSFER_REQUEST(Request)); - - /* update CR2 register */ - MODIFY_REG(hi2c->Instance->CR2, ((I2C_CR2_SADD | I2C_CR2_NBYTES | I2C_CR2_RELOAD | I2C_CR2_AUTOEND | (I2C_CR2_RD_WRN & (uint32_t)(Request >> (31U - I2C_CR2_RD_WRN_Pos))) | I2C_CR2_START | I2C_CR2_STOP)), \ - (uint32_t)(((uint32_t)DevAddress & I2C_CR2_SADD) | (((uint32_t)Size << I2C_CR2_NBYTES_Pos) & I2C_CR2_NBYTES) | (uint32_t)Mode | (uint32_t)Request)); -} - -/** - * @brief Manage the enabling of Interrupts. - * @param hi2c Pointer to a I2C_HandleTypeDef structure that contains - * the configuration information for the specified I2C. - * @param InterruptRequest Value of @ref I2C_Interrupt_configuration_definition. - * @retval None - */ -static void I2C_Enable_IRQ(I2C_HandleTypeDef *hi2c, uint16_t InterruptRequest) -{ - uint32_t tmpisr = 0U; - - if ((hi2c->XferISR == I2C_Master_ISR_DMA) || \ - (hi2c->XferISR == I2C_Slave_ISR_DMA)) - { - if ((InterruptRequest & I2C_XFER_LISTEN_IT) == I2C_XFER_LISTEN_IT) - { - /* Enable ERR, STOP, NACK and ADDR interrupts */ - tmpisr |= I2C_IT_ADDRI | I2C_IT_STOPI | I2C_IT_NACKI | I2C_IT_ERRI; - } - - if ((InterruptRequest & I2C_XFER_ERROR_IT) == I2C_XFER_ERROR_IT) - { - /* Enable ERR and NACK interrupts */ - tmpisr |= I2C_IT_ERRI | I2C_IT_NACKI; - } - - if ((InterruptRequest & I2C_XFER_CPLT_IT) == I2C_XFER_CPLT_IT) - { - /* Enable STOP interrupts */ - tmpisr |= I2C_IT_STOPI; - } - - if ((InterruptRequest & I2C_XFER_RELOAD_IT) == I2C_XFER_RELOAD_IT) - { - /* Enable TC interrupts */ - tmpisr |= I2C_IT_TCI; - } - } - else - { - if ((InterruptRequest & I2C_XFER_LISTEN_IT) == I2C_XFER_LISTEN_IT) - { - /* Enable ERR, STOP, NACK, and ADDR interrupts */ - tmpisr |= I2C_IT_ADDRI | I2C_IT_STOPI | I2C_IT_NACKI | I2C_IT_ERRI; - } - - if ((InterruptRequest & I2C_XFER_TX_IT) == I2C_XFER_TX_IT) - { - /* Enable ERR, TC, STOP, NACK and RXI interrupts */ - tmpisr |= I2C_IT_ERRI | I2C_IT_TCI | I2C_IT_STOPI | I2C_IT_NACKI | I2C_IT_TXI; - } - - if ((InterruptRequest & I2C_XFER_RX_IT) == I2C_XFER_RX_IT) - { - /* Enable ERR, TC, STOP, NACK and TXI interrupts */ - tmpisr |= I2C_IT_ERRI | I2C_IT_TCI | I2C_IT_STOPI | I2C_IT_NACKI | I2C_IT_RXI; - } - - if ((InterruptRequest & I2C_XFER_CPLT_IT) == I2C_XFER_CPLT_IT) - { - /* Enable STOP interrupts */ - tmpisr |= I2C_IT_STOPI; - } - } - - /* Enable interrupts only at the end */ - /* to avoid the risk of I2C interrupt handle execution before */ - /* all interrupts requested done */ - __HAL_I2C_ENABLE_IT(hi2c, tmpisr); -} - -/** - * @brief Manage the disabling of Interrupts. - * @param hi2c Pointer to a I2C_HandleTypeDef structure that contains - * the configuration information for the specified I2C. - * @param InterruptRequest Value of @ref I2C_Interrupt_configuration_definition. - * @retval None - */ -static void I2C_Disable_IRQ(I2C_HandleTypeDef *hi2c, uint16_t InterruptRequest) -{ - uint32_t tmpisr = 0U; - - if ((InterruptRequest & I2C_XFER_TX_IT) == I2C_XFER_TX_IT) - { - /* Disable TC and TXI interrupts */ - tmpisr |= I2C_IT_TCI | I2C_IT_TXI; - - if (((uint32_t)hi2c->State & (uint32_t)HAL_I2C_STATE_LISTEN) != (uint32_t)HAL_I2C_STATE_LISTEN) - { - /* Disable NACK and STOP interrupts */ - tmpisr |= I2C_IT_STOPI | I2C_IT_NACKI | I2C_IT_ERRI; - } - } - - if ((InterruptRequest & I2C_XFER_RX_IT) == I2C_XFER_RX_IT) - { - /* Disable TC and RXI interrupts */ - tmpisr |= I2C_IT_TCI | I2C_IT_RXI; - - if (((uint32_t)hi2c->State & (uint32_t)HAL_I2C_STATE_LISTEN) != (uint32_t)HAL_I2C_STATE_LISTEN) - { - /* Disable NACK and STOP interrupts */ - tmpisr |= I2C_IT_STOPI | I2C_IT_NACKI | I2C_IT_ERRI; - } - } - - if ((InterruptRequest & I2C_XFER_LISTEN_IT) == I2C_XFER_LISTEN_IT) - { - /* Disable ADDR, NACK and STOP interrupts */ - tmpisr |= I2C_IT_ADDRI | I2C_IT_STOPI | I2C_IT_NACKI | I2C_IT_ERRI; - } - - if ((InterruptRequest & I2C_XFER_ERROR_IT) == I2C_XFER_ERROR_IT) - { - /* Enable ERR and NACK interrupts */ - tmpisr |= I2C_IT_ERRI | I2C_IT_NACKI; - } - - if ((InterruptRequest & I2C_XFER_CPLT_IT) == I2C_XFER_CPLT_IT) - { - /* Enable STOP interrupts */ - tmpisr |= I2C_IT_STOPI; - } - - if ((InterruptRequest & I2C_XFER_RELOAD_IT) == I2C_XFER_RELOAD_IT) - { - /* Enable TC interrupts */ - tmpisr |= I2C_IT_TCI; - } - - /* Disable interrupts only at the end */ - /* to avoid a breaking situation like at "t" time */ - /* all disable interrupts request are not done */ - __HAL_I2C_DISABLE_IT(hi2c, tmpisr); -} - -/** - * @brief Convert I2Cx OTHER_xxx XferOptions to functionnal XferOptions. - * @param hi2c I2C handle. - * @retval None - */ -static void I2C_ConvertOtherXferOptions(I2C_HandleTypeDef *hi2c) -{ - /* if user set XferOptions to I2C_OTHER_FRAME */ - /* it request implicitly to generate a restart condition */ - /* set XferOptions to I2C_FIRST_FRAME */ - if (hi2c->XferOptions == I2C_OTHER_FRAME) - { - hi2c->XferOptions = I2C_FIRST_FRAME; - } - /* else if user set XferOptions to I2C_OTHER_AND_LAST_FRAME */ - /* it request implicitly to generate a restart condition */ - /* then generate a stop condition at the end of transfer */ - /* set XferOptions to I2C_FIRST_AND_LAST_FRAME */ - else if (hi2c->XferOptions == I2C_OTHER_AND_LAST_FRAME) - { - hi2c->XferOptions = I2C_FIRST_AND_LAST_FRAME; - } - else - { - /* Nothing to do */ - } -} - -/** - * @} - */ - -#endif /* HAL_I2C_MODULE_ENABLED */ -/** - * @} - */ - -/** - * @} - */ - -/************************ (C) COPYRIGHT STMicroelectronics *****END OF FILE****/ diff --git a/test_dma/Drivers/STM32F7xx_HAL_Driver/Src/stm32f7xx_hal_i2c_ex.c b/test_dma/Drivers/STM32F7xx_HAL_Driver/Src/stm32f7xx_hal_i2c_ex.c deleted file mode 100644 index 1bde438..0000000 --- a/test_dma/Drivers/STM32F7xx_HAL_Driver/Src/stm32f7xx_hal_i2c_ex.c +++ /dev/null @@ -1,258 +0,0 @@ -/** - ****************************************************************************** - * @file stm32f7xx_hal_i2c_ex.c - * @author MCD Application Team - * @brief I2C Extended HAL module driver. - * This file provides firmware functions to manage the following - * functionalities of I2C Extended peripheral: - * + Extended features functions - * - @verbatim - ============================================================================== - ##### I2C peripheral Extended features ##### - ============================================================================== - - [..] Comparing to other previous devices, the I2C interface for STM32F7xx - devices contains the following additional features - - (+) Possibility to disable or enable Analog Noise Filter - (+) Use of a configured Digital Noise Filter - (+) Disable or enable Fast Mode Plus - - ##### How to use this driver ##### - ============================================================================== - [..] This driver provides functions to: - (#) Configure I2C Analog noise filter using the function HAL_I2CEx_ConfigAnalogFilter() - (#) Configure I2C Digital noise filter using the function HAL_I2CEx_ConfigDigitalFilter() - (#) Configure the enable or disable of fast mode plus driving capability using the functions : - (++) HAL_I2CEx_EnableFastModePlus() - (++) HAL_I2CEx_DisableFastModePlus() - @endverbatim - ****************************************************************************** - * @attention - * - *

© Copyright (c) 2017 STMicroelectronics. - * All rights reserved.

- * - * This software component is licensed by ST under BSD 3-Clause license, - * the "License"; You may not use this file except in compliance with the - * License. You may obtain a copy of the License at: - * opensource.org/licenses/BSD-3-Clause - * - ****************************************************************************** - */ - -/* Includes ------------------------------------------------------------------*/ -#include "stm32f7xx_hal.h" - -/** @addtogroup STM32F7xx_HAL_Driver - * @{ - */ - -/** @defgroup I2CEx I2CEx - * @brief I2C Extended HAL module driver - * @{ - */ - -#ifdef HAL_I2C_MODULE_ENABLED - -/* Private typedef -----------------------------------------------------------*/ -/* Private define ------------------------------------------------------------*/ -/* Private macro -------------------------------------------------------------*/ -/* Private variables ---------------------------------------------------------*/ -/* Private function prototypes -----------------------------------------------*/ -/* Private functions ---------------------------------------------------------*/ - -/** @defgroup I2CEx_Exported_Functions I2C Extended Exported Functions - * @{ - */ - -/** @defgroup I2CEx_Exported_Functions_Group1 Extended features functions - * @brief Extended features functions - * -@verbatim - =============================================================================== - ##### Extended features functions ##### - =============================================================================== - [..] This section provides functions allowing to: - (+) Configure Noise Filters - (+) Configure Fast Mode Plus - -@endverbatim - * @{ - */ - -/** - * @brief Configure I2C Analog noise filter. - * @param hi2c Pointer to a I2C_HandleTypeDef structure that contains - * the configuration information for the specified I2Cx peripheral. - * @param AnalogFilter New state of the Analog filter. - * @retval HAL status - */ -HAL_StatusTypeDef HAL_I2CEx_ConfigAnalogFilter(I2C_HandleTypeDef *hi2c, uint32_t AnalogFilter) -{ - /* Check the parameters */ - assert_param(IS_I2C_ALL_INSTANCE(hi2c->Instance)); - assert_param(IS_I2C_ANALOG_FILTER(AnalogFilter)); - - if (hi2c->State == HAL_I2C_STATE_READY) - { - /* Process Locked */ - __HAL_LOCK(hi2c); - - hi2c->State = HAL_I2C_STATE_BUSY; - - /* Disable the selected I2C peripheral */ - __HAL_I2C_DISABLE(hi2c); - - /* Reset I2Cx ANOFF bit */ - hi2c->Instance->CR1 &= ~(I2C_CR1_ANFOFF); - - /* Set analog filter bit*/ - hi2c->Instance->CR1 |= AnalogFilter; - - __HAL_I2C_ENABLE(hi2c); - - hi2c->State = HAL_I2C_STATE_READY; - - /* Process Unlocked */ - __HAL_UNLOCK(hi2c); - - return HAL_OK; - } - else - { - return HAL_BUSY; - } -} - -/** - * @brief Configure I2C Digital noise filter. - * @param hi2c Pointer to a I2C_HandleTypeDef structure that contains - * the configuration information for the specified I2Cx peripheral. - * @param DigitalFilter Coefficient of digital noise filter between Min_Data=0x00 and Max_Data=0x0F. - * @retval HAL status - */ -HAL_StatusTypeDef HAL_I2CEx_ConfigDigitalFilter(I2C_HandleTypeDef *hi2c, uint32_t DigitalFilter) -{ - uint32_t tmpreg; - - /* Check the parameters */ - assert_param(IS_I2C_ALL_INSTANCE(hi2c->Instance)); - assert_param(IS_I2C_DIGITAL_FILTER(DigitalFilter)); - - if (hi2c->State == HAL_I2C_STATE_READY) - { - /* Process Locked */ - __HAL_LOCK(hi2c); - - hi2c->State = HAL_I2C_STATE_BUSY; - - /* Disable the selected I2C peripheral */ - __HAL_I2C_DISABLE(hi2c); - - /* Get the old register value */ - tmpreg = hi2c->Instance->CR1; - - /* Reset I2Cx DNF bits [11:8] */ - tmpreg &= ~(I2C_CR1_DNF); - - /* Set I2Cx DNF coefficient */ - tmpreg |= DigitalFilter << 8U; - - /* Store the new register value */ - hi2c->Instance->CR1 = tmpreg; - - __HAL_I2C_ENABLE(hi2c); - - hi2c->State = HAL_I2C_STATE_READY; - - /* Process Unlocked */ - __HAL_UNLOCK(hi2c); - - return HAL_OK; - } - else - { - return HAL_BUSY; - } -} - -#if (defined(SYSCFG_PMC_I2C_PB6_FMP) || defined(SYSCFG_PMC_I2C_PB7_FMP)) || (defined(SYSCFG_PMC_I2C_PB8_FMP) || defined(SYSCFG_PMC_I2C_PB9_FMP)) || (defined(SYSCFG_PMC_I2C1_FMP)) || (defined(SYSCFG_PMC_I2C2_FMP)) || defined(SYSCFG_PMC_I2C3_FMP) || defined(SYSCFG_PMC_I2C4_FMP) -/** - * @brief Enable the I2C fast mode plus driving capability. - * @param ConfigFastModePlus Selects the pin. - * This parameter can be one of the @ref I2CEx_FastModePlus values - * @note For I2C1, fast mode plus driving capability can be enabled on all selected - * I2C1 pins using I2C_FASTMODEPLUS_I2C1 parameter or independently - * on each one of the following pins PB6, PB7, PB8 and PB9. - * @note For remaining I2C1 pins (PA14, PA15...) fast mode plus driving capability - * can be enabled only by using I2C_FASTMODEPLUS_I2C1 parameter. - * @note For all I2C2 pins fast mode plus driving capability can be enabled - * only by using I2C_FASTMODEPLUS_I2C2 parameter. - * @note For all I2C3 pins fast mode plus driving capability can be enabled - * only by using I2C_FASTMODEPLUS_I2C3 parameter. - * @note For all I2C4 pins fast mode plus driving capability can be enabled - * only by using I2C_FASTMODEPLUS_I2C4 parameter. - * @retval None - */ -void HAL_I2CEx_EnableFastModePlus(uint32_t ConfigFastModePlus) -{ - /* Check the parameter */ - assert_param(IS_I2C_FASTMODEPLUS(ConfigFastModePlus)); - - /* Enable SYSCFG clock */ - __HAL_RCC_SYSCFG_CLK_ENABLE(); - - /* Enable fast mode plus driving capability for selected pin */ - SET_BIT(SYSCFG->PMC, (uint32_t)ConfigFastModePlus); -} - -/** - * @brief Disable the I2C fast mode plus driving capability. - * @param ConfigFastModePlus Selects the pin. - * This parameter can be one of the @ref I2CEx_FastModePlus values - * @note For I2C1, fast mode plus driving capability can be disabled on all selected - * I2C1 pins using I2C_FASTMODEPLUS_I2C1 parameter or independently - * on each one of the following pins PB6, PB7, PB8 and PB9. - * @note For remaining I2C1 pins (PA14, PA15...) fast mode plus driving capability - * can be disabled only by using I2C_FASTMODEPLUS_I2C1 parameter. - * @note For all I2C2 pins fast mode plus driving capability can be disabled - * only by using I2C_FASTMODEPLUS_I2C2 parameter. - * @note For all I2C3 pins fast mode plus driving capability can be disabled - * only by using I2C_FASTMODEPLUS_I2C3 parameter. - * @note For all I2C4 pins fast mode plus driving capability can be disabled - * only by using I2C_FASTMODEPLUS_I2C4 parameter. - * @retval None - */ -void HAL_I2CEx_DisableFastModePlus(uint32_t ConfigFastModePlus) -{ - /* Check the parameter */ - assert_param(IS_I2C_FASTMODEPLUS(ConfigFastModePlus)); - - /* Enable SYSCFG clock */ - __HAL_RCC_SYSCFG_CLK_ENABLE(); - - /* Disable fast mode plus driving capability for selected pin */ - CLEAR_BIT(SYSCFG->PMC, (uint32_t)ConfigFastModePlus); -} - -#endif -/** - * @} - */ - -/** - * @} - */ - -#endif /* HAL_I2C_MODULE_ENABLED */ -/** - * @} - */ - -/** - * @} - */ - -/************************ (C) COPYRIGHT STMicroelectronics *****END OF FILE****/ diff --git a/test_dma/Drivers/STM32F7xx_HAL_Driver/Src/stm32f7xx_hal_pwr.c b/test_dma/Drivers/STM32F7xx_HAL_Driver/Src/stm32f7xx_hal_pwr.c deleted file mode 100644 index 51c4468..0000000 --- a/test_dma/Drivers/STM32F7xx_HAL_Driver/Src/stm32f7xx_hal_pwr.c +++ /dev/null @@ -1,599 +0,0 @@ -/** - ****************************************************************************** - * @file stm32f7xx_hal_pwr.c - * @author MCD Application Team - * @brief PWR HAL module driver. - * This file provides firmware functions to manage the following - * functionalities of the Power Controller (PWR) peripheral: - * + Initialization and de-initialization functions - * + Peripheral Control functions - * - ****************************************************************************** - * @attention - * - *

© Copyright (c) 2017 STMicroelectronics. - * All rights reserved.

- * - * This software component is licensed by ST under BSD 3-Clause license, - * the "License"; You may not use this file except in compliance with the - * License. You may obtain a copy of the License at: - * opensource.org/licenses/BSD-3-Clause - * - ****************************************************************************** - */ - -/* Includes ------------------------------------------------------------------*/ -#include "stm32f7xx_hal.h" - -/** @addtogroup STM32F7xx_HAL_Driver - * @{ - */ - -/** @defgroup PWR PWR - * @brief PWR HAL module driver - * @{ - */ - -#ifdef HAL_PWR_MODULE_ENABLED - -/* Private typedef -----------------------------------------------------------*/ -/* Private define ------------------------------------------------------------*/ -/** @addtogroup PWR_Private_Constants - * @{ - */ - -/** @defgroup PWR_PVD_Mode_Mask PWR PVD Mode Mask - * @{ - */ -#define PVD_MODE_IT ((uint32_t)0x00010000U) -#define PVD_MODE_EVT ((uint32_t)0x00020000U) -#define PVD_RISING_EDGE ((uint32_t)0x00000001U) -#define PVD_FALLING_EDGE ((uint32_t)0x00000002U) -/** - * @} - */ - -/** @defgroup PWR_ENABLE_WUP_Mask PWR Enable WUP Mask - * @{ - */ -#define PWR_EWUP_MASK ((uint32_t)0x00003F00) -/** - * @} - */ - -/** - * @} - */ -/* Private macro -------------------------------------------------------------*/ -/* Private variables ---------------------------------------------------------*/ -/* Private function prototypes -----------------------------------------------*/ -/* Private functions ---------------------------------------------------------*/ - -/** @defgroup PWR_Exported_Functions PWR Exported Functions - * @{ - */ - -/** @defgroup PWR_Exported_Functions_Group1 Initialization and de-initialization functions - * @brief Initialization and de-initialization functions - * -@verbatim - =============================================================================== - ##### Initialization and de-initialization functions ##### - =============================================================================== - [..] - After reset, the backup domain (RTC registers, RTC backup data - registers and backup SRAM) is protected against possible unwanted - write accesses. - To enable access to the RTC Domain and RTC registers, proceed as follows: - (+) Enable the Power Controller (PWR) APB1 interface clock using the - __HAL_RCC_PWR_CLK_ENABLE() macro. - (+) Enable access to RTC domain using the HAL_PWR_EnableBkUpAccess() function. - -@endverbatim - * @{ - */ - -/** - * @brief Deinitializes the HAL PWR peripheral registers to their default reset values. - * @retval None - */ -void HAL_PWR_DeInit(void) -{ - __HAL_RCC_PWR_FORCE_RESET(); - __HAL_RCC_PWR_RELEASE_RESET(); -} - -/** - * @brief Enables access to the backup domain (RTC registers, RTC - * backup data registers and backup SRAM). - * @note If the HSE divided by 2, 3, ..31 is used as the RTC clock, the - * Backup Domain Access should be kept enabled. - * @retval None - */ -void HAL_PWR_EnableBkUpAccess(void) -{ - /* Enable access to RTC and backup registers */ - SET_BIT(PWR->CR1, PWR_CR1_DBP); -} - -/** - * @brief Disables access to the backup domain (RTC registers, RTC - * backup data registers and backup SRAM). - * @note If the HSE divided by 2, 3, ..31 is used as the RTC clock, the - * Backup Domain Access should be kept enabled. - * @retval None - */ -void HAL_PWR_DisableBkUpAccess(void) -{ - /* Disable access to RTC and backup registers */ - CLEAR_BIT(PWR->CR1, PWR_CR1_DBP); -} - -/** - * @} - */ - -/** @defgroup PWR_Exported_Functions_Group2 Peripheral Control functions - * @brief Low Power modes configuration functions - * -@verbatim - - =============================================================================== - ##### Peripheral Control functions ##### - =============================================================================== - - *** PVD configuration *** - ========================= - [..] - (+) The PVD is used to monitor the VDD power supply by comparing it to a - threshold selected by the PVD Level (PLS[2:0] bits in the PWR_CR). - (+) A PVDO flag is available to indicate if VDD/VDDA is higher or lower - than the PVD threshold. This event is internally connected to the EXTI - line16 and can generate an interrupt if enabled. This is done through - __HAL_PWR_PVD_EXTI_ENABLE_IT() macro. - (+) The PVD is stopped in Standby mode. - - *** Wake-up pin configuration *** - ================================ - [..] - (+) Wake-up pin is used to wake up the system from Standby mode. This pin is - forced in input pull-down configuration and is active on rising edges. - (+) There are up to 6 Wake-up pin in the STM32F7 devices family - - *** Low Power modes configuration *** - ===================================== - [..] - The devices feature 3 low-power modes: - (+) Sleep mode: Cortex-M7 core stopped, peripherals kept running. - (+) Stop mode: all clocks are stopped, regulator running, regulator - in low power mode - (+) Standby mode: 1.2V domain powered off. - - *** Sleep mode *** - ================== - [..] - (+) Entry: - The Sleep mode is entered by using the HAL_PWR_EnterSLEEPMode(PWR_MAINREGULATOR_ON, PWR_SLEEPENTRY_WFI) - functions with - (++) PWR_SLEEPENTRY_WFI: enter SLEEP mode with WFI instruction - (++) PWR_SLEEPENTRY_WFE: enter SLEEP mode with WFE instruction - - -@@- The Regulator parameter is not used for the STM32F7 family - and is kept as parameter just to maintain compatibility with the - lower power families (STM32L). - (+) Exit: - Any peripheral interrupt acknowledged by the nested vectored interrupt - controller (NVIC) can wake up the device from Sleep mode. - - *** Stop mode *** - ================= - [..] - In Stop mode, all clocks in the 1.2V domain are stopped, the PLL, the HSI, - and the HSE RC oscillators are disabled. Internal SRAM and register contents - are preserved. - The voltage regulator can be configured either in normal or low-power mode. - To minimize the consumption In Stop mode, FLASH can be powered off before - entering the Stop mode using the HAL_PWREx_EnableFlashPowerDown() function. - It can be switched on again by software after exiting the Stop mode using - the HAL_PWREx_DisableFlashPowerDown() function. - - (+) Entry: - The Stop mode is entered using the HAL_PWR_EnterSTOPMode(PWR_MAINREGULATOR_ON) - function with: - (++) Main regulator ON. - (++) Low Power regulator ON. - (+) Exit: - Any EXTI Line (Internal or External) configured in Interrupt/Event mode. - - *** Standby mode *** - ==================== - [..] - (+) - The Standby mode allows to achieve the lowest power consumption. It is based - on the Cortex-M7 deep sleep mode, with the voltage regulator disabled. - The 1.2V domain is consequently powered off. The PLL, the HSI oscillator and - the HSE oscillator are also switched off. SRAM and register contents are lost - except for the RTC registers, RTC backup registers, backup SRAM and Standby - circuitry. - - The voltage regulator is OFF. - - (++) Entry: - (+++) The Standby mode is entered using the HAL_PWR_EnterSTANDBYMode() function. - (++) Exit: - (+++) WKUP pin rising or falling edge, RTC alarm (Alarm A and Alarm B), RTC - wakeup, tamper event, time stamp event, external reset in NRST pin, IWDG reset. - - *** Auto-wakeup (AWU) from low-power mode *** - ============================================= - [..] - - (+) The MCU can be woken up from low-power mode by an RTC Alarm event, an RTC - Wakeup event, a tamper event or a time-stamp event, without depending on - an external interrupt (Auto-wakeup mode). - - (+) RTC auto-wakeup (AWU) from the Stop and Standby modes - - (++) To wake up from the Stop mode with an RTC alarm event, it is necessary to - configure the RTC to generate the RTC alarm using the HAL_RTC_SetAlarm_IT() function. - - (++) To wake up from the Stop mode with an RTC Tamper or time stamp event, it - is necessary to configure the RTC to detect the tamper or time stamp event using the - HAL_RTCEx_SetTimeStamp_IT() or HAL_RTCEx_SetTamper_IT() functions. - - (++) To wake up from the Stop mode with an RTC WakeUp event, it is necessary to - configure the RTC to generate the RTC WakeUp event using the HAL_RTCEx_SetWakeUpTimer_IT() function. - -@endverbatim - * @{ - */ - -/** - * @brief Configures the voltage threshold detected by the Power Voltage Detector(PVD). - * @param sConfigPVD pointer to an PWR_PVDTypeDef structure that contains the configuration - * information for the PVD. - * @note Refer to the electrical characteristics of your device datasheet for - * more details about the voltage threshold corresponding to each - * detection level. - * @retval None - */ -void HAL_PWR_ConfigPVD(PWR_PVDTypeDef *sConfigPVD) -{ - /* Check the parameters */ - assert_param(IS_PWR_PVD_LEVEL(sConfigPVD->PVDLevel)); - assert_param(IS_PWR_PVD_MODE(sConfigPVD->Mode)); - - /* Set PLS[7:5] bits according to PVDLevel value */ - MODIFY_REG(PWR->CR1, PWR_CR1_PLS, sConfigPVD->PVDLevel); - - /* Clear any previous config. Keep it clear if no event or IT mode is selected */ - __HAL_PWR_PVD_EXTI_DISABLE_EVENT(); - __HAL_PWR_PVD_EXTI_DISABLE_IT(); - __HAL_PWR_PVD_EXTI_DISABLE_RISING_EDGE(); - __HAL_PWR_PVD_EXTI_DISABLE_FALLING_EDGE(); - - /* Configure interrupt mode */ - if((sConfigPVD->Mode & PVD_MODE_IT) == PVD_MODE_IT) - { - __HAL_PWR_PVD_EXTI_ENABLE_IT(); - } - - /* Configure event mode */ - if((sConfigPVD->Mode & PVD_MODE_EVT) == PVD_MODE_EVT) - { - __HAL_PWR_PVD_EXTI_ENABLE_EVENT(); - } - - /* Configure the edge */ - if((sConfigPVD->Mode & PVD_RISING_EDGE) == PVD_RISING_EDGE) - { - __HAL_PWR_PVD_EXTI_ENABLE_RISING_EDGE(); - } - - if((sConfigPVD->Mode & PVD_FALLING_EDGE) == PVD_FALLING_EDGE) - { - __HAL_PWR_PVD_EXTI_ENABLE_FALLING_EDGE(); - } -} - -/** - * @brief Enables the Power Voltage Detector(PVD). - * @retval None - */ -void HAL_PWR_EnablePVD(void) -{ - /* Enable the power voltage detector */ - SET_BIT(PWR->CR1, PWR_CR1_PVDE); -} - -/** - * @brief Disables the Power Voltage Detector(PVD). - * @retval None - */ -void HAL_PWR_DisablePVD(void) -{ - /* Disable the power voltage detector */ - CLEAR_BIT(PWR->CR1, PWR_CR1_PVDE); -} - -/** - * @brief Enable the WakeUp PINx functionality. - * @param WakeUpPinPolarity Specifies which Wake-Up pin to enable. - * This parameter can be one of the following legacy values, which sets the default polarity: - * detection on high level (rising edge): - * @arg PWR_WAKEUP_PIN1, PWR_WAKEUP_PIN2, PWR_WAKEUP_PIN3, PWR_WAKEUP_PIN4, PWR_WAKEUP_PIN5, PWR_WAKEUP_PIN6 - * or one of the following value where the user can explicitly states the enabled pin and - * the chosen polarity - * @arg PWR_WAKEUP_PIN1_HIGH or PWR_WAKEUP_PIN1_LOW - * @arg PWR_WAKEUP_PIN2_HIGH or PWR_WAKEUP_PIN2_LOW - * @arg PWR_WAKEUP_PIN3_HIGH or PWR_WAKEUP_PIN3_LOW - * @arg PWR_WAKEUP_PIN4_HIGH or PWR_WAKEUP_PIN4_LOW - * @arg PWR_WAKEUP_PIN5_HIGH or PWR_WAKEUP_PIN5_LOW - * @arg PWR_WAKEUP_PIN6_HIGH or PWR_WAKEUP_PIN6_LOW - * @note PWR_WAKEUP_PINx and PWR_WAKEUP_PINx_HIGH are equivalent. - * @retval None - */ -void HAL_PWR_EnableWakeUpPin(uint32_t WakeUpPinPolarity) -{ - assert_param(IS_PWR_WAKEUP_PIN(WakeUpPinPolarity)); - - /* Enable wake-up pin */ - SET_BIT(PWR->CSR2, (PWR_EWUP_MASK & WakeUpPinPolarity)); - - /* Specifies the Wake-Up pin polarity for the event detection - (rising or falling edge) */ - MODIFY_REG(PWR->CR2, (PWR_EWUP_MASK & WakeUpPinPolarity), (WakeUpPinPolarity >> 0x06)); -} - -/** - * @brief Disables the WakeUp PINx functionality. - * @param WakeUpPinx Specifies the Power Wake-Up pin to disable. - * This parameter can be one of the following values: - * @arg PWR_WAKEUP_PIN1 - * @arg PWR_WAKEUP_PIN2 - * @arg PWR_WAKEUP_PIN3 - * @arg PWR_WAKEUP_PIN4 - * @arg PWR_WAKEUP_PIN5 - * @arg PWR_WAKEUP_PIN6 - * @retval None - */ -void HAL_PWR_DisableWakeUpPin(uint32_t WakeUpPinx) -{ - assert_param(IS_PWR_WAKEUP_PIN(WakeUpPinx)); - - CLEAR_BIT(PWR->CSR2, WakeUpPinx); -} - -/** - * @brief Enters Sleep mode. - * - * @note In Sleep mode, all I/O pins keep the same state as in Run mode. - * - * @note In Sleep mode, the systick is stopped to avoid exit from this mode with - * systick interrupt when used as time base for Timeout - * - * @param Regulator Specifies the regulator state in SLEEP mode. - * This parameter can be one of the following values: - * @arg PWR_MAINREGULATOR_ON: SLEEP mode with regulator ON - * @arg PWR_LOWPOWERREGULATOR_ON: SLEEP mode with low power regulator ON - * @note This parameter is not used for the STM32F7 family and is kept as parameter - * just to maintain compatibility with the lower power families. - * @param SLEEPEntry Specifies if SLEEP mode in entered with WFI or WFE instruction. - * This parameter can be one of the following values: - * @arg PWR_SLEEPENTRY_WFI: enter SLEEP mode with WFI instruction - * @arg PWR_SLEEPENTRY_WFE: enter SLEEP mode with WFE instruction - * @retval None - */ -void HAL_PWR_EnterSLEEPMode(uint32_t Regulator, uint8_t SLEEPEntry) -{ - /* Check the parameters */ - assert_param(IS_PWR_REGULATOR(Regulator)); - assert_param(IS_PWR_SLEEP_ENTRY(SLEEPEntry)); - - /* Clear SLEEPDEEP bit of Cortex System Control Register */ - CLEAR_BIT(SCB->SCR, ((uint32_t)SCB_SCR_SLEEPDEEP_Msk)); - - /* Ensure that all instructions done before entering SLEEP mode */ - __DSB(); - __ISB(); - - /* Select SLEEP mode entry -------------------------------------------------*/ - if(SLEEPEntry == PWR_SLEEPENTRY_WFI) - { - /* Request Wait For Interrupt */ - __WFI(); - } - else - { - /* Request Wait For Event */ - __SEV(); - __WFE(); - __WFE(); - } -} - -/** - * @brief Enters Stop mode. - * @note In Stop mode, all I/O pins keep the same state as in Run mode. - * @note When exiting Stop mode by issuing an interrupt or a wakeup event, - * the HSI RC oscillator is selected as system clock. - * @note When the voltage regulator operates in low power mode, an additional - * startup delay is incurred when waking up from Stop mode. - * By keeping the internal regulator ON during Stop mode, the consumption - * is higher although the startup time is reduced. - * @param Regulator Specifies the regulator state in Stop mode. - * This parameter can be one of the following values: - * @arg PWR_MAINREGULATOR_ON: Stop mode with regulator ON - * @arg PWR_LOWPOWERREGULATOR_ON: Stop mode with low power regulator ON - * @param STOPEntry Specifies if Stop mode in entered with WFI or WFE instruction. - * This parameter can be one of the following values: - * @arg PWR_STOPENTRY_WFI: Enter Stop mode with WFI instruction - * @arg PWR_STOPENTRY_WFE: Enter Stop mode with WFE instruction - * @retval None - */ -void HAL_PWR_EnterSTOPMode(uint32_t Regulator, uint8_t STOPEntry) -{ - uint32_t tmpreg = 0; - - /* Check the parameters */ - assert_param(IS_PWR_REGULATOR(Regulator)); - assert_param(IS_PWR_STOP_ENTRY(STOPEntry)); - - /* Select the regulator state in Stop mode ---------------------------------*/ - tmpreg = PWR->CR1; - /* Clear PDDS and LPDS bits */ - tmpreg &= (uint32_t)~(PWR_CR1_PDDS | PWR_CR1_LPDS); - - /* Set LPDS, MRLVDS and LPLVDS bits according to Regulator value */ - tmpreg |= Regulator; - - /* Store the new value */ - PWR->CR1 = tmpreg; - - /* Set SLEEPDEEP bit of Cortex System Control Register */ - SCB->SCR |= SCB_SCR_SLEEPDEEP_Msk; - - /* Ensure that all instructions done before entering STOP mode */ - __DSB(); - __ISB(); - - /* Select Stop mode entry --------------------------------------------------*/ - if(STOPEntry == PWR_STOPENTRY_WFI) - { - /* Request Wait For Interrupt */ - __WFI(); - } - else - { - /* Request Wait For Event */ - __SEV(); - __WFE(); - __WFE(); - } - /* Reset SLEEPDEEP bit of Cortex System Control Register */ - SCB->SCR &= (uint32_t)~((uint32_t)SCB_SCR_SLEEPDEEP_Msk); -} - -/** - * @brief Enters Standby mode. - * @note In Standby mode, all I/O pins are high impedance except for: - * - Reset pad (still available) - * - RTC_AF1 pin (PC13) if configured for tamper, time-stamp, RTC - * Alarm out, or RTC clock calibration out. - * - RTC_AF2 pin (PI8) if configured for tamper or time-stamp. - * - WKUP pins if enabled. - * @retval None - */ -void HAL_PWR_EnterSTANDBYMode(void) -{ - /* Select Standby mode */ - PWR->CR1 |= PWR_CR1_PDDS; - - /* Set SLEEPDEEP bit of Cortex System Control Register */ - SCB->SCR |= SCB_SCR_SLEEPDEEP_Msk; - - /* This option is used to ensure that store operations are completed */ -#if defined ( __CC_ARM) - __force_stores(); -#endif - /* Request Wait For Interrupt */ - __WFI(); -} - -/** - * @brief This function handles the PWR PVD interrupt request. - * @note This API should be called under the PVD_IRQHandler(). - * @retval None - */ -void HAL_PWR_PVD_IRQHandler(void) -{ - /* Check PWR Exti flag */ - if(__HAL_PWR_PVD_EXTI_GET_FLAG() != RESET) - { - /* PWR PVD interrupt user callback */ - HAL_PWR_PVDCallback(); - - /* Clear PWR Exti pending bit */ - __HAL_PWR_PVD_EXTI_CLEAR_FLAG(); - } -} - -/** - * @brief PWR PVD interrupt callback - * @retval None - */ -__weak void HAL_PWR_PVDCallback(void) -{ - /* NOTE : This function Should not be modified, when the callback is needed, - the HAL_PWR_PVDCallback could be implemented in the user file - */ -} - -/** - * @brief Indicates Sleep-On-Exit when returning from Handler mode to Thread mode. - * @note Set SLEEPONEXIT bit of SCR register. When this bit is set, the processor - * re-enters SLEEP mode when an interruption handling is over. - * Setting this bit is useful when the processor is expected to run only on - * interruptions handling. - * @retval None - */ -void HAL_PWR_EnableSleepOnExit(void) -{ - /* Set SLEEPONEXIT bit of Cortex System Control Register */ - SET_BIT(SCB->SCR, ((uint32_t)SCB_SCR_SLEEPONEXIT_Msk)); -} - -/** - * @brief Disables Sleep-On-Exit feature when returning from Handler mode to Thread mode. - * @note Clears SLEEPONEXIT bit of SCR register. When this bit is set, the processor - * re-enters SLEEP mode when an interruption handling is over. - * @retval None - */ -void HAL_PWR_DisableSleepOnExit(void) -{ - /* Clear SLEEPONEXIT bit of Cortex System Control Register */ - CLEAR_BIT(SCB->SCR, ((uint32_t)SCB_SCR_SLEEPONEXIT_Msk)); -} - -/** - * @brief Enables CORTEX M4 SEVONPEND bit. - * @note Sets SEVONPEND bit of SCR register. When this bit is set, this causes - * WFE to wake up when an interrupt moves from inactive to pended. - * @retval None - */ -void HAL_PWR_EnableSEVOnPend(void) -{ - /* Set SEVONPEND bit of Cortex System Control Register */ - SET_BIT(SCB->SCR, ((uint32_t)SCB_SCR_SEVONPEND_Msk)); -} - -/** - * @brief Disables CORTEX M4 SEVONPEND bit. - * @note Clears SEVONPEND bit of SCR register. When this bit is set, this causes - * WFE to wake up when an interrupt moves from inactive to pended. - * @retval None - */ -void HAL_PWR_DisableSEVOnPend(void) -{ - /* Clear SEVONPEND bit of Cortex System Control Register */ - CLEAR_BIT(SCB->SCR, ((uint32_t)SCB_SCR_SEVONPEND_Msk)); -} - -/** - * @} - */ - -/** - * @} - */ - -#endif /* HAL_PWR_MODULE_ENABLED */ -/** - * @} - */ - -/** - * @} - */ - -/************************ (C) COPYRIGHT STMicroelectronics *****END OF FILE****/ diff --git a/test_dma/Drivers/STM32F7xx_HAL_Driver/Src/stm32f7xx_hal_pwr_ex.c b/test_dma/Drivers/STM32F7xx_HAL_Driver/Src/stm32f7xx_hal_pwr_ex.c deleted file mode 100644 index 6ff3321..0000000 --- a/test_dma/Drivers/STM32F7xx_HAL_Driver/Src/stm32f7xx_hal_pwr_ex.c +++ /dev/null @@ -1,554 +0,0 @@ -/** - ****************************************************************************** - * @file stm32f7xx_hal_pwr_ex.c - * @author MCD Application Team - * @brief Extended PWR HAL module driver. - * This file provides firmware functions to manage the following - * functionalities of PWR extension peripheral: - * + Peripheral Extended features functions - * - ****************************************************************************** - * @attention - * - *

© Copyright (c) 2017 STMicroelectronics. - * All rights reserved.

- * - * This software component is licensed by ST under BSD 3-Clause license, - * the "License"; You may not use this file except in compliance with the - * License. You may obtain a copy of the License at: - * opensource.org/licenses/BSD-3-Clause - * - ****************************************************************************** - */ - -/* Includes ------------------------------------------------------------------*/ -#include "stm32f7xx_hal.h" - -/** @addtogroup STM32F7xx_HAL_Driver - * @{ - */ - -/** @defgroup PWREx PWREx - * @brief PWR HAL module driver - * @{ - */ - -#ifdef HAL_PWR_MODULE_ENABLED - -/* Private typedef -----------------------------------------------------------*/ -/* Private define ------------------------------------------------------------*/ -/** @addtogroup PWREx_Private_Constants - * @{ - */ -#define PWR_OVERDRIVE_TIMEOUT_VALUE 1000 -#define PWR_UDERDRIVE_TIMEOUT_VALUE 1000 -#define PWR_BKPREG_TIMEOUT_VALUE 1000 -#define PWR_VOSRDY_TIMEOUT_VALUE 1000 -/** - * @} - */ - -/* Private macro -------------------------------------------------------------*/ -/* Private variables ---------------------------------------------------------*/ -/* Private function prototypes -----------------------------------------------*/ -/* Private functions ---------------------------------------------------------*/ -/** @defgroup PWREx_Exported_Functions PWREx Exported Functions - * @{ - */ - -/** @defgroup PWREx_Exported_Functions_Group1 Peripheral Extended features functions - * @brief Peripheral Extended features functions - * -@verbatim - - =============================================================================== - ##### Peripheral extended features functions ##### - =============================================================================== - - *** Main and Backup Regulators configuration *** - ================================================ - [..] - (+) The backup domain includes 4 Kbytes of backup SRAM accessible only from - the CPU, and address in 32-bit, 16-bit or 8-bit mode. Its content is - retained even in Standby or VBAT mode when the low power backup regulator - is enabled. It can be considered as an internal EEPROM when VBAT is - always present. You can use the HAL_PWREx_EnableBkUpReg() function to - enable the low power backup regulator. - - (+) When the backup domain is supplied by VDD (analog switch connected to VDD) - the backup SRAM is powered from VDD which replaces the VBAT power supply to - save battery life. - - (+) The backup SRAM is not mass erased by a tamper event. It is read - protected to prevent confidential data, such as cryptographic private - key, from being accessed. The backup SRAM can be erased only through - the Flash interface when a protection level change from level 1 to - level 0 is requested. - -@- Refer to the description of Read protection (RDP) in the Flash - programming manual. - - (+) The main internal regulator can be configured to have a tradeoff between - performance and power consumption when the device does not operate at - the maximum frequency. This is done through __HAL_PWR_MAINREGULATORMODE_CONFIG() - macro which configure VOS bit in PWR_CR register - - Refer to the product datasheets for more details. - - *** FLASH Power Down configuration **** - ======================================= - [..] - (+) By setting the FPDS bit in the PWR_CR register by using the - HAL_PWREx_EnableFlashPowerDown() function, the Flash memory also enters power - down mode when the device enters Stop mode. When the Flash memory - is in power down mode, an additional startup delay is incurred when - waking up from Stop mode. - - *** Over-Drive and Under-Drive configuration **** - ================================================= - [..] - (+) In Run mode: the main regulator has 2 operating modes available: - (++) Normal mode: The CPU and core logic operate at maximum frequency at a given - voltage scaling (scale 1, scale 2 or scale 3) - (++) Over-drive mode: This mode allows the CPU and the core logic to operate at a - higher frequency than the normal mode for a given voltage scaling (scale 1, - scale 2 or scale 3). This mode is enabled through HAL_PWREx_EnableOverDrive() function and - disabled by HAL_PWREx_DisableOverDrive() function, to enter or exit from Over-drive mode please follow - the sequence described in Reference manual. - - (+) In Stop mode: the main regulator or low power regulator supplies a low power - voltage to the 1.2V domain, thus preserving the content of registers - and internal SRAM. 2 operating modes are available: - (++) Normal mode: the 1.2V domain is preserved in nominal leakage mode. This mode is only - available when the main regulator or the low power regulator is used in Scale 3 or - low voltage mode. - (++) Under-drive mode: the 1.2V domain is preserved in reduced leakage mode. This mode is only - available when the main regulator or the low power regulator is in low voltage mode. - -@endverbatim - * @{ - */ - -/** - * @brief Enables the Backup Regulator. - * @retval HAL status - */ -HAL_StatusTypeDef HAL_PWREx_EnableBkUpReg(void) -{ - uint32_t tickstart = 0; - - /* Enable Backup regulator */ - PWR->CSR1 |= PWR_CSR1_BRE; - - /* Workaround for the following hardware bug: */ - /* Id 19: PWR : No STANDBY wake-up when Back-up RAM enabled (ref. Errata Sheet p23) */ - PWR->CSR1 |= PWR_CSR1_EIWUP; - - /* Get tick */ - tickstart = HAL_GetTick(); - - /* Wait till Backup regulator ready flag is set */ - while(__HAL_PWR_GET_FLAG(PWR_FLAG_BRR) == RESET) - { - if((HAL_GetTick() - tickstart ) > PWR_BKPREG_TIMEOUT_VALUE) - { - return HAL_TIMEOUT; - } - } - return HAL_OK; -} - -/** - * @brief Disables the Backup Regulator. - * @retval HAL status - */ -HAL_StatusTypeDef HAL_PWREx_DisableBkUpReg(void) -{ - uint32_t tickstart = 0; - - /* Disable Backup regulator */ - PWR->CSR1 &= (uint32_t)~((uint32_t)PWR_CSR1_BRE); - - /* Workaround for the following hardware bug: */ - /* Id 19: PWR : No STANDBY wake-up when Back-up RAM enabled (ref. Errata Sheet p23) */ - PWR->CSR1 |= PWR_CSR1_EIWUP; - - /* Get tick */ - tickstart = HAL_GetTick(); - - /* Wait till Backup regulator ready flag is set */ - while(__HAL_PWR_GET_FLAG(PWR_FLAG_BRR) != RESET) - { - if((HAL_GetTick() - tickstart ) > PWR_BKPREG_TIMEOUT_VALUE) - { - return HAL_TIMEOUT; - } - } - return HAL_OK; -} - -/** - * @brief Enables the Flash Power Down in Stop mode. - * @retval None - */ -void HAL_PWREx_EnableFlashPowerDown(void) -{ - /* Enable the Flash Power Down */ - PWR->CR1 |= PWR_CR1_FPDS; -} - -/** - * @brief Disables the Flash Power Down in Stop mode. - * @retval None - */ -void HAL_PWREx_DisableFlashPowerDown(void) -{ - /* Disable the Flash Power Down */ - PWR->CR1 &= (uint32_t)~((uint32_t)PWR_CR1_FPDS); -} - -/** - * @brief Enables Main Regulator low voltage mode. - * @retval None - */ -void HAL_PWREx_EnableMainRegulatorLowVoltage(void) -{ - /* Enable Main regulator low voltage */ - PWR->CR1 |= PWR_CR1_MRUDS; -} - -/** - * @brief Disables Main Regulator low voltage mode. - * @retval None - */ -void HAL_PWREx_DisableMainRegulatorLowVoltage(void) -{ - /* Disable Main regulator low voltage */ - PWR->CR1 &= (uint32_t)~((uint32_t)PWR_CR1_MRUDS); -} - -/** - * @brief Enables Low Power Regulator low voltage mode. - * @retval None - */ -void HAL_PWREx_EnableLowRegulatorLowVoltage(void) -{ - /* Enable low power regulator */ - PWR->CR1 |= PWR_CR1_LPUDS; -} - -/** - * @brief Disables Low Power Regulator low voltage mode. - * @retval None - */ -void HAL_PWREx_DisableLowRegulatorLowVoltage(void) -{ - /* Disable low power regulator */ - PWR->CR1 &= (uint32_t)~((uint32_t)PWR_CR1_LPUDS); -} - -/** - * @brief Activates the Over-Drive mode. - * @note This mode allows the CPU and the core logic to operate at a higher frequency - * than the normal mode for a given voltage scaling (scale 1, scale 2 or scale 3). - * @note It is recommended to enter or exit Over-drive mode when the application is not running - * critical tasks and when the system clock source is either HSI or HSE. - * During the Over-drive switch activation, no peripheral clocks should be enabled. - * The peripheral clocks must be enabled once the Over-drive mode is activated. - * @retval HAL status - */ -HAL_StatusTypeDef HAL_PWREx_EnableOverDrive(void) -{ - uint32_t tickstart = 0; - - __HAL_RCC_PWR_CLK_ENABLE(); - - /* Enable the Over-drive to extend the clock frequency to 216 MHz */ - __HAL_PWR_OVERDRIVE_ENABLE(); - - /* Get tick */ - tickstart = HAL_GetTick(); - - while(!__HAL_PWR_GET_FLAG(PWR_FLAG_ODRDY)) - { - if((HAL_GetTick() - tickstart ) > PWR_OVERDRIVE_TIMEOUT_VALUE) - { - return HAL_TIMEOUT; - } - } - - /* Enable the Over-drive switch */ - __HAL_PWR_OVERDRIVESWITCHING_ENABLE(); - - /* Get tick */ - tickstart = HAL_GetTick(); - - while(!__HAL_PWR_GET_FLAG(PWR_FLAG_ODSWRDY)) - { - if((HAL_GetTick() - tickstart ) > PWR_OVERDRIVE_TIMEOUT_VALUE) - { - return HAL_TIMEOUT; - } - } - return HAL_OK; -} - -/** - * @brief Deactivates the Over-Drive mode. - * @note This mode allows the CPU and the core logic to operate at a higher frequency - * than the normal mode for a given voltage scaling (scale 1, scale 2 or scale 3). - * @note It is recommended to enter or exit Over-drive mode when the application is not running - * critical tasks and when the system clock source is either HSI or HSE. - * During the Over-drive switch activation, no peripheral clocks should be enabled. - * The peripheral clocks must be enabled once the Over-drive mode is activated. - * @retval HAL status - */ -HAL_StatusTypeDef HAL_PWREx_DisableOverDrive(void) -{ - uint32_t tickstart = 0; - - __HAL_RCC_PWR_CLK_ENABLE(); - - /* Disable the Over-drive switch */ - __HAL_PWR_OVERDRIVESWITCHING_DISABLE(); - - /* Get tick */ - tickstart = HAL_GetTick(); - - while(__HAL_PWR_GET_FLAG(PWR_FLAG_ODSWRDY)) - { - if((HAL_GetTick() - tickstart ) > PWR_OVERDRIVE_TIMEOUT_VALUE) - { - return HAL_TIMEOUT; - } - } - - /* Disable the Over-drive */ - __HAL_PWR_OVERDRIVE_DISABLE(); - - /* Get tick */ - tickstart = HAL_GetTick(); - - while(__HAL_PWR_GET_FLAG(PWR_FLAG_ODRDY)) - { - if((HAL_GetTick() - tickstart ) > PWR_OVERDRIVE_TIMEOUT_VALUE) - { - return HAL_TIMEOUT; - } - } - - return HAL_OK; -} - -/** - * @brief Enters in Under-Drive STOP mode. - * - * @note This mode can be selected only when the Under-Drive is already active - * - * @note This mode is enabled only with STOP low power mode. - * In this mode, the 1.2V domain is preserved in reduced leakage mode. This - * mode is only available when the main regulator or the low power regulator - * is in low voltage mode - * - * @note If the Under-drive mode was enabled, it is automatically disabled after - * exiting Stop mode. - * When the voltage regulator operates in Under-drive mode, an additional - * startup delay is induced when waking up from Stop mode. - * - * @note In Stop mode, all I/O pins keep the same state as in Run mode. - * - * @note When exiting Stop mode by issuing an interrupt or a wakeup event, - * the HSI RC oscillator is selected as system clock. - * - * @note When the voltage regulator operates in low power mode, an additional - * startup delay is incurred when waking up from Stop mode. - * By keeping the internal regulator ON during Stop mode, the consumption - * is higher although the startup time is reduced. - * - * @param Regulator specifies the regulator state in STOP mode. - * This parameter can be one of the following values: - * @arg PWR_MAINREGULATOR_UNDERDRIVE_ON: Main Regulator in under-drive mode - * and Flash memory in power-down when the device is in Stop under-drive mode - * @arg PWR_LOWPOWERREGULATOR_UNDERDRIVE_ON: Low Power Regulator in under-drive mode - * and Flash memory in power-down when the device is in Stop under-drive mode - * @param STOPEntry specifies if STOP mode in entered with WFI or WFE instruction. - * This parameter can be one of the following values: - * @arg PWR_SLEEPENTRY_WFI: enter STOP mode with WFI instruction - * @arg PWR_SLEEPENTRY_WFE: enter STOP mode with WFE instruction - * @retval None - */ -HAL_StatusTypeDef HAL_PWREx_EnterUnderDriveSTOPMode(uint32_t Regulator, uint8_t STOPEntry) -{ - uint32_t tempreg = 0; - uint32_t tickstart = 0; - - /* Check the parameters */ - assert_param(IS_PWR_REGULATOR_UNDERDRIVE(Regulator)); - assert_param(IS_PWR_STOP_ENTRY(STOPEntry)); - - /* Enable Power ctrl clock */ - __HAL_RCC_PWR_CLK_ENABLE(); - /* Enable the Under-drive Mode ---------------------------------------------*/ - /* Clear Under-drive flag */ - __HAL_PWR_CLEAR_ODRUDR_FLAG(); - - /* Enable the Under-drive */ - __HAL_PWR_UNDERDRIVE_ENABLE(); - - /* Get tick */ - tickstart = HAL_GetTick(); - - /* Wait for UnderDrive mode is ready */ - while(__HAL_PWR_GET_FLAG(PWR_FLAG_UDRDY)) - { - if((HAL_GetTick() - tickstart ) > PWR_UDERDRIVE_TIMEOUT_VALUE) - { - return HAL_TIMEOUT; - } - } - - /* Select the regulator state in STOP mode ---------------------------------*/ - tempreg = PWR->CR1; - /* Clear PDDS, LPDS, MRLUDS and LPLUDS bits */ - tempreg &= (uint32_t)~(PWR_CR1_PDDS | PWR_CR1_LPDS | PWR_CR1_LPUDS | PWR_CR1_MRUDS); - - /* Set LPDS, MRLUDS and LPLUDS bits according to PWR_Regulator value */ - tempreg |= Regulator; - - /* Store the new value */ - PWR->CR1 = tempreg; - - /* Set SLEEPDEEP bit of Cortex System Control Register */ - SCB->SCR |= SCB_SCR_SLEEPDEEP_Msk; - - /* Select STOP mode entry --------------------------------------------------*/ - if(STOPEntry == PWR_SLEEPENTRY_WFI) - { - /* Request Wait For Interrupt */ - __WFI(); - } - else - { - /* Request Wait For Event */ - __WFE(); - } - /* Reset SLEEPDEEP bit of Cortex System Control Register */ - SCB->SCR &= (uint32_t)~((uint32_t)SCB_SCR_SLEEPDEEP_Msk); - - return HAL_OK; -} - -/** - * @brief Returns Voltage Scaling Range. - * @retval VOS bit field (PWR_REGULATOR_VOLTAGE_SCALE1, PWR_REGULATOR_VOLTAGE_SCALE2 or - * PWR_REGULATOR_VOLTAGE_SCALE3)PWR_REGULATOR_VOLTAGE_SCALE1 - */ -uint32_t HAL_PWREx_GetVoltageRange(void) -{ - return (PWR->CR1 & PWR_CR1_VOS); -} - -/** - * @brief Configures the main internal regulator output voltage. - * @param VoltageScaling specifies the regulator output voltage to achieve - * a tradeoff between performance and power consumption. - * This parameter can be one of the following values: - * @arg PWR_REGULATOR_VOLTAGE_SCALE1: Regulator voltage output range 1 mode, - * typical output voltage at 1.4 V, - * system frequency up to 216 MHz. - * @arg PWR_REGULATOR_VOLTAGE_SCALE2: Regulator voltage output range 2 mode, - * typical output voltage at 1.2 V, - * system frequency up to 180 MHz. - * @arg PWR_REGULATOR_VOLTAGE_SCALE3: Regulator voltage output range 2 mode, - * typical output voltage at 1.00 V, - * system frequency up to 151 MHz. - * @note To update the system clock frequency(SYSCLK): - * - Set the HSI or HSE as system clock frequency using the HAL_RCC_ClockConfig(). - * - Call the HAL_RCC_OscConfig() to configure the PLL. - * - Call HAL_PWREx_ConfigVoltageScaling() API to adjust the voltage scale. - * - Set the new system clock frequency using the HAL_RCC_ClockConfig(). - * @note The scale can be modified only when the HSI or HSE clock source is selected - * as system clock source, otherwise the API returns HAL_ERROR. - * @note When the PLL is OFF, the voltage scale 3 is automatically selected and the VOS bits - * value in the PWR_CR1 register are not taken in account. - * @note This API forces the PLL state ON to allow the possibility to configure the voltage scale 1 or 2. - * @note The new voltage scale is active only when the PLL is ON. - * @retval HAL Status - */ -HAL_StatusTypeDef HAL_PWREx_ControlVoltageScaling(uint32_t VoltageScaling) -{ - uint32_t tickstart = 0; - - assert_param(IS_PWR_REGULATOR_VOLTAGE(VoltageScaling)); - - /* Enable Power ctrl clock */ - __HAL_RCC_PWR_CLK_ENABLE(); - - /* Check if the PLL is used as system clock or not */ - if(__HAL_RCC_GET_SYSCLK_SOURCE() != RCC_CFGR_SWS_PLL) - { - /* Disable the main PLL */ - __HAL_RCC_PLL_DISABLE(); - - /* Get Start Tick */ - tickstart = HAL_GetTick(); - /* Wait till PLL is disabled */ - while(__HAL_RCC_GET_FLAG(RCC_FLAG_PLLRDY) != RESET) - { - if((HAL_GetTick() - tickstart ) > PLL_TIMEOUT_VALUE) - { - return HAL_TIMEOUT; - } - } - - /* Set Range */ - __HAL_PWR_VOLTAGESCALING_CONFIG(VoltageScaling); - - /* Enable the main PLL */ - __HAL_RCC_PLL_ENABLE(); - - /* Get Start Tick */ - tickstart = HAL_GetTick(); - /* Wait till PLL is ready */ - while(__HAL_RCC_GET_FLAG(RCC_FLAG_PLLRDY) == RESET) - { - if((HAL_GetTick() - tickstart ) > PLL_TIMEOUT_VALUE) - { - return HAL_TIMEOUT; - } - } - - /* Get Start Tick */ - tickstart = HAL_GetTick(); - while((__HAL_PWR_GET_FLAG(PWR_FLAG_VOSRDY) == RESET)) - { - if((HAL_GetTick() - tickstart ) > PWR_VOSRDY_TIMEOUT_VALUE) - { - return HAL_TIMEOUT; - } - } - } - else - { - return HAL_ERROR; - } - return HAL_OK; -} - -/** - * @} - */ - -/** - * @} - */ - -#endif /* HAL_PWR_MODULE_ENABLED */ -/** - * @} - */ - -/** - * @} - */ - -/************************ (C) COPYRIGHT STMicroelectronics *****END OF FILE****/ diff --git a/test_dma/Drivers/STM32F7xx_HAL_Driver/Src/stm32f7xx_hal_rcc.c b/test_dma/Drivers/STM32F7xx_HAL_Driver/Src/stm32f7xx_hal_rcc.c deleted file mode 100644 index bf33cff..0000000 --- a/test_dma/Drivers/STM32F7xx_HAL_Driver/Src/stm32f7xx_hal_rcc.c +++ /dev/null @@ -1,1221 +0,0 @@ -/** - ****************************************************************************** - * @file stm32f7xx_hal_rcc.c - * @author MCD Application Team - * @brief RCC HAL module driver. - * This file provides firmware functions to manage the following - * functionalities of the Reset and Clock Control (RCC) peripheral: - * + Initialization and de-initialization functions - * + Peripheral Control functions - * - @verbatim - ============================================================================== - ##### RCC specific features ##### - ============================================================================== - [..] - After reset the device is running from Internal High Speed oscillator - (HSI 16MHz) with Flash 0 wait state, Flash prefetch buffer, D-Cache - and I-Cache are disabled, and all peripherals are off except internal - SRAM, Flash and JTAG. - (+) There is no prescaler on High speed (AHB) and Low speed (APB) busses; - all peripherals mapped on these busses are running at HSI speed. - (+) The clock for all peripherals is switched off, except the SRAM and FLASH. - (+) All GPIOs are in input floating state, except the JTAG pins which - are assigned to be used for debug purpose. - - [..] - Once the device started from reset, the user application has to: - (+) Configure the clock source to be used to drive the System clock - (if the application needs higher frequency/performance) - (+) Configure the System clock frequency and Flash settings - (+) Configure the AHB and APB busses prescalers - (+) Enable the clock for the peripheral(s) to be used - (+) Configure the clock source(s) for peripherals which clocks are not - derived from the System clock (I2S, RTC, ADC, USB OTG FS/SDIO/RNG) - - ##### RCC Limitations ##### - ============================================================================== - [..] - A delay between an RCC peripheral clock enable and the effective peripheral - enabling should be taken into account in order to manage the peripheral read/write - from/to registers. - (+) This delay depends on the peripheral mapping. - (+) If peripheral is mapped on AHB: the delay is 2 AHB clock cycle - after the clock enable bit is set on the hardware register - (+) If peripheral is mapped on APB: the delay is 2 APB clock cycle - after the clock enable bit is set on the hardware register - - [..] - Implemented Workaround: - (+) For AHB & APB peripherals, a dummy read to the peripheral register has been - inserted in each __HAL_RCC_PPP_CLK_ENABLE() macro. - - @endverbatim - ****************************************************************************** - * @attention - * - *

© Copyright (c) 2017 STMicroelectronics. - * All rights reserved.

- * - * This software component is licensed by ST under BSD 3-Clause license, - * the "License"; You may not use this file except in compliance with the - * License. You may obtain a copy of the License at: - * opensource.org/licenses/BSD-3-Clause - * - ****************************************************************************** - */ - -/* Includes ------------------------------------------------------------------*/ -#include "stm32f7xx_hal.h" - -/** @addtogroup STM32F7xx_HAL_Driver - * @{ - */ - -/** @defgroup RCC RCC - * @brief RCC HAL module driver - * @{ - */ - -#ifdef HAL_RCC_MODULE_ENABLED - -/* Private typedef -----------------------------------------------------------*/ -/* Private define ------------------------------------------------------------*/ -/* Private macro -------------------------------------------------------------*/ -/** @defgroup RCC_Private_Macros RCC Private Macros - * @{ - */ - -#define MCO1_CLK_ENABLE() __HAL_RCC_GPIOA_CLK_ENABLE() -#define MCO1_GPIO_PORT GPIOA -#define MCO1_PIN GPIO_PIN_8 - -#define MCO2_CLK_ENABLE() __HAL_RCC_GPIOC_CLK_ENABLE() -#define MCO2_GPIO_PORT GPIOC -#define MCO2_PIN GPIO_PIN_9 - -/** - * @} - */ -/* Private variables ---------------------------------------------------------*/ -/** @defgroup RCC_Private_Variables RCC Private Variables - * @{ - */ - -/** - * @} - */ - -/* Private function prototypes -----------------------------------------------*/ -/* Exported functions ---------------------------------------------------------*/ - -/** @defgroup RCC_Exported_Functions RCC Exported Functions - * @{ - */ - -/** @defgroup RCC_Exported_Functions_Group1 Initialization and de-initialization functions - * @brief Initialization and Configuration functions - * - @verbatim - =============================================================================== -##### Initialization and de-initialization functions ##### - =============================================================================== - [..] - This section provides functions allowing to configure the internal/external oscillators - (HSE, HSI, LSE, LSI, PLL, CSS and MCO) and the System buses clocks (SYSCLK, AHB, APB1 - and APB2). - - [..] Internal/external clock and PLL configuration - (#) HSI (high-speed internal), 16 MHz factory-trimmed RC used directly or through - the PLL as System clock source. - - (#) LSI (low-speed internal), 32 KHz low consumption RC used as IWDG and/or RTC - clock source. - - (#) HSE (high-speed external), 4 to 26 MHz crystal oscillator used directly or - through the PLL as System clock source. Can be used also as RTC clock source. - - (#) LSE (low-speed external), 32 KHz oscillator used as RTC clock source. - - (#) PLL (clocked by HSI or HSE), featuring two different output clocks: - (++) The first output is used to generate the high speed system clock (up to 216 MHz) - (++) The second output is used to generate the clock for the USB OTG FS (48 MHz), - the random analog generator (<=48 MHz) and the SDIO (<= 48 MHz). - - (#) CSS (Clock security system), once enable using the function HAL_RCC_EnableCSS() - and if a HSE clock failure occurs(HSE used directly or through PLL as System - clock source), the System clock is automatically switched to HSI and an interrupt - is generated if enabled. The interrupt is linked to the Cortex-M7 NMI - (Non-Maskable Interrupt) exception vector. - - (#) MCO1 (microcontroller clock output), used to output HSI, LSE, HSE or PLL - clock (through a configurable prescaler) on PA8 pin. - - (#) MCO2 (microcontroller clock output), used to output HSE, PLL, SYSCLK or PLLI2S - clock (through a configurable prescaler) on PC9 pin. - - [..] System, AHB and APB busses clocks configuration - (#) Several clock sources can be used to drive the System clock (SYSCLK): HSI, - HSE and PLL. - The AHB clock (HCLK) is derived from System clock through configurable - prescaler and used to clock the CPU, memory and peripherals mapped - on AHB bus (DMA, GPIO...). APB1 (PCLK1) and APB2 (PCLK2) clocks are derived - from AHB clock through configurable prescalers and used to clock - the peripherals mapped on these busses. You can use - "HAL_RCC_GetSysClockFreq()" function to retrieve the frequencies of these clocks. - - -@- All the peripheral clocks are derived from the System clock (SYSCLK) except: - (+@) I2S: the I2S clock can be derived either from a specific PLL (PLLI2S) or - from an external clock mapped on the I2S_CKIN pin. - You have to use __HAL_RCC_PLLI2S_CONFIG() macro to configure this clock. - (+@) SAI: the SAI clock can be derived either from a specific PLL (PLLI2S) or (PLLSAI) or - from an external clock mapped on the I2S_CKIN pin. - You have to use __HAL_RCC_PLLI2S_CONFIG() macro to configure this clock. - (+@) RTC: the RTC clock can be derived either from the LSI, LSE or HSE clock - divided by 2 to 31. You have to use __HAL_RCC_RTC_CONFIG() and __HAL_RCC_RTC_ENABLE() - macros to configure this clock. - (+@) USB OTG FS, SDIO and RTC: USB OTG FS require a frequency equal to 48 MHz - to work correctly, while the SDIO require a frequency equal or lower than - to 48. This clock is derived of the main PLL through PLLQ divider. - (+@) IWDG clock which is always the LSI clock. -@endverbatim - * @{ - */ - -/** - * @brief Resets the RCC clock configuration to the default reset state. - * @note The default reset state of the clock configuration is given below: - * - HSI ON and used as system clock source - * - HSE, PLL, PLLI2S and PLLSAI OFF - * - AHB, APB1 and APB2 prescaler set to 1. - * - CSS, MCO1 and MCO2 OFF - * - All interrupts disabled - * @note This function doesn't modify the configuration of the - * - Peripheral clocks - * - LSI, LSE and RTC clocks - * @retval None - */ -HAL_StatusTypeDef HAL_RCC_DeInit(void) -{ - uint32_t tickstart; - - /* Get Start Tick */ - tickstart = HAL_GetTick(); - - /* Set HSION bit to the reset value */ - SET_BIT(RCC->CR, RCC_CR_HSION); - - /* Wait till HSI is ready */ - while (READ_BIT(RCC->CR, RCC_CR_HSIRDY) == RESET) - { - if ((HAL_GetTick() - tickstart) > HSI_TIMEOUT_VALUE) - { - return HAL_TIMEOUT; - } - } - - /* Set HSITRIM[4:0] bits to the reset value */ - SET_BIT(RCC->CR, RCC_CR_HSITRIM_4); - - /* Get Start Tick */ - tickstart = HAL_GetTick(); - - /* Reset CFGR register */ - CLEAR_REG(RCC->CFGR); - - /* Wait till clock switch is ready */ - while (READ_BIT(RCC->CFGR, RCC_CFGR_SWS) != RESET) - { - if ((HAL_GetTick() - tickstart) > CLOCKSWITCH_TIMEOUT_VALUE) - { - return HAL_TIMEOUT; - } - } - - /* Get Start Tick */ - tickstart = HAL_GetTick(); - - /* Clear HSEON, HSEBYP and CSSON bits */ - CLEAR_BIT(RCC->CR, RCC_CR_HSEON | RCC_CR_HSEBYP | RCC_CR_CSSON); - - /* Wait till HSE is disabled */ - while (READ_BIT(RCC->CR, RCC_CR_HSERDY) != RESET) - { - if ((HAL_GetTick() - tickstart) > HSE_TIMEOUT_VALUE) - { - return HAL_TIMEOUT; - } - } - - /* Get Start Tick */ - tickstart = HAL_GetTick(); - - /* Clear PLLON bit */ - CLEAR_BIT(RCC->CR, RCC_CR_PLLON); - - /* Wait till PLL is disabled */ - while (READ_BIT(RCC->CR, RCC_CR_PLLRDY) != RESET) - { - if ((HAL_GetTick() - tickstart) > PLL_TIMEOUT_VALUE) - { - return HAL_TIMEOUT; - } - } - - /* Get Start Tick */ - tickstart = HAL_GetTick(); - - /* Reset PLLI2SON bit */ - CLEAR_BIT(RCC->CR, RCC_CR_PLLI2SON); - - /* Wait till PLLI2S is disabled */ - while (READ_BIT(RCC->CR, RCC_CR_PLLI2SRDY) != RESET) - { - if ((HAL_GetTick() - tickstart) > PLLI2S_TIMEOUT_VALUE) - { - return HAL_TIMEOUT; - } - } - - /* Get Start Tick */ - tickstart = HAL_GetTick(); - - /* Reset PLLSAI bit */ - CLEAR_BIT(RCC->CR, RCC_CR_PLLSAION); - - /* Wait till PLLSAI is disabled */ - while (READ_BIT(RCC->CR, RCC_CR_PLLSAIRDY) != RESET) - { - if ((HAL_GetTick() - tickstart) > PLLSAI_TIMEOUT_VALUE) - { - return HAL_TIMEOUT; - } - } - - /* Once PLL, PLLI2S and PLLSAI are OFF, reset PLLCFGR register to default value */ - RCC->PLLCFGR = RCC_PLLCFGR_PLLM_4 | RCC_PLLCFGR_PLLN_6 | RCC_PLLCFGR_PLLN_7 | RCC_PLLCFGR_PLLQ_2 | 0x20000000U; - - /* Reset PLLI2SCFGR register to default value */ - RCC->PLLI2SCFGR = RCC_PLLI2SCFGR_PLLI2SN_6 | RCC_PLLI2SCFGR_PLLI2SN_7 | RCC_PLLI2SCFGR_PLLI2SQ_2 | RCC_PLLI2SCFGR_PLLI2SR_1; - - /* Reset PLLSAICFGR register to default value */ - RCC->PLLSAICFGR = RCC_PLLSAICFGR_PLLSAIN_6 | RCC_PLLSAICFGR_PLLSAIN_7 | RCC_PLLSAICFGR_PLLSAIQ_2 | 0x20000000U; - - /* Disable all interrupts */ - CLEAR_BIT(RCC->CIR, RCC_CIR_LSIRDYIE | RCC_CIR_LSERDYIE | RCC_CIR_HSIRDYIE | RCC_CIR_HSERDYIE | RCC_CIR_PLLRDYIE | RCC_CIR_PLLI2SRDYIE | RCC_CIR_PLLSAIRDYIE); - - /* Clear all interrupt flags */ - SET_BIT(RCC->CIR, RCC_CIR_LSIRDYC | RCC_CIR_LSERDYC | RCC_CIR_HSIRDYC | RCC_CIR_HSERDYC | RCC_CIR_PLLRDYC | RCC_CIR_PLLI2SRDYC | RCC_CIR_PLLSAIRDYC | RCC_CIR_CSSC); - - /* Clear LSION bit */ - CLEAR_BIT(RCC->CSR, RCC_CSR_LSION); - - /* Reset all CSR flags */ - SET_BIT(RCC->CSR, RCC_CSR_RMVF); - - /* Update the SystemCoreClock global variable */ - SystemCoreClock = HSI_VALUE; - - /* Adapt Systick interrupt period */ - if(HAL_InitTick(TICK_INT_PRIORITY) != HAL_OK) - { - return HAL_ERROR; - } - else - { - return HAL_OK; - } -} - -/** - * @brief Initializes the RCC Oscillators according to the specified parameters in the - * RCC_OscInitTypeDef. - * @param RCC_OscInitStruct pointer to an RCC_OscInitTypeDef structure that - * contains the configuration information for the RCC Oscillators. - * @note The PLL is not disabled when used as system clock. - * @note Transitions LSE Bypass to LSE On and LSE On to LSE Bypass are not - * supported by this function. User should request a transition to LSE Off - * first and then LSE On or LSE Bypass. - * @note Transition HSE Bypass to HSE On and HSE On to HSE Bypass are not - * supported by this function. User should request a transition to HSE Off - * first and then HSE On or HSE Bypass. - * @retval HAL status - */ -HAL_StatusTypeDef HAL_RCC_OscConfig(RCC_OscInitTypeDef *RCC_OscInitStruct) -{ - uint32_t tickstart; - FlagStatus pwrclkchanged = RESET; - - /* Check Null pointer */ - if(RCC_OscInitStruct == NULL) - { - return HAL_ERROR; - } - - /* Check the parameters */ - assert_param(IS_RCC_OSCILLATORTYPE(RCC_OscInitStruct->OscillatorType)); - - /*------------------------------- HSE Configuration ------------------------*/ - if(((RCC_OscInitStruct->OscillatorType) & RCC_OSCILLATORTYPE_HSE) == RCC_OSCILLATORTYPE_HSE) - { - /* Check the parameters */ - assert_param(IS_RCC_HSE(RCC_OscInitStruct->HSEState)); - /* When the HSE is used as system clock or clock source for PLL, It can not be disabled */ - if((__HAL_RCC_GET_SYSCLK_SOURCE() == RCC_SYSCLKSOURCE_STATUS_HSE) - || ((__HAL_RCC_GET_SYSCLK_SOURCE() == RCC_SYSCLKSOURCE_STATUS_PLLCLK) && ((RCC->PLLCFGR & RCC_PLLCFGR_PLLSRC) == RCC_PLLCFGR_PLLSRC_HSE))) - { - if((__HAL_RCC_GET_FLAG(RCC_FLAG_HSERDY) != RESET) && (RCC_OscInitStruct->HSEState == RCC_HSE_OFF)) - { - return HAL_ERROR; - } - } - else - { - /* Set the new HSE configuration ---------------------------------------*/ - __HAL_RCC_HSE_CONFIG(RCC_OscInitStruct->HSEState); - - /* Check the HSE State */ - if(RCC_OscInitStruct->HSEState != RCC_HSE_OFF) - { - /* Get Start Tick*/ - tickstart = HAL_GetTick(); - - /* Wait till HSE is ready */ - while(__HAL_RCC_GET_FLAG(RCC_FLAG_HSERDY) == RESET) - { - if((HAL_GetTick() - tickstart ) > HSE_TIMEOUT_VALUE) - { - return HAL_TIMEOUT; - } - } - } - else - { - /* Get Start Tick*/ - tickstart = HAL_GetTick(); - - /* Wait till HSE is bypassed or disabled */ - while(__HAL_RCC_GET_FLAG(RCC_FLAG_HSERDY) != RESET) - { - if((HAL_GetTick() - tickstart ) > HSE_TIMEOUT_VALUE) - { - return HAL_TIMEOUT; - } - } - } - } - } - /*----------------------------- HSI Configuration --------------------------*/ - if(((RCC_OscInitStruct->OscillatorType) & RCC_OSCILLATORTYPE_HSI) == RCC_OSCILLATORTYPE_HSI) - { - /* Check the parameters */ - assert_param(IS_RCC_HSI(RCC_OscInitStruct->HSIState)); - assert_param(IS_RCC_CALIBRATION_VALUE(RCC_OscInitStruct->HSICalibrationValue)); - - /* Check if HSI is used as system clock or as PLL source when PLL is selected as system clock */ - if((__HAL_RCC_GET_SYSCLK_SOURCE() == RCC_SYSCLKSOURCE_STATUS_HSI) - || ((__HAL_RCC_GET_SYSCLK_SOURCE() == RCC_SYSCLKSOURCE_STATUS_PLLCLK) && ((RCC->PLLCFGR & RCC_PLLCFGR_PLLSRC) == RCC_PLLCFGR_PLLSRC_HSI))) - { - /* When HSI is used as system clock it will not disabled */ - if((__HAL_RCC_GET_FLAG(RCC_FLAG_HSIRDY) != RESET) && (RCC_OscInitStruct->HSIState != RCC_HSI_ON)) - { - return HAL_ERROR; - } - /* Otherwise, just the calibration is allowed */ - else - { - /* Adjusts the Internal High Speed oscillator (HSI) calibration value.*/ - __HAL_RCC_HSI_CALIBRATIONVALUE_ADJUST(RCC_OscInitStruct->HSICalibrationValue); - } - } - else - { - /* Check the HSI State */ - if((RCC_OscInitStruct->HSIState)!= RCC_HSI_OFF) - { - /* Enable the Internal High Speed oscillator (HSI). */ - __HAL_RCC_HSI_ENABLE(); - - /* Get Start Tick*/ - tickstart = HAL_GetTick(); - - /* Wait till HSI is ready */ - while(__HAL_RCC_GET_FLAG(RCC_FLAG_HSIRDY) == RESET) - { - if((HAL_GetTick() - tickstart ) > HSI_TIMEOUT_VALUE) - { - return HAL_TIMEOUT; - } - } - - /* Adjusts the Internal High Speed oscillator (HSI) calibration value.*/ - __HAL_RCC_HSI_CALIBRATIONVALUE_ADJUST(RCC_OscInitStruct->HSICalibrationValue); - } - else - { - /* Disable the Internal High Speed oscillator (HSI). */ - __HAL_RCC_HSI_DISABLE(); - - /* Get Start Tick*/ - tickstart = HAL_GetTick(); - - /* Wait till HSI is ready */ - while(__HAL_RCC_GET_FLAG(RCC_FLAG_HSIRDY) != RESET) - { - if((HAL_GetTick() - tickstart ) > HSI_TIMEOUT_VALUE) - { - return HAL_TIMEOUT; - } - } - } - } - } - /*------------------------------ LSI Configuration -------------------------*/ - if(((RCC_OscInitStruct->OscillatorType) & RCC_OSCILLATORTYPE_LSI) == RCC_OSCILLATORTYPE_LSI) - { - /* Check the parameters */ - assert_param(IS_RCC_LSI(RCC_OscInitStruct->LSIState)); - - /* Check the LSI State */ - if((RCC_OscInitStruct->LSIState)!= RCC_LSI_OFF) - { - /* Enable the Internal Low Speed oscillator (LSI). */ - __HAL_RCC_LSI_ENABLE(); - - /* Get Start Tick*/ - tickstart = HAL_GetTick(); - - /* Wait till LSI is ready */ - while(__HAL_RCC_GET_FLAG(RCC_FLAG_LSIRDY) == RESET) - { - if((HAL_GetTick() - tickstart ) > LSI_TIMEOUT_VALUE) - { - return HAL_TIMEOUT; - } - } - } - else - { - /* Disable the Internal Low Speed oscillator (LSI). */ - __HAL_RCC_LSI_DISABLE(); - - /* Get Start Tick*/ - tickstart = HAL_GetTick(); - - /* Wait till LSI is ready */ - while(__HAL_RCC_GET_FLAG(RCC_FLAG_LSIRDY) != RESET) - { - if((HAL_GetTick() - tickstart ) > LSI_TIMEOUT_VALUE) - { - return HAL_TIMEOUT; - } - } - } - } - /*------------------------------ LSE Configuration -------------------------*/ - if(((RCC_OscInitStruct->OscillatorType) & RCC_OSCILLATORTYPE_LSE) == RCC_OSCILLATORTYPE_LSE) - { - /* Check the parameters */ - assert_param(IS_RCC_LSE(RCC_OscInitStruct->LSEState)); - - /* Update LSE configuration in Backup Domain control register */ - /* Requires to enable write access to Backup Domain of necessary */ - if(__HAL_RCC_PWR_IS_CLK_DISABLED()) - { - /* Enable Power Clock*/ - __HAL_RCC_PWR_CLK_ENABLE(); - pwrclkchanged = SET; - } - - if(HAL_IS_BIT_CLR(PWR->CR1, PWR_CR1_DBP)) - { - /* Enable write access to Backup domain */ - PWR->CR1 |= PWR_CR1_DBP; - - /* Wait for Backup domain Write protection disable */ - tickstart = HAL_GetTick(); - - while(HAL_IS_BIT_CLR(PWR->CR1, PWR_CR1_DBP)) - { - if((HAL_GetTick() - tickstart ) > RCC_DBP_TIMEOUT_VALUE) - { - return HAL_TIMEOUT; - } - } - } - - /* Set the new LSE configuration -----------------------------------------*/ - __HAL_RCC_LSE_CONFIG(RCC_OscInitStruct->LSEState); - /* Check the LSE State */ - if((RCC_OscInitStruct->LSEState) != RCC_LSE_OFF) - { - /* Get Start Tick*/ - tickstart = HAL_GetTick(); - - /* Wait till LSE is ready */ - while(__HAL_RCC_GET_FLAG(RCC_FLAG_LSERDY) == RESET) - { - if((HAL_GetTick() - tickstart ) > RCC_LSE_TIMEOUT_VALUE) - { - return HAL_TIMEOUT; - } - } - } - else - { - /* Get Start Tick*/ - tickstart = HAL_GetTick(); - - /* Wait till LSE is ready */ - while(__HAL_RCC_GET_FLAG(RCC_FLAG_LSERDY) != RESET) - { - if((HAL_GetTick() - tickstart ) > RCC_LSE_TIMEOUT_VALUE) - { - return HAL_TIMEOUT; - } - } - } - - /* Restore clock configuration if changed */ - if(pwrclkchanged == SET) - { - __HAL_RCC_PWR_CLK_DISABLE(); - } - } - /*-------------------------------- PLL Configuration -----------------------*/ - /* Check the parameters */ - assert_param(IS_RCC_PLL(RCC_OscInitStruct->PLL.PLLState)); - if ((RCC_OscInitStruct->PLL.PLLState) != RCC_PLL_NONE) - { - /* Check if the PLL is used as system clock or not */ - if(__HAL_RCC_GET_SYSCLK_SOURCE() != RCC_SYSCLKSOURCE_STATUS_PLLCLK) - { - if((RCC_OscInitStruct->PLL.PLLState) == RCC_PLL_ON) - { - /* Check the parameters */ - assert_param(IS_RCC_PLLSOURCE(RCC_OscInitStruct->PLL.PLLSource)); - assert_param(IS_RCC_PLLM_VALUE(RCC_OscInitStruct->PLL.PLLM)); - assert_param(IS_RCC_PLLN_VALUE(RCC_OscInitStruct->PLL.PLLN)); - assert_param(IS_RCC_PLLP_VALUE(RCC_OscInitStruct->PLL.PLLP)); - assert_param(IS_RCC_PLLQ_VALUE(RCC_OscInitStruct->PLL.PLLQ)); -#if defined (RCC_PLLCFGR_PLLR) - assert_param(IS_RCC_PLLR_VALUE(RCC_OscInitStruct->PLL.PLLR)); -#endif - - /* Disable the main PLL. */ - __HAL_RCC_PLL_DISABLE(); - - /* Get Start Tick*/ - tickstart = HAL_GetTick(); - - /* Wait till PLL is ready */ - while(__HAL_RCC_GET_FLAG(RCC_FLAG_PLLRDY) != RESET) - { - if((HAL_GetTick() - tickstart ) > PLL_TIMEOUT_VALUE) - { - return HAL_TIMEOUT; - } - } - - /* Configure the main PLL clock source, multiplication and division factors. */ -#if defined (RCC_PLLCFGR_PLLR) - __HAL_RCC_PLL_CONFIG(RCC_OscInitStruct->PLL.PLLSource, - RCC_OscInitStruct->PLL.PLLM, - RCC_OscInitStruct->PLL.PLLN, - RCC_OscInitStruct->PLL.PLLP, - RCC_OscInitStruct->PLL.PLLQ, - RCC_OscInitStruct->PLL.PLLR); -#else - __HAL_RCC_PLL_CONFIG(RCC_OscInitStruct->PLL.PLLSource, - RCC_OscInitStruct->PLL.PLLM, - RCC_OscInitStruct->PLL.PLLN, - RCC_OscInitStruct->PLL.PLLP, - RCC_OscInitStruct->PLL.PLLQ); -#endif - - /* Enable the main PLL. */ - __HAL_RCC_PLL_ENABLE(); - - /* Get Start Tick*/ - tickstart = HAL_GetTick(); - - /* Wait till PLL is ready */ - while(__HAL_RCC_GET_FLAG(RCC_FLAG_PLLRDY) == RESET) - { - if((HAL_GetTick() - tickstart ) > PLL_TIMEOUT_VALUE) - { - return HAL_TIMEOUT; - } - } - } - else - { - /* Disable the main PLL. */ - __HAL_RCC_PLL_DISABLE(); - - /* Get Start Tick*/ - tickstart = HAL_GetTick(); - - /* Wait till PLL is ready */ - while(__HAL_RCC_GET_FLAG(RCC_FLAG_PLLRDY) != RESET) - { - if((HAL_GetTick() - tickstart ) > PLL_TIMEOUT_VALUE) - { - return HAL_TIMEOUT; - } - } - } - } - else - { - return HAL_ERROR; - } - } - return HAL_OK; -} - -/** - * @brief Initializes the CPU, AHB and APB busses clocks according to the specified - * parameters in the RCC_ClkInitStruct. - * @param RCC_ClkInitStruct pointer to an RCC_OscInitTypeDef structure that - * contains the configuration information for the RCC peripheral. - * @param FLatency FLASH Latency, this parameter depend on device selected - * - * @note The SystemCoreClock CMSIS variable is used to store System Clock Frequency - * and updated by HAL_RCC_GetHCLKFreq() function called within this function - * - * @note The HSI is used (enabled by hardware) as system clock source after - * startup from Reset, wake-up from STOP and STANDBY mode, or in case - * of failure of the HSE used directly or indirectly as system clock - * (if the Clock Security System CSS is enabled). - * - * @note A switch from one clock source to another occurs only if the target - * clock source is ready (clock stable after startup delay or PLL locked). - * If a clock source which is not yet ready is selected, the switch will - * occur when the clock source will be ready. - * You can use HAL_RCC_GetClockConfig() function to know which clock is - * currently used as system clock source. - * @note Depending on the device voltage range, the software has to set correctly - * HPRE[3:0] bits to ensure that HCLK not exceed the maximum allowed frequency - * (for more details refer to section above "Initialization/de-initialization functions") - * @retval None - */ -HAL_StatusTypeDef HAL_RCC_ClockConfig(RCC_ClkInitTypeDef *RCC_ClkInitStruct, uint32_t FLatency) -{ - uint32_t tickstart = 0; - - /* Check Null pointer */ - if(RCC_ClkInitStruct == NULL) - { - return HAL_ERROR; - } - - /* Check the parameters */ - assert_param(IS_RCC_CLOCKTYPE(RCC_ClkInitStruct->ClockType)); - assert_param(IS_FLASH_LATENCY(FLatency)); - - /* To correctly read data from FLASH memory, the number of wait states (LATENCY) - must be correctly programmed according to the frequency of the CPU clock - (HCLK) and the supply voltage of the device. */ - - /* Increasing the CPU frequency */ - if(FLatency > __HAL_FLASH_GET_LATENCY()) - { - /* Program the new number of wait states to the LATENCY bits in the FLASH_ACR register */ - __HAL_FLASH_SET_LATENCY(FLatency); - - /* Check that the new number of wait states is taken into account to access the Flash - memory by reading the FLASH_ACR register */ - if(__HAL_FLASH_GET_LATENCY() != FLatency) - { - return HAL_ERROR; - } - } - - /*-------------------------- HCLK Configuration --------------------------*/ - if(((RCC_ClkInitStruct->ClockType) & RCC_CLOCKTYPE_HCLK) == RCC_CLOCKTYPE_HCLK) - { - /* Set the highest APBx dividers in order to ensure that we do not go through - a non-spec phase whatever we decrease or increase HCLK. */ - if(((RCC_ClkInitStruct->ClockType) & RCC_CLOCKTYPE_PCLK1) == RCC_CLOCKTYPE_PCLK1) - { - MODIFY_REG(RCC->CFGR, RCC_CFGR_PPRE1, RCC_HCLK_DIV16); - } - - if(((RCC_ClkInitStruct->ClockType) & RCC_CLOCKTYPE_PCLK2) == RCC_CLOCKTYPE_PCLK2) - { - MODIFY_REG(RCC->CFGR, RCC_CFGR_PPRE2, (RCC_HCLK_DIV16 << 3)); - } - - /* Set the new HCLK clock divider */ - assert_param(IS_RCC_HCLK(RCC_ClkInitStruct->AHBCLKDivider)); - MODIFY_REG(RCC->CFGR, RCC_CFGR_HPRE, RCC_ClkInitStruct->AHBCLKDivider); - } - - /*------------------------- SYSCLK Configuration ---------------------------*/ - if(((RCC_ClkInitStruct->ClockType) & RCC_CLOCKTYPE_SYSCLK) == RCC_CLOCKTYPE_SYSCLK) - { - assert_param(IS_RCC_SYSCLKSOURCE(RCC_ClkInitStruct->SYSCLKSource)); - - /* HSE is selected as System Clock Source */ - if(RCC_ClkInitStruct->SYSCLKSource == RCC_SYSCLKSOURCE_HSE) - { - /* Check the HSE ready flag */ - if(__HAL_RCC_GET_FLAG(RCC_FLAG_HSERDY) == RESET) - { - return HAL_ERROR; - } - } - /* PLL is selected as System Clock Source */ - else if(RCC_ClkInitStruct->SYSCLKSource == RCC_SYSCLKSOURCE_PLLCLK) - { - /* Check the PLL ready flag */ - if(__HAL_RCC_GET_FLAG(RCC_FLAG_PLLRDY) == RESET) - { - return HAL_ERROR; - } - } - /* HSI is selected as System Clock Source */ - else - { - /* Check the HSI ready flag */ - if(__HAL_RCC_GET_FLAG(RCC_FLAG_HSIRDY) == RESET) - { - return HAL_ERROR; - } - } - - __HAL_RCC_SYSCLK_CONFIG(RCC_ClkInitStruct->SYSCLKSource); - - /* Get Start Tick*/ - tickstart = HAL_GetTick(); - - while (__HAL_RCC_GET_SYSCLK_SOURCE() != (RCC_ClkInitStruct->SYSCLKSource << RCC_CFGR_SWS_Pos)) - { - if ((HAL_GetTick() - tickstart) > CLOCKSWITCH_TIMEOUT_VALUE) - { - return HAL_TIMEOUT; - } - } - } - - /* Decreasing the number of wait states because of lower CPU frequency */ - if(FLatency < __HAL_FLASH_GET_LATENCY()) - { - /* Program the new number of wait states to the LATENCY bits in the FLASH_ACR register */ - __HAL_FLASH_SET_LATENCY(FLatency); - - /* Check that the new number of wait states is taken into account to access the Flash - memory by reading the FLASH_ACR register */ - if(__HAL_FLASH_GET_LATENCY() != FLatency) - { - return HAL_ERROR; - } - } - - /*-------------------------- PCLK1 Configuration ---------------------------*/ - if(((RCC_ClkInitStruct->ClockType) & RCC_CLOCKTYPE_PCLK1) == RCC_CLOCKTYPE_PCLK1) - { - assert_param(IS_RCC_PCLK(RCC_ClkInitStruct->APB1CLKDivider)); - MODIFY_REG(RCC->CFGR, RCC_CFGR_PPRE1, RCC_ClkInitStruct->APB1CLKDivider); - } - - /*-------------------------- PCLK2 Configuration ---------------------------*/ - if(((RCC_ClkInitStruct->ClockType) & RCC_CLOCKTYPE_PCLK2) == RCC_CLOCKTYPE_PCLK2) - { - assert_param(IS_RCC_PCLK(RCC_ClkInitStruct->APB2CLKDivider)); - MODIFY_REG(RCC->CFGR, RCC_CFGR_PPRE2, ((RCC_ClkInitStruct->APB2CLKDivider) << 3)); - } - - /* Update the SystemCoreClock global variable */ - SystemCoreClock = HAL_RCC_GetSysClockFreq() >> AHBPrescTable[(RCC->CFGR & RCC_CFGR_HPRE)>> RCC_CFGR_HPRE_Pos]; - - /* Configure the source of time base considering new system clocks settings*/ - HAL_InitTick (TICK_INT_PRIORITY); - - return HAL_OK; -} - -/** - * @} - */ - -/** @defgroup RCC_Exported_Functions_Group2 Peripheral Control functions - * @brief RCC clocks control functions - * - @verbatim - =============================================================================== - ##### Peripheral Control functions ##### - =============================================================================== - [..] - This subsection provides a set of functions allowing to control the RCC Clocks - frequencies. - -@endverbatim - * @{ - */ - -/** - * @brief Selects the clock source to output on MCO1 pin(PA8) or on MCO2 pin(PC9). - * @note PA8/PC9 should be configured in alternate function mode. - * @param RCC_MCOx specifies the output direction for the clock source. - * This parameter can be one of the following values: - * @arg RCC_MCO1: Clock source to output on MCO1 pin(PA8). - * @arg RCC_MCO2: Clock source to output on MCO2 pin(PC9). - * @param RCC_MCOSource specifies the clock source to output. - * This parameter can be one of the following values: - * @arg RCC_MCO1SOURCE_HSI: HSI clock selected as MCO1 source - * @arg RCC_MCO1SOURCE_LSE: LSE clock selected as MCO1 source - * @arg RCC_MCO1SOURCE_HSE: HSE clock selected as MCO1 source - * @arg RCC_MCO1SOURCE_PLLCLK: main PLL clock selected as MCO1 source - * @arg RCC_MCO2SOURCE_SYSCLK: System clock (SYSCLK) selected as MCO2 source - * @arg RCC_MCO2SOURCE_PLLI2SCLK: PLLI2S clock selected as MCO2 source - * @arg RCC_MCO2SOURCE_HSE: HSE clock selected as MCO2 source - * @arg RCC_MCO2SOURCE_PLLCLK: main PLL clock selected as MCO2 source - * @param RCC_MCODiv specifies the MCOx prescaler. - * This parameter can be one of the following values: - * @arg RCC_MCODIV_1: no division applied to MCOx clock - * @arg RCC_MCODIV_2: division by 2 applied to MCOx clock - * @arg RCC_MCODIV_3: division by 3 applied to MCOx clock - * @arg RCC_MCODIV_4: division by 4 applied to MCOx clock - * @arg RCC_MCODIV_5: division by 5 applied to MCOx clock - * @retval None - */ -void HAL_RCC_MCOConfig(uint32_t RCC_MCOx, uint32_t RCC_MCOSource, uint32_t RCC_MCODiv) -{ - GPIO_InitTypeDef GPIO_InitStruct; - /* Check the parameters */ - assert_param(IS_RCC_MCO(RCC_MCOx)); - assert_param(IS_RCC_MCODIV(RCC_MCODiv)); - /* RCC_MCO1 */ - if(RCC_MCOx == RCC_MCO1) - { - assert_param(IS_RCC_MCO1SOURCE(RCC_MCOSource)); - - /* MCO1 Clock Enable */ - MCO1_CLK_ENABLE(); - - /* Configure the MCO1 pin in alternate function mode */ - GPIO_InitStruct.Pin = MCO1_PIN; - GPIO_InitStruct.Mode = GPIO_MODE_AF_PP; - GPIO_InitStruct.Speed = GPIO_SPEED_HIGH; - GPIO_InitStruct.Pull = GPIO_NOPULL; - GPIO_InitStruct.Alternate = GPIO_AF0_MCO; - HAL_GPIO_Init(MCO1_GPIO_PORT, &GPIO_InitStruct); - - /* Mask MCO1 and MCO1PRE[2:0] bits then Select MCO1 clock source and prescaler */ - MODIFY_REG(RCC->CFGR, (RCC_CFGR_MCO1 | RCC_CFGR_MCO1PRE), (RCC_MCOSource | RCC_MCODiv)); - } - else - { - assert_param(IS_RCC_MCO2SOURCE(RCC_MCOSource)); - - /* MCO2 Clock Enable */ - MCO2_CLK_ENABLE(); - - /* Configure the MCO2 pin in alternate function mode */ - GPIO_InitStruct.Pin = MCO2_PIN; - GPIO_InitStruct.Mode = GPIO_MODE_AF_PP; - GPIO_InitStruct.Speed = GPIO_SPEED_HIGH; - GPIO_InitStruct.Pull = GPIO_NOPULL; - GPIO_InitStruct.Alternate = GPIO_AF0_MCO; - HAL_GPIO_Init(MCO2_GPIO_PORT, &GPIO_InitStruct); - - /* Mask MCO2 and MCO2PRE[2:0] bits then Select MCO2 clock source and prescaler */ - MODIFY_REG(RCC->CFGR, (RCC_CFGR_MCO2 | RCC_CFGR_MCO2PRE), (RCC_MCOSource | (RCC_MCODiv << 3))); - } -} - -/** - * @brief Enables the Clock Security System. - * @note If a failure is detected on the HSE oscillator clock, this oscillator - * is automatically disabled and an interrupt is generated to inform the - * software about the failure (Clock Security System Interrupt, CSSI), - * allowing the MCU to perform rescue operations. The CSSI is linked to - * the Cortex-M7 NMI (Non-Maskable Interrupt) exception vector. - * @retval None - */ -void HAL_RCC_EnableCSS(void) -{ - SET_BIT(RCC->CR, RCC_CR_CSSON); -} - -/** - * @brief Disables the Clock Security System. - * @retval None - */ -void HAL_RCC_DisableCSS(void) -{ - CLEAR_BIT(RCC->CR, RCC_CR_CSSON); -} - -/** - * @brief Returns the SYSCLK frequency - * - * @note The system frequency computed by this function is not the real - * frequency in the chip. It is calculated based on the predefined - * constant and the selected clock source: - * @note If SYSCLK source is HSI, function returns values based on HSI_VALUE(*) - * @note If SYSCLK source is HSE, function returns values based on HSE_VALUE(**) - * @note If SYSCLK source is PLL, function returns values based on HSE_VALUE(**) - * or HSI_VALUE(*) multiplied/divided by the PLL factors. - * @note (*) HSI_VALUE is a constant defined in stm32f7xx_hal_conf.h file (default value - * 16 MHz) but the real value may vary depending on the variations - * in voltage and temperature. - * @note (**) HSE_VALUE is a constant defined in stm32f7xx_hal_conf.h file (default value - * 25 MHz), user has to ensure that HSE_VALUE is same as the real - * frequency of the crystal used. Otherwise, this function may - * have wrong result. - * - * @note The result of this function could be not correct when using fractional - * value for HSE crystal. - * - * @note This function can be used by the user application to compute the - * baudrate for the communication peripherals or configure other parameters. - * - * @note Each time SYSCLK changes, this function must be called to update the - * right SYSCLK value. Otherwise, any configuration based on this function will be incorrect. - * - * - * @retval SYSCLK frequency - */ -uint32_t HAL_RCC_GetSysClockFreq(void) -{ - uint32_t pllm = 0, pllvco = 0, pllp = 0; - uint32_t sysclockfreq = 0; - - /* Get SYSCLK source -------------------------------------------------------*/ - switch (RCC->CFGR & RCC_CFGR_SWS) - { - case RCC_SYSCLKSOURCE_STATUS_HSI: /* HSI used as system clock source */ - { - sysclockfreq = HSI_VALUE; - break; - } - case RCC_SYSCLKSOURCE_STATUS_HSE: /* HSE used as system clock source */ - { - sysclockfreq = HSE_VALUE; - break; - } - case RCC_SYSCLKSOURCE_STATUS_PLLCLK: /* PLL used as system clock source */ - { - /* PLL_VCO = (HSE_VALUE or HSI_VALUE / PLLM) * PLLN - SYSCLK = PLL_VCO / PLLP */ - pllm = RCC->PLLCFGR & RCC_PLLCFGR_PLLM; - if (__HAL_RCC_GET_PLL_OSCSOURCE() != RCC_PLLCFGR_PLLSRC_HSI) - { - /* HSE used as PLL clock source */ - pllvco = (uint32_t) ((((uint64_t) HSE_VALUE * ((uint64_t) ((RCC->PLLCFGR & RCC_PLLCFGR_PLLN) >> RCC_PLLCFGR_PLLN_Pos)))) / (uint64_t)pllm); - } - else - { - /* HSI used as PLL clock source */ - pllvco = (uint32_t) ((((uint64_t) HSI_VALUE * ((uint64_t) ((RCC->PLLCFGR & RCC_PLLCFGR_PLLN) >> RCC_PLLCFGR_PLLN_Pos)))) / (uint64_t)pllm); - } - pllp = ((((RCC->PLLCFGR & RCC_PLLCFGR_PLLP) >> RCC_PLLCFGR_PLLP_Pos) + 1 ) *2); - - sysclockfreq = pllvco/pllp; - break; - } - default: - { - sysclockfreq = HSI_VALUE; - break; - } - } - return sysclockfreq; -} - -/** - * @brief Returns the HCLK frequency - * @note Each time HCLK changes, this function must be called to update the - * right HCLK value. Otherwise, any configuration based on this function will be incorrect. - * @note The SystemCoreClock CMSIS variable is used to store System Clock Frequency. - * @retval HCLK frequency - */ -uint32_t HAL_RCC_GetHCLKFreq(void) -{ - return SystemCoreClock; -} - -/** - * @brief Returns the PCLK1 frequency - * @note Each time PCLK1 changes, this function must be called to update the - * right PCLK1 value. Otherwise, any configuration based on this function will be incorrect. - * @retval PCLK1 frequency - */ -uint32_t HAL_RCC_GetPCLK1Freq(void) -{ - /* Get HCLK source and Compute PCLK1 frequency ---------------------------*/ - return (HAL_RCC_GetHCLKFreq() >> APBPrescTable[(RCC->CFGR & RCC_CFGR_PPRE1)>> RCC_CFGR_PPRE1_Pos]); -} - -/** - * @brief Returns the PCLK2 frequency - * @note Each time PCLK2 changes, this function must be called to update the - * right PCLK2 value. Otherwise, any configuration based on this function will be incorrect. - * @retval PCLK2 frequency - */ -uint32_t HAL_RCC_GetPCLK2Freq(void) -{ - /* Get HCLK source and Compute PCLK2 frequency ---------------------------*/ - return (HAL_RCC_GetHCLKFreq()>> APBPrescTable[(RCC->CFGR & RCC_CFGR_PPRE2)>> RCC_CFGR_PPRE2_Pos]); -} - -/** - * @brief Configures the RCC_OscInitStruct according to the internal - * RCC configuration registers. - * @param RCC_OscInitStruct pointer to an RCC_OscInitTypeDef structure that - * will be configured. - * @retval None - */ -void HAL_RCC_GetOscConfig(RCC_OscInitTypeDef *RCC_OscInitStruct) -{ - /* Set all possible values for the Oscillator type parameter ---------------*/ - RCC_OscInitStruct->OscillatorType = RCC_OSCILLATORTYPE_HSE | RCC_OSCILLATORTYPE_HSI | RCC_OSCILLATORTYPE_LSE | RCC_OSCILLATORTYPE_LSI; - - /* Get the HSE configuration -----------------------------------------------*/ - if((RCC->CR &RCC_CR_HSEBYP) == RCC_CR_HSEBYP) - { - RCC_OscInitStruct->HSEState = RCC_HSE_BYPASS; - } - else if((RCC->CR &RCC_CR_HSEON) == RCC_CR_HSEON) - { - RCC_OscInitStruct->HSEState = RCC_HSE_ON; - } - else - { - RCC_OscInitStruct->HSEState = RCC_HSE_OFF; - } - - /* Get the HSI configuration -----------------------------------------------*/ - if((RCC->CR &RCC_CR_HSION) == RCC_CR_HSION) - { - RCC_OscInitStruct->HSIState = RCC_HSI_ON; - } - else - { - RCC_OscInitStruct->HSIState = RCC_HSI_OFF; - } - - RCC_OscInitStruct->HSICalibrationValue = (uint32_t)((RCC->CR &RCC_CR_HSITRIM) >> RCC_CR_HSITRIM_Pos); - - /* Get the LSE configuration -----------------------------------------------*/ - if((RCC->BDCR &RCC_BDCR_LSEBYP) == RCC_BDCR_LSEBYP) - { - RCC_OscInitStruct->LSEState = RCC_LSE_BYPASS; - } - else if((RCC->BDCR &RCC_BDCR_LSEON) == RCC_BDCR_LSEON) - { - RCC_OscInitStruct->LSEState = RCC_LSE_ON; - } - else - { - RCC_OscInitStruct->LSEState = RCC_LSE_OFF; - } - - /* Get the LSI configuration -----------------------------------------------*/ - if((RCC->CSR &RCC_CSR_LSION) == RCC_CSR_LSION) - { - RCC_OscInitStruct->LSIState = RCC_LSI_ON; - } - else - { - RCC_OscInitStruct->LSIState = RCC_LSI_OFF; - } - - /* Get the PLL configuration -----------------------------------------------*/ - if((RCC->CR &RCC_CR_PLLON) == RCC_CR_PLLON) - { - RCC_OscInitStruct->PLL.PLLState = RCC_PLL_ON; - } - else - { - RCC_OscInitStruct->PLL.PLLState = RCC_PLL_OFF; - } - RCC_OscInitStruct->PLL.PLLSource = (uint32_t)(RCC->PLLCFGR & RCC_PLLCFGR_PLLSRC); - RCC_OscInitStruct->PLL.PLLM = (uint32_t)(RCC->PLLCFGR & RCC_PLLCFGR_PLLM); - RCC_OscInitStruct->PLL.PLLN = (uint32_t)((RCC->PLLCFGR & RCC_PLLCFGR_PLLN) >> RCC_PLLCFGR_PLLN_Pos); - RCC_OscInitStruct->PLL.PLLP = (uint32_t)((((RCC->PLLCFGR & RCC_PLLCFGR_PLLP) + RCC_PLLCFGR_PLLP_0) << 1) >> RCC_PLLCFGR_PLLP_Pos); - RCC_OscInitStruct->PLL.PLLQ = (uint32_t)((RCC->PLLCFGR & RCC_PLLCFGR_PLLQ) >> RCC_PLLCFGR_PLLQ_Pos); -#if defined (RCC_PLLCFGR_PLLR) - RCC_OscInitStruct->PLL.PLLR = (uint32_t)((RCC->PLLCFGR & RCC_PLLCFGR_PLLR) >> POSITION_VAL(RCC_PLLCFGR_PLLR)); -#endif -} - -/** - * @brief Configures the RCC_ClkInitStruct according to the internal - * RCC configuration registers. - * @param RCC_ClkInitStruct pointer to an RCC_ClkInitTypeDef structure that - * will be configured. - * @param pFLatency Pointer on the Flash Latency. - * @retval None - */ -void HAL_RCC_GetClockConfig(RCC_ClkInitTypeDef *RCC_ClkInitStruct, uint32_t *pFLatency) -{ - /* Set all possible values for the Clock type parameter --------------------*/ - RCC_ClkInitStruct->ClockType = RCC_CLOCKTYPE_SYSCLK | RCC_CLOCKTYPE_HCLK | RCC_CLOCKTYPE_PCLK1 | RCC_CLOCKTYPE_PCLK2; - - /* Get the SYSCLK configuration --------------------------------------------*/ - RCC_ClkInitStruct->SYSCLKSource = (uint32_t)(RCC->CFGR & RCC_CFGR_SW); - - /* Get the HCLK configuration ----------------------------------------------*/ - RCC_ClkInitStruct->AHBCLKDivider = (uint32_t)(RCC->CFGR & RCC_CFGR_HPRE); - - /* Get the APB1 configuration ----------------------------------------------*/ - RCC_ClkInitStruct->APB1CLKDivider = (uint32_t)(RCC->CFGR & RCC_CFGR_PPRE1); - - /* Get the APB2 configuration ----------------------------------------------*/ - RCC_ClkInitStruct->APB2CLKDivider = (uint32_t)((RCC->CFGR & RCC_CFGR_PPRE2) >> 3); - - /* Get the Flash Wait State (Latency) configuration ------------------------*/ - *pFLatency = (uint32_t)(FLASH->ACR & FLASH_ACR_LATENCY); -} - -/** - * @brief This function handles the RCC CSS interrupt request. - * @note This API should be called under the NMI_Handler(). - * @retval None - */ -void HAL_RCC_NMI_IRQHandler(void) -{ - /* Check RCC CSSF flag */ - if(__HAL_RCC_GET_IT(RCC_IT_CSS)) - { - /* RCC Clock Security System interrupt user callback */ - HAL_RCC_CSSCallback(); - - /* Clear RCC CSS pending bit */ - __HAL_RCC_CLEAR_IT(RCC_IT_CSS); - } -} - -/** - * @brief RCC Clock Security System interrupt callback - * @retval None - */ -__weak void HAL_RCC_CSSCallback(void) -{ - /* NOTE : This function Should not be modified, when the callback is needed, - the HAL_RCC_CSSCallback could be implemented in the user file - */ -} - -/** - * @} - */ - -/** - * @} - */ - -#endif /* HAL_RCC_MODULE_ENABLED */ -/** - * @} - */ - -/** - * @} - */ - -/************************ (C) COPYRIGHT STMicroelectronics *****END OF FILE****/ diff --git a/test_dma/Drivers/STM32F7xx_HAL_Driver/Src/stm32f7xx_hal_rcc_ex.c b/test_dma/Drivers/STM32F7xx_HAL_Driver/Src/stm32f7xx_hal_rcc_ex.c deleted file mode 100644 index c1cbbd2..0000000 --- a/test_dma/Drivers/STM32F7xx_HAL_Driver/Src/stm32f7xx_hal_rcc_ex.c +++ /dev/null @@ -1,1776 +0,0 @@ -/** - ****************************************************************************** - * @file stm32f7xx_hal_rcc_ex.c - * @author MCD Application Team - * @brief Extension RCC HAL module driver. - * This file provides firmware functions to manage the following - * functionalities RCC extension peripheral: - * + Extended Peripheral Control functions - * - ****************************************************************************** - * @attention - * - *

© Copyright (c) 2017 STMicroelectronics. - * All rights reserved.

- * - * This software component is licensed by ST under BSD 3-Clause license, - * the "License"; You may not use this file except in compliance with the - * License. You may obtain a copy of the License at: - * opensource.org/licenses/BSD-3-Clause - * - ****************************************************************************** - */ - -/* Includes ------------------------------------------------------------------*/ -#include "stm32f7xx_hal.h" - -/** @addtogroup STM32F7xx_HAL_Driver - * @{ - */ - -/** @defgroup RCCEx RCCEx - * @brief RCCEx HAL module driver - * @{ - */ - -#ifdef HAL_RCC_MODULE_ENABLED - -/* Private typedef -----------------------------------------------------------*/ -/* Private define ------------------------------------------------------------*/ -/** @defgroup RCCEx_Private_Defines RCCEx Private Defines - * @{ - */ -/** - * @} - */ -/* Private macro -------------------------------------------------------------*/ -/** @defgroup RCCEx_Private_Macros RCCEx Private Macros - * @{ - */ -/** - * @} - */ - -/** @defgroup RCCEx_Private_Macros RCCEx Private Macros - * @{ - */ - -/** - * @} - */ - - -/* Private variables ---------------------------------------------------------*/ -/* Private function prototypes -----------------------------------------------*/ -/* Private functions ---------------------------------------------------------*/ - -/** @defgroup RCCEx_Exported_Functions RCCEx Exported Functions - * @{ - */ - -/** @defgroup RCCEx_Exported_Functions_Group1 Extended Peripheral Control functions - * @brief Extended Peripheral Control functions - * -@verbatim - =============================================================================== - ##### Extended Peripheral Control functions ##### - =============================================================================== - [..] - This subsection provides a set of functions allowing to control the RCC Clocks - frequencies. - [..] - (@) Important note: Care must be taken when HAL_RCCEx_PeriphCLKConfig() is used to - select the RTC clock source; in this case the Backup domain will be reset in - order to modify the RTC Clock source, as consequence RTC registers (including - the backup registers) and RCC_BDCR register will be set to their reset values. - -@endverbatim - * @{ - */ -#if defined (STM32F745xx) || defined (STM32F746xx) || defined (STM32F756xx) || defined (STM32F765xx) || \ - defined (STM32F767xx) || defined (STM32F769xx) || defined (STM32F777xx) || defined (STM32F779xx) || \ - defined (STM32F750xx) -/** - * @brief Initializes the RCC extended peripherals clocks according to the specified - * parameters in the RCC_PeriphCLKInitTypeDef. - * @param PeriphClkInit pointer to an RCC_PeriphCLKInitTypeDef structure that - * contains the configuration information for the Extended Peripherals - * clocks(I2S, SAI, LTDC, RTC, TIM, UARTs, USARTs, LTPIM, SDMMC...). - * - * @note Care must be taken when HAL_RCCEx_PeriphCLKConfig() is used to select - * the RTC clock source; in this case the Backup domain will be reset in - * order to modify the RTC Clock source, as consequence RTC registers (including - * the backup registers) are set to their reset values. - * - * @retval HAL status - */ -HAL_StatusTypeDef HAL_RCCEx_PeriphCLKConfig(RCC_PeriphCLKInitTypeDef *PeriphClkInit) -{ - uint32_t tickstart = 0; - uint32_t tmpreg0 = 0; - uint32_t tmpreg1 = 0; - uint32_t plli2sused = 0; - uint32_t pllsaiused = 0; - - /* Check the parameters */ - assert_param(IS_RCC_PERIPHCLOCK(PeriphClkInit->PeriphClockSelection)); - - /*----------------------------------- I2S configuration ----------------------------------*/ - if(((PeriphClkInit->PeriphClockSelection) & RCC_PERIPHCLK_I2S) == (RCC_PERIPHCLK_I2S)) - { - /* Check the parameters */ - assert_param(IS_RCC_I2SCLKSOURCE(PeriphClkInit->I2sClockSelection)); - - /* Configure I2S Clock source */ - __HAL_RCC_I2S_CONFIG(PeriphClkInit->I2sClockSelection); - - /* Enable the PLLI2S when it's used as clock source for I2S */ - if(PeriphClkInit->I2sClockSelection == RCC_I2SCLKSOURCE_PLLI2S) - { - plli2sused = 1; - } - } - - /*------------------------------------ SAI1 configuration --------------------------------------*/ - if(((PeriphClkInit->PeriphClockSelection) & RCC_PERIPHCLK_SAI1) == (RCC_PERIPHCLK_SAI1)) - { - /* Check the parameters */ - assert_param(IS_RCC_SAI1CLKSOURCE(PeriphClkInit->Sai1ClockSelection)); - - /* Configure SAI1 Clock source */ - __HAL_RCC_SAI1_CONFIG(PeriphClkInit->Sai1ClockSelection); - /* Enable the PLLI2S when it's used as clock source for SAI */ - if(PeriphClkInit->Sai1ClockSelection == RCC_SAI1CLKSOURCE_PLLI2S) - { - plli2sused = 1; - } - /* Enable the PLLSAI when it's used as clock source for SAI */ - if(PeriphClkInit->Sai1ClockSelection == RCC_SAI1CLKSOURCE_PLLSAI) - { - pllsaiused = 1; - } - } - - /*------------------------------------ SAI2 configuration --------------------------------------*/ - if(((PeriphClkInit->PeriphClockSelection) & RCC_PERIPHCLK_SAI2) == (RCC_PERIPHCLK_SAI2)) - { - /* Check the parameters */ - assert_param(IS_RCC_SAI2CLKSOURCE(PeriphClkInit->Sai2ClockSelection)); - - /* Configure SAI2 Clock source */ - __HAL_RCC_SAI2_CONFIG(PeriphClkInit->Sai2ClockSelection); - - /* Enable the PLLI2S when it's used as clock source for SAI */ - if(PeriphClkInit->Sai2ClockSelection == RCC_SAI2CLKSOURCE_PLLI2S) - { - plli2sused = 1; - } - /* Enable the PLLSAI when it's used as clock source for SAI */ - if(PeriphClkInit->Sai2ClockSelection == RCC_SAI2CLKSOURCE_PLLSAI) - { - pllsaiused = 1; - } - } - - /*-------------------------------------- SPDIF-RX Configuration -----------------------------------*/ - if(((PeriphClkInit->PeriphClockSelection) & RCC_PERIPHCLK_SPDIFRX) == RCC_PERIPHCLK_SPDIFRX) - { - plli2sused = 1; - } - - /*------------------------------------ RTC configuration --------------------------------------*/ - if(((PeriphClkInit->PeriphClockSelection) & RCC_PERIPHCLK_RTC) == (RCC_PERIPHCLK_RTC)) - { - /* Check for RTC Parameters used to output RTCCLK */ - assert_param(IS_RCC_RTCCLKSOURCE(PeriphClkInit->RTCClockSelection)); - - /* Enable Power Clock*/ - __HAL_RCC_PWR_CLK_ENABLE(); - - /* Enable write access to Backup domain */ - PWR->CR1 |= PWR_CR1_DBP; - - /* Get Start Tick*/ - tickstart = HAL_GetTick(); - - /* Wait for Backup domain Write protection disable */ - while((PWR->CR1 & PWR_CR1_DBP) == RESET) - { - if((HAL_GetTick() - tickstart) > RCC_DBP_TIMEOUT_VALUE) - { - return HAL_TIMEOUT; - } - } - - /* Reset the Backup domain only if the RTC Clock source selection is modified */ - tmpreg0 = (RCC->BDCR & RCC_BDCR_RTCSEL); - - if((tmpreg0 != 0x00000000U) && (tmpreg0 != (PeriphClkInit->RTCClockSelection & RCC_BDCR_RTCSEL))) - { - /* Store the content of BDCR register before the reset of Backup Domain */ - tmpreg0 = (RCC->BDCR & ~(RCC_BDCR_RTCSEL)); - - /* RTC Clock selection can be changed only if the Backup Domain is reset */ - __HAL_RCC_BACKUPRESET_FORCE(); - __HAL_RCC_BACKUPRESET_RELEASE(); - - /* Restore the Content of BDCR register */ - RCC->BDCR = tmpreg0; - - /* Wait for LSE reactivation if LSE was enable prior to Backup Domain reset */ - if (HAL_IS_BIT_SET(RCC->BDCR, RCC_BDCR_LSEON)) - { - /* Get Start Tick*/ - tickstart = HAL_GetTick(); - - /* Wait till LSE is ready */ - while(__HAL_RCC_GET_FLAG(RCC_FLAG_LSERDY) == RESET) - { - if((HAL_GetTick() - tickstart ) > RCC_LSE_TIMEOUT_VALUE) - { - return HAL_TIMEOUT; - } - } - } - } - __HAL_RCC_RTC_CONFIG(PeriphClkInit->RTCClockSelection); - } - - /*------------------------------------ TIM configuration --------------------------------------*/ - if(((PeriphClkInit->PeriphClockSelection) & RCC_PERIPHCLK_TIM) == (RCC_PERIPHCLK_TIM)) - { - /* Check the parameters */ - assert_param(IS_RCC_TIMPRES(PeriphClkInit->TIMPresSelection)); - - /* Configure Timer Prescaler */ - __HAL_RCC_TIMCLKPRESCALER(PeriphClkInit->TIMPresSelection); - } - - /*-------------------------------------- I2C1 Configuration -----------------------------------*/ - if(((PeriphClkInit->PeriphClockSelection) & RCC_PERIPHCLK_I2C1) == RCC_PERIPHCLK_I2C1) - { - /* Check the parameters */ - assert_param(IS_RCC_I2C1CLKSOURCE(PeriphClkInit->I2c1ClockSelection)); - - /* Configure the I2C1 clock source */ - __HAL_RCC_I2C1_CONFIG(PeriphClkInit->I2c1ClockSelection); - } - - /*-------------------------------------- I2C2 Configuration -----------------------------------*/ - if(((PeriphClkInit->PeriphClockSelection) & RCC_PERIPHCLK_I2C2) == RCC_PERIPHCLK_I2C2) - { - /* Check the parameters */ - assert_param(IS_RCC_I2C2CLKSOURCE(PeriphClkInit->I2c2ClockSelection)); - - /* Configure the I2C2 clock source */ - __HAL_RCC_I2C2_CONFIG(PeriphClkInit->I2c2ClockSelection); - } - - /*-------------------------------------- I2C3 Configuration -----------------------------------*/ - if(((PeriphClkInit->PeriphClockSelection) & RCC_PERIPHCLK_I2C3) == RCC_PERIPHCLK_I2C3) - { - /* Check the parameters */ - assert_param(IS_RCC_I2C3CLKSOURCE(PeriphClkInit->I2c3ClockSelection)); - - /* Configure the I2C3 clock source */ - __HAL_RCC_I2C3_CONFIG(PeriphClkInit->I2c3ClockSelection); - } - - /*-------------------------------------- I2C4 Configuration -----------------------------------*/ - if(((PeriphClkInit->PeriphClockSelection) & RCC_PERIPHCLK_I2C4) == RCC_PERIPHCLK_I2C4) - { - /* Check the parameters */ - assert_param(IS_RCC_I2C4CLKSOURCE(PeriphClkInit->I2c4ClockSelection)); - - /* Configure the I2C4 clock source */ - __HAL_RCC_I2C4_CONFIG(PeriphClkInit->I2c4ClockSelection); - } - - /*-------------------------------------- USART1 Configuration -----------------------------------*/ - if(((PeriphClkInit->PeriphClockSelection) & RCC_PERIPHCLK_USART1) == RCC_PERIPHCLK_USART1) - { - /* Check the parameters */ - assert_param(IS_RCC_USART1CLKSOURCE(PeriphClkInit->Usart1ClockSelection)); - - /* Configure the USART1 clock source */ - __HAL_RCC_USART1_CONFIG(PeriphClkInit->Usart1ClockSelection); - } - - /*-------------------------------------- USART2 Configuration -----------------------------------*/ - if(((PeriphClkInit->PeriphClockSelection) & RCC_PERIPHCLK_USART2) == RCC_PERIPHCLK_USART2) - { - /* Check the parameters */ - assert_param(IS_RCC_USART2CLKSOURCE(PeriphClkInit->Usart2ClockSelection)); - - /* Configure the USART2 clock source */ - __HAL_RCC_USART2_CONFIG(PeriphClkInit->Usart2ClockSelection); - } - - /*-------------------------------------- USART3 Configuration -----------------------------------*/ - if(((PeriphClkInit->PeriphClockSelection) & RCC_PERIPHCLK_USART3) == RCC_PERIPHCLK_USART3) - { - /* Check the parameters */ - assert_param(IS_RCC_USART3CLKSOURCE(PeriphClkInit->Usart3ClockSelection)); - - /* Configure the USART3 clock source */ - __HAL_RCC_USART3_CONFIG(PeriphClkInit->Usart3ClockSelection); - } - - /*-------------------------------------- UART4 Configuration -----------------------------------*/ - if(((PeriphClkInit->PeriphClockSelection) & RCC_PERIPHCLK_UART4) == RCC_PERIPHCLK_UART4) - { - /* Check the parameters */ - assert_param(IS_RCC_UART4CLKSOURCE(PeriphClkInit->Uart4ClockSelection)); - - /* Configure the UART4 clock source */ - __HAL_RCC_UART4_CONFIG(PeriphClkInit->Uart4ClockSelection); - } - - /*-------------------------------------- UART5 Configuration -----------------------------------*/ - if(((PeriphClkInit->PeriphClockSelection) & RCC_PERIPHCLK_UART5) == RCC_PERIPHCLK_UART5) - { - /* Check the parameters */ - assert_param(IS_RCC_UART5CLKSOURCE(PeriphClkInit->Uart5ClockSelection)); - - /* Configure the UART5 clock source */ - __HAL_RCC_UART5_CONFIG(PeriphClkInit->Uart5ClockSelection); - } - - /*-------------------------------------- USART6 Configuration -----------------------------------*/ - if(((PeriphClkInit->PeriphClockSelection) & RCC_PERIPHCLK_USART6) == RCC_PERIPHCLK_USART6) - { - /* Check the parameters */ - assert_param(IS_RCC_USART6CLKSOURCE(PeriphClkInit->Usart6ClockSelection)); - - /* Configure the USART6 clock source */ - __HAL_RCC_USART6_CONFIG(PeriphClkInit->Usart6ClockSelection); - } - - /*-------------------------------------- UART7 Configuration -----------------------------------*/ - if(((PeriphClkInit->PeriphClockSelection) & RCC_PERIPHCLK_UART7) == RCC_PERIPHCLK_UART7) - { - /* Check the parameters */ - assert_param(IS_RCC_UART7CLKSOURCE(PeriphClkInit->Uart7ClockSelection)); - - /* Configure the UART7 clock source */ - __HAL_RCC_UART7_CONFIG(PeriphClkInit->Uart7ClockSelection); - } - - /*-------------------------------------- UART8 Configuration -----------------------------------*/ - if(((PeriphClkInit->PeriphClockSelection) & RCC_PERIPHCLK_UART8) == RCC_PERIPHCLK_UART8) - { - /* Check the parameters */ - assert_param(IS_RCC_UART8CLKSOURCE(PeriphClkInit->Uart8ClockSelection)); - - /* Configure the UART8 clock source */ - __HAL_RCC_UART8_CONFIG(PeriphClkInit->Uart8ClockSelection); - } - - /*--------------------------------------- CEC Configuration -----------------------------------*/ - if(((PeriphClkInit->PeriphClockSelection) & RCC_PERIPHCLK_CEC) == RCC_PERIPHCLK_CEC) - { - /* Check the parameters */ - assert_param(IS_RCC_CECCLKSOURCE(PeriphClkInit->CecClockSelection)); - - /* Configure the CEC clock source */ - __HAL_RCC_CEC_CONFIG(PeriphClkInit->CecClockSelection); - } - - /*-------------------------------------- CK48 Configuration -----------------------------------*/ - if(((PeriphClkInit->PeriphClockSelection) & RCC_PERIPHCLK_CLK48) == RCC_PERIPHCLK_CLK48) - { - /* Check the parameters */ - assert_param(IS_RCC_CLK48SOURCE(PeriphClkInit->Clk48ClockSelection)); - - /* Configure the CLK48 source */ - __HAL_RCC_CLK48_CONFIG(PeriphClkInit->Clk48ClockSelection); - - /* Enable the PLLSAI when it's used as clock source for CK48 */ - if(PeriphClkInit->Clk48ClockSelection == RCC_CLK48SOURCE_PLLSAIP) - { - pllsaiused = 1; - } - } - - /*-------------------------------------- LTDC Configuration -----------------------------------*/ -#if defined(STM32F746xx) || defined(STM32F756xx) || defined (STM32F767xx) || defined (STM32F769xx) || defined (STM32F777xx) || defined (STM32F779xx) || defined (STM32F750xx) - if(((PeriphClkInit->PeriphClockSelection) & RCC_PERIPHCLK_LTDC) == RCC_PERIPHCLK_LTDC) - { - pllsaiused = 1; - } -#endif /* STM32F746xx || STM32F756xx || STM32F767xx || STM32F769xx || STM32F777xx || STM32F779xx || STM32F750xx */ - - /*-------------------------------------- LPTIM1 Configuration -----------------------------------*/ - if(((PeriphClkInit->PeriphClockSelection) & RCC_PERIPHCLK_LPTIM1) == RCC_PERIPHCLK_LPTIM1) - { - /* Check the parameters */ - assert_param(IS_RCC_LPTIM1CLK(PeriphClkInit->Lptim1ClockSelection)); - - /* Configure the LTPIM1 clock source */ - __HAL_RCC_LPTIM1_CONFIG(PeriphClkInit->Lptim1ClockSelection); - } - - /*------------------------------------- SDMMC1 Configuration ------------------------------------*/ - if(((PeriphClkInit->PeriphClockSelection) & RCC_PERIPHCLK_SDMMC1) == RCC_PERIPHCLK_SDMMC1) - { - /* Check the parameters */ - assert_param(IS_RCC_SDMMC1CLKSOURCE(PeriphClkInit->Sdmmc1ClockSelection)); - - /* Configure the SDMMC1 clock source */ - __HAL_RCC_SDMMC1_CONFIG(PeriphClkInit->Sdmmc1ClockSelection); - } - -#if defined (STM32F765xx) || defined (STM32F767xx) || defined (STM32F769xx) || defined (STM32F777xx) || defined (STM32F779xx) - /*------------------------------------- SDMMC2 Configuration ------------------------------------*/ - if(((PeriphClkInit->PeriphClockSelection) & RCC_PERIPHCLK_SDMMC2) == RCC_PERIPHCLK_SDMMC2) - { - /* Check the parameters */ - assert_param(IS_RCC_SDMMC2CLKSOURCE(PeriphClkInit->Sdmmc2ClockSelection)); - - /* Configure the SDMMC2 clock source */ - __HAL_RCC_SDMMC2_CONFIG(PeriphClkInit->Sdmmc2ClockSelection); - } - - /*------------------------------------- DFSDM1 Configuration -------------------------------------*/ - if(((PeriphClkInit->PeriphClockSelection) & RCC_PERIPHCLK_DFSDM1) == RCC_PERIPHCLK_DFSDM1) - { - /* Check the parameters */ - assert_param(IS_RCC_DFSDM1CLKSOURCE(PeriphClkInit->Dfsdm1ClockSelection)); - - /* Configure the DFSDM1 interface clock source */ - __HAL_RCC_DFSDM1_CONFIG(PeriphClkInit->Dfsdm1ClockSelection); - } - - /*------------------------------------- DFSDM AUDIO Configuration -------------------------------------*/ - if(((PeriphClkInit->PeriphClockSelection) & RCC_PERIPHCLK_DFSDM1_AUDIO) == RCC_PERIPHCLK_DFSDM1_AUDIO) - { - /* Check the parameters */ - assert_param(IS_RCC_DFSDM1AUDIOCLKSOURCE(PeriphClkInit->Dfsdm1AudioClockSelection)); - - /* Configure the DFSDM interface clock source */ - __HAL_RCC_DFSDM1AUDIO_CONFIG(PeriphClkInit->Dfsdm1AudioClockSelection); - } -#endif /* STM32F767xx || STM32F769xx || STM32F777xx || STM32F779xx */ - - /*-------------------------------------- PLLI2S Configuration ---------------------------------*/ - /* PLLI2S is configured when a peripheral will use it as source clock : SAI1, SAI2, I2S or SPDIF-RX */ - if((plli2sused == 1) || (PeriphClkInit->PeriphClockSelection == RCC_PERIPHCLK_PLLI2S)) - { - /* Disable the PLLI2S */ - __HAL_RCC_PLLI2S_DISABLE(); - - /* Get Start Tick*/ - tickstart = HAL_GetTick(); - - /* Wait till PLLI2S is disabled */ - while(__HAL_RCC_GET_FLAG(RCC_FLAG_PLLI2SRDY) != RESET) - { - if((HAL_GetTick() - tickstart) > PLLI2S_TIMEOUT_VALUE) - { - /* return in case of Timeout detected */ - return HAL_TIMEOUT; - } - } - - /* check for common PLLI2S Parameters */ - assert_param(IS_RCC_PLLI2SN_VALUE(PeriphClkInit->PLLI2S.PLLI2SN)); - - /*----------------- In Case of PLLI2S is selected as source clock for I2S -------------------*/ - if(((((PeriphClkInit->PeriphClockSelection) & RCC_PERIPHCLK_I2S) == RCC_PERIPHCLK_I2S) && (PeriphClkInit->I2sClockSelection == RCC_I2SCLKSOURCE_PLLI2S))) - { - /* check for Parameters */ - assert_param(IS_RCC_PLLI2SR_VALUE(PeriphClkInit->PLLI2S.PLLI2SR)); - - /* Read PLLI2SP and PLLI2SQ value from PLLI2SCFGR register (this value is not needed for I2S configuration) */ - tmpreg0 = ((RCC->PLLI2SCFGR & RCC_PLLI2SCFGR_PLLI2SP) >> RCC_PLLI2SCFGR_PLLI2SP_Pos); - tmpreg1 = ((RCC->PLLI2SCFGR & RCC_PLLI2SCFGR_PLLI2SQ) >> RCC_PLLI2SCFGR_PLLI2SQ_Pos); - /* Configure the PLLI2S division factors */ - /* PLLI2S_VCO = f(VCO clock) = f(PLLI2S clock input) x (PLLI2SN/PLLM) */ - /* I2SCLK = f(PLLI2S clock output) = f(VCO clock) / PLLI2SR */ - __HAL_RCC_PLLI2S_CONFIG(PeriphClkInit->PLLI2S.PLLI2SN , tmpreg0, tmpreg1, PeriphClkInit->PLLI2S.PLLI2SR); - } - - /*----------------- In Case of PLLI2S is selected as source clock for SAI -------------------*/ - if(((((PeriphClkInit->PeriphClockSelection) & RCC_PERIPHCLK_SAI1) == RCC_PERIPHCLK_SAI1) && (PeriphClkInit->Sai1ClockSelection == RCC_SAI1CLKSOURCE_PLLI2S)) || - ((((PeriphClkInit->PeriphClockSelection) & RCC_PERIPHCLK_SAI2) == RCC_PERIPHCLK_SAI2) && (PeriphClkInit->Sai2ClockSelection == RCC_SAI2CLKSOURCE_PLLI2S))) - { - /* Check for PLLI2S Parameters */ - assert_param(IS_RCC_PLLI2SQ_VALUE(PeriphClkInit->PLLI2S.PLLI2SQ)); - /* Check for PLLI2S/DIVQ parameters */ - assert_param(IS_RCC_PLLI2S_DIVQ_VALUE(PeriphClkInit->PLLI2SDivQ)); - - /* Read PLLI2SP and PLLI2SR values from PLLI2SCFGR register (this value is not needed for SAI configuration) */ - tmpreg0 = ((RCC->PLLI2SCFGR & RCC_PLLI2SCFGR_PLLI2SP) >> RCC_PLLI2SCFGR_PLLI2SP_Pos); - tmpreg1 = ((RCC->PLLI2SCFGR & RCC_PLLI2SCFGR_PLLI2SR) >> RCC_PLLI2SCFGR_PLLI2SR_Pos); - /* Configure the PLLI2S division factors */ - /* PLLI2S_VCO Input = PLL_SOURCE/PLLM */ - /* PLLI2S_VCO Output = PLLI2S_VCO Input * PLLI2SN */ - /* SAI_CLK(first level) = PLLI2S_VCO Output/PLLI2SQ */ - __HAL_RCC_PLLI2S_CONFIG(PeriphClkInit->PLLI2S.PLLI2SN, tmpreg0, PeriphClkInit->PLLI2S.PLLI2SQ, tmpreg1); - - /* SAI_CLK_x = SAI_CLK(first level)/PLLI2SDIVQ */ - __HAL_RCC_PLLI2S_PLLSAICLKDIVQ_CONFIG(PeriphClkInit->PLLI2SDivQ); - } - - /*----------------- In Case of PLLI2S is selected as source clock for SPDIF-RX -------------------*/ - if(((PeriphClkInit->PeriphClockSelection) & RCC_PERIPHCLK_SPDIFRX) == RCC_PERIPHCLK_SPDIFRX) - { - /* check for Parameters */ - assert_param(IS_RCC_PLLI2SP_VALUE(PeriphClkInit->PLLI2S.PLLI2SP)); - - /* Read PLLI2SR value from PLLI2SCFGR register (this value is not needed for SPDIF-RX configuration) */ - tmpreg0 = ((RCC->PLLI2SCFGR & RCC_PLLI2SCFGR_PLLI2SQ) >> RCC_PLLI2SCFGR_PLLI2SQ_Pos); - tmpreg1 = ((RCC->PLLI2SCFGR & RCC_PLLI2SCFGR_PLLI2SR) >> RCC_PLLI2SCFGR_PLLI2SR_Pos); - /* Configure the PLLI2S division factors */ - /* PLLI2S_VCO = f(VCO clock) = f(PLLI2S clock input) x (PLLI2SN/PLLM) */ - /* SPDIFCLK = f(PLLI2S clock output) = f(VCO clock) / PLLI2SP */ - __HAL_RCC_PLLI2S_CONFIG(PeriphClkInit->PLLI2S.PLLI2SN , PeriphClkInit->PLLI2S.PLLI2SP, tmpreg0, tmpreg1); - } - - /*----------------- In Case of PLLI2S is just selected -----------------*/ - if((PeriphClkInit->PeriphClockSelection & RCC_PERIPHCLK_PLLI2S) == RCC_PERIPHCLK_PLLI2S) - { - /* Check for Parameters */ - assert_param(IS_RCC_PLLI2SP_VALUE(PeriphClkInit->PLLI2S.PLLI2SP)); - assert_param(IS_RCC_PLLI2SR_VALUE(PeriphClkInit->PLLI2S.PLLI2SR)); - assert_param(IS_RCC_PLLI2SQ_VALUE(PeriphClkInit->PLLI2S.PLLI2SQ)); - - /* Configure the PLLI2S division factors */ - /* PLLI2S_VCO = f(VCO clock) = f(PLLI2S clock input) x (PLLI2SN/PLLI2SM) */ - /* SPDIFRXCLK = f(PLLI2S clock output) = f(VCO clock) / PLLI2SP */ - __HAL_RCC_PLLI2S_CONFIG(PeriphClkInit->PLLI2S.PLLI2SN , PeriphClkInit->PLLI2S.PLLI2SP, PeriphClkInit->PLLI2S.PLLI2SQ, PeriphClkInit->PLLI2S.PLLI2SR); - } - - /* Enable the PLLI2S */ - __HAL_RCC_PLLI2S_ENABLE(); - - /* Get Start Tick*/ - tickstart = HAL_GetTick(); - - /* Wait till PLLI2S is ready */ - while(__HAL_RCC_GET_FLAG(RCC_FLAG_PLLI2SRDY) == RESET) - { - if((HAL_GetTick() - tickstart) > PLLI2S_TIMEOUT_VALUE) - { - /* return in case of Timeout detected */ - return HAL_TIMEOUT; - } - } - } - - /*-------------------------------------- PLLSAI Configuration ---------------------------------*/ - /* PLLSAI is configured when a peripheral will use it as source clock : SAI1, SAI2, LTDC or CK48 */ - if(pllsaiused == 1) - { - /* Disable PLLSAI Clock */ - __HAL_RCC_PLLSAI_DISABLE(); - - /* Get Start Tick*/ - tickstart = HAL_GetTick(); - - /* Wait till PLLSAI is disabled */ - while(__HAL_RCC_PLLSAI_GET_FLAG() != RESET) - { - if((HAL_GetTick() - tickstart) > PLLSAI_TIMEOUT_VALUE) - { - /* return in case of Timeout detected */ - return HAL_TIMEOUT; - } - } - - /* Check the PLLSAI division factors */ - assert_param(IS_RCC_PLLSAIN_VALUE(PeriphClkInit->PLLSAI.PLLSAIN)); - - /*----------------- In Case of PLLSAI is selected as source clock for SAI -------------------*/ - if(((((PeriphClkInit->PeriphClockSelection) & RCC_PERIPHCLK_SAI1) == RCC_PERIPHCLK_SAI1) && (PeriphClkInit->Sai1ClockSelection == RCC_SAI1CLKSOURCE_PLLSAI)) ||\ - ((((PeriphClkInit->PeriphClockSelection) & RCC_PERIPHCLK_SAI2) == RCC_PERIPHCLK_SAI2) && (PeriphClkInit->Sai2ClockSelection == RCC_SAI2CLKSOURCE_PLLSAI))) - { - /* check for PLLSAIQ Parameter */ - assert_param(IS_RCC_PLLSAIQ_VALUE(PeriphClkInit->PLLSAI.PLLSAIQ)); - /* check for PLLSAI/DIVQ Parameter */ - assert_param(IS_RCC_PLLSAI_DIVQ_VALUE(PeriphClkInit->PLLSAIDivQ)); - - /* Read PLLSAIP value from PLLSAICFGR register (this value is not needed for SAI configuration) */ - tmpreg0 = ((RCC->PLLSAICFGR & RCC_PLLSAICFGR_PLLSAIP) >> RCC_PLLSAICFGR_PLLSAIP_Pos); - tmpreg1 = ((RCC->PLLSAICFGR & RCC_PLLI2SCFGR_PLLI2SR) >> RCC_PLLSAICFGR_PLLSAIR_Pos); - /* PLLSAI_VCO Input = PLL_SOURCE/PLLM */ - /* PLLSAI_VCO Output = PLLSAI_VCO Input * PLLSAIN */ - /* SAI_CLK(first level) = PLLSAI_VCO Output/PLLSAIQ */ - __HAL_RCC_PLLSAI_CONFIG(PeriphClkInit->PLLSAI.PLLSAIN , tmpreg0, PeriphClkInit->PLLSAI.PLLSAIQ, tmpreg1); - - /* SAI_CLK_x = SAI_CLK(first level)/PLLSAIDIVQ */ - __HAL_RCC_PLLSAI_PLLSAICLKDIVQ_CONFIG(PeriphClkInit->PLLSAIDivQ); - } - - /*----------------- In Case of PLLSAI is selected as source clock for CLK48 -------------------*/ - /* In Case of PLLI2S is selected as source clock for CK48 */ - if((((PeriphClkInit->PeriphClockSelection) & RCC_PERIPHCLK_CLK48) == RCC_PERIPHCLK_CLK48) && (PeriphClkInit->Clk48ClockSelection == RCC_CLK48SOURCE_PLLSAIP)) - { - /* check for Parameters */ - assert_param(IS_RCC_PLLSAIP_VALUE(PeriphClkInit->PLLSAI.PLLSAIP)); - /* Read PLLSAIQ and PLLSAIR value from PLLSAICFGR register (this value is not needed for CK48 configuration) */ - tmpreg0 = ((RCC->PLLSAICFGR & RCC_PLLSAICFGR_PLLSAIQ) >> RCC_PLLSAICFGR_PLLSAIQ_Pos); - tmpreg1 = ((RCC->PLLSAICFGR & RCC_PLLSAICFGR_PLLSAIR) >> RCC_PLLSAICFGR_PLLSAIR_Pos); - - /* Configure the PLLSAI division factors */ - /* PLLSAI_VCO = f(VCO clock) = f(PLLSAI clock input) x (PLLI2SN/PLLM) */ - /* 48CLK = f(PLLSAI clock output) = f(VCO clock) / PLLSAIP */ - __HAL_RCC_PLLSAI_CONFIG(PeriphClkInit->PLLSAI.PLLSAIN , PeriphClkInit->PLLSAI.PLLSAIP, tmpreg0, tmpreg1); - } - -#if defined(STM32F746xx) || defined(STM32F756xx) || defined (STM32F767xx) || defined (STM32F769xx) || defined (STM32F777xx) || defined (STM32F779xx) || defined (STM32F750xx) - /*---------------------------- LTDC configuration -------------------------------*/ - if(((PeriphClkInit->PeriphClockSelection) & RCC_PERIPHCLK_LTDC) == (RCC_PERIPHCLK_LTDC)) - { - assert_param(IS_RCC_PLLSAIR_VALUE(PeriphClkInit->PLLSAI.PLLSAIR)); - assert_param(IS_RCC_PLLSAI_DIVR_VALUE(PeriphClkInit->PLLSAIDivR)); - - /* Read PLLSAIP and PLLSAIQ value from PLLSAICFGR register (these value are not needed for LTDC configuration) */ - tmpreg0 = ((RCC->PLLSAICFGR & RCC_PLLSAICFGR_PLLSAIQ) >> RCC_PLLSAICFGR_PLLSAIQ_Pos); - tmpreg1 = ((RCC->PLLSAICFGR & RCC_PLLSAICFGR_PLLSAIP) >> RCC_PLLSAICFGR_PLLSAIP_Pos); - - /* PLLSAI_VCO Input = PLL_SOURCE/PLLM */ - /* PLLSAI_VCO Output = PLLSAI_VCO Input * PLLSAIN */ - /* LTDC_CLK(first level) = PLLSAI_VCO Output/PLLSAIR */ - __HAL_RCC_PLLSAI_CONFIG(PeriphClkInit->PLLSAI.PLLSAIN , tmpreg1, tmpreg0, PeriphClkInit->PLLSAI.PLLSAIR); - - /* LTDC_CLK = LTDC_CLK(first level)/PLLSAIDIVR */ - __HAL_RCC_PLLSAI_PLLSAICLKDIVR_CONFIG(PeriphClkInit->PLLSAIDivR); - } -#endif /* STM32F746xx || STM32F756xx || STM32F767xx || STM32F769xx || STM32F777xx || STM32F779xx || STM32F750xx */ - - /* Enable PLLSAI Clock */ - __HAL_RCC_PLLSAI_ENABLE(); - - /* Get Start Tick*/ - tickstart = HAL_GetTick(); - - /* Wait till PLLSAI is ready */ - while(__HAL_RCC_PLLSAI_GET_FLAG() == RESET) - { - if((HAL_GetTick() - tickstart) > PLLSAI_TIMEOUT_VALUE) - { - /* return in case of Timeout detected */ - return HAL_TIMEOUT; - } - } - } - return HAL_OK; -} - -/** - * @brief Get the RCC_PeriphCLKInitTypeDef according to the internal - * RCC configuration registers. - * @param PeriphClkInit pointer to the configured RCC_PeriphCLKInitTypeDef structure - * @retval None - */ -void HAL_RCCEx_GetPeriphCLKConfig(RCC_PeriphCLKInitTypeDef *PeriphClkInit) -{ - uint32_t tempreg = 0; - - /* Set all possible values for the extended clock type parameter------------*/ -#if defined (STM32F765xx) || defined (STM32F767xx) || defined (STM32F769xx) || defined (STM32F777xx) || defined (STM32F779xx) - PeriphClkInit->PeriphClockSelection = RCC_PERIPHCLK_I2S | RCC_PERIPHCLK_LPTIM1 |\ - RCC_PERIPHCLK_SAI1 | RCC_PERIPHCLK_SAI2 |\ - RCC_PERIPHCLK_TIM | RCC_PERIPHCLK_RTC |\ - RCC_PERIPHCLK_CEC | RCC_PERIPHCLK_I2C4 |\ - RCC_PERIPHCLK_I2C1 | RCC_PERIPHCLK_I2C2 |\ - RCC_PERIPHCLK_I2C3 | RCC_PERIPHCLK_USART1 |\ - RCC_PERIPHCLK_USART2 | RCC_PERIPHCLK_USART3 |\ - RCC_PERIPHCLK_UART4 | RCC_PERIPHCLK_UART5 |\ - RCC_PERIPHCLK_USART6 | RCC_PERIPHCLK_UART7 |\ - RCC_PERIPHCLK_UART8 | RCC_PERIPHCLK_SDMMC1 |\ - RCC_PERIPHCLK_CLK48 | RCC_PERIPHCLK_SDMMC2 |\ - RCC_PERIPHCLK_DFSDM1 | RCC_PERIPHCLK_DFSDM1_AUDIO; -#else - PeriphClkInit->PeriphClockSelection = RCC_PERIPHCLK_I2S | RCC_PERIPHCLK_LPTIM1 |\ - RCC_PERIPHCLK_SAI1 | RCC_PERIPHCLK_SAI2 |\ - RCC_PERIPHCLK_TIM | RCC_PERIPHCLK_RTC |\ - RCC_PERIPHCLK_CEC | RCC_PERIPHCLK_I2C4 |\ - RCC_PERIPHCLK_I2C1 | RCC_PERIPHCLK_I2C2 |\ - RCC_PERIPHCLK_I2C3 | RCC_PERIPHCLK_USART1 |\ - RCC_PERIPHCLK_USART2 | RCC_PERIPHCLK_USART3 |\ - RCC_PERIPHCLK_UART4 | RCC_PERIPHCLK_UART5 |\ - RCC_PERIPHCLK_USART6 | RCC_PERIPHCLK_UART7 |\ - RCC_PERIPHCLK_UART8 | RCC_PERIPHCLK_SDMMC1 |\ - RCC_PERIPHCLK_CLK48; -#endif /* STM32F767xx || STM32F769xx || STM32F777xx || STM32F779xx */ - - /* Get the PLLI2S Clock configuration -----------------------------------------------*/ - PeriphClkInit->PLLI2S.PLLI2SN = (uint32_t)((RCC->PLLI2SCFGR & RCC_PLLI2SCFGR_PLLI2SN) >> RCC_PLLI2SCFGR_PLLI2SN_Pos); - PeriphClkInit->PLLI2S.PLLI2SP = (uint32_t)((RCC->PLLI2SCFGR & RCC_PLLI2SCFGR_PLLI2SP) >> RCC_PLLI2SCFGR_PLLI2SP_Pos); - PeriphClkInit->PLLI2S.PLLI2SQ = (uint32_t)((RCC->PLLI2SCFGR & RCC_PLLI2SCFGR_PLLI2SQ) >> RCC_PLLI2SCFGR_PLLI2SQ_Pos); - PeriphClkInit->PLLI2S.PLLI2SR = (uint32_t)((RCC->PLLI2SCFGR & RCC_PLLI2SCFGR_PLLI2SR) >> RCC_PLLI2SCFGR_PLLI2SR_Pos); - - /* Get the PLLSAI Clock configuration -----------------------------------------------*/ - PeriphClkInit->PLLSAI.PLLSAIN = (uint32_t)((RCC->PLLSAICFGR & RCC_PLLSAICFGR_PLLSAIN) >> RCC_PLLSAICFGR_PLLSAIN_Pos); - PeriphClkInit->PLLSAI.PLLSAIP = (uint32_t)((RCC->PLLSAICFGR & RCC_PLLSAICFGR_PLLSAIP) >> RCC_PLLSAICFGR_PLLSAIP_Pos); - PeriphClkInit->PLLSAI.PLLSAIQ = (uint32_t)((RCC->PLLSAICFGR & RCC_PLLSAICFGR_PLLSAIQ) >> RCC_PLLSAICFGR_PLLSAIQ_Pos); - PeriphClkInit->PLLSAI.PLLSAIR = (uint32_t)((RCC->PLLSAICFGR & RCC_PLLSAICFGR_PLLSAIR) >> RCC_PLLSAICFGR_PLLSAIR_Pos); - - /* Get the PLLSAI/PLLI2S division factors -------------------------------------------*/ - PeriphClkInit->PLLI2SDivQ = (uint32_t)((RCC->DCKCFGR1 & RCC_DCKCFGR1_PLLI2SDIVQ) >> RCC_DCKCFGR1_PLLI2SDIVQ_Pos); - PeriphClkInit->PLLSAIDivQ = (uint32_t)((RCC->DCKCFGR1 & RCC_DCKCFGR1_PLLSAIDIVQ) >> RCC_DCKCFGR1_PLLSAIDIVQ_Pos); - PeriphClkInit->PLLSAIDivR = (uint32_t)((RCC->DCKCFGR1 & RCC_DCKCFGR1_PLLSAIDIVR) >> RCC_DCKCFGR1_PLLSAIDIVR_Pos); - - /* Get the SAI1 clock configuration ----------------------------------------------*/ - PeriphClkInit->Sai1ClockSelection = __HAL_RCC_GET_SAI1_SOURCE(); - - /* Get the SAI2 clock configuration ----------------------------------------------*/ - PeriphClkInit->Sai2ClockSelection = __HAL_RCC_GET_SAI2_SOURCE(); - - /* Get the I2S clock configuration ------------------------------------------*/ - PeriphClkInit->I2sClockSelection = __HAL_RCC_GET_I2SCLKSOURCE(); - - /* Get the I2C1 clock configuration ------------------------------------------*/ - PeriphClkInit->I2c1ClockSelection = __HAL_RCC_GET_I2C1_SOURCE(); - - /* Get the I2C2 clock configuration ------------------------------------------*/ - PeriphClkInit->I2c2ClockSelection = __HAL_RCC_GET_I2C2_SOURCE(); - - /* Get the I2C3 clock configuration ------------------------------------------*/ - PeriphClkInit->I2c3ClockSelection = __HAL_RCC_GET_I2C3_SOURCE(); - - /* Get the I2C4 clock configuration ------------------------------------------*/ - PeriphClkInit->I2c4ClockSelection = __HAL_RCC_GET_I2C4_SOURCE(); - - /* Get the USART1 clock configuration ------------------------------------------*/ - PeriphClkInit->Usart1ClockSelection = __HAL_RCC_GET_USART1_SOURCE(); - - /* Get the USART2 clock configuration ------------------------------------------*/ - PeriphClkInit->Usart2ClockSelection = __HAL_RCC_GET_USART2_SOURCE(); - - /* Get the USART3 clock configuration ------------------------------------------*/ - PeriphClkInit->Usart3ClockSelection = __HAL_RCC_GET_USART3_SOURCE(); - - /* Get the UART4 clock configuration ------------------------------------------*/ - PeriphClkInit->Uart4ClockSelection = __HAL_RCC_GET_UART4_SOURCE(); - - /* Get the UART5 clock configuration ------------------------------------------*/ - PeriphClkInit->Uart5ClockSelection = __HAL_RCC_GET_UART5_SOURCE(); - - /* Get the USART6 clock configuration ------------------------------------------*/ - PeriphClkInit->Usart6ClockSelection = __HAL_RCC_GET_USART6_SOURCE(); - - /* Get the UART7 clock configuration ------------------------------------------*/ - PeriphClkInit->Uart7ClockSelection = __HAL_RCC_GET_UART7_SOURCE(); - - /* Get the UART8 clock configuration ------------------------------------------*/ - PeriphClkInit->Uart8ClockSelection = __HAL_RCC_GET_UART8_SOURCE(); - - /* Get the LPTIM1 clock configuration ------------------------------------------*/ - PeriphClkInit->Lptim1ClockSelection = __HAL_RCC_GET_LPTIM1_SOURCE(); - - /* Get the CEC clock configuration -----------------------------------------------*/ - PeriphClkInit->CecClockSelection = __HAL_RCC_GET_CEC_SOURCE(); - - /* Get the CK48 clock configuration -----------------------------------------------*/ - PeriphClkInit->Clk48ClockSelection = __HAL_RCC_GET_CLK48_SOURCE(); - - /* Get the SDMMC1 clock configuration -----------------------------------------------*/ - PeriphClkInit->Sdmmc1ClockSelection = __HAL_RCC_GET_SDMMC1_SOURCE(); - -#if defined (STM32F765xx) || defined (STM32F767xx) || defined (STM32F769xx) || defined (STM32F777xx) || defined (STM32F779xx) - /* Get the SDMMC2 clock configuration -----------------------------------------------*/ - PeriphClkInit->Sdmmc2ClockSelection = __HAL_RCC_GET_SDMMC2_SOURCE(); - - /* Get the DFSDM clock configuration -----------------------------------------------*/ - PeriphClkInit->Dfsdm1ClockSelection = __HAL_RCC_GET_DFSDM1_SOURCE(); - - /* Get the DFSDM AUDIO clock configuration -----------------------------------------------*/ - PeriphClkInit->Dfsdm1AudioClockSelection = __HAL_RCC_GET_DFSDM1AUDIO_SOURCE(); -#endif /* STM32F767xx || STM32F769xx || STM32F777xx || STM32F779xx */ - - /* Get the RTC Clock configuration -----------------------------------------------*/ - tempreg = (RCC->CFGR & RCC_CFGR_RTCPRE); - PeriphClkInit->RTCClockSelection = (uint32_t)((tempreg) | (RCC->BDCR & RCC_BDCR_RTCSEL)); - - /* Get the TIM Prescaler configuration --------------------------------------------*/ - if ((RCC->DCKCFGR1 & RCC_DCKCFGR1_TIMPRE) == RESET) - { - PeriphClkInit->TIMPresSelection = RCC_TIMPRES_DESACTIVATED; - } - else - { - PeriphClkInit->TIMPresSelection = RCC_TIMPRES_ACTIVATED; - } -} -#endif /* STM32F745xx || STM32F746xx || STM32F756xx || STM32F765xx || STM32F767xx || STM32F769xx || STM32F777xx || STM32F779xx || STM32F750xx */ - -#if defined (STM32F722xx) || defined (STM32F723xx) || defined (STM32F732xx) || defined (STM32F733xx) || defined (STM32F730xx) -/** - * @brief Initializes the RCC extended peripherals clocks according to the specified - * parameters in the RCC_PeriphCLKInitTypeDef. - * @param PeriphClkInit pointer to an RCC_PeriphCLKInitTypeDef structure that - * contains the configuration information for the Extended Peripherals - * clocks(I2S, SAI, RTC, TIM, UARTs, USARTs, LTPIM, SDMMC...). - * - * @note Care must be taken when HAL_RCCEx_PeriphCLKConfig() is used to select - * the RTC clock source; in this case the Backup domain will be reset in - * order to modify the RTC Clock source, as consequence RTC registers (including - * the backup registers) are set to their reset values. - * - * @retval HAL status - */ -HAL_StatusTypeDef HAL_RCCEx_PeriphCLKConfig(RCC_PeriphCLKInitTypeDef *PeriphClkInit) -{ - uint32_t tickstart = 0; - uint32_t tmpreg0 = 0; - uint32_t plli2sused = 0; - uint32_t pllsaiused = 0; - - /* Check the parameters */ - assert_param(IS_RCC_PERIPHCLOCK(PeriphClkInit->PeriphClockSelection)); - - /*----------------------------------- I2S configuration ----------------------------------*/ - if(((PeriphClkInit->PeriphClockSelection) & RCC_PERIPHCLK_I2S) == (RCC_PERIPHCLK_I2S)) - { - /* Check the parameters */ - assert_param(IS_RCC_I2SCLKSOURCE(PeriphClkInit->I2sClockSelection)); - - /* Configure I2S Clock source */ - __HAL_RCC_I2S_CONFIG(PeriphClkInit->I2sClockSelection); - - /* Enable the PLLI2S when it's used as clock source for I2S */ - if(PeriphClkInit->I2sClockSelection == RCC_I2SCLKSOURCE_PLLI2S) - { - plli2sused = 1; - } - } - - /*------------------------------------ SAI1 configuration --------------------------------------*/ - if(((PeriphClkInit->PeriphClockSelection) & RCC_PERIPHCLK_SAI1) == (RCC_PERIPHCLK_SAI1)) - { - /* Check the parameters */ - assert_param(IS_RCC_SAI1CLKSOURCE(PeriphClkInit->Sai1ClockSelection)); - - /* Configure SAI1 Clock source */ - __HAL_RCC_SAI1_CONFIG(PeriphClkInit->Sai1ClockSelection); - /* Enable the PLLI2S when it's used as clock source for SAI */ - if(PeriphClkInit->Sai1ClockSelection == RCC_SAI1CLKSOURCE_PLLI2S) - { - plli2sused = 1; - } - /* Enable the PLLSAI when it's used as clock source for SAI */ - if(PeriphClkInit->Sai1ClockSelection == RCC_SAI1CLKSOURCE_PLLSAI) - { - pllsaiused = 1; - } - } - - /*------------------------------------ SAI2 configuration --------------------------------------*/ - if(((PeriphClkInit->PeriphClockSelection) & RCC_PERIPHCLK_SAI2) == (RCC_PERIPHCLK_SAI2)) - { - /* Check the parameters */ - assert_param(IS_RCC_SAI2CLKSOURCE(PeriphClkInit->Sai2ClockSelection)); - - /* Configure SAI2 Clock source */ - __HAL_RCC_SAI2_CONFIG(PeriphClkInit->Sai2ClockSelection); - - /* Enable the PLLI2S when it's used as clock source for SAI */ - if(PeriphClkInit->Sai2ClockSelection == RCC_SAI2CLKSOURCE_PLLI2S) - { - plli2sused = 1; - } - /* Enable the PLLSAI when it's used as clock source for SAI */ - if(PeriphClkInit->Sai2ClockSelection == RCC_SAI2CLKSOURCE_PLLSAI) - { - pllsaiused = 1; - } - } - - /*------------------------------------ RTC configuration --------------------------------------*/ - if(((PeriphClkInit->PeriphClockSelection) & RCC_PERIPHCLK_RTC) == (RCC_PERIPHCLK_RTC)) - { - /* Check for RTC Parameters used to output RTCCLK */ - assert_param(IS_RCC_RTCCLKSOURCE(PeriphClkInit->RTCClockSelection)); - - /* Enable Power Clock*/ - __HAL_RCC_PWR_CLK_ENABLE(); - - /* Enable write access to Backup domain */ - PWR->CR1 |= PWR_CR1_DBP; - - /* Get Start Tick*/ - tickstart = HAL_GetTick(); - - /* Wait for Backup domain Write protection disable */ - while((PWR->CR1 & PWR_CR1_DBP) == RESET) - { - if((HAL_GetTick() - tickstart) > RCC_DBP_TIMEOUT_VALUE) - { - return HAL_TIMEOUT; - } - } - - /* Reset the Backup domain only if the RTC Clock source selection is modified */ - tmpreg0 = (RCC->BDCR & RCC_BDCR_RTCSEL); - - if((tmpreg0 != 0x00000000U) && (tmpreg0 != (PeriphClkInit->RTCClockSelection & RCC_BDCR_RTCSEL))) - { - /* Store the content of BDCR register before the reset of Backup Domain */ - tmpreg0 = (RCC->BDCR & ~(RCC_BDCR_RTCSEL)); - - /* RTC Clock selection can be changed only if the Backup Domain is reset */ - __HAL_RCC_BACKUPRESET_FORCE(); - __HAL_RCC_BACKUPRESET_RELEASE(); - - /* Restore the Content of BDCR register */ - RCC->BDCR = tmpreg0; - - /* Wait for LSE reactivation if LSE was enable prior to Backup Domain reset */ - if (HAL_IS_BIT_SET(RCC->BDCR, RCC_BDCR_LSEON)) - { - /* Get Start Tick*/ - tickstart = HAL_GetTick(); - - /* Wait till LSE is ready */ - while(__HAL_RCC_GET_FLAG(RCC_FLAG_LSERDY) == RESET) - { - if((HAL_GetTick() - tickstart ) > RCC_LSE_TIMEOUT_VALUE) - { - return HAL_TIMEOUT; - } - } - } - } - __HAL_RCC_RTC_CONFIG(PeriphClkInit->RTCClockSelection); - } - - /*------------------------------------ TIM configuration --------------------------------------*/ - if(((PeriphClkInit->PeriphClockSelection) & RCC_PERIPHCLK_TIM) == (RCC_PERIPHCLK_TIM)) - { - /* Check the parameters */ - assert_param(IS_RCC_TIMPRES(PeriphClkInit->TIMPresSelection)); - - /* Configure Timer Prescaler */ - __HAL_RCC_TIMCLKPRESCALER(PeriphClkInit->TIMPresSelection); - } - - /*-------------------------------------- I2C1 Configuration -----------------------------------*/ - if(((PeriphClkInit->PeriphClockSelection) & RCC_PERIPHCLK_I2C1) == RCC_PERIPHCLK_I2C1) - { - /* Check the parameters */ - assert_param(IS_RCC_I2C1CLKSOURCE(PeriphClkInit->I2c1ClockSelection)); - - /* Configure the I2C1 clock source */ - __HAL_RCC_I2C1_CONFIG(PeriphClkInit->I2c1ClockSelection); - } - - /*-------------------------------------- I2C2 Configuration -----------------------------------*/ - if(((PeriphClkInit->PeriphClockSelection) & RCC_PERIPHCLK_I2C2) == RCC_PERIPHCLK_I2C2) - { - /* Check the parameters */ - assert_param(IS_RCC_I2C2CLKSOURCE(PeriphClkInit->I2c2ClockSelection)); - - /* Configure the I2C2 clock source */ - __HAL_RCC_I2C2_CONFIG(PeriphClkInit->I2c2ClockSelection); - } - - /*-------------------------------------- I2C3 Configuration -----------------------------------*/ - if(((PeriphClkInit->PeriphClockSelection) & RCC_PERIPHCLK_I2C3) == RCC_PERIPHCLK_I2C3) - { - /* Check the parameters */ - assert_param(IS_RCC_I2C3CLKSOURCE(PeriphClkInit->I2c3ClockSelection)); - - /* Configure the I2C3 clock source */ - __HAL_RCC_I2C3_CONFIG(PeriphClkInit->I2c3ClockSelection); - } - - /*-------------------------------------- USART1 Configuration -----------------------------------*/ - if(((PeriphClkInit->PeriphClockSelection) & RCC_PERIPHCLK_USART1) == RCC_PERIPHCLK_USART1) - { - /* Check the parameters */ - assert_param(IS_RCC_USART1CLKSOURCE(PeriphClkInit->Usart1ClockSelection)); - - /* Configure the USART1 clock source */ - __HAL_RCC_USART1_CONFIG(PeriphClkInit->Usart1ClockSelection); - } - - /*-------------------------------------- USART2 Configuration -----------------------------------*/ - if(((PeriphClkInit->PeriphClockSelection) & RCC_PERIPHCLK_USART2) == RCC_PERIPHCLK_USART2) - { - /* Check the parameters */ - assert_param(IS_RCC_USART2CLKSOURCE(PeriphClkInit->Usart2ClockSelection)); - - /* Configure the USART2 clock source */ - __HAL_RCC_USART2_CONFIG(PeriphClkInit->Usart2ClockSelection); - } - - /*-------------------------------------- USART3 Configuration -----------------------------------*/ - if(((PeriphClkInit->PeriphClockSelection) & RCC_PERIPHCLK_USART3) == RCC_PERIPHCLK_USART3) - { - /* Check the parameters */ - assert_param(IS_RCC_USART3CLKSOURCE(PeriphClkInit->Usart3ClockSelection)); - - /* Configure the USART3 clock source */ - __HAL_RCC_USART3_CONFIG(PeriphClkInit->Usart3ClockSelection); - } - - /*-------------------------------------- UART4 Configuration -----------------------------------*/ - if(((PeriphClkInit->PeriphClockSelection) & RCC_PERIPHCLK_UART4) == RCC_PERIPHCLK_UART4) - { - /* Check the parameters */ - assert_param(IS_RCC_UART4CLKSOURCE(PeriphClkInit->Uart4ClockSelection)); - - /* Configure the UART4 clock source */ - __HAL_RCC_UART4_CONFIG(PeriphClkInit->Uart4ClockSelection); - } - - /*-------------------------------------- UART5 Configuration -----------------------------------*/ - if(((PeriphClkInit->PeriphClockSelection) & RCC_PERIPHCLK_UART5) == RCC_PERIPHCLK_UART5) - { - /* Check the parameters */ - assert_param(IS_RCC_UART5CLKSOURCE(PeriphClkInit->Uart5ClockSelection)); - - /* Configure the UART5 clock source */ - __HAL_RCC_UART5_CONFIG(PeriphClkInit->Uart5ClockSelection); - } - - /*-------------------------------------- USART6 Configuration -----------------------------------*/ - if(((PeriphClkInit->PeriphClockSelection) & RCC_PERIPHCLK_USART6) == RCC_PERIPHCLK_USART6) - { - /* Check the parameters */ - assert_param(IS_RCC_USART6CLKSOURCE(PeriphClkInit->Usart6ClockSelection)); - - /* Configure the USART6 clock source */ - __HAL_RCC_USART6_CONFIG(PeriphClkInit->Usart6ClockSelection); - } - - /*-------------------------------------- UART7 Configuration -----------------------------------*/ - if(((PeriphClkInit->PeriphClockSelection) & RCC_PERIPHCLK_UART7) == RCC_PERIPHCLK_UART7) - { - /* Check the parameters */ - assert_param(IS_RCC_UART7CLKSOURCE(PeriphClkInit->Uart7ClockSelection)); - - /* Configure the UART7 clock source */ - __HAL_RCC_UART7_CONFIG(PeriphClkInit->Uart7ClockSelection); - } - - /*-------------------------------------- UART8 Configuration -----------------------------------*/ - if(((PeriphClkInit->PeriphClockSelection) & RCC_PERIPHCLK_UART8) == RCC_PERIPHCLK_UART8) - { - /* Check the parameters */ - assert_param(IS_RCC_UART8CLKSOURCE(PeriphClkInit->Uart8ClockSelection)); - - /* Configure the UART8 clock source */ - __HAL_RCC_UART8_CONFIG(PeriphClkInit->Uart8ClockSelection); - } - - /*-------------------------------------- CK48 Configuration -----------------------------------*/ - if(((PeriphClkInit->PeriphClockSelection) & RCC_PERIPHCLK_CLK48) == RCC_PERIPHCLK_CLK48) - { - /* Check the parameters */ - assert_param(IS_RCC_CLK48SOURCE(PeriphClkInit->Clk48ClockSelection)); - - /* Configure the CLK48 source */ - __HAL_RCC_CLK48_CONFIG(PeriphClkInit->Clk48ClockSelection); - - /* Enable the PLLSAI when it's used as clock source for CK48 */ - if(PeriphClkInit->Clk48ClockSelection == RCC_CLK48SOURCE_PLLSAIP) - { - pllsaiused = 1; - } - } - - /*-------------------------------------- LPTIM1 Configuration -----------------------------------*/ - if(((PeriphClkInit->PeriphClockSelection) & RCC_PERIPHCLK_LPTIM1) == RCC_PERIPHCLK_LPTIM1) - { - /* Check the parameters */ - assert_param(IS_RCC_LPTIM1CLK(PeriphClkInit->Lptim1ClockSelection)); - - /* Configure the LTPIM1 clock source */ - __HAL_RCC_LPTIM1_CONFIG(PeriphClkInit->Lptim1ClockSelection); - } - - /*------------------------------------- SDMMC1 Configuration ------------------------------------*/ - if(((PeriphClkInit->PeriphClockSelection) & RCC_PERIPHCLK_SDMMC1) == RCC_PERIPHCLK_SDMMC1) - { - /* Check the parameters */ - assert_param(IS_RCC_SDMMC1CLKSOURCE(PeriphClkInit->Sdmmc1ClockSelection)); - - /* Configure the SDMMC1 clock source */ - __HAL_RCC_SDMMC1_CONFIG(PeriphClkInit->Sdmmc1ClockSelection); - } - - /*------------------------------------- SDMMC2 Configuration ------------------------------------*/ - if(((PeriphClkInit->PeriphClockSelection) & RCC_PERIPHCLK_SDMMC2) == RCC_PERIPHCLK_SDMMC2) - { - /* Check the parameters */ - assert_param(IS_RCC_SDMMC2CLKSOURCE(PeriphClkInit->Sdmmc2ClockSelection)); - - /* Configure the SDMMC2 clock source */ - __HAL_RCC_SDMMC2_CONFIG(PeriphClkInit->Sdmmc2ClockSelection); - } - - /*-------------------------------------- PLLI2S Configuration ---------------------------------*/ - /* PLLI2S is configured when a peripheral will use it as source clock : SAI1, SAI2 or I2S */ - if((plli2sused == 1) || (PeriphClkInit->PeriphClockSelection == RCC_PERIPHCLK_PLLI2S)) - { - /* Disable the PLLI2S */ - __HAL_RCC_PLLI2S_DISABLE(); - - /* Get Start Tick*/ - tickstart = HAL_GetTick(); - - /* Wait till PLLI2S is disabled */ - while(__HAL_RCC_GET_FLAG(RCC_FLAG_PLLI2SRDY) != RESET) - { - if((HAL_GetTick() - tickstart) > PLLI2S_TIMEOUT_VALUE) - { - /* return in case of Timeout detected */ - return HAL_TIMEOUT; - } - } - - /* check for common PLLI2S Parameters */ - assert_param(IS_RCC_PLLI2SN_VALUE(PeriphClkInit->PLLI2S.PLLI2SN)); - - /*----------------- In Case of PLLI2S is selected as source clock for I2S -------------------*/ - if(((((PeriphClkInit->PeriphClockSelection) & RCC_PERIPHCLK_I2S) == RCC_PERIPHCLK_I2S) && (PeriphClkInit->I2sClockSelection == RCC_I2SCLKSOURCE_PLLI2S))) - { - /* check for Parameters */ - assert_param(IS_RCC_PLLI2SR_VALUE(PeriphClkInit->PLLI2S.PLLI2SR)); - - /* Read PLLI2SQ value from PLLI2SCFGR register (this value is not needed for I2S configuration) */ - tmpreg0 = ((RCC->PLLI2SCFGR & RCC_PLLI2SCFGR_PLLI2SQ) >> RCC_PLLI2SCFGR_PLLI2SQ_Pos); - /* Configure the PLLI2S division factors */ - /* PLLI2S_VCO = f(VCO clock) = f(PLLI2S clock input) x (PLLI2SN/PLLM) */ - /* I2SCLK = f(PLLI2S clock output) = f(VCO clock) / PLLI2SR */ - __HAL_RCC_PLLI2S_CONFIG(PeriphClkInit->PLLI2S.PLLI2SN , tmpreg0, PeriphClkInit->PLLI2S.PLLI2SR); - } - - /*----------------- In Case of PLLI2S is selected as source clock for SAI -------------------*/ - if(((((PeriphClkInit->PeriphClockSelection) & RCC_PERIPHCLK_SAI1) == RCC_PERIPHCLK_SAI1) && (PeriphClkInit->Sai1ClockSelection == RCC_SAI1CLKSOURCE_PLLI2S)) || - ((((PeriphClkInit->PeriphClockSelection) & RCC_PERIPHCLK_SAI2) == RCC_PERIPHCLK_SAI2) && (PeriphClkInit->Sai2ClockSelection == RCC_SAI2CLKSOURCE_PLLI2S))) - { - /* Check for PLLI2S Parameters */ - assert_param(IS_RCC_PLLI2SQ_VALUE(PeriphClkInit->PLLI2S.PLLI2SQ)); - /* Check for PLLI2S/DIVQ parameters */ - assert_param(IS_RCC_PLLI2S_DIVQ_VALUE(PeriphClkInit->PLLI2SDivQ)); - - /* Read PLLI2SP and PLLI2SR values from PLLI2SCFGR register (this value is not needed for SAI configuration) */ - tmpreg0 = ((RCC->PLLI2SCFGR & RCC_PLLI2SCFGR_PLLI2SR) >> RCC_PLLI2SCFGR_PLLI2SR_Pos); - /* Configure the PLLI2S division factors */ - /* PLLI2S_VCO Input = PLL_SOURCE/PLLM */ - /* PLLI2S_VCO Output = PLLI2S_VCO Input * PLLI2SN */ - /* SAI_CLK(first level) = PLLI2S_VCO Output/PLLI2SQ */ - __HAL_RCC_PLLI2S_CONFIG(PeriphClkInit->PLLI2S.PLLI2SN, PeriphClkInit->PLLI2S.PLLI2SQ, tmpreg0); - - /* SAI_CLK_x = SAI_CLK(first level)/PLLI2SDIVQ */ - __HAL_RCC_PLLI2S_PLLSAICLKDIVQ_CONFIG(PeriphClkInit->PLLI2SDivQ); - } - - /*----------------- In Case of PLLI2S is just selected -----------------*/ - if((PeriphClkInit->PeriphClockSelection & RCC_PERIPHCLK_PLLI2S) == RCC_PERIPHCLK_PLLI2S) - { - /* Check for Parameters */ - assert_param(IS_RCC_PLLI2SR_VALUE(PeriphClkInit->PLLI2S.PLLI2SR)); - assert_param(IS_RCC_PLLI2SQ_VALUE(PeriphClkInit->PLLI2S.PLLI2SQ)); - - /* Configure the PLLI2S division factors */ - /* PLLI2S_VCO = f(VCO clock) = f(PLLI2S clock input) x (PLLI2SN/PLLI2SM) */ - __HAL_RCC_PLLI2S_CONFIG(PeriphClkInit->PLLI2S.PLLI2SN , PeriphClkInit->PLLI2S.PLLI2SQ, PeriphClkInit->PLLI2S.PLLI2SR); - } - - /* Enable the PLLI2S */ - __HAL_RCC_PLLI2S_ENABLE(); - - /* Get Start Tick*/ - tickstart = HAL_GetTick(); - - /* Wait till PLLI2S is ready */ - while(__HAL_RCC_GET_FLAG(RCC_FLAG_PLLI2SRDY) == RESET) - { - if((HAL_GetTick() - tickstart) > PLLI2S_TIMEOUT_VALUE) - { - /* return in case of Timeout detected */ - return HAL_TIMEOUT; - } - } - } - - /*-------------------------------------- PLLSAI Configuration ---------------------------------*/ - /* PLLSAI is configured when a peripheral will use it as source clock : SAI1, SAI2, LTDC or CK48 */ - if(pllsaiused == 1) - { - /* Disable PLLSAI Clock */ - __HAL_RCC_PLLSAI_DISABLE(); - - /* Get Start Tick*/ - tickstart = HAL_GetTick(); - - /* Wait till PLLSAI is disabled */ - while(__HAL_RCC_PLLSAI_GET_FLAG() != RESET) - { - if((HAL_GetTick() - tickstart) > PLLSAI_TIMEOUT_VALUE) - { - /* return in case of Timeout detected */ - return HAL_TIMEOUT; - } - } - - /* Check the PLLSAI division factors */ - assert_param(IS_RCC_PLLSAIN_VALUE(PeriphClkInit->PLLSAI.PLLSAIN)); - - /*----------------- In Case of PLLSAI is selected as source clock for SAI -------------------*/ - if(((((PeriphClkInit->PeriphClockSelection) & RCC_PERIPHCLK_SAI1) == RCC_PERIPHCLK_SAI1) && (PeriphClkInit->Sai1ClockSelection == RCC_SAI1CLKSOURCE_PLLSAI)) ||\ - ((((PeriphClkInit->PeriphClockSelection) & RCC_PERIPHCLK_SAI2) == RCC_PERIPHCLK_SAI2) && (PeriphClkInit->Sai2ClockSelection == RCC_SAI2CLKSOURCE_PLLSAI))) - { - /* check for PLLSAIQ Parameter */ - assert_param(IS_RCC_PLLSAIQ_VALUE(PeriphClkInit->PLLSAI.PLLSAIQ)); - /* check for PLLSAI/DIVQ Parameter */ - assert_param(IS_RCC_PLLSAI_DIVQ_VALUE(PeriphClkInit->PLLSAIDivQ)); - - /* Read PLLSAIP value from PLLSAICFGR register (this value is not needed for SAI configuration) */ - tmpreg0 = ((RCC->PLLSAICFGR & RCC_PLLSAICFGR_PLLSAIP) >> RCC_PLLSAICFGR_PLLSAIP_Pos); - /* PLLSAI_VCO Input = PLL_SOURCE/PLLM */ - /* PLLSAI_VCO Output = PLLSAI_VCO Input * PLLSAIN */ - /* SAI_CLK(first level) = PLLSAI_VCO Output/PLLSAIQ */ - __HAL_RCC_PLLSAI_CONFIG(PeriphClkInit->PLLSAI.PLLSAIN , tmpreg0, PeriphClkInit->PLLSAI.PLLSAIQ); - - /* SAI_CLK_x = SAI_CLK(first level)/PLLSAIDIVQ */ - __HAL_RCC_PLLSAI_PLLSAICLKDIVQ_CONFIG(PeriphClkInit->PLLSAIDivQ); - } - - /*----------------- In Case of PLLSAI is selected as source clock for CLK48 -------------------*/ - /* In Case of PLLI2S is selected as source clock for CK48 */ - if((((PeriphClkInit->PeriphClockSelection) & RCC_PERIPHCLK_CLK48) == RCC_PERIPHCLK_CLK48) && (PeriphClkInit->Clk48ClockSelection == RCC_CLK48SOURCE_PLLSAIP)) - { - /* check for Parameters */ - assert_param(IS_RCC_PLLSAIP_VALUE(PeriphClkInit->PLLSAI.PLLSAIP)); - /* Read PLLSAIQ and PLLSAIR value from PLLSAICFGR register (this value is not needed for CK48 configuration) */ - tmpreg0 = ((RCC->PLLSAICFGR & RCC_PLLSAICFGR_PLLSAIQ) >> RCC_PLLSAICFGR_PLLSAIQ_Pos); - - /* Configure the PLLSAI division factors */ - /* PLLSAI_VCO = f(VCO clock) = f(PLLSAI clock input) x (PLLI2SN/PLLM) */ - /* 48CLK = f(PLLSAI clock output) = f(VCO clock) / PLLSAIP */ - __HAL_RCC_PLLSAI_CONFIG(PeriphClkInit->PLLSAI.PLLSAIN , PeriphClkInit->PLLSAI.PLLSAIP, tmpreg0); - } - - /* Enable PLLSAI Clock */ - __HAL_RCC_PLLSAI_ENABLE(); - - /* Get Start Tick*/ - tickstart = HAL_GetTick(); - - /* Wait till PLLSAI is ready */ - while(__HAL_RCC_PLLSAI_GET_FLAG() == RESET) - { - if((HAL_GetTick() - tickstart) > PLLSAI_TIMEOUT_VALUE) - { - /* return in case of Timeout detected */ - return HAL_TIMEOUT; - } - } - } - return HAL_OK; -} - -/** - * @brief Get the RCC_PeriphCLKInitTypeDef according to the internal - * RCC configuration registers. - * @param PeriphClkInit pointer to the configured RCC_PeriphCLKInitTypeDef structure - * @retval None - */ -void HAL_RCCEx_GetPeriphCLKConfig(RCC_PeriphCLKInitTypeDef *PeriphClkInit) -{ - uint32_t tempreg = 0; - - /* Set all possible values for the extended clock type parameter------------*/ - PeriphClkInit->PeriphClockSelection = RCC_PERIPHCLK_I2S | RCC_PERIPHCLK_LPTIM1 |\ - RCC_PERIPHCLK_SAI1 | RCC_PERIPHCLK_SAI2 |\ - RCC_PERIPHCLK_TIM | RCC_PERIPHCLK_RTC |\ - RCC_PERIPHCLK_I2C1 | RCC_PERIPHCLK_I2C2 |\ - RCC_PERIPHCLK_I2C3 | RCC_PERIPHCLK_USART1 |\ - RCC_PERIPHCLK_USART2 | RCC_PERIPHCLK_USART3 |\ - RCC_PERIPHCLK_UART4 | RCC_PERIPHCLK_UART5 |\ - RCC_PERIPHCLK_USART6 | RCC_PERIPHCLK_UART7 |\ - RCC_PERIPHCLK_UART8 | RCC_PERIPHCLK_SDMMC1 |\ - RCC_PERIPHCLK_CLK48 | RCC_PERIPHCLK_SDMMC2; - - /* Get the PLLI2S Clock configuration -----------------------------------------------*/ - PeriphClkInit->PLLI2S.PLLI2SN = (uint32_t)((RCC->PLLI2SCFGR & RCC_PLLI2SCFGR_PLLI2SN) >> RCC_PLLI2SCFGR_PLLI2SN_Pos); - PeriphClkInit->PLLI2S.PLLI2SQ = (uint32_t)((RCC->PLLI2SCFGR & RCC_PLLI2SCFGR_PLLI2SQ) >> RCC_PLLI2SCFGR_PLLI2SQ_Pos); - PeriphClkInit->PLLI2S.PLLI2SR = (uint32_t)((RCC->PLLI2SCFGR & RCC_PLLI2SCFGR_PLLI2SR) >> RCC_PLLI2SCFGR_PLLI2SR_Pos); - - /* Get the PLLSAI Clock configuration -----------------------------------------------*/ - PeriphClkInit->PLLSAI.PLLSAIN = (uint32_t)((RCC->PLLSAICFGR & RCC_PLLSAICFGR_PLLSAIN) >> RCC_PLLSAICFGR_PLLSAIN_Pos); - PeriphClkInit->PLLSAI.PLLSAIP = (uint32_t)((RCC->PLLSAICFGR & RCC_PLLSAICFGR_PLLSAIP) >> RCC_PLLSAICFGR_PLLSAIP_Pos); - PeriphClkInit->PLLSAI.PLLSAIQ = (uint32_t)((RCC->PLLSAICFGR & RCC_PLLSAICFGR_PLLSAIQ) >> RCC_PLLSAICFGR_PLLSAIQ_Pos); - - /* Get the PLLSAI/PLLI2S division factors -------------------------------------------*/ - PeriphClkInit->PLLI2SDivQ = (uint32_t)((RCC->DCKCFGR1 & RCC_DCKCFGR1_PLLI2SDIVQ) >> RCC_DCKCFGR1_PLLI2SDIVQ_Pos); - PeriphClkInit->PLLSAIDivQ = (uint32_t)((RCC->DCKCFGR1 & RCC_DCKCFGR1_PLLSAIDIVQ) >> RCC_DCKCFGR1_PLLSAIDIVQ_Pos); - - /* Get the SAI1 clock configuration ----------------------------------------------*/ - PeriphClkInit->Sai1ClockSelection = __HAL_RCC_GET_SAI1_SOURCE(); - - /* Get the SAI2 clock configuration ----------------------------------------------*/ - PeriphClkInit->Sai2ClockSelection = __HAL_RCC_GET_SAI2_SOURCE(); - - /* Get the I2S clock configuration ------------------------------------------*/ - PeriphClkInit->I2sClockSelection = __HAL_RCC_GET_I2SCLKSOURCE(); - - /* Get the I2C1 clock configuration ------------------------------------------*/ - PeriphClkInit->I2c1ClockSelection = __HAL_RCC_GET_I2C1_SOURCE(); - - /* Get the I2C2 clock configuration ------------------------------------------*/ - PeriphClkInit->I2c2ClockSelection = __HAL_RCC_GET_I2C2_SOURCE(); - - /* Get the I2C3 clock configuration ------------------------------------------*/ - PeriphClkInit->I2c3ClockSelection = __HAL_RCC_GET_I2C3_SOURCE(); - - /* Get the USART1 clock configuration ------------------------------------------*/ - PeriphClkInit->Usart1ClockSelection = __HAL_RCC_GET_USART1_SOURCE(); - - /* Get the USART2 clock configuration ------------------------------------------*/ - PeriphClkInit->Usart2ClockSelection = __HAL_RCC_GET_USART2_SOURCE(); - - /* Get the USART3 clock configuration ------------------------------------------*/ - PeriphClkInit->Usart3ClockSelection = __HAL_RCC_GET_USART3_SOURCE(); - - /* Get the UART4 clock configuration ------------------------------------------*/ - PeriphClkInit->Uart4ClockSelection = __HAL_RCC_GET_UART4_SOURCE(); - - /* Get the UART5 clock configuration ------------------------------------------*/ - PeriphClkInit->Uart5ClockSelection = __HAL_RCC_GET_UART5_SOURCE(); - - /* Get the USART6 clock configuration ------------------------------------------*/ - PeriphClkInit->Usart6ClockSelection = __HAL_RCC_GET_USART6_SOURCE(); - - /* Get the UART7 clock configuration ------------------------------------------*/ - PeriphClkInit->Uart7ClockSelection = __HAL_RCC_GET_UART7_SOURCE(); - - /* Get the UART8 clock configuration ------------------------------------------*/ - PeriphClkInit->Uart8ClockSelection = __HAL_RCC_GET_UART8_SOURCE(); - - /* Get the LPTIM1 clock configuration ------------------------------------------*/ - PeriphClkInit->Lptim1ClockSelection = __HAL_RCC_GET_LPTIM1_SOURCE(); - - /* Get the CK48 clock configuration -----------------------------------------------*/ - PeriphClkInit->Clk48ClockSelection = __HAL_RCC_GET_CLK48_SOURCE(); - - /* Get the SDMMC1 clock configuration -----------------------------------------------*/ - PeriphClkInit->Sdmmc1ClockSelection = __HAL_RCC_GET_SDMMC1_SOURCE(); - - /* Get the SDMMC2 clock configuration -----------------------------------------------*/ - PeriphClkInit->Sdmmc2ClockSelection = __HAL_RCC_GET_SDMMC2_SOURCE(); - - /* Get the RTC Clock configuration -----------------------------------------------*/ - tempreg = (RCC->CFGR & RCC_CFGR_RTCPRE); - PeriphClkInit->RTCClockSelection = (uint32_t)((tempreg) | (RCC->BDCR & RCC_BDCR_RTCSEL)); - - /* Get the TIM Prescaler configuration --------------------------------------------*/ - if ((RCC->DCKCFGR1 & RCC_DCKCFGR1_TIMPRE) == RESET) - { - PeriphClkInit->TIMPresSelection = RCC_TIMPRES_DESACTIVATED; - } - else - { - PeriphClkInit->TIMPresSelection = RCC_TIMPRES_ACTIVATED; - } -} -#endif /* STM32F722xx || STM32F723xx || STM32F732xx || STM32F733xx || STM32F730xx */ - -/** - * @brief Return the peripheral clock frequency for a given peripheral(SAI..) - * @note Return 0 if peripheral clock identifier not managed by this API - * @param PeriphClk Peripheral clock identifier - * This parameter can be one of the following values: - * @arg RCC_PERIPHCLK_SAI1: SAI1 peripheral clock - * @arg RCC_PERIPHCLK_SAI2: SAI2 peripheral clock - * @retval Frequency in KHz - */ -uint32_t HAL_RCCEx_GetPeriphCLKFreq(uint32_t PeriphClk) -{ - uint32_t tmpreg = 0; - /* This variable is used to store the SAI clock frequency (value in Hz) */ - uint32_t frequency = 0; - /* This variable is used to store the VCO Input (value in Hz) */ - uint32_t vcoinput = 0; - /* This variable is used to store the SAI clock source */ - uint32_t saiclocksource = 0; - - if (PeriphClk == RCC_PERIPHCLK_SAI1) - { - saiclocksource = RCC->DCKCFGR1; - saiclocksource &= RCC_DCKCFGR1_SAI1SEL; - switch (saiclocksource) - { - case 0: /* PLLSAI is the clock source for SAI1 */ - { - /* Configure the PLLSAI division factor */ - /* PLLSAI_VCO Input = PLL_SOURCE/PLLM */ - if((RCC->PLLCFGR & RCC_PLLCFGR_PLLSRC) == RCC_PLLSOURCE_HSI) - { - /* In Case the PLL Source is HSI (Internal Clock) */ - vcoinput = (HSI_VALUE / (uint32_t)(RCC->PLLCFGR & RCC_PLLCFGR_PLLM)); - } - else - { - /* In Case the PLL Source is HSE (External Clock) */ - vcoinput = ((HSE_VALUE / (uint32_t)(RCC->PLLCFGR & RCC_PLLCFGR_PLLM))); - } - /* PLLSAI_VCO Output = PLLSAI_VCO Input * PLLSAIN */ - /* SAI_CLK(first level) = PLLSAI_VCO Output/PLLSAIQ */ - tmpreg = (RCC->PLLSAICFGR & RCC_PLLSAICFGR_PLLSAIQ) >> 24; - frequency = (vcoinput * ((RCC->PLLSAICFGR & RCC_PLLSAICFGR_PLLSAIN) >> 6))/(tmpreg); - - /* SAI_CLK_x = SAI_CLK(first level)/PLLSAIDIVQ */ - tmpreg = (((RCC->DCKCFGR1 & RCC_DCKCFGR1_PLLSAIDIVQ) >> 8) + 1); - frequency = frequency/(tmpreg); - break; - } - case RCC_DCKCFGR1_SAI1SEL_0: /* PLLI2S is the clock source for SAI1 */ - { - /* Configure the PLLI2S division factor */ - /* PLLI2S_VCO Input = PLL_SOURCE/PLLM */ - if((RCC->PLLCFGR & RCC_PLLCFGR_PLLSRC) == RCC_PLLSOURCE_HSI) - { - /* In Case the PLL Source is HSI (Internal Clock) */ - vcoinput = (HSI_VALUE / (uint32_t)(RCC->PLLCFGR & RCC_PLLCFGR_PLLM)); - } - else - { - /* In Case the PLL Source is HSE (External Clock) */ - vcoinput = ((HSE_VALUE / (uint32_t)(RCC->PLLCFGR & RCC_PLLCFGR_PLLM))); - } - - /* PLLI2S_VCO Output = PLLI2S_VCO Input * PLLI2SN */ - /* SAI_CLK(first level) = PLLI2S_VCO Output/PLLI2SQ */ - tmpreg = (RCC->PLLI2SCFGR & RCC_PLLI2SCFGR_PLLI2SQ) >> 24; - frequency = (vcoinput * ((RCC->PLLI2SCFGR & RCC_PLLI2SCFGR_PLLI2SN) >> 6))/(tmpreg); - - /* SAI_CLK_x = SAI_CLK(first level)/PLLI2SDIVQ */ - tmpreg = ((RCC->DCKCFGR1 & RCC_DCKCFGR1_PLLI2SDIVQ) + 1); - frequency = frequency/(tmpreg); - break; - } - case RCC_DCKCFGR1_SAI1SEL_1: /* External clock is the clock source for SAI1 */ - { - frequency = EXTERNAL_CLOCK_VALUE; - break; - } -#if defined (STM32F765xx) || defined (STM32F767xx) || defined (STM32F769xx) || defined (STM32F777xx) || defined (STM32F779xx) - case RCC_DCKCFGR1_SAI1SEL: /* HSI or HSE is the clock source for SAI*/ - { - if((RCC->PLLCFGR & RCC_PLLCFGR_PLLSRC) == RCC_PLLSOURCE_HSI) - { - /* In Case the main PLL Source is HSI */ - frequency = HSI_VALUE; - } - else - { - /* In Case the main PLL Source is HSE */ - frequency = HSE_VALUE; - } - break; - } -#endif /* STM32F767xx || STM32F769xx || STM32F777xx || STM32F779xx */ - default : - { - break; - } - } - } - - if (PeriphClk == RCC_PERIPHCLK_SAI2) - { - saiclocksource = RCC->DCKCFGR1; - saiclocksource &= RCC_DCKCFGR1_SAI2SEL; - switch (saiclocksource) - { - case 0: /* PLLSAI is the clock source for SAI*/ - { - /* Configure the PLLSAI division factor */ - /* PLLSAI_VCO Input = PLL_SOURCE/PLLM */ - if((RCC->PLLCFGR & RCC_PLLCFGR_PLLSRC) == RCC_PLLSOURCE_HSI) - { - /* In Case the PLL Source is HSI (Internal Clock) */ - vcoinput = (HSI_VALUE / (uint32_t)(RCC->PLLCFGR & RCC_PLLCFGR_PLLM)); - } - else - { - /* In Case the PLL Source is HSE (External Clock) */ - vcoinput = ((HSE_VALUE / (uint32_t)(RCC->PLLCFGR & RCC_PLLCFGR_PLLM))); - } - /* PLLSAI_VCO Output = PLLSAI_VCO Input * PLLSAIN */ - /* SAI_CLK(first level) = PLLSAI_VCO Output/PLLSAIQ */ - tmpreg = (RCC->PLLSAICFGR & RCC_PLLSAICFGR_PLLSAIQ) >> 24; - frequency = (vcoinput * ((RCC->PLLSAICFGR & RCC_PLLSAICFGR_PLLSAIN) >> 6))/(tmpreg); - - /* SAI_CLK_x = SAI_CLK(first level)/PLLSAIDIVQ */ - tmpreg = (((RCC->DCKCFGR1 & RCC_DCKCFGR1_PLLSAIDIVQ) >> 8) + 1); - frequency = frequency/(tmpreg); - break; - } - case RCC_DCKCFGR1_SAI2SEL_0: /* PLLI2S is the clock source for SAI2 */ - { - /* Configure the PLLI2S division factor */ - /* PLLI2S_VCO Input = PLL_SOURCE/PLLM */ - if((RCC->PLLCFGR & RCC_PLLCFGR_PLLSRC) == RCC_PLLSOURCE_HSI) - { - /* In Case the PLL Source is HSI (Internal Clock) */ - vcoinput = (HSI_VALUE / (uint32_t)(RCC->PLLCFGR & RCC_PLLCFGR_PLLM)); - } - else - { - /* In Case the PLL Source is HSE (External Clock) */ - vcoinput = ((HSE_VALUE / (uint32_t)(RCC->PLLCFGR & RCC_PLLCFGR_PLLM))); - } - - /* PLLI2S_VCO Output = PLLI2S_VCO Input * PLLI2SN */ - /* SAI_CLK(first level) = PLLI2S_VCO Output/PLLI2SQ */ - tmpreg = (RCC->PLLI2SCFGR & RCC_PLLI2SCFGR_PLLI2SQ) >> 24; - frequency = (vcoinput * ((RCC->PLLI2SCFGR & RCC_PLLI2SCFGR_PLLI2SN) >> 6))/(tmpreg); - - /* SAI_CLK_x = SAI_CLK(first level)/PLLI2SDIVQ */ - tmpreg = ((RCC->DCKCFGR1 & RCC_DCKCFGR1_PLLI2SDIVQ) + 1); - frequency = frequency/(tmpreg); - break; - } - case RCC_DCKCFGR1_SAI2SEL_1: /* External clock is the clock source for SAI2 */ - { - frequency = EXTERNAL_CLOCK_VALUE; - break; - } -#if defined (STM32F765xx) || defined (STM32F767xx) || defined (STM32F769xx) || defined (STM32F777xx) || defined (STM32F779xx) - case RCC_DCKCFGR1_SAI2SEL: /* HSI or HSE is the clock source for SAI2 */ - { - if((RCC->PLLCFGR & RCC_PLLCFGR_PLLSRC) == RCC_PLLSOURCE_HSI) - { - /* In Case the main PLL Source is HSI */ - frequency = HSI_VALUE; - } - else - { - /* In Case the main PLL Source is HSE */ - frequency = HSE_VALUE; - } - break; - } -#endif /* STM32F767xx || STM32F769xx || STM32F777xx || STM32F779xx */ - default : - { - break; - } - } - } - - return frequency; -} - -/** - * @} - */ - -/** @defgroup RCCEx_Exported_Functions_Group2 Extended Clock management functions - * @brief Extended Clock management functions - * -@verbatim - =============================================================================== - ##### Extended clock management functions ##### - =============================================================================== - [..] - This subsection provides a set of functions allowing to control the - activation or deactivation of PLLI2S, PLLSAI. -@endverbatim - * @{ - */ - -/** - * @brief Enable PLLI2S. - * @param PLLI2SInit pointer to an RCC_PLLI2SInitTypeDef structure that - * contains the configuration information for the PLLI2S - * @retval HAL status - */ -HAL_StatusTypeDef HAL_RCCEx_EnablePLLI2S(RCC_PLLI2SInitTypeDef *PLLI2SInit) -{ - uint32_t tickstart; - - /* Check for parameters */ - assert_param(IS_RCC_PLLI2SN_VALUE(PLLI2SInit->PLLI2SN)); - assert_param(IS_RCC_PLLI2SR_VALUE(PLLI2SInit->PLLI2SR)); - assert_param(IS_RCC_PLLI2SQ_VALUE(PLLI2SInit->PLLI2SQ)); -#if defined(RCC_PLLI2SCFGR_PLLI2SP) - assert_param(IS_RCC_PLLI2SP_VALUE(PLLI2SInit->PLLI2SP)); -#endif /* RCC_PLLI2SCFGR_PLLI2SP */ - - /* Disable the PLLI2S */ - __HAL_RCC_PLLI2S_DISABLE(); - - /* Wait till PLLI2S is disabled */ - tickstart = HAL_GetTick(); - while(__HAL_RCC_GET_FLAG(RCC_FLAG_PLLI2SRDY) != RESET) - { - if((HAL_GetTick() - tickstart ) > PLLI2S_TIMEOUT_VALUE) - { - /* return in case of Timeout detected */ - return HAL_TIMEOUT; - } - } - - /* Configure the PLLI2S division factors */ -#if defined (STM32F722xx) || defined (STM32F723xx) || defined (STM32F732xx) || defined (STM32F733xx) || defined (STM32F730xx) - /* PLLI2S_VCO = f(VCO clock) = f(PLLI2S clock input) * PLLI2SN */ - /* I2SQCLK = PLLI2S_VCO / PLLI2SQ */ - /* I2SRCLK = PLLI2S_VCO / PLLI2SR */ - __HAL_RCC_PLLI2S_CONFIG(PLLI2SInit->PLLI2SN, PLLI2SInit->PLLI2SQ, PLLI2SInit->PLLI2SR); -#else - /* PLLI2S_VCO = f(VCO clock) = f(PLLI2S clock input) * PLLI2SN */ - /* I2SPCLK = PLLI2S_VCO / PLLI2SP */ - /* I2SQCLK = PLLI2S_VCO / PLLI2SQ */ - /* I2SRCLK = PLLI2S_VCO / PLLI2SR */ - __HAL_RCC_PLLI2S_CONFIG(PLLI2SInit->PLLI2SN, PLLI2SInit->PLLI2SP, PLLI2SInit->PLLI2SQ, PLLI2SInit->PLLI2SR); -#endif /* STM32F722xx || STM32F723xx || STM32F732xx || STM32F733xx || STM32F730xx */ - - /* Enable the PLLI2S */ - __HAL_RCC_PLLI2S_ENABLE(); - - /* Wait till PLLI2S is ready */ - tickstart = HAL_GetTick(); - while(__HAL_RCC_GET_FLAG(RCC_FLAG_PLLI2SRDY) == RESET) - { - if((HAL_GetTick() - tickstart ) > PLLI2S_TIMEOUT_VALUE) - { - /* return in case of Timeout detected */ - return HAL_TIMEOUT; - } - } - - return HAL_OK; -} - -/** - * @brief Disable PLLI2S. - * @retval HAL status - */ -HAL_StatusTypeDef HAL_RCCEx_DisablePLLI2S(void) -{ - uint32_t tickstart; - - /* Disable the PLLI2S */ - __HAL_RCC_PLLI2S_DISABLE(); - - /* Wait till PLLI2S is disabled */ - tickstart = HAL_GetTick(); - while(READ_BIT(RCC->CR, RCC_CR_PLLI2SRDY) != RESET) - { - if((HAL_GetTick() - tickstart) > PLLI2S_TIMEOUT_VALUE) - { - /* return in case of Timeout detected */ - return HAL_TIMEOUT; - } - } - - return HAL_OK; -} - -/** - * @brief Enable PLLSAI. - * @param PLLSAIInit pointer to an RCC_PLLSAIInitTypeDef structure that - * contains the configuration information for the PLLSAI - * @retval HAL status - */ -HAL_StatusTypeDef HAL_RCCEx_EnablePLLSAI(RCC_PLLSAIInitTypeDef *PLLSAIInit) -{ - uint32_t tickstart; - - /* Check for parameters */ - assert_param(IS_RCC_PLLSAIN_VALUE(PLLSAIInit->PLLSAIN)); - assert_param(IS_RCC_PLLSAIQ_VALUE(PLLSAIInit->PLLSAIQ)); - assert_param(IS_RCC_PLLSAIP_VALUE(PLLSAIInit->PLLSAIP)); -#if defined(RCC_PLLSAICFGR_PLLSAIR) - assert_param(IS_RCC_PLLSAIR_VALUE(PLLSAIInit->PLLSAIR)); -#endif /* RCC_PLLSAICFGR_PLLSAIR */ - - /* Disable the PLLSAI */ - __HAL_RCC_PLLSAI_DISABLE(); - - /* Wait till PLLSAI is disabled */ - tickstart = HAL_GetTick(); - while(__HAL_RCC_PLLSAI_GET_FLAG() != RESET) - { - if((HAL_GetTick() - tickstart ) > PLLSAI_TIMEOUT_VALUE) - { - /* return in case of Timeout detected */ - return HAL_TIMEOUT; - } - } - - /* Configure the PLLSAI division factors */ -#if defined (STM32F722xx) || defined (STM32F723xx) || defined (STM32F732xx) || defined (STM32F733xx) || defined (STM32F730xx) - /* PLLSAI_VCO = f(VCO clock) = f(PLLSAI clock input) * PLLSAIN */ - /* SAIPCLK = PLLSAI_VCO / PLLSAIP */ - /* SAIQCLK = PLLSAI_VCO / PLLSAIQ */ - __HAL_RCC_PLLSAI_CONFIG(PLLSAIInit->PLLSAIN, PLLSAIInit->PLLSAIP, PLLSAIInit->PLLSAIQ); -#else - /* PLLSAI_VCO = f(VCO clock) = f(PLLSAI clock input) * PLLSAIN */ - /* SAIPCLK = PLLSAI_VCO / PLLSAIP */ - /* SAIQCLK = PLLSAI_VCO / PLLSAIQ */ - /* SAIRCLK = PLLSAI_VCO / PLLSAIR */ - __HAL_RCC_PLLSAI_CONFIG(PLLSAIInit->PLLSAIN, PLLSAIInit->PLLSAIP, \ - PLLSAIInit->PLLSAIQ, PLLSAIInit->PLLSAIR); -#endif /* STM32F722xx || STM32F723xx || STM32F732xx || STM32F733xx || STM32F730xx */ - - /* Enable the PLLSAI */ - __HAL_RCC_PLLSAI_ENABLE(); - - /* Wait till PLLSAI is ready */ - tickstart = HAL_GetTick(); - while(__HAL_RCC_PLLSAI_GET_FLAG() == RESET) - { - if((HAL_GetTick() - tickstart ) > PLLSAI_TIMEOUT_VALUE) - { - /* return in case of Timeout detected */ - return HAL_TIMEOUT; - } - } - - return HAL_OK; -} - -/** - * @brief Disable PLLSAI. - * @retval HAL status - */ -HAL_StatusTypeDef HAL_RCCEx_DisablePLLSAI(void) -{ - uint32_t tickstart; - - /* Disable the PLLSAI */ - __HAL_RCC_PLLSAI_DISABLE(); - - /* Wait till PLLSAI is disabled */ - tickstart = HAL_GetTick(); - while(__HAL_RCC_PLLSAI_GET_FLAG() != RESET) - { - if((HAL_GetTick() - tickstart) > PLLSAI_TIMEOUT_VALUE) - { - /* return in case of Timeout detected */ - return HAL_TIMEOUT; - } - } - - return HAL_OK; -} - -/** - * @} - */ - -/** - * @} - */ - -#endif /* HAL_RCC_MODULE_ENABLED */ -/** - * @} - */ - -/** - * @} - */ - -/************************ (C) COPYRIGHT STMicroelectronics *****END OF FILE****/ diff --git a/test_dma/Drivers/STM32F7xx_HAL_Driver/Src/stm32f7xx_hal_tim.c b/test_dma/Drivers/STM32F7xx_HAL_Driver/Src/stm32f7xx_hal_tim.c deleted file mode 100644 index c467692..0000000 --- a/test_dma/Drivers/STM32F7xx_HAL_Driver/Src/stm32f7xx_hal_tim.c +++ /dev/null @@ -1,6880 +0,0 @@ -/** - ****************************************************************************** - * @file stm32f7xx_hal_tim.c - * @author MCD Application Team - * @brief TIM HAL module driver. - * This file provides firmware functions to manage the following - * functionalities of the Timer (TIM) peripheral: - * + TIM Time Base Initialization - * + TIM Time Base Start - * + TIM Time Base Start Interruption - * + TIM Time Base Start DMA - * + TIM Output Compare/PWM Initialization - * + TIM Output Compare/PWM Channel Configuration - * + TIM Output Compare/PWM Start - * + TIM Output Compare/PWM Start Interruption - * + TIM Output Compare/PWM Start DMA - * + TIM Input Capture Initialization - * + TIM Input Capture Channel Configuration - * + TIM Input Capture Start - * + TIM Input Capture Start Interruption - * + TIM Input Capture Start DMA - * + TIM One Pulse Initialization - * + TIM One Pulse Channel Configuration - * + TIM One Pulse Start - * + TIM Encoder Interface Initialization - * + TIM Encoder Interface Start - * + TIM Encoder Interface Start Interruption - * + TIM Encoder Interface Start DMA - * + Commutation Event configuration with Interruption and DMA - * + TIM OCRef clear configuration - * + TIM External Clock configuration - @verbatim - ============================================================================== - ##### TIMER Generic features ##### - ============================================================================== - [..] The Timer features include: - (#) 16-bit up, down, up/down auto-reload counter. - (#) 16-bit programmable prescaler allowing dividing (also on the fly) the - counter clock frequency either by any factor between 1 and 65536. - (#) Up to 4 independent channels for: - (++) Input Capture - (++) Output Compare - (++) PWM generation (Edge and Center-aligned Mode) - (++) One-pulse mode output - (#) Synchronization circuit to control the timer with external signals and to interconnect - several timers together. - (#) Supports incremental encoder for positioning purposes - - ##### How to use this driver ##### - ============================================================================== - [..] - (#) Initialize the TIM low level resources by implementing the following functions - depending on the selected feature: - (++) Time Base : HAL_TIM_Base_MspInit() - (++) Input Capture : HAL_TIM_IC_MspInit() - (++) Output Compare : HAL_TIM_OC_MspInit() - (++) PWM generation : HAL_TIM_PWM_MspInit() - (++) One-pulse mode output : HAL_TIM_OnePulse_MspInit() - (++) Encoder mode output : HAL_TIM_Encoder_MspInit() - - (#) Initialize the TIM low level resources : - (##) Enable the TIM interface clock using __HAL_RCC_TIMx_CLK_ENABLE(); - (##) TIM pins configuration - (+++) Enable the clock for the TIM GPIOs using the following function: - __HAL_RCC_GPIOx_CLK_ENABLE(); - (+++) Configure these TIM pins in Alternate function mode using HAL_GPIO_Init(); - - (#) The external Clock can be configured, if needed (the default clock is the - internal clock from the APBx), using the following function: - HAL_TIM_ConfigClockSource, the clock configuration should be done before - any start function. - - (#) Configure the TIM in the desired functioning mode using one of the - Initialization function of this driver: - (++) HAL_TIM_Base_Init: to use the Timer to generate a simple time base - (++) HAL_TIM_OC_Init and HAL_TIM_OC_ConfigChannel: to use the Timer to generate an - Output Compare signal. - (++) HAL_TIM_PWM_Init and HAL_TIM_PWM_ConfigChannel: to use the Timer to generate a - PWM signal. - (++) HAL_TIM_IC_Init and HAL_TIM_IC_ConfigChannel: to use the Timer to measure an - external signal. - (++) HAL_TIM_OnePulse_Init and HAL_TIM_OnePulse_ConfigChannel: to use the Timer - in One Pulse Mode. - (++) HAL_TIM_Encoder_Init: to use the Timer Encoder Interface. - - (#) Activate the TIM peripheral using one of the start functions depending from the feature used: - (++) Time Base : HAL_TIM_Base_Start(), HAL_TIM_Base_Start_DMA(), HAL_TIM_Base_Start_IT() - (++) Input Capture : HAL_TIM_IC_Start(), HAL_TIM_IC_Start_DMA(), HAL_TIM_IC_Start_IT() - (++) Output Compare : HAL_TIM_OC_Start(), HAL_TIM_OC_Start_DMA(), HAL_TIM_OC_Start_IT() - (++) PWM generation : HAL_TIM_PWM_Start(), HAL_TIM_PWM_Start_DMA(), HAL_TIM_PWM_Start_IT() - (++) One-pulse mode output : HAL_TIM_OnePulse_Start(), HAL_TIM_OnePulse_Start_IT() - (++) Encoder mode output : HAL_TIM_Encoder_Start(), HAL_TIM_Encoder_Start_DMA(), HAL_TIM_Encoder_Start_IT(). - - (#) The DMA Burst is managed with the two following functions: - HAL_TIM_DMABurst_WriteStart() - HAL_TIM_DMABurst_ReadStart() - - *** Callback registration *** - ============================================= - - The compilation define USE_HAL_TIM_REGISTER_CALLBACKS when set to 1 - allows the user to configure dynamically the driver callbacks. - - Use Function @ref HAL_TIM_RegisterCallback() to register a callback. - @ref HAL_TIM_RegisterCallback() takes as parameters the HAL peripheral handle, - the Callback ID and a pointer to the user callback function. - - Use function @ref HAL_TIM_UnRegisterCallback() to reset a callback to the default - weak function. - @ref HAL_TIM_UnRegisterCallback takes as parameters the HAL peripheral handle, - and the Callback ID. - - These functions allow to register/unregister following callbacks: - (+) Base_MspInitCallback : TIM Base Msp Init Callback. - (+) Base_MspDeInitCallback : TIM Base Msp DeInit Callback. - (+) IC_MspInitCallback : TIM IC Msp Init Callback. - (+) IC_MspDeInitCallback : TIM IC Msp DeInit Callback. - (+) OC_MspInitCallback : TIM OC Msp Init Callback. - (+) OC_MspDeInitCallback : TIM OC Msp DeInit Callback. - (+) PWM_MspInitCallback : TIM PWM Msp Init Callback. - (+) PWM_MspDeInitCallback : TIM PWM Msp DeInit Callback. - (+) OnePulse_MspInitCallback : TIM One Pulse Msp Init Callback. - (+) OnePulse_MspDeInitCallback : TIM One Pulse Msp DeInit Callback. - (+) Encoder_MspInitCallback : TIM Encoder Msp Init Callback. - (+) Encoder_MspDeInitCallback : TIM Encoder Msp DeInit Callback. - (+) HallSensor_MspInitCallback : TIM Hall Sensor Msp Init Callback. - (+) HallSensor_MspDeInitCallback : TIM Hall Sensor Msp DeInit Callback. - (+) PeriodElapsedCallback : TIM Period Elapsed Callback. - (+) PeriodElapsedHalfCpltCallback : TIM Period Elapsed half complete Callback. - (+) TriggerCallback : TIM Trigger Callback. - (+) TriggerHalfCpltCallback : TIM Trigger half complete Callback. - (+) IC_CaptureCallback : TIM Input Capture Callback. - (+) IC_CaptureHalfCpltCallback : TIM Input Capture half complete Callback. - (+) OC_DelayElapsedCallback : TIM Output Compare Delay Elapsed Callback. - (+) PWM_PulseFinishedCallback : TIM PWM Pulse Finished Callback. - (+) PWM_PulseFinishedHalfCpltCallback : TIM PWM Pulse Finished half complete Callback. - (+) ErrorCallback : TIM Error Callback. - (+) CommutationCallback : TIM Commutation Callback. - (+) CommutationHalfCpltCallback : TIM Commutation half complete Callback. - (+) BreakCallback : TIM Break Callback. - (+) Break2Callback : TIM Break2 Callback. - -By default, after the Init and when the state is HAL_TIM_STATE_RESET -all interrupt callbacks are set to the corresponding weak functions: - examples @ref HAL_TIM_TriggerCallback(), @ref HAL_TIM_ErrorCallback(). - - Exception done for MspInit and MspDeInit functions that are reset to the legacy weak - functionalities in the Init / DeInit only when these callbacks are null - (not registered beforehand). If not, MspInit or MspDeInit are not null, the Init / DeInit - keep and use the user MspInit / MspDeInit callbacks(registered beforehand) - - Callbacks can be registered / unregistered in HAL_TIM_STATE_READY state only. - Exception done MspInit / MspDeInit that can be registered / unregistered - in HAL_TIM_STATE_READY or HAL_TIM_STATE_RESET state, - thus registered(user) MspInit / DeInit callbacks can be used during the Init / DeInit. - In that case first register the MspInit/MspDeInit user callbacks - using @ref HAL_TIM_RegisterCallback() before calling DeInit or Init function. - - When The compilation define USE_HAL_TIM_REGISTER_CALLBACKS is set to 0 or - not defined, the callback registration feature is not available and all callbacks - are set to the corresponding weak functions. - - @endverbatim - ****************************************************************************** - * @attention - * - *

© Copyright (c) 2017 STMicroelectronics. - * All rights reserved.

- * - * This software component is licensed by ST under BSD 3-Clause license, - * the "License"; You may not use this file except in compliance with the - * License. You may obtain a copy of the License at: - * opensource.org/licenses/BSD-3-Clause - * - ****************************************************************************** - */ - -/* Includes ------------------------------------------------------------------*/ -#include "stm32f7xx_hal.h" - -/** @addtogroup STM32F7xx_HAL_Driver - * @{ - */ - -/** @defgroup TIM TIM - * @brief TIM HAL module driver - * @{ - */ - -#ifdef HAL_TIM_MODULE_ENABLED - -/* Private typedef -----------------------------------------------------------*/ -/* Private define ------------------------------------------------------------*/ -/* Private macro -------------------------------------------------------------*/ -/* Private variables ---------------------------------------------------------*/ -/* Private function prototypes -----------------------------------------------*/ -/** @addtogroup TIM_Private_Functions - * @{ - */ -static void TIM_OC1_SetConfig(TIM_TypeDef *TIMx, TIM_OC_InitTypeDef *OC_Config); -static void TIM_OC3_SetConfig(TIM_TypeDef *TIMx, TIM_OC_InitTypeDef *OC_Config); -static void TIM_OC4_SetConfig(TIM_TypeDef *TIMx, TIM_OC_InitTypeDef *OC_Config); -static void TIM_OC5_SetConfig(TIM_TypeDef *TIMx, TIM_OC_InitTypeDef *OC_Config); -static void TIM_OC6_SetConfig(TIM_TypeDef *TIMx, TIM_OC_InitTypeDef *OC_Config); -static void TIM_TI1_ConfigInputStage(TIM_TypeDef *TIMx, uint32_t TIM_ICPolarity, uint32_t TIM_ICFilter); -static void TIM_TI2_SetConfig(TIM_TypeDef *TIMx, uint32_t TIM_ICPolarity, uint32_t TIM_ICSelection, - uint32_t TIM_ICFilter); -static void TIM_TI2_ConfigInputStage(TIM_TypeDef *TIMx, uint32_t TIM_ICPolarity, uint32_t TIM_ICFilter); -static void TIM_TI3_SetConfig(TIM_TypeDef *TIMx, uint32_t TIM_ICPolarity, uint32_t TIM_ICSelection, - uint32_t TIM_ICFilter); -static void TIM_TI4_SetConfig(TIM_TypeDef *TIMx, uint32_t TIM_ICPolarity, uint32_t TIM_ICSelection, - uint32_t TIM_ICFilter); -static void TIM_ITRx_SetConfig(TIM_TypeDef *TIMx, uint32_t InputTriggerSource); -static void TIM_DMAPeriodElapsedCplt(DMA_HandleTypeDef *hdma); -static void TIM_DMAPeriodElapsedHalfCplt(DMA_HandleTypeDef *hdma); -static void TIM_DMATriggerCplt(DMA_HandleTypeDef *hdma); -static void TIM_DMATriggerHalfCplt(DMA_HandleTypeDef *hdma); -static HAL_StatusTypeDef TIM_SlaveTimer_SetConfig(TIM_HandleTypeDef *htim, - TIM_SlaveConfigTypeDef *sSlaveConfig); -/** - * @} - */ -/* Exported functions --------------------------------------------------------*/ - -/** @defgroup TIM_Exported_Functions TIM Exported Functions - * @{ - */ - -/** @defgroup TIM_Exported_Functions_Group1 TIM Time Base functions - * @brief Time Base functions - * -@verbatim - ============================================================================== - ##### Time Base functions ##### - ============================================================================== - [..] - This section provides functions allowing to: - (+) Initialize and configure the TIM base. - (+) De-initialize the TIM base. - (+) Start the Time Base. - (+) Stop the Time Base. - (+) Start the Time Base and enable interrupt. - (+) Stop the Time Base and disable interrupt. - (+) Start the Time Base and enable DMA transfer. - (+) Stop the Time Base and disable DMA transfer. - -@endverbatim - * @{ - */ -/** - * @brief Initializes the TIM Time base Unit according to the specified - * parameters in the TIM_HandleTypeDef and initialize the associated handle. - * @note Switching from Center Aligned counter mode to Edge counter mode (or reverse) - * requires a timer reset to avoid unexpected direction - * due to DIR bit readonly in center aligned mode. - * Ex: call @ref HAL_TIM_Base_DeInit() before HAL_TIM_Base_Init() - * @param htim TIM Base handle - * @retval HAL status - */ -HAL_StatusTypeDef HAL_TIM_Base_Init(TIM_HandleTypeDef *htim) -{ - /* Check the TIM handle allocation */ - if (htim == NULL) - { - return HAL_ERROR; - } - - /* Check the parameters */ - assert_param(IS_TIM_INSTANCE(htim->Instance)); - assert_param(IS_TIM_COUNTER_MODE(htim->Init.CounterMode)); - assert_param(IS_TIM_CLOCKDIVISION_DIV(htim->Init.ClockDivision)); - assert_param(IS_TIM_AUTORELOAD_PRELOAD(htim->Init.AutoReloadPreload)); - - if (htim->State == HAL_TIM_STATE_RESET) - { - /* Allocate lock resource and initialize it */ - htim->Lock = HAL_UNLOCKED; - -#if (USE_HAL_TIM_REGISTER_CALLBACKS == 1) - /* Reset interrupt callbacks to legacy weak callbacks */ - TIM_ResetCallback(htim); - - if (htim->Base_MspInitCallback == NULL) - { - htim->Base_MspInitCallback = HAL_TIM_Base_MspInit; - } - /* Init the low level hardware : GPIO, CLOCK, NVIC */ - htim->Base_MspInitCallback(htim); -#else - /* Init the low level hardware : GPIO, CLOCK, NVIC */ - HAL_TIM_Base_MspInit(htim); -#endif /* USE_HAL_TIM_REGISTER_CALLBACKS */ - } - - /* Set the TIM state */ - htim->State = HAL_TIM_STATE_BUSY; - - /* Set the Time Base configuration */ - TIM_Base_SetConfig(htim->Instance, &htim->Init); - - /* Initialize the TIM state*/ - htim->State = HAL_TIM_STATE_READY; - - return HAL_OK; -} - -/** - * @brief DeInitializes the TIM Base peripheral - * @param htim TIM Base handle - * @retval HAL status - */ -HAL_StatusTypeDef HAL_TIM_Base_DeInit(TIM_HandleTypeDef *htim) -{ - /* Check the parameters */ - assert_param(IS_TIM_INSTANCE(htim->Instance)); - - htim->State = HAL_TIM_STATE_BUSY; - - /* Disable the TIM Peripheral Clock */ - __HAL_TIM_DISABLE(htim); - -#if (USE_HAL_TIM_REGISTER_CALLBACKS == 1) - if (htim->Base_MspDeInitCallback == NULL) - { - htim->Base_MspDeInitCallback = HAL_TIM_Base_MspDeInit; - } - /* DeInit the low level hardware */ - htim->Base_MspDeInitCallback(htim); -#else - /* DeInit the low level hardware: GPIO, CLOCK, NVIC */ - HAL_TIM_Base_MspDeInit(htim); -#endif /* USE_HAL_TIM_REGISTER_CALLBACKS */ - - /* Change TIM state */ - htim->State = HAL_TIM_STATE_RESET; - - /* Release Lock */ - __HAL_UNLOCK(htim); - - return HAL_OK; -} - -/** - * @brief Initializes the TIM Base MSP. - * @param htim TIM Base handle - * @retval None - */ -__weak void HAL_TIM_Base_MspInit(TIM_HandleTypeDef *htim) -{ - /* Prevent unused argument(s) compilation warning */ - UNUSED(htim); - - /* NOTE : This function should not be modified, when the callback is needed, - the HAL_TIM_Base_MspInit could be implemented in the user file - */ -} - -/** - * @brief DeInitializes TIM Base MSP. - * @param htim TIM Base handle - * @retval None - */ -__weak void HAL_TIM_Base_MspDeInit(TIM_HandleTypeDef *htim) -{ - /* Prevent unused argument(s) compilation warning */ - UNUSED(htim); - - /* NOTE : This function should not be modified, when the callback is needed, - the HAL_TIM_Base_MspDeInit could be implemented in the user file - */ -} - - -/** - * @brief Starts the TIM Base generation. - * @param htim TIM Base handle - * @retval HAL status - */ -HAL_StatusTypeDef HAL_TIM_Base_Start(TIM_HandleTypeDef *htim) -{ - uint32_t tmpsmcr; - - /* Check the parameters */ - assert_param(IS_TIM_INSTANCE(htim->Instance)); - - /* Set the TIM state */ - htim->State = HAL_TIM_STATE_BUSY; - - /* Enable the Peripheral, except in trigger mode where enable is automatically done with trigger */ - tmpsmcr = htim->Instance->SMCR & TIM_SMCR_SMS; - if (!IS_TIM_SLAVEMODE_TRIGGER_ENABLED(tmpsmcr)) - { - __HAL_TIM_ENABLE(htim); - } - - /* Change the TIM state*/ - htim->State = HAL_TIM_STATE_READY; - - /* Return function status */ - return HAL_OK; -} - -/** - * @brief Stops the TIM Base generation. - * @param htim TIM Base handle - * @retval HAL status - */ -HAL_StatusTypeDef HAL_TIM_Base_Stop(TIM_HandleTypeDef *htim) -{ - /* Check the parameters */ - assert_param(IS_TIM_INSTANCE(htim->Instance)); - - /* Set the TIM state */ - htim->State = HAL_TIM_STATE_BUSY; - - /* Disable the Peripheral */ - __HAL_TIM_DISABLE(htim); - - /* Change the TIM state*/ - htim->State = HAL_TIM_STATE_READY; - - /* Return function status */ - return HAL_OK; -} - -/** - * @brief Starts the TIM Base generation in interrupt mode. - * @param htim TIM Base handle - * @retval HAL status - */ -HAL_StatusTypeDef HAL_TIM_Base_Start_IT(TIM_HandleTypeDef *htim) -{ - uint32_t tmpsmcr; - - /* Check the parameters */ - assert_param(IS_TIM_INSTANCE(htim->Instance)); - - /* Enable the TIM Update interrupt */ - __HAL_TIM_ENABLE_IT(htim, TIM_IT_UPDATE); - - /* Enable the Peripheral, except in trigger mode where enable is automatically done with trigger */ - tmpsmcr = htim->Instance->SMCR & TIM_SMCR_SMS; - if (!IS_TIM_SLAVEMODE_TRIGGER_ENABLED(tmpsmcr)) - { - __HAL_TIM_ENABLE(htim); - } - - /* Return function status */ - return HAL_OK; -} - -/** - * @brief Stops the TIM Base generation in interrupt mode. - * @param htim TIM Base handle - * @retval HAL status - */ -HAL_StatusTypeDef HAL_TIM_Base_Stop_IT(TIM_HandleTypeDef *htim) -{ - /* Check the parameters */ - assert_param(IS_TIM_INSTANCE(htim->Instance)); - /* Disable the TIM Update interrupt */ - __HAL_TIM_DISABLE_IT(htim, TIM_IT_UPDATE); - - /* Disable the Peripheral */ - __HAL_TIM_DISABLE(htim); - - /* Return function status */ - return HAL_OK; -} - -/** - * @brief Starts the TIM Base generation in DMA mode. - * @param htim TIM Base handle - * @param pData The source Buffer address. - * @param Length The length of data to be transferred from memory to peripheral. - * @retval HAL status - */ -HAL_StatusTypeDef HAL_TIM_Base_Start_DMA(TIM_HandleTypeDef *htim, uint32_t *pData, uint16_t Length) -{ - uint32_t tmpsmcr; - - /* Check the parameters */ - assert_param(IS_TIM_DMA_INSTANCE(htim->Instance)); - - if ((htim->State == HAL_TIM_STATE_BUSY)) - { - return HAL_BUSY; - } - else if ((htim->State == HAL_TIM_STATE_READY)) - { - if ((pData == NULL) && (Length > 0U)) - { - return HAL_ERROR; - } - else - { - htim->State = HAL_TIM_STATE_BUSY; - } - } - else - { - /* nothing to do */ - } - - /* Set the DMA Period elapsed callbacks */ - htim->hdma[TIM_DMA_ID_UPDATE]->XferCpltCallback = TIM_DMAPeriodElapsedCplt; - htim->hdma[TIM_DMA_ID_UPDATE]->XferHalfCpltCallback = TIM_DMAPeriodElapsedHalfCplt; - - /* Set the DMA error callback */ - htim->hdma[TIM_DMA_ID_UPDATE]->XferErrorCallback = TIM_DMAError ; - - /* Enable the DMA stream */ - if (HAL_DMA_Start_IT(htim->hdma[TIM_DMA_ID_UPDATE], (uint32_t)pData, (uint32_t)&htim->Instance->ARR, Length) != HAL_OK) - { - return HAL_ERROR; - } - - /* Enable the TIM Update DMA request */ - __HAL_TIM_ENABLE_DMA(htim, TIM_DMA_UPDATE); - - /* Enable the Peripheral, except in trigger mode where enable is automatically done with trigger */ - tmpsmcr = htim->Instance->SMCR & TIM_SMCR_SMS; - if (!IS_TIM_SLAVEMODE_TRIGGER_ENABLED(tmpsmcr)) - { - __HAL_TIM_ENABLE(htim); - } - - /* Return function status */ - return HAL_OK; -} - -/** - * @brief Stops the TIM Base generation in DMA mode. - * @param htim TIM Base handle - * @retval HAL status - */ -HAL_StatusTypeDef HAL_TIM_Base_Stop_DMA(TIM_HandleTypeDef *htim) -{ - /* Check the parameters */ - assert_param(IS_TIM_DMA_INSTANCE(htim->Instance)); - - /* Disable the TIM Update DMA request */ - __HAL_TIM_DISABLE_DMA(htim, TIM_DMA_UPDATE); - - (void)HAL_DMA_Abort_IT(htim->hdma[TIM_DMA_ID_UPDATE]); - - /* Disable the Peripheral */ - __HAL_TIM_DISABLE(htim); - - /* Change the htim state */ - htim->State = HAL_TIM_STATE_READY; - - /* Return function status */ - return HAL_OK; -} - -/** - * @} - */ - -/** @defgroup TIM_Exported_Functions_Group2 TIM Output Compare functions - * @brief TIM Output Compare functions - * -@verbatim - ============================================================================== - ##### TIM Output Compare functions ##### - ============================================================================== - [..] - This section provides functions allowing to: - (+) Initialize and configure the TIM Output Compare. - (+) De-initialize the TIM Output Compare. - (+) Start the TIM Output Compare. - (+) Stop the TIM Output Compare. - (+) Start the TIM Output Compare and enable interrupt. - (+) Stop the TIM Output Compare and disable interrupt. - (+) Start the TIM Output Compare and enable DMA transfer. - (+) Stop the TIM Output Compare and disable DMA transfer. - -@endverbatim - * @{ - */ -/** - * @brief Initializes the TIM Output Compare according to the specified - * parameters in the TIM_HandleTypeDef and initializes the associated handle. - * @note Switching from Center Aligned counter mode to Edge counter mode (or reverse) - * requires a timer reset to avoid unexpected direction - * due to DIR bit readonly in center aligned mode. - * Ex: call @ref HAL_TIM_OC_DeInit() before HAL_TIM_OC_Init() - * @param htim TIM Output Compare handle - * @retval HAL status - */ -HAL_StatusTypeDef HAL_TIM_OC_Init(TIM_HandleTypeDef *htim) -{ - /* Check the TIM handle allocation */ - if (htim == NULL) - { - return HAL_ERROR; - } - - /* Check the parameters */ - assert_param(IS_TIM_INSTANCE(htim->Instance)); - assert_param(IS_TIM_COUNTER_MODE(htim->Init.CounterMode)); - assert_param(IS_TIM_CLOCKDIVISION_DIV(htim->Init.ClockDivision)); - assert_param(IS_TIM_AUTORELOAD_PRELOAD(htim->Init.AutoReloadPreload)); - - if (htim->State == HAL_TIM_STATE_RESET) - { - /* Allocate lock resource and initialize it */ - htim->Lock = HAL_UNLOCKED; - -#if (USE_HAL_TIM_REGISTER_CALLBACKS == 1) - /* Reset interrupt callbacks to legacy weak callbacks */ - TIM_ResetCallback(htim); - - if (htim->OC_MspInitCallback == NULL) - { - htim->OC_MspInitCallback = HAL_TIM_OC_MspInit; - } - /* Init the low level hardware : GPIO, CLOCK, NVIC */ - htim->OC_MspInitCallback(htim); -#else - /* Init the low level hardware : GPIO, CLOCK, NVIC and DMA */ - HAL_TIM_OC_MspInit(htim); -#endif /* USE_HAL_TIM_REGISTER_CALLBACKS */ - } - - /* Set the TIM state */ - htim->State = HAL_TIM_STATE_BUSY; - - /* Init the base time for the Output Compare */ - TIM_Base_SetConfig(htim->Instance, &htim->Init); - - /* Initialize the TIM state*/ - htim->State = HAL_TIM_STATE_READY; - - return HAL_OK; -} - -/** - * @brief DeInitializes the TIM peripheral - * @param htim TIM Output Compare handle - * @retval HAL status - */ -HAL_StatusTypeDef HAL_TIM_OC_DeInit(TIM_HandleTypeDef *htim) -{ - /* Check the parameters */ - assert_param(IS_TIM_INSTANCE(htim->Instance)); - - htim->State = HAL_TIM_STATE_BUSY; - - /* Disable the TIM Peripheral Clock */ - __HAL_TIM_DISABLE(htim); - -#if (USE_HAL_TIM_REGISTER_CALLBACKS == 1) - if (htim->OC_MspDeInitCallback == NULL) - { - htim->OC_MspDeInitCallback = HAL_TIM_OC_MspDeInit; - } - /* DeInit the low level hardware */ - htim->OC_MspDeInitCallback(htim); -#else - /* DeInit the low level hardware: GPIO, CLOCK, NVIC and DMA */ - HAL_TIM_OC_MspDeInit(htim); -#endif /* USE_HAL_TIM_REGISTER_CALLBACKS */ - - /* Change TIM state */ - htim->State = HAL_TIM_STATE_RESET; - - /* Release Lock */ - __HAL_UNLOCK(htim); - - return HAL_OK; -} - -/** - * @brief Initializes the TIM Output Compare MSP. - * @param htim TIM Output Compare handle - * @retval None - */ -__weak void HAL_TIM_OC_MspInit(TIM_HandleTypeDef *htim) -{ - /* Prevent unused argument(s) compilation warning */ - UNUSED(htim); - - /* NOTE : This function should not be modified, when the callback is needed, - the HAL_TIM_OC_MspInit could be implemented in the user file - */ -} - -/** - * @brief DeInitializes TIM Output Compare MSP. - * @param htim TIM Output Compare handle - * @retval None - */ -__weak void HAL_TIM_OC_MspDeInit(TIM_HandleTypeDef *htim) -{ - /* Prevent unused argument(s) compilation warning */ - UNUSED(htim); - - /* NOTE : This function should not be modified, when the callback is needed, - the HAL_TIM_OC_MspDeInit could be implemented in the user file - */ -} - -/** - * @brief Starts the TIM Output Compare signal generation. - * @param htim TIM Output Compare handle - * @param Channel TIM Channel to be enabled - * This parameter can be one of the following values: - * @arg TIM_CHANNEL_1: TIM Channel 1 selected - * @arg TIM_CHANNEL_2: TIM Channel 2 selected - * @arg TIM_CHANNEL_3: TIM Channel 3 selected - * @arg TIM_CHANNEL_4: TIM Channel 4 selected - * @arg TIM_CHANNEL_5: TIM Channel 5 selected - * @arg TIM_CHANNEL_6: TIM Channel 6 selected - * @retval HAL status - */ -HAL_StatusTypeDef HAL_TIM_OC_Start(TIM_HandleTypeDef *htim, uint32_t Channel) -{ - uint32_t tmpsmcr; - - /* Check the parameters */ - assert_param(IS_TIM_CCX_INSTANCE(htim->Instance, Channel)); - - /* Enable the Output compare channel */ - TIM_CCxChannelCmd(htim->Instance, Channel, TIM_CCx_ENABLE); - - if (IS_TIM_BREAK_INSTANCE(htim->Instance) != RESET) - { - /* Enable the main output */ - __HAL_TIM_MOE_ENABLE(htim); - } - - /* Enable the Peripheral, except in trigger mode where enable is automatically done with trigger */ - tmpsmcr = htim->Instance->SMCR & TIM_SMCR_SMS; - if (!IS_TIM_SLAVEMODE_TRIGGER_ENABLED(tmpsmcr)) - { - __HAL_TIM_ENABLE(htim); - } - - /* Return function status */ - return HAL_OK; -} - -/** - * @brief Stops the TIM Output Compare signal generation. - * @param htim TIM Output Compare handle - * @param Channel TIM Channel to be disabled - * This parameter can be one of the following values: - * @arg TIM_CHANNEL_1: TIM Channel 1 selected - * @arg TIM_CHANNEL_2: TIM Channel 2 selected - * @arg TIM_CHANNEL_3: TIM Channel 3 selected - * @arg TIM_CHANNEL_4: TIM Channel 4 selected - * @arg TIM_CHANNEL_5: TIM Channel 5 selected - * @arg TIM_CHANNEL_6: TIM Channel 6 selected - * @retval HAL status - */ -HAL_StatusTypeDef HAL_TIM_OC_Stop(TIM_HandleTypeDef *htim, uint32_t Channel) -{ - /* Check the parameters */ - assert_param(IS_TIM_CCX_INSTANCE(htim->Instance, Channel)); - - /* Disable the Output compare channel */ - TIM_CCxChannelCmd(htim->Instance, Channel, TIM_CCx_DISABLE); - - if (IS_TIM_BREAK_INSTANCE(htim->Instance) != RESET) - { - /* Disable the Main Output */ - __HAL_TIM_MOE_DISABLE(htim); - } - - /* Disable the Peripheral */ - __HAL_TIM_DISABLE(htim); - - /* Return function status */ - return HAL_OK; -} - -/** - * @brief Starts the TIM Output Compare signal generation in interrupt mode. - * @param htim TIM Output Compare handle - * @param Channel TIM Channel to be enabled - * This parameter can be one of the following values: - * @arg TIM_CHANNEL_1: TIM Channel 1 selected - * @arg TIM_CHANNEL_2: TIM Channel 2 selected - * @arg TIM_CHANNEL_3: TIM Channel 3 selected - * @arg TIM_CHANNEL_4: TIM Channel 4 selected - * @retval HAL status - */ -HAL_StatusTypeDef HAL_TIM_OC_Start_IT(TIM_HandleTypeDef *htim, uint32_t Channel) -{ - uint32_t tmpsmcr; - - /* Check the parameters */ - assert_param(IS_TIM_CCX_INSTANCE(htim->Instance, Channel)); - - switch (Channel) - { - case TIM_CHANNEL_1: - { - /* Enable the TIM Capture/Compare 1 interrupt */ - __HAL_TIM_ENABLE_IT(htim, TIM_IT_CC1); - break; - } - - case TIM_CHANNEL_2: - { - /* Enable the TIM Capture/Compare 2 interrupt */ - __HAL_TIM_ENABLE_IT(htim, TIM_IT_CC2); - break; - } - - case TIM_CHANNEL_3: - { - /* Enable the TIM Capture/Compare 3 interrupt */ - __HAL_TIM_ENABLE_IT(htim, TIM_IT_CC3); - break; - } - - case TIM_CHANNEL_4: - { - /* Enable the TIM Capture/Compare 4 interrupt */ - __HAL_TIM_ENABLE_IT(htim, TIM_IT_CC4); - break; - } - - default: - break; - } - - /* Enable the Output compare channel */ - TIM_CCxChannelCmd(htim->Instance, Channel, TIM_CCx_ENABLE); - - if (IS_TIM_BREAK_INSTANCE(htim->Instance) != RESET) - { - /* Enable the main output */ - __HAL_TIM_MOE_ENABLE(htim); - } - - /* Enable the Peripheral, except in trigger mode where enable is automatically done with trigger */ - tmpsmcr = htim->Instance->SMCR & TIM_SMCR_SMS; - if (!IS_TIM_SLAVEMODE_TRIGGER_ENABLED(tmpsmcr)) - { - __HAL_TIM_ENABLE(htim); - } - - /* Return function status */ - return HAL_OK; -} - -/** - * @brief Stops the TIM Output Compare signal generation in interrupt mode. - * @param htim TIM Output Compare handle - * @param Channel TIM Channel to be disabled - * This parameter can be one of the following values: - * @arg TIM_CHANNEL_1: TIM Channel 1 selected - * @arg TIM_CHANNEL_2: TIM Channel 2 selected - * @arg TIM_CHANNEL_3: TIM Channel 3 selected - * @arg TIM_CHANNEL_4: TIM Channel 4 selected - * @retval HAL status - */ -HAL_StatusTypeDef HAL_TIM_OC_Stop_IT(TIM_HandleTypeDef *htim, uint32_t Channel) -{ - /* Check the parameters */ - assert_param(IS_TIM_CCX_INSTANCE(htim->Instance, Channel)); - - switch (Channel) - { - case TIM_CHANNEL_1: - { - /* Disable the TIM Capture/Compare 1 interrupt */ - __HAL_TIM_DISABLE_IT(htim, TIM_IT_CC1); - break; - } - - case TIM_CHANNEL_2: - { - /* Disable the TIM Capture/Compare 2 interrupt */ - __HAL_TIM_DISABLE_IT(htim, TIM_IT_CC2); - break; - } - - case TIM_CHANNEL_3: - { - /* Disable the TIM Capture/Compare 3 interrupt */ - __HAL_TIM_DISABLE_IT(htim, TIM_IT_CC3); - break; - } - - case TIM_CHANNEL_4: - { - /* Disable the TIM Capture/Compare 4 interrupt */ - __HAL_TIM_DISABLE_IT(htim, TIM_IT_CC4); - break; - } - - default: - break; - } - - /* Disable the Output compare channel */ - TIM_CCxChannelCmd(htim->Instance, Channel, TIM_CCx_DISABLE); - - if (IS_TIM_BREAK_INSTANCE(htim->Instance) != RESET) - { - /* Disable the Main Output */ - __HAL_TIM_MOE_DISABLE(htim); - } - - /* Disable the Peripheral */ - __HAL_TIM_DISABLE(htim); - - /* Return function status */ - return HAL_OK; -} - -/** - * @brief Starts the TIM Output Compare signal generation in DMA mode. - * @param htim TIM Output Compare handle - * @param Channel TIM Channel to be enabled - * This parameter can be one of the following values: - * @arg TIM_CHANNEL_1: TIM Channel 1 selected - * @arg TIM_CHANNEL_2: TIM Channel 2 selected - * @arg TIM_CHANNEL_3: TIM Channel 3 selected - * @arg TIM_CHANNEL_4: TIM Channel 4 selected - * @param pData The source Buffer address. - * @param Length The length of data to be transferred from memory to TIM peripheral - * @retval HAL status - */ -HAL_StatusTypeDef HAL_TIM_OC_Start_DMA(TIM_HandleTypeDef *htim, uint32_t Channel, uint32_t *pData, uint16_t Length) -{ - uint32_t tmpsmcr; - - /* Check the parameters */ - assert_param(IS_TIM_CCX_INSTANCE(htim->Instance, Channel)); - - if ((htim->State == HAL_TIM_STATE_BUSY)) - { - return HAL_BUSY; - } - else if ((htim->State == HAL_TIM_STATE_READY)) - { - if ((pData == NULL) && (Length > 0U)) - { - return HAL_ERROR; - } - else - { - htim->State = HAL_TIM_STATE_BUSY; - } - } - else - { - /* nothing to do */ - } - - switch (Channel) - { - case TIM_CHANNEL_1: - { - /* Set the DMA compare callbacks */ - htim->hdma[TIM_DMA_ID_CC1]->XferCpltCallback = TIM_DMADelayPulseCplt; - htim->hdma[TIM_DMA_ID_CC1]->XferHalfCpltCallback = TIM_DMADelayPulseHalfCplt; - - /* Set the DMA error callback */ - htim->hdma[TIM_DMA_ID_CC1]->XferErrorCallback = TIM_DMAError ; - - /* Enable the DMA stream */ - if (HAL_DMA_Start_IT(htim->hdma[TIM_DMA_ID_CC1], (uint32_t)pData, (uint32_t)&htim->Instance->CCR1, Length) != HAL_OK) - { - return HAL_ERROR; - } - - /* Enable the TIM Capture/Compare 1 DMA request */ - __HAL_TIM_ENABLE_DMA(htim, TIM_DMA_CC1); - break; - } - - case TIM_CHANNEL_2: - { - /* Set the DMA compare callbacks */ - htim->hdma[TIM_DMA_ID_CC2]->XferCpltCallback = TIM_DMADelayPulseCplt; - htim->hdma[TIM_DMA_ID_CC2]->XferHalfCpltCallback = TIM_DMADelayPulseHalfCplt; - - /* Set the DMA error callback */ - htim->hdma[TIM_DMA_ID_CC2]->XferErrorCallback = TIM_DMAError ; - - /* Enable the DMA stream */ - if (HAL_DMA_Start_IT(htim->hdma[TIM_DMA_ID_CC2], (uint32_t)pData, (uint32_t)&htim->Instance->CCR2, Length) != HAL_OK) - { - return HAL_ERROR; - } - - /* Enable the TIM Capture/Compare 2 DMA request */ - __HAL_TIM_ENABLE_DMA(htim, TIM_DMA_CC2); - break; - } - - case TIM_CHANNEL_3: - { - /* Set the DMA compare callbacks */ - htim->hdma[TIM_DMA_ID_CC3]->XferCpltCallback = TIM_DMADelayPulseCplt; - htim->hdma[TIM_DMA_ID_CC3]->XferHalfCpltCallback = TIM_DMADelayPulseHalfCplt; - - /* Set the DMA error callback */ - htim->hdma[TIM_DMA_ID_CC3]->XferErrorCallback = TIM_DMAError ; - - /* Enable the DMA stream */ - if (HAL_DMA_Start_IT(htim->hdma[TIM_DMA_ID_CC3], (uint32_t)pData, (uint32_t)&htim->Instance->CCR3, Length) != HAL_OK) - { - return HAL_ERROR; - } - /* Enable the TIM Capture/Compare 3 DMA request */ - __HAL_TIM_ENABLE_DMA(htim, TIM_DMA_CC3); - break; - } - - case TIM_CHANNEL_4: - { - /* Set the DMA compare callbacks */ - htim->hdma[TIM_DMA_ID_CC4]->XferCpltCallback = TIM_DMADelayPulseCplt; - htim->hdma[TIM_DMA_ID_CC4]->XferHalfCpltCallback = TIM_DMADelayPulseHalfCplt; - - /* Set the DMA error callback */ - htim->hdma[TIM_DMA_ID_CC4]->XferErrorCallback = TIM_DMAError ; - - /* Enable the DMA stream */ - if (HAL_DMA_Start_IT(htim->hdma[TIM_DMA_ID_CC4], (uint32_t)pData, (uint32_t)&htim->Instance->CCR4, Length) != HAL_OK) - { - return HAL_ERROR; - } - /* Enable the TIM Capture/Compare 4 DMA request */ - __HAL_TIM_ENABLE_DMA(htim, TIM_DMA_CC4); - break; - } - - default: - break; - } - - /* Enable the Output compare channel */ - TIM_CCxChannelCmd(htim->Instance, Channel, TIM_CCx_ENABLE); - - if (IS_TIM_BREAK_INSTANCE(htim->Instance) != RESET) - { - /* Enable the main output */ - __HAL_TIM_MOE_ENABLE(htim); - } - - /* Enable the Peripheral, except in trigger mode where enable is automatically done with trigger */ - tmpsmcr = htim->Instance->SMCR & TIM_SMCR_SMS; - if (!IS_TIM_SLAVEMODE_TRIGGER_ENABLED(tmpsmcr)) - { - __HAL_TIM_ENABLE(htim); - } - - /* Return function status */ - return HAL_OK; -} - -/** - * @brief Stops the TIM Output Compare signal generation in DMA mode. - * @param htim TIM Output Compare handle - * @param Channel TIM Channel to be disabled - * This parameter can be one of the following values: - * @arg TIM_CHANNEL_1: TIM Channel 1 selected - * @arg TIM_CHANNEL_2: TIM Channel 2 selected - * @arg TIM_CHANNEL_3: TIM Channel 3 selected - * @arg TIM_CHANNEL_4: TIM Channel 4 selected - * @retval HAL status - */ -HAL_StatusTypeDef HAL_TIM_OC_Stop_DMA(TIM_HandleTypeDef *htim, uint32_t Channel) -{ - /* Check the parameters */ - assert_param(IS_TIM_CCX_INSTANCE(htim->Instance, Channel)); - - switch (Channel) - { - case TIM_CHANNEL_1: - { - /* Disable the TIM Capture/Compare 1 DMA request */ - __HAL_TIM_DISABLE_DMA(htim, TIM_DMA_CC1); - (void)HAL_DMA_Abort_IT(htim->hdma[TIM_DMA_ID_CC1]); - break; - } - - case TIM_CHANNEL_2: - { - /* Disable the TIM Capture/Compare 2 DMA request */ - __HAL_TIM_DISABLE_DMA(htim, TIM_DMA_CC2); - (void)HAL_DMA_Abort_IT(htim->hdma[TIM_DMA_ID_CC2]); - break; - } - - case TIM_CHANNEL_3: - { - /* Disable the TIM Capture/Compare 3 DMA request */ - __HAL_TIM_DISABLE_DMA(htim, TIM_DMA_CC3); - (void)HAL_DMA_Abort_IT(htim->hdma[TIM_DMA_ID_CC3]); - break; - } - - case TIM_CHANNEL_4: - { - /* Disable the TIM Capture/Compare 4 interrupt */ - __HAL_TIM_DISABLE_DMA(htim, TIM_DMA_CC4); - (void)HAL_DMA_Abort_IT(htim->hdma[TIM_DMA_ID_CC4]); - break; - } - - default: - break; - } - - /* Disable the Output compare channel */ - TIM_CCxChannelCmd(htim->Instance, Channel, TIM_CCx_DISABLE); - - if (IS_TIM_BREAK_INSTANCE(htim->Instance) != RESET) - { - /* Disable the Main Output */ - __HAL_TIM_MOE_DISABLE(htim); - } - - /* Disable the Peripheral */ - __HAL_TIM_DISABLE(htim); - - /* Change the htim state */ - htim->State = HAL_TIM_STATE_READY; - - /* Return function status */ - return HAL_OK; -} - -/** - * @} - */ - -/** @defgroup TIM_Exported_Functions_Group3 TIM PWM functions - * @brief TIM PWM functions - * -@verbatim - ============================================================================== - ##### TIM PWM functions ##### - ============================================================================== - [..] - This section provides functions allowing to: - (+) Initialize and configure the TIM PWM. - (+) De-initialize the TIM PWM. - (+) Start the TIM PWM. - (+) Stop the TIM PWM. - (+) Start the TIM PWM and enable interrupt. - (+) Stop the TIM PWM and disable interrupt. - (+) Start the TIM PWM and enable DMA transfer. - (+) Stop the TIM PWM and disable DMA transfer. - -@endverbatim - * @{ - */ -/** - * @brief Initializes the TIM PWM Time Base according to the specified - * parameters in the TIM_HandleTypeDef and initializes the associated handle. - * @note Switching from Center Aligned counter mode to Edge counter mode (or reverse) - * requires a timer reset to avoid unexpected direction - * due to DIR bit readonly in center aligned mode. - * Ex: call @ref HAL_TIM_PWM_DeInit() before HAL_TIM_PWM_Init() - * @param htim TIM PWM handle - * @retval HAL status - */ -HAL_StatusTypeDef HAL_TIM_PWM_Init(TIM_HandleTypeDef *htim) -{ - /* Check the TIM handle allocation */ - if (htim == NULL) - { - return HAL_ERROR; - } - - /* Check the parameters */ - assert_param(IS_TIM_INSTANCE(htim->Instance)); - assert_param(IS_TIM_COUNTER_MODE(htim->Init.CounterMode)); - assert_param(IS_TIM_CLOCKDIVISION_DIV(htim->Init.ClockDivision)); - assert_param(IS_TIM_AUTORELOAD_PRELOAD(htim->Init.AutoReloadPreload)); - - if (htim->State == HAL_TIM_STATE_RESET) - { - /* Allocate lock resource and initialize it */ - htim->Lock = HAL_UNLOCKED; - -#if (USE_HAL_TIM_REGISTER_CALLBACKS == 1) - /* Reset interrupt callbacks to legacy weak callbacks */ - TIM_ResetCallback(htim); - - if (htim->PWM_MspInitCallback == NULL) - { - htim->PWM_MspInitCallback = HAL_TIM_PWM_MspInit; - } - /* Init the low level hardware : GPIO, CLOCK, NVIC */ - htim->PWM_MspInitCallback(htim); -#else - /* Init the low level hardware : GPIO, CLOCK, NVIC and DMA */ - HAL_TIM_PWM_MspInit(htim); -#endif /* USE_HAL_TIM_REGISTER_CALLBACKS */ - } - - /* Set the TIM state */ - htim->State = HAL_TIM_STATE_BUSY; - - /* Init the base time for the PWM */ - TIM_Base_SetConfig(htim->Instance, &htim->Init); - - /* Initialize the TIM state*/ - htim->State = HAL_TIM_STATE_READY; - - return HAL_OK; -} - -/** - * @brief DeInitializes the TIM peripheral - * @param htim TIM PWM handle - * @retval HAL status - */ -HAL_StatusTypeDef HAL_TIM_PWM_DeInit(TIM_HandleTypeDef *htim) -{ - /* Check the parameters */ - assert_param(IS_TIM_INSTANCE(htim->Instance)); - - htim->State = HAL_TIM_STATE_BUSY; - - /* Disable the TIM Peripheral Clock */ - __HAL_TIM_DISABLE(htim); - -#if (USE_HAL_TIM_REGISTER_CALLBACKS == 1) - if (htim->PWM_MspDeInitCallback == NULL) - { - htim->PWM_MspDeInitCallback = HAL_TIM_PWM_MspDeInit; - } - /* DeInit the low level hardware */ - htim->PWM_MspDeInitCallback(htim); -#else - /* DeInit the low level hardware: GPIO, CLOCK, NVIC and DMA */ - HAL_TIM_PWM_MspDeInit(htim); -#endif /* USE_HAL_TIM_REGISTER_CALLBACKS */ - - /* Change TIM state */ - htim->State = HAL_TIM_STATE_RESET; - - /* Release Lock */ - __HAL_UNLOCK(htim); - - return HAL_OK; -} - -/** - * @brief Initializes the TIM PWM MSP. - * @param htim TIM PWM handle - * @retval None - */ -__weak void HAL_TIM_PWM_MspInit(TIM_HandleTypeDef *htim) -{ - /* Prevent unused argument(s) compilation warning */ - UNUSED(htim); - - /* NOTE : This function should not be modified, when the callback is needed, - the HAL_TIM_PWM_MspInit could be implemented in the user file - */ -} - -/** - * @brief DeInitializes TIM PWM MSP. - * @param htim TIM PWM handle - * @retval None - */ -__weak void HAL_TIM_PWM_MspDeInit(TIM_HandleTypeDef *htim) -{ - /* Prevent unused argument(s) compilation warning */ - UNUSED(htim); - - /* NOTE : This function should not be modified, when the callback is needed, - the HAL_TIM_PWM_MspDeInit could be implemented in the user file - */ -} - -/** - * @brief Starts the PWM signal generation. - * @param htim TIM handle - * @param Channel TIM Channels to be enabled - * This parameter can be one of the following values: - * @arg TIM_CHANNEL_1: TIM Channel 1 selected - * @arg TIM_CHANNEL_2: TIM Channel 2 selected - * @arg TIM_CHANNEL_3: TIM Channel 3 selected - * @arg TIM_CHANNEL_4: TIM Channel 4 selected - * @arg TIM_CHANNEL_5: TIM Channel 5 selected - * @arg TIM_CHANNEL_6: TIM Channel 6 selected - * @retval HAL status - */ -HAL_StatusTypeDef HAL_TIM_PWM_Start(TIM_HandleTypeDef *htim, uint32_t Channel) -{ - uint32_t tmpsmcr; - - /* Check the parameters */ - assert_param(IS_TIM_CCX_INSTANCE(htim->Instance, Channel)); - - /* Enable the Capture compare channel */ - TIM_CCxChannelCmd(htim->Instance, Channel, TIM_CCx_ENABLE); - - if (IS_TIM_BREAK_INSTANCE(htim->Instance) != RESET) - { - /* Enable the main output */ - __HAL_TIM_MOE_ENABLE(htim); - } - - /* Enable the Peripheral, except in trigger mode where enable is automatically done with trigger */ - tmpsmcr = htim->Instance->SMCR & TIM_SMCR_SMS; - if (!IS_TIM_SLAVEMODE_TRIGGER_ENABLED(tmpsmcr)) - { - __HAL_TIM_ENABLE(htim); - } - - /* Return function status */ - return HAL_OK; -} - -/** - * @brief Stops the PWM signal generation. - * @param htim TIM PWM handle - * @param Channel TIM Channels to be disabled - * This parameter can be one of the following values: - * @arg TIM_CHANNEL_1: TIM Channel 1 selected - * @arg TIM_CHANNEL_2: TIM Channel 2 selected - * @arg TIM_CHANNEL_3: TIM Channel 3 selected - * @arg TIM_CHANNEL_4: TIM Channel 4 selected - * @arg TIM_CHANNEL_5: TIM Channel 5 selected - * @arg TIM_CHANNEL_6: TIM Channel 6 selected - * @retval HAL status - */ -HAL_StatusTypeDef HAL_TIM_PWM_Stop(TIM_HandleTypeDef *htim, uint32_t Channel) -{ - /* Check the parameters */ - assert_param(IS_TIM_CCX_INSTANCE(htim->Instance, Channel)); - - /* Disable the Capture compare channel */ - TIM_CCxChannelCmd(htim->Instance, Channel, TIM_CCx_DISABLE); - - if (IS_TIM_BREAK_INSTANCE(htim->Instance) != RESET) - { - /* Disable the Main Output */ - __HAL_TIM_MOE_DISABLE(htim); - } - - /* Disable the Peripheral */ - __HAL_TIM_DISABLE(htim); - - /* Change the htim state */ - htim->State = HAL_TIM_STATE_READY; - - /* Return function status */ - return HAL_OK; -} - -/** - * @brief Starts the PWM signal generation in interrupt mode. - * @param htim TIM PWM handle - * @param Channel TIM Channel to be enabled - * This parameter can be one of the following values: - * @arg TIM_CHANNEL_1: TIM Channel 1 selected - * @arg TIM_CHANNEL_2: TIM Channel 2 selected - * @arg TIM_CHANNEL_3: TIM Channel 3 selected - * @arg TIM_CHANNEL_4: TIM Channel 4 selected - * @retval HAL status - */ -HAL_StatusTypeDef HAL_TIM_PWM_Start_IT(TIM_HandleTypeDef *htim, uint32_t Channel) -{ - uint32_t tmpsmcr; - /* Check the parameters */ - assert_param(IS_TIM_CCX_INSTANCE(htim->Instance, Channel)); - - switch (Channel) - { - case TIM_CHANNEL_1: - { - /* Enable the TIM Capture/Compare 1 interrupt */ - __HAL_TIM_ENABLE_IT(htim, TIM_IT_CC1); - break; - } - - case TIM_CHANNEL_2: - { - /* Enable the TIM Capture/Compare 2 interrupt */ - __HAL_TIM_ENABLE_IT(htim, TIM_IT_CC2); - break; - } - - case TIM_CHANNEL_3: - { - /* Enable the TIM Capture/Compare 3 interrupt */ - __HAL_TIM_ENABLE_IT(htim, TIM_IT_CC3); - break; - } - - case TIM_CHANNEL_4: - { - /* Enable the TIM Capture/Compare 4 interrupt */ - __HAL_TIM_ENABLE_IT(htim, TIM_IT_CC4); - break; - } - - default: - break; - } - - /* Enable the Capture compare channel */ - TIM_CCxChannelCmd(htim->Instance, Channel, TIM_CCx_ENABLE); - - if (IS_TIM_BREAK_INSTANCE(htim->Instance) != RESET) - { - /* Enable the main output */ - __HAL_TIM_MOE_ENABLE(htim); - } - - /* Enable the Peripheral, except in trigger mode where enable is automatically done with trigger */ - tmpsmcr = htim->Instance->SMCR & TIM_SMCR_SMS; - if (!IS_TIM_SLAVEMODE_TRIGGER_ENABLED(tmpsmcr)) - { - __HAL_TIM_ENABLE(htim); - } - - /* Return function status */ - return HAL_OK; -} - -/** - * @brief Stops the PWM signal generation in interrupt mode. - * @param htim TIM PWM handle - * @param Channel TIM Channels to be disabled - * This parameter can be one of the following values: - * @arg TIM_CHANNEL_1: TIM Channel 1 selected - * @arg TIM_CHANNEL_2: TIM Channel 2 selected - * @arg TIM_CHANNEL_3: TIM Channel 3 selected - * @arg TIM_CHANNEL_4: TIM Channel 4 selected - * @retval HAL status - */ -HAL_StatusTypeDef HAL_TIM_PWM_Stop_IT(TIM_HandleTypeDef *htim, uint32_t Channel) -{ - /* Check the parameters */ - assert_param(IS_TIM_CCX_INSTANCE(htim->Instance, Channel)); - - switch (Channel) - { - case TIM_CHANNEL_1: - { - /* Disable the TIM Capture/Compare 1 interrupt */ - __HAL_TIM_DISABLE_IT(htim, TIM_IT_CC1); - break; - } - - case TIM_CHANNEL_2: - { - /* Disable the TIM Capture/Compare 2 interrupt */ - __HAL_TIM_DISABLE_IT(htim, TIM_IT_CC2); - break; - } - - case TIM_CHANNEL_3: - { - /* Disable the TIM Capture/Compare 3 interrupt */ - __HAL_TIM_DISABLE_IT(htim, TIM_IT_CC3); - break; - } - - case TIM_CHANNEL_4: - { - /* Disable the TIM Capture/Compare 4 interrupt */ - __HAL_TIM_DISABLE_IT(htim, TIM_IT_CC4); - break; - } - - default: - break; - } - - /* Disable the Capture compare channel */ - TIM_CCxChannelCmd(htim->Instance, Channel, TIM_CCx_DISABLE); - - if (IS_TIM_BREAK_INSTANCE(htim->Instance) != RESET) - { - /* Disable the Main Output */ - __HAL_TIM_MOE_DISABLE(htim); - } - - /* Disable the Peripheral */ - __HAL_TIM_DISABLE(htim); - - /* Return function status */ - return HAL_OK; -} - -/** - * @brief Starts the TIM PWM signal generation in DMA mode. - * @param htim TIM PWM handle - * @param Channel TIM Channels to be enabled - * This parameter can be one of the following values: - * @arg TIM_CHANNEL_1: TIM Channel 1 selected - * @arg TIM_CHANNEL_2: TIM Channel 2 selected - * @arg TIM_CHANNEL_3: TIM Channel 3 selected - * @arg TIM_CHANNEL_4: TIM Channel 4 selected - * @param pData The source Buffer address. - * @param Length The length of data to be transferred from memory to TIM peripheral - * @retval HAL status - */ -HAL_StatusTypeDef HAL_TIM_PWM_Start_DMA(TIM_HandleTypeDef *htim, uint32_t Channel, uint32_t *pData, uint16_t Length) -{ - uint32_t tmpsmcr; - - /* Check the parameters */ - assert_param(IS_TIM_CCX_INSTANCE(htim->Instance, Channel)); - - if ((htim->State == HAL_TIM_STATE_BUSY)) - { - return HAL_BUSY; - } - else if ((htim->State == HAL_TIM_STATE_READY)) - { - if ((pData == NULL) && (Length > 0U)) - { - return HAL_ERROR; - } - else - { - htim->State = HAL_TIM_STATE_BUSY; - } - } - else - { - /* nothing to do */ - } - - switch (Channel) - { - case TIM_CHANNEL_1: - { - /* Set the DMA compare callbacks */ - htim->hdma[TIM_DMA_ID_CC1]->XferCpltCallback = TIM_DMADelayPulseCplt; - htim->hdma[TIM_DMA_ID_CC1]->XferHalfCpltCallback = TIM_DMADelayPulseHalfCplt; - - /* Set the DMA error callback */ - htim->hdma[TIM_DMA_ID_CC1]->XferErrorCallback = TIM_DMAError ; - - /* Enable the DMA stream */ - if (HAL_DMA_Start_IT(htim->hdma[TIM_DMA_ID_CC1], (uint32_t)pData, (uint32_t)&htim->Instance->CCR1, Length) != HAL_OK) - { - return HAL_ERROR; - } - - /* Enable the TIM Capture/Compare 1 DMA request */ - __HAL_TIM_ENABLE_DMA(htim, TIM_DMA_CC1); - break; - } - - case TIM_CHANNEL_2: - { - /* Set the DMA compare callbacks */ - htim->hdma[TIM_DMA_ID_CC2]->XferCpltCallback = TIM_DMADelayPulseCplt; - htim->hdma[TIM_DMA_ID_CC2]->XferHalfCpltCallback = TIM_DMADelayPulseHalfCplt; - - /* Set the DMA error callback */ - htim->hdma[TIM_DMA_ID_CC2]->XferErrorCallback = TIM_DMAError ; - - /* Enable the DMA stream */ - if (HAL_DMA_Start_IT(htim->hdma[TIM_DMA_ID_CC2], (uint32_t)pData, (uint32_t)&htim->Instance->CCR2, Length) != HAL_OK) - { - return HAL_ERROR; - } - /* Enable the TIM Capture/Compare 2 DMA request */ - __HAL_TIM_ENABLE_DMA(htim, TIM_DMA_CC2); - break; - } - - case TIM_CHANNEL_3: - { - /* Set the DMA compare callbacks */ - htim->hdma[TIM_DMA_ID_CC3]->XferCpltCallback = TIM_DMADelayPulseCplt; - htim->hdma[TIM_DMA_ID_CC3]->XferHalfCpltCallback = TIM_DMADelayPulseHalfCplt; - - /* Set the DMA error callback */ - htim->hdma[TIM_DMA_ID_CC3]->XferErrorCallback = TIM_DMAError ; - - /* Enable the DMA stream */ - if (HAL_DMA_Start_IT(htim->hdma[TIM_DMA_ID_CC3], (uint32_t)pData, (uint32_t)&htim->Instance->CCR3, Length) != HAL_OK) - { - return HAL_ERROR; - } - /* Enable the TIM Output Capture/Compare 3 request */ - __HAL_TIM_ENABLE_DMA(htim, TIM_DMA_CC3); - break; - } - - case TIM_CHANNEL_4: - { - /* Set the DMA compare callbacks */ - htim->hdma[TIM_DMA_ID_CC4]->XferCpltCallback = TIM_DMADelayPulseCplt; - htim->hdma[TIM_DMA_ID_CC4]->XferHalfCpltCallback = TIM_DMADelayPulseHalfCplt; - - /* Set the DMA error callback */ - htim->hdma[TIM_DMA_ID_CC4]->XferErrorCallback = TIM_DMAError ; - - /* Enable the DMA stream */ - if (HAL_DMA_Start_IT(htim->hdma[TIM_DMA_ID_CC4], (uint32_t)pData, (uint32_t)&htim->Instance->CCR4, Length) != HAL_OK) - { - return HAL_ERROR; - } - /* Enable the TIM Capture/Compare 4 DMA request */ - __HAL_TIM_ENABLE_DMA(htim, TIM_DMA_CC4); - break; - } - - default: - break; - } - - /* Enable the Capture compare channel */ - TIM_CCxChannelCmd(htim->Instance, Channel, TIM_CCx_ENABLE); - - if (IS_TIM_BREAK_INSTANCE(htim->Instance) != RESET) - { - /* Enable the main output */ - __HAL_TIM_MOE_ENABLE(htim); - } - - /* Enable the Peripheral, except in trigger mode where enable is automatically done with trigger */ - tmpsmcr = htim->Instance->SMCR & TIM_SMCR_SMS; - if (!IS_TIM_SLAVEMODE_TRIGGER_ENABLED(tmpsmcr)) - { - __HAL_TIM_ENABLE(htim); - } - - /* Return function status */ - return HAL_OK; -} - -/** - * @brief Stops the TIM PWM signal generation in DMA mode. - * @param htim TIM PWM handle - * @param Channel TIM Channels to be disabled - * This parameter can be one of the following values: - * @arg TIM_CHANNEL_1: TIM Channel 1 selected - * @arg TIM_CHANNEL_2: TIM Channel 2 selected - * @arg TIM_CHANNEL_3: TIM Channel 3 selected - * @arg TIM_CHANNEL_4: TIM Channel 4 selected - * @retval HAL status - */ -HAL_StatusTypeDef HAL_TIM_PWM_Stop_DMA(TIM_HandleTypeDef *htim, uint32_t Channel) -{ - /* Check the parameters */ - assert_param(IS_TIM_CCX_INSTANCE(htim->Instance, Channel)); - - switch (Channel) - { - case TIM_CHANNEL_1: - { - /* Disable the TIM Capture/Compare 1 DMA request */ - __HAL_TIM_DISABLE_DMA(htim, TIM_DMA_CC1); - (void)HAL_DMA_Abort_IT(htim->hdma[TIM_DMA_ID_CC1]); - break; - } - - case TIM_CHANNEL_2: - { - /* Disable the TIM Capture/Compare 2 DMA request */ - __HAL_TIM_DISABLE_DMA(htim, TIM_DMA_CC2); - (void)HAL_DMA_Abort_IT(htim->hdma[TIM_DMA_ID_CC2]); - break; - } - - case TIM_CHANNEL_3: - { - /* Disable the TIM Capture/Compare 3 DMA request */ - __HAL_TIM_DISABLE_DMA(htim, TIM_DMA_CC3); - (void)HAL_DMA_Abort_IT(htim->hdma[TIM_DMA_ID_CC3]); - break; - } - - case TIM_CHANNEL_4: - { - /* Disable the TIM Capture/Compare 4 interrupt */ - __HAL_TIM_DISABLE_DMA(htim, TIM_DMA_CC4); - (void)HAL_DMA_Abort_IT(htim->hdma[TIM_DMA_ID_CC4]); - break; - } - - default: - break; - } - - /* Disable the Capture compare channel */ - TIM_CCxChannelCmd(htim->Instance, Channel, TIM_CCx_DISABLE); - - if (IS_TIM_BREAK_INSTANCE(htim->Instance) != RESET) - { - /* Disable the Main Output */ - __HAL_TIM_MOE_DISABLE(htim); - } - - /* Disable the Peripheral */ - __HAL_TIM_DISABLE(htim); - - /* Change the htim state */ - htim->State = HAL_TIM_STATE_READY; - - /* Return function status */ - return HAL_OK; -} - -/** - * @} - */ - -/** @defgroup TIM_Exported_Functions_Group4 TIM Input Capture functions - * @brief TIM Input Capture functions - * -@verbatim - ============================================================================== - ##### TIM Input Capture functions ##### - ============================================================================== - [..] - This section provides functions allowing to: - (+) Initialize and configure the TIM Input Capture. - (+) De-initialize the TIM Input Capture. - (+) Start the TIM Input Capture. - (+) Stop the TIM Input Capture. - (+) Start the TIM Input Capture and enable interrupt. - (+) Stop the TIM Input Capture and disable interrupt. - (+) Start the TIM Input Capture and enable DMA transfer. - (+) Stop the TIM Input Capture and disable DMA transfer. - -@endverbatim - * @{ - */ -/** - * @brief Initializes the TIM Input Capture Time base according to the specified - * parameters in the TIM_HandleTypeDef and initializes the associated handle. - * @note Switching from Center Aligned counter mode to Edge counter mode (or reverse) - * requires a timer reset to avoid unexpected direction - * due to DIR bit readonly in center aligned mode. - * Ex: call @ref HAL_TIM_IC_DeInit() before HAL_TIM_IC_Init() - * @param htim TIM Input Capture handle - * @retval HAL status - */ -HAL_StatusTypeDef HAL_TIM_IC_Init(TIM_HandleTypeDef *htim) -{ - /* Check the TIM handle allocation */ - if (htim == NULL) - { - return HAL_ERROR; - } - - /* Check the parameters */ - assert_param(IS_TIM_INSTANCE(htim->Instance)); - assert_param(IS_TIM_COUNTER_MODE(htim->Init.CounterMode)); - assert_param(IS_TIM_CLOCKDIVISION_DIV(htim->Init.ClockDivision)); - assert_param(IS_TIM_AUTORELOAD_PRELOAD(htim->Init.AutoReloadPreload)); - - if (htim->State == HAL_TIM_STATE_RESET) - { - /* Allocate lock resource and initialize it */ - htim->Lock = HAL_UNLOCKED; - -#if (USE_HAL_TIM_REGISTER_CALLBACKS == 1) - /* Reset interrupt callbacks to legacy weak callbacks */ - TIM_ResetCallback(htim); - - if (htim->IC_MspInitCallback == NULL) - { - htim->IC_MspInitCallback = HAL_TIM_IC_MspInit; - } - /* Init the low level hardware : GPIO, CLOCK, NVIC */ - htim->IC_MspInitCallback(htim); -#else - /* Init the low level hardware : GPIO, CLOCK, NVIC and DMA */ - HAL_TIM_IC_MspInit(htim); -#endif /* USE_HAL_TIM_REGISTER_CALLBACKS */ - } - - /* Set the TIM state */ - htim->State = HAL_TIM_STATE_BUSY; - - /* Init the base time for the input capture */ - TIM_Base_SetConfig(htim->Instance, &htim->Init); - - /* Initialize the TIM state*/ - htim->State = HAL_TIM_STATE_READY; - - return HAL_OK; -} - -/** - * @brief DeInitializes the TIM peripheral - * @param htim TIM Input Capture handle - * @retval HAL status - */ -HAL_StatusTypeDef HAL_TIM_IC_DeInit(TIM_HandleTypeDef *htim) -{ - /* Check the parameters */ - assert_param(IS_TIM_INSTANCE(htim->Instance)); - - htim->State = HAL_TIM_STATE_BUSY; - - /* Disable the TIM Peripheral Clock */ - __HAL_TIM_DISABLE(htim); - -#if (USE_HAL_TIM_REGISTER_CALLBACKS == 1) - if (htim->IC_MspDeInitCallback == NULL) - { - htim->IC_MspDeInitCallback = HAL_TIM_IC_MspDeInit; - } - /* DeInit the low level hardware */ - htim->IC_MspDeInitCallback(htim); -#else - /* DeInit the low level hardware: GPIO, CLOCK, NVIC and DMA */ - HAL_TIM_IC_MspDeInit(htim); -#endif /* USE_HAL_TIM_REGISTER_CALLBACKS */ - - /* Change TIM state */ - htim->State = HAL_TIM_STATE_RESET; - - /* Release Lock */ - __HAL_UNLOCK(htim); - - return HAL_OK; -} - -/** - * @brief Initializes the TIM Input Capture MSP. - * @param htim TIM Input Capture handle - * @retval None - */ -__weak void HAL_TIM_IC_MspInit(TIM_HandleTypeDef *htim) -{ - /* Prevent unused argument(s) compilation warning */ - UNUSED(htim); - - /* NOTE : This function should not be modified, when the callback is needed, - the HAL_TIM_IC_MspInit could be implemented in the user file - */ -} - -/** - * @brief DeInitializes TIM Input Capture MSP. - * @param htim TIM handle - * @retval None - */ -__weak void HAL_TIM_IC_MspDeInit(TIM_HandleTypeDef *htim) -{ - /* Prevent unused argument(s) compilation warning */ - UNUSED(htim); - - /* NOTE : This function should not be modified, when the callback is needed, - the HAL_TIM_IC_MspDeInit could be implemented in the user file - */ -} - -/** - * @brief Starts the TIM Input Capture measurement. - * @param htim TIM Input Capture handle - * @param Channel TIM Channels to be enabled - * This parameter can be one of the following values: - * @arg TIM_CHANNEL_1: TIM Channel 1 selected - * @arg TIM_CHANNEL_2: TIM Channel 2 selected - * @arg TIM_CHANNEL_3: TIM Channel 3 selected - * @arg TIM_CHANNEL_4: TIM Channel 4 selected - * @retval HAL status - */ -HAL_StatusTypeDef HAL_TIM_IC_Start(TIM_HandleTypeDef *htim, uint32_t Channel) -{ - uint32_t tmpsmcr; - - /* Check the parameters */ - assert_param(IS_TIM_CCX_INSTANCE(htim->Instance, Channel)); - - /* Enable the Input Capture channel */ - TIM_CCxChannelCmd(htim->Instance, Channel, TIM_CCx_ENABLE); - - /* Enable the Peripheral, except in trigger mode where enable is automatically done with trigger */ - tmpsmcr = htim->Instance->SMCR & TIM_SMCR_SMS; - if (!IS_TIM_SLAVEMODE_TRIGGER_ENABLED(tmpsmcr)) - { - __HAL_TIM_ENABLE(htim); - } - - /* Return function status */ - return HAL_OK; -} - -/** - * @brief Stops the TIM Input Capture measurement. - * @param htim TIM Input Capture handle - * @param Channel TIM Channels to be disabled - * This parameter can be one of the following values: - * @arg TIM_CHANNEL_1: TIM Channel 1 selected - * @arg TIM_CHANNEL_2: TIM Channel 2 selected - * @arg TIM_CHANNEL_3: TIM Channel 3 selected - * @arg TIM_CHANNEL_4: TIM Channel 4 selected - * @retval HAL status - */ -HAL_StatusTypeDef HAL_TIM_IC_Stop(TIM_HandleTypeDef *htim, uint32_t Channel) -{ - /* Check the parameters */ - assert_param(IS_TIM_CCX_INSTANCE(htim->Instance, Channel)); - - /* Disable the Input Capture channel */ - TIM_CCxChannelCmd(htim->Instance, Channel, TIM_CCx_DISABLE); - - /* Disable the Peripheral */ - __HAL_TIM_DISABLE(htim); - - /* Return function status */ - return HAL_OK; -} - -/** - * @brief Starts the TIM Input Capture measurement in interrupt mode. - * @param htim TIM Input Capture handle - * @param Channel TIM Channels to be enabled - * This parameter can be one of the following values: - * @arg TIM_CHANNEL_1: TIM Channel 1 selected - * @arg TIM_CHANNEL_2: TIM Channel 2 selected - * @arg TIM_CHANNEL_3: TIM Channel 3 selected - * @arg TIM_CHANNEL_4: TIM Channel 4 selected - * @retval HAL status - */ -HAL_StatusTypeDef HAL_TIM_IC_Start_IT(TIM_HandleTypeDef *htim, uint32_t Channel) -{ - uint32_t tmpsmcr; - - /* Check the parameters */ - assert_param(IS_TIM_CCX_INSTANCE(htim->Instance, Channel)); - - switch (Channel) - { - case TIM_CHANNEL_1: - { - /* Enable the TIM Capture/Compare 1 interrupt */ - __HAL_TIM_ENABLE_IT(htim, TIM_IT_CC1); - break; - } - - case TIM_CHANNEL_2: - { - /* Enable the TIM Capture/Compare 2 interrupt */ - __HAL_TIM_ENABLE_IT(htim, TIM_IT_CC2); - break; - } - - case TIM_CHANNEL_3: - { - /* Enable the TIM Capture/Compare 3 interrupt */ - __HAL_TIM_ENABLE_IT(htim, TIM_IT_CC3); - break; - } - - case TIM_CHANNEL_4: - { - /* Enable the TIM Capture/Compare 4 interrupt */ - __HAL_TIM_ENABLE_IT(htim, TIM_IT_CC4); - break; - } - - default: - break; - } - /* Enable the Input Capture channel */ - TIM_CCxChannelCmd(htim->Instance, Channel, TIM_CCx_ENABLE); - - /* Enable the Peripheral, except in trigger mode where enable is automatically done with trigger */ - tmpsmcr = htim->Instance->SMCR & TIM_SMCR_SMS; - if (!IS_TIM_SLAVEMODE_TRIGGER_ENABLED(tmpsmcr)) - { - __HAL_TIM_ENABLE(htim); - } - - /* Return function status */ - return HAL_OK; -} - -/** - * @brief Stops the TIM Input Capture measurement in interrupt mode. - * @param htim TIM Input Capture handle - * @param Channel TIM Channels to be disabled - * This parameter can be one of the following values: - * @arg TIM_CHANNEL_1: TIM Channel 1 selected - * @arg TIM_CHANNEL_2: TIM Channel 2 selected - * @arg TIM_CHANNEL_3: TIM Channel 3 selected - * @arg TIM_CHANNEL_4: TIM Channel 4 selected - * @retval HAL status - */ -HAL_StatusTypeDef HAL_TIM_IC_Stop_IT(TIM_HandleTypeDef *htim, uint32_t Channel) -{ - /* Check the parameters */ - assert_param(IS_TIM_CCX_INSTANCE(htim->Instance, Channel)); - - switch (Channel) - { - case TIM_CHANNEL_1: - { - /* Disable the TIM Capture/Compare 1 interrupt */ - __HAL_TIM_DISABLE_IT(htim, TIM_IT_CC1); - break; - } - - case TIM_CHANNEL_2: - { - /* Disable the TIM Capture/Compare 2 interrupt */ - __HAL_TIM_DISABLE_IT(htim, TIM_IT_CC2); - break; - } - - case TIM_CHANNEL_3: - { - /* Disable the TIM Capture/Compare 3 interrupt */ - __HAL_TIM_DISABLE_IT(htim, TIM_IT_CC3); - break; - } - - case TIM_CHANNEL_4: - { - /* Disable the TIM Capture/Compare 4 interrupt */ - __HAL_TIM_DISABLE_IT(htim, TIM_IT_CC4); - break; - } - - default: - break; - } - - /* Disable the Input Capture channel */ - TIM_CCxChannelCmd(htim->Instance, Channel, TIM_CCx_DISABLE); - - /* Disable the Peripheral */ - __HAL_TIM_DISABLE(htim); - - /* Return function status */ - return HAL_OK; -} - -/** - * @brief Starts the TIM Input Capture measurement in DMA mode. - * @param htim TIM Input Capture handle - * @param Channel TIM Channels to be enabled - * This parameter can be one of the following values: - * @arg TIM_CHANNEL_1: TIM Channel 1 selected - * @arg TIM_CHANNEL_2: TIM Channel 2 selected - * @arg TIM_CHANNEL_3: TIM Channel 3 selected - * @arg TIM_CHANNEL_4: TIM Channel 4 selected - * @param pData The destination Buffer address. - * @param Length The length of data to be transferred from TIM peripheral to memory. - * @retval HAL status - */ -HAL_StatusTypeDef HAL_TIM_IC_Start_DMA(TIM_HandleTypeDef *htim, uint32_t Channel, uint32_t *pData, uint16_t Length) -{ - uint32_t tmpsmcr; - - /* Check the parameters */ - assert_param(IS_TIM_CCX_INSTANCE(htim->Instance, Channel)); - assert_param(IS_TIM_DMA_CC_INSTANCE(htim->Instance)); - - if ((htim->State == HAL_TIM_STATE_BUSY)) - { - return HAL_BUSY; - } - else if ((htim->State == HAL_TIM_STATE_READY)) - { - if ((pData == NULL) && (Length > 0U)) - { - return HAL_ERROR; - } - else - { - htim->State = HAL_TIM_STATE_BUSY; - } - } - else - { - /* nothing to do */ - } - - switch (Channel) - { - case TIM_CHANNEL_1: - { - /* Set the DMA capture callbacks */ - htim->hdma[TIM_DMA_ID_CC1]->XferCpltCallback = TIM_DMACaptureCplt; - htim->hdma[TIM_DMA_ID_CC1]->XferHalfCpltCallback = TIM_DMACaptureHalfCplt; - - /* Set the DMA error callback */ - htim->hdma[TIM_DMA_ID_CC1]->XferErrorCallback = TIM_DMAError ; - - /* Enable the DMA stream */ - if (HAL_DMA_Start_IT(htim->hdma[TIM_DMA_ID_CC1], (uint32_t)&htim->Instance->CCR1, (uint32_t)pData, Length) != HAL_OK) - { - return HAL_ERROR; - } - /* Enable the TIM Capture/Compare 1 DMA request */ - __HAL_TIM_ENABLE_DMA(htim, TIM_DMA_CC1); - break; - } - - case TIM_CHANNEL_2: - { - /* Set the DMA capture callbacks */ - htim->hdma[TIM_DMA_ID_CC2]->XferCpltCallback = TIM_DMACaptureCplt; - htim->hdma[TIM_DMA_ID_CC2]->XferHalfCpltCallback = TIM_DMACaptureHalfCplt; - - /* Set the DMA error callback */ - htim->hdma[TIM_DMA_ID_CC2]->XferErrorCallback = TIM_DMAError ; - - /* Enable the DMA stream */ - if (HAL_DMA_Start_IT(htim->hdma[TIM_DMA_ID_CC2], (uint32_t)&htim->Instance->CCR2, (uint32_t)pData, Length) != HAL_OK) - { - return HAL_ERROR; - } - /* Enable the TIM Capture/Compare 2 DMA request */ - __HAL_TIM_ENABLE_DMA(htim, TIM_DMA_CC2); - break; - } - - case TIM_CHANNEL_3: - { - /* Set the DMA capture callbacks */ - htim->hdma[TIM_DMA_ID_CC3]->XferCpltCallback = TIM_DMACaptureCplt; - htim->hdma[TIM_DMA_ID_CC3]->XferHalfCpltCallback = TIM_DMACaptureHalfCplt; - - /* Set the DMA error callback */ - htim->hdma[TIM_DMA_ID_CC3]->XferErrorCallback = TIM_DMAError ; - - /* Enable the DMA stream */ - if (HAL_DMA_Start_IT(htim->hdma[TIM_DMA_ID_CC3], (uint32_t)&htim->Instance->CCR3, (uint32_t)pData, Length) != HAL_OK) - { - return HAL_ERROR; - } - /* Enable the TIM Capture/Compare 3 DMA request */ - __HAL_TIM_ENABLE_DMA(htim, TIM_DMA_CC3); - break; - } - - case TIM_CHANNEL_4: - { - /* Set the DMA capture callbacks */ - htim->hdma[TIM_DMA_ID_CC4]->XferCpltCallback = TIM_DMACaptureCplt; - htim->hdma[TIM_DMA_ID_CC4]->XferHalfCpltCallback = TIM_DMACaptureHalfCplt; - - /* Set the DMA error callback */ - htim->hdma[TIM_DMA_ID_CC4]->XferErrorCallback = TIM_DMAError ; - - /* Enable the DMA stream */ - if (HAL_DMA_Start_IT(htim->hdma[TIM_DMA_ID_CC4], (uint32_t)&htim->Instance->CCR4, (uint32_t)pData, Length) != HAL_OK) - { - return HAL_ERROR; - } - /* Enable the TIM Capture/Compare 4 DMA request */ - __HAL_TIM_ENABLE_DMA(htim, TIM_DMA_CC4); - break; - } - - default: - break; - } - - /* Enable the Input Capture channel */ - TIM_CCxChannelCmd(htim->Instance, Channel, TIM_CCx_ENABLE); - - /* Enable the Peripheral, except in trigger mode where enable is automatically done with trigger */ - tmpsmcr = htim->Instance->SMCR & TIM_SMCR_SMS; - if (!IS_TIM_SLAVEMODE_TRIGGER_ENABLED(tmpsmcr)) - { - __HAL_TIM_ENABLE(htim); - } - - /* Return function status */ - return HAL_OK; -} - -/** - * @brief Stops the TIM Input Capture measurement in DMA mode. - * @param htim TIM Input Capture handle - * @param Channel TIM Channels to be disabled - * This parameter can be one of the following values: - * @arg TIM_CHANNEL_1: TIM Channel 1 selected - * @arg TIM_CHANNEL_2: TIM Channel 2 selected - * @arg TIM_CHANNEL_3: TIM Channel 3 selected - * @arg TIM_CHANNEL_4: TIM Channel 4 selected - * @retval HAL status - */ -HAL_StatusTypeDef HAL_TIM_IC_Stop_DMA(TIM_HandleTypeDef *htim, uint32_t Channel) -{ - /* Check the parameters */ - assert_param(IS_TIM_CCX_INSTANCE(htim->Instance, Channel)); - assert_param(IS_TIM_DMA_CC_INSTANCE(htim->Instance)); - - switch (Channel) - { - case TIM_CHANNEL_1: - { - /* Disable the TIM Capture/Compare 1 DMA request */ - __HAL_TIM_DISABLE_DMA(htim, TIM_DMA_CC1); - (void)HAL_DMA_Abort_IT(htim->hdma[TIM_DMA_ID_CC1]); - break; - } - - case TIM_CHANNEL_2: - { - /* Disable the TIM Capture/Compare 2 DMA request */ - __HAL_TIM_DISABLE_DMA(htim, TIM_DMA_CC2); - (void)HAL_DMA_Abort_IT(htim->hdma[TIM_DMA_ID_CC2]); - break; - } - - case TIM_CHANNEL_3: - { - /* Disable the TIM Capture/Compare 3 DMA request */ - __HAL_TIM_DISABLE_DMA(htim, TIM_DMA_CC3); - (void)HAL_DMA_Abort_IT(htim->hdma[TIM_DMA_ID_CC3]); - break; - } - - case TIM_CHANNEL_4: - { - /* Disable the TIM Capture/Compare 4 DMA request */ - __HAL_TIM_DISABLE_DMA(htim, TIM_DMA_CC4); - (void)HAL_DMA_Abort_IT(htim->hdma[TIM_DMA_ID_CC4]); - break; - } - - default: - break; - } - - /* Disable the Input Capture channel */ - TIM_CCxChannelCmd(htim->Instance, Channel, TIM_CCx_DISABLE); - - /* Disable the Peripheral */ - __HAL_TIM_DISABLE(htim); - - /* Change the htim state */ - htim->State = HAL_TIM_STATE_READY; - - /* Return function status */ - return HAL_OK; -} -/** - * @} - */ - -/** @defgroup TIM_Exported_Functions_Group5 TIM One Pulse functions - * @brief TIM One Pulse functions - * -@verbatim - ============================================================================== - ##### TIM One Pulse functions ##### - ============================================================================== - [..] - This section provides functions allowing to: - (+) Initialize and configure the TIM One Pulse. - (+) De-initialize the TIM One Pulse. - (+) Start the TIM One Pulse. - (+) Stop the TIM One Pulse. - (+) Start the TIM One Pulse and enable interrupt. - (+) Stop the TIM One Pulse and disable interrupt. - (+) Start the TIM One Pulse and enable DMA transfer. - (+) Stop the TIM One Pulse and disable DMA transfer. - -@endverbatim - * @{ - */ -/** - * @brief Initializes the TIM One Pulse Time Base according to the specified - * parameters in the TIM_HandleTypeDef and initializes the associated handle. - * @note Switching from Center Aligned counter mode to Edge counter mode (or reverse) - * requires a timer reset to avoid unexpected direction - * due to DIR bit readonly in center aligned mode. - * Ex: call @ref HAL_TIM_OnePulse_DeInit() before HAL_TIM_OnePulse_Init() - * @param htim TIM One Pulse handle - * @param OnePulseMode Select the One pulse mode. - * This parameter can be one of the following values: - * @arg TIM_OPMODE_SINGLE: Only one pulse will be generated. - * @arg TIM_OPMODE_REPETITIVE: Repetitive pulses will be generated. - * @retval HAL status - */ -HAL_StatusTypeDef HAL_TIM_OnePulse_Init(TIM_HandleTypeDef *htim, uint32_t OnePulseMode) -{ - /* Check the TIM handle allocation */ - if (htim == NULL) - { - return HAL_ERROR; - } - - /* Check the parameters */ - assert_param(IS_TIM_INSTANCE(htim->Instance)); - assert_param(IS_TIM_COUNTER_MODE(htim->Init.CounterMode)); - assert_param(IS_TIM_CLOCKDIVISION_DIV(htim->Init.ClockDivision)); - assert_param(IS_TIM_OPM_MODE(OnePulseMode)); - assert_param(IS_TIM_AUTORELOAD_PRELOAD(htim->Init.AutoReloadPreload)); - - if (htim->State == HAL_TIM_STATE_RESET) - { - /* Allocate lock resource and initialize it */ - htim->Lock = HAL_UNLOCKED; - -#if (USE_HAL_TIM_REGISTER_CALLBACKS == 1) - /* Reset interrupt callbacks to legacy weak callbacks */ - TIM_ResetCallback(htim); - - if (htim->OnePulse_MspInitCallback == NULL) - { - htim->OnePulse_MspInitCallback = HAL_TIM_OnePulse_MspInit; - } - /* Init the low level hardware : GPIO, CLOCK, NVIC */ - htim->OnePulse_MspInitCallback(htim); -#else - /* Init the low level hardware : GPIO, CLOCK, NVIC and DMA */ - HAL_TIM_OnePulse_MspInit(htim); -#endif /* USE_HAL_TIM_REGISTER_CALLBACKS */ - } - - /* Set the TIM state */ - htim->State = HAL_TIM_STATE_BUSY; - - /* Configure the Time base in the One Pulse Mode */ - TIM_Base_SetConfig(htim->Instance, &htim->Init); - - /* Reset the OPM Bit */ - htim->Instance->CR1 &= ~TIM_CR1_OPM; - - /* Configure the OPM Mode */ - htim->Instance->CR1 |= OnePulseMode; - - /* Initialize the TIM state*/ - htim->State = HAL_TIM_STATE_READY; - - return HAL_OK; -} - -/** - * @brief DeInitializes the TIM One Pulse - * @param htim TIM One Pulse handle - * @retval HAL status - */ -HAL_StatusTypeDef HAL_TIM_OnePulse_DeInit(TIM_HandleTypeDef *htim) -{ - /* Check the parameters */ - assert_param(IS_TIM_INSTANCE(htim->Instance)); - - htim->State = HAL_TIM_STATE_BUSY; - - /* Disable the TIM Peripheral Clock */ - __HAL_TIM_DISABLE(htim); - -#if (USE_HAL_TIM_REGISTER_CALLBACKS == 1) - if (htim->OnePulse_MspDeInitCallback == NULL) - { - htim->OnePulse_MspDeInitCallback = HAL_TIM_OnePulse_MspDeInit; - } - /* DeInit the low level hardware */ - htim->OnePulse_MspDeInitCallback(htim); -#else - /* DeInit the low level hardware: GPIO, CLOCK, NVIC */ - HAL_TIM_OnePulse_MspDeInit(htim); -#endif /* USE_HAL_TIM_REGISTER_CALLBACKS */ - - /* Change TIM state */ - htim->State = HAL_TIM_STATE_RESET; - - /* Release Lock */ - __HAL_UNLOCK(htim); - - return HAL_OK; -} - -/** - * @brief Initializes the TIM One Pulse MSP. - * @param htim TIM One Pulse handle - * @retval None - */ -__weak void HAL_TIM_OnePulse_MspInit(TIM_HandleTypeDef *htim) -{ - /* Prevent unused argument(s) compilation warning */ - UNUSED(htim); - - /* NOTE : This function should not be modified, when the callback is needed, - the HAL_TIM_OnePulse_MspInit could be implemented in the user file - */ -} - -/** - * @brief DeInitializes TIM One Pulse MSP. - * @param htim TIM One Pulse handle - * @retval None - */ -__weak void HAL_TIM_OnePulse_MspDeInit(TIM_HandleTypeDef *htim) -{ - /* Prevent unused argument(s) compilation warning */ - UNUSED(htim); - - /* NOTE : This function should not be modified, when the callback is needed, - the HAL_TIM_OnePulse_MspDeInit could be implemented in the user file - */ -} - -/** - * @brief Starts the TIM One Pulse signal generation. - * @param htim TIM One Pulse handle - * @param OutputChannel TIM Channels to be enabled - * This parameter can be one of the following values: - * @arg TIM_CHANNEL_1: TIM Channel 1 selected - * @arg TIM_CHANNEL_2: TIM Channel 2 selected - * @retval HAL status - */ -HAL_StatusTypeDef HAL_TIM_OnePulse_Start(TIM_HandleTypeDef *htim, uint32_t OutputChannel) -{ - /* Prevent unused argument(s) compilation warning */ - UNUSED(OutputChannel); - - /* Enable the Capture compare and the Input Capture channels - (in the OPM Mode the two possible channels that can be used are TIM_CHANNEL_1 and TIM_CHANNEL_2) - if TIM_CHANNEL_1 is used as output, the TIM_CHANNEL_2 will be used as input and - if TIM_CHANNEL_1 is used as input, the TIM_CHANNEL_2 will be used as output - in all combinations, the TIM_CHANNEL_1 and TIM_CHANNEL_2 should be enabled together - - No need to enable the counter, it's enabled automatically by hardware - (the counter starts in response to a stimulus and generate a pulse */ - - TIM_CCxChannelCmd(htim->Instance, TIM_CHANNEL_1, TIM_CCx_ENABLE); - TIM_CCxChannelCmd(htim->Instance, TIM_CHANNEL_2, TIM_CCx_ENABLE); - - if (IS_TIM_BREAK_INSTANCE(htim->Instance) != RESET) - { - /* Enable the main output */ - __HAL_TIM_MOE_ENABLE(htim); - } - - /* Return function status */ - return HAL_OK; -} - -/** - * @brief Stops the TIM One Pulse signal generation. - * @param htim TIM One Pulse handle - * @param OutputChannel TIM Channels to be disable - * This parameter can be one of the following values: - * @arg TIM_CHANNEL_1: TIM Channel 1 selected - * @arg TIM_CHANNEL_2: TIM Channel 2 selected - * @retval HAL status - */ -HAL_StatusTypeDef HAL_TIM_OnePulse_Stop(TIM_HandleTypeDef *htim, uint32_t OutputChannel) -{ - /* Prevent unused argument(s) compilation warning */ - UNUSED(OutputChannel); - - /* Disable the Capture compare and the Input Capture channels - (in the OPM Mode the two possible channels that can be used are TIM_CHANNEL_1 and TIM_CHANNEL_2) - if TIM_CHANNEL_1 is used as output, the TIM_CHANNEL_2 will be used as input and - if TIM_CHANNEL_1 is used as input, the TIM_CHANNEL_2 will be used as output - in all combinations, the TIM_CHANNEL_1 and TIM_CHANNEL_2 should be disabled together */ - - TIM_CCxChannelCmd(htim->Instance, TIM_CHANNEL_1, TIM_CCx_DISABLE); - TIM_CCxChannelCmd(htim->Instance, TIM_CHANNEL_2, TIM_CCx_DISABLE); - - if (IS_TIM_BREAK_INSTANCE(htim->Instance) != RESET) - { - /* Disable the Main Output */ - __HAL_TIM_MOE_DISABLE(htim); - } - - /* Disable the Peripheral */ - __HAL_TIM_DISABLE(htim); - - /* Return function status */ - return HAL_OK; -} - -/** - * @brief Starts the TIM One Pulse signal generation in interrupt mode. - * @param htim TIM One Pulse handle - * @param OutputChannel TIM Channels to be enabled - * This parameter can be one of the following values: - * @arg TIM_CHANNEL_1: TIM Channel 1 selected - * @arg TIM_CHANNEL_2: TIM Channel 2 selected - * @retval HAL status - */ -HAL_StatusTypeDef HAL_TIM_OnePulse_Start_IT(TIM_HandleTypeDef *htim, uint32_t OutputChannel) -{ - /* Prevent unused argument(s) compilation warning */ - UNUSED(OutputChannel); - - /* Enable the Capture compare and the Input Capture channels - (in the OPM Mode the two possible channels that can be used are TIM_CHANNEL_1 and TIM_CHANNEL_2) - if TIM_CHANNEL_1 is used as output, the TIM_CHANNEL_2 will be used as input and - if TIM_CHANNEL_1 is used as input, the TIM_CHANNEL_2 will be used as output - in all combinations, the TIM_CHANNEL_1 and TIM_CHANNEL_2 should be enabled together - - No need to enable the counter, it's enabled automatically by hardware - (the counter starts in response to a stimulus and generate a pulse */ - - /* Enable the TIM Capture/Compare 1 interrupt */ - __HAL_TIM_ENABLE_IT(htim, TIM_IT_CC1); - - /* Enable the TIM Capture/Compare 2 interrupt */ - __HAL_TIM_ENABLE_IT(htim, TIM_IT_CC2); - - TIM_CCxChannelCmd(htim->Instance, TIM_CHANNEL_1, TIM_CCx_ENABLE); - TIM_CCxChannelCmd(htim->Instance, TIM_CHANNEL_2, TIM_CCx_ENABLE); - - if (IS_TIM_BREAK_INSTANCE(htim->Instance) != RESET) - { - /* Enable the main output */ - __HAL_TIM_MOE_ENABLE(htim); - } - - /* Return function status */ - return HAL_OK; -} - -/** - * @brief Stops the TIM One Pulse signal generation in interrupt mode. - * @param htim TIM One Pulse handle - * @param OutputChannel TIM Channels to be enabled - * This parameter can be one of the following values: - * @arg TIM_CHANNEL_1: TIM Channel 1 selected - * @arg TIM_CHANNEL_2: TIM Channel 2 selected - * @retval HAL status - */ -HAL_StatusTypeDef HAL_TIM_OnePulse_Stop_IT(TIM_HandleTypeDef *htim, uint32_t OutputChannel) -{ - /* Prevent unused argument(s) compilation warning */ - UNUSED(OutputChannel); - - /* Disable the TIM Capture/Compare 1 interrupt */ - __HAL_TIM_DISABLE_IT(htim, TIM_IT_CC1); - - /* Disable the TIM Capture/Compare 2 interrupt */ - __HAL_TIM_DISABLE_IT(htim, TIM_IT_CC2); - - /* Disable the Capture compare and the Input Capture channels - (in the OPM Mode the two possible channels that can be used are TIM_CHANNEL_1 and TIM_CHANNEL_2) - if TIM_CHANNEL_1 is used as output, the TIM_CHANNEL_2 will be used as input and - if TIM_CHANNEL_1 is used as input, the TIM_CHANNEL_2 will be used as output - in all combinations, the TIM_CHANNEL_1 and TIM_CHANNEL_2 should be disabled together */ - TIM_CCxChannelCmd(htim->Instance, TIM_CHANNEL_1, TIM_CCx_DISABLE); - TIM_CCxChannelCmd(htim->Instance, TIM_CHANNEL_2, TIM_CCx_DISABLE); - - if (IS_TIM_BREAK_INSTANCE(htim->Instance) != RESET) - { - /* Disable the Main Output */ - __HAL_TIM_MOE_DISABLE(htim); - } - - /* Disable the Peripheral */ - __HAL_TIM_DISABLE(htim); - - /* Return function status */ - return HAL_OK; -} - -/** - * @} - */ - -/** @defgroup TIM_Exported_Functions_Group6 TIM Encoder functions - * @brief TIM Encoder functions - * -@verbatim - ============================================================================== - ##### TIM Encoder functions ##### - ============================================================================== - [..] - This section provides functions allowing to: - (+) Initialize and configure the TIM Encoder. - (+) De-initialize the TIM Encoder. - (+) Start the TIM Encoder. - (+) Stop the TIM Encoder. - (+) Start the TIM Encoder and enable interrupt. - (+) Stop the TIM Encoder and disable interrupt. - (+) Start the TIM Encoder and enable DMA transfer. - (+) Stop the TIM Encoder and disable DMA transfer. - -@endverbatim - * @{ - */ -/** - * @brief Initializes the TIM Encoder Interface and initialize the associated handle. - * @note Switching from Center Aligned counter mode to Edge counter mode (or reverse) - * requires a timer reset to avoid unexpected direction - * due to DIR bit readonly in center aligned mode. - * Ex: call @ref HAL_TIM_Encoder_DeInit() before HAL_TIM_Encoder_Init() - * @note Encoder mode and External clock mode 2 are not compatible and must not be selected together - * Ex: A call for @ref HAL_TIM_Encoder_Init will erase the settings of @ref HAL_TIM_ConfigClockSource - * using TIM_CLOCKSOURCE_ETRMODE2 and vice versa - * @param htim TIM Encoder Interface handle - * @param sConfig TIM Encoder Interface configuration structure - * @retval HAL status - */ -HAL_StatusTypeDef HAL_TIM_Encoder_Init(TIM_HandleTypeDef *htim, TIM_Encoder_InitTypeDef *sConfig) -{ - uint32_t tmpsmcr; - uint32_t tmpccmr1; - uint32_t tmpccer; - - /* Check the TIM handle allocation */ - if (htim == NULL) - { - return HAL_ERROR; - } - - /* Check the parameters */ - assert_param(IS_TIM_COUNTER_MODE(htim->Init.CounterMode)); - assert_param(IS_TIM_CLOCKDIVISION_DIV(htim->Init.ClockDivision)); - assert_param(IS_TIM_AUTORELOAD_PRELOAD(htim->Init.AutoReloadPreload)); - assert_param(IS_TIM_CC2_INSTANCE(htim->Instance)); - assert_param(IS_TIM_ENCODER_MODE(sConfig->EncoderMode)); - assert_param(IS_TIM_IC_SELECTION(sConfig->IC1Selection)); - assert_param(IS_TIM_IC_SELECTION(sConfig->IC2Selection)); - assert_param(IS_TIM_IC_POLARITY(sConfig->IC1Polarity)); - assert_param(IS_TIM_IC_POLARITY(sConfig->IC2Polarity)); - assert_param(IS_TIM_IC_PRESCALER(sConfig->IC1Prescaler)); - assert_param(IS_TIM_IC_PRESCALER(sConfig->IC2Prescaler)); - assert_param(IS_TIM_IC_FILTER(sConfig->IC1Filter)); - assert_param(IS_TIM_IC_FILTER(sConfig->IC2Filter)); - - if (htim->State == HAL_TIM_STATE_RESET) - { - /* Allocate lock resource and initialize it */ - htim->Lock = HAL_UNLOCKED; - -#if (USE_HAL_TIM_REGISTER_CALLBACKS == 1) - /* Reset interrupt callbacks to legacy weak callbacks */ - TIM_ResetCallback(htim); - - if (htim->Encoder_MspInitCallback == NULL) - { - htim->Encoder_MspInitCallback = HAL_TIM_Encoder_MspInit; - } - /* Init the low level hardware : GPIO, CLOCK, NVIC */ - htim->Encoder_MspInitCallback(htim); -#else - /* Init the low level hardware : GPIO, CLOCK, NVIC and DMA */ - HAL_TIM_Encoder_MspInit(htim); -#endif /* USE_HAL_TIM_REGISTER_CALLBACKS */ - } - - /* Set the TIM state */ - htim->State = HAL_TIM_STATE_BUSY; - - /* Reset the SMS and ECE bits */ - htim->Instance->SMCR &= ~(TIM_SMCR_SMS | TIM_SMCR_ECE); - - /* Configure the Time base in the Encoder Mode */ - TIM_Base_SetConfig(htim->Instance, &htim->Init); - - /* Get the TIMx SMCR register value */ - tmpsmcr = htim->Instance->SMCR; - - /* Get the TIMx CCMR1 register value */ - tmpccmr1 = htim->Instance->CCMR1; - - /* Get the TIMx CCER register value */ - tmpccer = htim->Instance->CCER; - - /* Set the encoder Mode */ - tmpsmcr |= sConfig->EncoderMode; - - /* Select the Capture Compare 1 and the Capture Compare 2 as input */ - tmpccmr1 &= ~(TIM_CCMR1_CC1S | TIM_CCMR1_CC2S); - tmpccmr1 |= (sConfig->IC1Selection | (sConfig->IC2Selection << 8U)); - - /* Set the Capture Compare 1 and the Capture Compare 2 prescalers and filters */ - tmpccmr1 &= ~(TIM_CCMR1_IC1PSC | TIM_CCMR1_IC2PSC); - tmpccmr1 &= ~(TIM_CCMR1_IC1F | TIM_CCMR1_IC2F); - tmpccmr1 |= sConfig->IC1Prescaler | (sConfig->IC2Prescaler << 8U); - tmpccmr1 |= (sConfig->IC1Filter << 4U) | (sConfig->IC2Filter << 12U); - - /* Set the TI1 and the TI2 Polarities */ - tmpccer &= ~(TIM_CCER_CC1P | TIM_CCER_CC2P); - tmpccer &= ~(TIM_CCER_CC1NP | TIM_CCER_CC2NP); - tmpccer |= sConfig->IC1Polarity | (sConfig->IC2Polarity << 4U); - - /* Write to TIMx SMCR */ - htim->Instance->SMCR = tmpsmcr; - - /* Write to TIMx CCMR1 */ - htim->Instance->CCMR1 = tmpccmr1; - - /* Write to TIMx CCER */ - htim->Instance->CCER = tmpccer; - - /* Initialize the TIM state*/ - htim->State = HAL_TIM_STATE_READY; - - return HAL_OK; -} - - -/** - * @brief DeInitializes the TIM Encoder interface - * @param htim TIM Encoder Interface handle - * @retval HAL status - */ -HAL_StatusTypeDef HAL_TIM_Encoder_DeInit(TIM_HandleTypeDef *htim) -{ - /* Check the parameters */ - assert_param(IS_TIM_INSTANCE(htim->Instance)); - - htim->State = HAL_TIM_STATE_BUSY; - - /* Disable the TIM Peripheral Clock */ - __HAL_TIM_DISABLE(htim); - -#if (USE_HAL_TIM_REGISTER_CALLBACKS == 1) - if (htim->Encoder_MspDeInitCallback == NULL) - { - htim->Encoder_MspDeInitCallback = HAL_TIM_Encoder_MspDeInit; - } - /* DeInit the low level hardware */ - htim->Encoder_MspDeInitCallback(htim); -#else - /* DeInit the low level hardware: GPIO, CLOCK, NVIC */ - HAL_TIM_Encoder_MspDeInit(htim); -#endif /* USE_HAL_TIM_REGISTER_CALLBACKS */ - - /* Change TIM state */ - htim->State = HAL_TIM_STATE_RESET; - - /* Release Lock */ - __HAL_UNLOCK(htim); - - return HAL_OK; -} - -/** - * @brief Initializes the TIM Encoder Interface MSP. - * @param htim TIM Encoder Interface handle - * @retval None - */ -__weak void HAL_TIM_Encoder_MspInit(TIM_HandleTypeDef *htim) -{ - /* Prevent unused argument(s) compilation warning */ - UNUSED(htim); - - /* NOTE : This function should not be modified, when the callback is needed, - the HAL_TIM_Encoder_MspInit could be implemented in the user file - */ -} - -/** - * @brief DeInitializes TIM Encoder Interface MSP. - * @param htim TIM Encoder Interface handle - * @retval None - */ -__weak void HAL_TIM_Encoder_MspDeInit(TIM_HandleTypeDef *htim) -{ - /* Prevent unused argument(s) compilation warning */ - UNUSED(htim); - - /* NOTE : This function should not be modified, when the callback is needed, - the HAL_TIM_Encoder_MspDeInit could be implemented in the user file - */ -} - -/** - * @brief Starts the TIM Encoder Interface. - * @param htim TIM Encoder Interface handle - * @param Channel TIM Channels to be enabled - * This parameter can be one of the following values: - * @arg TIM_CHANNEL_1: TIM Channel 1 selected - * @arg TIM_CHANNEL_2: TIM Channel 2 selected - * @arg TIM_CHANNEL_ALL: TIM Channel 1 and TIM Channel 2 are selected - * @retval HAL status - */ -HAL_StatusTypeDef HAL_TIM_Encoder_Start(TIM_HandleTypeDef *htim, uint32_t Channel) -{ - /* Check the parameters */ - assert_param(IS_TIM_CC2_INSTANCE(htim->Instance)); - - /* Enable the encoder interface channels */ - switch (Channel) - { - case TIM_CHANNEL_1: - { - TIM_CCxChannelCmd(htim->Instance, TIM_CHANNEL_1, TIM_CCx_ENABLE); - break; - } - - case TIM_CHANNEL_2: - { - TIM_CCxChannelCmd(htim->Instance, TIM_CHANNEL_2, TIM_CCx_ENABLE); - break; - } - - default : - { - TIM_CCxChannelCmd(htim->Instance, TIM_CHANNEL_1, TIM_CCx_ENABLE); - TIM_CCxChannelCmd(htim->Instance, TIM_CHANNEL_2, TIM_CCx_ENABLE); - break; - } - } - /* Enable the Peripheral */ - __HAL_TIM_ENABLE(htim); - - /* Return function status */ - return HAL_OK; -} - -/** - * @brief Stops the TIM Encoder Interface. - * @param htim TIM Encoder Interface handle - * @param Channel TIM Channels to be disabled - * This parameter can be one of the following values: - * @arg TIM_CHANNEL_1: TIM Channel 1 selected - * @arg TIM_CHANNEL_2: TIM Channel 2 selected - * @arg TIM_CHANNEL_ALL: TIM Channel 1 and TIM Channel 2 are selected - * @retval HAL status - */ -HAL_StatusTypeDef HAL_TIM_Encoder_Stop(TIM_HandleTypeDef *htim, uint32_t Channel) -{ - /* Check the parameters */ - assert_param(IS_TIM_CC2_INSTANCE(htim->Instance)); - - /* Disable the Input Capture channels 1 and 2 - (in the EncoderInterface the two possible channels that can be used are TIM_CHANNEL_1 and TIM_CHANNEL_2) */ - switch (Channel) - { - case TIM_CHANNEL_1: - { - TIM_CCxChannelCmd(htim->Instance, TIM_CHANNEL_1, TIM_CCx_DISABLE); - break; - } - - case TIM_CHANNEL_2: - { - TIM_CCxChannelCmd(htim->Instance, TIM_CHANNEL_2, TIM_CCx_DISABLE); - break; - } - - default : - { - TIM_CCxChannelCmd(htim->Instance, TIM_CHANNEL_1, TIM_CCx_DISABLE); - TIM_CCxChannelCmd(htim->Instance, TIM_CHANNEL_2, TIM_CCx_DISABLE); - break; - } - } - - /* Disable the Peripheral */ - __HAL_TIM_DISABLE(htim); - - /* Return function status */ - return HAL_OK; -} - -/** - * @brief Starts the TIM Encoder Interface in interrupt mode. - * @param htim TIM Encoder Interface handle - * @param Channel TIM Channels to be enabled - * This parameter can be one of the following values: - * @arg TIM_CHANNEL_1: TIM Channel 1 selected - * @arg TIM_CHANNEL_2: TIM Channel 2 selected - * @arg TIM_CHANNEL_ALL: TIM Channel 1 and TIM Channel 2 are selected - * @retval HAL status - */ -HAL_StatusTypeDef HAL_TIM_Encoder_Start_IT(TIM_HandleTypeDef *htim, uint32_t Channel) -{ - /* Check the parameters */ - assert_param(IS_TIM_CC2_INSTANCE(htim->Instance)); - - /* Enable the encoder interface channels */ - /* Enable the capture compare Interrupts 1 and/or 2 */ - switch (Channel) - { - case TIM_CHANNEL_1: - { - TIM_CCxChannelCmd(htim->Instance, TIM_CHANNEL_1, TIM_CCx_ENABLE); - __HAL_TIM_ENABLE_IT(htim, TIM_IT_CC1); - break; - } - - case TIM_CHANNEL_2: - { - TIM_CCxChannelCmd(htim->Instance, TIM_CHANNEL_2, TIM_CCx_ENABLE); - __HAL_TIM_ENABLE_IT(htim, TIM_IT_CC2); - break; - } - - default : - { - TIM_CCxChannelCmd(htim->Instance, TIM_CHANNEL_1, TIM_CCx_ENABLE); - TIM_CCxChannelCmd(htim->Instance, TIM_CHANNEL_2, TIM_CCx_ENABLE); - __HAL_TIM_ENABLE_IT(htim, TIM_IT_CC1); - __HAL_TIM_ENABLE_IT(htim, TIM_IT_CC2); - break; - } - } - - /* Enable the Peripheral */ - __HAL_TIM_ENABLE(htim); - - /* Return function status */ - return HAL_OK; -} - -/** - * @brief Stops the TIM Encoder Interface in interrupt mode. - * @param htim TIM Encoder Interface handle - * @param Channel TIM Channels to be disabled - * This parameter can be one of the following values: - * @arg TIM_CHANNEL_1: TIM Channel 1 selected - * @arg TIM_CHANNEL_2: TIM Channel 2 selected - * @arg TIM_CHANNEL_ALL: TIM Channel 1 and TIM Channel 2 are selected - * @retval HAL status - */ -HAL_StatusTypeDef HAL_TIM_Encoder_Stop_IT(TIM_HandleTypeDef *htim, uint32_t Channel) -{ - /* Check the parameters */ - assert_param(IS_TIM_CC2_INSTANCE(htim->Instance)); - - /* Disable the Input Capture channels 1 and 2 - (in the EncoderInterface the two possible channels that can be used are TIM_CHANNEL_1 and TIM_CHANNEL_2) */ - if (Channel == TIM_CHANNEL_1) - { - TIM_CCxChannelCmd(htim->Instance, TIM_CHANNEL_1, TIM_CCx_DISABLE); - - /* Disable the capture compare Interrupts 1 */ - __HAL_TIM_DISABLE_IT(htim, TIM_IT_CC1); - } - else if (Channel == TIM_CHANNEL_2) - { - TIM_CCxChannelCmd(htim->Instance, TIM_CHANNEL_2, TIM_CCx_DISABLE); - - /* Disable the capture compare Interrupts 2 */ - __HAL_TIM_DISABLE_IT(htim, TIM_IT_CC2); - } - else - { - TIM_CCxChannelCmd(htim->Instance, TIM_CHANNEL_1, TIM_CCx_DISABLE); - TIM_CCxChannelCmd(htim->Instance, TIM_CHANNEL_2, TIM_CCx_DISABLE); - - /* Disable the capture compare Interrupts 1 and 2 */ - __HAL_TIM_DISABLE_IT(htim, TIM_IT_CC1); - __HAL_TIM_DISABLE_IT(htim, TIM_IT_CC2); - } - - /* Disable the Peripheral */ - __HAL_TIM_DISABLE(htim); - - /* Change the htim state */ - htim->State = HAL_TIM_STATE_READY; - - /* Return function status */ - return HAL_OK; -} - -/** - * @brief Starts the TIM Encoder Interface in DMA mode. - * @param htim TIM Encoder Interface handle - * @param Channel TIM Channels to be enabled - * This parameter can be one of the following values: - * @arg TIM_CHANNEL_1: TIM Channel 1 selected - * @arg TIM_CHANNEL_2: TIM Channel 2 selected - * @arg TIM_CHANNEL_ALL: TIM Channel 1 and TIM Channel 2 are selected - * @param pData1 The destination Buffer address for IC1. - * @param pData2 The destination Buffer address for IC2. - * @param Length The length of data to be transferred from TIM peripheral to memory. - * @retval HAL status - */ -HAL_StatusTypeDef HAL_TIM_Encoder_Start_DMA(TIM_HandleTypeDef *htim, uint32_t Channel, uint32_t *pData1, uint32_t *pData2, uint16_t Length) -{ - /* Check the parameters */ - assert_param(IS_TIM_DMA_CC_INSTANCE(htim->Instance)); - - if ((htim->State == HAL_TIM_STATE_BUSY)) - { - return HAL_BUSY; - } - else if ((htim->State == HAL_TIM_STATE_READY)) - { - if ((((pData1 == NULL) || (pData2 == NULL))) && (Length > 0U)) - { - return HAL_ERROR; - } - else - { - htim->State = HAL_TIM_STATE_BUSY; - } - } - else - { - /* nothing to do */ - } - - switch (Channel) - { - case TIM_CHANNEL_1: - { - /* Set the DMA capture callbacks */ - htim->hdma[TIM_DMA_ID_CC1]->XferCpltCallback = TIM_DMACaptureCplt; - htim->hdma[TIM_DMA_ID_CC1]->XferHalfCpltCallback = TIM_DMACaptureHalfCplt; - - /* Set the DMA error callback */ - htim->hdma[TIM_DMA_ID_CC1]->XferErrorCallback = TIM_DMAError ; - - /* Enable the DMA stream */ - if (HAL_DMA_Start_IT(htim->hdma[TIM_DMA_ID_CC1], (uint32_t)&htim->Instance->CCR1, (uint32_t)pData1, Length) != HAL_OK) - { - return HAL_ERROR; - } - /* Enable the TIM Input Capture DMA request */ - __HAL_TIM_ENABLE_DMA(htim, TIM_DMA_CC1); - - /* Enable the Peripheral */ - __HAL_TIM_ENABLE(htim); - - /* Enable the Capture compare channel */ - TIM_CCxChannelCmd(htim->Instance, TIM_CHANNEL_1, TIM_CCx_ENABLE); - break; - } - - case TIM_CHANNEL_2: - { - /* Set the DMA capture callbacks */ - htim->hdma[TIM_DMA_ID_CC2]->XferCpltCallback = TIM_DMACaptureCplt; - htim->hdma[TIM_DMA_ID_CC2]->XferHalfCpltCallback = TIM_DMACaptureHalfCplt; - - /* Set the DMA error callback */ - htim->hdma[TIM_DMA_ID_CC2]->XferErrorCallback = TIM_DMAError; - /* Enable the DMA stream */ - if (HAL_DMA_Start_IT(htim->hdma[TIM_DMA_ID_CC2], (uint32_t)&htim->Instance->CCR2, (uint32_t)pData2, Length) != HAL_OK) - { - return HAL_ERROR; - } - /* Enable the TIM Input Capture DMA request */ - __HAL_TIM_ENABLE_DMA(htim, TIM_DMA_CC2); - - /* Enable the Peripheral */ - __HAL_TIM_ENABLE(htim); - - /* Enable the Capture compare channel */ - TIM_CCxChannelCmd(htim->Instance, TIM_CHANNEL_2, TIM_CCx_ENABLE); - break; - } - - case TIM_CHANNEL_ALL: - { - /* Set the DMA capture callbacks */ - htim->hdma[TIM_DMA_ID_CC1]->XferCpltCallback = TIM_DMACaptureCplt; - htim->hdma[TIM_DMA_ID_CC1]->XferHalfCpltCallback = TIM_DMACaptureHalfCplt; - - /* Set the DMA error callback */ - htim->hdma[TIM_DMA_ID_CC1]->XferErrorCallback = TIM_DMAError ; - - /* Enable the DMA stream */ - if (HAL_DMA_Start_IT(htim->hdma[TIM_DMA_ID_CC1], (uint32_t)&htim->Instance->CCR1, (uint32_t)pData1, Length) != HAL_OK) - { - return HAL_ERROR; - } - - /* Set the DMA capture callbacks */ - htim->hdma[TIM_DMA_ID_CC2]->XferCpltCallback = TIM_DMACaptureCplt; - htim->hdma[TIM_DMA_ID_CC2]->XferHalfCpltCallback = TIM_DMACaptureHalfCplt; - - /* Set the DMA error callback */ - htim->hdma[TIM_DMA_ID_CC2]->XferErrorCallback = TIM_DMAError ; - - /* Enable the DMA stream */ - if (HAL_DMA_Start_IT(htim->hdma[TIM_DMA_ID_CC2], (uint32_t)&htim->Instance->CCR2, (uint32_t)pData2, Length) != HAL_OK) - { - return HAL_ERROR; - } - /* Enable the Peripheral */ - __HAL_TIM_ENABLE(htim); - - /* Enable the Capture compare channel */ - TIM_CCxChannelCmd(htim->Instance, TIM_CHANNEL_1, TIM_CCx_ENABLE); - TIM_CCxChannelCmd(htim->Instance, TIM_CHANNEL_2, TIM_CCx_ENABLE); - - /* Enable the TIM Input Capture DMA request */ - __HAL_TIM_ENABLE_DMA(htim, TIM_DMA_CC1); - /* Enable the TIM Input Capture DMA request */ - __HAL_TIM_ENABLE_DMA(htim, TIM_DMA_CC2); - break; - } - - default: - break; - } - /* Return function status */ - return HAL_OK; -} - -/** - * @brief Stops the TIM Encoder Interface in DMA mode. - * @param htim TIM Encoder Interface handle - * @param Channel TIM Channels to be enabled - * This parameter can be one of the following values: - * @arg TIM_CHANNEL_1: TIM Channel 1 selected - * @arg TIM_CHANNEL_2: TIM Channel 2 selected - * @arg TIM_CHANNEL_ALL: TIM Channel 1 and TIM Channel 2 are selected - * @retval HAL status - */ -HAL_StatusTypeDef HAL_TIM_Encoder_Stop_DMA(TIM_HandleTypeDef *htim, uint32_t Channel) -{ - /* Check the parameters */ - assert_param(IS_TIM_DMA_CC_INSTANCE(htim->Instance)); - - /* Disable the Input Capture channels 1 and 2 - (in the EncoderInterface the two possible channels that can be used are TIM_CHANNEL_1 and TIM_CHANNEL_2) */ - if (Channel == TIM_CHANNEL_1) - { - TIM_CCxChannelCmd(htim->Instance, TIM_CHANNEL_1, TIM_CCx_DISABLE); - - /* Disable the capture compare DMA Request 1 */ - __HAL_TIM_DISABLE_DMA(htim, TIM_DMA_CC1); - (void)HAL_DMA_Abort_IT(htim->hdma[TIM_DMA_ID_CC1]); - } - else if (Channel == TIM_CHANNEL_2) - { - TIM_CCxChannelCmd(htim->Instance, TIM_CHANNEL_2, TIM_CCx_DISABLE); - - /* Disable the capture compare DMA Request 2 */ - __HAL_TIM_DISABLE_DMA(htim, TIM_DMA_CC2); - (void)HAL_DMA_Abort_IT(htim->hdma[TIM_DMA_ID_CC2]); - } - else - { - TIM_CCxChannelCmd(htim->Instance, TIM_CHANNEL_1, TIM_CCx_DISABLE); - TIM_CCxChannelCmd(htim->Instance, TIM_CHANNEL_2, TIM_CCx_DISABLE); - - /* Disable the capture compare DMA Request 1 and 2 */ - __HAL_TIM_DISABLE_DMA(htim, TIM_DMA_CC1); - __HAL_TIM_DISABLE_DMA(htim, TIM_DMA_CC2); - (void)HAL_DMA_Abort_IT(htim->hdma[TIM_DMA_ID_CC1]); - (void)HAL_DMA_Abort_IT(htim->hdma[TIM_DMA_ID_CC2]); - } - - /* Disable the Peripheral */ - __HAL_TIM_DISABLE(htim); - - /* Change the htim state */ - htim->State = HAL_TIM_STATE_READY; - - /* Return function status */ - return HAL_OK; -} - -/** - * @} - */ -/** @defgroup TIM_Exported_Functions_Group7 TIM IRQ handler management - * @brief TIM IRQ handler management - * -@verbatim - ============================================================================== - ##### IRQ handler management ##### - ============================================================================== - [..] - This section provides Timer IRQ handler function. - -@endverbatim - * @{ - */ -/** - * @brief This function handles TIM interrupts requests. - * @param htim TIM handle - * @retval None - */ -void HAL_TIM_IRQHandler(TIM_HandleTypeDef *htim) -{ - /* Capture compare 1 event */ - if (__HAL_TIM_GET_FLAG(htim, TIM_FLAG_CC1) != RESET) - { - if (__HAL_TIM_GET_IT_SOURCE(htim, TIM_IT_CC1) != RESET) - { - { - __HAL_TIM_CLEAR_IT(htim, TIM_IT_CC1); - htim->Channel = HAL_TIM_ACTIVE_CHANNEL_1; - - /* Input capture event */ - if ((htim->Instance->CCMR1 & TIM_CCMR1_CC1S) != 0x00U) - { -#if (USE_HAL_TIM_REGISTER_CALLBACKS == 1) - htim->IC_CaptureCallback(htim); -#else - HAL_TIM_IC_CaptureCallback(htim); -#endif /* USE_HAL_TIM_REGISTER_CALLBACKS */ - } - /* Output compare event */ - else - { -#if (USE_HAL_TIM_REGISTER_CALLBACKS == 1) - htim->OC_DelayElapsedCallback(htim); - htim->PWM_PulseFinishedCallback(htim); -#else - HAL_TIM_OC_DelayElapsedCallback(htim); - HAL_TIM_PWM_PulseFinishedCallback(htim); -#endif /* USE_HAL_TIM_REGISTER_CALLBACKS */ - } - htim->Channel = HAL_TIM_ACTIVE_CHANNEL_CLEARED; - } - } - } - /* Capture compare 2 event */ - if (__HAL_TIM_GET_FLAG(htim, TIM_FLAG_CC2) != RESET) - { - if (__HAL_TIM_GET_IT_SOURCE(htim, TIM_IT_CC2) != RESET) - { - __HAL_TIM_CLEAR_IT(htim, TIM_IT_CC2); - htim->Channel = HAL_TIM_ACTIVE_CHANNEL_2; - /* Input capture event */ - if ((htim->Instance->CCMR1 & TIM_CCMR1_CC2S) != 0x00U) - { -#if (USE_HAL_TIM_REGISTER_CALLBACKS == 1) - htim->IC_CaptureCallback(htim); -#else - HAL_TIM_IC_CaptureCallback(htim); -#endif /* USE_HAL_TIM_REGISTER_CALLBACKS */ - } - /* Output compare event */ - else - { -#if (USE_HAL_TIM_REGISTER_CALLBACKS == 1) - htim->OC_DelayElapsedCallback(htim); - htim->PWM_PulseFinishedCallback(htim); -#else - HAL_TIM_OC_DelayElapsedCallback(htim); - HAL_TIM_PWM_PulseFinishedCallback(htim); -#endif /* USE_HAL_TIM_REGISTER_CALLBACKS */ - } - htim->Channel = HAL_TIM_ACTIVE_CHANNEL_CLEARED; - } - } - /* Capture compare 3 event */ - if (__HAL_TIM_GET_FLAG(htim, TIM_FLAG_CC3) != RESET) - { - if (__HAL_TIM_GET_IT_SOURCE(htim, TIM_IT_CC3) != RESET) - { - __HAL_TIM_CLEAR_IT(htim, TIM_IT_CC3); - htim->Channel = HAL_TIM_ACTIVE_CHANNEL_3; - /* Input capture event */ - if ((htim->Instance->CCMR2 & TIM_CCMR2_CC3S) != 0x00U) - { -#if (USE_HAL_TIM_REGISTER_CALLBACKS == 1) - htim->IC_CaptureCallback(htim); -#else - HAL_TIM_IC_CaptureCallback(htim); -#endif /* USE_HAL_TIM_REGISTER_CALLBACKS */ - } - /* Output compare event */ - else - { -#if (USE_HAL_TIM_REGISTER_CALLBACKS == 1) - htim->OC_DelayElapsedCallback(htim); - htim->PWM_PulseFinishedCallback(htim); -#else - HAL_TIM_OC_DelayElapsedCallback(htim); - HAL_TIM_PWM_PulseFinishedCallback(htim); -#endif /* USE_HAL_TIM_REGISTER_CALLBACKS */ - } - htim->Channel = HAL_TIM_ACTIVE_CHANNEL_CLEARED; - } - } - /* Capture compare 4 event */ - if (__HAL_TIM_GET_FLAG(htim, TIM_FLAG_CC4) != RESET) - { - if (__HAL_TIM_GET_IT_SOURCE(htim, TIM_IT_CC4) != RESET) - { - __HAL_TIM_CLEAR_IT(htim, TIM_IT_CC4); - htim->Channel = HAL_TIM_ACTIVE_CHANNEL_4; - /* Input capture event */ - if ((htim->Instance->CCMR2 & TIM_CCMR2_CC4S) != 0x00U) - { -#if (USE_HAL_TIM_REGISTER_CALLBACKS == 1) - htim->IC_CaptureCallback(htim); -#else - HAL_TIM_IC_CaptureCallback(htim); -#endif /* USE_HAL_TIM_REGISTER_CALLBACKS */ - } - /* Output compare event */ - else - { -#if (USE_HAL_TIM_REGISTER_CALLBACKS == 1) - htim->OC_DelayElapsedCallback(htim); - htim->PWM_PulseFinishedCallback(htim); -#else - HAL_TIM_OC_DelayElapsedCallback(htim); - HAL_TIM_PWM_PulseFinishedCallback(htim); -#endif /* USE_HAL_TIM_REGISTER_CALLBACKS */ - } - htim->Channel = HAL_TIM_ACTIVE_CHANNEL_CLEARED; - } - } - /* TIM Update event */ - if (__HAL_TIM_GET_FLAG(htim, TIM_FLAG_UPDATE) != RESET) - { - if (__HAL_TIM_GET_IT_SOURCE(htim, TIM_IT_UPDATE) != RESET) - { - __HAL_TIM_CLEAR_IT(htim, TIM_IT_UPDATE); -#if (USE_HAL_TIM_REGISTER_CALLBACKS == 1) - htim->PeriodElapsedCallback(htim); -#else - HAL_TIM_PeriodElapsedCallback(htim); -#endif /* USE_HAL_TIM_REGISTER_CALLBACKS */ - } - } - /* TIM Break input event */ - if (__HAL_TIM_GET_FLAG(htim, TIM_FLAG_BREAK) != RESET) - { - if (__HAL_TIM_GET_IT_SOURCE(htim, TIM_IT_BREAK) != RESET) - { - __HAL_TIM_CLEAR_IT(htim, TIM_IT_BREAK); -#if (USE_HAL_TIM_REGISTER_CALLBACKS == 1) - htim->BreakCallback(htim); -#else - HAL_TIMEx_BreakCallback(htim); -#endif /* USE_HAL_TIM_REGISTER_CALLBACKS */ - } - } - /* TIM Break2 input event */ - if (__HAL_TIM_GET_FLAG(htim, TIM_FLAG_BREAK2) != RESET) - { - if (__HAL_TIM_GET_IT_SOURCE(htim, TIM_IT_BREAK) != RESET) - { - __HAL_TIM_CLEAR_FLAG(htim, TIM_FLAG_BREAK2); -#if (USE_HAL_TIM_REGISTER_CALLBACKS == 1) - htim->Break2Callback(htim); -#else - HAL_TIMEx_Break2Callback(htim); -#endif /* USE_HAL_TIM_REGISTER_CALLBACKS */ - } - } - /* TIM Trigger detection event */ - if (__HAL_TIM_GET_FLAG(htim, TIM_FLAG_TRIGGER) != RESET) - { - if (__HAL_TIM_GET_IT_SOURCE(htim, TIM_IT_TRIGGER) != RESET) - { - __HAL_TIM_CLEAR_IT(htim, TIM_IT_TRIGGER); -#if (USE_HAL_TIM_REGISTER_CALLBACKS == 1) - htim->TriggerCallback(htim); -#else - HAL_TIM_TriggerCallback(htim); -#endif /* USE_HAL_TIM_REGISTER_CALLBACKS */ - } - } - /* TIM commutation event */ - if (__HAL_TIM_GET_FLAG(htim, TIM_FLAG_COM) != RESET) - { - if (__HAL_TIM_GET_IT_SOURCE(htim, TIM_IT_COM) != RESET) - { - __HAL_TIM_CLEAR_IT(htim, TIM_FLAG_COM); -#if (USE_HAL_TIM_REGISTER_CALLBACKS == 1) - htim->CommutationCallback(htim); -#else - HAL_TIMEx_CommutCallback(htim); -#endif /* USE_HAL_TIM_REGISTER_CALLBACKS */ - } - } -} - -/** - * @} - */ - -/** @defgroup TIM_Exported_Functions_Group8 TIM Peripheral Control functions - * @brief TIM Peripheral Control functions - * -@verbatim - ============================================================================== - ##### Peripheral Control functions ##### - ============================================================================== - [..] - This section provides functions allowing to: - (+) Configure The Input Output channels for OC, PWM, IC or One Pulse mode. - (+) Configure External Clock source. - (+) Configure Complementary channels, break features and dead time. - (+) Configure Master and the Slave synchronization. - (+) Configure the DMA Burst Mode. - -@endverbatim - * @{ - */ - -/** - * @brief Initializes the TIM Output Compare Channels according to the specified - * parameters in the TIM_OC_InitTypeDef. - * @param htim TIM Output Compare handle - * @param sConfig TIM Output Compare configuration structure - * @param Channel TIM Channels to configure - * This parameter can be one of the following values: - * @arg TIM_CHANNEL_1: TIM Channel 1 selected - * @arg TIM_CHANNEL_2: TIM Channel 2 selected - * @arg TIM_CHANNEL_3: TIM Channel 3 selected - * @arg TIM_CHANNEL_4: TIM Channel 4 selected - * @arg TIM_CHANNEL_5: TIM Channel 5 selected - * @arg TIM_CHANNEL_6: TIM Channel 6 selected - * @retval HAL status - */ -HAL_StatusTypeDef HAL_TIM_OC_ConfigChannel(TIM_HandleTypeDef *htim, - TIM_OC_InitTypeDef *sConfig, - uint32_t Channel) -{ - /* Check the parameters */ - assert_param(IS_TIM_CHANNELS(Channel)); - assert_param(IS_TIM_OC_MODE(sConfig->OCMode)); - assert_param(IS_TIM_OC_POLARITY(sConfig->OCPolarity)); - - /* Process Locked */ - __HAL_LOCK(htim); - - htim->State = HAL_TIM_STATE_BUSY; - - switch (Channel) - { - case TIM_CHANNEL_1: - { - /* Check the parameters */ - assert_param(IS_TIM_CC1_INSTANCE(htim->Instance)); - - /* Configure the TIM Channel 1 in Output Compare */ - TIM_OC1_SetConfig(htim->Instance, sConfig); - break; - } - - case TIM_CHANNEL_2: - { - /* Check the parameters */ - assert_param(IS_TIM_CC2_INSTANCE(htim->Instance)); - - /* Configure the TIM Channel 2 in Output Compare */ - TIM_OC2_SetConfig(htim->Instance, sConfig); - break; - } - - case TIM_CHANNEL_3: - { - /* Check the parameters */ - assert_param(IS_TIM_CC3_INSTANCE(htim->Instance)); - - /* Configure the TIM Channel 3 in Output Compare */ - TIM_OC3_SetConfig(htim->Instance, sConfig); - break; - } - - case TIM_CHANNEL_4: - { - /* Check the parameters */ - assert_param(IS_TIM_CC4_INSTANCE(htim->Instance)); - - /* Configure the TIM Channel 4 in Output Compare */ - TIM_OC4_SetConfig(htim->Instance, sConfig); - break; - } - - case TIM_CHANNEL_5: - { - /* Check the parameters */ - assert_param(IS_TIM_CC5_INSTANCE(htim->Instance)); - - /* Configure the TIM Channel 5 in Output Compare */ - TIM_OC5_SetConfig(htim->Instance, sConfig); - break; - } - - case TIM_CHANNEL_6: - { - /* Check the parameters */ - assert_param(IS_TIM_CC6_INSTANCE(htim->Instance)); - - /* Configure the TIM Channel 6 in Output Compare */ - TIM_OC6_SetConfig(htim->Instance, sConfig); - break; - } - - default: - break; - } - - htim->State = HAL_TIM_STATE_READY; - - __HAL_UNLOCK(htim); - - return HAL_OK; -} - -/** - * @brief Initializes the TIM Input Capture Channels according to the specified - * parameters in the TIM_IC_InitTypeDef. - * @param htim TIM IC handle - * @param sConfig TIM Input Capture configuration structure - * @param Channel TIM Channel to configure - * This parameter can be one of the following values: - * @arg TIM_CHANNEL_1: TIM Channel 1 selected - * @arg TIM_CHANNEL_2: TIM Channel 2 selected - * @arg TIM_CHANNEL_3: TIM Channel 3 selected - * @arg TIM_CHANNEL_4: TIM Channel 4 selected - * @retval HAL status - */ -HAL_StatusTypeDef HAL_TIM_IC_ConfigChannel(TIM_HandleTypeDef *htim, TIM_IC_InitTypeDef *sConfig, uint32_t Channel) -{ - /* Check the parameters */ - assert_param(IS_TIM_CC1_INSTANCE(htim->Instance)); - assert_param(IS_TIM_IC_POLARITY(sConfig->ICPolarity)); - assert_param(IS_TIM_IC_SELECTION(sConfig->ICSelection)); - assert_param(IS_TIM_IC_PRESCALER(sConfig->ICPrescaler)); - assert_param(IS_TIM_IC_FILTER(sConfig->ICFilter)); - - /* Process Locked */ - __HAL_LOCK(htim); - - htim->State = HAL_TIM_STATE_BUSY; - - if (Channel == TIM_CHANNEL_1) - { - /* TI1 Configuration */ - TIM_TI1_SetConfig(htim->Instance, - sConfig->ICPolarity, - sConfig->ICSelection, - sConfig->ICFilter); - - /* Reset the IC1PSC Bits */ - htim->Instance->CCMR1 &= ~TIM_CCMR1_IC1PSC; - - /* Set the IC1PSC value */ - htim->Instance->CCMR1 |= sConfig->ICPrescaler; - } - else if (Channel == TIM_CHANNEL_2) - { - /* TI2 Configuration */ - assert_param(IS_TIM_CC2_INSTANCE(htim->Instance)); - - TIM_TI2_SetConfig(htim->Instance, - sConfig->ICPolarity, - sConfig->ICSelection, - sConfig->ICFilter); - - /* Reset the IC2PSC Bits */ - htim->Instance->CCMR1 &= ~TIM_CCMR1_IC2PSC; - - /* Set the IC2PSC value */ - htim->Instance->CCMR1 |= (sConfig->ICPrescaler << 8U); - } - else if (Channel == TIM_CHANNEL_3) - { - /* TI3 Configuration */ - assert_param(IS_TIM_CC3_INSTANCE(htim->Instance)); - - TIM_TI3_SetConfig(htim->Instance, - sConfig->ICPolarity, - sConfig->ICSelection, - sConfig->ICFilter); - - /* Reset the IC3PSC Bits */ - htim->Instance->CCMR2 &= ~TIM_CCMR2_IC3PSC; - - /* Set the IC3PSC value */ - htim->Instance->CCMR2 |= sConfig->ICPrescaler; - } - else - { - /* TI4 Configuration */ - assert_param(IS_TIM_CC4_INSTANCE(htim->Instance)); - - TIM_TI4_SetConfig(htim->Instance, - sConfig->ICPolarity, - sConfig->ICSelection, - sConfig->ICFilter); - - /* Reset the IC4PSC Bits */ - htim->Instance->CCMR2 &= ~TIM_CCMR2_IC4PSC; - - /* Set the IC4PSC value */ - htim->Instance->CCMR2 |= (sConfig->ICPrescaler << 8U); - } - - htim->State = HAL_TIM_STATE_READY; - - __HAL_UNLOCK(htim); - - return HAL_OK; -} - -/** - * @brief Initializes the TIM PWM channels according to the specified - * parameters in the TIM_OC_InitTypeDef. - * @param htim TIM PWM handle - * @param sConfig TIM PWM configuration structure - * @param Channel TIM Channels to be configured - * This parameter can be one of the following values: - * @arg TIM_CHANNEL_1: TIM Channel 1 selected - * @arg TIM_CHANNEL_2: TIM Channel 2 selected - * @arg TIM_CHANNEL_3: TIM Channel 3 selected - * @arg TIM_CHANNEL_4: TIM Channel 4 selected - * @arg TIM_CHANNEL_5: TIM Channel 5 selected - * @arg TIM_CHANNEL_6: TIM Channel 6 selected - * @retval HAL status - */ -HAL_StatusTypeDef HAL_TIM_PWM_ConfigChannel(TIM_HandleTypeDef *htim, - TIM_OC_InitTypeDef *sConfig, - uint32_t Channel) -{ - /* Check the parameters */ - assert_param(IS_TIM_CHANNELS(Channel)); - assert_param(IS_TIM_PWM_MODE(sConfig->OCMode)); - assert_param(IS_TIM_OC_POLARITY(sConfig->OCPolarity)); - assert_param(IS_TIM_FAST_STATE(sConfig->OCFastMode)); - - /* Process Locked */ - __HAL_LOCK(htim); - - htim->State = HAL_TIM_STATE_BUSY; - - switch (Channel) - { - case TIM_CHANNEL_1: - { - /* Check the parameters */ - assert_param(IS_TIM_CC1_INSTANCE(htim->Instance)); - - /* Configure the Channel 1 in PWM mode */ - TIM_OC1_SetConfig(htim->Instance, sConfig); - - /* Set the Preload enable bit for channel1 */ - htim->Instance->CCMR1 |= TIM_CCMR1_OC1PE; - - /* Configure the Output Fast mode */ - htim->Instance->CCMR1 &= ~TIM_CCMR1_OC1FE; - htim->Instance->CCMR1 |= sConfig->OCFastMode; - break; - } - - case TIM_CHANNEL_2: - { - /* Check the parameters */ - assert_param(IS_TIM_CC2_INSTANCE(htim->Instance)); - - /* Configure the Channel 2 in PWM mode */ - TIM_OC2_SetConfig(htim->Instance, sConfig); - - /* Set the Preload enable bit for channel2 */ - htim->Instance->CCMR1 |= TIM_CCMR1_OC2PE; - - /* Configure the Output Fast mode */ - htim->Instance->CCMR1 &= ~TIM_CCMR1_OC2FE; - htim->Instance->CCMR1 |= sConfig->OCFastMode << 8U; - break; - } - - case TIM_CHANNEL_3: - { - /* Check the parameters */ - assert_param(IS_TIM_CC3_INSTANCE(htim->Instance)); - - /* Configure the Channel 3 in PWM mode */ - TIM_OC3_SetConfig(htim->Instance, sConfig); - - /* Set the Preload enable bit for channel3 */ - htim->Instance->CCMR2 |= TIM_CCMR2_OC3PE; - - /* Configure the Output Fast mode */ - htim->Instance->CCMR2 &= ~TIM_CCMR2_OC3FE; - htim->Instance->CCMR2 |= sConfig->OCFastMode; - break; - } - - case TIM_CHANNEL_4: - { - /* Check the parameters */ - assert_param(IS_TIM_CC4_INSTANCE(htim->Instance)); - - /* Configure the Channel 4 in PWM mode */ - TIM_OC4_SetConfig(htim->Instance, sConfig); - - /* Set the Preload enable bit for channel4 */ - htim->Instance->CCMR2 |= TIM_CCMR2_OC4PE; - - /* Configure the Output Fast mode */ - htim->Instance->CCMR2 &= ~TIM_CCMR2_OC4FE; - htim->Instance->CCMR2 |= sConfig->OCFastMode << 8U; - break; - } - - case TIM_CHANNEL_5: - { - /* Check the parameters */ - assert_param(IS_TIM_CC5_INSTANCE(htim->Instance)); - - /* Configure the Channel 5 in PWM mode */ - TIM_OC5_SetConfig(htim->Instance, sConfig); - - /* Set the Preload enable bit for channel5*/ - htim->Instance->CCMR3 |= TIM_CCMR3_OC5PE; - - /* Configure the Output Fast mode */ - htim->Instance->CCMR3 &= ~TIM_CCMR3_OC5FE; - htim->Instance->CCMR3 |= sConfig->OCFastMode; - break; - } - - case TIM_CHANNEL_6: - { - /* Check the parameters */ - assert_param(IS_TIM_CC6_INSTANCE(htim->Instance)); - - /* Configure the Channel 6 in PWM mode */ - TIM_OC6_SetConfig(htim->Instance, sConfig); - - /* Set the Preload enable bit for channel6 */ - htim->Instance->CCMR3 |= TIM_CCMR3_OC6PE; - - /* Configure the Output Fast mode */ - htim->Instance->CCMR3 &= ~TIM_CCMR3_OC6FE; - htim->Instance->CCMR3 |= sConfig->OCFastMode << 8U; - break; - } - - default: - break; - } - - htim->State = HAL_TIM_STATE_READY; - - __HAL_UNLOCK(htim); - - return HAL_OK; -} - -/** - * @brief Initializes the TIM One Pulse Channels according to the specified - * parameters in the TIM_OnePulse_InitTypeDef. - * @param htim TIM One Pulse handle - * @param sConfig TIM One Pulse configuration structure - * @param OutputChannel TIM output channel to configure - * This parameter can be one of the following values: - * @arg TIM_CHANNEL_1: TIM Channel 1 selected - * @arg TIM_CHANNEL_2: TIM Channel 2 selected - * @param InputChannel TIM input Channel to configure - * This parameter can be one of the following values: - * @arg TIM_CHANNEL_1: TIM Channel 1 selected - * @arg TIM_CHANNEL_2: TIM Channel 2 selected - * @retval HAL status - */ -HAL_StatusTypeDef HAL_TIM_OnePulse_ConfigChannel(TIM_HandleTypeDef *htim, TIM_OnePulse_InitTypeDef *sConfig, uint32_t OutputChannel, uint32_t InputChannel) -{ - TIM_OC_InitTypeDef temp1; - - /* Check the parameters */ - assert_param(IS_TIM_OPM_CHANNELS(OutputChannel)); - assert_param(IS_TIM_OPM_CHANNELS(InputChannel)); - - if (OutputChannel != InputChannel) - { - /* Process Locked */ - __HAL_LOCK(htim); - - htim->State = HAL_TIM_STATE_BUSY; - - /* Extract the Output compare configuration from sConfig structure */ - temp1.OCMode = sConfig->OCMode; - temp1.Pulse = sConfig->Pulse; - temp1.OCPolarity = sConfig->OCPolarity; - temp1.OCNPolarity = sConfig->OCNPolarity; - temp1.OCIdleState = sConfig->OCIdleState; - temp1.OCNIdleState = sConfig->OCNIdleState; - - switch (OutputChannel) - { - case TIM_CHANNEL_1: - { - assert_param(IS_TIM_CC1_INSTANCE(htim->Instance)); - - TIM_OC1_SetConfig(htim->Instance, &temp1); - break; - } - case TIM_CHANNEL_2: - { - assert_param(IS_TIM_CC2_INSTANCE(htim->Instance)); - - TIM_OC2_SetConfig(htim->Instance, &temp1); - break; - } - default: - break; - } - - switch (InputChannel) - { - case TIM_CHANNEL_1: - { - assert_param(IS_TIM_CC1_INSTANCE(htim->Instance)); - - TIM_TI1_SetConfig(htim->Instance, sConfig->ICPolarity, - sConfig->ICSelection, sConfig->ICFilter); - - /* Reset the IC1PSC Bits */ - htim->Instance->CCMR1 &= ~TIM_CCMR1_IC1PSC; - - /* Select the Trigger source */ - htim->Instance->SMCR &= ~TIM_SMCR_TS; - htim->Instance->SMCR |= TIM_TS_TI1FP1; - - /* Select the Slave Mode */ - htim->Instance->SMCR &= ~TIM_SMCR_SMS; - htim->Instance->SMCR |= TIM_SLAVEMODE_TRIGGER; - break; - } - case TIM_CHANNEL_2: - { - assert_param(IS_TIM_CC2_INSTANCE(htim->Instance)); - - TIM_TI2_SetConfig(htim->Instance, sConfig->ICPolarity, - sConfig->ICSelection, sConfig->ICFilter); - - /* Reset the IC2PSC Bits */ - htim->Instance->CCMR1 &= ~TIM_CCMR1_IC2PSC; - - /* Select the Trigger source */ - htim->Instance->SMCR &= ~TIM_SMCR_TS; - htim->Instance->SMCR |= TIM_TS_TI2FP2; - - /* Select the Slave Mode */ - htim->Instance->SMCR &= ~TIM_SMCR_SMS; - htim->Instance->SMCR |= TIM_SLAVEMODE_TRIGGER; - break; - } - - default: - break; - } - - htim->State = HAL_TIM_STATE_READY; - - __HAL_UNLOCK(htim); - - return HAL_OK; - } - else - { - return HAL_ERROR; - } -} - -/** - * @brief Configure the DMA Burst to transfer Data from the memory to the TIM peripheral - * @param htim TIM handle - * @param BurstBaseAddress TIM Base address from where the DMA will start the Data write - * This parameter can be one of the following values: - * @arg TIM_DMABASE_CR1 - * @arg TIM_DMABASE_CR2 - * @arg TIM_DMABASE_SMCR - * @arg TIM_DMABASE_DIER - * @arg TIM_DMABASE_SR - * @arg TIM_DMABASE_EGR - * @arg TIM_DMABASE_CCMR1 - * @arg TIM_DMABASE_CCMR2 - * @arg TIM_DMABASE_CCER - * @arg TIM_DMABASE_CNT - * @arg TIM_DMABASE_PSC - * @arg TIM_DMABASE_ARR - * @arg TIM_DMABASE_RCR - * @arg TIM_DMABASE_CCR1 - * @arg TIM_DMABASE_CCR2 - * @arg TIM_DMABASE_CCR3 - * @arg TIM_DMABASE_CCR4 - * @arg TIM_DMABASE_BDTR - * @arg TIM_DMABASE_OR - * @arg TIM_DMABASE_CCMR3 - * @arg TIM_DMABASE_CCR5 - * @arg TIM_DMABASE_CCR6 - * @arg TIM_DMABASE_AF1 (*) - * @arg TIM_DMABASE_AF2 (*) - * (*) value not defined in all devices - * @param BurstRequestSrc TIM DMA Request sources - * This parameter can be one of the following values: - * @arg TIM_DMA_UPDATE: TIM update Interrupt source - * @arg TIM_DMA_CC1: TIM Capture Compare 1 DMA source - * @arg TIM_DMA_CC2: TIM Capture Compare 2 DMA source - * @arg TIM_DMA_CC3: TIM Capture Compare 3 DMA source - * @arg TIM_DMA_CC4: TIM Capture Compare 4 DMA source - * @arg TIM_DMA_COM: TIM Commutation DMA source - * @arg TIM_DMA_TRIGGER: TIM Trigger DMA source - * @param BurstBuffer The Buffer address. - * @param BurstLength DMA Burst length. This parameter can be one value - * between: TIM_DMABURSTLENGTH_1TRANSFER and TIM_DMABURSTLENGTH_18TRANSFERS. - * @note This function should be used only when BurstLength is equal to DMA data transfer length. - * @retval HAL status - */ -HAL_StatusTypeDef HAL_TIM_DMABurst_WriteStart(TIM_HandleTypeDef *htim, uint32_t BurstBaseAddress, uint32_t BurstRequestSrc, - uint32_t *BurstBuffer, uint32_t BurstLength) -{ - /* Check the parameters */ - assert_param(IS_TIM_DMABURST_INSTANCE(htim->Instance)); - assert_param(IS_TIM_DMA_BASE(BurstBaseAddress)); - assert_param(IS_TIM_DMA_SOURCE(BurstRequestSrc)); - assert_param(IS_TIM_DMA_LENGTH(BurstLength)); - - if ((htim->State == HAL_TIM_STATE_BUSY)) - { - return HAL_BUSY; - } - else if ((htim->State == HAL_TIM_STATE_READY)) - { - if ((BurstBuffer == NULL) && (BurstLength > 0U)) - { - return HAL_ERROR; - } - else - { - htim->State = HAL_TIM_STATE_BUSY; - } - } - else - { - /* nothing to do */ - } - switch (BurstRequestSrc) - { - case TIM_DMA_UPDATE: - { - /* Set the DMA Period elapsed callbacks */ - htim->hdma[TIM_DMA_ID_UPDATE]->XferCpltCallback = TIM_DMAPeriodElapsedCplt; - htim->hdma[TIM_DMA_ID_UPDATE]->XferHalfCpltCallback = TIM_DMAPeriodElapsedHalfCplt; - - /* Set the DMA error callback */ - htim->hdma[TIM_DMA_ID_UPDATE]->XferErrorCallback = TIM_DMAError ; - - /* Enable the DMA stream */ - if (HAL_DMA_Start_IT(htim->hdma[TIM_DMA_ID_UPDATE], (uint32_t)BurstBuffer, (uint32_t)&htim->Instance->DMAR, ((BurstLength) >> 8U) + 1U) != HAL_OK) - { - return HAL_ERROR; - } - break; - } - case TIM_DMA_CC1: - { - /* Set the DMA compare callbacks */ - htim->hdma[TIM_DMA_ID_CC1]->XferCpltCallback = TIM_DMADelayPulseCplt; - htim->hdma[TIM_DMA_ID_CC1]->XferHalfCpltCallback = TIM_DMADelayPulseHalfCplt; - - /* Set the DMA error callback */ - htim->hdma[TIM_DMA_ID_CC1]->XferErrorCallback = TIM_DMAError ; - - /* Enable the DMA stream */ - if (HAL_DMA_Start_IT(htim->hdma[TIM_DMA_ID_CC1], (uint32_t)BurstBuffer, (uint32_t)&htim->Instance->DMAR, ((BurstLength) >> 8U) + 1U) != HAL_OK) - { - return HAL_ERROR; - } - break; - } - case TIM_DMA_CC2: - { - /* Set the DMA compare callbacks */ - htim->hdma[TIM_DMA_ID_CC2]->XferCpltCallback = TIM_DMADelayPulseCplt; - htim->hdma[TIM_DMA_ID_CC2]->XferHalfCpltCallback = TIM_DMADelayPulseHalfCplt; - - /* Set the DMA error callback */ - htim->hdma[TIM_DMA_ID_CC2]->XferErrorCallback = TIM_DMAError ; - - /* Enable the DMA stream */ - if (HAL_DMA_Start_IT(htim->hdma[TIM_DMA_ID_CC2], (uint32_t)BurstBuffer, (uint32_t)&htim->Instance->DMAR, ((BurstLength) >> 8U) + 1U) != HAL_OK) - { - return HAL_ERROR; - } - break; - } - case TIM_DMA_CC3: - { - /* Set the DMA compare callbacks */ - htim->hdma[TIM_DMA_ID_CC3]->XferCpltCallback = TIM_DMADelayPulseCplt; - htim->hdma[TIM_DMA_ID_CC3]->XferHalfCpltCallback = TIM_DMADelayPulseHalfCplt; - - /* Set the DMA error callback */ - htim->hdma[TIM_DMA_ID_CC3]->XferErrorCallback = TIM_DMAError ; - - /* Enable the DMA stream */ - if (HAL_DMA_Start_IT(htim->hdma[TIM_DMA_ID_CC3], (uint32_t)BurstBuffer, (uint32_t)&htim->Instance->DMAR, ((BurstLength) >> 8U) + 1U) != HAL_OK) - { - return HAL_ERROR; - } - break; - } - case TIM_DMA_CC4: - { - /* Set the DMA compare callbacks */ - htim->hdma[TIM_DMA_ID_CC4]->XferCpltCallback = TIM_DMADelayPulseCplt; - htim->hdma[TIM_DMA_ID_CC4]->XferHalfCpltCallback = TIM_DMADelayPulseHalfCplt; - - /* Set the DMA error callback */ - htim->hdma[TIM_DMA_ID_CC4]->XferErrorCallback = TIM_DMAError ; - - /* Enable the DMA stream */ - if (HAL_DMA_Start_IT(htim->hdma[TIM_DMA_ID_CC4], (uint32_t)BurstBuffer, (uint32_t)&htim->Instance->DMAR, ((BurstLength) >> 8U) + 1U) != HAL_OK) - { - return HAL_ERROR; - } - break; - } - case TIM_DMA_COM: - { - /* Set the DMA commutation callbacks */ - htim->hdma[TIM_DMA_ID_COMMUTATION]->XferCpltCallback = TIMEx_DMACommutationCplt; - htim->hdma[TIM_DMA_ID_COMMUTATION]->XferHalfCpltCallback = TIMEx_DMACommutationHalfCplt; - - /* Set the DMA error callback */ - htim->hdma[TIM_DMA_ID_COMMUTATION]->XferErrorCallback = TIM_DMAError ; - - /* Enable the DMA stream */ - if (HAL_DMA_Start_IT(htim->hdma[TIM_DMA_ID_COMMUTATION], (uint32_t)BurstBuffer, (uint32_t)&htim->Instance->DMAR, ((BurstLength) >> 8U) + 1U) != HAL_OK) - { - return HAL_ERROR; - } - break; - } - case TIM_DMA_TRIGGER: - { - /* Set the DMA trigger callbacks */ - htim->hdma[TIM_DMA_ID_TRIGGER]->XferCpltCallback = TIM_DMATriggerCplt; - htim->hdma[TIM_DMA_ID_TRIGGER]->XferHalfCpltCallback = TIM_DMATriggerHalfCplt; - - /* Set the DMA error callback */ - htim->hdma[TIM_DMA_ID_TRIGGER]->XferErrorCallback = TIM_DMAError ; - - /* Enable the DMA stream */ - if (HAL_DMA_Start_IT(htim->hdma[TIM_DMA_ID_TRIGGER], (uint32_t)BurstBuffer, (uint32_t)&htim->Instance->DMAR, ((BurstLength) >> 8U) + 1U) != HAL_OK) - { - return HAL_ERROR; - } - break; - } - default: - break; - } - /* configure the DMA Burst Mode */ - htim->Instance->DCR = (BurstBaseAddress | BurstLength); - - /* Enable the TIM DMA Request */ - __HAL_TIM_ENABLE_DMA(htim, BurstRequestSrc); - - htim->State = HAL_TIM_STATE_READY; - - /* Return function status */ - return HAL_OK; -} - -/** - * @brief Stops the TIM DMA Burst mode - * @param htim TIM handle - * @param BurstRequestSrc TIM DMA Request sources to disable - * @retval HAL status - */ -HAL_StatusTypeDef HAL_TIM_DMABurst_WriteStop(TIM_HandleTypeDef *htim, uint32_t BurstRequestSrc) -{ - HAL_StatusTypeDef status = HAL_OK; - /* Check the parameters */ - assert_param(IS_TIM_DMA_SOURCE(BurstRequestSrc)); - - /* Abort the DMA transfer (at least disable the DMA stream) */ - switch (BurstRequestSrc) - { - case TIM_DMA_UPDATE: - { - status = HAL_DMA_Abort_IT(htim->hdma[TIM_DMA_ID_UPDATE]); - break; - } - case TIM_DMA_CC1: - { - status = HAL_DMA_Abort_IT(htim->hdma[TIM_DMA_ID_CC1]); - break; - } - case TIM_DMA_CC2: - { - status = HAL_DMA_Abort_IT(htim->hdma[TIM_DMA_ID_CC2]); - break; - } - case TIM_DMA_CC3: - { - status = HAL_DMA_Abort_IT(htim->hdma[TIM_DMA_ID_CC3]); - break; - } - case TIM_DMA_CC4: - { - status = HAL_DMA_Abort_IT(htim->hdma[TIM_DMA_ID_CC4]); - break; - } - case TIM_DMA_COM: - { - status = HAL_DMA_Abort_IT(htim->hdma[TIM_DMA_ID_COMMUTATION]); - break; - } - case TIM_DMA_TRIGGER: - { - status = HAL_DMA_Abort_IT(htim->hdma[TIM_DMA_ID_TRIGGER]); - break; - } - default: - break; - } - - if (HAL_OK == status) - { - /* Disable the TIM Update DMA request */ - __HAL_TIM_DISABLE_DMA(htim, BurstRequestSrc); - } - - /* Return function status */ - return status; -} - -/** - * @brief Configure the DMA Burst to transfer Data from the TIM peripheral to the memory - * @param htim TIM handle - * @param BurstBaseAddress TIM Base address from where the DMA will start the Data read - * This parameter can be one of the following values: - * @arg TIM_DMABASE_CR1 - * @arg TIM_DMABASE_CR2 - * @arg TIM_DMABASE_SMCR - * @arg TIM_DMABASE_DIER - * @arg TIM_DMABASE_SR - * @arg TIM_DMABASE_EGR - * @arg TIM_DMABASE_CCMR1 - * @arg TIM_DMABASE_CCMR2 - * @arg TIM_DMABASE_CCER - * @arg TIM_DMABASE_CNT - * @arg TIM_DMABASE_PSC - * @arg TIM_DMABASE_ARR - * @arg TIM_DMABASE_RCR - * @arg TIM_DMABASE_CCR1 - * @arg TIM_DMABASE_CCR2 - * @arg TIM_DMABASE_CCR3 - * @arg TIM_DMABASE_CCR4 - * @arg TIM_DMABASE_BDTR - * @arg TIM_DMABASE_OR - * @arg TIM_DMABASE_CCMR3 - * @arg TIM_DMABASE_CCR5 - * @arg TIM_DMABASE_CCR6 - * @arg TIM_DMABASE_AF1 (*) - * @arg TIM_DMABASE_AF2 (*) - * (*) value not defined in all devices - * @param BurstRequestSrc TIM DMA Request sources - * This parameter can be one of the following values: - * @arg TIM_DMA_UPDATE: TIM update Interrupt source - * @arg TIM_DMA_CC1: TIM Capture Compare 1 DMA source - * @arg TIM_DMA_CC2: TIM Capture Compare 2 DMA source - * @arg TIM_DMA_CC3: TIM Capture Compare 3 DMA source - * @arg TIM_DMA_CC4: TIM Capture Compare 4 DMA source - * @arg TIM_DMA_COM: TIM Commutation DMA source - * @arg TIM_DMA_TRIGGER: TIM Trigger DMA source - * @param BurstBuffer The Buffer address. - * @param BurstLength DMA Burst length. This parameter can be one value - * between: TIM_DMABURSTLENGTH_1TRANSFER and TIM_DMABURSTLENGTH_18TRANSFERS. - * @note This function should be used only when BurstLength is equal to DMA data transfer length. - * @retval HAL status - */ -HAL_StatusTypeDef HAL_TIM_DMABurst_ReadStart(TIM_HandleTypeDef *htim, uint32_t BurstBaseAddress, uint32_t BurstRequestSrc, - uint32_t *BurstBuffer, uint32_t BurstLength) -{ - /* Check the parameters */ - assert_param(IS_TIM_DMABURST_INSTANCE(htim->Instance)); - assert_param(IS_TIM_DMA_BASE(BurstBaseAddress)); - assert_param(IS_TIM_DMA_SOURCE(BurstRequestSrc)); - assert_param(IS_TIM_DMA_LENGTH(BurstLength)); - - if ((htim->State == HAL_TIM_STATE_BUSY)) - { - return HAL_BUSY; - } - else if ((htim->State == HAL_TIM_STATE_READY)) - { - if ((BurstBuffer == NULL) && (BurstLength > 0U)) - { - return HAL_ERROR; - } - else - { - htim->State = HAL_TIM_STATE_BUSY; - } - } - else - { - /* nothing to do */ - } - switch (BurstRequestSrc) - { - case TIM_DMA_UPDATE: - { - /* Set the DMA Period elapsed callbacks */ - htim->hdma[TIM_DMA_ID_UPDATE]->XferCpltCallback = TIM_DMAPeriodElapsedCplt; - htim->hdma[TIM_DMA_ID_UPDATE]->XferHalfCpltCallback = TIM_DMAPeriodElapsedHalfCplt; - - /* Set the DMA error callback */ - htim->hdma[TIM_DMA_ID_UPDATE]->XferErrorCallback = TIM_DMAError ; - - /* Enable the DMA stream */ - if (HAL_DMA_Start_IT(htim->hdma[TIM_DMA_ID_UPDATE], (uint32_t)&htim->Instance->DMAR, (uint32_t)BurstBuffer, ((BurstLength) >> 8U) + 1U) != HAL_OK) - { - return HAL_ERROR; - } - break; - } - case TIM_DMA_CC1: - { - /* Set the DMA capture callbacks */ - htim->hdma[TIM_DMA_ID_CC1]->XferCpltCallback = TIM_DMACaptureCplt; - htim->hdma[TIM_DMA_ID_CC1]->XferHalfCpltCallback = TIM_DMACaptureHalfCplt; - - /* Set the DMA error callback */ - htim->hdma[TIM_DMA_ID_CC1]->XferErrorCallback = TIM_DMAError ; - - /* Enable the DMA stream */ - if (HAL_DMA_Start_IT(htim->hdma[TIM_DMA_ID_CC1], (uint32_t)&htim->Instance->DMAR, (uint32_t)BurstBuffer, ((BurstLength) >> 8U) + 1U) != HAL_OK) - { - return HAL_ERROR; - } - break; - } - case TIM_DMA_CC2: - { - /* Set the DMA capture/compare callbacks */ - htim->hdma[TIM_DMA_ID_CC2]->XferCpltCallback = TIM_DMACaptureCplt; - htim->hdma[TIM_DMA_ID_CC2]->XferHalfCpltCallback = TIM_DMACaptureHalfCplt; - - /* Set the DMA error callback */ - htim->hdma[TIM_DMA_ID_CC2]->XferErrorCallback = TIM_DMAError ; - - /* Enable the DMA stream */ - if (HAL_DMA_Start_IT(htim->hdma[TIM_DMA_ID_CC2], (uint32_t)&htim->Instance->DMAR, (uint32_t)BurstBuffer, ((BurstLength) >> 8U) + 1U) != HAL_OK) - { - return HAL_ERROR; - } - break; - } - case TIM_DMA_CC3: - { - /* Set the DMA capture callbacks */ - htim->hdma[TIM_DMA_ID_CC3]->XferCpltCallback = TIM_DMACaptureCplt; - htim->hdma[TIM_DMA_ID_CC3]->XferHalfCpltCallback = TIM_DMACaptureHalfCplt; - - /* Set the DMA error callback */ - htim->hdma[TIM_DMA_ID_CC3]->XferErrorCallback = TIM_DMAError ; - - /* Enable the DMA stream */ - if (HAL_DMA_Start_IT(htim->hdma[TIM_DMA_ID_CC3], (uint32_t)&htim->Instance->DMAR, (uint32_t)BurstBuffer, ((BurstLength) >> 8U) + 1U) != HAL_OK) - { - return HAL_ERROR; - } - break; - } - case TIM_DMA_CC4: - { - /* Set the DMA capture callbacks */ - htim->hdma[TIM_DMA_ID_CC4]->XferCpltCallback = TIM_DMACaptureCplt; - htim->hdma[TIM_DMA_ID_CC4]->XferHalfCpltCallback = TIM_DMACaptureHalfCplt; - - /* Set the DMA error callback */ - htim->hdma[TIM_DMA_ID_CC4]->XferErrorCallback = TIM_DMAError ; - - /* Enable the DMA stream */ - if (HAL_DMA_Start_IT(htim->hdma[TIM_DMA_ID_CC4], (uint32_t)&htim->Instance->DMAR, (uint32_t)BurstBuffer, ((BurstLength) >> 8U) + 1U) != HAL_OK) - { - return HAL_ERROR; - } - break; - } - case TIM_DMA_COM: - { - /* Set the DMA commutation callbacks */ - htim->hdma[TIM_DMA_ID_COMMUTATION]->XferCpltCallback = TIMEx_DMACommutationCplt; - htim->hdma[TIM_DMA_ID_COMMUTATION]->XferHalfCpltCallback = TIMEx_DMACommutationHalfCplt; - - /* Set the DMA error callback */ - htim->hdma[TIM_DMA_ID_COMMUTATION]->XferErrorCallback = TIM_DMAError ; - - /* Enable the DMA stream */ - if (HAL_DMA_Start_IT(htim->hdma[TIM_DMA_ID_COMMUTATION], (uint32_t)&htim->Instance->DMAR, (uint32_t)BurstBuffer, ((BurstLength) >> 8U) + 1U) != HAL_OK) - { - return HAL_ERROR; - } - break; - } - case TIM_DMA_TRIGGER: - { - /* Set the DMA trigger callbacks */ - htim->hdma[TIM_DMA_ID_TRIGGER]->XferCpltCallback = TIM_DMATriggerCplt; - htim->hdma[TIM_DMA_ID_TRIGGER]->XferHalfCpltCallback = TIM_DMATriggerHalfCplt; - - /* Set the DMA error callback */ - htim->hdma[TIM_DMA_ID_TRIGGER]->XferErrorCallback = TIM_DMAError ; - - /* Enable the DMA stream */ - if (HAL_DMA_Start_IT(htim->hdma[TIM_DMA_ID_TRIGGER], (uint32_t)&htim->Instance->DMAR, (uint32_t)BurstBuffer, ((BurstLength) >> 8U) + 1U) != HAL_OK) - { - return HAL_ERROR; - } - break; - } - default: - break; - } - - /* configure the DMA Burst Mode */ - htim->Instance->DCR = (BurstBaseAddress | BurstLength); - - /* Enable the TIM DMA Request */ - __HAL_TIM_ENABLE_DMA(htim, BurstRequestSrc); - - htim->State = HAL_TIM_STATE_READY; - - /* Return function status */ - return HAL_OK; -} - -/** - * @brief Stop the DMA burst reading - * @param htim TIM handle - * @param BurstRequestSrc TIM DMA Request sources to disable. - * @retval HAL status - */ -HAL_StatusTypeDef HAL_TIM_DMABurst_ReadStop(TIM_HandleTypeDef *htim, uint32_t BurstRequestSrc) -{ - HAL_StatusTypeDef status = HAL_OK; - /* Check the parameters */ - assert_param(IS_TIM_DMA_SOURCE(BurstRequestSrc)); - - /* Abort the DMA transfer (at least disable the DMA stream) */ - switch (BurstRequestSrc) - { - case TIM_DMA_UPDATE: - { - status = HAL_DMA_Abort_IT(htim->hdma[TIM_DMA_ID_UPDATE]); - break; - } - case TIM_DMA_CC1: - { - status = HAL_DMA_Abort_IT(htim->hdma[TIM_DMA_ID_CC1]); - break; - } - case TIM_DMA_CC2: - { - status = HAL_DMA_Abort_IT(htim->hdma[TIM_DMA_ID_CC2]); - break; - } - case TIM_DMA_CC3: - { - status = HAL_DMA_Abort_IT(htim->hdma[TIM_DMA_ID_CC3]); - break; - } - case TIM_DMA_CC4: - { - status = HAL_DMA_Abort_IT(htim->hdma[TIM_DMA_ID_CC4]); - break; - } - case TIM_DMA_COM: - { - status = HAL_DMA_Abort_IT(htim->hdma[TIM_DMA_ID_COMMUTATION]); - break; - } - case TIM_DMA_TRIGGER: - { - status = HAL_DMA_Abort_IT(htim->hdma[TIM_DMA_ID_TRIGGER]); - break; - } - default: - break; - } - - if (HAL_OK == status) - { - /* Disable the TIM Update DMA request */ - __HAL_TIM_DISABLE_DMA(htim, BurstRequestSrc); - } - - /* Return function status */ - return status; -} - -/** - * @brief Generate a software event - * @param htim TIM handle - * @param EventSource specifies the event source. - * This parameter can be one of the following values: - * @arg TIM_EVENTSOURCE_UPDATE: Timer update Event source - * @arg TIM_EVENTSOURCE_CC1: Timer Capture Compare 1 Event source - * @arg TIM_EVENTSOURCE_CC2: Timer Capture Compare 2 Event source - * @arg TIM_EVENTSOURCE_CC3: Timer Capture Compare 3 Event source - * @arg TIM_EVENTSOURCE_CC4: Timer Capture Compare 4 Event source - * @arg TIM_EVENTSOURCE_COM: Timer COM event source - * @arg TIM_EVENTSOURCE_TRIGGER: Timer Trigger Event source - * @arg TIM_EVENTSOURCE_BREAK: Timer Break event source - * @arg TIM_EVENTSOURCE_BREAK2: Timer Break2 event source - * @note Basic timers can only generate an update event. - * @note TIM_EVENTSOURCE_COM is relevant only with advanced timer instances. - * @note TIM_EVENTSOURCE_BREAK and TIM_EVENTSOURCE_BREAK2 are relevant - * only for timer instances supporting break input(s). - * @retval HAL status - */ - -HAL_StatusTypeDef HAL_TIM_GenerateEvent(TIM_HandleTypeDef *htim, uint32_t EventSource) -{ - /* Check the parameters */ - assert_param(IS_TIM_INSTANCE(htim->Instance)); - assert_param(IS_TIM_EVENT_SOURCE(EventSource)); - - /* Process Locked */ - __HAL_LOCK(htim); - - /* Change the TIM state */ - htim->State = HAL_TIM_STATE_BUSY; - - /* Set the event sources */ - htim->Instance->EGR = EventSource; - - /* Change the TIM state */ - htim->State = HAL_TIM_STATE_READY; - - __HAL_UNLOCK(htim); - - /* Return function status */ - return HAL_OK; -} - -/** - * @brief Configures the OCRef clear feature - * @param htim TIM handle - * @param sClearInputConfig pointer to a TIM_ClearInputConfigTypeDef structure that - * contains the OCREF clear feature and parameters for the TIM peripheral. - * @param Channel specifies the TIM Channel - * This parameter can be one of the following values: - * @arg TIM_CHANNEL_1: TIM Channel 1 - * @arg TIM_CHANNEL_2: TIM Channel 2 - * @arg TIM_CHANNEL_3: TIM Channel 3 - * @arg TIM_CHANNEL_4: TIM Channel 4 - * @arg TIM_CHANNEL_5: TIM Channel 5 - * @arg TIM_CHANNEL_6: TIM Channel 6 - * @retval HAL status - */ -HAL_StatusTypeDef HAL_TIM_ConfigOCrefClear(TIM_HandleTypeDef *htim, - TIM_ClearInputConfigTypeDef *sClearInputConfig, - uint32_t Channel) -{ - /* Check the parameters */ - assert_param(IS_TIM_OCXREF_CLEAR_INSTANCE(htim->Instance)); - assert_param(IS_TIM_CLEARINPUT_SOURCE(sClearInputConfig->ClearInputSource)); - - /* Process Locked */ - __HAL_LOCK(htim); - - htim->State = HAL_TIM_STATE_BUSY; - - switch (sClearInputConfig->ClearInputSource) - { - case TIM_CLEARINPUTSOURCE_NONE: - { - /* Clear the OCREF clear selection bit and the the ETR Bits */ - CLEAR_BIT(htim->Instance->SMCR, (TIM_SMCR_ETF | TIM_SMCR_ETPS | TIM_SMCR_ECE | TIM_SMCR_ETP)); - break; - } - - case TIM_CLEARINPUTSOURCE_ETR: - { - /* Check the parameters */ - assert_param(IS_TIM_CLEARINPUT_POLARITY(sClearInputConfig->ClearInputPolarity)); - assert_param(IS_TIM_CLEARINPUT_PRESCALER(sClearInputConfig->ClearInputPrescaler)); - assert_param(IS_TIM_CLEARINPUT_FILTER(sClearInputConfig->ClearInputFilter)); - - /* When OCRef clear feature is used with ETR source, ETR prescaler must be off */ - if (sClearInputConfig->ClearInputPrescaler != TIM_CLEARINPUTPRESCALER_DIV1) - { - htim->State = HAL_TIM_STATE_READY; - __HAL_UNLOCK(htim); - return HAL_ERROR; - } - - TIM_ETR_SetConfig(htim->Instance, - sClearInputConfig->ClearInputPrescaler, - sClearInputConfig->ClearInputPolarity, - sClearInputConfig->ClearInputFilter); - break; - } - - default: - break; - } - - switch (Channel) - { - case TIM_CHANNEL_1: - { - if (sClearInputConfig->ClearInputState != (uint32_t)DISABLE) - { - /* Enable the OCREF clear feature for Channel 1 */ - SET_BIT(htim->Instance->CCMR1, TIM_CCMR1_OC1CE); - } - else - { - /* Disable the OCREF clear feature for Channel 1 */ - CLEAR_BIT(htim->Instance->CCMR1, TIM_CCMR1_OC1CE); - } - break; - } - case TIM_CHANNEL_2: - { - if (sClearInputConfig->ClearInputState != (uint32_t)DISABLE) - { - /* Enable the OCREF clear feature for Channel 2 */ - SET_BIT(htim->Instance->CCMR1, TIM_CCMR1_OC2CE); - } - else - { - /* Disable the OCREF clear feature for Channel 2 */ - CLEAR_BIT(htim->Instance->CCMR1, TIM_CCMR1_OC2CE); - } - break; - } - case TIM_CHANNEL_3: - { - if (sClearInputConfig->ClearInputState != (uint32_t)DISABLE) - { - /* Enable the OCREF clear feature for Channel 3 */ - SET_BIT(htim->Instance->CCMR2, TIM_CCMR2_OC3CE); - } - else - { - /* Disable the OCREF clear feature for Channel 3 */ - CLEAR_BIT(htim->Instance->CCMR2, TIM_CCMR2_OC3CE); - } - break; - } - case TIM_CHANNEL_4: - { - if (sClearInputConfig->ClearInputState != (uint32_t)DISABLE) - { - /* Enable the OCREF clear feature for Channel 4 */ - SET_BIT(htim->Instance->CCMR2, TIM_CCMR2_OC4CE); - } - else - { - /* Disable the OCREF clear feature for Channel 4 */ - CLEAR_BIT(htim->Instance->CCMR2, TIM_CCMR2_OC4CE); - } - break; - } - case TIM_CHANNEL_5: - { - if (sClearInputConfig->ClearInputState != (uint32_t)DISABLE) - { - /* Enable the OCREF clear feature for Channel 5 */ - SET_BIT(htim->Instance->CCMR3, TIM_CCMR3_OC5CE); - } - else - { - /* Disable the OCREF clear feature for Channel 5 */ - CLEAR_BIT(htim->Instance->CCMR3, TIM_CCMR3_OC5CE); - } - break; - } - case TIM_CHANNEL_6: - { - if (sClearInputConfig->ClearInputState != (uint32_t)DISABLE) - { - /* Enable the OCREF clear feature for Channel 6 */ - SET_BIT(htim->Instance->CCMR3, TIM_CCMR3_OC6CE); - } - else - { - /* Disable the OCREF clear feature for Channel 6 */ - CLEAR_BIT(htim->Instance->CCMR3, TIM_CCMR3_OC6CE); - } - break; - } - default: - break; - } - - htim->State = HAL_TIM_STATE_READY; - - __HAL_UNLOCK(htim); - - return HAL_OK; -} - -/** - * @brief Configures the clock source to be used - * @param htim TIM handle - * @param sClockSourceConfig pointer to a TIM_ClockConfigTypeDef structure that - * contains the clock source information for the TIM peripheral. - * @retval HAL status - */ -HAL_StatusTypeDef HAL_TIM_ConfigClockSource(TIM_HandleTypeDef *htim, TIM_ClockConfigTypeDef *sClockSourceConfig) -{ - uint32_t tmpsmcr; - - /* Process Locked */ - __HAL_LOCK(htim); - - htim->State = HAL_TIM_STATE_BUSY; - - /* Check the parameters */ - assert_param(IS_TIM_CLOCKSOURCE(sClockSourceConfig->ClockSource)); - - /* Reset the SMS, TS, ECE, ETPS and ETRF bits */ - tmpsmcr = htim->Instance->SMCR; - tmpsmcr &= ~(TIM_SMCR_SMS | TIM_SMCR_TS); - tmpsmcr &= ~(TIM_SMCR_ETF | TIM_SMCR_ETPS | TIM_SMCR_ECE | TIM_SMCR_ETP); - htim->Instance->SMCR = tmpsmcr; - - switch (sClockSourceConfig->ClockSource) - { - case TIM_CLOCKSOURCE_INTERNAL: - { - assert_param(IS_TIM_INSTANCE(htim->Instance)); - break; - } - - case TIM_CLOCKSOURCE_ETRMODE1: - { - /* Check whether or not the timer instance supports external trigger input mode 1 (ETRF)*/ - assert_param(IS_TIM_CLOCKSOURCE_ETRMODE1_INSTANCE(htim->Instance)); - - /* Check ETR input conditioning related parameters */ - assert_param(IS_TIM_CLOCKPRESCALER(sClockSourceConfig->ClockPrescaler)); - assert_param(IS_TIM_CLOCKPOLARITY(sClockSourceConfig->ClockPolarity)); - assert_param(IS_TIM_CLOCKFILTER(sClockSourceConfig->ClockFilter)); - - /* Configure the ETR Clock source */ - TIM_ETR_SetConfig(htim->Instance, - sClockSourceConfig->ClockPrescaler, - sClockSourceConfig->ClockPolarity, - sClockSourceConfig->ClockFilter); - - /* Select the External clock mode1 and the ETRF trigger */ - tmpsmcr = htim->Instance->SMCR; - tmpsmcr |= (TIM_SLAVEMODE_EXTERNAL1 | TIM_CLOCKSOURCE_ETRMODE1); - /* Write to TIMx SMCR */ - htim->Instance->SMCR = tmpsmcr; - break; - } - - case TIM_CLOCKSOURCE_ETRMODE2: - { - /* Check whether or not the timer instance supports external trigger input mode 2 (ETRF)*/ - assert_param(IS_TIM_CLOCKSOURCE_ETRMODE2_INSTANCE(htim->Instance)); - - /* Check ETR input conditioning related parameters */ - assert_param(IS_TIM_CLOCKPRESCALER(sClockSourceConfig->ClockPrescaler)); - assert_param(IS_TIM_CLOCKPOLARITY(sClockSourceConfig->ClockPolarity)); - assert_param(IS_TIM_CLOCKFILTER(sClockSourceConfig->ClockFilter)); - - /* Configure the ETR Clock source */ - TIM_ETR_SetConfig(htim->Instance, - sClockSourceConfig->ClockPrescaler, - sClockSourceConfig->ClockPolarity, - sClockSourceConfig->ClockFilter); - /* Enable the External clock mode2 */ - htim->Instance->SMCR |= TIM_SMCR_ECE; - break; - } - - case TIM_CLOCKSOURCE_TI1: - { - /* Check whether or not the timer instance supports external clock mode 1 */ - assert_param(IS_TIM_CLOCKSOURCE_TIX_INSTANCE(htim->Instance)); - - /* Check TI1 input conditioning related parameters */ - assert_param(IS_TIM_CLOCKPOLARITY(sClockSourceConfig->ClockPolarity)); - assert_param(IS_TIM_CLOCKFILTER(sClockSourceConfig->ClockFilter)); - - TIM_TI1_ConfigInputStage(htim->Instance, - sClockSourceConfig->ClockPolarity, - sClockSourceConfig->ClockFilter); - TIM_ITRx_SetConfig(htim->Instance, TIM_CLOCKSOURCE_TI1); - break; - } - - case TIM_CLOCKSOURCE_TI2: - { - /* Check whether or not the timer instance supports external clock mode 1 (ETRF)*/ - assert_param(IS_TIM_CLOCKSOURCE_TIX_INSTANCE(htim->Instance)); - - /* Check TI2 input conditioning related parameters */ - assert_param(IS_TIM_CLOCKPOLARITY(sClockSourceConfig->ClockPolarity)); - assert_param(IS_TIM_CLOCKFILTER(sClockSourceConfig->ClockFilter)); - - TIM_TI2_ConfigInputStage(htim->Instance, - sClockSourceConfig->ClockPolarity, - sClockSourceConfig->ClockFilter); - TIM_ITRx_SetConfig(htim->Instance, TIM_CLOCKSOURCE_TI2); - break; - } - - case TIM_CLOCKSOURCE_TI1ED: - { - /* Check whether or not the timer instance supports external clock mode 1 */ - assert_param(IS_TIM_CLOCKSOURCE_TIX_INSTANCE(htim->Instance)); - - /* Check TI1 input conditioning related parameters */ - assert_param(IS_TIM_CLOCKPOLARITY(sClockSourceConfig->ClockPolarity)); - assert_param(IS_TIM_CLOCKFILTER(sClockSourceConfig->ClockFilter)); - - TIM_TI1_ConfigInputStage(htim->Instance, - sClockSourceConfig->ClockPolarity, - sClockSourceConfig->ClockFilter); - TIM_ITRx_SetConfig(htim->Instance, TIM_CLOCKSOURCE_TI1ED); - break; - } - - case TIM_CLOCKSOURCE_ITR0: - case TIM_CLOCKSOURCE_ITR1: - case TIM_CLOCKSOURCE_ITR2: - case TIM_CLOCKSOURCE_ITR3: - { - /* Check whether or not the timer instance supports internal trigger input */ - assert_param(IS_TIM_CLOCKSOURCE_ITRX_INSTANCE(htim->Instance)); - - TIM_ITRx_SetConfig(htim->Instance, sClockSourceConfig->ClockSource); - break; - } - - default: - break; - } - htim->State = HAL_TIM_STATE_READY; - - __HAL_UNLOCK(htim); - - return HAL_OK; -} - -/** - * @brief Selects the signal connected to the TI1 input: direct from CH1_input - * or a XOR combination between CH1_input, CH2_input & CH3_input - * @param htim TIM handle. - * @param TI1_Selection Indicate whether or not channel 1 is connected to the - * output of a XOR gate. - * This parameter can be one of the following values: - * @arg TIM_TI1SELECTION_CH1: The TIMx_CH1 pin is connected to TI1 input - * @arg TIM_TI1SELECTION_XORCOMBINATION: The TIMx_CH1, CH2 and CH3 - * pins are connected to the TI1 input (XOR combination) - * @retval HAL status - */ -HAL_StatusTypeDef HAL_TIM_ConfigTI1Input(TIM_HandleTypeDef *htim, uint32_t TI1_Selection) -{ - uint32_t tmpcr2; - - /* Check the parameters */ - assert_param(IS_TIM_XOR_INSTANCE(htim->Instance)); - assert_param(IS_TIM_TI1SELECTION(TI1_Selection)); - - /* Get the TIMx CR2 register value */ - tmpcr2 = htim->Instance->CR2; - - /* Reset the TI1 selection */ - tmpcr2 &= ~TIM_CR2_TI1S; - - /* Set the TI1 selection */ - tmpcr2 |= TI1_Selection; - - /* Write to TIMxCR2 */ - htim->Instance->CR2 = tmpcr2; - - return HAL_OK; -} - -/** - * @brief Configures the TIM in Slave mode - * @param htim TIM handle. - * @param sSlaveConfig pointer to a TIM_SlaveConfigTypeDef structure that - * contains the selected trigger (internal trigger input, filtered - * timer input or external trigger input) and the Slave mode - * (Disable, Reset, Gated, Trigger, External clock mode 1). - * @retval HAL status - */ -HAL_StatusTypeDef HAL_TIM_SlaveConfigSynchro(TIM_HandleTypeDef *htim, TIM_SlaveConfigTypeDef *sSlaveConfig) -{ - /* Check the parameters */ - assert_param(IS_TIM_SLAVE_INSTANCE(htim->Instance)); - assert_param(IS_TIM_SLAVE_MODE(sSlaveConfig->SlaveMode)); - assert_param(IS_TIM_TRIGGER_SELECTION(sSlaveConfig->InputTrigger)); - - __HAL_LOCK(htim); - - htim->State = HAL_TIM_STATE_BUSY; - - if(TIM_SlaveTimer_SetConfig(htim, sSlaveConfig) != HAL_OK) - { - htim->State = HAL_TIM_STATE_READY; - __HAL_UNLOCK(htim); - return HAL_ERROR; - } - - /* Disable Trigger Interrupt */ - __HAL_TIM_DISABLE_IT(htim, TIM_IT_TRIGGER); - - /* Disable Trigger DMA request */ - __HAL_TIM_DISABLE_DMA(htim, TIM_DMA_TRIGGER); - - htim->State = HAL_TIM_STATE_READY; - - __HAL_UNLOCK(htim); - - return HAL_OK; -} - -/** - * @brief Configures the TIM in Slave mode in interrupt mode - * @param htim TIM handle. - * @param sSlaveConfig pointer to a TIM_SlaveConfigTypeDef structure that - * contains the selected trigger (internal trigger input, filtered - * timer input or external trigger input) and the Slave mode - * (Disable, Reset, Gated, Trigger, External clock mode 1). - * @retval HAL status - */ -HAL_StatusTypeDef HAL_TIM_SlaveConfigSynchro_IT(TIM_HandleTypeDef *htim, - TIM_SlaveConfigTypeDef *sSlaveConfig) -{ - /* Check the parameters */ - assert_param(IS_TIM_SLAVE_INSTANCE(htim->Instance)); - assert_param(IS_TIM_SLAVE_MODE(sSlaveConfig->SlaveMode)); - assert_param(IS_TIM_TRIGGER_SELECTION(sSlaveConfig->InputTrigger)); - - __HAL_LOCK(htim); - - htim->State = HAL_TIM_STATE_BUSY; - - if(TIM_SlaveTimer_SetConfig(htim, sSlaveConfig) != HAL_OK) - { - htim->State = HAL_TIM_STATE_READY; - __HAL_UNLOCK(htim); - return HAL_ERROR; - } - - /* Enable Trigger Interrupt */ - __HAL_TIM_ENABLE_IT(htim, TIM_IT_TRIGGER); - - /* Disable Trigger DMA request */ - __HAL_TIM_DISABLE_DMA(htim, TIM_DMA_TRIGGER); - - htim->State = HAL_TIM_STATE_READY; - - __HAL_UNLOCK(htim); - - return HAL_OK; -} - -/** - * @brief Read the captured value from Capture Compare unit - * @param htim TIM handle. - * @param Channel TIM Channels to be enabled - * This parameter can be one of the following values: - * @arg TIM_CHANNEL_1: TIM Channel 1 selected - * @arg TIM_CHANNEL_2: TIM Channel 2 selected - * @arg TIM_CHANNEL_3: TIM Channel 3 selected - * @arg TIM_CHANNEL_4: TIM Channel 4 selected - * @retval Captured value - */ -uint32_t HAL_TIM_ReadCapturedValue(TIM_HandleTypeDef *htim, uint32_t Channel) -{ - uint32_t tmpreg = 0U; - - switch (Channel) - { - case TIM_CHANNEL_1: - { - /* Check the parameters */ - assert_param(IS_TIM_CC1_INSTANCE(htim->Instance)); - - /* Return the capture 1 value */ - tmpreg = htim->Instance->CCR1; - - break; - } - case TIM_CHANNEL_2: - { - /* Check the parameters */ - assert_param(IS_TIM_CC2_INSTANCE(htim->Instance)); - - /* Return the capture 2 value */ - tmpreg = htim->Instance->CCR2; - - break; - } - - case TIM_CHANNEL_3: - { - /* Check the parameters */ - assert_param(IS_TIM_CC3_INSTANCE(htim->Instance)); - - /* Return the capture 3 value */ - tmpreg = htim->Instance->CCR3; - - break; - } - - case TIM_CHANNEL_4: - { - /* Check the parameters */ - assert_param(IS_TIM_CC4_INSTANCE(htim->Instance)); - - /* Return the capture 4 value */ - tmpreg = htim->Instance->CCR4; - - break; - } - - default: - break; - } - - return tmpreg; -} - -/** - * @} - */ - -/** @defgroup TIM_Exported_Functions_Group9 TIM Callbacks functions - * @brief TIM Callbacks functions - * -@verbatim - ============================================================================== - ##### TIM Callbacks functions ##### - ============================================================================== - [..] - This section provides TIM callback functions: - (+) TIM Period elapsed callback - (+) TIM Output Compare callback - (+) TIM Input capture callback - (+) TIM Trigger callback - (+) TIM Error callback - -@endverbatim - * @{ - */ - -/** - * @brief Period elapsed callback in non-blocking mode - * @param htim TIM handle - * @retval None - */ -__weak void HAL_TIM_PeriodElapsedCallback(TIM_HandleTypeDef *htim) -{ - /* Prevent unused argument(s) compilation warning */ - UNUSED(htim); - - /* NOTE : This function should not be modified, when the callback is needed, - the HAL_TIM_PeriodElapsedCallback could be implemented in the user file - */ -} - -/** - * @brief Period elapsed half complete callback in non-blocking mode - * @param htim TIM handle - * @retval None - */ -__weak void HAL_TIM_PeriodElapsedHalfCpltCallback(TIM_HandleTypeDef *htim) -{ - /* Prevent unused argument(s) compilation warning */ - UNUSED(htim); - - /* NOTE : This function should not be modified, when the callback is needed, - the HAL_TIM_PeriodElapsedHalfCpltCallback could be implemented in the user file - */ -} - -/** - * @brief Output Compare callback in non-blocking mode - * @param htim TIM OC handle - * @retval None - */ -__weak void HAL_TIM_OC_DelayElapsedCallback(TIM_HandleTypeDef *htim) -{ - /* Prevent unused argument(s) compilation warning */ - UNUSED(htim); - - /* NOTE : This function should not be modified, when the callback is needed, - the HAL_TIM_OC_DelayElapsedCallback could be implemented in the user file - */ -} - -/** - * @brief Input Capture callback in non-blocking mode - * @param htim TIM IC handle - * @retval None - */ -__weak void HAL_TIM_IC_CaptureCallback(TIM_HandleTypeDef *htim) -{ - /* Prevent unused argument(s) compilation warning */ - UNUSED(htim); - - /* NOTE : This function should not be modified, when the callback is needed, - the HAL_TIM_IC_CaptureCallback could be implemented in the user file - */ -} - -/** - * @brief Input Capture half complete callback in non-blocking mode - * @param htim TIM IC handle - * @retval None - */ -__weak void HAL_TIM_IC_CaptureHalfCpltCallback(TIM_HandleTypeDef *htim) -{ - /* Prevent unused argument(s) compilation warning */ - UNUSED(htim); - - /* NOTE : This function should not be modified, when the callback is needed, - the HAL_TIM_IC_CaptureHalfCpltCallback could be implemented in the user file - */ -} - -/** - * @brief PWM Pulse finished callback in non-blocking mode - * @param htim TIM handle - * @retval None - */ -__weak void HAL_TIM_PWM_PulseFinishedCallback(TIM_HandleTypeDef *htim) -{ - /* Prevent unused argument(s) compilation warning */ - UNUSED(htim); - - /* NOTE : This function should not be modified, when the callback is needed, - the HAL_TIM_PWM_PulseFinishedCallback could be implemented in the user file - */ -} - -/** - * @brief PWM Pulse finished half complete callback in non-blocking mode - * @param htim TIM handle - * @retval None - */ -__weak void HAL_TIM_PWM_PulseFinishedHalfCpltCallback(TIM_HandleTypeDef *htim) -{ - /* Prevent unused argument(s) compilation warning */ - UNUSED(htim); - - /* NOTE : This function should not be modified, when the callback is needed, - the HAL_TIM_PWM_PulseFinishedHalfCpltCallback could be implemented in the user file - */ -} - -/** - * @brief Hall Trigger detection callback in non-blocking mode - * @param htim TIM handle - * @retval None - */ -__weak void HAL_TIM_TriggerCallback(TIM_HandleTypeDef *htim) -{ - /* Prevent unused argument(s) compilation warning */ - UNUSED(htim); - - /* NOTE : This function should not be modified, when the callback is needed, - the HAL_TIM_TriggerCallback could be implemented in the user file - */ -} - -/** - * @brief Hall Trigger detection half complete callback in non-blocking mode - * @param htim TIM handle - * @retval None - */ -__weak void HAL_TIM_TriggerHalfCpltCallback(TIM_HandleTypeDef *htim) -{ - /* Prevent unused argument(s) compilation warning */ - UNUSED(htim); - - /* NOTE : This function should not be modified, when the callback is needed, - the HAL_TIM_TriggerHalfCpltCallback could be implemented in the user file - */ -} - -/** - * @brief Timer error callback in non-blocking mode - * @param htim TIM handle - * @retval None - */ -__weak void HAL_TIM_ErrorCallback(TIM_HandleTypeDef *htim) -{ - /* Prevent unused argument(s) compilation warning */ - UNUSED(htim); - - /* NOTE : This function should not be modified, when the callback is needed, - the HAL_TIM_ErrorCallback could be implemented in the user file - */ -} - -#if (USE_HAL_TIM_REGISTER_CALLBACKS == 1) -/** - * @brief Register a User TIM callback to be used instead of the weak predefined callback - * @param htim tim handle - * @param CallbackID ID of the callback to be registered - * This parameter can be one of the following values: - * @arg @ref HAL_TIM_BASE_MSPINIT_CB_ID Base MspInit Callback ID - * @arg @ref HAL_TIM_BASE_MSPDEINIT_CB_ID Base MspDeInit Callback ID - * @arg @ref HAL_TIM_IC_MSPINIT_CB_ID IC MspInit Callback ID - * @arg @ref HAL_TIM_IC_MSPDEINIT_CB_ID IC MspDeInit Callback ID - * @arg @ref HAL_TIM_OC_MSPINIT_CB_ID OC MspInit Callback ID - * @arg @ref HAL_TIM_OC_MSPDEINIT_CB_ID OC MspDeInit Callback ID - * @arg @ref HAL_TIM_PWM_MSPINIT_CB_ID PWM MspInit Callback ID - * @arg @ref HAL_TIM_PWM_MSPDEINIT_CB_ID PWM MspDeInit Callback ID - * @arg @ref HAL_TIM_ONE_PULSE_MSPINIT_CB_ID One Pulse MspInit Callback ID - * @arg @ref HAL_TIM_ONE_PULSE_MSPDEINIT_CB_ID One Pulse MspDeInit Callback ID - * @arg @ref HAL_TIM_ENCODER_MSPINIT_CB_ID Encoder MspInit Callback ID - * @arg @ref HAL_TIM_ENCODER_MSPDEINIT_CB_ID Encoder MspDeInit Callback ID - * @arg @ref HAL_TIM_HALL_SENSOR_MSPINIT_CB_ID Hall Sensor MspInit Callback ID - * @arg @ref HAL_TIM_HALL_SENSOR_MSPDEINIT_CB_ID Hall Sensor MspDeInit Callback ID - * @arg @ref HAL_TIM_PERIOD_ELAPSED_CB_ID Period Elapsed Callback ID - * @arg @ref HAL_TIM_PERIOD_ELAPSED_HALF_CB_ID Period Elapsed half complete Callback ID - * @arg @ref HAL_TIM_TRIGGER_CB_ID Trigger Callback ID - * @arg @ref HAL_TIM_TRIGGER_HALF_CB_ID Trigger half complete Callback ID - * @arg @ref HAL_TIM_IC_CAPTURE_CB_ID Input Capture Callback ID - * @arg @ref HAL_TIM_IC_CAPTURE_HALF_CB_ID Input Capture half complete Callback ID - * @arg @ref HAL_TIM_OC_DELAY_ELAPSED_CB_ID Output Compare Delay Elapsed Callback ID - * @arg @ref HAL_TIM_PWM_PULSE_FINISHED_CB_ID PWM Pulse Finished Callback ID - * @arg @ref HAL_TIM_PWM_PULSE_FINISHED_HALF_CB_ID PWM Pulse Finished half complete Callback ID - * @arg @ref HAL_TIM_ERROR_CB_ID Error Callback ID - * @arg @ref HAL_TIM_COMMUTATION_CB_ID Commutation Callback ID - * @arg @ref HAL_TIM_COMMUTATION_HALF_CB_ID Commutation half complete Callback ID - * @arg @ref HAL_TIM_BREAK_CB_ID Break Callback ID - * @arg @ref HAL_TIM_BREAK2_CB_ID Break2 Callback ID - * @param pCallback pointer to the callback function - * @retval status - */ -HAL_StatusTypeDef HAL_TIM_RegisterCallback(TIM_HandleTypeDef *htim, HAL_TIM_CallbackIDTypeDef CallbackID, pTIM_CallbackTypeDef pCallback) -{ - HAL_StatusTypeDef status = HAL_OK; - - if (pCallback == NULL) - { - return HAL_ERROR; - } - /* Process locked */ - __HAL_LOCK(htim); - - if (htim->State == HAL_TIM_STATE_READY) - { - switch (CallbackID) - { - case HAL_TIM_BASE_MSPINIT_CB_ID : - htim->Base_MspInitCallback = pCallback; - break; - - case HAL_TIM_BASE_MSPDEINIT_CB_ID : - htim->Base_MspDeInitCallback = pCallback; - break; - - case HAL_TIM_IC_MSPINIT_CB_ID : - htim->IC_MspInitCallback = pCallback; - break; - - case HAL_TIM_IC_MSPDEINIT_CB_ID : - htim->IC_MspDeInitCallback = pCallback; - break; - - case HAL_TIM_OC_MSPINIT_CB_ID : - htim->OC_MspInitCallback = pCallback; - break; - - case HAL_TIM_OC_MSPDEINIT_CB_ID : - htim->OC_MspDeInitCallback = pCallback; - break; - - case HAL_TIM_PWM_MSPINIT_CB_ID : - htim->PWM_MspInitCallback = pCallback; - break; - - case HAL_TIM_PWM_MSPDEINIT_CB_ID : - htim->PWM_MspDeInitCallback = pCallback; - break; - - case HAL_TIM_ONE_PULSE_MSPINIT_CB_ID : - htim->OnePulse_MspInitCallback = pCallback; - break; - - case HAL_TIM_ONE_PULSE_MSPDEINIT_CB_ID : - htim->OnePulse_MspDeInitCallback = pCallback; - break; - - case HAL_TIM_ENCODER_MSPINIT_CB_ID : - htim->Encoder_MspInitCallback = pCallback; - break; - - case HAL_TIM_ENCODER_MSPDEINIT_CB_ID : - htim->Encoder_MspDeInitCallback = pCallback; - break; - - case HAL_TIM_HALL_SENSOR_MSPINIT_CB_ID : - htim->HallSensor_MspInitCallback = pCallback; - break; - - case HAL_TIM_HALL_SENSOR_MSPDEINIT_CB_ID : - htim->HallSensor_MspDeInitCallback = pCallback; - break; - - case HAL_TIM_PERIOD_ELAPSED_CB_ID : - htim->PeriodElapsedCallback = pCallback; - break; - - case HAL_TIM_PERIOD_ELAPSED_HALF_CB_ID : - htim->PeriodElapsedHalfCpltCallback = pCallback; - break; - - case HAL_TIM_TRIGGER_CB_ID : - htim->TriggerCallback = pCallback; - break; - - case HAL_TIM_TRIGGER_HALF_CB_ID : - htim->TriggerHalfCpltCallback = pCallback; - break; - - case HAL_TIM_IC_CAPTURE_CB_ID : - htim->IC_CaptureCallback = pCallback; - break; - - case HAL_TIM_IC_CAPTURE_HALF_CB_ID : - htim->IC_CaptureHalfCpltCallback = pCallback; - break; - - case HAL_TIM_OC_DELAY_ELAPSED_CB_ID : - htim->OC_DelayElapsedCallback = pCallback; - break; - - case HAL_TIM_PWM_PULSE_FINISHED_CB_ID : - htim->PWM_PulseFinishedCallback = pCallback; - break; - - case HAL_TIM_PWM_PULSE_FINISHED_HALF_CB_ID : - htim->PWM_PulseFinishedHalfCpltCallback = pCallback; - break; - - case HAL_TIM_ERROR_CB_ID : - htim->ErrorCallback = pCallback; - break; - - case HAL_TIM_COMMUTATION_CB_ID : - htim->CommutationCallback = pCallback; - break; - - case HAL_TIM_COMMUTATION_HALF_CB_ID : - htim->CommutationHalfCpltCallback = pCallback; - break; - - case HAL_TIM_BREAK_CB_ID : - htim->BreakCallback = pCallback; - break; - - case HAL_TIM_BREAK2_CB_ID : - htim->Break2Callback = pCallback; - break; - - default : - /* Return error status */ - status = HAL_ERROR; - break; - } - } - else if (htim->State == HAL_TIM_STATE_RESET) - { - switch (CallbackID) - { - case HAL_TIM_BASE_MSPINIT_CB_ID : - htim->Base_MspInitCallback = pCallback; - break; - - case HAL_TIM_BASE_MSPDEINIT_CB_ID : - htim->Base_MspDeInitCallback = pCallback; - break; - - case HAL_TIM_IC_MSPINIT_CB_ID : - htim->IC_MspInitCallback = pCallback; - break; - - case HAL_TIM_IC_MSPDEINIT_CB_ID : - htim->IC_MspDeInitCallback = pCallback; - break; - - case HAL_TIM_OC_MSPINIT_CB_ID : - htim->OC_MspInitCallback = pCallback; - break; - - case HAL_TIM_OC_MSPDEINIT_CB_ID : - htim->OC_MspDeInitCallback = pCallback; - break; - - case HAL_TIM_PWM_MSPINIT_CB_ID : - htim->PWM_MspInitCallback = pCallback; - break; - - case HAL_TIM_PWM_MSPDEINIT_CB_ID : - htim->PWM_MspDeInitCallback = pCallback; - break; - - case HAL_TIM_ONE_PULSE_MSPINIT_CB_ID : - htim->OnePulse_MspInitCallback = pCallback; - break; - - case HAL_TIM_ONE_PULSE_MSPDEINIT_CB_ID : - htim->OnePulse_MspDeInitCallback = pCallback; - break; - - case HAL_TIM_ENCODER_MSPINIT_CB_ID : - htim->Encoder_MspInitCallback = pCallback; - break; - - case HAL_TIM_ENCODER_MSPDEINIT_CB_ID : - htim->Encoder_MspDeInitCallback = pCallback; - break; - - case HAL_TIM_HALL_SENSOR_MSPINIT_CB_ID : - htim->HallSensor_MspInitCallback = pCallback; - break; - - case HAL_TIM_HALL_SENSOR_MSPDEINIT_CB_ID : - htim->HallSensor_MspDeInitCallback = pCallback; - break; - - default : - /* Return error status */ - status = HAL_ERROR; - break; - } - } - else - { - /* Return error status */ - status = HAL_ERROR; - } - - /* Release Lock */ - __HAL_UNLOCK(htim); - - return status; -} - -/** - * @brief Unregister a TIM callback - * TIM callback is redirected to the weak predefined callback - * @param htim tim handle - * @param CallbackID ID of the callback to be unregistered - * This parameter can be one of the following values: - * @arg @ref HAL_TIM_BASE_MSPINIT_CB_ID Base MspInit Callback ID - * @arg @ref HAL_TIM_BASE_MSPDEINIT_CB_ID Base MspDeInit Callback ID - * @arg @ref HAL_TIM_IC_MSPINIT_CB_ID IC MspInit Callback ID - * @arg @ref HAL_TIM_IC_MSPDEINIT_CB_ID IC MspDeInit Callback ID - * @arg @ref HAL_TIM_OC_MSPINIT_CB_ID OC MspInit Callback ID - * @arg @ref HAL_TIM_OC_MSPDEINIT_CB_ID OC MspDeInit Callback ID - * @arg @ref HAL_TIM_PWM_MSPINIT_CB_ID PWM MspInit Callback ID - * @arg @ref HAL_TIM_PWM_MSPDEINIT_CB_ID PWM MspDeInit Callback ID - * @arg @ref HAL_TIM_ONE_PULSE_MSPINIT_CB_ID One Pulse MspInit Callback ID - * @arg @ref HAL_TIM_ONE_PULSE_MSPDEINIT_CB_ID One Pulse MspDeInit Callback ID - * @arg @ref HAL_TIM_ENCODER_MSPINIT_CB_ID Encoder MspInit Callback ID - * @arg @ref HAL_TIM_ENCODER_MSPDEINIT_CB_ID Encoder MspDeInit Callback ID - * @arg @ref HAL_TIM_HALL_SENSOR_MSPINIT_CB_ID Hall Sensor MspInit Callback ID - * @arg @ref HAL_TIM_HALL_SENSOR_MSPDEINIT_CB_ID Hall Sensor MspDeInit Callback ID - * @arg @ref HAL_TIM_PERIOD_ELAPSED_CB_ID Period Elapsed Callback ID - * @arg @ref HAL_TIM_PERIOD_ELAPSED_HALF_CB_ID Period Elapsed half complete Callback ID - * @arg @ref HAL_TIM_TRIGGER_CB_ID Trigger Callback ID - * @arg @ref HAL_TIM_TRIGGER_HALF_CB_ID Trigger half complete Callback ID - * @arg @ref HAL_TIM_IC_CAPTURE_CB_ID Input Capture Callback ID - * @arg @ref HAL_TIM_IC_CAPTURE_HALF_CB_ID Input Capture half complete Callback ID - * @arg @ref HAL_TIM_OC_DELAY_ELAPSED_CB_ID Output Compare Delay Elapsed Callback ID - * @arg @ref HAL_TIM_PWM_PULSE_FINISHED_CB_ID PWM Pulse Finished Callback ID - * @arg @ref HAL_TIM_PWM_PULSE_FINISHED_HALF_CB_ID PWM Pulse Finished half complete Callback ID - * @arg @ref HAL_TIM_ERROR_CB_ID Error Callback ID - * @arg @ref HAL_TIM_COMMUTATION_CB_ID Commutation Callback ID - * @arg @ref HAL_TIM_COMMUTATION_HALF_CB_ID Commutation half complete Callback ID - * @arg @ref HAL_TIM_BREAK_CB_ID Break Callback ID - * @arg @ref HAL_TIM_BREAK2_CB_ID Break2 Callback ID - * @retval status - */ -HAL_StatusTypeDef HAL_TIM_UnRegisterCallback(TIM_HandleTypeDef *htim, HAL_TIM_CallbackIDTypeDef CallbackID) -{ - HAL_StatusTypeDef status = HAL_OK; - - /* Process locked */ - __HAL_LOCK(htim); - - if (htim->State == HAL_TIM_STATE_READY) - { - switch (CallbackID) - { - case HAL_TIM_BASE_MSPINIT_CB_ID : - htim->Base_MspInitCallback = HAL_TIM_Base_MspInit; /* Legacy weak Base MspInit Callback */ - break; - - case HAL_TIM_BASE_MSPDEINIT_CB_ID : - htim->Base_MspDeInitCallback = HAL_TIM_Base_MspDeInit; /* Legacy weak Base Msp DeInit Callback */ - break; - - case HAL_TIM_IC_MSPINIT_CB_ID : - htim->IC_MspInitCallback = HAL_TIM_IC_MspInit; /* Legacy weak IC Msp Init Callback */ - break; - - case HAL_TIM_IC_MSPDEINIT_CB_ID : - htim->IC_MspDeInitCallback = HAL_TIM_IC_MspDeInit; /* Legacy weak IC Msp DeInit Callback */ - break; - - case HAL_TIM_OC_MSPINIT_CB_ID : - htim->OC_MspInitCallback = HAL_TIM_OC_MspInit; /* Legacy weak OC Msp Init Callback */ - break; - - case HAL_TIM_OC_MSPDEINIT_CB_ID : - htim->OC_MspDeInitCallback = HAL_TIM_OC_MspDeInit; /* Legacy weak OC Msp DeInit Callback */ - break; - - case HAL_TIM_PWM_MSPINIT_CB_ID : - htim->PWM_MspInitCallback = HAL_TIM_PWM_MspInit; /* Legacy weak PWM Msp Init Callback */ - break; - - case HAL_TIM_PWM_MSPDEINIT_CB_ID : - htim->PWM_MspDeInitCallback = HAL_TIM_PWM_MspDeInit; /* Legacy weak PWM Msp DeInit Callback */ - break; - - case HAL_TIM_ONE_PULSE_MSPINIT_CB_ID : - htim->OnePulse_MspInitCallback = HAL_TIM_OnePulse_MspInit; /* Legacy weak One Pulse Msp Init Callback */ - break; - - case HAL_TIM_ONE_PULSE_MSPDEINIT_CB_ID : - htim->OnePulse_MspDeInitCallback = HAL_TIM_OnePulse_MspDeInit; /* Legacy weak One Pulse Msp DeInit Callback */ - break; - - case HAL_TIM_ENCODER_MSPINIT_CB_ID : - htim->Encoder_MspInitCallback = HAL_TIM_Encoder_MspInit; /* Legacy weak Encoder Msp Init Callback */ - break; - - case HAL_TIM_ENCODER_MSPDEINIT_CB_ID : - htim->Encoder_MspDeInitCallback = HAL_TIM_Encoder_MspDeInit; /* Legacy weak Encoder Msp DeInit Callback */ - break; - - case HAL_TIM_HALL_SENSOR_MSPINIT_CB_ID : - htim->HallSensor_MspInitCallback = HAL_TIMEx_HallSensor_MspInit; /* Legacy weak Hall Sensor Msp Init Callback */ - break; - - case HAL_TIM_HALL_SENSOR_MSPDEINIT_CB_ID : - htim->HallSensor_MspDeInitCallback = HAL_TIMEx_HallSensor_MspDeInit; /* Legacy weak Hall Sensor Msp DeInit Callback */ - break; - - case HAL_TIM_PERIOD_ELAPSED_CB_ID : - htim->PeriodElapsedCallback = HAL_TIM_PeriodElapsedCallback; /* Legacy weak Period Elapsed Callback */ - break; - - case HAL_TIM_PERIOD_ELAPSED_HALF_CB_ID : - htim->PeriodElapsedHalfCpltCallback = HAL_TIM_PeriodElapsedHalfCpltCallback; /* Legacy weak Period Elapsed half complete Callback */ - break; - - case HAL_TIM_TRIGGER_CB_ID : - htim->TriggerCallback = HAL_TIM_TriggerCallback; /* Legacy weak Trigger Callback */ - break; - - case HAL_TIM_TRIGGER_HALF_CB_ID : - htim->TriggerHalfCpltCallback = HAL_TIM_TriggerHalfCpltCallback; /* Legacy weak Trigger half complete Callback */ - break; - - case HAL_TIM_IC_CAPTURE_CB_ID : - htim->IC_CaptureCallback = HAL_TIM_IC_CaptureCallback; /* Legacy weak IC Capture Callback */ - break; - - case HAL_TIM_IC_CAPTURE_HALF_CB_ID : - htim->IC_CaptureHalfCpltCallback = HAL_TIM_IC_CaptureHalfCpltCallback; /* Legacy weak IC Capture half complete Callback */ - break; - - case HAL_TIM_OC_DELAY_ELAPSED_CB_ID : - htim->OC_DelayElapsedCallback = HAL_TIM_OC_DelayElapsedCallback; /* Legacy weak OC Delay Elapsed Callback */ - break; - - case HAL_TIM_PWM_PULSE_FINISHED_CB_ID : - htim->PWM_PulseFinishedCallback = HAL_TIM_PWM_PulseFinishedCallback; /* Legacy weak PWM Pulse Finished Callback */ - break; - - case HAL_TIM_PWM_PULSE_FINISHED_HALF_CB_ID : - htim->PWM_PulseFinishedHalfCpltCallback = HAL_TIM_PWM_PulseFinishedHalfCpltCallback; /* Legacy weak PWM Pulse Finished half complete Callback */ - break; - - case HAL_TIM_ERROR_CB_ID : - htim->ErrorCallback = HAL_TIM_ErrorCallback; /* Legacy weak Error Callback */ - break; - - case HAL_TIM_COMMUTATION_CB_ID : - htim->CommutationCallback = HAL_TIMEx_CommutCallback; /* Legacy weak Commutation Callback */ - break; - - case HAL_TIM_COMMUTATION_HALF_CB_ID : - htim->CommutationHalfCpltCallback = HAL_TIMEx_CommutHalfCpltCallback; /* Legacy weak Commutation half complete Callback */ - break; - - case HAL_TIM_BREAK_CB_ID : - htim->BreakCallback = HAL_TIMEx_BreakCallback; /* Legacy weak Break Callback */ - break; - - case HAL_TIM_BREAK2_CB_ID : - htim->Break2Callback = HAL_TIMEx_Break2Callback; /* Legacy weak Break2 Callback */ - break; - - default : - /* Return error status */ - status = HAL_ERROR; - break; - } - } - else if (htim->State == HAL_TIM_STATE_RESET) - { - switch (CallbackID) - { - case HAL_TIM_BASE_MSPINIT_CB_ID : - htim->Base_MspInitCallback = HAL_TIM_Base_MspInit; /* Legacy weak Base MspInit Callback */ - break; - - case HAL_TIM_BASE_MSPDEINIT_CB_ID : - htim->Base_MspDeInitCallback = HAL_TIM_Base_MspDeInit; /* Legacy weak Base Msp DeInit Callback */ - break; - - case HAL_TIM_IC_MSPINIT_CB_ID : - htim->IC_MspInitCallback = HAL_TIM_IC_MspInit; /* Legacy weak IC Msp Init Callback */ - break; - - case HAL_TIM_IC_MSPDEINIT_CB_ID : - htim->IC_MspDeInitCallback = HAL_TIM_IC_MspDeInit; /* Legacy weak IC Msp DeInit Callback */ - break; - - case HAL_TIM_OC_MSPINIT_CB_ID : - htim->OC_MspInitCallback = HAL_TIM_OC_MspInit; /* Legacy weak OC Msp Init Callback */ - break; - - case HAL_TIM_OC_MSPDEINIT_CB_ID : - htim->OC_MspDeInitCallback = HAL_TIM_OC_MspDeInit; /* Legacy weak OC Msp DeInit Callback */ - break; - - case HAL_TIM_PWM_MSPINIT_CB_ID : - htim->PWM_MspInitCallback = HAL_TIM_PWM_MspInit; /* Legacy weak PWM Msp Init Callback */ - break; - - case HAL_TIM_PWM_MSPDEINIT_CB_ID : - htim->PWM_MspDeInitCallback = HAL_TIM_PWM_MspDeInit; /* Legacy weak PWM Msp DeInit Callback */ - break; - - case HAL_TIM_ONE_PULSE_MSPINIT_CB_ID : - htim->OnePulse_MspInitCallback = HAL_TIM_OnePulse_MspInit; /* Legacy weak One Pulse Msp Init Callback */ - break; - - case HAL_TIM_ONE_PULSE_MSPDEINIT_CB_ID : - htim->OnePulse_MspDeInitCallback = HAL_TIM_OnePulse_MspDeInit; /* Legacy weak One Pulse Msp DeInit Callback */ - break; - - case HAL_TIM_ENCODER_MSPINIT_CB_ID : - htim->Encoder_MspInitCallback = HAL_TIM_Encoder_MspInit; /* Legacy weak Encoder Msp Init Callback */ - break; - - case HAL_TIM_ENCODER_MSPDEINIT_CB_ID : - htim->Encoder_MspDeInitCallback = HAL_TIM_Encoder_MspDeInit; /* Legacy weak Encoder Msp DeInit Callback */ - break; - - case HAL_TIM_HALL_SENSOR_MSPINIT_CB_ID : - htim->HallSensor_MspInitCallback = HAL_TIMEx_HallSensor_MspInit; /* Legacy weak Hall Sensor Msp Init Callback */ - break; - - case HAL_TIM_HALL_SENSOR_MSPDEINIT_CB_ID : - htim->HallSensor_MspDeInitCallback = HAL_TIMEx_HallSensor_MspDeInit; /* Legacy weak Hall Sensor Msp DeInit Callback */ - break; - - default : - /* Return error status */ - status = HAL_ERROR; - break; - } - } - else - { - /* Return error status */ - status = HAL_ERROR; - } - - /* Release Lock */ - __HAL_UNLOCK(htim); - - return status; -} -#endif /* USE_HAL_TIM_REGISTER_CALLBACKS */ - -/** - * @} - */ - -/** @defgroup TIM_Exported_Functions_Group10 TIM Peripheral State functions - * @brief TIM Peripheral State functions - * -@verbatim - ============================================================================== - ##### Peripheral State functions ##### - ============================================================================== - [..] - This subsection permits to get in run-time the status of the peripheral - and the data flow. - -@endverbatim - * @{ - */ - -/** - * @brief Return the TIM Base handle state. - * @param htim TIM Base handle - * @retval HAL state - */ -HAL_TIM_StateTypeDef HAL_TIM_Base_GetState(TIM_HandleTypeDef *htim) -{ - return htim->State; -} - -/** - * @brief Return the TIM OC handle state. - * @param htim TIM Output Compare handle - * @retval HAL state - */ -HAL_TIM_StateTypeDef HAL_TIM_OC_GetState(TIM_HandleTypeDef *htim) -{ - return htim->State; -} - -/** - * @brief Return the TIM PWM handle state. - * @param htim TIM handle - * @retval HAL state - */ -HAL_TIM_StateTypeDef HAL_TIM_PWM_GetState(TIM_HandleTypeDef *htim) -{ - return htim->State; -} - -/** - * @brief Return the TIM Input Capture handle state. - * @param htim TIM IC handle - * @retval HAL state - */ -HAL_TIM_StateTypeDef HAL_TIM_IC_GetState(TIM_HandleTypeDef *htim) -{ - return htim->State; -} - -/** - * @brief Return the TIM One Pulse Mode handle state. - * @param htim TIM OPM handle - * @retval HAL state - */ -HAL_TIM_StateTypeDef HAL_TIM_OnePulse_GetState(TIM_HandleTypeDef *htim) -{ - return htim->State; -} - -/** - * @brief Return the TIM Encoder Mode handle state. - * @param htim TIM Encoder Interface handle - * @retval HAL state - */ -HAL_TIM_StateTypeDef HAL_TIM_Encoder_GetState(TIM_HandleTypeDef *htim) -{ - return htim->State; -} - -/** - * @} - */ - -/** - * @} - */ - -/** @defgroup TIM_Private_Functions TIM Private Functions - * @{ - */ - -/** - * @brief TIM DMA error callback - * @param hdma pointer to DMA handle. - * @retval None - */ -void TIM_DMAError(DMA_HandleTypeDef *hdma) -{ - TIM_HandleTypeDef *htim = (TIM_HandleTypeDef *)((DMA_HandleTypeDef *)hdma)->Parent; - - htim->State = HAL_TIM_STATE_READY; - -#if (USE_HAL_TIM_REGISTER_CALLBACKS == 1) - htim->ErrorCallback(htim); -#else - HAL_TIM_ErrorCallback(htim); -#endif /* USE_HAL_TIM_REGISTER_CALLBACKS */ -} - -/** - * @brief TIM DMA Delay Pulse complete callback. - * @param hdma pointer to DMA handle. - * @retval None - */ -void TIM_DMADelayPulseCplt(DMA_HandleTypeDef *hdma) -{ - TIM_HandleTypeDef *htim = (TIM_HandleTypeDef *)((DMA_HandleTypeDef *)hdma)->Parent; - - htim->State = HAL_TIM_STATE_READY; - - if (hdma == htim->hdma[TIM_DMA_ID_CC1]) - { - htim->Channel = HAL_TIM_ACTIVE_CHANNEL_1; - } - else if (hdma == htim->hdma[TIM_DMA_ID_CC2]) - { - htim->Channel = HAL_TIM_ACTIVE_CHANNEL_2; - } - else if (hdma == htim->hdma[TIM_DMA_ID_CC3]) - { - htim->Channel = HAL_TIM_ACTIVE_CHANNEL_3; - } - else if (hdma == htim->hdma[TIM_DMA_ID_CC4]) - { - htim->Channel = HAL_TIM_ACTIVE_CHANNEL_4; - } - else - { - /* nothing to do */ - } - -#if (USE_HAL_TIM_REGISTER_CALLBACKS == 1) - htim->PWM_PulseFinishedCallback(htim); -#else - HAL_TIM_PWM_PulseFinishedCallback(htim); -#endif /* USE_HAL_TIM_REGISTER_CALLBACKS */ - - htim->Channel = HAL_TIM_ACTIVE_CHANNEL_CLEARED; -} - -/** - * @brief TIM DMA Delay Pulse half complete callback. - * @param hdma pointer to DMA handle. - * @retval None - */ -void TIM_DMADelayPulseHalfCplt(DMA_HandleTypeDef *hdma) -{ - TIM_HandleTypeDef *htim = (TIM_HandleTypeDef *)((DMA_HandleTypeDef *)hdma)->Parent; - - htim->State = HAL_TIM_STATE_READY; - - if (hdma == htim->hdma[TIM_DMA_ID_CC1]) - { - htim->Channel = HAL_TIM_ACTIVE_CHANNEL_1; - } - else if (hdma == htim->hdma[TIM_DMA_ID_CC2]) - { - htim->Channel = HAL_TIM_ACTIVE_CHANNEL_2; - } - else if (hdma == htim->hdma[TIM_DMA_ID_CC3]) - { - htim->Channel = HAL_TIM_ACTIVE_CHANNEL_3; - } - else if (hdma == htim->hdma[TIM_DMA_ID_CC4]) - { - htim->Channel = HAL_TIM_ACTIVE_CHANNEL_4; - } - else - { - /* nothing to do */ - } - -#if (USE_HAL_TIM_REGISTER_CALLBACKS == 1) - htim->PWM_PulseFinishedHalfCpltCallback(htim); -#else - HAL_TIM_PWM_PulseFinishedHalfCpltCallback(htim); -#endif /* USE_HAL_TIM_REGISTER_CALLBACKS */ - - htim->Channel = HAL_TIM_ACTIVE_CHANNEL_CLEARED; -} - -/** - * @brief TIM DMA Capture complete callback. - * @param hdma pointer to DMA handle. - * @retval None - */ -void TIM_DMACaptureCplt(DMA_HandleTypeDef *hdma) -{ - TIM_HandleTypeDef *htim = (TIM_HandleTypeDef *)((DMA_HandleTypeDef *)hdma)->Parent; - - htim->State = HAL_TIM_STATE_READY; - - if (hdma == htim->hdma[TIM_DMA_ID_CC1]) - { - htim->Channel = HAL_TIM_ACTIVE_CHANNEL_1; - } - else if (hdma == htim->hdma[TIM_DMA_ID_CC2]) - { - htim->Channel = HAL_TIM_ACTIVE_CHANNEL_2; - } - else if (hdma == htim->hdma[TIM_DMA_ID_CC3]) - { - htim->Channel = HAL_TIM_ACTIVE_CHANNEL_3; - } - else if (hdma == htim->hdma[TIM_DMA_ID_CC4]) - { - htim->Channel = HAL_TIM_ACTIVE_CHANNEL_4; - } - else - { - /* nothing to do */ - } - -#if (USE_HAL_TIM_REGISTER_CALLBACKS == 1) - htim->IC_CaptureCallback(htim); -#else - HAL_TIM_IC_CaptureCallback(htim); -#endif /* USE_HAL_TIM_REGISTER_CALLBACKS */ - - htim->Channel = HAL_TIM_ACTIVE_CHANNEL_CLEARED; -} - -/** - * @brief TIM DMA Capture half complete callback. - * @param hdma pointer to DMA handle. - * @retval None - */ -void TIM_DMACaptureHalfCplt(DMA_HandleTypeDef *hdma) -{ - TIM_HandleTypeDef *htim = (TIM_HandleTypeDef *)((DMA_HandleTypeDef *)hdma)->Parent; - - htim->State = HAL_TIM_STATE_READY; - - if (hdma == htim->hdma[TIM_DMA_ID_CC1]) - { - htim->Channel = HAL_TIM_ACTIVE_CHANNEL_1; - } - else if (hdma == htim->hdma[TIM_DMA_ID_CC2]) - { - htim->Channel = HAL_TIM_ACTIVE_CHANNEL_2; - } - else if (hdma == htim->hdma[TIM_DMA_ID_CC3]) - { - htim->Channel = HAL_TIM_ACTIVE_CHANNEL_3; - } - else if (hdma == htim->hdma[TIM_DMA_ID_CC4]) - { - htim->Channel = HAL_TIM_ACTIVE_CHANNEL_4; - } - else - { - /* nothing to do */ - } - -#if (USE_HAL_TIM_REGISTER_CALLBACKS == 1) - htim->IC_CaptureHalfCpltCallback(htim); -#else - HAL_TIM_IC_CaptureHalfCpltCallback(htim); -#endif /* USE_HAL_TIM_REGISTER_CALLBACKS */ - - htim->Channel = HAL_TIM_ACTIVE_CHANNEL_CLEARED; -} - -/** - * @brief TIM DMA Period Elapse complete callback. - * @param hdma pointer to DMA handle. - * @retval None - */ -static void TIM_DMAPeriodElapsedCplt(DMA_HandleTypeDef *hdma) -{ - TIM_HandleTypeDef *htim = (TIM_HandleTypeDef *)((DMA_HandleTypeDef *)hdma)->Parent; - - htim->State = HAL_TIM_STATE_READY; - -#if (USE_HAL_TIM_REGISTER_CALLBACKS == 1) - htim->PeriodElapsedCallback(htim); -#else - HAL_TIM_PeriodElapsedCallback(htim); -#endif /* USE_HAL_TIM_REGISTER_CALLBACKS */ -} - -/** - * @brief TIM DMA Period Elapse half complete callback. - * @param hdma pointer to DMA handle. - * @retval None - */ -static void TIM_DMAPeriodElapsedHalfCplt(DMA_HandleTypeDef *hdma) -{ - TIM_HandleTypeDef *htim = (TIM_HandleTypeDef *)((DMA_HandleTypeDef *)hdma)->Parent; - - htim->State = HAL_TIM_STATE_READY; - -#if (USE_HAL_TIM_REGISTER_CALLBACKS == 1) - htim->PeriodElapsedHalfCpltCallback(htim); -#else - HAL_TIM_PeriodElapsedHalfCpltCallback(htim); -#endif /* USE_HAL_TIM_REGISTER_CALLBACKS */ -} - -/** - * @brief TIM DMA Trigger callback. - * @param hdma pointer to DMA handle. - * @retval None - */ -static void TIM_DMATriggerCplt(DMA_HandleTypeDef *hdma) -{ - TIM_HandleTypeDef *htim = (TIM_HandleTypeDef *)((DMA_HandleTypeDef *)hdma)->Parent; - - htim->State = HAL_TIM_STATE_READY; - -#if (USE_HAL_TIM_REGISTER_CALLBACKS == 1) - htim->TriggerCallback(htim); -#else - HAL_TIM_TriggerCallback(htim); -#endif /* USE_HAL_TIM_REGISTER_CALLBACKS */ -} - -/** - * @brief TIM DMA Trigger half complete callback. - * @param hdma pointer to DMA handle. - * @retval None - */ -static void TIM_DMATriggerHalfCplt(DMA_HandleTypeDef *hdma) -{ - TIM_HandleTypeDef *htim = (TIM_HandleTypeDef *)((DMA_HandleTypeDef *)hdma)->Parent; - - htim->State = HAL_TIM_STATE_READY; - -#if (USE_HAL_TIM_REGISTER_CALLBACKS == 1) - htim->TriggerHalfCpltCallback(htim); -#else - HAL_TIM_TriggerHalfCpltCallback(htim); -#endif /* USE_HAL_TIM_REGISTER_CALLBACKS */ -} - -/** - * @brief Time Base configuration - * @param TIMx TIM peripheral - * @param Structure TIM Base configuration structure - * @retval None - */ -void TIM_Base_SetConfig(TIM_TypeDef *TIMx, TIM_Base_InitTypeDef *Structure) -{ - uint32_t tmpcr1; - tmpcr1 = TIMx->CR1; - - /* Set TIM Time Base Unit parameters ---------------------------------------*/ - if (IS_TIM_COUNTER_MODE_SELECT_INSTANCE(TIMx)) - { - /* Select the Counter Mode */ - tmpcr1 &= ~(TIM_CR1_DIR | TIM_CR1_CMS); - tmpcr1 |= Structure->CounterMode; - } - - if (IS_TIM_CLOCK_DIVISION_INSTANCE(TIMx)) - { - /* Set the clock division */ - tmpcr1 &= ~TIM_CR1_CKD; - tmpcr1 |= (uint32_t)Structure->ClockDivision; - } - - /* Set the auto-reload preload */ - MODIFY_REG(tmpcr1, TIM_CR1_ARPE, Structure->AutoReloadPreload); - - TIMx->CR1 = tmpcr1; - - /* Set the Autoreload value */ - TIMx->ARR = (uint32_t)Structure->Period ; - - /* Set the Prescaler value */ - TIMx->PSC = Structure->Prescaler; - - if (IS_TIM_REPETITION_COUNTER_INSTANCE(TIMx)) - { - /* Set the Repetition Counter value */ - TIMx->RCR = Structure->RepetitionCounter; - } - - /* Generate an update event to reload the Prescaler - and the repetition counter (only for advanced timer) value immediately */ - TIMx->EGR = TIM_EGR_UG; -} - -/** - * @brief Timer Output Compare 1 configuration - * @param TIMx to select the TIM peripheral - * @param OC_Config The ouput configuration structure - * @retval None - */ -static void TIM_OC1_SetConfig(TIM_TypeDef *TIMx, TIM_OC_InitTypeDef *OC_Config) -{ - uint32_t tmpccmrx; - uint32_t tmpccer; - uint32_t tmpcr2; - - /* Disable the Channel 1: Reset the CC1E Bit */ - TIMx->CCER &= ~TIM_CCER_CC1E; - - /* Get the TIMx CCER register value */ - tmpccer = TIMx->CCER; - /* Get the TIMx CR2 register value */ - tmpcr2 = TIMx->CR2; - - /* Get the TIMx CCMR1 register value */ - tmpccmrx = TIMx->CCMR1; - - /* Reset the Output Compare Mode Bits */ - tmpccmrx &= ~TIM_CCMR1_OC1M; - tmpccmrx &= ~TIM_CCMR1_CC1S; - /* Select the Output Compare Mode */ - tmpccmrx |= OC_Config->OCMode; - - /* Reset the Output Polarity level */ - tmpccer &= ~TIM_CCER_CC1P; - /* Set the Output Compare Polarity */ - tmpccer |= OC_Config->OCPolarity; - - if (IS_TIM_CCXN_INSTANCE(TIMx, TIM_CHANNEL_1)) - { - /* Check parameters */ - assert_param(IS_TIM_OCN_POLARITY(OC_Config->OCNPolarity)); - - /* Reset the Output N Polarity level */ - tmpccer &= ~TIM_CCER_CC1NP; - /* Set the Output N Polarity */ - tmpccer |= OC_Config->OCNPolarity; - /* Reset the Output N State */ - tmpccer &= ~TIM_CCER_CC1NE; - } - - if (IS_TIM_BREAK_INSTANCE(TIMx)) - { - /* Check parameters */ - assert_param(IS_TIM_OCNIDLE_STATE(OC_Config->OCNIdleState)); - assert_param(IS_TIM_OCIDLE_STATE(OC_Config->OCIdleState)); - - /* Reset the Output Compare and Output Compare N IDLE State */ - tmpcr2 &= ~TIM_CR2_OIS1; - tmpcr2 &= ~TIM_CR2_OIS1N; - /* Set the Output Idle state */ - tmpcr2 |= OC_Config->OCIdleState; - /* Set the Output N Idle state */ - tmpcr2 |= OC_Config->OCNIdleState; - } - - /* Write to TIMx CR2 */ - TIMx->CR2 = tmpcr2; - - /* Write to TIMx CCMR1 */ - TIMx->CCMR1 = tmpccmrx; - - /* Set the Capture Compare Register value */ - TIMx->CCR1 = OC_Config->Pulse; - - /* Write to TIMx CCER */ - TIMx->CCER = tmpccer; -} - -/** - * @brief Timer Output Compare 2 configuration - * @param TIMx to select the TIM peripheral - * @param OC_Config The ouput configuration structure - * @retval None - */ -void TIM_OC2_SetConfig(TIM_TypeDef *TIMx, TIM_OC_InitTypeDef *OC_Config) -{ - uint32_t tmpccmrx; - uint32_t tmpccer; - uint32_t tmpcr2; - - /* Disable the Channel 2: Reset the CC2E Bit */ - TIMx->CCER &= ~TIM_CCER_CC2E; - - /* Get the TIMx CCER register value */ - tmpccer = TIMx->CCER; - /* Get the TIMx CR2 register value */ - tmpcr2 = TIMx->CR2; - - /* Get the TIMx CCMR1 register value */ - tmpccmrx = TIMx->CCMR1; - - /* Reset the Output Compare mode and Capture/Compare selection Bits */ - tmpccmrx &= ~TIM_CCMR1_OC2M; - tmpccmrx &= ~TIM_CCMR1_CC2S; - - /* Select the Output Compare Mode */ - tmpccmrx |= (OC_Config->OCMode << 8U); - - /* Reset the Output Polarity level */ - tmpccer &= ~TIM_CCER_CC2P; - /* Set the Output Compare Polarity */ - tmpccer |= (OC_Config->OCPolarity << 4U); - - if (IS_TIM_CCXN_INSTANCE(TIMx, TIM_CHANNEL_2)) - { - assert_param(IS_TIM_OCN_POLARITY(OC_Config->OCNPolarity)); - - /* Reset the Output N Polarity level */ - tmpccer &= ~TIM_CCER_CC2NP; - /* Set the Output N Polarity */ - tmpccer |= (OC_Config->OCNPolarity << 4U); - /* Reset the Output N State */ - tmpccer &= ~TIM_CCER_CC2NE; - - } - - if (IS_TIM_BREAK_INSTANCE(TIMx)) - { - /* Check parameters */ - assert_param(IS_TIM_OCNIDLE_STATE(OC_Config->OCNIdleState)); - assert_param(IS_TIM_OCIDLE_STATE(OC_Config->OCIdleState)); - - /* Reset the Output Compare and Output Compare N IDLE State */ - tmpcr2 &= ~TIM_CR2_OIS2; - tmpcr2 &= ~TIM_CR2_OIS2N; - /* Set the Output Idle state */ - tmpcr2 |= (OC_Config->OCIdleState << 2U); - /* Set the Output N Idle state */ - tmpcr2 |= (OC_Config->OCNIdleState << 2U); - } - - /* Write to TIMx CR2 */ - TIMx->CR2 = tmpcr2; - - /* Write to TIMx CCMR1 */ - TIMx->CCMR1 = tmpccmrx; - - /* Set the Capture Compare Register value */ - TIMx->CCR2 = OC_Config->Pulse; - - /* Write to TIMx CCER */ - TIMx->CCER = tmpccer; -} - -/** - * @brief Timer Output Compare 3 configuration - * @param TIMx to select the TIM peripheral - * @param OC_Config The ouput configuration structure - * @retval None - */ -static void TIM_OC3_SetConfig(TIM_TypeDef *TIMx, TIM_OC_InitTypeDef *OC_Config) -{ - uint32_t tmpccmrx; - uint32_t tmpccer; - uint32_t tmpcr2; - - /* Disable the Channel 3: Reset the CC2E Bit */ - TIMx->CCER &= ~TIM_CCER_CC3E; - - /* Get the TIMx CCER register value */ - tmpccer = TIMx->CCER; - /* Get the TIMx CR2 register value */ - tmpcr2 = TIMx->CR2; - - /* Get the TIMx CCMR2 register value */ - tmpccmrx = TIMx->CCMR2; - - /* Reset the Output Compare mode and Capture/Compare selection Bits */ - tmpccmrx &= ~TIM_CCMR2_OC3M; - tmpccmrx &= ~TIM_CCMR2_CC3S; - /* Select the Output Compare Mode */ - tmpccmrx |= OC_Config->OCMode; - - /* Reset the Output Polarity level */ - tmpccer &= ~TIM_CCER_CC3P; - /* Set the Output Compare Polarity */ - tmpccer |= (OC_Config->OCPolarity << 8U); - - if (IS_TIM_CCXN_INSTANCE(TIMx, TIM_CHANNEL_3)) - { - assert_param(IS_TIM_OCN_POLARITY(OC_Config->OCNPolarity)); - - /* Reset the Output N Polarity level */ - tmpccer &= ~TIM_CCER_CC3NP; - /* Set the Output N Polarity */ - tmpccer |= (OC_Config->OCNPolarity << 8U); - /* Reset the Output N State */ - tmpccer &= ~TIM_CCER_CC3NE; - } - - if (IS_TIM_BREAK_INSTANCE(TIMx)) - { - /* Check parameters */ - assert_param(IS_TIM_OCNIDLE_STATE(OC_Config->OCNIdleState)); - assert_param(IS_TIM_OCIDLE_STATE(OC_Config->OCIdleState)); - - /* Reset the Output Compare and Output Compare N IDLE State */ - tmpcr2 &= ~TIM_CR2_OIS3; - tmpcr2 &= ~TIM_CR2_OIS3N; - /* Set the Output Idle state */ - tmpcr2 |= (OC_Config->OCIdleState << 4U); - /* Set the Output N Idle state */ - tmpcr2 |= (OC_Config->OCNIdleState << 4U); - } - - /* Write to TIMx CR2 */ - TIMx->CR2 = tmpcr2; - - /* Write to TIMx CCMR2 */ - TIMx->CCMR2 = tmpccmrx; - - /* Set the Capture Compare Register value */ - TIMx->CCR3 = OC_Config->Pulse; - - /* Write to TIMx CCER */ - TIMx->CCER = tmpccer; -} - -/** - * @brief Timer Output Compare 4 configuration - * @param TIMx to select the TIM peripheral - * @param OC_Config The ouput configuration structure - * @retval None - */ -static void TIM_OC4_SetConfig(TIM_TypeDef *TIMx, TIM_OC_InitTypeDef *OC_Config) -{ - uint32_t tmpccmrx; - uint32_t tmpccer; - uint32_t tmpcr2; - - /* Disable the Channel 4: Reset the CC4E Bit */ - TIMx->CCER &= ~TIM_CCER_CC4E; - - /* Get the TIMx CCER register value */ - tmpccer = TIMx->CCER; - /* Get the TIMx CR2 register value */ - tmpcr2 = TIMx->CR2; - - /* Get the TIMx CCMR2 register value */ - tmpccmrx = TIMx->CCMR2; - - /* Reset the Output Compare mode and Capture/Compare selection Bits */ - tmpccmrx &= ~TIM_CCMR2_OC4M; - tmpccmrx &= ~TIM_CCMR2_CC4S; - - /* Select the Output Compare Mode */ - tmpccmrx |= (OC_Config->OCMode << 8U); - - /* Reset the Output Polarity level */ - tmpccer &= ~TIM_CCER_CC4P; - /* Set the Output Compare Polarity */ - tmpccer |= (OC_Config->OCPolarity << 12U); - - if (IS_TIM_BREAK_INSTANCE(TIMx)) - { - /* Check parameters */ - assert_param(IS_TIM_OCIDLE_STATE(OC_Config->OCIdleState)); - - /* Reset the Output Compare IDLE State */ - tmpcr2 &= ~TIM_CR2_OIS4; - - /* Set the Output Idle state */ - tmpcr2 |= (OC_Config->OCIdleState << 6U); - } - - /* Write to TIMx CR2 */ - TIMx->CR2 = tmpcr2; - - /* Write to TIMx CCMR2 */ - TIMx->CCMR2 = tmpccmrx; - - /* Set the Capture Compare Register value */ - TIMx->CCR4 = OC_Config->Pulse; - - /* Write to TIMx CCER */ - TIMx->CCER = tmpccer; -} - -/** - * @brief Timer Output Compare 5 configuration - * @param TIMx to select the TIM peripheral - * @param OC_Config The ouput configuration structure - * @retval None - */ -static void TIM_OC5_SetConfig(TIM_TypeDef *TIMx, - TIM_OC_InitTypeDef *OC_Config) -{ - uint32_t tmpccmrx; - uint32_t tmpccer; - uint32_t tmpcr2; - - /* Disable the output: Reset the CCxE Bit */ - TIMx->CCER &= ~TIM_CCER_CC5E; - - /* Get the TIMx CCER register value */ - tmpccer = TIMx->CCER; - /* Get the TIMx CR2 register value */ - tmpcr2 = TIMx->CR2; - /* Get the TIMx CCMR1 register value */ - tmpccmrx = TIMx->CCMR3; - - /* Reset the Output Compare Mode Bits */ - tmpccmrx &= ~(TIM_CCMR3_OC5M); - /* Select the Output Compare Mode */ - tmpccmrx |= OC_Config->OCMode; - - /* Reset the Output Polarity level */ - tmpccer &= ~TIM_CCER_CC5P; - /* Set the Output Compare Polarity */ - tmpccer |= (OC_Config->OCPolarity << 16U); - - if (IS_TIM_BREAK_INSTANCE(TIMx)) - { - /* Reset the Output Compare IDLE State */ - tmpcr2 &= ~TIM_CR2_OIS5; - /* Set the Output Idle state */ - tmpcr2 |= (OC_Config->OCIdleState << 8U); - } - /* Write to TIMx CR2 */ - TIMx->CR2 = tmpcr2; - - /* Write to TIMx CCMR3 */ - TIMx->CCMR3 = tmpccmrx; - - /* Set the Capture Compare Register value */ - TIMx->CCR5 = OC_Config->Pulse; - - /* Write to TIMx CCER */ - TIMx->CCER = tmpccer; -} - -/** - * @brief Timer Output Compare 6 configuration - * @param TIMx to select the TIM peripheral - * @param OC_Config The ouput configuration structure - * @retval None - */ -static void TIM_OC6_SetConfig(TIM_TypeDef *TIMx, - TIM_OC_InitTypeDef *OC_Config) -{ - uint32_t tmpccmrx; - uint32_t tmpccer; - uint32_t tmpcr2; - - /* Disable the output: Reset the CCxE Bit */ - TIMx->CCER &= ~TIM_CCER_CC6E; - - /* Get the TIMx CCER register value */ - tmpccer = TIMx->CCER; - /* Get the TIMx CR2 register value */ - tmpcr2 = TIMx->CR2; - /* Get the TIMx CCMR1 register value */ - tmpccmrx = TIMx->CCMR3; - - /* Reset the Output Compare Mode Bits */ - tmpccmrx &= ~(TIM_CCMR3_OC6M); - /* Select the Output Compare Mode */ - tmpccmrx |= (OC_Config->OCMode << 8U); - - /* Reset the Output Polarity level */ - tmpccer &= (uint32_t)~TIM_CCER_CC6P; - /* Set the Output Compare Polarity */ - tmpccer |= (OC_Config->OCPolarity << 20U); - - if (IS_TIM_BREAK_INSTANCE(TIMx)) - { - /* Reset the Output Compare IDLE State */ - tmpcr2 &= ~TIM_CR2_OIS6; - /* Set the Output Idle state */ - tmpcr2 |= (OC_Config->OCIdleState << 10U); - } - - /* Write to TIMx CR2 */ - TIMx->CR2 = tmpcr2; - - /* Write to TIMx CCMR3 */ - TIMx->CCMR3 = tmpccmrx; - - /* Set the Capture Compare Register value */ - TIMx->CCR6 = OC_Config->Pulse; - - /* Write to TIMx CCER */ - TIMx->CCER = tmpccer; -} - -/** - * @brief Slave Timer configuration function - * @param htim TIM handle - * @param sSlaveConfig Slave timer configuration - * @retval None - */ -static HAL_StatusTypeDef TIM_SlaveTimer_SetConfig(TIM_HandleTypeDef *htim, - TIM_SlaveConfigTypeDef *sSlaveConfig) -{ - uint32_t tmpsmcr; - uint32_t tmpccmr1; - uint32_t tmpccer; - - /* Get the TIMx SMCR register value */ - tmpsmcr = htim->Instance->SMCR; - - /* Reset the Trigger Selection Bits */ - tmpsmcr &= ~TIM_SMCR_TS; - /* Set the Input Trigger source */ - tmpsmcr |= sSlaveConfig->InputTrigger; - - /* Reset the slave mode Bits */ - tmpsmcr &= ~TIM_SMCR_SMS; - /* Set the slave mode */ - tmpsmcr |= sSlaveConfig->SlaveMode; - - /* Write to TIMx SMCR */ - htim->Instance->SMCR = tmpsmcr; - - /* Configure the trigger prescaler, filter, and polarity */ - switch (sSlaveConfig->InputTrigger) - { - case TIM_TS_ETRF: - { - /* Check the parameters */ - assert_param(IS_TIM_CLOCKSOURCE_ETRMODE1_INSTANCE(htim->Instance)); - assert_param(IS_TIM_TRIGGERPRESCALER(sSlaveConfig->TriggerPrescaler)); - assert_param(IS_TIM_TRIGGERPOLARITY(sSlaveConfig->TriggerPolarity)); - assert_param(IS_TIM_TRIGGERFILTER(sSlaveConfig->TriggerFilter)); - /* Configure the ETR Trigger source */ - TIM_ETR_SetConfig(htim->Instance, - sSlaveConfig->TriggerPrescaler, - sSlaveConfig->TriggerPolarity, - sSlaveConfig->TriggerFilter); - break; - } - - case TIM_TS_TI1F_ED: - { - /* Check the parameters */ - assert_param(IS_TIM_CC1_INSTANCE(htim->Instance)); - assert_param(IS_TIM_TRIGGERFILTER(sSlaveConfig->TriggerFilter)); - - if(sSlaveConfig->SlaveMode == TIM_SLAVEMODE_GATED) - { - return HAL_ERROR; - } - - /* Disable the Channel 1: Reset the CC1E Bit */ - tmpccer = htim->Instance->CCER; - htim->Instance->CCER &= ~TIM_CCER_CC1E; - tmpccmr1 = htim->Instance->CCMR1; - - /* Set the filter */ - tmpccmr1 &= ~TIM_CCMR1_IC1F; - tmpccmr1 |= ((sSlaveConfig->TriggerFilter) << 4U); - - /* Write to TIMx CCMR1 and CCER registers */ - htim->Instance->CCMR1 = tmpccmr1; - htim->Instance->CCER = tmpccer; - break; - } - - case TIM_TS_TI1FP1: - { - /* Check the parameters */ - assert_param(IS_TIM_CC1_INSTANCE(htim->Instance)); - assert_param(IS_TIM_TRIGGERPOLARITY(sSlaveConfig->TriggerPolarity)); - assert_param(IS_TIM_TRIGGERFILTER(sSlaveConfig->TriggerFilter)); - - /* Configure TI1 Filter and Polarity */ - TIM_TI1_ConfigInputStage(htim->Instance, - sSlaveConfig->TriggerPolarity, - sSlaveConfig->TriggerFilter); - break; - } - - case TIM_TS_TI2FP2: - { - /* Check the parameters */ - assert_param(IS_TIM_CC2_INSTANCE(htim->Instance)); - assert_param(IS_TIM_TRIGGERPOLARITY(sSlaveConfig->TriggerPolarity)); - assert_param(IS_TIM_TRIGGERFILTER(sSlaveConfig->TriggerFilter)); - - /* Configure TI2 Filter and Polarity */ - TIM_TI2_ConfigInputStage(htim->Instance, - sSlaveConfig->TriggerPolarity, - sSlaveConfig->TriggerFilter); - break; - } - - case TIM_TS_ITR0: - case TIM_TS_ITR1: - case TIM_TS_ITR2: - case TIM_TS_ITR3: - { - /* Check the parameter */ - assert_param(IS_TIM_CC2_INSTANCE(htim->Instance)); - break; - } - - default: - break; - } - return HAL_OK; -} - -/** - * @brief Configure the TI1 as Input. - * @param TIMx to select the TIM peripheral. - * @param TIM_ICPolarity The Input Polarity. - * This parameter can be one of the following values: - * @arg TIM_ICPOLARITY_RISING - * @arg TIM_ICPOLARITY_FALLING - * @arg TIM_ICPOLARITY_BOTHEDGE - * @param TIM_ICSelection specifies the input to be used. - * This parameter can be one of the following values: - * @arg TIM_ICSELECTION_DIRECTTI: TIM Input 1 is selected to be connected to IC1. - * @arg TIM_ICSELECTION_INDIRECTTI: TIM Input 1 is selected to be connected to IC2. - * @arg TIM_ICSELECTION_TRC: TIM Input 1 is selected to be connected to TRC. - * @param TIM_ICFilter Specifies the Input Capture Filter. - * This parameter must be a value between 0x00 and 0x0F. - * @retval None - * @note TIM_ICFilter and TIM_ICPolarity are not used in INDIRECT mode as TI2FP1 - * (on channel2 path) is used as the input signal. Therefore CCMR1 must be - * protected against un-initialized filter and polarity values. - */ -void TIM_TI1_SetConfig(TIM_TypeDef *TIMx, uint32_t TIM_ICPolarity, uint32_t TIM_ICSelection, - uint32_t TIM_ICFilter) -{ - uint32_t tmpccmr1; - uint32_t tmpccer; - - /* Disable the Channel 1: Reset the CC1E Bit */ - TIMx->CCER &= ~TIM_CCER_CC1E; - tmpccmr1 = TIMx->CCMR1; - tmpccer = TIMx->CCER; - - /* Select the Input */ - if (IS_TIM_CC2_INSTANCE(TIMx) != RESET) - { - tmpccmr1 &= ~TIM_CCMR1_CC1S; - tmpccmr1 |= TIM_ICSelection; - } - else - { - tmpccmr1 |= TIM_CCMR1_CC1S_0; - } - - /* Set the filter */ - tmpccmr1 &= ~TIM_CCMR1_IC1F; - tmpccmr1 |= ((TIM_ICFilter << 4U) & TIM_CCMR1_IC1F); - - /* Select the Polarity and set the CC1E Bit */ - tmpccer &= ~(TIM_CCER_CC1P | TIM_CCER_CC1NP); - tmpccer |= (TIM_ICPolarity & (TIM_CCER_CC1P | TIM_CCER_CC1NP)); - - /* Write to TIMx CCMR1 and CCER registers */ - TIMx->CCMR1 = tmpccmr1; - TIMx->CCER = tmpccer; -} - -/** - * @brief Configure the Polarity and Filter for TI1. - * @param TIMx to select the TIM peripheral. - * @param TIM_ICPolarity The Input Polarity. - * This parameter can be one of the following values: - * @arg TIM_ICPOLARITY_RISING - * @arg TIM_ICPOLARITY_FALLING - * @arg TIM_ICPOLARITY_BOTHEDGE - * @param TIM_ICFilter Specifies the Input Capture Filter. - * This parameter must be a value between 0x00 and 0x0F. - * @retval None - */ -static void TIM_TI1_ConfigInputStage(TIM_TypeDef *TIMx, uint32_t TIM_ICPolarity, uint32_t TIM_ICFilter) -{ - uint32_t tmpccmr1; - uint32_t tmpccer; - - /* Disable the Channel 1: Reset the CC1E Bit */ - tmpccer = TIMx->CCER; - TIMx->CCER &= ~TIM_CCER_CC1E; - tmpccmr1 = TIMx->CCMR1; - - /* Set the filter */ - tmpccmr1 &= ~TIM_CCMR1_IC1F; - tmpccmr1 |= (TIM_ICFilter << 4U); - - /* Select the Polarity and set the CC1E Bit */ - tmpccer &= ~(TIM_CCER_CC1P | TIM_CCER_CC1NP); - tmpccer |= TIM_ICPolarity; - - /* Write to TIMx CCMR1 and CCER registers */ - TIMx->CCMR1 = tmpccmr1; - TIMx->CCER = tmpccer; -} - -/** - * @brief Configure the TI2 as Input. - * @param TIMx to select the TIM peripheral - * @param TIM_ICPolarity The Input Polarity. - * This parameter can be one of the following values: - * @arg TIM_ICPOLARITY_RISING - * @arg TIM_ICPOLARITY_FALLING - * @arg TIM_ICPOLARITY_BOTHEDGE - * @param TIM_ICSelection specifies the input to be used. - * This parameter can be one of the following values: - * @arg TIM_ICSELECTION_DIRECTTI: TIM Input 2 is selected to be connected to IC2. - * @arg TIM_ICSELECTION_INDIRECTTI: TIM Input 2 is selected to be connected to IC1. - * @arg TIM_ICSELECTION_TRC: TIM Input 2 is selected to be connected to TRC. - * @param TIM_ICFilter Specifies the Input Capture Filter. - * This parameter must be a value between 0x00 and 0x0F. - * @retval None - * @note TIM_ICFilter and TIM_ICPolarity are not used in INDIRECT mode as TI1FP2 - * (on channel1 path) is used as the input signal. Therefore CCMR1 must be - * protected against un-initialized filter and polarity values. - */ -static void TIM_TI2_SetConfig(TIM_TypeDef *TIMx, uint32_t TIM_ICPolarity, uint32_t TIM_ICSelection, - uint32_t TIM_ICFilter) -{ - uint32_t tmpccmr1; - uint32_t tmpccer; - - /* Disable the Channel 2: Reset the CC2E Bit */ - TIMx->CCER &= ~TIM_CCER_CC2E; - tmpccmr1 = TIMx->CCMR1; - tmpccer = TIMx->CCER; - - /* Select the Input */ - tmpccmr1 &= ~TIM_CCMR1_CC2S; - tmpccmr1 |= (TIM_ICSelection << 8U); - - /* Set the filter */ - tmpccmr1 &= ~TIM_CCMR1_IC2F; - tmpccmr1 |= ((TIM_ICFilter << 12U) & TIM_CCMR1_IC2F); - - /* Select the Polarity and set the CC2E Bit */ - tmpccer &= ~(TIM_CCER_CC2P | TIM_CCER_CC2NP); - tmpccer |= ((TIM_ICPolarity << 4U) & (TIM_CCER_CC2P | TIM_CCER_CC2NP)); - - /* Write to TIMx CCMR1 and CCER registers */ - TIMx->CCMR1 = tmpccmr1 ; - TIMx->CCER = tmpccer; -} - -/** - * @brief Configure the Polarity and Filter for TI2. - * @param TIMx to select the TIM peripheral. - * @param TIM_ICPolarity The Input Polarity. - * This parameter can be one of the following values: - * @arg TIM_ICPOLARITY_RISING - * @arg TIM_ICPOLARITY_FALLING - * @arg TIM_ICPOLARITY_BOTHEDGE - * @param TIM_ICFilter Specifies the Input Capture Filter. - * This parameter must be a value between 0x00 and 0x0F. - * @retval None - */ -static void TIM_TI2_ConfigInputStage(TIM_TypeDef *TIMx, uint32_t TIM_ICPolarity, uint32_t TIM_ICFilter) -{ - uint32_t tmpccmr1; - uint32_t tmpccer; - - /* Disable the Channel 2: Reset the CC2E Bit */ - TIMx->CCER &= ~TIM_CCER_CC2E; - tmpccmr1 = TIMx->CCMR1; - tmpccer = TIMx->CCER; - - /* Set the filter */ - tmpccmr1 &= ~TIM_CCMR1_IC2F; - tmpccmr1 |= (TIM_ICFilter << 12U); - - /* Select the Polarity and set the CC2E Bit */ - tmpccer &= ~(TIM_CCER_CC2P | TIM_CCER_CC2NP); - tmpccer |= (TIM_ICPolarity << 4U); - - /* Write to TIMx CCMR1 and CCER registers */ - TIMx->CCMR1 = tmpccmr1 ; - TIMx->CCER = tmpccer; -} - -/** - * @brief Configure the TI3 as Input. - * @param TIMx to select the TIM peripheral - * @param TIM_ICPolarity The Input Polarity. - * This parameter can be one of the following values: - * @arg TIM_ICPOLARITY_RISING - * @arg TIM_ICPOLARITY_FALLING - * @arg TIM_ICPOLARITY_BOTHEDGE - * @param TIM_ICSelection specifies the input to be used. - * This parameter can be one of the following values: - * @arg TIM_ICSELECTION_DIRECTTI: TIM Input 3 is selected to be connected to IC3. - * @arg TIM_ICSELECTION_INDIRECTTI: TIM Input 3 is selected to be connected to IC4. - * @arg TIM_ICSELECTION_TRC: TIM Input 3 is selected to be connected to TRC. - * @param TIM_ICFilter Specifies the Input Capture Filter. - * This parameter must be a value between 0x00 and 0x0F. - * @retval None - * @note TIM_ICFilter and TIM_ICPolarity are not used in INDIRECT mode as TI3FP4 - * (on channel1 path) is used as the input signal. Therefore CCMR2 must be - * protected against un-initialized filter and polarity values. - */ -static void TIM_TI3_SetConfig(TIM_TypeDef *TIMx, uint32_t TIM_ICPolarity, uint32_t TIM_ICSelection, - uint32_t TIM_ICFilter) -{ - uint32_t tmpccmr2; - uint32_t tmpccer; - - /* Disable the Channel 3: Reset the CC3E Bit */ - TIMx->CCER &= ~TIM_CCER_CC3E; - tmpccmr2 = TIMx->CCMR2; - tmpccer = TIMx->CCER; - - /* Select the Input */ - tmpccmr2 &= ~TIM_CCMR2_CC3S; - tmpccmr2 |= TIM_ICSelection; - - /* Set the filter */ - tmpccmr2 &= ~TIM_CCMR2_IC3F; - tmpccmr2 |= ((TIM_ICFilter << 4U) & TIM_CCMR2_IC3F); - - /* Select the Polarity and set the CC3E Bit */ - tmpccer &= ~(TIM_CCER_CC3P | TIM_CCER_CC3NP); - tmpccer |= ((TIM_ICPolarity << 8U) & (TIM_CCER_CC3P | TIM_CCER_CC3NP)); - - /* Write to TIMx CCMR2 and CCER registers */ - TIMx->CCMR2 = tmpccmr2; - TIMx->CCER = tmpccer; -} - -/** - * @brief Configure the TI4 as Input. - * @param TIMx to select the TIM peripheral - * @param TIM_ICPolarity The Input Polarity. - * This parameter can be one of the following values: - * @arg TIM_ICPOLARITY_RISING - * @arg TIM_ICPOLARITY_FALLING - * @arg TIM_ICPOLARITY_BOTHEDGE - * @param TIM_ICSelection specifies the input to be used. - * This parameter can be one of the following values: - * @arg TIM_ICSELECTION_DIRECTTI: TIM Input 4 is selected to be connected to IC4. - * @arg TIM_ICSELECTION_INDIRECTTI: TIM Input 4 is selected to be connected to IC3. - * @arg TIM_ICSELECTION_TRC: TIM Input 4 is selected to be connected to TRC. - * @param TIM_ICFilter Specifies the Input Capture Filter. - * This parameter must be a value between 0x00 and 0x0F. - * @note TIM_ICFilter and TIM_ICPolarity are not used in INDIRECT mode as TI4FP3 - * (on channel1 path) is used as the input signal. Therefore CCMR2 must be - * protected against un-initialized filter and polarity values. - * @retval None - */ -static void TIM_TI4_SetConfig(TIM_TypeDef *TIMx, uint32_t TIM_ICPolarity, uint32_t TIM_ICSelection, - uint32_t TIM_ICFilter) -{ - uint32_t tmpccmr2; - uint32_t tmpccer; - - /* Disable the Channel 4: Reset the CC4E Bit */ - TIMx->CCER &= ~TIM_CCER_CC4E; - tmpccmr2 = TIMx->CCMR2; - tmpccer = TIMx->CCER; - - /* Select the Input */ - tmpccmr2 &= ~TIM_CCMR2_CC4S; - tmpccmr2 |= (TIM_ICSelection << 8U); - - /* Set the filter */ - tmpccmr2 &= ~TIM_CCMR2_IC4F; - tmpccmr2 |= ((TIM_ICFilter << 12U) & TIM_CCMR2_IC4F); - - /* Select the Polarity and set the CC4E Bit */ - tmpccer &= ~(TIM_CCER_CC4P | TIM_CCER_CC4NP); - tmpccer |= ((TIM_ICPolarity << 12U) & (TIM_CCER_CC4P | TIM_CCER_CC4NP)); - - /* Write to TIMx CCMR2 and CCER registers */ - TIMx->CCMR2 = tmpccmr2; - TIMx->CCER = tmpccer ; -} - -/** - * @brief Selects the Input Trigger source - * @param TIMx to select the TIM peripheral - * @param InputTriggerSource The Input Trigger source. - * This parameter can be one of the following values: - * @arg TIM_TS_ITR0: Internal Trigger 0 - * @arg TIM_TS_ITR1: Internal Trigger 1 - * @arg TIM_TS_ITR2: Internal Trigger 2 - * @arg TIM_TS_ITR3: Internal Trigger 3 - * @arg TIM_TS_TI1F_ED: TI1 Edge Detector - * @arg TIM_TS_TI1FP1: Filtered Timer Input 1 - * @arg TIM_TS_TI2FP2: Filtered Timer Input 2 - * @arg TIM_TS_ETRF: External Trigger input - * @retval None - */ -static void TIM_ITRx_SetConfig(TIM_TypeDef *TIMx, uint32_t InputTriggerSource) -{ - uint32_t tmpsmcr; - - /* Get the TIMx SMCR register value */ - tmpsmcr = TIMx->SMCR; - /* Reset the TS Bits */ - tmpsmcr &= ~TIM_SMCR_TS; - /* Set the Input Trigger source and the slave mode*/ - tmpsmcr |= (InputTriggerSource | TIM_SLAVEMODE_EXTERNAL1); - /* Write to TIMx SMCR */ - TIMx->SMCR = tmpsmcr; -} -/** - * @brief Configures the TIMx External Trigger (ETR). - * @param TIMx to select the TIM peripheral - * @param TIM_ExtTRGPrescaler The external Trigger Prescaler. - * This parameter can be one of the following values: - * @arg TIM_ETRPRESCALER_DIV1: ETRP Prescaler OFF. - * @arg TIM_ETRPRESCALER_DIV2: ETRP frequency divided by 2. - * @arg TIM_ETRPRESCALER_DIV4: ETRP frequency divided by 4. - * @arg TIM_ETRPRESCALER_DIV8: ETRP frequency divided by 8. - * @param TIM_ExtTRGPolarity The external Trigger Polarity. - * This parameter can be one of the following values: - * @arg TIM_ETRPOLARITY_INVERTED: active low or falling edge active. - * @arg TIM_ETRPOLARITY_NONINVERTED: active high or rising edge active. - * @param ExtTRGFilter External Trigger Filter. - * This parameter must be a value between 0x00 and 0x0F - * @retval None - */ -void TIM_ETR_SetConfig(TIM_TypeDef *TIMx, uint32_t TIM_ExtTRGPrescaler, - uint32_t TIM_ExtTRGPolarity, uint32_t ExtTRGFilter) -{ - uint32_t tmpsmcr; - - tmpsmcr = TIMx->SMCR; - - /* Reset the ETR Bits */ - tmpsmcr &= ~(TIM_SMCR_ETF | TIM_SMCR_ETPS | TIM_SMCR_ECE | TIM_SMCR_ETP); - - /* Set the Prescaler, the Filter value and the Polarity */ - tmpsmcr |= (uint32_t)(TIM_ExtTRGPrescaler | (TIM_ExtTRGPolarity | (ExtTRGFilter << 8U))); - - /* Write to TIMx SMCR */ - TIMx->SMCR = tmpsmcr; -} - -/** - * @brief Enables or disables the TIM Capture Compare Channel x. - * @param TIMx to select the TIM peripheral - * @param Channel specifies the TIM Channel - * This parameter can be one of the following values: - * @arg TIM_CHANNEL_1: TIM Channel 1 - * @arg TIM_CHANNEL_2: TIM Channel 2 - * @arg TIM_CHANNEL_3: TIM Channel 3 - * @arg TIM_CHANNEL_4: TIM Channel 4 - * @arg TIM_CHANNEL_5: TIM Channel 5 selected - * @arg TIM_CHANNEL_6: TIM Channel 6 selected - * @param ChannelState specifies the TIM Channel CCxE bit new state. - * This parameter can be: TIM_CCx_ENABLE or TIM_CCx_DISABLE. - * @retval None - */ -void TIM_CCxChannelCmd(TIM_TypeDef *TIMx, uint32_t Channel, uint32_t ChannelState) -{ - uint32_t tmp; - - /* Check the parameters */ - assert_param(IS_TIM_CC1_INSTANCE(TIMx)); - assert_param(IS_TIM_CHANNELS(Channel)); - - tmp = TIM_CCER_CC1E << (Channel & 0x1FU); /* 0x1FU = 31 bits max shift */ - - /* Reset the CCxE Bit */ - TIMx->CCER &= ~tmp; - - /* Set or reset the CCxE Bit */ - TIMx->CCER |= (uint32_t)(ChannelState << (Channel & 0x1FU)); /* 0x1FU = 31 bits max shift */ -} - -#if (USE_HAL_TIM_REGISTER_CALLBACKS == 1) -/** - * @brief Reset interrupt callbacks to the legacy weak callbacks. - * @param htim pointer to a TIM_HandleTypeDef structure that contains - * the configuration information for TIM module. - * @retval None - */ -void TIM_ResetCallback(TIM_HandleTypeDef *htim) -{ - /* Reset the TIM callback to the legacy weak callbacks */ - htim->PeriodElapsedCallback = HAL_TIM_PeriodElapsedCallback; /* Legacy weak PeriodElapsedCallback */ - htim->PeriodElapsedHalfCpltCallback = HAL_TIM_PeriodElapsedHalfCpltCallback; /* Legacy weak PeriodElapsedHalfCpltCallback */ - htim->TriggerCallback = HAL_TIM_TriggerCallback; /* Legacy weak TriggerCallback */ - htim->TriggerHalfCpltCallback = HAL_TIM_TriggerHalfCpltCallback; /* Legacy weak TriggerHalfCpltCallback */ - htim->IC_CaptureCallback = HAL_TIM_IC_CaptureCallback; /* Legacy weak IC_CaptureCallback */ - htim->IC_CaptureHalfCpltCallback = HAL_TIM_IC_CaptureHalfCpltCallback; /* Legacy weak IC_CaptureHalfCpltCallback */ - htim->OC_DelayElapsedCallback = HAL_TIM_OC_DelayElapsedCallback; /* Legacy weak OC_DelayElapsedCallback */ - htim->PWM_PulseFinishedCallback = HAL_TIM_PWM_PulseFinishedCallback; /* Legacy weak PWM_PulseFinishedCallback */ - htim->PWM_PulseFinishedHalfCpltCallback = HAL_TIM_PWM_PulseFinishedHalfCpltCallback; /* Legacy weak PWM_PulseFinishedHalfCpltCallback */ - htim->ErrorCallback = HAL_TIM_ErrorCallback; /* Legacy weak ErrorCallback */ - htim->CommutationCallback = HAL_TIMEx_CommutCallback; /* Legacy weak CommutationCallback */ - htim->CommutationHalfCpltCallback = HAL_TIMEx_CommutHalfCpltCallback; /* Legacy weak CommutationHalfCpltCallback */ - htim->BreakCallback = HAL_TIMEx_BreakCallback; /* Legacy weak BreakCallback */ - htim->Break2Callback = HAL_TIMEx_Break2Callback; /* Legacy weak Break2Callback */ -} -#endif /* USE_HAL_TIM_REGISTER_CALLBACKS */ - -/** - * @} - */ - -#endif /* HAL_TIM_MODULE_ENABLED */ -/** - * @} - */ - -/** - * @} - */ -/************************ (C) COPYRIGHT STMicroelectronics *****END OF FILE****/ diff --git a/test_dma/Drivers/STM32F7xx_HAL_Driver/Src/stm32f7xx_hal_tim_ex.c b/test_dma/Drivers/STM32F7xx_HAL_Driver/Src/stm32f7xx_hal_tim_ex.c deleted file mode 100644 index 271f11e..0000000 --- a/test_dma/Drivers/STM32F7xx_HAL_Driver/Src/stm32f7xx_hal_tim_ex.c +++ /dev/null @@ -1,2137 +0,0 @@ -/** - ****************************************************************************** - * @file stm32f7xx_hal_tim_ex.c - * @author MCD Application Team - * @brief TIM HAL module driver. - * This file provides firmware functions to manage the following - * functionalities of the Timer Extended peripheral: - * + Time Hall Sensor Interface Initialization - * + Time Hall Sensor Interface Start - * + Time Complementary signal break and dead time configuration - * + Time Master and Slave synchronization configuration - * + Time Output Compare/PWM Channel Configuration (for channels 5 and 6) - * + Timer remapping capabilities configuration - @verbatim - ============================================================================== - ##### TIMER Extended features ##### - ============================================================================== - [..] - The Timer Extended features include: - (#) Complementary outputs with programmable dead-time for : - (++) Output Compare - (++) PWM generation (Edge and Center-aligned Mode) - (++) One-pulse mode output - (#) Synchronization circuit to control the timer with external signals and to - interconnect several timers together. - (#) Break input to put the timer output signals in reset state or in a known state. - (#) Supports incremental (quadrature) encoder and hall-sensor circuitry for - positioning purposes - - ##### How to use this driver ##### - ============================================================================== - [..] - (#) Initialize the TIM low level resources by implementing the following functions - depending on the selected feature: - (++) Hall Sensor output : HAL_TIMEx_HallSensor_MspInit() - - (#) Initialize the TIM low level resources : - (##) Enable the TIM interface clock using __HAL_RCC_TIMx_CLK_ENABLE(); - (##) TIM pins configuration - (+++) Enable the clock for the TIM GPIOs using the following function: - __HAL_RCC_GPIOx_CLK_ENABLE(); - (+++) Configure these TIM pins in Alternate function mode using HAL_GPIO_Init(); - - (#) The external Clock can be configured, if needed (the default clock is the - internal clock from the APBx), using the following function: - HAL_TIM_ConfigClockSource, the clock configuration should be done before - any start function. - - (#) Configure the TIM in the desired functioning mode using one of the - initialization function of this driver: - (++) HAL_TIMEx_HallSensor_Init() and HAL_TIMEx_ConfigCommutEvent(): to use the - Timer Hall Sensor Interface and the commutation event with the corresponding - Interrupt and DMA request if needed (Note that One Timer is used to interface - with the Hall sensor Interface and another Timer should be used to use - the commutation event). - - (#) Activate the TIM peripheral using one of the start functions: - (++) Complementary Output Compare : HAL_TIMEx_OCN_Start(), HAL_TIMEx_OCN_Start_DMA(), HAL_TIMEx_OC_Start_IT() - (++) Complementary PWM generation : HAL_TIMEx_PWMN_Start(), HAL_TIMEx_PWMN_Start_DMA(), HAL_TIMEx_PWMN_Start_IT() - (++) Complementary One-pulse mode output : HAL_TIMEx_OnePulseN_Start(), HAL_TIMEx_OnePulseN_Start_IT() - (++) Hall Sensor output : HAL_TIMEx_HallSensor_Start(), HAL_TIMEx_HallSensor_Start_DMA(), HAL_TIMEx_HallSensor_Start_IT(). - - @endverbatim - ****************************************************************************** - * @attention - * - *

© Copyright (c) 2017 STMicroelectronics. - * All rights reserved.

- * - * This software component is licensed by ST under BSD 3-Clause license, - * the "License"; You may not use this file except in compliance with the - * License. You may obtain a copy of the License at: - * opensource.org/licenses/BSD-3-Clause - * - ****************************************************************************** -*/ - -/* Includes ------------------------------------------------------------------*/ -#include "stm32f7xx_hal.h" - -/** @addtogroup STM32F7xx_HAL_Driver - * @{ - */ - -/** @defgroup TIMEx TIMEx - * @brief TIM Extended HAL module driver - * @{ - */ - -#ifdef HAL_TIM_MODULE_ENABLED - -/* Private typedef -----------------------------------------------------------*/ -/* Private define ------------------------------------------------------------*/ -/* Private macro -------------------------------------------------------------*/ -/* Private variables ---------------------------------------------------------*/ -/* Private function prototypes -----------------------------------------------*/ -static void TIM_CCxNChannelCmd(TIM_TypeDef *TIMx, uint32_t Channel, uint32_t ChannelNState); - -/* Exported functions --------------------------------------------------------*/ -/** @defgroup TIMEx_Exported_Functions TIM Extended Exported Functions - * @{ - */ - -/** @defgroup TIMEx_Exported_Functions_Group1 Extended Timer Hall Sensor functions - * @brief Timer Hall Sensor functions - * -@verbatim - ============================================================================== - ##### Timer Hall Sensor functions ##### - ============================================================================== - [..] - This section provides functions allowing to: - (+) Initialize and configure TIM HAL Sensor. - (+) De-initialize TIM HAL Sensor. - (+) Start the Hall Sensor Interface. - (+) Stop the Hall Sensor Interface. - (+) Start the Hall Sensor Interface and enable interrupts. - (+) Stop the Hall Sensor Interface and disable interrupts. - (+) Start the Hall Sensor Interface and enable DMA transfers. - (+) Stop the Hall Sensor Interface and disable DMA transfers. - -@endverbatim - * @{ - */ -/** - * @brief Initializes the TIM Hall Sensor Interface and initialize the associated handle. - * @param htim TIM Hall Sensor Interface handle - * @param sConfig TIM Hall Sensor configuration structure - * @retval HAL status - */ -HAL_StatusTypeDef HAL_TIMEx_HallSensor_Init(TIM_HandleTypeDef *htim, TIM_HallSensor_InitTypeDef *sConfig) -{ - TIM_OC_InitTypeDef OC_Config; - - /* Check the TIM handle allocation */ - if (htim == NULL) - { - return HAL_ERROR; - } - - /* Check the parameters */ - assert_param(IS_TIM_HALL_SENSOR_INTERFACE_INSTANCE(htim->Instance)); - assert_param(IS_TIM_COUNTER_MODE(htim->Init.CounterMode)); - assert_param(IS_TIM_CLOCKDIVISION_DIV(htim->Init.ClockDivision)); - assert_param(IS_TIM_AUTORELOAD_PRELOAD(htim->Init.AutoReloadPreload)); - assert_param(IS_TIM_IC_POLARITY(sConfig->IC1Polarity)); - assert_param(IS_TIM_IC_PRESCALER(sConfig->IC1Prescaler)); - assert_param(IS_TIM_IC_FILTER(sConfig->IC1Filter)); - - if (htim->State == HAL_TIM_STATE_RESET) - { - /* Allocate lock resource and initialize it */ - htim->Lock = HAL_UNLOCKED; - -#if (USE_HAL_TIM_REGISTER_CALLBACKS == 1) - /* Reset interrupt callbacks to legacy week callbacks */ - TIM_ResetCallback(htim); - - if (htim->HallSensor_MspInitCallback == NULL) - { - htim->HallSensor_MspInitCallback = HAL_TIMEx_HallSensor_MspInit; - } - /* Init the low level hardware : GPIO, CLOCK, NVIC */ - htim->HallSensor_MspInitCallback(htim); -#else - /* Init the low level hardware : GPIO, CLOCK, NVIC and DMA */ - HAL_TIMEx_HallSensor_MspInit(htim); -#endif /* USE_HAL_TIM_REGISTER_CALLBACKS */ - } - - /* Set the TIM state */ - htim->State = HAL_TIM_STATE_BUSY; - - /* Configure the Time base in the Encoder Mode */ - TIM_Base_SetConfig(htim->Instance, &htim->Init); - - /* Configure the Channel 1 as Input Channel to interface with the three Outputs of the Hall sensor */ - TIM_TI1_SetConfig(htim->Instance, sConfig->IC1Polarity, TIM_ICSELECTION_TRC, sConfig->IC1Filter); - - /* Reset the IC1PSC Bits */ - htim->Instance->CCMR1 &= ~TIM_CCMR1_IC1PSC; - /* Set the IC1PSC value */ - htim->Instance->CCMR1 |= sConfig->IC1Prescaler; - - /* Enable the Hall sensor interface (XOR function of the three inputs) */ - htim->Instance->CR2 |= TIM_CR2_TI1S; - - /* Select the TIM_TS_TI1F_ED signal as Input trigger for the TIM */ - htim->Instance->SMCR &= ~TIM_SMCR_TS; - htim->Instance->SMCR |= TIM_TS_TI1F_ED; - - /* Use the TIM_TS_TI1F_ED signal to reset the TIM counter each edge detection */ - htim->Instance->SMCR &= ~TIM_SMCR_SMS; - htim->Instance->SMCR |= TIM_SLAVEMODE_RESET; - - /* Program channel 2 in PWM 2 mode with the desired Commutation_Delay*/ - OC_Config.OCFastMode = TIM_OCFAST_DISABLE; - OC_Config.OCIdleState = TIM_OCIDLESTATE_RESET; - OC_Config.OCMode = TIM_OCMODE_PWM2; - OC_Config.OCNIdleState = TIM_OCNIDLESTATE_RESET; - OC_Config.OCNPolarity = TIM_OCNPOLARITY_HIGH; - OC_Config.OCPolarity = TIM_OCPOLARITY_HIGH; - OC_Config.Pulse = sConfig->Commutation_Delay; - - TIM_OC2_SetConfig(htim->Instance, &OC_Config); - - /* Select OC2REF as trigger output on TRGO: write the MMS bits in the TIMx_CR2 - register to 101 */ - htim->Instance->CR2 &= ~TIM_CR2_MMS; - htim->Instance->CR2 |= TIM_TRGO_OC2REF; - - /* Initialize the TIM state*/ - htim->State = HAL_TIM_STATE_READY; - - return HAL_OK; -} - -/** - * @brief DeInitializes the TIM Hall Sensor interface - * @param htim TIM Hall Sensor Interface handle - * @retval HAL status - */ -HAL_StatusTypeDef HAL_TIMEx_HallSensor_DeInit(TIM_HandleTypeDef *htim) -{ - /* Check the parameters */ - assert_param(IS_TIM_INSTANCE(htim->Instance)); - - htim->State = HAL_TIM_STATE_BUSY; - - /* Disable the TIM Peripheral Clock */ - __HAL_TIM_DISABLE(htim); - -#if (USE_HAL_TIM_REGISTER_CALLBACKS == 1) - if (htim->HallSensor_MspDeInitCallback == NULL) - { - htim->HallSensor_MspDeInitCallback = HAL_TIMEx_HallSensor_MspDeInit; - } - /* DeInit the low level hardware */ - htim->HallSensor_MspDeInitCallback(htim); -#else - /* DeInit the low level hardware: GPIO, CLOCK, NVIC */ - HAL_TIMEx_HallSensor_MspDeInit(htim); -#endif /* USE_HAL_TIM_REGISTER_CALLBACKS */ - - /* Change TIM state */ - htim->State = HAL_TIM_STATE_RESET; - - /* Release Lock */ - __HAL_UNLOCK(htim); - - return HAL_OK; -} - -/** - * @brief Initializes the TIM Hall Sensor MSP. - * @param htim TIM Hall Sensor Interface handle - * @retval None - */ -__weak void HAL_TIMEx_HallSensor_MspInit(TIM_HandleTypeDef *htim) -{ - /* Prevent unused argument(s) compilation warning */ - UNUSED(htim); - - /* NOTE : This function should not be modified, when the callback is needed, - the HAL_TIMEx_HallSensor_MspInit could be implemented in the user file - */ -} - -/** - * @brief DeInitializes TIM Hall Sensor MSP. - * @param htim TIM Hall Sensor Interface handle - * @retval None - */ -__weak void HAL_TIMEx_HallSensor_MspDeInit(TIM_HandleTypeDef *htim) -{ - /* Prevent unused argument(s) compilation warning */ - UNUSED(htim); - - /* NOTE : This function should not be modified, when the callback is needed, - the HAL_TIMEx_HallSensor_MspDeInit could be implemented in the user file - */ -} - -/** - * @brief Starts the TIM Hall Sensor Interface. - * @param htim TIM Hall Sensor Interface handle - * @retval HAL status - */ -HAL_StatusTypeDef HAL_TIMEx_HallSensor_Start(TIM_HandleTypeDef *htim) -{ - uint32_t tmpsmcr; - - /* Check the parameters */ - assert_param(IS_TIM_HALL_SENSOR_INTERFACE_INSTANCE(htim->Instance)); - - /* Enable the Input Capture channel 1 - (in the Hall Sensor Interface the three possible channels that can be used are TIM_CHANNEL_1, TIM_CHANNEL_2 and TIM_CHANNEL_3) */ - TIM_CCxChannelCmd(htim->Instance, TIM_CHANNEL_1, TIM_CCx_ENABLE); - - /* Enable the Peripheral, except in trigger mode where enable is automatically done with trigger */ - tmpsmcr = htim->Instance->SMCR & TIM_SMCR_SMS; - if (!IS_TIM_SLAVEMODE_TRIGGER_ENABLED(tmpsmcr)) - { - __HAL_TIM_ENABLE(htim); - } - - /* Return function status */ - return HAL_OK; -} - -/** - * @brief Stops the TIM Hall sensor Interface. - * @param htim TIM Hall Sensor Interface handle - * @retval HAL status - */ -HAL_StatusTypeDef HAL_TIMEx_HallSensor_Stop(TIM_HandleTypeDef *htim) -{ - /* Check the parameters */ - assert_param(IS_TIM_HALL_SENSOR_INTERFACE_INSTANCE(htim->Instance)); - - /* Disable the Input Capture channels 1, 2 and 3 - (in the Hall Sensor Interface the three possible channels that can be used are TIM_CHANNEL_1, TIM_CHANNEL_2 and TIM_CHANNEL_3) */ - TIM_CCxChannelCmd(htim->Instance, TIM_CHANNEL_1, TIM_CCx_DISABLE); - - /* Disable the Peripheral */ - __HAL_TIM_DISABLE(htim); - - /* Return function status */ - return HAL_OK; -} - -/** - * @brief Starts the TIM Hall Sensor Interface in interrupt mode. - * @param htim TIM Hall Sensor Interface handle - * @retval HAL status - */ -HAL_StatusTypeDef HAL_TIMEx_HallSensor_Start_IT(TIM_HandleTypeDef *htim) -{ - uint32_t tmpsmcr; - - /* Check the parameters */ - assert_param(IS_TIM_HALL_SENSOR_INTERFACE_INSTANCE(htim->Instance)); - - /* Enable the capture compare Interrupts 1 event */ - __HAL_TIM_ENABLE_IT(htim, TIM_IT_CC1); - - /* Enable the Input Capture channel 1 - (in the Hall Sensor Interface the three possible channels that can be used are TIM_CHANNEL_1, TIM_CHANNEL_2 and TIM_CHANNEL_3) */ - TIM_CCxChannelCmd(htim->Instance, TIM_CHANNEL_1, TIM_CCx_ENABLE); - - /* Enable the Peripheral, except in trigger mode where enable is automatically done with trigger */ - tmpsmcr = htim->Instance->SMCR & TIM_SMCR_SMS; - if (!IS_TIM_SLAVEMODE_TRIGGER_ENABLED(tmpsmcr)) - { - __HAL_TIM_ENABLE(htim); - } - - /* Return function status */ - return HAL_OK; -} - -/** - * @brief Stops the TIM Hall Sensor Interface in interrupt mode. - * @param htim TIM Hall Sensor Interface handle - * @retval HAL status - */ -HAL_StatusTypeDef HAL_TIMEx_HallSensor_Stop_IT(TIM_HandleTypeDef *htim) -{ - /* Check the parameters */ - assert_param(IS_TIM_HALL_SENSOR_INTERFACE_INSTANCE(htim->Instance)); - - /* Disable the Input Capture channel 1 - (in the Hall Sensor Interface the three possible channels that can be used are TIM_CHANNEL_1, TIM_CHANNEL_2 and TIM_CHANNEL_3) */ - TIM_CCxChannelCmd(htim->Instance, TIM_CHANNEL_1, TIM_CCx_DISABLE); - - /* Disable the capture compare Interrupts event */ - __HAL_TIM_DISABLE_IT(htim, TIM_IT_CC1); - - /* Disable the Peripheral */ - __HAL_TIM_DISABLE(htim); - - /* Return function status */ - return HAL_OK; -} - -/** - * @brief Starts the TIM Hall Sensor Interface in DMA mode. - * @param htim TIM Hall Sensor Interface handle - * @param pData The destination Buffer address. - * @param Length The length of data to be transferred from TIM peripheral to memory. - * @retval HAL status - */ -HAL_StatusTypeDef HAL_TIMEx_HallSensor_Start_DMA(TIM_HandleTypeDef *htim, uint32_t *pData, uint16_t Length) -{ - uint32_t tmpsmcr; - - /* Check the parameters */ - assert_param(IS_TIM_HALL_SENSOR_INTERFACE_INSTANCE(htim->Instance)); - - if ((htim->State == HAL_TIM_STATE_BUSY)) - { - return HAL_BUSY; - } - else if ((htim->State == HAL_TIM_STATE_READY)) - { - if (((uint32_t)pData == 0U) && (Length > 0U)) - { - return HAL_ERROR; - } - else - { - htim->State = HAL_TIM_STATE_BUSY; - } - } - else - { - /* nothing to do */ - } - /* Enable the Input Capture channel 1 - (in the Hall Sensor Interface the three possible channels that can be used are TIM_CHANNEL_1, TIM_CHANNEL_2 and TIM_CHANNEL_3) */ - TIM_CCxChannelCmd(htim->Instance, TIM_CHANNEL_1, TIM_CCx_ENABLE); - - /* Set the DMA Input Capture 1 Callbacks */ - htim->hdma[TIM_DMA_ID_CC1]->XferCpltCallback = TIM_DMACaptureCplt; - htim->hdma[TIM_DMA_ID_CC1]->XferHalfCpltCallback = TIM_DMACaptureHalfCplt; - /* Set the DMA error callback */ - htim->hdma[TIM_DMA_ID_CC1]->XferErrorCallback = TIM_DMAError ; - - /* Enable the DMA stream for Capture 1*/ - if (HAL_DMA_Start_IT(htim->hdma[TIM_DMA_ID_CC1], (uint32_t)&htim->Instance->CCR1, (uint32_t)pData, Length) != HAL_OK) - { - return HAL_ERROR; - } - /* Enable the capture compare 1 Interrupt */ - __HAL_TIM_ENABLE_DMA(htim, TIM_DMA_CC1); - - /* Enable the Peripheral, except in trigger mode where enable is automatically done with trigger */ - tmpsmcr = htim->Instance->SMCR & TIM_SMCR_SMS; - if (!IS_TIM_SLAVEMODE_TRIGGER_ENABLED(tmpsmcr)) - { - __HAL_TIM_ENABLE(htim); - } - - /* Return function status */ - return HAL_OK; -} - -/** - * @brief Stops the TIM Hall Sensor Interface in DMA mode. - * @param htim TIM Hall Sensor Interface handle - * @retval HAL status - */ -HAL_StatusTypeDef HAL_TIMEx_HallSensor_Stop_DMA(TIM_HandleTypeDef *htim) -{ - /* Check the parameters */ - assert_param(IS_TIM_HALL_SENSOR_INTERFACE_INSTANCE(htim->Instance)); - - /* Disable the Input Capture channel 1 - (in the Hall Sensor Interface the three possible channels that can be used are TIM_CHANNEL_1, TIM_CHANNEL_2 and TIM_CHANNEL_3) */ - TIM_CCxChannelCmd(htim->Instance, TIM_CHANNEL_1, TIM_CCx_DISABLE); - - - /* Disable the capture compare Interrupts 1 event */ - __HAL_TIM_DISABLE_DMA(htim, TIM_DMA_CC1); - - (void)HAL_DMA_Abort_IT(htim->hdma[TIM_DMA_ID_CC1]); - /* Disable the Peripheral */ - __HAL_TIM_DISABLE(htim); - - /* Return function status */ - return HAL_OK; -} - -/** - * @} - */ - -/** @defgroup TIMEx_Exported_Functions_Group2 Extended Timer Complementary Output Compare functions - * @brief Timer Complementary Output Compare functions - * -@verbatim - ============================================================================== - ##### Timer Complementary Output Compare functions ##### - ============================================================================== - [..] - This section provides functions allowing to: - (+) Start the Complementary Output Compare/PWM. - (+) Stop the Complementary Output Compare/PWM. - (+) Start the Complementary Output Compare/PWM and enable interrupts. - (+) Stop the Complementary Output Compare/PWM and disable interrupts. - (+) Start the Complementary Output Compare/PWM and enable DMA transfers. - (+) Stop the Complementary Output Compare/PWM and disable DMA transfers. - -@endverbatim - * @{ - */ - -/** - * @brief Starts the TIM Output Compare signal generation on the complementary - * output. - * @param htim TIM Output Compare handle - * @param Channel TIM Channel to be enabled - * This parameter can be one of the following values: - * @arg TIM_CHANNEL_1: TIM Channel 1 selected - * @arg TIM_CHANNEL_2: TIM Channel 2 selected - * @arg TIM_CHANNEL_3: TIM Channel 3 selected - * @retval HAL status - */ -HAL_StatusTypeDef HAL_TIMEx_OCN_Start(TIM_HandleTypeDef *htim, uint32_t Channel) -{ - uint32_t tmpsmcr; - - /* Check the parameters */ - assert_param(IS_TIM_CCXN_INSTANCE(htim->Instance, Channel)); - - /* Enable the Capture compare channel N */ - TIM_CCxNChannelCmd(htim->Instance, Channel, TIM_CCxN_ENABLE); - - /* Enable the Main Output */ - __HAL_TIM_MOE_ENABLE(htim); - - /* Enable the Peripheral, except in trigger mode where enable is automatically done with trigger */ - tmpsmcr = htim->Instance->SMCR & TIM_SMCR_SMS; - if (!IS_TIM_SLAVEMODE_TRIGGER_ENABLED(tmpsmcr)) - { - __HAL_TIM_ENABLE(htim); - } - - /* Return function status */ - return HAL_OK; -} - -/** - * @brief Stops the TIM Output Compare signal generation on the complementary - * output. - * @param htim TIM handle - * @param Channel TIM Channel to be disabled - * This parameter can be one of the following values: - * @arg TIM_CHANNEL_1: TIM Channel 1 selected - * @arg TIM_CHANNEL_2: TIM Channel 2 selected - * @arg TIM_CHANNEL_3: TIM Channel 3 selected - * @retval HAL status - */ -HAL_StatusTypeDef HAL_TIMEx_OCN_Stop(TIM_HandleTypeDef *htim, uint32_t Channel) -{ - /* Check the parameters */ - assert_param(IS_TIM_CCXN_INSTANCE(htim->Instance, Channel)); - - /* Disable the Capture compare channel N */ - TIM_CCxNChannelCmd(htim->Instance, Channel, TIM_CCxN_DISABLE); - - /* Disable the Main Output */ - __HAL_TIM_MOE_DISABLE(htim); - - /* Disable the Peripheral */ - __HAL_TIM_DISABLE(htim); - - /* Return function status */ - return HAL_OK; -} - -/** - * @brief Starts the TIM Output Compare signal generation in interrupt mode - * on the complementary output. - * @param htim TIM OC handle - * @param Channel TIM Channel to be enabled - * This parameter can be one of the following values: - * @arg TIM_CHANNEL_1: TIM Channel 1 selected - * @arg TIM_CHANNEL_2: TIM Channel 2 selected - * @arg TIM_CHANNEL_3: TIM Channel 3 selected - * @retval HAL status - */ -HAL_StatusTypeDef HAL_TIMEx_OCN_Start_IT(TIM_HandleTypeDef *htim, uint32_t Channel) -{ - uint32_t tmpsmcr; - - /* Check the parameters */ - assert_param(IS_TIM_CCXN_INSTANCE(htim->Instance, Channel)); - - switch (Channel) - { - case TIM_CHANNEL_1: - { - /* Enable the TIM Output Compare interrupt */ - __HAL_TIM_ENABLE_IT(htim, TIM_IT_CC1); - break; - } - - case TIM_CHANNEL_2: - { - /* Enable the TIM Output Compare interrupt */ - __HAL_TIM_ENABLE_IT(htim, TIM_IT_CC2); - break; - } - - case TIM_CHANNEL_3: - { - /* Enable the TIM Output Compare interrupt */ - __HAL_TIM_ENABLE_IT(htim, TIM_IT_CC3); - break; - } - - - default: - break; - } - - /* Enable the TIM Break interrupt */ - __HAL_TIM_ENABLE_IT(htim, TIM_IT_BREAK); - - /* Enable the Capture compare channel N */ - TIM_CCxNChannelCmd(htim->Instance, Channel, TIM_CCxN_ENABLE); - - /* Enable the Main Output */ - __HAL_TIM_MOE_ENABLE(htim); - - /* Enable the Peripheral, except in trigger mode where enable is automatically done with trigger */ - tmpsmcr = htim->Instance->SMCR & TIM_SMCR_SMS; - if (!IS_TIM_SLAVEMODE_TRIGGER_ENABLED(tmpsmcr)) - { - __HAL_TIM_ENABLE(htim); - } - - /* Return function status */ - return HAL_OK; -} - -/** - * @brief Stops the TIM Output Compare signal generation in interrupt mode - * on the complementary output. - * @param htim TIM Output Compare handle - * @param Channel TIM Channel to be disabled - * This parameter can be one of the following values: - * @arg TIM_CHANNEL_1: TIM Channel 1 selected - * @arg TIM_CHANNEL_2: TIM Channel 2 selected - * @arg TIM_CHANNEL_3: TIM Channel 3 selected - * @retval HAL status - */ -HAL_StatusTypeDef HAL_TIMEx_OCN_Stop_IT(TIM_HandleTypeDef *htim, uint32_t Channel) -{ - uint32_t tmpccer; - /* Check the parameters */ - assert_param(IS_TIM_CCXN_INSTANCE(htim->Instance, Channel)); - - switch (Channel) - { - case TIM_CHANNEL_1: - { - /* Disable the TIM Output Compare interrupt */ - __HAL_TIM_DISABLE_IT(htim, TIM_IT_CC1); - break; - } - - case TIM_CHANNEL_2: - { - /* Disable the TIM Output Compare interrupt */ - __HAL_TIM_DISABLE_IT(htim, TIM_IT_CC2); - break; - } - - case TIM_CHANNEL_3: - { - /* Disable the TIM Output Compare interrupt */ - __HAL_TIM_DISABLE_IT(htim, TIM_IT_CC3); - break; - } - - default: - break; - } - - /* Disable the Capture compare channel N */ - TIM_CCxNChannelCmd(htim->Instance, Channel, TIM_CCxN_DISABLE); - - /* Disable the TIM Break interrupt (only if no more channel is active) */ - tmpccer = htim->Instance->CCER; - if ((tmpccer & (TIM_CCER_CC1NE | TIM_CCER_CC2NE | TIM_CCER_CC3NE)) == (uint32_t)RESET) - { - __HAL_TIM_DISABLE_IT(htim, TIM_IT_BREAK); - } - - /* Disable the Main Output */ - __HAL_TIM_MOE_DISABLE(htim); - - /* Disable the Peripheral */ - __HAL_TIM_DISABLE(htim); - - /* Return function status */ - return HAL_OK; -} - -/** - * @brief Starts the TIM Output Compare signal generation in DMA mode - * on the complementary output. - * @param htim TIM Output Compare handle - * @param Channel TIM Channel to be enabled - * This parameter can be one of the following values: - * @arg TIM_CHANNEL_1: TIM Channel 1 selected - * @arg TIM_CHANNEL_2: TIM Channel 2 selected - * @arg TIM_CHANNEL_3: TIM Channel 3 selected - * @param pData The source Buffer address. - * @param Length The length of data to be transferred from memory to TIM peripheral - * @retval HAL status - */ -HAL_StatusTypeDef HAL_TIMEx_OCN_Start_DMA(TIM_HandleTypeDef *htim, uint32_t Channel, uint32_t *pData, uint16_t Length) -{ - uint32_t tmpsmcr; - - /* Check the parameters */ - assert_param(IS_TIM_CCXN_INSTANCE(htim->Instance, Channel)); - - if ((htim->State == HAL_TIM_STATE_BUSY)) - { - return HAL_BUSY; - } - else if ((htim->State == HAL_TIM_STATE_READY)) - { - if (((uint32_t)pData == 0U) && (Length > 0U)) - { - return HAL_ERROR; - } - else - { - htim->State = HAL_TIM_STATE_BUSY; - } - } - else - { - /* nothing to do */ - } - - switch (Channel) - { - case TIM_CHANNEL_1: - { - /* Set the DMA compare callbacks */ - htim->hdma[TIM_DMA_ID_CC1]->XferCpltCallback = TIM_DMADelayPulseCplt; - htim->hdma[TIM_DMA_ID_CC1]->XferHalfCpltCallback = TIM_DMADelayPulseHalfCplt; - - /* Set the DMA error callback */ - htim->hdma[TIM_DMA_ID_CC1]->XferErrorCallback = TIM_DMAError ; - - /* Enable the DMA stream */ - if (HAL_DMA_Start_IT(htim->hdma[TIM_DMA_ID_CC1], (uint32_t)pData, (uint32_t)&htim->Instance->CCR1, Length) != HAL_OK) - { - return HAL_ERROR; - } - /* Enable the TIM Output Compare DMA request */ - __HAL_TIM_ENABLE_DMA(htim, TIM_DMA_CC1); - break; - } - - case TIM_CHANNEL_2: - { - /* Set the DMA compare callbacks */ - htim->hdma[TIM_DMA_ID_CC2]->XferCpltCallback = TIM_DMADelayPulseCplt; - htim->hdma[TIM_DMA_ID_CC2]->XferHalfCpltCallback = TIM_DMADelayPulseHalfCplt; - - /* Set the DMA error callback */ - htim->hdma[TIM_DMA_ID_CC2]->XferErrorCallback = TIM_DMAError ; - - /* Enable the DMA stream */ - if (HAL_DMA_Start_IT(htim->hdma[TIM_DMA_ID_CC2], (uint32_t)pData, (uint32_t)&htim->Instance->CCR2, Length) != HAL_OK) - { - return HAL_ERROR; - } - /* Enable the TIM Output Compare DMA request */ - __HAL_TIM_ENABLE_DMA(htim, TIM_DMA_CC2); - break; - } - - case TIM_CHANNEL_3: - { - /* Set the DMA compare callbacks */ - htim->hdma[TIM_DMA_ID_CC3]->XferCpltCallback = TIM_DMADelayPulseCplt; - htim->hdma[TIM_DMA_ID_CC3]->XferHalfCpltCallback = TIM_DMADelayPulseHalfCplt; - - /* Set the DMA error callback */ - htim->hdma[TIM_DMA_ID_CC3]->XferErrorCallback = TIM_DMAError ; - - /* Enable the DMA stream */ - if (HAL_DMA_Start_IT(htim->hdma[TIM_DMA_ID_CC3], (uint32_t)pData, (uint32_t)&htim->Instance->CCR3, Length) != HAL_OK) - { - return HAL_ERROR; - } - /* Enable the TIM Output Compare DMA request */ - __HAL_TIM_ENABLE_DMA(htim, TIM_DMA_CC3); - break; - } - - default: - break; - } - - /* Enable the Capture compare channel N */ - TIM_CCxNChannelCmd(htim->Instance, Channel, TIM_CCxN_ENABLE); - - /* Enable the Main Output */ - __HAL_TIM_MOE_ENABLE(htim); - - /* Enable the Peripheral, except in trigger mode where enable is automatically done with trigger */ - tmpsmcr = htim->Instance->SMCR & TIM_SMCR_SMS; - if (!IS_TIM_SLAVEMODE_TRIGGER_ENABLED(tmpsmcr)) - { - __HAL_TIM_ENABLE(htim); - } - - /* Return function status */ - return HAL_OK; -} - -/** - * @brief Stops the TIM Output Compare signal generation in DMA mode - * on the complementary output. - * @param htim TIM Output Compare handle - * @param Channel TIM Channel to be disabled - * This parameter can be one of the following values: - * @arg TIM_CHANNEL_1: TIM Channel 1 selected - * @arg TIM_CHANNEL_2: TIM Channel 2 selected - * @arg TIM_CHANNEL_3: TIM Channel 3 selected - * @retval HAL status - */ -HAL_StatusTypeDef HAL_TIMEx_OCN_Stop_DMA(TIM_HandleTypeDef *htim, uint32_t Channel) -{ - /* Check the parameters */ - assert_param(IS_TIM_CCXN_INSTANCE(htim->Instance, Channel)); - - switch (Channel) - { - case TIM_CHANNEL_1: - { - /* Disable the TIM Output Compare DMA request */ - __HAL_TIM_DISABLE_DMA(htim, TIM_DMA_CC1); - (void)HAL_DMA_Abort_IT(htim->hdma[TIM_DMA_ID_CC1]); - break; - } - - case TIM_CHANNEL_2: - { - /* Disable the TIM Output Compare DMA request */ - __HAL_TIM_DISABLE_DMA(htim, TIM_DMA_CC2); - (void)HAL_DMA_Abort_IT(htim->hdma[TIM_DMA_ID_CC2]); - break; - } - - case TIM_CHANNEL_3: - { - /* Disable the TIM Output Compare DMA request */ - __HAL_TIM_DISABLE_DMA(htim, TIM_DMA_CC3); - (void)HAL_DMA_Abort_IT(htim->hdma[TIM_DMA_ID_CC3]); - break; - } - - default: - break; - } - - /* Disable the Capture compare channel N */ - TIM_CCxNChannelCmd(htim->Instance, Channel, TIM_CCxN_DISABLE); - - /* Disable the Main Output */ - __HAL_TIM_MOE_DISABLE(htim); - - /* Disable the Peripheral */ - __HAL_TIM_DISABLE(htim); - - /* Change the htim state */ - htim->State = HAL_TIM_STATE_READY; - - /* Return function status */ - return HAL_OK; -} - -/** - * @} - */ - -/** @defgroup TIMEx_Exported_Functions_Group3 Extended Timer Complementary PWM functions - * @brief Timer Complementary PWM functions - * -@verbatim - ============================================================================== - ##### Timer Complementary PWM functions ##### - ============================================================================== - [..] - This section provides functions allowing to: - (+) Start the Complementary PWM. - (+) Stop the Complementary PWM. - (+) Start the Complementary PWM and enable interrupts. - (+) Stop the Complementary PWM and disable interrupts. - (+) Start the Complementary PWM and enable DMA transfers. - (+) Stop the Complementary PWM and disable DMA transfers. - (+) Start the Complementary Input Capture measurement. - (+) Stop the Complementary Input Capture. - (+) Start the Complementary Input Capture and enable interrupts. - (+) Stop the Complementary Input Capture and disable interrupts. - (+) Start the Complementary Input Capture and enable DMA transfers. - (+) Stop the Complementary Input Capture and disable DMA transfers. - (+) Start the Complementary One Pulse generation. - (+) Stop the Complementary One Pulse. - (+) Start the Complementary One Pulse and enable interrupts. - (+) Stop the Complementary One Pulse and disable interrupts. - -@endverbatim - * @{ - */ - -/** - * @brief Starts the PWM signal generation on the complementary output. - * @param htim TIM handle - * @param Channel TIM Channel to be enabled - * This parameter can be one of the following values: - * @arg TIM_CHANNEL_1: TIM Channel 1 selected - * @arg TIM_CHANNEL_2: TIM Channel 2 selected - * @arg TIM_CHANNEL_3: TIM Channel 3 selected - * @retval HAL status - */ -HAL_StatusTypeDef HAL_TIMEx_PWMN_Start(TIM_HandleTypeDef *htim, uint32_t Channel) -{ - uint32_t tmpsmcr; - - /* Check the parameters */ - assert_param(IS_TIM_CCXN_INSTANCE(htim->Instance, Channel)); - - /* Enable the complementary PWM output */ - TIM_CCxNChannelCmd(htim->Instance, Channel, TIM_CCxN_ENABLE); - - /* Enable the Main Output */ - __HAL_TIM_MOE_ENABLE(htim); - - /* Enable the Peripheral, except in trigger mode where enable is automatically done with trigger */ - tmpsmcr = htim->Instance->SMCR & TIM_SMCR_SMS; - if (!IS_TIM_SLAVEMODE_TRIGGER_ENABLED(tmpsmcr)) - { - __HAL_TIM_ENABLE(htim); - } - - /* Return function status */ - return HAL_OK; -} - -/** - * @brief Stops the PWM signal generation on the complementary output. - * @param htim TIM handle - * @param Channel TIM Channel to be disabled - * This parameter can be one of the following values: - * @arg TIM_CHANNEL_1: TIM Channel 1 selected - * @arg TIM_CHANNEL_2: TIM Channel 2 selected - * @arg TIM_CHANNEL_3: TIM Channel 3 selected - * @retval HAL status - */ -HAL_StatusTypeDef HAL_TIMEx_PWMN_Stop(TIM_HandleTypeDef *htim, uint32_t Channel) -{ - /* Check the parameters */ - assert_param(IS_TIM_CCXN_INSTANCE(htim->Instance, Channel)); - - /* Disable the complementary PWM output */ - TIM_CCxNChannelCmd(htim->Instance, Channel, TIM_CCxN_DISABLE); - - /* Disable the Main Output */ - __HAL_TIM_MOE_DISABLE(htim); - - /* Disable the Peripheral */ - __HAL_TIM_DISABLE(htim); - - /* Return function status */ - return HAL_OK; -} - -/** - * @brief Starts the PWM signal generation in interrupt mode on the - * complementary output. - * @param htim TIM handle - * @param Channel TIM Channel to be disabled - * This parameter can be one of the following values: - * @arg TIM_CHANNEL_1: TIM Channel 1 selected - * @arg TIM_CHANNEL_2: TIM Channel 2 selected - * @arg TIM_CHANNEL_3: TIM Channel 3 selected - * @retval HAL status - */ -HAL_StatusTypeDef HAL_TIMEx_PWMN_Start_IT(TIM_HandleTypeDef *htim, uint32_t Channel) -{ - uint32_t tmpsmcr; - - /* Check the parameters */ - assert_param(IS_TIM_CCXN_INSTANCE(htim->Instance, Channel)); - - switch (Channel) - { - case TIM_CHANNEL_1: - { - /* Enable the TIM Capture/Compare 1 interrupt */ - __HAL_TIM_ENABLE_IT(htim, TIM_IT_CC1); - break; - } - - case TIM_CHANNEL_2: - { - /* Enable the TIM Capture/Compare 2 interrupt */ - __HAL_TIM_ENABLE_IT(htim, TIM_IT_CC2); - break; - } - - case TIM_CHANNEL_3: - { - /* Enable the TIM Capture/Compare 3 interrupt */ - __HAL_TIM_ENABLE_IT(htim, TIM_IT_CC3); - break; - } - - default: - break; - } - - /* Enable the TIM Break interrupt */ - __HAL_TIM_ENABLE_IT(htim, TIM_IT_BREAK); - - /* Enable the complementary PWM output */ - TIM_CCxNChannelCmd(htim->Instance, Channel, TIM_CCxN_ENABLE); - - /* Enable the Main Output */ - __HAL_TIM_MOE_ENABLE(htim); - - /* Enable the Peripheral, except in trigger mode where enable is automatically done with trigger */ - tmpsmcr = htim->Instance->SMCR & TIM_SMCR_SMS; - if (!IS_TIM_SLAVEMODE_TRIGGER_ENABLED(tmpsmcr)) - { - __HAL_TIM_ENABLE(htim); - } - - /* Return function status */ - return HAL_OK; -} - -/** - * @brief Stops the PWM signal generation in interrupt mode on the - * complementary output. - * @param htim TIM handle - * @param Channel TIM Channel to be disabled - * This parameter can be one of the following values: - * @arg TIM_CHANNEL_1: TIM Channel 1 selected - * @arg TIM_CHANNEL_2: TIM Channel 2 selected - * @arg TIM_CHANNEL_3: TIM Channel 3 selected - * @retval HAL status - */ -HAL_StatusTypeDef HAL_TIMEx_PWMN_Stop_IT(TIM_HandleTypeDef *htim, uint32_t Channel) -{ - uint32_t tmpccer; - - /* Check the parameters */ - assert_param(IS_TIM_CCXN_INSTANCE(htim->Instance, Channel)); - - switch (Channel) - { - case TIM_CHANNEL_1: - { - /* Disable the TIM Capture/Compare 1 interrupt */ - __HAL_TIM_DISABLE_IT(htim, TIM_IT_CC1); - break; - } - - case TIM_CHANNEL_2: - { - /* Disable the TIM Capture/Compare 2 interrupt */ - __HAL_TIM_DISABLE_IT(htim, TIM_IT_CC2); - break; - } - - case TIM_CHANNEL_3: - { - /* Disable the TIM Capture/Compare 3 interrupt */ - __HAL_TIM_DISABLE_IT(htim, TIM_IT_CC3); - break; - } - - default: - break; - } - - /* Disable the complementary PWM output */ - TIM_CCxNChannelCmd(htim->Instance, Channel, TIM_CCxN_DISABLE); - - /* Disable the TIM Break interrupt (only if no more channel is active) */ - tmpccer = htim->Instance->CCER; - if ((tmpccer & (TIM_CCER_CC1NE | TIM_CCER_CC2NE | TIM_CCER_CC3NE)) == (uint32_t)RESET) - { - __HAL_TIM_DISABLE_IT(htim, TIM_IT_BREAK); - } - - /* Disable the Main Output */ - __HAL_TIM_MOE_DISABLE(htim); - - /* Disable the Peripheral */ - __HAL_TIM_DISABLE(htim); - - /* Return function status */ - return HAL_OK; -} - -/** - * @brief Starts the TIM PWM signal generation in DMA mode on the - * complementary output - * @param htim TIM handle - * @param Channel TIM Channel to be enabled - * This parameter can be one of the following values: - * @arg TIM_CHANNEL_1: TIM Channel 1 selected - * @arg TIM_CHANNEL_2: TIM Channel 2 selected - * @arg TIM_CHANNEL_3: TIM Channel 3 selected - * @param pData The source Buffer address. - * @param Length The length of data to be transferred from memory to TIM peripheral - * @retval HAL status - */ -HAL_StatusTypeDef HAL_TIMEx_PWMN_Start_DMA(TIM_HandleTypeDef *htim, uint32_t Channel, uint32_t *pData, uint16_t Length) -{ - uint32_t tmpsmcr; - - /* Check the parameters */ - assert_param(IS_TIM_CCXN_INSTANCE(htim->Instance, Channel)); - - if ((htim->State == HAL_TIM_STATE_BUSY)) - { - return HAL_BUSY; - } - else if ((htim->State == HAL_TIM_STATE_READY)) - { - if (((uint32_t)pData == 0U) && (Length > 0U)) - { - return HAL_ERROR; - } - else - { - htim->State = HAL_TIM_STATE_BUSY; - } - } - else - { - /* nothing to do */ - } - switch (Channel) - { - case TIM_CHANNEL_1: - { - /* Set the DMA compare callbacks */ - htim->hdma[TIM_DMA_ID_CC1]->XferCpltCallback = TIM_DMADelayPulseCplt; - htim->hdma[TIM_DMA_ID_CC1]->XferHalfCpltCallback = TIM_DMADelayPulseHalfCplt; - - /* Set the DMA error callback */ - htim->hdma[TIM_DMA_ID_CC1]->XferErrorCallback = TIM_DMAError ; - - /* Enable the DMA stream */ - if (HAL_DMA_Start_IT(htim->hdma[TIM_DMA_ID_CC1], (uint32_t)pData, (uint32_t)&htim->Instance->CCR1, Length) != HAL_OK) - { - return HAL_ERROR; - } - /* Enable the TIM Capture/Compare 1 DMA request */ - __HAL_TIM_ENABLE_DMA(htim, TIM_DMA_CC1); - break; - } - - case TIM_CHANNEL_2: - { - /* Set the DMA compare callbacks */ - htim->hdma[TIM_DMA_ID_CC2]->XferCpltCallback = TIM_DMADelayPulseCplt; - htim->hdma[TIM_DMA_ID_CC2]->XferHalfCpltCallback = TIM_DMADelayPulseHalfCplt; - - /* Set the DMA error callback */ - htim->hdma[TIM_DMA_ID_CC2]->XferErrorCallback = TIM_DMAError ; - - /* Enable the DMA stream */ - if (HAL_DMA_Start_IT(htim->hdma[TIM_DMA_ID_CC2], (uint32_t)pData, (uint32_t)&htim->Instance->CCR2, Length) != HAL_OK) - { - return HAL_ERROR; - } - /* Enable the TIM Capture/Compare 2 DMA request */ - __HAL_TIM_ENABLE_DMA(htim, TIM_DMA_CC2); - break; - } - - case TIM_CHANNEL_3: - { - /* Set the DMA compare callbacks */ - htim->hdma[TIM_DMA_ID_CC3]->XferCpltCallback = TIM_DMADelayPulseCplt; - htim->hdma[TIM_DMA_ID_CC3]->XferHalfCpltCallback = TIM_DMADelayPulseHalfCplt; - - /* Set the DMA error callback */ - htim->hdma[TIM_DMA_ID_CC3]->XferErrorCallback = TIM_DMAError ; - - /* Enable the DMA stream */ - if (HAL_DMA_Start_IT(htim->hdma[TIM_DMA_ID_CC3], (uint32_t)pData, (uint32_t)&htim->Instance->CCR3, Length) != HAL_OK) - { - return HAL_ERROR; - } - /* Enable the TIM Capture/Compare 3 DMA request */ - __HAL_TIM_ENABLE_DMA(htim, TIM_DMA_CC3); - break; - } - - default: - break; - } - - /* Enable the complementary PWM output */ - TIM_CCxNChannelCmd(htim->Instance, Channel, TIM_CCxN_ENABLE); - - /* Enable the Main Output */ - __HAL_TIM_MOE_ENABLE(htim); - - /* Enable the Peripheral, except in trigger mode where enable is automatically done with trigger */ - tmpsmcr = htim->Instance->SMCR & TIM_SMCR_SMS; - if (!IS_TIM_SLAVEMODE_TRIGGER_ENABLED(tmpsmcr)) - { - __HAL_TIM_ENABLE(htim); - } - - /* Return function status */ - return HAL_OK; -} - -/** - * @brief Stops the TIM PWM signal generation in DMA mode on the complementary - * output - * @param htim TIM handle - * @param Channel TIM Channel to be disabled - * This parameter can be one of the following values: - * @arg TIM_CHANNEL_1: TIM Channel 1 selected - * @arg TIM_CHANNEL_2: TIM Channel 2 selected - * @arg TIM_CHANNEL_3: TIM Channel 3 selected - * @retval HAL status - */ -HAL_StatusTypeDef HAL_TIMEx_PWMN_Stop_DMA(TIM_HandleTypeDef *htim, uint32_t Channel) -{ - /* Check the parameters */ - assert_param(IS_TIM_CCXN_INSTANCE(htim->Instance, Channel)); - - switch (Channel) - { - case TIM_CHANNEL_1: - { - /* Disable the TIM Capture/Compare 1 DMA request */ - __HAL_TIM_DISABLE_DMA(htim, TIM_DMA_CC1); - (void)HAL_DMA_Abort_IT(htim->hdma[TIM_DMA_ID_CC1]); - break; - } - - case TIM_CHANNEL_2: - { - /* Disable the TIM Capture/Compare 2 DMA request */ - __HAL_TIM_DISABLE_DMA(htim, TIM_DMA_CC2); - (void)HAL_DMA_Abort_IT(htim->hdma[TIM_DMA_ID_CC2]); - break; - } - - case TIM_CHANNEL_3: - { - /* Disable the TIM Capture/Compare 3 DMA request */ - __HAL_TIM_DISABLE_DMA(htim, TIM_DMA_CC3); - (void)HAL_DMA_Abort_IT(htim->hdma[TIM_DMA_ID_CC3]); - break; - } - - default: - break; - } - - /* Disable the complementary PWM output */ - TIM_CCxNChannelCmd(htim->Instance, Channel, TIM_CCxN_DISABLE); - - /* Disable the Main Output */ - __HAL_TIM_MOE_DISABLE(htim); - - /* Disable the Peripheral */ - __HAL_TIM_DISABLE(htim); - - /* Change the htim state */ - htim->State = HAL_TIM_STATE_READY; - - /* Return function status */ - return HAL_OK; -} - -/** - * @} - */ - -/** @defgroup TIMEx_Exported_Functions_Group4 Extended Timer Complementary One Pulse functions - * @brief Timer Complementary One Pulse functions - * -@verbatim - ============================================================================== - ##### Timer Complementary One Pulse functions ##### - ============================================================================== - [..] - This section provides functions allowing to: - (+) Start the Complementary One Pulse generation. - (+) Stop the Complementary One Pulse. - (+) Start the Complementary One Pulse and enable interrupts. - (+) Stop the Complementary One Pulse and disable interrupts. - -@endverbatim - * @{ - */ - -/** - * @brief Starts the TIM One Pulse signal generation on the complementary - * output. - * @param htim TIM One Pulse handle - * @param OutputChannel TIM Channel to be enabled - * This parameter can be one of the following values: - * @arg TIM_CHANNEL_1: TIM Channel 1 selected - * @arg TIM_CHANNEL_2: TIM Channel 2 selected - * @retval HAL status - */ -HAL_StatusTypeDef HAL_TIMEx_OnePulseN_Start(TIM_HandleTypeDef *htim, uint32_t OutputChannel) -{ - /* Check the parameters */ - assert_param(IS_TIM_CCXN_INSTANCE(htim->Instance, OutputChannel)); - - /* Enable the complementary One Pulse output */ - TIM_CCxNChannelCmd(htim->Instance, OutputChannel, TIM_CCxN_ENABLE); - - /* Enable the Main Output */ - __HAL_TIM_MOE_ENABLE(htim); - - /* Return function status */ - return HAL_OK; -} - -/** - * @brief Stops the TIM One Pulse signal generation on the complementary - * output. - * @param htim TIM One Pulse handle - * @param OutputChannel TIM Channel to be disabled - * This parameter can be one of the following values: - * @arg TIM_CHANNEL_1: TIM Channel 1 selected - * @arg TIM_CHANNEL_2: TIM Channel 2 selected - * @retval HAL status - */ -HAL_StatusTypeDef HAL_TIMEx_OnePulseN_Stop(TIM_HandleTypeDef *htim, uint32_t OutputChannel) -{ - - /* Check the parameters */ - assert_param(IS_TIM_CCXN_INSTANCE(htim->Instance, OutputChannel)); - - /* Disable the complementary One Pulse output */ - TIM_CCxNChannelCmd(htim->Instance, OutputChannel, TIM_CCxN_DISABLE); - - /* Disable the Main Output */ - __HAL_TIM_MOE_DISABLE(htim); - - /* Disable the Peripheral */ - __HAL_TIM_DISABLE(htim); - - /* Return function status */ - return HAL_OK; -} - -/** - * @brief Starts the TIM One Pulse signal generation in interrupt mode on the - * complementary channel. - * @param htim TIM One Pulse handle - * @param OutputChannel TIM Channel to be enabled - * This parameter can be one of the following values: - * @arg TIM_CHANNEL_1: TIM Channel 1 selected - * @arg TIM_CHANNEL_2: TIM Channel 2 selected - * @retval HAL status - */ -HAL_StatusTypeDef HAL_TIMEx_OnePulseN_Start_IT(TIM_HandleTypeDef *htim, uint32_t OutputChannel) -{ - /* Check the parameters */ - assert_param(IS_TIM_CCXN_INSTANCE(htim->Instance, OutputChannel)); - - /* Enable the TIM Capture/Compare 1 interrupt */ - __HAL_TIM_ENABLE_IT(htim, TIM_IT_CC1); - - /* Enable the TIM Capture/Compare 2 interrupt */ - __HAL_TIM_ENABLE_IT(htim, TIM_IT_CC2); - - /* Enable the complementary One Pulse output */ - TIM_CCxNChannelCmd(htim->Instance, OutputChannel, TIM_CCxN_ENABLE); - - /* Enable the Main Output */ - __HAL_TIM_MOE_ENABLE(htim); - - /* Return function status */ - return HAL_OK; -} - -/** - * @brief Stops the TIM One Pulse signal generation in interrupt mode on the - * complementary channel. - * @param htim TIM One Pulse handle - * @param OutputChannel TIM Channel to be disabled - * This parameter can be one of the following values: - * @arg TIM_CHANNEL_1: TIM Channel 1 selected - * @arg TIM_CHANNEL_2: TIM Channel 2 selected - * @retval HAL status - */ -HAL_StatusTypeDef HAL_TIMEx_OnePulseN_Stop_IT(TIM_HandleTypeDef *htim, uint32_t OutputChannel) -{ - /* Check the parameters */ - assert_param(IS_TIM_CCXN_INSTANCE(htim->Instance, OutputChannel)); - - /* Disable the TIM Capture/Compare 1 interrupt */ - __HAL_TIM_DISABLE_IT(htim, TIM_IT_CC1); - - /* Disable the TIM Capture/Compare 2 interrupt */ - __HAL_TIM_DISABLE_IT(htim, TIM_IT_CC2); - - /* Disable the complementary One Pulse output */ - TIM_CCxNChannelCmd(htim->Instance, OutputChannel, TIM_CCxN_DISABLE); - - /* Disable the Main Output */ - __HAL_TIM_MOE_DISABLE(htim); - - /* Disable the Peripheral */ - __HAL_TIM_DISABLE(htim); - - /* Return function status */ - return HAL_OK; -} - -/** - * @} - */ - -/** @defgroup TIMEx_Exported_Functions_Group5 Extended Peripheral Control functions - * @brief Peripheral Control functions - * -@verbatim - ============================================================================== - ##### Peripheral Control functions ##### - ============================================================================== - [..] - This section provides functions allowing to: - (+) Configure the commutation event in case of use of the Hall sensor interface. - (+) Configure Output channels for OC and PWM mode. - - (+) Configure Complementary channels, break features and dead time. - (+) Configure Master synchronization. - (+) Configure timer remapping capabilities. - (+) Enable or disable channel grouping. - -@endverbatim - * @{ - */ - -/** - * @brief Configure the TIM commutation event sequence. - * @note This function is mandatory to use the commutation event in order to - * update the configuration at each commutation detection on the TRGI input of the Timer, - * the typical use of this feature is with the use of another Timer(interface Timer) - * configured in Hall sensor interface, this interface Timer will generate the - * commutation at its TRGO output (connected to Timer used in this function) each time - * the TI1 of the Interface Timer detect a commutation at its input TI1. - * @param htim TIM handle - * @param InputTrigger the Internal trigger corresponding to the Timer Interfacing with the Hall sensor - * This parameter can be one of the following values: - * @arg TIM_TS_ITR0: Internal trigger 0 selected - * @arg TIM_TS_ITR1: Internal trigger 1 selected - * @arg TIM_TS_ITR2: Internal trigger 2 selected - * @arg TIM_TS_ITR3: Internal trigger 3 selected - * @arg TIM_TS_NONE: No trigger is needed - * @param CommutationSource the Commutation Event source - * This parameter can be one of the following values: - * @arg TIM_COMMUTATION_TRGI: Commutation source is the TRGI of the Interface Timer - * @arg TIM_COMMUTATION_SOFTWARE: Commutation source is set by software using the COMG bit - * @retval HAL status - */ -HAL_StatusTypeDef HAL_TIMEx_ConfigCommutEvent(TIM_HandleTypeDef *htim, uint32_t InputTrigger, uint32_t CommutationSource) -{ - /* Check the parameters */ - assert_param(IS_TIM_COMMUTATION_EVENT_INSTANCE(htim->Instance)); - assert_param(IS_TIM_INTERNAL_TRIGGEREVENT_SELECTION(InputTrigger)); - - __HAL_LOCK(htim); - - if ((InputTrigger == TIM_TS_ITR0) || (InputTrigger == TIM_TS_ITR1) || - (InputTrigger == TIM_TS_ITR2) || (InputTrigger == TIM_TS_ITR3)) - { - /* Select the Input trigger */ - htim->Instance->SMCR &= ~TIM_SMCR_TS; - htim->Instance->SMCR |= InputTrigger; - } - - /* Select the Capture Compare preload feature */ - htim->Instance->CR2 |= TIM_CR2_CCPC; - /* Select the Commutation event source */ - htim->Instance->CR2 &= ~TIM_CR2_CCUS; - htim->Instance->CR2 |= CommutationSource; - - /* Disable Commutation Interrupt */ - __HAL_TIM_DISABLE_IT(htim, TIM_IT_COM); - - /* Disable Commutation DMA request */ - __HAL_TIM_DISABLE_DMA(htim, TIM_DMA_COM); - - __HAL_UNLOCK(htim); - - return HAL_OK; -} - -/** - * @brief Configure the TIM commutation event sequence with interrupt. - * @note This function is mandatory to use the commutation event in order to - * update the configuration at each commutation detection on the TRGI input of the Timer, - * the typical use of this feature is with the use of another Timer(interface Timer) - * configured in Hall sensor interface, this interface Timer will generate the - * commutation at its TRGO output (connected to Timer used in this function) each time - * the TI1 of the Interface Timer detect a commutation at its input TI1. - * @param htim TIM handle - * @param InputTrigger the Internal trigger corresponding to the Timer Interfacing with the Hall sensor - * This parameter can be one of the following values: - * @arg TIM_TS_ITR0: Internal trigger 0 selected - * @arg TIM_TS_ITR1: Internal trigger 1 selected - * @arg TIM_TS_ITR2: Internal trigger 2 selected - * @arg TIM_TS_ITR3: Internal trigger 3 selected - * @arg TIM_TS_NONE: No trigger is needed - * @param CommutationSource the Commutation Event source - * This parameter can be one of the following values: - * @arg TIM_COMMUTATION_TRGI: Commutation source is the TRGI of the Interface Timer - * @arg TIM_COMMUTATION_SOFTWARE: Commutation source is set by software using the COMG bit - * @retval HAL status - */ -HAL_StatusTypeDef HAL_TIMEx_ConfigCommutEvent_IT(TIM_HandleTypeDef *htim, uint32_t InputTrigger, uint32_t CommutationSource) -{ - /* Check the parameters */ - assert_param(IS_TIM_COMMUTATION_EVENT_INSTANCE(htim->Instance)); - assert_param(IS_TIM_INTERNAL_TRIGGEREVENT_SELECTION(InputTrigger)); - - __HAL_LOCK(htim); - - if ((InputTrigger == TIM_TS_ITR0) || (InputTrigger == TIM_TS_ITR1) || - (InputTrigger == TIM_TS_ITR2) || (InputTrigger == TIM_TS_ITR3)) - { - /* Select the Input trigger */ - htim->Instance->SMCR &= ~TIM_SMCR_TS; - htim->Instance->SMCR |= InputTrigger; - } - - /* Select the Capture Compare preload feature */ - htim->Instance->CR2 |= TIM_CR2_CCPC; - /* Select the Commutation event source */ - htim->Instance->CR2 &= ~TIM_CR2_CCUS; - htim->Instance->CR2 |= CommutationSource; - - /* Disable Commutation DMA request */ - __HAL_TIM_DISABLE_DMA(htim, TIM_DMA_COM); - - /* Enable the Commutation Interrupt */ - __HAL_TIM_ENABLE_IT(htim, TIM_IT_COM); - - __HAL_UNLOCK(htim); - - return HAL_OK; -} - -/** - * @brief Configure the TIM commutation event sequence with DMA. - * @note This function is mandatory to use the commutation event in order to - * update the configuration at each commutation detection on the TRGI input of the Timer, - * the typical use of this feature is with the use of another Timer(interface Timer) - * configured in Hall sensor interface, this interface Timer will generate the - * commutation at its TRGO output (connected to Timer used in this function) each time - * the TI1 of the Interface Timer detect a commutation at its input TI1. - * @note The user should configure the DMA in his own software, in This function only the COMDE bit is set - * @param htim TIM handle - * @param InputTrigger the Internal trigger corresponding to the Timer Interfacing with the Hall sensor - * This parameter can be one of the following values: - * @arg TIM_TS_ITR0: Internal trigger 0 selected - * @arg TIM_TS_ITR1: Internal trigger 1 selected - * @arg TIM_TS_ITR2: Internal trigger 2 selected - * @arg TIM_TS_ITR3: Internal trigger 3 selected - * @arg TIM_TS_NONE: No trigger is needed - * @param CommutationSource the Commutation Event source - * This parameter can be one of the following values: - * @arg TIM_COMMUTATION_TRGI: Commutation source is the TRGI of the Interface Timer - * @arg TIM_COMMUTATION_SOFTWARE: Commutation source is set by software using the COMG bit - * @retval HAL status - */ -HAL_StatusTypeDef HAL_TIMEx_ConfigCommutEvent_DMA(TIM_HandleTypeDef *htim, uint32_t InputTrigger, uint32_t CommutationSource) -{ - /* Check the parameters */ - assert_param(IS_TIM_COMMUTATION_EVENT_INSTANCE(htim->Instance)); - assert_param(IS_TIM_INTERNAL_TRIGGEREVENT_SELECTION(InputTrigger)); - - __HAL_LOCK(htim); - - if ((InputTrigger == TIM_TS_ITR0) || (InputTrigger == TIM_TS_ITR1) || - (InputTrigger == TIM_TS_ITR2) || (InputTrigger == TIM_TS_ITR3)) - { - /* Select the Input trigger */ - htim->Instance->SMCR &= ~TIM_SMCR_TS; - htim->Instance->SMCR |= InputTrigger; - } - - /* Select the Capture Compare preload feature */ - htim->Instance->CR2 |= TIM_CR2_CCPC; - /* Select the Commutation event source */ - htim->Instance->CR2 &= ~TIM_CR2_CCUS; - htim->Instance->CR2 |= CommutationSource; - - /* Enable the Commutation DMA Request */ - /* Set the DMA Commutation Callback */ - htim->hdma[TIM_DMA_ID_COMMUTATION]->XferCpltCallback = TIMEx_DMACommutationCplt; - htim->hdma[TIM_DMA_ID_COMMUTATION]->XferHalfCpltCallback = TIMEx_DMACommutationHalfCplt; - /* Set the DMA error callback */ - htim->hdma[TIM_DMA_ID_COMMUTATION]->XferErrorCallback = TIM_DMAError; - - /* Disable Commutation Interrupt */ - __HAL_TIM_DISABLE_IT(htim, TIM_IT_COM); - - /* Enable the Commutation DMA Request */ - __HAL_TIM_ENABLE_DMA(htim, TIM_DMA_COM); - - __HAL_UNLOCK(htim); - - return HAL_OK; -} - -/** - * @brief Configures the TIM in master mode. - * @param htim TIM handle. - * @param sMasterConfig pointer to a TIM_MasterConfigTypeDef structure that - * contains the selected trigger output (TRGO) and the Master/Slave - * mode. - * @retval HAL status - */ -HAL_StatusTypeDef HAL_TIMEx_MasterConfigSynchronization(TIM_HandleTypeDef *htim, - TIM_MasterConfigTypeDef *sMasterConfig) -{ - uint32_t tmpcr2; - uint32_t tmpsmcr; - - /* Check the parameters */ - assert_param(IS_TIM_SYNCHRO_INSTANCE(htim->Instance)); - assert_param(IS_TIM_TRGO_SOURCE(sMasterConfig->MasterOutputTrigger)); - assert_param(IS_TIM_MSM_STATE(sMasterConfig->MasterSlaveMode)); - - /* Check input state */ - __HAL_LOCK(htim); - - /* Change the handler state */ - htim->State = HAL_TIM_STATE_BUSY; - - /* Get the TIMx CR2 register value */ - tmpcr2 = htim->Instance->CR2; - - /* Get the TIMx SMCR register value */ - tmpsmcr = htim->Instance->SMCR; - - /* If the timer supports ADC synchronization through TRGO2, set the master mode selection 2 */ - if (IS_TIM_TRGO2_INSTANCE(htim->Instance)) - { - /* Check the parameters */ - assert_param(IS_TIM_TRGO2_SOURCE(sMasterConfig->MasterOutputTrigger2)); - - /* Clear the MMS2 bits */ - tmpcr2 &= ~TIM_CR2_MMS2; - /* Select the TRGO2 source*/ - tmpcr2 |= sMasterConfig->MasterOutputTrigger2; - } - - /* Reset the MMS Bits */ - tmpcr2 &= ~TIM_CR2_MMS; - /* Select the TRGO source */ - tmpcr2 |= sMasterConfig->MasterOutputTrigger; - - /* Reset the MSM Bit */ - tmpsmcr &= ~TIM_SMCR_MSM; - /* Set master mode */ - tmpsmcr |= sMasterConfig->MasterSlaveMode; - - /* Update TIMx CR2 */ - htim->Instance->CR2 = tmpcr2; - - /* Update TIMx SMCR */ - htim->Instance->SMCR = tmpsmcr; - - /* Change the htim state */ - htim->State = HAL_TIM_STATE_READY; - - __HAL_UNLOCK(htim); - - return HAL_OK; -} - -/** - * @brief Configures the Break feature, dead time, Lock level, OSSI/OSSR State - * and the AOE(automatic output enable). - * @param htim TIM handle - * @param sBreakDeadTimeConfig pointer to a TIM_ConfigBreakDeadConfigTypeDef structure that - * contains the BDTR Register configuration information for the TIM peripheral. - * @retval HAL status - */ -HAL_StatusTypeDef HAL_TIMEx_ConfigBreakDeadTime(TIM_HandleTypeDef *htim, - TIM_BreakDeadTimeConfigTypeDef *sBreakDeadTimeConfig) -{ - /* Keep this variable initialized to 0 as it is used to configure BDTR register */ - uint32_t tmpbdtr = 0U; - - /* Check the parameters */ - assert_param(IS_TIM_BREAK_INSTANCE(htim->Instance)); - assert_param(IS_TIM_OSSR_STATE(sBreakDeadTimeConfig->OffStateRunMode)); - assert_param(IS_TIM_OSSI_STATE(sBreakDeadTimeConfig->OffStateIDLEMode)); - assert_param(IS_TIM_LOCK_LEVEL(sBreakDeadTimeConfig->LockLevel)); - assert_param(IS_TIM_DEADTIME(sBreakDeadTimeConfig->DeadTime)); - assert_param(IS_TIM_BREAK_STATE(sBreakDeadTimeConfig->BreakState)); - assert_param(IS_TIM_BREAK_POLARITY(sBreakDeadTimeConfig->BreakPolarity)); - assert_param(IS_TIM_BREAK_FILTER(sBreakDeadTimeConfig->BreakFilter)); - assert_param(IS_TIM_AUTOMATIC_OUTPUT_STATE(sBreakDeadTimeConfig->AutomaticOutput)); - - /* Check input state */ - __HAL_LOCK(htim); - - /* Set the Lock level, the Break enable Bit and the Polarity, the OSSR State, - the OSSI State, the dead time value and the Automatic Output Enable Bit */ - - /* Set the BDTR bits */ - MODIFY_REG(tmpbdtr, TIM_BDTR_DTG, sBreakDeadTimeConfig->DeadTime); - MODIFY_REG(tmpbdtr, TIM_BDTR_LOCK, sBreakDeadTimeConfig->LockLevel); - MODIFY_REG(tmpbdtr, TIM_BDTR_OSSI, sBreakDeadTimeConfig->OffStateIDLEMode); - MODIFY_REG(tmpbdtr, TIM_BDTR_OSSR, sBreakDeadTimeConfig->OffStateRunMode); - MODIFY_REG(tmpbdtr, TIM_BDTR_BKE, sBreakDeadTimeConfig->BreakState); - MODIFY_REG(tmpbdtr, TIM_BDTR_BKP, sBreakDeadTimeConfig->BreakPolarity); - MODIFY_REG(tmpbdtr, TIM_BDTR_AOE, sBreakDeadTimeConfig->AutomaticOutput); - MODIFY_REG(tmpbdtr, TIM_BDTR_BKF, (sBreakDeadTimeConfig->BreakFilter << TIM_BDTR_BKF_Pos)); - - if (IS_TIM_BKIN2_INSTANCE(htim->Instance)) - { - /* Check the parameters */ - assert_param(IS_TIM_BREAK2_STATE(sBreakDeadTimeConfig->Break2State)); - assert_param(IS_TIM_BREAK2_POLARITY(sBreakDeadTimeConfig->Break2Polarity)); - assert_param(IS_TIM_BREAK_FILTER(sBreakDeadTimeConfig->Break2Filter)); - - /* Set the BREAK2 input related BDTR bits */ - MODIFY_REG(tmpbdtr, TIM_BDTR_BK2F, (sBreakDeadTimeConfig->Break2Filter << TIM_BDTR_BK2F_Pos)); - MODIFY_REG(tmpbdtr, TIM_BDTR_BK2E, sBreakDeadTimeConfig->Break2State); - MODIFY_REG(tmpbdtr, TIM_BDTR_BK2P, sBreakDeadTimeConfig->Break2Polarity); - } - - /* Set TIMx_BDTR */ - htim->Instance->BDTR = tmpbdtr; - - __HAL_UNLOCK(htim); - - return HAL_OK; -} -#if defined(TIM_BREAK_INPUT_SUPPORT) - -/** - * @brief Configures the break input source. - * @param htim TIM handle. - * @param BreakInput Break input to configure - * This parameter can be one of the following values: - * @arg TIM_BREAKINPUT_BRK: Timer break input - * @arg TIM_BREAKINPUT_BRK2: Timer break 2 input - * @param sBreakInputConfig Break input source configuration - * @retval HAL status - */ -HAL_StatusTypeDef HAL_TIMEx_ConfigBreakInput(TIM_HandleTypeDef *htim, - uint32_t BreakInput, - TIMEx_BreakInputConfigTypeDef *sBreakInputConfig) - -{ - uint32_t tmporx; - uint32_t bkin_enable_mask = 0U; - uint32_t bkin_polarity_mask = 0U; - uint32_t bkin_enable_bitpos = 0U; - uint32_t bkin_polarity_bitpos = 0U; - - /* Check the parameters */ - assert_param(IS_TIM_BREAK_INSTANCE(htim->Instance)); - assert_param(IS_TIM_BREAKINPUT(BreakInput)); - assert_param(IS_TIM_BREAKINPUTSOURCE(sBreakInputConfig->Source)); - assert_param(IS_TIM_BREAKINPUTSOURCE_STATE(sBreakInputConfig->Enable)); -#if defined(DFSDM1_Channel0) - if (sBreakInputConfig->Source != TIM_BREAKINPUTSOURCE_DFSDM1) - { - assert_param(IS_TIM_BREAKINPUTSOURCE_POLARITY(sBreakInputConfig->Polarity)); - } -#else - assert_param(IS_TIM_BREAKINPUTSOURCE_POLARITY(sBreakInputConfig->Polarity)); -#endif /* DFSDM1_Channel0 */ - - /* Check input state */ - __HAL_LOCK(htim); - - switch (sBreakInputConfig->Source) - { - case TIM_BREAKINPUTSOURCE_BKIN: - { - bkin_enable_mask = TIM1_AF1_BKINE; - bkin_enable_bitpos = 0; - bkin_polarity_mask = TIM1_AF1_BKINP; - bkin_polarity_bitpos = 9; - break; - } - - case TIM_BREAKINPUTSOURCE_DFSDM1: - { - bkin_enable_mask = TIM1_AF1_BKDF1BKE; - bkin_enable_bitpos = 8; - break; - } - - default: - break; - } - - switch (BreakInput) - { - case TIM_BREAKINPUT_BRK: - { - /* Get the TIMx_AF1 register value */ - tmporx = htim->Instance->AF1; - - /* Enable the break input */ - tmporx &= ~bkin_enable_mask; - tmporx |= (sBreakInputConfig->Enable << bkin_enable_bitpos) & bkin_enable_mask; - - /* Set the break input polarity */ -#if defined(DFSDM1_Channel0) - if (sBreakInputConfig->Source != TIM_BREAKINPUTSOURCE_DFSDM1) -#endif /* DFSDM1_Channel0 */ - { - tmporx &= ~bkin_polarity_mask; - tmporx |= (sBreakInputConfig->Polarity << bkin_polarity_bitpos) & bkin_polarity_mask; - } - - /* Set TIMx_AF1 */ - htim->Instance->AF1 = tmporx; - break; - } - case TIM_BREAKINPUT_BRK2: - { - /* Get the TIMx_AF2 register value */ - tmporx = htim->Instance->AF2; - - /* Enable the break input */ - tmporx &= ~bkin_enable_mask; - tmporx |= (sBreakInputConfig->Enable << bkin_enable_bitpos) & bkin_enable_mask; - - /* Set the break input polarity */ -#if defined(DFSDM1_Channel0) - if (sBreakInputConfig->Source != TIM_BREAKINPUTSOURCE_DFSDM1) -#endif /* DFSDM1_Channel0 */ - { - tmporx &= ~bkin_polarity_mask; - tmporx |= (sBreakInputConfig->Polarity << bkin_polarity_bitpos) & bkin_polarity_mask; - } - - /* Set TIMx_AF2 */ - htim->Instance->AF2 = tmporx; - break; - } - default: - break; - } - - __HAL_UNLOCK(htim); - - return HAL_OK; -} -#endif /*TIM_BREAK_INPUT_SUPPORT */ - -/** - * @brief Configures the TIMx Remapping input capabilities. - * @param htim TIM handle. - * @param Remap specifies the TIM remapping source. - * This parameter can be one of the following values: - * @arg TIM_TIM2_TIM8_TRGO: TIM2 ITR1 input is connected to TIM8 Trigger output(default) - * @arg TIM_TIM2_ETH_PTP: TIM2 ITR1 input is connected to ETH PTP trigger output. - * @arg TIM_TIM2_USBFS_SOF: TIM2 ITR1 input is connected to USB FS SOF. - * @arg TIM_TIM2_USBHS_SOF: TIM2 ITR1 input is connected to USB HS SOF. - * @arg TIM_TIM5_GPIO: TIM5 CH4 input is connected to dedicated Timer pin(default) - * @arg TIM_TIM5_LSI: TIM5 CH4 input is connected to LSI clock. - * @arg TIM_TIM5_LSE: TIM5 CH4 input is connected to LSE clock. - * @arg TIM_TIM5_RTC: TIM5 CH4 input is connected to RTC Output event. - * @arg TIM_TIM11_GPIO: TIM11 CH4 input is connected to dedicated Timer pin(default) - * @arg TIM_TIM11_SPDIF: SPDIF Frame synchronous - * @arg TIM_TIM11_HSE: TIM11 CH4 input is connected to HSE_RTC clock - * (HSE divided by a programmable prescaler) - * @arg TIM_TIM11_MCO1: TIM11 CH1 input is connected to MCO1 - * - * @retval HAL status - */ -HAL_StatusTypeDef HAL_TIMEx_RemapConfig(TIM_HandleTypeDef *htim, uint32_t Remap) -{ - __HAL_LOCK(htim); - - /* Check parameters */ - assert_param(IS_TIM_REMAP_INSTANCE(htim->Instance)); - assert_param(IS_TIM_REMAP(Remap)); - - /* Set the Timer remapping configuration */ - htim->Instance->OR = Remap; - - htim->State = HAL_TIM_STATE_READY; - - __HAL_UNLOCK(htim); - - return HAL_OK; -} - -/** - * @brief Group channel 5 and channel 1, 2 or 3 - * @param htim TIM handle. - * @param Channels specifies the reference signal(s) the OC5REF is combined with. - * This parameter can be any combination of the following values: - * TIM_GROUPCH5_NONE: No effect of OC5REF on OC1REFC, OC2REFC and OC3REFC - * TIM_GROUPCH5_OC1REFC: OC1REFC is the logical AND of OC1REFC and OC5REF - * TIM_GROUPCH5_OC2REFC: OC2REFC is the logical AND of OC2REFC and OC5REF - * TIM_GROUPCH5_OC3REFC: OC3REFC is the logical AND of OC3REFC and OC5REF - * @retval HAL status - */ -HAL_StatusTypeDef HAL_TIMEx_GroupChannel5(TIM_HandleTypeDef *htim, uint32_t Channels) -{ - /* Check parameters */ - assert_param(IS_TIM_COMBINED3PHASEPWM_INSTANCE(htim->Instance)); - assert_param(IS_TIM_GROUPCH5(Channels)); - - /* Process Locked */ - __HAL_LOCK(htim); - - htim->State = HAL_TIM_STATE_BUSY; - - /* Clear GC5Cx bit fields */ - htim->Instance->CCR5 &= ~(TIM_CCR5_GC5C3 | TIM_CCR5_GC5C2 | TIM_CCR5_GC5C1); - - /* Set GC5Cx bit fields */ - htim->Instance->CCR5 |= Channels; - - /* Change the htim state */ - htim->State = HAL_TIM_STATE_READY; - - __HAL_UNLOCK(htim); - - return HAL_OK; -} - -/** - * @} - */ - -/** @defgroup TIMEx_Exported_Functions_Group6 Extended Callbacks functions - * @brief Extended Callbacks functions - * -@verbatim - ============================================================================== - ##### Extended Callbacks functions ##### - ============================================================================== - [..] - This section provides Extended TIM callback functions: - (+) Timer Commutation callback - (+) Timer Break callback - -@endverbatim - * @{ - */ - -/** - * @brief Hall commutation changed callback in non-blocking mode - * @param htim TIM handle - * @retval None - */ -__weak void HAL_TIMEx_CommutCallback(TIM_HandleTypeDef *htim) -{ - /* Prevent unused argument(s) compilation warning */ - UNUSED(htim); - - /* NOTE : This function should not be modified, when the callback is needed, - the HAL_TIMEx_CommutCallback could be implemented in the user file - */ -} -/** - * @brief Hall commutation changed half complete callback in non-blocking mode - * @param htim TIM handle - * @retval None - */ -__weak void HAL_TIMEx_CommutHalfCpltCallback(TIM_HandleTypeDef *htim) -{ - /* Prevent unused argument(s) compilation warning */ - UNUSED(htim); - - /* NOTE : This function should not be modified, when the callback is needed, - the HAL_TIMEx_CommutHalfCpltCallback could be implemented in the user file - */ -} - -/** - * @brief Hall Break detection callback in non-blocking mode - * @param htim TIM handle - * @retval None - */ -__weak void HAL_TIMEx_BreakCallback(TIM_HandleTypeDef *htim) -{ - /* Prevent unused argument(s) compilation warning */ - UNUSED(htim); - - /* NOTE : This function should not be modified, when the callback is needed, - the HAL_TIMEx_BreakCallback could be implemented in the user file - */ -} - -/** - * @brief Hall Break2 detection callback in non blocking mode - * @param htim: TIM handle - * @retval None - */ -__weak void HAL_TIMEx_Break2Callback(TIM_HandleTypeDef *htim) -{ - /* Prevent unused argument(s) compilation warning */ - UNUSED(htim); - - /* NOTE : This function Should not be modified, when the callback is needed, - the HAL_TIMEx_Break2Callback could be implemented in the user file - */ -} -/** - * @} - */ - -/** @defgroup TIMEx_Exported_Functions_Group7 Extended Peripheral State functions - * @brief Extended Peripheral State functions - * -@verbatim - ============================================================================== - ##### Extended Peripheral State functions ##### - ============================================================================== - [..] - This subsection permits to get in run-time the status of the peripheral - and the data flow. - -@endverbatim - * @{ - */ - -/** - * @brief Return the TIM Hall Sensor interface handle state. - * @param htim TIM Hall Sensor handle - * @retval HAL state - */ -HAL_TIM_StateTypeDef HAL_TIMEx_HallSensor_GetState(TIM_HandleTypeDef *htim) -{ - return htim->State; -} - -/** - * @} - */ - -/** - * @} - */ - -/* Private functions ---------------------------------------------------------*/ -/** @defgroup TIMEx_Private_Functions TIM Extended Private Functions - * @{ - */ - -/** - * @brief TIM DMA Commutation callback. - * @param hdma pointer to DMA handle. - * @retval None - */ -void TIMEx_DMACommutationCplt(DMA_HandleTypeDef *hdma) -{ - TIM_HandleTypeDef *htim = (TIM_HandleTypeDef *)((DMA_HandleTypeDef *)hdma)->Parent; - - /* Change the htim state */ - htim->State = HAL_TIM_STATE_READY; - -#if (USE_HAL_TIM_REGISTER_CALLBACKS == 1) - htim->CommutationCallback(htim); -#else - HAL_TIMEx_CommutCallback(htim); -#endif /* USE_HAL_TIM_REGISTER_CALLBACKS */ -} - -/** - * @brief TIM DMA Commutation half complete callback. - * @param hdma pointer to DMA handle. - * @retval None - */ -void TIMEx_DMACommutationHalfCplt(DMA_HandleTypeDef *hdma) -{ - TIM_HandleTypeDef *htim = (TIM_HandleTypeDef *)((DMA_HandleTypeDef *)hdma)->Parent; - - /* Change the htim state */ - htim->State = HAL_TIM_STATE_READY; - -#if (USE_HAL_TIM_REGISTER_CALLBACKS == 1) - htim->CommutationHalfCpltCallback(htim); -#else - HAL_TIMEx_CommutHalfCpltCallback(htim); -#endif /* USE_HAL_TIM_REGISTER_CALLBACKS */ -} - - -/** - * @brief Enables or disables the TIM Capture Compare Channel xN. - * @param TIMx to select the TIM peripheral - * @param Channel specifies the TIM Channel - * This parameter can be one of the following values: - * @arg TIM_CHANNEL_1: TIM Channel 1 - * @arg TIM_CHANNEL_2: TIM Channel 2 - * @arg TIM_CHANNEL_3: TIM Channel 3 - * @param ChannelNState specifies the TIM Channel CCxNE bit new state. - * This parameter can be: TIM_CCxN_ENABLE or TIM_CCxN_Disable. - * @retval None - */ -static void TIM_CCxNChannelCmd(TIM_TypeDef *TIMx, uint32_t Channel, uint32_t ChannelNState) -{ - uint32_t tmp; - - tmp = TIM_CCER_CC1NE << (Channel & 0x1FU); /* 0x1FU = 31 bits max shift */ - - /* Reset the CCxNE Bit */ - TIMx->CCER &= ~tmp; - - /* Set or reset the CCxNE Bit */ - TIMx->CCER |= (uint32_t)(ChannelNState << (Channel & 0x1FU)); /* 0x1FU = 31 bits max shift */ -} -/** - * @} - */ - -#endif /* HAL_TIM_MODULE_ENABLED */ -/** - * @} - */ - -/** - * @} - */ - -/************************ (C) COPYRIGHT STMicroelectronics *****END OF FILE****/ diff --git a/test_dma/Drivers/STM32F7xx_HAL_Driver/Src/stm32f7xx_hal_uart.c b/test_dma/Drivers/STM32F7xx_HAL_Driver/Src/stm32f7xx_hal_uart.c deleted file mode 100644 index 76efbf8..0000000 --- a/test_dma/Drivers/STM32F7xx_HAL_Driver/Src/stm32f7xx_hal_uart.c +++ /dev/null @@ -1,3471 +0,0 @@ -/** - ****************************************************************************** - * @file stm32f7xx_hal_uart.c - * @author MCD Application Team - * @brief UART HAL module driver. - * This file provides firmware functions to manage the following - * functionalities of the Universal Asynchronous Receiver Transmitter Peripheral (UART). - * + Initialization and de-initialization functions - * + IO operation functions - * + Peripheral Control functions - * - * - @verbatim - =============================================================================== - ##### How to use this driver ##### - =============================================================================== - [..] - The UART HAL driver can be used as follows: - - (#) Declare a UART_HandleTypeDef handle structure (eg. UART_HandleTypeDef huart). - (#) Initialize the UART low level resources by implementing the HAL_UART_MspInit() API: - (++) Enable the USARTx interface clock. - (++) UART pins configuration: - (+++) Enable the clock for the UART GPIOs. - (+++) Configure these UART pins as alternate function pull-up. - (++) NVIC configuration if you need to use interrupt process (HAL_UART_Transmit_IT() - and HAL_UART_Receive_IT() APIs): - (+++) Configure the USARTx interrupt priority. - (+++) Enable the NVIC USART IRQ handle. - (++) UART interrupts handling: - -@@- The specific UART interrupts (Transmission complete interrupt, - RXNE interrupt, RX/TX FIFOs related interrupts and Error Interrupts) - are managed using the macros __HAL_UART_ENABLE_IT() and __HAL_UART_DISABLE_IT() - inside the transmit and receive processes. - (++) DMA Configuration if you need to use DMA process (HAL_UART_Transmit_DMA() - and HAL_UART_Receive_DMA() APIs): - (+++) Declare a DMA handle structure for the Tx/Rx channel. - (+++) Enable the DMAx interface clock. - (+++) Configure the declared DMA handle structure with the required Tx/Rx parameters. - (+++) Configure the DMA Tx/Rx channel. - (+++) Associate the initialized DMA handle to the UART DMA Tx/Rx handle. - (+++) Configure the priority and enable the NVIC for the transfer complete interrupt on the DMA Tx/Rx channel. - - (#) Program the Baud Rate, Word Length, Stop Bit, Parity, Hardware - flow control and Mode (Receiver/Transmitter) in the huart handle Init structure. - - (#) If required, program UART advanced features (TX/RX pins swap, auto Baud rate detection,...) - in the huart handle AdvancedInit structure. - - (#) For the UART asynchronous mode, initialize the UART registers by calling - the HAL_UART_Init() API. - - (#) For the UART Half duplex mode, initialize the UART registers by calling - the HAL_HalfDuplex_Init() API. - - (#) For the UART LIN (Local Interconnection Network) mode, initialize the UART registers - by calling the HAL_LIN_Init() API. - - (#) For the UART Multiprocessor mode, initialize the UART registers - by calling the HAL_MultiProcessor_Init() API. - - (#) For the UART RS485 Driver Enabled mode, initialize the UART registers - by calling the HAL_RS485Ex_Init() API. - - [..] - (@) These API's (HAL_UART_Init(), HAL_HalfDuplex_Init(), HAL_LIN_Init(), HAL_MultiProcessor_Init(), - also configure the low level Hardware GPIO, CLOCK, CORTEX...etc) by - calling the customized HAL_UART_MspInit() API. - - ##### Callback registration ##### - ================================== - - [..] - The compilation define USE_HAL_UART_REGISTER_CALLBACKS when set to 1 - allows the user to configure dynamically the driver callbacks. - - [..] - Use Function @ref HAL_UART_RegisterCallback() to register a user callback. - Function @ref HAL_UART_RegisterCallback() allows to register following callbacks: - (+) TxHalfCpltCallback : Tx Half Complete Callback. - (+) TxCpltCallback : Tx Complete Callback. - (+) RxHalfCpltCallback : Rx Half Complete Callback. - (+) RxCpltCallback : Rx Complete Callback. - (+) ErrorCallback : Error Callback. - (+) AbortCpltCallback : Abort Complete Callback. - (+) AbortTransmitCpltCallback : Abort Transmit Complete Callback. - (+) AbortReceiveCpltCallback : Abort Receive Complete Callback. - (+) WakeupCallback : Wakeup Callback. - (+) RxFifoFullCallback : Rx Fifo Full Callback. - (+) TxFifoEmptyCallback : Tx Fifo Empty Callback. - (+) MspInitCallback : UART MspInit. - (+) MspDeInitCallback : UART MspDeInit. - This function takes as parameters the HAL peripheral handle, the Callback ID - and a pointer to the user callback function. - - [..] - Use function @ref HAL_UART_UnRegisterCallback() to reset a callback to the default - weak (surcharged) function. - @ref HAL_UART_UnRegisterCallback() takes as parameters the HAL peripheral handle, - and the Callback ID. - This function allows to reset following callbacks: - (+) TxHalfCpltCallback : Tx Half Complete Callback. - (+) TxCpltCallback : Tx Complete Callback. - (+) RxHalfCpltCallback : Rx Half Complete Callback. - (+) RxCpltCallback : Rx Complete Callback. - (+) ErrorCallback : Error Callback. - (+) AbortCpltCallback : Abort Complete Callback. - (+) AbortTransmitCpltCallback : Abort Transmit Complete Callback. - (+) AbortReceiveCpltCallback : Abort Receive Complete Callback. - (+) WakeupCallback : Wakeup Callback. - (+) RxFifoFullCallback : Rx Fifo Full Callback. - (+) TxFifoEmptyCallback : Tx Fifo Empty Callback. - (+) MspInitCallback : UART MspInit. - (+) MspDeInitCallback : UART MspDeInit. - - [..] - By default, after the @ref HAL_UART_Init() and when the state is HAL_UART_STATE_RESET - all callbacks are set to the corresponding weak (surcharged) functions: - examples @ref HAL_UART_TxCpltCallback(), @ref HAL_UART_RxHalfCpltCallback(). - Exception done for MspInit and MspDeInit functions that are respectively - reset to the legacy weak (surcharged) functions in the @ref HAL_UART_Init() - and @ref HAL_UART_DeInit() only when these callbacks are null (not registered beforehand). - If not, MspInit or MspDeInit are not null, the @ref HAL_UART_Init() and @ref HAL_UART_DeInit() - keep and use the user MspInit/MspDeInit callbacks (registered beforehand). - - [..] - Callbacks can be registered/unregistered in HAL_UART_STATE_READY state only. - Exception done MspInit/MspDeInit that can be registered/unregistered - in HAL_UART_STATE_READY or HAL_UART_STATE_RESET state, thus registered (user) - MspInit/DeInit callbacks can be used during the Init/DeInit. - In that case first register the MspInit/MspDeInit user callbacks - using @ref HAL_UART_RegisterCallback() before calling @ref HAL_UART_DeInit() - or @ref HAL_UART_Init() function. - - [..] - When The compilation define USE_HAL_UART_REGISTER_CALLBACKS is set to 0 or - not defined, the callback registration feature is not available - and weak (surcharged) callbacks are used. - - - @endverbatim - ****************************************************************************** - * @attention - * - *

© Copyright (c) 2017 STMicroelectronics. - * All rights reserved.

- * - * This software component is licensed by ST under BSD 3-Clause license, - * the "License"; You may not use this file except in compliance with the - * License. You may obtain a copy of the License at: - * opensource.org/licenses/BSD-3-Clause - * - ****************************************************************************** - */ - -/* Includes ------------------------------------------------------------------*/ -#include "stm32f7xx_hal.h" - -/** @addtogroup STM32F7xx_HAL_Driver - * @{ - */ - -/** @defgroup UART UART - * @brief HAL UART module driver - * @{ - */ - -#ifdef HAL_UART_MODULE_ENABLED - -/* Private typedef -----------------------------------------------------------*/ -/* Private define ------------------------------------------------------------*/ -/** @defgroup UART_Private_Constants UART Private Constants - * @{ - */ -#define USART_CR1_FIELDS ((uint32_t)(USART_CR1_M | USART_CR1_PCE | USART_CR1_PS | \ - USART_CR1_TE | USART_CR1_RE | USART_CR1_OVER8 )) /*!< UART or USART CR1 fields of parameters set by UART_SetConfig API */ - -#define USART_CR3_FIELDS ((uint32_t)(USART_CR3_RTSE | USART_CR3_CTSE | USART_CR3_ONEBIT)) /*!< UART or USART CR3 fields of parameters set by UART_SetConfig API */ - - -#define UART_BRR_MIN 0x10U /* UART BRR minimum authorized value */ -#define UART_BRR_MAX 0x0000FFFFU /* UART BRR maximum authorized value */ - -/** - * @} - */ - -/* Private macros ------------------------------------------------------------*/ -/* Private variables ---------------------------------------------------------*/ -/* Private function prototypes -----------------------------------------------*/ -/** @addtogroup UART_Private_Functions - * @{ - */ -static void UART_EndTxTransfer(UART_HandleTypeDef *huart); -static void UART_EndRxTransfer(UART_HandleTypeDef *huart); -static void UART_DMATransmitCplt(DMA_HandleTypeDef *hdma); -static void UART_DMAReceiveCplt(DMA_HandleTypeDef *hdma); -static void UART_DMARxHalfCplt(DMA_HandleTypeDef *hdma); -static void UART_DMATxHalfCplt(DMA_HandleTypeDef *hdma); -static void UART_DMAError(DMA_HandleTypeDef *hdma); -static void UART_DMAAbortOnError(DMA_HandleTypeDef *hdma); -static void UART_DMATxAbortCallback(DMA_HandleTypeDef *hdma); -static void UART_DMARxAbortCallback(DMA_HandleTypeDef *hdma); -static void UART_DMATxOnlyAbortCallback(DMA_HandleTypeDef *hdma); -static void UART_DMARxOnlyAbortCallback(DMA_HandleTypeDef *hdma); -static void UART_TxISR_8BIT(UART_HandleTypeDef *huart); -static void UART_TxISR_16BIT(UART_HandleTypeDef *huart); -static void UART_EndTransmit_IT(UART_HandleTypeDef *huart); -static void UART_RxISR_8BIT(UART_HandleTypeDef *huart); -static void UART_RxISR_16BIT(UART_HandleTypeDef *huart); -/** - * @} - */ - -/* Exported functions --------------------------------------------------------*/ - -/** @defgroup UART_Exported_Functions UART Exported Functions - * @{ - */ - -/** @defgroup UART_Exported_Functions_Group1 Initialization and de-initialization functions - * @brief Initialization and Configuration functions - * -@verbatim -=============================================================================== - ##### Initialization and Configuration functions ##### - =============================================================================== - [..] - This subsection provides a set of functions allowing to initialize the USARTx or the UARTy - in asynchronous mode. - (+) For the asynchronous mode the parameters below can be configured: - (++) Baud Rate - (++) Word Length - (++) Stop Bit - (++) Parity: If the parity is enabled, then the MSB bit of the data written - in the data register is transmitted but is changed by the parity bit. - (++) Hardware flow control - (++) Receiver/transmitter modes - (++) Over Sampling Method - (++) One-Bit Sampling Method - (+) For the asynchronous mode, the following advanced features can be configured as well: - (++) TX and/or RX pin level inversion - (++) data logical level inversion - (++) RX and TX pins swap - (++) RX overrun detection disabling - (++) DMA disabling on RX error - (++) MSB first on communication line - (++) auto Baud rate detection - [..] - The HAL_UART_Init(), HAL_HalfDuplex_Init(), HAL_LIN_Init()and HAL_MultiProcessor_Init()API - follow respectively the UART asynchronous, UART Half duplex, UART LIN mode - and UART multiprocessor mode configuration procedures (details for the procedures - are available in reference manual). - -@endverbatim - - Depending on the frame length defined by the M1 and M0 bits (7-bit, - 8-bit or 9-bit), the possible UART formats are listed in the - following table. - - Table 1. UART frame format. - +-----------------------------------------------------------------------+ - | M1 bit | M0 bit | PCE bit | UART frame | - |---------|---------|-----------|---------------------------------------| - | 0 | 0 | 0 | | SB | 8 bit data | STB | | - |---------|---------|-----------|---------------------------------------| - | 0 | 0 | 1 | | SB | 7 bit data | PB | STB | | - |---------|---------|-----------|---------------------------------------| - | 0 | 1 | 0 | | SB | 9 bit data | STB | | - |---------|---------|-----------|---------------------------------------| - | 0 | 1 | 1 | | SB | 8 bit data | PB | STB | | - |---------|---------|-----------|---------------------------------------| - | 1 | 0 | 0 | | SB | 7 bit data | STB | | - |---------|---------|-----------|---------------------------------------| - | 1 | 0 | 1 | | SB | 6 bit data | PB | STB | | - +-----------------------------------------------------------------------+ - - * @{ - */ - -/** - * @brief Initialize the UART mode according to the specified - * parameters in the UART_InitTypeDef and initialize the associated handle. - * @param huart UART handle. - * @retval HAL status - */ -HAL_StatusTypeDef HAL_UART_Init(UART_HandleTypeDef *huart) -{ - /* Check the UART handle allocation */ - if (huart == NULL) - { - return HAL_ERROR; - } - - if (huart->Init.HwFlowCtl != UART_HWCONTROL_NONE) - { - /* Check the parameters */ - assert_param(IS_UART_HWFLOW_INSTANCE(huart->Instance)); - } - else - { - /* Check the parameters */ - assert_param(IS_UART_INSTANCE(huart->Instance)); - } - - if (huart->gState == HAL_UART_STATE_RESET) - { - /* Allocate lock resource and initialize it */ - huart->Lock = HAL_UNLOCKED; - -#if (USE_HAL_UART_REGISTER_CALLBACKS == 1) - UART_InitCallbacksToDefault(huart); - - if (huart->MspInitCallback == NULL) - { - huart->MspInitCallback = HAL_UART_MspInit; - } - - /* Init the low level hardware */ - huart->MspInitCallback(huart); -#else - /* Init the low level hardware : GPIO, CLOCK */ - HAL_UART_MspInit(huart); -#endif /* (USE_HAL_UART_REGISTER_CALLBACKS) */ - } - - huart->gState = HAL_UART_STATE_BUSY; - - /* Disable the Peripheral */ - __HAL_UART_DISABLE(huart); - - /* Set the UART Communication parameters */ - if (UART_SetConfig(huart) == HAL_ERROR) - { - return HAL_ERROR; - } - - if (huart->AdvancedInit.AdvFeatureInit != UART_ADVFEATURE_NO_INIT) - { - UART_AdvFeatureConfig(huart); - } - - /* In asynchronous mode, the following bits must be kept cleared: - - LINEN and CLKEN bits in the USART_CR2 register, - - SCEN, HDSEL and IREN bits in the USART_CR3 register.*/ - CLEAR_BIT(huart->Instance->CR2, (USART_CR2_LINEN | USART_CR2_CLKEN)); - CLEAR_BIT(huart->Instance->CR3, (USART_CR3_SCEN | USART_CR3_HDSEL | USART_CR3_IREN)); - - /* Enable the Peripheral */ - __HAL_UART_ENABLE(huart); - - /* TEACK and/or REACK to check before moving huart->gState and huart->RxState to Ready */ - return (UART_CheckIdleState(huart)); -} - -/** - * @brief Initialize the half-duplex mode according to the specified - * parameters in the UART_InitTypeDef and creates the associated handle. - * @param huart UART handle. - * @retval HAL status - */ -HAL_StatusTypeDef HAL_HalfDuplex_Init(UART_HandleTypeDef *huart) -{ - /* Check the UART handle allocation */ - if (huart == NULL) - { - return HAL_ERROR; - } - - /* Check UART instance */ - assert_param(IS_UART_HALFDUPLEX_INSTANCE(huart->Instance)); - - if (huart->gState == HAL_UART_STATE_RESET) - { - /* Allocate lock resource and initialize it */ - huart->Lock = HAL_UNLOCKED; - -#if (USE_HAL_UART_REGISTER_CALLBACKS == 1) - UART_InitCallbacksToDefault(huart); - - if (huart->MspInitCallback == NULL) - { - huart->MspInitCallback = HAL_UART_MspInit; - } - - /* Init the low level hardware */ - huart->MspInitCallback(huart); -#else - /* Init the low level hardware : GPIO, CLOCK */ - HAL_UART_MspInit(huart); -#endif /* (USE_HAL_UART_REGISTER_CALLBACKS) */ - } - - huart->gState = HAL_UART_STATE_BUSY; - - /* Disable the Peripheral */ - __HAL_UART_DISABLE(huart); - - /* Set the UART Communication parameters */ - if (UART_SetConfig(huart) == HAL_ERROR) - { - return HAL_ERROR; - } - - if (huart->AdvancedInit.AdvFeatureInit != UART_ADVFEATURE_NO_INIT) - { - UART_AdvFeatureConfig(huart); - } - - /* In half-duplex mode, the following bits must be kept cleared: - - LINEN and CLKEN bits in the USART_CR2 register, - - SCEN and IREN bits in the USART_CR3 register.*/ - CLEAR_BIT(huart->Instance->CR2, (USART_CR2_LINEN | USART_CR2_CLKEN)); - CLEAR_BIT(huart->Instance->CR3, (USART_CR3_IREN | USART_CR3_SCEN)); - - /* Enable the Half-Duplex mode by setting the HDSEL bit in the CR3 register */ - SET_BIT(huart->Instance->CR3, USART_CR3_HDSEL); - - /* Enable the Peripheral */ - __HAL_UART_ENABLE(huart); - - /* TEACK and/or REACK to check before moving huart->gState and huart->RxState to Ready */ - return (UART_CheckIdleState(huart)); -} - - -/** - * @brief Initialize the LIN mode according to the specified - * parameters in the UART_InitTypeDef and creates the associated handle. - * @param huart UART handle. - * @param BreakDetectLength Specifies the LIN break detection length. - * This parameter can be one of the following values: - * @arg @ref UART_LINBREAKDETECTLENGTH_10B 10-bit break detection - * @arg @ref UART_LINBREAKDETECTLENGTH_11B 11-bit break detection - * @retval HAL status - */ -HAL_StatusTypeDef HAL_LIN_Init(UART_HandleTypeDef *huart, uint32_t BreakDetectLength) -{ - /* Check the UART handle allocation */ - if (huart == NULL) - { - return HAL_ERROR; - } - - /* Check the LIN UART instance */ - assert_param(IS_UART_LIN_INSTANCE(huart->Instance)); - /* Check the Break detection length parameter */ - assert_param(IS_UART_LIN_BREAK_DETECT_LENGTH(BreakDetectLength)); - - /* LIN mode limited to 16-bit oversampling only */ - if (huart->Init.OverSampling == UART_OVERSAMPLING_8) - { - return HAL_ERROR; - } - /* LIN mode limited to 8-bit data length */ - if (huart->Init.WordLength != UART_WORDLENGTH_8B) - { - return HAL_ERROR; - } - - if (huart->gState == HAL_UART_STATE_RESET) - { - /* Allocate lock resource and initialize it */ - huart->Lock = HAL_UNLOCKED; - -#if (USE_HAL_UART_REGISTER_CALLBACKS == 1) - UART_InitCallbacksToDefault(huart); - - if (huart->MspInitCallback == NULL) - { - huart->MspInitCallback = HAL_UART_MspInit; - } - - /* Init the low level hardware */ - huart->MspInitCallback(huart); -#else - /* Init the low level hardware : GPIO, CLOCK */ - HAL_UART_MspInit(huart); -#endif /* (USE_HAL_UART_REGISTER_CALLBACKS) */ - } - - huart->gState = HAL_UART_STATE_BUSY; - - /* Disable the Peripheral */ - __HAL_UART_DISABLE(huart); - - /* Set the UART Communication parameters */ - if (UART_SetConfig(huart) == HAL_ERROR) - { - return HAL_ERROR; - } - - if (huart->AdvancedInit.AdvFeatureInit != UART_ADVFEATURE_NO_INIT) - { - UART_AdvFeatureConfig(huart); - } - - /* In LIN mode, the following bits must be kept cleared: - - LINEN and CLKEN bits in the USART_CR2 register, - - SCEN and IREN bits in the USART_CR3 register.*/ - CLEAR_BIT(huart->Instance->CR2, USART_CR2_CLKEN); - CLEAR_BIT(huart->Instance->CR3, (USART_CR3_HDSEL | USART_CR3_IREN | USART_CR3_SCEN)); - - /* Enable the LIN mode by setting the LINEN bit in the CR2 register */ - SET_BIT(huart->Instance->CR2, USART_CR2_LINEN); - - /* Set the USART LIN Break detection length. */ - MODIFY_REG(huart->Instance->CR2, USART_CR2_LBDL, BreakDetectLength); - - /* Enable the Peripheral */ - __HAL_UART_ENABLE(huart); - - /* TEACK and/or REACK to check before moving huart->gState and huart->RxState to Ready */ - return (UART_CheckIdleState(huart)); -} - - -/** - * @brief Initialize the multiprocessor mode according to the specified - * parameters in the UART_InitTypeDef and initialize the associated handle. - * @param huart UART handle. - * @param Address UART node address (4-, 6-, 7- or 8-bit long). - * @param WakeUpMethod Specifies the UART wakeup method. - * This parameter can be one of the following values: - * @arg @ref UART_WAKEUPMETHOD_IDLELINE WakeUp by an idle line detection - * @arg @ref UART_WAKEUPMETHOD_ADDRESSMARK WakeUp by an address mark - * @note If the user resorts to idle line detection wake up, the Address parameter - * is useless and ignored by the initialization function. - * @note If the user resorts to address mark wake up, the address length detection - * is configured by default to 4 bits only. For the UART to be able to - * manage 6-, 7- or 8-bit long addresses detection, the API - * HAL_MultiProcessorEx_AddressLength_Set() must be called after - * HAL_MultiProcessor_Init(). - * @retval HAL status - */ -HAL_StatusTypeDef HAL_MultiProcessor_Init(UART_HandleTypeDef *huart, uint8_t Address, uint32_t WakeUpMethod) -{ - /* Check the UART handle allocation */ - if (huart == NULL) - { - return HAL_ERROR; - } - - /* Check the wake up method parameter */ - assert_param(IS_UART_WAKEUPMETHOD(WakeUpMethod)); - - if (huart->gState == HAL_UART_STATE_RESET) - { - /* Allocate lock resource and initialize it */ - huart->Lock = HAL_UNLOCKED; - -#if (USE_HAL_UART_REGISTER_CALLBACKS == 1) - UART_InitCallbacksToDefault(huart); - - if (huart->MspInitCallback == NULL) - { - huart->MspInitCallback = HAL_UART_MspInit; - } - - /* Init the low level hardware */ - huart->MspInitCallback(huart); -#else - /* Init the low level hardware : GPIO, CLOCK */ - HAL_UART_MspInit(huart); -#endif /* (USE_HAL_UART_REGISTER_CALLBACKS) */ - } - - huart->gState = HAL_UART_STATE_BUSY; - - /* Disable the Peripheral */ - __HAL_UART_DISABLE(huart); - - /* Set the UART Communication parameters */ - if (UART_SetConfig(huart) == HAL_ERROR) - { - return HAL_ERROR; - } - - if (huart->AdvancedInit.AdvFeatureInit != UART_ADVFEATURE_NO_INIT) - { - UART_AdvFeatureConfig(huart); - } - - /* In multiprocessor mode, the following bits must be kept cleared: - - LINEN and CLKEN bits in the USART_CR2 register, - - SCEN, HDSEL and IREN bits in the USART_CR3 register. */ - CLEAR_BIT(huart->Instance->CR2, (USART_CR2_LINEN | USART_CR2_CLKEN)); - CLEAR_BIT(huart->Instance->CR3, (USART_CR3_SCEN | USART_CR3_HDSEL | USART_CR3_IREN)); - - if (WakeUpMethod == UART_WAKEUPMETHOD_ADDRESSMARK) - { - /* If address mark wake up method is chosen, set the USART address node */ - MODIFY_REG(huart->Instance->CR2, USART_CR2_ADD, ((uint32_t)Address << UART_CR2_ADDRESS_LSB_POS)); - } - - /* Set the wake up method by setting the WAKE bit in the CR1 register */ - MODIFY_REG(huart->Instance->CR1, USART_CR1_WAKE, WakeUpMethod); - - /* Enable the Peripheral */ - __HAL_UART_ENABLE(huart); - - /* TEACK and/or REACK to check before moving huart->gState and huart->RxState to Ready */ - return (UART_CheckIdleState(huart)); -} - - -/** - * @brief DeInitialize the UART peripheral. - * @param huart UART handle. - * @retval HAL status - */ -HAL_StatusTypeDef HAL_UART_DeInit(UART_HandleTypeDef *huart) -{ - /* Check the UART handle allocation */ - if (huart == NULL) - { - return HAL_ERROR; - } - - /* Check the parameters */ - assert_param(IS_UART_INSTANCE(huart->Instance)); - - huart->gState = HAL_UART_STATE_BUSY; - - /* Disable the Peripheral */ - __HAL_UART_DISABLE(huart); - - huart->Instance->CR1 = 0x0U; - huart->Instance->CR2 = 0x0U; - huart->Instance->CR3 = 0x0U; - -#if (USE_HAL_UART_REGISTER_CALLBACKS == 1) - if (huart->MspDeInitCallback == NULL) - { - huart->MspDeInitCallback = HAL_UART_MspDeInit; - } - /* DeInit the low level hardware */ - huart->MspDeInitCallback(huart); -#else - /* DeInit the low level hardware */ - HAL_UART_MspDeInit(huart); -#endif /* (USE_HAL_UART_REGISTER_CALLBACKS) */ - - huart->ErrorCode = HAL_UART_ERROR_NONE; - huart->gState = HAL_UART_STATE_RESET; - huart->RxState = HAL_UART_STATE_RESET; - - /* Process Unlock */ - __HAL_UNLOCK(huart); - - return HAL_OK; -} - -/** - * @brief Initialize the UART MSP. - * @param huart UART handle. - * @retval None - */ -__weak void HAL_UART_MspInit(UART_HandleTypeDef *huart) -{ - /* Prevent unused argument(s) compilation warning */ - UNUSED(huart); - - /* NOTE : This function should not be modified, when the callback is needed, - the HAL_UART_MspInit can be implemented in the user file - */ -} - -/** - * @brief DeInitialize the UART MSP. - * @param huart UART handle. - * @retval None - */ -__weak void HAL_UART_MspDeInit(UART_HandleTypeDef *huart) -{ - /* Prevent unused argument(s) compilation warning */ - UNUSED(huart); - - /* NOTE : This function should not be modified, when the callback is needed, - the HAL_UART_MspDeInit can be implemented in the user file - */ -} - -#if (USE_HAL_UART_REGISTER_CALLBACKS == 1) -/** - * @brief Register a User UART Callback - * To be used instead of the weak predefined callback - * @param huart uart handle - * @param CallbackID ID of the callback to be registered - * This parameter can be one of the following values: - * @arg @ref HAL_UART_TX_HALFCOMPLETE_CB_ID Tx Half Complete Callback ID - * @arg @ref HAL_UART_TX_COMPLETE_CB_ID Tx Complete Callback ID - * @arg @ref HAL_UART_RX_HALFCOMPLETE_CB_ID Rx Half Complete Callback ID - * @arg @ref HAL_UART_RX_COMPLETE_CB_ID Rx Complete Callback ID - * @arg @ref HAL_UART_ERROR_CB_ID Error Callback ID - * @arg @ref HAL_UART_ABORT_COMPLETE_CB_ID Abort Complete Callback ID - * @arg @ref HAL_UART_ABORT_TRANSMIT_COMPLETE_CB_ID Abort Transmit Complete Callback ID - * @arg @ref HAL_UART_ABORT_RECEIVE_COMPLETE_CB_ID Abort Receive Complete Callback ID - * @arg @ref HAL_UART_WAKEUP_CB_ID Wakeup Callback ID - * @arg @ref HAL_UART_RX_FIFO_FULL_CB_ID Rx Fifo Full Callback ID - * @arg @ref HAL_UART_TX_FIFO_EMPTY_CB_ID Tx Fifo Empty Callback ID - * @arg @ref HAL_UART_MSPINIT_CB_ID MspInit Callback ID - * @arg @ref HAL_UART_MSPDEINIT_CB_ID MspDeInit Callback ID - * @param pCallback pointer to the Callback function - * @retval HAL status - */ -HAL_StatusTypeDef HAL_UART_RegisterCallback(UART_HandleTypeDef *huart, HAL_UART_CallbackIDTypeDef CallbackID, pUART_CallbackTypeDef pCallback) -{ - HAL_StatusTypeDef status = HAL_OK; - - if (pCallback == NULL) - { - /* Update the error code */ - huart->ErrorCode |= HAL_UART_ERROR_INVALID_CALLBACK; - - return HAL_ERROR; - } - /* Process locked */ - __HAL_LOCK(huart); - - if (huart->gState == HAL_UART_STATE_READY) - { - switch (CallbackID) - { - case HAL_UART_TX_HALFCOMPLETE_CB_ID : - huart->TxHalfCpltCallback = pCallback; - break; - - case HAL_UART_TX_COMPLETE_CB_ID : - huart->TxCpltCallback = pCallback; - break; - - case HAL_UART_RX_HALFCOMPLETE_CB_ID : - huart->RxHalfCpltCallback = pCallback; - break; - - case HAL_UART_RX_COMPLETE_CB_ID : - huart->RxCpltCallback = pCallback; - break; - - case HAL_UART_ERROR_CB_ID : - huart->ErrorCallback = pCallback; - break; - - case HAL_UART_ABORT_COMPLETE_CB_ID : - huart->AbortCpltCallback = pCallback; - break; - - case HAL_UART_ABORT_TRANSMIT_COMPLETE_CB_ID : - huart->AbortTransmitCpltCallback = pCallback; - break; - - case HAL_UART_ABORT_RECEIVE_COMPLETE_CB_ID : - huart->AbortReceiveCpltCallback = pCallback; - break; - - case HAL_UART_WAKEUP_CB_ID : - huart->WakeupCallback = pCallback; - break; - - - case HAL_UART_MSPINIT_CB_ID : - huart->MspInitCallback = pCallback; - break; - - case HAL_UART_MSPDEINIT_CB_ID : - huart->MspDeInitCallback = pCallback; - break; - - default : - /* Update the error code */ - huart->ErrorCode |= HAL_UART_ERROR_INVALID_CALLBACK; - - /* Return error status */ - status = HAL_ERROR; - break; - } - } - else if (huart->gState == HAL_UART_STATE_RESET) - { - switch (CallbackID) - { - case HAL_UART_MSPINIT_CB_ID : - huart->MspInitCallback = pCallback; - break; - - case HAL_UART_MSPDEINIT_CB_ID : - huart->MspDeInitCallback = pCallback; - break; - - default : - /* Update the error code */ - huart->ErrorCode |= HAL_UART_ERROR_INVALID_CALLBACK; - - /* Return error status */ - status = HAL_ERROR; - break; - } - } - else - { - /* Update the error code */ - huart->ErrorCode |= HAL_UART_ERROR_INVALID_CALLBACK; - - /* Return error status */ - status = HAL_ERROR; - } - - /* Release Lock */ - __HAL_UNLOCK(huart); - - return status; -} - -/** - * @brief Unregister an UART Callback - * UART callaback is redirected to the weak predefined callback - * @param huart uart handle - * @param CallbackID ID of the callback to be unregistered - * This parameter can be one of the following values: - * @arg @ref HAL_UART_TX_HALFCOMPLETE_CB_ID Tx Half Complete Callback ID - * @arg @ref HAL_UART_TX_COMPLETE_CB_ID Tx Complete Callback ID - * @arg @ref HAL_UART_RX_HALFCOMPLETE_CB_ID Rx Half Complete Callback ID - * @arg @ref HAL_UART_RX_COMPLETE_CB_ID Rx Complete Callback ID - * @arg @ref HAL_UART_ERROR_CB_ID Error Callback ID - * @arg @ref HAL_UART_ABORT_COMPLETE_CB_ID Abort Complete Callback ID - * @arg @ref HAL_UART_ABORT_TRANSMIT_COMPLETE_CB_ID Abort Transmit Complete Callback ID - * @arg @ref HAL_UART_ABORT_RECEIVE_COMPLETE_CB_ID Abort Receive Complete Callback ID - * @arg @ref HAL_UART_WAKEUP_CB_ID Wakeup Callback ID - * @arg @ref HAL_UART_RX_FIFO_FULL_CB_ID Rx Fifo Full Callback ID - * @arg @ref HAL_UART_TX_FIFO_EMPTY_CB_ID Tx Fifo Empty Callback ID - * @arg @ref HAL_UART_MSPINIT_CB_ID MspInit Callback ID - * @arg @ref HAL_UART_MSPDEINIT_CB_ID MspDeInit Callback ID - * @retval HAL status - */ -HAL_StatusTypeDef HAL_UART_UnRegisterCallback(UART_HandleTypeDef *huart, HAL_UART_CallbackIDTypeDef CallbackID) -{ - HAL_StatusTypeDef status = HAL_OK; - - /* Process locked */ - __HAL_LOCK(huart); - - if (HAL_UART_STATE_READY == huart->gState) - { - switch (CallbackID) - { - case HAL_UART_TX_HALFCOMPLETE_CB_ID : - huart->TxHalfCpltCallback = HAL_UART_TxHalfCpltCallback; /* Legacy weak TxHalfCpltCallback */ - break; - - case HAL_UART_TX_COMPLETE_CB_ID : - huart->TxCpltCallback = HAL_UART_TxCpltCallback; /* Legacy weak TxCpltCallback */ - break; - - case HAL_UART_RX_HALFCOMPLETE_CB_ID : - huart->RxHalfCpltCallback = HAL_UART_RxHalfCpltCallback; /* Legacy weak RxHalfCpltCallback */ - break; - - case HAL_UART_RX_COMPLETE_CB_ID : - huart->RxCpltCallback = HAL_UART_RxCpltCallback; /* Legacy weak RxCpltCallback */ - break; - - case HAL_UART_ERROR_CB_ID : - huart->ErrorCallback = HAL_UART_ErrorCallback; /* Legacy weak ErrorCallback */ - break; - - case HAL_UART_ABORT_COMPLETE_CB_ID : - huart->AbortCpltCallback = HAL_UART_AbortCpltCallback; /* Legacy weak AbortCpltCallback */ - break; - - case HAL_UART_ABORT_TRANSMIT_COMPLETE_CB_ID : - huart->AbortTransmitCpltCallback = HAL_UART_AbortTransmitCpltCallback; /* Legacy weak AbortTransmitCpltCallback */ - break; - - case HAL_UART_ABORT_RECEIVE_COMPLETE_CB_ID : - huart->AbortReceiveCpltCallback = HAL_UART_AbortReceiveCpltCallback; /* Legacy weak AbortReceiveCpltCallback */ - break; - - case HAL_UART_MSPINIT_CB_ID : - huart->MspInitCallback = HAL_UART_MspInit; /* Legacy weak MspInitCallback */ - break; - - case HAL_UART_MSPDEINIT_CB_ID : - huart->MspDeInitCallback = HAL_UART_MspDeInit; /* Legacy weak MspDeInitCallback */ - break; - - default : - /* Update the error code */ - huart->ErrorCode |= HAL_UART_ERROR_INVALID_CALLBACK; - - /* Return error status */ - status = HAL_ERROR; - break; - } - } - else if (HAL_UART_STATE_RESET == huart->gState) - { - switch (CallbackID) - { - case HAL_UART_MSPINIT_CB_ID : - huart->MspInitCallback = HAL_UART_MspInit; - break; - - case HAL_UART_MSPDEINIT_CB_ID : - huart->MspDeInitCallback = HAL_UART_MspDeInit; - break; - - default : - /* Update the error code */ - huart->ErrorCode |= HAL_UART_ERROR_INVALID_CALLBACK; - - /* Return error status */ - status = HAL_ERROR; - break; - } - } - else - { - /* Update the error code */ - huart->ErrorCode |= HAL_UART_ERROR_INVALID_CALLBACK; - - /* Return error status */ - status = HAL_ERROR; - } - - /* Release Lock */ - __HAL_UNLOCK(huart); - - return status; -} -#endif /* USE_HAL_UART_REGISTER_CALLBACKS */ - -/** - * @} - */ - -/** @defgroup UART_Exported_Functions_Group2 IO operation functions - * @brief UART Transmit/Receive functions - * -@verbatim - =============================================================================== - ##### IO operation functions ##### - =============================================================================== - This subsection provides a set of functions allowing to manage the UART asynchronous - and Half duplex data transfers. - - (#) There are two mode of transfer: - (+) Blocking mode: The communication is performed in polling mode. - The HAL status of all data processing is returned by the same function - after finishing transfer. - (+) Non-Blocking mode: The communication is performed using Interrupts - or DMA, These API's return the HAL status. - The end of the data processing will be indicated through the - dedicated UART IRQ when using Interrupt mode or the DMA IRQ when - using DMA mode. - The HAL_UART_TxCpltCallback(), HAL_UART_RxCpltCallback() user callbacks - will be executed respectively at the end of the transmit or Receive process - The HAL_UART_ErrorCallback()user callback will be executed when a communication error is detected - - (#) Blocking mode API's are : - (+) HAL_UART_Transmit() - (+) HAL_UART_Receive() - - (#) Non-Blocking mode API's with Interrupt are : - (+) HAL_UART_Transmit_IT() - (+) HAL_UART_Receive_IT() - (+) HAL_UART_IRQHandler() - - (#) Non-Blocking mode API's with DMA are : - (+) HAL_UART_Transmit_DMA() - (+) HAL_UART_Receive_DMA() - (+) HAL_UART_DMAPause() - (+) HAL_UART_DMAResume() - (+) HAL_UART_DMAStop() - - (#) A set of Transfer Complete Callbacks are provided in Non_Blocking mode: - (+) HAL_UART_TxHalfCpltCallback() - (+) HAL_UART_TxCpltCallback() - (+) HAL_UART_RxHalfCpltCallback() - (+) HAL_UART_RxCpltCallback() - (+) HAL_UART_ErrorCallback() - - (#) Non-Blocking mode transfers could be aborted using Abort API's : - (+) HAL_UART_Abort() - (+) HAL_UART_AbortTransmit() - (+) HAL_UART_AbortReceive() - (+) HAL_UART_Abort_IT() - (+) HAL_UART_AbortTransmit_IT() - (+) HAL_UART_AbortReceive_IT() - - (#) For Abort services based on interrupts (HAL_UART_Abortxxx_IT), a set of Abort Complete Callbacks are provided: - (+) HAL_UART_AbortCpltCallback() - (+) HAL_UART_AbortTransmitCpltCallback() - (+) HAL_UART_AbortReceiveCpltCallback() - - (#) In Non-Blocking mode transfers, possible errors are split into 2 categories. - Errors are handled as follows : - (+) Error is considered as Recoverable and non blocking : Transfer could go till end, but error severity is - to be evaluated by user : this concerns Frame Error, Parity Error or Noise Error in Interrupt mode reception . - Received character is then retrieved and stored in Rx buffer, Error code is set to allow user to identify error type, - and HAL_UART_ErrorCallback() user callback is executed. Transfer is kept ongoing on UART side. - If user wants to abort it, Abort services should be called by user. - (+) Error is considered as Blocking : Transfer could not be completed properly and is aborted. - This concerns Overrun Error In Interrupt mode reception and all errors in DMA mode. - Error code is set to allow user to identify error type, and HAL_UART_ErrorCallback() user callback is executed. - - -@- In the Half duplex communication, it is forbidden to run the transmit - and receive process in parallel, the UART state HAL_UART_STATE_BUSY_TX_RX can't be useful. - -@endverbatim - * @{ - */ - -/** - * @brief Send an amount of data in blocking mode. - * @param huart UART handle. - * @param pData Pointer to data buffer. - * @param Size Amount of data to be sent. - * @param Timeout Timeout duration. - * @retval HAL status - */ -HAL_StatusTypeDef HAL_UART_Transmit(UART_HandleTypeDef *huart, uint8_t *pData, uint16_t Size, uint32_t Timeout) -{ - uint8_t *pdata8bits; - uint16_t *pdata16bits; - uint32_t tickstart; - - /* Check that a Tx process is not already ongoing */ - if (huart->gState == HAL_UART_STATE_READY) - { - if ((pData == NULL) || (Size == 0U)) - { - return HAL_ERROR; - } - - /* Process Locked */ - __HAL_LOCK(huart); - - huart->ErrorCode = HAL_UART_ERROR_NONE; - huart->gState = HAL_UART_STATE_BUSY_TX; - - /* Init tickstart for timeout managment*/ - tickstart = HAL_GetTick(); - - huart->TxXferSize = Size; - huart->TxXferCount = Size; - - /* In case of 9bits/No Parity transfer, pData needs to be handled as a uint16_t pointer */ - if ((huart->Init.WordLength == UART_WORDLENGTH_9B) && (huart->Init.Parity == UART_PARITY_NONE)) - { - pdata8bits = NULL; - pdata16bits = (uint16_t *) pData; - } - else - { - pdata8bits = pData; - pdata16bits = NULL; - } - - while (huart->TxXferCount > 0U) - { - if (UART_WaitOnFlagUntilTimeout(huart, UART_FLAG_TXE, RESET, tickstart, Timeout) != HAL_OK) - { - return HAL_TIMEOUT; - } - if (pdata8bits == NULL) - { - huart->Instance->TDR = (uint16_t)(*pdata16bits & 0x01FFU); - pdata16bits++; - } - else - { - huart->Instance->TDR = (uint8_t)(*pdata8bits & 0xFFU); - pdata8bits++; - } - huart->TxXferCount--; - } - - if (UART_WaitOnFlagUntilTimeout(huart, UART_FLAG_TC, RESET, tickstart, Timeout) != HAL_OK) - { - return HAL_TIMEOUT; - } - - /* At end of Tx process, restore huart->gState to Ready */ - huart->gState = HAL_UART_STATE_READY; - - /* Process Unlocked */ - __HAL_UNLOCK(huart); - - return HAL_OK; - } - else - { - return HAL_BUSY; - } -} - -/** - * @brief Receive an amount of data in blocking mode. - * @param huart UART handle. - * @param pData Pointer to data buffer. - * @param Size Amount of data to be received. - * @param Timeout Timeout duration. - * @retval HAL status - */ -HAL_StatusTypeDef HAL_UART_Receive(UART_HandleTypeDef *huart, uint8_t *pData, uint16_t Size, uint32_t Timeout) -{ - uint8_t *pdata8bits; - uint16_t *pdata16bits; - uint16_t uhMask; - uint32_t tickstart; - - /* Check that a Rx process is not already ongoing */ - if (huart->RxState == HAL_UART_STATE_READY) - { - if ((pData == NULL) || (Size == 0U)) - { - return HAL_ERROR; - } - - /* Process Locked */ - __HAL_LOCK(huart); - - huart->ErrorCode = HAL_UART_ERROR_NONE; - huart->RxState = HAL_UART_STATE_BUSY_RX; - - /* Init tickstart for timeout managment*/ - tickstart = HAL_GetTick(); - - huart->RxXferSize = Size; - huart->RxXferCount = Size; - - /* Computation of UART mask to apply to RDR register */ - UART_MASK_COMPUTATION(huart); - uhMask = huart->Mask; - - /* In case of 9bits/No Parity transfer, pRxData needs to be handled as a uint16_t pointer */ - if ((huart->Init.WordLength == UART_WORDLENGTH_9B) && (huart->Init.Parity == UART_PARITY_NONE)) - { - pdata8bits = NULL; - pdata16bits = (uint16_t *) pData; - } - else - { - pdata8bits = pData; - pdata16bits = NULL; - } - - /* as long as data have to be received */ - while (huart->RxXferCount > 0U) - { - if (UART_WaitOnFlagUntilTimeout(huart, UART_FLAG_RXNE, RESET, tickstart, Timeout) != HAL_OK) - { - return HAL_TIMEOUT; - } - if (pdata8bits == NULL) - { - *pdata16bits = (uint16_t)(huart->Instance->RDR & uhMask); - pdata16bits++; - } - else - { - *pdata8bits = (uint8_t)(huart->Instance->RDR & (uint8_t)uhMask); - pdata8bits++; - } - huart->RxXferCount--; - } - - /* At end of Rx process, restore huart->RxState to Ready */ - huart->RxState = HAL_UART_STATE_READY; - - /* Process Unlocked */ - __HAL_UNLOCK(huart); - - return HAL_OK; - } - else - { - return HAL_BUSY; - } -} - -/** - * @brief Send an amount of data in interrupt mode. - * @param huart UART handle. - * @param pData Pointer to data buffer. - * @param Size Amount of data to be sent. - * @retval HAL status - */ -HAL_StatusTypeDef HAL_UART_Transmit_IT(UART_HandleTypeDef *huart, uint8_t *pData, uint16_t Size) -{ - /* Check that a Tx process is not already ongoing */ - if (huart->gState == HAL_UART_STATE_READY) - { - if ((pData == NULL) || (Size == 0U)) - { - return HAL_ERROR; - } - - /* Process Locked */ - __HAL_LOCK(huart); - - huart->pTxBuffPtr = pData; - huart->TxXferSize = Size; - huart->TxXferCount = Size; - huart->TxISR = NULL; - - huart->ErrorCode = HAL_UART_ERROR_NONE; - huart->gState = HAL_UART_STATE_BUSY_TX; - - /* Set the Tx ISR function pointer according to the data word length */ - if ((huart->Init.WordLength == UART_WORDLENGTH_9B) && (huart->Init.Parity == UART_PARITY_NONE)) - { - huart->TxISR = UART_TxISR_16BIT; - } - else - { - huart->TxISR = UART_TxISR_8BIT; - } - - /* Process Unlocked */ - __HAL_UNLOCK(huart); - - /* Enable the Transmit Data Register Empty interrupt */ - SET_BIT(huart->Instance->CR1, USART_CR1_TXEIE); - - return HAL_OK; - } - else - { - return HAL_BUSY; - } -} - -/** - * @brief Receive an amount of data in interrupt mode. - * @param huart UART handle. - * @param pData Pointer to data buffer. - * @param Size Amount of data to be received. - * @retval HAL status - */ -HAL_StatusTypeDef HAL_UART_Receive_IT(UART_HandleTypeDef *huart, uint8_t *pData, uint16_t Size) -{ - /* Check that a Rx process is not already ongoing */ - if (huart->RxState == HAL_UART_STATE_READY) - { - if ((pData == NULL) || (Size == 0U)) - { - return HAL_ERROR; - } - - /* Process Locked */ - __HAL_LOCK(huart); - - huart->pRxBuffPtr = pData; - huart->RxXferSize = Size; - huart->RxXferCount = Size; - huart->RxISR = NULL; - - /* Computation of UART mask to apply to RDR register */ - UART_MASK_COMPUTATION(huart); - - huart->ErrorCode = HAL_UART_ERROR_NONE; - huart->RxState = HAL_UART_STATE_BUSY_RX; - - /* Enable the UART Error Interrupt: (Frame error, noise error, overrun error) */ - SET_BIT(huart->Instance->CR3, USART_CR3_EIE); - - /* Set the Rx ISR function pointer according to the data word length */ - if ((huart->Init.WordLength == UART_WORDLENGTH_9B) && (huart->Init.Parity == UART_PARITY_NONE)) - { - huart->RxISR = UART_RxISR_16BIT; - } - else - { - huart->RxISR = UART_RxISR_8BIT; - } - - /* Process Unlocked */ - __HAL_UNLOCK(huart); - - /* Enable the UART Parity Error interrupt and Data Register Not Empty interrupt */ - SET_BIT(huart->Instance->CR1, USART_CR1_PEIE | USART_CR1_RXNEIE); - - return HAL_OK; - } - else - { - return HAL_BUSY; - } -} - -/** - * @brief Send an amount of data in DMA mode. - * @param huart UART handle. - * @param pData Pointer to data buffer. - * @param Size Amount of data to be sent. - * @retval HAL status - */ -HAL_StatusTypeDef HAL_UART_Transmit_DMA(UART_HandleTypeDef *huart, uint8_t *pData, uint16_t Size) -{ - /* Check that a Tx process is not already ongoing */ - if (huart->gState == HAL_UART_STATE_READY) - { - if ((pData == NULL) || (Size == 0U)) - { - return HAL_ERROR; - } - - /* Process Locked */ - __HAL_LOCK(huart); - - huart->pTxBuffPtr = pData; - huart->TxXferSize = Size; - huart->TxXferCount = Size; - - huart->ErrorCode = HAL_UART_ERROR_NONE; - huart->gState = HAL_UART_STATE_BUSY_TX; - - if (huart->hdmatx != NULL) - { - /* Set the UART DMA transfer complete callback */ - huart->hdmatx->XferCpltCallback = UART_DMATransmitCplt; - - /* Set the UART DMA Half transfer complete callback */ - huart->hdmatx->XferHalfCpltCallback = UART_DMATxHalfCplt; - - /* Set the DMA error callback */ - huart->hdmatx->XferErrorCallback = UART_DMAError; - - /* Set the DMA abort callback */ - huart->hdmatx->XferAbortCallback = NULL; - - /* Enable the UART transmit DMA channel */ - if (HAL_DMA_Start_IT(huart->hdmatx, (uint32_t)huart->pTxBuffPtr, (uint32_t)&huart->Instance->TDR, Size) != HAL_OK) - { - /* Set error code to DMA */ - huart->ErrorCode = HAL_UART_ERROR_DMA; - - /* Process Unlocked */ - __HAL_UNLOCK(huart); - - /* Restore huart->gState to ready */ - huart->gState = HAL_UART_STATE_READY; - - return HAL_ERROR; - } - } - /* Clear the TC flag in the ICR register */ - __HAL_UART_CLEAR_FLAG(huart, UART_CLEAR_TCF); - - /* Process Unlocked */ - __HAL_UNLOCK(huart); - - /* Enable the DMA transfer for transmit request by setting the DMAT bit - in the UART CR3 register */ - SET_BIT(huart->Instance->CR3, USART_CR3_DMAT); - - return HAL_OK; - } - else - { - return HAL_BUSY; - } -} - -/** - * @brief Receive an amount of data in DMA mode. - * @note When the UART parity is enabled (PCE = 1), the received data contain - * the parity bit (MSB position). - * @param huart UART handle. - * @param pData Pointer to data buffer. - * @param Size Amount of data to be received. - * @retval HAL status - */ -HAL_StatusTypeDef HAL_UART_Receive_DMA(UART_HandleTypeDef *huart, uint8_t *pData, uint16_t Size) -{ - /* Check that a Rx process is not already ongoing */ - if (huart->RxState == HAL_UART_STATE_READY) - { - if ((pData == NULL) || (Size == 0U)) - { - return HAL_ERROR; - } - - /* Process Locked */ - __HAL_LOCK(huart); - - huart->pRxBuffPtr = pData; - huart->RxXferSize = Size; - - huart->ErrorCode = HAL_UART_ERROR_NONE; - huart->RxState = HAL_UART_STATE_BUSY_RX; - - if (huart->hdmarx != NULL) - { - /* Set the UART DMA transfer complete callback */ - huart->hdmarx->XferCpltCallback = UART_DMAReceiveCplt; - - /* Set the UART DMA Half transfer complete callback */ - huart->hdmarx->XferHalfCpltCallback = UART_DMARxHalfCplt; - - /* Set the DMA error callback */ - huart->hdmarx->XferErrorCallback = UART_DMAError; - - /* Set the DMA abort callback */ - huart->hdmarx->XferAbortCallback = NULL; - - /* Enable the DMA channel */ - if (HAL_DMA_Start_IT(huart->hdmarx, (uint32_t)&huart->Instance->RDR, (uint32_t)huart->pRxBuffPtr, Size) != HAL_OK) - { - /* Set error code to DMA */ - huart->ErrorCode = HAL_UART_ERROR_DMA; - - /* Process Unlocked */ - __HAL_UNLOCK(huart); - - /* Restore huart->gState to ready */ - huart->gState = HAL_UART_STATE_READY; - - return HAL_ERROR; - } - } - /* Process Unlocked */ - __HAL_UNLOCK(huart); - - /* Enable the UART Parity Error Interrupt */ - SET_BIT(huart->Instance->CR1, USART_CR1_PEIE); - - /* Enable the UART Error Interrupt: (Frame error, noise error, overrun error) */ - SET_BIT(huart->Instance->CR3, USART_CR3_EIE); - - /* Enable the DMA transfer for the receiver request by setting the DMAR bit - in the UART CR3 register */ - SET_BIT(huart->Instance->CR3, USART_CR3_DMAR); - - return HAL_OK; - } - else - { - return HAL_BUSY; - } -} - -/** - * @brief Pause the DMA Transfer. - * @param huart UART handle. - * @retval HAL status - */ -HAL_StatusTypeDef HAL_UART_DMAPause(UART_HandleTypeDef *huart) -{ - const HAL_UART_StateTypeDef gstate = huart->gState; - const HAL_UART_StateTypeDef rxstate = huart->RxState; - - /* Process Locked */ - __HAL_LOCK(huart); - - if ((HAL_IS_BIT_SET(huart->Instance->CR3, USART_CR3_DMAT)) && - (gstate == HAL_UART_STATE_BUSY_TX)) - { - /* Disable the UART DMA Tx request */ - CLEAR_BIT(huart->Instance->CR3, USART_CR3_DMAT); - } - if ((HAL_IS_BIT_SET(huart->Instance->CR3, USART_CR3_DMAR)) && - (rxstate == HAL_UART_STATE_BUSY_RX)) - { - /* Disable PE and ERR (Frame error, noise error, overrun error) interrupts */ - CLEAR_BIT(huart->Instance->CR1, USART_CR1_PEIE); - CLEAR_BIT(huart->Instance->CR3, USART_CR3_EIE); - - /* Disable the UART DMA Rx request */ - CLEAR_BIT(huart->Instance->CR3, USART_CR3_DMAR); - } - - /* Process Unlocked */ - __HAL_UNLOCK(huart); - - return HAL_OK; -} - -/** - * @brief Resume the DMA Transfer. - * @param huart UART handle. - * @retval HAL status - */ -HAL_StatusTypeDef HAL_UART_DMAResume(UART_HandleTypeDef *huart) -{ - /* Process Locked */ - __HAL_LOCK(huart); - - if (huart->gState == HAL_UART_STATE_BUSY_TX) - { - /* Enable the UART DMA Tx request */ - SET_BIT(huart->Instance->CR3, USART_CR3_DMAT); - } - if (huart->RxState == HAL_UART_STATE_BUSY_RX) - { - /* Clear the Overrun flag before resuming the Rx transfer */ - __HAL_UART_CLEAR_FLAG(huart, UART_CLEAR_OREF); - - /* Reenable PE and ERR (Frame error, noise error, overrun error) interrupts */ - SET_BIT(huart->Instance->CR1, USART_CR1_PEIE); - SET_BIT(huart->Instance->CR3, USART_CR3_EIE); - - /* Enable the UART DMA Rx request */ - SET_BIT(huart->Instance->CR3, USART_CR3_DMAR); - } - - /* Process Unlocked */ - __HAL_UNLOCK(huart); - - return HAL_OK; -} - -/** - * @brief Stop the DMA Transfer. - * @param huart UART handle. - * @retval HAL status - */ -HAL_StatusTypeDef HAL_UART_DMAStop(UART_HandleTypeDef *huart) -{ - /* The Lock is not implemented on this API to allow the user application - to call the HAL UART API under callbacks HAL_UART_TxCpltCallback() / HAL_UART_RxCpltCallback() / - HAL_UART_TxHalfCpltCallback / HAL_UART_RxHalfCpltCallback: - indeed, when HAL_DMA_Abort() API is called, the DMA TX/RX Transfer or Half Transfer complete - interrupt is generated if the DMA transfer interruption occurs at the middle or at the end of - the stream and the corresponding call back is executed. */ - - const HAL_UART_StateTypeDef gstate = huart->gState; - const HAL_UART_StateTypeDef rxstate = huart->RxState; - - /* Stop UART DMA Tx request if ongoing */ - if ((HAL_IS_BIT_SET(huart->Instance->CR3, USART_CR3_DMAT)) && - (gstate == HAL_UART_STATE_BUSY_TX)) - { - CLEAR_BIT(huart->Instance->CR3, USART_CR3_DMAT); - - /* Abort the UART DMA Tx channel */ - if (huart->hdmatx != NULL) - { - if (HAL_DMA_Abort(huart->hdmatx) != HAL_OK) - { - if (HAL_DMA_GetError(huart->hdmatx) == HAL_DMA_ERROR_TIMEOUT) - { - /* Set error code to DMA */ - huart->ErrorCode = HAL_UART_ERROR_DMA; - - return HAL_TIMEOUT; - } - } - } - - UART_EndTxTransfer(huart); - } - - /* Stop UART DMA Rx request if ongoing */ - if ((HAL_IS_BIT_SET(huart->Instance->CR3, USART_CR3_DMAR)) && - (rxstate == HAL_UART_STATE_BUSY_RX)) - { - CLEAR_BIT(huart->Instance->CR3, USART_CR3_DMAR); - - /* Abort the UART DMA Rx channel */ - if (huart->hdmarx != NULL) - { - if (HAL_DMA_Abort(huart->hdmarx) != HAL_OK) - { - if (HAL_DMA_GetError(huart->hdmarx) == HAL_DMA_ERROR_TIMEOUT) - { - /* Set error code to DMA */ - huart->ErrorCode = HAL_UART_ERROR_DMA; - - return HAL_TIMEOUT; - } - } - } - - UART_EndRxTransfer(huart); - } - - return HAL_OK; -} - -/** - * @brief Abort ongoing transfers (blocking mode). - * @param huart UART handle. - * @note This procedure could be used for aborting any ongoing transfer started in Interrupt or DMA mode. - * This procedure performs following operations : - * - Disable UART Interrupts (Tx and Rx) - * - Disable the DMA transfer in the peripheral register (if enabled) - * - Abort DMA transfer by calling HAL_DMA_Abort (in case of transfer in DMA mode) - * - Set handle State to READY - * @note This procedure is executed in blocking mode : when exiting function, Abort is considered as completed. - * @retval HAL status -*/ -HAL_StatusTypeDef HAL_UART_Abort(UART_HandleTypeDef *huart) -{ - /* Disable TXEIE, TCIE, RXNE, PE and ERR (Frame error, noise error, overrun error) interrupts */ - CLEAR_BIT(huart->Instance->CR1, (USART_CR1_RXNEIE | USART_CR1_PEIE | USART_CR1_TXEIE | USART_CR1_TCIE)); - CLEAR_BIT(huart->Instance->CR3, USART_CR3_EIE); - - /* Disable the UART DMA Tx request if enabled */ - if (HAL_IS_BIT_SET(huart->Instance->CR3, USART_CR3_DMAT)) - { - CLEAR_BIT(huart->Instance->CR3, USART_CR3_DMAT); - - /* Abort the UART DMA Tx channel : use blocking DMA Abort API (no callback) */ - if (huart->hdmatx != NULL) - { - /* Set the UART DMA Abort callback to Null. - No call back execution at end of DMA abort procedure */ - huart->hdmatx->XferAbortCallback = NULL; - - if (HAL_DMA_Abort(huart->hdmatx) != HAL_OK) - { - if (HAL_DMA_GetError(huart->hdmatx) == HAL_DMA_ERROR_TIMEOUT) - { - /* Set error code to DMA */ - huart->ErrorCode = HAL_UART_ERROR_DMA; - - return HAL_TIMEOUT; - } - } - } - } - - /* Disable the UART DMA Rx request if enabled */ - if (HAL_IS_BIT_SET(huart->Instance->CR3, USART_CR3_DMAR)) - { - CLEAR_BIT(huart->Instance->CR3, USART_CR3_DMAR); - - /* Abort the UART DMA Rx channel : use blocking DMA Abort API (no callback) */ - if (huart->hdmarx != NULL) - { - /* Set the UART DMA Abort callback to Null. - No call back execution at end of DMA abort procedure */ - huart->hdmarx->XferAbortCallback = NULL; - - if (HAL_DMA_Abort(huart->hdmarx) != HAL_OK) - { - if (HAL_DMA_GetError(huart->hdmarx) == HAL_DMA_ERROR_TIMEOUT) - { - /* Set error code to DMA */ - huart->ErrorCode = HAL_UART_ERROR_DMA; - - return HAL_TIMEOUT; - } - } - } - } - - /* Reset Tx and Rx transfer counters */ - huart->TxXferCount = 0U; - huart->RxXferCount = 0U; - - /* Clear the Error flags in the ICR register */ - __HAL_UART_CLEAR_FLAG(huart, UART_CLEAR_OREF | UART_CLEAR_NEF | UART_CLEAR_PEF | UART_CLEAR_FEF); - - - /* Discard the received data */ - __HAL_UART_SEND_REQ(huart, UART_RXDATA_FLUSH_REQUEST); - - /* Restore huart->gState and huart->RxState to Ready */ - huart->gState = HAL_UART_STATE_READY; - huart->RxState = HAL_UART_STATE_READY; - - /* Reset Handle ErrorCode to No Error */ - huart->ErrorCode = HAL_UART_ERROR_NONE; - - return HAL_OK; -} - -/** - * @brief Abort ongoing Transmit transfer (blocking mode). - * @param huart UART handle. - * @note This procedure could be used for aborting any ongoing Tx transfer started in Interrupt or DMA mode. - * This procedure performs following operations : - * - Disable UART Interrupts (Tx) - * - Disable the DMA transfer in the peripheral register (if enabled) - * - Abort DMA transfer by calling HAL_DMA_Abort (in case of transfer in DMA mode) - * - Set handle State to READY - * @note This procedure is executed in blocking mode : when exiting function, Abort is considered as completed. - * @retval HAL status -*/ -HAL_StatusTypeDef HAL_UART_AbortTransmit(UART_HandleTypeDef *huart) -{ - /* Disable TXEIE and TCIE interrupts */ - CLEAR_BIT(huart->Instance->CR1, (USART_CR1_TXEIE | USART_CR1_TCIE)); - - /* Disable the UART DMA Tx request if enabled */ - if (HAL_IS_BIT_SET(huart->Instance->CR3, USART_CR3_DMAT)) - { - CLEAR_BIT(huart->Instance->CR3, USART_CR3_DMAT); - - /* Abort the UART DMA Tx channel : use blocking DMA Abort API (no callback) */ - if (huart->hdmatx != NULL) - { - /* Set the UART DMA Abort callback to Null. - No call back execution at end of DMA abort procedure */ - huart->hdmatx->XferAbortCallback = NULL; - - if (HAL_DMA_Abort(huart->hdmatx) != HAL_OK) - { - if (HAL_DMA_GetError(huart->hdmatx) == HAL_DMA_ERROR_TIMEOUT) - { - /* Set error code to DMA */ - huart->ErrorCode = HAL_UART_ERROR_DMA; - - return HAL_TIMEOUT; - } - } - } - } - - /* Reset Tx transfer counter */ - huart->TxXferCount = 0U; - - - /* Restore huart->gState to Ready */ - huart->gState = HAL_UART_STATE_READY; - - return HAL_OK; -} - -/** - * @brief Abort ongoing Receive transfer (blocking mode). - * @param huart UART handle. - * @note This procedure could be used for aborting any ongoing Rx transfer started in Interrupt or DMA mode. - * This procedure performs following operations : - * - Disable UART Interrupts (Rx) - * - Disable the DMA transfer in the peripheral register (if enabled) - * - Abort DMA transfer by calling HAL_DMA_Abort (in case of transfer in DMA mode) - * - Set handle State to READY - * @note This procedure is executed in blocking mode : when exiting function, Abort is considered as completed. - * @retval HAL status -*/ -HAL_StatusTypeDef HAL_UART_AbortReceive(UART_HandleTypeDef *huart) -{ - /* Disable RXNE, PE and ERR (Frame error, noise error, overrun error) interrupts */ - CLEAR_BIT(huart->Instance->CR1, (USART_CR1_RXNEIE | USART_CR1_PEIE)); - CLEAR_BIT(huart->Instance->CR3, USART_CR3_EIE); - - /* Disable the UART DMA Rx request if enabled */ - if (HAL_IS_BIT_SET(huart->Instance->CR3, USART_CR3_DMAR)) - { - CLEAR_BIT(huart->Instance->CR3, USART_CR3_DMAR); - - /* Abort the UART DMA Rx channel : use blocking DMA Abort API (no callback) */ - if (huart->hdmarx != NULL) - { - /* Set the UART DMA Abort callback to Null. - No call back execution at end of DMA abort procedure */ - huart->hdmarx->XferAbortCallback = NULL; - - if (HAL_DMA_Abort(huart->hdmarx) != HAL_OK) - { - if (HAL_DMA_GetError(huart->hdmarx) == HAL_DMA_ERROR_TIMEOUT) - { - /* Set error code to DMA */ - huart->ErrorCode = HAL_UART_ERROR_DMA; - - return HAL_TIMEOUT; - } - } - } - } - - /* Reset Rx transfer counter */ - huart->RxXferCount = 0U; - - /* Clear the Error flags in the ICR register */ - __HAL_UART_CLEAR_FLAG(huart, UART_CLEAR_OREF | UART_CLEAR_NEF | UART_CLEAR_PEF | UART_CLEAR_FEF); - - /* Discard the received data */ - __HAL_UART_SEND_REQ(huart, UART_RXDATA_FLUSH_REQUEST); - - /* Restore huart->RxState to Ready */ - huart->RxState = HAL_UART_STATE_READY; - - return HAL_OK; -} - -/** - * @brief Abort ongoing transfers (Interrupt mode). - * @param huart UART handle. - * @note This procedure could be used for aborting any ongoing transfer started in Interrupt or DMA mode. - * This procedure performs following operations : - * - Disable UART Interrupts (Tx and Rx) - * - Disable the DMA transfer in the peripheral register (if enabled) - * - Abort DMA transfer by calling HAL_DMA_Abort_IT (in case of transfer in DMA mode) - * - Set handle State to READY - * - At abort completion, call user abort complete callback - * @note This procedure is executed in Interrupt mode, meaning that abort procedure could be - * considered as completed only when user abort complete callback is executed (not when exiting function). - * @retval HAL status -*/ -HAL_StatusTypeDef HAL_UART_Abort_IT(UART_HandleTypeDef *huart) -{ - uint32_t abortcplt = 1U; - - /* Disable interrupts */ - CLEAR_BIT(huart->Instance->CR1, (USART_CR1_RXNEIE | USART_CR1_PEIE | USART_CR1_TXEIE | USART_CR1_TCIE)); - CLEAR_BIT(huart->Instance->CR3, USART_CR3_EIE); - - /* If DMA Tx and/or DMA Rx Handles are associated to UART Handle, DMA Abort complete callbacks should be initialised - before any call to DMA Abort functions */ - /* DMA Tx Handle is valid */ - if (huart->hdmatx != NULL) - { - /* Set DMA Abort Complete callback if UART DMA Tx request if enabled. - Otherwise, set it to NULL */ - if (HAL_IS_BIT_SET(huart->Instance->CR3, USART_CR3_DMAT)) - { - huart->hdmatx->XferAbortCallback = UART_DMATxAbortCallback; - } - else - { - huart->hdmatx->XferAbortCallback = NULL; - } - } - /* DMA Rx Handle is valid */ - if (huart->hdmarx != NULL) - { - /* Set DMA Abort Complete callback if UART DMA Rx request if enabled. - Otherwise, set it to NULL */ - if (HAL_IS_BIT_SET(huart->Instance->CR3, USART_CR3_DMAR)) - { - huart->hdmarx->XferAbortCallback = UART_DMARxAbortCallback; - } - else - { - huart->hdmarx->XferAbortCallback = NULL; - } - } - - /* Disable the UART DMA Tx request if enabled */ - if (HAL_IS_BIT_SET(huart->Instance->CR3, USART_CR3_DMAT)) - { - /* Disable DMA Tx at UART level */ - CLEAR_BIT(huart->Instance->CR3, USART_CR3_DMAT); - - /* Abort the UART DMA Tx channel : use non blocking DMA Abort API (callback) */ - if (huart->hdmatx != NULL) - { - /* UART Tx DMA Abort callback has already been initialised : - will lead to call HAL_UART_AbortCpltCallback() at end of DMA abort procedure */ - - /* Abort DMA TX */ - if (HAL_DMA_Abort_IT(huart->hdmatx) != HAL_OK) - { - huart->hdmatx->XferAbortCallback = NULL; - } - else - { - abortcplt = 0U; - } - } - } - - /* Disable the UART DMA Rx request if enabled */ - if (HAL_IS_BIT_SET(huart->Instance->CR3, USART_CR3_DMAR)) - { - CLEAR_BIT(huart->Instance->CR3, USART_CR3_DMAR); - - /* Abort the UART DMA Rx channel : use non blocking DMA Abort API (callback) */ - if (huart->hdmarx != NULL) - { - /* UART Rx DMA Abort callback has already been initialised : - will lead to call HAL_UART_AbortCpltCallback() at end of DMA abort procedure */ - - /* Abort DMA RX */ - if (HAL_DMA_Abort_IT(huart->hdmarx) != HAL_OK) - { - huart->hdmarx->XferAbortCallback = NULL; - abortcplt = 1U; - } - else - { - abortcplt = 0U; - } - } - } - - /* if no DMA abort complete callback execution is required => call user Abort Complete callback */ - if (abortcplt == 1U) - { - /* Reset Tx and Rx transfer counters */ - huart->TxXferCount = 0U; - huart->RxXferCount = 0U; - - /* Clear ISR function pointers */ - huart->RxISR = NULL; - huart->TxISR = NULL; - - /* Reset errorCode */ - huart->ErrorCode = HAL_UART_ERROR_NONE; - - /* Clear the Error flags in the ICR register */ - __HAL_UART_CLEAR_FLAG(huart, UART_CLEAR_OREF | UART_CLEAR_NEF | UART_CLEAR_PEF | UART_CLEAR_FEF); - - - /* Discard the received data */ - __HAL_UART_SEND_REQ(huart, UART_RXDATA_FLUSH_REQUEST); - - /* Restore huart->gState and huart->RxState to Ready */ - huart->gState = HAL_UART_STATE_READY; - huart->RxState = HAL_UART_STATE_READY; - - /* As no DMA to be aborted, call directly user Abort complete callback */ -#if (USE_HAL_UART_REGISTER_CALLBACKS == 1) - /* Call registered Abort complete callback */ - huart->AbortCpltCallback(huart); -#else - /* Call legacy weak Abort complete callback */ - HAL_UART_AbortCpltCallback(huart); -#endif /* USE_HAL_UART_REGISTER_CALLBACKS */ - } - - return HAL_OK; -} - -/** - * @brief Abort ongoing Transmit transfer (Interrupt mode). - * @param huart UART handle. - * @note This procedure could be used for aborting any ongoing Tx transfer started in Interrupt or DMA mode. - * This procedure performs following operations : - * - Disable UART Interrupts (Tx) - * - Disable the DMA transfer in the peripheral register (if enabled) - * - Abort DMA transfer by calling HAL_DMA_Abort_IT (in case of transfer in DMA mode) - * - Set handle State to READY - * - At abort completion, call user abort complete callback - * @note This procedure is executed in Interrupt mode, meaning that abort procedure could be - * considered as completed only when user abort complete callback is executed (not when exiting function). - * @retval HAL status -*/ -HAL_StatusTypeDef HAL_UART_AbortTransmit_IT(UART_HandleTypeDef *huart) -{ - /* Disable interrupts */ - CLEAR_BIT(huart->Instance->CR1, (USART_CR1_TXEIE | USART_CR1_TCIE)); - - /* Disable the UART DMA Tx request if enabled */ - if (HAL_IS_BIT_SET(huart->Instance->CR3, USART_CR3_DMAT)) - { - CLEAR_BIT(huart->Instance->CR3, USART_CR3_DMAT); - - /* Abort the UART DMA Tx channel : use non blocking DMA Abort API (callback) */ - if (huart->hdmatx != NULL) - { - /* Set the UART DMA Abort callback : - will lead to call HAL_UART_AbortCpltCallback() at end of DMA abort procedure */ - huart->hdmatx->XferAbortCallback = UART_DMATxOnlyAbortCallback; - - /* Abort DMA TX */ - if (HAL_DMA_Abort_IT(huart->hdmatx) != HAL_OK) - { - /* Call Directly huart->hdmatx->XferAbortCallback function in case of error */ - huart->hdmatx->XferAbortCallback(huart->hdmatx); - } - } - else - { - /* Reset Tx transfer counter */ - huart->TxXferCount = 0U; - - /* Clear TxISR function pointers */ - huart->TxISR = NULL; - - /* Restore huart->gState to Ready */ - huart->gState = HAL_UART_STATE_READY; - - /* As no DMA to be aborted, call directly user Abort complete callback */ -#if (USE_HAL_UART_REGISTER_CALLBACKS == 1) - /* Call registered Abort Transmit Complete Callback */ - huart->AbortTransmitCpltCallback(huart); -#else - /* Call legacy weak Abort Transmit Complete Callback */ - HAL_UART_AbortTransmitCpltCallback(huart); -#endif /* USE_HAL_UART_REGISTER_CALLBACKS */ - } - } - else - { - /* Reset Tx transfer counter */ - huart->TxXferCount = 0U; - - /* Clear TxISR function pointers */ - huart->TxISR = NULL; - - - /* Restore huart->gState to Ready */ - huart->gState = HAL_UART_STATE_READY; - - /* As no DMA to be aborted, call directly user Abort complete callback */ -#if (USE_HAL_UART_REGISTER_CALLBACKS == 1) - /* Call registered Abort Transmit Complete Callback */ - huart->AbortTransmitCpltCallback(huart); -#else - /* Call legacy weak Abort Transmit Complete Callback */ - HAL_UART_AbortTransmitCpltCallback(huart); -#endif /* USE_HAL_UART_REGISTER_CALLBACKS */ - } - - return HAL_OK; -} - -/** - * @brief Abort ongoing Receive transfer (Interrupt mode). - * @param huart UART handle. - * @note This procedure could be used for aborting any ongoing Rx transfer started in Interrupt or DMA mode. - * This procedure performs following operations : - * - Disable UART Interrupts (Rx) - * - Disable the DMA transfer in the peripheral register (if enabled) - * - Abort DMA transfer by calling HAL_DMA_Abort_IT (in case of transfer in DMA mode) - * - Set handle State to READY - * - At abort completion, call user abort complete callback - * @note This procedure is executed in Interrupt mode, meaning that abort procedure could be - * considered as completed only when user abort complete callback is executed (not when exiting function). - * @retval HAL status -*/ -HAL_StatusTypeDef HAL_UART_AbortReceive_IT(UART_HandleTypeDef *huart) -{ - /* Disable RXNE, PE and ERR (Frame error, noise error, overrun error) interrupts */ - CLEAR_BIT(huart->Instance->CR1, (USART_CR1_RXNEIE | USART_CR1_PEIE)); - CLEAR_BIT(huart->Instance->CR3, USART_CR3_EIE); - - /* Disable the UART DMA Rx request if enabled */ - if (HAL_IS_BIT_SET(huart->Instance->CR3, USART_CR3_DMAR)) - { - CLEAR_BIT(huart->Instance->CR3, USART_CR3_DMAR); - - /* Abort the UART DMA Rx channel : use non blocking DMA Abort API (callback) */ - if (huart->hdmarx != NULL) - { - /* Set the UART DMA Abort callback : - will lead to call HAL_UART_AbortCpltCallback() at end of DMA abort procedure */ - huart->hdmarx->XferAbortCallback = UART_DMARxOnlyAbortCallback; - - /* Abort DMA RX */ - if (HAL_DMA_Abort_IT(huart->hdmarx) != HAL_OK) - { - /* Call Directly huart->hdmarx->XferAbortCallback function in case of error */ - huart->hdmarx->XferAbortCallback(huart->hdmarx); - } - } - else - { - /* Reset Rx transfer counter */ - huart->RxXferCount = 0U; - - /* Clear RxISR function pointer */ - huart->pRxBuffPtr = NULL; - - /* Clear the Error flags in the ICR register */ - __HAL_UART_CLEAR_FLAG(huart, UART_CLEAR_OREF | UART_CLEAR_NEF | UART_CLEAR_PEF | UART_CLEAR_FEF); - - /* Discard the received data */ - __HAL_UART_SEND_REQ(huart, UART_RXDATA_FLUSH_REQUEST); - - /* Restore huart->RxState to Ready */ - huart->RxState = HAL_UART_STATE_READY; - - /* As no DMA to be aborted, call directly user Abort complete callback */ -#if (USE_HAL_UART_REGISTER_CALLBACKS == 1) - /* Call registered Abort Receive Complete Callback */ - huart->AbortReceiveCpltCallback(huart); -#else - /* Call legacy weak Abort Receive Complete Callback */ - HAL_UART_AbortReceiveCpltCallback(huart); -#endif /* USE_HAL_UART_REGISTER_CALLBACKS */ - } - } - else - { - /* Reset Rx transfer counter */ - huart->RxXferCount = 0U; - - /* Clear RxISR function pointer */ - huart->pRxBuffPtr = NULL; - - /* Clear the Error flags in the ICR register */ - __HAL_UART_CLEAR_FLAG(huart, UART_CLEAR_OREF | UART_CLEAR_NEF | UART_CLEAR_PEF | UART_CLEAR_FEF); - - /* Restore huart->RxState to Ready */ - huart->RxState = HAL_UART_STATE_READY; - - /* As no DMA to be aborted, call directly user Abort complete callback */ -#if (USE_HAL_UART_REGISTER_CALLBACKS == 1) - /* Call registered Abort Receive Complete Callback */ - huart->AbortReceiveCpltCallback(huart); -#else - /* Call legacy weak Abort Receive Complete Callback */ - HAL_UART_AbortReceiveCpltCallback(huart); -#endif /* USE_HAL_UART_REGISTER_CALLBACKS */ - } - - return HAL_OK; -} - -/** - * @brief Handle UART interrupt request. - * @param huart UART handle. - * @retval None - */ -void HAL_UART_IRQHandler(UART_HandleTypeDef *huart) -{ - uint32_t isrflags = READ_REG(huart->Instance->ISR); - uint32_t cr1its = READ_REG(huart->Instance->CR1); - uint32_t cr3its = READ_REG(huart->Instance->CR3); - - uint32_t errorflags; - uint32_t errorcode; - - /* If no error occurs */ - errorflags = (isrflags & (uint32_t)(USART_ISR_PE | USART_ISR_FE | USART_ISR_ORE | USART_ISR_NE)); - if (errorflags == 0U) - { - /* UART in mode Receiver ---------------------------------------------------*/ - if (((isrflags & USART_ISR_RXNE) != 0U) - && ((cr1its & USART_CR1_RXNEIE) != 0U)) - { - if (huart->RxISR != NULL) - { - huart->RxISR(huart); - } - return; - } - } - - /* If some errors occur */ - if ((errorflags != 0U) - && (((cr3its & USART_CR3_EIE) != 0U) - || ((cr1its & (USART_CR1_RXNEIE | USART_CR1_PEIE)) != 0U))) - { - /* UART parity error interrupt occurred -------------------------------------*/ - if (((isrflags & USART_ISR_PE) != 0U) && ((cr1its & USART_CR1_PEIE) != 0U)) - { - __HAL_UART_CLEAR_FLAG(huart, UART_CLEAR_PEF); - - huart->ErrorCode |= HAL_UART_ERROR_PE; - } - - /* UART frame error interrupt occurred --------------------------------------*/ - if (((isrflags & USART_ISR_FE) != 0U) && ((cr3its & USART_CR3_EIE) != 0U)) - { - __HAL_UART_CLEAR_FLAG(huart, UART_CLEAR_FEF); - - huart->ErrorCode |= HAL_UART_ERROR_FE; - } - - /* UART noise error interrupt occurred --------------------------------------*/ - if (((isrflags & USART_ISR_NE) != 0U) && ((cr3its & USART_CR3_EIE) != 0U)) - { - __HAL_UART_CLEAR_FLAG(huart, UART_CLEAR_NEF); - - huart->ErrorCode |= HAL_UART_ERROR_NE; - } - - /* UART Over-Run interrupt occurred -----------------------------------------*/ - if (((isrflags & USART_ISR_ORE) != 0U) - && (((cr1its & USART_CR1_RXNEIE) != 0U) || - ((cr3its & USART_CR3_EIE) != 0U))) - { - __HAL_UART_CLEAR_FLAG(huart, UART_CLEAR_OREF); - - huart->ErrorCode |= HAL_UART_ERROR_ORE; - } - - /* Call UART Error Call back function if need be --------------------------*/ - if (huart->ErrorCode != HAL_UART_ERROR_NONE) - { - /* UART in mode Receiver ---------------------------------------------------*/ - if (((isrflags & USART_ISR_RXNE) != 0U) - && ((cr1its & USART_CR1_RXNEIE) != 0U)) - { - if (huart->RxISR != NULL) - { - huart->RxISR(huart); - } - } - - /* If Overrun error occurs, or if any error occurs in DMA mode reception, - consider error as blocking */ - errorcode = huart->ErrorCode; - if ((HAL_IS_BIT_SET(huart->Instance->CR3, USART_CR3_DMAR)) || - ((errorcode & HAL_UART_ERROR_ORE) != 0U)) - { - /* Blocking error : transfer is aborted - Set the UART state ready to be able to start again the process, - Disable Rx Interrupts, and disable Rx DMA request, if ongoing */ - UART_EndRxTransfer(huart); - - /* Disable the UART DMA Rx request if enabled */ - if (HAL_IS_BIT_SET(huart->Instance->CR3, USART_CR3_DMAR)) - { - CLEAR_BIT(huart->Instance->CR3, USART_CR3_DMAR); - - /* Abort the UART DMA Rx channel */ - if (huart->hdmarx != NULL) - { - /* Set the UART DMA Abort callback : - will lead to call HAL_UART_ErrorCallback() at end of DMA abort procedure */ - huart->hdmarx->XferAbortCallback = UART_DMAAbortOnError; - - /* Abort DMA RX */ - if (HAL_DMA_Abort_IT(huart->hdmarx) != HAL_OK) - { - /* Call Directly huart->hdmarx->XferAbortCallback function in case of error */ - huart->hdmarx->XferAbortCallback(huart->hdmarx); - } - } - else - { - /* Call user error callback */ -#if (USE_HAL_UART_REGISTER_CALLBACKS == 1) - /*Call registered error callback*/ - huart->ErrorCallback(huart); -#else - /*Call legacy weak error callback*/ - HAL_UART_ErrorCallback(huart); -#endif /* USE_HAL_UART_REGISTER_CALLBACKS */ - - } - } - else - { - /* Call user error callback */ -#if (USE_HAL_UART_REGISTER_CALLBACKS == 1) - /*Call registered error callback*/ - huart->ErrorCallback(huart); -#else - /*Call legacy weak error callback*/ - HAL_UART_ErrorCallback(huart); -#endif /* USE_HAL_UART_REGISTER_CALLBACKS */ - } - } - else - { - /* Non Blocking error : transfer could go on. - Error is notified to user through user error callback */ -#if (USE_HAL_UART_REGISTER_CALLBACKS == 1) - /*Call registered error callback*/ - huart->ErrorCallback(huart); -#else - /*Call legacy weak error callback*/ - HAL_UART_ErrorCallback(huart); -#endif /* USE_HAL_UART_REGISTER_CALLBACKS */ - huart->ErrorCode = HAL_UART_ERROR_NONE; - } - } - return; - - } /* End if some error occurs */ - - /* UART in mode Transmitter ------------------------------------------------*/ - if (((isrflags & USART_ISR_TXE) != 0U) - && ((cr1its & USART_CR1_TXEIE) != 0U)) - { - if (huart->TxISR != NULL) - { - huart->TxISR(huart); - } - return; - } - - /* UART in mode Transmitter (transmission end) -----------------------------*/ - if (((isrflags & USART_ISR_TC) != 0U) && ((cr1its & USART_CR1_TCIE) != 0U)) - { - UART_EndTransmit_IT(huart); - return; - } - -} - -/** - * @brief Tx Transfer completed callback. - * @param huart UART handle. - * @retval None - */ -__weak void HAL_UART_TxCpltCallback(UART_HandleTypeDef *huart) -{ - /* Prevent unused argument(s) compilation warning */ - UNUSED(huart); - - /* NOTE : This function should not be modified, when the callback is needed, - the HAL_UART_TxCpltCallback can be implemented in the user file. - */ -} - -/** - * @brief Tx Half Transfer completed callback. - * @param huart UART handle. - * @retval None - */ -__weak void HAL_UART_TxHalfCpltCallback(UART_HandleTypeDef *huart) -{ - /* Prevent unused argument(s) compilation warning */ - UNUSED(huart); - - /* NOTE: This function should not be modified, when the callback is needed, - the HAL_UART_TxHalfCpltCallback can be implemented in the user file. - */ -} - -/** - * @brief Rx Transfer completed callback. - * @param huart UART handle. - * @retval None - */ -__weak void HAL_UART_RxCpltCallback(UART_HandleTypeDef *huart) -{ - /* Prevent unused argument(s) compilation warning */ - UNUSED(huart); - - /* NOTE : This function should not be modified, when the callback is needed, - the HAL_UART_RxCpltCallback can be implemented in the user file. - */ -} - -/** - * @brief Rx Half Transfer completed callback. - * @param huart UART handle. - * @retval None - */ -__weak void HAL_UART_RxHalfCpltCallback(UART_HandleTypeDef *huart) -{ - /* Prevent unused argument(s) compilation warning */ - UNUSED(huart); - - /* NOTE: This function should not be modified, when the callback is needed, - the HAL_UART_RxHalfCpltCallback can be implemented in the user file. - */ -} - -/** - * @brief UART error callback. - * @param huart UART handle. - * @retval None - */ -__weak void HAL_UART_ErrorCallback(UART_HandleTypeDef *huart) -{ - /* Prevent unused argument(s) compilation warning */ - UNUSED(huart); - - /* NOTE : This function should not be modified, when the callback is needed, - the HAL_UART_ErrorCallback can be implemented in the user file. - */ -} - -/** - * @brief UART Abort Complete callback. - * @param huart UART handle. - * @retval None - */ -__weak void HAL_UART_AbortCpltCallback(UART_HandleTypeDef *huart) -{ - /* Prevent unused argument(s) compilation warning */ - UNUSED(huart); - - /* NOTE : This function should not be modified, when the callback is needed, - the HAL_UART_AbortCpltCallback can be implemented in the user file. - */ -} - -/** - * @brief UART Abort Complete callback. - * @param huart UART handle. - * @retval None - */ -__weak void HAL_UART_AbortTransmitCpltCallback(UART_HandleTypeDef *huart) -{ - /* Prevent unused argument(s) compilation warning */ - UNUSED(huart); - - /* NOTE : This function should not be modified, when the callback is needed, - the HAL_UART_AbortTransmitCpltCallback can be implemented in the user file. - */ -} - -/** - * @brief UART Abort Receive Complete callback. - * @param huart UART handle. - * @retval None - */ -__weak void HAL_UART_AbortReceiveCpltCallback(UART_HandleTypeDef *huart) -{ - /* Prevent unused argument(s) compilation warning */ - UNUSED(huart); - - /* NOTE : This function should not be modified, when the callback is needed, - the HAL_UART_AbortReceiveCpltCallback can be implemented in the user file. - */ -} - -/** - * @} - */ - -/** @defgroup UART_Exported_Functions_Group3 Peripheral Control functions - * @brief UART control functions - * -@verbatim - =============================================================================== - ##### Peripheral Control functions ##### - =============================================================================== - [..] - This subsection provides a set of functions allowing to control the UART. - (+) HAL_MultiProcessor_EnableMuteMode() API enables mute mode - (+) HAL_MultiProcessor_DisableMuteMode() API disables mute mode - (+) HAL_MultiProcessor_EnterMuteMode() API enters mute mode - (+) UART_SetConfig() API configures the UART peripheral - (+) UART_AdvFeatureConfig() API optionally configures the UART advanced features - (+) UART_CheckIdleState() API ensures that TEACK and/or REACK are set after initialization - (+) HAL_HalfDuplex_EnableTransmitter() API disables receiver and enables transmitter - (+) HAL_HalfDuplex_EnableReceiver() API disables transmitter and enables receiver - (+) HAL_LIN_SendBreak() API transmits the break characters -@endverbatim - * @{ - */ - -/** - * @brief Enable UART in mute mode (does not mean UART enters mute mode; - * to enter mute mode, HAL_MultiProcessor_EnterMuteMode() API must be called). - * @param huart UART handle. - * @retval HAL status - */ -HAL_StatusTypeDef HAL_MultiProcessor_EnableMuteMode(UART_HandleTypeDef *huart) -{ - /* Process Locked */ - __HAL_LOCK(huart); - - huart->gState = HAL_UART_STATE_BUSY; - - /* Enable USART mute mode by setting the MME bit in the CR1 register */ - SET_BIT(huart->Instance->CR1, USART_CR1_MME); - - huart->gState = HAL_UART_STATE_READY; - - return (UART_CheckIdleState(huart)); -} - -/** - * @brief Disable UART mute mode (does not mean the UART actually exits mute mode - * as it may not have been in mute mode at this very moment). - * @param huart UART handle. - * @retval HAL status - */ -HAL_StatusTypeDef HAL_MultiProcessor_DisableMuteMode(UART_HandleTypeDef *huart) -{ - /* Process Locked */ - __HAL_LOCK(huart); - - huart->gState = HAL_UART_STATE_BUSY; - - /* Disable USART mute mode by clearing the MME bit in the CR1 register */ - CLEAR_BIT(huart->Instance->CR1, USART_CR1_MME); - - huart->gState = HAL_UART_STATE_READY; - - return (UART_CheckIdleState(huart)); -} - -/** - * @brief Enter UART mute mode (means UART actually enters mute mode). - * @note To exit from mute mode, HAL_MultiProcessor_DisableMuteMode() API must be called. - * @param huart UART handle. - * @retval None - */ -void HAL_MultiProcessor_EnterMuteMode(UART_HandleTypeDef *huart) -{ - __HAL_UART_SEND_REQ(huart, UART_MUTE_MODE_REQUEST); -} - -/** - * @brief Enable the UART transmitter and disable the UART receiver. - * @param huart UART handle. - * @retval HAL status - */ -HAL_StatusTypeDef HAL_HalfDuplex_EnableTransmitter(UART_HandleTypeDef *huart) -{ - /* Process Locked */ - __HAL_LOCK(huart); - huart->gState = HAL_UART_STATE_BUSY; - - /* Clear TE and RE bits */ - CLEAR_BIT(huart->Instance->CR1, (USART_CR1_TE | USART_CR1_RE)); - - /* Enable the USART's transmit interface by setting the TE bit in the USART CR1 register */ - SET_BIT(huart->Instance->CR1, USART_CR1_TE); - - huart->gState = HAL_UART_STATE_READY; - - /* Process Unlocked */ - __HAL_UNLOCK(huart); - - return HAL_OK; -} - -/** - * @brief Enable the UART receiver and disable the UART transmitter. - * @param huart UART handle. - * @retval HAL status. - */ -HAL_StatusTypeDef HAL_HalfDuplex_EnableReceiver(UART_HandleTypeDef *huart) -{ - /* Process Locked */ - __HAL_LOCK(huart); - huart->gState = HAL_UART_STATE_BUSY; - - /* Clear TE and RE bits */ - CLEAR_BIT(huart->Instance->CR1, (USART_CR1_TE | USART_CR1_RE)); - - /* Enable the USART's receive interface by setting the RE bit in the USART CR1 register */ - SET_BIT(huart->Instance->CR1, USART_CR1_RE); - - huart->gState = HAL_UART_STATE_READY; - - /* Process Unlocked */ - __HAL_UNLOCK(huart); - - return HAL_OK; -} - - -/** - * @brief Transmit break characters. - * @param huart UART handle. - * @retval HAL status - */ -HAL_StatusTypeDef HAL_LIN_SendBreak(UART_HandleTypeDef *huart) -{ - /* Check the parameters */ - assert_param(IS_UART_LIN_INSTANCE(huart->Instance)); - - /* Process Locked */ - __HAL_LOCK(huart); - - huart->gState = HAL_UART_STATE_BUSY; - - /* Send break characters */ - __HAL_UART_SEND_REQ(huart, UART_SENDBREAK_REQUEST); - - huart->gState = HAL_UART_STATE_READY; - - /* Process Unlocked */ - __HAL_UNLOCK(huart); - - return HAL_OK; -} - -/** - * @} - */ - -/** @defgroup UART_Exported_Functions_Group4 Peripheral State and Error functions - * @brief UART Peripheral State functions - * -@verbatim - ============================================================================== - ##### Peripheral State and Error functions ##### - ============================================================================== - [..] - This subsection provides functions allowing to : - (+) Return the UART handle state. - (+) Return the UART handle error code - -@endverbatim - * @{ - */ - -/** - * @brief Return the UART handle state. - * @param huart Pointer to a UART_HandleTypeDef structure that contains - * the configuration information for the specified UART. - * @retval HAL state - */ -HAL_UART_StateTypeDef HAL_UART_GetState(UART_HandleTypeDef *huart) -{ - uint32_t temp1, temp2; - temp1 = huart->gState; - temp2 = huart->RxState; - - return (HAL_UART_StateTypeDef)(temp1 | temp2); -} - -/** - * @brief Return the UART handle error code. - * @param huart Pointer to a UART_HandleTypeDef structure that contains - * the configuration information for the specified UART. - * @retval UART Error Code -*/ -uint32_t HAL_UART_GetError(UART_HandleTypeDef *huart) -{ - return huart->ErrorCode; -} -/** - * @} - */ - -/** - * @} - */ - -/** @defgroup UART_Private_Functions UART Private Functions - * @{ - */ - -/** - * @brief Initialize the callbacks to their default values. - * @param huart UART handle. - * @retval none - */ -#if (USE_HAL_UART_REGISTER_CALLBACKS == 1) -void UART_InitCallbacksToDefault(UART_HandleTypeDef *huart) -{ - /* Init the UART Callback settings */ - huart->TxHalfCpltCallback = HAL_UART_TxHalfCpltCallback; /* Legacy weak TxHalfCpltCallback */ - huart->TxCpltCallback = HAL_UART_TxCpltCallback; /* Legacy weak TxCpltCallback */ - huart->RxHalfCpltCallback = HAL_UART_RxHalfCpltCallback; /* Legacy weak RxHalfCpltCallback */ - huart->RxCpltCallback = HAL_UART_RxCpltCallback; /* Legacy weak RxCpltCallback */ - huart->ErrorCallback = HAL_UART_ErrorCallback; /* Legacy weak ErrorCallback */ - huart->AbortCpltCallback = HAL_UART_AbortCpltCallback; /* Legacy weak AbortCpltCallback */ - huart->AbortTransmitCpltCallback = HAL_UART_AbortTransmitCpltCallback; /* Legacy weak AbortTransmitCpltCallback */ - huart->AbortReceiveCpltCallback = HAL_UART_AbortReceiveCpltCallback; /* Legacy weak AbortReceiveCpltCallback */ - -} -#endif /* USE_HAL_UART_REGISTER_CALLBACKS */ - -/** - * @brief Configure the UART peripheral. - * @param huart UART handle. - * @retval HAL status - */ -HAL_StatusTypeDef UART_SetConfig(UART_HandleTypeDef *huart) -{ - uint32_t tmpreg; - uint16_t brrtemp; - UART_ClockSourceTypeDef clocksource; - uint32_t usartdiv = 0x00000000U; - HAL_StatusTypeDef ret = HAL_OK; - - /* Check the parameters */ - assert_param(IS_UART_BAUDRATE(huart->Init.BaudRate)); - assert_param(IS_UART_WORD_LENGTH(huart->Init.WordLength)); - assert_param(IS_UART_STOPBITS(huart->Init.StopBits)); - assert_param(IS_UART_ONE_BIT_SAMPLE(huart->Init.OneBitSampling)); - - assert_param(IS_UART_PARITY(huart->Init.Parity)); - assert_param(IS_UART_MODE(huart->Init.Mode)); - assert_param(IS_UART_HARDWARE_FLOW_CONTROL(huart->Init.HwFlowCtl)); - assert_param(IS_UART_OVERSAMPLING(huart->Init.OverSampling)); - - /*-------------------------- USART CR1 Configuration -----------------------*/ - /* Clear M, PCE, PS, TE, RE and OVER8 bits and configure - * the UART Word Length, Parity, Mode and oversampling: - * set the M bits according to huart->Init.WordLength value - * set PCE and PS bits according to huart->Init.Parity value - * set TE and RE bits according to huart->Init.Mode value - * set OVER8 bit according to huart->Init.OverSampling value */ - tmpreg = (uint32_t)huart->Init.WordLength | huart->Init.Parity | huart->Init.Mode | huart->Init.OverSampling ; - MODIFY_REG(huart->Instance->CR1, USART_CR1_FIELDS, tmpreg); - - /*-------------------------- USART CR2 Configuration -----------------------*/ - /* Configure the UART Stop Bits: Set STOP[13:12] bits according - * to huart->Init.StopBits value */ - MODIFY_REG(huart->Instance->CR2, USART_CR2_STOP, huart->Init.StopBits); - - /*-------------------------- USART CR3 Configuration -----------------------*/ - /* Configure - * - UART HardWare Flow Control: set CTSE and RTSE bits according - * to huart->Init.HwFlowCtl value - * - one-bit sampling method versus three samples' majority rule according - * to huart->Init.OneBitSampling (not applicable to LPUART) */ - tmpreg = (uint32_t)huart->Init.HwFlowCtl; - - tmpreg |= huart->Init.OneBitSampling; - MODIFY_REG(huart->Instance->CR3, USART_CR3_FIELDS, tmpreg); - - - /*-------------------------- USART BRR Configuration -----------------------*/ - UART_GETCLOCKSOURCE(huart, clocksource); - - if (huart->Init.OverSampling == UART_OVERSAMPLING_8) - { - switch (clocksource) - { - case UART_CLOCKSOURCE_PCLK1: - usartdiv = (uint16_t)(UART_DIV_SAMPLING8(HAL_RCC_GetPCLK1Freq(), huart->Init.BaudRate)); - break; - case UART_CLOCKSOURCE_PCLK2: - usartdiv = (uint16_t)(UART_DIV_SAMPLING8(HAL_RCC_GetPCLK2Freq(), huart->Init.BaudRate)); - break; - case UART_CLOCKSOURCE_HSI: - usartdiv = (uint16_t)(UART_DIV_SAMPLING8(HSI_VALUE, huart->Init.BaudRate)); - break; - case UART_CLOCKSOURCE_SYSCLK: - usartdiv = (uint16_t)(UART_DIV_SAMPLING8(HAL_RCC_GetSysClockFreq(), huart->Init.BaudRate)); - break; - case UART_CLOCKSOURCE_LSE: - usartdiv = (uint16_t)(UART_DIV_SAMPLING8(LSE_VALUE, huart->Init.BaudRate)); - break; - case UART_CLOCKSOURCE_UNDEFINED: - default: - ret = HAL_ERROR; - break; - } - - /* USARTDIV must be greater than or equal to 0d16 */ - if ((usartdiv >= UART_BRR_MIN) && (usartdiv <= UART_BRR_MAX)) - { - brrtemp = (uint16_t)(usartdiv & 0xFFF0U); - brrtemp |= (uint16_t)((usartdiv & (uint16_t)0x000FU) >> 1U); - huart->Instance->BRR = brrtemp; - } - else - { - ret = HAL_ERROR; - } - } - else - { - switch (clocksource) - { - case UART_CLOCKSOURCE_PCLK1: - usartdiv = (uint16_t)(UART_DIV_SAMPLING16(HAL_RCC_GetPCLK1Freq(), huart->Init.BaudRate)); - break; - case UART_CLOCKSOURCE_PCLK2: - usartdiv = (uint16_t)(UART_DIV_SAMPLING16(HAL_RCC_GetPCLK2Freq(), huart->Init.BaudRate)); - break; - case UART_CLOCKSOURCE_HSI: - usartdiv = (uint16_t)(UART_DIV_SAMPLING16(HSI_VALUE, huart->Init.BaudRate)); - break; - case UART_CLOCKSOURCE_SYSCLK: - usartdiv = (uint16_t)(UART_DIV_SAMPLING16(HAL_RCC_GetSysClockFreq(), huart->Init.BaudRate)); - break; - case UART_CLOCKSOURCE_LSE: - usartdiv = (uint16_t)(UART_DIV_SAMPLING16(LSE_VALUE, huart->Init.BaudRate)); - break; - case UART_CLOCKSOURCE_UNDEFINED: - default: - ret = HAL_ERROR; - break; - } - - /* USARTDIV must be greater than or equal to 0d16 */ - if ((usartdiv >= UART_BRR_MIN) && (usartdiv <= UART_BRR_MAX)) - { - huart->Instance->BRR = usartdiv; - } - else - { - ret = HAL_ERROR; - } - } - - - /* Clear ISR function pointers */ - huart->RxISR = NULL; - huart->TxISR = NULL; - - return ret; -} - -/** - * @brief Configure the UART peripheral advanced features. - * @param huart UART handle. - * @retval None - */ -void UART_AdvFeatureConfig(UART_HandleTypeDef *huart) -{ - /* Check whether the set of advanced features to configure is properly set */ - assert_param(IS_UART_ADVFEATURE_INIT(huart->AdvancedInit.AdvFeatureInit)); - - /* if required, configure TX pin active level inversion */ - if (HAL_IS_BIT_SET(huart->AdvancedInit.AdvFeatureInit, UART_ADVFEATURE_TXINVERT_INIT)) - { - assert_param(IS_UART_ADVFEATURE_TXINV(huart->AdvancedInit.TxPinLevelInvert)); - MODIFY_REG(huart->Instance->CR2, USART_CR2_TXINV, huart->AdvancedInit.TxPinLevelInvert); - } - - /* if required, configure RX pin active level inversion */ - if (HAL_IS_BIT_SET(huart->AdvancedInit.AdvFeatureInit, UART_ADVFEATURE_RXINVERT_INIT)) - { - assert_param(IS_UART_ADVFEATURE_RXINV(huart->AdvancedInit.RxPinLevelInvert)); - MODIFY_REG(huart->Instance->CR2, USART_CR2_RXINV, huart->AdvancedInit.RxPinLevelInvert); - } - - /* if required, configure data inversion */ - if (HAL_IS_BIT_SET(huart->AdvancedInit.AdvFeatureInit, UART_ADVFEATURE_DATAINVERT_INIT)) - { - assert_param(IS_UART_ADVFEATURE_DATAINV(huart->AdvancedInit.DataInvert)); - MODIFY_REG(huart->Instance->CR2, USART_CR2_DATAINV, huart->AdvancedInit.DataInvert); - } - - /* if required, configure RX/TX pins swap */ - if (HAL_IS_BIT_SET(huart->AdvancedInit.AdvFeatureInit, UART_ADVFEATURE_SWAP_INIT)) - { - assert_param(IS_UART_ADVFEATURE_SWAP(huart->AdvancedInit.Swap)); - MODIFY_REG(huart->Instance->CR2, USART_CR2_SWAP, huart->AdvancedInit.Swap); - } - - /* if required, configure RX overrun detection disabling */ - if (HAL_IS_BIT_SET(huart->AdvancedInit.AdvFeatureInit, UART_ADVFEATURE_RXOVERRUNDISABLE_INIT)) - { - assert_param(IS_UART_OVERRUN(huart->AdvancedInit.OverrunDisable)); - MODIFY_REG(huart->Instance->CR3, USART_CR3_OVRDIS, huart->AdvancedInit.OverrunDisable); - } - - /* if required, configure DMA disabling on reception error */ - if (HAL_IS_BIT_SET(huart->AdvancedInit.AdvFeatureInit, UART_ADVFEATURE_DMADISABLEONERROR_INIT)) - { - assert_param(IS_UART_ADVFEATURE_DMAONRXERROR(huart->AdvancedInit.DMADisableonRxError)); - MODIFY_REG(huart->Instance->CR3, USART_CR3_DDRE, huart->AdvancedInit.DMADisableonRxError); - } - - /* if required, configure auto Baud rate detection scheme */ - if (HAL_IS_BIT_SET(huart->AdvancedInit.AdvFeatureInit, UART_ADVFEATURE_AUTOBAUDRATE_INIT)) - { - assert_param(IS_USART_AUTOBAUDRATE_DETECTION_INSTANCE(huart->Instance)); - assert_param(IS_UART_ADVFEATURE_AUTOBAUDRATE(huart->AdvancedInit.AutoBaudRateEnable)); - MODIFY_REG(huart->Instance->CR2, USART_CR2_ABREN, huart->AdvancedInit.AutoBaudRateEnable); - /* set auto Baudrate detection parameters if detection is enabled */ - if (huart->AdvancedInit.AutoBaudRateEnable == UART_ADVFEATURE_AUTOBAUDRATE_ENABLE) - { - assert_param(IS_UART_ADVFEATURE_AUTOBAUDRATEMODE(huart->AdvancedInit.AutoBaudRateMode)); - MODIFY_REG(huart->Instance->CR2, USART_CR2_ABRMODE, huart->AdvancedInit.AutoBaudRateMode); - } - } - - /* if required, configure MSB first on communication line */ - if (HAL_IS_BIT_SET(huart->AdvancedInit.AdvFeatureInit, UART_ADVFEATURE_MSBFIRST_INIT)) - { - assert_param(IS_UART_ADVFEATURE_MSBFIRST(huart->AdvancedInit.MSBFirst)); - MODIFY_REG(huart->Instance->CR2, USART_CR2_MSBFIRST, huart->AdvancedInit.MSBFirst); - } -} - -/** - * @brief Check the UART Idle State. - * @param huart UART handle. - * @retval HAL status - */ -HAL_StatusTypeDef UART_CheckIdleState(UART_HandleTypeDef *huart) -{ - uint32_t tickstart; - - /* Initialize the UART ErrorCode */ - huart->ErrorCode = HAL_UART_ERROR_NONE; - - /* Init tickstart for timeout managment*/ - tickstart = HAL_GetTick(); - - /* Check if the Transmitter is enabled */ - if ((huart->Instance->CR1 & USART_CR1_TE) == USART_CR1_TE) - { - /* Wait until TEACK flag is set */ - if (UART_WaitOnFlagUntilTimeout(huart, USART_ISR_TEACK, RESET, tickstart, HAL_UART_TIMEOUT_VALUE) != HAL_OK) - { - /* Timeout occurred */ - return HAL_TIMEOUT; - } - } - - /* Initialize the UART State */ - huart->gState = HAL_UART_STATE_READY; - huart->RxState = HAL_UART_STATE_READY; - - /* Process Unlocked */ - __HAL_UNLOCK(huart); - - return HAL_OK; -} - -/** - * @brief Handle UART Communication Timeout. - * @param huart UART handle. - * @param Flag Specifies the UART flag to check - * @param Status Flag status (SET or RESET) - * @param Tickstart Tick start value - * @param Timeout Timeout duration - * @retval HAL status - */ -HAL_StatusTypeDef UART_WaitOnFlagUntilTimeout(UART_HandleTypeDef *huart, uint32_t Flag, FlagStatus Status, uint32_t Tickstart, uint32_t Timeout) -{ - /* Wait until flag is set */ - while ((__HAL_UART_GET_FLAG(huart, Flag) ? SET : RESET) == Status) - { - /* Check for the Timeout */ - if (Timeout != HAL_MAX_DELAY) - { - if (((HAL_GetTick() - Tickstart) > Timeout) || (Timeout == 0U)) - { - /* Disable TXE, RXNE, PE and ERR (Frame error, noise error, overrun error) interrupts for the interrupt process */ - CLEAR_BIT(huart->Instance->CR1, (USART_CR1_RXNEIE | USART_CR1_PEIE | USART_CR1_TXEIE)); - CLEAR_BIT(huart->Instance->CR3, USART_CR3_EIE); - - huart->gState = HAL_UART_STATE_READY; - huart->RxState = HAL_UART_STATE_READY; - - /* Process Unlocked */ - __HAL_UNLOCK(huart); - - return HAL_TIMEOUT; - } - } - } - return HAL_OK; -} - - -/** - * @brief End ongoing Tx transfer on UART peripheral (following error detection or Transmit completion). - * @param huart UART handle. - * @retval None - */ -static void UART_EndTxTransfer(UART_HandleTypeDef *huart) -{ - /* Disable TXEIE and TCIE interrupts */ - CLEAR_BIT(huart->Instance->CR1, (USART_CR1_TXEIE | USART_CR1_TCIE)); - - /* At end of Tx process, restore huart->gState to Ready */ - huart->gState = HAL_UART_STATE_READY; -} - - -/** - * @brief End ongoing Rx transfer on UART peripheral (following error detection or Reception completion). - * @param huart UART handle. - * @retval None - */ -static void UART_EndRxTransfer(UART_HandleTypeDef *huart) -{ - /* Disable RXNE, PE and ERR (Frame error, noise error, overrun error) interrupts */ - CLEAR_BIT(huart->Instance->CR1, (USART_CR1_RXNEIE | USART_CR1_PEIE)); - CLEAR_BIT(huart->Instance->CR3, USART_CR3_EIE); - - /* At end of Rx process, restore huart->RxState to Ready */ - huart->RxState = HAL_UART_STATE_READY; - - /* Reset RxIsr function pointer */ - huart->RxISR = NULL; -} - - -/** - * @brief DMA UART transmit process complete callback. - * @param hdma DMA handle. - * @retval None - */ -static void UART_DMATransmitCplt(DMA_HandleTypeDef *hdma) -{ - UART_HandleTypeDef *huart = (UART_HandleTypeDef *)(hdma->Parent); - - /* DMA Normal mode */ - if (hdma->Init.Mode != DMA_CIRCULAR) - { - huart->TxXferCount = 0U; - - /* Disable the DMA transfer for transmit request by resetting the DMAT bit - in the UART CR3 register */ - CLEAR_BIT(huart->Instance->CR3, USART_CR3_DMAT); - - /* Enable the UART Transmit Complete Interrupt */ - SET_BIT(huart->Instance->CR1, USART_CR1_TCIE); - } - /* DMA Circular mode */ - else - { -#if (USE_HAL_UART_REGISTER_CALLBACKS == 1) - /*Call registered Tx complete callback*/ - huart->TxCpltCallback(huart); -#else - /*Call legacy weak Tx complete callback*/ - HAL_UART_TxCpltCallback(huart); -#endif /* USE_HAL_UART_REGISTER_CALLBACKS */ - } -} - -/** - * @brief DMA UART transmit process half complete callback. - * @param hdma DMA handle. - * @retval None - */ -static void UART_DMATxHalfCplt(DMA_HandleTypeDef *hdma) -{ - UART_HandleTypeDef *huart = (UART_HandleTypeDef *)(hdma->Parent); - -#if (USE_HAL_UART_REGISTER_CALLBACKS == 1) - /*Call registered Tx Half complete callback*/ - huart->TxHalfCpltCallback(huart); -#else - /*Call legacy weak Tx Half complete callback*/ - HAL_UART_TxHalfCpltCallback(huart); -#endif /* USE_HAL_UART_REGISTER_CALLBACKS */ -} - -/** - * @brief DMA UART receive process complete callback. - * @param hdma DMA handle. - * @retval None - */ -static void UART_DMAReceiveCplt(DMA_HandleTypeDef *hdma) -{ - UART_HandleTypeDef *huart = (UART_HandleTypeDef *)(hdma->Parent); - - /* DMA Normal mode */ - if (hdma->Init.Mode != DMA_CIRCULAR) - { - huart->RxXferCount = 0U; - - /* Disable PE and ERR (Frame error, noise error, overrun error) interrupts */ - CLEAR_BIT(huart->Instance->CR1, USART_CR1_PEIE); - CLEAR_BIT(huart->Instance->CR3, USART_CR3_EIE); - - /* Disable the DMA transfer for the receiver request by resetting the DMAR bit - in the UART CR3 register */ - CLEAR_BIT(huart->Instance->CR3, USART_CR3_DMAR); - - /* At end of Rx process, restore huart->RxState to Ready */ - huart->RxState = HAL_UART_STATE_READY; - } - -#if (USE_HAL_UART_REGISTER_CALLBACKS == 1) - /*Call registered Rx complete callback*/ - huart->RxCpltCallback(huart); -#else - /*Call legacy weak Rx complete callback*/ - HAL_UART_RxCpltCallback(huart); -#endif /* USE_HAL_UART_REGISTER_CALLBACKS */ -} - -/** - * @brief DMA UART receive process half complete callback. - * @param hdma DMA handle. - * @retval None - */ -static void UART_DMARxHalfCplt(DMA_HandleTypeDef *hdma) -{ - UART_HandleTypeDef *huart = (UART_HandleTypeDef *)(hdma->Parent); - -#if (USE_HAL_UART_REGISTER_CALLBACKS == 1) - /*Call registered Rx Half complete callback*/ - huart->RxHalfCpltCallback(huart); -#else - /*Call legacy weak Rx Half complete callback*/ - HAL_UART_RxHalfCpltCallback(huart); -#endif /* USE_HAL_UART_REGISTER_CALLBACKS */ -} - -/** - * @brief DMA UART communication error callback. - * @param hdma DMA handle. - * @retval None - */ -static void UART_DMAError(DMA_HandleTypeDef *hdma) -{ - UART_HandleTypeDef *huart = (UART_HandleTypeDef *)(hdma->Parent); - - const HAL_UART_StateTypeDef gstate = huart->gState; - const HAL_UART_StateTypeDef rxstate = huart->RxState; - - /* Stop UART DMA Tx request if ongoing */ - if ((HAL_IS_BIT_SET(huart->Instance->CR3, USART_CR3_DMAT)) && - (gstate == HAL_UART_STATE_BUSY_TX)) - { - huart->TxXferCount = 0U; - UART_EndTxTransfer(huart); - } - - /* Stop UART DMA Rx request if ongoing */ - if ((HAL_IS_BIT_SET(huart->Instance->CR3, USART_CR3_DMAR)) && - (rxstate == HAL_UART_STATE_BUSY_RX)) - { - huart->RxXferCount = 0U; - UART_EndRxTransfer(huart); - } - - huart->ErrorCode |= HAL_UART_ERROR_DMA; - -#if (USE_HAL_UART_REGISTER_CALLBACKS == 1) - /*Call registered error callback*/ - huart->ErrorCallback(huart); -#else - /*Call legacy weak error callback*/ - HAL_UART_ErrorCallback(huart); -#endif /* USE_HAL_UART_REGISTER_CALLBACKS */ -} - -/** - * @brief DMA UART communication abort callback, when initiated by HAL services on Error - * (To be called at end of DMA Abort procedure following error occurrence). - * @param hdma DMA handle. - * @retval None - */ -static void UART_DMAAbortOnError(DMA_HandleTypeDef *hdma) -{ - UART_HandleTypeDef *huart = (UART_HandleTypeDef *)(hdma->Parent); - huart->RxXferCount = 0U; - huart->TxXferCount = 0U; - -#if (USE_HAL_UART_REGISTER_CALLBACKS == 1) - /*Call registered error callback*/ - huart->ErrorCallback(huart); -#else - /*Call legacy weak error callback*/ - HAL_UART_ErrorCallback(huart); -#endif /* USE_HAL_UART_REGISTER_CALLBACKS */ -} - -/** - * @brief DMA UART Tx communication abort callback, when initiated by user - * (To be called at end of DMA Tx Abort procedure following user abort request). - * @note When this callback is executed, User Abort complete call back is called only if no - * Abort still ongoing for Rx DMA Handle. - * @param hdma DMA handle. - * @retval None - */ -static void UART_DMATxAbortCallback(DMA_HandleTypeDef *hdma) -{ - UART_HandleTypeDef *huart = (UART_HandleTypeDef *)(hdma->Parent); - - huart->hdmatx->XferAbortCallback = NULL; - - /* Check if an Abort process is still ongoing */ - if (huart->hdmarx != NULL) - { - if (huart->hdmarx->XferAbortCallback != NULL) - { - return; - } - } - - /* No Abort process still ongoing : All DMA channels are aborted, call user Abort Complete callback */ - huart->TxXferCount = 0U; - huart->RxXferCount = 0U; - - /* Reset errorCode */ - huart->ErrorCode = HAL_UART_ERROR_NONE; - - /* Clear the Error flags in the ICR register */ - __HAL_UART_CLEAR_FLAG(huart, UART_CLEAR_OREF | UART_CLEAR_NEF | UART_CLEAR_PEF | UART_CLEAR_FEF); - - - /* Restore huart->gState and huart->RxState to Ready */ - huart->gState = HAL_UART_STATE_READY; - huart->RxState = HAL_UART_STATE_READY; - - /* Call user Abort complete callback */ -#if (USE_HAL_UART_REGISTER_CALLBACKS == 1) - /* Call registered Abort complete callback */ - huart->AbortCpltCallback(huart); -#else - /* Call legacy weak Abort complete callback */ - HAL_UART_AbortCpltCallback(huart); -#endif /* USE_HAL_UART_REGISTER_CALLBACKS */ -} - - -/** - * @brief DMA UART Rx communication abort callback, when initiated by user - * (To be called at end of DMA Rx Abort procedure following user abort request). - * @note When this callback is executed, User Abort complete call back is called only if no - * Abort still ongoing for Tx DMA Handle. - * @param hdma DMA handle. - * @retval None - */ -static void UART_DMARxAbortCallback(DMA_HandleTypeDef *hdma) -{ - UART_HandleTypeDef *huart = (UART_HandleTypeDef *)(hdma->Parent); - - huart->hdmarx->XferAbortCallback = NULL; - - /* Check if an Abort process is still ongoing */ - if (huart->hdmatx != NULL) - { - if (huart->hdmatx->XferAbortCallback != NULL) - { - return; - } - } - - /* No Abort process still ongoing : All DMA channels are aborted, call user Abort Complete callback */ - huart->TxXferCount = 0U; - huart->RxXferCount = 0U; - - /* Reset errorCode */ - huart->ErrorCode = HAL_UART_ERROR_NONE; - - /* Clear the Error flags in the ICR register */ - __HAL_UART_CLEAR_FLAG(huart, UART_CLEAR_OREF | UART_CLEAR_NEF | UART_CLEAR_PEF | UART_CLEAR_FEF); - - /* Discard the received data */ - __HAL_UART_SEND_REQ(huart, UART_RXDATA_FLUSH_REQUEST); - - /* Restore huart->gState and huart->RxState to Ready */ - huart->gState = HAL_UART_STATE_READY; - huart->RxState = HAL_UART_STATE_READY; - - /* Call user Abort complete callback */ -#if (USE_HAL_UART_REGISTER_CALLBACKS == 1) - /* Call registered Abort complete callback */ - huart->AbortCpltCallback(huart); -#else - /* Call legacy weak Abort complete callback */ - HAL_UART_AbortCpltCallback(huart); -#endif /* USE_HAL_UART_REGISTER_CALLBACKS */ -} - - -/** - * @brief DMA UART Tx communication abort callback, when initiated by user by a call to - * HAL_UART_AbortTransmit_IT API (Abort only Tx transfer) - * (This callback is executed at end of DMA Tx Abort procedure following user abort request, - * and leads to user Tx Abort Complete callback execution). - * @param hdma DMA handle. - * @retval None - */ -static void UART_DMATxOnlyAbortCallback(DMA_HandleTypeDef *hdma) -{ - UART_HandleTypeDef *huart = (UART_HandleTypeDef *)(hdma->Parent); - - huart->TxXferCount = 0U; - - - /* Restore huart->gState to Ready */ - huart->gState = HAL_UART_STATE_READY; - - /* Call user Abort complete callback */ -#if (USE_HAL_UART_REGISTER_CALLBACKS == 1) - /* Call registered Abort Transmit Complete Callback */ - huart->AbortTransmitCpltCallback(huart); -#else - /* Call legacy weak Abort Transmit Complete Callback */ - HAL_UART_AbortTransmitCpltCallback(huart); -#endif /* USE_HAL_UART_REGISTER_CALLBACKS */ -} - -/** - * @brief DMA UART Rx communication abort callback, when initiated by user by a call to - * HAL_UART_AbortReceive_IT API (Abort only Rx transfer) - * (This callback is executed at end of DMA Rx Abort procedure following user abort request, - * and leads to user Rx Abort Complete callback execution). - * @param hdma DMA handle. - * @retval None - */ -static void UART_DMARxOnlyAbortCallback(DMA_HandleTypeDef *hdma) -{ - UART_HandleTypeDef *huart = (UART_HandleTypeDef *)((DMA_HandleTypeDef *)hdma)->Parent; - - huart->RxXferCount = 0U; - - /* Clear the Error flags in the ICR register */ - __HAL_UART_CLEAR_FLAG(huart, UART_CLEAR_OREF | UART_CLEAR_NEF | UART_CLEAR_PEF | UART_CLEAR_FEF); - - /* Discard the received data */ - __HAL_UART_SEND_REQ(huart, UART_RXDATA_FLUSH_REQUEST); - - /* Restore huart->RxState to Ready */ - huart->RxState = HAL_UART_STATE_READY; - - /* Call user Abort complete callback */ -#if (USE_HAL_UART_REGISTER_CALLBACKS == 1) - /* Call registered Abort Receive Complete Callback */ - huart->AbortReceiveCpltCallback(huart); -#else - /* Call legacy weak Abort Receive Complete Callback */ - HAL_UART_AbortReceiveCpltCallback(huart); -#endif /* USE_HAL_UART_REGISTER_CALLBACKS */ -} - -/** - * @brief TX interrrupt handler for 7 or 8 bits data word length . - * @note Function is called under interruption only, once - * interruptions have been enabled by HAL_UART_Transmit_IT(). - * @param huart UART handle. - * @retval None - */ -static void UART_TxISR_8BIT(UART_HandleTypeDef *huart) -{ - /* Check that a Tx process is ongoing */ - if (huart->gState == HAL_UART_STATE_BUSY_TX) - { - if (huart->TxXferCount == 0U) - { - /* Disable the UART Transmit Data Register Empty Interrupt */ - CLEAR_BIT(huart->Instance->CR1, USART_CR1_TXEIE); - - /* Enable the UART Transmit Complete Interrupt */ - SET_BIT(huart->Instance->CR1, USART_CR1_TCIE); - } - else - { - huart->Instance->TDR = (uint8_t)(*huart->pTxBuffPtr & (uint8_t)0xFF); - huart->pTxBuffPtr++; - huart->TxXferCount--; - } - } -} - -/** - * @brief TX interrrupt handler for 9 bits data word length. - * @note Function is called under interruption only, once - * interruptions have been enabled by HAL_UART_Transmit_IT(). - * @param huart UART handle. - * @retval None - */ -static void UART_TxISR_16BIT(UART_HandleTypeDef *huart) -{ - uint16_t *tmp; - - /* Check that a Tx process is ongoing */ - if (huart->gState == HAL_UART_STATE_BUSY_TX) - { - if (huart->TxXferCount == 0U) - { - /* Disable the UART Transmit Data Register Empty Interrupt */ - CLEAR_BIT(huart->Instance->CR1, USART_CR1_TXEIE); - - /* Enable the UART Transmit Complete Interrupt */ - SET_BIT(huart->Instance->CR1, USART_CR1_TCIE); - } - else - { - tmp = (uint16_t *) huart->pTxBuffPtr; - huart->Instance->TDR = (((uint32_t)(*tmp)) & 0x01FFUL); - huart->pTxBuffPtr += 2U; - huart->TxXferCount--; - } - } -} - - -/** - * @brief Wrap up transmission in non-blocking mode. - * @param huart pointer to a UART_HandleTypeDef structure that contains - * the configuration information for the specified UART module. - * @retval None - */ -static void UART_EndTransmit_IT(UART_HandleTypeDef *huart) -{ - /* Disable the UART Transmit Complete Interrupt */ - CLEAR_BIT(huart->Instance->CR1, USART_CR1_TCIE); - - /* Tx process is ended, restore huart->gState to Ready */ - huart->gState = HAL_UART_STATE_READY; - - /* Cleat TxISR function pointer */ - huart->TxISR = NULL; - -#if (USE_HAL_UART_REGISTER_CALLBACKS == 1) - /*Call registered Tx complete callback*/ - huart->TxCpltCallback(huart); -#else - /*Call legacy weak Tx complete callback*/ - HAL_UART_TxCpltCallback(huart); -#endif /* USE_HAL_UART_REGISTER_CALLBACKS */ -} - -/** - * @brief RX interrrupt handler for 7 or 8 bits data word length . - * @param huart UART handle. - * @retval None - */ -static void UART_RxISR_8BIT(UART_HandleTypeDef *huart) -{ - uint16_t uhMask = huart->Mask; - uint16_t uhdata; - - /* Check that a Rx process is ongoing */ - if (huart->RxState == HAL_UART_STATE_BUSY_RX) - { - uhdata = (uint16_t) READ_REG(huart->Instance->RDR); - *huart->pRxBuffPtr = (uint8_t)(uhdata & (uint8_t)uhMask); - huart->pRxBuffPtr++; - huart->RxXferCount--; - - if (huart->RxXferCount == 0U) - { - /* Disable the UART Parity Error Interrupt and RXNE interrupts */ - CLEAR_BIT(huart->Instance->CR1, (USART_CR1_RXNEIE | USART_CR1_PEIE)); - - /* Disable the UART Error Interrupt: (Frame error, noise error, overrun error) */ - CLEAR_BIT(huart->Instance->CR3, USART_CR3_EIE); - - /* Rx process is completed, restore huart->RxState to Ready */ - huart->RxState = HAL_UART_STATE_READY; - - /* Clear RxISR function pointer */ - huart->RxISR = NULL; - -#if (USE_HAL_UART_REGISTER_CALLBACKS == 1) - /*Call registered Rx complete callback*/ - huart->RxCpltCallback(huart); -#else - /*Call legacy weak Rx complete callback*/ - HAL_UART_RxCpltCallback(huart); -#endif /* USE_HAL_UART_REGISTER_CALLBACKS */ - } - } - else - { - /* Clear RXNE interrupt flag */ - __HAL_UART_SEND_REQ(huart, UART_RXDATA_FLUSH_REQUEST); - } -} - -/** - * @brief RX interrrupt handler for 9 bits data word length . - * @note Function is called under interruption only, once - * interruptions have been enabled by HAL_UART_Receive_IT() - * @param huart UART handle. - * @retval None - */ -static void UART_RxISR_16BIT(UART_HandleTypeDef *huart) -{ - uint16_t *tmp; - uint16_t uhMask = huart->Mask; - uint16_t uhdata; - - /* Check that a Rx process is ongoing */ - if (huart->RxState == HAL_UART_STATE_BUSY_RX) - { - uhdata = (uint16_t) READ_REG(huart->Instance->RDR); - tmp = (uint16_t *) huart->pRxBuffPtr ; - *tmp = (uint16_t)(uhdata & uhMask); - huart->pRxBuffPtr += 2U; - huart->RxXferCount--; - - if (huart->RxXferCount == 0U) - { - /* Disable the UART Parity Error Interrupt and RXNE interrupt*/ - CLEAR_BIT(huart->Instance->CR1, (USART_CR1_RXNEIE | USART_CR1_PEIE)); - - /* Disable the UART Error Interrupt: (Frame error, noise error, overrun error) */ - CLEAR_BIT(huart->Instance->CR3, USART_CR3_EIE); - - /* Rx process is completed, restore huart->RxState to Ready */ - huart->RxState = HAL_UART_STATE_READY; - - /* Clear RxISR function pointer */ - huart->RxISR = NULL; - -#if (USE_HAL_UART_REGISTER_CALLBACKS == 1) - /*Call registered Rx complete callback*/ - huart->RxCpltCallback(huart); -#else - /*Call legacy weak Rx complete callback*/ - HAL_UART_RxCpltCallback(huart); -#endif /* USE_HAL_UART_REGISTER_CALLBACKS */ - } - } - else - { - /* Clear RXNE interrupt flag */ - __HAL_UART_SEND_REQ(huart, UART_RXDATA_FLUSH_REQUEST); - } -} - - -/** - * @} - */ - -#endif /* HAL_UART_MODULE_ENABLED */ -/** - * @} - */ - -/** - * @} - */ - -/************************ (C) COPYRIGHT STMicroelectronics *****END OF FILE****/ diff --git a/test_dma/Drivers/STM32F7xx_HAL_Driver/Src/stm32f7xx_hal_uart_ex.c b/test_dma/Drivers/STM32F7xx_HAL_Driver/Src/stm32f7xx_hal_uart_ex.c deleted file mode 100644 index 415fb56..0000000 --- a/test_dma/Drivers/STM32F7xx_HAL_Driver/Src/stm32f7xx_hal_uart_ex.c +++ /dev/null @@ -1,330 +0,0 @@ -/** - ****************************************************************************** - * @file stm32f7xx_hal_uart_ex.c - * @author MCD Application Team - * @brief Extended UART HAL module driver. - * This file provides firmware functions to manage the following extended - * functionalities of the Universal Asynchronous Receiver Transmitter Peripheral (UART). - * + Initialization and de-initialization functions - * + Peripheral Control functions - * - * - @verbatim - ============================================================================== - ##### UART peripheral extended features ##### - ============================================================================== - - (#) Declare a UART_HandleTypeDef handle structure. - - (#) For the UART RS485 Driver Enable mode, initialize the UART registers - by calling the HAL_RS485Ex_Init() API. - - @endverbatim - ****************************************************************************** - * @attention - * - *

© Copyright (c) 2017 STMicroelectronics. - * All rights reserved.

- * - * This software component is licensed by ST under BSD 3-Clause license, - * the "License"; You may not use this file except in compliance with the - * License. You may obtain a copy of the License at: - * opensource.org/licenses/BSD-3-Clause - * - ****************************************************************************** - */ - -/* Includes ------------------------------------------------------------------*/ -#include "stm32f7xx_hal.h" - -/** @addtogroup STM32F7xx_HAL_Driver - * @{ - */ - -/** @defgroup UARTEx UARTEx - * @brief UART Extended HAL module driver - * @{ - */ - -#ifdef HAL_UART_MODULE_ENABLED - -/* Private typedef -----------------------------------------------------------*/ -/* Private define ------------------------------------------------------------*/ - -/* Private macros ------------------------------------------------------------*/ -/* Private variables ---------------------------------------------------------*/ -/* Private function prototypes -----------------------------------------------*/ -/** @defgroup UARTEx_Private_Functions UARTEx Private Functions - * @{ - */ -/** - * @} - */ - -/* Exported functions --------------------------------------------------------*/ - -/** @defgroup UARTEx_Exported_Functions UARTEx Exported Functions - * @{ - */ - -/** @defgroup UARTEx_Exported_Functions_Group1 Initialization and de-initialization functions - * @brief Extended Initialization and Configuration Functions - * -@verbatim -=============================================================================== - ##### Initialization and Configuration functions ##### - =============================================================================== - [..] - This subsection provides a set of functions allowing to initialize the USARTx or the UARTy - in asynchronous mode. - (+) For the asynchronous mode the parameters below can be configured: - (++) Baud Rate - (++) Word Length - (++) Stop Bit - (++) Parity: If the parity is enabled, then the MSB bit of the data written - in the data register is transmitted but is changed by the parity bit. - (++) Hardware flow control - (++) Receiver/transmitter modes - (++) Over Sampling Method - (++) One-Bit Sampling Method - (+) For the asynchronous mode, the following advanced features can be configured as well: - (++) TX and/or RX pin level inversion - (++) data logical level inversion - (++) RX and TX pins swap - (++) RX overrun detection disabling - (++) DMA disabling on RX error - (++) MSB first on communication line - (++) auto Baud rate detection - [..] - The HAL_RS485Ex_Init() API follows the UART RS485 mode configuration - procedures (details for the procedures are available in reference manual). - -@endverbatim - - Depending on the frame length defined by the M1 and M0 bits (7-bit, - 8-bit or 9-bit), the possible UART formats are listed in the - following table. - - Table 1. UART frame format. - +-----------------------------------------------------------------------+ - | M1 bit | M0 bit | PCE bit | UART frame | - |---------|---------|-----------|---------------------------------------| - | 0 | 0 | 0 | | SB | 8 bit data | STB | | - |---------|---------|-----------|---------------------------------------| - | 0 | 0 | 1 | | SB | 7 bit data | PB | STB | | - |---------|---------|-----------|---------------------------------------| - | 0 | 1 | 0 | | SB | 9 bit data | STB | | - |---------|---------|-----------|---------------------------------------| - | 0 | 1 | 1 | | SB | 8 bit data | PB | STB | | - |---------|---------|-----------|---------------------------------------| - | 1 | 0 | 0 | | SB | 7 bit data | STB | | - |---------|---------|-----------|---------------------------------------| - | 1 | 0 | 1 | | SB | 6 bit data | PB | STB | | - +-----------------------------------------------------------------------+ - - * @{ - */ - -/** - * @brief Initialize the RS485 Driver enable feature according to the specified - * parameters in the UART_InitTypeDef and creates the associated handle. - * @param huart UART handle. - * @param Polarity Select the driver enable polarity. - * This parameter can be one of the following values: - * @arg @ref UART_DE_POLARITY_HIGH DE signal is active high - * @arg @ref UART_DE_POLARITY_LOW DE signal is active low - * @param AssertionTime Driver Enable assertion time: - * 5-bit value defining the time between the activation of the DE (Driver Enable) - * signal and the beginning of the start bit. It is expressed in sample time - * units (1/8 or 1/16 bit time, depending on the oversampling rate) - * @param DeassertionTime Driver Enable deassertion time: - * 5-bit value defining the time between the end of the last stop bit, in a - * transmitted message, and the de-activation of the DE (Driver Enable) signal. - * It is expressed in sample time units (1/8 or 1/16 bit time, depending on the - * oversampling rate). - * @retval HAL status - */ -HAL_StatusTypeDef HAL_RS485Ex_Init(UART_HandleTypeDef *huart, uint32_t Polarity, uint32_t AssertionTime, uint32_t DeassertionTime) -{ - uint32_t temp; - - /* Check the UART handle allocation */ - if (huart == NULL) - { - return HAL_ERROR; - } - /* Check the Driver Enable UART instance */ - assert_param(IS_UART_DRIVER_ENABLE_INSTANCE(huart->Instance)); - - /* Check the Driver Enable polarity */ - assert_param(IS_UART_DE_POLARITY(Polarity)); - - /* Check the Driver Enable assertion time */ - assert_param(IS_UART_ASSERTIONTIME(AssertionTime)); - - /* Check the Driver Enable deassertion time */ - assert_param(IS_UART_DEASSERTIONTIME(DeassertionTime)); - - if (huart->gState == HAL_UART_STATE_RESET) - { - /* Allocate lock resource and initialize it */ - huart->Lock = HAL_UNLOCKED; - -#if (USE_HAL_UART_REGISTER_CALLBACKS == 1) - UART_InitCallbacksToDefault(huart); - - if (huart->MspInitCallback == NULL) - { - huart->MspInitCallback = HAL_UART_MspInit; - } - - /* Init the low level hardware */ - huart->MspInitCallback(huart); -#else - /* Init the low level hardware : GPIO, CLOCK, CORTEX */ - HAL_UART_MspInit(huart); -#endif /* (USE_HAL_UART_REGISTER_CALLBACKS) */ - } - - huart->gState = HAL_UART_STATE_BUSY; - - /* Disable the Peripheral */ - __HAL_UART_DISABLE(huart); - - /* Set the UART Communication parameters */ - if (UART_SetConfig(huart) == HAL_ERROR) - { - return HAL_ERROR; - } - - if (huart->AdvancedInit.AdvFeatureInit != UART_ADVFEATURE_NO_INIT) - { - UART_AdvFeatureConfig(huart); - } - - /* Enable the Driver Enable mode by setting the DEM bit in the CR3 register */ - SET_BIT(huart->Instance->CR3, USART_CR3_DEM); - - /* Set the Driver Enable polarity */ - MODIFY_REG(huart->Instance->CR3, USART_CR3_DEP, Polarity); - - /* Set the Driver Enable assertion and deassertion times */ - temp = (AssertionTime << UART_CR1_DEAT_ADDRESS_LSB_POS); - temp |= (DeassertionTime << UART_CR1_DEDT_ADDRESS_LSB_POS); - MODIFY_REG(huart->Instance->CR1, (USART_CR1_DEDT | USART_CR1_DEAT), temp); - - /* Enable the Peripheral */ - __HAL_UART_ENABLE(huart); - - /* TEACK and/or REACK to check before moving huart->gState and huart->RxState to Ready */ - return (UART_CheckIdleState(huart)); -} - -/** - * @} - */ - -/** @defgroup UARTEx_Exported_Functions_Group2 IO operation functions - * @brief Extended functions - * -@verbatim - =============================================================================== - ##### IO operation functions ##### - =============================================================================== - This subsection provides a set of Wakeup and FIFO mode related callback functions. - -@endverbatim - * @{ - */ - - -/** - * @} - */ - -/** @defgroup UARTEx_Exported_Functions_Group3 Peripheral Control functions - * @brief Extended Peripheral Control functions - * -@verbatim - =============================================================================== - ##### Peripheral Control functions ##### - =============================================================================== - [..] This section provides the following functions: - (+) HAL_MultiProcessorEx_AddressLength_Set() API optionally sets the UART node address - detection length to more than 4 bits for multiprocessor address mark wake up. - -@endverbatim - * @{ - */ - - - - -/** - * @brief By default in multiprocessor mode, when the wake up method is set - * to address mark, the UART handles only 4-bit long addresses detection; - * this API allows to enable longer addresses detection (6-, 7- or 8-bit - * long). - * @note Addresses detection lengths are: 6-bit address detection in 7-bit data mode, - * 7-bit address detection in 8-bit data mode, 8-bit address detection in 9-bit data mode. - * @param huart UART handle. - * @param AddressLength This parameter can be one of the following values: - * @arg @ref UART_ADDRESS_DETECT_4B 4-bit long address - * @arg @ref UART_ADDRESS_DETECT_7B 6-, 7- or 8-bit long address - * @retval HAL status - */ -HAL_StatusTypeDef HAL_MultiProcessorEx_AddressLength_Set(UART_HandleTypeDef *huart, uint32_t AddressLength) -{ - /* Check the UART handle allocation */ - if (huart == NULL) - { - return HAL_ERROR; - } - - /* Check the address length parameter */ - assert_param(IS_UART_ADDRESSLENGTH_DETECT(AddressLength)); - - huart->gState = HAL_UART_STATE_BUSY; - - /* Disable the Peripheral */ - __HAL_UART_DISABLE(huart); - - /* Set the address length */ - MODIFY_REG(huart->Instance->CR2, USART_CR2_ADDM7, AddressLength); - - /* Enable the Peripheral */ - __HAL_UART_ENABLE(huart); - - /* TEACK and/or REACK to check before moving huart->gState to Ready */ - return (UART_CheckIdleState(huart)); -} - - - -/** - * @} - */ - -/** - * @} - */ - -/** @addtogroup UARTEx_Private_Functions - * @{ - */ - -/** - * @} - */ - -#endif /* HAL_UART_MODULE_ENABLED */ - -/** - * @} - */ - -/** - * @} - */ - -/************************ (C) COPYRIGHT STMicroelectronics *****END OF FILE****/ diff --git a/test_dma/STM32F767ZITX_FLASH.ld b/test_dma/STM32F767ZITX_FLASH.ld deleted file mode 100644 index 67be470..0000000 --- a/test_dma/STM32F767ZITX_FLASH.ld +++ /dev/null @@ -1,200 +0,0 @@ -/* -****************************************************************************** -** -** File : LinkerScript.ld -** -** Author : Auto-generated by STM32CubeIDE -** -** Abstract : Linker script for STM32F767ZITx Device from stm32f7 series -** 2048Kbytes FLASH -** 512Kbytes RAM -** -** Set heap size, stack size and stack location according -** to application requirements. -** -** Set memory bank area and size if external memory is used. -** -** Target : STMicroelectronics STM32 -** -** Distribution: The file is distributed as is without any warranty -** of any kind. -** -***************************************************************************** -** @attention -** -**

© COPYRIGHT(c) 2020 STMicroelectronics

-** -** Redistribution and use in source and binary forms, with or without modification, -** are permitted provided that the following conditions are met: -** 1. Redistributions of source code must retain the above copyright notice, -** this list of conditions and the following disclaimer. -** 2. Redistributions in binary form must reproduce the above copyright notice, -** this list of conditions and the following disclaimer in the documentation -** and/or other materials provided with the distribution. -** 3. Neither the name of STMicroelectronics nor the names of its contributors -** may be used to endorse or promote products derived from this software -** without specific prior written permission. -** -** THIS SOFTWARE IS PROVIDED BY THE COPYRIGHT HOLDERS AND CONTRIBUTORS "AS IS" -** AND ANY EXPRESS OR IMPLIED WARRANTIES, INCLUDING, BUT NOT LIMITED TO, THE -** IMPLIED WARRANTIES OF MERCHANTABILITY AND FITNESS FOR A PARTICULAR PURPOSE ARE -** DISCLAIMED. IN NO EVENT SHALL THE COPYRIGHT HOLDER OR CONTRIBUTORS BE LIABLE -** FOR ANY DIRECT, INDIRECT, INCIDENTAL, SPECIAL, EXEMPLARY, OR CONSEQUENTIAL -** DAMAGES (INCLUDING, BUT NOT LIMITED TO, PROCUREMENT OF SUBSTITUTE GOODS OR -** SERVICES; LOSS OF USE, DATA, OR PROFITS; OR BUSINESS INTERRUPTION) HOWEVER -** CAUSED AND ON ANY THEORY OF LIABILITY, WHETHER IN CONTRACT, STRICT LIABILITY, -** OR TORT (INCLUDING NEGLIGENCE OR OTHERWISE) ARISING IN ANY WAY OUT OF THE USE -** OF THIS SOFTWARE, EVEN IF ADVISED OF THE POSSIBILITY OF SUCH DAMAGE. -** -***************************************************************************** -*/ - -/* Entry Point */ -ENTRY(Reset_Handler) - -/* Highest address of the user mode stack */ -_estack = ORIGIN(RAM) + LENGTH(RAM); /* end of "RAM" Ram type memory */ - -_Min_Heap_Size = 0x200 ; /* required amount of heap */ -_Min_Stack_Size = 0x400 ; /* required amount of stack */ - -/* Memories definition */ -MEMORY -{ - RAM (xrw) : ORIGIN = 0x20000000, LENGTH = 512K - FLASH (rx) : ORIGIN = 0x8000000, LENGTH = 2048K -} - -/* Sections */ -SECTIONS -{ - /* The startup code into "FLASH" Rom type memory */ - .isr_vector : - { - . = ALIGN(4); - KEEP(*(.isr_vector)) /* Startup code */ - . = ALIGN(4); - } >FLASH - - /* The program code and other data into "FLASH" Rom type memory */ - .text : - { - . = ALIGN(4); - *(.text) /* .text sections (code) */ - *(.text*) /* .text* sections (code) */ - *(.glue_7) /* glue arm to thumb code */ - *(.glue_7t) /* glue thumb to arm code */ - *(.eh_frame) - - KEEP (*(.init)) - KEEP (*(.fini)) - - . = ALIGN(4); - _etext = .; /* define a global symbols at end of code */ - } >FLASH - - /* Constant data into "FLASH" Rom type memory */ - .rodata : - { - . = ALIGN(4); - *(.rodata) /* .rodata sections (constants, strings, etc.) */ - *(.rodata*) /* .rodata* sections (constants, strings, etc.) */ - . = ALIGN(4); - } >FLASH - - .ARM.extab : { - . = ALIGN(4); - *(.ARM.extab* .gnu.linkonce.armextab.*) - . = ALIGN(4); - } >FLASH - - .ARM : { - . = ALIGN(4); - __exidx_start = .; - *(.ARM.exidx*) - __exidx_end = .; - . = ALIGN(4); - } >FLASH - - .preinit_array : - { - . = ALIGN(4); - PROVIDE_HIDDEN (__preinit_array_start = .); - KEEP (*(.preinit_array*)) - PROVIDE_HIDDEN (__preinit_array_end = .); - . = ALIGN(4); - } >FLASH - - .init_array : - { - . = ALIGN(4); - PROVIDE_HIDDEN (__init_array_start = .); - KEEP (*(SORT(.init_array.*))) - KEEP (*(.init_array*)) - PROVIDE_HIDDEN (__init_array_end = .); - . = ALIGN(4); - } >FLASH - - .fini_array : - { - . = ALIGN(4); - PROVIDE_HIDDEN (__fini_array_start = .); - KEEP (*(SORT(.fini_array.*))) - KEEP (*(.fini_array*)) - PROVIDE_HIDDEN (__fini_array_end = .); - . = ALIGN(4); - } >FLASH - - /* Used by the startup to initialize data */ - _sidata = LOADADDR(.data); - - /* Initialized data sections into "RAM" Ram type memory */ - .data : - { - . = ALIGN(4); - _sdata = .; /* create a global symbol at data start */ - *(.data) /* .data sections */ - *(.data*) /* .data* sections */ - - . = ALIGN(4); - _edata = .; /* define a global symbol at data end */ - - } >RAM AT> FLASH - - /* Uninitialized data section into "RAM" Ram type memory */ - . = ALIGN(4); - .bss : - { - /* This is used by the startup in order to initialize the .bss section */ - _sbss = .; /* define a global symbol at bss start */ - __bss_start__ = _sbss; - *(.bss) - *(.bss*) - *(COMMON) - - . = ALIGN(4); - _ebss = .; /* define a global symbol at bss end */ - __bss_end__ = _ebss; - } >RAM - - /* User_heap_stack section, used to check that there is enough "RAM" Ram type memory left */ - ._user_heap_stack : - { - . = ALIGN(8); - PROVIDE ( end = . ); - PROVIDE ( _end = . ); - . = . + _Min_Heap_Size; - . = . + _Min_Stack_Size; - . = ALIGN(8); - } >RAM - - /* Remove information from the compiler libraries */ - /DISCARD/ : - { - libc.a ( * ) - libm.a ( * ) - libgcc.a ( * ) - } - - .ARM.attributes 0 : { *(.ARM.attributes) } -} diff --git a/test_dma/STM32F767ZITX_RAM.ld b/test_dma/STM32F767ZITX_RAM.ld deleted file mode 100644 index 69a0c2a..0000000 --- a/test_dma/STM32F767ZITX_RAM.ld +++ /dev/null @@ -1,200 +0,0 @@ -/* -****************************************************************************** -** -** File : LinkerScript.ld (debug in RAM dedicated) -** -** Author : Auto-generated by STM32CubeIDE -** -** Abstract : Linker script for STM32F767ZITx Device from stm32f7 series -** 2048Kbytes FLASH -** 512Kbytes RAM -** -** Set heap size, stack size and stack location according -** to application requirements. -** -** Set memory bank area and size if external memory is used. -** -** Target : STMicroelectronics STM32 -** -** Distribution: The file is distributed as is without any warranty -** of any kind. -** -***************************************************************************** -** @attention -** -**

© COPYRIGHT(c) 2020 STMicroelectronics

-** -** Redistribution and use in source and binary forms, with or without modification, -** are permitted provided that the following conditions are met: -** 1. Redistributions of source code must retain the above copyright notice, -** this list of conditions and the following disclaimer. -** 2. Redistributions in binary form must reproduce the above copyright notice, -** this list of conditions and the following disclaimer in the documentation -** and/or other materials provided with the distribution. -** 3. Neither the name of STMicroelectronics nor the names of its contributors -** may be used to endorse or promote products derived from this software -** without specific prior written permission. -** -** THIS SOFTWARE IS PROVIDED BY THE COPYRIGHT HOLDERS AND CONTRIBUTORS "AS IS" -** AND ANY EXPRESS OR IMPLIED WARRANTIES, INCLUDING, BUT NOT LIMITED TO, THE -** IMPLIED WARRANTIES OF MERCHANTABILITY AND FITNESS FOR A PARTICULAR PURPOSE ARE -** DISCLAIMED. IN NO EVENT SHALL THE COPYRIGHT HOLDER OR CONTRIBUTORS BE LIABLE -** FOR ANY DIRECT, INDIRECT, INCIDENTAL, SPECIAL, EXEMPLARY, OR CONSEQUENTIAL -** DAMAGES (INCLUDING, BUT NOT LIMITED TO, PROCUREMENT OF SUBSTITUTE GOODS OR -** SERVICES; LOSS OF USE, DATA, OR PROFITS; OR BUSINESS INTERRUPTION) HOWEVER -** CAUSED AND ON ANY THEORY OF LIABILITY, WHETHER IN CONTRACT, STRICT LIABILITY, -** OR TORT (INCLUDING NEGLIGENCE OR OTHERWISE) ARISING IN ANY WAY OUT OF THE USE -** OF THIS SOFTWARE, EVEN IF ADVISED OF THE POSSIBILITY OF SUCH DAMAGE. -** -***************************************************************************** -*/ - -/* Entry Point */ -ENTRY(Reset_Handler) - -/* Highest address of the user mode stack */ -_estack = ORIGIN(RAM) + LENGTH(RAM); /* end of "RAM" Ram type memory */ - -_Min_Heap_Size = 0x200; /* required amount of heap */ -_Min_Stack_Size = 0x400; /* required amount of stack */ - -/* Memories definition */ -MEMORY -{ - RAM (xrw) : ORIGIN = 0x20000000, LENGTH = 512K - FLASH (rx) : ORIGIN = 0x8000000, LENGTH = 2048K -} - -/* Sections */ -SECTIONS -{ - /* The startup code into "RAM" Ram type memory */ - .isr_vector : - { - . = ALIGN(4); - KEEP(*(.isr_vector)) /* Startup code */ - . = ALIGN(4); - } >RAM - - /* The program code and other data into "RAM" Ram type memory */ - .text : - { - . = ALIGN(4); - *(.text) /* .text sections (code) */ - *(.text*) /* .text* sections (code) */ - *(.glue_7) /* glue arm to thumb code */ - *(.glue_7t) /* glue thumb to arm code */ - *(.eh_frame) - - KEEP (*(.init)) - KEEP (*(.fini)) - - . = ALIGN(4); - _etext = .; /* define a global symbols at end of code */ - } >RAM - - /* Constant data into "RAM" Ram type memory */ - .rodata : - { - . = ALIGN(4); - *(.rodata) /* .rodata sections (constants, strings, etc.) */ - *(.rodata*) /* .rodata* sections (constants, strings, etc.) */ - . = ALIGN(4); - } >RAM - - .ARM.extab : { - . = ALIGN(4); - *(.ARM.extab* .gnu.linkonce.armextab.*) - . = ALIGN(4); - } >RAM - - .ARM : { - . = ALIGN(4); - __exidx_start = .; - *(.ARM.exidx*) - __exidx_end = .; - . = ALIGN(4); - } >RAM - - .preinit_array : - { - . = ALIGN(4); - PROVIDE_HIDDEN (__preinit_array_start = .); - KEEP (*(.preinit_array*)) - PROVIDE_HIDDEN (__preinit_array_end = .); - . = ALIGN(4); - } >RAM - - .init_array : - { - . = ALIGN(4); - PROVIDE_HIDDEN (__init_array_start = .); - KEEP (*(SORT(.init_array.*))) - KEEP (*(.init_array*)) - PROVIDE_HIDDEN (__init_array_end = .); - . = ALIGN(4); - } >RAM - - .fini_array : - { - . = ALIGN(4); - PROVIDE_HIDDEN (__fini_array_start = .); - KEEP (*(SORT(.fini_array.*))) - KEEP (*(.fini_array*)) - PROVIDE_HIDDEN (__fini_array_end = .); - . = ALIGN(4); - } >RAM - - /* Used by the startup to initialize data */ - _sidata = LOADADDR(.data); - - /* Initialized data sections into "RAM" Ram type memory */ - .data : - { - . = ALIGN(4); - _sdata = .; /* create a global symbol at data start */ - *(.data) /* .data sections */ - *(.data*) /* .data* sections */ - - . = ALIGN(4); - _edata = .; /* define a global symbol at data end */ - - } >RAM - - /* Uninitialized data section into "RAM" Ram type memory */ - . = ALIGN(4); - .bss : - { - /* This is used by the startup in order to initialize the .bss section */ - _sbss = .; /* define a global symbol at bss start */ - __bss_start__ = _sbss; - *(.bss) - *(.bss*) - *(COMMON) - - . = ALIGN(4); - _ebss = .; /* define a global symbol at bss end */ - __bss_end__ = _ebss; - } >RAM - - /* User_heap_stack section, used to check that there is enough "RAM" Ram type memory left */ - ._user_heap_stack : - { - . = ALIGN(8); - PROVIDE ( end = . ); - PROVIDE ( _end = . ); - . = . + _Min_Heap_Size; - . = . + _Min_Stack_Size; - . = ALIGN(8); - } >RAM - - /* Remove information from the compiler libraries */ - /DISCARD/ : - { - libc.a ( * ) - libm.a ( * ) - libgcc.a ( * ) - } - - .ARM.attributes 0 : { *(.ARM.attributes) } -} diff --git a/test_dma/test_dma.ioc b/test_dma/test_dma.ioc deleted file mode 100644 index 721fdbe..0000000 --- a/test_dma/test_dma.ioc +++ /dev/null @@ -1,141 +0,0 @@ -#MicroXplorer Configuration settings - do not modify -Dma.Request0=USART6_RX -Dma.Request1=USART6_TX -Dma.RequestsNb=2 -Dma.USART6_RX.0.Direction=DMA_PERIPH_TO_MEMORY -Dma.USART6_RX.0.FIFOMode=DMA_FIFOMODE_DISABLE -Dma.USART6_RX.0.Instance=DMA2_Stream1 -Dma.USART6_RX.0.MemDataAlignment=DMA_MDATAALIGN_BYTE -Dma.USART6_RX.0.MemInc=DMA_MINC_ENABLE -Dma.USART6_RX.0.Mode=DMA_NORMAL -Dma.USART6_RX.0.PeriphDataAlignment=DMA_PDATAALIGN_BYTE -Dma.USART6_RX.0.PeriphInc=DMA_PINC_DISABLE -Dma.USART6_RX.0.Priority=DMA_PRIORITY_VERY_HIGH -Dma.USART6_RX.0.RequestParameters=Instance,Direction,PeriphInc,MemInc,PeriphDataAlignment,MemDataAlignment,Mode,Priority,FIFOMode -Dma.USART6_TX.1.Direction=DMA_MEMORY_TO_PERIPH -Dma.USART6_TX.1.FIFOMode=DMA_FIFOMODE_DISABLE -Dma.USART6_TX.1.Instance=DMA2_Stream6 -Dma.USART6_TX.1.MemDataAlignment=DMA_MDATAALIGN_BYTE -Dma.USART6_TX.1.MemInc=DMA_MINC_ENABLE -Dma.USART6_TX.1.Mode=DMA_NORMAL -Dma.USART6_TX.1.PeriphDataAlignment=DMA_PDATAALIGN_BYTE -Dma.USART6_TX.1.PeriphInc=DMA_PINC_DISABLE -Dma.USART6_TX.1.Priority=DMA_PRIORITY_VERY_HIGH -Dma.USART6_TX.1.RequestParameters=Instance,Direction,PeriphInc,MemInc,PeriphDataAlignment,MemDataAlignment,Mode,Priority,FIFOMode -File.Version=6 -KeepUserPlacement=false -Mcu.Family=STM32F7 -Mcu.IP0=CORTEX_M7 -Mcu.IP1=DMA -Mcu.IP2=NVIC -Mcu.IP3=RCC -Mcu.IP4=SYS -Mcu.IP5=USART6 -Mcu.IPNb=6 -Mcu.Name=STM32F767ZITx -Mcu.Package=LQFP144 -Mcu.Pin0=PC13 -Mcu.Pin1=PC6 -Mcu.Pin2=PC7 -Mcu.Pin3=VP_SYS_VS_Systick -Mcu.PinsNb=4 -Mcu.ThirdPartyNb=0 -Mcu.UserConstants= -Mcu.UserName=STM32F767ZITx -MxCube.Version=5.5.0 -MxDb.Version=DB.5.0.50 -NVIC.BusFault_IRQn=true\:0\:0\:false\:false\:true\:false\:false -NVIC.DMA2_Stream1_IRQn=true\:0\:0\:false\:false\:true\:false\:true -NVIC.DMA2_Stream6_IRQn=true\:0\:0\:false\:false\:true\:false\:true -NVIC.DebugMonitor_IRQn=true\:0\:0\:false\:false\:true\:false\:false -NVIC.EXTI15_10_IRQn=true\:0\:0\:false\:false\:true\:true\:true -NVIC.ForceEnableDMAVector=true -NVIC.HardFault_IRQn=true\:0\:0\:false\:false\:true\:false\:false -NVIC.MemoryManagement_IRQn=true\:0\:0\:false\:false\:true\:false\:false -NVIC.NonMaskableInt_IRQn=true\:0\:0\:false\:false\:true\:false\:false -NVIC.PendSV_IRQn=true\:0\:0\:false\:false\:true\:false\:false -NVIC.PriorityGroup=NVIC_PRIORITYGROUP_4 -NVIC.SVCall_IRQn=true\:0\:0\:false\:false\:true\:false\:false -NVIC.SysTick_IRQn=true\:0\:0\:false\:false\:true\:false\:true -NVIC.USART6_IRQn=true\:0\:0\:true\:false\:true\:true\:true -NVIC.UsageFault_IRQn=true\:0\:0\:false\:false\:true\:false\:false -PC13.Locked=true -PC13.Signal=GPXTI13 -PC6.Mode=Asynchronous -PC6.Signal=USART6_TX -PC7.Mode=Asynchronous -PC7.Signal=USART6_RX -PCC.Checker=false -PCC.Line=STM32F7x7 -PCC.MCU=STM32F767ZITx -PCC.PartNumber=STM32F767ZITx -PCC.Seq0=0 -PCC.Series=STM32F7 -PCC.Temperature=25 -PCC.Vdd=3.3 -PinOutPanel.RotationAngle=0 -ProjectManager.AskForMigrate=true -ProjectManager.BackupPrevious=false -ProjectManager.CompilerOptimize=6 -ProjectManager.ComputerToolchain=false -ProjectManager.CoupleFile=false -ProjectManager.CustomerFirmwarePackage= -ProjectManager.DefaultFWLocation=true -ProjectManager.DeletePrevious=true -ProjectManager.DeviceId=STM32F767ZITx -ProjectManager.FirmwarePackage=STM32Cube FW_F7 V1.15.0 -ProjectManager.FreePins=false -ProjectManager.HalAssertFull=false -ProjectManager.HeapSize=0x200 -ProjectManager.KeepUserCode=true -ProjectManager.LastFirmware=true -ProjectManager.LibraryCopy=1 -ProjectManager.MainLocation=Core/Src -ProjectManager.NoMain=false -ProjectManager.PreviousToolchain= -ProjectManager.ProjectBuild=false -ProjectManager.ProjectFileName=test_dma.ioc -ProjectManager.ProjectName=test_dma -ProjectManager.StackSize=0x400 -ProjectManager.TargetToolchain=STM32CubeIDE -ProjectManager.ToolChainLocation= -ProjectManager.UnderRoot=true -ProjectManager.functionlistsort=1-SystemClock_Config-RCC-false-HAL-false,2-MX_CORTEX_M7_Init-CORTEX_M7-false-HAL-true -RCC.CECFreq_Value=32786.88524590164 -RCC.DFSDMFreq_Value=16000000 -RCC.FamilyName=M -RCC.HSE_VALUE=25000000 -RCC.HSI_VALUE=16000000 -RCC.I2SFreq_Value=96000000 -RCC.IPParameters=CECFreq_Value,DFSDMFreq_Value,FamilyName,HSE_VALUE,HSI_VALUE,I2SFreq_Value,LCDTFTFreq_Value,LSE_VALUE,LSI_VALUE,PLLCLKFreq_Value,PLLI2SPCLKFreq_Value,PLLI2SQCLKFreq_Value,PLLI2SRCLKFreq_Value,PLLQCLKFreq_Value,PLLSAIPCLKFreq_Value,PLLSAIQCLKFreq_Value,PLLSAIRCLKFreq_Value,PLLSAIoutputFreq_Value,RNGFreq_Value,SAI1Freq_Value,SAI2Freq_Value,SDMMC2Freq_Value,SDMMCFreq_Value,SPDIFRXFreq_Value,USBFreq_Value,VCOI2SOutputFreq_Value,VCOInputFreq_Value,VCOOutputFreq_Value,VCOSAIOutputFreq_Value -RCC.LCDTFTFreq_Value=48000000 -RCC.LSE_VALUE=32768 -RCC.LSI_VALUE=32000 -RCC.PLLCLKFreq_Value=96000000 -RCC.PLLI2SPCLKFreq_Value=96000000 -RCC.PLLI2SQCLKFreq_Value=96000000 -RCC.PLLI2SRCLKFreq_Value=96000000 -RCC.PLLQCLKFreq_Value=96000000 -RCC.PLLSAIPCLKFreq_Value=96000000 -RCC.PLLSAIQCLKFreq_Value=96000000 -RCC.PLLSAIRCLKFreq_Value=96000000 -RCC.PLLSAIoutputFreq_Value=96000000 -RCC.RNGFreq_Value=96000000 -RCC.SAI1Freq_Value=96000000 -RCC.SAI2Freq_Value=96000000 -RCC.SDMMC2Freq_Value=16000000 -RCC.SDMMCFreq_Value=16000000 -RCC.SPDIFRXFreq_Value=96000000 -RCC.USBFreq_Value=96000000 -RCC.VCOI2SOutputFreq_Value=192000000 -RCC.VCOInputFreq_Value=1000000 -RCC.VCOOutputFreq_Value=192000000 -RCC.VCOSAIOutputFreq_Value=192000000 -SH.GPXTI13.0=GPIO_EXTI13 -SH.GPXTI13.ConfNb=1 -USART6.IPParameters=VirtualMode-Asynchronous -USART6.VirtualMode-Asynchronous=VM_ASYNC -VP_SYS_VS_Systick.Mode=SysTick -VP_SYS_VS_Systick.Signal=SYS_VS_Systick -board=custom -isbadioc=false -- 2.52.0